diff options
Diffstat (limited to 'drivers/mmc/core/host.c')
| -rw-r--r-- | drivers/mmc/core/host.c | 193 |
1 files changed, 183 insertions, 10 deletions
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 30055f2b0d4..95cceae9694 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -15,6 +15,8 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/idr.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/pagemap.h> #include <linux/export.h> #include <linux/leds.h> @@ -23,6 +25,7 @@ #include <linux/mmc/host.h> #include <linux/mmc/card.h> +#include <linux/mmc/slot-gpio.h> #include "core.h" #include "host.h" @@ -32,6 +35,7 @@ static void mmc_host_classdev_release(struct device *dev) { struct mmc_host *host = cls_dev_to_mmc_host(dev); + mutex_destroy(&host->slot.lock); kfree(host); } @@ -203,8 +207,8 @@ void mmc_host_clk_release(struct mmc_host *host) host->clk_requests--; if (mmc_host_may_gate_card(host->card) && !host->clk_requests) - queue_delayed_work(system_nrt_wq, &host->clk_gate_work, - msecs_to_jiffies(host->clkgate_delay)); + schedule_delayed_work(&host->clk_gate_work, + msecs_to_jiffies(host->clkgate_delay)); spin_unlock_irqrestore(&host->clk_lock, flags); } @@ -238,10 +242,10 @@ static inline void mmc_host_clk_init(struct mmc_host *host) /* Hold MCI clock for 8 cycles by default */ host->clk_delay = 8; /* - * Default clock gating delay is 200ms. + * Default clock gating delay is 0ms to avoid wasting power. * This value can be tuned by writing into sysfs entry. */ - host->clkgate_delay = 200; + host->clkgate_delay = 0; host->clk_gated = false; INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work); spin_lock_init(&host->clk_lock); @@ -294,6 +298,170 @@ static inline void mmc_host_clk_sysfs_init(struct mmc_host *host) #endif /** + * mmc_of_parse() - parse host's device-tree node + * @host: host whose node should be parsed. + * + * To keep the rest of the MMC subsystem unaware of whether DT has been + * used to to instantiate and configure this host instance or not, we + * parse the properties and set respective generic mmc-host flags and + * parameters. + */ +int mmc_of_parse(struct mmc_host *host) +{ + struct device_node *np; + u32 bus_width; + bool explicit_inv_wp, gpio_inv_wp = false; + enum of_gpio_flags flags; + int len, ret, gpio; + + if (!host->parent || !host->parent->of_node) + return 0; + + np = host->parent->of_node; + + /* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */ + if (of_property_read_u32(np, "bus-width", &bus_width) < 0) { + dev_dbg(host->parent, + "\"bus-width\" property is missing, assuming 1 bit.\n"); + bus_width = 1; + } + + switch (bus_width) { + case 8: + host->caps |= MMC_CAP_8_BIT_DATA; + /* Hosts capable of 8-bit transfers can also do 4 bits */ + case 4: + host->caps |= MMC_CAP_4_BIT_DATA; + break; + case 1: + break; + default: + dev_err(host->parent, + "Invalid \"bus-width\" value %u!\n", bus_width); + return -EINVAL; + } + + /* f_max is obtained from the optional "max-frequency" property */ + of_property_read_u32(np, "max-frequency", &host->f_max); + + /* + * Configure CD and WP pins. They are both by default active low to + * match the SDHCI spec. If GPIOs are provided for CD and / or WP, the + * mmc-gpio helpers are used to attach, configure and use them. If + * polarity inversion is specified in DT, one of MMC_CAP2_CD_ACTIVE_HIGH + * and MMC_CAP2_RO_ACTIVE_HIGH capability-2 flags is set. If the + * "broken-cd" property is provided, the MMC_CAP_NEEDS_POLL capability + * is set. If the "non-removable" property is found, the + * MMC_CAP_NONREMOVABLE capability is set and no card-detection + * configuration is performed. + */ + + /* Parse Card Detection */ + if (of_find_property(np, "non-removable", &len)) { + host->caps |= MMC_CAP_NONREMOVABLE; + } else { + bool explicit_inv_cd, gpio_inv_cd = false; + + explicit_inv_cd = of_property_read_bool(np, "cd-inverted"); + + if (of_find_property(np, "broken-cd", &len)) + host->caps |= MMC_CAP_NEEDS_POLL; + + gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &flags); + if (gpio == -EPROBE_DEFER) + return gpio; + if (gpio_is_valid(gpio)) { + if (!(flags & OF_GPIO_ACTIVE_LOW)) + gpio_inv_cd = true; + + ret = mmc_gpio_request_cd(host, gpio, 0); + if (ret < 0) { + dev_err(host->parent, + "Failed to request CD GPIO #%d: %d!\n", + gpio, ret); + return ret; + } else { + dev_info(host->parent, "Got CD GPIO #%d.\n", + gpio); + } + } + + if (explicit_inv_cd ^ gpio_inv_cd) + host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + } + + /* Parse Write Protection */ + explicit_inv_wp = of_property_read_bool(np, "wp-inverted"); + + gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags); + if (gpio == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto out; + } + if (gpio_is_valid(gpio)) { + if (!(flags & OF_GPIO_ACTIVE_LOW)) + gpio_inv_wp = true; + + ret = mmc_gpio_request_ro(host, gpio); + if (ret < 0) { + dev_err(host->parent, + "Failed to request WP GPIO: %d!\n", ret); + goto out; + } else { + dev_info(host->parent, "Got WP GPIO #%d.\n", + gpio); + } + } + if (explicit_inv_wp ^ gpio_inv_wp) + host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + if (of_find_property(np, "cap-sd-highspeed", &len)) + host->caps |= MMC_CAP_SD_HIGHSPEED; + if (of_find_property(np, "cap-mmc-highspeed", &len)) + host->caps |= MMC_CAP_MMC_HIGHSPEED; + if (of_find_property(np, "sd-uhs-sdr12", &len)) + host->caps |= MMC_CAP_UHS_SDR12; + if (of_find_property(np, "sd-uhs-sdr25", &len)) + host->caps |= MMC_CAP_UHS_SDR25; + if (of_find_property(np, "sd-uhs-sdr50", &len)) + host->caps |= MMC_CAP_UHS_SDR50; + if (of_find_property(np, "sd-uhs-sdr104", &len)) + host->caps |= MMC_CAP_UHS_SDR104; + if (of_find_property(np, "sd-uhs-ddr50", &len)) + host->caps |= MMC_CAP_UHS_DDR50; + if (of_find_property(np, "cap-power-off-card", &len)) + host->caps |= MMC_CAP_POWER_OFF_CARD; + if (of_find_property(np, "cap-sdio-irq", &len)) + host->caps |= MMC_CAP_SDIO_IRQ; + if (of_find_property(np, "full-pwr-cycle", &len)) + host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE; + if (of_find_property(np, "keep-power-in-suspend", &len)) + host->pm_caps |= MMC_PM_KEEP_POWER; + if (of_find_property(np, "enable-sdio-wakeup", &len)) + host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; + if (of_find_property(np, "mmc-ddr-1_8v", &len)) + host->caps |= MMC_CAP_1_8V_DDR; + if (of_find_property(np, "mmc-ddr-1_2v", &len)) + host->caps |= MMC_CAP_1_2V_DDR; + if (of_find_property(np, "mmc-hs200-1_8v", &len)) + host->caps2 |= MMC_CAP2_HS200_1_8V_SDR; + if (of_find_property(np, "mmc-hs200-1_2v", &len)) + host->caps2 |= MMC_CAP2_HS200_1_2V_SDR; + if (of_find_property(np, "mmc-hs400-1_8v", &len)) + host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; + if (of_find_property(np, "mmc-hs400-1_2v", &len)) + host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; + + return 0; + +out: + mmc_gpio_free_cd(host); + return ret; +} + +EXPORT_SYMBOL(mmc_of_parse); + +/** * mmc_alloc_host - initialise the per-host structure. * @extra: sizeof private data structure * @dev: pointer to host device model structure @@ -305,17 +473,20 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) int err; struct mmc_host *host; - if (!idr_pre_get(&mmc_host_idr, GFP_KERNEL)) - return NULL; - host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL); if (!host) return NULL; + /* scanning will be enabled when we're ready */ + host->rescan_disable = 1; + idr_preload(GFP_KERNEL); spin_lock(&mmc_host_lock); - err = idr_get_new(&mmc_host_idr, host, &host->index); + err = idr_alloc(&mmc_host_idr, host, 0, 0, GFP_NOWAIT); + if (err >= 0) + host->index = err; spin_unlock(&mmc_host_lock); - if (err) + idr_preload_end(); + if (err < 0) goto free; dev_set_name(&host->class_dev, "mmc%d", host->index); @@ -327,10 +498,12 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) mmc_host_clk_init(host); + mutex_init(&host->slot.lock); + host->slot.cd_irq = -EINVAL; + spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); INIT_DELAYED_WORK(&host->detect, mmc_rescan); - INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable); #ifdef CONFIG_PM host->pm_notify.notifier_call = mmc_pm_notify; #endif |