diff options
Diffstat (limited to 'drivers/message/fusion/mptscsih.c')
| -rw-r--r-- | drivers/message/fusion/mptscsih.c | 398 |
1 files changed, 205 insertions, 193 deletions
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 8440f78f696..2a1c6f21af2 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -46,6 +46,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/init.h> #include <linux/errno.h> #include <linux/kdev_t.h> @@ -628,6 +629,16 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) return 1; } + if (ioc->bus_type == SAS) { + VirtDevice *vdevice = sc->device->hostdata; + + if (!vdevice || !vdevice->vtarget || + vdevice->vtarget->deleted) { + sc->result = DID_NO_CONNECT << 16; + goto out; + } + } + sc->host_scribble = NULL; sc->result = DID_OK << 16; /* Set default reply as OK */ pScsiReq = (SCSIIORequest_t *) mf; @@ -653,6 +664,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) u32 log_info; status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK; + scsi_state = pScsiReply->SCSIState; scsi_status = pScsiReply->SCSIStatus; xfer_cnt = le32_to_cpu(pScsiReply->TransferCount); @@ -689,6 +701,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) switch(status) { case MPI_IOCSTATUS_BUSY: /* 0x0002 */ + case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ /* CHECKME! * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry) * But not: DID_BUS_BUSY lest one risk @@ -726,13 +739,36 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ if ( ioc->bus_type == SAS ) { - u16 ioc_status = le16_to_cpu(pScsiReply->IOCStatus); - if (ioc_status & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { - if ((log_info & SAS_LOGINFO_MASK) - == SAS_LOGINFO_NEXUS_LOSS) { - sc->result = (DID_BUS_BUSY << 16); - break; - } + u16 ioc_status = + le16_to_cpu(pScsiReply->IOCStatus); + if ((ioc_status & + MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) + && + ((log_info & SAS_LOGINFO_MASK) == + SAS_LOGINFO_NEXUS_LOSS)) { + VirtDevice *vdevice = + sc->device->hostdata; + + /* flag the device as being in + * device removal delay so we can + * notify the midlayer to hold off + * on timeout eh */ + if (vdevice && vdevice-> + vtarget && + vdevice->vtarget-> + raidVolume) + printk(KERN_INFO + "Skipping Raid Volume" + "for inDMD\n"); + else if (vdevice && + vdevice->vtarget) + vdevice->vtarget-> + inDMD = 1; + + sc->result = + (DID_TRANSPORT_DISRUPTED + << 16); + break; } } else if (ioc->bus_type == FC) { /* @@ -756,6 +792,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) * than an unsolicited DID_ABORT. */ sc->result = DID_RESET << 16; + break; case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ if (ioc->bus_type == FC) @@ -781,11 +818,37 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) * precedence! */ sc->result = (DID_OK << 16) | scsi_status; - if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) { - /* Have already saved the status and sense data + if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) { + + /* + * For an Errata on LSI53C1030 + * When the length of request data + * and transfer data are different + * with result of command (READ or VERIFY), + * DID_SOFT_ERROR is set. */ - ; - } else { + if (ioc->bus_type == SPI) { + if ((pScsiReq->CDB[0] == READ_6 && ((pScsiReq->CDB[1] & 0x02) == 0)) || + pScsiReq->CDB[0] == READ_10 || + pScsiReq->CDB[0] == READ_12 || + (pScsiReq->CDB[0] == READ_16 && + ((pScsiReq->CDB[1] & 0x02) == 0)) || + pScsiReq->CDB[0] == VERIFY || + pScsiReq->CDB[0] == VERIFY_16) { + if (scsi_bufflen(sc) != + xfer_cnt) { + sc->result = + DID_SOFT_ERROR << 16; + printk(KERN_WARNING "Errata" + "on LSI53C1030 occurred." + "sc->req_bufflen=0x%02x," + "xfer_cnt=0x%02x\n", + scsi_bufflen(sc), + xfer_cnt); + } + } + } + if (xfer_cnt < sc->underflow) { if (scsi_status == SAM_STAT_BUSY) sc->result = SAM_STAT_BUSY; @@ -824,7 +887,58 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) sc->result = (DID_OK << 16) | scsi_status; if (scsi_state == 0) { ; - } else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) { + } else if (scsi_state & + MPI_SCSI_STATE_AUTOSENSE_VALID) { + + /* + * For potential trouble on LSI53C1030. + * (date:2007.xx.) + * It is checked whether the length of + * request data is equal to + * the length of transfer and residual. + * MEDIUM_ERROR is set by incorrect data. + */ + if ((ioc->bus_type == SPI) && + (sc->sense_buffer[2] & 0x20)) { + u32 difftransfer; + difftransfer = + sc->sense_buffer[3] << 24 | + sc->sense_buffer[4] << 16 | + sc->sense_buffer[5] << 8 | + sc->sense_buffer[6]; + if (((sc->sense_buffer[3] & 0x80) == + 0x80) && (scsi_bufflen(sc) + != xfer_cnt)) { + sc->sense_buffer[2] = + MEDIUM_ERROR; + sc->sense_buffer[12] = 0xff; + sc->sense_buffer[13] = 0xff; + printk(KERN_WARNING"Errata" + "on LSI53C1030 occurred." + "sc->req_bufflen=0x%02x," + "xfer_cnt=0x%02x\n" , + scsi_bufflen(sc), + xfer_cnt); + } + if (((sc->sense_buffer[3] & 0x80) + != 0x80) && + (scsi_bufflen(sc) != + xfer_cnt + difftransfer)) { + sc->sense_buffer[2] = + MEDIUM_ERROR; + sc->sense_buffer[12] = 0xff; + sc->sense_buffer[13] = 0xff; + printk(KERN_WARNING + "Errata on LSI53C1030 occurred" + "sc->req_bufflen=0x%02x," + " xfer_cnt=0x%02x," + "difftransfer=0x%02x\n", + scsi_bufflen(sc), + xfer_cnt, + difftransfer); + } + } + /* * If running against circa 200003dd 909 MPT f/w, * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL @@ -872,7 +986,6 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ - case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ @@ -892,7 +1005,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) #endif } /* end of address reply case */ - +out: /* Unmap the DMA buffers, if any. */ scsi_dma_unmap(sc); @@ -913,7 +1026,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) * * Must be called while new I/Os are being queued. */ -static void +void mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd) { MPT_ADAPTER *ioc = hd->ioc; @@ -944,6 +1057,7 @@ mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd) sc->scsi_done(sc); } } +EXPORT_SYMBOL(mptscsih_flush_running_cmds); /* * mptscsih_search_running_cmds - Delete any commands associated @@ -1062,11 +1176,6 @@ mptscsih_remove(struct pci_dev *pdev) MPT_SCSI_HOST *hd; int sz1; - if(!host) { - mpt_detach(pdev); - return; - } - scsi_remove_host(host); if((hd = shost_priv(host)) == NULL) @@ -1175,101 +1284,17 @@ mptscsih_info(struct Scsi_Host *SChost) return h->info_kbuf; } -struct info_str { - char *buffer; - int length; - int offset; - int pos; -}; - -static void -mptscsih_copy_mem_info(struct info_str *info, char *data, int len) -{ - if (info->pos + len > info->length) - len = info->length - info->pos; - - if (info->pos + len < info->offset) { - info->pos += len; - return; - } - - if (info->pos < info->offset) { - data += (info->offset - info->pos); - len -= (info->offset - info->pos); - } - - if (len > 0) { - memcpy(info->buffer + info->pos, data, len); - info->pos += len; - } -} - -static int -mptscsih_copy_info(struct info_str *info, char *fmt, ...) -{ - va_list args; - char buf[81]; - int len; - - va_start(args, fmt); - len = vsprintf(buf, fmt, args); - va_end(args); - - mptscsih_copy_mem_info(info, buf, len); - return len; -} - -static int -mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int len) -{ - struct info_str info; - - info.buffer = pbuf; - info.length = len; - info.offset = offset; - info.pos = 0; - - mptscsih_copy_info(&info, "%s: %s, ", ioc->name, ioc->prod_name); - mptscsih_copy_info(&info, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word); - mptscsih_copy_info(&info, "Ports=%d, ", ioc->facts.NumberOfPorts); - mptscsih_copy_info(&info, "MaxQ=%d\n", ioc->req_depth); - - return ((info.pos > info.offset) ? info.pos - info.offset : 0); -} - -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/** - * mptscsih_proc_info - Return information about MPT adapter - * @host: scsi host struct - * @buffer: if write, user data; if read, buffer for user - * @start: returns the buffer address - * @offset: if write, 0; if read, the current offset into the buffer from - * the previous read. - * @length: if write, return length; - * @func: write = 1; read = 0 - * - * (linux scsi_host_template.info routine) - */ -int -mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, - int length, int func) +int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host) { MPT_SCSI_HOST *hd = shost_priv(host); MPT_ADAPTER *ioc = hd->ioc; - int size = 0; - if (func) { - /* - * write is not supported - */ - } else { - if (start) - *start = buffer; + seq_printf(m, "%s: %s, ", ioc->name, ioc->prod_name); + seq_printf(m, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word); + seq_printf(m, "Ports=%d, ", ioc->facts.NumberOfPorts); + seq_printf(m, "MaxQ=%d\n", ioc->req_depth); - size = mptscsih_host_info(ioc, buffer, offset, length); - } - - return size; + return 0; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -1279,7 +1304,6 @@ mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t off /** * mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine. * @SCpnt: Pointer to scsi_cmnd structure - * @done: Pointer SCSI mid-layer IO completion function * * (linux scsi_host_template.queuecommand routine) * This is the primary SCSI IO start routine. Create a MPI SCSIIORequest @@ -1288,7 +1312,7 @@ mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t off * Returns 0. (rtn value discarded by linux scsi mid-layer) */ int -mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) +mptscsih_qcmd(struct scsi_cmnd *SCpnt) { MPT_SCSI_HOST *hd; MPT_FRAME_HDR *mf; @@ -1304,16 +1328,12 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) hd = shost_priv(SCpnt->device->host); ioc = hd->ioc; - SCpnt->scsi_done = done; - dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p, done()=%p\n", - ioc->name, SCpnt, done)); + dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n", + ioc->name, SCpnt)); - if (ioc->taskmgmt_quiesce_io) { - dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n", - ioc->name, SCpnt)); + if (ioc->taskmgmt_quiesce_io) return SCSI_MLQUEUE_HOST_BUSY; - } /* * Put together a MPT SCSI request... @@ -1352,9 +1372,14 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) && (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) && (SCpnt->device->tagged_supported)) { scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ; - } else { + if (SCpnt->request && SCpnt->request->ioprio) { + if (((SCpnt->request->ioprio & 0x7) == 1) || + !(SCpnt->request->ioprio & 0x7)) + scsictl |= MPI_SCSIIO_CONTROL_HEADOFQ; + } + } else scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED; - } + /* Use the above information to set up the message frame */ @@ -1521,7 +1546,13 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, return 0; } - if (ioc_raw_state & MPI_DOORBELL_ACTIVE) { + /* DOORBELL ACTIVE check is not required if + * MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported. + */ + + if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) + && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) && + (ioc_raw_state & MPI_DOORBELL_ACTIVE)) { printk(MYIOC_s_WARN_FMT "TaskMgmt type=%x: ioc_state: " "DOORBELL_ACTIVE (0x%x)!\n", @@ -1617,9 +1648,12 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) if (issue_hard_reset) { - printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", - ioc->name, __func__); - retval = mpt_HardResetHandler(ioc, CAN_SLEEP); + printk(MYIOC_s_WARN_FMT + "Issuing Reset from %s!! doorbell=0x%08x\n", + ioc->name, __func__, mpt_GetIocState(ioc, 0)); + retval = (ioc->bus_type == SAS) ? + mpt_HardResetHandler(ioc, CAN_SLEEP) : + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); mpt_free_msg_frame(ioc, mf); } @@ -1636,6 +1670,7 @@ mptscsih_get_tm_timeout(MPT_ADAPTER *ioc) case FC: return 40; case SAS: + return 30; case SPI: default: return 10; @@ -1660,7 +1695,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) int scpnt_idx; int retval; VirtDevice *vdevice; - ulong sn = SCpnt->serial_number; MPT_ADAPTER *ioc; /* If we can't locate our host adapter structure, return FAILED status. @@ -1685,7 +1719,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) ioc->name, SCpnt)); SCpnt->result = DID_NO_CONNECT << 16; SCpnt->scsi_done(SCpnt); - retval = 0; + retval = SUCCESS; goto out; } @@ -1700,6 +1734,17 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) goto out; } + /* Task aborts are not supported for volumes. + */ + if (vdevice->vtarget->raidVolume) { + dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT + "task abort: raid volume (sc=%p)\n", + ioc->name, SCpnt)); + SCpnt->result = DID_RESET << 16; + retval = FAILED; + goto out; + } + /* Find this command */ if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) { @@ -1710,7 +1755,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: " "Command not in the active list! (sc=%p)\n", ioc->name, SCpnt)); - retval = 0; + retval = SUCCESS; goto out; } @@ -1729,17 +1774,13 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) */ mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx); ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext; - - hd->abortSCpnt = SCpnt; - retval = mptscsih_IssueTaskMgmt(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun, ctx2abort, mptscsih_get_tm_timeout(ioc)); - if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx && - SCpnt->serial_number == sn) { + if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) { dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: command still in active list! (sc=%p)\n", ioc->name, SCpnt)); @@ -1752,8 +1793,9 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) } out: - printk(MYIOC_s_INFO_FMT "task abort: %s (sc=%p)\n", - ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), SCpnt); + printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n", + ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval, + SCpnt); return retval; } @@ -1790,7 +1832,7 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt) vdevice = SCpnt->device->hostdata; if (!vdevice || !vdevice->vtarget) { - retval = SUCCESS; + retval = 0; goto out; } @@ -1902,7 +1944,7 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt) /* If our attempts to reset the host failed, then return a failed * status. The host will be taken off line by the SCSI mid-layer. */ - retval = mpt_HardResetHandler(ioc, CAN_SLEEP); + retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); if (retval < 0) status = FAILED; else @@ -2036,6 +2078,8 @@ mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, mpt_clear_taskmgmt_in_progress_flag(ioc); ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING; complete(&ioc->taskmgmt_cmds.done); + if (ioc->bus_type == SAS) + ioc->schedule_target_reset(ioc); return 1; } return 0; @@ -2255,6 +2299,8 @@ mptscsih_slave_destroy(struct scsi_device *sdev) starget = scsi_target(sdev); vtarget = starget->hostdata; vdevice = sdev->hostdata; + if (!vdevice) + return; mptscsih_search_running_cmds(hd, vdevice); vtarget->num_luns--; @@ -2268,11 +2314,12 @@ mptscsih_slave_destroy(struct scsi_device *sdev) * mptscsih_change_queue_depth - This function will set a devices queue depth * @sdev: per scsi_device pointer * @qdepth: requested queue depth + * @reason: calling context * * Adding support for new 'change_queue_depth' api. */ int -mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) +mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) { MPT_SCSI_HOST *hd = shost_priv(sdev->host); VirtTarget *vtarget; @@ -2284,6 +2331,9 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) starget = scsi_target(sdev); vtarget = starget->hostdata; + if (reason != SCSI_QDEPTH_DEFAULT) + return -EOPNOTSUPP; + if (ioc->bus_type == SPI) { if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)) max_depth = 1; @@ -2293,7 +2343,10 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) else max_depth = MPT_SCSI_CMD_PER_DEV_LOW; } else - max_depth = MPT_SCSI_CMD_PER_DEV_HIGH; + max_depth = ioc->sh->can_queue; + + if (!sdev->tagged_supported) + max_depth = 1; if (qdepth > max_depth) qdepth = max_depth; @@ -2347,12 +2400,15 @@ mptscsih_slave_configure(struct scsi_device *sdev) ioc->name, vtarget->negoFlags, vtarget->maxOffset, vtarget->minSyncFactor)); - mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); + mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH, + SCSI_QDEPTH_DEFAULT); dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "tagged %d, simple %d, ordered %d\n", ioc->name,sdev->tagged_supported, sdev->simple_tags, sdev->ordered_tags)); + blk_queue_dma_alignment (sdev->request_queue, 512 - 1); + return 0; } @@ -2464,9 +2520,7 @@ mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i) } /** - * mptscsih_set_scsi_lookup - * - * writes a scmd entry into the ScsiLookup[] array list + * mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list * * @ioc: Pointer to MPT_ADAPTER structure * @i: index into the array @@ -2627,53 +2681,9 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, return 1; } -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* mptscsih_timer_expired - Call back for timer process. - * Used only for dv functionality. - * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long - * - */ -void -mptscsih_timer_expired(unsigned long data) -{ - MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) data; - MPT_ADAPTER *ioc = hd->ioc; - - ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Timer Expired! Cmd %p\n", ioc->name, hd->cmdPtr)); - - if (hd->cmdPtr) { - MPIHeader_t *cmd = (MPIHeader_t *)hd->cmdPtr; - - if (cmd->Function == MPI_FUNCTION_SCSI_IO_REQUEST) { - /* Desire to issue a task management request here. - * TM requests MUST be single threaded. - * If old eh code and no TM current, issue request. - * If new eh code, do nothing. Wait for OS cmd timeout - * for bus reset. - */ - } else { - /* Perform a FW reload */ - if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0) { - printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", ioc->name); - } - } - } else { - /* This should NEVER happen */ - printk(MYIOC_s_WARN_FMT "Null cmdPtr!!!!\n", ioc->name); - } - - /* No more processing. - * TM call will generate an interrupt for SCSI TM Management. - * The FW will reply to all outstanding commands, callback will finish cleanup. - * Hard reset clean-up will free all resources. - */ - ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Timer Expired Complete!\n", ioc->name)); - - return; -} /** - * mptscsih_get_completion_code - + * mptscsih_get_completion_code - get completion code from MPT request * @ioc: Pointer to MPT_ADAPTER structure * @req: Pointer to original MPT request frame * @reply: Pointer to MPT reply frame (NULL if TurboReply) @@ -2985,9 +2995,12 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) goto out; } if (!timeleft) { - printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", - ioc->name, __func__); - mpt_HardResetHandler(ioc, CAN_SLEEP); + printk(MYIOC_s_WARN_FMT + "Issuing Reset from %s!! doorbell=0x%08xh" + " cmd=0x%02x\n", + ioc->name, __func__, mpt_GetIocState(ioc, 0), + cmd); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); mpt_free_msg_frame(ioc, mf); } goto out; @@ -3249,7 +3262,7 @@ EXPORT_SYMBOL(mptscsih_shutdown); EXPORT_SYMBOL(mptscsih_suspend); EXPORT_SYMBOL(mptscsih_resume); #endif -EXPORT_SYMBOL(mptscsih_proc_info); +EXPORT_SYMBOL(mptscsih_show_info); EXPORT_SYMBOL(mptscsih_info); EXPORT_SYMBOL(mptscsih_qcmd); EXPORT_SYMBOL(mptscsih_slave_destroy); @@ -3265,6 +3278,5 @@ EXPORT_SYMBOL(mptscsih_scandv_complete); EXPORT_SYMBOL(mptscsih_event_process); EXPORT_SYMBOL(mptscsih_ioc_reset); EXPORT_SYMBOL(mptscsih_change_queue_depth); -EXPORT_SYMBOL(mptscsih_timer_expired); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |