1 files changed, 0 insertions, 100 deletions
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
deleted file mode 100644
index 5244e39770a..00000000000
--- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* dvb-usb-firmware.c is part of the DVB USB library.
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- * see dvb-usb-init.c for copyright information.
- *
- * This file contains functions for downloading the firmware to Cypress FX 1 and 2 based devices.
- *
- * FIXME: This part does actually not belong to dvb-usb, but to the usb-subsystem.
- */
-#include "dvb-usb-common.h"
-
-#include <linux/firmware.h>
-#include <linux/usb.h>
-
-struct usb_cypress_controller {
-	int id;
-	const char *name;       /* name of the usb controller */
-	u16 cpu_cs_register;    /* needs to be restarted, when the firmware has been downloaded. */
-};
-
-static struct usb_cypress_controller cypress[] = {
-	{ .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 },
-	{ .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 },
-	{ .id = CYPRESS_FX2,    .name = "Cypress FX2",    .cpu_cs_register = 0xe600 },
-};
-
-/*
- * load a firmware packet to the device
- */
-static int usb_cypress_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len)
-{
-	return usb_control_msg(udev, usb_sndctrlpipe(udev,0),
-			0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5*HZ);
-}
-
-int usb_cypress_load_firmware(struct usb_device *udev, const char *filename, int type)
-{
-	const struct firmware *fw = NULL;
-	u16 addr;
-	u8 *b,*p;
-	int ret = 0,i;
-
-	if ((ret = request_firmware(&fw, filename, &udev->dev)) != 0) {
-		err("did not find the firmware file. (%s) "
-			"Please see linux/Documentation/dvb/ for more details on firmware-problems.",
-			filename);
-		return ret;
-	}
-
-	info("downloading firmware from file '%s' to the '%s'",filename,cypress[type].name);
-
-	p = kmalloc(fw->size,GFP_KERNEL);
-	if (p != NULL) {
-		u8 reset;
-		/*
-		 * you cannot use the fw->data as buffer for
-		 * usb_control_msg, a new buffer has to be
-		 * created
-		 */
-		memcpy(p,fw->data,fw->size);
-
-		/* stop the CPU */
-		reset = 1;
-		if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1)
-			err("could not stop the USB controller CPU.");
-		for(i = 0; p[i+3] == 0 && i < fw->size; ) {
-			b = (u8 *) &p[i];
-			addr = cpu_to_le16( *((u16 *) &b[1]) );
-
-			deb_fw("writing to address 0x%04x (buffer: 0x%02x%02x)\n",addr,b[1],b[2]);
-
-			ret = usb_cypress_writemem(udev,addr,&b[4],b[0]);
-
-			if (ret != b[0]) {
-				err("error while transferring firmware "
-					"(transferred size: %d, block size: %d)",
-					ret,b[0]);
-				ret = -EINVAL;
-				break;
-			}
-			i += 5 + b[0];
-		}
-		/* length in ret */
-		if (ret > 0)
-			ret = 0;
-		/* restart the CPU */
-		reset = 0;
-		if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) {
-			err("could not restart the USB controller CPU.");
-			ret = -EINVAL;
-		}
-
-		kfree(p);
-	} else {
-		ret = -ENOMEM;
-	}
-	release_firmware(fw);
-
-	return ret;
-}