aboutsummaryrefslogtreecommitdiff
path: root/drivers/message/fusion/lsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message/fusion/lsi')
-rw-r--r--drivers/message/fusion/lsi/mpi.h11
-rw-r--r--drivers/message/fusion/lsi/mpi_cnfg.h233
-rw-r--r--drivers/message/fusion/lsi/mpi_fc.h2
-rw-r--r--drivers/message/fusion/lsi/mpi_history.txt159
-rw-r--r--drivers/message/fusion/lsi/mpi_inb.h221
-rw-r--r--drivers/message/fusion/lsi/mpi_init.h13
-rw-r--r--drivers/message/fusion/lsi/mpi_ioc.h122
-rw-r--r--drivers/message/fusion/lsi/mpi_lan.h2
-rw-r--r--drivers/message/fusion/lsi/mpi_log_fc.h6
-rw-r--r--drivers/message/fusion/lsi/mpi_log_sas.h313
-rw-r--r--drivers/message/fusion/lsi/mpi_raid.h18
-rw-r--r--drivers/message/fusion/lsi/mpi_sas.h23
-rw-r--r--drivers/message/fusion/lsi/mpi_targ.h2
-rw-r--r--drivers/message/fusion/lsi/mpi_tool.h2
-rw-r--r--drivers/message/fusion/lsi/mpi_type.h4
15 files changed, 687 insertions, 444 deletions
diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
index 81ad77622da..11c0f461320 100644
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2005 LSI Logic Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi.h
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
- * mpi.h Version: 01.05.11
+ * mpi.h Version: 01.05.16
*
* Version History
* ---------------
@@ -77,6 +77,11 @@
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
+ * 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
+ * 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT.
+ * 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT.
+ * 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT.
+ * 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
@@ -107,7 +112,7 @@
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT (0x0D)
+#define MPI_HEADER_VERSION_UNIT (0x13)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index 47e13e360c1..d9bcfba6b04 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2005 LSI Logic Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_cnfg.h
* Title: MPI Config message, structures, and Pages
* Creation Date: July 27, 2000
*
- * mpi_cnfg.h Version: 01.05.12
+ * mpi_cnfg.h Version: 01.05.18
*
* Version History
* ---------------
@@ -276,6 +276,52 @@
* Added AdditionalControlFlags, MaxTargetPortConnectTime,
* ReportDeviceMissingDelay, and IODeviceMissingDelay
* fields to SAS IO Unit Page 1.
+ * 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to
+ * Manufacturing Page 5.
+ * Added Manufacturing pages 8 through 10.
+ * Added defines for supported metadata size bits in
+ * CapabilitiesFlags field of IOC Page 6.
+ * Added defines for metadata size bits in VolumeSettings
+ * field of RAID Volume Page 0.
+ * Added SATA Link Reset settings, Enable SATA Asynchronous
+ * Notification bit, and HideNonZeroAttachedPhyIdentifiers
+ * bit to AdditionalControlFlags field of SAS IO Unit
+ * Page 1.
+ * Added defines for Enclosure Devices Unmapped and
+ * Device Limit Exceeded bits in Status field of SAS IO
+ * Unit Page 2.
+ * Added more AccessStatus values for SAS Device Page 0.
+ * Added bit for SATA Asynchronous Notification Support in
+ * Flags field of SAS Device Page 0.
+ * 02-28-07 01.05.14 Added ExtFlags field to Manufacturing Page 4.
+ * Added Disable SMART Polling for CapabilitiesFlags of
+ * IOC Page 6.
+ * Added Disable SMART Polling to DeviceSettings of BIOS
+ * Page 1.
+ * Added Multi-Port Domain bit for DiscoveryStatus field
+ * of SAS IO Unit Page.
+ * Added Multi-Port Domain Illegal flag for SAS IO Unit
+ * Page 1 AdditionalControlFlags field.
+ * 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID
+ * Metadata bit to Manufacturing Page 4 ExtFlags field.
+ * Added Internal Connector to End Device Present bit to
+ * Expander Page 0 Flags field.
+ * Fixed define for
+ * MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ * define.
+ * Added BIOS Page 4 structure.
+ * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ * Physcial Disk Page 1.
+ * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of
+ * Manufacturing Page 4.
+ * Added Solid State Drives Supported bit to IOC Page 6
+ * Capabilities Flags.
+ * Added new value for AccessStatus field of SAS Device
+ * Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field
+ * to control coercion size and the mixing of SAS and SATA
+ * SSD drives.
* --------------------------------------------------------------------------
*/
@@ -537,6 +583,7 @@ typedef struct _MSG_CONFIG_REPLY
#define MPI_MANUFACTPAGE_DEVID_SAS1066E (0x005A)
#define MPI_MANUFACTPAGE_DEVID_SAS1068 (0x0054)
#define MPI_MANUFACTPAGE_DEVID_SAS1068E (0x0058)
+#define MPI_MANUFACTPAGE_DEVID_SAS1068_820XELP (0x0059)
#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0062)
@@ -622,7 +669,7 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
U8 InfoSize1; /* 0Bh */
U8 InquirySize; /* 0Ch */
U8 Flags; /* 0Dh */
- U16 Reserved2; /* 0Eh */
+ U16 ExtFlags; /* 0Eh */
U8 InquiryData[56]; /* 10h */
U32 ISVolumeSettings; /* 48h */
U32 IMEVolumeSettings; /* 4Ch */
@@ -641,7 +688,7 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
-#define MPI_MANUFACTURING4_PAGEVERSION (0x04)
+#define MPI_MANUFACTURING4_PAGEVERSION (0x05)
/* defines for the Flags field */
#define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE (0x80)
@@ -653,18 +700,39 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
#define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x02)
#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01)
+/* defines for the ExtFlags field */
+#define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE (0x0180)
+#define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE (7)
+#define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE (0)
+#define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE (1)
+
+#define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA (0x0040)
+#define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD (0x0020)
+#define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT (0x0010)
+#define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA (0x0008)
+#define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE (0x0004)
+#define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE (0x0002)
+#define MPI_MANPAGE4_EXTFLAGS_LEGACY_MODE (0x0001)
+
+
+#ifndef MPI_MANPAGE5_NUM_FORCEWWID
+#define MPI_MANPAGE5_NUM_FORCEWWID (1)
+#endif
typedef struct _CONFIG_PAGE_MANUFACTURING_5
{
CONFIG_PAGE_HEADER Header; /* 00h */
U64 BaseWWID; /* 04h */
U8 Flags; /* 0Ch */
- U8 Reserved1; /* 0Dh */
+ U8 NumForceWWID; /* 0Dh */
U16 Reserved2; /* 0Eh */
+ U32 Reserved3; /* 10h */
+ U32 Reserved4; /* 14h */
+ U64 ForceWWID[MPI_MANPAGE5_NUM_FORCEWWID]; /* 18h */
} CONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5,
ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t;
-#define MPI_MANUFACTURING5_PAGEVERSION (0x01)
+#define MPI_MANUFACTURING5_PAGEVERSION (0x02)
/* defines for the Flags field */
#define MPI_MANPAGE5_TWO_WWID_PER_PHY (0x01)
@@ -740,6 +808,36 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_7
#define MPI_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
+typedef struct _CONFIG_PAGE_MANUFACTURING_8
+{
+ CONFIG_PAGE_HEADER Header; /* 00h */
+ U32 ProductSpecificInfo;/* 04h */
+} CONFIG_PAGE_MANUFACTURING_8, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_8,
+ ManufacturingPage8_t, MPI_POINTER pManufacturingPage8_t;
+
+#define MPI_MANUFACTURING8_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_9
+{
+ CONFIG_PAGE_HEADER Header; /* 00h */
+ U32 ProductSpecificInfo;/* 04h */
+} CONFIG_PAGE_MANUFACTURING_9, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_9,
+ ManufacturingPage9_t, MPI_POINTER pManufacturingPage9_t;
+
+#define MPI_MANUFACTURING9_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_10
+{
+ CONFIG_PAGE_HEADER Header; /* 00h */
+ U32 ProductSpecificInfo;/* 04h */
+} CONFIG_PAGE_MANUFACTURING_10, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_10,
+ ManufacturingPage10_t, MPI_POINTER pManufacturingPage10_t;
+
+#define MPI_MANUFACTURING10_PAGEVERSION (0x00)
+
+
/****************************************************************************
* IO Unit Config Pages
****************************************************************************/
@@ -1080,10 +1178,18 @@ typedef struct _CONFIG_PAGE_IOC_6
} CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6,
IOCPage6_t, MPI_POINTER pIOCPage6_t;
-#define MPI_IOCPAGE6_PAGEVERSION (0x00)
+#define MPI_IOCPAGE6_PAGEVERSION (0x01)
/* IOC Page 6 Capabilities Flags */
+#define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT (0x00000020)
+#define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT (0x00000010)
+#define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING (0x00000008)
+
+#define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE (0x00000006)
+#define MPI_IOCPAGE6_CAP_FLAGS_64MB_METADATA_SIZE (0x00000000)
+#define MPI_IOCPAGE6_CAP_FLAGS_512MB_METADATA_SIZE (0x00000002)
+
#define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
@@ -1150,6 +1256,7 @@ typedef struct _CONFIG_PAGE_BIOS_1
#define MPI_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
/* values for the DeviceSettings field */
+#define MPI_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010)
#define MPI_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
#define MPI_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
#define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
@@ -1346,6 +1453,15 @@ typedef struct _CONFIG_PAGE_BIOS_2
#define MPI_BIOSPAGE2_FORM_SAS_WWN (0x05)
#define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
+typedef struct _CONFIG_PAGE_BIOS_4
+{
+ CONFIG_PAGE_HEADER Header; /* 00h */
+ U64 ReassignmentBaseWWID; /* 04h */
+} CONFIG_PAGE_BIOS_4, MPI_POINTER PTR_CONFIG_PAGE_BIOS_4,
+ BIOSPage4_t, MPI_POINTER pBIOSPage4_t;
+
+#define MPI_BIOSPAGE4_PAGEVERSION (0x00)
+
/****************************************************************************
* SCSI Port Config Pages
@@ -2160,6 +2276,11 @@ typedef struct _RAID_VOL0_SETTINGS
#define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004)
#define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008)
#define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102 (0x0020) /* obsolete */
+
+#define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE (0x00C0)
+#define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE (0x0000)
+#define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE (0x0040)
+
#define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010)
#define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000)
@@ -2203,7 +2324,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
-#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x06)
+#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x07)
/* values for RAID Volume Page 0 InactiveStatus field */
#define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
@@ -2218,11 +2339,11 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
typedef struct _CONFIG_PAGE_RAID_VOL_1
{
CONFIG_PAGE_HEADER Header; /* 00h */
- U8 VolumeID; /* 01h */
- U8 VolumeBus; /* 02h */
- U8 VolumeIOC; /* 03h */
- U8 Reserved0; /* 04h */
- U8 GUID[24]; /* 05h */
+ U8 VolumeID; /* 04h */
+ U8 VolumeBus; /* 05h */
+ U8 VolumeIOC; /* 06h */
+ U8 Reserved0; /* 07h */
+ U8 GUID[24]; /* 08h */
U8 Name[32]; /* 20h */
U64 WWID; /* 40h */
U32 Reserved1; /* 48h */
@@ -2277,7 +2398,7 @@ typedef struct _RAID_PHYS_DISK0_STATUS
} RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS,
RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t;
-/* RAID Volume 2 IM Physical Disk DiskStatus flags */
+/* RAID Physical Disk PhysDiskStatus flags */
#define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01)
#define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02)
@@ -2332,6 +2453,15 @@ typedef struct _RAID_PHYS_DISK1_PATH
#define MPI_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
#define MPI_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength or NumPhysDiskPaths at runtime.
+ */
+#ifndef MPI_RAID_PHYS_DISK1_PATH_MAX
+#define MPI_RAID_PHYS_DISK1_PATH_MAX (1)
+#endif
+
typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
{
CONFIG_PAGE_HEADER Header; /* 00h */
@@ -2339,7 +2469,7 @@ typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
U8 PhysDiskNum; /* 05h */
U16 Reserved2; /* 06h */
U32 Reserved1; /* 08h */
- RAID_PHYS_DISK1_PATH Path[1]; /* 0Ch */
+ RAID_PHYS_DISK1_PATH Path[MPI_RAID_PHYS_DISK1_PATH_MAX];/* 0Ch */
} CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1,
RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t;
@@ -2464,6 +2594,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
#define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE (0x03)
#define MPI_SAS_IOUNIT0_RATE_1_5 (0x08)
#define MPI_SAS_IOUNIT0_RATE_3_0 (0x09)
+#define MPI_SAS_IOUNIT0_RATE_6_0 (0x0A)
/* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
@@ -2481,6 +2612,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
#define MPI_SAS_IOUNIT0_DS_TABLE_LINK (0x00000400)
#define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
#define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS (0x00001000)
+#define MPI_SAS_IOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000)
typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
@@ -2518,7 +2650,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
} CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
-#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x06)
+#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x07)
/* values for SAS IO Unit Page 1 ControlFlags */
#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
@@ -2544,7 +2676,14 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
/* values for SAS IO Unit Page 1 AdditionalControlFlags */
-#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
+#define MPI_SAS_IOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
+#define MPI_SAS_IOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
+#define MPI_SAS_IOUNIT1_ACONTROL_HIDE_NONZERO_ATTACHED_PHY_IDENT (0x0020)
+#define MPI_SAS_IOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
+#define MPI_SAS_IOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
+#define MPI_SAS_IOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
+#define MPI_SAS_IOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
+#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
#define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
@@ -2585,9 +2724,11 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
} CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
-#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x05)
+#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x06)
/* values for SAS IO Unit Page 2 Status field */
+#define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED (0x08)
+#define MPI_SAS_IOUNIT2_STATUS_ENCLOSURE_DEVICES_UNMAPPED (0x04)
#define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
#define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS (0x01)
@@ -2663,6 +2804,7 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_0
#define MPI_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800)
/* values for SAS Expander Page 0 Flags field */
+#define MPI_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x04)
#define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x02)
#define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x01)
@@ -2703,7 +2845,7 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_1
/* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */
/* values for SAS Expander Page 1 DiscoveryInfo field */
-#define MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY DISABLED (0x04)
+#define MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
#define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
#define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
@@ -2739,24 +2881,39 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_0
} CONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0,
SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t;
-#define MPI_SASDEVICE0_PAGEVERSION (0x04)
+#define MPI_SASDEVICE0_PAGEVERSION (0x05)
/* values for SAS Device Page 0 AccessStatus field */
-#define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
-#define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
-#define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
+#define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
+/* specific values for SATA Init failures */
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
/* values for SAS Device Page 0 Flags field */
-#define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
-#define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
-#define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
-#define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
-#define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
-#define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
-#define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
-#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x0004)
-#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x0002)
-#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
+#define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
+#define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
+#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x0004)
+#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x0002)
+#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
/* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */
@@ -2810,11 +2967,11 @@ typedef struct _CONFIG_PAGE_SAS_PHY_0
U8 AttachedPhyIdentifier; /* 16h */
U8 Reserved2; /* 17h */
U32 AttachedDeviceInfo; /* 18h */
- U8 ProgrammedLinkRate; /* 20h */
- U8 HwLinkRate; /* 21h */
- U8 ChangeCount; /* 22h */
- U8 Flags; /* 23h */
- U32 PhyInfo; /* 24h */
+ U8 ProgrammedLinkRate; /* 1Ch */
+ U8 HwLinkRate; /* 1Dh */
+ U8 ChangeCount; /* 1Eh */
+ U8 Flags; /* 1Fh */
+ U32 PhyInfo; /* 20h */
} CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0,
SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t;
diff --git a/drivers/message/fusion/lsi/mpi_fc.h b/drivers/message/fusion/lsi/mpi_fc.h
index 51a6aeb990b..7d663ce76f8 100644
--- a/drivers/message/fusion/lsi/mpi_fc.h
+++ b/drivers/message/fusion/lsi/mpi_fc.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2004 LSI Logic Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_fc.h
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 582cfe7c2aa..fa9249b4971 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -3,28 +3,28 @@
MPI Header File Change History
==============================
- Copyright (c) 2000-2005 LSI Logic Corporation.
+ Copyright (c) 2000-2008 LSI Corporation.
---------------------------------------
- Header Set Release Version: 01.05.13
- Header Set Release Date: 03-27-06
+ Header Set Release Version: 01.05.19
+ Header Set Release Date: 03-28-08
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
- mpi.h 01.05.11 01.05.10
- mpi_ioc.h 01.05.11 01.05.10
- mpi_cnfg.h 01.05.12 01.05.11
- mpi_init.h 01.05.07 01.05.06
- mpi_targ.h 01.05.06 01.05.05
+ mpi.h 01.05.16 01.05.15
+ mpi_ioc.h 01.05.16 01.05.15
+ mpi_cnfg.h 01.05.18 01.05.17
+ mpi_init.h 01.05.09 01.05.09
+ mpi_targ.h 01.05.06 01.05.06
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
- mpi_raid.h 01.05.02 01.05.02
+ mpi_raid.h 01.05.05 01.05.05
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
- mpi_sas.h 01.05.03 01.05.02
+ mpi_sas.h 01.05.05 01.05.05
mpi_type.h 01.05.02 01.05.02
- mpi_history.txt 01.05.13 01.05.12
+ mpi_history.txt 01.05.19 01.05.18
* Date Version Description
@@ -94,6 +94,11 @@ mpi.h
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
+ * 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
+ * 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT.
+ * 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT.
+ * 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT.
+ * 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
mpi_ioc.h
@@ -125,7 +130,7 @@ mpi_ioc.h
* 08-08-01 01.02.01 Original release for v1.2 work.
* New format for FWVersion and ProductId in
* MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- * 08-31-01 01.02.02 Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ * 08-31-01 01.02.02 Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
* related structure and defines.
* Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
* Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
@@ -182,6 +187,31 @@ mpi_ioc.h
* Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
* data structure.
* Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
+ * 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
+ * Added MaxInitiators field to PortFacts reply.
+ * Added SAS Device Status Change ReasonCode for
+ * asynchronous notification.
+ * Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
+ * data structure.
+ * Added new ImageType values for FWDownload and FWUpload
+ * requests.
+ * 02-28-07 01.05.13 Added MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT for SAS
+ * Broadcast Event Data (replacing _RESERVED2).
+ * For Discovery Error Event Data DiscoveryStatus field,
+ * replaced _MULTPL_PATHS with _UNSUPPORTED_DEVICE and
+ * added _MULTI_PORT_DOMAIN.
+ * 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request.
+ * Added Common Boot Block type to FWUpload Request.
+ * 08-07-07 01.05.15 Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ * Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ * MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ * Added SASAddress field to SAS Initiator Device Table
+ * Overflow event data structure.
+ * 03-28-08 01.05.16 Added two new ReasonCode values to SAS Device Status
+ * Change Event data to indicate completion of internally
+ * generated task management.
+ * Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ * Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
* --------------------------------------------------------------------------
mpi_cnfg.h
@@ -447,6 +477,52 @@ mpi_cnfg.h
* Added AdditionalControlFlags, MaxTargetPortConnectTime,
* ReportDeviceMissingDelay, and IODeviceMissingDelay
* fields to SAS IO Unit Page 1.
+ * 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to
+ * Manufacturing Page 5.
+ * Added Manufacturing pages 8 through 10.
+ * Added defines for supported metadata size bits in
+ * CapabilitiesFlags field of IOC Page 6.
+ * Added defines for metadata size bits in VolumeSettings
+ * field of RAID Volume Page 0.
+ * Added SATA Link Reset settings, Enable SATA Asynchronous
+ * Notification bit, and HideNonZeroAttachedPhyIdentifiers
+ * bit to AdditionalControlFlags field of SAS IO Unit
+ * Page 1.
+ * Added defines for Enclosure Devices Unmapped and
+ * Device Limit Exceeded bits in Status field of SAS IO
+ * Unit Page 2.
+ * Added more AccessStatus values for SAS Device Page 0.
+ * Added bit for SATA Asynchronous Notification Support in
+ * Flags field of SAS Device Page 0.
+ * 02-28-07 01.05.14 Added ExtFlags field to Manufacturing Page 4.
+ * Added Disable SMART Polling for CapabilitiesFlags of
+ * IOC Page 6.
+ * Added Disable SMART Polling to DeviceSettings of BIOS
+ * Page 1.
+ * Added Multi-Port Domain bit for DiscoveryStatus field
+ * of SAS IO Unit Page.
+ * Added Multi-Port Domain Illegal flag for SAS IO Unit
+ * Page 1 AdditionalControlFlags field.
+ * 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID
+ * Metadata bit to Manufacturing Page 4 ExtFlags field.
+ * Added Internal Connector to End Device Present bit to
+ * Expander Page 0 Flags field.
+ * Fixed define for
+ * MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ * define.
+ * Added BIOS Page 4 structure.
+ * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ * Physcial Disk Page 1.
+ * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of
+ * Manufacturing Page 4.
+ * Added Solid State Drives Supported bit to IOC Page 6
+ * Capabilities Flags.
+ * Added new value for AccessStatus field of SAS Device
+ * Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field
+ * to control coercion size and the mixing of SAS and SATA
+ * SSD drives.
* --------------------------------------------------------------------------
mpi_init.h
@@ -490,6 +566,9 @@ mpi_init.h
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
* unique in the first 32 characters.
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
+ * 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
+ * 02-28-07 01.05.09 Defined two new MsgFlags bits for SCSI Task Management
+ * Request: Do Not Send Task IU and Soft Reset Option.
* --------------------------------------------------------------------------
mpi_targ.h
@@ -544,7 +623,7 @@ mpi_fc.h
* 11-02-00 01.01.01 Original release for post 1.0 work
* 12-04-00 01.01.02 Added messages for Common Transport Send and
* Primitive Send.
- * 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix
+ * 01-09-01 01.01.03 Modified some of the new flags to have an MPI prefix
* and modified the FcPrimitiveSend flags.
* 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger
* field.
@@ -607,6 +686,11 @@ mpi_raid.h
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 01-15-05 01.05.02 Added defines for the two new RAID Actions for
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
+ * 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and
+ * associated defines.
+ * 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord
+ * for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ * 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
* --------------------------------------------------------------------------
mpi_tool.h
@@ -638,6 +722,12 @@ mpi_sas.h
* and Remove Device operations to SAS IO Unit Control.
* Added DevHandle field to SAS IO Unit Control request and
* reply.
+ * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
+ * Unit Control request.
+ * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ * including adding IOCParameter and IOCParameter value
+ * fields to SAS IO Unit Control Request.
+ * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
* --------------------------------------------------------------------------
mpi_type.h
@@ -653,20 +743,35 @@ mpi_type.h
mpi_history.txt Parts list history
-Filename 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
----------- -------- -------- -------- -------- --------
-mpi.h 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07
-mpi_ioc.h 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08
-mpi_cnfg.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08
-mpi_init.h 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04
-mpi_targ.h 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04
-mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
-mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
-mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
-mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
-mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
-mpi_sas.h 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01
-mpi_type.h 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
+Filename 01.05.19 01.05.18 01.05.17 01.05.16 01.05.15
+---------- -------- -------- -------- -------- --------
+mpi.h 01.05.16 01.05.15 01.05.14 01.05.13 01.05.12
+mpi_ioc.h 01.05.16 01.05.15 01.05.15 01.05.14 01.05.13
+mpi_cnfg.h 01.05.18 01.05.17 01.05.16 01.05.15 01.05.14
+mpi_init.h 01.05.09 01.05.09 01.05.09 01.05.09 01.05.09
+mpi_targ.h 01.05.06 01.05.06 01.05.06 01.05.06 01.05.06
+mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_raid.h 01.05.05 01.05.05 01.05.04 01.05.03 01.05.03
+mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
+mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_sas.h 01.05.05 01.05.05 01.05.04 01.05.04 01.05.04
+mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
+
+Filename 01.05.14 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
+---------- -------- -------- -------- -------- -------- --------
+mpi.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07
+mpi_ioc.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08
+mpi_cnfg.h 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08
+mpi_init.h 01.05.08 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04
+mpi_targ.h 01.05.06 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04
+mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
+mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
+mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_sas.h 01.05.04 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01
+mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
---------- -------- -------- -------- -------- -------- --------
diff --git a/drivers/message/fusion/lsi/mpi_inb.h b/drivers/message/fusion/lsi/mpi_inb.h
deleted file mode 100644
index ff167309ba2..00000000000
--- a/drivers/message/fusion/lsi/mpi_inb.h
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Copyright (c) 2003-2004 LSI Logic Corporation.
- *
- *
- * Name: mpi_inb.h
- * Title: MPI Inband structures and definitions
- * Creation Date: September 30, 2003
- *
- * mpi_inb.h Version: 01.05.01
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 05-11-04 01.03.01 Original release.
- * 08-19-04 01.05.01 Original release for MPI v1.5.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI_INB_H
-#define MPI_INB_H
-
-/******************************************************************************
-*
-* I n b a n d M e s s a g e s
-*
-*******************************************************************************/
-
-
-/****************************************************************************/
-/* Inband Buffer Post Request */
-/****************************************************************************/
-
-typedef struct _MSG_INBAND_BUFFER_POST_REQUEST
-{
- U8 Reserved1; /* 00h */
- U8 BufferCount; /* 01h */
- U8 ChainOffset; /* 02h */
- U8 Function; /* 03h */
- U16 Reserved2; /* 04h */
- U8 Reserved3; /* 06h */
- U8 MsgFlags; /* 07h */
- U32 MsgContext; /* 08h */
- U32 Reserved4; /* 0Ch */
- SGE_TRANS_SIMPLE_UNION SGL; /* 10h */
-} MSG_INBAND_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REQUEST,
- MpiInbandBufferPostRequest_t , MPI_POINTER pMpiInbandBufferPostRequest_t;
-
-
-typedef struct _WWN_FC_FORMAT
-{
- U64 NodeName; /* 00h */
- U64 PortName; /* 08h */
-} WWN_FC_FORMAT, MPI_POINTER PTR_WWN_FC_FORMAT,
- WwnFcFormat_t, MPI_POINTER pWwnFcFormat_t;
-
-typedef struct _WWN_SAS_FORMAT
-{
- U64 WorldWideID; /* 00h */
- U32 Reserved1; /* 08h */
- U32 Reserved2; /* 0Ch */
-} WWN_SAS_FORMAT, MPI_POINTER PTR_WWN_SAS_FORMAT,
- WwnSasFormat_t, MPI_POINTER pWwnSasFormat_t;
-
-typedef union _WWN_INBAND_FORMAT
-{
- WWN_FC_FORMAT Fc;
- WWN_SAS_FORMAT Sas;
-} WWN_INBAND_FORMAT, MPI_POINTER PTR_WWN_INBAND_FORMAT,
- WwnInbandFormat, MPI_POINTER pWwnInbandFormat;
-
-
-/* Inband Buffer Post reply message */
-
-typedef struct _MSG_INBAND_BUFFER_POST_REPLY
-{
- U16 Reserved1; /* 00h */
- U8 MsgLength; /* 02h */
- U8 Function; /* 03h */
- U16 Reserved2; /* 04h */
- U8 Reserved3; /* 06h */
- U8 MsgFlags; /* 07h */
- U32 MsgContext; /* 08h */
- U16 Reserved4; /* 0Ch */
- U16 IOCStatus; /* 0Eh */
- U32 IOCLogInfo; /* 10h */
- U32 TransferLength; /* 14h */
- U32 TransactionContext; /* 18h */
- WWN_INBAND_FORMAT Wwn; /* 1Ch */
- U32 IOCIdentifier[4]; /* 2Ch */
-} MSG_INBAND_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REPLY,
- MpiInbandBufferPostReply_t, MPI_POINTER pMpiInbandBufferPostReply_t;
-
-
-/****************************************************************************/
-/* Inband Send Request */
-/****************************************************************************/
-
-typedef struct _MSG_INBAND_SEND_REQUEST
-{
- U16 Reserved1; /* 00h */
- U8 ChainOffset; /* 02h */
- U8 Function; /* 03h */
- U16 Reserved2; /* 04h */
- U8 Reserved3; /* 06h */
- U8 MsgFlags; /* 07h */
- U32 MsgContext; /* 08h */
- U32 Reserved4; /* 0Ch */
- WWN_INBAND_FORMAT Wwn; /* 10h */
- U32 Reserved5; /* 20h */
- SGE_IO_UNION SGL; /* 24h */
-} MSG_INBAND_SEND_REQUEST, MPI_POINTER PTR_MSG_INBAND_SEND_REQUEST,
- MpiInbandSendRequest_t , MPI_POINTER pMpiInbandSendRequest_t;
-
-
-/* Inband Send reply message */
-
-typedef struct _MSG_INBAND_SEND_REPLY
-{
- U16 Reserved1; /* 00h */
- U8 MsgLength; /* 02h */
- U8 Function; /* 03h */
- U16 Reserved2; /* 04h */
- U8 Reserved3; /* 06h */
- U8 MsgFlags; /* 07h */
- U32 MsgContext; /* 08h */
- U16 Reserved4; /* 0Ch */
- U16 IOCStatus; /* 0Eh */
- U32 IOCLogInfo; /* 10h */
- U32 ResponseLength; /* 14h */
-} MSG_INBAND_SEND_REPLY, MPI_POINTER PTR_MSG_INBAND_SEND_REPLY,
- MpiInbandSendReply_t, MPI_POINTER pMpiInbandSendReply_t;
-
-
-/****************************************************************************/
-/* Inband Response Request */
-/****************************************************************************/
-
-typedef struct _MSG_INBAND_RSP_REQUEST
-{
- U16 Reserved1; /* 00h */
- U8 ChainOffset; /* 02h */
- U8 Function; /* 03h */
- U16 Reserved2; /* 04h */
- U8 Reserved3; /* 06h */
- U8 MsgFlags; /* 07h */
- U32 MsgContext; /* 08h */
- U32 Reserved4; /* 0Ch */
- WWN_INBAND_FORMAT Wwn; /* 10h */
- U32 IOCIdentifier[4]; /* 20h */
- U32 ResponseLength; /* 30h */
- SGE_IO_UNION SGL; /* 34h */
-} MSG_INBAND_RSP_REQUEST, MPI_POINTER PTR_MSG_INBAND_RSP_REQUEST,
- MpiInbandRspRequest_t , MPI_POINTER pMpiInbandRspRequest_t;
-
-
-/* Inband Response reply message */
-
-typedef struct _MSG_INBAND_RSP_REPLY
-{
- U16 Reserved1; /* 00h */
- U8 MsgLength; /* 02h */
- U8 Function; /* 03h */
- U16 Reserved2; /* 04h */
- U8 Reserved3; /* 06h */
- U8 MsgFlags; /* 07h */
- U32 MsgContext; /* 08h */
- U16 Reserved4; /* 0Ch */
- U16 IOCStatus; /* 0Eh */
- U32 IOCLogInfo; /* 10h */
-} MSG_INBAND_RSP_REPLY, MPI_POINTER PTR_MSG_INBAND_RSP_REPLY,
- MpiInbandRspReply_t, MPI_POINTER pMpiInbandRspReply_t;
-
-
-/****************************************************************************/
-/* Inband Abort Request */
-/****************************************************************************/
-
-typedef struct _MSG_INBAND_ABORT_REQUEST
-{
- U8 Reserved1; /* 00h */
- U8 AbortType; /* 01h */
- U8 ChainOffset; /* 02h */
- U8 Function; /* 03h */
- U16 Reserved2; /* 04h */
- U8 Reserved3; /* 06h */
- U8 MsgFlags; /* 07h */
- U32 MsgContext; /* 08h */
- U32 Reserved4; /* 0Ch */
- U32 ContextToAbort; /* 10h */
-} MSG_INBAND_ABORT_REQUEST, MPI_POINTER PTR_MSG_INBAND_ABORT_REQUEST,
- MpiInbandAbortRequest_t , MPI_POINTER pMpiInbandAbortRequest_t;
-
-#define MPI_INBAND_ABORT_TYPE_ALL_BUFFERS (0x00)
-#define MPI_INBAND_ABORT_TYPE_EXACT_BUFFER (0x01)
-#define MPI_INBAND_ABORT_TYPE_SEND_REQUEST (0x02)
-#define MPI_INBAND_ABORT_TYPE_RESPONSE_REQUEST (0x03)
-
-
-/* Inband Abort reply message */
-
-typedef struct _MSG_INBAND_ABORT_REPLY
-{
- U8 Reserved1; /* 00h */
- U8 AbortType; /* 01h */
- U8 MsgLength; /* 02h */
- U8 Function; /* 03h */
- U16 Reserved2; /* 04h */
- U8 Reserved3; /* 06h */
- U8 MsgFlags; /* 07h */
- U32 MsgContext; /* 08h */
- U16 Reserved4; /* 0Ch */
- U16 IOCStatus; /* 0Eh */
- U32 IOCLogInfo; /* 10h */
-} MSG_INBAND_ABORT_REPLY, MPI_POINTER PTR_MSG_INBAND_ABORT_REPLY,
- MpiInbandAbortReply_t, MPI_POINTER pMpiInbandAbortReply_t;
-
-
-#endif
-
diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h
index c1c678989a2..4295d062caa 100644
--- a/drivers/message/fusion/lsi/mpi_init.h
+++ b/drivers/message/fusion/lsi/mpi_init.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2005 LSI Logic Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_init.h
* Title: MPI initiator mode messages and structures
* Creation Date: June 8, 2000
*
- * mpi_init.h Version: 01.05.07
+ * mpi_init.h Version: 01.05.09
*
* Version History
* ---------------
@@ -53,6 +53,9 @@
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
* unique in the first 32 characters.
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
+ * 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
+ * 02-28-07 01.05.09 Defined two new MsgFlags bits for SCSI Task Management
+ * Request: Do Not Send Task IU and Soft Reset Option.
* --------------------------------------------------------------------------
*/
@@ -428,13 +431,17 @@ typedef struct _MSG_SCSI_TASK_MGMT
#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
#define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
-#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08)
+#define MPI_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
/* MsgFlags bits */
+#define MPI_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
+
#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00)
#define MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION (0x02)
#define MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION (0x04)
+#define MPI_SCSITASKMGMT_MSGFLAGS_SOFT_RESET_OPTION (0x08)
+
/* SCSI Task Management Reply */
typedef struct _MSG_SCSI_TASK_MGMT_REPLY
{
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index 18ba407fd39..19fb21b8f0c 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2005 LSI Logic Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: August 11, 2000
*
- * mpi_ioc.h Version: 01.05.11
+ * mpi_ioc.h Version: 01.05.16
*
* Version History
* ---------------
@@ -98,6 +98,31 @@
* Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
* data structure.
* Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
+ * 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
+ * Added MaxInitiators field to PortFacts reply.
+ * Added SAS Device Status Change ReasonCode for
+ * asynchronous notificaiton.
+ * Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
+ * data structure.
+ * Added new ImageType values for FWDownload and FWUpload
+ * requests.
+ * 02-28-07 01.05.13 Added MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT for SAS
+ * Broadcast Event Data (replacing _RESERVED2).
+ * For Discovery Error Event Data DiscoveryStatus field,
+ * replaced _MULTPL_PATHS with _UNSUPPORTED_DEVICE and
+ * added _MULTI_PORT_DOMAIN.
+ * 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request.
+ * Added Common Boot Block type to FWUpload Request.
+ * 08-07-07 01.05.15 Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ * Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ * MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ * Added SASAddress field to SAS Initiator Device Table
+ * Overflow event data structure.
+ * 03-28-08 01.05.16 Added two new ReasonCode values to SAS Device Status
+ * Change Event data to indicate completion of internally
+ * generated task management.
+ * Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ * Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
* --------------------------------------------------------------------------
*/
@@ -264,6 +289,7 @@ typedef struct _MSG_IOC_FACTS_REPLY
#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL (0x0008)
+#define MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01)
#define MPI_IOCFACTS_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02)
@@ -328,7 +354,8 @@ typedef struct _MSG_PORT_FACTS_REPLY
U16 MaxPostedCmdBuffers; /* 1Ch */
U16 MaxPersistentIDs; /* 1Eh */
U16 MaxLanBuckets; /* 20h */
- U16 Reserved4; /* 22h */
+ U8 MaxInitiators; /* 22h */
+ U8 Reserved4; /* 23h */
U32 Reserved5; /* 24h */
} MSG_PORT_FACTS_REPLY, MPI_POINTER PTR_MSG_PORT_FACTS_REPLY,
PortFactsReply_t, MPI_POINTER pPortFactsReply_t;
@@ -487,6 +514,7 @@ typedef struct _MSG_EVENT_ACK_REPLY
#define MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x00000018)
#define MPI_EVENT_SAS_INIT_TABLE_OVERFLOW (0x00000019)
#define MPI_EVENT_SAS_SMP_ERROR (0x0000001A)
+#define MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE (0x0000001B)
#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021)
/* AckRequired field values */
@@ -593,6 +621,9 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
#define MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
+#define MPI_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_INTERNAL_DEV_RESET (0x0E)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_TASK_ABORT_INTERNAL (0x0F)
/* SCSI Event data for Queue Full event */
@@ -689,6 +720,8 @@ typedef struct _MPI_EVENT_DATA_IR2
#define MPI_EVENT_IR2_RC_PD_REMOVED (0x05)
#define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED (0x06)
#define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR (0x07)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_ADDED (0x08)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED (0x09)
/* defines for logical disk states */
#define MPI_LD_STATE_OPTIMAL (0x00)
@@ -780,7 +813,7 @@ typedef struct _EVENT_DATA_SAS_BROADCAST_PRIMITIVE
#define MPI_EVENT_PRIMITIVE_CHANGE (0x01)
#define MPI_EVENT_PRIMITIVE_EXPANDER (0x03)
-#define MPI_EVENT_PRIMITIVE_RESERVED2 (0x04)
+#define MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
#define MPI_EVENT_PRIMITIVE_RESERVED3 (0x05)
#define MPI_EVENT_PRIMITIVE_RESERVED4 (0x06)
#define MPI_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
@@ -808,6 +841,7 @@ typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS
#define MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE (0x03)
#define MPI_EVENT_SAS_PLS_LR_RATE_1_5 (0x08)
#define MPI_EVENT_SAS_PLS_LR_RATE_3_0 (0x09)
+#define MPI_EVENT_SAS_PLS_LR_RATE_6_0 (0x0A)
/* SAS Discovery Event data */
@@ -823,7 +857,7 @@ typedef struct _EVENT_DATA_SAS_DISCOVERY
#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK (0xFFFF0000)
#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT (16)
-/* SAS Discovery Errror Event data */
+/* SAS Discovery Error Event data */
typedef struct _EVENT_DATA_DISCOVERY_ERROR
{
@@ -845,8 +879,10 @@ typedef struct _EVENT_DATA_DISCOVERY_ERROR
#define MPI_EVENT_DSCVRY_ERR_DS_SMP_CRC_ERROR (0x00000100)
#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_SUBTRACTIVE (0x00000200)
#define MPI_EVENT_DSCVRY_ERR_DS_TABLE_TO_TABLE (0x00000400)
-#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS (0x00000800)
+#define MPI_EVENT_DSCVRY_ERR_DS_UNSUPPORTED_DEVICE (0x00000800)
#define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000)
+#define MPI_EVENT_DSCVRY_ERR_DS_MULTI_PORT_DOMAIN (0x00002000)
+#define MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE (0x00004000)
/* SAS SMP Error Event data */
@@ -882,6 +918,8 @@ typedef struct _EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE
/* defines for the ReasonCode field of the SAS Initiator Device Status Change event */
#define MPI_EVENT_SAS_INIT_RC_ADDED (0x01)
+#define MPI_EVENT_SAS_INIT_RC_REMOVED (0x02)
+#define MPI_EVENT_SAS_INIT_RC_INACCESSIBLE (0x03)
/* SAS Initiator Device Table Overflow Event data */
@@ -890,11 +928,60 @@ typedef struct _EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
U8 MaxInit; /* 00h */
U8 CurrentInit; /* 01h */
U16 Reserved1; /* 02h */
+ U64 SASAddress; /* 04h */
} EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
MpiEventDataSasInitTableOverflow_t,
MPI_POINTER pMpiEventDataSasInitTableOverflow_t;
+/* SAS Expander Status Change Event data */
+
+typedef struct _EVENT_DATA_SAS_EXPANDER_STATUS_CHANGE
+{
+ U8 ReasonCode; /* 00h */
+ U8 Reserved1; /* 01h */
+ U16 Reserved2; /* 02h */
+ U8 PhysicalPort; /* 04h */
+ U8 Reserved3; /* 05h */
+ U16 EnclosureHandle; /* 06h */
+ U64 SASAddress; /* 08h */
+ U32 DiscoveryStatus; /* 10h */
+ U16 DevHandle; /* 14h */
+ U16 ParentDevHandle; /* 16h */
+ U16 ExpanderChangeCount; /* 18h */
+ U16 ExpanderRouteIndexes; /* 1Ah */
+ U8 NumPhys; /* 1Ch */
+ U8 SASLevel; /* 1Dh */
+ U8 Flags; /* 1Eh */
+ U8 Reserved4; /* 1Fh */
+} EVENT_DATA_SAS_EXPANDER_STATUS_CHANGE,
+ MPI_POINTER PTR_EVENT_DATA_SAS_EXPANDER_STATUS_CHANGE,
+ MpiEventDataSasExpanderStatusChange_t,
+ MPI_POINTER pMpiEventDataSasExpanderStatusChange_t;
+
+/* values for ReasonCode field of SAS Expander Status Change Event data */
+#define MPI_EVENT_SAS_EXP_RC_ADDED (0x00)
+#define MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING (0x01)
+
+/* values for DiscoveryStatus field of SAS Expander Status Change Event data */
+#define MPI_EVENT_SAS_EXP_DS_LOOP_DETECTED (0x00000001)
+#define MPI_EVENT_SAS_EXP_DS_UNADDRESSABLE_DEVICE (0x00000002)
+#define MPI_EVENT_SAS_EXP_DS_MULTIPLE_PORTS (0x00000004)
+#define MPI_EVENT_SAS_EXP_DS_EXPANDER_ERR (0x00000008)
+#define MPI_EVENT_SAS_EXP_DS_SMP_TIMEOUT (0x00000010)
+#define MPI_EVENT_SAS_EXP_DS_OUT_ROUTE_ENTRIES (0x00000020)
+#define MPI_EVENT_SAS_EXP_DS_INDEX_NOT_EXIST (0x00000040)
+#define MPI_EVENT_SAS_EXP_DS_SMP_FUNCTION_FAILED (0x00000080)
+#define MPI_EVENT_SAS_EXP_DS_SMP_CRC_ERROR (0x00000100)
+#define MPI_EVENT_SAS_EXP_DS_SUBTRACTIVE_LINK (0x00000200)
+#define MPI_EVENT_SAS_EXP_DS_TABLE_LINK (0x00000400)
+#define MPI_EVENT_SAS_EXP_DS_UNSUPPORTED_DEVICE (0x00000800)
+
+/* values for Flags field of SAS Expander Status Change Event data */
+#define MPI_EVENT_SAS_EXP_FLAGS_ROUTE_TABLE_CONFIG (0x02)
+#define MPI_EVENT_SAS_EXP_FLAGS_CONFIG_IN_PROGRESS (0x01)
+
+
/*****************************************************************************
*
@@ -926,6 +1013,11 @@ typedef struct _MSG_FW_DOWNLOAD
#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02)
#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03)
#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER (0x04)
+#define MPI_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
+#define MPI_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
+#define MPI_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
+#define MPI_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
+#define MPI_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
typedef struct _FWDownloadTCSGE
@@ -974,12 +1066,18 @@ typedef struct _MSG_FW_UPLOAD
} MSG_FW_UPLOAD, MPI_POINTER PTR_MSG_FW_UPLOAD,
FWUpload_t, MPI_POINTER pFWUpload_t;
-#define MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM (0x00)
-#define MPI_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
-#define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
-#define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03)
-#define MPI_FW_UPLOAD_ITYPE_BOOTLOADER (0x04)
-#define MPI_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
+#define MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM (0x00)
+#define MPI_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
+#define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
+#define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03)
+#define MPI_FW_UPLOAD_ITYPE_BOOTLOADER (0x04)
+#define MPI_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
+#define MPI_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
+#define MPI_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
+#define MPI_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
+#define MPI_FW_UPLOAD_ITYPE_MEGARAID (0x09)
+#define MPI_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
+#define MPI_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
typedef struct _FWUploadTCSGE
{
diff --git a/drivers/message/fusion/lsi/mpi_lan.h b/drivers/message/fusion/lsi/mpi_lan.h
index dc0b52ae83d..f41fcb69b35 100644
--- a/drivers/message/fusion/lsi/mpi_lan.h
+++ b/drivers/message/fusion/lsi/mpi_lan.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2004 LSI Logic Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_lan.h
diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h
index dc98d46f907..03be8b21770 100644
--- a/drivers/message/fusion/lsi/mpi_log_fc.h
+++ b/drivers/message/fusion/lsi/mpi_log_fc.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved.
+ * Copyright (c) 2000-2008 LSI Corporation. All rights reserved.
*
* NAME: fc_log.h
* SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips
@@ -38,8 +38,8 @@ typedef enum _MpiIocLogInfoFc
{
MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000,
MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
- MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
- MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primitive */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primitive */
MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */
MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */
MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 871ebc08b70..f62960b5d52 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -1,7 +1,6 @@
-
/***************************************************************************
* *
- * Copyright 2003 LSI Logic Corporation. All rights reserved. *
+ * Copyright (c) 2000-2008 LSI Corporation. All rights reserved. *
* *
* Description *
* ------------ *
@@ -14,7 +13,7 @@
#define IOPI_IOCLOGINFO_H_INCLUDED
#define SAS_LOGINFO_NEXUS_LOSS 0x31170000
-#define SAS_LOGINFO_MASK 0xFFFF0000
+#define SAS_LOGINFO_MASK 0xFFFF0000
/****************************************************************************/
/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */
@@ -43,129 +42,180 @@
/****************************************************************************/
/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP */
/****************************************************************************/
-#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000)
-#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000)
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000)
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
-
-#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */
-
-#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
-
-#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */
-#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
-
-#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001)
-#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002)
-#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003)
-#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
-#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
+#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000)
+#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
+
+#define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE (0x0003E000) /* Tried to upload from flash, but there is none */
+#define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE (0x0003E001) /* ImageType field contents were invalid */
+#define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
+#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occurred while attempting to upload the entire flash */
+#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occurred while attempting to upload single flash region */
+#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occurred while DMAing FW to host memory */
+
+#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */
+
+#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
+
+#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */
+#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
+
+#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001)
+#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
+
+#define IOP_LOGINFO_CODE_LOG_TIMESTAMP_EVENT (0x00080000)
/****************************************************************************/
/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */
/****************************************************************************/
-#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000)
-#define PL_LOG_INFO_CODE_OPEN_FAILURE_NO_DEST_TIME_OUT (0x00010001)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_BAD_DESTINATION (0x00010011)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_PROTOCOL_NOT_SUPPORTED (0x00010013)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_STP_RESOURCES_BSY (0x00010018)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_WRONG_DESTINATION (0x00010019)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_ORR_TIMEOUT (0X0001001A)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0001001B)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_AWT_MAXED (0x0001001C)
-#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
-#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
-#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
-#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000)
-#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000)
-#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000)
-#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000)
-#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000)
-#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000)
-#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000)
-#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000)
-#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
-#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
-#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
-#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
-#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below */
-#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below */
-#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
-#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
-#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000)
-#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000)
-#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000)
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101)
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0000011B)
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */
-
-#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120)
-#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */
-#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */
-
-
-#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
-#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
-#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
-#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
-#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
-#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700)
-#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
-#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
-#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00)
-#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00)
-#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
-#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
-#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
-#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
-#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
-#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
-
-
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */
-#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
-#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
-#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */
-#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */
-#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */
-
-#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
-#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
-#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
-#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
-#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
-#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */
-#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode */
+#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000) /* see SUB_CODE_OPEN_FAIL_ below */
+
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_NO_DEST_TIME_OUT (0x00000001)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATHWAY_BLOCKED (0x00000002)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE0 (0x00000003)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE1 (0x00000004)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE0 (0x00000005)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE1 (0x00000006)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP0 (0x00000007)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP1 (0x00000008)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RETRY (0x00000009)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BREAK (0x0000000A)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0B (0x0000000B)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP (0x0000000C)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D (0x0000000D)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL (0x0000000E)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BAD_DEST (0x00000011)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP (0x00000012)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP (0x00000013)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0 (0x00000014)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON1 (0x00000015)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON2 (0x00000016)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON3 (0x00000017)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_STP_RESOURCES_BSY (0x00000018)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_WRONG_DESTINATION (0x00000019)
+
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATH_BLOCKED (0x0000001B) /* Retry Timeout */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_AWT_MAXED (0x0000001C) /* Retry Timeout */
+
+
+
+#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
+#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
+#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
+#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000)
+#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000)
+#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000)
+#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000)
+#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000)
+#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000)
+#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000)
+#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000)
+#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
+#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
+#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
+#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
+#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below (PL_LOGINFO_SUB_CODE) */
+#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below (PL_LOGINFO_SUB_CODE)*/
+#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
+#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
+#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000)
+#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000)
+#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000)
+#define PL_LOGINFO_CODE_IO_CANCELLED_DUE_TO_R_ERR (0x00180000)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_SATA_NEG_RATE_2HI (0x00000102)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_RATE_NOT_SUPPORTED (0x00000103)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_BREAK (0x00000104)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ZONE_VIOLATION (0x00000114)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON0 (0x00000114) /* Open Reject (Zone Violation) - available on SAS-2 devices */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON1 (0x00000115)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON2 (0x00000116)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON3 (0x00000117)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATH_BLOCKED (0x0000011B)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */
+
+#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120)
+#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */
+#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */
+
+
+#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
+#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
+#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
+/* Bits 0-3 encode Transport Status Register (offset 0x08) */
+/* Bit 0 is Status Bit 0: FrameXferErr */
+/* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
+/* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
+
+#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
+#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
+#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700)
+#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
+#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
+#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00)
+#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00)
+#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
+#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
+#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
+#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_SATA_CONNECTION (0x00002000)
+/* not currently used in mainline */
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK (0x00003000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK_AIP (0x00004000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD (0x00005000)
+
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occurred on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occurred on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
+#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
+#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */
+
+#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
+#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
+#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
+#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
+#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
+#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transferring data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transferring sense data */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode f/w location 1 */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_2 (0x0020010D) /* SEP doesn't support CDB opcode f/w location 2 */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_3 (0x0020010E) /* SEP doesn't support CDB opcode f/w location 3 */
/****************************************************************************/
@@ -201,6 +251,8 @@
#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED (0x00010014)
/* Activation failed trying to import the volume */
#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED (0x00010015)
+/* Activation failed trying to import the volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_PHYS_DISKS (0x00010016)
/* Phys Disk failed, too many phys disks */
#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS (0x00010020)
@@ -216,7 +268,7 @@
/* Compatibility Error : IR Disabled */
#define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED (0x00010030)
-/* Compatibility Error : Inquiry Comand failed */
+/* Compatibility Error : Inquiry Command failed */
#define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED (0x00010031)
/* Compatibility Error : Device not direct access device */
#define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS (0x00010032)
@@ -243,6 +295,21 @@
/* Compatibility Error : IME size limited to < 2TB */
#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D)
+/* Device Firmware Update: DFU can only be started once */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DFU_IN_PROGRESS (0x00010050)
+/* Device Firmware Update: Volume must be Optimal/Active/non-Quiesced */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DEVICE_IN_INVALID_STATE (0x00010051)
+/* Device Firmware Update: DFU Timeout cannot be zero */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_INVALID_TIMEOUT (0x00010052)
+/* Device Firmware Update: CREATE TIMER FAILED */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_NO_TIMERS (0x00010053)
+/* Device Firmware Update: Failed to read SAS_IO_UNIT_PG_1 */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_READING_CFG_PAGE (0x00010054)
+/* Device Firmware Update: Invalid SAS_IO_UNIT_PG_1 value(s) */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_PORT_IO_TIMEOUTS_REQUIRED (0x00010055)
+/* Device Firmware Update: Unable to allocate memory for page */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_ALLOC_CFG_PAGE (0x00010056)
+
/****************************************************************************/
/* Defines for convenience */
diff --git a/drivers/message/fusion/lsi/mpi_raid.h b/drivers/message/fusion/lsi/mpi_raid.h
index 802255d2747..add60cc85be 100644
--- a/drivers/message/fusion/lsi/mpi_raid.h
+++ b/drivers/message/fusion/lsi/mpi_raid.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2001-2005 LSI Logic Corporation.
+ * Copyright (c) 2001-2008 LSI Corporation.
*
*
* Name: mpi_raid.h
* Title: MPI RAID message and structures
* Creation Date: February 27, 2001
*
- * mpi_raid.h Version: 01.05.02
+ * mpi_raid.h Version: 01.05.05
*
* Version History
* ---------------
@@ -32,6 +32,11 @@
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 01-15-05 01.05.02 Added defines for the two new RAID Actions for
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
+ * 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and
+ * associated defines.
+ * 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord
+ * for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ * 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
* --------------------------------------------------------------------------
*/
@@ -90,6 +95,8 @@ typedef struct _MSG_RAID_ACTION
#define MPI_RAID_ACTION_INACTIVATE_VOLUME (0x12)
#define MPI_RAID_ACTION_SET_RESYNC_RATE (0x13)
#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE (0x14)
+#define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15)
+#define MPI_RAID_ACTION_SET_VOLUME_NAME (0x16)
/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001)
@@ -102,6 +109,9 @@ typedef struct _MSG_RAID_ACTION
#define MPI_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
#define MPI_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000002)
+/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */
+#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD (0x00000001)
+
/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001)
@@ -111,6 +121,10 @@ typedef struct _MSG_RAID_ACTION
/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_DATA_SCRUB_RATE action */
#define MPI_RAID_ACTION_ADATA_DATA_SCRUB_RATE_MASK (0x000000FF)
+/* ActionDataWord defines for use with MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
+#define MPI_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x00000001)
+#define MPI_RAID_ACTION_ADATA_MASK_FW_UPDATE_TIMEOUT (0x0000FF00)
+#define MPI_RAID_ACTION_ADATA_SHIFT_FW_UPDATE_TIMEOUT (8)
/* RAID Action reply message */
diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h
index 50b8f0a8f45..ab410036bbf 100644
--- a/drivers/message/fusion/lsi/mpi_sas.h
+++ b/drivers/message/fusion/lsi/mpi_sas.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2004 LSI Logic Corporation.
+ * Copyright (c) 2004-2008 LSI Corporation.
*
*
* Name: mpi_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: August 19, 2004
*
- * mpi_sas.h Version: 01.05.03
+ * mpi_sas.h Version: 01.05.05
*
* Version History
* ---------------
@@ -21,6 +21,12 @@
* and Remove Device operations to SAS IO Unit Control.
* Added DevHandle field to SAS IO Unit Control request and
* reply.
+ * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
+ * Unit Control request.
+ * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ * including adding IOCParameter and IOCParameter value
+ * fields to SAS IO Unit Control Request.
+ * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
* --------------------------------------------------------------------------
*/
@@ -58,6 +64,8 @@
* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
* data and SAS IO Unit Configuration pages.
*/
+#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000)
+
#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
@@ -214,7 +222,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
- U8 Reserved3; /* 06h */
+ U8 IOCParameter; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 TargetID; /* 0Ch */
@@ -223,7 +231,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
U8 PrimFlags; /* 0Fh */
U32 Primitive; /* 10h */
U64 SASAddress; /* 14h */
- U32 Reserved4; /* 1Ch */
+ U32 IOCParameterValue; /* 1Ch */
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
@@ -237,7 +245,10 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
-#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D)
+#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */
+#define MPI_SAS_OP_REMOVE_DEVICE (0x0D)
+#define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E)
+#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
/* values for the PrimFlags field */
#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
@@ -253,7 +264,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
- U8 Reserved3; /* 06h */
+ U8 IOCParameter; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved4; /* 0Ch */
diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h
index 20b66731577..c3dea7f6909 100644
--- a/drivers/message/fusion/lsi/mpi_targ.h
+++ b/drivers/message/fusion/lsi/mpi_targ.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2004 LSI Logic Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_targ.h
diff --git a/drivers/message/fusion/lsi/mpi_tool.h b/drivers/message/fusion/lsi/mpi_tool.h
index aa9053da1f5..53cd715aa7e 100644
--- a/drivers/message/fusion/lsi/mpi_tool.h
+++ b/drivers/message/fusion/lsi/mpi_tool.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2001-2005 LSI Logic Corporation.
+ * Copyright (c) 2001-2008 LSI Corporation.
*
*
* Name: mpi_tool.h
diff --git a/drivers/message/fusion/lsi/mpi_type.h b/drivers/message/fusion/lsi/mpi_type.h
index 32cc9b1151b..888b26dbc41 100644
--- a/drivers/message/fusion/lsi/mpi_type.h
+++ b/drivers/message/fusion/lsi/mpi_type.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2004 LSI Logic Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_type.h
* Title: MPI Basic type definitions
* Creation Date: June 6, 2000
*
- * mpi_type.h Version: 01.05.01
+ * mpi_type.h Version: 01.05.02
*
* Version History
* ---------------
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-06 10:36:47 +0000