diff options
Diffstat (limited to 'drivers/media/usb/dvb-usb-v2/af9035.c')
| -rw-r--r-- | drivers/media/usb/dvb-usb-v2/af9035.c | 252 |
1 files changed, 159 insertions, 93 deletions
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index b638fc1cd57..7b9b75f6077 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -21,6 +21,9 @@ #include "af9035.h" +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static u16 af9035_checksum(const u8 *buf, size_t len) @@ -55,7 +58,7 @@ static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) || req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) { dev_err(&d->udev->dev, "%s: too much data wlen=%d rlen=%d\n", - __func__, req->wlen, req->rlen); + KBUILD_MODNAME, req->wlen, req->rlen); ret = -EINVAL; goto exit; } @@ -91,9 +94,10 @@ static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) checksum = af9035_checksum(state->buf, rlen - 2); tmp_checksum = (state->buf[rlen - 2] << 8) | state->buf[rlen - 1]; if (tmp_checksum != checksum) { - dev_err(&d->udev->dev, "%s: command=%02x checksum mismatch " \ - "(%04x != %04x)\n", KBUILD_MODNAME, req->cmd, - tmp_checksum, checksum); + dev_err(&d->udev->dev, + "%s: command=%02x checksum mismatch (%04x != %04x)\n", + KBUILD_MODNAME, req->cmd, tmp_checksum, + checksum); ret = -EIO; goto exit; } @@ -125,9 +129,15 @@ exit: /* write multiple registers */ static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) { - u8 wbuf[6 + len]; + u8 wbuf[MAX_XFER_SIZE]; u8 mbox = (reg >> 16) & 0xff; - struct usb_req req = { CMD_MEM_WR, mbox, sizeof(wbuf), wbuf, 0, NULL }; + struct usb_req req = { CMD_MEM_WR, mbox, 6 + len, wbuf, 0, NULL }; + + if (6 + len > sizeof(wbuf)) { + dev_warn(&d->udev->dev, "%s: i2c wr: len=%d is too big!\n", + KBUILD_MODNAME, len); + return -EOPNOTSUPP; + } wbuf[0] = len; wbuf[1] = 2; @@ -227,9 +237,17 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, msg[1].len); } else { /* I2C */ - u8 buf[5 + msg[0].len]; - struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf), + u8 buf[MAX_XFER_SIZE]; + struct usb_req req = { CMD_I2C_RD, 0, 5 + msg[0].len, buf, msg[1].len, msg[1].buf }; + + if (5 + msg[0].len > sizeof(buf)) { + dev_warn(&d->udev->dev, + "%s: i2c xfer: len=%d is too big!\n", + KBUILD_MODNAME, msg[0].len); + ret = -EOPNOTSUPP; + goto unlock; + } req.mbox |= ((msg[0].addr & 0x80) >> 3); buf[0] = msg[1].len; buf[1] = msg[0].addr << 1; @@ -256,9 +274,17 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, msg[0].len - 3); } else { /* I2C */ - u8 buf[5 + msg[0].len]; - struct usb_req req = { CMD_I2C_WR, 0, sizeof(buf), buf, - 0, NULL }; + u8 buf[MAX_XFER_SIZE]; + struct usb_req req = { CMD_I2C_WR, 0, 5 + msg[0].len, + buf, 0, NULL }; + + if (5 + msg[0].len > sizeof(buf)) { + dev_warn(&d->udev->dev, + "%s: i2c xfer: len=%d is too big!\n", + KBUILD_MODNAME, msg[0].len); + ret = -EOPNOTSUPP; + goto unlock; + } req.mbox |= ((msg[0].addr & 0x80) >> 3); buf[0] = msg[0].len; buf[1] = msg[0].addr << 1; @@ -268,15 +294,34 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, memcpy(&buf[5], msg[0].buf, msg[0].len); ret = af9035_ctrl_msg(d, &req); } + } else if (num == 1 && (msg[0].flags & I2C_M_RD)) { + if (msg[0].len > 40) { + /* TODO: correct limits > 40 */ + ret = -EOPNOTSUPP; + } else { + /* I2C */ + u8 buf[5]; + struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf), + buf, msg[0].len, msg[0].buf }; + req.mbox |= ((msg[0].addr & 0x80) >> 3); + buf[0] = msg[0].len; + buf[1] = msg[0].addr << 1; + buf[2] = 0x00; /* reg addr len */ + buf[3] = 0x00; /* reg addr MSB */ + buf[4] = 0x00; /* reg addr LSB */ + ret = af9035_ctrl_msg(d, &req); + } } else { /* - * We support only two kind of I2C transactions: - * 1) 1 x read + 1 x write + * We support only three kind of I2C transactions: + * 1) 1 x read + 1 x write (repeated start) * 2) 1 x write + * 3) 1 x read */ ret = -EOPNOTSUPP; } +unlock: mutex_unlock(&d->i2c_mutex); if (ret < 0) @@ -317,8 +362,8 @@ static int af9035_identify_state(struct dvb_usb_device *d, const char **name) dev_info(&d->udev->dev, "%s: prechip_version=%02x chip_version=%02x chip_type=%04x\n", - __func__, state->prechip_version, state->chip_version, - state->chip_type); + KBUILD_MODNAME, state->prechip_version, + state->chip_version, state->chip_type); if (state->chip_type == 0x9135) { if (state->chip_version == 0x02) @@ -382,9 +427,10 @@ static int af9035_download_firmware_old(struct dvb_usb_device *d, hdr_checksum = fw->data[fw->size - i + 5] << 8; hdr_checksum |= fw->data[fw->size - i + 6] << 0; - dev_dbg(&d->udev->dev, "%s: core=%d addr=%04x data_len=%d " \ - "checksum=%04x\n", __func__, hdr_core, hdr_addr, - hdr_data_len, hdr_checksum); + dev_dbg(&d->udev->dev, + "%s: core=%d addr=%04x data_len=%d checksum=%04x\n", + __func__, hdr_core, hdr_addr, hdr_data_len, + hdr_checksum); if (((hdr_core != 1) && (hdr_core != 2)) || (hdr_data_len > i)) { @@ -489,7 +535,7 @@ static int af9035_download_firmware(struct dvb_usb_device *d, u8 rbuf[4]; u8 tmp; struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; - struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ; + struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf }; dev_dbg(&d->udev->dev, "%s:\n", __func__); /* @@ -498,11 +544,11 @@ static int af9035_download_firmware(struct dvb_usb_device *d, * which is done by master demod. * Master feeds also clock and controls power via GPIO. */ - ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_DUAL_MODE, &tmp); + ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp); if (ret < 0) goto err; - if (tmp) { + if (tmp == 1 || tmp == 3) { /* configure gpioh1, reset & power slave demod */ ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01); if (ret < 0) @@ -529,6 +575,10 @@ static int af9035_download_firmware(struct dvb_usb_device *d, if (ret < 0) goto err; + /* use default I2C address if eeprom has no address set */ + if (!tmp) + tmp = 0x3a; + if (state->chip_type == 0x9135) { ret = af9035_wr_reg(d, 0x004bfb, tmp); if (ret < 0) @@ -591,6 +641,7 @@ static int af9035_read_config(struct dvb_usb_device *d) /* demod I2C "address" */ state->af9033_config[0].i2c_addr = 0x38; + state->af9033_config[1].i2c_addr = 0x3a; state->af9033_config[0].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; state->af9033_config[1].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB; @@ -620,13 +671,15 @@ static int af9035_read_config(struct dvb_usb_device *d) } /* check if there is dual tuners */ - ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_DUAL_MODE, &tmp); + ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp); if (ret < 0) goto err; - state->dual_mode = tmp; - dev_dbg(&d->udev->dev, "%s: dual mode=%d\n", __func__, - state->dual_mode); + if (tmp == 1 || tmp == 3) + state->dual_mode = true; + + dev_dbg(&d->udev->dev, "%s: ts mode=%d dual mode=%d\n", __func__, + tmp, state->dual_mode); if (state->dual_mode) { /* read 2nd demodulator I2C address */ @@ -636,7 +689,9 @@ static int af9035_read_config(struct dvb_usb_device *d) if (ret < 0) goto err; - state->af9033_config[1].i2c_addr = tmp; + if (tmp) + state->af9033_config[1].i2c_addr = tmp; + dev_dbg(&d->udev->dev, "%s: 2nd demod I2C addr=%02x\n", __func__, tmp); } @@ -649,15 +704,41 @@ static int af9035_read_config(struct dvb_usb_device *d) if (ret < 0) goto err; - if (tmp == 0x00) - dev_dbg(&d->udev->dev, - "%s: [%d]tuner not set, using default\n", - __func__, i); - else + dev_dbg(&d->udev->dev, "%s: [%d]tuner=%02x\n", + __func__, i, tmp); + + /* tuner sanity check */ + if (state->chip_type == 0x9135) { + if (state->chip_version == 0x02) { + /* IT9135 BX (v2) */ + switch (tmp) { + case AF9033_TUNER_IT9135_60: + case AF9033_TUNER_IT9135_61: + case AF9033_TUNER_IT9135_62: + state->af9033_config[i].tuner = tmp; + break; + } + } else { + /* IT9135 AX (v1) */ + switch (tmp) { + case AF9033_TUNER_IT9135_38: + case AF9033_TUNER_IT9135_51: + case AF9033_TUNER_IT9135_52: + state->af9033_config[i].tuner = tmp; + break; + } + } + } else { + /* AF9035 */ state->af9033_config[i].tuner = tmp; + } - dev_dbg(&d->udev->dev, "%s: [%d]tuner=%02x\n", - __func__, i, state->af9033_config[i].tuner); + if (state->af9033_config[i].tuner != tmp) { + dev_info(&d->udev->dev, + "%s: [%d] overriding tuner from %02x to %02x\n", + KBUILD_MODNAME, i, tmp, + state->af9033_config[i].tuner); + } switch (state->af9033_config[i].tuner) { case AF9033_TUNER_TUA9001: @@ -890,12 +971,7 @@ static int af9035_frontend_callback(void *adapter_priv, int component, static int af9035_get_adapter_count(struct dvb_usb_device *d) { struct state *state = d_to_priv(d); - - /* disable 2nd adapter as we don't have PID filters implemented */ - if (d->udev->speed == USB_SPEED_FULL) - return 1; - else - return state->dual_mode + 1; + return state->dual_mode + 1; } static int af9035_frontend_attach(struct dvb_usb_adapter *adap) @@ -913,7 +989,7 @@ static int af9035_frontend_attach(struct dvb_usb_adapter *adap) /* attach demodulator */ adap->fe[0] = dvb_attach(af9033_attach, &state->af9033_config[adap->id], - &d->i2c_adap); + &d->i2c_adap, &state->ops); if (adap->fe[0] == NULL) { ret = -ENODEV; goto err; @@ -1200,9 +1276,9 @@ static int af9035_init(struct dvb_usb_device *d) { 0x80f9a4, 0x00, 0x01 }, }; - dev_dbg(&d->udev->dev, "%s: USB speed=%d frame_size=%04x " \ - "packet_size=%02x\n", __func__, - d->udev->speed, frame_size, packet_size); + dev_dbg(&d->udev->dev, + "%s: USB speed=%d frame_size=%04x packet_size=%02x\n", + __func__, d->udev->speed, frame_size, packet_size); /* init endpoints */ for (i = 0; i < ARRAY_SIZE(tab); i++) { @@ -1321,58 +1397,19 @@ static int af9035_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, return 0; } -/* - * FIXME: PID filter is property of demodulator and should be moved to the - * correct driver. Also we support only adapter #0 PID filter and will - * disable adapter #1 if USB1.1 is used. - */ static int af9035_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) { - struct dvb_usb_device *d = adap_to_d(adap); - int ret; - - dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); - - ret = af9035_wr_reg_mask(d, 0x80f993, onoff, 0x01); - if (ret < 0) - goto err; - - return 0; - -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + struct state *state = adap_to_priv(adap); - return ret; + return state->ops.pid_filter_ctrl(adap->fe[0], onoff); } static int af9035_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { - struct dvb_usb_device *d = adap_to_d(adap); - int ret; - u8 wbuf[2] = {(pid >> 0) & 0xff, (pid >> 8) & 0xff}; - - dev_dbg(&d->udev->dev, "%s: index=%d pid=%04x onoff=%d\n", - __func__, index, pid, onoff); - - ret = af9035_wr_regs(d, 0x80f996, wbuf, 2); - if (ret < 0) - goto err; - - ret = af9035_wr_reg(d, 0x80f994, onoff); - if (ret < 0) - goto err; - - ret = af9035_wr_reg(d, 0x80f995, index); - if (ret < 0) - goto err; - - return 0; - -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + struct state *state = adap_to_priv(adap); - return ret; + return state->ops.pid_filter(adap->fe[0], index, pid, onoff); } static int af9035_probe(struct usb_interface *intf, @@ -1446,6 +1483,13 @@ static const struct dvb_usb_device_properties af9035_props = { .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), }, { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 32, + .pid_filter_ctrl = af9035_pid_filter_ctrl, + .pid_filter = af9035_pid_filter, + .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), }, }, @@ -1477,18 +1521,40 @@ static const struct usb_device_id af9035_id_table[] = { &af9035_props, "AVerMedia Twinstar (A825)", NULL) }, { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS, &af9035_props, "Asus U3100Mini Plus", NULL) }, - { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa, + { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa, &af9035_props, "TerraTec Cinergy T Stick (rev. 2)", NULL) }, /* IT9135 devices */ -#if 0 - { DVB_USB_DEVICE(0x048d, 0x9135, - &af9035_props, "IT9135 reference design", NULL) }, - { DVB_USB_DEVICE(0x048d, 0x9006, - &af9035_props, "IT9135 reference design", NULL) }, -#endif + { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135, + &af9035_props, "ITE 9135 Generic", RC_MAP_IT913X_V1) }, + { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005, + &af9035_props, "ITE 9135(9005) Generic", RC_MAP_IT913X_V2) }, + { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006, + &af9035_props, "ITE 9135(9006) Generic", RC_MAP_IT913X_V1) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_1835, + &af9035_props, "Avermedia A835B(1835)", RC_MAP_IT913X_V2) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_2835, + &af9035_props, "Avermedia A835B(2835)", RC_MAP_IT913X_V2) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_3835, + &af9035_props, "Avermedia A835B(3835)", RC_MAP_IT913X_V2) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_4835, + &af9035_props, "Avermedia A835B(4835)", RC_MAP_IT913X_V2) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_H335, + &af9035_props, "Avermedia H335", RC_MAP_IT913X_V2) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09, + &af9035_props, "Kworld UB499-2T T09", RC_MAP_IT913X_V1) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137, + &af9035_props, "Sveon STV22 Dual DVB-T HDTV", + RC_MAP_IT913X_V1) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CTVDIGDUAL_V2, + &af9035_props, "Digital Dual TV Receiver CTVDIGDUAL_V2", + RC_MAP_IT913X_V1) }, /* XXX: that same ID [0ccd:0099] is used by af9015 driver too */ { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099, &af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05, + &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) }, + { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xf900, + &af9035_props, "Hauppauge WinTV-MiniStick 2", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, af9035_id_table); |
