diff options
Diffstat (limited to 'drivers/mmc/core/mmc.c')
| -rw-r--r-- | drivers/mmc/core/mmc.c | 1452 |
1 files changed, 1239 insertions, 213 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 16006ef153f..793c6f7ddb0 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -12,6 +12,8 @@ #include <linux/err.h> #include <linux/slab.h> +#include <linux/stat.h> +#include <linux/pm_runtime.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> @@ -20,6 +22,7 @@ #include "core.h" #include "bus.h" #include "mmc_ops.h" +#include "sd_ops.h" static const unsigned int tran_exp[] = { 10000, 100000, 1000000, 10000000, @@ -94,13 +97,14 @@ static int mmc_decode_cid(struct mmc_card *card) card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); + card->cid.prv = UNSTUFF_BITS(resp, 48, 8); card->cid.serial = UNSTUFF_BITS(resp, 16, 32); card->cid.month = UNSTUFF_BITS(resp, 12, 4); card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; break; default: - printk(KERN_ERR "%s: card has unknown MMCA version %d\n", + pr_err("%s: card has unknown MMCA version %d\n", mmc_hostname(card->host), card->csd.mmca_vsn); return -EINVAL; } @@ -134,7 +138,7 @@ static int mmc_decode_csd(struct mmc_card *card) */ csd->structure = UNSTUFF_BITS(resp, 126, 2); if (csd->structure == 0) { - printk(KERN_ERR "%s: unrecognised CSD structure version %d\n", + pr_err("%s: unrecognised CSD structure version %d\n", mmc_hostname(card->host), csd->structure); return -EINVAL; } @@ -173,14 +177,17 @@ static int mmc_decode_csd(struct mmc_card *card) } /* - * Read and decode extended CSD. + * Read extended CSD. */ -static int mmc_read_ext_csd(struct mmc_card *card) +static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) { int err; u8 *ext_csd; BUG_ON(!card); + BUG_ON(!new_ext_csd); + + *new_ext_csd = NULL; if (card->csd.mmca_vsn < CSD_SPEC_VER_4) return 0; @@ -191,60 +198,144 @@ static int mmc_read_ext_csd(struct mmc_card *card) */ ext_csd = kmalloc(512, GFP_KERNEL); if (!ext_csd) { - printk(KERN_ERR "%s: could not allocate a buffer to " + pr_err("%s: could not allocate a buffer to " "receive the ext_csd.\n", mmc_hostname(card->host)); return -ENOMEM; } err = mmc_send_ext_csd(card, ext_csd); if (err) { + kfree(ext_csd); + *new_ext_csd = NULL; + /* If the host or the card can't do the switch, * fail more gracefully. */ if ((err != -EINVAL) && (err != -ENOSYS) && (err != -EFAULT)) - goto out; + return err; /* * High capacity cards should have this "magic" size * stored in their CSD. */ if (card->csd.capacity == (4096 * 512)) { - printk(KERN_ERR "%s: unable to read EXT_CSD " + pr_err("%s: unable to read EXT_CSD " "on a possible high capacity card. " "Card will be ignored.\n", mmc_hostname(card->host)); } else { - printk(KERN_WARNING "%s: unable to read " + pr_warning("%s: unable to read " "EXT_CSD, performance might " "suffer.\n", mmc_hostname(card->host)); err = 0; } + } else + *new_ext_csd = ext_csd; - goto out; + return err; +} + +static void mmc_select_card_type(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u8 card_type = card->ext_csd.raw_card_type; + u32 caps = host->caps, caps2 = host->caps2; + unsigned int hs_max_dtr = 0, hs200_max_dtr = 0; + unsigned int avail_type = 0; + + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_26) { + hs_max_dtr = MMC_HIGH_26_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_26; + } + + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_52) { + hs_max_dtr = MMC_HIGH_52_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_52; + } + + if (caps & MMC_CAP_1_8V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V; + } + + if (caps & MMC_CAP_1_2V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V; + } + + if (caps2 & MMC_CAP2_HS200_1_8V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V; } + if (caps2 & MMC_CAP2_HS200_1_2V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V; + } + + if (caps2 & MMC_CAP2_HS400_1_8V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_8V; + } + + if (caps2 & MMC_CAP2_HS400_1_2V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V; + } + + card->ext_csd.hs_max_dtr = hs_max_dtr; + card->ext_csd.hs200_max_dtr = hs200_max_dtr; + card->mmc_avail_type = avail_type; +} + +/* + * Decode extended CSD. + */ +static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) +{ + int err = 0, idx; + unsigned int part_size; + u8 hc_erase_grp_sz = 0, hc_wp_grp_sz = 0; + + BUG_ON(!card); + + if (!ext_csd) + return 0; + /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */ + card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE]; if (card->csd.structure == 3) { - int ext_csd_struct = ext_csd[EXT_CSD_STRUCTURE]; - if (ext_csd_struct > 2) { - printk(KERN_ERR "%s: unrecognised EXT_CSD structure " + if (card->ext_csd.raw_ext_csd_structure > 2) { + pr_err("%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), - ext_csd_struct); + card->ext_csd.raw_ext_csd_structure); err = -EINVAL; goto out; } } card->ext_csd.rev = ext_csd[EXT_CSD_REV]; - if (card->ext_csd.rev > 5) { - printk(KERN_ERR "%s: unrecognised EXT_CSD revision %d\n", + if (card->ext_csd.rev > 7) { + pr_err("%s: unrecognised EXT_CSD revision %d\n", mmc_hostname(card->host), card->ext_csd.rev); err = -EINVAL; goto out; } + card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0]; + card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1]; + card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2]; + card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3]; if (card->ext_csd.rev >= 2) { card->ext_csd.sectors = ext_csd[EXT_CSD_SEC_CNT + 0] << 0 | @@ -257,37 +348,20 @@ static int mmc_read_ext_csd(struct mmc_card *card) mmc_card_set_blockaddr(card); } - switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) { - case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 | - EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_52; - break; - case EXT_CSD_CARD_TYPE_DDR_1_2V | EXT_CSD_CARD_TYPE_52 | - EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_2V; - break; - case EXT_CSD_CARD_TYPE_DDR_1_8V | EXT_CSD_CARD_TYPE_52 | - EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_8V; - break; - case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - break; - case EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 26000000; - break; - default: - /* MMC v4 spec says this cannot happen */ - printk(KERN_WARNING "%s: card is mmc v4 but doesn't " - "support any high-speed modes.\n", - mmc_hostname(card->host)); - } + card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; + mmc_select_card_type(card); + card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.raw_erase_timeout_mult = + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.raw_hc_erase_grp_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; if (card->ext_csd.rev >= 3) { u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG]; + + /* EXT_CSD value is in units of 10ms, but we store in ms */ + card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME]; /* Sleep / awake timeout in 100ns units */ if (sa_shift > 0 && sa_shift <= 0x17) @@ -299,9 +373,110 @@ static int mmc_read_ext_csd(struct mmc_card *card) ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; card->ext_csd.hc_erase_size = ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] << 10; + + card->ext_csd.rel_sectors = ext_csd[EXT_CSD_REL_WR_SEC_C]; + + /* + * There are two boot regions of equal size, defined in + * multiples of 128K. + */ + if (ext_csd[EXT_CSD_BOOT_MULT] && mmc_boot_partition_access(card->host)) { + for (idx = 0; idx < MMC_NUM_BOOT_PARTITION; idx++) { + part_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; + mmc_part_add(card, part_size, + EXT_CSD_PART_CONFIG_ACC_BOOT0 + idx, + "boot%d", idx, true, + MMC_BLK_DATA_AREA_BOOT); + } + } } + card->ext_csd.raw_hc_erase_gap_size = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + card->ext_csd.raw_sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.raw_sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.raw_sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.raw_trim_mult = + ext_csd[EXT_CSD_TRIM_MULT]; + card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT]; if (card->ext_csd.rev >= 4) { + /* + * Enhanced area feature support -- check whether the eMMC + * card has the Enhanced area enabled. If so, export enhanced + * area offset and size to user by adding sysfs interface. + */ + if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && + (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { + hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + card->ext_csd.enhanced_area_en = 1; + /* + * calculate the enhanced data area offset, in bytes + */ + card->ext_csd.enhanced_area_offset = + (ext_csd[139] << 24) + (ext_csd[138] << 16) + + (ext_csd[137] << 8) + ext_csd[136]; + if (mmc_card_blockaddr(card)) + card->ext_csd.enhanced_area_offset <<= 9; + /* + * calculate the enhanced data area size, in kilobytes + */ + card->ext_csd.enhanced_area_size = + (ext_csd[142] << 16) + (ext_csd[141] << 8) + + ext_csd[140]; + card->ext_csd.enhanced_area_size *= + (size_t)(hc_erase_grp_sz * hc_wp_grp_sz); + card->ext_csd.enhanced_area_size <<= 9; + } else { + /* + * If the enhanced area is not enabled, disable these + * device attributes. + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; + } + + /* + * General purpose partition feature support -- + * If ext_csd has the size of general purpose partitions, + * set size, part_cfg, partition name in mmc_part. + */ + if (ext_csd[EXT_CSD_PARTITION_SUPPORT] & + EXT_CSD_PART_SUPPORT_PART_EN) { + if (card->ext_csd.enhanced_area_en != 1) { + hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + card->ext_csd.enhanced_area_en = 1; + } + + for (idx = 0; idx < MMC_NUM_GP_PARTITION; idx++) { + if (!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2]) + continue; + part_size = + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2] + << 16) + + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] + << 8) + + ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3]; + part_size *= (size_t)(hc_erase_grp_sz * + hc_wp_grp_sz); + mmc_part_add(card, part_size << 19, + EXT_CSD_PART_CONFIG_ACC_GP0 + idx, + "gp%d", idx, false, + MMC_BLK_DATA_AREA_GP); + } + } card->ext_csd.sec_trim_mult = ext_csd[EXT_CSD_SEC_TRIM_MULT]; card->ext_csd.sec_erase_mult = @@ -310,16 +485,209 @@ static int mmc_read_ext_csd(struct mmc_card *card) ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; card->ext_csd.trim_timeout = 300 * ext_csd[EXT_CSD_TRIM_MULT]; + + /* + * Note that the call to mmc_part_add above defaults to read + * only. If this default assumption is changed, the call must + * take into account the value of boot_locked below. + */ + card->ext_csd.boot_ro_lock = ext_csd[EXT_CSD_BOOT_WP]; + card->ext_csd.boot_ro_lockable = true; + + /* Save power class values */ + card->ext_csd.raw_pwr_cl_52_195 = + ext_csd[EXT_CSD_PWR_CL_52_195]; + card->ext_csd.raw_pwr_cl_26_195 = + ext_csd[EXT_CSD_PWR_CL_26_195]; + card->ext_csd.raw_pwr_cl_52_360 = + ext_csd[EXT_CSD_PWR_CL_52_360]; + card->ext_csd.raw_pwr_cl_26_360 = + ext_csd[EXT_CSD_PWR_CL_26_360]; + card->ext_csd.raw_pwr_cl_200_195 = + ext_csd[EXT_CSD_PWR_CL_200_195]; + card->ext_csd.raw_pwr_cl_200_360 = + ext_csd[EXT_CSD_PWR_CL_200_360]; + card->ext_csd.raw_pwr_cl_ddr_52_195 = + ext_csd[EXT_CSD_PWR_CL_DDR_52_195]; + card->ext_csd.raw_pwr_cl_ddr_52_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_52_360]; + card->ext_csd.raw_pwr_cl_ddr_200_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_200_360]; } + if (card->ext_csd.rev >= 5) { + /* Adjust production date as per JEDEC JESD84-B451 */ + if (card->cid.year < 2010) + card->cid.year += 16; + + /* check whether the eMMC card supports BKOPS */ + if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { + card->ext_csd.bkops = 1; + card->ext_csd.bkops_en = ext_csd[EXT_CSD_BKOPS_EN]; + card->ext_csd.raw_bkops_status = + ext_csd[EXT_CSD_BKOPS_STATUS]; + if (!card->ext_csd.bkops_en) + pr_info("%s: BKOPS_EN bit is not set\n", + mmc_hostname(card->host)); + } + + /* check whether the eMMC card supports HPI */ + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) { + card->ext_csd.hpi = 1; + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2) + card->ext_csd.hpi_cmd = MMC_STOP_TRANSMISSION; + else + card->ext_csd.hpi_cmd = MMC_SEND_STATUS; + /* + * Indicate the maximum timeout to close + * a command interrupted by HPI + */ + card->ext_csd.out_of_int_time = + ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] * 10; + } + + card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM]; + card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION]; + + /* + * RPMB regions are defined in multiples of 128K. + */ + card->ext_csd.raw_rpmb_size_mult = ext_csd[EXT_CSD_RPMB_MULT]; + if (ext_csd[EXT_CSD_RPMB_MULT] && mmc_host_cmd23(card->host)) { + mmc_part_add(card, ext_csd[EXT_CSD_RPMB_MULT] << 17, + EXT_CSD_PART_CONFIG_ACC_RPMB, + "rpmb", 0, false, + MMC_BLK_DATA_AREA_RPMB); + } + } + + card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT]; if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) card->erased_byte = 0xFF; else card->erased_byte = 0x0; + /* eMMC v4.5 or later */ + if (card->ext_csd.rev >= 6) { + card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; + + card->ext_csd.generic_cmd6_time = 10 * + ext_csd[EXT_CSD_GENERIC_CMD6_TIME]; + card->ext_csd.power_off_longtime = 10 * + ext_csd[EXT_CSD_POWER_OFF_LONG_TIME]; + + card->ext_csd.cache_size = + ext_csd[EXT_CSD_CACHE_SIZE + 0] << 0 | + ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | + ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | + ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + + if (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 1) + card->ext_csd.data_sector_size = 4096; + else + card->ext_csd.data_sector_size = 512; + + if ((ext_csd[EXT_CSD_DATA_TAG_SUPPORT] & 1) && + (ext_csd[EXT_CSD_TAG_UNIT_SIZE] <= 8)) { + card->ext_csd.data_tag_unit_size = + ((unsigned int) 1 << ext_csd[EXT_CSD_TAG_UNIT_SIZE]) * + (card->ext_csd.data_sector_size); + } else { + card->ext_csd.data_tag_unit_size = 0; + } + + card->ext_csd.max_packed_writes = + ext_csd[EXT_CSD_MAX_PACKED_WRITES]; + card->ext_csd.max_packed_reads = + ext_csd[EXT_CSD_MAX_PACKED_READS]; + } else { + card->ext_csd.data_sector_size = 512; + } + out: + return err; +} + +static inline void mmc_free_ext_csd(u8 *ext_csd) +{ kfree(ext_csd); +} + +static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) +{ + u8 *bw_ext_csd; + int err; + + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + err = mmc_get_ext_csd(card, &bw_ext_csd); + + if (err || bw_ext_csd == NULL) { + err = -EINVAL; + goto out; + } + + /* only compare read only fields */ + err = !((card->ext_csd.raw_partition_support == + bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) && + (card->ext_csd.raw_erased_mem_count == + bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) && + (card->ext_csd.rev == + bw_ext_csd[EXT_CSD_REV]) && + (card->ext_csd.raw_ext_csd_structure == + bw_ext_csd[EXT_CSD_STRUCTURE]) && + (card->ext_csd.raw_card_type == + bw_ext_csd[EXT_CSD_CARD_TYPE]) && + (card->ext_csd.raw_s_a_timeout == + bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) && + (card->ext_csd.raw_hc_erase_gap_size == + bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) && + (card->ext_csd.raw_erase_timeout_mult == + bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) && + (card->ext_csd.raw_hc_erase_grp_size == + bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) && + (card->ext_csd.raw_sec_trim_mult == + bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) && + (card->ext_csd.raw_sec_erase_mult == + bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) && + (card->ext_csd.raw_sec_feature_support == + bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) && + (card->ext_csd.raw_trim_mult == + bw_ext_csd[EXT_CSD_TRIM_MULT]) && + (card->ext_csd.raw_sectors[0] == + bw_ext_csd[EXT_CSD_SEC_CNT + 0]) && + (card->ext_csd.raw_sectors[1] == + bw_ext_csd[EXT_CSD_SEC_CNT + 1]) && + (card->ext_csd.raw_sectors[2] == + bw_ext_csd[EXT_CSD_SEC_CNT + 2]) && + (card->ext_csd.raw_sectors[3] == + bw_ext_csd[EXT_CSD_SEC_CNT + 3]) && + (card->ext_csd.raw_pwr_cl_52_195 == + bw_ext_csd[EXT_CSD_PWR_CL_52_195]) && + (card->ext_csd.raw_pwr_cl_26_195 == + bw_ext_csd[EXT_CSD_PWR_CL_26_195]) && + (card->ext_csd.raw_pwr_cl_52_360 == + bw_ext_csd[EXT_CSD_PWR_CL_52_360]) && + (card->ext_csd.raw_pwr_cl_26_360 == + bw_ext_csd[EXT_CSD_PWR_CL_26_360]) && + (card->ext_csd.raw_pwr_cl_200_195 == + bw_ext_csd[EXT_CSD_PWR_CL_200_195]) && + (card->ext_csd.raw_pwr_cl_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_200_360]) && + (card->ext_csd.raw_pwr_cl_ddr_52_195 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_195]) && + (card->ext_csd.raw_pwr_cl_ddr_52_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]) && + (card->ext_csd.raw_pwr_cl_ddr_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_200_360])); + + if (err) + err = -EINVAL; + +out: + mmc_free_ext_csd(bw_ext_csd); return err; } @@ -335,7 +703,13 @@ MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev); MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid); +MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial); +MMC_DEV_ATTR(enhanced_area_offset, "%llu\n", + card->ext_csd.enhanced_area_offset); +MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size); +MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult); +MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors); static struct attribute *mmc_std_attrs[] = { &dev_attr_cid.attr, @@ -348,22 +722,450 @@ static struct attribute *mmc_std_attrs[] = { &dev_attr_manfid.attr, &dev_attr_name.attr, &dev_attr_oemid.attr, + &dev_attr_prv.attr, &dev_attr_serial.attr, + &dev_attr_enhanced_area_offset.attr, + &dev_attr_enhanced_area_size.attr, + &dev_attr_raw_rpmb_size_mult.attr, + &dev_attr_rel_sectors.attr, NULL, }; +ATTRIBUTE_GROUPS(mmc_std); -static struct attribute_group mmc_std_attr_group = { - .attrs = mmc_std_attrs, +static struct device_type mmc_type = { + .groups = mmc_std_groups, }; -static const struct attribute_group *mmc_attr_groups[] = { - &mmc_std_attr_group, - NULL, -}; +/* + * Select the PowerClass for the current bus width + * If power class is defined for 4/8 bit bus in the + * extended CSD register, select it by executing the + * mmc_switch command. + */ +static int __mmc_select_powerclass(struct mmc_card *card, + unsigned int bus_width) +{ + struct mmc_host *host = card->host; + struct mmc_ext_csd *ext_csd = &card->ext_csd; + unsigned int pwrclass_val = 0; + int err = 0; -static struct device_type mmc_type = { - .groups = mmc_attr_groups, -}; + /* Power class selection is supported for versions >= 4.0 */ + if (card->csd.mmca_vsn < CSD_SPEC_VER_4) + return 0; + + /* Power class values are defined only for 4/8 bit bus */ + if (bus_width == EXT_CSD_BUS_WIDTH_1) + return 0; + + switch (1 << host->ios.vdd) { + case MMC_VDD_165_195: + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_195; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) + pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_52_195 : + ext_csd->raw_pwr_cl_ddr_52_195; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_200_195; + break; + case MMC_VDD_27_28: + case MMC_VDD_28_29: + case MMC_VDD_29_30: + case MMC_VDD_30_31: + case MMC_VDD_31_32: + case MMC_VDD_32_33: + case MMC_VDD_33_34: + case MMC_VDD_34_35: + case MMC_VDD_35_36: + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_360; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) + pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_52_360 : + ext_csd->raw_pwr_cl_ddr_52_360; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = (bus_width == EXT_CSD_DDR_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_ddr_200_360 : + ext_csd->raw_pwr_cl_200_360; + break; + default: + pr_warning("%s: Voltage range not supported " + "for power class.\n", mmc_hostname(host)); + return -EINVAL; + } + + if (bus_width & (EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_BUS_WIDTH_8)) + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_8BIT_MASK) >> + EXT_CSD_PWR_CL_8BIT_SHIFT; + else + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_4BIT_MASK) >> + EXT_CSD_PWR_CL_4BIT_SHIFT; + + /* If the power class is different from the default value */ + if (pwrclass_val > 0) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_CLASS, + pwrclass_val, + card->ext_csd.generic_cmd6_time); + } + + return err; +} + +static int mmc_select_powerclass(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err, ddr; + + /* Power class selection is supported for versions >= 4.0 */ + if (card->csd.mmca_vsn < CSD_SPEC_VER_4) + return 0; + + bus_width = host->ios.bus_width; + /* Power class values are defined only for 4/8 bit bus */ + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52; + if (ddr) + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + else + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; + + err = __mmc_select_powerclass(card, ext_csd_bits); + if (err) + pr_warn("%s: power class selection to bus width %d ddr %d failed\n", + mmc_hostname(host), 1 << bus_width, ddr); + + return err; +} + +/* + * Set the bus speed for the selected speed mode. + */ +static void mmc_set_bus_speed(struct mmc_card *card) +{ + unsigned int max_dtr = (unsigned int)-1; + + if ((mmc_card_hs200(card) || mmc_card_hs400(card)) && + max_dtr > card->ext_csd.hs200_max_dtr) + max_dtr = card->ext_csd.hs200_max_dtr; + else if (mmc_card_hs(card) && max_dtr > card->ext_csd.hs_max_dtr) + max_dtr = card->ext_csd.hs_max_dtr; + else if (max_dtr > card->csd.max_dtr) + max_dtr = card->csd.max_dtr; + + mmc_set_clock(card->host, max_dtr); +} + +/* + * Select the bus width amoung 4-bit and 8-bit(SDR). + * If the bus width is changed successfully, return the selected width value. + * Zero is returned instead of error value if the wide width is not supported. + */ +static int mmc_select_bus_width(struct mmc_card *card) +{ + static unsigned ext_csd_bits[] = { + EXT_CSD_BUS_WIDTH_8, + EXT_CSD_BUS_WIDTH_4, + }; + static unsigned bus_widths[] = { + MMC_BUS_WIDTH_8, + MMC_BUS_WIDTH_4, + }; + struct mmc_host *host = card->host; + unsigned idx, bus_width = 0; + int err = 0; + + if ((card->csd.mmca_vsn < CSD_SPEC_VER_4) && + !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) + return 0; + + idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 0 : 1; + + /* + * Unlike SD, MMC cards dont have a configuration register to notify + * supported bus width. So bus test command should be run to identify + * the supported bus width or compare the ext csd values of current + * bus width and ext csd values of 1 bit mode read earlier. + */ + for (; idx < ARRAY_SIZE(bus_widths); idx++) { + /* + * Host is capable of 8bit transfer, then switch + * the device to work in 8bit transfer mode. If the + * mmc switch command returns error then switch to + * 4bit transfer mode. On success set the corresponding + * bus width on the host. + */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits[idx], + card->ext_csd.generic_cmd6_time); + if (err) + continue; + + bus_width = bus_widths[idx]; + mmc_set_bus_width(host, bus_width); + + /* + * If controller can't handle bus width test, + * compare ext_csd previously read in 1 bit mode + * against ext_csd at new bus width + */ + if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) + err = mmc_compare_ext_csds(card, bus_width); + else + err = mmc_bus_test(card, bus_width); + + if (!err) { + err = bus_width; + break; + } else { + pr_warn("%s: switch to bus width %d failed\n", + mmc_hostname(host), ext_csd_bits[idx]); + } + } + + return err; +} + +/* + * Switch to the high-speed mode + */ +static int mmc_select_hs(struct mmc_card *card) +{ + int err; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (!err) + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + + return err; +} + +/* + * Activate wide bus and DDR if supported. + */ +static int mmc_select_hs_ddr(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err = 0; + + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52)) + return 0; + + bus_width = host->ios.bus_width; + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_warn("%s: switch to bus width %d ddr failed\n", + mmc_hostname(host), 1 << bus_width); + return err; + } + + /* + * eMMC cards can support 3.3V to 1.2V i/o (vccq) + * signaling. + * + * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq. + * + * 1.8V vccq at 3.3V core voltage (vcc) is not required + * in the JEDEC spec for DDR. + * + * Do not force change in vccq since we are obviously + * working and no change to vccq is needed. + * + * WARNING: eMMC rules are NOT the same as SD DDR + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + err = __mmc_set_signal_voltage(host, + MMC_SIGNAL_VOLTAGE_120); + if (err) + return err; + } + + mmc_set_timing(host, MMC_TIMING_MMC_DDR52); + + return err; +} + +static int mmc_select_hs400(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = 0; + + /* + * HS400 mode requires 8-bit bus width + */ + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8)) + return 0; + + /* + * Before switching to dual data rate operation for HS400, + * it is required to convert from HS200 mode to HS mode. + */ + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + mmc_set_bus_speed(card); + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (err) { + pr_warn("%s: switch to high-speed from hs200 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + EXT_CSD_DDR_BUS_WIDTH_8, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_warn("%s: switch to bus width for hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS400, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (err) { + pr_warn("%s: switch to hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + mmc_set_timing(host, MMC_TIMING_MMC_HS400); + mmc_set_bus_speed(card); + + return 0; +} + +/* + * For device supporting HS200 mode, the following sequence + * should be done before executing the tuning process. + * 1. set the desired bus width(4-bit or 8-bit, 1-bit is not supported) + * 2. switch to HS200 mode + * 3. set the clock to > 52Mhz and <=200MHz + */ +static int mmc_select_hs200(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = -EINVAL; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + goto err; + + /* + * Set the bus width(4 or 8) with host's support and + * switch to HS200 mode if bus width is set successfully. + */ + err = mmc_select_bus_width(card); + if (!IS_ERR_VALUE(err)) { + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS200, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (!err) + mmc_set_timing(host, MMC_TIMING_MMC_HS200); + } +err: + return err; +} + +/* + * Activate High Speed or HS200 mode if supported. + */ +static int mmc_select_timing(struct mmc_card *card) +{ + int err = 0; + + if ((card->csd.mmca_vsn < CSD_SPEC_VER_4 && + card->ext_csd.hs_max_dtr == 0)) + goto bus_speed; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) + err = mmc_select_hs200(card); + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) + err = mmc_select_hs(card); + + if (err && err != -EBADMSG) + return err; + + if (err) { + pr_warn("%s: switch to %s failed\n", + mmc_card_hs(card) ? "high-speed" : + (mmc_card_hs200(card) ? "hs200" : ""), + mmc_hostname(card->host)); + err = 0; + } + +bus_speed: + /* + * Set the bus speed to the selected bus timing. + * If timing is not selected, backward compatible is the default. + */ + mmc_set_bus_speed(card); + return err; +} + +/* + * Execute tuning sequence to seek the proper bus operating + * conditions for HS200 and HS400, which sends CMD21 to the device. + */ +static int mmc_hs200_tuning(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = 0; + + /* + * Timing should be adjusted to the HS400 target + * operation frequency for tuning process + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8) + if (host->ops->prepare_hs400_tuning) + host->ops->prepare_hs400_tuning(host, &host->ios); + + if (host->ops->execute_tuning) { + mmc_host_clk_hold(host); + err = host->ops->execute_tuning(host, + MMC_SEND_TUNING_BLOCK_HS200); + mmc_host_clk_release(host); + + if (err) + pr_warn("%s: tuning execution failed\n", + mmc_hostname(host)); + } + + return err; +} /* * Handle the detection and initialisation of a card. @@ -375,23 +1177,29 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *oldcard) { struct mmc_card *card; - int err, ddr = 0; + int err; u32 cid[4]; - unsigned int max_dtr; + u32 rocr; + u8 *ext_csd = NULL; BUG_ON(!host); WARN_ON(!host->claimed); + /* Set correct bus mode for MMC before attempting init */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + /* * Since we're changing the OCR value, we seem to * need to tell some cards to go back to the idle * state. We wait 1ms to give cards time to * respond. + * mmc_go_idle is needed for eMMC that are asleep */ mmc_go_idle(host); /* The extra bit indicates that we support high capacity */ - err = mmc_send_op_cond(host, ocr | (1 << 30), NULL); + err = mmc_send_op_cond(host, ocr | (1 << 30), &rocr); if (err) goto err; @@ -431,6 +1239,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, goto err; } + card->ocr = ocr; card->type = MMC_TYPE_MMC; card->rca = 1; memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); @@ -476,128 +1285,274 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, /* * Fetch and process extended CSD. */ - err = mmc_read_ext_csd(card); + + err = mmc_get_ext_csd(card, &ext_csd); if (err) goto free_card; + err = mmc_read_ext_csd(card, ext_csd); + if (err) + goto free_card; + + /* If doing byte addressing, check if required to do sector + * addressing. Handle the case of <2GB cards needing sector + * addressing. See section 8.1 JEDEC Standard JED84-A441; + * ocr register has bit 30 set for sector addressing. + */ + if (!(mmc_card_blockaddr(card)) && (rocr & (1<<30))) + mmc_card_set_blockaddr(card); + /* Erase size depends on CSD and Extended CSD */ mmc_set_erase_size(card); } /* - * Activate high speed (if supported) + * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF + * bit. This bit will be lost every time after a reset or power off. */ - if ((card->ext_csd.hs_max_dtr != 0) && - (host->caps & MMC_CAP_MMC_HIGHSPEED)) { + if (card->ext_csd.enhanced_area_en || + (card->ext_csd.rev >= 3 && (host->caps2 & MMC_CAP2_HC_ERASE_SZ))) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HS_TIMING, 1); + EXT_CSD_ERASE_GROUP_DEF, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) goto free_card; if (err) { - printk(KERN_WARNING "%s: switch to highspeed failed\n", - mmc_hostname(card->host)); err = 0; + /* + * Just disable enhanced area off & sz + * will try to enable ERASE_GROUP_DEF + * during next time reinit + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; } else { - mmc_card_set_highspeed(card); - mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + card->ext_csd.erase_group_def = 1; + /* + * enable ERASE_GRP_DEF successfully. + * This will affect the erase size, so + * here need to reset erase size + */ + mmc_set_erase_size(card); } } /* - * Compute bus speed. + * Ensure eMMC user default partition is enabled + */ + if (card->ext_csd.part_config & EXT_CSD_PART_CONFIG_ACC_MASK) { + card->ext_csd.part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK; + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONFIG, + card->ext_csd.part_config, + card->ext_csd.part_time); + if (err && err != -EBADMSG) + goto free_card; + } + + /* + * Enable power_off_notification byte in the ext_csd register */ - max_dtr = (unsigned int)-1; + if (card->ext_csd.rev >= 6) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + EXT_CSD_POWER_ON, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; - if (mmc_card_highspeed(card)) { - if (max_dtr > card->ext_csd.hs_max_dtr) - max_dtr = card->ext_csd.hs_max_dtr; - } else if (max_dtr > card->csd.max_dtr) { - max_dtr = card->csd.max_dtr; + /* + * The err can be -EBADMSG or 0, + * so check for success and update the flag + */ + if (!err) + card->ext_csd.power_off_notification = EXT_CSD_POWER_ON; + } + + /* + * Select timing interface + */ + err = mmc_select_timing(card); + if (err) + goto free_card; + + if (mmc_card_hs200(card)) { + err = mmc_hs200_tuning(card); + if (err) + goto err; + + err = mmc_select_hs400(card); + if (err) + goto err; + } else if (mmc_card_hs(card)) { + /* Select the desired bus width optionally */ + err = mmc_select_bus_width(card); + if (!IS_ERR_VALUE(err)) { + err = mmc_select_hs_ddr(card); + if (err) + goto err; + } } - mmc_set_clock(host, max_dtr); + /* + * Choose the power class with selected bus interface + */ + mmc_select_powerclass(card); /* - * Indicate DDR mode (if supported). + * Enable HPI feature (if supported) */ - if (mmc_card_highspeed(card)) { - if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) - && (host->caps & (MMC_CAP_1_8V_DDR))) - ddr = MMC_1_8V_DDR_MODE; - else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) - && (host->caps & (MMC_CAP_1_2V_DDR))) - ddr = MMC_1_2V_DDR_MODE; + if (card->ext_csd.hpi) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HPI_MGMT, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + if (err) { + pr_warning("%s: Enabling HPI failed\n", + mmc_hostname(card->host)); + err = 0; + } else + card->ext_csd.hpi_en = 1; } /* - * Activate wide bus and DDR (if supported). + * If cache size is higher than 0, this indicates + * the existence of cache and it can be turned on. */ - if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) && - (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) { - static unsigned ext_csd_bits[][2] = { - { EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 }, - { EXT_CSD_BUS_WIDTH_4, EXT_CSD_DDR_BUS_WIDTH_4 }, - { EXT_CSD_BUS_WIDTH_1, EXT_CSD_BUS_WIDTH_1 }, - }; - static unsigned bus_widths[] = { - MMC_BUS_WIDTH_8, - MMC_BUS_WIDTH_4, - MMC_BUS_WIDTH_1 - }; - unsigned idx, bus_width = 0; - - if (host->caps & MMC_CAP_8_BIT_DATA) - idx = 0; - else - idx = 1; - for (; idx < ARRAY_SIZE(bus_widths); idx++) { - bus_width = bus_widths[idx]; - if (bus_width == MMC_BUS_WIDTH_1) - ddr = 0; /* no DDR for 1-bit width */ - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BUS_WIDTH, - ext_csd_bits[idx][0]); - if (!err) { - mmc_set_bus_width_ddr(card->host, - bus_width, MMC_SDR_MODE); - /* - * If controller can't handle bus width test, - * use the highest bus width to maintain - * compatibility with previous MMC behavior. - */ - if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) - break; - err = mmc_bus_test(card, bus_width); - if (!err) - break; - } - } + if (card->ext_csd.cache_size > 0) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_CACHE_CTRL, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; - if (!err && ddr) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BUS_WIDTH, - ext_csd_bits[idx][1]); - } + /* + * Only if no error, cache is turned on successfully. + */ if (err) { - printk(KERN_WARNING "%s: switch to bus width %d ddr %d " - "failed\n", mmc_hostname(card->host), - 1 << bus_width, ddr); + pr_warning("%s: Cache is supported, " + "but failed to turn on (%d)\n", + mmc_hostname(card->host), err); + card->ext_csd.cache_ctrl = 0; + err = 0; + } else { + card->ext_csd.cache_ctrl = 1; + } + } + + /* + * The mandatory minimum values are defined for packed command. + * read: 5, write: 3 + */ + if (card->ext_csd.max_packed_writes >= 3 && + card->ext_csd.max_packed_reads >= 5 && + host->caps2 & MMC_CAP2_PACKED_CMD) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_EXP_EVENTS_CTRL, + EXT_CSD_PACKED_EVENT_EN, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) goto free_card; - } else if (ddr) { - mmc_card_set_ddr_mode(card); - mmc_set_bus_width_ddr(card->host, bus_width, ddr); + if (err) { + pr_warn("%s: Enabling packed event failed\n", + mmc_hostname(card->host)); + card->ext_csd.packed_event_en = 0; + err = 0; + } else { + card->ext_csd.packed_event_en = 1; } } if (!oldcard) host->card = card; + mmc_free_ext_csd(ext_csd); return 0; free_card: if (!oldcard) mmc_remove_card(card); err: + mmc_free_ext_csd(ext_csd); + + return err; +} + +static int mmc_can_sleep(struct mmc_card *card) +{ + return (card && card->ext_csd.rev >= 3); +} + +static int mmc_sleep(struct mmc_host *host) +{ + struct mmc_command cmd = {0}; + struct mmc_card *card = host->card; + unsigned int timeout_ms = DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000); + int err; + + err = mmc_deselect_cards(host); + if (err) + return err; + + cmd.opcode = MMC_SLEEP_AWAKE; + cmd.arg = card->rca << 16; + cmd.arg |= 1 << 15; + + /* + * If the max_busy_timeout of the host is specified, validate it against + * the sleep cmd timeout. A failure means we need to prevent the host + * from doing hw busy detection, which is done by converting to a R1 + * response instead of a R1B. + */ + if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) { + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = timeout_ms; + } + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + return err; + + /* + * If the host does not wait while the card signals busy, then we will + * will have to wait the sleep/awake timeout. Note, we cannot use the + * SEND_STATUS command to poll the status because that command (and most + * others) is invalid while the card sleeps. + */ + if (!cmd.busy_timeout || !(host->caps & MMC_CAP_WAIT_WHILE_BUSY)) + mmc_delay(timeout_ms); + + return err; +} + +static int mmc_can_poweroff_notify(const struct mmc_card *card) +{ + return card && + mmc_card_mmc(card) && + (card->ext_csd.power_off_notification == EXT_CSD_POWER_ON); +} + +static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type) +{ + unsigned int timeout = card->ext_csd.generic_cmd6_time; + int err; + + /* Use EXT_CSD_POWER_OFF_SHORT as default notification type. */ + if (notify_type == EXT_CSD_POWER_OFF_LONG) + timeout = card->ext_csd.power_off_longtime; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + notify_type, timeout, true, false, false); + if (err) + pr_err("%s: Power Off Notification timed out, %u\n", + mmc_hostname(card->host), timeout); + + /* Disable the power off notification after the switch operation. */ + card->ext_csd.power_off_notification = EXT_CSD_NO_POWER_NOTIFICATION; return err; } @@ -615,6 +1570,14 @@ static void mmc_remove(struct mmc_host *host) } /* + * Card detection - card is alive. + */ +static int mmc_alive(struct mmc_host *host) +{ + return mmc_send_status(host->card, NULL); +} + +/* * Card detection callback from host. */ static void mmc_detect(struct mmc_host *host) @@ -624,150 +1587,224 @@ static void mmc_detect(struct mmc_host *host) BUG_ON(!host); BUG_ON(!host->card); - mmc_claim_host(host); + mmc_get_card(host->card); /* * Just check if our card has been removed. */ - err = mmc_send_status(host->card, NULL); + err = _mmc_detect_card_removed(host); - mmc_release_host(host); + mmc_put_card(host->card); if (err) { mmc_remove(host); mmc_claim_host(host); mmc_detach_bus(host); + mmc_power_off(host); mmc_release_host(host); } } -/* - * Suspend callback from host. - */ -static int mmc_suspend(struct mmc_host *host) +static int _mmc_suspend(struct mmc_host *host, bool is_suspend) { + int err = 0; + unsigned int notify_type = is_suspend ? EXT_CSD_POWER_OFF_SHORT : + EXT_CSD_POWER_OFF_LONG; + BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); - if (!mmc_host_is_spi(host)) - mmc_deselect_cards(host); - host->card->state &= ~MMC_STATE_HIGHSPEED; + + if (mmc_card_suspended(host->card)) + goto out; + + if (mmc_card_doing_bkops(host->card)) { + err = mmc_stop_bkops(host->card); + if (err) + goto out; + } + + err = mmc_flush_cache(host->card); + if (err) + goto out; + + if (mmc_can_poweroff_notify(host->card) && + ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend)) + err = mmc_poweroff_notify(host->card, notify_type); + else if (mmc_can_sleep(host->card)) + err = mmc_sleep(host); + else if (!mmc_host_is_spi(host)) + err = mmc_deselect_cards(host); + + if (!err) { + mmc_power_off(host); + mmc_card_set_suspended(host->card); + } +out: mmc_release_host(host); + return err; +} - return 0; +/* + * Suspend callback + */ +static int mmc_suspend(struct mmc_host *host) +{ + int err; + + err = _mmc_suspend(host, true); + if (!err) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_suspended(&host->card->dev); + } + + return err; } /* - * Resume callback from host. - * * This function tries to determine if the same card is still present * and, if so, restore all state to it. */ -static int mmc_resume(struct mmc_host *host) +static int _mmc_resume(struct mmc_host *host) { - int err; + int err = 0; BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); - err = mmc_init_card(host, host->ocr, host->card); - mmc_release_host(host); + if (!mmc_card_suspended(host->card)) + goto out; + + mmc_power_up(host, host->card->ocr); + err = mmc_init_card(host, host->card->ocr, host->card); + mmc_card_clr_suspended(host->card); + +out: + mmc_release_host(host); return err; } -static int mmc_power_restore(struct mmc_host *host) +/* + * Shutdown callback + */ +static int mmc_shutdown(struct mmc_host *host) { - int ret; + int err = 0; - host->card->state &= ~MMC_STATE_HIGHSPEED; - mmc_claim_host(host); - ret = mmc_init_card(host, host->ocr, host->card); - mmc_release_host(host); + /* + * In a specific case for poweroff notify, we need to resume the card + * before we can shutdown it properly. + */ + if (mmc_can_poweroff_notify(host->card) && + !(host->caps2 & MMC_CAP2_FULL_PWR_CYCLE)) + err = _mmc_resume(host); - return ret; + if (!err) + err = _mmc_suspend(host, false); + + return err; } -static int mmc_sleep(struct mmc_host *host) +/* + * Callback for resume. + */ +static int mmc_resume(struct mmc_host *host) { - struct mmc_card *card = host->card; - int err = -ENOSYS; + int err = 0; - if (card && card->ext_csd.rev >= 3) { - err = mmc_card_sleepawake(host, 1); - if (err < 0) - pr_debug("%s: Error %d while putting card into sleep", - mmc_hostname(host), err); + if (!(host->caps & MMC_CAP_RUNTIME_RESUME)) { + err = _mmc_resume(host); + pm_runtime_set_active(&host->card->dev); + pm_runtime_mark_last_busy(&host->card->dev); } + pm_runtime_enable(&host->card->dev); return err; } -static int mmc_awake(struct mmc_host *host) +/* + * Callback for runtime_suspend. + */ +static int mmc_runtime_suspend(struct mmc_host *host) { - struct mmc_card *card = host->card; - int err = -ENOSYS; + int err; - if (card && card->ext_csd.rev >= 3) { - err = mmc_card_sleepawake(host, 0); - if (err < 0) - pr_debug("%s: Error %d while awaking sleeping card", - mmc_hostname(host), err); - } + if (!(host->caps & MMC_CAP_AGGRESSIVE_PM)) + return 0; + + err = _mmc_suspend(host, true); + if (err) + pr_err("%s: error %d doing aggessive suspend\n", + mmc_hostname(host), err); return err; } -static const struct mmc_bus_ops mmc_ops = { - .awake = mmc_awake, - .sleep = mmc_sleep, - .remove = mmc_remove, - .detect = mmc_detect, - .suspend = NULL, - .resume = NULL, - .power_restore = mmc_power_restore, -}; +/* + * Callback for runtime_resume. + */ +static int mmc_runtime_resume(struct mmc_host *host) +{ + int err; + + if (!(host->caps & (MMC_CAP_AGGRESSIVE_PM | MMC_CAP_RUNTIME_RESUME))) + return 0; + + err = _mmc_resume(host); + if (err) + pr_err("%s: error %d doing aggessive resume\n", + mmc_hostname(host), err); + + return 0; +} + +static int mmc_power_restore(struct mmc_host *host) +{ + int ret; + + mmc_claim_host(host); + ret = mmc_init_card(host, host->card->ocr, host->card); + mmc_release_host(host); -static const struct mmc_bus_ops mmc_ops_unsafe = { - .awake = mmc_awake, - .sleep = mmc_sleep, + return ret; +} + +static const struct mmc_bus_ops mmc_ops = { .remove = mmc_remove, .detect = mmc_detect, .suspend = mmc_suspend, .resume = mmc_resume, + .runtime_suspend = mmc_runtime_suspend, + .runtime_resume = mmc_runtime_resume, .power_restore = mmc_power_restore, + .alive = mmc_alive, + .shutdown = mmc_shutdown, }; -static void mmc_attach_bus_ops(struct mmc_host *host) -{ - const struct mmc_bus_ops *bus_ops; - - if (!mmc_card_is_removable(host)) - bus_ops = &mmc_ops_unsafe; - else - bus_ops = &mmc_ops; - mmc_attach_bus(host, bus_ops); -} - /* * Starting point for MMC card init. */ int mmc_attach_mmc(struct mmc_host *host) { int err; - u32 ocr; + u32 ocr, rocr; BUG_ON(!host); WARN_ON(!host->claimed); + /* Set correct bus mode for MMC before attempting attach */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + err = mmc_send_op_cond(host, 0, &ocr); if (err) return err; - mmc_attach_bus_ops(host); + mmc_attach_bus(host, &mmc_ops); if (host->ocr_avail_mmc) host->ocr_avail = host->ocr_avail_mmc; @@ -780,23 +1817,12 @@ int mmc_attach_mmc(struct mmc_host *host) goto err; } - /* - * Sanity check the voltages that the card claims to - * support. - */ - if (ocr & 0x7F) { - printk(KERN_WARNING "%s: card claims to support voltages " - "below the defined range. These will be ignored.\n", - mmc_hostname(host)); - ocr &= ~0x7F; - } - - host->ocr = mmc_select_voltage(host, ocr); + rocr = mmc_select_voltage(host, ocr); /* * Can we support the voltage of the card? */ - if (!host->ocr) { + if (!rocr) { err = -EINVAL; goto err; } @@ -804,7 +1830,7 @@ int mmc_attach_mmc(struct mmc_host *host) /* * Detect and init the card. */ - err = mmc_init_card(host, host->ocr, NULL); + err = mmc_init_card(host, rocr, NULL); if (err) goto err; @@ -824,7 +1850,7 @@ remove_card: err: mmc_detach_bus(host); - printk(KERN_ERR "%s: error %d whilst initialising MMC card\n", + pr_err("%s: error %d whilst initialising MMC card\n", mmc_hostname(host), err); return err; |