1 files changed, 223 insertions, 346 deletions

diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 607f9933aa1..b46c55cd1bb 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -5,6 +5,10 @@
  *  Created:	September 25, 2006
  *  Copyright:	MontaVista Software, Inc.
  *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesn't work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -15,134 +19,24 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/completion.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
 #include <linux/input.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
-#include <linux/suspend.h>
-#include <linux/slab.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-
-#include <sound/core.h>
-#include <sound/ac97_codec.h>
+#include <linux/ucb1400.h>
 
+#define UCB1400_TS_POLL_PERIOD	10 /* ms */
 
-/*
- * Interesting UCB1400 AC-link registers
- */
-
-#define UCB_IE_RIS		0x5e
-#define UCB_IE_FAL		0x60
-#define UCB_IE_STATUS		0x62
-#define UCB_IE_CLEAR		0x62
-#define UCB_IE_ADC		(1 << 11)
-#define UCB_IE_TSPX		(1 << 12)
-
-#define UCB_TS_CR		0x64
-#define UCB_TS_CR_TSMX_POW	(1 << 0)
-#define UCB_TS_CR_TSPX_POW	(1 << 1)
-#define UCB_TS_CR_TSMY_POW	(1 << 2)
-#define UCB_TS_CR_TSPY_POW	(1 << 3)
-#define UCB_TS_CR_TSMX_GND	(1 << 4)
-#define UCB_TS_CR_TSPX_GND	(1 << 5)
-#define UCB_TS_CR_TSMY_GND	(1 << 6)
-#define UCB_TS_CR_TSPY_GND	(1 << 7)
-#define UCB_TS_CR_MODE_INT	(0 << 8)
-#define UCB_TS_CR_MODE_PRES	(1 << 8)
-#define UCB_TS_CR_MODE_POS	(2 << 8)
-#define UCB_TS_CR_BIAS_ENA	(1 << 11)
-#define UCB_TS_CR_TSPX_LOW	(1 << 12)
-#define UCB_TS_CR_TSMX_LOW	(1 << 13)
-
-#define UCB_ADC_CR		0x66
-#define UCB_ADC_SYNC_ENA	(1 << 0)
-#define UCB_ADC_VREFBYP_CON	(1 << 1)
-#define UCB_ADC_INP_TSPX	(0 << 2)
-#define UCB_ADC_INP_TSMX	(1 << 2)
-#define UCB_ADC_INP_TSPY	(2 << 2)
-#define UCB_ADC_INP_TSMY	(3 << 2)
-#define UCB_ADC_INP_AD0		(4 << 2)
-#define UCB_ADC_INP_AD1		(5 << 2)
-#define UCB_ADC_INP_AD2		(6 << 2)
-#define UCB_ADC_INP_AD3		(7 << 2)
-#define UCB_ADC_EXT_REF		(1 << 5)
-#define UCB_ADC_START		(1 << 7)
-#define UCB_ADC_ENA		(1 << 15)
-
-#define UCB_ADC_DATA		0x68
-#define UCB_ADC_DAT_VALID	(1 << 15)
-#define UCB_ADC_DAT_VALUE(x)	((x) & 0x3ff)
-
-#define UCB_ID			0x7e
-#define UCB_ID_1400             0x4304
-
-
-struct ucb1400 {
-	struct snd_ac97		*ac97;
-	struct input_dev	*ts_idev;
-
-	int			irq;
-
-	wait_queue_head_t	ts_wait;
-	struct task_struct	*ts_task;
-
-	unsigned int		irq_pending;	/* not bit field shared */
-	unsigned int		ts_restart:1;
-	unsigned int		adcsync:1;
-};
-
-static int adcsync;
+static bool adcsync;
 static int ts_delay = 55; /* us */
 static int ts_delay_pressure;	/* us */
 
-static inline u16 ucb1400_reg_read(struct ucb1400 *ucb, u16 reg)
-{
-	return ucb->ac97->bus->ops->read(ucb->ac97, reg);
-}
-
-static inline void ucb1400_reg_write(struct ucb1400 *ucb, u16 reg, u16 val)
-{
-	ucb->ac97->bus->ops->write(ucb->ac97, reg, val);
-}
-
-static inline void ucb1400_adc_enable(struct ucb1400 *ucb)
-{
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
-}
-
-static unsigned int ucb1400_adc_read(struct ucb1400 *ucb, u16 adc_channel)
-{
-	unsigned int val;
-
-	if (ucb->adcsync)
-		adc_channel |= UCB_ADC_SYNC_ENA;
-
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel | UCB_ADC_START);
-
-	for (;;) {
-		val = ucb1400_reg_read(ucb, UCB_ADC_DATA);
-		if (val & UCB_ADC_DAT_VALID)
-			break;
-		/* yield to other processes */
-		schedule_timeout_uninterruptible(1);
-	}
-
-	return UCB_ADC_DAT_VALUE(val);
-}
-
-static inline void ucb1400_adc_disable(struct ucb1400 *ucb)
-{
-	ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
-}
-
 /* Switch to interrupt mode. */
-static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
+static void ucb1400_ts_mode_int(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
 			UCB_TS_CR_MODE_INT);
@@ -152,14 +46,16 @@ static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
  * Switch to pressure mode, and read pressure.  We don't need to wait
  * here, since both plates are being driven.
  */
-static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
+static unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+
 	udelay(ts_delay_pressure);
-	return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
 }
 
 /*
@@ -168,21 +64,21 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
  * gives a faster response time.  Even so, we need to wait about 55us
  * for things to stabilise.
  */
-static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
+static unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
 
 	udelay(ts_delay);
 
-	return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
 }
 
 /*
@@ -191,228 +87,183 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
  * gives a faster response time.  Even so, we need to wait about 55us
  * for things to stabilise.
  */
-static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400 *ucb)
+static int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
 
 	udelay(ts_delay);
 
-	return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPX);
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
 }
 
 /*
  * Switch to X plate resistance mode.  Set MX to ground, PX to
  * supply.  Measure current.
  */
-static inline unsigned int ucb1400_ts_read_xres(struct ucb1400 *ucb)
+static unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	return ucb1400_adc_read(ucb, 0);
+	return ucb1400_adc_read(ucb->ac97, 0, adcsync);
 }
 
 /*
  * Switch to Y plate resistance mode.  Set MY to ground, PY to
  * supply.  Measure current.
  */
-static inline unsigned int ucb1400_ts_read_yres(struct ucb1400 *ucb)
+static unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	return ucb1400_adc_read(ucb, 0);
+	return ucb1400_adc_read(ucb->ac97, 0, adcsync);
 }
 
-static inline int ucb1400_ts_pen_down(struct ucb1400 *ucb)
+static int ucb1400_ts_pen_up(struct ucb1400_ts *ucb)
 {
-	unsigned short val = ucb1400_reg_read(ucb, UCB_TS_CR);
-	return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
+	unsigned short val = ucb1400_reg_read(ucb->ac97, UCB_TS_CR);
+
+	return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
 }
 
-static inline void ucb1400_ts_irq_enable(struct ucb1400 *ucb)
+static void ucb1400_ts_irq_enable(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, UCB_IE_TSPX);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
-	ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_TSPX);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_TSPX);
 }
 
-static inline void ucb1400_ts_irq_disable(struct ucb1400 *ucb)
+static void ucb1400_ts_irq_disable(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
 }
 
-static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
+static void ucb1400_ts_report_event(struct input_dev *idev, u16 pressure, u16 x, u16 y)
 {
 	input_report_abs(idev, ABS_X, x);
 	input_report_abs(idev, ABS_Y, y);
 	input_report_abs(idev, ABS_PRESSURE, pressure);
+	input_report_key(idev, BTN_TOUCH, 1);
 	input_sync(idev);
 }
 
 static void ucb1400_ts_event_release(struct input_dev *idev)
 {
 	input_report_abs(idev, ABS_PRESSURE, 0);
+	input_report_key(idev, BTN_TOUCH, 0);
 	input_sync(idev);
 }
 
-static void ucb1400_handle_pending_irq(struct ucb1400 *ucb)
+static void ucb1400_clear_pending_irq(struct ucb1400_ts *ucb)
 {
 	unsigned int isr;
 
-	isr = ucb1400_reg_read(ucb, UCB_IE_STATUS);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, isr);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+	isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
 	if (isr & UCB_IE_TSPX)
 		ucb1400_ts_irq_disable(ucb);
 	else
-		printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
-
-	enable_irq(ucb->irq);
+		dev_dbg(&ucb->ts_idev->dev,
+			"ucb1400: unexpected IE_STATUS = %#x\n", isr);
 }
 
-static int ucb1400_ts_thread(void *_ucb)
+/*
+ * A restriction with interrupts exists when using the ucb1400, as
+ * the codec read/write routines may sleep while waiting for codec
+ * access completion and uses semaphores for access control to the
+ * AC97 bus. Therefore the driver is forced to use threaded interrupt
+ * handler.
+ */
+static irqreturn_t ucb1400_irq(int irqnr, void *devid)
 {
-	struct ucb1400 *ucb = _ucb;
-	struct task_struct *tsk = current;
-	int valid = 0;
-	struct sched_param param = { .sched_priority = 1 };
+	struct ucb1400_ts *ucb = devid;
+	unsigned int x, y, p;
+	bool penup;
 
-	sched_setscheduler(tsk, SCHED_FIFO, &param);
+	if (unlikely(irqnr != ucb->irq))
+		return IRQ_NONE;
 
-	set_freezable();
-	while (!kthread_should_stop()) {
-		unsigned int x, y, p;
-		long timeout;
+	ucb1400_clear_pending_irq(ucb);
 
-		ucb->ts_restart = 0;
+	/* Start with a small delay before checking pendown state */
+	msleep(UCB1400_TS_POLL_PERIOD);
 
-		if (ucb->irq_pending) {
-			ucb->irq_pending = 0;
-			ucb1400_handle_pending_irq(ucb);
-		}
+	while (!ucb->stopped && !(penup = ucb1400_ts_pen_up(ucb))) {
 
-		ucb1400_adc_enable(ucb);
+		ucb1400_adc_enable(ucb->ac97);
 		x = ucb1400_ts_read_xpos(ucb);
 		y = ucb1400_ts_read_ypos(ucb);
 		p = ucb1400_ts_read_pressure(ucb);
-		ucb1400_adc_disable(ucb);
-
-		/* Switch back to interrupt mode. */
-		ucb1400_ts_mode_int(ucb);
+		ucb1400_adc_disable(ucb->ac97);
 
-		msleep(10);
-
-		if (ucb1400_ts_pen_down(ucb)) {
-			ucb1400_ts_irq_enable(ucb);
-
-			/*
-			 * If we spat out a valid sample set last time,
-			 * spit out a "pen off" sample here.
-			 */
-			if (valid) {
-				ucb1400_ts_event_release(ucb->ts_idev);
-				valid = 0;
-			}
-
-			timeout = MAX_SCHEDULE_TIMEOUT;
-		} else {
-			valid = 1;
-			ucb1400_ts_evt_add(ucb->ts_idev, p, x, y);
-			timeout = msecs_to_jiffies(10);
-		}
+		ucb1400_ts_report_event(ucb->ts_idev, p, x, y);
 
-		wait_event_freezable_timeout(ucb->ts_wait,
-			ucb->irq_pending || ucb->ts_restart || kthread_should_stop(),
-			timeout);
+		wait_event_timeout(ucb->ts_wait, ucb->stopped,
+				   msecs_to_jiffies(UCB1400_TS_POLL_PERIOD));
 	}
 
-	/* Send the "pen off" if we are stopping with the pen still active */
-	if (valid)
-		ucb1400_ts_event_release(ucb->ts_idev);
+	ucb1400_ts_event_release(ucb->ts_idev);
 
-	ucb->ts_task = NULL;
-	return 0;
+	if (!ucb->stopped) {
+		/* Switch back to interrupt mode. */
+		ucb1400_ts_mode_int(ucb);
+		ucb1400_ts_irq_enable(ucb);
+	}
+
+	return IRQ_HANDLED;
 }
 
-/*
- * A restriction with interrupts exists when using the ucb1400, as
- * the codec read/write routines may sleep while waiting for codec
- * access completion and uses semaphores for access control to the
- * AC97 bus.  A complete codec read cycle could take  anywhere from
- * 60 to 100uSec so we *definitely* don't want to spin inside the
- * interrupt handler waiting for codec access.  So, we handle the
- * interrupt by scheduling a RT kernel thread to run in process
- * context instead of interrupt context.
- */
-static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
+static void ucb1400_ts_stop(struct ucb1400_ts *ucb)
 {
-	struct ucb1400 *ucb = devid;
+	/* Signal IRQ thread to stop polling and disable the handler. */
+	ucb->stopped = true;
+	mb();
+	wake_up(&ucb->ts_wait);
+	disable_irq(ucb->irq);
 
-	if (irqnr == ucb->irq) {
-		disable_irq(ucb->irq);
-		ucb->irq_pending = 1;
-		wake_up(&ucb->ts_wait);
-		return IRQ_HANDLED;
-	}
-	return IRQ_NONE;
+	ucb1400_ts_irq_disable(ucb);
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
 }
 
-static int ucb1400_ts_open(struct input_dev *idev)
+/* Must be called with ts->lock held */
+static void ucb1400_ts_start(struct ucb1400_ts *ucb)
 {
-	struct ucb1400 *ucb = input_get_drvdata(idev);
-	int ret = 0;
+	/* Tell IRQ thread that it may poll the device. */
+	ucb->stopped = false;
+	mb();
 
-	BUG_ON(ucb->ts_task);
+	ucb1400_ts_mode_int(ucb);
+	ucb1400_ts_irq_enable(ucb);
 
-	ucb->ts_task = kthread_run(ucb1400_ts_thread, ucb, "UCB1400_ts");
-	if (IS_ERR(ucb->ts_task)) {
-		ret = PTR_ERR(ucb->ts_task);
-		ucb->ts_task = NULL;
-	}
-
-	return ret;
+	enable_irq(ucb->irq);
 }
 
-static void ucb1400_ts_close(struct input_dev *idev)
+static int ucb1400_ts_open(struct input_dev *idev)
 {
-	struct ucb1400 *ucb = input_get_drvdata(idev);
+	struct ucb1400_ts *ucb = input_get_drvdata(idev);
 
-	if (ucb->ts_task)
-		kthread_stop(ucb->ts_task);
+	ucb1400_ts_start(ucb);
 
-	ucb1400_ts_irq_disable(ucb);
-	ucb1400_reg_write(ucb, UCB_TS_CR, 0);
+	return 0;
 }
 
-#ifdef CONFIG_PM
-static int ucb1400_ts_resume(struct device *dev)
+static void ucb1400_ts_close(struct input_dev *idev)
 {
-	struct ucb1400 *ucb = dev_get_drvdata(dev);
-
-	if (ucb->ts_task) {
-		/*
-		 * Restart the TS thread to ensure the
-		 * TS interrupt mode is set up again
-		 * after sleep.
-		 */
-		ucb->ts_restart = 1;
-		wake_up(&ucb->ts_wait);
-	}
-	return 0;
+	struct ucb1400_ts *ucb = input_get_drvdata(idev);
+
+	ucb1400_ts_stop(ucb);
 }
-#else
-#define ucb1400_ts_resume NULL
-#endif
 
 #ifndef NO_IRQ
 #define NO_IRQ	0
@@ -422,43 +273,41 @@ static int ucb1400_ts_resume(struct device *dev)
  * Try to probe our interrupt, rather than relying on lots of
  * hard-coded machine dependencies.
  */
-static int ucb1400_detect_irq(struct ucb1400 *ucb)
+static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb,
+					   struct platform_device *pdev)
 {
 	unsigned long mask, timeout;
 
 	mask = probe_irq_on();
-	if (!mask) {
-		probe_irq_off(mask);
-		return -EBUSY;
-	}
 
 	/* Enable the ADC interrupt. */
-	ucb1400_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
-	ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
 	/* Cause an ADC interrupt. */
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
 
 	/* Wait for the conversion to complete. */
 	timeout = jiffies + HZ/2;
-	while (!(ucb1400_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VALID)) {
+	while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
+						UCB_ADC_DAT_VALID)) {
 		cpu_relax();
 		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
+			dev_err(&pdev->dev, "timed out in IRQ probe\n");
 			probe_irq_off(mask);
 			return -ENODEV;
 		}
 	}
-	ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
 
 	/* Disable and clear interrupt. */
-	ucb1400_reg_write(ucb, UCB_IE_RIS, 0);
-	ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
 	/* Read triggered interrupt. */
 	ucb->irq = probe_irq_off(mask);
@@ -468,122 +317,150 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
 	return 0;
 }
 
-static int ucb1400_ts_probe(struct device *dev)
+static int ucb1400_ts_probe(struct platform_device *pdev)
 {
-	struct ucb1400 *ucb;
-	struct input_dev *idev;
-	int error, id, x_res, y_res;
+	struct ucb1400_ts *ucb = dev_get_platdata(&pdev->dev);
+	int error, x_res, y_res;
+	u16 fcsr;
 
-	ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
-	idev = input_allocate_device();
-	if (!ucb || !idev) {
+	ucb->ts_idev = input_allocate_device();
+	if (!ucb->ts_idev) {
 		error = -ENOMEM;
-		goto err_free_devs;
+		goto err;
 	}
 
-	ucb->ts_idev = idev;
-	ucb->adcsync = adcsync;
-	ucb->ac97 = to_ac97_t(dev);
+	/* Only in case the IRQ line wasn't supplied, try detecting it */
+	if (ucb->irq < 0) {
+		error = ucb1400_ts_detect_irq(ucb, pdev);
+		if (error) {
+			dev_err(&pdev->dev, "IRQ probe failed\n");
+			goto err_free_devs;
+		}
+	}
+	dev_dbg(&pdev->dev, "found IRQ %d\n", ucb->irq);
+
 	init_waitqueue_head(&ucb->ts_wait);
 
-	id = ucb1400_reg_read(ucb, UCB_ID);
-	if (id != UCB_ID_1400) {
-		error = -ENODEV;
-		goto err_free_devs;
-	}
+	input_set_drvdata(ucb->ts_idev, ucb);
+
+	ucb->ts_idev->dev.parent	= &pdev->dev;
+	ucb->ts_idev->name		= "UCB1400 touchscreen interface";
+	ucb->ts_idev->id.vendor		= ucb1400_reg_read(ucb->ac97,
+						AC97_VENDOR_ID1);
+	ucb->ts_idev->id.product	= ucb->id;
+	ucb->ts_idev->open		= ucb1400_ts_open;
+	ucb->ts_idev->close		= ucb1400_ts_close;
+	ucb->ts_idev->evbit[0]		= BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
+	ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	/*
+	 * Enable ADC filter to prevent horrible jitter on Colibri.
+	 * This also further reduces jitter on boards where ADCSYNC
+	 * pin is connected.
+	 */
+	fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
+	ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
+
+	ucb1400_adc_enable(ucb->ac97);
+	x_res = ucb1400_ts_read_xres(ucb);
+	y_res = ucb1400_ts_read_yres(ucb);
+	ucb1400_adc_disable(ucb->ac97);
+	dev_dbg(&pdev->dev, "x/y = %d/%d\n", x_res, y_res);
 
-	error = ucb1400_detect_irq(ucb);
-	if (error) {
-		printk(KERN_ERR "UCB1400: IRQ probe failed\n");
-		goto err_free_devs;
-	}
+	input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
 
-	error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
-				"UCB1400", ucb);
+	ucb1400_ts_stop(ucb);
+
+	error = request_threaded_irq(ucb->irq, NULL, ucb1400_irq,
+				     IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				     "UCB1400", ucb);
 	if (error) {
-		printk(KERN_ERR "ucb1400: unable to grab irq%d: %d\n",
-				ucb->irq, error);
+		dev_err(&pdev->dev,
+			"unable to grab irq%d: %d\n", ucb->irq, error);
 		goto err_free_devs;
 	}
-	printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
-
-	input_set_drvdata(idev, ucb);
 
-	idev->dev.parent	= dev;
-	idev->name		= "UCB1400 touchscreen interface";
-	idev->id.vendor		= ucb1400_reg_read(ucb, AC97_VENDOR_ID1);
-	idev->id.product	= id;
-	idev->open		= ucb1400_ts_open;
-	idev->close		= ucb1400_ts_close;
-	idev->evbit[0]		= BIT_MASK(EV_ABS);
-
-	ucb1400_adc_enable(ucb);
-	x_res = ucb1400_ts_read_xres(ucb);
-	y_res = ucb1400_ts_read_yres(ucb);
-	ucb1400_adc_disable(ucb);
-	printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
-
-	input_set_abs_params(idev, ABS_X, 0, x_res, 0, 0);
-	input_set_abs_params(idev, ABS_Y, 0, y_res, 0, 0);
-	input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
-
-	error = input_register_device(idev);
+	error = input_register_device(ucb->ts_idev);
 	if (error)
 		goto err_free_irq;
 
-	dev_set_drvdata(dev, ucb);
 	return 0;
 
- err_free_irq:
+err_free_irq:
 	free_irq(ucb->irq, ucb);
- err_free_devs:
-	input_free_device(idev);
-	kfree(ucb);
+err_free_devs:
+	input_free_device(ucb->ts_idev);
+err:
 	return error;
 }
 
-static int ucb1400_ts_remove(struct device *dev)
+static int ucb1400_ts_remove(struct platform_device *pdev)
 {
-	struct ucb1400 *ucb = dev_get_drvdata(dev);
+	struct ucb1400_ts *ucb = dev_get_platdata(&pdev->dev);
 
 	free_irq(ucb->irq, ucb);
 	input_unregister_device(ucb->ts_idev);
-	dev_set_drvdata(dev, NULL);
-	kfree(ucb);
+
 	return 0;
 }
 
-static struct device_driver ucb1400_ts_driver = {
-	.name		= "ucb1400_ts",
-	.owner		= THIS_MODULE,
-	.bus		= &ac97_bus_type,
-	.probe		= ucb1400_ts_probe,
-	.remove		= ucb1400_ts_remove,
-	.resume		= ucb1400_ts_resume,
-};
-
-static int __init ucb1400_ts_init(void)
+#ifdef CONFIG_PM_SLEEP
+static int ucb1400_ts_suspend(struct device *dev)
 {
-	return driver_register(&ucb1400_ts_driver);
+	struct ucb1400_ts *ucb = dev_get_platdata(dev);
+	struct input_dev *idev = ucb->ts_idev;
+
+	mutex_lock(&idev->mutex);
+
+	if (idev->users)
+		ucb1400_ts_start(ucb);
+
+	mutex_unlock(&idev->mutex);
+	return 0;
 }
 
-static void __exit ucb1400_ts_exit(void)
+static int ucb1400_ts_resume(struct device *dev)
 {
-	driver_unregister(&ucb1400_ts_driver);
+	struct ucb1400_ts *ucb = dev_get_platdata(dev);
+	struct input_dev *idev = ucb->ts_idev;
+
+	mutex_lock(&idev->mutex);
+
+	if (idev->users)
+		ucb1400_ts_stop(ucb);
+
+	mutex_unlock(&idev->mutex);
+	return 0;
 }
+#endif
+
+static SIMPLE_DEV_PM_OPS(ucb1400_ts_pm_ops,
+			 ucb1400_ts_suspend, ucb1400_ts_resume);
+
+static struct platform_driver ucb1400_ts_driver = {
+	.probe	= ucb1400_ts_probe,
+	.remove	= ucb1400_ts_remove,
+	.driver	= {
+		.name	= "ucb1400_ts",
+		.owner	= THIS_MODULE,
+		.pm	= &ucb1400_ts_pm_ops,
+	},
+};
+module_platform_driver(ucb1400_ts_driver);
 
 module_param(adcsync, bool, 0444);
 MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
 
 module_param(ts_delay, int, 0444);
-MODULE_PARM_DESC(ts_delay, "Delay between panel setup and position read. Default = 55us.");
+MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
+			    " position read. Default = 55us.");
 
 module_param(ts_delay_pressure, int, 0444);
 MODULE_PARM_DESC(ts_delay_pressure,
-		  "delay between panel setup and pressure read.  Default = 0us.");
-
-module_init(ucb1400_ts_init);
-module_exit(ucb1400_ts_exit);
+		"delay between panel setup and pressure read."
+		"  Default = 0us.");
 
 MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver");
 MODULE_LICENSE("GPL");