diff options
Diffstat (limited to 'drivers/leds/Kconfig')
| -rw-r--r-- | drivers/leds/Kconfig | 194 |
1 files changed, 92 insertions, 102 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 12b2b55c519..a1b044e7eaa 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -63,6 +63,17 @@ config LEDS_LM3533 hardware-accelerated blinking with maximum on and off periods of 9.8 and 77 seconds respectively. +config LEDS_LM3642 + tristate "LED support for LM3642 Chip" + depends on LEDS_CLASS && I2C + select REGMAP_I2C + help + This option enables support for LEDs connected to LM3642. + The LM3642 is a 4MHz fixed-frequency synchronous boost + converter plus 1.5A constant current driver for a high-current + white LED. + + config LEDS_LOCOMO tristate "LED Support for Locomo device" depends on LEDS_CLASS @@ -143,7 +154,7 @@ config LEDS_HP6XX config LEDS_PCA9532 tristate "LED driver for PCA9532 dimmer" depends on LEDS_CLASS - depends on I2C && INPUT && EXPERIMENTAL + depends on I2C && INPUT help This option enables support for NXP pca9532 LED controller. It is generally only useful @@ -162,7 +173,7 @@ config LEDS_PCA9532_GPIO config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS - depends on GENERIC_GPIO + depends on GPIOLIB help This option enables support for the LEDs connected to GPIO outputs. To be useful the particular board must have LEDs @@ -182,9 +193,18 @@ config LEDS_LP3944 To compile this driver as a module, choose M here: the module will be called leds-lp3944. +config LEDS_LP55XX_COMMON + tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" + depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501 + select FW_LOADER + help + This option supports common operations for LP5521/5523/55231/5562/8501 + devices. + config LEDS_LP5521 tristate "LED Support for N.S. LP5521 LED driver chip" depends on LEDS_CLASS && I2C + select LEDS_LP55XX_COMMON help If you say yes here you get support for the National Semiconductor LP5521 LED driver. It is 3 channel chip with programmable engines. @@ -192,14 +212,45 @@ config LEDS_LP5521 programming the engines. config LEDS_LP5523 - tristate "LED Support for N.S. LP5523 LED driver chip" + tristate "LED Support for TI/National LP5523/55231 LED driver chip" depends on LEDS_CLASS && I2C + select LEDS_LP55XX_COMMON help - If you say yes here you get support for the National Semiconductor - LP5523 LED driver. It is 9 channel chip with programmable engines. + If you say yes here you get support for TI/National Semiconductor + LP5523/55231 LED driver. + It is 9 channel chip with programmable engines. + Driver provides direct control via LED class and interface for + programming the engines. + +config LEDS_LP5562 + tristate "LED Support for TI LP5562 LED driver chip" + depends on LEDS_CLASS && I2C + select LEDS_LP55XX_COMMON + help + If you say yes here you get support for TI LP5562 LED driver. + It is 4 channels chip with programmable engines. Driver provides direct control via LED class and interface for programming the engines. +config LEDS_LP8501 + tristate "LED Support for TI LP8501 LED driver chip" + depends on LEDS_CLASS && I2C + select LEDS_LP55XX_COMMON + help + If you say yes here you get support for TI LP8501 LED driver. + It is 9 channel chip with programmable engines. + Driver provides direct control via LED class and interface for + programming the engines. + It is similar as LP5523, but output power selection is available. + And register layout and engine program schemes are different. + +config LEDS_LP8788 + tristate "LED support for the TI LP8788 PMIC" + depends on LEDS_CLASS + depends on MFD_LP8788 + help + This option enables support for the Keyboard LEDs on the LP8788 PMIC. + config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook" depends on LEDS_CLASS @@ -240,13 +291,14 @@ config LEDS_PCA955X LED driver chips accessed via the I2C bus. Supported devices include PCA9550, PCA9551, PCA9552, and PCA9553. -config LEDS_PCA9633 - tristate "LED support for PCA9633 I2C chip" +config LEDS_PCA963X + tristate "LED support for PCA963x I2C chip" depends on LEDS_CLASS depends on I2C help - This option enables support for LEDs connected to the PCA9633 - LED driver chip accessed via the I2C bus. + This option enables support for LEDs connected to the PCA963x + LED driver chip accessed via the I2C bus. Supported + devices include PCA9633 and PCA9634 config LEDS_WM831X_STATUS tristate "LED support for status LEDs on WM831x PMICs" @@ -291,7 +343,7 @@ config LEDS_DAC124S085 config LEDS_PWM tristate "PWM driven LED Support" depends on LEDS_CLASS - depends on HAVE_PWM + depends on PWM help This option enables support for pwm driven LEDs @@ -323,7 +375,7 @@ config LEDS_INTEL_SS4200 config LEDS_LT3593 tristate "LED driver for LT3593 controllers" depends on LEDS_CLASS - depends on GENERIC_GPIO + depends on GPIOLIB help This option enables support for LEDs driven by a Linear Technology LT3593 controller. This controller uses a special one-wire pulse @@ -349,18 +401,17 @@ config LEDS_DELL_NETBOOKS notebooks that have an external LED. config LEDS_MC13783 - tristate "LED Support for MC13783 PMIC" + tristate "LED Support for MC13XXX PMIC" depends on LEDS_CLASS - depends on MFD_MC13783 + depends on MFD_MC13XXX help This option enable support for on-chip LED drivers found - on Freescale Semiconductor MC13783 PMIC. + on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC. config LEDS_NS2 tristate "LED support for Network Space v2 GPIO LEDs" depends on LEDS_CLASS - depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \ - MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 + depends on ARCH_KIRKWOOD || MACH_KIRKWOOD default y help This option enable support for the dual-GPIO LED found on the @@ -369,8 +420,8 @@ config LEDS_NS2 config LEDS_NETXBIG tristate "LED support for Big Network series LEDs" - depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2 depends on LEDS_CLASS + depends on ARCH_KIRKWOOD || MACH_KIRKWOOD default y help This option enable support for LEDs found on the LaCie 2Big @@ -388,18 +439,6 @@ config LEDS_ASIC3 cannot be used. This driver supports hardware blinking with an on+off period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700. -config LEDS_RENESAS_TPU - bool "LED support for Renesas TPU" - depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO - help - This option enables build of the LED TPU platform driver, - suitable to drive any TPU channel on newer Renesas SoCs. - The driver controls the GPIO pin connected to the LED via - the GPIO framework and expects the LED to be connected to - a pin that can be driven in both GPIO mode and using TPU - pin function. The latter to support brightness control. - Brightness control is supported but hardware blinking is not. - config LEDS_TCA6507 tristate "LED Support for TCA6507 I2C chip" depends on LEDS_CLASS && I2C @@ -415,89 +454,40 @@ config LEDS_MAX8997 This option enables support for on-chip LED drivers on MAXIM MAX8997 PMIC. +config LEDS_LM355x + tristate "LED support for LM355x Chips, LM3554 and LM3556" + depends on LEDS_CLASS && I2C + select REGMAP_I2C + help + This option enables support for LEDs connected to LM355x. + LM355x includes Torch, Flash and Indicator functions. + config LEDS_OT200 tristate "LED support for the Bachmann OT200" - depends on LEDS_CLASS && HAS_IOMEM + depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST) help This option enables support for the LEDs on the Bachmann OT200. Say Y to enable LEDs on the Bachmann OT200. -config LEDS_TRIGGERS - bool "LED Trigger support" - depends on LEDS_CLASS - help - This option enables trigger support for the leds class. - These triggers allow kernel events to drive the LEDs and can - be configured via sysfs. If unsure, say Y. - -comment "LED Triggers" - -config LEDS_TRIGGER_TIMER - tristate "LED Timer Trigger" - depends on LEDS_TRIGGERS - help - This allows LEDs to be controlled by a programmable timer - via sysfs. Some LED hardware can be programmed to start - blinking the LED without any further software interaction. - For more details read Documentation/leds/leds-class.txt. - - If unsure, say Y. - -config LEDS_TRIGGER_IDE_DISK - bool "LED IDE Disk Trigger" - depends on IDE_GD_ATA - depends on LEDS_TRIGGERS - help - This allows LEDs to be controlled by IDE disk activity. - If unsure, say Y. - -config LEDS_TRIGGER_HEARTBEAT - tristate "LED Heartbeat Trigger" - depends on LEDS_TRIGGERS - help - This allows LEDs to be controlled by a CPU load average. - The flash frequency is a hyperbolic function of the 1-minute - load average. - If unsure, say Y. - -config LEDS_TRIGGER_BACKLIGHT - tristate "LED backlight Trigger" - depends on LEDS_TRIGGERS - help - This allows LEDs to be controlled as a backlight device: they - turn off and on when the display is blanked and unblanked. +comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" - If unsure, say N. - -config LEDS_TRIGGER_GPIO - tristate "LED GPIO Trigger" - depends on LEDS_TRIGGERS - depends on GPIOLIB +config LEDS_BLINKM + tristate "LED support for the BlinkM I2C RGB LED" + depends on LEDS_CLASS + depends on I2C help - This allows LEDs to be controlled by gpio events. It's good - when using gpios as switches and triggering the needed LEDs - from there. One use case is n810's keypad LEDs that could - be triggered by this trigger when user slides up to show - keypad. - - If unsure, say N. + This option enables support for the BlinkM RGB LED connected + through I2C. Say Y to enable support for the BlinkM LED. -config LEDS_TRIGGER_DEFAULT_ON - tristate "LED Default ON Trigger" - depends on LEDS_TRIGGERS +config LEDS_VERSATILE + tristate "LED support for the ARM Versatile and RealView" + depends on ARCH_REALVIEW || ARCH_VERSATILE + depends on LEDS_CLASS help - This allows LEDs to be initialised in the ON state. - If unsure, say Y. + This option enabled support for the LEDs on the ARM Versatile + and RealView boards. Say Y to enabled these. -comment "iptables trigger is under Netfilter config (LED target)" - depends on LEDS_TRIGGERS - -config LEDS_TRIGGER_TRANSIENT - tristate "LED Transient Trigger" - depends on LEDS_TRIGGERS - help - This allows one time activation of a transient state on - GPIO/PWM based hadrware. - If unsure, say Y. +comment "LED Triggers" +source "drivers/leds/trigger/Kconfig" endif # NEW_LEDS |