diff options
Diffstat (limited to 'drivers/mfd/wm8994-core.c')
| -rw-r--r-- | drivers/mfd/wm8994-core.c | 382 |
1 files changed, 197 insertions, 185 deletions
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index f117e7fb932..e6fab94e2c8 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -19,6 +19,9 @@ #include <linux/err.h> #include <linux/delay.h> #include <linux/mfd/core.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> @@ -30,85 +33,7 @@ #include "wm8994.h" -/** - * wm8994_reg_read: Read a single WM8994 register. - * - * @wm8994: Device to read from. - * @reg: Register to read. - */ -int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg) -{ - unsigned int val; - int ret; - - ret = regmap_read(wm8994->regmap, reg, &val); - - if (ret < 0) - return ret; - else - return val; -} -EXPORT_SYMBOL_GPL(wm8994_reg_read); - -/** - * wm8994_bulk_read: Read multiple WM8994 registers - * - * @wm8994: Device to read from - * @reg: First register - * @count: Number of registers - * @buf: Buffer to fill. The data will be returned big endian. - */ -int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg, - int count, u16 *buf) -{ - return regmap_bulk_read(wm8994->regmap, reg, buf, count); -} - -/** - * wm8994_reg_write: Write a single WM8994 register. - * - * @wm8994: Device to write to. - * @reg: Register to write to. - * @val: Value to write. - */ -int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg, - unsigned short val) -{ - return regmap_write(wm8994->regmap, reg, val); -} -EXPORT_SYMBOL_GPL(wm8994_reg_write); - -/** - * wm8994_bulk_write: Write multiple WM8994 registers - * - * @wm8994: Device to write to - * @reg: First register - * @count: Number of registers - * @buf: Buffer to write from. Data must be big-endian formatted. - */ -int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg, - int count, const u16 *buf) -{ - return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16)); -} -EXPORT_SYMBOL_GPL(wm8994_bulk_write); - -/** - * wm8994_set_bits: Set the value of a bitfield in a WM8994 register - * - * @wm8994: Device to write to. - * @reg: Register to write to. - * @mask: Mask of bits to set. - * @val: Value to set (unshifted) - */ -int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg, - unsigned short mask, unsigned short val) -{ - return regmap_update_bits(wm8994->regmap, reg, mask, val); -} -EXPORT_SYMBOL_GPL(wm8994_set_bits); - -static struct mfd_cell wm8994_regulator_devs[] = { +static const struct mfd_cell wm8994_regulator_devs[] = { { .name = "wm8994-ldo", .id = 1, @@ -137,7 +62,7 @@ static struct resource wm8994_gpio_resources[] = { }, }; -static struct mfd_cell wm8994_devs[] = { +static const struct mfd_cell wm8994_devs[] = { { .name = "wm8994-codec", .num_resources = ARRAY_SIZE(wm8994_codec_resources), @@ -191,42 +116,14 @@ static const char *wm8958_main_supplies[] = { "SPKVDD2", }; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_RUNTIME static int wm8994_suspend(struct device *dev) { struct wm8994 *wm8994 = dev_get_drvdata(dev); int ret; /* Don't actually go through with the suspend if the CODEC is - * still active (eg, for audio passthrough from CP. */ - ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1); - if (ret < 0) { - dev_err(dev, "Failed to read power status: %d\n", ret); - } else if (ret & WM8994_VMID_SEL_MASK) { - dev_dbg(dev, "CODEC still active, ignoring suspend\n"); - return 0; - } - - ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4); - if (ret < 0) { - dev_err(dev, "Failed to read power status: %d\n", ret); - } else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA | - WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA | - WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) { - dev_dbg(dev, "CODEC still active, ignoring suspend\n"); - return 0; - } - - ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5); - if (ret < 0) { - dev_err(dev, "Failed to read power status: %d\n", ret); - } else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | - WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA | - WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) { - dev_dbg(dev, "CODEC still active, ignoring suspend\n"); - return 0; - } - + * still active for accessory detect. */ switch (wm8994->type) { case WM8958: case WM1811: @@ -242,20 +139,6 @@ static int wm8994_suspend(struct device *dev) break; } - switch (wm8994->type) { - case WM1811: - ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2); - if (ret < 0) { - dev_err(dev, "Failed to read jackdet: %d\n", ret); - } else if (ret & WM1811_JACKDET_MODE_MASK) { - dev_dbg(dev, "CODEC still active, ignoring suspend\n"); - return 0; - } - break; - default: - break; - } - /* Disable LDO pulldowns while the device is suspended if we * don't know that something will be driving them. */ if (!wm8994->ldo_ena_always_driven) @@ -269,9 +152,24 @@ static int wm8994_suspend(struct device *dev) wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET)); - regcache_cache_only(wm8994->regmap, true); regcache_mark_dirty(wm8994->regmap); + /* Restore GPIO registers to prevent problems with mismatched + * pin configurations. + */ + ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1, + WM8994_GPIO_11); + if (ret != 0) + dev_err(dev, "Failed to restore GPIO registers: %d\n", ret); + + /* In case one of the GPIOs is used as a wake input. */ + ret = regcache_sync_region(wm8994->regmap, + WM8994_INTERRUPT_STATUS_1_MASK, + WM8994_INTERRUPT_STATUS_1_MASK); + if (ret != 0) + dev_err(dev, "Failed to restore interrupt mask: %d\n", ret); + + regcache_cache_only(wm8994->regmap, true); wm8994->suspended = true; ret = regulator_bulk_disable(wm8994->num_supplies, @@ -345,27 +243,114 @@ static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) } #endif +static const struct reg_default wm8994_revc_patch[] = { + { 0x102, 0x3 }, + { 0x56, 0x3 }, + { 0x817, 0x0 }, + { 0x102, 0x0 }, +}; + +static const struct reg_default wm8958_reva_patch[] = { + { 0x102, 0x3 }, + { 0xcb, 0x81 }, + { 0x817, 0x0 }, + { 0x102, 0x0 }, +}; + +static const struct reg_default wm1811_reva_patch[] = { + { 0x102, 0x3 }, + { 0x56, 0xc07 }, + { 0x5d, 0x7e }, + { 0x5e, 0x0 }, + { 0x102, 0x0 }, +}; + +#ifdef CONFIG_OF +static int wm8994_set_pdata_from_of(struct wm8994 *wm8994) +{ + struct device_node *np = wm8994->dev->of_node; + struct wm8994_pdata *pdata = &wm8994->pdata; + int i; + + if (!np) + return 0; + + if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults, + ARRAY_SIZE(pdata->gpio_defaults)) >= 0) { + for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { + if (wm8994->pdata.gpio_defaults[i] == 0) + pdata->gpio_defaults[i] + = WM8994_CONFIGURE_GPIO; + } + } + + of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias, + ARRAY_SIZE(pdata->micbias)); + + pdata->lineout1_diff = true; + pdata->lineout2_diff = true; + if (of_find_property(np, "wlf,lineout1-se", NULL)) + pdata->lineout1_diff = false; + if (of_find_property(np, "wlf,lineout2-se", NULL)) + pdata->lineout2_diff = false; + + if (of_find_property(np, "wlf,lineout1-feedback", NULL)) + pdata->lineout1fb = true; + if (of_find_property(np, "wlf,lineout2-feedback", NULL)) + pdata->lineout2fb = true; + + if (of_find_property(np, "wlf,ldoena-always-driven", NULL)) + pdata->lineout2fb = true; + + pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0); + if (pdata->ldo[0].enable < 0) + pdata->ldo[0].enable = 0; + + pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0); + if (pdata->ldo[1].enable < 0) + pdata->ldo[1].enable = 0; + + return 0; +} +#else +static int wm8994_set_pdata_from_of(struct wm8994 *wm8994) +{ + return 0; +} +#endif + /* * Instantiate the generic non-control parts of the device. */ static int wm8994_device_init(struct wm8994 *wm8994, int irq) { - struct wm8994_pdata *pdata = wm8994->dev->platform_data; + struct wm8994_pdata *pdata; struct regmap_config *regmap_config; + const struct reg_default *regmap_patch = NULL; const char *devname; - int ret, i; + int ret, i, patch_regs = 0; int pulls = 0; + if (dev_get_platdata(wm8994->dev)) { + pdata = dev_get_platdata(wm8994->dev); + wm8994->pdata = *pdata; + } + pdata = &wm8994->pdata; + + ret = wm8994_set_pdata_from_of(wm8994); + if (ret != 0) + return ret; + dev_set_drvdata(wm8994->dev, wm8994); /* Add the on-chip regulators first for bootstrapping */ ret = mfd_add_devices(wm8994->dev, -1, wm8994_regulator_devs, ARRAY_SIZE(wm8994_regulator_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); - goto err_regmap; + goto err; } switch (wm8994->type) { @@ -380,7 +365,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) break; default: BUG(); - goto err_regmap; + goto err; } wm8994->supplies = devm_kzalloc(wm8994->dev, @@ -388,7 +373,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) wm8994->num_supplies, GFP_KERNEL); if (!wm8994->supplies) { ret = -ENOMEM; - goto err_regmap; + goto err; } switch (wm8994->type) { @@ -406,21 +391,21 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) break; default: BUG(); - goto err_regmap; + goto err; } - ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies, + ret = devm_regulator_bulk_get(wm8994->dev, wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret); - goto err_regmap; + goto err; } ret = regulator_bulk_enable(wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret); - goto err_get; + goto err; } ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET); @@ -463,7 +448,8 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) ret); goto err_enable; } - wm8994->revision = ret; + wm8994->revision = ret & WM8994_CHIP_REV_MASK; + wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT; switch (wm8994->type) { case WM8994: @@ -474,21 +460,41 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) "revision %c not fully supported\n", 'A' + wm8994->revision); break; + case 2: + case 3: default: + regmap_patch = wm8994_revc_patch; + patch_regs = ARRAY_SIZE(wm8994_revc_patch); break; } break; + + case WM8958: + switch (wm8994->revision) { + case 0: + regmap_patch = wm8958_reva_patch; + patch_regs = ARRAY_SIZE(wm8958_reva_patch); + break; + default: + break; + } + break; + case WM1811: /* Revision C did not change the relevant layer */ if (wm8994->revision > 1) wm8994->revision++; + + regmap_patch = wm1811_reva_patch; + patch_regs = ARRAY_SIZE(wm1811_reva_patch); break; + default: break; } - dev_info(wm8994->dev, "%s revision %c\n", devname, - 'A' + wm8994->revision); + dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname, + 'A' + wm8994->revision, wm8994->cust_id); switch (wm8994->type) { case WM1811: @@ -512,25 +518,43 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) return ret; } - if (pdata) { - wm8994->irq_base = pdata->irq_base; - wm8994->gpio_base = pdata->gpio_base; + /* Explicitly put the device into reset in case regulators + * don't get disabled in order to ensure we know the device + * state. + */ + ret = wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, + wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET)); + if (ret != 0) { + dev_err(wm8994->dev, "Failed to reset device: %d\n", ret); + return ret; + } - /* GPIO configuration is only applied if it's non-zero */ - for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { - if (pdata->gpio_defaults[i]) { - wm8994_set_bits(wm8994, WM8994_GPIO_1 + i, - 0xffff, - pdata->gpio_defaults[i]); - } + if (regmap_patch) { + ret = regmap_register_patch(wm8994->regmap, regmap_patch, + patch_regs); + if (ret != 0) { + dev_err(wm8994->dev, "Failed to register patch: %d\n", + ret); + goto err; } + } - wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven; + wm8994->irq_base = pdata->irq_base; + wm8994->gpio_base = pdata->gpio_base; - if (pdata->spkmode_pu) - pulls |= WM8994_SPKMODE_PU; + /* GPIO configuration is only applied if it's non-zero */ + for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { + if (pdata->gpio_defaults[i]) { + wm8994_set_bits(wm8994, WM8994_GPIO_1 + i, + 0xffff, pdata->gpio_defaults[i]); + } } + wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven; + + if (pdata->spkmode_pu) + pulls |= WM8994_SPKMODE_PU; + /* Disable unneeded pulls */ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD | @@ -556,14 +580,14 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) ret = mfd_add_devices(wm8994->dev, -1, wm8994_devs, ARRAY_SIZE(wm8994_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); goto err_irq; } pm_runtime_enable(wm8994->dev); - pm_runtime_resume(wm8994->dev); + pm_runtime_idle(wm8994->dev); return 0; @@ -572,10 +596,7 @@ err_irq: err_enable: regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); -err_get: - regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); -err_regmap: - regmap_exit(wm8994->regmap); +err: mfd_remove_devices(wm8994->dev); return ret; } @@ -587,21 +608,20 @@ static void wm8994_device_exit(struct wm8994 *wm8994) wm8994_irq_exit(wm8994); regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); - regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); - regmap_exit(wm8994->regmap); } static const struct of_device_id wm8994_of_match[] = { - { .compatible = "wlf,wm1811", }, - { .compatible = "wlf,wm8994", }, - { .compatible = "wlf,wm8958", }, + { .compatible = "wlf,wm1811", .data = (void *)WM1811 }, + { .compatible = "wlf,wm8994", .data = (void *)WM8994 }, + { .compatible = "wlf,wm8958", .data = (void *)WM8958 }, { } }; MODULE_DEVICE_TABLE(of, wm8994_of_match); static int wm8994_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { + const struct of_device_id *of_id; struct wm8994 *wm8994; int ret; @@ -612,9 +632,16 @@ static int wm8994_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, wm8994); wm8994->dev = &i2c->dev; wm8994->irq = i2c->irq; - wm8994->type = id->driver_data; - wm8994->regmap = regmap_init_i2c(i2c, &wm8994_base_regmap_config); + if (i2c->dev.of_node) { + of_id = of_match_device(wm8994_of_match, &i2c->dev); + if (of_id) + wm8994->type = (enum wm8994_type)of_id->data; + } else { + wm8994->type = id->driver_data; + } + + wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config); if (IS_ERR(wm8994->regmap)) { ret = PTR_ERR(wm8994->regmap); dev_err(wm8994->dev, "Failed to allocate register map: %d\n", @@ -643,38 +670,23 @@ static const struct i2c_device_id wm8994_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id); -static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume, - NULL); +static const struct dev_pm_ops wm8994_pm_ops = { + SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL) +}; static struct i2c_driver wm8994_i2c_driver = { .driver = { .name = "wm8994", .owner = THIS_MODULE, .pm = &wm8994_pm_ops, - .of_match_table = wm8994_of_match, + .of_match_table = of_match_ptr(wm8994_of_match), }, .probe = wm8994_i2c_probe, .remove = wm8994_i2c_remove, .id_table = wm8994_i2c_id, }; -static int __init wm8994_i2c_init(void) -{ - int ret; - - ret = i2c_add_driver(&wm8994_i2c_driver); - if (ret != 0) - pr_err("Failed to register wm8994 I2C driver: %d\n", ret); - - return ret; -} -module_init(wm8994_i2c_init); - -static void __exit wm8994_i2c_exit(void) -{ - i2c_del_driver(&wm8994_i2c_driver); -} -module_exit(wm8994_i2c_exit); +module_i2c_driver(wm8994_i2c_driver); MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC"); MODULE_LICENSE("GPL"); |
