aboutsummaryrefslogtreecommitdiff
path: root/drivers/message/i2o/i2o_scsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message/i2o/i2o_scsi.c')
-rw-r--r--drivers/message/i2o/i2o_scsi.c46
1 files changed, 18 insertions, 28 deletions
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 1045c8a518b..1d31d7284cb 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -57,9 +57,8 @@
#include <linux/scatterlist.h>
#include <asm/dma.h>
-#include <asm/system.h>
#include <asm/io.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
@@ -204,7 +203,7 @@ static int i2o_scsi_remove(struct device *dev)
* i2o_scsi_probe - verify if dev is a I2O SCSI device and install it
* @dev: device to verify if it is a I2O SCSI device
*
- * Retrieve channel, id and lun for I2O device. If everthing goes well
+ * Retrieve channel, id and lun for I2O device. If everything goes well
* register the I2O device as SCSI device on the I2O SCSI controller.
*
* Returns 0 on success or negative error code on failure.
@@ -361,7 +360,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
*/
error = le32_to_cpu(msg->body[0]);
- osm_debug("Completed %ld\n", cmd->serial_number);
+ osm_debug("Completed %0x%p\n", cmd);
cmd->result = error & 0xff;
/*
@@ -370,19 +369,15 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
*/
if (cmd->result)
memcpy(cmd->sense_buffer, &msg->body[3],
- min(sizeof(cmd->sense_buffer), (size_t) 40));
+ min(SCSI_SENSE_BUFFERSIZE, 40));
/* only output error code if AdapterStatus is not HBA_SUCCESS */
if ((error >> 8) & 0xff)
osm_err("SCSI error %08x\n", error);
dev = &c->pdev->dev;
- if (cmd->use_sg)
- dma_unmap_sg(dev, cmd->request_buffer, cmd->use_sg,
- cmd->sc_data_direction);
- else if (cmd->SCp.dma_handle)
- dma_unmap_single(dev, cmd->SCp.dma_handle, cmd->request_bufflen,
- cmd->sc_data_direction);
+
+ scsi_dma_unmap(cmd);
cmd->scsi_done(cmd);
@@ -394,7 +389,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
* @i2o_dev: the I2O device which was added
*
* If a I2O device is added we catch the notification, because I2O classes
- * other then SCSI peripheral will not be received through
+ * other than SCSI peripheral will not be received through
* i2o_scsi_probe().
*/
static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev)
@@ -510,7 +505,7 @@ static struct i2o_driver i2o_scsi_driver = {
* Locks: takes the controller lock on error path only
*/
-static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
+static int i2o_scsi_queuecommand_lck(struct scsi_cmnd *SCpnt,
void (*done) (struct scsi_cmnd *))
{
struct i2o_controller *c;
@@ -532,7 +527,6 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
* Do the incoming paperwork
*/
i2o_dev = SCpnt->device->hostdata;
- c = i2o_dev->iop;
SCpnt->scsi_done = done;
@@ -542,7 +536,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
done(SCpnt);
goto exit;
}
-
+ c = i2o_dev->iop;
tid = i2o_dev->lct_data.tid;
osm_debug("qcmd: Tid = %03x\n", tid);
@@ -664,21 +658,15 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
if (sgl_offset != SGL_OFFSET_0) {
/* write size of data addressed by SGL */
- *mptr++ = cpu_to_le32(SCpnt->request_bufflen);
+ *mptr++ = cpu_to_le32(scsi_bufflen(SCpnt));
/* Now fill in the SGList and command */
- if (SCpnt->use_sg) {
- if (!i2o_dma_map_sg(c, SCpnt->request_buffer,
- SCpnt->use_sg,
+
+ if (scsi_sg_count(SCpnt)) {
+ if (!i2o_dma_map_sg(c, scsi_sglist(SCpnt),
+ scsi_sg_count(SCpnt),
SCpnt->sc_data_direction, &mptr))
goto nomem;
- } else {
- SCpnt->SCp.dma_handle =
- i2o_dma_map_single(c, SCpnt->request_buffer,
- SCpnt->request_bufflen,
- SCpnt->sc_data_direction, &mptr);
- if (dma_mapping_error(SCpnt->SCp.dma_handle))
- goto nomem;
}
}
@@ -689,7 +677,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
/* Queue the message */
i2o_msg_post(c, msg);
- osm_debug("Issued %ld\n", SCpnt->serial_number);
+ osm_debug("Issued %0x%p\n", SCpnt);
return 0;
@@ -699,7 +687,9 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
exit:
return rc;
-};
+}
+
+static DEF_SCSI_QCMD(i2o_scsi_queuecommand)
/**
* i2o_scsi_abort - abort a running command