diff options
Diffstat (limited to 'drivers/misc/Kconfig')
| -rw-r--r-- | drivers/misc/Kconfig | 96 |
1 files changed, 58 insertions, 38 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 2661f6e366f..ee9402324a2 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -54,21 +54,13 @@ config AD525X_DPOT_SPI config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" depends on HAVE_CLK + depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help This option enables device driver support for the PWM channels on certain Atmel processors. Pulse Width Modulation is used for purposes including software controlled power-efficient backlights on LCD displays, motor control, and waveform generation. -config AB8500_PWM - bool "AB8500 PWM support" - depends on AB8500_CORE && ARCH_U8500 - select HAVE_PWM - help - This driver exports functions to enable/disble/config/free Pulse - Width Modulation in the Analog Baseband Chip AB8500. - It is used by led and backlight driver to control the intensity. - config ATMEL_TCLIB bool "Atmel AT32/AT91 Timer/Counter Library" depends on (AVR32 || ARCH_AT91) @@ -102,9 +94,17 @@ config ATMEL_TCB_CLKSRC_BLOCK TC can be used for other purposes, such as PWM generation and interval timing. +config DUMMY_IRQ + tristate "Dummy IRQ handler" + default n + ---help--- + This module accepts a single 'irq' parameter, which it should register for. + The sole purpose of this module is to help with debugging of systems on + which spurious IRQs would happen on disabled IRQ vector. + config IBM_ASM tristate "Device driver for IBM RSA service processor" - depends on X86 && PCI && INPUT && EXPERIMENTAL + depends on X86 && PCI && INPUT ---help--- This option enables device driver support for in-band access to the IBM RSA (Condor) service processor in eServer xSeries systems. @@ -136,7 +136,7 @@ config PHANTOM config INTEL_MID_PTI tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" - depends on PCI + depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST) default n help The PTI (Parallel Trace Interface) driver directs @@ -161,8 +161,8 @@ config SGI_IOC4 Otherwise say N. config TIFM_CORE - tristate "TI Flash Media interface support (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI + tristate "TI Flash Media interface support" + depends on PCI help If you want support for Texas Instruments(R) Flash Media adapters you should select this option and then also choose an appropriate @@ -177,8 +177,8 @@ config TIFM_CORE be called tifm_core. config TIFM_7XX1 - tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" - depends on PCI && TIFM_CORE && EXPERIMENTAL + tristate "TI Flash Media PCI74xx/PCI76xx host adapter support" + depends on PCI && TIFM_CORE default TIFM_CORE help This option enables support for Texas Instruments(R) PCI74xx and @@ -191,7 +191,7 @@ config TIFM_7XX1 config ICS932S401 tristate "Integrated Circuits ICS932S401" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Integrated Circuits ICS932S401 clock control chips. @@ -201,7 +201,7 @@ config ICS932S401 config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" - depends on AVR32 || ARCH_AT91 + depends on HAS_IOMEM && (AVR32 || ARCH_AT91 || COMPILE_TEST) ---help--- This option enables device driver support for Atmel Synchronized Serial Communication peripheral (SSC). @@ -236,7 +236,7 @@ config SGI_XP config CS5535_MFGPT tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" - depends on PCI && X86 && MFD_CS5535 + depends on MFD_CS5535 default n help This driver provides access to MFGPT functionality for other @@ -301,8 +301,8 @@ config SGI_GRU_DEBUG depends on SGI_GRU default n ---help--- - This option enables addition debugging code for the SGI GRU driver. If - you are unsure, say N. + This option enables additional debugging code for the SGI GRU driver. + If you are unsure, say N. config APDS9802ALS tristate "Medfield Avago APDS9802 ALS Sensor module" @@ -382,22 +382,9 @@ config HMC6352 This driver provides support for the Honeywell HMC6352 compass, providing configuration and heading data via sysfs. -config EP93XX_PWM - tristate "EP93xx PWM support" - depends on ARCH_EP93XX - help - This option enables device driver support for the PWM channels - on the Cirrus EP93xx processors. The EP9307 chip only has one - PWM channel all the others have two, the second channel is an - alternate function of the EGPIO14 pin. A sysfs interface is - provided to control the PWM channels. - - To compile this driver as a module, choose M here: the module will - be called ep93xx_pwm. - config DS1682 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Dallas Semiconductor DS1682 Total Elapsed Time Recorder. @@ -407,7 +394,7 @@ config DS1682 config SPEAR13XX_PCIE_GADGET bool "PCIe gadget support for SPEAr13XX platform" - depends on ARCH_SPEAR13XX + depends on ARCH_SPEAR13XX && BROKEN default n help This option enables gadget support for PCIe controller. If @@ -427,7 +414,7 @@ config TI_DAC7512 config VMWARE_BALLOON tristate "VMware Balloon Driver" - depends on X86 + depends on X86 && HYPERVISOR_GUEST help This is VMware physical memory management driver which acts like a "balloon" that can be inflated to reclaim physical pages @@ -481,7 +468,8 @@ config BMP085_SPI config PCH_PHUB tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" - depends on PCI + select GENERIC_NET_UTILS + depends on PCI && (X86_32 || COMPILE_TEST) help This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded @@ -508,13 +496,45 @@ config USB_SWITCH_FSA9480 stereo and mono audio, video, microphone and UART data to use a common connector port. +config LATTICE_ECP3_CONFIG + tristate "Lattice ECP3 FPGA bitstream configuration via SPI" + depends on SPI && SYSFS + select FW_LOADER + default n + help + This option enables support for bitstream configuration (programming + or loading) of the Lattice ECP3 FPGA family via SPI. + + If unsure, say N. + +config SRAM + bool "Generic on-chip SRAM driver" + depends on HAS_IOMEM + select GENERIC_ALLOCATOR + help + This driver allows you to declare a memory region to be managed by + the genalloc API. It is supposed to be used for small on-chip SRAM + areas found on many SoCs. + +config VEXPRESS_SYSCFG + bool "Versatile Express System Configuration driver" + depends on VEXPRESS_CONFIG + default y + help + ARM Ltd. Versatile Express uses specialised platform configuration + bus. System Configuration interface is one of the possible means + of generating transactions on this bus. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" -source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" source "drivers/misc/mei/Kconfig" +source "drivers/misc/vmw_vmci/Kconfig" +source "drivers/misc/mic/Kconfig" +source "drivers/misc/genwqe/Kconfig" +source "drivers/misc/echo/Kconfig" endmenu |