diff options
Diffstat (limited to 'drivers/media/usb/gspca/sonixb.c')
| -rw-r--r-- | drivers/media/usb/gspca/sonixb.c | 42 |
1 files changed, 11 insertions, 31 deletions
diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c index 1220340e760..ecbcb39feb7 100644 --- a/drivers/media/usb/gspca/sonixb.c +++ b/drivers/media/usb/gspca/sonixb.c @@ -513,10 +513,7 @@ static void i2c_w(struct gspca_dev *gspca_dev, const u8 *buf) if (gspca_dev->usb_buf[0] & 0x04) { if (gspca_dev->usb_buf[0] & 0x08) { dev_err(gspca_dev->v4l2_dev.dev, - "i2c error writing %02x %02x %02x %02x" - " %02x %02x %02x %02x\n", - buf[0], buf[1], buf[2], buf[3], - buf[4], buf[5], buf[6], buf[7]); + "i2c error writing %8ph\n", buf); gspca_dev->usb_err = -EIO; } return; @@ -753,7 +750,7 @@ static void setexposure(struct gspca_dev *gspca_dev) /* In 640x480, if the reg11 has less than 4, the image is unstable (the bridge goes into a higher compression mode which we have not reverse engineered yet). */ - if (gspca_dev->width == 640 && reg11 < 4) + if (gspca_dev->pixfmt.width == 640 && reg11 < 4) reg11 = 4; /* frame exposure time in ms = 1000 * reg11 / 30 -> @@ -1159,6 +1156,13 @@ static int sd_start(struct gspca_dev *gspca_dev) regs[0x01] = 0x44; /* Select 24 Mhz clock */ regs[0x12] = 0x02; /* Set hstart to 2 */ } + break; + case SENSOR_PAS202: + /* For some unknown reason we need to increase hstart by 1 on + the sn9c103, otherwise we get wrong colors (bayer shift). */ + if (sd->bridge == BRIDGE_103) + regs[0x12] += 1; + break; } /* Disable compression when the raw bayer format has been selected */ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) @@ -1379,28 +1383,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, } } -static int sd_querymenu(struct gspca_dev *gspca_dev, - struct v4l2_querymenu *menu) -{ - switch (menu->id) { - case V4L2_CID_POWER_LINE_FREQUENCY: - switch (menu->index) { - case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ - strcpy((char *) menu->name, "NoFliker"); - return 0; - case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ - strcpy((char *) menu->name, "50 Hz"); - return 0; - case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ - strcpy((char *) menu->name, "60 Hz"); - return 0; - } - break; - } - return -EINVAL; -} - -#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) +#if IS_ENABLED(CONFIG_INPUT) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet data */ int len) /* interrupt packet length */ @@ -1428,9 +1411,8 @@ static const struct sd_desc sd_desc = { .start = sd_start, .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, - .querymenu = sd_querymenu, .dq_callback = do_autogain, -#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) +#if IS_ENABLED(CONFIG_INPUT) .int_pkt_scan = sd_int_pkt_scan, #endif }; @@ -1448,10 +1430,8 @@ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)}, {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)}, {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)}, {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)}, -#endif {USB_DEVICE(0x0c45, 0x6027), SB(OV7630, 101)}, /* Genius Eye 310 */ {USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)}, {USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)}, |