diff options
Diffstat (limited to 'drivers/misc/Kconfig')
| -rw-r--r-- | drivers/misc/Kconfig | 275 |
1 files changed, 227 insertions, 48 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 26386a92f5a..ee9402324a2 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -2,16 +2,13 @@ # Misc strange devices # -menuconfig MISC_DEVICES - bool "Misc devices" - default y - ---help--- - Say Y here to get to see options for device drivers from various - different categories. This option alone does not add any kernel code. +menu "Misc devices" - If you say N, all options in this submenu will be skipped and disabled. - -if MISC_DEVICES +config SENSORS_LIS3LV02D + tristate + depends on INPUT + select INPUT_POLLDEV + default n config AD525X_DPOT tristate "Analog Devices Digital Potentiometers" @@ -24,7 +21,8 @@ config AD525X_DPOT AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, - ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173 + ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, + AD5271, AD5272, AD5274 digital potentiometer chips. See Documentation/misc-devices/ad525x_dpot.txt for the @@ -55,7 +53,8 @@ config AD525X_DPOT_SPI config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" - depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 + depends on HAVE_CLK + depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help This option enables device driver support for the PWM channels on certain Atmel processors. Pulse Width Modulation is used for @@ -72,7 +71,7 @@ config ATMEL_TCLIB config ATMEL_TCB_CLKSRC bool "TC Block Clocksource" - depends on ATMEL_TCLIB && GENERIC_TIME + depends on ATMEL_TCLIB default y help Select this to get a high precision clocksource based on a @@ -95,9 +94,17 @@ config ATMEL_TCB_CLKSRC_BLOCK TC can be used for other purposes, such as PWM generation and interval timing. +config DUMMY_IRQ + tristate "Dummy IRQ handler" + default n + ---help--- + This module accepts a single 'irq' parameter, which it should register for. + The sole purpose of this module is to help with debugging of systems on + which spurious IRQs would happen on disabled IRQ vector. + config IBM_ASM tristate "Device driver for IBM RSA service processor" - depends on X86 && PCI && INPUT && EXPERIMENTAL + depends on X86 && PCI && INPUT ---help--- This option enables device driver support for in-band access to the IBM RSA (Condor) service processor in eServer xSeries systems. @@ -112,8 +119,8 @@ config IBM_ASM WARNING: This software may not be supported or function correctly on your IBM server. Please consult the IBM ServerProven - website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for - information on the specific driver level and support statement + website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> + for information on the specific driver level and support statement for your IBM server. config PHANTOM @@ -127,6 +134,20 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here. +config INTEL_MID_PTI + tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" + depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST) + default n + help + The PTI (Parallel Trace Interface) driver directs + trace data routed from various parts in the system out + through an Intel Penwell PTI port and out of the mobile + device for analysis with a debugging tool (Lauterbach or Fido). + + You should select this driver if the target kernel is meant for + an Intel Atom (non-netbook) mobile device containing a MIPI + P1149.7 standard implementation. + config SGI_IOC4 tristate "SGI IOC4 Base IO support" depends on PCI @@ -140,8 +161,8 @@ config SGI_IOC4 Otherwise say N. config TIFM_CORE - tristate "TI Flash Media interface support (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI + tristate "TI Flash Media interface support" + depends on PCI help If you want support for Texas Instruments(R) Flash Media adapters you should select this option and then also choose an appropriate @@ -156,8 +177,8 @@ config TIFM_CORE be called tifm_core. config TIFM_7XX1 - tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" - depends on PCI && TIFM_CORE && EXPERIMENTAL + tristate "TI Flash Media PCI74xx/PCI76xx host adapter support" + depends on PCI && TIFM_CORE default TIFM_CORE help This option enables support for Texas Instruments(R) PCI74xx and @@ -170,7 +191,7 @@ config TIFM_7XX1 config ICS932S401 tristate "Integrated Circuits ICS932S401" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Integrated Circuits ICS932S401 clock control chips. @@ -180,7 +201,7 @@ config ICS932S401 config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" - depends on AVR32 || ARCH_AT91 + depends on HAS_IOMEM && (AVR32 || ARCH_AT91 || COMPILE_TEST) ---help--- This option enables device driver support for Atmel Synchronized Serial Communication peripheral (SSC). @@ -215,8 +236,7 @@ config SGI_XP config CS5535_MFGPT tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" - depends on PCI - depends on X86 + depends on MFD_CS5535 default n help This driver provides access to MFGPT functionality for other @@ -240,7 +260,7 @@ config CS5535_MFGPT_DEFAULT_IRQ config CS5535_CLOCK_EVENT_SRC tristate "CS5535/CS5536 high-res timer (MFGPT) events" - depends on GENERIC_TIME && GENERIC_CLOCKEVENTS && CS5535_MFGPT + depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT help This driver provides a clock event source based on the MFGPT timer(s) in the CS5535 and CS5536 companion chips. @@ -248,15 +268,15 @@ config CS5535_CLOCK_EVENT_SRC generic PIT, and are suitable for use as high-res timers. config HP_ILO - tristate "Channel interface driver for HP iLO/iLO2 processor" + tristate "Channel interface driver for the HP iLO processor" depends on PCI default n help The channel interface driver allows applications to communicate - with iLO/iLO2 management processors present on HP ProLiant - servers. Upon loading, the driver creates /dev/hpilo/dXccbN files, - which can be used to gather data from the management processor, - via read and write system calls. + with iLO management processors present on HP ProLiant servers. + Upon loading, the driver creates /dev/hpilo/dXccbN files, which + can be used to gather data from the management processor, via + read and write system calls. To compile this driver as a module, choose M here: the module will be called hpilo. @@ -281,8 +301,18 @@ config SGI_GRU_DEBUG depends on SGI_GRU default n ---help--- - This option enables addition debugging code for the SGI GRU driver. If - you are unsure, say N. + This option enables additional debugging code for the SGI GRU driver. + If you are unsure, say N. + +config APDS9802ALS + tristate "Medfield Avago APDS9802 ALS Sensor module" + depends on I2C + help + If you say yes here you get support for the ALS APDS9802 ambient + light sensor. + + This driver can also be built as a module. If so, the module + will be called apds9802als. config ISL29003 tristate "Intersil ISL29003 ambient light sensor" @@ -294,6 +324,16 @@ config ISL29003 This driver can also be built as a module. If so, the module will be called isl29003. +config ISL29020 + tristate "Intersil ISL29020 ambient light sensor" + depends on I2C + help + If you say yes here you get support for the Intersil ISL29020 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called isl29020. + config SENSORS_TSL2550 tristate "Taos TSL2550 ambient light sensor" depends on I2C && SYSFS @@ -304,22 +344,47 @@ config SENSORS_TSL2550 This driver can also be built as a module. If so, the module will be called tsl2550. -config EP93XX_PWM - tristate "EP93xx PWM support" - depends on ARCH_EP93XX +config SENSORS_BH1780 + tristate "ROHM BH1780GLI ambient light sensor" + depends on I2C && SYSFS help - This option enables device driver support for the PWM channels - on the Cirrus EP93xx processors. The EP9307 chip only has one - PWM channel all the others have two, the second channel is an - alternate function of the EGPIO14 pin. A sysfs interface is - provided to control the PWM channels. + If you say yes here you get support for the ROHM BH1780GLI + ambient light sensor. - To compile this driver as a module, choose M here: the module will - be called ep93xx_pwm. + This driver can also be built as a module. If so, the module + will be called bh1780gli. + +config SENSORS_BH1770 + tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" + depends on I2C + ---help--- + Say Y here if you want to build a driver for BH1770GLC (ROHM) or + SFH7770 (Osram) combined ambient light and proximity sensor chip. + + To compile this driver as a module, choose M here: the + module will be called bh1770glc. If unsure, say N here. + +config SENSORS_APDS990X + tristate "APDS990X combined als and proximity sensors" + depends on I2C + default n + ---help--- + Say Y here if you want to build a driver for Avago APDS990x + combined ambient light and proximity sensor chip. + + To compile this driver as a module, choose M here: the + module will be called apds990x. If unsure, say N here. + +config HMC6352 + tristate "Honeywell HMC6352 compass" + depends on I2C + help + This driver provides support for the Honeywell HMC6352 compass, + providing configuration and heading data via sysfs. config DS1682 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Dallas Semiconductor DS1682 Total Elapsed Time Recorder. @@ -327,6 +392,16 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. +config SPEAR13XX_PCIE_GADGET + bool "PCIe gadget support for SPEAr13XX platform" + depends on ARCH_SPEAR13XX && BROKEN + default n + help + This option enables gadget support for PCIe controller. If + board file defines any controller as PCIe endpoint then a sysfs + entry will be created for that controller. User can use these + sysfs node to configure PCIe EP as per his requirements. + config TI_DAC7512 tristate "Texas Instruments DAC7512" depends on SPI && SYSFS @@ -335,11 +410,11 @@ config TI_DAC7512 DAC7512 16-bit digital-to-analog converter. This driver can also be built as a module. If so, the module - will be calles ti_dac7512. + will be called ti_dac7512. config VMWARE_BALLOON tristate "VMware Balloon Driver" - depends on X86 + depends on X86 && HYPERVISOR_GUEST help This is VMware physical memory management driver which acts like a "balloon" that can be inflated to reclaim physical pages @@ -351,11 +426,115 @@ config VMWARE_BALLOON If unsure, say N. To compile this driver as a module, choose M here: the - module will be called vmware_balloon. + module will be called vmw_balloon. + +config ARM_CHARLCD + bool "ARM Ltd. Character LCD Driver" + depends on PLAT_VERSATILE + help + This is a driver for the character LCD found on the ARM Ltd. + Versatile and RealView Platform Baseboards. It doesn't do + very much more than display the text "ARM Linux" on the first + line and the Linux version on the second line, but that's + still useful. + +config BMP085 + bool + depends on SYSFS + +config BMP085_I2C + tristate "BMP085 digital pressure sensor on I2C" + select BMP085 + select REGMAP_I2C + depends on I2C && SYSFS + help + Say Y here if you want to support Bosch Sensortec's digital pressure + sensor hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called bmp085-i2c. + +config BMP085_SPI + tristate "BMP085 digital pressure sensor on SPI" + select BMP085 + select REGMAP_SPI + depends on SPI_MASTER && SYSFS + help + Say Y here if you want to support Bosch Sensortec's digital pressure + sensor hooked to an SPI bus. + + To compile this driver as a module, choose M here: the + module will be called bmp085-spi. + +config PCH_PHUB + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" + select GENERIC_NET_UTILS + depends on PCI && (X86_32 || COMPILE_TEST) + help + This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of + Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded + processor. The Topcliff has MAC address and Option ROM data in SROM. + This driver can access MAC address and Option ROM data in SROM. + + This driver also can be used for LAPIS Semiconductor's IOH, + ML7213/ML7223/ML7831. + ML7213 which is for IVI(In-Vehicle Infotainment) use. + ML7223 IOH is for MP(Media Phone) use. + ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. + + To compile this driver as a module, choose M here: the module will + be called pch_phub. + +config USB_SWITCH_FSA9480 + tristate "FSA9480 USB Switch" + depends on I2C + help + The FSA9480 is a USB port accessory detector and switch. + The FSA9480 is fully controlled using I2C and enables USB data, + stereo and mono audio, video, microphone and UART data to use + a common connector port. + +config LATTICE_ECP3_CONFIG + tristate "Lattice ECP3 FPGA bitstream configuration via SPI" + depends on SPI && SYSFS + select FW_LOADER + default n + help + This option enables support for bitstream configuration (programming + or loading) of the Lattice ECP3 FPGA family via SPI. + + If unsure, say N. + +config SRAM + bool "Generic on-chip SRAM driver" + depends on HAS_IOMEM + select GENERIC_ALLOCATOR + help + This driver allows you to declare a memory region to be managed by + the genalloc API. It is supposed to be used for small on-chip SRAM + areas found on many SoCs. + +config VEXPRESS_SYSCFG + bool "Versatile Express System Configuration driver" + depends on VEXPRESS_CONFIG + default y + help + ARM Ltd. Versatile Express uses specialised platform configuration + bus. System Configuration interface is one of the possible means + of generating transactions on this bus. source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" -source "drivers/misc/iwmc3200top/Kconfig" - -endif # MISC_DEVICES +source "drivers/misc/ti-st/Kconfig" +source "drivers/misc/lis3lv02d/Kconfig" +source "drivers/misc/carma/Kconfig" +source "drivers/misc/altera-stapl/Kconfig" +source "drivers/misc/mei/Kconfig" +source "drivers/misc/vmw_vmci/Kconfig" +source "drivers/misc/mic/Kconfig" +source "drivers/misc/genwqe/Kconfig" +source "drivers/misc/echo/Kconfig" +endmenu |