diff options
Diffstat (limited to 'drivers/input/touchscreen/pixcir_i2c_ts.c')
| -rw-r--r-- | drivers/input/touchscreen/pixcir_i2c_ts.c | 441 |
1 files changed, 441 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c new file mode 100644 index 00000000000..19c6c0fdc94 --- /dev/null +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -0,0 +1,441 @@ +/* + * Driver for Pixcir I2C touchscreen controllers. + * + * Copyright (C) 2010-2011 Pixcir, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/pixcir_ts.h> +#include <linux/gpio.h> + +struct pixcir_i2c_ts_data { + struct i2c_client *client; + struct input_dev *input; + const struct pixcir_ts_platform_data *chip; + bool running; +}; + +static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) +{ + struct pixcir_i2c_ts_data *tsdata = data; + u8 rdbuf[10], wrbuf[1] = { 0 }; + u8 touch; + int ret; + + ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); + if (ret != sizeof(wrbuf)) { + dev_err(&tsdata->client->dev, + "%s: i2c_master_send failed(), ret=%d\n", + __func__, ret); + return; + } + + ret = i2c_master_recv(tsdata->client, rdbuf, sizeof(rdbuf)); + if (ret != sizeof(rdbuf)) { + dev_err(&tsdata->client->dev, + "%s: i2c_master_recv failed(), ret=%d\n", + __func__, ret); + return; + } + + touch = rdbuf[0]; + if (touch) { + u16 posx1 = (rdbuf[3] << 8) | rdbuf[2]; + u16 posy1 = (rdbuf[5] << 8) | rdbuf[4]; + u16 posx2 = (rdbuf[7] << 8) | rdbuf[6]; + u16 posy2 = (rdbuf[9] << 8) | rdbuf[8]; + + input_report_key(tsdata->input, BTN_TOUCH, 1); + input_report_abs(tsdata->input, ABS_X, posx1); + input_report_abs(tsdata->input, ABS_Y, posy1); + + input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1); + input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1); + input_mt_sync(tsdata->input); + + if (touch == 2) { + input_report_abs(tsdata->input, + ABS_MT_POSITION_X, posx2); + input_report_abs(tsdata->input, + ABS_MT_POSITION_Y, posy2); + input_mt_sync(tsdata->input); + } + } else { + input_report_key(tsdata->input, BTN_TOUCH, 0); + } + + input_sync(tsdata->input); +} + +static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) +{ + struct pixcir_i2c_ts_data *tsdata = dev_id; + const struct pixcir_ts_platform_data *pdata = tsdata->chip; + + while (tsdata->running) { + pixcir_ts_poscheck(tsdata); + + if (gpio_get_value(pdata->gpio_attb)) + break; + + msleep(20); + } + + return IRQ_HANDLED; +} + +static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, + enum pixcir_power_mode mode) +{ + struct device *dev = &ts->client->dev; + int ret; + + ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE); + if (ret < 0) { + dev_err(dev, "%s: can't read reg 0x%x : %d\n", + __func__, PIXCIR_REG_POWER_MODE, ret); + return ret; + } + + ret &= ~PIXCIR_POWER_MODE_MASK; + ret |= mode; + + /* Always AUTO_IDLE */ + ret |= PIXCIR_POWER_ALLOW_IDLE; + + ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_POWER_MODE, ret); + if (ret < 0) { + dev_err(dev, "%s: can't write reg 0x%x : %d\n", + __func__, PIXCIR_REG_POWER_MODE, ret); + return ret; + } + + return 0; +} + +/* + * Set the interrupt mode for the device i.e. ATTB line behaviour + * + * @polarity : 1 for active high, 0 for active low. + */ +static int pixcir_set_int_mode(struct pixcir_i2c_ts_data *ts, + enum pixcir_int_mode mode, bool polarity) +{ + struct device *dev = &ts->client->dev; + int ret; + + ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE); + if (ret < 0) { + dev_err(dev, "%s: can't read reg 0x%x : %d\n", + __func__, PIXCIR_REG_INT_MODE, ret); + return ret; + } + + ret &= ~PIXCIR_INT_MODE_MASK; + ret |= mode; + + if (polarity) + ret |= PIXCIR_INT_POL_HIGH; + else + ret &= ~PIXCIR_INT_POL_HIGH; + + ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret); + if (ret < 0) { + dev_err(dev, "%s: can't write reg 0x%x : %d\n", + __func__, PIXCIR_REG_INT_MODE, ret); + return ret; + } + + return 0; +} + +/* + * Enable/disable interrupt generation + */ +static int pixcir_int_enable(struct pixcir_i2c_ts_data *ts, bool enable) +{ + struct device *dev = &ts->client->dev; + int ret; + + ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE); + if (ret < 0) { + dev_err(dev, "%s: can't read reg 0x%x : %d\n", + __func__, PIXCIR_REG_INT_MODE, ret); + return ret; + } + + if (enable) + ret |= PIXCIR_INT_ENABLE; + else + ret &= ~PIXCIR_INT_ENABLE; + + ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret); + if (ret < 0) { + dev_err(dev, "%s: can't write reg 0x%x : %d\n", + __func__, PIXCIR_REG_INT_MODE, ret); + return ret; + } + + return 0; +} + +static int pixcir_start(struct pixcir_i2c_ts_data *ts) +{ + struct device *dev = &ts->client->dev; + int error; + + /* LEVEL_TOUCH interrupt with active low polarity */ + error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0); + if (error) { + dev_err(dev, "Failed to set interrupt mode: %d\n", error); + return error; + } + + ts->running = true; + mb(); /* Update status before IRQ can fire */ + + /* enable interrupt generation */ + error = pixcir_int_enable(ts, true); + if (error) { + dev_err(dev, "Failed to enable interrupt generation: %d\n", + error); + return error; + } + + return 0; +} + +static int pixcir_stop(struct pixcir_i2c_ts_data *ts) +{ + int error; + + /* Disable interrupt generation */ + error = pixcir_int_enable(ts, false); + if (error) { + dev_err(&ts->client->dev, + "Failed to disable interrupt generation: %d\n", + error); + return error; + } + + /* Exit ISR if running, no more report parsing */ + ts->running = false; + mb(); /* update status before we synchronize irq */ + + /* Wait till running ISR is complete */ + synchronize_irq(ts->client->irq); + + return 0; +} + +static int pixcir_input_open(struct input_dev *dev) +{ + struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev); + + return pixcir_start(ts); +} + +static void pixcir_input_close(struct input_dev *dev) +{ + struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev); + + pixcir_stop(ts); +} + +#ifdef CONFIG_PM_SLEEP +static int pixcir_i2c_ts_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client); + struct input_dev *input = ts->input; + int ret = 0; + + mutex_lock(&input->mutex); + + if (device_may_wakeup(&client->dev)) { + if (!input->users) { + ret = pixcir_start(ts); + if (ret) { + dev_err(dev, "Failed to start\n"); + goto unlock; + } + } + + enable_irq_wake(client->irq); + } else if (input->users) { + ret = pixcir_stop(ts); + } + +unlock: + mutex_unlock(&input->mutex); + + return ret; +} + +static int pixcir_i2c_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client); + struct input_dev *input = ts->input; + int ret = 0; + + mutex_lock(&input->mutex); + + if (device_may_wakeup(&client->dev)) { + disable_irq_wake(client->irq); + + if (!input->users) { + ret = pixcir_stop(ts); + if (ret) { + dev_err(dev, "Failed to stop\n"); + goto unlock; + } + } + } else if (input->users) { + ret = pixcir_start(ts); + } + +unlock: + mutex_unlock(&input->mutex); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops, + pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume); + +static int pixcir_i2c_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct pixcir_ts_platform_data *pdata = + dev_get_platdata(&client->dev); + struct device *dev = &client->dev; + struct pixcir_i2c_ts_data *tsdata; + struct input_dev *input; + int error; + + if (!pdata) { + dev_err(&client->dev, "platform data not defined\n"); + return -EINVAL; + } + + if (!gpio_is_valid(pdata->gpio_attb)) { + dev_err(dev, "Invalid gpio_attb in pdata\n"); + return -EINVAL; + } + + tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL); + if (!tsdata) + return -ENOMEM; + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "Failed to allocate input device\n"); + return -ENOMEM; + } + + tsdata->client = client; + tsdata->input = input; + tsdata->chip = pdata; + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->open = pixcir_input_open; + input->close = pixcir_input_close; + input->dev.parent = &client->dev; + + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + input_set_abs_params(input, ABS_X, 0, pdata->x_max, 0, 0); + input_set_abs_params(input, ABS_Y, 0, pdata->y_max, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); + + input_set_drvdata(input, tsdata); + + error = devm_gpio_request_one(dev, pdata->gpio_attb, + GPIOF_DIR_IN, "pixcir_i2c_attb"); + if (error) { + dev_err(dev, "Failed to request ATTB gpio\n"); + return error; + } + + error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->name, tsdata); + if (error) { + dev_err(dev, "failed to request irq %d\n", client->irq); + return error; + } + + /* Always be in IDLE mode to save power, device supports auto wake */ + error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE); + if (error) { + dev_err(dev, "Failed to set IDLE mode\n"); + return error; + } + + /* Stop device till opened */ + error = pixcir_stop(tsdata); + if (error) + return error; + + error = input_register_device(input); + if (error) + return error; + + i2c_set_clientdata(client, tsdata); + device_init_wakeup(&client->dev, 1); + + return 0; +} + +static int pixcir_i2c_ts_remove(struct i2c_client *client) +{ + device_init_wakeup(&client->dev, 0); + + return 0; +} + +static const struct i2c_device_id pixcir_i2c_ts_id[] = { + { "pixcir_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id); + +static struct i2c_driver pixcir_i2c_ts_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "pixcir_ts", + .pm = &pixcir_dev_pm_ops, + }, + .probe = pixcir_i2c_ts_probe, + .remove = pixcir_i2c_ts_remove, + .id_table = pixcir_i2c_ts_id, +}; + +module_i2c_driver(pixcir_i2c_ts_driver); + +MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>"); +MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); |