diff options
Diffstat (limited to 'drivers/input/touchscreen/Kconfig')
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 179 |
1 files changed, 136 insertions, 43 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2a2141915aa..a23a94bb4bc 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -11,6 +11,10 @@ menuconfig INPUT_TOUCHSCREEN if INPUT_TOUCHSCREEN +config OF_TOUCHSCREEN + def_tristate INPUT + depends on INPUT && OF + config TOUCHSCREEN_88PM860X tristate "Marvell 88PM860x touchscreen" depends on MFD_88PM860X @@ -89,6 +93,7 @@ config TOUCHSCREEN_AD7879_SPI config TOUCHSCREEN_ATMEL_MXT tristate "Atmel mXT I2C Touchscreen" depends on I2C + select FW_LOADER help Say Y here if you have Atmel mXT series I2C touchscreen, such as AT42QT602240/ATMXT224, connected to your system. @@ -111,18 +116,6 @@ config TOUCHSCREEN_AUO_PIXCIR To compile this driver as a module, choose M here: the module will be called auo-pixcir-ts. -config TOUCHSCREEN_BITSY - tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" - depends on SA1100_BITSY - select SERIO - help - Say Y here if you have the h3600 (Bitsy) touchscreen. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called h3600_ts_input. - config TOUCHSCREEN_BU21013 tristate "BU21013 based touch panel controllers" depends on I2C @@ -179,6 +172,36 @@ config TOUCHSCREEN_CYTTSP_SPI To compile this driver as a module, choose M here: the module will be called cyttsp_spi. +config TOUCHSCREEN_CYTTSP4_CORE + tristate "Cypress TrueTouch Gen4 Touchscreen Driver" + help + Core driver for Cypress TrueTouch(tm) Standard Product + Generation4 touchscreen controllers. + + Say Y here if you have a Cypress Gen4 touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here. + +config TOUCHSCREEN_CYTTSP4_I2C + tristate "support I2C bus connection" + depends on TOUCHSCREEN_CYTTSP4_CORE && I2C + help + Say Y here if the touchscreen is connected via I2C bus. + + To compile this driver as a module, choose M here: the + module will be called cyttsp4_i2c. + +config TOUCHSCREEN_CYTTSP4_SPI + tristate "support SPI bus connection" + depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER + help + Say Y here if the touchscreen is connected via SPI bus. + + To compile this driver as a module, choose M here: the + module will be called cyttsp4_spi. + config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X @@ -187,6 +210,23 @@ config TOUCHSCREEN_DA9034 Say Y here to enable the support for the touchscreen found on Dialog Semiconductor DA9034 PMIC. + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called da9034-ts. + +config TOUCHSCREEN_DA9052 + tristate "Dialog DA9052/DA9053 TSI" + depends on PMIC_DA9052 + help + Say Y here to support the touchscreen found on Dialog Semiconductor + DA9052-BC and DA9053-AA/Bx PMICs. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called da9052_tsi. + config TOUCHSCREEN_DYNAPRO tristate "Dynapro serial touchscreen" select SERIO @@ -222,7 +262,7 @@ config TOUCHSCREEN_EETI config TOUCHSCREEN_EGALAX tristate "EETI eGalax multi-touch panel support" - depends on I2C + depends on I2C && OF help Say Y here to enable support for I2C connected EETI eGalax multi-touch panels. @@ -306,6 +346,18 @@ config TOUCHSCREEN_WACOM_W8001 To compile this driver as a module, choose M here: the module will be called wacom_w8001. +config TOUCHSCREEN_WACOM_I2C + tristate "Wacom Tablet support (I2C)" + depends on I2C + help + Say Y here if you want to use the I2C version of the Wacom + Pen Tablet. + + If unsure, say N. + + To compile this driver as a module, choose M here: the module + will be called wacom_i2c. + config TOUCHSCREEN_LPC32XX tristate "LPC32XX touchscreen controller" depends on ARCH_LPC32XX @@ -340,6 +392,18 @@ config TOUCHSCREEN_MCS5000 To compile this driver as a module, choose M here: the module will be called mcs5000_ts. +config TOUCHSCREEN_MMS114 + tristate "MELFAS MMS114 touchscreen" + depends on I2C + help + Say Y here if you have the MELFAS MMS114 touchscreen controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mms114. + config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" select SERIO @@ -431,6 +495,19 @@ config TOUCHSCREEN_PENMOUNT To compile this driver as a module, choose M here: the module will be called penmount. +config TOUCHSCREEN_EDT_FT5X06 + tristate "EDT FocalTech FT5x06 I2C Touchscreen support" + depends on I2C + help + Say Y here if you have an EDT "Polytouch" touchscreen based + on the FocalTech FT5x06 family of controllers connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called edt-ft5x06. + config TOUCHSCREEN_MIGOR tristate "Renesas MIGO-R touchscreen" depends on SH_MIGOR && I2C @@ -442,15 +519,6 @@ config TOUCHSCREEN_MIGOR To compile this driver as a module, choose M here: the module will be called migor_ts. -config TOUCHSCREEN_TNETV107X - tristate "TI TNETV107X touchscreen support" - depends on ARCH_DAVINCI_TNETV107X - help - Say Y here if you want to use the TNETV107X touchscreen. - - To compile this driver as a module, choose M here: the - module will be called tnetv107x-ts. - config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO @@ -475,9 +543,9 @@ config TOUCHSCREEN_TOUCHWIN To compile this driver as a module, choose M here: the module will be called touchwin. -config TOUCHSCREEN_TI_TSCADC +config TOUCHSCREEN_TI_AM335X_TSC tristate "TI Touchscreen Interface" - depends on ARCH_OMAP2PLUS + depends on MFD_TI_AM335X_TSCADC help Say Y here if you have 4/5/8 wire touchscreen controller to be connected to the ADC controller on your TI AM335x SoC. @@ -485,19 +553,7 @@ config TOUCHSCREEN_TI_TSCADC If unsure, say N. To compile this driver as a module, choose M here: the - module will be called ti_tscadc. - -config TOUCHSCREEN_ATMEL_TSADCC - tristate "Atmel Touchscreen Interface" - depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 - help - Say Y here if you have a 4-wire touchscreen connected to the - ADC Controller on your Atmel SoC (such as the AT91SAM9RL). - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called atmel_tsadcc. + module will be called ti_am335x_tsc. config TOUCHSCREEN_UCB1400 tristate "Philips UCB1400 touchscreen" @@ -577,7 +633,7 @@ config TOUCHSCREEN_WM9713 config TOUCHSCREEN_WM97XX_ATMEL tristate "WM97xx Atmel accelerated touch" - depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91) + depends on TOUCHSCREEN_WM97XX && AVR32 help Say Y here for support for streaming mode with WM97xx touchscreens on Atmel AT91 or AVR32 systems with an AC97C module. @@ -635,6 +691,7 @@ config TOUCHSCREEN_USB_COMPOSITE - Zytronic controllers - Elo TouchSystems 2700 IntelliTouch - EasyTouch USB Touch Controller from Data Modul + - e2i (Mimo monitors) Have a look at <http://linux.chapter7.ch/touchkit/> for a usage description and the required user-space stuff. @@ -644,7 +701,7 @@ config TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_MC13783 tristate "Freescale MC13783 touchscreen input driver" - depends on MFD_MC13783 + depends on MFD_MC13XXX help Say Y here if you have an Freescale MC13783 PMIC on your board and want to use its touchscreen @@ -721,7 +778,7 @@ config TOUCHSCREEN_USB_ELO config TOUCHSCREEN_USB_E2I default y - bool "e2i Touchscreen controller (e.g. from Mimo 740)" + bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_ZYTRONIC @@ -744,7 +801,7 @@ config TOUCHSCREEN_USB_EASYTOUCH bool "EasyTouch USB Touch controller device support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE help - Say Y here if you have a EasyTouch USB Touch controller device support. + Say Y here if you have an EasyTouch USB Touch controller. If unsure, say N. config TOUCHSCREEN_TOUCHIT213 @@ -772,7 +829,7 @@ config TOUCHSCREEN_TSC_SERIO config TOUCHSCREEN_TSC2005 tristate "TSC2005 based touchscreens" - depends on SPI_MASTER && GENERIC_HARDIRQS + depends on SPI_MASTER help Say Y here if you have a TSC2005 based touchscreen. @@ -794,7 +851,7 @@ config TOUCHSCREEN_TSC2007 config TOUCHSCREEN_W90X900 tristate "W90P910 touchscreen driver" - depends on HAVE_CLK + depends on ARCH_W90X900 help Say Y here if you have a W90P910 based touchscreen. @@ -833,9 +890,32 @@ config TOUCHSCREEN_STMPE To compile this driver as a module, choose M here: the module will be called stmpe-ts. +config TOUCHSCREEN_SUN4I + tristate "Allwinner sun4i resistive touchscreen controller support" + depends on ARCH_SUNXI || COMPILE_TEST + depends on HWMON + help + This selects support for the resistive touchscreen controller + found on Allwinner sunxi SoCs. + + To compile this driver as a module, choose M here: the + module will be called sun4i-ts. + +config TOUCHSCREEN_SUR40 + tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen" + depends on USB + select INPUT_POLLDEV + help + Say Y here if you want support for the Samsung SUR40 touchscreen + (also known as Microsoft Surface 2.0 or Microsoft PixelSense). + + To compile this driver as a module, choose M here: the + module will be called sur40. + config TOUCHSCREEN_TPS6507X tristate "TPS6507x based touchscreens" depends on I2C + select INPUT_POLLDEV help Say Y here if you have a TPS6507x based touchscreen controller. @@ -845,4 +925,17 @@ config TOUCHSCREEN_TPS6507X To compile this driver as a module, choose M here: the module will be called tps6507x_ts. +config TOUCHSCREEN_ZFORCE + tristate "Neonode zForce infrared touchscreens" + depends on I2C + depends on GPIOLIB + help + Say Y here if you have a touchscreen using the zforce + infraread technology from Neonode. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called zforce_ts. + endif |