diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb/ttusb2.c')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/ttusb2.c | 453 |
1 files changed, 0 insertions, 453 deletions
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c deleted file mode 100644 index 0d4709ff9cb..00000000000 --- a/drivers/media/dvb/dvb-usb/ttusb2.c +++ /dev/null @@ -1,453 +0,0 @@ -/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones - * (e.g. Pinnacle 400e DVB-S USB2.0). - * - * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes. - * - * TDA8263 + TDA10086 - * - * I2C addresses: - * 0x08 - LNBP21PD - LNB power supply - * 0x0e - TDA10086 - Demodulator - * 0x50 - FX2 eeprom - * 0x60 - TDA8263 - Tuner - * 0x78 ??? - * - * Copyright (c) 2002 Holger Waechtler <holger@convergence.de> - * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net> - * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#define DVB_USB_LOG_PREFIX "ttusb2" -#include "dvb-usb.h" - -#include "ttusb2.h" - -#include "tda826x.h" -#include "tda10086.h" -#include "tda1002x.h" -#include "tda827x.h" -#include "lnbp21.h" - -/* debug */ -static int dvb_usb_ttusb2_debug; -#define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args) -module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct ttusb2_state { - u8 id; - u16 last_rc_key; -}; - -static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd, - u8 *wbuf, int wlen, u8 *rbuf, int rlen) -{ - struct ttusb2_state *st = d->priv; - u8 s[wlen+4],r[64] = { 0 }; - int ret = 0; - - memset(s,0,wlen+4); - - s[0] = 0xaa; - s[1] = ++st->id; - s[2] = cmd; - s[3] = wlen; - memcpy(&s[4],wbuf,wlen); - - ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0); - - if (ret != 0 || - r[0] != 0x55 || - r[1] != s[1] || - r[2] != cmd || - (rlen > 0 && r[3] != rlen)) { - warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]); - return -EIO; - } - - if (rlen > 0) - memcpy(rbuf, &r[4], rlen); - - return 0; -} - -static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - static u8 obuf[60], ibuf[60]; - int i,read; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - if (num > 2) - warn("more than 2 i2c messages at a time is not handled yet. TODO."); - - for (i = 0; i < num; i++) { - read = i+1 < num && (msg[i+1].flags & I2C_M_RD); - - obuf[0] = (msg[i].addr << 1) | read; - obuf[1] = msg[i].len; - - /* read request */ - if (read) - obuf[2] = msg[i+1].len; - else - obuf[2] = 0; - - memcpy(&obuf[3],msg[i].buf,msg[i].len); - - if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) { - err("i2c transfer failed."); - break; - } - - if (read) { - memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len); - i++; - } - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 ttusb2_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm ttusb2_i2c_algo = { - .master_xfer = ttusb2_i2c_xfer, - .functionality = ttusb2_i2c_func, -}; - -/* command to poll IR receiver (copied from pctv452e.c) */ -#define CMD_GET_IR_CODE 0x1b - -/* IR */ -static int tt3650_rc_query(struct dvb_usb_device *d) -{ - int ret; - u8 rx[9]; /* A CMD_GET_IR_CODE reply is 9 bytes long */ - struct ttusb2_state *st = d->priv; - ret = ttusb2_msg(d, CMD_GET_IR_CODE, NULL, 0, rx, sizeof(rx)); - if (ret != 0) - return ret; - - if (rx[8] & 0x01) { - /* got a "press" event */ - st->last_rc_key = (rx[3] << 8) | rx[2]; - deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]); - rc_keydown(d->rc_dev, st->last_rc_key, 0); - } else if (st->last_rc_key) { - rc_keyup(d->rc_dev); - st->last_rc_key = 0; - } - - return 0; -} - - -/* Callbacks for DVB USB */ -static int ttusb2_identify_state (struct usb_device *udev, struct - dvb_usb_device_properties *props, struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0; - return 0; -} - -static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 b = onoff; - ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0); - return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0); -} - - -static struct tda10086_config tda10086_config = { - .demod_address = 0x0e, - .invert = 0, - .diseqc_tone = 1, - .xtal_freq = TDA10086_XTAL_16M, -}; - -static struct tda10023_config tda10023_config = { - .demod_address = 0x0c, - .invert = 0, - .xtal = 16000000, - .pll_m = 11, - .pll_p = 3, - .pll_n = 1, - .deltaf = 0xa511, -}; - -static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap) -{ - if (usb_set_interface(adap->dev->udev,0,3) < 0) - err("set interface to alts=3 failed"); - - if ((adap->fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) { - deb_info("TDA10086 attach failed\n"); - return -ENODEV; - } - - return 0; -} - -static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap) -{ - if (usb_set_interface(adap->dev->udev, 0, 3) < 0) - err("set interface to alts=3 failed"); - if ((adap->fe = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) { - deb_info("TDA10023 attach failed\n"); - return -ENODEV; - } - return 0; -} - -static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap) -{ - if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) { - printk(KERN_ERR "%s: No tda827x found!\n", __func__); - return -ENODEV; - } - return 0; -} - -static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap) -{ - if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) { - deb_info("TDA8263 attach failed\n"); - return -ENODEV; - } - - if (dvb_attach(lnbp21_attach, adap->fe, &adap->dev->i2c_adap, 0, 0) == NULL) { - deb_info("LNBP21 attach failed\n"); - return -ENODEV; - } - return 0; -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties ttusb2_properties; -static struct dvb_usb_device_properties ttusb2_properties_s2400; -static struct dvb_usb_device_properties ttusb2_properties_ct3650; - -static int ttusb2_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - if (0 == dvb_usb_device_init(intf, &ttusb2_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650, - THIS_MODULE, NULL, adapter_nr)) - return 0; - return -ENODEV; -} - -static struct usb_device_id ttusb2_table [] = { - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) }, - { USB_DEVICE(USB_VID_TECHNOTREND, - USB_PID_TECHNOTREND_CONNECT_S2400) }, - { USB_DEVICE(USB_VID_TECHNOTREND, - USB_PID_TECHNOTREND_CONNECT_CT3650) }, - {} /* Terminating entry */ -}; -MODULE_DEVICE_TABLE (usb, ttusb2_table); - -static struct dvb_usb_device_properties ttusb2_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-pctv-400e-01.fw", - - .size_of_priv = sizeof(struct ttusb2_state), - - .num_adapters = 1, - .adapter = { - { - .streaming_ctrl = NULL, // ttusb2_streaming_ctrl, - - .frontend_attach = ttusb2_frontend_tda10086_attach, - .tuner_attach = ttusb2_tuner_tda826x_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_ISOC, - .count = 5, - .endpoint = 0x02, - .u = { - .isoc = { - .framesperurb = 4, - .framesize = 940, - .interval = 1, - } - } - } - } - }, - - .power_ctrl = ttusb2_power_ctrl, - .identify_state = ttusb2_identify_state, - - .i2c_algo = &ttusb2_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 2, - .devices = { - { "Pinnacle 400e DVB-S USB2.0", - { &ttusb2_table[0], NULL }, - { NULL }, - }, - { "Pinnacle 450e DVB-S USB2.0", - { &ttusb2_table[1], NULL }, - { NULL }, - }, - } -}; - -static struct dvb_usb_device_properties ttusb2_properties_s2400 = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-tt-s2400-01.fw", - - .size_of_priv = sizeof(struct ttusb2_state), - - .num_adapters = 1, - .adapter = { - { - .streaming_ctrl = NULL, - - .frontend_attach = ttusb2_frontend_tda10086_attach, - .tuner_attach = ttusb2_tuner_tda826x_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_ISOC, - .count = 5, - .endpoint = 0x02, - .u = { - .isoc = { - .framesperurb = 4, - .framesize = 940, - .interval = 1, - } - } - } - } - }, - - .power_ctrl = ttusb2_power_ctrl, - .identify_state = ttusb2_identify_state, - - .i2c_algo = &ttusb2_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "Technotrend TT-connect S-2400", - { &ttusb2_table[2], NULL }, - { NULL }, - }, - } -}; - -static struct dvb_usb_device_properties ttusb2_properties_ct3650 = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .size_of_priv = sizeof(struct ttusb2_state), - - .rc.core = { - .rc_interval = 150, /* Less than IR_KEYPRESS_TIMEOUT */ - .rc_codes = RC_MAP_TT_1500, - .rc_query = tt3650_rc_query, - .allowed_protos = RC_TYPE_UNKNOWN, - }, - - .num_adapters = 1, - .adapter = { - { - .streaming_ctrl = NULL, - - .frontend_attach = ttusb2_frontend_tda10023_attach, - .tuner_attach = ttusb2_tuner_tda827x_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_ISOC, - .count = 5, - .endpoint = 0x02, - .u = { - .isoc = { - .framesperurb = 4, - .framesize = 940, - .interval = 1, - } - } - } - }, - }, - - .power_ctrl = ttusb2_power_ctrl, - .identify_state = ttusb2_identify_state, - - .i2c_algo = &ttusb2_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "Technotrend TT-connect CT-3650", - .warm_ids = { &ttusb2_table[3], NULL }, - }, - } -}; - -static struct usb_driver ttusb2_driver = { - .name = "dvb_usb_ttusb2", - .probe = ttusb2_probe, - .disconnect = dvb_usb_device_exit, - .id_table = ttusb2_table, -}; - -/* module stuff */ -static int __init ttusb2_module_init(void) -{ - int result; - if ((result = usb_register(&ttusb2_driver))) { - err("usb_register failed. Error number %d",result); - return result; - } - - return 0; -} - -static void __exit ttusb2_module_exit(void) -{ - /* deregister this driver from the USB subsystem */ - usb_deregister(&ttusb2_driver); -} - -module_init (ttusb2_module_init); -module_exit (ttusb2_module_exit); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); |
