diff options
Diffstat (limited to 'drivers/md/bcache/closure.h')
| -rw-r--r-- | drivers/md/bcache/closure.h | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/drivers/md/bcache/closure.h b/drivers/md/bcache/closure.h new file mode 100644 index 00000000000..a08e3eeac3c --- /dev/null +++ b/drivers/md/bcache/closure.h @@ -0,0 +1,386 @@ +#ifndef _LINUX_CLOSURE_H +#define _LINUX_CLOSURE_H + +#include <linux/llist.h> +#include <linux/sched.h> +#include <linux/workqueue.h> + +/* + * Closure is perhaps the most overused and abused term in computer science, but + * since I've been unable to come up with anything better you're stuck with it + * again. + * + * What are closures? + * + * They embed a refcount. The basic idea is they count "things that are in + * progress" - in flight bios, some other thread that's doing something else - + * anything you might want to wait on. + * + * The refcount may be manipulated with closure_get() and closure_put(). + * closure_put() is where many of the interesting things happen, when it causes + * the refcount to go to 0. + * + * Closures can be used to wait on things both synchronously and asynchronously, + * and synchronous and asynchronous use can be mixed without restriction. To + * wait synchronously, use closure_sync() - you will sleep until your closure's + * refcount hits 1. + * + * To wait asynchronously, use + * continue_at(cl, next_function, workqueue); + * + * passing it, as you might expect, the function to run when nothing is pending + * and the workqueue to run that function out of. + * + * continue_at() also, critically, is a macro that returns the calling function. + * There's good reason for this. + * + * To use safely closures asynchronously, they must always have a refcount while + * they are running owned by the thread that is running them. Otherwise, suppose + * you submit some bios and wish to have a function run when they all complete: + * + * foo_endio(struct bio *bio, int error) + * { + * closure_put(cl); + * } + * + * closure_init(cl); + * + * do_stuff(); + * closure_get(cl); + * bio1->bi_endio = foo_endio; + * bio_submit(bio1); + * + * do_more_stuff(); + * closure_get(cl); + * bio2->bi_endio = foo_endio; + * bio_submit(bio2); + * + * continue_at(cl, complete_some_read, system_wq); + * + * If closure's refcount started at 0, complete_some_read() could run before the + * second bio was submitted - which is almost always not what you want! More + * importantly, it wouldn't be possible to say whether the original thread or + * complete_some_read()'s thread owned the closure - and whatever state it was + * associated with! + * + * So, closure_init() initializes a closure's refcount to 1 - and when a + * closure_fn is run, the refcount will be reset to 1 first. + * + * Then, the rule is - if you got the refcount with closure_get(), release it + * with closure_put() (i.e, in a bio->bi_endio function). If you have a refcount + * on a closure because you called closure_init() or you were run out of a + * closure - _always_ use continue_at(). Doing so consistently will help + * eliminate an entire class of particularly pernicious races. + * + * Lastly, you might have a wait list dedicated to a specific event, and have no + * need for specifying the condition - you just want to wait until someone runs + * closure_wake_up() on the appropriate wait list. In that case, just use + * closure_wait(). It will return either true or false, depending on whether the + * closure was already on a wait list or not - a closure can only be on one wait + * list at a time. + * + * Parents: + * + * closure_init() takes two arguments - it takes the closure to initialize, and + * a (possibly null) parent. + * + * If parent is non null, the new closure will have a refcount for its lifetime; + * a closure is considered to be "finished" when its refcount hits 0 and the + * function to run is null. Hence + * + * continue_at(cl, NULL, NULL); + * + * returns up the (spaghetti) stack of closures, precisely like normal return + * returns up the C stack. continue_at() with non null fn is better thought of + * as doing a tail call. + * + * All this implies that a closure should typically be embedded in a particular + * struct (which its refcount will normally control the lifetime of), and that + * struct can very much be thought of as a stack frame. + */ + +struct closure; +typedef void (closure_fn) (struct closure *); + +struct closure_waitlist { + struct llist_head list; +}; + +enum closure_state { + /* + * CLOSURE_WAITING: Set iff the closure is on a waitlist. Must be set by + * the thread that owns the closure, and cleared by the thread that's + * waking up the closure. + * + * CLOSURE_SLEEPING: Must be set before a thread uses a closure to sleep + * - indicates that cl->task is valid and closure_put() may wake it up. + * Only set or cleared by the thread that owns the closure. + * + * The rest are for debugging and don't affect behaviour: + * + * CLOSURE_RUNNING: Set when a closure is running (i.e. by + * closure_init() and when closure_put() runs then next function), and + * must be cleared before remaining hits 0. Primarily to help guard + * against incorrect usage and accidentally transferring references. + * continue_at() and closure_return() clear it for you, if you're doing + * something unusual you can use closure_set_dead() which also helps + * annotate where references are being transferred. + * + * CLOSURE_STACK: Sanity check - remaining should never hit 0 on a + * closure with this flag set + */ + + CLOSURE_BITS_START = (1 << 23), + CLOSURE_DESTRUCTOR = (1 << 23), + CLOSURE_WAITING = (1 << 25), + CLOSURE_SLEEPING = (1 << 27), + CLOSURE_RUNNING = (1 << 29), + CLOSURE_STACK = (1 << 31), +}; + +#define CLOSURE_GUARD_MASK \ + ((CLOSURE_DESTRUCTOR|CLOSURE_WAITING|CLOSURE_SLEEPING| \ + CLOSURE_RUNNING|CLOSURE_STACK) << 1) + +#define CLOSURE_REMAINING_MASK (CLOSURE_BITS_START - 1) +#define CLOSURE_REMAINING_INITIALIZER (1|CLOSURE_RUNNING) + +struct closure { + union { + struct { + struct workqueue_struct *wq; + struct task_struct *task; + struct llist_node list; + closure_fn *fn; + }; + struct work_struct work; + }; + + struct closure *parent; + + atomic_t remaining; + +#ifdef CONFIG_BCACHE_CLOSURES_DEBUG +#define CLOSURE_MAGIC_DEAD 0xc054dead +#define CLOSURE_MAGIC_ALIVE 0xc054a11e + + unsigned magic; + struct list_head all; + unsigned long ip; + unsigned long waiting_on; +#endif +}; + +void closure_sub(struct closure *cl, int v); +void closure_put(struct closure *cl); +void __closure_wake_up(struct closure_waitlist *list); +bool closure_wait(struct closure_waitlist *list, struct closure *cl); +void closure_sync(struct closure *cl); + +#ifdef CONFIG_BCACHE_CLOSURES_DEBUG + +void closure_debug_init(void); +void closure_debug_create(struct closure *cl); +void closure_debug_destroy(struct closure *cl); + +#else + +static inline void closure_debug_init(void) {} +static inline void closure_debug_create(struct closure *cl) {} +static inline void closure_debug_destroy(struct closure *cl) {} + +#endif + +static inline void closure_set_ip(struct closure *cl) +{ +#ifdef CONFIG_BCACHE_CLOSURES_DEBUG + cl->ip = _THIS_IP_; +#endif +} + +static inline void closure_set_ret_ip(struct closure *cl) +{ +#ifdef CONFIG_BCACHE_CLOSURES_DEBUG + cl->ip = _RET_IP_; +#endif +} + +static inline void closure_set_waiting(struct closure *cl, unsigned long f) +{ +#ifdef CONFIG_BCACHE_CLOSURES_DEBUG + cl->waiting_on = f; +#endif +} + +static inline void __closure_end_sleep(struct closure *cl) +{ + __set_current_state(TASK_RUNNING); + + if (atomic_read(&cl->remaining) & CLOSURE_SLEEPING) + atomic_sub(CLOSURE_SLEEPING, &cl->remaining); +} + +static inline void __closure_start_sleep(struct closure *cl) +{ + closure_set_ip(cl); + cl->task = current; + set_current_state(TASK_UNINTERRUPTIBLE); + + if (!(atomic_read(&cl->remaining) & CLOSURE_SLEEPING)) + atomic_add(CLOSURE_SLEEPING, &cl->remaining); +} + +static inline void closure_set_stopped(struct closure *cl) +{ + atomic_sub(CLOSURE_RUNNING, &cl->remaining); +} + +static inline void set_closure_fn(struct closure *cl, closure_fn *fn, + struct workqueue_struct *wq) +{ + BUG_ON(object_is_on_stack(cl)); + closure_set_ip(cl); + cl->fn = fn; + cl->wq = wq; + /* between atomic_dec() in closure_put() */ + smp_mb__before_atomic(); +} + +static inline void closure_queue(struct closure *cl) +{ + struct workqueue_struct *wq = cl->wq; + if (wq) { + INIT_WORK(&cl->work, cl->work.func); + BUG_ON(!queue_work(wq, &cl->work)); + } else + cl->fn(cl); +} + +/** + * closure_get - increment a closure's refcount + */ +static inline void closure_get(struct closure *cl) +{ +#ifdef CONFIG_BCACHE_CLOSURES_DEBUG + BUG_ON((atomic_inc_return(&cl->remaining) & + CLOSURE_REMAINING_MASK) <= 1); +#else + atomic_inc(&cl->remaining); +#endif +} + +/** + * closure_init - Initialize a closure, setting the refcount to 1 + * @cl: closure to initialize + * @parent: parent of the new closure. cl will take a refcount on it for its + * lifetime; may be NULL. + */ +static inline void closure_init(struct closure *cl, struct closure *parent) +{ + memset(cl, 0, sizeof(struct closure)); + cl->parent = parent; + if (parent) + closure_get(parent); + + atomic_set(&cl->remaining, CLOSURE_REMAINING_INITIALIZER); + + closure_debug_create(cl); + closure_set_ip(cl); +} + +static inline void closure_init_stack(struct closure *cl) +{ + memset(cl, 0, sizeof(struct closure)); + atomic_set(&cl->remaining, CLOSURE_REMAINING_INITIALIZER|CLOSURE_STACK); +} + +/** + * closure_wake_up - wake up all closures on a wait list. + */ +static inline void closure_wake_up(struct closure_waitlist *list) +{ + smp_mb(); + __closure_wake_up(list); +} + +/** + * continue_at - jump to another function with barrier + * + * After @cl is no longer waiting on anything (i.e. all outstanding refs have + * been dropped with closure_put()), it will resume execution at @fn running out + * of @wq (or, if @wq is NULL, @fn will be called by closure_put() directly). + * + * NOTE: This macro expands to a return in the calling function! + * + * This is because after calling continue_at() you no longer have a ref on @cl, + * and whatever @cl owns may be freed out from under you - a running closure fn + * has a ref on its own closure which continue_at() drops. + */ +#define continue_at(_cl, _fn, _wq) \ +do { \ + set_closure_fn(_cl, _fn, _wq); \ + closure_sub(_cl, CLOSURE_RUNNING + 1); \ + return; \ +} while (0) + +/** + * closure_return - finish execution of a closure + * + * This is used to indicate that @cl is finished: when all outstanding refs on + * @cl have been dropped @cl's ref on its parent closure (as passed to + * closure_init()) will be dropped, if one was specified - thus this can be + * thought of as returning to the parent closure. + */ +#define closure_return(_cl) continue_at((_cl), NULL, NULL) + +/** + * continue_at_nobarrier - jump to another function without barrier + * + * Causes @fn to be executed out of @cl, in @wq context (or called directly if + * @wq is NULL). + * + * NOTE: like continue_at(), this macro expands to a return in the caller! + * + * The ref the caller of continue_at_nobarrier() had on @cl is now owned by @fn, + * thus it's not safe to touch anything protected by @cl after a + * continue_at_nobarrier(). + */ +#define continue_at_nobarrier(_cl, _fn, _wq) \ +do { \ + set_closure_fn(_cl, _fn, _wq); \ + closure_queue(_cl); \ + return; \ +} while (0) + +/** + * closure_return - finish execution of a closure, with destructor + * + * Works like closure_return(), except @destructor will be called when all + * outstanding refs on @cl have been dropped; @destructor may be used to safely + * free the memory occupied by @cl, and it is called with the ref on the parent + * closure still held - so @destructor could safely return an item to a + * freelist protected by @cl's parent. + */ +#define closure_return_with_destructor(_cl, _destructor) \ +do { \ + set_closure_fn(_cl, _destructor, NULL); \ + closure_sub(_cl, CLOSURE_RUNNING - CLOSURE_DESTRUCTOR + 1); \ + return; \ +} while (0) + +/** + * closure_call - execute @fn out of a new, uninitialized closure + * + * Typically used when running out of one closure, and we want to run @fn + * asynchronously out of a new closure - @parent will then wait for @cl to + * finish. + */ +static inline void closure_call(struct closure *cl, closure_fn fn, + struct workqueue_struct *wq, + struct closure *parent) +{ + closure_init(cl, parent); + continue_at_nobarrier(cl, fn, wq); +} + +#endif /* _LINUX_CLOSURE_H */ |