diff options
Diffstat (limited to 'drivers/mmc/card/block.c')
| -rw-r--r-- | drivers/mmc/card/block.c | 338 |
1 files changed, 245 insertions, 93 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 5bab73b91c2..452782bffeb 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -34,6 +34,7 @@ #include <linux/delay.h> #include <linux/capability.h> #include <linux/compat.h> +#include <linux/pm_runtime.h> #include <linux/mmc/ioctl.h> #include <linux/mmc/card.h> @@ -58,6 +59,8 @@ MODULE_ALIAS("mmc:block"); #define INAND_CMD38_ARG_SECTRIM1 0x81 #define INAND_CMD38_ARG_SECTRIM2 0x88 #define MMC_BLK_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ +#define MMC_SANITIZE_REQ_TIMEOUT 240000 +#define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16) #define mmc_req_rel_wr(req) (((req->cmd_flags & REQ_FUA) || \ (req->cmd_flags & REQ_META)) && \ @@ -222,7 +225,7 @@ static ssize_t power_ro_lock_store(struct device *dev, md = mmc_blk_get(dev_to_disk(dev)); card = md->queue.card; - mmc_claim_host(card->host); + mmc_get_card(card); ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP, card->ext_csd.boot_ro_lock | @@ -233,7 +236,7 @@ static ssize_t power_ro_lock_store(struct device *dev, else card->ext_csd.boot_ro_lock |= EXT_CSD_BOOT_WP_B_PWR_WP_EN; - mmc_release_host(card->host); + mmc_put_card(card); if (!ret) { pr_info("%s: Locking boot partition ro until next power on\n", @@ -304,14 +307,13 @@ static int mmc_blk_open(struct block_device *bdev, fmode_t mode) return ret; } -static int mmc_blk_release(struct gendisk *disk, fmode_t mode) +static void mmc_blk_release(struct gendisk *disk, fmode_t mode) { struct mmc_blk_data *md = disk->private_data; mutex_lock(&block_mutex); mmc_blk_put(md); mutex_unlock(&block_mutex); - return 0; } static int @@ -409,6 +411,34 @@ static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status, return err; } +static int ioctl_do_sanitize(struct mmc_card *card) +{ + int err; + + if (!mmc_can_sanitize(card)) { + pr_warn("%s: %s - SANITIZE is not supported\n", + mmc_hostname(card->host), __func__); + err = -EOPNOTSUPP; + goto out; + } + + pr_debug("%s: %s - SANITIZE IN PROGRESS...\n", + mmc_hostname(card->host), __func__); + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_SANITIZE_START, 1, + MMC_SANITIZE_REQ_TIMEOUT); + + if (err) + pr_err("%s: %s - EXT_CSD_SANITIZE_START failed. err=%d\n", + mmc_hostname(card->host), __func__, err); + + pr_debug("%s: %s - SANITIZE COMPLETED\n", mmc_hostname(card->host), + __func__); +out: + return err; +} + static int mmc_blk_ioctl_cmd(struct block_device *bdev, struct mmc_ioc_cmd __user *ic_ptr) { @@ -492,7 +522,7 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev, mrq.cmd = &cmd; - mmc_claim_host(card->host); + mmc_get_card(card); err = mmc_blk_part_switch(card, md); if (err) @@ -511,6 +541,17 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev, goto cmd_rel_host; } + if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_SANITIZE_START) && + (cmd.opcode == MMC_SWITCH)) { + err = ioctl_do_sanitize(card); + + if (err) + pr_err("%s: ioctl_do_sanitize() failed. err = %d", + __func__, err); + + goto cmd_rel_host; + } + mmc_wait_for_req(card->host, &mrq); if (cmd.error) { @@ -559,7 +600,7 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev, } cmd_rel_host: - mmc_release_host(card->host); + mmc_put_card(card); cmd_done: mmc_blk_put(md); @@ -680,19 +721,6 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) return result; } -static int send_stop(struct mmc_card *card, u32 *status) -{ - struct mmc_command cmd = {0}; - int err; - - cmd.opcode = MMC_STOP_TRANSMISSION; - cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - err = mmc_wait_for_cmd(card->host, &cmd, 5); - if (err == 0) - *status = cmd.resp[0]; - return err; -} - static int get_card_status(struct mmc_card *card, u32 *status, int retries) { struct mmc_command cmd = {0}; @@ -708,6 +736,99 @@ static int get_card_status(struct mmc_card *card, u32 *status, int retries) return err; } +static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, + bool hw_busy_detect, struct request *req, int *gen_err) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); + int err = 0; + u32 status; + + do { + err = get_card_status(card, &status, 5); + if (err) { + pr_err("%s: error %d requesting status\n", + req->rq_disk->disk_name, err); + return err; + } + + if (status & R1_ERROR) { + pr_err("%s: %s: error sending status cmd, status %#x\n", + req->rq_disk->disk_name, __func__, status); + *gen_err = 1; + } + + /* We may rely on the host hw to handle busy detection.*/ + if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && + hw_busy_detect) + break; + + /* + * Timeout if the device never becomes ready for data and never + * leaves the program state. + */ + if (time_after(jiffies, timeout)) { + pr_err("%s: Card stuck in programming state! %s %s\n", + mmc_hostname(card->host), + req->rq_disk->disk_name, __func__); + return -ETIMEDOUT; + } + + /* + * Some cards mishandle the status bits, + * so make sure to check both the busy + * indication and the card state. + */ + } while (!(status & R1_READY_FOR_DATA) || + (R1_CURRENT_STATE(status) == R1_STATE_PRG)); + + return err; +} + +static int send_stop(struct mmc_card *card, unsigned int timeout_ms, + struct request *req, int *gen_err, u32 *stop_status) +{ + struct mmc_host *host = card->host; + struct mmc_command cmd = {0}; + int err; + bool use_r1b_resp = rq_data_dir(req) == WRITE; + + /* + * Normally we use R1B responses for WRITE, but in cases where the host + * has specified a max_busy_timeout we need to validate it. A failure + * means we need to prevent the host from doing hw busy detection, which + * is done by converting to a R1 response instead. + */ + if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) + use_r1b_resp = false; + + cmd.opcode = MMC_STOP_TRANSMISSION; + if (use_r1b_resp) { + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = timeout_ms; + } else { + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + } + + err = mmc_wait_for_cmd(host, &cmd, 5); + if (err) + return err; + + *stop_status = cmd.resp[0]; + + /* No need to check card status in case of READ. */ + if (rq_data_dir(req) == READ) + return 0; + + if (!mmc_host_is_spi(host) && + (*stop_status & R1_ERROR)) { + pr_err("%s: %s: general error sending stop command, resp %#x\n", + req->rq_disk->disk_name, __func__, *stop_status); + *gen_err = 1; + } + + return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err); +} + #define ERR_NOMEDIUM 3 #define ERR_RETRY 2 #define ERR_ABORT 1 @@ -770,7 +891,7 @@ static int mmc_blk_cmd_error(struct request *req, const char *name, int error, * Otherwise we don't understand what happened, so abort. */ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, - struct mmc_blk_request *brq, int *ecc_err) + struct mmc_blk_request *brq, int *ecc_err, int *gen_err) { bool prev_cmd_status_valid = true; u32 status, stop_status = 0; @@ -808,23 +929,35 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, (brq->cmd.resp[0] & R1_CARD_ECC_FAILED)) *ecc_err = 1; + /* Flag General errors */ + if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) + if ((status & R1_ERROR) || + (brq->stop.resp[0] & R1_ERROR)) { + pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n", + req->rq_disk->disk_name, __func__, + brq->stop.resp[0], status); + *gen_err = 1; + } + /* * Check the current card state. If it is in some data transfer * mode, tell it to stop (and hopefully transition back to TRAN.) */ if (R1_CURRENT_STATE(status) == R1_STATE_DATA || R1_CURRENT_STATE(status) == R1_STATE_RCV) { - err = send_stop(card, &stop_status); - if (err) + err = send_stop(card, + DIV_ROUND_UP(brq->data.timeout_ns, 1000000), + req, gen_err, &stop_status); + if (err) { pr_err("%s: error %d sending stop command\n", req->rq_disk->disk_name, err); - - /* - * If the stop cmd also timed out, the card is probably - * not present, so abort. Other errors are bad news too. - */ - if (err) + /* + * If the stop cmd also timed out, the card is probably + * not present, so abort. Other errors are bad news too. + */ return ERR_ABORT; + } + if (stop_status & R1_CARD_ECC_FAILED) *ecc_err = 1; } @@ -940,10 +1073,10 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, { struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; - unsigned int from, nr, arg, trim_arg, erase_arg; + unsigned int from, nr, arg; int err = 0, type = MMC_BLK_SECDISCARD; - if (!(mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))) { + if (!(mmc_can_secure_erase_trim(card))) { err = -EOPNOTSUPP; goto out; } @@ -951,23 +1084,11 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, from = blk_rq_pos(req); nr = blk_rq_sectors(req); - /* The sanitize operation is supported at v4.5 only */ - if (mmc_can_sanitize(card)) { - erase_arg = MMC_ERASE_ARG; - trim_arg = MMC_TRIM_ARG; - } else { - erase_arg = MMC_SECURE_ERASE_ARG; - trim_arg = MMC_SECURE_TRIM1_ARG; - } + if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr)) + arg = MMC_SECURE_TRIM1_ARG; + else + arg = MMC_SECURE_ERASE_ARG; - if (mmc_erase_group_aligned(card, from, nr)) - arg = erase_arg; - else if (mmc_can_trim(card)) - arg = trim_arg; - else { - err = -EINVAL; - goto out; - } retry: if (card->quirks & MMC_QUIRK_INAND_CMD38) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, @@ -1003,9 +1124,6 @@ retry: goto out; } - if (mmc_can_sanitize(card)) - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_SANITIZE_START, 1, 0); out_retry: if (err && !mmc_blk_reset(md, card->host, type)) goto retry; @@ -1070,7 +1188,7 @@ static int mmc_blk_err_check(struct mmc_card *card, mmc_active); struct mmc_blk_request *brq = &mq_mrq->brq; struct request *req = mq_mrq->req; - int ecc_err = 0; + int ecc_err = 0, gen_err = 0; /* * sbc.error indicates a problem with the set block count @@ -1084,7 +1202,7 @@ static int mmc_blk_err_check(struct mmc_card *card, */ if (brq->sbc.error || brq->cmd.error || brq->stop.error || brq->data.error) { - switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err)) { + switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) { case ERR_RETRY: return MMC_BLK_RETRY; case ERR_ABORT: @@ -1113,35 +1231,27 @@ static int mmc_blk_err_check(struct mmc_card *card, * program mode, which we have to wait for it to complete. */ if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { - u32 status; - unsigned long timeout; - - timeout = jiffies + msecs_to_jiffies(MMC_BLK_TIMEOUT_MS); - do { - int err = get_card_status(card, &status, 5); - if (err) { - pr_err("%s: error %d requesting status\n", - req->rq_disk->disk_name, err); - return MMC_BLK_CMD_ERR; - } + int err; + + /* Check stop command response */ + if (brq->stop.resp[0] & R1_ERROR) { + pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n", + req->rq_disk->disk_name, __func__, + brq->stop.resp[0]); + gen_err = 1; + } - /* Timeout if the device never becomes ready for data - * and never leaves the program state. - */ - if (time_after(jiffies, timeout)) { - pr_err("%s: Card stuck in programming state!"\ - " %s %s\n", mmc_hostname(card->host), - req->rq_disk->disk_name, __func__); + err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req, + &gen_err); + if (err) + return MMC_BLK_CMD_ERR; + } - return MMC_BLK_CMD_ERR; - } - /* - * Some cards mishandle the status bits, - * so make sure to check both the busy - * indication and the card state. - */ - } while (!(status & R1_READY_FOR_DATA) || - (R1_CURRENT_STATE(status) == R1_STATE_PRG)); + /* if general error occurs, retry the write operation. */ + if (gen_err) { + pr_warn("%s: retrying write for general error\n", + req->rq_disk->disk_name); + return MMC_BLK_RETRY; } if (brq->data.error) { @@ -1269,7 +1379,6 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, brq->data.blksz = 512; brq->stop.opcode = MMC_STOP_TRANSMISSION; brq->stop.arg = 0; - brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; brq->data.blocks = blk_rq_sectors(req); /* @@ -1312,9 +1421,15 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, if (rq_data_dir(req) == READ) { brq->cmd.opcode = readcmd; brq->data.flags |= MMC_DATA_READ; + if (brq->mrq.stop) + brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | + MMC_CMD_AC; } else { brq->cmd.opcode = writecmd; brq->data.flags |= MMC_DATA_WRITE; + if (brq->mrq.stop) + brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | + MMC_CMD_AC; } if (do_rel_wr) @@ -1893,10 +2008,11 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_card *card = md->queue.card; struct mmc_host *host = card->host; unsigned long flags; + unsigned int cmd_flags = req ? req->cmd_flags : 0; if (req && !mq->mqrq_prev->req) /* claim host only for the first request */ - mmc_claim_host(card->host); + mmc_get_card(card); ret = mmc_blk_part_switch(card, md); if (ret) { @@ -1908,7 +2024,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) } mq->flags &= ~MMC_QUEUE_NEW_REQUEST; - if (req && req->cmd_flags & REQ_DISCARD) { + if (cmd_flags & REQ_DISCARD) { /* complete ongoing async transfer before issuing discard */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); @@ -1917,7 +2033,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) ret = mmc_blk_issue_secdiscard_rq(mq, req); else ret = mmc_blk_issue_discard_rq(mq, req); - } else if (req && req->cmd_flags & REQ_FLUSH) { + } else if (cmd_flags & REQ_FLUSH) { /* complete ongoing async transfer before issuing flush */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); @@ -1932,9 +2048,15 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) } out: - if (!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) - /* release host only when there are no more requests */ - mmc_release_host(card->host); + if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) || + (cmd_flags & MMC_REQ_SPECIAL_MASK)) + /* + * Release host when there are no more requests + * and after special request(discard, flush) is done. + * In case sepecial request, there is no reentry to + * the 'mmc_blk_issue_rq' with 'mqrq_prev->req'. + */ + mmc_put_card(card); return ret; } @@ -2153,7 +2275,15 @@ static void mmc_blk_remove_req(struct mmc_blk_data *md) struct mmc_card *card; if (md) { + /* + * Flush remaining requests and free queues. It + * is freeing the queue that stops new requests + * from being accepted. + */ card = md->queue.card; + mmc_cleanup_queue(&md->queue); + if (md->flags & MMC_BLK_PACKED_CMD) + mmc_packed_clean(&md->queue); if (md->disk->flags & GENHD_FL_UP) { device_remove_file(disk_to_dev(md->disk), &md->force_ro); if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) && @@ -2161,14 +2291,8 @@ static void mmc_blk_remove_req(struct mmc_blk_data *md) device_remove_file(disk_to_dev(md->disk), &md->power_ro_lock); - /* Stop new requests from getting into the queue */ del_gendisk(md->disk); } - - /* Then flush out any already in there */ - mmc_cleanup_queue(&md->queue); - if (md->flags & MMC_BLK_PACKED_CMD) - mmc_packed_clean(&md->queue); mmc_blk_put(md); } } @@ -2331,6 +2455,19 @@ static int mmc_blk_probe(struct mmc_card *card) if (mmc_add_disk(part_md)) goto out; } + + pm_runtime_set_autosuspend_delay(&card->dev, 3000); + pm_runtime_use_autosuspend(&card->dev); + + /* + * Don't enable runtime PM for SD-combo cards here. Leave that + * decision to be taken during the SDIO init sequence instead. + */ + if (card->type != MMC_TYPE_SD_COMBO) { + pm_runtime_set_active(&card->dev); + pm_runtime_enable(&card->dev); + } + return 0; out: @@ -2344,15 +2481,18 @@ static void mmc_blk_remove(struct mmc_card *card) struct mmc_blk_data *md = mmc_get_drvdata(card); mmc_blk_remove_parts(card, md); + pm_runtime_get_sync(&card->dev); mmc_claim_host(card->host); mmc_blk_part_switch(card, md); mmc_release_host(card->host); + if (card->type != MMC_TYPE_SD_COMBO) + pm_runtime_disable(&card->dev); + pm_runtime_put_noidle(&card->dev); mmc_blk_remove_req(md); mmc_set_drvdata(card, NULL); } -#ifdef CONFIG_PM -static int mmc_blk_suspend(struct mmc_card *card) +static int _mmc_blk_suspend(struct mmc_card *card) { struct mmc_blk_data *part_md; struct mmc_blk_data *md = mmc_get_drvdata(card); @@ -2366,6 +2506,17 @@ static int mmc_blk_suspend(struct mmc_card *card) return 0; } +static void mmc_blk_shutdown(struct mmc_card *card) +{ + _mmc_blk_suspend(card); +} + +#ifdef CONFIG_PM +static int mmc_blk_suspend(struct mmc_card *card) +{ + return _mmc_blk_suspend(card); +} + static int mmc_blk_resume(struct mmc_card *card) { struct mmc_blk_data *part_md; @@ -2397,6 +2548,7 @@ static struct mmc_driver mmc_driver = { .remove = mmc_blk_remove, .suspend = mmc_blk_suspend, .resume = mmc_blk_resume, + .shutdown = mmc_blk_shutdown, }; static int __init mmc_blk_init(void) |
