diff options
Diffstat (limited to 'drivers/input/touchscreen/usbtouchscreen.c')
| -rw-r--r-- | drivers/input/touchscreen/usbtouchscreen.c | 468 |
1 files changed, 360 insertions, 108 deletions
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 567d57215c2..a0966331a89 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -16,6 +16,8 @@ * - JASTEC USB touch controller/DigiTech DTR-02U * - Zytronic capacitive touchscreen * - NEXIO/iNexio + * - Elo TouchSystems 2700 IntelliTouch + * - EasyTouch USB Dual/Multi touch controller from Data Modul * * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -49,7 +51,6 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/usb.h> #include <linux/usb/input.h> #include <linux/hid.h> @@ -59,11 +60,11 @@ #define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>" #define DRIVER_DESC "USB Touchscreen Driver" -static int swap_xy; +static bool swap_xy; module_param(swap_xy, bool, 0644); MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); -static int hwcalib_xy; +static bool hwcalib_xy; module_param(hwcalib_xy, bool, 0644); MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available"); @@ -95,6 +96,7 @@ struct usbtouch_device_info { int (*get_pkt_len) (unsigned char *pkt, int len); int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); + int (*alloc) (struct usbtouch_usb *usbtouch); int (*init) (struct usbtouch_usb *usbtouch); void (*exit) (struct usbtouch_usb *usbtouch); }; @@ -103,6 +105,7 @@ struct usbtouch_device_info { struct usbtouch_usb { unsigned char *data; dma_addr_t data_dma; + int data_size; unsigned char *buffer; int buf_len; struct urb *irq; @@ -135,18 +138,18 @@ enum { DEVTYPE_JASTEC, DEVTYPE_E2I, DEVTYPE_ZYTRONIC, - DEVTYPE_TC5UH, + DEVTYPE_TC45USB, DEVTYPE_NEXIO, + DEVTYPE_ELO, + DEVTYPE_ETOUCH, }; #define USB_DEVICE_HID_CLASS(vend, prod) \ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \ - | USB_DEVICE_ID_MATCH_INT_PROTOCOL \ | USB_DEVICE_ID_MATCH_DEVICE, \ .idVendor = (vend), \ .idProduct = (prod), \ - .bInterfaceClass = USB_INTERFACE_CLASS_HID, \ - .bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE + .bInterfaceClass = USB_INTERFACE_CLASS_HID static const struct usb_device_id usbtouch_devices[] = { #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX @@ -177,6 +180,7 @@ static const struct usb_device_id usbtouch_devices[] = { #ifdef CONFIG_TOUCHSCREEN_USB_ITM {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, + {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM}, #endif #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO @@ -222,8 +226,11 @@ static const struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC}, #endif -#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH - {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH}, +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB + /* TC5UH */ + {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC45USB}, + /* TC4UM */ + {USB_DEVICE(0x0664, 0x0306), .driver_info = DEVTYPE_TC45USB}, #endif #ifdef CONFIG_TOUCHSCREEN_USB_NEXIO @@ -234,6 +241,14 @@ static const struct usb_device_id usbtouch_devices[] = { .driver_info = DEVTYPE_NEXIO}, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + {USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO}, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + {USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH}, +#endif + {} }; @@ -252,8 +267,9 @@ static int e2i_init(struct usbtouch_usb *usbtouch) 0x01, 0x02, 0x0000, 0x0081, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d", - __func__, ret); + dev_dbg(&usbtouch->interface->dev, + "%s - usb_control_msg - E2I_RESET - bytes|err: %d\n", + __func__, ret); return ret; } @@ -286,6 +302,45 @@ static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #define EGALAX_PKT_TYPE_REPT 0x80 #define EGALAX_PKT_TYPE_DIAG 0x0A +static int egalax_init(struct usbtouch_usb *usbtouch) +{ + int ret, i; + unsigned char *buf; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + + /* + * An eGalax diagnostic packet kicks the device into using the right + * protocol. We send a "check active" packet. The response will be + * read later and ignored. + */ + + buf = kmalloc(3, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = EGALAX_PKT_TYPE_DIAG; + buf[1] = 1; /* length */ + buf[2] = 'A'; /* command - check active */ + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 3, + USB_CTRL_SET_TIMEOUT); + if (ret >= 0) { + ret = 0; + break; + } + if (ret != -EPIPE) + break; + } + + kfree(buf); + + return ret; +} + static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) @@ -315,6 +370,51 @@ static int egalax_get_pkt_len(unsigned char *buf, int len) } #endif +/***************************************************************************** + * EasyTouch part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif + +#define ETOUCH_PKT_TYPE_MASK 0xFE +#define ETOUCH_PKT_TYPE_REPT 0x80 +#define ETOUCH_PKT_TYPE_REPT2 0xB0 +#define ETOUCH_PKT_TYPE_DIAG 0x0A + +static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if ((pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT && + (pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT2) + return 0; + + dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static int etouch_get_pkt_len(unsigned char *buf, int len) +{ + switch (buf[0] & ETOUCH_PKT_TYPE_MASK) { + case ETOUCH_PKT_TYPE_REPT: + case ETOUCH_PKT_TYPE_REPT2: + return 5; + + case ETOUCH_PKT_TYPE_DIAG: + if (len < 2) + return -1; + + return buf[1] + 2; + } + + return 0; +} +#endif /***************************************************************************** * PanJit Part @@ -363,8 +463,9 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) MTOUCHUSB_RESET, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d", - __func__, ret); + dev_dbg(&usbtouch->interface->dev, + "%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n", + __func__, ret); if (ret < 0) return ret; msleep(150); @@ -374,8 +475,9 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) MTOUCHUSB_ASYNC_REPORT, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", - __func__, ret); + dev_dbg(&usbtouch->interface->dev, + "%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n", + __func__, ret); if (ret >= 0) break; if (ret != -EPIPE) @@ -507,7 +609,7 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) int ret = -ENOMEM; unsigned char *buf; - buf = kmalloc(2, GFP_KERNEL); + buf = kmalloc(2, GFP_NOIO); if (!buf) goto err_nobuf; /* reset */ @@ -574,10 +676,10 @@ static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #endif /***************************************************************************** - * ET&T TC5UH part + * ET&T TC5UH/TC4UM part */ -#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH -static int tc5uh_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB +static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; @@ -675,27 +777,29 @@ static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { + struct usb_interface *intf = dev->interface; + switch (pkt[0]) { case 0x3A: /* command response */ - dbg("%s: Command response %d", __func__, pkt[1]); + dev_dbg(&intf->dev, "%s: Command response %d\n", __func__, pkt[1]); break; case 0xC0: /* down */ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); dev->touch = 1; - dbg("%s: down %d,%d", __func__, dev->x, dev->y); + dev_dbg(&intf->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y); return 1; case 0x80: /* up */ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); dev->touch = 0; - dbg("%s: up %d,%d", __func__, dev->x, dev->y); + dev_dbg(&intf->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y); return 1; default: - dbg("%s: Unknown return %d", __func__, pkt[0]); + dev_dbg(&intf->dev, "%s: Unknown return %d\n", __func__, pkt[0]); break; } @@ -732,11 +836,44 @@ static void nexio_ack_complete(struct urb *urb) { } +static int nexio_alloc(struct usbtouch_usb *usbtouch) +{ + struct nexio_priv *priv; + int ret = -ENOMEM; + + usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL); + if (!usbtouch->priv) + goto out_buf; + + priv = usbtouch->priv; + + priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt), + GFP_KERNEL); + if (!priv->ack_buf) + goto err_priv; + + priv->ack = usb_alloc_urb(0, GFP_KERNEL); + if (!priv->ack) { + dev_dbg(&usbtouch->interface->dev, + "%s - usb_alloc_urb failed: usbtouch->ack\n", __func__); + goto err_ack_buf; + } + + return 0; + +err_ack_buf: + kfree(priv->ack_buf); +err_priv: + kfree(priv); +out_buf: + return ret; +} + static int nexio_init(struct usbtouch_usb *usbtouch) { struct usb_device *dev = interface_to_usbdev(usbtouch->interface); struct usb_host_interface *interface = usbtouch->interface->cur_altsetting; - struct nexio_priv *priv; + struct nexio_priv *priv = usbtouch->priv; int ret = -ENOMEM; int actual_len, i; unsigned char *buf; @@ -755,7 +892,7 @@ static int nexio_init(struct usbtouch_usb *usbtouch) if (!input_ep || !output_ep) return -ENXIO; - buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL); + buf = kmalloc(NEXIO_BUFSIZE, GFP_NOIO); if (!buf) goto out_buf; @@ -787,11 +924,11 @@ static int nexio_init(struct usbtouch_usb *usbtouch) switch (buf[0]) { case 0x83: /* firmware version */ if (!firmware_ver) - firmware_ver = kstrdup(&buf[2], GFP_KERNEL); + firmware_ver = kstrdup(&buf[2], GFP_NOIO); break; case 0x84: /* device name */ if (!device_name) - device_name = kstrdup(&buf[2], GFP_KERNEL); + device_name = kstrdup(&buf[2], GFP_NOIO); break; } } @@ -802,36 +939,11 @@ static int nexio_init(struct usbtouch_usb *usbtouch) kfree(firmware_ver); kfree(device_name); - /* prepare ACK URB */ - ret = -ENOMEM; - - usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL); - if (!usbtouch->priv) - goto out_buf; - - priv = usbtouch->priv; - - priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt), - GFP_KERNEL); - if (!priv->ack_buf) - goto err_priv; - - priv->ack = usb_alloc_urb(0, GFP_KERNEL); - if (!priv->ack) { - dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__); - goto err_ack_buf; - } - usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep), priv->ack_buf, sizeof(nexio_ack_pkt), nexio_ack_complete, usbtouch); ret = 0; - goto out_buf; -err_ack_buf: - kfree(priv->ack_buf); -err_priv: - kfree(priv); out_buf: kfree(buf); return ret; @@ -849,29 +961,32 @@ static void nexio_exit(struct usbtouch_usb *usbtouch) static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) { - int x, y, begin_x, begin_y, end_x, end_y, w, h, ret; struct nexio_touch_packet *packet = (void *) pkt; struct nexio_priv *priv = usbtouch->priv; + unsigned int data_len = be16_to_cpu(packet->data_len); + unsigned int x_len = be16_to_cpu(packet->x_len); + unsigned int y_len = be16_to_cpu(packet->y_len); + int x, y, begin_x, begin_y, end_x, end_y, w, h, ret; /* got touch data? */ if ((pkt[0] & 0xe0) != 0xe0) return 0; - if (be16_to_cpu(packet->data_len) > 0xff) - packet->data_len = cpu_to_be16(be16_to_cpu(packet->data_len) - 0x100); - if (be16_to_cpu(packet->x_len) > 0xff) - packet->x_len = cpu_to_be16(be16_to_cpu(packet->x_len) - 0x80); + if (data_len > 0xff) + data_len -= 0x100; + if (x_len > 0xff) + x_len -= 0x80; /* send ACK */ ret = usb_submit_urb(priv->ack, GFP_ATOMIC); if (!usbtouch->type->max_xc) { - usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len); - input_set_abs_params(usbtouch->input, ABS_X, 0, - 2 * be16_to_cpu(packet->x_len), 0, 0); - usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len); - input_set_abs_params(usbtouch->input, ABS_Y, 0, - 2 * be16_to_cpu(packet->y_len), 0, 0); + usbtouch->type->max_xc = 2 * x_len; + input_set_abs_params(usbtouch->input, ABS_X, + 0, usbtouch->type->max_xc, 0, 0); + usbtouch->type->max_yc = 2 * y_len; + input_set_abs_params(usbtouch->input, ABS_Y, + 0, usbtouch->type->max_yc, 0, 0); } /* * The device reports state of IR sensors on X and Y axes. @@ -881,22 +996,21 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) * it's disabled (and untested) here as there's no X driver for that. */ begin_x = end_x = begin_y = end_y = -1; - for (x = 0; x < be16_to_cpu(packet->x_len); x++) { + for (x = 0; x < x_len; x++) { if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) { begin_x = x; continue; } if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) { end_x = x - 1; - for (y = be16_to_cpu(packet->x_len); - y < be16_to_cpu(packet->data_len); y++) { + for (y = x_len; y < data_len; y++) { if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) { - begin_y = y - be16_to_cpu(packet->x_len); + begin_y = y - x_len; continue; } if (end_y == -1 && begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) { - end_y = y - 1 - be16_to_cpu(packet->x_len); + end_y = y - 1 - x_len; w = end_x - begin_x; h = end_y - begin_y; #if 0 @@ -931,6 +1045,24 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) /***************************************************************************** + * ELO part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + +static int elo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[3] << 8) | pkt[2]; + dev->y = (pkt[5] << 8) | pkt[4]; + dev->touch = pkt[6] > 0; + dev->press = pkt[6]; + + return 1; +} +#endif + + +/***************************************************************************** * the different device descriptors */ #ifdef MULTI_PACKET @@ -939,6 +1071,18 @@ static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, #endif static struct usbtouch_device_info usbtouch_dev_info[] = { +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + [DEVTYPE_ELO] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .max_press = 0xff, + .rept_size = 8, + .read_data = elo_read_data, + }, +#endif + #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX [DEVTYPE_EGALAX] = { .min_xc = 0x0, @@ -949,6 +1093,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .process_pkt = usbtouch_process_multi, .get_pkt_len = egalax_get_pkt_len, .read_data = egalax_read_data, + .init = egalax_init, }, #endif @@ -1104,14 +1249,14 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { }, #endif -#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH - [DEVTYPE_TC5UH] = { +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB + [DEVTYPE_TC45USB] = { .min_xc = 0x0, .max_xc = 0x0fff, .min_yc = 0x0, .max_yc = 0x0fff, .rept_size = 5, - .read_data = tc5uh_read_data, + .read_data = tc45usb_read_data, }, #endif @@ -1120,10 +1265,23 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .rept_size = 1024, .irq_always = true, .read_data = nexio_read_data, + .alloc = nexio_alloc, .init = nexio_init, .exit = nexio_exit, }, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + [DEVTYPE_ETOUCH] = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = etouch_get_pkt_len, + .read_data = etouch_read_data, + }, +#endif }; @@ -1235,6 +1393,7 @@ out_flush_buf: static void usbtouch_irq(struct urb *urb) { struct usbtouch_usb *usbtouch = urb->context; + struct device *dev = &usbtouch->interface->dev; int retval; switch (urb->status) { @@ -1243,59 +1402,126 @@ static void usbtouch_irq(struct urb *urb) break; case -ETIME: /* this urb is timing out */ - dbg("%s - urb timed out - was the device unplugged?", - __func__); + dev_dbg(dev, + "%s - urb timed out - was the device unplugged?\n", + __func__); return; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: case -EPIPE: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, urb->status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, urb->status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); goto exit; } usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length); exit: + usb_mark_last_busy(interface_to_usbdev(usbtouch->interface)); retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err("%s - usb_submit_urb failed with result: %d", - __func__, retval); + dev_err(dev, "%s - usb_submit_urb failed with result: %d\n", + __func__, retval); } static int usbtouch_open(struct input_dev *input) { struct usbtouch_usb *usbtouch = input_get_drvdata(input); + int r; usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface); + r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0; + if (r < 0) + goto out; + if (!usbtouch->type->irq_always) { - if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) - return -EIO; + if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) { + r = -EIO; + goto out_put; + } } - return 0; + usbtouch->interface->needs_remote_wakeup = 1; +out_put: + usb_autopm_put_interface(usbtouch->interface); +out: + return r; } static void usbtouch_close(struct input_dev *input) { struct usbtouch_usb *usbtouch = input_get_drvdata(input); + int r; if (!usbtouch->type->irq_always) usb_kill_urb(usbtouch->irq); + r = usb_autopm_get_interface(usbtouch->interface); + usbtouch->interface->needs_remote_wakeup = 0; + if (!r) + usb_autopm_put_interface(usbtouch->interface); } +static int usbtouch_suspend +(struct usb_interface *intf, pm_message_t message) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + usb_kill_urb(usbtouch->irq); + + return 0; +} + +static int usbtouch_resume(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + struct input_dev *input = usbtouch->input; + int result = 0; + + mutex_lock(&input->mutex); + if (input->users || usbtouch->type->irq_always) + result = usb_submit_urb(usbtouch->irq, GFP_NOIO); + mutex_unlock(&input->mutex); + + return result; +} + +static int usbtouch_reset_resume(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + struct input_dev *input = usbtouch->input; + int err = 0; + + /* reinit the device */ + if (usbtouch->type->init) { + err = usbtouch->type->init(usbtouch); + if (err) { + dev_dbg(&intf->dev, + "%s - type->init() failed, err: %d\n", + __func__, err); + return err; + } + } + + /* restart IO if needed */ + mutex_lock(&input->mutex); + if (input->users) + err = usb_submit_urb(usbtouch->irq, GFP_NOIO); + mutex_unlock(&input->mutex); + + return err; +} static void usbtouch_free_buffers(struct usb_device *udev, struct usbtouch_usb *usbtouch) { - usb_free_coherent(udev, usbtouch->type->rept_size, + usb_free_coherent(udev, usbtouch->data_size, usbtouch->data, usbtouch->data_dma); kfree(usbtouch->buffer); } @@ -1340,7 +1566,20 @@ static int usbtouch_probe(struct usb_interface *intf, if (!type->process_pkt) type->process_pkt = usbtouch_process_pkt; - usbtouch->data = usb_alloc_coherent(udev, type->rept_size, + usbtouch->data_size = type->rept_size; + if (type->get_pkt_len) { + /* + * When dealing with variable-length packets we should + * not request more than wMaxPacketSize bytes at once + * as we do not know if there is more data coming or + * we filled exactly wMaxPacketSize bytes and there is + * nothing else. + */ + usbtouch->data_size = min(usbtouch->data_size, + usb_endpoint_maxp(endpoint)); + } + + usbtouch->data = usb_alloc_coherent(udev, usbtouch->data_size, GFP_KERNEL, &usbtouch->data_dma); if (!usbtouch->data) goto out_free; @@ -1353,7 +1592,8 @@ static int usbtouch_probe(struct usb_interface *intf, usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL); if (!usbtouch->irq) { - dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__); + dev_dbg(&intf->dev, + "%s - usb_alloc_urb failed: usbtouch->irq\n", __func__); goto out_free_buffers; } @@ -1399,40 +1639,59 @@ static int usbtouch_probe(struct usb_interface *intf, if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT) usb_fill_int_urb(usbtouch->irq, udev, usb_rcvintpipe(udev, endpoint->bEndpointAddress), - usbtouch->data, type->rept_size, + usbtouch->data, usbtouch->data_size, usbtouch_irq, usbtouch, endpoint->bInterval); else usb_fill_bulk_urb(usbtouch->irq, udev, usb_rcvbulkpipe(udev, endpoint->bEndpointAddress), - usbtouch->data, type->rept_size, + usbtouch->data, usbtouch->data_size, usbtouch_irq, usbtouch); usbtouch->irq->dev = udev; usbtouch->irq->transfer_dma = usbtouch->data_dma; usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* device specific init */ + /* device specific allocations */ + if (type->alloc) { + err = type->alloc(usbtouch); + if (err) { + dev_dbg(&intf->dev, + "%s - type->alloc() failed, err: %d\n", + __func__, err); + goto out_free_urb; + } + } + + /* device specific initialisation*/ if (type->init) { err = type->init(usbtouch); if (err) { - dbg("%s - type->init() failed, err: %d", __func__, err); - goto out_free_urb; + dev_dbg(&intf->dev, + "%s - type->init() failed, err: %d\n", + __func__, err); + goto out_do_exit; } } err = input_register_device(usbtouch->input); if (err) { - dbg("%s - input_register_device failed, err: %d", __func__, err); + dev_dbg(&intf->dev, + "%s - input_register_device failed, err: %d\n", + __func__, err); goto out_do_exit; } usb_set_intfdata(intf, usbtouch); if (usbtouch->type->irq_always) { + /* this can't fail */ + usb_autopm_get_interface(intf); err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); if (err) { - err("%s - usb_submit_urb failed with result: %d", - __func__, err); + usb_autopm_put_interface(intf); + dev_err(&intf->dev, + "%s - usb_submit_urb failed with result: %d\n", + __func__, err); goto out_unregister_input; } } @@ -1459,12 +1718,12 @@ static void usbtouch_disconnect(struct usb_interface *intf) { struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); - dbg("%s - called", __func__); - if (!usbtouch) return; - dbg("%s - usbtouch is initialized, cleaning up", __func__); + dev_dbg(&intf->dev, + "%s - usbtouch is initialized, cleaning up\n", __func__); + usb_set_intfdata(intf, NULL); /* this will stop IO via close */ input_unregister_device(usbtouch->input); @@ -1481,21 +1740,14 @@ static struct usb_driver usbtouch_driver = { .name = "usbtouchscreen", .probe = usbtouch_probe, .disconnect = usbtouch_disconnect, + .suspend = usbtouch_suspend, + .resume = usbtouch_resume, + .reset_resume = usbtouch_reset_resume, .id_table = usbtouch_devices, + .supports_autosuspend = 1, }; -static int __init usbtouch_init(void) -{ - return usb_register(&usbtouch_driver); -} - -static void __exit usbtouch_cleanup(void) -{ - usb_deregister(&usbtouch_driver); -} - -module_init(usbtouch_init); -module_exit(usbtouch_cleanup); +module_usb_driver(usbtouch_driver); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); |