aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/b2c2/flexcop-fe-tuner.c')
-rw-r--r--drivers/media/dvb/b2c2/flexcop-fe-tuner.c413
1 files changed, 0 insertions, 413 deletions
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
deleted file mode 100644
index 0410cc96a48..00000000000
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
- *
- * see flexcop.c for copyright information.
- */
-#include "flexcop.h"
-
-#include "stv0299.h"
-#include "mt352.h"
-#include "nxt2002.h"
-#include "bcm3510.h"
-#include "stv0297.h"
-#include "mt312.h"
-
-/* lnb control */
-
-static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
- struct flexcop_device *fc = fe->dvb->priv;
- flexcop_ibi_value v;
- deb_tuner("polarity/voltage = %u\n", voltage);
-
- v = fc->read_ibi_reg(fc, misc_204);
- switch (voltage) {
- case SEC_VOLTAGE_OFF:
- v.misc_204.ACPI1_sig = 1;
- break;
- case SEC_VOLTAGE_13:
- v.misc_204.ACPI1_sig = 0;
- v.misc_204.LNB_L_H_sig = 0;
- break;
- case SEC_VOLTAGE_18:
- v.misc_204.ACPI1_sig = 0;
- v.misc_204.LNB_L_H_sig = 1;
- break;
- default:
- err("unknown SEC_VOLTAGE value");
- return -EINVAL;
- }
- return fc->write_ibi_reg(fc, misc_204, v);
-}
-
-static int flexcop_sleep(struct dvb_frontend* fe)
-{
- struct flexcop_device *fc = fe->dvb->priv;
-/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
-
- if (fc->fe_sleep)
- return fc->fe_sleep(fe);
-
-/* v.misc_204.ACPI3_sig = 1;
- fc->write_ibi_reg(fc,misc_204,v);*/
-
- return 0;
-}
-
-static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
-{
- /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
- struct flexcop_device *fc = fe->dvb->priv;
- flexcop_ibi_value v;
- u16 ax;
- v.raw = 0;
-
- deb_tuner("tone = %u\n",tone);
-
- switch (tone) {
- case SEC_TONE_ON:
- ax = 0x01ff;
- break;
- case SEC_TONE_OFF:
- ax = 0;
- break;
- default:
- err("unknown SEC_TONE value");
- return -EINVAL;
- }
-
- v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
-
- v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
- v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
-
- return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
-}
-
-static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
-{
- flexcop_set_tone(fe, SEC_TONE_ON);
- udelay(data ? 500 : 1000);
- flexcop_set_tone(fe, SEC_TONE_OFF);
- udelay(data ? 1000 : 500);
-}
-
-static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
-{
- int i, par = 1, d;
-
- for (i = 7; i >= 0; i--) {
- d = (data >> i) & 1;
- par ^= d;
- flexcop_diseqc_send_bit(fe, d);
- }
-
- flexcop_diseqc_send_bit(fe, par);
-}
-
-static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
-{
- int i;
-
- flexcop_set_tone(fe, SEC_TONE_OFF);
- mdelay(16);
-
- for (i = 0; i < len; i++)
- flexcop_diseqc_send_byte(fe,msg[i]);
-
- mdelay(16);
-
- if (burst != -1) {
- if (burst)
- flexcop_diseqc_send_byte(fe, 0xff);
- else {
- flexcop_set_tone(fe, SEC_TONE_ON);
- udelay(12500);
- flexcop_set_tone(fe, SEC_TONE_OFF);
- }
- msleep(20);
- }
- return 0;
-}
-
-static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
-{
- return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
-}
-
-static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
-{
- return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
-}
-
-/* dvb-s stv0299 */
-static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
- u8 aclk = 0;
- u8 bclk = 0;
-
- if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
- else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
- else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
- else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
- else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
- else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
- stv0299_writereg (fe, 0x13, aclk);
- stv0299_writereg (fe, 0x14, bclk);
- stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
-
- return 0;
-}
-
-static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
-{
- u8 buf[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
- struct flexcop_device *fc = fe->dvb->priv;
-
- div = params->frequency / 125;
-
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = div & 0xff;
- buf[2] = 0x84; /* 0xC4 */
- buf[3] = 0x08;
-
- if (params->frequency < 1500000) buf[3] |= 0x10;
-
- if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
-static u8 samsung_tbmu24112_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7D,
- 0x05, 0x35,
- 0x06, 0x02,
- 0x07, 0x00,
- 0x08, 0xC3,
- 0x0C, 0x00,
- 0x0D, 0x81,
- 0x0E, 0x23,
- 0x0F, 0x12,
- 0x10, 0x7E,
- 0x11, 0x84,
- 0x12, 0xB9,
- 0x13, 0x88,
- 0x14, 0x89,
- 0x15, 0xC9,
- 0x16, 0x00,
- 0x17, 0x5C,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1A, 0x00,
- 0x1C, 0x00,
- 0x1D, 0x00,
- 0x1E, 0x00,
- 0x1F, 0x3A,
- 0x20, 0x2E,
- 0x21, 0x80,
- 0x22, 0xFF,
- 0x23, 0xC1,
- 0x28, 0x00,
- 0x29, 0x1E,
- 0x2A, 0x14,
- 0x2B, 0x0F,
- 0x2C, 0x09,
- 0x2D, 0x05,
- 0x31, 0x1F,
- 0x32, 0x19,
- 0x33, 0xFE,
- 0x34, 0x93,
- 0xff, 0xff,
-};
-
-static struct stv0299_config samsung_tbmu24112_config = {
- .demod_address = 0x68,
- .inittab = samsung_tbmu24112_inittab,
- .mclk = 88000000UL,
- .invert = 0,
- .enhanced_tuning = 0,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_LK,
- .volt13_op0_op1 = STV0299_VOLT13_OP1,
- .min_delay_ms = 100,
- .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
- .pll_set = samsung_tbmu24112_pll_set,
-};
-
-/* dvb-t mt352 */
-static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
-{
- static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
- static u8 mt352_reset [] = { 0x50, 0x80 };
- static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
- static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
- static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
- mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
- udelay(2000);
- mt352_write(fe, mt352_reset, sizeof(mt352_reset));
- mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-
- mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
- mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-
- return 0;
-}
-
-static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
-{
- u32 div;
- unsigned char bs = 0;
-
- #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
- div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-
- if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
- if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
- if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
-
- pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
- pllbuf[1] = div >> 8;
- pllbuf[2] = div & 0xff;
- pllbuf[3] = 0xcc;
- pllbuf[4] = bs;
-
- return 0;
-}
-
-static struct mt352_config samsung_tdtc9251dh0_config = {
- .demod_address = 0x0f,
- .demod_init = samsung_tdtc9251dh0_demod_init,
- .pll_set = samsung_tdtc9251dh0_pll_set,
-};
-
-static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
-{
- struct flexcop_device *fc = fe->dvb->priv;
- return request_firmware(fw, name, fc->dev);
-}
-
-static struct nxt2002_config samsung_tbmv_config = {
- .demod_address = 0x0a,
- .request_firmware = flexcop_fe_request_firmware,
-};
-
-static struct bcm3510_config air2pc_atsc_first_gen_config = {
- .demod_address = 0x0f,
- .request_firmware = flexcop_fe_request_firmware,
-};
-
-static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
-{
- u8 buf[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
- struct flexcop_device *fc = fe->dvb->priv;
-
- div = (params->frequency + (125/2)) / 125;
-
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = (div >> 0) & 0xff;
- buf[2] = 0x84 | ((div >> 10) & 0x60);
- buf[3] = 0x80;
-
- if (params->frequency < 1550000)
- buf[3] |= 0x02;
-
- if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
-static struct mt312_config skystar23_samsung_tbdu18132_config = {
-
- .demod_address = 0x0e,
- .pll_set = skystar23_samsung_tbdu18132_pll_set,
-};
-
-static struct stv0297_config alps_tdee4_stv0297_config = {
- .demod_address = 0x1c,
-// .invert = 1,
-// .pll_set = alps_tdee4_stv0297_pll_set,
-};
-
-/* try to figure out the frontend, each card/box can have on of the following list */
-int flexcop_frontend_init(struct flexcop_device *fc)
-{
- /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
- if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
- fc->fe->ops->set_voltage = flexcop_set_voltage;
-
- fc->fe_sleep = fc->fe->ops->sleep;
- fc->fe->ops->sleep = flexcop_sleep;
-
- fc->dev_type = FC_SKY;
- info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
- } else
- /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
- if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
- fc->dev_type = FC_AIR_DVB;
- info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
- } else
- /* try the air atsc 2nd generation (nxt2002) */
- if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
- fc->dev_type = FC_AIR_ATSC2;
- info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
- } else
- /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
- if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) {
- fc->dev_type = FC_AIR_ATSC1;
- info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address);
- } else
- /* try the cable dvb (stv0297) */
- if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
- fc->dev_type = FC_CABLE;
- info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
- } else
- /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
- if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
- fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
- fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst;
- fc->fe->ops->set_tone = flexcop_set_tone;
- fc->fe->ops->set_voltage = flexcop_set_voltage;
-
- fc->fe_sleep = fc->fe->ops->sleep;
- fc->fe->ops->sleep = flexcop_sleep;
-
- fc->dev_type = FC_SKY_OLD;
- info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
- }
-
- if (fc->fe == NULL) {
- err("no frontend driver found for this B2C2/FlexCop adapter");
- return -ENODEV;
- } else {
- if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
- err("frontend registration failed!");
- if (fc->fe->ops->release != NULL)
- fc->fe->ops->release(fc->fe);
- fc->fe = NULL;
- return -EINVAL;
- }
- }
- fc->init_state |= FC_STATE_FE_INIT;
- return 0;
-}
-
-void flexcop_frontend_exit(struct flexcop_device *fc)
-{
- if (fc->init_state & FC_STATE_FE_INIT)
- dvb_unregister_frontend(fc->fe);
-
- fc->init_state &= ~FC_STATE_FE_INIT;
-}