diff options
Diffstat (limited to 'drivers/isdn/hardware/mISDN/hfc_multi.h')
| -rw-r--r-- | drivers/isdn/hardware/mISDN/hfc_multi.h | 60 |
1 files changed, 31 insertions, 29 deletions
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h index 0c773866efc..c601f880141 100644 --- a/drivers/isdn/hardware/mISDN/hfc_multi.h +++ b/drivers/isdn/hardware/mISDN/hfc_multi.h @@ -33,13 +33,13 @@ */ /* -#define MAX_FRAME_SIZE 2048 + #define MAX_FRAME_SIZE 2048 */ struct hfc_chan { struct dchannel *dch; /* link if channel is a D-channel */ struct bchannel *bch; /* link if channel is a B-channel */ - int port; /* the interface port this */ + int port; /* the interface port this */ /* channel is associated with */ int nt_timer; /* -1 if off, 0 if elapsed, >0 if running */ int los, ais, slip_tx, slip_rx, rdi; /* current alarms */ @@ -89,7 +89,7 @@ struct hfcm_hw { #define HFC_CFG_REPORT_RDI 8 /* the card should report remote alarm */ #define HFC_CFG_DTMF 9 /* enable DTMF-detection */ #define HFC_CFG_CRC4 10 /* disable CRC-4 Multiframe mode, */ - /* use double frame instead. */ +/* use double frame instead. */ #define HFC_TYPE_E1 1 /* controller is HFC-E1 */ #define HFC_TYPE_4S 4 /* controller is HFC-4S */ @@ -109,9 +109,9 @@ struct hfcm_hw { #define HFC_CHIP_E1CLOCK_GET 10 /* always get clock from E1 interface */ #define HFC_CHIP_E1CLOCK_PUT 11 /* always put clock from E1 interface */ #define HFC_CHIP_WATCHDOG 12 /* whether we should send signals */ - /* to the watchdog */ +/* to the watchdog */ #define HFC_CHIP_B410P 13 /* whether we have a b410p with echocan in */ - /* hw */ +/* hw */ #define HFC_CHIP_PLXSD 14 /* whether we have a Speech-Design PLX */ #define HFC_CHIP_EMBSD 15 /* whether we have a SD Embedded board */ @@ -148,26 +148,26 @@ struct hfc_multi { int io_mode; /* selects mode */ #ifdef HFC_REGISTER_DEBUG void (*HFC_outb)(struct hfc_multi *hc, u_char reg, - u_char val, const char *function, int line); + u_char val, const char *function, int line); void (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg, - u_char val, const char *function, int line); + u_char val, const char *function, int line); u_char (*HFC_inb)(struct hfc_multi *hc, u_char reg, - const char *function, int line); + const char *function, int line); u_char (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg, - const char *function, int line); + const char *function, int line); u_short (*HFC_inw)(struct hfc_multi *hc, u_char reg, - const char *function, int line); + const char *function, int line); u_short (*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg, - const char *function, int line); + const char *function, int line); void (*HFC_wait)(struct hfc_multi *hc, - const char *function, int line); + const char *function, int line); void (*HFC_wait_nodebug)(struct hfc_multi *hc, - const char *function, int line); + const char *function, int line); #else void (*HFC_outb)(struct hfc_multi *hc, u_char reg, - u_char val); + u_char val); void (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg, - u_char val); + u_char val); u_char (*HFC_inb)(struct hfc_multi *hc, u_char reg); u_char (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg); u_short (*HFC_inw)(struct hfc_multi *hc, u_char reg); @@ -176,9 +176,9 @@ struct hfc_multi { void (*HFC_wait_nodebug)(struct hfc_multi *hc); #endif void (*read_fifo)(struct hfc_multi *hc, u_char *data, - int len); + int len); void (*write_fifo)(struct hfc_multi *hc, u_char *data, - int len); + int len); u_long pci_origmembase, plx_origmembase; void __iomem *pci_membase; /* PCI memory */ void __iomem *plx_membase; /* PLX memory */ @@ -205,18 +205,22 @@ struct hfc_multi { u_int slots; /* number of PCM slots */ u_int leds; /* type of leds */ - u_int ledcount; /* used to animate leds */ u_long ledstate; /* save last state of leds */ int opticalsupport; /* has the e1 board */ /* an optical Interface */ - int dslot; /* channel # of d-channel (E1) default 16 */ - u_long wdcount; /* every 500 ms we need to */ + u_int bmask[32]; /* bitmask of bchannels for port */ + u_char dnum[32]; /* array of used dchannel numbers for port */ + u_char created[32]; /* what port is created */ + u_int activity_tx; /* if there is data TX / RX */ + u_int activity_rx; /* bitmask according to port number */ + /* (will be cleared after */ + /* showing led-states) */ + u_int flash[8]; /* counter for flashing 8 leds on activity */ + + u_long wdcount; /* every 500 ms we need to */ /* send the watchdog a signal */ u_char wdbyte; /* watchdog toggle byte */ - u_int activity[8]; /* if there is any action on this */ - /* port (will be cleared after */ - /* showing led-states) */ int e1_state; /* keep track of last state */ int e1_getclock; /* if sync is retrieved from interface */ int syncronized; /* keep track of existing sync interface */ @@ -233,7 +237,6 @@ struct hfc_multi { * the bch->channel is equvalent to the hfc-channel */ struct hfc_chan chan[32]; - u_char created[8]; /* what port is created */ signed char slot_owner[256]; /* owner channel of slot */ }; @@ -268,7 +271,7 @@ struct hfc_multi { #define PLX_DSP_RES_N PLX_GPIO8 /* GPIO4..8 Enable & Set to OUT, SLAVE_EN_N = 1 */ #define PLX_GPIOC_INIT (PLX_GPIO4_DIR | PLX_GPIO5_DIR | PLX_GPIO6_DIR \ - | PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N) + | PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N) /* PLX Interrupt Control/STATUS */ #define PLX_INTCSR_LINTI1_ENABLE 0x01 @@ -290,7 +293,7 @@ struct hfc_multi { /* write only registers */ #define R_CIRM 0x00 #define R_CTRL 0x01 -#define R_BRG_PCM_CFG 0x02 +#define R_BRG_PCM_CFG 0x02 #define R_RAM_ADDR0 0x08 #define R_RAM_ADDR1 0x09 #define R_RAM_ADDR2 0x0A @@ -687,8 +690,8 @@ struct hfc_multi { #define V_NEG_CLK 0x08 #define V_HCLK 0x10 /* -#define V_JATT_AUTO_DEL 0x20 -#define V_JATT_AUTO 0x40 + #define V_JATT_AUTO_DEL 0x20 + #define V_JATT_AUTO 0x40 */ #define V_JATT_OFF 0x80 /* R_STATE */ @@ -1230,4 +1233,3 @@ struct hfc_register_names { {"R_IRQ_FIFO_BL7", 0xCF}, }; #endif /* HFC_REGISTER_DEBUG */ - |