diff options
Diffstat (limited to 'drivers/mmc/core/core.c')
| -rw-r--r-- | drivers/mmc/core/core.c | 1327 |
1 files changed, 726 insertions, 601 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 690255c7d4d..7dc0c85fdb6 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -23,14 +23,18 @@ #include <linux/log2.h> #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> +#include <linux/pm_wakeup.h> #include <linux/suspend.h> #include <linux/fault-inject.h> #include <linux/random.h> +#include <linux/slab.h> +#include <linux/of.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include <linux/mmc/sd.h> +#include <linux/mmc/slot-gpio.h> #include "core.h" #include "bus.h" @@ -41,7 +45,17 @@ #include "sd_ops.h" #include "sdio_ops.h" +/* If the device is not responding */ +#define MMC_CORE_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ + +/* + * Background operations can take a long time, depending on the housekeeping + * operations the card has to perform. + */ +#define MMC_BKOPS_MAX_TIMEOUT (4 * 60 * 1000) /* max time to wait in ms */ + static struct workqueue_struct *workqueue; +static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; /* * Enabling software CRCs on the data blocks can be a significant (30%) @@ -52,23 +66,6 @@ bool use_spi_crc = 1; module_param(use_spi_crc, bool, 0); /* - * We normally treat cards as removed during suspend if they are not - * known to be on a non-removable bus, to avoid the risk of writing - * back data to a different card after resume. Allow this to be - * overridden if necessary. - */ -#ifdef CONFIG_MMC_UNSAFE_RESUME -bool mmc_assume_removable; -#else -bool mmc_assume_removable = 1; -#endif -EXPORT_SYMBOL(mmc_assume_removable); -module_param_named(removable, mmc_assume_removable, bool, 0644); -MODULE_PARM_DESC( - removable, - "MMC/SD cards are removable and may be removed during suspend"); - -/* * Internal function. Schedule delayed work in the MMC work queue. */ static int mmc_schedule_delayed_work(struct delayed_work *work, @@ -109,8 +106,8 @@ static void mmc_should_fail_request(struct mmc_host *host, !should_fail(&host->fail_mmc_request, data->blksz * data->blocks)) return; - data->error = data_errors[random32() % ARRAY_SIZE(data_errors)]; - data->bytes_xfered = (random32() % (data->bytes_xfered >> 9)) << 9; + data->error = data_errors[prandom_u32() % ARRAY_SIZE(data_errors)]; + data->bytes_xfered = (prandom_u32() % (data->bytes_xfered >> 9)) << 9; } #else /* CONFIG_FAIL_MMC_REQUEST */ @@ -188,6 +185,12 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) struct scatterlist *sg; #endif + if (mrq->sbc) { + pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n", + mmc_hostname(host), mrq->sbc->opcode, + mrq->sbc->arg, mrq->sbc->flags); + } + pr_debug("%s: starting CMD%u arg %08x flags %08x\n", mmc_hostname(host), mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags); @@ -238,21 +241,178 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) host->ops->request(host, mrq); } +/** + * mmc_start_bkops - start BKOPS for supported cards + * @card: MMC card to start BKOPS + * @form_exception: A flag to indicate if this function was + * called due to an exception raised by the card + * + * Start background operations whenever requested. + * When the urgent BKOPS bit is set in a R1 command response + * then background operations should be started immediately. +*/ +void mmc_start_bkops(struct mmc_card *card, bool from_exception) +{ + int err; + int timeout; + bool use_busy_signal; + + BUG_ON(!card); + + if (!card->ext_csd.bkops_en || mmc_card_doing_bkops(card)) + return; + + err = mmc_read_bkops_status(card); + if (err) { + pr_err("%s: Failed to read bkops status: %d\n", + mmc_hostname(card->host), err); + return; + } + + if (!card->ext_csd.raw_bkops_status) + return; + + if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 && + from_exception) + return; + + mmc_claim_host(card->host); + if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) { + timeout = MMC_BKOPS_MAX_TIMEOUT; + use_busy_signal = true; + } else { + timeout = 0; + use_busy_signal = false; + } + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BKOPS_START, 1, timeout, + use_busy_signal, true, false); + if (err) { + pr_warn("%s: Error %d starting bkops\n", + mmc_hostname(card->host), err); + goto out; + } + + /* + * For urgent bkops status (LEVEL_2 and more) + * bkops executed synchronously, otherwise + * the operation is in progress + */ + if (!use_busy_signal) + mmc_card_set_doing_bkops(card); +out: + mmc_release_host(card->host); +} +EXPORT_SYMBOL(mmc_start_bkops); + +/* + * mmc_wait_data_done() - done callback for data request + * @mrq: done data request + * + * Wakes up mmc context, passed as a callback to host controller driver + */ +static void mmc_wait_data_done(struct mmc_request *mrq) +{ + mrq->host->context_info.is_done_rcv = true; + wake_up_interruptible(&mrq->host->context_info.wait); +} + static void mmc_wait_done(struct mmc_request *mrq) { complete(&mrq->completion); } -static void __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) +/* + *__mmc_start_data_req() - starts data request + * @host: MMC host to start the request + * @mrq: data request to start + * + * Sets the done callback to be called when request is completed by the card. + * Starts data mmc request execution + */ +static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq) +{ + mrq->done = mmc_wait_data_done; + mrq->host = host; + if (mmc_card_removed(host->card)) { + mrq->cmd->error = -ENOMEDIUM; + mmc_wait_data_done(mrq); + return -ENOMEDIUM; + } + mmc_start_request(host, mrq); + + return 0; +} + +static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) { init_completion(&mrq->completion); mrq->done = mmc_wait_done; if (mmc_card_removed(host->card)) { mrq->cmd->error = -ENOMEDIUM; complete(&mrq->completion); - return; + return -ENOMEDIUM; } mmc_start_request(host, mrq); + return 0; +} + +/* + * mmc_wait_for_data_req_done() - wait for request completed + * @host: MMC host to prepare the command. + * @mrq: MMC request to wait for + * + * Blocks MMC context till host controller will ack end of data request + * execution or new request notification arrives from the block layer. + * Handles command retries. + * + * Returns enum mmc_blk_status after checking errors. + */ +static int mmc_wait_for_data_req_done(struct mmc_host *host, + struct mmc_request *mrq, + struct mmc_async_req *next_req) +{ + struct mmc_command *cmd; + struct mmc_context_info *context_info = &host->context_info; + int err; + unsigned long flags; + + while (1) { + wait_event_interruptible(context_info->wait, + (context_info->is_done_rcv || + context_info->is_new_req)); + spin_lock_irqsave(&context_info->lock, flags); + context_info->is_waiting_last_req = false; + spin_unlock_irqrestore(&context_info->lock, flags); + if (context_info->is_done_rcv) { + context_info->is_done_rcv = false; + context_info->is_new_req = false; + cmd = mrq->cmd; + + if (!cmd->error || !cmd->retries || + mmc_card_removed(host->card)) { + err = host->areq->err_check(host->card, + host->areq); + break; /* return err */ + } else { + pr_info("%s: req failed (CMD%u): %d, retrying...\n", + mmc_hostname(host), + cmd->opcode, cmd->error); + cmd->retries--; + cmd->error = 0; + host->ops->request(host, mrq); + continue; /* wait for done/new event again */ + } + } else if (context_info->is_new_req) { + context_info->is_new_req = false; + if (!next_req) { + err = MMC_BLK_NEW_REQUEST; + break; /* return err */ + } + } + } + return err; } static void mmc_wait_for_req_done(struct mmc_host *host, @@ -264,6 +424,24 @@ static void mmc_wait_for_req_done(struct mmc_host *host, wait_for_completion(&mrq->completion); cmd = mrq->cmd; + + /* + * If host has timed out waiting for the sanitize + * to complete, card might be still in programming state + * so let's try to bring the card out of programming + * state. + */ + if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) { + if (!mmc_interrupt_hpi(host->card)) { + pr_warning("%s: %s: Interrupted sanitize\n", + mmc_hostname(host), __func__); + cmd->error = 0; + break; + } else { + pr_err("%s: %s: Failed to interrupt sanitize\n", + mmc_hostname(host), __func__); + } + } if (!cmd->error || !cmd->retries || mmc_card_removed(host->card)) break; @@ -336,6 +514,7 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host, struct mmc_async_req *areq, int *error) { int err = 0; + int start_err = 0; struct mmc_async_req *data = host->areq; /* Prepare a new request */ @@ -343,32 +522,41 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host, mmc_pre_req(host, areq->mrq, !host->areq); if (host->areq) { - mmc_wait_for_req_done(host, host->areq->mrq); - err = host->areq->err_check(host->card, host->areq); - if (err) { - /* post process the completed failed request */ - mmc_post_req(host, host->areq->mrq, 0); - if (areq) - /* - * Cancel the new prepared request, because - * it can't run until the failed - * request has been properly handled. - */ - mmc_post_req(host, areq->mrq, -EINVAL); - - host->areq = NULL; - goto out; + err = mmc_wait_for_data_req_done(host, host->areq->mrq, areq); + if (err == MMC_BLK_NEW_REQUEST) { + if (error) + *error = err; + /* + * The previous request was not completed, + * nothing to return + */ + return NULL; } + /* + * Check BKOPS urgency for each R1 response + */ + if (host->card && mmc_card_mmc(host->card) && + ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) || + (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) && + (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) + mmc_start_bkops(host->card, true); } - if (areq) - __mmc_start_req(host, areq->mrq); + if (!err && areq) + start_err = __mmc_start_data_req(host, areq->mrq); if (host->areq) mmc_post_req(host, host->areq->mrq, 0); - host->areq = areq; - out: + /* Cancel a prepared request if it was not started. */ + if ((err || start_err) && areq) + mmc_post_req(host, areq->mrq, -EINVAL); + + if (err) + host->areq = NULL; + else + host->areq = areq; + if (error) *error = err; return data; @@ -396,12 +584,13 @@ EXPORT_SYMBOL(mmc_wait_for_req); * @card: the MMC card associated with the HPI transfer * * Issued High Priority Interrupt, and check for card status - * util out-of prg-state. + * until out-of prg-state. */ int mmc_interrupt_hpi(struct mmc_card *card) { int err; u32 status; + unsigned long prg_wait; BUG_ON(!card); @@ -417,30 +606,39 @@ int mmc_interrupt_hpi(struct mmc_card *card) goto out; } - /* - * If the card status is in PRG-state, we can send the HPI command. - */ - if (R1_CURRENT_STATE(status) == R1_STATE_PRG) { - do { - /* - * We don't know when the HPI command will finish - * processing, so we need to resend HPI until out - * of prg-state, and keep checking the card status - * with SEND_STATUS. If a timeout error occurs when - * sending the HPI command, we are already out of - * prg-state. - */ - err = mmc_send_hpi_cmd(card, &status); - if (err) - pr_debug("%s: abort HPI (%d error)\n", - mmc_hostname(card->host), err); + switch (R1_CURRENT_STATE(status)) { + case R1_STATE_IDLE: + case R1_STATE_READY: + case R1_STATE_STBY: + case R1_STATE_TRAN: + /* + * In idle and transfer states, HPI is not needed and the caller + * can issue the next intended command immediately + */ + goto out; + case R1_STATE_PRG: + break; + default: + /* In all other states, it's illegal to issue HPI */ + pr_debug("%s: HPI cannot be sent. Card state=%d\n", + mmc_hostname(card->host), R1_CURRENT_STATE(status)); + err = -EINVAL; + goto out; + } - err = mmc_send_status(card, &status); - if (err) - break; - } while (R1_CURRENT_STATE(status) == R1_STATE_PRG); - } else - pr_debug("%s: Left prg-state\n", mmc_hostname(card->host)); + err = mmc_send_hpi_cmd(card, &status); + if (err) + goto out; + + prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time); + do { + err = mmc_send_status(card, &status); + + if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN) + break; + if (time_after(jiffies, prg_wait)) + err = -ETIMEDOUT; + } while (!err); out: mmc_release_host(card->host); @@ -478,6 +676,64 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries EXPORT_SYMBOL(mmc_wait_for_cmd); /** + * mmc_stop_bkops - stop ongoing BKOPS + * @card: MMC card to check BKOPS + * + * Send HPI command to stop ongoing background operations to + * allow rapid servicing of foreground operations, e.g. read/ + * writes. Wait until the card comes out of the programming state + * to avoid errors in servicing read/write requests. + */ +int mmc_stop_bkops(struct mmc_card *card) +{ + int err = 0; + + BUG_ON(!card); + err = mmc_interrupt_hpi(card); + + /* + * If err is EINVAL, we can't issue an HPI. + * It should complete the BKOPS. + */ + if (!err || (err == -EINVAL)) { + mmc_card_clr_doing_bkops(card); + err = 0; + } + + return err; +} +EXPORT_SYMBOL(mmc_stop_bkops); + +int mmc_read_bkops_status(struct mmc_card *card) +{ + int err; + u8 *ext_csd; + + /* + * In future work, we should consider storing the entire ext_csd. + */ + ext_csd = kmalloc(512, GFP_KERNEL); + if (!ext_csd) { + pr_err("%s: could not allocate buffer to receive the ext_csd.\n", + mmc_hostname(card->host)); + return -ENOMEM; + } + + mmc_claim_host(card->host); + err = mmc_send_ext_csd(card, ext_csd); + mmc_release_host(card->host); + if (err) + goto out; + + card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS]; + card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS]; +out: + kfree(ext_csd); + return err; +} +EXPORT_SYMBOL(mmc_read_bkops_status); + +/** * mmc_set_data_timeout - set the timeout for a data command * @data: data phase for command * @card: the MMC card associated with the data transfer @@ -526,10 +782,14 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) if (data->flags & MMC_DATA_WRITE) /* - * The limit is really 250 ms, but that is - * insufficient for some crappy cards. + * The MMC spec "It is strongly recommended + * for hosts to implement more than 500ms + * timeout value even if the card indicates + * the 250ms maximum busy length." Even the + * previous value of 300ms is known to be + * insufficient for some cards. */ - limit_us = 300000; + limit_us = 3000000; else limit_us = 100000; @@ -540,6 +800,10 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) data->timeout_ns = limit_us * 1000; data->timeout_clks = 0; } + + /* assign limit value if invalid */ + if (timeout_us == 0) + data->timeout_ns = limit_us * 1000; } /* @@ -599,105 +863,6 @@ unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz) EXPORT_SYMBOL(mmc_align_data_size); /** - * mmc_host_enable - enable a host. - * @host: mmc host to enable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_enable(struct mmc_host *host) -{ - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (host->nesting_cnt++) - return 0; - - cancel_delayed_work_sync(&host->disable); - - if (host->enabled) - return 0; - - if (host->ops->enable) { - int err; - - host->en_dis_recurs = 1; - mmc_host_clk_hold(host); - err = host->ops->enable(host); - mmc_host_clk_release(host); - host->en_dis_recurs = 0; - - if (err) { - pr_debug("%s: enable error %d\n", - mmc_hostname(host), err); - return err; - } - } - host->enabled = 1; - return 0; -} -EXPORT_SYMBOL(mmc_host_enable); - -static int mmc_host_do_disable(struct mmc_host *host, int lazy) -{ - if (host->ops->disable) { - int err; - - host->en_dis_recurs = 1; - mmc_host_clk_hold(host); - err = host->ops->disable(host, lazy); - mmc_host_clk_release(host); - host->en_dis_recurs = 0; - - if (err < 0) { - pr_debug("%s: disable error %d\n", - mmc_hostname(host), err); - return err; - } - if (err > 0) { - unsigned long delay = msecs_to_jiffies(err); - - mmc_schedule_delayed_work(&host->disable, delay); - } - } - host->enabled = 0; - return 0; -} - -/** - * mmc_host_disable - disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_disable(struct mmc_host *host) -{ - int err; - - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - err = mmc_host_do_disable(host, 0); - return err; -} -EXPORT_SYMBOL(mmc_host_disable); - -/** * __mmc_claim_host - exclusively claim a host * @host: mmc host to claim * @abort: whether or not the operation should be aborted @@ -735,46 +900,28 @@ int __mmc_claim_host(struct mmc_host *host, atomic_t *abort) wake_up(&host->wq); spin_unlock_irqrestore(&host->lock, flags); remove_wait_queue(&host->wq, &wait); - if (!stop) - mmc_host_enable(host); + if (host->ops->enable && !stop && host->claim_cnt == 1) + host->ops->enable(host); return stop; } EXPORT_SYMBOL(__mmc_claim_host); /** - * mmc_try_claim_host - try exclusively to claim a host - * @host: mmc host to claim + * mmc_release_host - release a host + * @host: mmc host to release * - * Returns %1 if the host is claimed, %0 otherwise. + * Release a MMC host, allowing others to claim the host + * for their operations. */ -int mmc_try_claim_host(struct mmc_host *host) +void mmc_release_host(struct mmc_host *host) { - int claimed_host = 0; unsigned long flags; - spin_lock_irqsave(&host->lock, flags); - if (!host->claimed || host->claimer == current) { - host->claimed = 1; - host->claimer = current; - host->claim_cnt += 1; - claimed_host = 1; - } - spin_unlock_irqrestore(&host->lock, flags); - return claimed_host; -} -EXPORT_SYMBOL(mmc_try_claim_host); + WARN_ON(!host->claimed); -/** - * mmc_do_release_host - release a claimed host - * @host: mmc host to release - * - * If you successfully claimed a host, this function will - * release it again. - */ -void mmc_do_release_host(struct mmc_host *host) -{ - unsigned long flags; + if (host->ops->disable && host->claim_cnt == 1) + host->ops->disable(host); spin_lock_irqsave(&host->lock, flags); if (--host->claim_cnt) { @@ -787,68 +934,30 @@ void mmc_do_release_host(struct mmc_host *host) wake_up(&host->wq); } } -EXPORT_SYMBOL(mmc_do_release_host); - -void mmc_host_deeper_disable(struct work_struct *work) -{ - struct mmc_host *host = - container_of(work, struct mmc_host, disable.work); - - /* If the host is claimed then we do not want to disable it anymore */ - if (!mmc_try_claim_host(host)) - return; - mmc_host_do_disable(host, 1); - mmc_do_release_host(host); -} +EXPORT_SYMBOL(mmc_release_host); -/** - * mmc_host_lazy_disable - lazily disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. +/* + * This is a helper function, which fetches a runtime pm reference for the + * card device and also claims the host. */ -int mmc_host_lazy_disable(struct mmc_host *host) +void mmc_get_card(struct mmc_card *card) { - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - if (host->disable_delay) { - mmc_schedule_delayed_work(&host->disable, - msecs_to_jiffies(host->disable_delay)); - return 0; - } else - return mmc_host_do_disable(host, 1); + pm_runtime_get_sync(&card->dev); + mmc_claim_host(card->host); } -EXPORT_SYMBOL(mmc_host_lazy_disable); +EXPORT_SYMBOL(mmc_get_card); -/** - * mmc_release_host - release a host - * @host: mmc host to release - * - * Release a MMC host, allowing others to claim the host - * for their operations. +/* + * This is a helper function, which releases the host and drops the runtime + * pm reference for the card device. */ -void mmc_release_host(struct mmc_host *host) +void mmc_put_card(struct mmc_card *card) { - WARN_ON(!host->claimed); - - mmc_host_lazy_disable(host); - - mmc_do_release_host(host); + mmc_release_host(card->host); + pm_runtime_mark_last_busy(&card->dev); + pm_runtime_put_autosuspend(&card->dev); } - -EXPORT_SYMBOL(mmc_release_host); +EXPORT_SYMBOL(mmc_put_card); /* * Internal function that does the actual ios call to the host driver, @@ -1053,6 +1162,49 @@ u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max) } EXPORT_SYMBOL(mmc_vddrange_to_ocrmask); +#ifdef CONFIG_OF + +/** + * mmc_of_parse_voltage - return mask of supported voltages + * @np: The device node need to be parsed. + * @mask: mask of voltages available for MMC/SD/SDIO + * + * 1. Return zero on success. + * 2. Return negative errno: voltage-range is invalid. + */ +int mmc_of_parse_voltage(struct device_node *np, u32 *mask) +{ + const u32 *voltage_ranges; + int num_ranges, i; + + voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); + num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; + if (!voltage_ranges || !num_ranges) { + pr_info("%s: voltage-ranges unspecified\n", np->full_name); + return -EINVAL; + } + + for (i = 0; i < num_ranges; i++) { + const int j = i * 2; + u32 ocr_mask; + + ocr_mask = mmc_vddrange_to_ocrmask( + be32_to_cpu(voltage_ranges[j]), + be32_to_cpu(voltage_ranges[j + 1])); + if (!ocr_mask) { + pr_err("%s: voltage-range #%d is invalid\n", + np->full_name, i); + return -EINVAL; + } + *mask |= ocr_mask; + } + + return 0; +} +EXPORT_SYMBOL(mmc_of_parse_voltage); + +#endif /* CONFIG_OF */ + #ifdef CONFIG_REGULATOR /** @@ -1088,7 +1240,7 @@ int mmc_regulator_get_ocrmask(struct regulator *supply) return result; } -EXPORT_SYMBOL(mmc_regulator_get_ocrmask); +EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask); /** * mmc_regulator_set_ocr - set regulator to match host->ios voltage @@ -1113,7 +1265,8 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, int tmp; int voltage; - /* REVISIT mmc_vddrange_to_ocrmask() may have set some + /* + * REVISIT mmc_vddrange_to_ocrmask() may have set some * bits this regulator doesn't quite support ... don't * be too picky, most cards and regulators are OK with * a 0.1V range goof (it's a small error percentage). @@ -1127,12 +1280,13 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, max_uV = min_uV + 100 * 1000; } - /* avoid needless changes to this voltage; the regulator - * might not allow this operation + /* + * If we're using a fixed/static regulator, don't call + * regulator_set_voltage; it would fail. */ voltage = regulator_get_voltage(supply); - if (mmc->caps2 & MMC_CAP2_BROKEN_VOLTAGE) + if (!regulator_can_change_voltage(supply)) min_uV = max_uV = voltage; if (voltage < 0) @@ -1158,10 +1312,40 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, "could not set regulator OCR (%d)\n", result); return result; } -EXPORT_SYMBOL(mmc_regulator_set_ocr); +EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr); #endif /* CONFIG_REGULATOR */ +int mmc_regulator_get_supply(struct mmc_host *mmc) +{ + struct device *dev = mmc_dev(mmc); + int ret; + + mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc"); + mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc"); + + if (IS_ERR(mmc->supply.vmmc)) { + if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No vmmc regulator found\n"); + } else { + ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc); + if (ret > 0) + mmc->ocr_avail = ret; + else + dev_warn(dev, "Failed getting OCR mask: %d\n", ret); + } + + if (IS_ERR(mmc->supply.vqmmc)) { + if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No vqmmc regulator found\n"); + } + + return 0; +} +EXPORT_SYMBOL_GPL(mmc_regulator_get_supply); + /* * Mask off any voltages we don't support and select * the lowest voltage @@ -1170,31 +1354,60 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) { int bit; - ocr &= host->ocr_avail; + /* + * Sanity check the voltages that the card claims to + * support. + */ + if (ocr & 0x7F) { + dev_warn(mmc_dev(host), + "card claims to support voltages below defined range\n"); + ocr &= ~0x7F; + } - bit = ffs(ocr); - if (bit) { - bit -= 1; + ocr &= host->ocr_avail; + if (!ocr) { + dev_warn(mmc_dev(host), "no support for card's volts\n"); + return 0; + } + if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) { + bit = ffs(ocr) - 1; ocr &= 3 << bit; + mmc_power_cycle(host, ocr); + } else { + bit = fls(ocr) - 1; + ocr &= 3 << bit; + if (bit != host->ios.vdd) + dev_warn(mmc_dev(host), "exceeding card's volts\n"); + } + + return ocr; +} + +int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) +{ + int err = 0; + int old_signal_voltage = host->ios.signal_voltage; + host->ios.signal_voltage = signal_voltage; + if (host->ops->start_signal_voltage_switch) { mmc_host_clk_hold(host); - host->ios.vdd = bit; - mmc_set_ios(host); + err = host->ops->start_signal_voltage_switch(host, &host->ios); mmc_host_clk_release(host); - } else { - pr_warning("%s: host doesn't support card's voltages\n", - mmc_hostname(host)); - ocr = 0; } - return ocr; + if (err) + host->ios.signal_voltage = old_signal_voltage; + + return err; + } -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11) +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) { struct mmc_command cmd = {0}; int err = 0; + u32 clock; BUG_ON(!host); @@ -1202,27 +1415,81 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11 * Send CMD11 only if the request is to switch the card to * 1.8V signalling. */ - if ((signal_voltage != MMC_SIGNAL_VOLTAGE_330) && cmd11) { - cmd.opcode = SD_SWITCH_VOLTAGE; - cmd.arg = 0; - cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + if (signal_voltage == MMC_SIGNAL_VOLTAGE_330) + return __mmc_set_signal_voltage(host, signal_voltage); - err = mmc_wait_for_cmd(host, &cmd, 0); - if (err) - return err; + /* + * If we cannot switch voltages, return failure so the caller + * can continue without UHS mode + */ + if (!host->ops->start_signal_voltage_switch) + return -EPERM; + if (!host->ops->card_busy) + pr_warning("%s: cannot verify signal voltage switch\n", + mmc_hostname(host)); + + cmd.opcode = SD_SWITCH_VOLTAGE; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; - if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) - return -EIO; + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + return err; + + if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) + return -EIO; + + mmc_host_clk_hold(host); + /* + * The card should drive cmd and dat[0:3] low immediately + * after the response of cmd11, but wait 1 ms to be sure + */ + mmc_delay(1); + if (host->ops->card_busy && !host->ops->card_busy(host)) { + err = -EAGAIN; + goto power_cycle; } + /* + * During a signal voltage level switch, the clock must be gated + * for 5 ms according to the SD spec + */ + clock = host->ios.clock; + host->ios.clock = 0; + mmc_set_ios(host); - host->ios.signal_voltage = signal_voltage; + if (__mmc_set_signal_voltage(host, signal_voltage)) { + /* + * Voltages may not have been switched, but we've already + * sent CMD11, so a power cycle is required anyway + */ + err = -EAGAIN; + goto power_cycle; + } - if (host->ops->start_signal_voltage_switch) { - mmc_host_clk_hold(host); - err = host->ops->start_signal_voltage_switch(host, &host->ios); - mmc_host_clk_release(host); + /* Keep clock gated for at least 5 ms */ + mmc_delay(5); + host->ios.clock = clock; + mmc_set_ios(host); + + /* Wait for at least 1 ms according to spec */ + mmc_delay(1); + + /* + * Failure to switch is indicated by the card holding + * dat[0:3] low + */ + if (host->ops->card_busy && host->ops->card_busy(host)) + err = -EAGAIN; + +power_cycle: + if (err) { + pr_debug("%s: Signal voltage switch failed, " + "power cycling card\n", mmc_hostname(host)); + mmc_power_cycle(host, ocr); } + mmc_host_clk_release(host); + return err; } @@ -1248,48 +1515,6 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) mmc_host_clk_release(host); } -static void mmc_poweroff_notify(struct mmc_host *host) -{ - struct mmc_card *card; - unsigned int timeout; - unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION; - int err = 0; - - card = host->card; - mmc_claim_host(host); - - /* - * Send power notify command only if card - * is mmc and notify state is powered ON - */ - if (card && mmc_card_mmc(card) && - (card->poweroff_notify_state == MMC_POWERED_ON)) { - - if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { - notify_type = EXT_CSD_POWER_OFF_SHORT; - timeout = card->ext_csd.generic_cmd6_time; - card->poweroff_notify_state = MMC_POWEROFF_SHORT; - } else { - notify_type = EXT_CSD_POWER_OFF_LONG; - timeout = card->ext_csd.power_off_longtime; - card->poweroff_notify_state = MMC_POWEROFF_LONG; - } - - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_POWER_OFF_NOTIFICATION, - notify_type, timeout); - - if (err && err != -EBADMSG) - pr_err("Device failed to respond within %d poweroff " - "time. Forcefully powering down the device\n", - timeout); - - /* Set the card state to no notification after the poweroff */ - card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; - } - mmc_release_host(host); -} - /* * Apply power to the MMC stack. This is a two-stage process. * First, we enable power to the card without the clock running. @@ -1301,19 +1526,14 @@ static void mmc_poweroff_notify(struct mmc_host *host) * If a host does all the power sequencing itself, ignore the * initial MMC_POWER_UP stage. */ -static void mmc_power_up(struct mmc_host *host) +void mmc_power_up(struct mmc_host *host, u32 ocr) { - int bit; + if (host->ios.power_mode == MMC_POWER_ON) + return; mmc_host_clk_hold(host); - /* If ocr is set, we use it */ - if (host->ocr) - bit = ffs(host->ocr) - 1; - else - bit = fls(host->ocr_avail) - 1; - - host->ios.vdd = bit; + host->ios.vdd = fls(ocr) - 1; if (mmc_host_is_spi(host)) host->ios.chip_select = MMC_CS_HIGH; else @@ -1324,6 +1544,14 @@ static void mmc_power_up(struct mmc_host *host) host->ios.timing = MMC_TIMING_LEGACY; mmc_set_ios(host); + /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */ + if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n"); + else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n"); + else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n"); + /* * This delay should be sufficient to allow the power supply * to reach the minimum voltage. @@ -1346,35 +1574,14 @@ static void mmc_power_up(struct mmc_host *host) void mmc_power_off(struct mmc_host *host) { - int err = 0; + if (host->ios.power_mode == MMC_POWER_OFF) + return; + mmc_host_clk_hold(host); host->ios.clock = 0; host->ios.vdd = 0; - /* - * For eMMC 4.5 device send AWAKE command before - * POWER_OFF_NOTIFY command, because in sleep state - * eMMC 4.5 devices respond to only RESET and AWAKE cmd - */ - if (host->card && mmc_card_is_sleep(host->card) && - host->bus_ops->resume) { - err = host->bus_ops->resume(host); - - if (!err) - mmc_poweroff_notify(host); - else - pr_warning("%s: error %d during resume " - "(continue with poweroff sequence)\n", - mmc_hostname(host), err); - } - - /* - * Reset ocr mask to be the highest possible voltage supported for - * this mmc host. This value will be used at next power up. - */ - host->ocr = 1 << (fls(host->ocr_avail) - 1); - if (!mmc_host_is_spi(host)) { host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; host->ios.chip_select = MMC_CS_DONTCARE; @@ -1394,6 +1601,14 @@ void mmc_power_off(struct mmc_host *host) mmc_host_clk_release(host); } +void mmc_power_cycle(struct mmc_host *host, u32 ocr) +{ + mmc_power_off(host); + /* Wait at least 1 ms according to SD spec */ + mmc_delay(1); + mmc_power_up(host, ocr); +} + /* * Cleanup when the last reference to the bus operator is dropped. */ @@ -1479,6 +1694,28 @@ void mmc_detach_bus(struct mmc_host *host) mmc_bus_put(host); } +static void _mmc_detect_change(struct mmc_host *host, unsigned long delay, + bool cd_irq) +{ +#ifdef CONFIG_MMC_DEBUG + unsigned long flags; + spin_lock_irqsave(&host->lock, flags); + WARN_ON(host->removed); + spin_unlock_irqrestore(&host->lock, flags); +#endif + + /* + * If the device is configured as wakeup, we prevent a new sleep for + * 5 s to give provision for user space to consume the event. + */ + if (cd_irq && !(host->caps & MMC_CAP_NEEDS_POLL) && + device_can_wakeup(mmc_dev(host))) + pm_wakeup_event(mmc_dev(host), 5000); + + host->detect_change = 1; + mmc_schedule_delayed_work(&host->detect, delay); +} + /** * mmc_detect_change - process change of state on a MMC socket * @host: host which changed state. @@ -1491,16 +1728,8 @@ void mmc_detach_bus(struct mmc_host *host) */ void mmc_detect_change(struct mmc_host *host, unsigned long delay) { -#ifdef CONFIG_MMC_DEBUG - unsigned long flags; - spin_lock_irqsave(&host->lock, flags); - WARN_ON(host->removed); - spin_unlock_irqrestore(&host->lock, flags); -#endif - host->detect_change = 1; - mmc_schedule_delayed_work(&host->detect, delay); + _mmc_detect_change(host, delay, true); } - EXPORT_SYMBOL(mmc_detect_change); void mmc_init_erase(struct mmc_card *card) @@ -1557,7 +1786,10 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, { unsigned int erase_timeout; - if (card->ext_csd.erase_group_def & 1) { + if (arg == MMC_DISCARD_ARG || + (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) { + erase_timeout = card->ext_csd.trim_timeout; + } else if (card->ext_csd.erase_group_def & 1) { /* High Capacity Erase Group Size uses HC timeouts */ if (arg == MMC_TRIM_ARG) erase_timeout = card->ext_csd.trim_timeout; @@ -1653,6 +1885,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, { struct mmc_command cmd = {0}; unsigned int qty = 0; + unsigned long timeout; int err; /* @@ -1718,7 +1951,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, cmd.opcode = MMC_ERASE; cmd.arg = arg; cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - cmd.cmd_timeout_ms = mmc_erase_timeout(card, arg, qty); + cmd.busy_timeout = mmc_erase_timeout(card, arg, qty); err = mmc_wait_for_cmd(card->host, &cmd, 0); if (err) { pr_err("mmc_erase: erase error %d, status %#x\n", @@ -1730,6 +1963,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, if (mmc_host_is_spi(card->host)) goto out; + timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS); do { memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SEND_STATUS; @@ -1743,8 +1977,19 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, err = -EIO; goto out; } + + /* Timeout if the device never becomes ready for data and + * never leaves the program state. + */ + if (time_after(jiffies, timeout)) { + pr_err("%s: Card stuck in programming state! %s\n", + mmc_hostname(card->host), __func__); + err = -EIO; + goto out; + } + } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || - R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG); + (R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG)); out: return err; } @@ -1829,8 +2074,6 @@ int mmc_can_trim(struct mmc_card *card) { if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN) return 1; - if (mmc_can_discard(card)) - return 1; return 0; } EXPORT_SYMBOL(mmc_can_trim); @@ -1849,6 +2092,8 @@ EXPORT_SYMBOL(mmc_can_discard); int mmc_can_sanitize(struct mmc_card *card) { + if (!mmc_can_trim(card) && !mmc_can_erase(card)) + return 0; if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE) return 1; return 0; @@ -1893,7 +2138,7 @@ static unsigned int mmc_do_calc_max_discard(struct mmc_card *card, y = 0; for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) { timeout = mmc_erase_timeout(card, arg, qty + x); - if (timeout > host->max_discard_to) + if (timeout > host->max_busy_timeout) break; if (timeout < last_timeout) break; @@ -1925,7 +2170,7 @@ unsigned int mmc_calc_max_discard(struct mmc_card *card) struct mmc_host *host = card->host; unsigned int max_discard, max_trim; - if (!host->max_discard_to) + if (!host->max_busy_timeout) return UINT_MAX; /* @@ -1945,7 +2190,7 @@ unsigned int mmc_calc_max_discard(struct mmc_card *card) max_discard = 0; } pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n", - mmc_hostname(host), max_discard, host->max_discard_to); + mmc_hostname(host), max_discard, host->max_busy_timeout); return max_discard; } EXPORT_SYMBOL(mmc_calc_max_discard); @@ -1954,7 +2199,7 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) { struct mmc_command cmd = {0}; - if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card)) + if (mmc_card_blockaddr(card) || mmc_card_ddr52(card)) return 0; cmd.opcode = MMC_SET_BLOCKLEN; @@ -1964,6 +2209,20 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) } EXPORT_SYMBOL(mmc_set_blocklen); +int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount, + bool is_rel_write) +{ + struct mmc_command cmd = {0}; + + cmd.opcode = MMC_SET_BLOCK_COUNT; + cmd.arg = blockcount & 0x0000FFFF; + if (is_rel_write) + cmd.arg |= 1 << 31; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + return mmc_wait_for_cmd(card->host, &cmd, 5); +} +EXPORT_SYMBOL(mmc_set_blockcount); + static void mmc_hw_reset_for_init(struct mmc_host *host) { if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset) @@ -1990,9 +2249,6 @@ static int mmc_do_hw_reset(struct mmc_host *host, int check) { struct mmc_card *card = host->card; - if (!host->bus_ops->power_restore) - return -EOPNOTSUPP; - if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset) return -EOPNOTSUPP; @@ -2023,7 +2279,6 @@ static int mmc_do_hw_reset(struct mmc_host *host, int check) } } - host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_DDR); if (mmc_host_is_spi(host)) { host->ios.chip_select = MMC_CS_HIGH; host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; @@ -2060,7 +2315,7 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) pr_info("%s: %s: trying to init card at %u Hz\n", mmc_hostname(host), __func__, host->f_init); #endif - mmc_power_up(host); + mmc_power_up(host, host->ocr_avail); /* * Some eMMCs (with VCCQ always on) may not be reset after power up, so @@ -2094,13 +2349,26 @@ int _mmc_detect_card_removed(struct mmc_host *host) { int ret; - if ((host->caps & MMC_CAP_NONREMOVABLE) || !host->bus_ops->alive) + if (host->caps & MMC_CAP_NONREMOVABLE) return 0; if (!host->card || mmc_card_removed(host->card)) return 1; ret = host->bus_ops->alive(host); + + /* + * Card detect status and alive check may be out of sync if card is + * removed slowly, when card detect switch changes while card/slot + * pads are still contacted in hardware (refer to "SD Card Mechanical + * Addendum, Appendix C: Card Detection Switch"). So reschedule a + * detect work 200ms later for this case. + */ + if (!ret && host->ops->get_cd && !host->ops->get_cd(host)) { + mmc_detect_change(host, msecs_to_jiffies(200)); + pr_debug("%s: card removed too slowly\n", mmc_hostname(host)); + } + if (ret) { mmc_card_set_removed(host->card); pr_debug("%s: card remove detected\n", mmc_hostname(host)); @@ -2112,38 +2380,64 @@ int _mmc_detect_card_removed(struct mmc_host *host) int mmc_detect_card_removed(struct mmc_host *host) { struct mmc_card *card = host->card; + int ret; WARN_ON(!host->claimed); + + if (!card) + return 1; + + ret = mmc_card_removed(card); /* * The card will be considered unchanged unless we have been asked to * detect a change or host requires polling to provide card detection. */ - if (card && !host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL)) - return mmc_card_removed(card); + if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL)) + return ret; host->detect_change = 0; + if (!ret) { + ret = _mmc_detect_card_removed(host); + if (ret && (host->caps & MMC_CAP_NEEDS_POLL)) { + /* + * Schedule a detect work as soon as possible to let a + * rescan handle the card removal. + */ + cancel_delayed_work(&host->detect); + _mmc_detect_change(host, 0, false); + } + } - return _mmc_detect_card_removed(host); + return ret; } EXPORT_SYMBOL(mmc_detect_card_removed); void mmc_rescan(struct work_struct *work) { - static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; struct mmc_host *host = container_of(work, struct mmc_host, detect.work); int i; + if (host->trigger_card_event && host->ops->card_event) { + host->ops->card_event(host); + host->trigger_card_event = false; + } + if (host->rescan_disable) return; + /* If there is a non-removable card registered, only scan once */ + if ((host->caps & MMC_CAP_NONREMOVABLE) && host->rescan_entered) + return; + host->rescan_entered = 1; + mmc_bus_get(host); /* * if there is a _removable_ card registered, check whether it is * still present */ - if (host->bus_ops && host->bus_ops->detect && !host->bus_dead + if (host->bus_ops && !host->bus_dead && !(host->caps & MMC_CAP_NONREMOVABLE)) host->bus_ops->detect(host); @@ -2168,8 +2462,13 @@ void mmc_rescan(struct work_struct *work) */ mmc_bus_put(host); - if (host->ops->get_cd && host->ops->get_cd(host) == 0) + if (!(host->caps & MMC_CAP_NONREMOVABLE) && host->ops->get_cd && + host->ops->get_cd(host) == 0) { + mmc_claim_host(host); + mmc_power_off(host); + mmc_release_host(host); goto out; + } mmc_claim_host(host); for (i = 0; i < ARRAY_SIZE(freqs); i++) { @@ -2187,8 +2486,14 @@ void mmc_rescan(struct work_struct *work) void mmc_start_host(struct mmc_host *host) { - mmc_power_off(host); - mmc_detect_change(host, 0); + host->f_init = max(freqs[0], host->f_min); + host->rescan_disable = 0; + if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP) + mmc_power_off(host); + else + mmc_power_up(host, host->ocr_avail); + mmc_gpiod_request_cd_irq(host); + _mmc_detect_change(host, 0, false); } void mmc_stop_host(struct mmc_host *host) @@ -2199,9 +2504,10 @@ void mmc_stop_host(struct mmc_host *host) host->removed = 1; spin_unlock_irqrestore(&host->lock, flags); #endif + if (host->slot.cd_irq >= 0) + disable_irq(host->slot.cd_irq); - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); + host->rescan_disable = 1; cancel_delayed_work_sync(&host->detect); mmc_flush_scheduled_work(); @@ -2211,9 +2517,7 @@ void mmc_stop_host(struct mmc_host *host) mmc_bus_get(host); if (host->bus_ops && !host->bus_dead) { /* Calling bus_ops->remove() with a claimed host can deadlock */ - if (host->bus_ops->remove) - host->bus_ops->remove(host); - + host->bus_ops->remove(host); mmc_claim_host(host); mmc_detach_bus(host); mmc_power_off(host); @@ -2238,7 +2542,7 @@ int mmc_power_save_host(struct mmc_host *host) mmc_bus_get(host); - if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) { + if (!host->bus_ops || host->bus_dead) { mmc_bus_put(host); return -EINVAL; } @@ -2264,12 +2568,12 @@ int mmc_power_restore_host(struct mmc_host *host) mmc_bus_get(host); - if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) { + if (!host->bus_ops || host->bus_dead) { mmc_bus_put(host); return -EINVAL; } - mmc_power_up(host); + mmc_power_up(host, host->card->ocr); ret = host->bus_ops->power_restore(host); mmc_bus_put(host); @@ -2278,63 +2582,13 @@ int mmc_power_restore_host(struct mmc_host *host) } EXPORT_SYMBOL(mmc_power_restore_host); -int mmc_card_awake(struct mmc_host *host) -{ - int err = -ENOSYS; - - if (host->caps2 & MMC_CAP2_NO_SLEEP_CMD) - return 0; - - mmc_bus_get(host); - - if (host->bus_ops && !host->bus_dead && host->bus_ops->awake) - err = host->bus_ops->awake(host); - - mmc_bus_put(host); - - return err; -} -EXPORT_SYMBOL(mmc_card_awake); - -int mmc_card_sleep(struct mmc_host *host) -{ - int err = -ENOSYS; - - if (host->caps2 & MMC_CAP2_NO_SLEEP_CMD) - return 0; - - mmc_bus_get(host); - - if (host->bus_ops && !host->bus_dead && host->bus_ops->sleep) - err = host->bus_ops->sleep(host); - - mmc_bus_put(host); - - return err; -} -EXPORT_SYMBOL(mmc_card_sleep); - -int mmc_card_can_sleep(struct mmc_host *host) -{ - struct mmc_card *card = host->card; - - if (card && mmc_card_mmc(card) && card->ext_csd.rev >= 3) - return 1; - return 0; -} -EXPORT_SYMBOL(mmc_card_can_sleep); - /* * Flush the cache to the non-volatile storage. */ int mmc_flush_cache(struct mmc_card *card) { - struct mmc_host *host = card->host; int err = 0; - if (!(host->caps2 & MMC_CAP2_CACHE_CTRL)) - return err; - if (mmc_card_mmc(card) && (card->ext_csd.cache_size > 0) && (card->ext_csd.cache_ctrl & 1)) { @@ -2349,155 +2603,8 @@ int mmc_flush_cache(struct mmc_card *card) } EXPORT_SYMBOL(mmc_flush_cache); -/* - * Turn the cache ON/OFF. - * Turning the cache OFF shall trigger flushing of the data - * to the non-volatile storage. - */ -int mmc_cache_ctrl(struct mmc_host *host, u8 enable) -{ - struct mmc_card *card = host->card; - unsigned int timeout; - int err = 0; - - if (!(host->caps2 & MMC_CAP2_CACHE_CTRL) || - mmc_card_is_removable(host)) - return err; - - if (card && mmc_card_mmc(card) && - (card->ext_csd.cache_size > 0)) { - enable = !!enable; - - if (card->ext_csd.cache_ctrl ^ enable) { - timeout = enable ? card->ext_csd.generic_cmd6_time : 0; - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_CACHE_CTRL, enable, timeout); - if (err) - pr_err("%s: cache %s error %d\n", - mmc_hostname(card->host), - enable ? "on" : "off", - err); - else - card->ext_csd.cache_ctrl = enable; - } - } - - return err; -} -EXPORT_SYMBOL(mmc_cache_ctrl); - #ifdef CONFIG_PM -/** - * mmc_suspend_host - suspend a host - * @host: mmc host - */ -int mmc_suspend_host(struct mmc_host *host) -{ - int err = 0; - - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); - cancel_delayed_work(&host->detect); - mmc_flush_scheduled_work(); - if (mmc_try_claim_host(host)) { - err = mmc_cache_ctrl(host, 0); - mmc_do_release_host(host); - } else { - err = -EBUSY; - } - - if (err) - goto out; - - mmc_bus_get(host); - if (host->bus_ops && !host->bus_dead) { - - /* - * A long response time is not acceptable for device drivers - * when doing suspend. Prevent mmc_claim_host in the suspend - * sequence, to potentially wait "forever" by trying to - * pre-claim the host. - */ - if (mmc_try_claim_host(host)) { - if (host->bus_ops->suspend) { - err = host->bus_ops->suspend(host); - } - mmc_do_release_host(host); - - if (err == -ENOSYS || !host->bus_ops->resume) { - /* - * We simply "remove" the card in this case. - * It will be redetected on resume. (Calling - * bus_ops->remove() with a claimed host can - * deadlock.) - */ - if (host->bus_ops->remove) - host->bus_ops->remove(host); - mmc_claim_host(host); - mmc_detach_bus(host); - mmc_power_off(host); - mmc_release_host(host); - host->pm_flags = 0; - err = 0; - } - } else { - err = -EBUSY; - } - } - mmc_bus_put(host); - - if (!err && !mmc_card_keep_power(host)) - mmc_power_off(host); - -out: - return err; -} - -EXPORT_SYMBOL(mmc_suspend_host); - -/** - * mmc_resume_host - resume a previously suspended host - * @host: mmc host - */ -int mmc_resume_host(struct mmc_host *host) -{ - int err = 0; - - mmc_bus_get(host); - if (host->bus_ops && !host->bus_dead) { - if (!mmc_card_keep_power(host)) { - mmc_power_up(host); - mmc_select_voltage(host, host->ocr); - /* - * Tell runtime PM core we just powered up the card, - * since it still believes the card is powered off. - * Note that currently runtime PM is only enabled - * for SDIO cards that are MMC_CAP_POWER_OFF_CARD - */ - if (mmc_card_sdio(host->card) && - (host->caps & MMC_CAP_POWER_OFF_CARD)) { - pm_runtime_disable(&host->card->dev); - pm_runtime_set_active(&host->card->dev); - pm_runtime_enable(&host->card->dev); - } - } - BUG_ON(!host->bus_ops->resume); - err = host->bus_ops->resume(host); - if (err) { - pr_warning("%s: error %d during resume " - "(card was removed?)\n", - mmc_hostname(host), err); - err = 0; - } - } - host->pm_flags &= ~MMC_PM_KEEP_POWER; - mmc_bus_put(host); - - return err; -} -EXPORT_SYMBOL(mmc_resume_host); - /* Do the card removal on suspend if card is assumed removeable * Do that in pm notifier while userspace isn't yet frozen, so we will be able to sync the card. @@ -2508,25 +2615,27 @@ int mmc_pm_notify(struct notifier_block *notify_block, struct mmc_host *host = container_of( notify_block, struct mmc_host, pm_notify); unsigned long flags; - + int err = 0; switch (mode) { case PM_HIBERNATION_PREPARE: case PM_SUSPEND_PREPARE: - spin_lock_irqsave(&host->lock, flags); host->rescan_disable = 1; - host->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT; spin_unlock_irqrestore(&host->lock, flags); cancel_delayed_work_sync(&host->detect); - if (!host->bus_ops || host->bus_ops->suspend) + if (!host->bus_ops) break; - /* Calling bus_ops->remove() with a claimed host can deadlock */ - if (host->bus_ops->remove) - host->bus_ops->remove(host); + /* Validate prerequisites for suspend */ + if (host->bus_ops->pre_suspend) + err = host->bus_ops->pre_suspend(host); + if (!err) + break; + /* Calling bus_ops->remove() with a claimed host can deadlock */ + host->bus_ops->remove(host); mmc_claim_host(host); mmc_detach_bus(host); mmc_power_off(host); @@ -2540,9 +2649,8 @@ int mmc_pm_notify(struct notifier_block *notify_block, spin_lock_irqsave(&host->lock, flags); host->rescan_disable = 0; - host->power_notify_type = MMC_HOST_PW_NOTIFY_LONG; spin_unlock_irqrestore(&host->lock, flags); - mmc_detect_change(host, 0); + _mmc_detect_change(host, 0, false); } @@ -2550,6 +2658,23 @@ int mmc_pm_notify(struct notifier_block *notify_block, } #endif +/** + * mmc_init_context_info() - init synchronization context + * @host: mmc host + * + * Init struct context_info needed to implement asynchronous + * request mechanism, used by mmc core, host driver and mmc requests + * supplier. + */ +void mmc_init_context_info(struct mmc_host *host) +{ + spin_lock_init(&host->context_info.lock); + host->context_info.is_new_req = false; + host->context_info.is_done_rcv = false; + host->context_info.is_waiting_last_req = false; + init_waitqueue_head(&host->context_info.wait); +} + static int __init mmc_init(void) { int ret; |