aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/ttpci/budget-av.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/ttpci/budget-av.c')
-rw-r--r--drivers/media/dvb/ttpci/budget-av.c1348
1 files changed, 0 insertions, 1348 deletions
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
deleted file mode 100644
index 1465c04e49a..00000000000
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ /dev/null
@@ -1,1348 +0,0 @@
-/*
- * budget-av.c: driver for the SAA7146 based Budget DVB cards
- * with analog video in
- *
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
- *
- * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
- * Andrew de Quincey <adq_dvb@lidskialf.net>
- *
- * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
- *
- * Copyright (C) 1999-2002 Ralph Metzler
- * & Marcus Metzler for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/dvb/
- */
-
-#include "budget.h"
-#include "stv0299.h"
-#include "tda10021.h"
-#include "tda1004x.h"
-#include "dvb-pll.h"
-#include <media/saa7146_vv.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-
-#include "dvb_ca_en50221.h"
-
-#define DEBICICAM 0x02420000
-
-struct budget_av {
- struct budget budget;
- struct video_device *vd;
- int cur_input;
- int has_saa7113;
- struct tasklet_struct ciintf_irq_tasklet;
- int slot_status;
- struct dvb_ca_en50221 ca;
-};
-
-/* GPIO CI Connections:
- * 0 - Vcc/Reset (Reset is controlled by capacitor)
- * 1 - Attribute Memory
- * 2 - Card Enable (Active Low)
- * 3 - Card Detect
- */
-
-/****************************************************************************
- * INITIALIZATION
- ****************************************************************************/
-
-static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
-{
- u8 mm1[] = { 0x00 };
- u8 mm2[] = { 0x00 };
- struct i2c_msg msgs[2];
-
- msgs[0].flags = 0;
- msgs[1].flags = I2C_M_RD;
- msgs[0].addr = msgs[1].addr = id / 2;
- mm1[0] = reg;
- msgs[0].len = 1;
- msgs[1].len = 1;
- msgs[0].buf = mm1;
- msgs[1].buf = mm2;
-
- i2c_transfer(i2c, msgs, 2);
-
- return mm2[0];
-}
-
-static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
-{
- u8 mm1[] = { reg };
- struct i2c_msg msgs[2] = {
- {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
- {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
- };
-
- if (i2c_transfer(i2c, msgs, 2) != 2)
- return -EIO;
-
- return 0;
-}
-
-static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
-{
- u8 msg[2] = { reg, val };
- struct i2c_msg msgs;
-
- msgs.flags = 0;
- msgs.addr = id / 2;
- msgs.len = 2;
- msgs.buf = msg;
- return i2c_transfer(i2c, &msgs, 1);
-}
-
-static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
-{
- struct budget_av *budget_av = (struct budget_av *) ca->data;
- int result;
-
- if (slot != 0)
- return -EINVAL;
-
- saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
- udelay(1);
-
- result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
- return result;
-}
-
-static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
-{
- struct budget_av *budget_av = (struct budget_av *) ca->data;
- int result;
-
- if (slot != 0)
- return -EINVAL;
-
- saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
- udelay(1);
-
- result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
- return result;
-}
-
-static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
-{
- struct budget_av *budget_av = (struct budget_av *) ca->data;
- int result;
-
- if (slot != 0)
- return -EINVAL;
-
- saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- udelay(1);
-
- result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
- return result;
-}
-
-static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
-{
- struct budget_av *budget_av = (struct budget_av *) ca->data;
- int result;
-
- if (slot != 0)
- return -EINVAL;
-
- saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- udelay(1);
-
- result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
- return result;
-}
-
-static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
- struct budget_av *budget_av = (struct budget_av *) ca->data;
- struct saa7146_dev *saa = budget_av->budget.dev;
- int timeout = 50; // 5 seconds (4.4.6 Ready)
-
- if (slot != 0)
- return -EINVAL;
-
- dprintk(1, "ciintf_slot_reset\n");
-
- saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
-
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
- msleep(2);
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
- msleep(20); /* 20 ms Vcc settling time */
-
- saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
-
- /* This should have been based on pin 16 READY of the pcmcia port,
- * but AFAICS it is not routed to the saa7146 */
- while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
- msleep(100);
-
- if (timeout <= 0)
- {
- printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
- saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
- struct budget_av *budget_av = (struct budget_av *) ca->data;
- struct saa7146_dev *saa = budget_av->budget.dev;
-
- if (slot != 0)
- return -EINVAL;
-
- dprintk(1, "ciintf_slot_shutdown\n");
-
- ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
- budget_av->slot_status = 0;
- return 0;
-}
-
-static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
- struct budget_av *budget_av = (struct budget_av *) ca->data;
- struct saa7146_dev *saa = budget_av->budget.dev;
-
- if (slot != 0)
- return -EINVAL;
-
- dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
-
- ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
- return 0;
-}
-
-static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
-{
- struct budget_av *budget_av = (struct budget_av *) ca->data;
- struct saa7146_dev *saa = budget_av->budget.dev;
- int cam_present = 0;
-
- if (slot != 0)
- return -EINVAL;
-
- if (!budget_av->slot_status)
- {
- // first of all test the card detect line
- saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
- udelay(1);
- if (saa7146_read(saa, PSR) & MASK_06)
- {
- cam_present = 1;
- }
- saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-
- // that is unreliable however, so try and read from IO memory
- if (!cam_present)
- {
- saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) != -ETIMEDOUT)
- {
- cam_present = 1;
- }
- }
-
- // did we find something?
- if (cam_present) {
- printk(KERN_INFO "budget-av: cam inserted\n");
- budget_av->slot_status = 1;
- }
- } else if (!open) {
- saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
- {
- printk(KERN_INFO "budget-av: cam ejected\n");
- saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
- budget_av->slot_status = 0;
- }
- }
-
- if (budget_av->slot_status == 1)
- return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
-
- return 0;
-}
-
-static int ciintf_init(struct budget_av *budget_av)
-{
- struct saa7146_dev *saa = budget_av->budget.dev;
- int result;
-
- memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
-
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
- saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
- saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
- saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-
- /* Enable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
-
- /* register CI interface */
- budget_av->ca.owner = THIS_MODULE;
- budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
- budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
- budget_av->ca.read_cam_control = ciintf_read_cam_control;
- budget_av->ca.write_cam_control = ciintf_write_cam_control;
- budget_av->ca.slot_reset = ciintf_slot_reset;
- budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
- budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
- budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
- budget_av->ca.data = budget_av;
-
- if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
- &budget_av->ca, 0, 1)) != 0) {
- printk(KERN_ERR "budget-av: ci initialisation failed.\n");
- goto error;
- }
-
- printk(KERN_INFO "budget-av: ci interface initialised.\n");
- budget_av->budget.ci_present = 1;
- return 0;
-
-error:
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
- return result;
-}
-
-static void ciintf_deinit(struct budget_av *budget_av)
-{
- struct saa7146_dev *saa = budget_av->budget.dev;
-
- saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
- saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
- saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
- saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
-
- /* release the CA device */
- dvb_ca_en50221_release(&budget_av->ca);
-
- /* disable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
-}
-
-
-static const u8 saa7113_tab[] = {
- 0x01, 0x08,
- 0x02, 0xc0,
- 0x03, 0x33,
- 0x04, 0x00,
- 0x05, 0x00,
- 0x06, 0xeb,
- 0x07, 0xe0,
- 0x08, 0x28,
- 0x09, 0x00,
- 0x0a, 0x80,
- 0x0b, 0x47,
- 0x0c, 0x40,
- 0x0d, 0x00,
- 0x0e, 0x01,
- 0x0f, 0x44,
-
- 0x10, 0x08,
- 0x11, 0x0c,
- 0x12, 0x7b,
- 0x13, 0x00,
- 0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
-
- 0x57, 0xff,
- 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
- 0x5b, 0x83, 0x5e, 0x00,
- 0xff
-};
-
-static int saa7113_init(struct budget_av *budget_av)
-{
- struct budget *budget = &budget_av->budget;
- struct saa7146_dev *saa = budget->dev;
- const u8 *data = saa7113_tab;
-
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
- msleep(200);
-
- if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
- dprintk(1, "saa7113 not found on KNC card\n");
- return -ENODEV;
- }
-
- dprintk(1, "saa7113 detected and initializing\n");
-
- while (*data != 0xff) {
- i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
- data += 2;
- }
-
- dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
-
- return 0;
-}
-
-static int saa7113_setinput(struct budget_av *budget_av, int input)
-{
- struct budget *budget = &budget_av->budget;
-
- if (1 != budget_av->has_saa7113)
- return -ENODEV;
-
- if (input == 1) {
- i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
- i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
- } else if (input == 0) {
- i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
- i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
- } else
- return -EINVAL;
-
- budget_av->cur_input = input;
- return 0;
-}
-
-
-static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
-{
- u8 aclk = 0;
- u8 bclk = 0;
- u8 m1;
-
- aclk = 0xb5;
- if (srate < 2000000)
- bclk = 0x86;
- else if (srate < 5000000)
- bclk = 0x89;
- else if (srate < 15000000)
- bclk = 0x8f;
- else if (srate < 45000000)
- bclk = 0x95;
-
- m1 = 0x14;
- if (srate < 4000000)
- m1 = 0x10;
-
- stv0299_writereg(fe, 0x13, aclk);
- stv0299_writereg(fe, 0x14, bclk);
- stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
- stv0299_writereg(fe, 0x0f, 0x80 | m1);
-
- return 0;
-}
-
-static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct dvb_frontend_parameters *params)
-{
- u32 div;
- u8 buf[4];
- struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = div & 0xff;
- buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- buf[3] = 0x20;
-
- if (params->u.qpsk.symbol_rate < 4000000)
- buf[3] |= 1;
-
- if (params->frequency < 1250000)
- buf[3] |= 0;
- else if (params->frequency < 1550000)
- buf[3] |= 0x40;
- else if (params->frequency < 2050000)
- buf[3] |= 0x80;
- else if (params->frequency < 2150000)
- buf[3] |= 0xC0;
-
- if (i2c_transfer(i2c, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
-#define MIN2(a,b) ((a) < (b) ? (a) : (b))
-#define MIN3(a,b,c) MIN2(MIN2(a,b),c)
-
-static int philips_su1278sh2_tua6100_pll_set(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct dvb_frontend_parameters *params)
-{
- u8 reg0 [2] = { 0x00, 0x00 };
- u8 reg1 [4] = { 0x01, 0x00, 0x00, 0x00 };
- u8 reg2 [3] = { 0x02, 0x00, 0x00 };
- int _fband;
- int first_ZF;
- int R, A, N, P, M;
- struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = NULL,.len = 0 };
- int freq = params->frequency;
-
- first_ZF = (freq) / 1000;
-
- if (abs(MIN2(abs(first_ZF-1190),abs(first_ZF-1790))) <
- abs(MIN3(abs(first_ZF-1202),abs(first_ZF-1542),abs(first_ZF-1890))))
- _fband = 2;
- else
- _fband = 3;
-
- if (_fband == 2) {
- if (((first_ZF >= 950) && (first_ZF < 1350)) ||
- ((first_ZF >= 1430) && (first_ZF < 1950)))
- reg0[1] = 0x07;
- else if (((first_ZF >= 1350) && (first_ZF < 1430)) ||
- ((first_ZF >= 1950) && (first_ZF < 2150)))
- reg0[1] = 0x0B;
- }
-
- if(_fband == 3) {
- if (((first_ZF >= 950) && (first_ZF < 1350)) ||
- ((first_ZF >= 1455) && (first_ZF < 1950)))
- reg0[1] = 0x07;
- else if (((first_ZF >= 1350) && (first_ZF < 1420)) ||
- ((first_ZF >= 1950) && (first_ZF < 2150)))
- reg0[1] = 0x0B;
- else if ((first_ZF >= 1420) && (first_ZF < 1455))
- reg0[1] = 0x0F;
- }
-
- if (first_ZF > 1525)
- reg1[1] |= 0x80;
- else
- reg1[1] &= 0x7F;
-
- if (_fband == 2) {
- if (first_ZF > 1430) { /* 1430MHZ */
- reg1[1] &= 0xCF; /* N2 */
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- } else {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- }
- }
-
- if (_fband == 3) {
- if ((first_ZF >= 1455) &&
- (first_ZF < 1630)) {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- } else {
- if (first_ZF < 1455) {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- } else {
- if (first_ZF >= 1630) {
- reg1[1] &= 0xCF; /* N2 */
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- }
- }
- }
- }
-
- /* set ports, enable P0 for symbol rates > 4Ms/s */
- if (params->u.qpsk.symbol_rate >= 4000000)
- reg1[1] |= 0x0c;
- else
- reg1[1] |= 0x04;
-
- reg2[1] |= 0x0c;
-
- R = 64;
- A = 64;
- P = 64; //32
-
- M = (freq * R) / 4; /* in Mhz */
- N = (M - A * 1000) / (P * 1000);
-
- reg1[1] |= (N >> 9) & 0x03;
- reg1[2] = (N >> 1) & 0xff;
- reg1[3] = (N << 7) & 0x80;
-
- reg2[1] |= (R >> 8) & 0x03;
- reg2[2] = R & 0xFF; /* R */
-
- reg1[3] |= A & 0x7f; /* A */
-
- if (P == 64)
- reg1[1] |= 0x40; /* Prescaler 64/65 */
-
- reg0[1] |= 0x03;
-
- /* already enabled - do not reenable i2c repeater or TX fails */
- msg.buf = reg0;
- msg.len = sizeof(reg0);
- if (i2c_transfer(i2c, &msg, 1) != 1)
- return -EIO;
-
- stv0299_enable_plli2c(fe);
- msg.buf = reg1;
- msg.len = sizeof(reg1);
- if (i2c_transfer(i2c, &msg, 1) != 1)
- return -EIO;
-
- stv0299_enable_plli2c(fe);
- msg.buf = reg2;
- msg.len = sizeof(reg2);
- if (i2c_transfer(i2c, &msg, 1) != 1)
- return -EIO;
-
- return 0;
-}
-
-static u8 typhoon_cinergy1200s_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x92,
- 0xff, 0xff
-};
-
-static struct stv0299_config typhoon_config = {
- .demod_address = 0x68,
- .inittab = typhoon_cinergy1200s_inittab,
- .mclk = 88000000UL,
- .invert = 0,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP0,
- .min_delay_ms = 100,
- .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278_ty_ci_pll_set,
-};
-
-
-static struct stv0299_config cinergy_1200s_config = {
- .demod_address = 0x68,
- .inittab = typhoon_cinergy1200s_inittab,
- .mclk = 88000000UL,
- .invert = 0,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_0,
- .volt13_op0_op1 = STV0299_VOLT13_OP0,
- .min_delay_ms = 100,
- .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278_ty_ci_pll_set,
-};
-
-static struct stv0299_config cinergy_1200s_1894_0010_config = {
- .demod_address = 0x68,
- .inittab = typhoon_cinergy1200s_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP0,
- .min_delay_ms = 100,
- .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278sh2_tua6100_pll_set,
-};
-
-static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- struct budget *budget = (struct budget *) fe->dvb->priv;
- u8 buf[4];
- struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
-
-#define TUNER_MUL 62500
-
- u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
-
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = div & 0xff;
- buf[2] = 0x86;
- buf[3] = (params->frequency < 150000000 ? 0x01 :
- params->frequency < 445000000 ? 0x02 : 0x04);
-
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
-static struct tda10021_config philips_cu1216_config = {
- .demod_address = 0x0c,
- .pll_set = philips_cu1216_pll_set,
-};
-
-
-
-
-static int philips_tu1216_pll_init(struct dvb_frontend *fe)
-{
- struct budget *budget = (struct budget *) fe->dvb->priv;
- static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
- struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
-
- // setup PLL configuration
- if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
- msleep(1);
-
- return 0;
-}
-
-static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- struct budget *budget = (struct budget *) fe->dvb->priv;
- u8 tuner_buf[4];
- struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
- sizeof(tuner_buf) };
- int tuner_frequency = 0;
- u8 band, cp, filter;
-
- // determine charge pump
- tuner_frequency = params->frequency + 36166000;
- if (tuner_frequency < 87000000)
- return -EINVAL;
- else if (tuner_frequency < 130000000)
- cp = 3;
- else if (tuner_frequency < 160000000)
- cp = 5;
- else if (tuner_frequency < 200000000)
- cp = 6;
- else if (tuner_frequency < 290000000)
- cp = 3;
- else if (tuner_frequency < 420000000)
- cp = 5;
- else if (tuner_frequency < 480000000)
- cp = 6;
- else if (tuner_frequency < 620000000)
- cp = 3;
- else if (tuner_frequency < 830000000)
- cp = 5;
- else if (tuner_frequency < 895000000)
- cp = 7;
- else
- return -EINVAL;
-
- // determine band
- if (params->frequency < 49000000)
- return -EINVAL;
- else if (params->frequency < 161000000)
- band = 1;
- else if (params->frequency < 444000000)
- band = 2;
- else if (params->frequency < 861000000)
- band = 4;
- else
- return -EINVAL;
-
- // setup PLL filter
- switch (params->u.ofdm.bandwidth) {
- case BANDWIDTH_6_MHZ:
- filter = 0;
- break;
-
- case BANDWIDTH_7_MHZ:
- filter = 0;
- break;
-
- case BANDWIDTH_8_MHZ:
- filter = 1;
- break;
-
- default:
- return -EINVAL;
- }
-
- // calculate divisor
- // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
- tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
-
- // setup tuner buffer
- tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
- tuner_buf[1] = tuner_frequency & 0xff;
- tuner_buf[2] = 0xca;
- tuner_buf[3] = (cp << 5) | (filter << 3) | band;
-
- if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
-
- msleep(1);
- return 0;
-}
-
-static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
- const struct firmware **fw, char *name)
-{
- struct budget *budget = (struct budget *) fe->dvb->priv;
-
- return request_firmware(fw, name, &budget->dev->pci->dev);
-}
-
-static struct tda1004x_config philips_tu1216_config = {
-
- .demod_address = 0x8,
- .invert = 1,
- .invert_oclk = 1,
- .xtal_freq = TDA10046_XTAL_4M,
- .agc_config = TDA10046_AGC_DEFAULT,
- .if_freq = TDA10046_FREQ_3617,
- .pll_init = philips_tu1216_pll_init,
- .pll_set = philips_tu1216_pll_set,
- .pll_sleep = NULL,
- .request_firmware = philips_tu1216_request_firmware,
-};
-
-static u8 philips_sd1878_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7d,
- 0x05, 0x35,
- 0x06, 0x40,
- 0x07, 0x00,
- 0x08, 0x43,
- 0x09, 0x02,
- 0x0C, 0x51,
- 0x0D, 0x82,
- 0x0E, 0x23,
- 0x10, 0x3f,
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9,
- 0x16, 0x19,
- 0x17, 0x8c,
- 0x18, 0x59,
- 0x19, 0xf8,
- 0x1a, 0xfe,
- 0x1c, 0x7f,
- 0x1d, 0x00,
- 0x1e, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00,
- 0x29, 0x28,
- 0x2a, 0x14,
- 0x2b, 0x0f,
- 0x2c, 0x09,
- 0x2d, 0x09,
- 0x31, 0x1f,
- 0x32, 0x19,
- 0x33, 0xfc,
- 0x34, 0x93,
- 0xff, 0xff
-};
-
-static int philips_sd1878_tda8261_pll_set(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct dvb_frontend_parameters *params)
-{
- u8 buf[4];
- int rc;
- struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)};
-
- if((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf,
- params->frequency, 0);
- if(rc < 0) return rc;
-
- if(i2c_transfer(i2c, &tuner_msg, 1) != 1)
- return -EIO;
-
- return 0;
-}
-
-static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
- u32 srate, u32 ratio)
-{
- u8 aclk = 0;
- u8 bclk = 0;
- u8 m1;
-
- aclk = 0xb5;
- if (srate < 2000000)
- bclk = 0x86;
- else if (srate < 5000000)
- bclk = 0x89;
- else if (srate < 15000000)
- bclk = 0x8f;
- else if (srate < 45000000)
- bclk = 0x95;
-
- m1 = 0x14;
- if (srate < 4000000)
- m1 = 0x10;
-
- stv0299_writereg(fe, 0x0e, 0x23);
- stv0299_writereg(fe, 0x0f, 0x94);
- stv0299_writereg(fe, 0x10, 0x39);
- stv0299_writereg(fe, 0x13, aclk);
- stv0299_writereg(fe, 0x14, bclk);
- stv0299_writereg(fe, 0x15, 0xc9);
- stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
- stv0299_writereg(fe, 0x0f, 0x80 | m1);
-
- return 0;
-}
-
-static struct stv0299_config philips_sd1878_config = {
- .demod_address = 0x68,
- .inittab = philips_sd1878_inittab,
- .mclk = 88000000UL,
- .invert = 0,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP0,
- .min_delay_ms = 100,
- .set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
- .pll_set = philips_sd1878_tda8261_pll_set,
-};
-
-static u8 read_pwm(struct budget_av *budget_av)
-{
- u8 b = 0xff;
- u8 pwm;
- struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
- {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
- };
-
- if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
- || (pwm == 0xff))
- pwm = 0x48;
-
- return pwm;
-}
-
-#define SUBID_DVBS_KNC1 0x0010
-#define SUBID_DVBS_KNC1_PLUS 0x0011
-#define SUBID_DVBS_TYPHOON 0x4f56
-#define SUBID_DVBS_CINERGY1200 0x1154
-#define SUBID_DVBS_CYNERGY1200N 0x1155
-
-#define SUBID_DVBS_TV_STAR 0x0014
-#define SUBID_DVBS_TV_STAR_CI 0x0016
-#define SUBID_DVBC_KNC1 0x0020
-#define SUBID_DVBC_KNC1_PLUS 0x0021
-#define SUBID_DVBC_CINERGY1200 0x1156
-
-#define SUBID_DVBT_KNC1_PLUS 0x0031
-#define SUBID_DVBT_KNC1 0x0030
-#define SUBID_DVBT_CINERGY1200 0x1157
-
-static void frontend_init(struct budget_av *budget_av)
-{
- struct saa7146_dev * saa = budget_av->budget.dev;
- struct dvb_frontend * fe = NULL;
-
- switch (saa->pci->subsystem_device) {
- case SUBID_DVBS_KNC1_PLUS:
- case SUBID_DVBC_KNC1_PLUS:
- case SUBID_DVBT_KNC1_PLUS:
- // Enable / PowerON Frontend
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
- saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
- break;
- }
-
- switch (saa->pci->subsystem_device) {
-
- case SUBID_DVBS_KNC1:
- if (saa->pci->subsystem_vendor == 0x1894) {
- fe = stv0299_attach(&cinergy_1200s_1894_0010_config,
- &budget_av->budget.i2c_adap);
- } else {
- fe = stv0299_attach(&typhoon_config,
- &budget_av->budget.i2c_adap);
- }
- break;
-
- case SUBID_DVBS_TV_STAR:
- case SUBID_DVBS_TV_STAR_CI:
- case SUBID_DVBS_CYNERGY1200N:
- fe = stv0299_attach(&philips_sd1878_config,
- &budget_av->budget.i2c_adap);
- break;
-
- case SUBID_DVBS_KNC1_PLUS:
- case SUBID_DVBS_TYPHOON:
- fe = stv0299_attach(&typhoon_config,
- &budget_av->budget.i2c_adap);
- break;
-
- case SUBID_DVBS_CINERGY1200:
- fe = stv0299_attach(&cinergy_1200s_config,
- &budget_av->budget.i2c_adap);
- break;
-
- case SUBID_DVBC_KNC1:
- case SUBID_DVBC_KNC1_PLUS:
- fe = tda10021_attach(&philips_cu1216_config,
- &budget_av->budget.i2c_adap,
- read_pwm(budget_av));
- break;
-
- case SUBID_DVBT_KNC1:
- case SUBID_DVBT_KNC1_PLUS:
- fe = tda10046_attach(&philips_tu1216_config,
- &budget_av->budget.i2c_adap);
- break;
-
- case SUBID_DVBC_CINERGY1200:
- fe = tda10021_attach(&philips_cu1216_config,
- &budget_av->budget.i2c_adap,
- read_pwm(budget_av));
- break;
-
- case SUBID_DVBT_CINERGY1200:
- fe = tda10046_attach(&philips_tu1216_config,
- &budget_av->budget.i2c_adap);
- break;
- }
-
- if (fe == NULL) {
- printk(KERN_ERR "budget-av: A frontend driver was not found "
- "for device %04x/%04x subsystem %04x/%04x\n",
- saa->pci->vendor,
- saa->pci->device,
- saa->pci->subsystem_vendor,
- saa->pci->subsystem_device);
- return;
- }
-
- budget_av->budget.dvb_frontend = fe;
-
- if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
- budget_av->budget.dvb_frontend)) {
- printk(KERN_ERR "budget-av: Frontend registration failed!\n");
- if (budget_av->budget.dvb_frontend->ops->release)
- budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
- budget_av->budget.dvb_frontend = NULL;
- }
-}
-
-
-static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
-{
- struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
-
- dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
-
- if (*isr & MASK_10)
- ttpci_budget_irq10_handler(dev, isr);
-}
-
-static int budget_av_detach(struct saa7146_dev *dev)
-{
- struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
- int err;
-
- dprintk(2, "dev: %p\n", dev);
-
- if (1 == budget_av->has_saa7113) {
- saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
-
- msleep(200);
-
- saa7146_unregister_device(&budget_av->vd, dev);
- }
-
- if (budget_av->budget.ci_present)
- ciintf_deinit(budget_av);
-
- if (budget_av->budget.dvb_frontend != NULL)
- dvb_unregister_frontend(budget_av->budget.dvb_frontend);
- err = ttpci_budget_deinit(&budget_av->budget);
-
- kfree(budget_av);
-
- return err;
-}
-
-static struct saa7146_ext_vv vv_data;
-
-static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
-{
- struct budget_av *budget_av;
- u8 *mac;
- int err;
-
- dprintk(2, "dev: %p\n", dev);
-
- if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL)))
- return -ENOMEM;
-
- budget_av->has_saa7113 = 0;
- budget_av->budget.ci_present = 0;
-
- dev->ext_priv = budget_av;
-
- if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) {
- kfree(budget_av);
- return err;
- }
-
- /* knc1 initialization */
- saa7146_write(dev, DD1_STREAM_B, 0x04000000);
- saa7146_write(dev, DD1_INIT, 0x07000600);
- saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
-
- if (saa7113_init(budget_av) == 0) {
- budget_av->has_saa7113 = 1;
-
- if (0 != saa7146_vv_init(dev, &vv_data)) {
- /* fixme: proper cleanup here */
- ERR(("cannot init vv subsystem.\n"));
- return err;
- }
-
- if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
- /* fixme: proper cleanup here */
- ERR(("cannot register capture v4l2 device.\n"));
- return err;
- }
-
- /* beware: this modifies dev->vv ... */
- saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
- SAA7146_HPS_SYNC_PORT_A);
-
- saa7113_setinput(budget_av, 0);
- } else {
- ciintf_init(budget_av);
- }
-
- /* fixme: find some sane values here... */
- saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
-
- mac = budget_av->budget.dvb_adapter.proposed_mac;
- if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
- printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
- budget_av->budget.dvb_adapter.num);
- memset(mac, 0, 6);
- } else {
- printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
- budget_av->budget.dvb_adapter.num,
- mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
- }
-
- budget_av->budget.dvb_adapter.priv = budget_av;
- frontend_init(budget_av);
-
- return 0;
-}
-
-#define KNC1_INPUTS 2
-static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
- {0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
- {1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
-};
-
-static struct saa7146_extension_ioctls ioctls[] = {
- {VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE},
- {VIDIOC_G_INPUT, SAA7146_EXCLUSIVE},
- {VIDIOC_S_INPUT, SAA7146_EXCLUSIVE},
- {0, 0}
-};
-
-static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
-{
- struct saa7146_dev *dev = fh->dev;
- struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
-
- switch (cmd) {
- case VIDIOC_ENUMINPUT:{
- struct v4l2_input *i = arg;
-
- dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
- if (i->index < 0 || i->index >= KNC1_INPUTS) {
- return -EINVAL;
- }
- memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
- return 0;
- }
- case VIDIOC_G_INPUT:{
- int *input = (int *) arg;
-
- *input = budget_av->cur_input;
-
- dprintk(1, "VIDIOC_G_INPUT %d.\n", *input);
- return 0;
- }
- case VIDIOC_S_INPUT:{
- int input = *(int *) arg;
- dprintk(1, "VIDIOC_S_INPUT %d.\n", input);
- return saa7113_setinput(budget_av, input);
- }
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static struct saa7146_standard standard[] = {
- {.name = "PAL",.id = V4L2_STD_PAL,
- .v_offset = 0x17,.v_field = 288,
- .h_offset = 0x14,.h_pixels = 680,
- .v_max_out = 576,.h_max_out = 768 },
-
- {.name = "NTSC",.id = V4L2_STD_NTSC,
- .v_offset = 0x16,.v_field = 240,
- .h_offset = 0x06,.h_pixels = 708,
- .v_max_out = 480,.h_max_out = 640, },
-};
-
-static struct saa7146_ext_vv vv_data = {
- .inputs = 2,
- .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
- .flags = 0,
- .stds = &standard[0],
- .num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
- .ioctls = &ioctls[0],
- .ioctl = av_ioctl,
-};
-
-static struct saa7146_extension budget_extension;
-
-MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
-MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
-MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
-MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
-MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
-MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
-MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
-MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
-MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
-MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
-MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
-
-static struct pci_device_id pci_tbl[] = {
- MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
- MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
- MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
- MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
- MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
- MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
- MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
- MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
- MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
- MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
- MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
- MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
- MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
- MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
- {
- .vendor = 0,
- }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static struct saa7146_extension budget_extension = {
- .name = "budget_av",
- .flags = SAA7146_I2C_SHORT_DELAY,
-
- .pci_tbl = pci_tbl,
-
- .module = THIS_MODULE,
- .attach = budget_av_attach,
- .detach = budget_av_detach,
-
- .irq_mask = MASK_10,
- .irq_func = budget_av_irq,
-};
-
-static int __init budget_av_init(void)
-{
- return saa7146_register_extension(&budget_extension);
-}
-
-static void __exit budget_av_exit(void)
-{
- saa7146_unregister_extension(&budget_extension);
-}
-
-module_init(budget_av_init);
-module_exit(budget_av_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
- "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2026-01-06 19:36:47 +0000