diff options
Diffstat (limited to 'drivers/mmc/host/Kconfig')
| -rw-r--r-- | drivers/mmc/host/Kconfig | 468 |
1 files changed, 387 insertions, 81 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index ce1d28884e2..a5652548230 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -69,72 +69,181 @@ config MMC_SDHCI_PCI If unsure, say N. config MMC_RICOH_MMC - tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)" + bool "Ricoh MMC Controller Disabler" depends on MMC_SDHCI_PCI help - This selects the disabler for the Ricoh MMC Controller. This + This adds a pci quirk to disable Ricoh MMC Controller. This proprietary controller is unnecessary because the SDHCI driver supports MMC cards on the SD controller, but if it is not disabled, it will steal the MMC cards away - rendering them - useless. It is safe to select this driver even if you don't + useless. It is safe to select this even if you don't have a Ricoh based card reader. + If unsure, say Y. - To compile this driver as a module, choose M here: - the module will be called ricoh_mmc. +config MMC_SDHCI_ACPI + tristate "SDHCI support for ACPI enumerated SDHCI controllers" + depends on MMC_SDHCI && ACPI + help + This selects support for ACPI enumerated SDHCI controllers, + identified by ACPI Compatibility ID PNP0D40 or specific + ACPI Hardware IDs. - If unsure, say Y. + If you have a controller with this interface, say Y or M here. + + If unsure, say N. -config MMC_SDHCI_OF - tristate "SDHCI support on OpenFirmware platforms" - depends on MMC_SDHCI && PPC_OF +config MMC_SDHCI_PLTFM + tristate "SDHCI platform and OF driver helper" + depends on MMC_SDHCI help - This selects the OF support for Secure Digital Host Controller - Interfaces. + This selects the common helper functions support for Secure Digital + Host Controller Interface based platform and OF drivers. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_OF_ARASAN + tristate "SDHCI OF support for the Arasan SDHCI controllers" + depends on MMC_SDHCI_PLTFM + depends on OF + help + This selects the Arasan Secure Digital Host Controller Interface + (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC. + + If you have a controller with this interface, say Y or M here. If unsure, say N. config MMC_SDHCI_OF_ESDHC - bool "SDHCI OF support for the Freescale eSDHC controller" - depends on MMC_SDHCI_OF + tristate "SDHCI OF support for the Freescale eSDHC controller" + depends on MMC_SDHCI_PLTFM + depends on PPC_OF select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER help This selects the Freescale eSDHC controller support. + If you have a controller with this interface, say Y or M here. + If unsure, say N. config MMC_SDHCI_OF_HLWD - bool "SDHCI OF support for the Nintendo Wii SDHCI controllers" - depends on MMC_SDHCI_OF + tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers" + depends on MMC_SDHCI_PLTFM + depends on PPC_OF select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER help This selects the Secure Digital Host Controller Interface (SDHCI) found in the "Hollywood" chipset of the Nintendo Wii video game console. + If you have a controller with this interface, say Y or M here. + If unsure, say N. -config MMC_SDHCI_PLTFM - tristate "SDHCI support on the platform specific bus" - depends on MMC_SDHCI +config MMC_SDHCI_CNS3XXX + tristate "SDHCI support on the Cavium Networks CNS3xxx SoC" + depends on ARCH_CNS3XXX + depends on MMC_SDHCI_PLTFM help - This selects the platform specific bus support for Secure Digital Host - Controller Interface. + This selects the SDHCI support for CNS3xxx System-on-Chip devices. If you have a controller with this interface, say Y or M here. If unsure, say N. +config MMC_SDHCI_ESDHC_IMX + tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller" + depends on ARCH_MXC + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Freescale eSDHC/uSDHC controller support + found on i.MX25, i.MX35 i.MX5x and i.MX6x. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_DOVE + tristate "SDHCI support on Marvell's Dove SoC" + depends on ARCH_DOVE || MACH_DOVE + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Secure Digital Host Controller Interface in + Marvell's Dove SoC. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_TEGRA + tristate "SDHCI platform support for the Tegra SD/MMC Controller" + depends on ARCH_TEGRA + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Tegra SD/MMC controller. If you have a Tegra + platform with SD or MMC devices, say Y or M here. + + If unsure, say N. + config MMC_SDHCI_S3C tristate "SDHCI support on Samsung S3C SoC" - depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX) + depends on MMC_SDHCI && PLAT_SAMSUNG help This selects the Secure Digital Host Controller Interface (SDHCI) often referrered to as the HSMMC block in some of the Samsung S3C range of SoC. - Note, due to the problems with DMA, the DMA support is only - available with CONFIG_EXPERIMENTAL is selected. + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_SIRF + tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs" + depends on ARCH_SIRF + depends on MMC_SDHCI_PLTFM + help + This selects the SDHCI support for SiRF System-on-Chip devices. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_PXAV3 + tristate "Marvell MMP2 SD Host Controller support (PXAV3)" + depends on CLKDEV_LOOKUP + depends on MMC_SDHCI_PLTFM + default CPU_MMP2 + help + This selects the Marvell(R) PXAV3 SD Host Controller. + If you have a MMP2 platform with SD Host Controller + and a card slot, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_PXAV2 + tristate "Marvell PXA9XX SD Host Controller support (PXAV2)" + depends on CLKDEV_LOOKUP + depends on MMC_SDHCI_PLTFM + default CPU_PXA910 + help + This selects the Marvell(R) PXAV2 SD Host Controller. + If you have a PXA9XX platform with SD Host Controller + and a card slot, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_SPEAR + tristate "SDHCI support on ST SPEAr platform" + depends on MMC_SDHCI && PLAT_SPEAR + help + This selects the Secure Digital Host Controller Interface (SDHCI) + often referrered to as the HSMMC block in some of the ST SPEAR range + of SoC If you have a controller with this interface, say Y or M here. @@ -142,7 +251,7 @@ config MMC_SDHCI_S3C config MMC_SDHCI_S3C_DMA bool "DMA support on S3C SDHCI" - depends on MMC_SDHCI_S3C && EXPERIMENTAL + depends on MMC_SDHCI_S3C help Enable DMA support on the Samsung S3C SDHCI glue. The DMA has proved to be problematic if the controller encounters @@ -150,10 +259,41 @@ config MMC_SDHCI_S3C_DMA YMMV. +config MMC_SDHCI_BCM_KONA + tristate "SDHCI support on Broadcom KONA platform" + depends on ARCH_BCM_MOBILE + depends on MMC_SDHCI_PLTFM + help + This selects the Broadcom Kona Secure Digital Host Controller + Interface(SDHCI) support. + This is used in Broadcom mobile SoCs. + + If you have a controller with this interface, say Y or M here. + +config MMC_SDHCI_BCM2835 + tristate "SDHCI platform support for the BCM2835 SD/MMC Controller" + depends on ARCH_BCM2835 + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the BCM2835 SD/MMC controller. If you have a BCM2835 + platform with SD or MMC devices, say Y or M here. + + If unsure, say N. + +config MMC_MOXART + tristate "MOXART SD/MMC Host Controller support" + depends on ARCH_MOXART && MMC + help + This selects support for the MOXART SD/MMC Host Controller. + MOXA provides one multi-functional card reader which can + be found on some embedded hardware such as UC-7112-LX. + If you have a controller with this interface, say Y here. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP - select TPS65010 if MACH_OMAP_H2 + depends on TPS65010 || !MACH_OMAP_H2 help This selects the TI OMAP Multimedia card Interface. If you have an OMAP board with a Multimedia Card slot, @@ -163,11 +303,11 @@ config MMC_OMAP config MMC_OMAP_HS tristate "TI OMAP High Speed Multimedia Card Interface support" - depends on ARCH_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4 + depends on ARCH_OMAP2PLUS || COMPILE_TEST help This selects the TI OMAP High Speed Multimedia card Interface. - If you have an OMAP2430 or OMAP3 board or OMAP4 board with a - Multimedia Card slot, say Y or M here. + If you have an omap2plus board with a Multimedia Card slot, + say Y or M here. If unsure, say N. @@ -184,29 +324,15 @@ config MMC_WBSD config MMC_AU1X tristate "Alchemy AU1XX0 MMC Card Interface support" - depends on SOC_AU1200 + depends on MIPS_ALCHEMY help This selects the AMD Alchemy(R) Multimedia card interface. If you have a Alchemy platform with a MMC slot, say Y or M here. If unsure, say N. -choice - prompt "Atmel SD/MMC Driver" - default MMC_ATMELMCI if AVR32 - help - Choose which driver to use for the Atmel MCI Silicon - -config MMC_AT91 - tristate "AT91 SD/MMC Card Interface support" - depends on ARCH_AT91 - help - This selects the AT91 MCI controller. - - If unsure, say N. - config MMC_ATMELMCI - tristate "Atmel Multimedia Card Interface support" + tristate "Atmel SD/MMC Driver (Multimedia Card Interface)" depends on AVR32 || ARCH_AT91 help This selects the Atmel Multimedia Card Interface driver. If @@ -215,49 +341,49 @@ config MMC_ATMELMCI If unsure, say N. -endchoice - -config MMC_ATMELMCI_DMA - bool "Atmel MCI DMA support (EXPERIMENTAL)" - depends on MMC_ATMELMCI && AVR32 && DMA_ENGINE && EXPERIMENTAL +config MMC_SDHCI_MSM + tristate "Qualcomm SDHCI Controller Support" + depends on ARCH_QCOM + depends on MMC_SDHCI_PLTFM help - Say Y here to have the Atmel MCI driver use a DMA engine to - do data transfers and thus increase the throughput and - reduce the CPU utilization. Note that this is highly - experimental and may cause the driver to lock up. - - If unsure, say N. + This selects the Secure Digital Host Controller Interface (SDHCI) + support present in Qualcomm SOCs. The controller supports + SD/MMC/SDIO devices. -config MMC_IMX - tristate "Motorola i.MX Multimedia Card Interface support" - depends on ARCH_MX1 - help - This selects the Motorola i.MX Multimedia card Interface. - If you have a i.MX platform with a Multimedia Card slot, - say Y or M here. + If you have a controller with this interface, say Y or M here. If unsure, say N. -config MMC_MSM7X00A - tristate "Qualcomm MSM 7X00A SDCC Controller Support" - depends on MMC && ARCH_MSM +config MMC_MSM + tristate "Qualcomm SDCC Controller Support" + depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) help This provides support for the SD/MMC cell found in the - MSM 7X00A controllers from Qualcomm. + MSM and QSD SOCs from Qualcomm. The controller also has + support for SDIO devices. config MMC_MXC - tristate "Freescale i.MX2/3 Multimedia Card Interface support" - depends on ARCH_MXC + tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support" + depends on ARCH_MXC || PPC_MPC512x help - This selects the Freescale i.MX2/3 Multimedia card Interface. - If you have a i.MX platform with a Multimedia Card slot, - say Y or M here. + This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x + Multimedia Card Interface. If you have an i.MX or MPC512x platform + with a Multimedia Card slot, say Y or M here. + + If unsure, say N. + +config MMC_MXS + tristate "Freescale MXS Multimedia Card Interface support" + depends on ARCH_MXS && MXS_DMA + help + This selects the Freescale SSP MMC controller found on MXS based + platforms like mx23/28. If unsure, say N. config MMC_TIFM_SD - tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI + tristate "TI Flash Media MMC/SD Interface support" + depends on PCI select TIFM_CORE help Say Y here if you want to be able to access MMC/SD cards with @@ -290,6 +416,13 @@ config MMC_DAVINCI If you have an DAVINCI board with a Multimedia Card slot, say Y or M here. If unsure, say N. +config MMC_GOLDFISH + tristate "goldfish qemu Multimedia Card Interface support" + depends on GOLDFISH + help + This selects the Goldfish Multimedia card Interface emulation + found on the Goldfish Android virtual device emulation. + config MMC_SPI tristate "MMC/SD/SDIO over SPI" depends on SPI_MASTER && !HIGHMEM && HAS_DMA @@ -306,7 +439,7 @@ config MMC_SPI config MMC_S3C tristate "Samsung S3C SD/MMC Card Interface support" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX help This selects a driver for the MCI interface found in Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. @@ -336,8 +469,7 @@ config MMC_S3C_PIO the S3C MCI driver. config MMC_S3C_DMA - bool "Use DMA transfers only (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Use DMA transfers only" help Use DMA to transfer data between memory and the hardare. @@ -346,7 +478,7 @@ config MMC_S3C_DMA option is useful. config MMC_S3C_PIODMA - bool "Support for both PIO and DMA (EXPERIMENTAL)" + bool "Support for both PIO and DMA" help Compile both the PIO and DMA transfer routines into the driver and let the platform select at run-time which one @@ -357,8 +489,8 @@ config MMC_S3C_PIODMA endchoice config MMC_SDRICOH_CS - tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI && PCMCIA + tristate "MMC/SD driver for Ricoh Bay1Controllers" + depends on PCI && PCMCIA help Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA card whenever you insert a MMC or SD card into the card slot. @@ -366,13 +498,26 @@ config MMC_SDRICOH_CS To compile this driver as a module, choose M here: the module will be called sdricoh_cs. +config MMC_TMIO_CORE + tristate + config MMC_TMIO tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" - depends on MFD_TMIO || MFD_ASIC3 || SUPERH + depends on MFD_TMIO || MFD_ASIC3 + select MMC_TMIO_CORE help This provides support for the SD/MMC cell found in TC6393XB, T7L66XB and also HTC ASIC3 +config MMC_SDHI + tristate "SH-Mobile SDHI SD/SDIO controller support" + depends on SUPERH || ARM + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST + select MMC_TMIO_CORE + help + This provides support for the SDHI SD/SDIO controller found in + SuperH and ARM SH-Mobile SoCs + config MMC_CB710 tristate "ENE CB710 MMC/SD Interface support" depends on PCI @@ -399,7 +544,7 @@ config MMC_VIA_SDMMC config SDH_BFIN tristate "Blackfin Secure Digital Host support" - depends on MMC && ((BF54x && !BF544) || (BF51x && !BF512)) + depends on (BF54x && !BF544) || (BF51x && !BF512) help If you say yes here you will get support for the Blackfin on-chip Secure Digital Host interface. This includes support for MMC and @@ -415,3 +560,164 @@ config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND depends on SDH_BFIN help If you say yes here SD-Cards may work on the EZkit. + +config MMC_DW + tristate "Synopsys DesignWare Memory Card Interface" + depends on ARC || ARM + help + This selects support for the Synopsys DesignWare Mobile Storage IP + block, this provides host support for SD and MMC interfaces, in both + PIO and external DMA modes. + +config MMC_DW_IDMAC + bool "Internal DMAC interface" + depends on MMC_DW + help + This selects support for the internal DMAC block within the Synopsys + Designware Mobile Storage IP block. This disables the external DMA + interface. + +config MMC_DW_PLTFM + tristate "Synopsys Designware MCI Support as platform device" + depends on MMC_DW + default y + help + This selects the common helper functions support for Host Controller + Interface based platform driver. Please select this option if the IP + is present as a platform device. This is the common interface for the + Synopsys Designware IP. + + If you have a controller with this interface, say Y or M here. + + If unsure, say Y. + +config MMC_DW_EXYNOS + tristate "Exynos specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + help + This selects support for Samsung Exynos SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Exynos4 and Exynos5 SoC's. + +config MMC_DW_K3 + tristate "K3 specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + select MMC_DW_IDMAC + help + This selects support for Hisilicon K3 SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Hisilicon K3 SoC's. + +config MMC_DW_PCI + tristate "Synopsys Designware MCI support on PCI bus" + depends on MMC_DW && PCI + help + This selects the PCI bus for the Synopsys Designware Mobile Storage IP. + Select this option if the IP is present on PCI platform. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SH_MMCIF + tristate "SuperH Internal MMCIF support" + depends on MMC_BLOCK + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST + help + This selects the MMC Host Interface controller (MMCIF). + + This driver supports MMCIF in sh7724/sh7757/sh7372. + +config MMC_JZ4740 + tristate "JZ4740 SD/Multimedia Card Interface support" + depends on MACH_JZ4740 + help + This selects support for the SD/MMC controller on Ingenic JZ4740 + SoCs. + If you have a board based on such a SoC and with a SD/MMC slot, + say Y or M here. + +config MMC_VUB300 + tristate "VUB300 USB to SDIO/SD/MMC Host Controller support" + depends on USB + help + This selects support for Elan Digital Systems' VUB300 chip. + + The VUB300 is a USB-SDIO Host Controller Interface chip + that enables the host computer to use SDIO/SD/MMC cards + via a USB 2.0 or USB 1.1 host. + + The VUB300 chip will be found in both physically separate + USB to SDIO/SD/MMC adapters and embedded on some motherboards. + + The VUB300 chip supports SD and MMC memory cards in addition + to single and multifunction SDIO cards. + + Some SDIO cards will need a firmware file to be loaded and + sent to VUB300 chip in order to achieve better data throughput. + Download these "Offload Pseudocode" from Elan Digital Systems' + web-site http://www.elandigitalsystems.com/support/downloads.php + and put them in /lib/firmware. Note that without these additional + firmware files the VUB300 chip will still function, but not at + the best obtainable data rate. + + To compile this mmc host controller driver as a module, + choose M here: the module will be called vub300. + + If you have a computer with an embedded VUB300 chip + or if you intend connecting a USB adapter based on a + VUB300 chip say Y or M here. + +config MMC_USHC + tristate "USB SD Host Controller (USHC) support" + depends on USB + help + This selects support for USB SD Host Controllers based on + the Cypress Astoria chip with firmware compliant with CSR's + USB SD Host Controller specification (CS-118793-SP). + + CSR boards with this device include: USB<>SDIO (M1985v2), + and Ultrasira. + + Note: These controllers only support SDIO cards and do not + support MMC or SD memory cards. + +config MMC_WMT + tristate "Wondermedia SD/MMC Host Controller support" + depends on ARCH_VT8500 + default y + help + This selects support for the SD/MMC Host Controller on + Wondermedia WM8505/WM8650 based SoCs. + + To compile this driver as a module, choose M here: the + module will be called wmt-sdmmc. + +config MMC_USDHI6ROL0 + tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support" + help + This selects support for the Renesas USDHI6ROL0 SD/SDIO + Host Controller + +config MMC_REALTEK_PCI + tristate "Realtek PCI-E SD/MMC Card Interface Driver" + depends on MFD_RTSX_PCI + help + Say Y here to include driver code to support SD/MMC card interface + of Realtek PCI-E card reader + +config MMC_REALTEK_USB + tristate "Realtek USB SD/MMC Card Interface Driver" + depends on MFD_RTSX_USB + help + Say Y here to include driver code to support SD/MMC card interface + of Realtek RTS5129/39 series card reader + +config MMC_SUNXI + tristate "Allwinner sunxi SD/MMC Host Controller support" + depends on ARCH_SUNXI + help + This selects support for the SD/MMC Host Controller on + Allwinner sunxi SoCs. |