diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb/ce6230.c')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/ce6230.c | 334 | 
1 files changed, 0 insertions, 334 deletions
diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c deleted file mode 100644 index 3df2045b7d2..00000000000 --- a/drivers/media/dvb/dvb-usb/ce6230.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * DVB USB Linux driver for Intel CE6230 DVB-T USB2.0 receiver - * - * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> - * - *    This program is free software; you can redistribute it and/or modify - *    it under the terms of the GNU General Public License as published by - *    the Free Software Foundation; either version 2 of the License, or - *    (at your option) any later version. - * - *    This program is distributed in the hope that it will be useful, - *    but WITHOUT ANY WARRANTY; without even the implied warranty of - *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the - *    GNU General Public License for more details. - * - *    You should have received a copy of the GNU General Public License - *    along with this program; if not, write to the Free Software - *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include "ce6230.h" -#include "zl10353.h" -#include "mxl5005s.h" - -/* debug */ -static int dvb_usb_ce6230_debug; -module_param_named(debug, dvb_usb_ce6230_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static struct zl10353_config ce6230_zl10353_config; - -static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) -{ -	int ret; -	unsigned int pipe; -	u8 request; -	u8 requesttype; -	u16 value; -	u16 index; -	u8 buf[req->data_len]; - -	request = req->cmd; -	value = req->value; -	index = req->index; - -	switch (req->cmd) { -	case I2C_READ: -	case DEMOD_READ: -	case REG_READ: -		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); -		break; -	case I2C_WRITE: -	case DEMOD_WRITE: -	case REG_WRITE: -		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); -		break; -	default: -		err("unknown command:%02x", req->cmd); -		ret = -EPERM; -		goto error; -	} - -	if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) { -		/* write */ -		memcpy(buf, req->data, req->data_len); -		pipe = usb_sndctrlpipe(udev, 0); -	} else { -		/* read */ -		pipe = usb_rcvctrlpipe(udev, 0); -	} - -	msleep(1); /* avoid I2C errors */ - -	ret = usb_control_msg(udev, pipe, request, requesttype, value, index, -				buf, sizeof(buf), CE6230_USB_TIMEOUT); - -	ce6230_debug_dump(request, requesttype, value, index, buf, -		req->data_len, deb_xfer); - -	if (ret < 0) -		deb_info("%s: usb_control_msg failed:%d\n", __func__, ret); -	else -		ret = 0; - -	/* read request, copy returned data to return buf */ -	if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) -		memcpy(req->data, buf, req->data_len); - -error: -	return ret; -} - -static int ce6230_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) -{ -	return ce6230_rw_udev(d->udev, req); -} - -/* I2C */ -static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], -			   int num) -{ -	struct dvb_usb_device *d = i2c_get_adapdata(adap); -	int i = 0; -	struct req_t req; -	int ret = 0; -	memset(&req, 0, sizeof(req)); - -	if (num > 2) -		return -EINVAL; - -	if (mutex_lock_interruptible(&d->i2c_mutex) < 0) -		return -EAGAIN; - -	while (i < num) { -		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { -			if (msg[i].addr == -				ce6230_zl10353_config.demod_address) { -				req.cmd = DEMOD_READ; -				req.value = msg[i].addr >> 1; -				req.index = msg[i].buf[0]; -				req.data_len = msg[i+1].len; -				req.data = &msg[i+1].buf[0]; -				ret = ce6230_ctrl_msg(d, &req); -			} else { -				err("i2c read not implemented"); -				ret = -EPERM; -			} -			i += 2; -		} else { -			if (msg[i].addr == -				ce6230_zl10353_config.demod_address) { -				req.cmd = DEMOD_WRITE; -				req.value = msg[i].addr >> 1; -				req.index = msg[i].buf[0]; -				req.data_len = msg[i].len-1; -				req.data = &msg[i].buf[1]; -				ret = ce6230_ctrl_msg(d, &req); -			} else { -				req.cmd = I2C_WRITE; -				req.value = 0x2000 + (msg[i].addr >> 1); -				req.index = 0x0000; -				req.data_len = msg[i].len; -				req.data = &msg[i].buf[0]; -				ret = ce6230_ctrl_msg(d, &req); -			} -			i += 1; -		} -		if (ret) -			break; -	} - -	mutex_unlock(&d->i2c_mutex); -	return ret ? ret : i; -} - -static u32 ce6230_i2c_func(struct i2c_adapter *adapter) -{ -	return I2C_FUNC_I2C; -} - -static struct i2c_algorithm ce6230_i2c_algo = { -	.master_xfer   = ce6230_i2c_xfer, -	.functionality = ce6230_i2c_func, -}; - -/* Callbacks for DVB USB */ -static struct zl10353_config ce6230_zl10353_config = { -	.demod_address = 0x1e, -	.adc_clock = 450000, -	.if2 = 45700, -	.no_tuner = 1, -	.parallel_ts = 1, -	.clock_ctl_1 = 0x34, -	.pll_0 = 0x0e, -}; - -static int ce6230_zl10353_frontend_attach(struct dvb_usb_adapter *adap) -{ -	deb_info("%s:\n", __func__); -	adap->fe = dvb_attach(zl10353_attach, &ce6230_zl10353_config, -		&adap->dev->i2c_adap); -	if (adap->fe == NULL) -		return -ENODEV; -	return 0; -} - -static struct mxl5005s_config ce6230_mxl5003s_config = { -	.i2c_address     = 0xc6, -	.if_freq         = IF_FREQ_4570000HZ, -	.xtal_freq       = CRYSTAL_FREQ_16000000HZ, -	.agc_mode        = MXL_SINGLE_AGC, -	.tracking_filter = MXL_TF_DEFAULT, -	.rssi_enable     = MXL_RSSI_ENABLE, -	.cap_select      = MXL_CAP_SEL_ENABLE, -	.div_out         = MXL_DIV_OUT_4, -	.clock_out       = MXL_CLOCK_OUT_DISABLE, -	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM, -	.top		 = MXL5005S_TOP_25P2, -	.mod_mode        = MXL_DIGITAL_MODE, -	.if_mode         = MXL_ZERO_IF, -	.AgcMasterByte   = 0x00, -}; - -static int ce6230_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) -{ -	int ret; -	deb_info("%s:\n", __func__); -	ret = dvb_attach(mxl5005s_attach, adap->fe, &adap->dev->i2c_adap, -			&ce6230_mxl5003s_config) == NULL ? -ENODEV : 0; -	return ret; -} - -static int ce6230_power_ctrl(struct dvb_usb_device *d, int onoff) -{ -	int ret; -	deb_info("%s: onoff:%d\n", __func__, onoff); - -	/* InterfaceNumber 1 / AlternateSetting 0     idle -	   InterfaceNumber 1 / AlternateSetting 1     streaming */ -	ret = usb_set_interface(d->udev, 1, onoff); -	if (ret) -		err("usb_set_interface failed with error:%d", ret); - -	return ret; -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties ce6230_properties; - -static int ce6230_probe(struct usb_interface *intf, -			const struct usb_device_id *id) -{ -	int ret = 0; -	struct dvb_usb_device *d = NULL; - -	deb_info("%s: interface:%d\n", __func__, -		intf->cur_altsetting->desc.bInterfaceNumber); - -	if (intf->cur_altsetting->desc.bInterfaceNumber == 1) { -		ret = dvb_usb_device_init(intf, &ce6230_properties, THIS_MODULE, -			&d, adapter_nr); -		if (ret) -			err("init failed with error:%d\n", ret); -	} - -	return ret; -} - -static struct usb_device_id ce6230_table[] = { -	{ USB_DEVICE(USB_VID_INTEL, USB_PID_INTEL_CE9500) }, -	{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A310) }, -	{ } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, ce6230_table); - -static struct dvb_usb_device_properties ce6230_properties = { -	.caps = DVB_USB_IS_AN_I2C_ADAPTER, - -	.usb_ctrl = DEVICE_SPECIFIC, -	.no_reconnect = 1, - -	.size_of_priv = 0, - -	.num_adapters = 1, -	.adapter = { -		{ -			.frontend_attach  = ce6230_zl10353_frontend_attach, -			.tuner_attach     = ce6230_mxl5003s_tuner_attach, -			.stream = { -				.type = USB_BULK, -				.count = 6, -				.endpoint = 0x82, -				.u = { -					.bulk = { -						.buffersize = (16*512), -					} -				} -			}, -		} -	}, - -	.power_ctrl = ce6230_power_ctrl, - -	.i2c_algo = &ce6230_i2c_algo, - -	.num_device_descs = 2, -	.devices = { -		{ -			.name = "Intel CE9500 reference design", -			.cold_ids = {NULL}, -			.warm_ids = {&ce6230_table[0], NULL}, -		}, -		{ -			.name = "AVerMedia A310 USB 2.0 DVB-T tuner", -			.cold_ids = {NULL}, -			.warm_ids = {&ce6230_table[1], NULL}, -		}, -	} -}; - -static struct usb_driver ce6230_driver = { -	.name       = "dvb_usb_ce6230", -	.probe      = ce6230_probe, -	.disconnect = dvb_usb_device_exit, -	.id_table   = ce6230_table, -}; - -/* module stuff */ -static int __init ce6230_module_init(void) -{ -	int ret; -	deb_info("%s:\n", __func__); -	ret = usb_register(&ce6230_driver); -	if (ret) -		err("usb_register failed with error:%d", ret); - -	return ret; -} - -static void __exit ce6230_module_exit(void) -{ -	deb_info("%s:\n", __func__); -	/* deregister this driver from the USB subsystem */ -	usb_deregister(&ce6230_driver); -} - -module_init(ce6230_module_init); -module_exit(ce6230_module_exit); - -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Driver for Intel CE6230 DVB-T USB2.0"); -MODULE_LICENSE("GPL");  | 
