diff options
Diffstat (limited to 'drivers/mmc/host/Kconfig')
| -rw-r--r-- | drivers/mmc/host/Kconfig | 415 |
1 files changed, 324 insertions, 91 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index d618e867399..a5652548230 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -69,7 +69,7 @@ config MMC_SDHCI_PCI If unsure, say N. config MMC_RICOH_MMC - bool "Ricoh MMC Controller Disabler (EXPERIMENTAL)" + bool "Ricoh MMC Controller Disabler" depends on MMC_SDHCI_PCI help This adds a pci quirk to disable Ricoh MMC Controller. This @@ -81,62 +81,112 @@ config MMC_RICOH_MMC If unsure, say Y. -config MMC_SDHCI_OF - tristate "SDHCI support on OpenFirmware platforms" - depends on MMC_SDHCI && PPC_OF +config MMC_SDHCI_ACPI + tristate "SDHCI support for ACPI enumerated SDHCI controllers" + depends on MMC_SDHCI && ACPI help - This selects the OF support for Secure Digital Host Controller - Interfaces. + This selects support for ACPI enumerated SDHCI controllers, + identified by ACPI Compatibility ID PNP0D40 or specific + ACPI Hardware IDs. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_PLTFM + tristate "SDHCI platform and OF driver helper" + depends on MMC_SDHCI + help + This selects the common helper functions support for Secure Digital + Host Controller Interface based platform and OF drivers. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_OF_ARASAN + tristate "SDHCI OF support for the Arasan SDHCI controllers" + depends on MMC_SDHCI_PLTFM + depends on OF + help + This selects the Arasan Secure Digital Host Controller Interface + (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC. + + If you have a controller with this interface, say Y or M here. If unsure, say N. config MMC_SDHCI_OF_ESDHC - bool "SDHCI OF support for the Freescale eSDHC controller" - depends on MMC_SDHCI_OF + tristate "SDHCI OF support for the Freescale eSDHC controller" + depends on MMC_SDHCI_PLTFM + depends on PPC_OF select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER help This selects the Freescale eSDHC controller support. + If you have a controller with this interface, say Y or M here. + If unsure, say N. config MMC_SDHCI_OF_HLWD - bool "SDHCI OF support for the Nintendo Wii SDHCI controllers" - depends on MMC_SDHCI_OF + tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers" + depends on MMC_SDHCI_PLTFM + depends on PPC_OF select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER help This selects the Secure Digital Host Controller Interface (SDHCI) found in the "Hollywood" chipset of the Nintendo Wii video game console. - If unsure, say N. - -config MMC_SDHCI_PLTFM - tristate "SDHCI support on the platform specific bus" - depends on MMC_SDHCI - help - This selects the platform specific bus support for Secure Digital Host - Controller Interface. - If you have a controller with this interface, say Y or M here. If unsure, say N. config MMC_SDHCI_CNS3XXX - bool "SDHCI support on the Cavium Networks CNS3xxx SoC" + tristate "SDHCI support on the Cavium Networks CNS3xxx SoC" depends on ARCH_CNS3XXX depends on MMC_SDHCI_PLTFM help This selects the SDHCI support for CNS3xxx System-on-Chip devices. + If you have a controller with this interface, say Y or M here. + If unsure, say N. config MMC_SDHCI_ESDHC_IMX - bool "SDHCI platform support for the Freescale eSDHC i.MX controller" - depends on MMC_SDHCI_PLTFM && (ARCH_MX25 || ARCH_MX35 || ARCH_MX5) + tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller" + depends on ARCH_MXC + depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS help - This selects the Freescale eSDHC controller support on the platform - bus, found on platforms like mx35/51. + This selects the Freescale eSDHC/uSDHC controller support + found on i.MX25, i.MX35 i.MX5x and i.MX6x. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_DOVE + tristate "SDHCI support on Marvell's Dove SoC" + depends on ARCH_DOVE || MACH_DOVE + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Secure Digital Host Controller Interface in + Marvell's Dove SoC. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_TEGRA + tristate "SDHCI platform support for the Tegra SD/MMC Controller" + depends on ARCH_TEGRA + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Tegra SD/MMC controller. If you have a Tegra + platform with SD or MMC devices, say Y or M here. If unsure, say N. @@ -148,21 +198,41 @@ config MMC_SDHCI_S3C often referrered to as the HSMMC block in some of the Samsung S3C range of SoC. - Note, due to the problems with DMA, the DMA support is only - available with CONFIG_EXPERIMENTAL is selected. + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_SIRF + tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs" + depends on ARCH_SIRF + depends on MMC_SDHCI_PLTFM + help + This selects the SDHCI support for SiRF System-on-Chip devices. If you have a controller with this interface, say Y or M here. If unsure, say N. -config MMC_SDHCI_PXA - tristate "Marvell PXA168/PXA910/MMP2 SD Host Controller support" - depends on ARCH_PXA || ARCH_MMP - select MMC_SDHCI - select MMC_SDHCI_IO_ACCESSORS +config MMC_SDHCI_PXAV3 + tristate "Marvell MMP2 SD Host Controller support (PXAV3)" + depends on CLKDEV_LOOKUP + depends on MMC_SDHCI_PLTFM + default CPU_MMP2 help - This selects the Marvell(R) PXA168/PXA910/MMP2 SD Host Controller. - If you have a PXA168/PXA910/MMP2 platform with SD Host Controller + This selects the Marvell(R) PXAV3 SD Host Controller. + If you have a MMP2 platform with SD Host Controller + and a card slot, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_PXAV2 + tristate "Marvell PXA9XX SD Host Controller support (PXAV2)" + depends on CLKDEV_LOOKUP + depends on MMC_SDHCI_PLTFM + default CPU_PXA910 + help + This selects the Marvell(R) PXAV2 SD Host Controller. + If you have a PXA9XX platform with SD Host Controller and a card slot, say Y or M here. If unsure, say N. @@ -181,7 +251,7 @@ config MMC_SDHCI_SPEAR config MMC_SDHCI_S3C_DMA bool "DMA support on S3C SDHCI" - depends on MMC_SDHCI_S3C && EXPERIMENTAL + depends on MMC_SDHCI_S3C help Enable DMA support on the Samsung S3C SDHCI glue. The DMA has proved to be problematic if the controller encounters @@ -189,10 +259,41 @@ config MMC_SDHCI_S3C_DMA YMMV. +config MMC_SDHCI_BCM_KONA + tristate "SDHCI support on Broadcom KONA platform" + depends on ARCH_BCM_MOBILE + depends on MMC_SDHCI_PLTFM + help + This selects the Broadcom Kona Secure Digital Host Controller + Interface(SDHCI) support. + This is used in Broadcom mobile SoCs. + + If you have a controller with this interface, say Y or M here. + +config MMC_SDHCI_BCM2835 + tristate "SDHCI platform support for the BCM2835 SD/MMC Controller" + depends on ARCH_BCM2835 + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the BCM2835 SD/MMC controller. If you have a BCM2835 + platform with SD or MMC devices, say Y or M here. + + If unsure, say N. + +config MMC_MOXART + tristate "MOXART SD/MMC Host Controller support" + depends on ARCH_MOXART && MMC + help + This selects support for the MOXART SD/MMC Host Controller. + MOXA provides one multi-functional card reader which can + be found on some embedded hardware such as UC-7112-LX. + If you have a controller with this interface, say Y here. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP - select TPS65010 if MACH_OMAP_H2 + depends on TPS65010 || !MACH_OMAP_H2 help This selects the TI OMAP Multimedia card Interface. If you have an OMAP board with a Multimedia Card slot, @@ -202,11 +303,11 @@ config MMC_OMAP config MMC_OMAP_HS tristate "TI OMAP High Speed Multimedia Card Interface support" - depends on ARCH_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4 + depends on ARCH_OMAP2PLUS || COMPILE_TEST help This selects the TI OMAP High Speed Multimedia card Interface. - If you have an OMAP2430 or OMAP3 board or OMAP4 board with a - Multimedia Card slot, say Y or M here. + If you have an omap2plus board with a Multimedia Card slot, + say Y or M here. If unsure, say N. @@ -223,30 +324,15 @@ config MMC_WBSD config MMC_AU1X tristate "Alchemy AU1XX0 MMC Card Interface support" - depends on SOC_AU1200 + depends on MIPS_ALCHEMY help This selects the AMD Alchemy(R) Multimedia card interface. If you have a Alchemy platform with a MMC slot, say Y or M here. If unsure, say N. -choice - prompt "Atmel SD/MMC Driver" - depends on AVR32 || ARCH_AT91 - default MMC_ATMELMCI if AVR32 - help - Choose which driver to use for the Atmel MCI Silicon - -config MMC_AT91 - tristate "AT91 SD/MMC Card Interface support" - depends on ARCH_AT91 - help - This selects the AT91 MCI controller. - - If unsure, say N. - config MMC_ATMELMCI - tristate "Atmel Multimedia Card Interface support" + tristate "Atmel SD/MMC Driver (Multimedia Card Interface)" depends on AVR32 || ARCH_AT91 help This selects the Atmel Multimedia Card Interface driver. If @@ -255,50 +341,49 @@ config MMC_ATMELMCI If unsure, say N. -endchoice - -config MMC_ATMELMCI_DMA - bool "Atmel MCI DMA support (EXPERIMENTAL)" - depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE && EXPERIMENTAL +config MMC_SDHCI_MSM + tristate "Qualcomm SDHCI Controller Support" + depends on ARCH_QCOM + depends on MMC_SDHCI_PLTFM help - Say Y here to have the Atmel MCI driver use a DMA engine to - do data transfers and thus increase the throughput and - reduce the CPU utilization. Note that this is highly - experimental and may cause the driver to lock up. - - If unsure, say N. + This selects the Secure Digital Host Controller Interface (SDHCI) + support present in Qualcomm SOCs. The controller supports + SD/MMC/SDIO devices. -config MMC_IMX - tristate "Motorola i.MX Multimedia Card Interface support" - depends on ARCH_MX1 - help - This selects the Motorola i.MX Multimedia card Interface. - If you have a i.MX platform with a Multimedia Card slot, - say Y or M here. + If you have a controller with this interface, say Y or M here. If unsure, say N. config MMC_MSM tristate "Qualcomm SDCC Controller Support" - depends on MMC && ARCH_MSM + depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) help This provides support for the SD/MMC cell found in the MSM and QSD SOCs from Qualcomm. The controller also has support for SDIO devices. config MMC_MXC - tristate "Freescale i.MX2/3 Multimedia Card Interface support" - depends on ARCH_MXC + tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support" + depends on ARCH_MXC || PPC_MPC512x help - This selects the Freescale i.MX2/3 Multimedia card Interface. - If you have a i.MX platform with a Multimedia Card slot, - say Y or M here. + This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x + Multimedia Card Interface. If you have an i.MX or MPC512x platform + with a Multimedia Card slot, say Y or M here. + + If unsure, say N. + +config MMC_MXS + tristate "Freescale MXS Multimedia Card Interface support" + depends on ARCH_MXS && MXS_DMA + help + This selects the Freescale SSP MMC controller found on MXS based + platforms like mx23/28. If unsure, say N. config MMC_TIFM_SD - tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI + tristate "TI Flash Media MMC/SD Interface support" + depends on PCI select TIFM_CORE help Say Y here if you want to be able to access MMC/SD cards with @@ -331,6 +416,13 @@ config MMC_DAVINCI If you have an DAVINCI board with a Multimedia Card slot, say Y or M here. If unsure, say N. +config MMC_GOLDFISH + tristate "goldfish qemu Multimedia Card Interface support" + depends on GOLDFISH + help + This selects the Goldfish Multimedia card Interface emulation + found on the Goldfish Android virtual device emulation. + config MMC_SPI tristate "MMC/SD/SDIO over SPI" depends on SPI_MASTER && !HIGHMEM && HAS_DMA @@ -347,7 +439,7 @@ config MMC_SPI config MMC_S3C tristate "Samsung S3C SD/MMC Card Interface support" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX help This selects a driver for the MCI interface found in Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. @@ -377,8 +469,7 @@ config MMC_S3C_PIO the S3C MCI driver. config MMC_S3C_DMA - bool "Use DMA transfers only (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Use DMA transfers only" help Use DMA to transfer data between memory and the hardare. @@ -387,7 +478,7 @@ config MMC_S3C_DMA option is useful. config MMC_S3C_PIODMA - bool "Support for both PIO and DMA (EXPERIMENTAL)" + bool "Support for both PIO and DMA" help Compile both the PIO and DMA transfer routines into the driver and let the platform select at run-time which one @@ -398,8 +489,8 @@ config MMC_S3C_PIODMA endchoice config MMC_SDRICOH_CS - tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI && PCMCIA + tristate "MMC/SD driver for Ricoh Bay1Controllers" + depends on PCI && PCMCIA help Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA card whenever you insert a MMC or SD card into the card slot. @@ -407,17 +498,29 @@ config MMC_SDRICOH_CS To compile this driver as a module, choose M here: the module will be called sdricoh_cs. +config MMC_TMIO_CORE + tristate + config MMC_TMIO tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" - depends on MFD_TMIO || MFD_ASIC3 || MFD_SH_MOBILE_SDHI + depends on MFD_TMIO || MFD_ASIC3 + select MMC_TMIO_CORE help This provides support for the SD/MMC cell found in TC6393XB, T7L66XB and also HTC ASIC3 +config MMC_SDHI + tristate "SH-Mobile SDHI SD/SDIO controller support" + depends on SUPERH || ARM + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST + select MMC_TMIO_CORE + help + This provides support for the SDHI SD/SDIO controller found in + SuperH and ARM SH-Mobile SoCs + config MMC_CB710 tristate "ENE CB710 MMC/SD Interface support" depends on PCI - select MISC_DEVICES select CB710_CORE help This option enables support for MMC/SD part of ENE CB710/720 Flash @@ -458,11 +561,72 @@ config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND help If you say yes here SD-Cards may work on the EZkit. +config MMC_DW + tristate "Synopsys DesignWare Memory Card Interface" + depends on ARC || ARM + help + This selects support for the Synopsys DesignWare Mobile Storage IP + block, this provides host support for SD and MMC interfaces, in both + PIO and external DMA modes. + +config MMC_DW_IDMAC + bool "Internal DMAC interface" + depends on MMC_DW + help + This selects support for the internal DMAC block within the Synopsys + Designware Mobile Storage IP block. This disables the external DMA + interface. + +config MMC_DW_PLTFM + tristate "Synopsys Designware MCI Support as platform device" + depends on MMC_DW + default y + help + This selects the common helper functions support for Host Controller + Interface based platform driver. Please select this option if the IP + is present as a platform device. This is the common interface for the + Synopsys Designware IP. + + If you have a controller with this interface, say Y or M here. + + If unsure, say Y. + +config MMC_DW_EXYNOS + tristate "Exynos specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + help + This selects support for Samsung Exynos SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Exynos4 and Exynos5 SoC's. + +config MMC_DW_K3 + tristate "K3 specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + select MMC_DW_IDMAC + help + This selects support for Hisilicon K3 SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Hisilicon K3 SoC's. + +config MMC_DW_PCI + tristate "Synopsys Designware MCI support on PCI bus" + depends on MMC_DW && PCI + help + This selects the PCI bus for the Synopsys Designware Mobile Storage IP. + Select this option if the IP is present on PCI platform. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_SH_MMCIF tristate "SuperH Internal MMCIF support" - depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE) + depends on MMC_BLOCK + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST help - This selects the MMC Host Interface controler (MMCIF). + This selects the MMC Host Interface controller (MMCIF). This driver supports MMCIF in sh7724/sh7757/sh7372. @@ -475,6 +639,37 @@ config MMC_JZ4740 If you have a board based on such a SoC and with a SD/MMC slot, say Y or M here. +config MMC_VUB300 + tristate "VUB300 USB to SDIO/SD/MMC Host Controller support" + depends on USB + help + This selects support for Elan Digital Systems' VUB300 chip. + + The VUB300 is a USB-SDIO Host Controller Interface chip + that enables the host computer to use SDIO/SD/MMC cards + via a USB 2.0 or USB 1.1 host. + + The VUB300 chip will be found in both physically separate + USB to SDIO/SD/MMC adapters and embedded on some motherboards. + + The VUB300 chip supports SD and MMC memory cards in addition + to single and multifunction SDIO cards. + + Some SDIO cards will need a firmware file to be loaded and + sent to VUB300 chip in order to achieve better data throughput. + Download these "Offload Pseudocode" from Elan Digital Systems' + web-site http://www.elandigitalsystems.com/support/downloads.php + and put them in /lib/firmware. Note that without these additional + firmware files the VUB300 chip will still function, but not at + the best obtainable data rate. + + To compile this mmc host controller driver as a module, + choose M here: the module will be called vub300. + + If you have a computer with an embedded VUB300 chip + or if you intend connecting a USB adapter based on a + VUB300 chip say Y or M here. + config MMC_USHC tristate "USB SD Host Controller (USHC) support" depends on USB @@ -488,3 +683,41 @@ config MMC_USHC Note: These controllers only support SDIO cards and do not support MMC or SD memory cards. + +config MMC_WMT + tristate "Wondermedia SD/MMC Host Controller support" + depends on ARCH_VT8500 + default y + help + This selects support for the SD/MMC Host Controller on + Wondermedia WM8505/WM8650 based SoCs. + + To compile this driver as a module, choose M here: the + module will be called wmt-sdmmc. + +config MMC_USDHI6ROL0 + tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support" + help + This selects support for the Renesas USDHI6ROL0 SD/SDIO + Host Controller + +config MMC_REALTEK_PCI + tristate "Realtek PCI-E SD/MMC Card Interface Driver" + depends on MFD_RTSX_PCI + help + Say Y here to include driver code to support SD/MMC card interface + of Realtek PCI-E card reader + +config MMC_REALTEK_USB + tristate "Realtek USB SD/MMC Card Interface Driver" + depends on MFD_RTSX_USB + help + Say Y here to include driver code to support SD/MMC card interface + of Realtek RTS5129/39 series card reader + +config MMC_SUNXI + tristate "Allwinner sunxi SD/MMC Host Controller support" + depends on ARCH_SUNXI + help + This selects support for the SD/MMC Host Controller on + Allwinner sunxi SoCs. |