1 files changed, 85 insertions, 96 deletions

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 6889a821c1d..e636d9e99e4 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -363,7 +363,7 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
 {
 	unsigned max_dtr;
 
-	if (mmc_card_highspeed(card)) {
+	if (mmc_card_hs(card)) {
 		/*
 		 * The SDIO specification doesn't mention how
 		 * the CIS transfer speed register relates to
@@ -563,10 +563,18 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card)
 	if (err)
 		goto out;
 
-	/* Initialize and start re-tuning timer */
-	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
+	/*
+	 * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
+	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
+	 */
+	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning &&
+			((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) ||
+			 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104))) {
+		mmc_host_clk_hold(card->host);
 		err = card->host->ops->execute_tuning(card->host,
 						      MMC_SEND_TUNING_BLOCK);
+		mmc_host_clk_release(card->host);
+	}
 
 out:
 
@@ -585,23 +593,28 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	struct mmc_card *card;
 	int err;
 	int retries = 10;
+	u32 rocr = 0;
+	u32 ocr_card = ocr;
 
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
+	/* to query card if 1.8V signalling is supported */
+	if (mmc_host_uhs(host))
+		ocr |= R4_18V_PRESENT;
+
 try_again:
 	if (!retries) {
 		pr_warning("%s: Skipping voltage switch\n",
 				mmc_hostname(host));
 		ocr &= ~R4_18V_PRESENT;
-		host->ocr &= ~R4_18V_PRESENT;
 	}
 
 	/*
 	 * Inform the card of the voltage
 	 */
 	if (!powered_resume) {
-		err = mmc_send_io_op_cond(host, host->ocr, &ocr);
+		err = mmc_send_io_op_cond(host, ocr, &rocr);
 		if (err)
 			goto err;
 	}
@@ -624,8 +637,8 @@ try_again:
 		goto err;
 	}
 
-	if ((ocr & R4_MEMORY_PRESENT) &&
-	    mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid, NULL) == 0) {
+	if ((rocr & R4_MEMORY_PRESENT) &&
+	    mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) {
 		card->type = MMC_TYPE_SD_COMBO;
 
 		if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
@@ -655,8 +668,9 @@ try_again:
 	 * systems that claim 1.8v signalling in fact do not support
 	 * it.
 	 */
-	if (!powered_resume && (ocr & R4_18V_PRESENT) && mmc_host_uhs(host)) {
-		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+	if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) {
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
+					ocr);
 		if (err == -EAGAIN) {
 			sdio_reset(host);
 			mmc_go_idle(host);
@@ -666,12 +680,10 @@ try_again:
 			goto try_again;
 		} else if (err) {
 			ocr &= ~R4_18V_PRESENT;
-			host->ocr &= ~R4_18V_PRESENT;
 		}
 		err = 0;
 	} else {
 		ocr &= ~R4_18V_PRESENT;
-		host->ocr &= ~R4_18V_PRESENT;
 	}
 
 	/*
@@ -721,7 +733,6 @@ try_again:
 		mmc_set_clock(host, card->cis.max_dtr);
 
 		if (card->cccr.high_speed) {
-			mmc_card_set_highspeed(card);
 			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
 		}
 
@@ -751,6 +762,7 @@ try_again:
 
 		card = oldcard;
 	}
+	card->ocr = ocr_card;
 	mmc_fixup_device(card, NULL);
 
 	if (card->type == MMC_TYPE_SD_COMBO) {
@@ -779,16 +791,13 @@ try_again:
 		err = mmc_sdio_init_uhs_card(card);
 		if (err)
 			goto remove;
-
-		/* Card is an ultra-high-speed card */
-		mmc_card_set_uhs(card);
 	} else {
 		/*
 		 * Switch to high-speed (if supported).
 		 */
 		err = sdio_enable_hs(card);
 		if (err > 0)
-			mmc_sd_go_highspeed(card);
+			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
 		else if (err)
 			goto remove;
 
@@ -902,11 +911,11 @@ out:
 }
 
 /*
- * SDIO suspend.  We need to suspend all functions separately.
+ * SDIO pre_suspend.  We need to suspend all functions separately.
  * Therefore all registered functions must have drivers with suspend
  * and resume methods.  Failing that we simply remove the whole card.
  */
-static int mmc_sdio_suspend(struct mmc_host *host)
+static int mmc_sdio_pre_suspend(struct mmc_host *host)
 {
 	int i, err = 0;
 
@@ -917,32 +926,34 @@ static int mmc_sdio_suspend(struct mmc_host *host)
 			if (!pmops || !pmops->suspend || !pmops->resume) {
 				/* force removal of entire card in that case */
 				err = -ENOSYS;
-			} else
-				err = pmops->suspend(&func->dev);
-			if (err)
 				break;
+			}
 		}
 	}
-	while (err && --i >= 0) {
-		struct sdio_func *func = host->card->sdio_func[i];
-		if (func && sdio_func_present(func) && func->dev.driver) {
-			const struct dev_pm_ops *pmops = func->dev.driver->pm;
-			pmops->resume(&func->dev);
-		}
-	}
 
-	if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
+	return err;
+}
+
+/*
+ * SDIO suspend.  Suspend all functions separately.
+ */
+static int mmc_sdio_suspend(struct mmc_host *host)
+{
+	if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
 		mmc_claim_host(host);
 		sdio_disable_wide(host->card);
 		mmc_release_host(host);
 	}
 
-	return err;
+	if (!mmc_card_keep_power(host))
+		mmc_power_off(host);
+
+	return 0;
 }
 
 static int mmc_sdio_resume(struct mmc_host *host)
 {
-	int i, err = 0;
+	int err = 0;
 
 	BUG_ON(!host);
 	BUG_ON(!host->card);
@@ -950,11 +961,27 @@ static int mmc_sdio_resume(struct mmc_host *host)
 	/* Basic card reinitialization. */
 	mmc_claim_host(host);
 
+	/* Restore power if needed */
+	if (!mmc_card_keep_power(host)) {
+		mmc_power_up(host, host->card->ocr);
+		/*
+		 * Tell runtime PM core we just powered up the card,
+		 * since it still believes the card is powered off.
+		 * Note that currently runtime PM is only enabled
+		 * for SDIO cards that are MMC_CAP_POWER_OFF_CARD
+		 */
+		if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+			pm_runtime_disable(&host->card->dev);
+			pm_runtime_set_active(&host->card->dev);
+			pm_runtime_enable(&host->card->dev);
+		}
+	}
+
 	/* No need to reinitialize powered-resumed nonremovable cards */
 	if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
 		sdio_reset(host);
 		mmc_go_idle(host);
-		err = mmc_sdio_init_card(host, host->ocr, host->card,
+		err = mmc_sdio_init_card(host, host->card->ocr, host->card,
 					mmc_card_keep_power(host));
 	} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
 		/* We may have switched to 1-bit mode during suspend */
@@ -969,31 +996,13 @@ static int mmc_sdio_resume(struct mmc_host *host)
 		wake_up_process(host->sdio_irq_thread);
 	mmc_release_host(host);
 
-	/*
-	 * If the card looked to be the same as before suspending, then
-	 * we proceed to resume all card functions.  If one of them returns
-	 * an error then we simply return that error to the core and the
-	 * card will be redetected as new.  It is the responsibility of
-	 * the function driver to perform further tests with the extra
-	 * knowledge it has of the card to confirm the card is indeed the
-	 * same as before suspending (same MAC address for network cards,
-	 * etc.) and return an error otherwise.
-	 */
-	for (i = 0; !err && i < host->card->sdio_funcs; i++) {
-		struct sdio_func *func = host->card->sdio_func[i];
-		if (func && sdio_func_present(func) && func->dev.driver) {
-			const struct dev_pm_ops *pmops = func->dev.driver->pm;
-			err = pmops->resume(&func->dev);
-		}
-	}
-
+	host->pm_flags &= ~MMC_PM_KEEP_POWER;
 	return err;
 }
 
 static int mmc_sdio_power_restore(struct mmc_host *host)
 {
 	int ret;
-	u32 ocr;
 
 	BUG_ON(!host);
 	BUG_ON(!host->card);
@@ -1015,32 +1024,17 @@ static int mmc_sdio_power_restore(struct mmc_host *host)
 	 * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
 	 * harmless in other situations.
 	 *
-	 * With these steps taken, mmc_select_voltage() is also required to
-	 * restore the correct voltage setting of the card.
 	 */
 
 	sdio_reset(host);
 	mmc_go_idle(host);
 	mmc_send_if_cond(host, host->ocr_avail);
 
-	ret = mmc_send_io_op_cond(host, 0, &ocr);
+	ret = mmc_send_io_op_cond(host, 0, NULL);
 	if (ret)
 		goto out;
 
-	if (host->ocr_avail_sdio)
-		host->ocr_avail = host->ocr_avail_sdio;
-
-	host->ocr = mmc_select_voltage(host, ocr & ~0x7F);
-	if (!host->ocr) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (mmc_host_uhs(host))
-		/* to query card if 1.8V signalling is supported */
-		host->ocr |= R4_18V_PRESENT;
-
-	ret = mmc_sdio_init_card(host, host->ocr, host->card,
+	ret = mmc_sdio_init_card(host, host->card->ocr, host->card,
 				mmc_card_keep_power(host));
 	if (!ret && host->sdio_irqs)
 		mmc_signal_sdio_irq(host);
@@ -1051,11 +1045,28 @@ out:
 	return ret;
 }
 
+static int mmc_sdio_runtime_suspend(struct mmc_host *host)
+{
+	/* No references to the card, cut the power to it. */
+	mmc_power_off(host);
+	return 0;
+}
+
+static int mmc_sdio_runtime_resume(struct mmc_host *host)
+{
+	/* Restore power and re-initialize. */
+	mmc_power_up(host, host->card->ocr);
+	return mmc_sdio_power_restore(host);
+}
+
 static const struct mmc_bus_ops mmc_sdio_ops = {
 	.remove = mmc_sdio_remove,
 	.detect = mmc_sdio_detect,
+	.pre_suspend = mmc_sdio_pre_suspend,
 	.suspend = mmc_sdio_suspend,
 	.resume = mmc_sdio_resume,
+	.runtime_suspend = mmc_sdio_runtime_suspend,
+	.runtime_resume = mmc_sdio_runtime_resume,
 	.power_restore = mmc_sdio_power_restore,
 	.alive = mmc_sdio_alive,
 };
@@ -1067,7 +1078,7 @@ static const struct mmc_bus_ops mmc_sdio_ops = {
 int mmc_attach_sdio(struct mmc_host *host)
 {
 	int err, i, funcs;
-	u32 ocr;
+	u32 ocr, rocr;
 	struct mmc_card *card;
 
 	BUG_ON(!host);
@@ -1081,23 +1092,13 @@ int mmc_attach_sdio(struct mmc_host *host)
 	if (host->ocr_avail_sdio)
 		host->ocr_avail = host->ocr_avail_sdio;
 
-	/*
-	 * Sanity check the voltages that the card claims to
-	 * support.
-	 */
-	if (ocr & 0x7F) {
-		pr_warning("%s: card claims to support voltages "
-		       "below the defined range. These will be ignored.\n",
-		       mmc_hostname(host));
-		ocr &= ~0x7F;
-	}
 
-	host->ocr = mmc_select_voltage(host, ocr);
+	rocr = mmc_select_voltage(host, ocr);
 
 	/*
 	 * Can we support the voltage(s) of the card(s)?
 	 */
-	if (!host->ocr) {
+	if (!rocr) {
 		err = -EINVAL;
 		goto err;
 	}
@@ -1105,22 +1106,10 @@ int mmc_attach_sdio(struct mmc_host *host)
 	/*
 	 * Detect and init the card.
 	 */
-	if (mmc_host_uhs(host))
-		/* to query card if 1.8V signalling is supported */
-		host->ocr |= R4_18V_PRESENT;
+	err = mmc_sdio_init_card(host, rocr, NULL, 0);
+	if (err)
+		goto err;
 
-	err = mmc_sdio_init_card(host, host->ocr, NULL, 0);
-	if (err) {
-		if (err == -EAGAIN) {
-			/*
-			 * Retry initialization with S18R set to 0.
-			 */
-			host->ocr &= ~R4_18V_PRESENT;
-			err = mmc_sdio_init_card(host, host->ocr, NULL, 0);
-		}
-		if (err)
-			goto err;
-	}
 	card = host->card;
 
 	/*