diff options
Diffstat (limited to 'drivers/mmc/host/atmel-mci.c')
| -rw-r--r-- | drivers/mmc/host/atmel-mci.c | 116 |
1 files changed, 38 insertions, 78 deletions
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 69e438ee043..bb585d94090 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -37,6 +37,7 @@ #include <linux/atmel-mci.h> #include <linux/atmel_pdc.h> +#include <asm/cacheflush.h> #include <asm/io.h> #include <asm/unaligned.h> @@ -255,7 +256,6 @@ struct atmel_mci_slot { #define ATMCI_CARD_PRESENT 0 #define ATMCI_CARD_NEED_INIT 1 #define ATMCI_SHUTDOWN 2 -#define ATMCI_SUSPENDED 3 int detect_pin; int wp_pin; @@ -589,6 +589,13 @@ static void atmci_timeout_timer(unsigned long data) if (host->mrq->cmd->data) { host->mrq->cmd->data->error = -ETIMEDOUT; host->data = NULL; + /* + * With some SDIO modules, sometimes DMA transfer hangs. If + * stop_transfer() is not called then the DMA request is not + * removed, following ones are queued and never computed. + */ + if (host->state == STATE_DATA_XFER) + host->stop_transfer(host); } else { host->mrq->cmd->error = -ETIMEDOUT; host->cmd = NULL; @@ -814,16 +821,9 @@ static void atmci_pdc_complete(struct atmel_mci *host) atmci_pdc_cleanup(host); - /* - * If the card was removed, data will be NULL. No point trying - * to send the stop command or waiting for NBUSY in this case. - */ - if (host->data) { - dev_dbg(&host->pdev->dev, - "(%s) set pending xfer complete\n", __func__); - atmci_set_pending(host, EVENT_XFER_COMPLETE); - tasklet_schedule(&host->tasklet); - } + dev_dbg(&host->pdev->dev, "(%s) set pending xfer complete\n", __func__); + atmci_set_pending(host, EVENT_XFER_COMPLETE); + tasklet_schedule(&host->tasklet); } static void atmci_dma_cleanup(struct atmel_mci *host) @@ -1186,11 +1186,22 @@ static void atmci_start_request(struct atmel_mci *host, iflags |= ATMCI_CMDRDY; cmd = mrq->cmd; cmdflags = atmci_prepare_command(slot->mmc, cmd); - atmci_send_command(host, cmd, cmdflags); + + /* + * DMA transfer should be started before sending the command to avoid + * unexpected errors especially for read operations in SDIO mode. + * Unfortunately, in PDC mode, command has to be sent before starting + * the transfer. + */ + if (host->submit_data != &atmci_submit_data_dma) + atmci_send_command(host, cmd, cmdflags); if (data) host->submit_data(host, data); + if (host->submit_data == &atmci_submit_data_dma) + atmci_send_command(host, cmd, cmdflags); + if (mrq->stop) { host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); host->stop_cmdr |= ATMCI_CMDR_STOP_XFER; @@ -1385,8 +1396,14 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk_unprepare(host->mck); switch (ios->power_mode) { + case MMC_POWER_OFF: + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + break; case MMC_POWER_UP: set_bit(ATMCI_CARD_NEED_INIT, &slot->flags); + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); break; default: /* @@ -1803,12 +1820,14 @@ static void atmci_tasklet_func(unsigned long priv) if (unlikely(status)) { host->stop_transfer(host); host->data = NULL; - if (status & ATMCI_DTOE) { - data->error = -ETIMEDOUT; - } else if (status & ATMCI_DCRCE) { - data->error = -EILSEQ; - } else { - data->error = -EIO; + if (data) { + if (status & ATMCI_DTOE) { + data->error = -ETIMEDOUT; + } else if (status & ATMCI_DCRCE) { + data->error = -EILSEQ; + } else { + data->error = -EIO; + } } } @@ -2196,6 +2215,7 @@ static int __init atmci_init_slot(struct atmel_mci *host, } host->slot[id] = slot; + mmc_regulator_get_supply(mmc); mmc_add_host(mmc); if (gpio_is_valid(slot->detect_pin)) { @@ -2520,70 +2540,10 @@ static int __exit atmci_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int atmci_suspend(struct device *dev) -{ - struct atmel_mci *host = dev_get_drvdata(dev); - int i; - - for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - struct atmel_mci_slot *slot = host->slot[i]; - int ret; - - if (!slot) - continue; - ret = mmc_suspend_host(slot->mmc); - if (ret < 0) { - while (--i >= 0) { - slot = host->slot[i]; - if (slot - && test_bit(ATMCI_SUSPENDED, &slot->flags)) { - mmc_resume_host(host->slot[i]->mmc); - clear_bit(ATMCI_SUSPENDED, &slot->flags); - } - } - return ret; - } else { - set_bit(ATMCI_SUSPENDED, &slot->flags); - } - } - - return 0; -} - -static int atmci_resume(struct device *dev) -{ - struct atmel_mci *host = dev_get_drvdata(dev); - int i; - int ret = 0; - - for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - struct atmel_mci_slot *slot = host->slot[i]; - int err; - - slot = host->slot[i]; - if (!slot) - continue; - if (!test_bit(ATMCI_SUSPENDED, &slot->flags)) - continue; - err = mmc_resume_host(slot->mmc); - if (err < 0) - ret = err; - else - clear_bit(ATMCI_SUSPENDED, &slot->flags); - } - - return ret; -} -#endif - -static SIMPLE_DEV_PM_OPS(atmci_pm, atmci_suspend, atmci_resume); - static struct platform_driver atmci_driver = { .remove = __exit_p(atmci_remove), .driver = { .name = "atmel_mci", - .pm = &atmci_pm, .of_match_table = of_match_ptr(atmci_dt_ids), }, }; |