diff options
Diffstat (limited to 'drivers/leds')
38 files changed, 745 insertions, 664 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 72156c12303..a1b044e7eaa 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -300,16 +300,6 @@ config LEDS_PCA963X LED driver chip accessed via the I2C bus. Supported devices include PCA9633 and PCA9634 -config LEDS_PCA9685 - tristate "LED support for PCA9685 I2C chip" - depends on LEDS_CLASS - depends on I2C - help - This option enables support for LEDs connected to the PCA9685 - LED driver chip accessed via the I2C bus. - The PCA9685 offers 12-bit PWM (4095 levels of brightness) on - 16 individual channels. - config LEDS_WM831X_STATUS tristate "LED support for status LEDs on WM831x PMICs" depends on LEDS_CLASS @@ -416,12 +406,12 @@ config LEDS_MC13783 depends on MFD_MC13XXX help This option enable support for on-chip LED drivers found - on Freescale Semiconductor MC13783/MC13892 PMIC. + on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC. config LEDS_NS2 tristate "LED support for Network Space v2 GPIO LEDs" depends on LEDS_CLASS - depends on ARCH_KIRKWOOD + depends on ARCH_KIRKWOOD || MACH_KIRKWOOD default y help This option enable support for the dual-GPIO LED found on the @@ -431,7 +421,7 @@ config LEDS_NS2 config LEDS_NETXBIG tristate "LED support for Big Network series LEDs" depends on LEDS_CLASS - depends on ARCH_KIRKWOOD + depends on ARCH_KIRKWOOD || MACH_KIRKWOOD default y help This option enable support for LEDs found on the LaCie 2Big @@ -474,11 +464,13 @@ config LEDS_LM355x config LEDS_OT200 tristate "LED support for the Bachmann OT200" - depends on LEDS_CLASS && HAS_IOMEM + depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST) help This option enables support for the LEDs on the Bachmann OT200. Say Y to enable LEDs on the Bachmann OT200. +comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" + config LEDS_BLINKM tristate "LED support for the BlinkM I2C RGB LED" depends on LEDS_CLASS @@ -487,6 +479,14 @@ config LEDS_BLINKM This option enables support for the BlinkM RGB LED connected through I2C. Say Y to enable support for the BlinkM LED. +config LEDS_VERSATILE + tristate "LED support for the ARM Versatile and RealView" + depends on ARCH_REALVIEW || ARCH_VERSATILE + depends on LEDS_CLASS + help + This option enabled support for the LEDs on the ARM Versatile + and RealView boards. Say Y to enabled these. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 3cd76dbd9be..79c5155199a 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -36,7 +36,6 @@ obj-$(CONFIG_LEDS_OT200) += leds-ot200.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o obj-$(CONFIG_LEDS_PCA963X) += leds-pca963x.o -obj-$(CONFIG_LEDS_PCA9685) += leds-pca9685.o obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_DA9052) += leds-da9052.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o @@ -54,6 +53,7 @@ obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o +obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/dell-led.c b/drivers/leds/dell-led.c index e5c57389efd..c36acaf566a 100644 --- a/drivers/leds/dell-led.c +++ b/drivers/leds/dell-led.c @@ -15,12 +15,15 @@ #include <linux/leds.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/dmi.h> +#include <linux/dell-led.h> MODULE_AUTHOR("Louis Davis/Jim Dailey"); MODULE_DESCRIPTION("Dell LED Control Driver"); MODULE_LICENSE("GPL"); #define DELL_LED_BIOS_GUID "F6E4FE6E-909D-47cb-8BAB-C9F6F2F8D396" +#define DELL_APP_GUID "A80593CE-A997-11DA-B012-B622A1EF5492" MODULE_ALIAS("wmi:" DELL_LED_BIOS_GUID); /* Error Result Codes: */ @@ -39,6 +42,149 @@ MODULE_ALIAS("wmi:" DELL_LED_BIOS_GUID); #define CMD_LED_OFF 17 #define CMD_LED_BLINK 18 +struct app_wmi_args { + u16 class; + u16 selector; + u32 arg1; + u32 arg2; + u32 arg3; + u32 arg4; + u32 res1; + u32 res2; + u32 res3; + u32 res4; + char dummy[92]; +}; + +#define GLOBAL_MIC_MUTE_ENABLE 0x364 +#define GLOBAL_MIC_MUTE_DISABLE 0x365 + +struct dell_bios_data_token { + u16 tokenid; + u16 location; + u16 value; +}; + +struct __attribute__ ((__packed__)) dell_bios_calling_interface { + struct dmi_header header; + u16 cmd_io_addr; + u8 cmd_io_code; + u32 supported_cmds; + struct dell_bios_data_token damap[]; +}; + +static struct dell_bios_data_token dell_mic_tokens[2]; + +static int dell_wmi_perform_query(struct app_wmi_args *args) +{ + struct app_wmi_args *bios_return; + union acpi_object *obj; + struct acpi_buffer input; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_status status; + u32 rc = -EINVAL; + + input.length = 128; + input.pointer = args; + + status = wmi_evaluate_method(DELL_APP_GUID, 0, 1, &input, &output); + if (!ACPI_SUCCESS(status)) + goto err_out0; + + obj = output.pointer; + if (!obj) + goto err_out0; + + if (obj->type != ACPI_TYPE_BUFFER) + goto err_out1; + + bios_return = (struct app_wmi_args *)obj->buffer.pointer; + rc = bios_return->res1; + if (rc) + goto err_out1; + + memcpy(args, bios_return, sizeof(struct app_wmi_args)); + rc = 0; + + err_out1: + kfree(obj); + err_out0: + return rc; +} + +static void __init find_micmute_tokens(const struct dmi_header *dm, void *dummy) +{ + struct dell_bios_calling_interface *calling_interface; + struct dell_bios_data_token *token; + int token_size = sizeof(struct dell_bios_data_token); + int i = 0; + + if (dm->type == 0xda && dm->length > 17) { + calling_interface = container_of(dm, + struct dell_bios_calling_interface, header); + + token = &calling_interface->damap[i]; + while (token->tokenid != 0xffff) { + if (token->tokenid == GLOBAL_MIC_MUTE_DISABLE) + memcpy(&dell_mic_tokens[0], token, token_size); + else if (token->tokenid == GLOBAL_MIC_MUTE_ENABLE) + memcpy(&dell_mic_tokens[1], token, token_size); + + i++; + token = &calling_interface->damap[i]; + } + } +} + +static int dell_micmute_led_set(int state) +{ + struct app_wmi_args args; + struct dell_bios_data_token *token; + + if (!wmi_has_guid(DELL_APP_GUID)) + return -ENODEV; + + if (state == 0 || state == 1) + token = &dell_mic_tokens[state]; + else + return -EINVAL; + + memset(&args, 0, sizeof(struct app_wmi_args)); + + args.class = 1; + args.arg1 = token->location; + args.arg2 = token->value; + + dell_wmi_perform_query(&args); + + return state; +} + +int dell_app_wmi_led_set(int whichled, int on) +{ + int state = 0; + + switch (whichled) { + case DELL_LED_MICMUTE: + state = dell_micmute_led_set(on); + break; + default: + pr_warn("led type %x is not supported\n", whichled); + break; + } + + return state; +} +EXPORT_SYMBOL_GPL(dell_app_wmi_led_set); + +static int __init dell_micmute_led_init(void) +{ + memset(dell_mic_tokens, 0, sizeof(struct dell_bios_data_token) * 2); + dmi_walk(find_micmute_tokens, NULL); + + return 0; +} + struct bios_args { unsigned char length; unsigned char result_code; @@ -181,21 +327,32 @@ static int __init dell_led_init(void) { int error = 0; - if (!wmi_has_guid(DELL_LED_BIOS_GUID)) + if (!wmi_has_guid(DELL_LED_BIOS_GUID) && !wmi_has_guid(DELL_APP_GUID)) return -ENODEV; - error = led_off(); - if (error != 0) - return -ENODEV; + if (wmi_has_guid(DELL_APP_GUID)) + error = dell_micmute_led_init(); - return led_classdev_register(NULL, &dell_led); + if (wmi_has_guid(DELL_LED_BIOS_GUID)) { + error = led_off(); + if (error != 0) + return -ENODEV; + + error = led_classdev_register(NULL, &dell_led); + } + + return error; } static void __exit dell_led_exit(void) { - led_classdev_unregister(&dell_led); + int error = 0; - led_off(); + if (wmi_has_guid(DELL_LED_BIOS_GUID)) { + error = led_off(); + if (error == 0) + led_classdev_unregister(&dell_led); + } } module_init(dell_led_init); diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c index ce8921a753a..71b40d3bf77 100644 --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -39,9 +39,11 @@ static void led_set_software_blink(struct led_classdev *led_cdev, led_cdev->blink_delay_on = delay_on; led_cdev->blink_delay_off = delay_off; - /* never on - don't blink */ - if (!delay_on) + /* never on - just set to off */ + if (!delay_on) { + __led_set_brightness(led_cdev, LED_OFF); return; + } /* never off - just set to brightness */ if (!delay_off) { diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c index 3c972b2f989..c3734f10fdd 100644 --- a/drivers/leds/led-triggers.c +++ b/drivers/leds/led-triggers.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/list.h> #include <linux/spinlock.h> #include <linux/device.h> @@ -220,9 +219,12 @@ void led_trigger_unregister(struct led_trigger *trig) { struct led_classdev *led_cdev; + if (list_empty_careful(&trig->next_trig)) + return; + /* Remove from the list of led triggers */ down_write(&triggers_list_lock); - list_del(&trig->next_trig); + list_del_init(&trig->next_trig); up_write(&triggers_list_lock); /* Remove anyone actively using this trigger */ @@ -242,18 +244,14 @@ EXPORT_SYMBOL_GPL(led_trigger_unregister); void led_trigger_event(struct led_trigger *trig, enum led_brightness brightness) { - struct list_head *entry; + struct led_classdev *led_cdev; if (!trig) return; read_lock(&trig->leddev_list_lock); - list_for_each(entry, &trig->led_cdevs) { - struct led_classdev *led_cdev; - - led_cdev = list_entry(entry, struct led_classdev, trig_list); + list_for_each_entry(led_cdev, &trig->led_cdevs, trig_list) led_set_brightness(led_cdev, brightness); - } read_unlock(&trig->leddev_list_lock); } EXPORT_SYMBOL_GPL(led_trigger_event); @@ -264,16 +262,13 @@ static void led_trigger_blink_setup(struct led_trigger *trig, int oneshot, int invert) { - struct list_head *entry; + struct led_classdev *led_cdev; if (!trig) return; read_lock(&trig->leddev_list_lock); - list_for_each(entry, &trig->led_cdevs) { - struct led_classdev *led_cdev; - - led_cdev = list_entry(entry, struct led_classdev, trig_list); + list_for_each_entry(led_cdev, &trig->led_cdevs, trig_list) { if (oneshot) led_blink_set_oneshot(led_cdev, delay_on, delay_off, invert); diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c index 5f588c0a376..c2def5551ce 100644 --- a/drivers/leds/leds-88pm860x.c +++ b/drivers/leds/leds-88pm860x.c @@ -11,7 +11,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/i2c.h> @@ -131,10 +130,9 @@ static int pm860x_led_dt_init(struct platform_device *pdev, struct device_node *nproot, *np; int iset = 0; - nproot = of_node_get(pdev->dev.parent->of_node); - if (!nproot) + if (!pdev->dev.parent->of_node) return -ENODEV; - nproot = of_find_node_by_name(nproot, "leds"); + nproot = of_get_child_by_name(pdev->dev.parent->of_node, "leds"); if (!nproot) { dev_err(&pdev->dev, "failed to find leds node\n"); return -ENODEV; diff --git a/drivers/leds/leds-adp5520.c b/drivers/leds/leds-adp5520.c index 7e311a120b1..5036d7b4f82 100644 --- a/drivers/leds/leds-adp5520.c +++ b/drivers/leds/leds-adp5520.c @@ -15,7 +15,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/workqueue.h> @@ -121,13 +120,10 @@ static int adp5520_led_probe(struct platform_device *pdev) led = devm_kzalloc(&pdev->dev, sizeof(*led) * pdata->num_leds, GFP_KERNEL); - if (led == NULL) { - dev_err(&pdev->dev, "failed to alloc memory\n"); + if (!led) return -ENOMEM; - } ret = adp5520_led_prepare(pdev); - if (ret) { dev_err(&pdev->dev, "failed to write\n"); return ret; diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c index 6de216a89a0..70c74a7f0df 100644 --- a/drivers/leds/leds-asic3.c +++ b/drivers/leds/leds-asic3.c @@ -7,7 +7,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/slab.h> diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index fb5a3472d61..6078c15d345 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -678,10 +678,8 @@ static int bd2802_probe(struct i2c_client *client, int ret, i; led = devm_kzalloc(&client->dev, sizeof(struct bd2802_led), GFP_KERNEL); - if (!led) { - dev_err(&client->dev, "failed to allocate driver data\n"); + if (!led) return -ENOMEM; - } led->client = client; pdata = led->pdata = dev_get_platdata(&client->dev); diff --git a/drivers/leds/leds-blinkm.c b/drivers/leds/leds-blinkm.c index 66d0a57db22..d0452b099ae 100644 --- a/drivers/leds/leds-blinkm.c +++ b/drivers/leds/leds-blinkm.c @@ -18,7 +18,6 @@ */ #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> @@ -444,7 +443,7 @@ static void led_work(struct work_struct *work) { int ret; struct blinkm_led *led; - struct blinkm_data *data ; + struct blinkm_data *data; struct blinkm_work *blm_work = work_to_blmwork(work); led = blm_work->blinkm_led; diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c index d93e2455da5..f58a354428e 100644 --- a/drivers/leds/leds-clevo-mail.c +++ b/drivers/leds/leds-clevo-mail.c @@ -19,7 +19,7 @@ MODULE_AUTHOR("Márton Németh <nm127@freemail.hu>"); MODULE_DESCRIPTION("Clevo mail LED driver"); MODULE_LICENSE("GPL"); -static bool __initdata nodetect; +static bool nodetect; module_param_named(nodetect, nodetect, bool, 0); MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection"); @@ -153,7 +153,7 @@ static struct led_classdev clevo_mail_led = { .flags = LED_CORE_SUSPENDRESUME, }; -static int clevo_mail_led_probe(struct platform_device *pdev) +static int __init clevo_mail_led_probe(struct platform_device *pdev) { return led_classdev_register(&pdev->dev, &clevo_mail_led); } @@ -165,7 +165,6 @@ static int clevo_mail_led_remove(struct platform_device *pdev) } static struct platform_driver clevo_mail_led_driver = { - .probe = clevo_mail_led_probe, .remove = clevo_mail_led_remove, .driver = { .name = KBUILD_MODNAME, diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index 8abcb66db01..910339d86ed 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -3,7 +3,6 @@ * * Control the Cobalt Qube/RaQ front LED */ -#include <linux/init.h> #include <linux/io.h> #include <linux/ioport.h> #include <linux/leds.h> diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c index 2a4b87f8091..54b8b5216b8 100644 --- a/drivers/leds/leds-da903x.c +++ b/drivers/leds/leds-da903x.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/workqueue.h> @@ -109,10 +108,8 @@ static int da903x_led_probe(struct platform_device *pdev) } led = devm_kzalloc(&pdev->dev, sizeof(struct da903x_led), GFP_KERNEL); - if (led == NULL) { - dev_err(&pdev->dev, "failed to alloc memory for LED%d\n", id); + if (!led) return -ENOMEM; - } led->cdev.name = pdata->name; led->cdev.default_trigger = pdata->default_trigger; diff --git a/drivers/leds/leds-da9052.c b/drivers/leds/leds-da9052.c index 865d4faf874..e4da1f460ac 100644 --- a/drivers/leds/leds-da9052.c +++ b/drivers/leds/leds-da9052.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/workqueue.h> @@ -127,8 +126,7 @@ static int da9052_led_probe(struct platform_device *pdev) led = devm_kzalloc(&pdev->dev, sizeof(struct da9052_led) * pled->num_leds, GFP_KERNEL); - if (led == NULL) { - dev_err(&pdev->dev, "Failed to alloc memory\n"); + if (!led) { error = -ENOMEM; goto err; } diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c index b4d5a44cc41..2b4dc738dcd 100644 --- a/drivers/leds/leds-fsg.c +++ b/drivers/leds/leds-fsg.c @@ -16,7 +16,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/module.h> diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 78b0e273a90..57ff20fecf5 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -11,7 +11,6 @@ * */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/leds.h> @@ -204,6 +203,9 @@ static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev) led.default_state = LEDS_GPIO_DEFSTATE_OFF; } + if (of_get_property(child, "retain-state-suspended", NULL)) + led.retain_state_suspended = 1; + ret = create_gpio_led(&led, &priv->leds[priv->num_leds++], &pdev->dev, NULL); if (ret < 0) { @@ -224,6 +226,8 @@ static const struct of_device_id of_gpio_leds_match[] = { { .compatible = "gpio-leds", }, {}, }; + +MODULE_DEVICE_TABLE(of, of_gpio_leds_match); #else /* CONFIG_OF_GPIO */ static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev) { diff --git a/drivers/leds/leds-hp6xx.c b/drivers/leds/leds-hp6xx.c index 366b6055e33..d61a98896c7 100644 --- a/drivers/leds/leds-hp6xx.c +++ b/drivers/leds/leds-hp6xx.c @@ -12,7 +12,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <asm/hd64461.h> diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c index 027ede73b80..e2c642c1169 100644 --- a/drivers/leds/leds-lm3533.c +++ b/drivers/leds/leds-lm3533.c @@ -12,7 +12,6 @@ */ #include <linux/module.h> -#include <linux/init.h> #include <linux/leds.h> #include <linux/mfd/core.h> #include <linux/mutex.h> diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index 05188351711..8ca197af286 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -25,7 +25,6 @@ #include <linux/delay.h> #include <linux/firmware.h> #include <linux/i2c.h> -#include <linux/init.h> #include <linux/leds.h> #include <linux/module.h> #include <linux/mutex.h> @@ -152,12 +151,26 @@ static void lp5521_load_engine(struct lp55xx_chip *chip) lp5521_wait_opmode_done(); } -static void lp5521_stop_engine(struct lp55xx_chip *chip) +static void lp5521_stop_all_engines(struct lp55xx_chip *chip) { lp55xx_write(chip, LP5521_REG_OP_MODE, 0); lp5521_wait_opmode_done(); } +static void lp5521_stop_engine(struct lp55xx_chip *chip) +{ + enum lp55xx_engine_index idx = chip->engine_idx; + u8 mask[] = { + [LP55XX_ENGINE_1] = LP5521_MODE_R_M, + [LP55XX_ENGINE_2] = LP5521_MODE_G_M, + [LP55XX_ENGINE_3] = LP5521_MODE_B_M, + }; + + lp55xx_update_bits(chip, LP5521_REG_OP_MODE, mask[idx], 0); + + lp5521_wait_opmode_done(); +} + static void lp5521_run_engine(struct lp55xx_chip *chip, bool start) { int ret; @@ -244,18 +257,12 @@ static int lp5521_update_program_memory(struct lp55xx_chip *chip, if (i % 2) goto err; - mutex_lock(&chip->lock); - for (i = 0; i < LP5521_PROGRAM_LENGTH; i++) { ret = lp55xx_write(chip, addr[idx] + i, pattern[i]); - if (ret) { - mutex_unlock(&chip->lock); + if (ret) return -EINVAL; - } } - mutex_unlock(&chip->lock); - return size; err: @@ -427,15 +434,17 @@ static ssize_t store_engine_load(struct device *dev, { struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); struct lp55xx_chip *chip = led->chip; + int ret; mutex_lock(&chip->lock); chip->engine_idx = nr; lp5521_load_engine(chip); + ret = lp5521_update_program_memory(chip, buf, len); mutex_unlock(&chip->lock); - return lp5521_update_program_memory(chip, buf, len); + return ret; } store_load(1) store_load(2) @@ -568,7 +577,7 @@ static int lp5521_remove(struct i2c_client *client) struct lp55xx_led *led = i2c_get_clientdata(client); struct lp55xx_chip *chip = led->chip; - lp5521_stop_engine(chip); + lp5521_stop_all_engines(chip); lp55xx_unregister_sysfs(chip); lp55xx_unregister_leds(led, chip); lp55xx_deinit_device(chip); diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index 6b553d9f426..9e1716f8098 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -1,5 +1,5 @@ /* - * lp5523.c - LP5523 LED Driver + * lp5523.c - LP5523, LP55231 LED Driver * * Copyright (C) 2010 Nokia Corporation * Copyright (C) 2012 Texas Instruments @@ -25,7 +25,6 @@ #include <linux/delay.h> #include <linux/firmware.h> #include <linux/i2c.h> -#include <linux/init.h> #include <linux/leds.h> #include <linux/module.h> #include <linux/mutex.h> @@ -35,7 +34,15 @@ #include "leds-lp55xx-common.h" -#define LP5523_PROGRAM_LENGTH 32 +#define LP5523_PROGRAM_LENGTH 32 /* bytes */ +/* Memory is used like this: + 0x00 engine 1 program + 0x10 engine 2 program + 0x20 engine 3 program + 0x30 engine 1 muxing info + 0x40 engine 2 muxing info + 0x50 engine 3 muxing info +*/ #define LP5523_MAX_LEDS 9 /* Registers */ @@ -187,12 +194,26 @@ static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip) lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]); } -static void lp5523_stop_engine(struct lp55xx_chip *chip) +static void lp5523_stop_all_engines(struct lp55xx_chip *chip) { lp55xx_write(chip, LP5523_REG_OP_MODE, 0); lp5523_wait_opmode_done(); } +static void lp5523_stop_engine(struct lp55xx_chip *chip) +{ + enum lp55xx_engine_index idx = chip->engine_idx; + u8 mask[] = { + [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M, + [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M, + [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M, + }; + + lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], 0); + + lp5523_wait_opmode_done(); +} + static void lp5523_turn_off_channels(struct lp55xx_chip *chip) { int i; @@ -303,7 +324,7 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip) } out: - lp5523_stop_engine(chip); + lp5523_stop_all_engines(chip); return ret; } @@ -337,18 +358,12 @@ static int lp5523_update_program_memory(struct lp55xx_chip *chip, if (i % 2) goto err; - mutex_lock(&chip->lock); - for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) { ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]); - if (ret) { - mutex_unlock(&chip->lock); + if (ret) return -EINVAL; - } } - mutex_unlock(&chip->lock); - return size; err: @@ -548,15 +563,17 @@ static ssize_t store_engine_load(struct device *dev, { struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); struct lp55xx_chip *chip = led->chip; + int ret; mutex_lock(&chip->lock); chip->engine_idx = nr; lp5523_load_engine_and_select_page(chip); + ret = lp5523_update_program_memory(chip, buf, len); mutex_unlock(&chip->lock); - return lp5523_update_program_memory(chip, buf, len); + return ret; } store_load(1) store_load(2) @@ -778,7 +795,7 @@ static int lp5523_remove(struct i2c_client *client) struct lp55xx_led *led = i2c_get_clientdata(client); struct lp55xx_chip *chip = led->chip; - lp5523_stop_engine(chip); + lp5523_stop_all_engines(chip); lp55xx_unregister_sysfs(chip); lp55xx_unregister_leds(led, chip); lp55xx_deinit_device(chip); @@ -797,6 +814,7 @@ MODULE_DEVICE_TABLE(i2c, lp5523_id); #ifdef CONFIG_OF static const struct of_device_id of_lp5523_leds_match[] = { { .compatible = "national,lp5523", }, + { .compatible = "ti,lp55231", }, {}, }; diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c index bf006f4e44a..ca85724ab13 100644 --- a/drivers/leds/leds-lp5562.c +++ b/drivers/leds/leds-lp5562.c @@ -13,7 +13,6 @@ #include <linux/delay.h> #include <linux/firmware.h> #include <linux/i2c.h> -#include <linux/init.h> #include <linux/leds.h> #include <linux/module.h> #include <linux/mutex.h> @@ -347,9 +346,9 @@ static void lp5562_write_program_memory(struct lp55xx_chip *chip, /* check the size of program count */ static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn) { - return (ptn->size_r >= LP5562_PROGRAM_LENGTH || - ptn->size_g >= LP5562_PROGRAM_LENGTH || - ptn->size_b >= LP5562_PROGRAM_LENGTH); + return ptn->size_r >= LP5562_PROGRAM_LENGTH || + ptn->size_g >= LP5562_PROGRAM_LENGTH || + ptn->size_b >= LP5562_PROGRAM_LENGTH; } static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode) diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c index 9acc6bb7dee..88317b4f7bf 100644 --- a/drivers/leds/leds-lp55xx-common.c +++ b/drivers/leds/leds-lp55xx-common.c @@ -210,6 +210,7 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context) { struct lp55xx_chip *chip = context; struct device *dev = &chip->cl->dev; + enum lp55xx_engine_index idx = chip->engine_idx; if (!fw) { dev_err(dev, "firmware request failed\n"); @@ -219,6 +220,7 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context) /* handling firmware data is chip dependent */ mutex_lock(&chip->lock); + chip->engines[idx - 1].mode = LP55XX_ENGINE_LOAD; chip->fw = fw; if (chip->cfg->firmware_cb) chip->cfg->firmware_cb(chip); diff --git a/drivers/leds/leds-lp8501.c b/drivers/leds/leds-lp8501.c index f1c704f2243..00f068b0fa6 100644 --- a/drivers/leds/leds-lp8501.c +++ b/drivers/leds/leds-lp8501.c @@ -263,7 +263,7 @@ static void lp8501_firmware_loaded(struct lp55xx_chip *chip) } /* - * Program momery sequence + * Program memory sequence * 1) set engine mode to "LOAD" * 2) write firmware data into program memory */ diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c index 3417e5be7b5..059f5b1f355 100644 --- a/drivers/leds/leds-lt3593.c +++ b/drivers/leds/leds-lt3593.c @@ -17,7 +17,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/workqueue.h> diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c index fa9b439323b..f1db88e2513 100644 --- a/drivers/leds/leds-mc13783.c +++ b/drivers/leds/leds-mc13783.c @@ -1,5 +1,5 @@ /* - * LEDs driver for Freescale MC13783/MC13892 + * LEDs driver for Freescale MC13783/MC13892/MC34708 * * Copyright (C) 2010 Philippe Rétornaz * @@ -17,57 +17,56 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/of.h> #include <linux/workqueue.h> #include <linux/mfd/mc13xxx.h> -#define MC13XXX_REG_LED_CONTROL(x) (51 + (x)) - struct mc13xxx_led_devtype { int led_min; int led_max; int num_regs; + u32 ledctrl_base; }; struct mc13xxx_led { struct led_classdev cdev; struct work_struct work; - struct mc13xxx *master; enum led_brightness new_brightness; int id; + struct mc13xxx_leds *leds; }; struct mc13xxx_leds { + struct mc13xxx *master; struct mc13xxx_led_devtype *devtype; int num_leds; - struct mc13xxx_led led[0]; + struct mc13xxx_led *led; }; +static unsigned int mc13xxx_max_brightness(int id) +{ + if (id >= MC13783_LED_MD && id <= MC13783_LED_KP) + return 0x0f; + else if (id >= MC13783_LED_R1 && id <= MC13783_LED_B3) + return 0x1f; + + return 0x3f; +} + static void mc13xxx_led_work(struct work_struct *work) { struct mc13xxx_led *led = container_of(work, struct mc13xxx_led, work); - int reg, mask, value, bank, off, shift; + struct mc13xxx_leds *leds = led->leds; + unsigned int reg, bank, off, shift; switch (led->id) { case MC13783_LED_MD: - reg = MC13XXX_REG_LED_CONTROL(2); - shift = 9; - mask = 0x0f; - value = led->new_brightness >> 4; - break; case MC13783_LED_AD: - reg = MC13XXX_REG_LED_CONTROL(2); - shift = 13; - mask = 0x0f; - value = led->new_brightness >> 4; - break; case MC13783_LED_KP: - reg = MC13XXX_REG_LED_CONTROL(2); - shift = 17; - mask = 0x0f; - value = led->new_brightness >> 4; + reg = 2; + shift = 9 + (led->id - MC13783_LED_MD) * 4; break; case MC13783_LED_R1: case MC13783_LED_G1: @@ -80,46 +79,35 @@ static void mc13xxx_led_work(struct work_struct *work) case MC13783_LED_B3: off = led->id - MC13783_LED_R1; bank = off / 3; - reg = MC13XXX_REG_LED_CONTROL(3) + bank; + reg = 3 + bank; shift = (off - bank * 3) * 5 + 6; - value = led->new_brightness >> 3; - mask = 0x1f; break; case MC13892_LED_MD: - reg = MC13XXX_REG_LED_CONTROL(0); - shift = 3; - mask = 0x3f; - value = led->new_brightness >> 2; - break; case MC13892_LED_AD: - reg = MC13XXX_REG_LED_CONTROL(0); - shift = 15; - mask = 0x3f; - value = led->new_brightness >> 2; - break; case MC13892_LED_KP: - reg = MC13XXX_REG_LED_CONTROL(1); - shift = 3; - mask = 0x3f; - value = led->new_brightness >> 2; + reg = (led->id - MC13892_LED_MD) / 2; + shift = 3 + (led->id - MC13892_LED_MD) * 12; break; case MC13892_LED_R: case MC13892_LED_G: case MC13892_LED_B: off = led->id - MC13892_LED_R; bank = off / 2; - reg = MC13XXX_REG_LED_CONTROL(2) + bank; + reg = 2 + bank; shift = (off - bank * 2) * 12 + 3; - value = led->new_brightness >> 2; - mask = 0x3f; + break; + case MC34708_LED_R: + case MC34708_LED_G: + reg = 0; + shift = 3 + (led->id - MC34708_LED_R) * 12; break; default: BUG(); } - mc13xxx_lock(led->master); - mc13xxx_reg_rmw(led->master, reg, mask << shift, value << shift); - mc13xxx_unlock(led->master); + mc13xxx_reg_rmw(leds->master, leds->devtype->ledctrl_base + reg, + mc13xxx_max_brightness(led->id) << shift, + led->new_brightness << shift); } static void mc13xxx_led_set(struct led_classdev *led_cdev, @@ -132,163 +120,153 @@ static void mc13xxx_led_set(struct led_classdev *led_cdev, schedule_work(&led->work); } -static int __init mc13xxx_led_setup(struct mc13xxx_led *led, int max_current) +#ifdef CONFIG_OF +static struct mc13xxx_leds_platform_data __init *mc13xxx_led_probe_dt( + struct platform_device *pdev) { - int shift, mask, reg, ret, bank; + struct mc13xxx_leds *leds = platform_get_drvdata(pdev); + struct mc13xxx_leds_platform_data *pdata; + struct device_node *parent, *child; + struct device *dev = &pdev->dev; + int i = 0, ret = -ENODATA; - switch (led->id) { - case MC13783_LED_MD: - reg = MC13XXX_REG_LED_CONTROL(2); - shift = 0; - mask = 0x07; - break; - case MC13783_LED_AD: - reg = MC13XXX_REG_LED_CONTROL(2); - shift = 3; - mask = 0x07; - break; - case MC13783_LED_KP: - reg = MC13XXX_REG_LED_CONTROL(2); - shift = 6; - mask = 0x07; - break; - case MC13783_LED_R1: - case MC13783_LED_G1: - case MC13783_LED_B1: - case MC13783_LED_R2: - case MC13783_LED_G2: - case MC13783_LED_B2: - case MC13783_LED_R3: - case MC13783_LED_G3: - case MC13783_LED_B3: - bank = (led->id - MC13783_LED_R1) / 3; - reg = MC13XXX_REG_LED_CONTROL(3) + bank; - shift = ((led->id - MC13783_LED_R1) - bank * 3) * 2; - mask = 0x03; - break; - case MC13892_LED_MD: - reg = MC13XXX_REG_LED_CONTROL(0); - shift = 9; - mask = 0x07; - break; - case MC13892_LED_AD: - reg = MC13XXX_REG_LED_CONTROL(0); - shift = 21; - mask = 0x07; - break; - case MC13892_LED_KP: - reg = MC13XXX_REG_LED_CONTROL(1); - shift = 9; - mask = 0x07; - break; - case MC13892_LED_R: - case MC13892_LED_G: - case MC13892_LED_B: - bank = (led->id - MC13892_LED_R) / 2; - reg = MC13XXX_REG_LED_CONTROL(2) + bank; - shift = ((led->id - MC13892_LED_R) - bank * 2) * 12 + 9; - mask = 0x07; - break; - default: - BUG(); + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + of_node_get(dev->parent->of_node); + + parent = of_find_node_by_name(dev->parent->of_node, "leds"); + if (!parent) + goto out_node_put; + + ret = of_property_read_u32_array(parent, "led-control", + pdata->led_control, + leds->devtype->num_regs); + if (ret) + goto out_node_put; + + pdata->num_leds = of_get_child_count(parent); + + pdata->led = devm_kzalloc(dev, pdata->num_leds * sizeof(*pdata->led), + GFP_KERNEL); + if (!pdata->led) { + ret = -ENOMEM; + goto out_node_put; } - mc13xxx_lock(led->master); - ret = mc13xxx_reg_rmw(led->master, reg, mask << shift, - max_current << shift); - mc13xxx_unlock(led->master); + for_each_child_of_node(parent, child) { + const char *str; + u32 tmp; - return ret; + if (of_property_read_u32(child, "reg", &tmp)) + continue; + pdata->led[i].id = leds->devtype->led_min + tmp; + + if (!of_property_read_string(child, "label", &str)) + pdata->led[i].name = str; + if (!of_property_read_string(child, "linux,default-trigger", + &str)) + pdata->led[i].default_trigger = str; + + i++; + } + + pdata->num_leds = i; + ret = i > 0 ? 0 : -ENODATA; + +out_node_put: + of_node_put(parent); + + return ret ? ERR_PTR(ret) : pdata; } +#else +static inline struct mc13xxx_leds_platform_data __init *mc13xxx_led_probe_dt( + struct platform_device *pdev) +{ + return ERR_PTR(-ENOSYS); +} +#endif static int __init mc13xxx_led_probe(struct platform_device *pdev) { - struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(dev); + struct mc13xxx *mcdev = dev_get_drvdata(dev->parent); struct mc13xxx_led_devtype *devtype = (struct mc13xxx_led_devtype *)pdev->id_entry->driver_data; struct mc13xxx_leds *leds; - int i, id, num_leds, ret = -ENODATA; - u32 reg, init_led = 0; + int i, id, ret = -ENODATA; + u32 init_led = 0; - if (!pdata) { - dev_err(&pdev->dev, "Missing platform data\n"); - return -ENODEV; - } + leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL); + if (!leds) + return -ENOMEM; + + leds->devtype = devtype; + leds->master = mcdev; + platform_set_drvdata(pdev, leds); + + if (dev->parent->of_node) { + pdata = mc13xxx_led_probe_dt(pdev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } else if (!pdata) + return -ENODATA; - num_leds = pdata->num_leds; + leds->num_leds = pdata->num_leds; - if ((num_leds < 1) || - (num_leds > (devtype->led_max - devtype->led_min + 1))) { - dev_err(&pdev->dev, "Invalid LED count %d\n", num_leds); + if ((leds->num_leds < 1) || + (leds->num_leds > (devtype->led_max - devtype->led_min + 1))) { + dev_err(dev, "Invalid LED count %d\n", leds->num_leds); return -EINVAL; } - leds = devm_kzalloc(&pdev->dev, num_leds * sizeof(struct mc13xxx_led) + - sizeof(struct mc13xxx_leds), GFP_KERNEL); - if (!leds) + leds->led = devm_kzalloc(dev, leds->num_leds * sizeof(*leds->led), + GFP_KERNEL); + if (!leds->led) return -ENOMEM; - leds->devtype = devtype; - leds->num_leds = num_leds; - platform_set_drvdata(pdev, leds); - - mc13xxx_lock(mcdev); for (i = 0; i < devtype->num_regs; i++) { - reg = pdata->led_control[i]; - WARN_ON(reg >= (1 << 24)); - ret = mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), reg); + ret = mc13xxx_reg_write(mcdev, leds->devtype->ledctrl_base + i, + pdata->led_control[i]); if (ret) - break; + return ret; } - mc13xxx_unlock(mcdev); - if (ret) { - dev_err(&pdev->dev, "Unable to init LED driver\n"); - return ret; - } - - for (i = 0; i < num_leds; i++) { + for (i = 0; i < leds->num_leds; i++) { const char *name, *trig; - char max_current; ret = -EINVAL; id = pdata->led[i].id; name = pdata->led[i].name; trig = pdata->led[i].default_trigger; - max_current = pdata->led[i].max_current; if ((id > devtype->led_max) || (id < devtype->led_min)) { - dev_err(&pdev->dev, "Invalid ID %i\n", id); + dev_err(dev, "Invalid ID %i\n", id); break; } if (init_led & (1 << id)) { - dev_warn(&pdev->dev, - "LED %i already initialized\n", id); + dev_warn(dev, "LED %i already initialized\n", id); break; } init_led |= 1 << id; leds->led[i].id = id; - leds->led[i].master = mcdev; + leds->led[i].leds = leds; leds->led[i].cdev.name = name; leds->led[i].cdev.default_trigger = trig; + leds->led[i].cdev.flags = LED_CORE_SUSPENDRESUME; leds->led[i].cdev.brightness_set = mc13xxx_led_set; - leds->led[i].cdev.brightness = LED_OFF; + leds->led[i].cdev.max_brightness = mc13xxx_max_brightness(id); INIT_WORK(&leds->led[i].work, mc13xxx_led_work); - ret = mc13xxx_led_setup(&leds->led[i], max_current); + ret = led_classdev_register(dev->parent, &leds->led[i].cdev); if (ret) { - dev_err(&pdev->dev, "Unable to setup LED %i\n", id); - break; - } - ret = led_classdev_register(pdev->dev.parent, - &leds->led[i].cdev); - if (ret) { - dev_err(&pdev->dev, "Failed to register LED %i\n", id); + dev_err(dev, "Failed to register LED %i\n", id); break; } } @@ -304,7 +282,6 @@ static int __init mc13xxx_led_probe(struct platform_device *pdev) static int mc13xxx_led_remove(struct platform_device *pdev) { - struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent); struct mc13xxx_leds *leds = platform_get_drvdata(pdev); int i; @@ -313,11 +290,6 @@ static int mc13xxx_led_remove(struct platform_device *pdev) cancel_work_sync(&leds->led[i].work); } - mc13xxx_lock(mcdev); - for (i = 0; i < leds->devtype->num_regs; i++) - mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), 0); - mc13xxx_unlock(mcdev); - return 0; } @@ -325,17 +297,27 @@ static const struct mc13xxx_led_devtype mc13783_led_devtype = { .led_min = MC13783_LED_MD, .led_max = MC13783_LED_B3, .num_regs = 6, + .ledctrl_base = 51, }; static const struct mc13xxx_led_devtype mc13892_led_devtype = { .led_min = MC13892_LED_MD, .led_max = MC13892_LED_B, .num_regs = 4, + .ledctrl_base = 51, +}; + +static const struct mc13xxx_led_devtype mc34708_led_devtype = { + .led_min = MC34708_LED_R, + .led_max = MC34708_LED_G, + .num_regs = 1, + .ledctrl_base = 54, }; static const struct platform_device_id mc13xxx_led_id_table[] = { { "mc13783-led", (kernel_ulong_t)&mc13783_led_devtype, }, { "mc13892-led", (kernel_ulong_t)&mc13892_led_devtype, }, + { "mc34708-led", (kernel_ulong_t)&mc34708_led_devtype, }, { } }; MODULE_DEVICE_TABLE(platform, mc13xxx_led_id_table); diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c index 2f9f141084b..e97f443a6e0 100644 --- a/drivers/leds/leds-netxbig.c +++ b/drivers/leds/leds-netxbig.c @@ -21,7 +21,6 @@ */ #include <linux/module.h> -#include <linux/init.h> #include <linux/irq.h> #include <linux/slab.h> #include <linux/spinlock.h> diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c index c7a4230233e..efa625883c8 100644 --- a/drivers/leds/leds-ns2.c +++ b/drivers/leds/leds-ns2.c @@ -23,7 +23,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/gpio.h> diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c index 98cae529373..c9d90609846 100644 --- a/drivers/leds/leds-ot200.c +++ b/drivers/leds/leds-ot200.c @@ -8,7 +8,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/leds.h> diff --git a/drivers/leds/leds-pca9685.c b/drivers/leds/leds-pca9685.c deleted file mode 100644 index 6e1ef3a9d6e..00000000000 --- a/drivers/leds/leds-pca9685.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * Copyright 2013 Maximilian Güntner <maximilian.guentner@gmail.com> - * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. - * - * Based on leds-pca963x.c driver by - * Peter Meerwald <p.meerwald@bct-electronic.com> - * - * Driver for the NXP PCA9685 12-Bit PWM LED driver chip. - * - */ - -#include <linux/ctype.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/i2c.h> -#include <linux/leds.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/workqueue.h> - -#include <linux/platform_data/leds-pca9685.h> - -/* Register Addresses */ -#define PCA9685_MODE1 0x00 -#define PCA9685_MODE2 0x01 -#define PCA9685_LED0_ON_L 0x06 -#define PCA9685_ALL_LED_ON_L 0xFA - -/* MODE1 Register */ -#define PCA9685_ALLCALL 0x00 -#define PCA9685_SLEEP 0x04 -#define PCA9685_AI 0x05 - -/* MODE2 Register */ -#define PCA9685_INVRT 0x04 -#define PCA9685_OUTDRV 0x02 - -static const struct i2c_device_id pca9685_id[] = { - { "pca9685", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, pca9685_id); - -struct pca9685_led { - struct i2c_client *client; - struct work_struct work; - u16 brightness; - struct led_classdev led_cdev; - int led_num; /* 0-15 */ - char name[32]; -}; - -static void pca9685_write_msg(struct i2c_client *client, u8 *buf, u8 len) -{ - struct i2c_msg msg = { - .addr = client->addr, - .flags = 0x00, - .len = len, - .buf = buf - }; - i2c_transfer(client->adapter, &msg, 1); -} - -static void pca9685_all_off(struct i2c_client *client) -{ - u8 i2c_buffer[5] = {PCA9685_ALL_LED_ON_L, 0x00, 0x00, 0x00, 0x10}; - pca9685_write_msg(client, i2c_buffer, 5); -} - -static void pca9685_led_work(struct work_struct *work) -{ - struct pca9685_led *pca9685; - u8 i2c_buffer[5]; - - pca9685 = container_of(work, struct pca9685_led, work); - i2c_buffer[0] = PCA9685_LED0_ON_L + 4 * pca9685->led_num; - /* - * 4095 is the maximum brightness, so we set the ON time to 0x1000 - * which disables the PWM generator for that LED - */ - if (pca9685->brightness == 4095) - *((__le16 *)(i2c_buffer+1)) = cpu_to_le16(0x1000); - else - *((__le16 *)(i2c_buffer+1)) = 0x0000; - - if (pca9685->brightness == 0) - *((__le16 *)(i2c_buffer+3)) = cpu_to_le16(0x1000); - else if (pca9685->brightness == 4095) - *((__le16 *)(i2c_buffer+3)) = 0x0000; - else - *((__le16 *)(i2c_buffer+3)) = cpu_to_le16(pca9685->brightness); - - pca9685_write_msg(pca9685->client, i2c_buffer, 5); -} - -static void pca9685_led_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - struct pca9685_led *pca9685; - pca9685 = container_of(led_cdev, struct pca9685_led, led_cdev); - pca9685->brightness = value; - - schedule_work(&pca9685->work); -} - -static int pca9685_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct pca9685_led *pca9685; - struct pca9685_platform_data *pdata; - int err; - u8 i; - - pdata = dev_get_platdata(&client->dev); - if (pdata) { - if (pdata->leds.num_leds < 1 || pdata->leds.num_leds > 15) { - dev_err(&client->dev, "board info must claim 1-16 LEDs"); - return -EINVAL; - } - } - - pca9685 = devm_kzalloc(&client->dev, 16 * sizeof(*pca9685), GFP_KERNEL); - if (!pca9685) - return -ENOMEM; - - i2c_set_clientdata(client, pca9685); - pca9685_all_off(client); - - for (i = 0; i < 16; i++) { - pca9685[i].client = client; - pca9685[i].led_num = i; - pca9685[i].name[0] = '\0'; - if (pdata && i < pdata->leds.num_leds) { - if (pdata->leds.leds[i].name) - strncpy(pca9685[i].name, - pdata->leds.leds[i].name, - sizeof(pca9685[i].name)-1); - if (pdata->leds.leds[i].default_trigger) - pca9685[i].led_cdev.default_trigger = - pdata->leds.leds[i].default_trigger; - } - if (strlen(pca9685[i].name) == 0) { - /* - * Write adapter and address to the name as well. - * Otherwise multiple chips attached to one host would - * not work. - */ - snprintf(pca9685[i].name, sizeof(pca9685[i].name), - "pca9685:%d:x%.2x:%d", - client->adapter->nr, client->addr, i); - } - pca9685[i].led_cdev.name = pca9685[i].name; - pca9685[i].led_cdev.max_brightness = 0xfff; - pca9685[i].led_cdev.brightness_set = pca9685_led_set; - - INIT_WORK(&pca9685[i].work, pca9685_led_work); - err = led_classdev_register(&client->dev, &pca9685[i].led_cdev); - if (err < 0) - goto exit; - } - - if (pdata) - i2c_smbus_write_byte_data(client, PCA9685_MODE2, - pdata->outdrv << PCA9685_OUTDRV | - pdata->inverted << PCA9685_INVRT); - else - i2c_smbus_write_byte_data(client, PCA9685_MODE2, - PCA9685_TOTEM_POLE << PCA9685_OUTDRV); - /* Enable Auto-Increment, enable oscillator, ALLCALL/SUBADDR disabled */ - i2c_smbus_write_byte_data(client, PCA9685_MODE1, BIT(PCA9685_AI)); - - return 0; - -exit: - while (i--) { - led_classdev_unregister(&pca9685[i].led_cdev); - cancel_work_sync(&pca9685[i].work); - } - return err; -} - -static int pca9685_remove(struct i2c_client *client) -{ - struct pca9685_led *pca9685 = i2c_get_clientdata(client); - u8 i; - - for (i = 0; i < 16; i++) { - led_classdev_unregister(&pca9685[i].led_cdev); - cancel_work_sync(&pca9685[i].work); - } - pca9685_all_off(client); - return 0; -} - -static struct i2c_driver pca9685_driver = { - .driver = { - .name = "leds-pca9685", - .owner = THIS_MODULE, - }, - .probe = pca9685_probe, - .remove = pca9685_remove, - .id_table = pca9685_id, -}; - -module_i2c_driver(pca9685_driver); - -MODULE_AUTHOR("Maximilian Güntner <maximilian.guentner@gmail.com>"); -MODULE_DESCRIPTION("PCA9685 LED Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index b31d8e99c41..d672bb4480f 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/fb.h> @@ -66,9 +65,15 @@ static void led_pwm_set(struct led_classdev *led_cdev, struct led_pwm_data *led_dat = container_of(led_cdev, struct led_pwm_data, cdev); unsigned int max = led_dat->cdev.max_brightness; - unsigned int period = led_dat->period; + unsigned long long duty = led_dat->period; - led_dat->duty = brightness * period / max; + duty *= brightness; + do_div(duty, max); + + if (led_dat->active_low) + duty = led_dat->period - duty; + + led_dat->duty = duty; if (led_dat->can_sleep) schedule_work(&led_dat->work); @@ -82,57 +87,87 @@ static inline size_t sizeof_pwm_leds_priv(int num_leds) (sizeof(struct led_pwm_data) * num_leds); } -static int led_pwm_create_of(struct platform_device *pdev, - struct led_pwm_priv *priv) +static void led_pwm_cleanup(struct led_pwm_priv *priv) { - struct device_node *node = pdev->dev.of_node; - struct device_node *child; + while (priv->num_leds--) { + led_classdev_unregister(&priv->leds[priv->num_leds].cdev); + if (priv->leds[priv->num_leds].can_sleep) + cancel_work_sync(&priv->leds[priv->num_leds].work); + } +} + +static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv, + struct led_pwm *led, struct device_node *child) +{ + struct led_pwm_data *led_data = &priv->leds[priv->num_leds]; int ret; - for_each_child_of_node(node, child) { - struct led_pwm_data *led_dat = &priv->leds[priv->num_leds]; + led_data->active_low = led->active_low; + led_data->cdev.name = led->name; + led_data->cdev.default_trigger = led->default_trigger; + led_data->cdev.brightness_set = led_pwm_set; + led_data->cdev.brightness = LED_OFF; + led_data->cdev.max_brightness = led->max_brightness; + led_data->cdev.flags = LED_CORE_SUSPENDRESUME; - led_dat->cdev.name = of_get_property(child, "label", - NULL) ? : child->name; + if (child) + led_data->pwm = devm_of_pwm_get(dev, child, NULL); + else + led_data->pwm = devm_pwm_get(dev, led->name); + if (IS_ERR(led_data->pwm)) { + ret = PTR_ERR(led_data->pwm); + dev_err(dev, "unable to request PWM for %s: %d\n", + led->name, ret); + return ret; + } - led_dat->pwm = devm_of_pwm_get(&pdev->dev, child, NULL); - if (IS_ERR(led_dat->pwm)) { - dev_err(&pdev->dev, "unable to request PWM for %s\n", - led_dat->cdev.name); - ret = PTR_ERR(led_dat->pwm); - goto err; - } - /* Get the period from PWM core when n*/ - led_dat->period = pwm_get_period(led_dat->pwm); + if (child) + led_data->period = pwm_get_period(led_data->pwm); - led_dat->cdev.default_trigger = of_get_property(child, - "linux,default-trigger", NULL); - of_property_read_u32(child, "max-brightness", - &led_dat->cdev.max_brightness); + led_data->can_sleep = pwm_can_sleep(led_data->pwm); + if (led_data->can_sleep) + INIT_WORK(&led_data->work, led_pwm_work); + + led_data->period = pwm_get_period(led_data->pwm); + if (!led_data->period && (led->pwm_period_ns > 0)) + led_data->period = led->pwm_period_ns; + + ret = led_classdev_register(dev, &led_data->cdev); + if (ret == 0) { + priv->num_leds++; + } else { + dev_err(dev, "failed to register PWM led for %s: %d\n", + led->name, ret); + } + + return ret; +} + +static int led_pwm_create_of(struct device *dev, struct led_pwm_priv *priv) +{ + struct device_node *child; + struct led_pwm led; + int ret = 0; - led_dat->cdev.brightness_set = led_pwm_set; - led_dat->cdev.brightness = LED_OFF; - led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + memset(&led, 0, sizeof(led)); - led_dat->can_sleep = pwm_can_sleep(led_dat->pwm); - if (led_dat->can_sleep) - INIT_WORK(&led_dat->work, led_pwm_work); + for_each_child_of_node(dev->of_node, child) { + led.name = of_get_property(child, "label", NULL) ? : + child->name; - ret = led_classdev_register(&pdev->dev, &led_dat->cdev); - if (ret < 0) { - dev_err(&pdev->dev, "failed to register for %s\n", - led_dat->cdev.name); + led.default_trigger = of_get_property(child, + "linux,default-trigger", NULL); + led.active_low = of_property_read_bool(child, "active-low"); + of_property_read_u32(child, "max-brightness", + &led.max_brightness); + + ret = led_pwm_add(dev, priv, &led, child); + if (ret) { of_node_put(child); - goto err; + break; } - priv->num_leds++; } - return 0; -err: - while (priv->num_leds--) - led_classdev_unregister(&priv->leds[priv->num_leds].cdev); - return ret; } @@ -158,63 +193,30 @@ static int led_pwm_probe(struct platform_device *pdev) if (pdata) { for (i = 0; i < count; i++) { - struct led_pwm *cur_led = &pdata->leds[i]; - struct led_pwm_data *led_dat = &priv->leds[i]; - - led_dat->pwm = devm_pwm_get(&pdev->dev, cur_led->name); - if (IS_ERR(led_dat->pwm)) { - ret = PTR_ERR(led_dat->pwm); - dev_err(&pdev->dev, - "unable to request PWM for %s\n", - cur_led->name); - goto err; - } - - led_dat->cdev.name = cur_led->name; - led_dat->cdev.default_trigger = cur_led->default_trigger; - led_dat->active_low = cur_led->active_low; - led_dat->period = cur_led->pwm_period_ns; - led_dat->cdev.brightness_set = led_pwm_set; - led_dat->cdev.brightness = LED_OFF; - led_dat->cdev.max_brightness = cur_led->max_brightness; - led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; - - led_dat->can_sleep = pwm_can_sleep(led_dat->pwm); - if (led_dat->can_sleep) - INIT_WORK(&led_dat->work, led_pwm_work); - - ret = led_classdev_register(&pdev->dev, &led_dat->cdev); - if (ret < 0) - goto err; + ret = led_pwm_add(&pdev->dev, priv, &pdata->leds[i], + NULL); + if (ret) + break; } - priv->num_leds = count; } else { - ret = led_pwm_create_of(pdev, priv); - if (ret) - return ret; + ret = led_pwm_create_of(&pdev->dev, priv); + } + + if (ret) { + led_pwm_cleanup(priv); + return ret; } platform_set_drvdata(pdev, priv); return 0; - -err: - while (i--) - led_classdev_unregister(&priv->leds[i].cdev); - - return ret; } static int led_pwm_remove(struct platform_device *pdev) { struct led_pwm_priv *priv = platform_get_drvdata(pdev); - int i; - for (i = 0; i < priv->num_leds; i++) { - led_classdev_unregister(&priv->leds[i].cdev); - if (priv->leds[i].can_sleep) - cancel_work_sync(&priv->leds[i].work); - } + led_pwm_cleanup(priv); return 0; } diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c index 76483fb5ee4..785eb53a87f 100644 --- a/drivers/leds/leds-s3c24xx.c +++ b/drivers/leds/leds-s3c24xx.c @@ -12,16 +12,15 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/gpio.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/platform_data/leds-s3c24xx.h> -#include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <linux/platform_data/leds-s3c24xx.h> +#include <plat/gpio-cfg.h> /* our context */ @@ -77,10 +76,8 @@ static int s3c24xx_led_probe(struct platform_device *dev) led = devm_kzalloc(&dev->dev, sizeof(struct s3c24xx_gpio_led), GFP_KERNEL); - if (led == NULL) { - dev_err(&dev->dev, "No memory for device\n"); + if (!led) return -ENOMEM; - } platform_set_drvdata(dev, led); diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c index 5b8f938a8d7..2eb3ef62962 100644 --- a/drivers/leds/leds-ss4200.c +++ b/drivers/leds/leds-ss4200.c @@ -63,7 +63,7 @@ MODULE_LICENSE("GPL"); /* * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives. */ -static DEFINE_PCI_DEVICE_TABLE(ich7_lpc_pci_id) = { +static const struct pci_device_id ich7_lpc_pci_id[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) }, @@ -78,7 +78,7 @@ static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id) return 1; } -static bool __initdata nodetect; +static bool nodetect; module_param_named(nodetect, nodetect, bool, 0); MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection"); diff --git a/drivers/leds/leds-sunfire.c b/drivers/leds/leds-sunfire.c index 388632d23d4..0b8cc4a021a 100644 --- a/drivers/leds/leds-sunfire.c +++ b/drivers/leds/leds-sunfire.c @@ -135,10 +135,8 @@ static int sunfire_led_generic_probe(struct platform_device *pdev, } p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); - if (!p) { - dev_err(&pdev->dev, "Could not allocate struct sunfire_drvdata\n"); + if (!p) return -ENOMEM; - } for (i = 0; i < NUM_LEDS_PER_BOARD; i++) { struct led_classdev *lp = &p->leds[i].led_cdev; diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c index 8cc304f3672..3d9e267a56c 100644 --- a/drivers/leds/leds-tca6507.c +++ b/drivers/leds/leds-tca6507.c @@ -4,77 +4,87 @@ * The TCA6507 is a programmable LED controller that can drive 7 * separate lines either by holding them low, or by pulsing them * with modulated width. - * The modulation can be varied in a simple pattern to produce a blink or - * double-blink. + * The modulation can be varied in a simple pattern to produce a + * blink or double-blink. * - * This driver can configure each line either as a 'GPIO' which is out-only - * (no pull-up) or as an LED with variable brightness and hardware-assisted - * blinking. + * This driver can configure each line either as a 'GPIO' which is + * out-only (pull-up resistor required) or as an LED with variable + * brightness and hardware-assisted blinking. * - * Apart from OFF and ON there are three programmable brightness levels which - * can be programmed from 0 to 15 and indicate how many 500usec intervals in - * each 8msec that the led is 'on'. The levels are named MASTER, BANK0 and - * BANK1. + * Apart from OFF and ON there are three programmable brightness + * levels which can be programmed from 0 to 15 and indicate how many + * 500usec intervals in each 8msec that the led is 'on'. The levels + * are named MASTER, BANK0 and BANK1. * - * There are two different blink rates that can be programmed, each with - * separate time for rise, on, fall, off and second-off. Thus if 3 or more - * different non-trivial rates are required, software must be used for the extra - * rates. The two different blink rates must align with the two levels BANK0 and - * BANK1. - * This driver does not support double-blink so 'second-off' always matches - * 'off'. + * There are two different blink rates that can be programmed, each + * with separate time for rise, on, fall, off and second-off. Thus if + * 3 or more different non-trivial rates are required, software must + * be used for the extra rates. The two different blink rates must + * align with the two levels BANK0 and BANK1. This driver does not + * support double-blink so 'second-off' always matches 'off'. * - * Only 16 different times can be programmed in a roughly logarithmic scale from - * 64ms to 16320ms. To be precise the possible times are: + * Only 16 different times can be programmed in a roughly logarithmic + * scale from 64ms to 16320ms. To be precise the possible times are: * 0, 64, 128, 192, 256, 384, 512, 768, * 1024, 1536, 2048, 3072, 4096, 5760, 8128, 16320 * - * Times that cannot be closely matched with these must be - * handled in software. This driver allows 12.5% error in matching. + * Times that cannot be closely matched with these must be handled in + * software. This driver allows 12.5% error in matching. * - * This driver does not allow rise/fall rates to be set explicitly. When trying - * to match a given 'on' or 'off' period, an appropriate pair of 'change' and - * 'hold' times are chosen to get a close match. If the target delay is even, - * the 'change' number will be the smaller; if odd, the 'hold' number will be - * the smaller. - - * Choosing pairs of delays with 12.5% errors allows us to match delays in the - * ranges: 56-72, 112-144, 168-216, 224-27504, 28560-36720. - * 26% of the achievable sums can be matched by multiple pairings. For example - * 1536 == 1536+0, 1024+512, or 768+768. This driver will always choose the - * pairing with the least maximum - 768+768 in this case. Other pairings are - * not available. + * This driver does not allow rise/fall rates to be set explicitly. + * When trying to match a given 'on' or 'off' period, an appropriate + * pair of 'change' and 'hold' times are chosen to get a close match. + * If the target delay is even, the 'change' number will be the + * smaller; if odd, the 'hold' number will be the smaller. + + * Choosing pairs of delays with 12.5% errors allows us to match + * delays in the ranges: 56-72, 112-144, 168-216, 224-27504, + * 28560-36720. + * 26% of the achievable sums can be matched by multiple pairings. + * For example 1536 == 1536+0, 1024+512, or 768+768. + * This driver will always choose the pairing with the least + * maximum - 768+768 in this case. Other pairings are not available. * - * Access to the 3 levels and 2 blinks are on a first-come, first-served basis. - * Access can be shared by multiple leds if they have the same level and - * either same blink rates, or some don't blink. - * When a led changes, it relinquishes access and tries again, so it might - * lose access to hardware blink. - * If a blink engine cannot be allocated, software blink is used. - * If the desired brightness cannot be allocated, the closest available non-zero - * brightness is used. As 'full' is always available, the worst case would be - * to have two different blink rates at '1', with Max at '2', then other leds - * will have to choose between '2' and '16'. Hopefully this is not likely. + * Access to the 3 levels and 2 blinks are on a first-come, + * first-served basis. Access can be shared by multiple leds if they + * have the same level and either same blink rates, or some don't + * blink. When a led changes, it relinquishes access and tries again, + * so it might lose access to hardware blink. * - * Each bank (BANK0 and BANK1) has two usage counts - LEDs using the brightness - * and LEDs using the blink. It can only be reprogrammed when the appropriate - * counter is zero. The MASTER level has a single usage count. + * If a blink engine cannot be allocated, software blink is used. If + * the desired brightness cannot be allocated, the closest available + * non-zero brightness is used. As 'full' is always available, the + * worst case would be to have two different blink rates at '1', with + * Max at '2', then other leds will have to choose between '2' and + * '16'. Hopefully this is not likely. * - * Each Led has programmable 'on' and 'off' time as milliseconds. With each - * there is a flag saying if it was explicitly requested or defaulted. - * Similarly the banks know if each time was explicit or a default. Defaults - * are permitted to be changed freely - they are not recognised when matching. + * Each bank (BANK0 and BANK1) has two usage counts - LEDs using the + * brightness and LEDs using the blink. It can only be reprogrammed + * when the appropriate counter is zero. The MASTER level has a + * single usage count. * + * Each LED has programmable 'on' and 'off' time as milliseconds. + * With each there is a flag saying if it was explicitly requested or + * defaulted. Similarly the banks know if each time was explicit or a + * default. Defaults are permitted to be changed freely - they are + * not recognised when matching. * - * An led-tca6507 device must be provided with platform data. This data - * lists for each output: the name, default trigger, and whether the signal - * is being used as a GPiO rather than an led. 'struct led_plaform_data' - * is used for this. If 'name' is NULL, the output isn't used. If 'flags' - * is TCA6507_MAKE_CPIO, the output is a GPO. - * The "struct led_platform_data" can be embedded in a - * "struct tca6507_platform_data" which adds a 'gpio_base' for the GPiOs, - * and a 'setup' callback which is called once the GPiOs are available. * + * An led-tca6507 device must be provided with platform data or + * configured via devicetree. + * + * The platform-data lists for each output: the name, default trigger, + * and whether the signal is being used as a GPIO rather than an LED. + * 'struct led_plaform_data' is used for this. If 'name' is NULL, the + * output isn't used. If 'flags' is TCA6507_MAKE_GPIO, the output is + * a GPO. The "struct led_platform_data" can be embedded in a "struct + * tca6507_platform_data" which adds a 'gpio_base' for the GPIOs, and + * a 'setup' callback which is called once the GPIOs are available. + * + * When configured via devicetree there is one child for each output. + * The "reg" determines the output number and "compatible" determines + * whether it is an LED or a GPIO. "linux,default-trigger" can set a + * default trigger. */ #include <linux/module.h> @@ -192,17 +202,18 @@ MODULE_DEVICE_TABLE(i2c, tca6507_id); static int choose_times(int msec, int *c1p, int *c2p) { /* - * Choose two timecodes which add to 'msec' as near as possible. - * The first returned is the 'on' or 'off' time. The second is to be - * used as a 'fade-on' or 'fade-off' time. If 'msec' is even, - * the first will not be smaller than the second. If 'msec' is odd, - * the first will not be larger than the second. - * If we cannot get a sum within 1/8 of 'msec' fail with -EINVAL, - * otherwise return the sum that was achieved, plus 1 if the first is - * smaller. - * If two possibilities are equally good (e.g. 512+0, 256+256), choose - * the first pair so there is more change-time visible (i.e. it is - * softer). + * Choose two timecodes which add to 'msec' as near as + * possible. The first returned is the 'on' or 'off' time. + * The second is to be used as a 'fade-on' or 'fade-off' time. + * If 'msec' is even, the first will not be smaller than the + * second. If 'msec' is odd, the first will not be larger + * than the second. + * If we cannot get a sum within 1/8 of 'msec' fail with + * -EINVAL, otherwise return the sum that was achieved, plus 1 + * if the first is smaller. + * If two possibilities are equally good (e.g. 512+0, + * 256+256), choose the first pair so there is more + * change-time visible (i.e. it is softer). */ int c1, c2; int tmax = msec * 9 / 8; @@ -255,8 +266,8 @@ static int choose_times(int msec, int *c1p, int *c2p) } /* - * Update the register file with the appropriate 3-bit state for - * the given led. + * Update the register file with the appropriate 3-bit state for the + * given led. */ static void set_select(struct tca6507_chip *tca, int led, int val) { @@ -274,9 +285,9 @@ static void set_select(struct tca6507_chip *tca, int led, int val) } } -/* Update the register file with the appropriate 4-bit code for - * one bank or other. This can be used for timers, for levels, or - * for initialisation. +/* Update the register file with the appropriate 4-bit code for one + * bank or other. This can be used for timers, for levels, or for + * initialization. */ static void set_code(struct tca6507_chip *tca, int reg, int bank, int new) { @@ -309,7 +320,7 @@ static void set_level(struct tca6507_chip *tca, int bank, int level) tca->bank[bank].level = level; } -/* Record all relevant time code for a given bank */ +/* Record all relevant time codes for a given bank */ static void set_times(struct tca6507_chip *tca, int bank) { int c1, c2; @@ -317,7 +328,8 @@ static void set_times(struct tca6507_chip *tca, int bank) result = choose_times(tca->bank[bank].ontime, &c1, &c2); dev_dbg(&tca->client->dev, - "Chose on times %d(%d) %d(%d) for %dms\n", c1, time_codes[c1], + "Chose on times %d(%d) %d(%d) for %dms\n", + c1, time_codes[c1], c2, time_codes[c2], tca->bank[bank].ontime); set_code(tca, TCA6507_FADE_ON, bank, c2); set_code(tca, TCA6507_FULL_ON, bank, c1); @@ -325,7 +337,8 @@ static void set_times(struct tca6507_chip *tca, int bank) result = choose_times(tca->bank[bank].offtime, &c1, &c2); dev_dbg(&tca->client->dev, - "Chose off times %d(%d) %d(%d) for %dms\n", c1, time_codes[c1], + "Chose off times %d(%d) %d(%d) for %dms\n", + c1, time_codes[c1], c2, time_codes[c2], tca->bank[bank].offtime); set_code(tca, TCA6507_FADE_OFF, bank, c2); set_code(tca, TCA6507_FIRST_OFF, bank, c1); @@ -373,7 +386,8 @@ static void led_release(struct tca6507_led *led) static int led_prepare(struct tca6507_led *led) { - /* Assign this led to a bank, configuring that bank if necessary. */ + /* Assign this led to a bank, configuring that bank if + * necessary. */ int level = TO_LEVEL(led->led_cdev.brightness); struct tca6507_chip *tca = led->chip; int c1, c2; @@ -389,10 +403,10 @@ static int led_prepare(struct tca6507_led *led) if (led->ontime == 0 || led->offtime == 0) { /* - * Just set the brightness, choosing first usable bank. - * If none perfect, choose best. - * Count backwards so we check MASTER bank first - * to avoid wasting a timer. + * Just set the brightness, choosing first usable + * bank. If none perfect, choose best. Count + * backwards so we check MASTER bank first to avoid + * wasting a timer. */ int best = -1;/* full-on */ int diff = 15-level; @@ -433,9 +447,9 @@ static int led_prepare(struct tca6507_led *led) } /* - * We have on/off time so we need to try to allocate a timing bank. - * First check if times are compatible with hardware and give up if - * not. + * We have on/off time so we need to try to allocate a timing + * bank. First check if times are compatible with hardware + * and give up if not. */ if (choose_times(led->ontime, &c1, &c2) < 0) return -EINVAL; @@ -523,8 +537,8 @@ static int led_assign(struct tca6507_led *led) err = led_prepare(led); if (err) { /* - * Can only fail on timer setup. In that case we need to - * re-establish as steady level. + * Can only fail on timer setup. In that case we need + * to re-establish as steady level. */ led->ontime = 0; led->offtime = 0; @@ -594,8 +608,8 @@ static void tca6507_gpio_set_value(struct gpio_chip *gc, spin_lock_irqsave(&tca->lock, flags); /* - * 'OFF' is floating high, and 'ON' is pulled down, so it has the - * inverse sense of 'val'. + * 'OFF' is floating high, and 'ON' is pulled down, so it has + * the inverse sense of 'val'. */ set_select(tca, tca->gpio_map[offset], val ? TCA6507_LS_LED_OFF : TCA6507_LS_LED_ON); @@ -638,6 +652,9 @@ static int tca6507_probe_gpios(struct i2c_client *client, tca->gpio.direction_output = tca6507_gpio_direction_output; tca->gpio.set = tca6507_gpio_set_value; tca->gpio.dev = &client->dev; +#ifdef CONFIG_OF_GPIO + tca->gpio.of_node = of_node_get(client->dev.of_node); +#endif err = gpiochip_add(&tca->gpio); if (err) { tca->gpio.ngpio = 0; @@ -682,7 +699,7 @@ tca6507_led_dt_init(struct i2c_client *client) return ERR_PTR(-ENODEV); tca_leds = devm_kzalloc(&client->dev, - sizeof(struct led_info) * count, GFP_KERNEL); + sizeof(struct led_info) * NUM_LEDS, GFP_KERNEL); if (!tca_leds) return ERR_PTR(-ENOMEM); @@ -695,9 +712,11 @@ tca6507_led_dt_init(struct i2c_client *client) of_get_property(child, "label", NULL) ? : child->name; led.default_trigger = of_get_property(child, "linux,default-trigger", NULL); - + led.flags = 0; + if (of_property_match_string(child, "compatible", "gpio") >= 0) + led.flags |= TCA6507_MAKE_GPIO; ret = of_property_read_u32(child, "reg", ®); - if (ret != 0) + if (ret != 0 || reg < 0 || reg >= NUM_LEDS) continue; tca_leds[reg] = led; @@ -708,8 +727,10 @@ tca6507_led_dt_init(struct i2c_client *client) return ERR_PTR(-ENOMEM); pdata->leds.leds = tca_leds; - pdata->leds.num_leds = count; - + pdata->leds.num_leds = NUM_LEDS; +#ifdef CONFIG_GPIOLIB + pdata->gpio_base = -1; +#endif return pdata; } diff --git a/drivers/leds/leds-versatile.c b/drivers/leds/leds-versatile.c new file mode 100644 index 00000000000..80553022d66 --- /dev/null +++ b/drivers/leds/leds-versatile.c @@ -0,0 +1,110 @@ +/* + * Driver for the 8 user LEDs found on the RealViews and Versatiles + * Based on DaVinci's DM365 board code + * + * License terms: GNU General Public License (GPL) version 2 + * Author: Linus Walleij <triad@df.lth.se> + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/leds.h> +#include <linux/platform_device.h> + +struct versatile_led { + void __iomem *base; + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} versatile_leds[] = { + { "versatile:0", "heartbeat", }, + { "versatile:1", "mmc0", }, + { "versatile:2", "cpu0" }, + { "versatile:3", "cpu1" }, + { "versatile:4", "cpu2" }, + { "versatile:5", "cpu3" }, + { "versatile:6", }, + { "versatile:7", }, +}; + +static void versatile_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + struct versatile_led *led = container_of(cdev, + struct versatile_led, cdev); + u32 reg = readl(led->base); + + if (b != LED_OFF) + reg |= led->mask; + else + reg &= ~led->mask; + writel(reg, led->base); +} + +static enum led_brightness versatile_led_get(struct led_classdev *cdev) +{ + struct versatile_led *led = container_of(cdev, + struct versatile_led, cdev); + u32 reg = readl(led->base); + + return (reg & led->mask) ? LED_FULL : LED_OFF; +} + +static int versatile_leds_probe(struct platform_device *dev) +{ + int i; + struct resource *res; + void __iomem *base; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + /* All off */ + writel(0, base); + for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) { + struct versatile_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->base = base; + led->cdev.name = versatile_leds[i].name; + led->cdev.brightness_set = versatile_led_set; + led->cdev.brightness_get = versatile_led_get; + led->cdev.default_trigger = versatile_leds[i].trigger; + led->mask = BIT(i); + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} + +static struct platform_driver versatile_leds_driver = { + .driver = { + .name = "versatile-leds", + }, + .probe = versatile_leds_probe, +}; + +module_platform_driver(versatile_leds_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("ARM Versatile LED driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c index 0a1a13f3a6a..e72c974142d 100644 --- a/drivers/leds/leds-wm831x-status.c +++ b/drivers/leds/leds-wm831x-status.c @@ -10,7 +10,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/leds.h> diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c index 3f75fd22fd4..4133ffe2901 100644 --- a/drivers/leds/leds-wm8350.c +++ b/drivers/leds/leds-wm8350.c @@ -10,7 +10,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/err.h> diff --git a/drivers/leds/trigger/ledtrig-cpu.c b/drivers/leds/trigger/ledtrig-cpu.c index 118335eccc5..aec0f02b6b3 100644 --- a/drivers/leds/trigger/ledtrig-cpu.c +++ b/drivers/leds/trigger/ledtrig-cpu.c @@ -26,6 +26,7 @@ #include <linux/percpu.h> #include <linux/syscore_ops.h> #include <linux/rwsem.h> +#include <linux/cpu.h> #include "../leds.h" #define MAX_NAME_LEN 8 @@ -46,7 +47,7 @@ static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig); */ void ledtrig_cpu(enum cpu_led_event ledevt) { - struct led_trigger_cpu *trig = &__get_cpu_var(cpu_trig); + struct led_trigger_cpu *trig = this_cpu_ptr(&cpu_trig); /* Locate the correct CPU LED */ switch (ledevt) { @@ -92,6 +93,26 @@ static struct syscore_ops ledtrig_cpu_syscore_ops = { .resume = ledtrig_cpu_syscore_resume, }; +static int ledtrig_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_STARTING: + ledtrig_cpu(CPU_LED_START); + break; + case CPU_DYING: + ledtrig_cpu(CPU_LED_STOP); + break; + } + + return NOTIFY_OK; +} + + +static struct notifier_block ledtrig_cpu_nb = { + .notifier_call = ledtrig_cpu_notify, +}; + static int __init ledtrig_cpu_init(void) { int cpu; @@ -113,6 +134,7 @@ static int __init ledtrig_cpu_init(void) } register_syscore_ops(&ledtrig_cpu_syscore_ops); + register_cpu_notifier(&ledtrig_cpu_nb); pr_info("ledtrig-cpu: registered to indicate activity on CPUs\n"); @@ -124,6 +146,8 @@ static void __exit ledtrig_cpu_exit(void) { int cpu; + unregister_cpu_notifier(&ledtrig_cpu_nb); + for_each_possible_cpu(cpu) { struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu); |