aboutsummaryrefslogtreecommitdiff
path: root/drivers/misc/eeprom
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/eeprom')
-rw-r--r--drivers/misc/eeprom/Kconfig24
-rw-r--r--drivers/misc/eeprom/Makefile1
-rw-r--r--drivers/misc/eeprom/at24.c49
-rw-r--r--drivers/misc/eeprom/at25.c37
-rw-r--r--drivers/misc/eeprom/eeprom.c3
-rw-r--r--drivers/misc/eeprom/eeprom_93xx46.c8
-rw-r--r--drivers/misc/eeprom/max6875.c1
-rw-r--r--drivers/misc/eeprom/sunxi_sid.c157
8 files changed, 217 insertions, 63 deletions
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index c9e695ea7c9..9536852fd4c 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -1,13 +1,14 @@
menu "EEPROM support"
config EEPROM_AT24
- tristate "I2C EEPROMs from most vendors"
+ tristate "I2C EEPROMs / RAMs / ROMs from most vendors"
depends on I2C && SYSFS
help
- Enable this driver to get read/write support to most I2C EEPROMs,
- after you configure the driver to know about each EEPROM on
- your target board. Use these generic chip names, instead of
- vendor-specific ones like at24c64 or 24lc02:
+ Enable this driver to get read/write support to most I2C EEPROMs
+ and compatible devices like FRAMs, SRAMs, ROMs etc. After you
+ configure the driver to know about each chip on your target
+ board. Use these generic chip names, instead of vendor-specific
+ ones like at24c64, 24lc02 or fm24c04:
24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
@@ -95,4 +96,17 @@ config EEPROM_DIGSY_MTC_CFG
If unsure, say N.
+config EEPROM_SUNXI_SID
+ tristate "Allwinner sunxi security ID support"
+ depends on ARCH_SUNXI && SYSFS
+ help
+ This is a driver for the 'security ID' available on various Allwinner
+ devices.
+
+ Due to the potential risks involved with changing e-fuses,
+ this driver is read-only.
+
+ This driver can also be built as a module. If so, the module
+ will be called sunxi_sid.
+
endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index fc1e81d2926..9507aec95e9 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -4,4 +4,5 @@ obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
obj-$(CONFIG_EEPROM_MAX6875) += max6875.o
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o
+obj-$(CONFIG_EEPROM_SUNXI_SID) += sunxi_sid.o
obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2baeec56edf..d87f77f790d 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -22,7 +22,7 @@
#include <linux/jiffies.h>
#include <linux/of.h>
#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
/*
* I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
@@ -428,6 +428,9 @@ static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj,
{
struct at24_data *at24;
+ if (unlikely(off >= attr->size))
+ return -EFBIG;
+
at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
return at24_write(at24, buf, off, count);
}
@@ -492,10 +495,9 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (client->dev.platform_data) {
chip = *(struct at24_platform_data *)client->dev.platform_data;
} else {
- if (!id->driver_data) {
- err = -ENODEV;
- goto err_out;
- }
+ if (!id->driver_data)
+ return -ENODEV;
+
magic = id->driver_data;
chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
magic >>= AT24_SIZE_BYTELEN;
@@ -519,8 +521,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
"byte_len looks suspicious (no power of 2)!\n");
if (!chip.page_size) {
dev_err(&client->dev, "page_size must not be 0!\n");
- err = -EINVAL;
- goto err_out;
+ return -EINVAL;
}
if (!is_power_of_2(chip.page_size))
dev_warn(&client->dev,
@@ -528,10 +529,9 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
/* Use I2C operations unless we're stuck with SMBus extensions. */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
- if (chip.flags & AT24_FLAG_ADDR16) {
- err = -EPFNOSUPPORT;
- goto err_out;
- }
+ if (chip.flags & AT24_FLAG_ADDR16)
+ return -EPFNOSUPPORT;
+
if (i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
use_smbus = I2C_SMBUS_I2C_BLOCK_DATA;
@@ -542,8 +542,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
use_smbus = I2C_SMBUS_BYTE_DATA;
} else {
- err = -EPFNOSUPPORT;
- goto err_out;
+ return -EPFNOSUPPORT;
}
}
@@ -553,12 +552,10 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
num_addresses = DIV_ROUND_UP(chip.byte_len,
(chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
- at24 = kzalloc(sizeof(struct at24_data) +
+ at24 = devm_kzalloc(&client->dev, sizeof(struct at24_data) +
num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
- if (!at24) {
- err = -ENOMEM;
- goto err_out;
- }
+ if (!at24)
+ return -ENOMEM;
mutex_init(&at24->lock);
at24->use_smbus = use_smbus;
@@ -596,11 +593,10 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
at24->write_max = write_max;
/* buffer (data + address at the beginning) */
- at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
- if (!at24->writebuf) {
- err = -ENOMEM;
- goto err_struct;
- }
+ at24->writebuf = devm_kzalloc(&client->dev,
+ write_max + 2, GFP_KERNEL);
+ if (!at24->writebuf)
+ return -ENOMEM;
} else {
dev_warn(&client->dev,
"cannot write due to controller restrictions.");
@@ -648,11 +644,6 @@ err_clients:
if (at24->client[i])
i2c_unregister_device(at24->client[i]);
- kfree(at24->writebuf);
-err_struct:
- kfree(at24);
-err_out:
- dev_dbg(&client->dev, "probe error %d\n", err);
return err;
}
@@ -667,8 +658,6 @@ static int at24_remove(struct i2c_client *client)
for (i = 1; i < at24->num_addresses; i++)
i2c_unregister_device(at24->client[i]);
- kfree(at24->writebuf);
- kfree(at24);
return 0;
}
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index b08cf8a0878..634f72929e1 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -10,7 +10,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -371,11 +370,10 @@ static int at25_probe(struct spi_device *spi)
if (np) {
err = at25_np_to_chip(&spi->dev, np, &chip);
if (err)
- goto fail;
+ return err;
} else {
dev_err(&spi->dev, "Error: no chip description\n");
- err = -ENODEV;
- goto fail;
+ return -ENODEV;
}
} else
chip = *(struct spi_eeprom *)spi->dev.platform_data;
@@ -389,8 +387,7 @@ static int at25_probe(struct spi_device *spi)
addrlen = 3;
else {
dev_dbg(&spi->dev, "unsupported address type\n");
- err = -EINVAL;
- goto fail;
+ return -EINVAL;
}
/* Ping the chip ... the status register is pretty portable,
@@ -400,19 +397,17 @@ static int at25_probe(struct spi_device *spi)
sr = spi_w8r8(spi, AT25_RDSR);
if (sr < 0 || sr & AT25_SR_nRDY) {
dev_dbg(&spi->dev, "rdsr --> %d (%02x)\n", sr, sr);
- err = -ENXIO;
- goto fail;
+ return -ENXIO;
}
- if (!(at25 = kzalloc(sizeof *at25, GFP_KERNEL))) {
- err = -ENOMEM;
- goto fail;
- }
+ at25 = devm_kzalloc(&spi->dev, sizeof(struct at25_data), GFP_KERNEL);
+ if (!at25)
+ return -ENOMEM;
mutex_init(&at25->lock);
at25->chip = chip;
at25->spi = spi_dev_get(spi);
- dev_set_drvdata(&spi->dev, at25);
+ spi_set_drvdata(spi, at25);
at25->addrlen = addrlen;
/* Export the EEPROM bytes through sysfs, since that's convenient.
@@ -439,7 +434,7 @@ static int at25_probe(struct spi_device *spi)
err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin);
if (err)
- goto fail;
+ return err;
if (chip.setup)
chip.setup(&at25->mem, chip.context);
@@ -453,28 +448,30 @@ static int at25_probe(struct spi_device *spi)
(chip.flags & EE_READONLY) ? " (readonly)" : "",
at25->chip.page_size);
return 0;
-fail:
- dev_dbg(&spi->dev, "probe err %d\n", err);
- kfree(at25);
- return err;
}
static int at25_remove(struct spi_device *spi)
{
struct at25_data *at25;
- at25 = dev_get_drvdata(&spi->dev);
+ at25 = spi_get_drvdata(spi);
sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin);
- kfree(at25);
return 0;
}
/*-------------------------------------------------------------------------*/
+static const struct of_device_id at25_of_match[] = {
+ { .compatible = "atmel,at25", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, at25_of_match);
+
static struct spi_driver at25_driver = {
.driver = {
.name = "at25",
.owner = THIS_MODULE,
+ .of_match_table = at25_of_match,
},
.probe = at25_probe,
.remove = at25_remove,
diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c
index c169e07654c..33f8673d23a 100644
--- a/drivers/misc/eeprom/eeprom.c
+++ b/drivers/misc/eeprom/eeprom.c
@@ -3,7 +3,7 @@
* Philip Edelbrock <phil@netroedge.com>
* Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
* Copyright (C) 2003 IBM Corp.
- * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004 Jean Delvare <jdelvare@suse.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -17,7 +17,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index a6b5d5e7348..9ebeacdb8ec 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -11,7 +11,6 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
@@ -202,7 +201,7 @@ eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj,
edev = dev_get_drvdata(dev);
if (unlikely(off >= edev->bin.size))
- return 0;
+ return -EFBIG;
if ((off + count) > edev->bin.size)
count = edev->bin.size - off;
if (unlikely(!count))
@@ -363,7 +362,7 @@ static int eeprom_93xx46_probe(struct spi_device *spi)
dev_err(&spi->dev, "can't create erase interface\n");
}
- dev_set_drvdata(&spi->dev, edev);
+ spi_set_drvdata(spi, edev);
return 0;
fail:
kfree(edev);
@@ -372,13 +371,12 @@ fail:
static int eeprom_93xx46_remove(struct spi_device *spi)
{
- struct eeprom_93xx46_dev *edev = dev_get_drvdata(&spi->dev);
+ struct eeprom_93xx46_dev *edev = spi_get_drvdata(spi);
if (!(edev->pdata->flags & EE_READONLY))
device_remove_file(&spi->dev, &dev_attr_erase);
sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin);
- dev_set_drvdata(&spi->dev, NULL);
kfree(edev);
return 0;
}
diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
index e36157d5d3a..580ff9df552 100644
--- a/drivers/misc/eeprom/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -27,7 +27,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
diff --git a/drivers/misc/eeprom/sunxi_sid.c b/drivers/misc/eeprom/sunxi_sid.c
new file mode 100644
index 00000000000..3f2b625b203
--- /dev/null
+++ b/drivers/misc/eeprom/sunxi_sid.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://www.linux-sunxi.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This driver exposes the Allwinner security ID, efuses exported in byte-
+ * sized chunks.
+ */
+
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#define DRV_NAME "sunxi-sid"
+
+struct sunxi_sid_data {
+ void __iomem *reg_base;
+ unsigned int keysize;
+};
+
+/* We read the entire key, due to a 32 bit read alignment requirement. Since we
+ * want to return the requested byte, this results in somewhat slower code and
+ * uses 4 times more reads as needed but keeps code simpler. Since the SID is
+ * only very rarely probed, this is not really an issue.
+ */
+static u8 sunxi_sid_read_byte(const struct sunxi_sid_data *sid_data,
+ const unsigned int offset)
+{
+ u32 sid_key;
+
+ if (offset >= sid_data->keysize)
+ return 0;
+
+ sid_key = ioread32be(sid_data->reg_base + round_down(offset, 4));
+ sid_key >>= (offset % 4) * 8;
+
+ return sid_key; /* Only return the last byte */
+}
+
+static ssize_t sid_read(struct file *fd, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t pos, size_t size)
+{
+ struct platform_device *pdev;
+ struct sunxi_sid_data *sid_data;
+ int i;
+
+ pdev = to_platform_device(kobj_to_dev(kobj));
+ sid_data = platform_get_drvdata(pdev);
+
+ if (pos < 0 || pos >= sid_data->keysize)
+ return 0;
+ if (size > sid_data->keysize - pos)
+ size = sid_data->keysize - pos;
+
+ for (i = 0; i < size; i++)
+ buf[i] = sunxi_sid_read_byte(sid_data, pos + i);
+
+ return i;
+}
+
+static struct bin_attribute sid_bin_attr = {
+ .attr = { .name = "eeprom", .mode = S_IRUGO, },
+ .read = sid_read,
+};
+
+static int sunxi_sid_remove(struct platform_device *pdev)
+{
+ device_remove_bin_file(&pdev->dev, &sid_bin_attr);
+ dev_dbg(&pdev->dev, "driver unloaded\n");
+
+ return 0;
+}
+
+static const struct of_device_id sunxi_sid_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-sid", .data = (void *)16},
+ { .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512},
+ {/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
+
+static int sunxi_sid_probe(struct platform_device *pdev)
+{
+ struct sunxi_sid_data *sid_data;
+ struct resource *res;
+ const struct of_device_id *of_dev_id;
+ u8 *entropy;
+ unsigned int i;
+
+ sid_data = devm_kzalloc(&pdev->dev, sizeof(struct sunxi_sid_data),
+ GFP_KERNEL);
+ if (!sid_data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sid_data->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sid_data->reg_base))
+ return PTR_ERR(sid_data->reg_base);
+
+ of_dev_id = of_match_device(sunxi_sid_of_match, &pdev->dev);
+ if (!of_dev_id)
+ return -ENODEV;
+ sid_data->keysize = (int)of_dev_id->data;
+
+ platform_set_drvdata(pdev, sid_data);
+
+ sid_bin_attr.size = sid_data->keysize;
+ if (device_create_bin_file(&pdev->dev, &sid_bin_attr))
+ return -ENODEV;
+
+ entropy = kzalloc(sizeof(u8) * sid_data->keysize, GFP_KERNEL);
+ for (i = 0; i < sid_data->keysize; i++)
+ entropy[i] = sunxi_sid_read_byte(sid_data, i);
+ add_device_randomness(entropy, sid_data->keysize);
+ kfree(entropy);
+
+ dev_dbg(&pdev->dev, "loaded\n");
+
+ return 0;
+}
+
+static struct platform_driver sunxi_sid_driver = {
+ .probe = sunxi_sid_probe,
+ .remove = sunxi_sid_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = sunxi_sid_of_match,
+ },
+};
+module_platform_driver(sunxi_sid_driver);
+
+MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>");
+MODULE_DESCRIPTION("Allwinner sunxi security id driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 21:12:19 +0000