1 files changed, 248 insertions, 36 deletions

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 6cc6b36663f..19c6c0fdc94 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -24,12 +24,13 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/pixcir_ts.h>
+#include <linux/gpio.h>
 
 struct pixcir_i2c_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input;
 	const struct pixcir_ts_platform_data *chip;
-	bool exiting;
+	bool running;
 };
 
 static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
@@ -87,11 +88,12 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
 static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
 {
 	struct pixcir_i2c_ts_data *tsdata = dev_id;
+	const struct pixcir_ts_platform_data *pdata = tsdata->chip;
 
-	while (!tsdata->exiting) {
+	while (tsdata->running) {
 		pixcir_ts_poscheck(tsdata);
 
-		if (tsdata->chip->attb_read_val())
+		if (gpio_get_value(pdata->gpio_attb))
 			break;
 
 		msleep(20);
@@ -100,25 +102,221 @@ static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
+				 enum pixcir_power_mode mode)
+{
+	struct device *dev = &ts->client->dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_POWER_MODE, ret);
+		return ret;
+	}
+
+	ret &= ~PIXCIR_POWER_MODE_MASK;
+	ret |= mode;
+
+	/* Always AUTO_IDLE */
+	ret |= PIXCIR_POWER_ALLOW_IDLE;
+
+	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_POWER_MODE, ret);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_POWER_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Set the interrupt mode for the device i.e. ATTB line behaviour
+ *
+ * @polarity : 1 for active high, 0 for active low.
+ */
+static int pixcir_set_int_mode(struct pixcir_i2c_ts_data *ts,
+			       enum pixcir_int_mode mode, bool polarity)
+{
+	struct device *dev = &ts->client->dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	ret &= ~PIXCIR_INT_MODE_MASK;
+	ret |= mode;
+
+	if (polarity)
+		ret |= PIXCIR_INT_POL_HIGH;
+	else
+		ret &= ~PIXCIR_INT_POL_HIGH;
+
+	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Enable/disable interrupt generation
+ */
+static int pixcir_int_enable(struct pixcir_i2c_ts_data *ts, bool enable)
+{
+	struct device *dev = &ts->client->dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	if (enable)
+		ret |= PIXCIR_INT_ENABLE;
+	else
+		ret &= ~PIXCIR_INT_ENABLE;
+
+	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pixcir_start(struct pixcir_i2c_ts_data *ts)
+{
+	struct device *dev = &ts->client->dev;
+	int error;
+
+	/* LEVEL_TOUCH interrupt with active low polarity */
+	error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0);
+	if (error) {
+		dev_err(dev, "Failed to set interrupt mode: %d\n", error);
+		return error;
+	}
+
+	ts->running = true;
+	mb();	/* Update status before IRQ can fire */
+
+	/* enable interrupt generation */
+	error = pixcir_int_enable(ts, true);
+	if (error) {
+		dev_err(dev, "Failed to enable interrupt generation: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int pixcir_stop(struct pixcir_i2c_ts_data *ts)
+{
+	int error;
+
+	/* Disable interrupt generation */
+	error = pixcir_int_enable(ts, false);
+	if (error) {
+		dev_err(&ts->client->dev,
+			"Failed to disable interrupt generation: %d\n",
+			error);
+		return error;
+	}
+
+	/* Exit ISR if running, no more report parsing */
+	ts->running = false;
+	mb();	/* update status before we synchronize irq */
+
+	/* Wait till running ISR is complete */
+	synchronize_irq(ts->client->irq);
+
+	return 0;
+}
+
+static int pixcir_input_open(struct input_dev *dev)
+{
+	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
+
+	return pixcir_start(ts);
+}
+
+static void pixcir_input_close(struct input_dev *dev)
+{
+	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
+
+	pixcir_stop(ts);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int pixcir_i2c_ts_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(&client->dev)) {
+		if (!input->users) {
+			ret = pixcir_start(ts);
+			if (ret) {
+				dev_err(dev, "Failed to start\n");
+				goto unlock;
+			}
+		}
 
-	if (device_may_wakeup(&client->dev))
 		enable_irq_wake(client->irq);
+	} else if (input->users) {
+		ret = pixcir_stop(ts);
+	}
 
-	return 0;
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
 }
 
 static int pixcir_i2c_ts_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
 
-	if (device_may_wakeup(&client->dev))
+	if (device_may_wakeup(&client->dev)) {
 		disable_irq_wake(client->irq);
 
-	return 0;
+		if (!input->users) {
+			ret = pixcir_stop(ts);
+			if (ret) {
+				dev_err(dev, "Failed to stop\n");
+				goto unlock;
+			}
+		}
+	} else if (input->users) {
+		ret = pixcir_start(ts);
+	}
+
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
 }
 #endif
 
@@ -128,7 +326,9 @@ static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
 static int pixcir_i2c_ts_probe(struct i2c_client *client,
 					 const struct i2c_device_id *id)
 {
-	const struct pixcir_ts_platform_data *pdata = client->dev.platform_data;
+	const struct pixcir_ts_platform_data *pdata =
+			dev_get_platdata(&client->dev);
+	struct device *dev = &client->dev;
 	struct pixcir_i2c_ts_data *tsdata;
 	struct input_dev *input;
 	int error;
@@ -138,12 +338,19 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!tsdata || !input) {
-		dev_err(&client->dev, "Failed to allocate driver data!\n");
-		error = -ENOMEM;
-		goto err_free_mem;
+	if (!gpio_is_valid(pdata->gpio_attb)) {
+		dev_err(dev, "Invalid gpio_attb in pdata\n");
+		return -EINVAL;
+	}
+
+	tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL);
+	if (!tsdata)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "Failed to allocate input device\n");
+		return -ENOMEM;
 	}
 
 	tsdata->client = client;
@@ -152,6 +359,8 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 
 	input->name = client->name;
 	input->id.bustype = BUS_I2C;
+	input->open = pixcir_input_open;
+	input->close = pixcir_input_close;
 	input->dev.parent = &client->dev;
 
 	__set_bit(EV_KEY, input->evbit);
@@ -164,44 +373,47 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 
 	input_set_drvdata(input, tsdata);
 
-	error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr,
-				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				     client->name, tsdata);
+	error = devm_gpio_request_one(dev, pdata->gpio_attb,
+				      GPIOF_DIR_IN, "pixcir_i2c_attb");
 	if (error) {
-		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
-		goto err_free_mem;
+		dev_err(dev, "Failed to request ATTB gpio\n");
+		return error;
 	}
 
+	error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
+					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					  client->name, tsdata);
+	if (error) {
+		dev_err(dev, "failed to request irq %d\n", client->irq);
+		return error;
+	}
+
+	/* Always be in IDLE mode to save power, device supports auto wake */
+	error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE);
+	if (error) {
+		dev_err(dev, "Failed to set IDLE mode\n");
+		return error;
+	}
+
+	/* Stop device till opened */
+	error = pixcir_stop(tsdata);
+	if (error)
+		return error;
+
 	error = input_register_device(input);
 	if (error)
-		goto err_free_irq;
+		return error;
 
 	i2c_set_clientdata(client, tsdata);
 	device_init_wakeup(&client->dev, 1);
 
 	return 0;
-
-err_free_irq:
-	free_irq(client->irq, tsdata);
-err_free_mem:
-	input_free_device(input);
-	kfree(tsdata);
-	return error;
 }
 
 static int pixcir_i2c_ts_remove(struct i2c_client *client)
 {
-	struct pixcir_i2c_ts_data *tsdata = i2c_get_clientdata(client);
-
 	device_init_wakeup(&client->dev, 0);
 
-	tsdata->exiting = true;
-	mb();
-	free_irq(client->irq, tsdata);
-
-	input_unregister_device(tsdata->input);
-	kfree(tsdata);
-
 	return 0;
 }