1 files changed, 492 insertions, 158 deletions

diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 50997d2a63e..fa5954a0544 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -15,14 +15,20 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
+#include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/mmc/host.h>
 
-#include <plat/sdhci.h>
-#include <plat/regs-sdhci.h>
-
+#include "sdhci-s3c-regs.h"
 #include "sdhci.h"
 
 #define MAX_BUS_CLK	(4)
@@ -42,41 +48,33 @@ struct sdhci_s3c {
 	struct platform_device	*pdev;
 	struct resource		*ioarea;
 	struct s3c_sdhci_platdata *pdata;
-	unsigned int		cur_clk;
+	int			cur_clk;
+	int			ext_cd_irq;
+	int			ext_cd_gpio;
 
 	struct clk		*clk_io;
 	struct clk		*clk_bus[MAX_BUS_CLK];
-};
+	unsigned long		clk_rates[MAX_BUS_CLK];
 
-static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
-{
-	return sdhci_priv(host);
-}
+	bool			no_divider;
+};
 
 /**
- * get_curclk - convert ctrl2 register to clock source number
- * @ctrl2: Control2 register value.
+ * struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data
+ * @sdhci_quirks: sdhci host specific quirks.
+ *
+ * Specifies platform specific configuration of sdhci controller.
+ * Note: A structure for driver specific platform data is used for future
+ * expansion of its usage.
  */
-static u32 get_curclk(u32 ctrl2)
-{
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
-
-	return ctrl2;
-}
+struct sdhci_s3c_drv_data {
+	unsigned int	sdhci_quirks;
+	bool		no_divider;
+};
 
-static void sdhci_s3c_check_sclk(struct sdhci_host *host)
+static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
 {
-	struct sdhci_s3c *ourhost = to_s3c(host);
-	u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
-
-	if (get_curclk(tmp) != ourhost->cur_clk) {
-		dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
-
-		tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-		tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
-		writel(tmp, host->ioaddr + 0x80);
-	}
+	return sdhci_priv(host);
 }
 
 /**
@@ -88,20 +86,11 @@ static void sdhci_s3c_check_sclk(struct sdhci_host *host)
 static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
 {
 	struct sdhci_s3c *ourhost = to_s3c(host);
-	struct clk *busclk;
-	unsigned int rate, max;
-	int clk;
-
-	/* note, a reset will reset the clock source */
-
-	sdhci_s3c_check_sclk(host);
-
-	for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
-		busclk = ourhost->clk_bus[clk];
-		if (!busclk)
-			continue;
+	unsigned long rate, max = 0;
+	int src;
 
-		rate = clk_get_rate(busclk);
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		rate = ourhost->clk_rates[src];
 		if (rate > max)
 			max = rate;
 	}
@@ -109,11 +98,6 @@ static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
 	return max;
 }
 
-static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
-{
-	return sdhci_s3c_get_max_clk(host) / 1000000;
-}
-
 /**
  * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
  * @ourhost: Our SDHCI instance.
@@ -126,22 +110,38 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
 {
 	unsigned long rate;
 	struct clk *clksrc = ourhost->clk_bus[src];
-	int div;
+	int shift;
 
-	if (!clksrc)
+	if (IS_ERR(clksrc))
 		return UINT_MAX;
 
-	rate = clk_get_rate(clksrc);
+	/*
+	 * If controller uses a non-standard clock division, find the best clock
+	 * speed possible with selected clock source and skip the division.
+	 */
+	if (ourhost->no_divider) {
+		rate = clk_round_rate(clksrc, wanted);
+		return wanted - rate;
+	}
+
+	rate = ourhost->clk_rates[src];
 
-	for (div = 1; div < 256; div *= 2) {
-		if ((rate / div) <= wanted)
+	for (shift = 0; shift <= 8; ++shift) {
+		if ((rate >> shift) <= wanted)
 			break;
 	}
 
+	if (shift > 8) {
+		dev_dbg(&ourhost->pdev->dev,
+			"clk %d: rate %ld, min rate %lu > wanted %u\n",
+			src, rate, rate / 256, wanted);
+		return UINT_MAX;
+	}
+
 	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
-		src, rate, wanted, rate / div);
+		src, rate, wanted, rate >> shift);
 
-	return (wanted - (rate / div));
+	return wanted - (rate >> shift);
 }
 
 /**
@@ -161,9 +161,13 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
 	int src;
 	u32 ctrl;
 
+	host->mmc->actual_clock = 0;
+
 	/* don't bother if the clock is going off. */
-	if (clock == 0)
+	if (clock == 0) {
+		sdhci_set_clock(host, clock);
 		return;
+	}
 
 	for (src = 0; src < MAX_BUS_CLK; src++) {
 		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
@@ -178,52 +182,263 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
 		 best_src, clock, best);
 
 	/* select the new clock source */
-
 	if (ourhost->cur_clk != best_src) {
 		struct clk *clk = ourhost->clk_bus[best_src];
 
-		/* turn clock off to card before changing clock source */
-		writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+		clk_prepare_enable(clk);
+		if (ourhost->cur_clk >= 0)
+			clk_disable_unprepare(
+					ourhost->clk_bus[ourhost->cur_clk]);
 
 		ourhost->cur_clk = best_src;
-		host->max_clk = clk_get_rate(clk);
-		host->timeout_clk = sdhci_s3c_get_timeout_clk(host);
+		host->max_clk = ourhost->clk_rates[best_src];
+	}
 
-		ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
-		ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-		ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
-		writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+	/* turn clock off to card before changing clock source */
+	writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+	ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
+	/* reprogram default hardware configuration */
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
+		host->ioaddr + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+	ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
+	/* reconfigure the controller for new clock rate */
+	ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+	if (clock < 25 * 1000000)
+		ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
+
+	sdhci_set_clock(host, clock);
+}
+
+/**
+ * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
+ * @host: The SDHCI host being queried
+ *
+ * To init mmc host properly a minimal clock value is needed. For high system
+ * bus clock's values the standard formula gives values out of allowed range.
+ * The clock still can be set to lower values, if clock source other then
+ * system bus is selected.
+*/
+static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, min = ULONG_MAX;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		rate = ourhost->clk_rates[src] / 256;
+		if (!rate)
+			continue;
+		if (rate < min)
+			min = rate;
 	}
 
-	/* reconfigure the hardware for new clock rate */
+	return min;
+}
 
-	{
-		struct mmc_ios ios;
+/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
+static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, max = 0;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		struct clk *clk;
+
+		clk = ourhost->clk_bus[src];
+		if (IS_ERR(clk))
+			continue;
+
+		rate = clk_round_rate(clk, ULONG_MAX);
+		if (rate > max)
+			max = rate;
+	}
+
+	return max;
+}
+
+/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
+static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, min = ULONG_MAX;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		struct clk *clk;
+
+		clk = ourhost->clk_bus[src];
+		if (IS_ERR(clk))
+			continue;
+
+		rate = clk_round_rate(clk, 0);
+		if (rate < min)
+			min = rate;
+	}
+
+	return min;
+}
+
+/* sdhci_cmu_set_clock - callback on clock change.*/
+static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct device *dev = &ourhost->pdev->dev;
+	unsigned long timeout;
+	u16 clk = 0;
 
-		ios.clock = clock;
+	host->mmc->actual_clock = 0;
 
-		if (ourhost->pdata->cfg_card)
-			(ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr,
-						   &ios, NULL);
+	/* If the clock is going off, set to 0 at clock control register */
+	if (clock == 0) {
+		sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+		return;
 	}
+
+	sdhci_s3c_set_clock(host, clock);
+
+	clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+
+	clk = SDHCI_CLOCK_INT_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	/* Wait max 20 ms */
+	timeout = 20;
+	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+		& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			dev_err(dev, "%s: Internal clock never stabilised.\n",
+				mmc_hostname(host->mmc));
+			return;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	clk |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+/**
+ * sdhci_s3c_set_bus_width - support 8bit buswidth
+ * @host: The SDHCI host being queried
+ * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
+ *
+ * We have 8-bit width support but is not a v3 controller.
+ * So we add platform_bus_width() and support 8bit width.
+ */
+static void sdhci_s3c_set_bus_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+
+	switch (width) {
+	case MMC_BUS_WIDTH_8:
+		ctrl |= SDHCI_CTRL_8BITBUS;
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		break;
+	case MMC_BUS_WIDTH_4:
+		ctrl |= SDHCI_CTRL_4BITBUS;
+		ctrl &= ~SDHCI_CTRL_8BITBUS;
+		break;
+	default:
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		ctrl &= ~SDHCI_CTRL_8BITBUS;
+		break;
+	}
+
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 }
 
 static struct sdhci_ops sdhci_s3c_ops = {
 	.get_max_clock		= sdhci_s3c_get_max_clk,
-	.get_timeout_clock	= sdhci_s3c_get_timeout_clk,
 	.set_clock		= sdhci_s3c_set_clock,
+	.get_min_clock		= sdhci_s3c_get_min_clock,
+	.set_bus_width		= sdhci_s3c_set_bus_width,
+	.reset			= sdhci_reset,
+	.set_uhs_signaling	= sdhci_set_uhs_signaling,
 };
 
-static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static int sdhci_s3c_parse_dt(struct device *dev,
+		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+	struct device_node *node = dev->of_node;
+	u32 max_width;
+
+	/* if the bus-width property is not specified, assume width as 1 */
+	if (of_property_read_u32(node, "bus-width", &max_width))
+		max_width = 1;
+	pdata->max_width = max_width;
+
+	/* get the card detection method */
+	if (of_get_property(node, "broken-cd", NULL)) {
+		pdata->cd_type = S3C_SDHCI_CD_NONE;
+		return 0;
+	}
+
+	if (of_get_property(node, "non-removable", NULL)) {
+		pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
+		return 0;
+	}
+
+	if (of_get_named_gpio(node, "cd-gpios", 0))
+		return 0;
+
+	/* assuming internal card detect that will be configured by pinctrl */
+	pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
+	return 0;
+}
+#else
+static int sdhci_s3c_parse_dt(struct device *dev,
+		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+	return -EINVAL;
+}
+#endif
+
+static const struct of_device_id sdhci_s3c_dt_match[];
+
+static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
+			struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
+		return (struct sdhci_s3c_drv_data *)match->data;
+	}
+#endif
+	return (struct sdhci_s3c_drv_data *)
+			platform_get_device_id(pdev)->driver_data;
+}
+
+static int sdhci_s3c_probe(struct platform_device *pdev)
 {
-	struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
+	struct s3c_sdhci_platdata *pdata;
+	struct sdhci_s3c_drv_data *drv_data;
 	struct device *dev = &pdev->dev;
 	struct sdhci_host *host;
 	struct sdhci_s3c *sc;
 	struct resource *res;
 	int ret, irq, ptr, clks;
 
-	if (!pdata) {
+	if (!pdev->dev.platform_data && !pdev->dev.of_node) {
 		dev_err(dev, "no device data specified\n");
 		return -ENOENT;
 	}
@@ -234,55 +449,60 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 		return irq;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "no memory specified\n");
-		return -ENOENT;
-	}
-
 	host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
 	if (IS_ERR(host)) {
 		dev_err(dev, "sdhci_alloc_host() failed\n");
 		return PTR_ERR(host);
 	}
-
 	sc = sdhci_priv(host);
 
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		ret = -ENOMEM;
+		goto err_pdata_io_clk;
+	}
+
+	if (pdev->dev.of_node) {
+		ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
+		if (ret)
+			goto err_pdata_io_clk;
+	} else {
+		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+		sc->ext_cd_gpio = -1; /* invalid gpio number */
+	}
+
+	drv_data = sdhci_s3c_get_driver_data(pdev);
+
 	sc->host = host;
 	sc->pdev = pdev;
 	sc->pdata = pdata;
+	sc->cur_clk = -1;
 
 	platform_set_drvdata(pdev, host);
 
-	sc->clk_io = clk_get(dev, "hsmmc");
+	sc->clk_io = devm_clk_get(dev, "hsmmc");
 	if (IS_ERR(sc->clk_io)) {
 		dev_err(dev, "failed to get io clock\n");
 		ret = PTR_ERR(sc->clk_io);
-		goto err_io_clk;
+		goto err_pdata_io_clk;
 	}
 
 	/* enable the local io clock and keep it running for the moment. */
-	clk_enable(sc->clk_io);
+	clk_prepare_enable(sc->clk_io);
 
 	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
-		struct clk *clk;
-		char *name = pdata->clocks[ptr];
+		char name[14];
 
-		if (name == NULL)
+		snprintf(name, 14, "mmc_busclk.%d", ptr);
+		sc->clk_bus[ptr] = devm_clk_get(dev, name);
+		if (IS_ERR(sc->clk_bus[ptr]))
 			continue;
 
-		clk = clk_get(dev, name);
-		if (IS_ERR(clk)) {
-			dev_err(dev, "failed to get clock %s\n", name);
-			continue;
-		}
-
 		clks++;
-		sc->clk_bus[ptr] = clk;
-		clk_enable(clk);
+		sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
 
 		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
-			 ptr, name, clk_get_rate(clk));
+				ptr, name, sc->clk_rates[ptr]);
 	}
 
 	if (clks == 0) {
@@ -291,18 +511,10 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 		goto err_no_busclks;
 	}
 
-	sc->ioarea = request_mem_region(res->start, resource_size(res),
-					mmc_hostname(host->mmc));
-	if (!sc->ioarea) {
-		dev_err(dev, "failed to reserve register area\n");
-		ret = -ENXIO;
-		goto err_req_regs;
-	}
-
-	host->ioaddr = ioremap_nocache(res->start, resource_size(res));
-	if (!host->ioaddr) {
-		dev_err(dev, "failed to map registers\n");
-		ret = -ENXIO;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->ioaddr)) {
+		ret = PTR_ERR(host->ioaddr);
 		goto err_req_regs;
 	}
 
@@ -313,15 +525,16 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	host->hw_name = "samsung-hsmmc";
 	host->ops = &sdhci_s3c_ops;
 	host->quirks = 0;
+	host->quirks2 = 0;
 	host->irq = irq;
 
 	/* Setup quirks for the controller */
-
-	/* Currently with ADMA enabled we are getting some length
-	 * interrupts that are not being dealt with, do disable
-	 * ADMA until this is sorted out. */
-	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
-	host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE;
+	host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
+	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+	if (drv_data) {
+		host->quirks |= drv_data->sdhci_quirks;
+		sc->no_divider = drv_data->no_divider;
+	}
 
 #ifndef CONFIG_MMC_SDHCI_S3C_DMA
 
@@ -329,9 +542,6 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	 * support as well. */
 	host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
 
-	/* PIO currently has problems with multi-block IO */
-	host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
-
 #endif /* CONFIG_MMC_SDHCI_S3C_DMA */
 
 	/* It seems we do not get an DATA transfer complete on non-busy
@@ -339,88 +549,212 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	 * SDHCI block, or a missing configuration that needs to be set. */
 	host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
 
+	/* This host supports the Auto CMD12 */
+	host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+	/* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
+	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
+
+	if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
+	    pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+	if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+		host->mmc->caps = MMC_CAP_NONREMOVABLE;
+
+	switch (pdata->max_width) {
+	case 8:
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+	case 4:
+		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	}
+
+	if (pdata->pm_caps)
+		host->mmc->pm_caps |= pdata->pm_caps;
+
 	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
 			 SDHCI_QUIRK_32BIT_DMA_SIZE);
 
+	/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
+	host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+
+	/*
+	 * If controller does not have internal clock divider,
+	 * we can use overriding functions instead of default.
+	 */
+	if (sc->no_divider) {
+		sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
+		sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
+		sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
+	}
+
+	/* It supports additional host capabilities if needed */
+	if (pdata->host_caps)
+		host->mmc->caps |= pdata->host_caps;
+
+	if (pdata->host_caps2)
+		host->mmc->caps2 |= pdata->host_caps2;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+
+	mmc_of_parse(host->mmc);
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(dev, "sdhci_add_host() failed\n");
-		goto err_add_host;
+		pm_runtime_forbid(&pdev->dev);
+		pm_runtime_get_noresume(&pdev->dev);
+		goto err_req_regs;
 	}
 
+#ifdef CONFIG_PM_RUNTIME
+	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+		clk_disable_unprepare(sc->clk_io);
+#endif
 	return 0;
 
- err_add_host:
-	release_resource(sc->ioarea);
-	kfree(sc->ioarea);
-
  err_req_regs:
-	for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
-		clk_disable(sc->clk_bus[ptr]);
-		clk_put(sc->clk_bus[ptr]);
-	}
-
  err_no_busclks:
-	clk_disable(sc->clk_io);
-	clk_put(sc->clk_io);
+	clk_disable_unprepare(sc->clk_io);
 
- err_io_clk:
+ err_pdata_io_clk:
 	sdhci_free_host(host);
 
 	return ret;
 }
 
-static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
+static int sdhci_s3c_remove(struct platform_device *pdev)
 {
+	struct sdhci_host *host =  platform_get_drvdata(pdev);
+	struct sdhci_s3c *sc = sdhci_priv(host);
+
+	if (sc->ext_cd_irq)
+		free_irq(sc->ext_cd_irq, sc);
+
+#ifdef CONFIG_PM_RUNTIME
+	if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+		clk_prepare_enable(sc->clk_io);
+#endif
+	sdhci_remove_host(host, 1);
+
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	clk_disable_unprepare(sc->clk_io);
+
+	sdhci_free_host(host);
+
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_s3c_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_suspend_host(host);
+}
 
-static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm)
+static int sdhci_s3c_resume(struct device *dev)
 {
-	struct sdhci_host *host = platform_get_drvdata(dev);
+	struct sdhci_host *host = dev_get_drvdata(dev);
 
-	sdhci_suspend_host(host, pm);
-	return 0;
+	return sdhci_resume_host(host);
 }
+#endif
 
-static int sdhci_s3c_resume(struct platform_device *dev)
+#ifdef CONFIG_PM_RUNTIME
+static int sdhci_s3c_runtime_suspend(struct device *dev)
 {
-	struct sdhci_host *host = platform_get_drvdata(dev);
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct clk *busclk = ourhost->clk_io;
+	int ret;
 
-	sdhci_resume_host(host);
-	return 0;
+	ret = sdhci_runtime_suspend_host(host);
+
+	if (ourhost->cur_clk >= 0)
+		clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
+	clk_disable_unprepare(busclk);
+	return ret;
+}
+
+static int sdhci_s3c_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct clk *busclk = ourhost->clk_io;
+	int ret;
+
+	clk_prepare_enable(busclk);
+	if (ourhost->cur_clk >= 0)
+		clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
+	ret = sdhci_runtime_resume_host(host);
+	return ret;
 }
+#endif
 
+#ifdef CONFIG_PM
+static const struct dev_pm_ops sdhci_s3c_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
+	SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
+			   NULL)
+};
+
+#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
+
+#else
+#define SDHCI_S3C_PMOPS NULL
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
+static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
+	.no_divider = true,
+};
+#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)&exynos4_sdhci_drv_data)
 #else
-#define sdhci_s3c_suspend NULL
-#define sdhci_s3c_resume NULL
+#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)NULL)
+#endif
+
+static struct platform_device_id sdhci_s3c_driver_ids[] = {
+	{
+		.name		= "s3c-sdhci",
+		.driver_data	= (kernel_ulong_t)NULL,
+	}, {
+		.name		= "exynos4-sdhci",
+		.driver_data	= EXYNOS4_SDHCI_DRV_DATA,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_s3c_dt_match[] = {
+	{ .compatible = "samsung,s3c6410-sdhci", },
+	{ .compatible = "samsung,exynos4210-sdhci",
+		.data = (void *)EXYNOS4_SDHCI_DRV_DATA },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
 #endif
 
 static struct platform_driver sdhci_s3c_driver = {
 	.probe		= sdhci_s3c_probe,
-	.remove		= __devexit_p(sdhci_s3c_remove),
-	.suspend	= sdhci_s3c_suspend,
-	.resume	        = sdhci_s3c_resume,
+	.remove		= sdhci_s3c_remove,
+	.id_table	= sdhci_s3c_driver_ids,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "s3c-sdhci",
+		.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
+		.pm	= SDHCI_S3C_PMOPS,
 	},
 };
 
-static int __init sdhci_s3c_init(void)
-{
-	return platform_driver_register(&sdhci_s3c_driver);
-}
-
-static void __exit sdhci_s3c_exit(void)
-{
-	platform_driver_unregister(&sdhci_s3c_driver);
-}
-
-module_init(sdhci_s3c_init);
-module_exit(sdhci_s3c_exit);
+module_platform_driver(sdhci_s3c_driver);
 
 MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");