diff options
Diffstat (limited to 'drivers/misc/Kconfig')
| -rw-r--r-- | drivers/misc/Kconfig | 72 |
1 files changed, 51 insertions, 21 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b151b7c1bd5..ee9402324a2 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -54,6 +54,7 @@ config AD525X_DPOT_SPI config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" depends on HAVE_CLK + depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help This option enables device driver support for the PWM channels on certain Atmel processors. Pulse Width Modulation is used for @@ -93,6 +94,14 @@ config ATMEL_TCB_CLKSRC_BLOCK TC can be used for other purposes, such as PWM generation and interval timing. +config DUMMY_IRQ + tristate "Dummy IRQ handler" + default n + ---help--- + This module accepts a single 'irq' parameter, which it should register for. + The sole purpose of this module is to help with debugging of systems on + which spurious IRQs would happen on disabled IRQ vector. + config IBM_ASM tristate "Device driver for IBM RSA service processor" depends on X86 && PCI && INPUT @@ -127,7 +136,7 @@ config PHANTOM config INTEL_MID_PTI tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" - depends on PCI + depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST) default n help The PTI (Parallel Trace Interface) driver directs @@ -192,7 +201,7 @@ config ICS932S401 config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" - depends on AVR32 || ARCH_AT91 + depends on HAS_IOMEM && (AVR32 || ARCH_AT91 || COMPILE_TEST) ---help--- This option enables device driver support for Atmel Synchronized Serial Communication peripheral (SSC). @@ -227,7 +236,7 @@ config SGI_XP config CS5535_MFGPT tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" - depends on PCI && X86 && MFD_CS5535 + depends on MFD_CS5535 default n help This driver provides access to MFGPT functionality for other @@ -292,8 +301,8 @@ config SGI_GRU_DEBUG depends on SGI_GRU default n ---help--- - This option enables addition debugging code for the SGI GRU driver. If - you are unsure, say N. + This option enables additional debugging code for the SGI GRU driver. + If you are unsure, say N. config APDS9802ALS tristate "Medfield Avago APDS9802 ALS Sensor module" @@ -373,19 +382,6 @@ config HMC6352 This driver provides support for the Honeywell HMC6352 compass, providing configuration and heading data via sysfs. -config EP93XX_PWM - tristate "EP93xx PWM support" - depends on ARCH_EP93XX - help - This option enables device driver support for the PWM channels - on the Cirrus EP93xx processors. The EP9307 chip only has one - PWM channel all the others have two, the second channel is an - alternate function of the EGPIO14 pin. A sysfs interface is - provided to control the PWM channels. - - To compile this driver as a module, choose M here: the module will - be called ep93xx_pwm. - config DS1682 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" depends on I2C @@ -398,7 +394,7 @@ config DS1682 config SPEAR13XX_PCIE_GADGET bool "PCIe gadget support for SPEAr13XX platform" - depends on ARCH_SPEAR13XX + depends on ARCH_SPEAR13XX && BROKEN default n help This option enables gadget support for PCIe controller. If @@ -418,7 +414,7 @@ config TI_DAC7512 config VMWARE_BALLOON tristate "VMware Balloon Driver" - depends on X86 + depends on X86 && HYPERVISOR_GUEST help This is VMware physical memory management driver which acts like a "balloon" that can be inflated to reclaim physical pages @@ -472,7 +468,8 @@ config BMP085_SPI config PCH_PHUB tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" - depends on PCI + select GENERIC_NET_UTILS + depends on PCI && (X86_32 || COMPILE_TEST) help This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded @@ -499,6 +496,35 @@ config USB_SWITCH_FSA9480 stereo and mono audio, video, microphone and UART data to use a common connector port. +config LATTICE_ECP3_CONFIG + tristate "Lattice ECP3 FPGA bitstream configuration via SPI" + depends on SPI && SYSFS + select FW_LOADER + default n + help + This option enables support for bitstream configuration (programming + or loading) of the Lattice ECP3 FPGA family via SPI. + + If unsure, say N. + +config SRAM + bool "Generic on-chip SRAM driver" + depends on HAS_IOMEM + select GENERIC_ALLOCATOR + help + This driver allows you to declare a memory region to be managed by + the genalloc API. It is supposed to be used for small on-chip SRAM + areas found on many SoCs. + +config VEXPRESS_SYSCFG + bool "Versatile Express System Configuration driver" + depends on VEXPRESS_CONFIG + default y + help + ARM Ltd. Versatile Express uses specialised platform configuration + bus. System Configuration interface is one of the possible means + of generating transactions on this bus. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" @@ -507,4 +533,8 @@ source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" source "drivers/misc/mei/Kconfig" +source "drivers/misc/vmw_vmci/Kconfig" +source "drivers/misc/mic/Kconfig" +source "drivers/misc/genwqe/Kconfig" +source "drivers/misc/echo/Kconfig" endmenu |