1 files changed, 144 insertions, 191 deletions

diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 1e321d34977..e6fab94e2c8 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -19,6 +19,9 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/mfd/core.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -30,85 +33,7 @@
 
 #include "wm8994.h"
 
-/**
- * wm8994_reg_read: Read a single WM8994 register.
- *
- * @wm8994: Device to read from.
- * @reg: Register to read.
- */
-int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
-{
-	unsigned int val;
-	int ret;
-
-	ret = regmap_read(wm8994->regmap, reg, &val);
-
-	if (ret < 0)
-		return ret;
-	else
-		return val;
-}
-EXPORT_SYMBOL_GPL(wm8994_reg_read);
-
-/**
- * wm8994_bulk_read: Read multiple WM8994 registers
- *
- * @wm8994: Device to read from
- * @reg: First register
- * @count: Number of registers
- * @buf: Buffer to fill.  The data will be returned big endian.
- */
-int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
-		     int count, u16 *buf)
-{
-	return regmap_bulk_read(wm8994->regmap, reg, buf, count);
-}
-
-/**
- * wm8994_reg_write: Write a single WM8994 register.
- *
- * @wm8994: Device to write to.
- * @reg: Register to write to.
- * @val: Value to write.
- */
-int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
-		     unsigned short val)
-{
-	return regmap_write(wm8994->regmap, reg, val);
-}
-EXPORT_SYMBOL_GPL(wm8994_reg_write);
-
-/**
- * wm8994_bulk_write: Write multiple WM8994 registers
- *
- * @wm8994: Device to write to
- * @reg: First register
- * @count: Number of registers
- * @buf: Buffer to write from.  Data must be big-endian formatted.
- */
-int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
-		      int count, const u16 *buf)
-{
-	return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16));
-}
-EXPORT_SYMBOL_GPL(wm8994_bulk_write);
-
-/**
- * wm8994_set_bits: Set the value of a bitfield in a WM8994 register
- *
- * @wm8994: Device to write to.
- * @reg: Register to write to.
- * @mask: Mask of bits to set.
- * @val: Value to set (unshifted)
- */
-int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
-		    unsigned short mask, unsigned short val)
-{
-	return regmap_update_bits(wm8994->regmap, reg, mask, val);
-}
-EXPORT_SYMBOL_GPL(wm8994_set_bits);
-
-static struct mfd_cell wm8994_regulator_devs[] = {
+static const struct mfd_cell wm8994_regulator_devs[] = {
 	{
 		.name = "wm8994-ldo",
 		.id = 1,
@@ -137,7 +62,7 @@ static struct resource wm8994_gpio_resources[] = {
 	},
 };
 
-static struct mfd_cell wm8994_devs[] = {
+static const struct mfd_cell wm8994_devs[] = {
 	{
 		.name = "wm8994-codec",
 		.num_resources = ARRAY_SIZE(wm8994_codec_resources),
@@ -191,42 +116,14 @@ static const char *wm8958_main_supplies[] = {
 	"SPKVDD2",
 };
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_RUNTIME
 static int wm8994_suspend(struct device *dev)
 {
 	struct wm8994 *wm8994 = dev_get_drvdata(dev);
 	int ret;
 
 	/* Don't actually go through with the suspend if the CODEC is
-	 * still active (eg, for audio passthrough from CP. */
-	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1);
-	if (ret < 0) {
-		dev_err(dev, "Failed to read power status: %d\n", ret);
-	} else if (ret & WM8994_VMID_SEL_MASK) {
-		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
-		return 0;
-	}
-
-	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4);
-	if (ret < 0) {
-		dev_err(dev, "Failed to read power status: %d\n", ret);
-	} else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA |
-			  WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA |
-			  WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) {
-		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
-		return 0;
-	}
-
-	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5);
-	if (ret < 0) {
-		dev_err(dev, "Failed to read power status: %d\n", ret);
-	} else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
-			  WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA |
-			  WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) {
-		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
-		return 0;
-	}
-
+	 * still active for accessory detect. */
 	switch (wm8994->type) {
 	case WM8958:
 	case WM1811:
@@ -242,34 +139,6 @@ static int wm8994_suspend(struct device *dev)
 		break;
 	}
 
-	switch (wm8994->type) {
-	case WM1811:
-		ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
-		if (ret < 0) {
-			dev_err(dev, "Failed to read jackdet: %d\n", ret);
-		} else if (ret & WM1811_JACKDET_MODE_MASK) {
-			dev_dbg(dev, "CODEC still active, ignoring suspend\n");
-			return 0;
-		}
-		break;
-	default:
-		break;
-	}
-
-	switch (wm8994->type) {
-	case WM1811:
-		ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
-		if (ret < 0) {
-			dev_err(dev, "Failed to read jackdet: %d\n", ret);
-		} else if (ret & WM1811_JACKDET_MODE_MASK) {
-			dev_dbg(dev, "CODEC still active, ignoring suspend\n");
-			return 0;
-		}
-		break;
-	default:
-		break;
-	}
-
 	/* Disable LDO pulldowns while the device is suspended if we
 	 * don't know that something will be driving them. */
 	if (!wm8994->ldo_ena_always_driven)
@@ -283,9 +152,24 @@ static int wm8994_suspend(struct device *dev)
 	wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
 			 wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
 
-	regcache_cache_only(wm8994->regmap, true);
 	regcache_mark_dirty(wm8994->regmap);
 
+	/* Restore GPIO registers to prevent problems with mismatched
+	 * pin configurations.
+	 */
+	ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1,
+				   WM8994_GPIO_11);
+	if (ret != 0)
+		dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
+
+	/* In case one of the GPIOs is used as a wake input. */
+	ret = regcache_sync_region(wm8994->regmap,
+				   WM8994_INTERRUPT_STATUS_1_MASK,
+				   WM8994_INTERRUPT_STATUS_1_MASK);
+	if (ret != 0)
+		dev_err(dev, "Failed to restore interrupt mask: %d\n", ret);
+
+	regcache_cache_only(wm8994->regmap, true);
 	wm8994->suspended = true;
 
 	ret = regulator_bulk_disable(wm8994->num_supplies,
@@ -359,47 +243,111 @@ static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
 }
 #endif
 
-static const __devinitdata struct reg_default wm8994_revc_patch[] = {
+static const struct reg_default wm8994_revc_patch[] = {
 	{ 0x102, 0x3 },
 	{ 0x56, 0x3 },
 	{ 0x817, 0x0 },
 	{ 0x102, 0x0 },
 };
 
-static const __devinitdata struct reg_default wm8958_reva_patch[] = {
+static const struct reg_default wm8958_reva_patch[] = {
 	{ 0x102, 0x3 },
 	{ 0xcb, 0x81 },
 	{ 0x817, 0x0 },
 	{ 0x102, 0x0 },
 };
 
-static const __devinitdata struct reg_default wm1811_reva_patch[] = {
+static const struct reg_default wm1811_reva_patch[] = {
 	{ 0x102, 0x3 },
-	{ 0x56, 0x7 },
+	{ 0x56, 0xc07 },
 	{ 0x5d, 0x7e },
 	{ 0x5e, 0x0 },
 	{ 0x102, 0x0 },
 };
 
+#ifdef CONFIG_OF
+static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
+{
+	struct device_node *np = wm8994->dev->of_node;
+	struct wm8994_pdata *pdata = &wm8994->pdata;
+	int i;
+
+	if (!np)
+		return 0;
+
+	if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults,
+				       ARRAY_SIZE(pdata->gpio_defaults)) >= 0) {
+		for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
+			if (wm8994->pdata.gpio_defaults[i] == 0)
+				pdata->gpio_defaults[i]
+					= WM8994_CONFIGURE_GPIO;
+		}
+	}
+
+	of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias,
+				   ARRAY_SIZE(pdata->micbias));
+
+	pdata->lineout1_diff = true;
+	pdata->lineout2_diff = true;
+	if (of_find_property(np, "wlf,lineout1-se", NULL))
+		pdata->lineout1_diff = false;
+	if (of_find_property(np, "wlf,lineout2-se", NULL))
+		pdata->lineout2_diff = false;
+
+	if (of_find_property(np, "wlf,lineout1-feedback", NULL))
+		pdata->lineout1fb = true;
+	if (of_find_property(np, "wlf,lineout2-feedback", NULL))
+		pdata->lineout2fb = true;
+
+	if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
+		pdata->lineout2fb = true;
+
+	pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0);
+	if (pdata->ldo[0].enable < 0)
+		pdata->ldo[0].enable = 0;
+
+	pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0);
+	if (pdata->ldo[1].enable < 0)
+		pdata->ldo[1].enable = 0;
+
+	return 0;
+}
+#else
+static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
+{
+	return 0;
+}
+#endif
+
 /*
  * Instantiate the generic non-control parts of the device.
  */
-static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
+static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 {
-	struct wm8994_pdata *pdata = wm8994->dev->platform_data;
+	struct wm8994_pdata *pdata;
 	struct regmap_config *regmap_config;
 	const struct reg_default *regmap_patch = NULL;
 	const char *devname;
-	int ret, i, patch_regs;
+	int ret, i, patch_regs = 0;
 	int pulls = 0;
 
+	if (dev_get_platdata(wm8994->dev)) {
+		pdata = dev_get_platdata(wm8994->dev);
+		wm8994->pdata = *pdata;
+	}
+	pdata = &wm8994->pdata;
+
+	ret = wm8994_set_pdata_from_of(wm8994);
+	if (ret != 0)
+		return ret;
+
 	dev_set_drvdata(wm8994->dev, wm8994);
 
 	/* Add the on-chip regulators first for bootstrapping */
 	ret = mfd_add_devices(wm8994->dev, -1,
 			      wm8994_regulator_devs,
 			      ARRAY_SIZE(wm8994_regulator_devs),
-			      NULL, 0);
+			      NULL, 0, NULL);
 	if (ret != 0) {
 		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
 		goto err;
@@ -446,7 +394,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		goto err;
 	}
 		
-	ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
+	ret = devm_regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
 				 wm8994->supplies);
 	if (ret != 0) {
 		dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
@@ -457,7 +405,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
 				    wm8994->supplies);
 	if (ret != 0) {
 		dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
-		goto err_get;
+		goto err;
 	}
 
 	ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
@@ -514,11 +462,10 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
 			break;
 		case 2:
 		case 3:
+		default:
 			regmap_patch = wm8994_revc_patch;
 			patch_regs = ARRAY_SIZE(wm8994_revc_patch);
 			break;
-		default:
-			break;
 		}
 		break;
 
@@ -537,17 +484,9 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		/* Revision C did not change the relevant layer */
 		if (wm8994->revision > 1)
 			wm8994->revision++;
-		switch (wm8994->revision) {
-		case 0:
-		case 1:
-		case 2:
-		case 3:
-			regmap_patch = wm1811_reva_patch;
-			patch_regs = ARRAY_SIZE(wm1811_reva_patch);
-			break;
-		default:
-			break;
-		}
+
+		regmap_patch = wm1811_reva_patch;
+		patch_regs = ARRAY_SIZE(wm1811_reva_patch);
 		break;
 
 	default:
@@ -579,6 +518,17 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		return ret;
 	}
 
+	/* Explicitly put the device into reset in case regulators
+	 * don't get disabled in order to ensure we know the device
+	 * state.
+	 */
+	ret = wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
+			       wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
+	if (ret != 0) {
+		dev_err(wm8994->dev, "Failed to reset device: %d\n", ret);
+		return ret;
+	}
+
 	if (regmap_patch) {
 		ret = regmap_register_patch(wm8994->regmap, regmap_patch,
 					    patch_regs);
@@ -589,24 +539,21 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		}
 	}
 
-	if (pdata) {
-		wm8994->irq_base = pdata->irq_base;
-		wm8994->gpio_base = pdata->gpio_base;
+	wm8994->irq_base = pdata->irq_base;
+	wm8994->gpio_base = pdata->gpio_base;
 
-		/* GPIO configuration is only applied if it's non-zero */
-		for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
-			if (pdata->gpio_defaults[i]) {
-				wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
-						0xffff,
-						pdata->gpio_defaults[i]);
-			}
+	/* GPIO configuration is only applied if it's non-zero */
+	for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
+		if (pdata->gpio_defaults[i]) {
+			wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
+					0xffff, pdata->gpio_defaults[i]);
 		}
+	}
 
-		wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
+	wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
 
-		if (pdata->spkmode_pu)
-			pulls |= WM8994_SPKMODE_PU;
-	}
+	if (pdata->spkmode_pu)
+		pulls |= WM8994_SPKMODE_PU;
 
 	/* Disable unneeded pulls */
 	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
@@ -633,7 +580,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
 
 	ret = mfd_add_devices(wm8994->dev, -1,
 			      wm8994_devs, ARRAY_SIZE(wm8994_devs),
-			      NULL, 0);
+			      NULL, 0, NULL);
 	if (ret != 0) {
 		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
 		goto err_irq;
@@ -649,34 +596,32 @@ err_irq:
 err_enable:
 	regulator_bulk_disable(wm8994->num_supplies,
 			       wm8994->supplies);
-err_get:
-	regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
 err:
 	mfd_remove_devices(wm8994->dev);
 	return ret;
 }
 
-static __devexit void wm8994_device_exit(struct wm8994 *wm8994)
+static void wm8994_device_exit(struct wm8994 *wm8994)
 {
 	pm_runtime_disable(wm8994->dev);
 	mfd_remove_devices(wm8994->dev);
 	wm8994_irq_exit(wm8994);
 	regulator_bulk_disable(wm8994->num_supplies,
 			       wm8994->supplies);
-	regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
 }
 
 static const struct of_device_id wm8994_of_match[] = {
-	{ .compatible = "wlf,wm1811", },
-	{ .compatible = "wlf,wm8994", },
-	{ .compatible = "wlf,wm8958", },
+	{ .compatible = "wlf,wm1811", .data = (void *)WM1811 },
+	{ .compatible = "wlf,wm8994", .data = (void *)WM8994 },
+	{ .compatible = "wlf,wm8958", .data = (void *)WM8958 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, wm8994_of_match);
 
-static __devinit int wm8994_i2c_probe(struct i2c_client *i2c,
+static int wm8994_i2c_probe(struct i2c_client *i2c,
 				      const struct i2c_device_id *id)
 {
+	const struct of_device_id *of_id;
 	struct wm8994 *wm8994;
 	int ret;
 
@@ -687,7 +632,14 @@ static __devinit int wm8994_i2c_probe(struct i2c_client *i2c,
 	i2c_set_clientdata(i2c, wm8994);
 	wm8994->dev = &i2c->dev;
 	wm8994->irq = i2c->irq;
-	wm8994->type = id->driver_data;
+
+	if (i2c->dev.of_node) {
+		of_id = of_match_device(wm8994_of_match, &i2c->dev);
+		if (of_id)
+			wm8994->type = (enum wm8994_type)of_id->data;
+	} else {
+		wm8994->type = id->driver_data;
+	}
 
 	wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
 	if (IS_ERR(wm8994->regmap)) {
@@ -700,7 +652,7 @@ static __devinit int wm8994_i2c_probe(struct i2c_client *i2c,
 	return wm8994_device_init(wm8994, i2c->irq);
 }
 
-static __devexit int wm8994_i2c_remove(struct i2c_client *i2c)
+static int wm8994_i2c_remove(struct i2c_client *i2c)
 {
 	struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
 
@@ -718,18 +670,19 @@ static const struct i2c_device_id wm8994_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
 
-static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume,
-			    NULL);
+static const struct dev_pm_ops wm8994_pm_ops = {
+	SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL)
+};
 
 static struct i2c_driver wm8994_i2c_driver = {
 	.driver = {
 		.name = "wm8994",
 		.owner = THIS_MODULE,
 		.pm = &wm8994_pm_ops,
-		.of_match_table = wm8994_of_match,
+		.of_match_table = of_match_ptr(wm8994_of_match),
 	},
 	.probe = wm8994_i2c_probe,
-	.remove = __devexit_p(wm8994_i2c_remove),
+	.remove = wm8994_i2c_remove,
 	.id_table = wm8994_i2c_id,
 };