1 files changed, 65 insertions, 166 deletions

diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 6be89c032de..9d535c7336e 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-spear.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/io.h>
 #include "sdhci.h"
 
@@ -36,43 +37,15 @@ struct spear_sdhci {
 };
 
 /* sdhci ops */
-static struct sdhci_ops sdhci_pltfm_ops = {
-	/* Nothing to do for now. */
+static const struct sdhci_ops sdhci_pltfm_ops = {
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
-/* gpio card detection interrupt handler */
-static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
-{
-	struct platform_device *pdev = dev_id;
-	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
-	unsigned long gpio_irq_type;
-	int val;
-
-	val = gpio_get_value(sdhci->data->card_int_gpio);
-
-	/* val == 1 -> card removed, val == 0 -> card inserted */
-	/* if card removed - set irq for low level, else vice versa */
-	gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
-	irq_set_irq_type(irq, gpio_irq_type);
-
-	if (sdhci->data->card_power_gpio >= 0) {
-		if (!sdhci->data->power_always_enb) {
-			/* if card inserted, give power, otherwise remove it */
-			val = sdhci->data->power_active_high ? !val : val ;
-			gpio_set_value(sdhci->data->card_power_gpio, val);
-		}
-	}
-
-	/* inform sdhci driver about card insertion/removal */
-	tasklet_schedule(&host->card_tasklet);
-
-	return IRQ_HANDLED;
-}
-
 #ifdef CONFIG_OF
-static struct sdhci_plat_data * __devinit
-sdhci_probe_config_dt(struct platform_device *pdev)
+static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct sdhci_plat_data *pdata = NULL;
@@ -85,219 +58,145 @@ sdhci_probe_config_dt(struct platform_device *pdev)
 	/* If pdata is required */
 	if (cd_gpio != -1) {
 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-		if (!pdata) {
+		if (!pdata)
 			dev_err(&pdev->dev, "DT: kzalloc failed\n");
-			return ERR_PTR(-ENOMEM);
-		}
+		else
+			pdata->card_int_gpio = cd_gpio;
 	}
 
-	pdata->card_int_gpio = cd_gpio;
-
 	return pdata;
 }
 #else
-static struct sdhci_plat_data * __devinit
-sdhci_probe_config_dt(struct platform_device *pdev)
+static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
 {
 	return ERR_PTR(-ENOSYS);
 }
 #endif
 
-static int __devinit sdhci_probe(struct platform_device *pdev)
+static int sdhci_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct sdhci_host *host;
 	struct resource *iomem;
 	struct spear_sdhci *sdhci;
+	struct device *dev;
 	int ret;
 
-	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!iomem) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "memory resource not defined\n");
+	dev = pdev->dev.parent ? pdev->dev.parent : &pdev->dev;
+	host = sdhci_alloc_host(dev, sizeof(*sdhci));
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
 		goto err;
 	}
 
-	if (!devm_request_mem_region(&pdev->dev, iomem->start,
-				resource_size(iomem), "spear-sdhci")) {
-		ret = -EBUSY;
-		dev_dbg(&pdev->dev, "cannot request region\n");
-		goto err;
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
+	if (IS_ERR(host->ioaddr)) {
+		ret = PTR_ERR(host->ioaddr);
+		dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret);
+		goto err_host;
 	}
 
-	sdhci = devm_kzalloc(&pdev->dev, sizeof(*sdhci), GFP_KERNEL);
-	if (!sdhci) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
-		goto err;
-	}
+	host->hw_name = "sdhci";
+	host->ops = &sdhci_pltfm_ops;
+	host->irq = platform_get_irq(pdev, 0);
+	host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
+
+	sdhci = sdhci_priv(host);
 
 	/* clk enable */
-	sdhci->clk = clk_get(&pdev->dev, NULL);
+	sdhci->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(sdhci->clk)) {
 		ret = PTR_ERR(sdhci->clk);
 		dev_dbg(&pdev->dev, "Error getting clock\n");
-		goto err;
+		goto err_host;
 	}
 
 	ret = clk_prepare_enable(sdhci->clk);
 	if (ret) {
 		dev_dbg(&pdev->dev, "Error enabling clock\n");
-		goto put_clk;
+		goto err_host;
 	}
 
+	ret = clk_set_rate(sdhci->clk, 50000000);
+	if (ret)
+		dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n",
+				clk_get_rate(sdhci->clk));
+
 	if (np) {
 		sdhci->data = sdhci_probe_config_dt(pdev);
 		if (IS_ERR(sdhci->data)) {
 			dev_err(&pdev->dev, "DT: Failed to get pdata\n");
-			return -ENODEV;
+			goto disable_clk;
 		}
 	} else {
 		sdhci->data = dev_get_platdata(&pdev->dev);
 	}
 
-	pdev->dev.platform_data = sdhci;
-
-	if (pdev->dev.parent)
-		host = sdhci_alloc_host(pdev->dev.parent, 0);
-	else
-		host = sdhci_alloc_host(&pdev->dev, 0);
-
-	if (IS_ERR(host)) {
-		ret = PTR_ERR(host);
-		dev_dbg(&pdev->dev, "error allocating host\n");
-		goto disable_clk;
-	}
-
-	host->hw_name = "sdhci";
-	host->ops = &sdhci_pltfm_ops;
-	host->irq = platform_get_irq(pdev, 0);
-	host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
-
-	host->ioaddr = devm_ioremap(&pdev->dev, iomem->start,
-			resource_size(iomem));
-	if (!host->ioaddr) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "failed to remap registers\n");
-		goto free_host;
+	/*
+	 * It is optional to use GPIOs for sdhci card detection. If
+	 * sdhci->data is NULL, then use original sdhci lines otherwise
+	 * GPIO lines. We use the built-in GPIO support for this.
+	 */
+	if (sdhci->data && sdhci->data->card_int_gpio >= 0) {
+		ret = mmc_gpio_request_cd(host->mmc,
+					  sdhci->data->card_int_gpio, 0);
+		if (ret < 0) {
+			dev_dbg(&pdev->dev,
+				"failed to request card-detect gpio%d\n",
+				sdhci->data->card_int_gpio);
+			goto disable_clk;
+		}
 	}
 
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_dbg(&pdev->dev, "error adding host\n");
-		goto free_host;
+		goto disable_clk;
 	}
 
 	platform_set_drvdata(pdev, host);
 
-	/*
-	 * It is optional to use GPIOs for sdhci Power control & sdhci card
-	 * interrupt detection. If sdhci->data is NULL, then use original sdhci
-	 * lines otherwise GPIO lines.
-	 * If GPIO is selected for power control, then power should be disabled
-	 * after card removal and should be enabled when card insertion
-	 * interrupt occurs
-	 */
-	if (!sdhci->data)
-		return 0;
-
-	if (sdhci->data->card_power_gpio >= 0) {
-		int val = 0;
-
-		ret = devm_gpio_request(&pdev->dev,
-				sdhci->data->card_power_gpio, "sdhci");
-		if (ret < 0) {
-			dev_dbg(&pdev->dev, "gpio request fail: %d\n",
-					sdhci->data->card_power_gpio);
-			goto set_drvdata;
-		}
-
-		if (sdhci->data->power_always_enb)
-			val = sdhci->data->power_active_high;
-		else
-			val = !sdhci->data->power_active_high;
-
-		ret = gpio_direction_output(sdhci->data->card_power_gpio, val);
-		if (ret) {
-			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
-					sdhci->data->card_power_gpio);
-			goto set_drvdata;
-		}
-	}
-
-	if (sdhci->data->card_int_gpio >= 0) {
-		ret = devm_gpio_request(&pdev->dev, sdhci->data->card_int_gpio,
-				"sdhci");
-		if (ret < 0) {
-			dev_dbg(&pdev->dev, "gpio request fail: %d\n",
-					sdhci->data->card_int_gpio);
-			goto set_drvdata;
-		}
-
-		ret = gpio_direction_input(sdhci->data->card_int_gpio);
-		if (ret) {
-			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
-					sdhci->data->card_int_gpio);
-			goto set_drvdata;
-		}
-		ret = devm_request_irq(&pdev->dev,
-				gpio_to_irq(sdhci->data->card_int_gpio),
-				sdhci_gpio_irq, IRQF_TRIGGER_LOW,
-				mmc_hostname(host->mmc), pdev);
-		if (ret) {
-			dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
-					sdhci->data->card_int_gpio);
-			goto set_drvdata;
-		}
-
-	}
-
 	return 0;
 
-set_drvdata:
-	platform_set_drvdata(pdev, NULL);
-	sdhci_remove_host(host, 1);
-free_host:
-	sdhci_free_host(host);
 disable_clk:
 	clk_disable_unprepare(sdhci->clk);
-put_clk:
-	clk_put(sdhci->clk);
+err_host:
+	sdhci_free_host(host);
 err:
 	dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
 	return ret;
 }
 
-static int __devexit sdhci_remove(struct platform_device *pdev)
+static int sdhci_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
+	struct spear_sdhci *sdhci = sdhci_priv(host);
 	int dead = 0;
 	u32 scratch;
 
-	platform_set_drvdata(pdev, NULL);
 	scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
 	if (scratch == (u32)-1)
 		dead = 1;
 
 	sdhci_remove_host(host, dead);
-	sdhci_free_host(host);
 	clk_disable_unprepare(sdhci->clk);
-	clk_put(sdhci->clk);
+	sdhci_free_host(host);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int sdhci_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
-	struct spear_sdhci *sdhci = dev_get_platdata(dev);
+	struct spear_sdhci *sdhci = sdhci_priv(host);
 	int ret;
 
 	ret = sdhci_suspend_host(host);
 	if (!ret)
-		clk_disable_unprepare(sdhci->clk);
+		clk_disable(sdhci->clk);
 
 	return ret;
 }
@@ -305,10 +204,10 @@ static int sdhci_suspend(struct device *dev)
 static int sdhci_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
-	struct spear_sdhci *sdhci = dev_get_platdata(dev);
+	struct spear_sdhci *sdhci = sdhci_priv(host);
 	int ret;
 
-	ret = clk_prepare_enable(sdhci->clk);
+	ret = clk_enable(sdhci->clk);
 	if (ret) {
 		dev_dbg(dev, "Resume: Error enabling clock\n");
 		return ret;
@@ -336,7 +235,7 @@ static struct platform_driver sdhci_driver = {
 		.of_match_table = of_match_ptr(sdhci_spear_id_table),
 	},
 	.probe		= sdhci_probe,
-	.remove		= __devexit_p(sdhci_remove),
+	.remove		= sdhci_remove,
 };
 
 module_platform_driver(sdhci_driver);