diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 333 |
1 files changed, 214 insertions, 119 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index aecd6ddcbbb..6cc4b6acc22 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -23,10 +23,22 @@ config MFD_AS3711 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y help Support for the AS3711 PMIC from AMS +config MFD_AS3722 + bool "ams AS3722 Power Management IC" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y && OF + help + The ams AS3722 is a compact system PMU suitable for mobile phones, + tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down + controllers, 11 LDOs, RTC, automatic battery, temperature and + over current monitoring, GPIOs, ADC and a watchdog. + config PMIC_ADP5520 bool "Analog Devices ADP5520/01 MFD PMIC Core Support" depends on I2C=y @@ -40,13 +52,33 @@ config PMIC_ADP5520 config MFD_AAT2870_CORE bool "AnalogicTech AAT2870" select MFD_CORE - depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS + depends on I2C=y && GPIOLIB help If you say yes here you get support for the AAT2870. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_BCM590XX + tristate "Broadcom BCM590xx PMUs" + select MFD_CORE + select REGMAP_I2C + depends on I2C + help + Support for the BCM590xx PMUs from Broadcom + +config MFD_AXP20X + bool "X-Powers AXP20X" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + If you say Y here you get support for the X-Powers AXP202 and AXP209. + This driver include only the core APIs. You have to select individual + components like regulators or the PEK (Power Enable Key) under the + corresponding menus. + config MFD_CROS_EC tristate "ChromeOS Embedded Controller" select MFD_CORE @@ -68,7 +100,7 @@ config MFD_CROS_EC_I2C config MFD_CROS_EC_SPI tristate "ChromeOS Embedded Controller (SPI)" - depends on MFD_CROS_EC && SPI + depends on MFD_CROS_EC && SPI && OF ---help--- If you say Y here, you get support for talking to the ChromeOS EC @@ -78,7 +110,7 @@ config MFD_CROS_EC_SPI config MFD_ASIC3 bool "Compaq ASIC3" - depends on GENERIC_HARDIRQS && GPIOLIB && ARM + depends on GPIOLIB && ARM select MFD_CORE ---help--- This driver supports the ASIC3 multifunction chip found on many @@ -88,7 +120,7 @@ config PMIC_DA903X bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" depends on I2C=y help - Say yes here to support for Dialog Semiconductor DA9030 (a.k.a + Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC usually found on PXA processors-based platforms. This includes the I2C driver and the core APIs _only_, you have to select @@ -104,7 +136,7 @@ config MFD_DA9052_SPI select REGMAP_SPI select REGMAP_IRQ select PMIC_DA9052 - depends on SPI_MASTER=y && GENERIC_HARDIRQS + depends on SPI_MASTER=y help Support for the Dialog Semiconductor DA9052 PMIC when controlled using SPI. This driver provides common support @@ -116,7 +148,7 @@ config MFD_DA9052_I2C select REGMAP_I2C select REGMAP_IRQ select PMIC_DA9052 - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y help Support for the Dialog Semiconductor DA9052 PMIC when controlled using I2C. This driver provides common support @@ -128,7 +160,7 @@ config MFD_DA9055 select REGMAP_I2C select REGMAP_IRQ select MFD_CORE - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y help Say yes here for support of Dialog Semiconductor DA9055. This is a Power Management IC. This driver provides common support for @@ -139,14 +171,22 @@ config MFD_DA9055 This driver can be built as a module. If built as a module it will be called "da9055" -config MFD_MC13783 - tristate +config MFD_DA9063 + bool "Dialog Semiconductor DA9063 PMIC Support" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + Say yes here for support for the Dialog Semiconductor DA9063 PMIC. + This includes the I2C driver and core APIs. + Additional drivers must be enabled in order to use the functionality + of the device. config MFD_MC13XXX tristate - depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS + depends on (SPI_MASTER || I2C) select MFD_CORE - select MFD_MC13783 help Enable support for the Freescale MC13783 and MC13892 PMICs. This driver provides common support for accessing the device, @@ -155,7 +195,7 @@ config MFD_MC13XXX config MFD_MC13XXX_SPI tristate "Freescale MC13783 and MC13892 SPI interface" - depends on SPI_MASTER && GENERIC_HARDIRQS + depends on SPI_MASTER select REGMAP_SPI select MFD_MC13XXX help @@ -163,7 +203,7 @@ config MFD_MC13XXX_SPI config MFD_MC13XXX_I2C tristate "Freescale MC13892 I2C interface" - depends on I2C && GENERIC_HARDIRQS + depends on I2C select REGMAP_I2C select MFD_MC13XXX help @@ -171,7 +211,7 @@ config MFD_MC13XXX_I2C config HTC_EGPIO bool "HTC EGPIO support" - depends on GENERIC_HARDIRQS && GPIOLIB && ARM + depends on GPIOLIB && ARM help This driver supports the CPLD egpio chip present on several HTC phones. It provides basic support for input @@ -180,7 +220,6 @@ config HTC_EGPIO config HTC_PASIC3 tristate "HTC PASIC3 LED/DS1WM chip support" select MFD_CORE - depends on GENERIC_HARDIRQS help This core driver provides register access for the LED/DS1WM chips labeled "AIC2" and "AIC3", found on HTC Blueangel and @@ -198,7 +237,7 @@ config HTC_I2CPLD config LPC_ICH tristate "Intel ICH LPC" - depends on PCI && GENERIC_HARDIRQS + depends on PCI select MFD_CORE help The LPC bridge function of the Intel ICH provides support for @@ -208,7 +247,7 @@ config LPC_ICH config LPC_SCH tristate "Intel SCH LPC" - depends on PCI && GENERIC_HARDIRQS + depends on PCI select MFD_CORE help LPC bridge function of the Intel SCH provides support for @@ -223,10 +262,20 @@ config MFD_INTEL_MSIC Passage) chip. This chip embeds audio, battery, GPIO, etc. devices used in Intel Medfield platforms. +config MFD_IPAQ_MICRO + bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support" + depends on SA1100_H3100 || SA1100_H3600 + select MFD_CORE + help + Select this to get support for the Microcontroller found in + the Compaq iPAQ handheld computers. This is an Atmel + AT90LS8535 microcontroller flashed with a special iPAQ + firmware using the custom protocol implemented in this driver. + config MFD_JANZ_CMODIO tristate "Janz CMOD-IO PCI MODULbus Carrier Board" select MFD_CORE - depends on PCI && GENERIC_HARDIRQS + depends on PCI help This is the core driver for the Janz CMOD-IO PCI MODULbus carrier board. This device is a PCI to MODULbus bridge which may @@ -251,13 +300,18 @@ config MFD_KEMPLD device may provide functions like watchdog, GPIO, UART and I2C bus. The following modules are supported: + * COMe-bHL6 * COMe-bIP# * COMe-bPC2 (ETXexpress-PC) * COMe-bSC# (ETXexpress-SC T#) + * COMe-cBT6 * COMe-cCT6 * COMe-cDC2 (microETXexpress-DC) + * COMe-cHL6 * COMe-cPC2 (microETXexpress-PC) + * COMe-mBT10 * COMe-mCT10 + * COMe-mTT10 (nanoETXexpress-TT) * ETX-OH This driver can also be built as a module. If so, the module @@ -265,7 +319,7 @@ config MFD_KEMPLD config MFD_88PM800 tristate "Marvell 88PM800" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select REGMAP_I2C select REGMAP_IRQ select MFD_CORE @@ -277,7 +331,7 @@ config MFD_88PM800 config MFD_88PM805 tristate "Marvell 88PM805" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select REGMAP_I2C select REGMAP_IRQ select MFD_CORE @@ -289,7 +343,7 @@ config MFD_88PM805 config MFD_88PM860X bool "Marvell 88PM8606/88PM8607" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select REGMAP_I2C select MFD_CORE help @@ -298,14 +352,28 @@ config MFD_88PM860X select individual components like voltage regulators, RTC and battery-charger under the corresponding menus. +config MFD_MAX14577 + bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + select IRQ_DOMAIN + help + Say yes here to add support for Maxim Semiconductor MAX14577 and + MAX77836 Micro-USB ICs with battery charger. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + config MFD_MAX77686 bool "Maxim Semiconductor MAX77686 PMIC Support" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C select IRQ_DOMAIN help - Say yes here to support for Maxim Semiconductor MAX77686. + Say yes here to add support for Maxim Semiconductor MAX77686. This is a Power Management IC with RTC on chip. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality @@ -313,11 +381,11 @@ config MFD_MAX77686 config MFD_MAX77693 bool "Maxim Semiconductor MAX77693 PMIC Support" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C help - Say yes here to support for Maxim Semiconductor MAX77693. + Say yes here to add support for Maxim Semiconductor MAX77693. This is a companion Power Management IC with Flash, Haptic, Charger, and MUIC(Micro USB Interface Controller) controls on chip. This driver provides common support for accessing the device; @@ -327,32 +395,32 @@ config MFD_MAX77693 config MFD_MAX8907 tristate "Maxim Semiconductor MAX8907 PMIC Support" select MFD_CORE - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select REGMAP_I2C select REGMAP_IRQ help - Say yes here to support for Maxim Semiconductor MAX8907. This is + Say yes here to add support for Maxim Semiconductor MAX8907. This is a Power Management IC. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX8925 bool "Maxim Semiconductor MAX8925 PMIC Support" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE help - Say yes here to support for Maxim Semiconductor MAX8925. This is + Say yes here to add support for Maxim Semiconductor MAX8925. This is a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX8997 bool "Maxim Semiconductor MAX8997/8966 PMIC Support" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select IRQ_DOMAIN help - Say yes here to support for Maxim Semiconductor MAX8997/8966. + Say yes here to add support for Maxim Semiconductor MAX8997/8966. This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, MUIC controls on chip. This driver provides common support for accessing the device; @@ -361,11 +429,11 @@ config MFD_MAX8997 config MFD_MAX8998 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select IRQ_DOMAIN help - Say yes here to support for Maxim Semiconductor MAX8998 and + Say yes here to add support for Maxim Semiconductor MAX8998 and National Semiconductor LP3974. This is a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality @@ -373,7 +441,7 @@ config MFD_MAX8998 config EZX_PCAP bool "Motorola EZXPCAP Support" - depends on GENERIC_HARDIRQS && SPI_MASTER + depends on SPI_MASTER help This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. @@ -381,7 +449,7 @@ config EZX_PCAP config MFD_VIPERBOARD tristate "Nano River Technologies Viperboard" select MFD_CORE - depends on USB && GENERIC_HARDIRQS + depends on USB default n help Say yes here if you want support for Nano River Technologies @@ -395,7 +463,7 @@ config MFD_VIPERBOARD config MFD_RETU tristate "Nokia Retu and Tahvo multi-function device" select MFD_CORE - depends on I2C && GENERIC_HARDIRQS + depends on I2C select REGMAP_IRQ help Retu and Tahvo are a multi-function devices found on Nokia @@ -441,10 +509,11 @@ config MFD_PM8XXX config MFD_PM8921_CORE tristate "Qualcomm PM8921 PMIC chip" - depends on (ARCH_MSM || HEXAGON) - depends on BROKEN + depends on (ARM || HEXAGON) + select IRQ_DOMAIN select MFD_CORE select MFD_PM8XXX + select REGMAP help If you say yes to this option, support will be included for the built-in PM8921 PMIC chip. @@ -455,20 +524,10 @@ config MFD_PM8921_CORE Say M here if you want to include support for PM8921 chip as a module. This will build a module called "pm8921-core". -config MFD_PM8XXX_IRQ - bool "Qualcomm PM8xxx IRQ features" - depends on MFD_PM8XXX - default y if MFD_PM8XXX - help - This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. - - This is required to use certain other PM 8xxx features, such as GPIO - and MPP. - config MFD_RDC321X tristate "RDC R-321x southbridge" select MFD_CORE - depends on PCI && GENERIC_HARDIRQS + depends on PCI help Say yes here if you want to have support for the RDC R-321x SoC southbridge which provides access to GPIOs and Watchdog using the @@ -476,7 +535,7 @@ config MFD_RDC321X config MFD_RTSX_PCI tristate "Realtek PCI-E card reader" - depends on PCI && GENERIC_HARDIRQS + depends on PCI select MFD_CORE help This supports for Realtek PCI-Express card reader including rts5209, @@ -484,9 +543,19 @@ config MFD_RTSX_PCI types of memory cards, such as Memory Stick, Memory Stick Pro, Secure Digital and MultiMediaCard. +config MFD_RTSX_USB + tristate "Realtek USB card reader" + depends on USB + select MFD_CORE + help + Select this option to get support for Realtek USB 2.0 card readers + including RTS5129, RTS5139, RTS5179 and RTS5170. + Realtek card reader supports access to many types of memory cards, + such as Memory Stick Pro, Secure Digital and MultiMediaCard. + config MFD_RC5T583 bool "Ricoh RC5T583 Power Management system device" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C help @@ -500,7 +569,7 @@ config MFD_RC5T583 config MFD_SEC_CORE bool "SAMSUNG Electronics PMIC Series Support" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -543,7 +612,7 @@ config MFD_SM501_GPIO config MFD_SMSC bool "SMSC ECE1099 series chips" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C help @@ -565,7 +634,7 @@ config ABX500_CORE config AB3100_CORE bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" - depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS + depends on I2C=y && ABX500_CORE select MFD_CORE default y if ARCH_U300 help @@ -589,7 +658,7 @@ config AB3100_OTP config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" - depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU + depends on ABX500_CORE && MFD_DB8500_PRCMU select POWER_SUPPLY select MFD_CORE select IRQ_DOMAIN @@ -627,7 +696,8 @@ config MFD_DB8500_PRCMU config MFD_STMPE bool "STMicroelectronics STMPE" - depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS + depends on (I2C=y || SPI_MASTER=y) + depends on OF select MFD_CORE help Support for the STMPE family of I/O Expanders from @@ -653,14 +723,14 @@ menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE config STMPE_I2C - bool "STMicroelectronics STMPE I2C Inteface" + bool "STMicroelectronics STMPE I2C Interface" depends on I2C=y default y help This is used to enable I2C interface of STMPE config STMPE_SPI - bool "STMicroelectronics STMPE SPI Inteface" + bool "STMicroelectronics STMPE SPI Interface" depends on SPI_MASTER help This is used to enable SPI interface of STMPE @@ -668,10 +738,18 @@ endmenu config MFD_STA2X11 bool "STMicroelectronics STA2X11" - depends on STA2X11 && GENERIC_HARDIRQS + depends on STA2X11 select MFD_CORE select REGMAP_MMIO +config MFD_SUN6I_PRCM + bool "Allwinner A31 PRCM controller" + depends on ARCH_SUNXI + select MFD_CORE + help + Support for the PRCM (Power/Reset/Clock Management) unit available + in A31 SoC. + config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" select REGMAP_MMIO @@ -682,13 +760,13 @@ config MFD_SYSCON config MFD_DAVINCI_VOICECODEC tristate select MFD_CORE + select REGMAP_MMIO config MFD_TI_AM335X_TSCADC tristate "TI ADC / Touch Screen chip support" select MFD_CORE select REGMAP select REGMAP_MMIO - depends on GENERIC_HARDIRQS help If you say yes here you get support for Texas Instruments series of Touch Screen /ADC chips. @@ -703,9 +781,20 @@ config MFD_DM355EVM_MSP boards. MSP430 firmware manages resets and power sequencing, inputs from buttons and the IR remote, LEDs, an RTC, and more. +config MFD_LP3943 + tristate "TI/National Semiconductor LP3943 MFD Driver" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Support for the TI/National Semiconductor LP3943. + This driver consists of GPIO and PWM drivers. + With these functionalities, it can be used for LED string control or + general usage such like a GPIO controller and a PWM controller. + config MFD_LP8788 bool "TI LP8788 Power Management Unit Driver" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C select IRQ_DOMAIN @@ -727,29 +816,17 @@ config MFD_PALMAS select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y help If you say yes here you get support for the Palmas series of PMIC chips from Texas Instruments. -config MFD_TI_SSP - tristate "TI Sequencer Serial Port support" - depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS - select MFD_CORE - ---help--- - Say Y here if you want support for the Sequencer Serial Port - in a Texas Instruments TNETV107X SoC. - - To compile this driver as a module, choose M here: the - module will be called ti-ssp. - config TPS6105X tristate "TI TPS61050/61052 Boost Converters" depends on I2C select REGULATOR select MFD_CORE select REGULATOR_FIXED_VOLTAGE - depends on GENERIC_HARDIRQS help This option enables a driver for the TP61050/TPS61052 high-power "white LED driver". This boost converter is @@ -772,7 +849,7 @@ config TPS65010 config TPS6507X tristate "TI TPS6507x Power Management / Touch Screen chips" select MFD_CORE - depends on I2C && GENERIC_HARDIRQS + depends on I2C help If you say yes here you get support for the TPS6507x series of Power Management / Touch Screen chips. These include voltage @@ -786,7 +863,7 @@ config TPS65911_COMPARATOR config MFD_TPS65090 bool "TI TPS65090 Power Management chips" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -799,7 +876,7 @@ config MFD_TPS65090 config MFD_TPS65217 tristate "TI TPS65217 Power Management / White LED chips" - depends on I2C && GENERIC_HARDIRQS + depends on I2C select MFD_CORE select REGMAP_I2C help @@ -812,9 +889,25 @@ config MFD_TPS65217 This driver can also be built as a module. If so, the module will be called tps65217. +config MFD_TPS65218 + tristate "TI TPS65218 Power Management chips" + depends on I2C + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the TPS65218 series of + Power Management chips. + These include voltage regulators, gpio and other features + that are often used in portable devices. Only regulator + component is currently supported. + + This driver can also be built as a module. If so, the module + will be called tps65218. + config MFD_TPS6586X bool "TI TPS6586x Power Management chips" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C help @@ -829,7 +922,7 @@ config MFD_TPS6586X config MFD_TPS65910 bool "TI TPS65910 Power Management chip" - depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS + depends on I2C=y && GPIOLIB select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -850,7 +943,7 @@ config MFD_TPS65912_I2C bool "TI TPS65912 Power Management chip with I2C" select MFD_CORE select MFD_TPS65912 - depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS + depends on I2C=y && GPIOLIB help If you say yes here you get support for the TPS65912 series of PM chips with I2C interface. @@ -859,14 +952,14 @@ config MFD_TPS65912_SPI bool "TI TPS65912 Power Management chip with SPI" select MFD_CORE select MFD_TPS65912 - depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS + depends on SPI_MASTER && GPIOLIB help If you say yes here you get support for the TPS65912 series of PM chips with SPI interface. config MFD_TPS80031 bool "TI TPS80031/TPS80032 Power Management chips" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -880,7 +973,7 @@ config MFD_TPS80031 config TWL4030_CORE bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select IRQ_DOMAIN select REGMAP_I2C help @@ -894,16 +987,6 @@ config TWL4030_CORE high speed USB OTG transceiver, an audio codec (on most versions) and many other features. -config TWL4030_MADC - tristate "TI TWL4030 MADC" - depends on TWL4030_CORE - help - This driver provides support for triton TWL4030-MADC. The - driver supports both RT and SW conversion methods. - - This driver can be built as a module. If so it will be - named twl4030-madc - config TWL4030_POWER bool "TI TWL4030 power resources" depends on TWL4030_CORE && ARM @@ -919,13 +1002,13 @@ config TWL4030_POWER config MFD_TWL4030_AUDIO bool "TI TWL4030 Audio" - depends on TWL4030_CORE && GENERIC_HARDIRQS + depends on TWL4030_CORE select MFD_CORE default n config TWL6040_CORE bool "TI TWL6040 audio codec" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -949,7 +1032,7 @@ config MENELAUS config MFD_WL1273_CORE tristate "TI WL1273 FM radio" - depends on I2C && GENERIC_HARDIRQS + depends on I2C select MFD_CORE default n help @@ -962,7 +1045,6 @@ config MFD_LM3533 depends on I2C select MFD_CORE select REGMAP_I2C - depends on GENERIC_HARDIRQS help Say yes here to enable support for National Semiconductor / TI LM3533 Lighting Power chips. @@ -984,7 +1066,7 @@ config MFD_TIMBERDALE config MFD_TC3589X bool "Toshiba TC35892 and variants" - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select MFD_CORE help Support for the Toshiba TC35892 and variants I/O Expander. @@ -999,7 +1081,7 @@ config MFD_TMIO config MFD_T7L66XB bool "Toshiba T7L66XB" - depends on ARM && HAVE_CLK && GENERIC_HARDIRQS + depends on ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help @@ -1024,7 +1106,7 @@ config MFD_TC6393XB config MFD_VX855 tristate "VIA VX855/VX875 integrated south bridge" - depends on PCI && GENERIC_HARDIRQS + depends on PCI select MFD_CORE help Say yes here to enable support for various functions of the @@ -1042,7 +1124,7 @@ config MFD_ARIZONA_I2C select MFD_ARIZONA select MFD_CORE select REGMAP_I2C - depends on I2C && GENERIC_HARDIRQS + depends on I2C help Support for the Wolfson Microelectronics Arizona platform audio SoC core functionality controlled via I2C. @@ -1052,7 +1134,7 @@ config MFD_ARIZONA_SPI select MFD_ARIZONA select MFD_CORE select REGMAP_SPI - depends on SPI_MASTER && GENERIC_HARDIRQS + depends on SPI_MASTER help Support for the Wolfson Microelectronics Arizona platform audio SoC core functionality controlled via I2C. @@ -1070,7 +1152,7 @@ config MFD_WM5110 Support for Wolfson Microelectronics WM5110 low power audio SoC config MFD_WM8997 - bool "Support Wolfson Microelectronics WM8997" + bool "Wolfson Microelectronics WM8997" depends on MFD_ARIZONA help Support for Wolfson Microelectronics WM8997 low power audio SoC @@ -1078,7 +1160,7 @@ config MFD_WM8997 config MFD_WM8400 bool "Wolfson Microelectronics WM8400" select MFD_CORE - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y select REGMAP_I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio @@ -1088,7 +1170,6 @@ config MFD_WM8400 config MFD_WM831X bool - depends on GENERIC_HARDIRQS config MFD_WM831X_I2C bool "Wolfson Microelectronics WM831x/2x PMICs with I2C" @@ -1096,7 +1177,7 @@ config MFD_WM831X_I2C select MFD_WM831X select REGMAP_I2C select IRQ_DOMAIN - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y help Support for the Wolfson Microelecronics WM831x and WM832x PMICs when controlled using I2C. This driver provides common support @@ -1109,7 +1190,7 @@ config MFD_WM831X_SPI select MFD_WM831X select REGMAP_SPI select IRQ_DOMAIN - depends on SPI_MASTER && GENERIC_HARDIRQS + depends on SPI_MASTER help Support for the Wolfson Microelecronics WM831x and WM832x PMICs when controlled using SPI. This driver provides common support @@ -1118,12 +1199,11 @@ config MFD_WM831X_SPI config MFD_WM8350 bool - depends on GENERIC_HARDIRQS config MFD_WM8350_I2C bool "Wolfson Microelectronics WM8350 with I2C" select MFD_WM8350 - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y help The WM8350 is an integrated audio and power management subsystem with watchdog and RTC functionality for embedded @@ -1136,7 +1216,7 @@ config MFD_WM8994 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y && GENERIC_HARDIRQS + depends on I2C=y help The WM8994 is a highly integrated hi-fi CODEC designed for smartphone applicatiosn. As well as audio functionality it @@ -1145,8 +1225,15 @@ config MFD_WM8994 core support for the WM8994, in order to use the actual functionaltiy of the device other drivers must be enabled. -endmenu -endif +config MFD_STW481X + tristate "Support for ST Microelectronics STw481x" + depends on I2C && ARCH_NOMADIK + select REGMAP_I2C + select MFD_CORE + help + Select this option to enable the STw481x chip driver used + in various ST Microelectronics and ST-Ericsson embedded + Nomadik series. menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 @@ -1162,7 +1249,7 @@ config MCP_SA11X0 # Chip drivers config MCP_UCB1200 - bool "Support for UCB1200 / UCB1300" + tristate "Support for UCB1200 / UCB1300" depends on MCP_SA11X0 select MCP @@ -1172,9 +1259,17 @@ config MCP_UCB1200_TS endmenu -config VEXPRESS_CONFIG - bool "ARM Versatile Express platform infrastructure" - depends on ARM || ARM64 +config MFD_VEXPRESS_SYSREG + bool "Versatile Express System Registers" + depends on VEXPRESS_CONFIG && GPIOLIB + default y + select CLKSRC_MMIO + select GPIO_GENERIC_PLATFORM + select MFD_CORE + select MFD_SYSCON help - Platform configuration infrastructure for the ARM Ltd. - Versatile Express. + System Registers are the platform configuration block + on the ARM Ltd. Versatile Express board. + +endmenu +endif |