diff options
Diffstat (limited to 'drivers/media/dvb/ttpci/budget.c')
| -rw-r--r-- | drivers/media/dvb/ttpci/budget.c | 672 |
1 files changed, 0 insertions, 672 deletions
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c deleted file mode 100644 index 9961917e8a7..00000000000 --- a/drivers/media/dvb/ttpci/budget.c +++ /dev/null @@ -1,672 +0,0 @@ -/* - * budget.c: driver for the SAA7146 based Budget DVB cards - * - * Compiled from various sources by Michael Hunold <michael@mihu.de> - * - * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de> - * - * Copyright (C) 1999-2002 Ralph Metzler - * & Marcus Metzler for convergence integrated media GmbH - * - * 26feb2004 Support for FS Activy Card (Grundig tuner) by - * Michael Dreher <michael@5dot1.de>, - * Oliver Endriss <o.endriss@gmx.de> and - * Andreas 'randy' Weinberger - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * Or, point your browser to http://www.gnu.org/copyleft/gpl.html - * - * - * the project's page is at http://www.linuxtv.org/dvb/ - */ - -#include "budget.h" -#include "stv0299.h" -#include "ves1x93.h" -#include "ves1820.h" -#include "l64781.h" -#include "tda8083.h" -#include "s5h1420.h" - -static void Set22K (struct budget *budget, int state) -{ - struct saa7146_dev *dev=budget->dev; - dprintk(2, "budget: %p\n", budget); - saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO)); -} - -/* Diseqc functions only for TT Budget card */ -/* taken from the Skyvision DVB driver by - Ralph Metzler <rjkm@metzlerbros.de> */ - -static void DiseqcSendBit (struct budget *budget, int data) -{ - struct saa7146_dev *dev=budget->dev; - dprintk(2, "budget: %p\n", budget); - - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); - udelay(data ? 500 : 1000); - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); - udelay(data ? 1000 : 500); -} - -static void DiseqcSendByte (struct budget *budget, int data) -{ - int i, par=1, d; - - dprintk(2, "budget: %p\n", budget); - - for (i=7; i>=0; i--) { - d = (data>>i)&1; - par ^= d; - DiseqcSendBit(budget, d); - } - - DiseqcSendBit(budget, par); -} - -static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst) -{ - struct saa7146_dev *dev=budget->dev; - int i; - - dprintk(2, "budget: %p\n", budget); - - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); - mdelay(16); - - for (i=0; i<len; i++) - DiseqcSendByte(budget, msg[i]); - - mdelay(16); - - if (burst!=-1) { - if (burst) - DiseqcSendByte(budget, 0xff); - else { - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); - udelay(12500); - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); - } - msleep(20); - } - - return 0; -} - -/* - * Routines for the Fujitsu Siemens Activy budget card - * 22 kHz tone and DiSEqC are handled by the frontend. - * Voltage must be set here. - */ -static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage) -{ - struct saa7146_dev *dev=budget->dev; - - dprintk(2, "budget: %p\n", budget); - - switch (voltage) { - case SEC_VOLTAGE_13: - saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO); - break; - case SEC_VOLTAGE_18: - saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); - break; - default: - return -EINVAL; - } - - return 0; -} - -static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - - return SetVoltage_Activy (budget, voltage); -} - -static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - - switch (tone) { - case SEC_TONE_ON: - Set22K (budget, 1); - break; - - case SEC_TONE_OFF: - Set22K (budget, 0); - break; - - default: - return -EINVAL; - } - - return 0; -} - -static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - - SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0); - - return 0; -} - -static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - - SendDiSEqCMsg (budget, 0, NULL, minicmd); - - return 0; -} - -static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u8 buf; - struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) }; - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - switch(voltage) { - case SEC_VOLTAGE_13: - buf = (buf & 0xf7) | 0x04; - break; - - case SEC_VOLTAGE_18: - buf = (buf & 0xf7) | 0x0c; - break; - - case SEC_VOLTAGE_OFF: - buf = buf & 0xf0; - break; - } - - msg.flags = 0; - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - return 0; -} - -static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, int arg) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u8 buf; - struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) }; - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - if (arg) { - buf = buf | 0x10; - } else { - buf = buf & 0xef; - } - - msg.flags = 0; - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - return 0; -} - -static void lnbp21_init(struct budget* budget) -{ - u8 buf = 0x00; - struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) }; - - i2c_transfer (&budget->i2c_adap, &msg, 1); -} - -static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u8 pwr = 0; - u8 buf[4]; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; - u32 div = (params->frequency + 479500) / 125; - - if (params->frequency > 2000000) pwr = 3; - else if (params->frequency > 1800000) pwr = 2; - else if (params->frequency > 1600000) pwr = 1; - else if (params->frequency > 1200000) pwr = 0; - else if (params->frequency >= 1100000) pwr = 1; - else pwr = 2; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = ((div & 0x18000) >> 10) | 0x95; - buf[3] = (pwr << 6) | 0x30; - - // NOTE: since we're using a prescaler of 2, we set the - // divisor frequency to 62.5kHz and divide by 125 above - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct ves1x93_config alps_bsrv2_config = -{ - .demod_address = 0x08, - .xin = 90100000UL, - .invert_pwm = 0, - .pll_set = alps_bsrv2_pll_set, -}; - -static u8 alps_bsru6_inittab[] = { - 0x01, 0x15, - 0x02, 0x00, - 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ - 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ - 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x52, - 0xff, 0xff -}; - -static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) -{ - u8 aclk = 0; - u8 bclk = 0; - - if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } - else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } - else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } - else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } - else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } - else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } - - stv0299_writereg (fe, 0x13, aclk); - stv0299_writereg (fe, 0x14, bclk); - stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); - - return 0; -} - -static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u8 data[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; - - if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL; - - div = (params->frequency + (125 - 1)) / 125; // round correctly - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; - data[3] = 0xC4; - - if (params->frequency > 1530000) data[3] = 0xc0; - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct stv0299_config alps_bsru6_config = { - - .demod_address = 0x68, - .inittab = alps_bsru6_inittab, - .mclk = 88000000UL, - .invert = 1, - .enhanced_tuning = 0, - .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = alps_bsru6_set_symbol_rate, - .pll_set = alps_bsru6_pll_set, -}; - -static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u32 div; - u8 data[4]; - struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; - - div = (params->frequency + 35937500 + 31250) / 62500; - - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0x85 | ((div >> 10) & 0x60); - data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81); - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct ves1820_config alps_tdbe2_config = { - .demod_address = 0x09, - .xin = 57840000UL, - .invert = 1, - .selagc = VES1820_SELAGC_SIGNAMPERR, - .pll_set = alps_tdbe2_pll_set, -}; - -static int grundig_29504_401_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u32 div; - u8 cfg, cpump, band_select; - u8 data[4]; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; - - div = (36125000 + params->frequency) / 166666; - - cfg = 0x88; - - if (params->frequency < 175000000) cpump = 2; - else if (params->frequency < 390000000) cpump = 1; - else if (params->frequency < 470000000) cpump = 2; - else if (params->frequency < 750000000) cpump = 1; - else cpump = 3; - - if (params->frequency < 175000000) band_select = 0x0e; - else if (params->frequency < 470000000) band_select = 0x05; - else band_select = 0x03; - - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = ((div >> 10) & 0x60) | cfg; - data[3] = (cpump << 6) | band_select; - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct l64781_config grundig_29504_401_config = { - .demod_address = 0x55, - .pll_set = grundig_29504_401_pll_set, -}; - -static int grundig_29504_451_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u32 div; - u8 data[4]; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; - - div = params->frequency / 125; - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0x8e; - data[3] = 0x00; - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct tda8083_config grundig_29504_451_config = { - .demod_address = 0x68, - .pll_set = grundig_29504_451_pll_set, -}; - -static int s5h1420_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u32* freqout) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u32 div; - u8 data[4]; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; - - div = params->frequency / 1000; - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0xc2; - - if (div < 1450) - data[3] = 0x00; - else if (div < 1850) - data[3] = 0x40; - else if (div < 2000) - data[3] = 0x80; - else - data[3] = 0xc0; - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - *freqout = div * 1000; - return 0; -} - -static struct s5h1420_config s5h1420_config = { - .demod_address = 0x53, - .pll_set = s5h1420_pll_set, -}; - -static u8 read_pwm(struct budget* budget) -{ - u8 b = 0xff; - u8 pwm; - struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, - { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; - - if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) - pwm = 0x48; - - return pwm; -} - -static void frontend_init(struct budget *budget) -{ - switch(budget->dev->pci->subsystem_device) { - case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) - case 0x1013: - // try the ALPS BSRV2 first of all - budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd; - budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst; - budget->dvb_frontend->ops->set_tone = budget_set_tone; - break; - } - - // try the ALPS BSRU6 now - budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd; - budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst; - budget->dvb_frontend->ops->set_tone = budget_set_tone; - break; - } - break; - - case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659)) - - budget->dvb_frontend = ves1820_attach(&alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget)); - if (budget->dvb_frontend) break; - break; - - case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060)) - - budget->dvb_frontend = l64781_attach(&grundig_29504_401_config, &budget->i2c_adap); - if (budget->dvb_frontend) break; - break; - - case 0x4f60: // Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/ALPS BSRU6(tsa5059)) - budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage; - break; - } - break; - - case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522)) - budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage; - break; - } - break; - - case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260)) - budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage; - budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; - lnbp21_init(budget); - break; - } - } - - if (budget->dvb_frontend == NULL) { - printk("budget: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", - budget->dev->pci->vendor, - budget->dev->pci->device, - budget->dev->pci->subsystem_vendor, - budget->dev->pci->subsystem_device); - } else { - if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) { - printk("budget: Frontend registration failed!\n"); - if (budget->dvb_frontend->ops->release) - budget->dvb_frontend->ops->release(budget->dvb_frontend); - budget->dvb_frontend = NULL; - } - } -} - -static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) -{ - struct budget *budget = NULL; - int err; - - budget = kmalloc(sizeof(struct budget), GFP_KERNEL); - if( NULL == budget ) { - return -ENOMEM; - } - - dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget); - - dev->ext_priv = budget; - - if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) { - printk("==> failed\n"); - kfree (budget); - return err; - } - - budget->dvb_adapter.priv = budget; - frontend_init(budget); - - return 0; -} - -static int budget_detach (struct saa7146_dev* dev) -{ - struct budget *budget = (struct budget*) dev->ext_priv; - int err; - - if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend); - - err = ttpci_budget_deinit (budget); - - kfree (budget); - dev->ext_priv = NULL; - - return err; -} - -static struct saa7146_extension budget_extension; - -MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); -MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC); -MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); -MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); - -static struct pci_device_id pci_tbl[] = { - MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), - MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), - MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), - MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), - MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), - MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), - MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), - { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_extension budget_extension = { - .name = "budget dvb\0", - .flags = 0, - - .module = THIS_MODULE, - .pci_tbl = pci_tbl, - .attach = budget_attach, - .detach = budget_detach, - - .irq_mask = MASK_10, - .irq_func = ttpci_budget_irq10_handler, -}; - -static int __init budget_init(void) -{ - return saa7146_register_extension(&budget_extension); -} - -static void __exit budget_exit(void) -{ - saa7146_unregister_extension(&budget_extension); -} - -module_init(budget_init); -module_exit(budget_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); -MODULE_DESCRIPTION("driver for the SAA7146 based so-called " - "budget PCI DVB cards by Siemens, Technotrend, Hauppauge"); |