diff options
Diffstat (limited to 'drivers/input/mouse')
34 files changed, 7828 insertions, 1294 deletions
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 9c1e6ee8353..366fc7ad5eb 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -17,7 +17,7 @@ config MOUSE_PS2 default y select SERIO select SERIO_LIBPS2 - select SERIO_I8042 if X86 + select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO select SERIO_GSCPS2 if GSC help Say Y here if you have a PS/2 mouse connected to your system. This @@ -53,7 +53,7 @@ config MOUSE_PS2_LOGIPS2PP default y depends on MOUSE_PS2 help - Say Y here if you have a Logictech PS/2++ mouse connected to + Say Y here if you have a Logitech PS/2++ mouse connected to your system. If unsure, say Y. @@ -68,6 +68,16 @@ config MOUSE_PS2_SYNAPTICS If unsure, say Y. +config MOUSE_PS2_CYPRESS + bool "Cypress PS/2 mouse protocol extension" if EXPERT + default y + depends on MOUSE_PS2 + help + Say Y here if you have a Cypress PS/2 Trackpad connected to + your system. + + If unsure, say Y. + config MOUSE_PS2_LIFEBOOK bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EXPERT default y @@ -193,6 +203,18 @@ config MOUSE_BCM5974 To compile this driver as a module, choose M here: the module will be called bcm5974. +config MOUSE_CYAPA + tristate "Cypress APA I2C Trackpad support" + depends on I2C + help + This driver adds support for Cypress All Points Addressable (APA) + I2C Trackpads, including the ones used in 2012 Samsung Chromebooks. + + Say Y here if you have a Cypress APA I2C Trackpad. + + To compile this driver as a module, choose M here: the module will be + called cyapa. + config MOUSE_INPORT tristate "InPort/MS/ATIXL busmouse" depends on ISA @@ -273,7 +295,7 @@ config MOUSE_VSXXXAA config MOUSE_GPIO tristate "GPIO mouse" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help This driver simulates a mouse on GPIO lines of various CPUs (and some @@ -322,4 +344,33 @@ config MOUSE_SYNAPTICS_I2C To compile this driver as a module, choose M here: the module will be called synaptics_i2c. +config MOUSE_SYNAPTICS_USB + tristate "Synaptics USB device support" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use a Synaptics USB touchpad or pointing + stick. + + While these devices emulate an USB mouse by default and can be used + with standard usbhid driver, this driver, together with its X.Org + counterpart, allows you to fully utilize capabilities of the device. + More information can be found at: + <http://jan-steinhoff.de/linux/synaptics-usb.html> + + To compile this driver as a module, choose M here: the + module will be called synaptics_usb. + +config MOUSE_NAVPOINT_PXA27x + tristate "Synaptics NavPoint (PXA27x SSP/SPI)" + depends on PXA27x && PXA_SSP + help + This driver adds support for the Synaptics NavPoint touchpad connected + to a PXA27x SSP port in SPI slave mode. The device emulates a mouse; + a tap or tap-and-a-half drag gesture emulates the left mouse button. + For example, use the xf86-input-evdev driver for an X pointing device. + + To compile this driver as a module, choose M here: the + module will be called navpoint. + endif diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 570c84a4a65..c25efdb3f28 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -8,16 +8,19 @@ obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o +obj-$(CONFIG_MOUSE_CYAPA) += cyapa.o obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o obj-$(CONFIG_MOUSE_INPORT) += inport.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o +obj-$(CONFIG_MOUSE_NAVPOINT_PXA27x) += navpoint.o obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o obj-$(CONFIG_MOUSE_PS2) += psmouse.o obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o obj-$(CONFIG_MOUSE_SYNAPTICS_I2C) += synaptics_i2c.o +obj-$(CONFIG_MOUSE_SYNAPTICS_USB) += synaptics_usb.o obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o psmouse-objs := psmouse-base.o synaptics.o @@ -30,3 +33,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o +psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 99d58764ef0..fb15c64ffb9 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -17,20 +17,79 @@ #include <linux/slab.h> #include <linux/input.h> +#include <linux/input/mt.h> #include <linux/serio.h> #include <linux/libps2.h> #include "psmouse.h" #include "alps.h" -#undef DEBUG -#ifdef DEBUG -#define dbg(format, arg...) printk(KERN_INFO "alps.c: " format "\n", ## arg) -#else -#define dbg(format, arg...) do {} while (0) -#endif +/* + * Definitions for ALPS version 3 and 4 command mode protocol + */ +#define ALPS_CMD_NIBBLE_10 0x01f2 + +#define ALPS_REG_BASE_RUSHMORE 0xc2c0 +#define ALPS_REG_BASE_PINNACLE 0x0000 + +static const struct alps_nibble_commands alps_v3_nibble_commands[] = { + { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */ + { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ + { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */ + { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */ + { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */ + { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */ + { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */ + { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */ + { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */ + { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */ + { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */ + { PSMOUSE_CMD_SETRES, 0x00 }, /* b */ + { PSMOUSE_CMD_SETRES, 0x01 }, /* c */ + { PSMOUSE_CMD_SETRES, 0x02 }, /* d */ + { PSMOUSE_CMD_SETRES, 0x03 }, /* e */ + { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ +}; + +static const struct alps_nibble_commands alps_v4_nibble_commands[] = { + { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */ + { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ + { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */ + { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */ + { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */ + { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */ + { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */ + { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */ + { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */ + { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */ + { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */ + { PSMOUSE_CMD_SETRES, 0x00 }, /* b */ + { PSMOUSE_CMD_SETRES, 0x01 }, /* c */ + { PSMOUSE_CMD_SETRES, 0x02 }, /* d */ + { PSMOUSE_CMD_SETRES, 0x03 }, /* e */ + { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ +}; + +static const struct alps_nibble_commands alps_v6_nibble_commands[] = { + { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */ + { PSMOUSE_CMD_SETRATE, 0x0a }, /* 1 */ + { PSMOUSE_CMD_SETRATE, 0x14 }, /* 2 */ + { PSMOUSE_CMD_SETRATE, 0x28 }, /* 3 */ + { PSMOUSE_CMD_SETRATE, 0x3c }, /* 4 */ + { PSMOUSE_CMD_SETRATE, 0x50 }, /* 5 */ + { PSMOUSE_CMD_SETRATE, 0x64 }, /* 6 */ + { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 7 */ + { PSMOUSE_CMD_GETID, 0x00 }, /* 8 */ + { PSMOUSE_CMD_GETINFO, 0x00 }, /* 9 */ + { PSMOUSE_CMD_SETRES, 0x00 }, /* a */ + { PSMOUSE_CMD_SETRES, 0x01 }, /* b */ + { PSMOUSE_CMD_SETRES, 0x02 }, /* c */ + { PSMOUSE_CMD_SETRES, 0x03 }, /* d */ + { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* e */ + { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ +}; + -#define ALPS_OLDPROTO 0x01 /* old style input */ #define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */ #define ALPS_PASS 0x04 /* device has a pass-through port */ @@ -42,79 +101,51 @@ 6-byte ALPS packet */ static const struct alps_model_info alps_model_data[] = { - { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ - { { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */ - { { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, - { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, - { { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 }, /* HP ze1115 */ - { { 0x63, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, - { { 0x63, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, - { { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */ - { { 0x63, 0x02, 0x3c }, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */ - { { 0x63, 0x02, 0x50 }, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */ - { { 0x63, 0x02, 0x64 }, 0xf8, 0xf8, 0 }, - { { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */ - { { 0x73, 0x00, 0x0a }, 0xf8, 0xf8, ALPS_DUALPOINT }, /* ThinkPad R61 8918-5QG */ - { { 0x73, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, - { { 0x73, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */ - { { 0x20, 0x02, 0x0e }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */ - { { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, - { { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */ + { { 0x32, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ + { { 0x33, 0x02, 0x0a }, 0x00, ALPS_PROTO_V1, 0x88, 0xf8, 0 }, /* UMAX-530T */ + { { 0x53, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x53, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x60, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, /* HP ze1115 */ + { { 0x63, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x63, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x63, 0x02, 0x28 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */ + { { 0x63, 0x02, 0x3c }, 0x00, ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */ + { { 0x63, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */ + { { 0x63, 0x02, 0x64 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x63, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */ + { { 0x73, 0x00, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT }, /* ThinkPad R61 8918-5QG */ + { { 0x73, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x73, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */ + { { 0x20, 0x02, 0x0e }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */ + { { 0x22, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, + { { 0x22, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */ /* Dell Latitude E5500, E6400, E6500, Precision M4400 */ - { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, + { { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, - { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ - { { 0x52, 0x01, 0x14 }, 0xff, 0xff, - ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ + { { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT }, /* Dell XT2 */ + { { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ + { { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, + ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ + { { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 }, }; +static void alps_set_abs_params_st(struct alps_data *priv, + struct input_dev *dev1); +static void alps_set_abs_params_mt(struct alps_data *priv, + struct input_dev *dev1); + /* * XXX - this entry is suspicious. First byte has zero lower nibble, * which is what a normal mouse would report. Also, the value 0x0e * isn't valid per PS/2 spec. */ -/* - * PS/2 packet format - * - * byte 0: 0 0 YSGN XSGN 1 M R L - * byte 1: X7 X6 X5 X4 X3 X2 X1 X0 - * byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * - * Note that the device never signals overflow condition. - * - * ALPS absolute Mode - new format - * - * byte 0: 1 ? ? ? 1 ? ? ? - * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 - * byte 2: 0 x10 x9 x8 x7 ? fin ges - * byte 3: 0 y9 y8 y7 1 M R L - * byte 4: 0 y6 y5 y4 y3 y2 y1 y0 - * byte 5: 0 z6 z5 z4 z3 z2 z1 z0 - * - * Dualpoint device -- interleaved packet format - * - * byte 0: 1 1 0 0 1 1 1 1 - * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 - * byte 2: 0 x10 x9 x8 x7 0 fin ges - * byte 3: 0 0 YSGN XSGN 1 1 1 1 - * byte 4: X7 X6 X5 X4 X3 X2 X1 X0 - * byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * byte 6: 0 y9 y8 y7 1 m r l - * byte 7: 0 y6 y5 y4 y3 y2 y1 y0 - * byte 8: 0 z6 z5 z4 z3 z2 z1 z0 - * - * CAPITALS = stick, miniscules = touchpad - * - * ?'s can have different meanings on different models, - * such as wheel rotation, extra buttons, stick buttons - * on a dualpoint, etc. - */ +/* Packet formats are described in Documentation/input/alps.txt */ -static bool alps_is_valid_first_byte(const struct alps_model_info *model, +static bool alps_is_valid_first_byte(struct alps_data *priv, unsigned char data) { - return (data & model->mask0) == model->byte0; + return (data & priv->mask0) == priv->byte0; } static void alps_report_buttons(struct psmouse *psmouse, @@ -144,17 +175,16 @@ static void alps_report_buttons(struct psmouse *psmouse, input_sync(dev2); } -static void alps_process_packet(struct psmouse *psmouse) +static void alps_process_packet_v1_v2(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; - const struct alps_model_info *model = priv->i; unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; struct input_dev *dev2 = priv->dev2; int x, y, z, ges, fin, left, right, middle; int back = 0, forward = 0; - if (model->flags & ALPS_OLDPROTO) { + if (priv->proto_version == ALPS_PROTO_V1) { left = packet[2] & 0x10; right = packet[2] & 0x08; middle = 0; @@ -170,12 +200,12 @@ static void alps_process_packet(struct psmouse *psmouse) z = packet[5]; } - if (model->flags & ALPS_FW_BK_1) { + if (priv->flags & ALPS_FW_BK_1) { back = packet[0] & 0x10; forward = packet[2] & 4; } - if (model->flags & ALPS_FW_BK_2) { + if (priv->flags & ALPS_FW_BK_2) { back = packet[3] & 4; forward = packet[2] & 4; if ((middle = forward && back)) @@ -185,7 +215,7 @@ static void alps_process_packet(struct psmouse *psmouse) ges = packet[2] & 1; fin = packet[2] & 2; - if ((model->flags & ALPS_DUALPOINT) && z == 127) { + if ((priv->flags & ALPS_DUALPOINT) && z == 127) { input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x)); input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y)); @@ -228,15 +258,15 @@ static void alps_process_packet(struct psmouse *psmouse) input_report_abs(dev, ABS_PRESSURE, z); input_report_key(dev, BTN_TOOL_FINGER, z > 0); - if (model->flags & ALPS_WHEEL) + if (priv->flags & ALPS_WHEEL) input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07)); - if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { + if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { input_report_key(dev, BTN_FORWARD, forward); input_report_key(dev, BTN_BACK, back); } - if (model->flags & ALPS_FOUR_BUTTONS) { + if (priv->flags & ALPS_FOUR_BUTTONS) { input_report_key(dev, BTN_0, packet[2] & 4); input_report_key(dev, BTN_1, packet[0] & 0x10); input_report_key(dev, BTN_2, packet[3] & 4); @@ -246,6 +276,646 @@ static void alps_process_packet(struct psmouse *psmouse) input_sync(dev); } +/* + * Process bitmap data for V5 protocols. Return value is null. + * + * The bitmaps don't have enough data to track fingers, so this function + * only generates points representing a bounding box of at most two contacts. + * These two points are returned in x1, y1, x2, and y2. + */ +static void alps_process_bitmap_dolphin(struct alps_data *priv, + struct alps_fields *fields, + int *x1, int *y1, int *x2, int *y2) +{ + int box_middle_x, box_middle_y; + unsigned int x_map, y_map; + unsigned char start_bit, end_bit; + unsigned char x_msb, x_lsb, y_msb, y_lsb; + + x_map = fields->x_map; + y_map = fields->y_map; + + if (!x_map || !y_map) + return; + + /* Get Most-significant and Least-significant bit */ + x_msb = fls(x_map); + x_lsb = ffs(x_map); + y_msb = fls(y_map); + y_lsb = ffs(y_map); + + /* Most-significant bit should never exceed max sensor line number */ + if (x_msb > priv->x_bits || y_msb > priv->y_bits) + return; + + *x1 = *y1 = *x2 = *y2 = 0; + + if (fields->fingers > 1) { + start_bit = priv->x_bits - x_msb; + end_bit = priv->x_bits - x_lsb; + box_middle_x = (priv->x_max * (start_bit + end_bit)) / + (2 * (priv->x_bits - 1)); + + start_bit = y_lsb - 1; + end_bit = y_msb - 1; + box_middle_y = (priv->y_max * (start_bit + end_bit)) / + (2 * (priv->y_bits - 1)); + *x1 = fields->x; + *y1 = fields->y; + *x2 = 2 * box_middle_x - *x1; + *y2 = 2 * box_middle_y - *y1; + } +} + +/* + * Process bitmap data from v3 and v4 protocols. Returns the number of + * fingers detected. A return value of 0 means at least one of the + * bitmaps was empty. + * + * The bitmaps don't have enough data to track fingers, so this function + * only generates points representing a bounding box of all contacts. + * These points are returned in x1, y1, x2, and y2 when the return value + * is greater than 0. + */ +static int alps_process_bitmap(struct alps_data *priv, + unsigned int x_map, unsigned int y_map, + int *x1, int *y1, int *x2, int *y2) +{ + struct alps_bitmap_point { + int start_bit; + int num_bits; + }; + + int fingers_x = 0, fingers_y = 0, fingers; + int i, bit, prev_bit; + struct alps_bitmap_point x_low = {0,}, x_high = {0,}; + struct alps_bitmap_point y_low = {0,}, y_high = {0,}; + struct alps_bitmap_point *point; + + if (!x_map || !y_map) + return 0; + + *x1 = *y1 = *x2 = *y2 = 0; + + prev_bit = 0; + point = &x_low; + for (i = 0; x_map != 0; i++, x_map >>= 1) { + bit = x_map & 1; + if (bit) { + if (!prev_bit) { + point->start_bit = i; + fingers_x++; + } + point->num_bits++; + } else { + if (prev_bit) + point = &x_high; + else + point->num_bits = 0; + } + prev_bit = bit; + } + + /* + * y bitmap is reversed for what we need (lower positions are in + * higher bits), so we process from the top end. + */ + y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits); + prev_bit = 0; + point = &y_low; + for (i = 0; y_map != 0; i++, y_map <<= 1) { + bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1)); + if (bit) { + if (!prev_bit) { + point->start_bit = i; + fingers_y++; + } + point->num_bits++; + } else { + if (prev_bit) + point = &y_high; + else + point->num_bits = 0; + } + prev_bit = bit; + } + + /* + * Fingers can overlap, so we use the maximum count of fingers + * on either axis as the finger count. + */ + fingers = max(fingers_x, fingers_y); + + /* + * If total fingers is > 1 but either axis reports only a single + * contact, we have overlapping or adjacent fingers. For the + * purposes of creating a bounding box, divide the single contact + * (roughly) equally between the two points. + */ + if (fingers > 1) { + if (fingers_x == 1) { + i = x_low.num_bits / 2; + x_low.num_bits = x_low.num_bits - i; + x_high.start_bit = x_low.start_bit + i; + x_high.num_bits = max(i, 1); + } else if (fingers_y == 1) { + i = y_low.num_bits / 2; + y_low.num_bits = y_low.num_bits - i; + y_high.start_bit = y_low.start_bit + i; + y_high.num_bits = max(i, 1); + } + } + + *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / + (2 * (priv->x_bits - 1)); + *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / + (2 * (priv->y_bits - 1)); + + if (fingers > 1) { + *x2 = (priv->x_max * + (2 * x_high.start_bit + x_high.num_bits - 1)) / + (2 * (priv->x_bits - 1)); + *y2 = (priv->y_max * + (2 * y_high.start_bit + y_high.num_bits - 1)) / + (2 * (priv->y_bits - 1)); + } + + return fingers; +} + +static void alps_set_slot(struct input_dev *dev, int slot, bool active, + int x, int y) +{ + input_mt_slot(dev, slot); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); + if (active) { + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + } +} + +static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers, + int x1, int y1, int x2, int y2) +{ + alps_set_slot(dev, 0, num_fingers != 0, x1, y1); + alps_set_slot(dev, 1, num_fingers == 2, x2, y2); +} + +static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = priv->dev2; + int x, y, z, left, right, middle; + + /* Sanity check packet */ + if (!(packet[0] & 0x40)) { + psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n"); + return; + } + + /* + * There's a special packet that seems to indicate the end + * of a stream of trackstick data. Filter these out. + */ + if (packet[1] == 0x7f && packet[2] == 0x7f && packet[4] == 0x7f) + return; + + x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f)); + y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f)); + z = (packet[4] & 0x7c) >> 2; + + /* + * The x and y values tend to be quite large, and when used + * alone the trackstick is difficult to use. Scale them down + * to compensate. + */ + x /= 8; + y /= 8; + + input_report_rel(dev, REL_X, x); + input_report_rel(dev, REL_Y, -y); + + /* + * Most ALPS models report the trackstick buttons in the touchpad + * packets, but a few report them here. No reliable way has been + * found to differentiate between the models upfront, so we enable + * the quirk in response to seeing a button press in the trackstick + * packet. + */ + left = packet[3] & 0x01; + right = packet[3] & 0x02; + middle = packet[3] & 0x04; + + if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) && + (left || right || middle)) + priv->quirks |= ALPS_QUIRK_TRACKSTICK_BUTTONS; + + if (priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) { + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + input_report_key(dev, BTN_MIDDLE, middle); + } + + input_sync(dev); + return; +} + +static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p) +{ + f->left = !!(p[3] & 0x01); + f->right = !!(p[3] & 0x02); + f->middle = !!(p[3] & 0x04); + + f->ts_left = !!(p[3] & 0x10); + f->ts_right = !!(p[3] & 0x20); + f->ts_middle = !!(p[3] & 0x40); +} + +static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, + struct psmouse *psmouse) +{ + f->first_mp = !!(p[4] & 0x40); + f->is_mp = !!(p[0] & 0x40); + + f->fingers = (p[5] & 0x3) + 1; + f->x_map = ((p[4] & 0x7e) << 8) | + ((p[1] & 0x7f) << 2) | + ((p[0] & 0x30) >> 4); + f->y_map = ((p[3] & 0x70) << 4) | + ((p[2] & 0x7f) << 1) | + (p[4] & 0x01); + + f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) | + ((p[0] & 0x30) >> 4); + f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f); + f->z = p[5] & 0x7f; + + alps_decode_buttons_v3(f, p); +} + +static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p, + struct psmouse *psmouse) +{ + alps_decode_pinnacle(f, p, psmouse); + + f->x_map |= (p[5] & 0x10) << 11; + f->y_map |= (p[5] & 0x20) << 6; +} + +static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p, + struct psmouse *psmouse) +{ + u64 palm_data = 0; + struct alps_data *priv = psmouse->private; + + f->first_mp = !!(p[0] & 0x02); + f->is_mp = !!(p[0] & 0x20); + + if (!f->is_mp) { + f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); + f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); + f->z = (p[0] & 4) ? 0 : p[5] & 0x7f; + alps_decode_buttons_v3(f, p); + } else { + f->fingers = ((p[0] & 0x6) >> 1 | + (p[0] & 0x10) >> 2); + + palm_data = (p[1] & 0x7f) | + ((p[2] & 0x7f) << 7) | + ((p[4] & 0x7f) << 14) | + ((p[5] & 0x7f) << 21) | + ((p[3] & 0x07) << 28) | + (((u64)p[3] & 0x70) << 27) | + (((u64)p[0] & 0x01) << 34); + + /* Y-profile is stored in P(0) to p(n-1), n = y_bits; */ + f->y_map = palm_data & (BIT(priv->y_bits) - 1); + + /* X-profile is stored in p(n) to p(n+m-1), m = x_bits; */ + f->x_map = (palm_data >> priv->y_bits) & + (BIT(priv->x_bits) - 1); + } +} + +static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; + int x1 = 0, y1 = 0, x2 = 0, y2 = 0; + int fingers = 0, bmap_fn; + struct alps_fields f = {0}; + + priv->decode_fields(&f, packet, psmouse); + + /* + * There's no single feature of touchpad position and bitmap packets + * that can be used to distinguish between them. We rely on the fact + * that a bitmap packet should always follow a position packet with + * bit 6 of packet[4] set. + */ + if (priv->multi_packet) { + /* + * Sometimes a position packet will indicate a multi-packet + * sequence, but then what follows is another position + * packet. Check for this, and when it happens process the + * position packet as usual. + */ + if (f.is_mp) { + fingers = f.fingers; + if (priv->proto_version == ALPS_PROTO_V3) { + bmap_fn = alps_process_bitmap(priv, f.x_map, + f.y_map, &x1, &y1, + &x2, &y2); + + /* + * We shouldn't report more than one finger if + * we don't have two coordinates. + */ + if (fingers > 1 && bmap_fn < 2) + fingers = bmap_fn; + + /* Now process position packet */ + priv->decode_fields(&f, priv->multi_data, + psmouse); + } else { + /* + * Because Dolphin uses position packet's + * coordinate data as Pt1 and uses it to + * calculate Pt2, so we need to do position + * packet decode first. + */ + priv->decode_fields(&f, priv->multi_data, + psmouse); + + /* + * Since Dolphin's finger number is reliable, + * there is no need to compare with bmap_fn. + */ + alps_process_bitmap_dolphin(priv, &f, &x1, &y1, + &x2, &y2); + } + } else { + priv->multi_packet = 0; + } + } + + /* + * Bit 6 of byte 0 is not usually set in position packets. The only + * times it seems to be set is in situations where the data is + * suspect anyway, e.g. a palm resting flat on the touchpad. Given + * this combined with the fact that this bit is useful for filtering + * out misidentified bitmap packets, we reject anything with this + * bit set. + */ + if (f.is_mp) + return; + + if (!priv->multi_packet && f.first_mp) { + priv->multi_packet = 1; + memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); + return; + } + + priv->multi_packet = 0; + + /* + * Sometimes the hardware sends a single packet with z = 0 + * in the middle of a stream. Real releases generate packets + * with x, y, and z all zero, so these seem to be flukes. + * Ignore them. + */ + if (f.x && f.y && !f.z) + return; + + /* + * If we don't have MT data or the bitmaps were empty, we have + * to rely on ST data. + */ + if (!fingers) { + x1 = f.x; + y1 = f.y; + fingers = f.z > 0 ? 1 : 0; + } + + if (f.z >= 64) + input_report_key(dev, BTN_TOUCH, 1); + else + input_report_key(dev, BTN_TOUCH, 0); + + alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + + input_mt_report_finger_count(dev, fingers); + + input_report_key(dev, BTN_LEFT, f.left); + input_report_key(dev, BTN_RIGHT, f.right); + input_report_key(dev, BTN_MIDDLE, f.middle); + + if (f.z > 0) { + input_report_abs(dev, ABS_X, f.x); + input_report_abs(dev, ABS_Y, f.y); + } + input_report_abs(dev, ABS_PRESSURE, f.z); + + input_sync(dev); + + if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) { + input_report_key(dev2, BTN_LEFT, f.ts_left); + input_report_key(dev2, BTN_RIGHT, f.ts_right); + input_report_key(dev2, BTN_MIDDLE, f.ts_middle); + input_sync(dev2); + } +} + +static void alps_process_packet_v3(struct psmouse *psmouse) +{ + unsigned char *packet = psmouse->packet; + + /* + * v3 protocol packets come in three types, two representing + * touchpad data and one representing trackstick data. + * Trackstick packets seem to be distinguished by always + * having 0x3f in the last byte. This value has never been + * observed in the last byte of either of the other types + * of packets. + */ + if (packet[5] == 0x3f) { + alps_process_trackstick_packet_v3(psmouse); + return; + } + + alps_process_touchpad_packet_v3_v5(psmouse); +} + +static void alps_process_packet_v6(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; + int x, y, z, left, right, middle; + + /* + * We can use Byte5 to distinguish if the packet is from Touchpad + * or Trackpoint. + * Touchpad: 0 - 0x7E + * Trackpoint: 0x7F + */ + if (packet[5] == 0x7F) { + /* It should be a DualPoint when received Trackpoint packet */ + if (!(priv->flags & ALPS_DUALPOINT)) + return; + + /* Trackpoint packet */ + x = packet[1] | ((packet[3] & 0x20) << 2); + y = packet[2] | ((packet[3] & 0x40) << 1); + z = packet[4]; + left = packet[3] & 0x01; + right = packet[3] & 0x02; + middle = packet[3] & 0x04; + + /* To prevent the cursor jump when finger lifted */ + if (x == 0x7F && y == 0x7F && z == 0x7F) + x = y = z = 0; + + /* Divide 4 since trackpoint's speed is too fast */ + input_report_rel(dev2, REL_X, (char)x / 4); + input_report_rel(dev2, REL_Y, -((char)y / 4)); + + input_report_key(dev2, BTN_LEFT, left); + input_report_key(dev2, BTN_RIGHT, right); + input_report_key(dev2, BTN_MIDDLE, middle); + + input_sync(dev2); + return; + } + + /* Touchpad packet */ + x = packet[1] | ((packet[3] & 0x78) << 4); + y = packet[2] | ((packet[4] & 0x78) << 4); + z = packet[5]; + left = packet[3] & 0x01; + right = packet[3] & 0x02; + + if (z > 30) + input_report_key(dev, BTN_TOUCH, 1); + if (z < 25) + input_report_key(dev, BTN_TOUCH, 0); + + if (z > 0) { + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + } + + input_report_abs(dev, ABS_PRESSURE, z); + input_report_key(dev, BTN_TOOL_FINGER, z > 0); + + /* v6 touchpad does not have middle button */ + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + + input_sync(dev); +} + +static void alps_process_packet_v4(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + int offset; + int x, y, z; + int left, right; + int x1, y1, x2, y2; + int fingers = 0; + unsigned int x_bitmap, y_bitmap; + + /* + * v4 has a 6-byte encoding for bitmap data, but this data is + * broken up between 3 normal packets. Use priv->multi_packet to + * track our position in the bitmap packet. + */ + if (packet[6] & 0x40) { + /* sync, reset position */ + priv->multi_packet = 0; + } + + if (WARN_ON_ONCE(priv->multi_packet > 2)) + return; + + offset = 2 * priv->multi_packet; + priv->multi_data[offset] = packet[6]; + priv->multi_data[offset + 1] = packet[7]; + + if (++priv->multi_packet > 2) { + priv->multi_packet = 0; + + x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) | + ((priv->multi_data[3] & 0x60) << 3) | + ((priv->multi_data[0] & 0x3f) << 2) | + ((priv->multi_data[1] & 0x60) >> 5); + y_bitmap = ((priv->multi_data[5] & 0x01) << 10) | + ((priv->multi_data[3] & 0x1f) << 5) | + (priv->multi_data[1] & 0x1f); + + fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap, + &x1, &y1, &x2, &y2); + + /* Store MT data.*/ + priv->fingers = fingers; + priv->x1 = x1; + priv->x2 = x2; + priv->y1 = y1; + priv->y2 = y2; + } + + left = packet[4] & 0x01; + right = packet[4] & 0x02; + + x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) | + ((packet[0] & 0x30) >> 4); + y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); + z = packet[5] & 0x7f; + + /* + * If there were no contacts in the bitmap, use ST + * points in MT reports. + * If there were two contacts or more, report MT data. + */ + if (priv->fingers < 2) { + x1 = x; + y1 = y; + fingers = z > 0 ? 1 : 0; + } else { + fingers = priv->fingers; + x1 = priv->x1; + x2 = priv->x2; + y1 = priv->y1; + y2 = priv->y2; + } + + if (z >= 64) + input_report_key(dev, BTN_TOUCH, 1); + else + input_report_key(dev, BTN_TOUCH, 0); + + alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + + input_mt_report_finger_count(dev, fingers); + + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + + if (z > 0) { + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + } + input_report_abs(dev, ABS_PRESSURE, z); + + input_sync(dev); +} + static void alps_report_bare_ps2_packet(struct psmouse *psmouse, unsigned char packet[], bool report_buttons) @@ -296,15 +966,14 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) if (((psmouse->packet[3] | psmouse->packet[4] | psmouse->packet[5]) & 0x80) || - (!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) { - dbg("refusing packet %x %x %x %x " - "(suspected interleaved ps/2)\n", - psmouse->packet[3], psmouse->packet[4], - psmouse->packet[5], psmouse->packet[6]); + (!alps_is_valid_first_byte(priv, psmouse->packet[6]))) { + psmouse_dbg(psmouse, + "refusing packet %4ph (suspected interleaved ps/2)\n", + psmouse->packet + 3); return PSMOUSE_BAD_DATA; } - alps_process_packet(psmouse); + priv->process_packet(psmouse); /* Continue with the next packet */ psmouse->packet[0] = psmouse->packet[6]; @@ -319,13 +988,13 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) * There is also possibility that we got 6-byte ALPS * packet followed by 3-byte packet from trackpoint. We * can not distinguish between these 2 scenarios but - * becase the latter is unlikely to happen in course of + * because the latter is unlikely to happen in course of * normal operation (user would need to press all * buttons on the pad and start moving trackpoint * without touching the pad surface) we assume former. * Even if we are wrong the wost thing that would happen * the cursor would jump but we should not get protocol - * desynchronization. + * de-synchronization. */ alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3], @@ -348,10 +1017,11 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) static void alps_flush_packet(unsigned long data) { struct psmouse *psmouse = (struct psmouse *)data; + struct alps_data *priv = psmouse->private; serio_pause_rx(psmouse->ps2dev.serio); - if (psmouse->pktcnt == 6) { + if (psmouse->pktcnt == psmouse->pktsize) { /* * We did not any more data in reasonable amount of time. @@ -361,12 +1031,11 @@ static void alps_flush_packet(unsigned long data) if ((psmouse->packet[3] | psmouse->packet[4] | psmouse->packet[5]) & 0x80) { - dbg("refusing packet %x %x %x " - "(suspected interleaved ps/2)\n", - psmouse->packet[3], psmouse->packet[4], - psmouse->packet[5]); + psmouse_dbg(psmouse, + "refusing packet %3ph (suspected interleaved ps/2)\n", + psmouse->packet + 3); } else { - alps_process_packet(psmouse); + priv->process_packet(psmouse); } psmouse->pktcnt = 0; } @@ -377,7 +1046,6 @@ static void alps_flush_packet(unsigned long data) static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; - const struct alps_model_info *model = priv->i; if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */ if (psmouse->pktcnt == 3) { @@ -390,89 +1058,164 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) /* Check for PS/2 packet stuffed in the middle of ALPS packet. */ - if ((model->flags & ALPS_PS2_INTERLEAVED) && + if ((priv->flags & ALPS_PS2_INTERLEAVED) && psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) { return alps_handle_interleaved_ps2(psmouse); } - if (!alps_is_valid_first_byte(model, psmouse->packet[0])) { - dbg("refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n", - psmouse->packet[0], model->mask0, model->byte0); + if (!alps_is_valid_first_byte(priv, psmouse->packet[0])) { + psmouse_dbg(psmouse, + "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n", + psmouse->packet[0], priv->mask0, priv->byte0); return PSMOUSE_BAD_DATA; } - /* Bytes 2 - 6 should have 0 in the highest bit */ - if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 && + /* Bytes 2 - pktsize should have 0 in the highest bit */ + if ((priv->proto_version < ALPS_PROTO_V5) && + psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize && (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) { - dbg("refusing packet[%i] = %x\n", - psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]); + psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", + psmouse->pktcnt - 1, + psmouse->packet[psmouse->pktcnt - 1]); return PSMOUSE_BAD_DATA; } - if (psmouse->pktcnt == 6) { - alps_process_packet(psmouse); + if (psmouse->pktcnt == psmouse->pktsize) { + priv->process_packet(psmouse); return PSMOUSE_FULL_PACKET; } return PSMOUSE_GOOD_DATA; } -static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version) +static int alps_command_mode_send_nibble(struct psmouse *psmouse, int nibble) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + struct alps_data *priv = psmouse->private; + int command; + unsigned char *param; + unsigned char dummy[4]; + + BUG_ON(nibble > 0xf); + + command = priv->nibble_commands[nibble].command; + param = (command & 0x0f00) ? + dummy : (unsigned char *)&priv->nibble_commands[nibble].data; + + if (ps2_command(ps2dev, param, command)) + return -1; + + return 0; +} + +static int alps_command_mode_set_addr(struct psmouse *psmouse, int addr) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + struct alps_data *priv = psmouse->private; + int i, nibble; + + if (ps2_command(ps2dev, NULL, priv->addr_command)) + return -1; + + for (i = 12; i >= 0; i -= 4) { + nibble = (addr >> i) & 0xf; + if (alps_command_mode_send_nibble(psmouse, nibble)) + return -1; + } + + return 0; +} + +static int __alps_command_mode_read_reg(struct psmouse *psmouse, int addr) { struct ps2dev *ps2dev = &psmouse->ps2dev; - static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 }; unsigned char param[4]; - int i; + + if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) + return -1; /* - * First try "E6 report". - * ALPS should return 0,0,10 or 0,0,100 + * The address being read is returned in the first two bytes + * of the result. Check that this address matches the expected + * address. */ - param[0] = 0; - if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) - return NULL; + if (addr != ((param[0] << 8) | param[1])) + return -1; - param[0] = param[1] = param[2] = 0xff; - if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) - return NULL; + return param[2]; +} - dbg("E6 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]); +static int alps_command_mode_read_reg(struct psmouse *psmouse, int addr) +{ + if (alps_command_mode_set_addr(psmouse, addr)) + return -1; + return __alps_command_mode_read_reg(psmouse, addr); +} - if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100)) - return NULL; +static int __alps_command_mode_write_reg(struct psmouse *psmouse, u8 value) +{ + if (alps_command_mode_send_nibble(psmouse, (value >> 4) & 0xf)) + return -1; + if (alps_command_mode_send_nibble(psmouse, value & 0xf)) + return -1; + return 0; +} + +static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr, + u8 value) +{ + if (alps_command_mode_set_addr(psmouse, addr)) + return -1; + return __alps_command_mode_write_reg(psmouse, value); +} + +static int alps_rpt_cmd(struct psmouse *psmouse, int init_command, + int repeated_command, unsigned char *param) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; - /* - * Now try "E7 report". Allowed responses are in - * alps_model_data[].signature - */ param[0] = 0; - if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21)) - return NULL; + if (init_command && ps2_command(ps2dev, param, init_command)) + return -EIO; + + if (ps2_command(ps2dev, NULL, repeated_command) || + ps2_command(ps2dev, NULL, repeated_command) || + ps2_command(ps2dev, NULL, repeated_command)) + return -EIO; param[0] = param[1] = param[2] = 0xff; if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) - return NULL; + return -EIO; + + psmouse_dbg(psmouse, "%2.2X report: %3ph\n", + repeated_command, param); + return 0; +} - dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]); +static int alps_enter_command_mode(struct psmouse *psmouse) +{ + unsigned char param[4]; - if (version) { - for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++) - /* empty */; - *version = (param[0] << 8) | (param[1] << 4) | i; + if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_RESET_WRAP, param)) { + psmouse_err(psmouse, "failed to enter command mode\n"); + return -1; } - for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) - if (!memcmp(param, alps_model_data[i].signature, - sizeof(alps_model_data[i].signature))) - return alps_model_data + i; + if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) && + param[0] != 0x73) { + psmouse_dbg(psmouse, + "unknown response while entering command mode\n"); + return -1; + } + return 0; +} - return NULL; +static inline int alps_exit_command_mode(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) + return -1; + return 0; } /* @@ -480,7 +1223,7 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int * subsequent commands. It looks like glidepad is behind stickpointer, * I'd thought it would be other way around... */ -static int alps_passthrough_mode(struct psmouse *psmouse, bool enable) +static int alps_passthrough_mode_v2(struct psmouse *psmouse, bool enable) { struct ps2dev *ps2dev = &psmouse->ps2dev; int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11; @@ -497,7 +1240,7 @@ static int alps_passthrough_mode(struct psmouse *psmouse, bool enable) return 0; } -static int alps_absolute_mode(struct psmouse *psmouse) +static int alps_absolute_mode_v1_v2(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; @@ -516,18 +1259,85 @@ static int alps_absolute_mode(struct psmouse *psmouse) return ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETPOLL); } -static int alps_get_status(struct psmouse *psmouse, char *param) +static int alps_monitor_mode_send_word(struct psmouse *psmouse, u16 word) +{ + int i, nibble; + + /* + * b0-b11 are valid bits, send sequence is inverse. + * e.g. when word = 0x0123, nibble send sequence is 3, 2, 1 + */ + for (i = 0; i <= 8; i += 4) { + nibble = (word >> i) & 0xf; + if (alps_command_mode_send_nibble(psmouse, nibble)) + return -1; + } + + return 0; +} + +static int alps_monitor_mode_write_reg(struct psmouse *psmouse, + u16 addr, u16 value) { struct ps2dev *ps2dev = &psmouse->ps2dev; - /* Get status: 0xF5 0xF5 0xF5 0xE9 */ - if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || - ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) + /* 0x0A0 is the command to write the word */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE) || + alps_monitor_mode_send_word(psmouse, 0x0A0) || + alps_monitor_mode_send_word(psmouse, addr) || + alps_monitor_mode_send_word(psmouse, value) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) return -1; - dbg("Status: %2.2x %2.2x %2.2x", param[0], param[1], param[2]); + return 0; +} + +static int alps_monitor_mode(struct psmouse *psmouse, bool enable) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + + if (enable) { + /* EC E9 F5 F5 E7 E6 E7 E9 to enter monitor mode */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO)) + return -1; + } else { + /* EC to exit monitor mode */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP)) + return -1; + } + + return 0; +} + +static int alps_absolute_mode_v6(struct psmouse *psmouse) +{ + u16 reg_val = 0x181; + int ret = -1; + + /* enter monitor mode, to write the register */ + if (alps_monitor_mode(psmouse, true)) + return -1; + + ret = alps_monitor_mode_write_reg(psmouse, 0x000, reg_val); + + if (alps_monitor_mode(psmouse, false)) + ret = -1; + + return ret; +} + +static int alps_get_status(struct psmouse *psmouse, char *param) +{ + /* Get status: 0xF5 0xF5 0xF5 0xE9 */ + if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_DISABLE, param)) + return -1; return 0; } @@ -567,19 +1377,19 @@ static int alps_tap_mode(struct psmouse *psmouse, int enable) static int alps_poll(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; - unsigned char buf[6]; + unsigned char buf[sizeof(psmouse->packet)]; bool poll_failed; - if (priv->i->flags & ALPS_PASS) - alps_passthrough_mode(psmouse, true); + if (priv->flags & ALPS_PASS) + alps_passthrough_mode_v2(psmouse, true); poll_failed = ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0; - if (priv->i->flags & ALPS_PASS) - alps_passthrough_mode(psmouse, false); + if (priv->flags & ALPS_PASS) + alps_passthrough_mode_v2(psmouse, false); - if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0) + if (poll_failed || (buf[0] & priv->mask0) != priv->byte0) return -1; if ((psmouse->badbyte & 0xc8) == 0x08) { @@ -594,51 +1404,624 @@ static int alps_poll(struct psmouse *psmouse) return 0; } -static int alps_hw_init(struct psmouse *psmouse) +static int alps_hw_init_v1_v2(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; - const struct alps_model_info *model = priv->i; - if ((model->flags & ALPS_PASS) && - alps_passthrough_mode(psmouse, true)) { + if ((priv->flags & ALPS_PASS) && + alps_passthrough_mode_v2(psmouse, true)) { return -1; } if (alps_tap_mode(psmouse, true)) { - printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n"); + psmouse_warn(psmouse, "Failed to enable hardware tapping\n"); return -1; } - if (alps_absolute_mode(psmouse)) { - printk(KERN_ERR "alps.c: Failed to enable absolute mode\n"); + if (alps_absolute_mode_v1_v2(psmouse)) { + psmouse_err(psmouse, "Failed to enable absolute mode\n"); return -1; } - if ((model->flags & ALPS_PASS) && - alps_passthrough_mode(psmouse, false)) { + if ((priv->flags & ALPS_PASS) && + alps_passthrough_mode_v2(psmouse, false)) { return -1; } /* ALPS needs stream mode, otherwise it won't report any data */ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) { - printk(KERN_ERR "alps.c: Failed to enable stream mode\n"); + psmouse_err(psmouse, "Failed to enable stream mode\n"); return -1; } return 0; } -static int alps_reconnect(struct psmouse *psmouse) +static int alps_hw_init_v6(struct psmouse *psmouse) +{ + unsigned char param[2] = {0xC8, 0x14}; + + /* Enter passthrough mode to let trackpoint enter 6byte raw mode */ + if (alps_passthrough_mode_v2(psmouse, true)) + return -1; + + if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(&psmouse->ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || + ps2_command(&psmouse->ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) + return -1; + + if (alps_passthrough_mode_v2(psmouse, false)) + return -1; + + if (alps_absolute_mode_v6(psmouse)) { + psmouse_err(psmouse, "Failed to enable absolute mode\n"); + return -1; + } + + return 0; +} + +/* + * Enable or disable passthrough mode to the trackstick. + */ +static int alps_passthrough_mode_v3(struct psmouse *psmouse, + int reg_base, bool enable) +{ + int reg_val, ret = -1; + + if (alps_enter_command_mode(psmouse)) + return -1; + + reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008); + if (reg_val == -1) + goto error; + + if (enable) + reg_val |= 0x01; + else + reg_val &= ~0x01; + + ret = __alps_command_mode_write_reg(psmouse, reg_val); + +error: + if (alps_exit_command_mode(psmouse)) + ret = -1; + return ret; +} + +/* Must be in command mode when calling this function */ +static int alps_absolute_mode_v3(struct psmouse *psmouse) +{ + int reg_val; + + reg_val = alps_command_mode_read_reg(psmouse, 0x0004); + if (reg_val == -1) + return -1; + + reg_val |= 0x06; + if (__alps_command_mode_write_reg(psmouse, reg_val)) + return -1; + + return 0; +} + +static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base) +{ + int ret = -EIO, reg_val; + + if (alps_enter_command_mode(psmouse)) + goto error; + + reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08); + if (reg_val == -1) + goto error; + + /* bit 7: trackstick is present */ + ret = reg_val & 0x80 ? 0 : -ENODEV; + +error: + alps_exit_command_mode(psmouse); + return ret; +} + +static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + int ret = 0; + unsigned char param[4]; + + if (alps_passthrough_mode_v3(psmouse, reg_base, true)) + return -EIO; + + /* + * E7 report for the trackstick + * + * There have been reports of failures to seem to trace back + * to the above trackstick check failing. When these occur + * this E7 report fails, so when that happens we continue + * with the assumption that there isn't a trackstick after + * all. + */ + if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) { + psmouse_warn(psmouse, "trackstick E7 report failed\n"); + ret = -ENODEV; + } else { + psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param); + + /* + * Not sure what this does, but it is absolutely + * essential. Without it, the touchpad does not + * work at all and the trackstick just emits normal + * PS/2 packets. + */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + alps_command_mode_send_nibble(psmouse, 0x9) || + alps_command_mode_send_nibble(psmouse, 0x4)) { + psmouse_err(psmouse, + "Error sending magic E6 sequence\n"); + ret = -EIO; + goto error; + } + + /* + * This ensures the trackstick packets are in the format + * supported by this driver. If bit 1 isn't set the packet + * format is different. + */ + if (alps_enter_command_mode(psmouse) || + alps_command_mode_write_reg(psmouse, + reg_base + 0x08, 0x82) || + alps_exit_command_mode(psmouse)) + ret = -EIO; + } + +error: + if (alps_passthrough_mode_v3(psmouse, reg_base, false)) + ret = -EIO; + + return ret; +} + +static int alps_hw_init_v3(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + int reg_val; + unsigned char param[4]; + + reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE); + if (reg_val == -EIO) + goto error; + + if (reg_val == 0 && + alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) + goto error; + + if (alps_enter_command_mode(psmouse) || + alps_absolute_mode_v3(psmouse)) { + psmouse_err(psmouse, "Failed to enter absolute mode\n"); + goto error; + } + + reg_val = alps_command_mode_read_reg(psmouse, 0x0006); + if (reg_val == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01)) + goto error; + + reg_val = alps_command_mode_read_reg(psmouse, 0x0007); + if (reg_val == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01)) + goto error; + + if (alps_command_mode_read_reg(psmouse, 0x0144) == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, 0x04)) + goto error; + + if (alps_command_mode_read_reg(psmouse, 0x0159) == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, 0x03)) + goto error; + + if (alps_command_mode_read_reg(psmouse, 0x0163) == -1) + goto error; + if (alps_command_mode_write_reg(psmouse, 0x0163, 0x03)) + goto error; + + if (alps_command_mode_read_reg(psmouse, 0x0162) == -1) + goto error; + if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04)) + goto error; + + alps_exit_command_mode(psmouse); + + /* Set rate and enable data reporting */ + param[0] = 0x64; + if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { + psmouse_err(psmouse, "Failed to enable data reporting\n"); + return -1; + } + + return 0; + +error: + /* + * Leaving the touchpad in command mode will essentially render + * it unusable until the machine reboots, so exit it here just + * to be safe + */ + alps_exit_command_mode(psmouse); + return -1; +} + +static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + struct ps2dev *ps2dev = &psmouse->ps2dev; + int reg_val, ret = -1; + + if (priv->flags & ALPS_DUALPOINT) { + reg_val = alps_setup_trackstick_v3(psmouse, + ALPS_REG_BASE_RUSHMORE); + if (reg_val == -EIO) + goto error; + if (reg_val == -ENODEV) + priv->flags &= ~ALPS_DUALPOINT; + } + + if (alps_enter_command_mode(psmouse) || + alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 || + alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) + goto error; + + reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6); + if (reg_val == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, reg_val & 0xfd)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64)) + goto error; + + /* enter absolute mode */ + reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4); + if (reg_val == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02)) + goto error; + + alps_exit_command_mode(psmouse); + return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); + +error: + alps_exit_command_mode(psmouse); + return ret; +} + +/* Must be in command mode when calling this function */ +static int alps_absolute_mode_v4(struct psmouse *psmouse) +{ + int reg_val; + + reg_val = alps_command_mode_read_reg(psmouse, 0x0004); + if (reg_val == -1) + return -1; + + reg_val |= 0x02; + if (__alps_command_mode_write_reg(psmouse, reg_val)) + return -1; + + return 0; +} + +static int alps_hw_init_v4(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[4]; + + if (alps_enter_command_mode(psmouse)) + goto error; + + if (alps_absolute_mode_v4(psmouse)) { + psmouse_err(psmouse, "Failed to enter absolute mode\n"); + goto error; + } + + if (alps_command_mode_write_reg(psmouse, 0x0007, 0x8c)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0149, 0x03)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0160, 0x03)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x017f, 0x15)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0151, 0x01)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0168, 0x03)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x014a, 0x03)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0161, 0x03)) + goto error; + + alps_exit_command_mode(psmouse); + + /* + * This sequence changes the output from a 9-byte to an + * 8-byte format. All the same data seems to be present, + * just in a more compact format. + */ + param[0] = 0xc8; + param[1] = 0x64; + param[2] = 0x50; + if (ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, ¶m[2], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) + return -1; + + /* Set rate and enable data reporting */ + param[0] = 0x64; + if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { + psmouse_err(psmouse, "Failed to enable data reporting\n"); + return -1; + } + + return 0; + +error: + /* + * Leaving the touchpad in command mode will essentially render + * it unusable until the machine reboots, so exit it here just + * to be safe + */ + alps_exit_command_mode(psmouse); + return -1; +} + +static int alps_dolphin_get_device_area(struct psmouse *psmouse, + struct alps_data *priv) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[4] = {0}; + int num_x_electrode, num_y_electrode; + + if (alps_enter_command_mode(psmouse)) + return -1; + + param[0] = 0x0a; + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || + ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE)) + return -1; + + if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) + return -1; + + /* + * Dolphin's sensor line number is not fixed. It can be calculated + * by adding the device's register value with DOLPHIN_PROFILE_X/YOFFSET. + * Further more, we can get device's x_max and y_max by multiplying + * sensor line number with DOLPHIN_COUNT_PER_ELECTRODE. + * + * e.g. When we get register's sensor_x = 11 & sensor_y = 8, + * real sensor line number X = 11 + 8 = 19, and + * real sensor line number Y = 8 + 1 = 9. + * So, x_max = (19 - 1) * 64 = 1152, and + * y_max = (9 - 1) * 64 = 512. + */ + num_x_electrode = DOLPHIN_PROFILE_XOFFSET + (param[2] & 0x0F); + num_y_electrode = DOLPHIN_PROFILE_YOFFSET + ((param[2] >> 4) & 0x0F); + priv->x_bits = num_x_electrode; + priv->y_bits = num_y_electrode; + priv->x_max = (num_x_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE; + priv->y_max = (num_y_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE; + + if (alps_exit_command_mode(psmouse)) + return -1; + + return 0; +} + +static int alps_hw_init_dolphin_v1(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[2]; + + /* This is dolphin "v1" as empirically defined by florin9doi */ + param[0] = 0x64; + param[1] = 0x28; + + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || + ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) + return -1; + + return 0; +} + +static void alps_set_defaults(struct alps_data *priv) +{ + priv->byte0 = 0x8f; + priv->mask0 = 0x8f; + priv->flags = ALPS_DUALPOINT; + + priv->x_max = 2000; + priv->y_max = 1400; + priv->x_bits = 15; + priv->y_bits = 11; + + switch (priv->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: + priv->hw_init = alps_hw_init_v1_v2; + priv->process_packet = alps_process_packet_v1_v2; + priv->set_abs_params = alps_set_abs_params_st; + priv->x_max = 1023; + priv->y_max = 767; + break; + case ALPS_PROTO_V3: + priv->hw_init = alps_hw_init_v3; + priv->process_packet = alps_process_packet_v3; + priv->set_abs_params = alps_set_abs_params_mt; + priv->decode_fields = alps_decode_pinnacle; + priv->nibble_commands = alps_v3_nibble_commands; + priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + break; + case ALPS_PROTO_V4: + priv->hw_init = alps_hw_init_v4; + priv->process_packet = alps_process_packet_v4; + priv->set_abs_params = alps_set_abs_params_mt; + priv->nibble_commands = alps_v4_nibble_commands; + priv->addr_command = PSMOUSE_CMD_DISABLE; + break; + case ALPS_PROTO_V5: + priv->hw_init = alps_hw_init_dolphin_v1; + priv->process_packet = alps_process_touchpad_packet_v3_v5; + priv->decode_fields = alps_decode_dolphin; + priv->set_abs_params = alps_set_abs_params_mt; + priv->nibble_commands = alps_v3_nibble_commands; + priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + priv->byte0 = 0xc8; + priv->mask0 = 0xd8; + priv->flags = 0; + priv->x_max = 1360; + priv->y_max = 660; + priv->x_bits = 23; + priv->y_bits = 12; + break; + case ALPS_PROTO_V6: + priv->hw_init = alps_hw_init_v6; + priv->process_packet = alps_process_packet_v6; + priv->set_abs_params = alps_set_abs_params_st; + priv->nibble_commands = alps_v6_nibble_commands; + priv->x_max = 2047; + priv->y_max = 1535; + break; + } +} + +static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv, + unsigned char *e7, unsigned char *ec) { const struct alps_model_info *model; + int i; + + for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { + model = &alps_model_data[i]; + + if (!memcmp(e7, model->signature, sizeof(model->signature)) && + (!model->command_mode_resp || + model->command_mode_resp == ec[2])) { + + priv->proto_version = model->proto_version; + alps_set_defaults(priv); + + priv->flags = model->flags; + priv->byte0 = model->byte0; + priv->mask0 = model->mask0; + + return 0; + } + } + + return -EINVAL; +} + +static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) +{ + unsigned char e6[4], e7[4], ec[4]; + + /* + * First try "E6 report". + * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed. + * The bits 0-2 of the first byte will be 1s if some buttons are + * pressed. + */ + if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, + PSMOUSE_CMD_SETSCALE11, e6)) + return -EIO; + + if ((e6[0] & 0xf8) != 0 || e6[1] != 0 || (e6[2] != 10 && e6[2] != 100)) + return -EINVAL; + + /* + * Now get the "E7" and "EC" reports. These will uniquely identify + * most ALPS touchpads. + */ + if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, + PSMOUSE_CMD_SETSCALE21, e7) || + alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, + PSMOUSE_CMD_RESET_WRAP, ec) || + alps_exit_command_mode(psmouse)) + return -EIO; + + if (alps_match_table(psmouse, priv, e7, ec) == 0) { + return 0; + } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && + ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) { + priv->proto_version = ALPS_PROTO_V5; + alps_set_defaults(priv); + if (alps_dolphin_get_device_area(psmouse, priv)) + return -EIO; + else + return 0; + } else if (ec[0] == 0x88 && ec[1] == 0x08) { + priv->proto_version = ALPS_PROTO_V3; + alps_set_defaults(priv); + + priv->hw_init = alps_hw_init_rushmore_v3; + priv->decode_fields = alps_decode_rushmore; + priv->x_bits = 16; + priv->y_bits = 12; + + /* hack to make addr_command, nibble_command available */ + psmouse->private = priv; + + if (alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_RUSHMORE)) + priv->flags &= ~ALPS_DUALPOINT; + + return 0; + } else if (ec[0] == 0x88 && ec[1] == 0x07 && + ec[2] >= 0x90 && ec[2] <= 0x9d) { + priv->proto_version = ALPS_PROTO_V3; + alps_set_defaults(priv); + + return 0; + } + + psmouse_info(psmouse, + "Unknown ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec); + + return -EINVAL; +} + +static int alps_reconnect(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; psmouse_reset(psmouse); - model = alps_get_model(psmouse, NULL); - if (!model) + if (alps_identify(psmouse, priv) < 0) return -1; - return alps_hw_init(psmouse); + return priv->hw_init(psmouse); } static void alps_disconnect(struct psmouse *psmouse) @@ -651,12 +2034,33 @@ static void alps_disconnect(struct psmouse *psmouse) kfree(priv); } +static void alps_set_abs_params_st(struct alps_data *priv, + struct input_dev *dev1) +{ + input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0); + input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0); +} + +static void alps_set_abs_params_mt(struct alps_data *priv, + struct input_dev *dev1) +{ + set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); + input_mt_init_slots(dev1, 2, 0); + input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); + input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); + + set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); + set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); + set_bit(BTN_TOOL_QUADTAP, dev1->keybit); + + input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0); + input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0); +} + int alps_init(struct psmouse *psmouse) { struct alps_data *priv; - const struct alps_model_info *model; struct input_dev *dev1 = psmouse->dev, *dev2; - int version; priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL); dev2 = input_allocate_device(); @@ -668,13 +2072,12 @@ int alps_init(struct psmouse *psmouse) psmouse->private = priv; - model = alps_get_model(psmouse, &version); - if (!model) - goto init_fail; + psmouse_reset(psmouse); - priv->i = model; + if (alps_identify(psmouse, priv) < 0) + goto init_fail; - if (alps_hw_init(psmouse)) + if (priv->hw_init(psmouse)) goto init_fail; /* @@ -695,21 +2098,21 @@ int alps_init(struct psmouse *psmouse) BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); - input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); - input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); + + priv->set_abs_params(priv, dev1); input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); - if (model->flags & ALPS_WHEEL) { + if (priv->flags & ALPS_WHEEL) { dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL); dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL); } - if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { + if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD); dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK); } - if (model->flags & ALPS_FOUR_BUTTONS) { + if (priv->flags & ALPS_FOUR_BUTTONS) { dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0); dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1); dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2); @@ -720,7 +2123,8 @@ int alps_init(struct psmouse *psmouse) snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys); dev2->phys = priv->phys; - dev2->name = (model->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse"; + dev2->name = (priv->flags & ALPS_DUALPOINT) ? + "DualPoint Stick" : "ALPS PS/2 Device"; dev2->id.bustype = BUS_I8042; dev2->id.vendor = 0x0002; dev2->id.product = PSMOUSE_ALPS; @@ -739,7 +2143,7 @@ int alps_init(struct psmouse *psmouse) psmouse->poll = alps_poll; psmouse->disconnect = alps_disconnect; psmouse->reconnect = alps_reconnect; - psmouse->pktsize = 6; + psmouse->pktsize = priv->proto_version == ALPS_PROTO_V4 ? 8 : 6; /* We are having trouble resyncing ALPS touchpads so disable it for now */ psmouse->resync_time = 0; @@ -756,18 +2160,16 @@ init_fail: int alps_detect(struct psmouse *psmouse, bool set_properties) { - int version; - const struct alps_model_info *model; + struct alps_data dummy; - model = alps_get_model(psmouse, &version); - if (!model) + if (alps_identify(psmouse, &dummy) < 0) return -1; if (set_properties) { psmouse->vendor = "ALPS"; - psmouse->name = model->flags & ALPS_DUALPOINT ? + psmouse->name = dummy.flags & ALPS_DUALPOINT ? "DualPoint TouchPad" : "GlidePoint"; - psmouse->model = version; + psmouse->model = dummy.proto_version << 8; } return 0; } diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 904ed8b3c8b..03f88b6940c 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -12,20 +12,159 @@ #ifndef _ALPS_H #define _ALPS_H +#define ALPS_PROTO_V1 1 +#define ALPS_PROTO_V2 2 +#define ALPS_PROTO_V3 3 +#define ALPS_PROTO_V4 4 +#define ALPS_PROTO_V5 5 +#define ALPS_PROTO_V6 6 + +#define DOLPHIN_COUNT_PER_ELECTRODE 64 +#define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */ +#define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */ + +/** + * struct alps_model_info - touchpad ID table + * @signature: E7 response string to match. + * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response + * (aka command mode response) identifies the firmware minor version. This + * can be used to distinguish different hardware models which are not + * uniquely identifiable through their E7 responses. + * @proto_version: Indicates V1/V2/V3/... + * @byte0: Helps figure out whether a position report packet matches the + * known format for this model. The first byte of the report, ANDed with + * mask0, should match byte0. + * @mask0: The mask used to check the first byte of the report. + * @flags: Additional device capabilities (passthrough port, trackstick, etc.). + * + * Many (but not all) ALPS touchpads can be identified by looking at the + * values returned in the "E7 report" and/or the "EC report." This table + * lists a number of such touchpads. + */ struct alps_model_info { - unsigned char signature[3]; - unsigned char byte0, mask0; - unsigned char flags; + unsigned char signature[3]; + unsigned char command_mode_resp; + unsigned char proto_version; + unsigned char byte0, mask0; + unsigned char flags; +}; + +/** + * struct alps_nibble_commands - encodings for register accesses + * @command: PS/2 command used for the nibble + * @data: Data supplied as an argument to the PS/2 command, if applicable + * + * The ALPS protocol uses magic sequences to transmit binary data to the + * touchpad, as it is generally not OK to send arbitrary bytes out the + * PS/2 port. Each of the sequences in this table sends one nibble of the + * register address or (write) data. Different versions of the ALPS protocol + * use slightly different encodings. + */ +struct alps_nibble_commands { + int command; + unsigned char data; +}; + +/** + * struct alps_fields - decoded version of the report packet + * @x_map: Bitmap of active X positions for MT. + * @y_map: Bitmap of active Y positions for MT. + * @fingers: Number of fingers for MT. + * @x: X position for ST. + * @y: Y position for ST. + * @z: Z position for ST. + * @first_mp: Packet is the first of a multi-packet report. + * @is_mp: Packet is part of a multi-packet report. + * @left: Left touchpad button is active. + * @right: Right touchpad button is active. + * @middle: Middle touchpad button is active. + * @ts_left: Left trackstick button is active. + * @ts_right: Right trackstick button is active. + * @ts_middle: Middle trackstick button is active. + */ +struct alps_fields { + unsigned int x_map; + unsigned int y_map; + unsigned int fingers; + unsigned int x; + unsigned int y; + unsigned int z; + unsigned int first_mp:1; + unsigned int is_mp:1; + + unsigned int left:1; + unsigned int right:1; + unsigned int middle:1; + + unsigned int ts_left:1; + unsigned int ts_right:1; + unsigned int ts_middle:1; }; +/** + * struct alps_data - private data structure for the ALPS driver + * @dev2: "Relative" device used to report trackstick or mouse activity. + * @phys: Physical path for the relative device. + * @nibble_commands: Command mapping used for touchpad register accesses. + * @addr_command: Command used to tell the touchpad that a register address + * follows. + * @proto_version: Indicates V1/V2/V3/... + * @byte0: Helps figure out whether a position report packet matches the + * known format for this model. The first byte of the report, ANDed with + * mask0, should match byte0. + * @mask0: The mask used to check the first byte of the report. + * @flags: Additional device capabilities (passthrough port, trackstick, etc.). + * @x_max: Largest possible X position value. + * @y_max: Largest possible Y position value. + * @x_bits: Number of X bits in the MT bitmap. + * @y_bits: Number of Y bits in the MT bitmap. + * @hw_init: Protocol-specific hardware init function. + * @process_packet: Protocol-specific function to process a report packet. + * @decode_fields: Protocol-specific function to read packet bitfields. + * @set_abs_params: Protocol-specific function to configure the input_dev. + * @prev_fin: Finger bit from previous packet. + * @multi_packet: Multi-packet data in progress. + * @multi_data: Saved multi-packet data. + * @x1: First X coordinate from last MT report. + * @x2: Second X coordinate from last MT report. + * @y1: First Y coordinate from last MT report. + * @y2: Second Y coordinate from last MT report. + * @fingers: Number of fingers from last MT report. + * @quirks: Bitmap of ALPS_QUIRK_*. + * @timer: Timer for flushing out the final report packet in the stream. + */ struct alps_data { - struct input_dev *dev2; /* Relative device */ - char phys[32]; /* Phys */ - const struct alps_model_info *i;/* Info */ - int prev_fin; /* Finger bit from previous packet */ + struct input_dev *dev2; + char phys[32]; + + /* these are autodetected when the device is identified */ + const struct alps_nibble_commands *nibble_commands; + int addr_command; + unsigned char proto_version; + unsigned char byte0, mask0; + unsigned char flags; + int x_max; + int y_max; + int x_bits; + int y_bits; + + int (*hw_init)(struct psmouse *psmouse); + void (*process_packet)(struct psmouse *psmouse); + void (*decode_fields)(struct alps_fields *f, unsigned char *p, + struct psmouse *psmouse); + void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); + + int prev_fin; + int multi_packet; + unsigned char multi_data[6]; + int x1, x2, y1, y2; + int fingers; + u8 quirks; struct timer_list timer; }; +#define ALPS_QUIRK_TRACKSTICK_BUTTONS 1 /* trakcstick buttons in trackstick packet */ + #ifdef CONFIG_MOUSE_PS2_ALPS int alps_detect(struct psmouse *psmouse, bool set_properties); int alps_init(struct psmouse *psmouse); diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c index ff5f61a0fd3..62ec52b2e34 100644 --- a/drivers/input/mouse/amimouse.c +++ b/drivers/input/mouse/amimouse.c @@ -25,7 +25,6 @@ #include <asm/irq.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <asm/amigahw.h> #include <asm/amigaints.h> @@ -134,7 +133,6 @@ static int __exit amimouse_remove(struct platform_device *pdev) { struct input_dev *dev = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); input_unregister_device(dev); return 0; } @@ -147,18 +145,6 @@ static struct platform_driver amimouse_driver = { }, }; -static int __init amimouse_init(void) -{ - return platform_driver_probe(&amimouse_driver, amimouse_probe); -} - -module_init(amimouse_init); - -static void __exit amimouse_exit(void) -{ - platform_driver_unregister(&amimouse_driver); -} - -module_exit(amimouse_exit); +module_platform_driver_probe(amimouse_driver, amimouse_probe); MODULE_ALIAS("platform:amiga-mouse"); diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index b77f9991278..ef234c9b2f2 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -30,7 +30,6 @@ #include <linux/kernel.h> #include <linux/errno.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/usb/input.h> @@ -49,6 +48,7 @@ struct atp_info { int yfact; /* Y multiplication factor */ int datalen; /* size of USB transfers */ void (*callback)(struct urb *); /* callback function */ + int fuzz; /* fuzz touchpad generates */ }; static void atp_complete_geyser_1_2(struct urb *urb); @@ -62,6 +62,7 @@ static const struct atp_info fountain_info = { .yfact = 43, .datalen = 81, .callback = atp_complete_geyser_1_2, + .fuzz = 16, }; static const struct atp_info geyser1_info = { @@ -72,6 +73,7 @@ static const struct atp_info geyser1_info = { .yfact = 43, .datalen = 81, .callback = atp_complete_geyser_1_2, + .fuzz = 16, }; static const struct atp_info geyser2_info = { @@ -82,6 +84,7 @@ static const struct atp_info geyser2_info = { .yfact = 43, .datalen = 64, .callback = atp_complete_geyser_1_2, + .fuzz = 0, }; static const struct atp_info geyser3_info = { @@ -91,6 +94,7 @@ static const struct atp_info geyser3_info = { .yfact = 64, .datalen = 64, .callback = atp_complete_geyser_3_4, + .fuzz = 0, }; static const struct atp_info geyser4_info = { @@ -100,6 +104,7 @@ static const struct atp_info geyser4_info = { .yfact = 64, .datalen = 64, .callback = atp_complete_geyser_3_4, + .fuzz = 0, }; #define ATP_DEVICE(prod, info) \ @@ -156,8 +161,11 @@ MODULE_DEVICE_TABLE(usb, atp_table); #define ATP_XSENSORS 26 #define ATP_YSENSORS 16 -/* amount of fuzz this touchpad generates */ -#define ATP_FUZZ 16 +/* + * The largest possible bank of sensors with additional buffer of 4 extra values + * on either side, for an array of smoothed sensor values. + */ +#define ATP_SMOOTHSIZE 34 /* maximum pressure this driver will report */ #define ATP_PRESSURE 300 @@ -166,7 +174,13 @@ MODULE_DEVICE_TABLE(usb, atp_table); * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is * ignored. */ -#define ATP_THRESHOLD 5 +#define ATP_THRESHOLD 5 + +/* + * How far we'll bitshift our sensor values before averaging them. Mitigates + * rounding errors. + */ +#define ATP_SCALE 12 /* Geyser initialization constants */ #define ATP_GEYSER_MODE_READ_REQUEST_ID 1 @@ -195,6 +209,7 @@ enum atp_status_bits { struct atp { char phys[64]; struct usb_device *udev; /* usb device */ + struct usb_interface *intf; /* usb interface */ struct urb *urb; /* usb request block */ u8 *data; /* transferred data */ struct input_dev *input; /* input dev */ @@ -203,11 +218,14 @@ struct atp { bool valid; /* are the samples valid? */ bool size_detect_done; bool overflow_warned; + int fingers_old; /* last reported finger count */ int x_old; /* last reported x/y, */ int y_old; /* used for smoothing */ signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS]; signed char xy_old[ATP_XSENSORS + ATP_YSENSORS]; int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; + int smooth[ATP_SMOOTHSIZE]; + int smooth_tmp[ATP_SMOOTHSIZE]; int idlecount; /* number of empty packets */ struct work_struct work; }; @@ -253,8 +271,9 @@ MODULE_PARM_DESC(debug, "Activate debugging output"); * packets (Report ID 2). This code changes device mode, so it * sends raw sensor reports (Report ID 5). */ -static int atp_geyser_init(struct usb_device *udev) +static int atp_geyser_init(struct atp *dev) { + struct usb_device *udev = dev->udev; char *data; int size; int i; @@ -262,7 +281,7 @@ static int atp_geyser_init(struct usb_device *udev) data = kmalloc(8, GFP_KERNEL); if (!data) { - err("Out of memory"); + dev_err(&dev->intf->dev, "Out of memory\n"); return -ENOMEM; } @@ -277,7 +296,7 @@ static int atp_geyser_init(struct usb_device *udev) for (i = 0; i < 8; i++) dprintk("appletouch[%d]: %d\n", i, data[i]); - err("Failed to read mode from device."); + dev_err(&dev->intf->dev, "Failed to read mode from device.\n"); ret = -EIO; goto out_free; } @@ -296,7 +315,7 @@ static int atp_geyser_init(struct usb_device *udev) for (i = 0; i < 8; i++) dprintk("appletouch[%d]: %d\n", i, data[i]); - err("Failed to request geyser raw mode"); + dev_err(&dev->intf->dev, "Failed to request geyser raw mode\n"); ret = -EIO; goto out_free; } @@ -313,22 +332,29 @@ out_free: static void atp_reinit(struct work_struct *work) { struct atp *dev = container_of(work, struct atp, work); - struct usb_device *udev = dev->udev; int retval; dprintk("appletouch: putting appletouch to sleep (reinit)\n"); - atp_geyser_init(udev); + atp_geyser_init(dev); retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - err("atp_reinit: usb_submit_urb failed with error %d", - retval); + dev_err(&dev->intf->dev, + "atp_reinit: usb_submit_urb failed with error %d\n", + retval); } -static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, - int *z, int *fingers) +static int atp_calculate_abs(struct atp *dev, int offset, int nb_sensors, + int fact, int *z, int *fingers) { - int i; + int i, pass; + + /* + * Use offset to point xy_sensors at the first value in dev->xy_acc + * for whichever dimension we're looking at this particular go-round. + */ + int *xy_sensors = dev->xy_acc + offset; + /* values to calculate mean */ int pcum = 0, psum = 0; int is_increasing = 0; @@ -340,9 +366,6 @@ static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, if (is_increasing) is_increasing = 0; - continue; - } - /* * Makes the finger detection more versatile. For example, * two fingers with no gap will be detected. Also, my @@ -357,27 +380,63 @@ static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, * * - Jason Parekh <jasonparekh@gmail.com> */ - if (i < 1 || + + } else if (i < 1 || (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) { (*fingers)++; is_increasing = 1; } else if (i > 0 && (xy_sensors[i - 1] - xy_sensors[i] > threshold)) { is_increasing = 0; } + } + + if (*fingers < 1) /* No need to continue if no fingers are found. */ + return 0; + + /* + * Use a smoothed version of sensor data for movement calculations, to + * combat noise without needing to rely so heavily on a threshold. + * This improves tracking. + * + * The smoothed array is bigger than the original so that the smoothing + * doesn't result in edge values being truncated. + */ + + memset(dev->smooth, 0, 4 * sizeof(dev->smooth[0])); + /* Pull base values, scaled up to help avoid truncation errors. */ + for (i = 0; i < nb_sensors; i++) + dev->smooth[i + 4] = xy_sensors[i] << ATP_SCALE; + memset(&dev->smooth[nb_sensors + 4], 0, 4 * sizeof(dev->smooth[0])); + for (pass = 0; pass < 4; pass++) { + /* Handle edge. */ + dev->smooth_tmp[0] = (dev->smooth[0] + dev->smooth[1]) / 2; + + /* Average values with neighbors. */ + for (i = 1; i < nb_sensors + 7; i++) + dev->smooth_tmp[i] = (dev->smooth[i - 1] + + dev->smooth[i] * 2 + + dev->smooth[i + 1]) / 4; + + /* Handle other edge. */ + dev->smooth_tmp[i] = (dev->smooth[i - 1] + dev->smooth[i]) / 2; + + memcpy(dev->smooth, dev->smooth_tmp, sizeof(dev->smooth)); + } + + for (i = 0; i < nb_sensors + 8; i++) { /* - * Subtracts threshold so a high sensor that just passes the - * threshold won't skew the calculated absolute coordinate. - * Fixes an issue where slowly moving the mouse would - * occasionally jump a number of pixels (slowly moving the - * finger makes this issue most apparent.) + * Skip values if they're small enough to be truncated to 0 + * by scale. Mostly noise. */ - pcum += (xy_sensors[i] - threshold) * i; - psum += (xy_sensors[i] - threshold); + if ((dev->smooth[i] >> ATP_SCALE) > 0) { + pcum += dev->smooth[i] * i; + psum += dev->smooth[i]; + } } if (psum > 0) { - *z = psum; + *z = psum >> ATP_SCALE; /* Scale down pressure output. */ return pcum * fact / psum; } @@ -400,6 +459,7 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers) static int atp_status_check(struct urb *urb) { struct atp *dev = urb->context; + struct usb_interface *intf = dev->intf; switch (urb->status) { case 0: @@ -407,8 +467,8 @@ static int atp_status_check(struct urb *urb) break; case -EOVERFLOW: if (!dev->overflow_warned) { - printk(KERN_WARNING "appletouch: OVERFLOW with data " - "length %d, actual length is %d\n", + dev_warn(&intf->dev, + "appletouch: OVERFLOW with data length %d, actual length is %d\n", dev->info->datalen, dev->urb->actual_length); dev->overflow_warned = true; } @@ -416,13 +476,15 @@ static int atp_status_check(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* This urb is terminated, clean up */ - dbg("atp_complete: urb shutting down with status: %d", - urb->status); + dev_dbg(&intf->dev, + "atp_complete: urb shutting down with status: %d\n", + urb->status); return ATP_URB_STATUS_ERROR_FATAL; default: - dbg("atp_complete: nonzero urb status received: %d", - urb->status); + dev_dbg(&intf->dev, + "atp_complete: nonzero urb status received: %d\n", + urb->status); return ATP_URB_STATUS_ERROR; } @@ -445,12 +507,13 @@ static void atp_detect_size(struct atp *dev) for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) { if (dev->xy_cur[i]) { - printk(KERN_INFO "appletouch: 17\" model detected.\n"); + dev_info(&dev->intf->dev, + "appletouch: 17\" model detected.\n"); input_set_abs_params(dev->input, ABS_X, 0, (dev->info->xsensors_17 - 1) * dev->info->xfact - 1, - ATP_FUZZ, 0); + dev->info->fuzz, 0); break; } } @@ -466,7 +529,7 @@ static void atp_complete_geyser_1_2(struct urb *urb) { int x, y, x_z, y_z, x_f, y_f; int retval, i, j; - int key; + int key, fingers; struct atp *dev = urb->context; int status = atp_status_check(urb); @@ -543,16 +606,18 @@ static void atp_complete_geyser_1_2(struct urb *urb) dbg_dump("accumulator", dev->xy_acc); - x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS, + x = atp_calculate_abs(dev, 0, ATP_XSENSORS, dev->info->xfact, &x_z, &x_f); - y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, + y = atp_calculate_abs(dev, ATP_XSENSORS, ATP_YSENSORS, dev->info->yfact, &y_z, &y_f); key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON; - if (x && y) { + fingers = max(x_f, y_f); + + if (x && y && fingers == dev->fingers_old) { if (dev->x_old != -1) { - x = (dev->x_old * 3 + x) >> 2; - y = (dev->y_old * 3 + y) >> 2; + x = (dev->x_old * 7 + x) >> 3; + y = (dev->y_old * 7 + y) >> 3; dev->x_old = x; dev->y_old = y; @@ -566,7 +631,7 @@ static void atp_complete_geyser_1_2(struct urb *urb) input_report_abs(dev->input, ABS_Y, y); input_report_abs(dev->input, ABS_PRESSURE, min(ATP_PRESSURE, x_z + y_z)); - atp_report_fingers(dev->input, max(x_f, y_f)); + atp_report_fingers(dev->input, fingers); } dev->x_old = x; dev->y_old = y; @@ -574,6 +639,7 @@ static void atp_complete_geyser_1_2(struct urb *urb) } else if (!x && !y) { dev->x_old = dev->y_old = -1; + dev->fingers_old = 0; input_report_key(dev->input, BTN_TOUCH, 0); input_report_abs(dev->input, ABS_PRESSURE, 0); atp_report_fingers(dev->input, 0); @@ -582,14 +648,19 @@ static void atp_complete_geyser_1_2(struct urb *urb) memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); } + if (fingers != dev->fingers_old) + dev->x_old = dev->y_old = -1; + dev->fingers_old = fingers; + input_report_key(dev->input, BTN_LEFT, key); input_sync(dev->input); exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - err("atp_complete: usb_submit_urb failed with result %d", - retval); + dev_err(&dev->intf->dev, + "atp_complete: usb_submit_urb failed with result %d\n", + retval); } /* Interrupt function for older touchpads: GEYSER3/GEYSER4 */ @@ -598,7 +669,7 @@ static void atp_complete_geyser_3_4(struct urb *urb) { int x, y, x_z, y_z, x_f, y_f; int retval, i, j; - int key; + int key, fingers; struct atp *dev = urb->context; int status = atp_status_check(urb); @@ -654,16 +725,19 @@ static void atp_complete_geyser_3_4(struct urb *urb) dbg_dump("accumulator", dev->xy_acc); - x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS, + x = atp_calculate_abs(dev, 0, ATP_XSENSORS, dev->info->xfact, &x_z, &x_f); - y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, + y = atp_calculate_abs(dev, ATP_XSENSORS, ATP_YSENSORS, dev->info->yfact, &y_z, &y_f); + key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON; - if (x && y) { + fingers = max(x_f, y_f); + + if (x && y && fingers == dev->fingers_old) { if (dev->x_old != -1) { - x = (dev->x_old * 3 + x) >> 2; - y = (dev->y_old * 3 + y) >> 2; + x = (dev->x_old * 7 + x) >> 3; + y = (dev->y_old * 7 + y) >> 3; dev->x_old = x; dev->y_old = y; @@ -677,7 +751,7 @@ static void atp_complete_geyser_3_4(struct urb *urb) input_report_abs(dev->input, ABS_Y, y); input_report_abs(dev->input, ABS_PRESSURE, min(ATP_PRESSURE, x_z + y_z)); - atp_report_fingers(dev->input, max(x_f, y_f)); + atp_report_fingers(dev->input, fingers); } dev->x_old = x; dev->y_old = y; @@ -685,6 +759,7 @@ static void atp_complete_geyser_3_4(struct urb *urb) } else if (!x && !y) { dev->x_old = dev->y_old = -1; + dev->fingers_old = 0; input_report_key(dev->input, BTN_TOUCH, 0); input_report_abs(dev->input, ABS_PRESSURE, 0); atp_report_fingers(dev->input, 0); @@ -693,6 +768,10 @@ static void atp_complete_geyser_3_4(struct urb *urb) memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); } + if (fingers != dev->fingers_old) + dev->x_old = dev->y_old = -1; + dev->fingers_old = fingers; + input_report_key(dev->input, BTN_LEFT, key); input_sync(dev->input); @@ -722,8 +801,9 @@ static void atp_complete_geyser_3_4(struct urb *urb) exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - err("atp_complete: usb_submit_urb failed with result %d", - retval); + dev_err(&dev->intf->dev, + "atp_complete: usb_submit_urb failed with result %d\n", + retval); } static int atp_open(struct input_dev *input) @@ -748,14 +828,12 @@ static void atp_close(struct input_dev *input) static int atp_handle_geyser(struct atp *dev) { - struct usb_device *udev = dev->udev; - if (dev->info != &fountain_info) { /* switch to raw sensor mode */ - if (atp_geyser_init(udev)) + if (atp_geyser_init(dev)) return -EIO; - printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); + dev_info(&dev->intf->dev, "Geyser mode initialized.\n"); } return 0; @@ -785,7 +863,7 @@ static int atp_probe(struct usb_interface *iface, } } if (!int_in_endpointAddr) { - err("Could not find int-in endpoint"); + dev_err(&iface->dev, "Could not find int-in endpoint\n"); return -EIO; } @@ -793,11 +871,12 @@ static int atp_probe(struct usb_interface *iface, dev = kzalloc(sizeof(struct atp), GFP_KERNEL); input_dev = input_allocate_device(); if (!dev || !input_dev) { - err("Out of memory"); + dev_err(&iface->dev, "Out of memory\n"); goto err_free_devs; } dev->udev = udev; + dev->intf = iface; dev->input = input_dev; dev->info = info; dev->overflow_warned = false; @@ -837,10 +916,10 @@ static int atp_probe(struct usb_interface *iface, input_set_abs_params(input_dev, ABS_X, 0, (dev->info->xsensors - 1) * dev->info->xfact - 1, - ATP_FUZZ, 0); + dev->info->fuzz, 0); input_set_abs_params(input_dev, ABS_Y, 0, (dev->info->ysensors - 1) * dev->info->yfact - 1, - ATP_FUZZ, 0); + dev->info->fuzz, 0); input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); set_bit(EV_KEY, input_dev->evbit); @@ -886,7 +965,7 @@ static void atp_disconnect(struct usb_interface *iface) usb_free_urb(dev->urb); kfree(dev); } - printk(KERN_INFO "input: appletouch disconnected\n"); + dev_info(&iface->dev, "input: appletouch disconnected\n"); } static int atp_recover(struct atp *dev) @@ -938,15 +1017,4 @@ static struct usb_driver atp_driver = { .id_table = atp_table, }; -static int __init atp_init(void) -{ - return usb_register(&atp_driver); -} - -static void __exit atp_exit(void) -{ - usb_deregister(&atp_driver); -} - -module_init(atp_init); -module_exit(atp_exit); +module_usb_driver(atp_driver); diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c index adf45b3040e..d1c43236b12 100644 --- a/drivers/input/mouse/atarimouse.c +++ b/drivers/input/mouse/atarimouse.c @@ -47,7 +47,6 @@ #include <asm/irq.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <asm/atarihw.h> #include <asm/atarikb.h> @@ -77,15 +76,15 @@ static void atamouse_interrupt(char *buf) #endif /* only relative events get here */ - dx = buf[1]; - dy = -buf[2]; + dx = buf[1]; + dy = buf[2]; input_report_rel(atamouse_dev, REL_X, dx); input_report_rel(atamouse_dev, REL_Y, dy); - input_report_key(atamouse_dev, BTN_LEFT, buttons & 0x1); + input_report_key(atamouse_dev, BTN_LEFT, buttons & 0x4); input_report_key(atamouse_dev, BTN_MIDDLE, buttons & 0x2); - input_report_key(atamouse_dev, BTN_RIGHT, buttons & 0x4); + input_report_key(atamouse_dev, BTN_RIGHT, buttons & 0x1); input_sync(atamouse_dev); @@ -108,7 +107,7 @@ static int atamouse_open(struct input_dev *dev) static void atamouse_close(struct input_dev *dev) { ikbd_mouse_disable(); - atari_mouse_interrupt_hook = NULL; + atari_input_mouse_interrupt_hook = NULL; } static int __init atamouse_init(void) @@ -118,8 +117,9 @@ static int __init atamouse_init(void) if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP)) return -ENODEV; - if (!atari_keyb_init()) - return -ENODEV; + error = atari_keyb_init(); + if (error) + return error; atamouse_dev = input_allocate_device(); if (!atamouse_dev) diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index ee82851afe3..c329cdb0b91 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -34,12 +34,12 @@ #include <linux/kernel.h> #include <linux/errno.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/usb/input.h> #include <linux/hid.h> #include <linux/mutex.h> +#include <linux/input/mt.h> #define USB_VENDOR_ID_APPLE 0x05ac @@ -63,6 +63,34 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242 #define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243 #define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244 +/* Macbook8 (unibody, March 2011) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245 +#define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246 +#define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247 +/* MacbookAir4,1 (unibody, July 2011) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249 +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b +/* MacbookAir4,2 (unibody, July 2011) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c +#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d +#define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e +/* Macbook8,2 (unibody) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252 +#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253 +#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254 +/* MacbookPro10,1 (unibody, June 2012) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262 +#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263 +#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264 +/* MacbookPro10,2 (unibody, October 2012) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b +/* MacbookAir6,2 (unibody, June 2013) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI 0x0290 +#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO 0x0291 +#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS 0x0292 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -96,6 +124,34 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS), + /* MacbookPro8 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS), + /* MacbookAir4,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS), + /* MacbookAir4,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_JIS), + /* MacbookPro8,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS), + /* MacbookPro10,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), + /* MacbookPro10,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS), + /* MacbookAir6,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_JIS), /* Terminating entry */ {} }; @@ -123,15 +179,18 @@ struct bt_data { /* trackpad header types */ enum tp_type { TYPE1, /* plain trackpad */ - TYPE2 /* button integrated in trackpad */ + TYPE2, /* button integrated in trackpad */ + TYPE3 /* additional header fields since June 2013 */ }; /* trackpad finger data offsets, le16-aligned */ #define FINGER_TYPE1 (13 * sizeof(__le16)) #define FINGER_TYPE2 (15 * sizeof(__le16)) +#define FINGER_TYPE3 (19 * sizeof(__le16)) /* trackpad button data offsets */ #define BUTTON_TYPE2 15 +#define BUTTON_TYPE3 23 /* list of device capability bits */ #define HAS_INTEGRATED_BUTTON 1 @@ -143,26 +202,26 @@ struct tp_finger { __le16 abs_y; /* absolute y coodinate */ __le16 rel_x; /* relative x coodinate */ __le16 rel_y; /* relative y coodinate */ - __le16 size_major; /* finger size, major axis? */ - __le16 size_minor; /* finger size, minor axis? */ + __le16 tool_major; /* tool area, major axis */ + __le16 tool_minor; /* tool area, minor axis */ __le16 orientation; /* 16384 when point, else 15 bit angle */ - __le16 force_major; /* trackpad force, major axis? */ - __le16 force_minor; /* trackpad force, minor axis? */ + __le16 touch_major; /* touch area, major axis */ + __le16 touch_minor; /* touch area, minor axis */ __le16 unused[3]; /* zeros */ __le16 multi; /* one finger: varies, more fingers: constant */ } __attribute__((packed,aligned(2))); /* trackpad finger data size, empirically at least ten fingers */ +#define MAX_FINGERS 16 #define SIZEOF_FINGER sizeof(struct tp_finger) -#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER) +#define SIZEOF_ALL_FINGERS (MAX_FINGERS * SIZEOF_FINGER) #define MAX_FINGER_ORIENTATION 16384 /* device-specific parameters */ struct bcm5974_param { - int dim; /* logical dimension */ - int fuzz; /* logical noise value */ - int devmin; /* device minimum reading */ - int devmax; /* device maximum reading */ + int snratio; /* signal-to-noise ratio */ + int min; /* device minimum reading */ + int max; /* device maximum reading */ }; /* device-specific configuration */ @@ -179,6 +238,7 @@ struct bcm5974_config { struct bcm5974_param w; /* finger width limits */ struct bcm5974_param x; /* horizontal limits */ struct bcm5974_param y; /* vertical limits */ + struct bcm5974_param o; /* orientation limits */ }; /* logical device structure */ @@ -194,23 +254,16 @@ struct bcm5974 { struct bt_data *bt_data; /* button transferred data */ struct urb *tp_urb; /* trackpad usb request block */ u8 *tp_data; /* trackpad transferred data */ - int fingers; /* number of fingers on trackpad */ + const struct tp_finger *index[MAX_FINGERS]; /* finger index data */ + struct input_mt_pos pos[MAX_FINGERS]; /* position array */ + int slots[MAX_FINGERS]; /* slot assignments */ }; -/* logical dimensions */ -#define DIM_PRESSURE 256 /* maximum finger pressure */ -#define DIM_WIDTH 16 /* maximum finger width */ -#define DIM_X 1280 /* maximum trackpad x value */ -#define DIM_Y 800 /* maximum trackpad y value */ - /* logical signal quality */ #define SN_PRESSURE 45 /* pressure signal-to-noise ratio */ -#define SN_WIDTH 100 /* width signal-to-noise ratio */ +#define SN_WIDTH 25 /* width signal-to-noise ratio */ #define SN_COORD 250 /* coordinate signal-to-noise ratio */ - -/* pressure thresholds */ -#define PRESSURE_LOW (2 * DIM_PRESSURE / SN_PRESSURE) -#define PRESSURE_HIGH (3 * PRESSURE_LOW) +#define SN_ORIENT 10 /* orientation signal-to-noise ratio */ /* device constants */ static const struct bcm5974_config bcm5974_config_table[] = { @@ -221,10 +274,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { 0, 0x84, sizeof(struct bt_data), 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4824, 5342 }, - { DIM_Y, DIM_Y / SN_COORD, -172, 5820 } + { SN_PRESSURE, 0, 256 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4824, 5342 }, + { SN_COORD, -172, 5820 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, @@ -233,10 +287,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { 0, 0x84, sizeof(struct bt_data), 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4824, 4824 }, - { DIM_Y, DIM_Y / SN_COORD, -172, 4290 } + { SN_PRESSURE, 0, 256 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4824, 4824 }, + { SN_COORD, -172, 4290 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI, @@ -245,10 +300,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, - { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4460, 5166 }, + { SN_COORD, -75, 6700 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI, @@ -257,10 +313,11 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, - { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4620, 5140 }, + { SN_COORD, -150, 6600 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, { USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI, @@ -269,10 +326,102 @@ static const struct bcm5974_config bcm5974_config_table[] = { HAS_INTEGRATED_BUTTON, 0x84, sizeof(struct bt_data), 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, - { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, - { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, - { DIM_X, DIM_X / SN_COORD, -4616, 5112 }, - { DIM_Y, DIM_Y / SN_COORD, -142, 5234 } + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4616, 5112 }, + { SN_COORD, -142, 5234 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING5_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING5_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4415, 5050 }, + { SN_COORD, -55, 6680 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING6_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING6_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4620, 5140 }, + { SN_COORD, -150, 6600 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4750, 5280 }, + { SN_COORD, -150, 6730 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4620, 5140 }, + { SN_COORD, -150, 6600 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING7_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING7_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4750, 5280 }, + { SN_COORD, -150, 6730 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4750, 5280 }, + { SN_COORD, -150, 6730 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING8_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING8_JIS, + HAS_INTEGRATED_BUTTON, + 0, sizeof(struct bt_data), + 0x83, TYPE3, FINGER_TYPE3, FINGER_TYPE3 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4620, 5140 }, + { SN_COORD, -150, 6600 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, {} }; @@ -296,18 +445,11 @@ static inline int raw2int(__le16 x) return (signed short)le16_to_cpu(x); } -/* scale device data to logical dimensions (asserts devmin < devmax) */ -static inline int int2scale(const struct bcm5974_param *p, int x) -{ - return x * p->dim / (p->devmax - p->devmin); -} - -/* all logical value ranges are [0,dim). */ -static inline int int2bound(const struct bcm5974_param *p, int x) +static void set_abs(struct input_dev *input, unsigned int code, + const struct bcm5974_param *p) { - int s = int2scale(p, x); - - return clamp_val(s, 0, p->dim - 1); + int fuzz = p->snratio ? (p->max - p->min) / p->snratio : 0; + input_set_abs_params(input, code, p->min, p->max, fuzz, 0); } /* setup which logical events to report */ @@ -316,44 +458,30 @@ static void setup_events_to_report(struct input_dev *input_dev, { __set_bit(EV_ABS, input_dev->evbit); - input_set_abs_params(input_dev, ABS_PRESSURE, - 0, cfg->p.dim, cfg->p.fuzz, 0); - input_set_abs_params(input_dev, ABS_TOOL_WIDTH, - 0, cfg->w.dim, cfg->w.fuzz, 0); - input_set_abs_params(input_dev, ABS_X, - 0, cfg->x.dim, cfg->x.fuzz, 0); - input_set_abs_params(input_dev, ABS_Y, - 0, cfg->y.dim, cfg->y.fuzz, 0); + /* for synaptics only */ + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 256, 5, 0); + input_set_abs_params(input_dev, ABS_TOOL_WIDTH, 0, 16, 0, 0); /* finger touch area */ - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, - cfg->w.devmin, cfg->w.devmax, 0, 0); - input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, - cfg->w.devmin, cfg->w.devmax, 0, 0); + set_abs(input_dev, ABS_MT_TOUCH_MAJOR, &cfg->w); + set_abs(input_dev, ABS_MT_TOUCH_MINOR, &cfg->w); /* finger approach area */ - input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, - cfg->w.devmin, cfg->w.devmax, 0, 0); - input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, - cfg->w.devmin, cfg->w.devmax, 0, 0); + set_abs(input_dev, ABS_MT_WIDTH_MAJOR, &cfg->w); + set_abs(input_dev, ABS_MT_WIDTH_MINOR, &cfg->w); /* finger orientation */ - input_set_abs_params(input_dev, ABS_MT_ORIENTATION, - -MAX_FINGER_ORIENTATION, - MAX_FINGER_ORIENTATION, 0, 0); + set_abs(input_dev, ABS_MT_ORIENTATION, &cfg->o); /* finger position */ - input_set_abs_params(input_dev, ABS_MT_POSITION_X, - cfg->x.devmin, cfg->x.devmax, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, - cfg->y.devmin, cfg->y.devmax, 0, 0); + set_abs(input_dev, ABS_MT_POSITION_X, &cfg->x); + set_abs(input_dev, ABS_MT_POSITION_Y, &cfg->y); __set_bit(EV_KEY, input_dev->evbit); - __set_bit(BTN_TOUCH, input_dev->keybit); - __set_bit(BTN_TOOL_FINGER, input_dev->keybit); - __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); - __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); - __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); - input_set_events_per_packet(input_dev, 60); + if (cfg->caps & HAS_INTEGRATED_BUTTON) + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); + + input_mt_init_slots(input_dev, MAX_FINGERS, + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK); } /* report button data as logical button state */ @@ -373,24 +501,44 @@ static int report_bt_state(struct bcm5974 *dev, int size) return 0; } -static void report_finger_data(struct input_dev *input, - const struct bcm5974_config *cfg, +static void report_finger_data(struct input_dev *input, int slot, + const struct input_mt_pos *pos, const struct tp_finger *f) { + input_mt_slot(input, slot); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, - raw2int(f->force_major) << 1); + raw2int(f->touch_major) << 1); input_report_abs(input, ABS_MT_TOUCH_MINOR, - raw2int(f->force_minor) << 1); + raw2int(f->touch_minor) << 1); input_report_abs(input, ABS_MT_WIDTH_MAJOR, - raw2int(f->size_major) << 1); + raw2int(f->tool_major) << 1); input_report_abs(input, ABS_MT_WIDTH_MINOR, - raw2int(f->size_minor) << 1); + raw2int(f->tool_minor) << 1); input_report_abs(input, ABS_MT_ORIENTATION, MAX_FINGER_ORIENTATION - raw2int(f->orientation)); - input_report_abs(input, ABS_MT_POSITION_X, raw2int(f->abs_x)); - input_report_abs(input, ABS_MT_POSITION_Y, - cfg->y.devmin + cfg->y.devmax - raw2int(f->abs_y)); - input_mt_sync(input); + input_report_abs(input, ABS_MT_POSITION_X, pos->x); + input_report_abs(input, ABS_MT_POSITION_Y, pos->y); +} + +static void report_synaptics_data(struct input_dev *input, + const struct bcm5974_config *cfg, + const struct tp_finger *f, int raw_n) +{ + int abs_p = 0, abs_w = 0; + + if (raw_n) { + int p = raw2int(f->touch_major); + int w = raw2int(f->tool_major); + if (p > 0 && raw2int(f->origin)) { + abs_p = clamp_val(256 * p / cfg->p.max, 0, 255); + abs_w = clamp_val(16 * w / cfg->w.max, 0, 15); + } + } + + input_report_abs(input, ABS_PRESSURE, abs_p); + input_report_abs(input, ABS_TOOL_WIDTH, abs_w); } /* report trackpad data as logical trackpad state */ @@ -399,9 +547,7 @@ static int report_tp_state(struct bcm5974 *dev, int size) const struct bcm5974_config *c = &dev->cfg; const struct tp_finger *f; struct input_dev *input = dev->input; - int raw_p, raw_w, raw_x, raw_y, raw_n, i; - int ptest, origin, ibt = 0, nmin = 0, nmax = 0; - int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; + int raw_n, i, n = 0; if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0) return -EIO; @@ -410,76 +556,32 @@ static int report_tp_state(struct bcm5974 *dev, int size) f = (const struct tp_finger *)(dev->tp_data + c->tp_offset); raw_n = (size - c->tp_offset) / SIZEOF_FINGER; - /* always track the first finger; when detached, start over */ - if (raw_n) { - - /* report raw trackpad data */ - for (i = 0; i < raw_n; i++) - report_finger_data(input, c, &f[i]); - - raw_p = raw2int(f->force_major); - raw_w = raw2int(f->size_major); - raw_x = raw2int(f->abs_x); - raw_y = raw2int(f->abs_y); - - dprintk(9, - "bcm5974: " - "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n", - raw_p, raw_w, raw_x, raw_y, raw_n); - - ptest = int2bound(&c->p, raw_p); - origin = raw2int(f->origin); - - /* set the integrated button if applicable */ - if (c->tp_type == TYPE2) - ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); - - /* while tracking finger still valid, count all fingers */ - if (ptest > PRESSURE_LOW && origin) { - abs_p = ptest; - abs_w = int2bound(&c->w, raw_w); - abs_x = int2bound(&c->x, raw_x - c->x.devmin); - abs_y = int2bound(&c->y, c->y.devmax - raw_y); - while (raw_n--) { - ptest = int2bound(&c->p, - raw2int(f->force_major)); - if (ptest > PRESSURE_LOW) - nmax++; - if (ptest > PRESSURE_HIGH) - nmin++; - f++; - } - } + for (i = 0; i < raw_n; i++) { + if (raw2int(f[i].touch_major) == 0) + continue; + dev->pos[n].x = raw2int(f[i].abs_x); + dev->pos[n].y = c->y.min + c->y.max - raw2int(f[i].abs_y); + dev->index[n++] = &f[i]; } - if (dev->fingers < nmin) - dev->fingers = nmin; - if (dev->fingers > nmax) - dev->fingers = nmax; + input_mt_assign_slots(input, dev->slots, dev->pos, n); - input_report_key(input, BTN_TOUCH, dev->fingers > 0); - input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1); - input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2); - input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3); - input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3); + for (i = 0; i < n; i++) + report_finger_data(input, dev->slots[i], + &dev->pos[i], dev->index[i]); - input_report_abs(input, ABS_PRESSURE, abs_p); - input_report_abs(input, ABS_TOOL_WIDTH, abs_w); + input_mt_sync_frame(input); - if (abs_p) { - input_report_abs(input, ABS_X, abs_x); - input_report_abs(input, ABS_Y, abs_y); - - dprintk(8, - "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d " - "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w, - abs_x, abs_y, nmin, nmax, dev->fingers, ibt); - - } + report_synaptics_data(input, c, f, raw_n); /* type 2 reports button events via ibt only */ - if (c->tp_type == TYPE2) + if (c->tp_type == TYPE2) { + int ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); input_report_key(input, BTN_LEFT, ibt); + } + + if (c->tp_type == TYPE3) + input_report_key(input, BTN_LEFT, dev->tp_data[BUTTON_TYPE3]); input_sync(input); @@ -496,11 +598,16 @@ static int report_tp_state(struct bcm5974 *dev, int size) static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) { - char *data = kmalloc(8, GFP_KERNEL); int retval = 0, size; + char *data; + /* Type 3 does not require a mode switch */ + if (dev->cfg.tp_type == TYPE3) + return 0; + + data = kmalloc(8, GFP_KERNEL); if (!data) { - err("bcm5974: out of memory"); + dev_err(&dev->intf->dev, "out of memory\n"); retval = -ENOMEM; goto out; } @@ -513,7 +620,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { - err("bcm5974: could not read from device"); + dev_err(&dev->intf->dev, "could not read from device\n"); retval = -EIO; goto out; } @@ -531,7 +638,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { - err("bcm5974: could not write to device"); + dev_err(&dev->intf->dev, "could not write to device\n"); retval = -EIO; goto out; } @@ -547,6 +654,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) static void bcm5974_irq_button(struct urb *urb) { struct bcm5974 *dev = urb->context; + struct usb_interface *intf = dev->intf; int error; switch (urb->status) { @@ -556,10 +664,11 @@ static void bcm5974_irq_button(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("bcm5974: button urb shutting down: %d", urb->status); + dev_dbg(&intf->dev, "button urb shutting down: %d\n", + urb->status); return; default: - dbg("bcm5974: button urb status: %d", urb->status); + dev_dbg(&intf->dev, "button urb status: %d\n", urb->status); goto exit; } @@ -570,12 +679,13 @@ static void bcm5974_irq_button(struct urb *urb) exit: error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC); if (error) - err("bcm5974: button urb failed: %d", error); + dev_err(&intf->dev, "button urb failed: %d\n", error); } static void bcm5974_irq_trackpad(struct urb *urb) { struct bcm5974 *dev = urb->context; + struct usb_interface *intf = dev->intf; int error; switch (urb->status) { @@ -585,10 +695,11 @@ static void bcm5974_irq_trackpad(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("bcm5974: trackpad urb shutting down: %d", urb->status); + dev_dbg(&intf->dev, "trackpad urb shutting down: %d\n", + urb->status); return; default: - dbg("bcm5974: trackpad urb status: %d", urb->status); + dev_dbg(&intf->dev, "trackpad urb status: %d\n", urb->status); goto exit; } @@ -603,7 +714,7 @@ static void bcm5974_irq_trackpad(struct urb *urb) exit: error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC); if (error) - err("bcm5974: trackpad urb failed: %d", error); + dev_err(&intf->dev, "trackpad urb failed: %d\n", error); } /* @@ -619,7 +730,7 @@ exit: * device, resulting in trackpad malfunction under certain * circumstances. To get around this problem, there is at least one * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to - * recieve a reset_resume request rather than the normal resume. + * receive a reset_resume request rather than the normal resume. * Since the implementation of reset_resume is equal to mode switch * plus start_traffic, it seems easier to always do the switch when * starting traffic on the device. @@ -634,9 +745,11 @@ static int bcm5974_start_traffic(struct bcm5974 *dev) goto err_out; } - error = usb_submit_urb(dev->bt_urb, GFP_KERNEL); - if (error) - goto err_reset_mode; + if (dev->bt_urb) { + error = usb_submit_urb(dev->bt_urb, GFP_KERNEL); + if (error) + goto err_reset_mode; + } error = usb_submit_urb(dev->tp_urb, GFP_KERNEL); if (error) @@ -749,7 +862,7 @@ static int bcm5974_probe(struct usb_interface *iface, dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL); input_dev = input_allocate_device(); if (!dev || !input_dev) { - err("bcm5974: out of memory"); + dev_err(&iface->dev, "out of memory\n"); goto err_free_devs; } @@ -760,19 +873,23 @@ static int bcm5974_probe(struct usb_interface *iface, mutex_init(&dev->pm_mutex); /* setup urbs */ - dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->bt_urb) - goto err_free_devs; + if (cfg->tp_type == TYPE1) { + dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->bt_urb) + goto err_free_devs; + } dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->tp_urb) goto err_free_bt_urb; - dev->bt_data = usb_alloc_coherent(dev->udev, + if (dev->bt_urb) { + dev->bt_data = usb_alloc_coherent(dev->udev, dev->cfg.bt_datalen, GFP_KERNEL, &dev->bt_urb->transfer_dma); - if (!dev->bt_data) - goto err_free_urb; + if (!dev->bt_data) + goto err_free_urb; + } dev->tp_data = usb_alloc_coherent(dev->udev, dev->cfg.tp_datalen, GFP_KERNEL, @@ -780,10 +897,11 @@ static int bcm5974_probe(struct usb_interface *iface, if (!dev->tp_data) goto err_free_bt_buffer; - usb_fill_int_urb(dev->bt_urb, udev, - usb_rcvintpipe(udev, cfg->bt_ep), - dev->bt_data, dev->cfg.bt_datalen, - bcm5974_irq_button, dev, 1); + if (dev->bt_urb) + usb_fill_int_urb(dev->bt_urb, udev, + usb_rcvintpipe(udev, cfg->bt_ep), + dev->bt_data, dev->cfg.bt_datalen, + bcm5974_irq_button, dev, 1); usb_fill_int_urb(dev->tp_urb, udev, usb_rcvintpipe(udev, cfg->tp_ep), @@ -821,8 +939,9 @@ err_free_buffer: usb_free_coherent(dev->udev, dev->cfg.tp_datalen, dev->tp_data, dev->tp_urb->transfer_dma); err_free_bt_buffer: - usb_free_coherent(dev->udev, dev->cfg.bt_datalen, - dev->bt_data, dev->bt_urb->transfer_dma); + if (dev->bt_urb) + usb_free_coherent(dev->udev, dev->cfg.bt_datalen, + dev->bt_data, dev->bt_urb->transfer_dma); err_free_urb: usb_free_urb(dev->tp_urb); err_free_bt_urb: @@ -843,8 +962,9 @@ static void bcm5974_disconnect(struct usb_interface *iface) input_unregister_device(dev->input); usb_free_coherent(dev->udev, dev->cfg.tp_datalen, dev->tp_data, dev->tp_urb->transfer_dma); - usb_free_coherent(dev->udev, dev->cfg.bt_datalen, - dev->bt_data, dev->bt_urb->transfer_dma); + if (dev->bt_urb) + usb_free_coherent(dev->udev, dev->cfg.bt_datalen, + dev->bt_data, dev->bt_urb->transfer_dma); usb_free_urb(dev->tp_urb); usb_free_urb(dev->bt_urb); kfree(dev); @@ -860,16 +980,4 @@ static struct usb_driver bcm5974_driver = { .supports_autosuspend = 1, }; -static int __init bcm5974_init(void) -{ - return usb_register(&bcm5974_driver); -} - -static void __exit bcm5974_exit(void) -{ - usb_deregister(&bcm5974_driver); -} - -module_init(bcm5974_init); -module_exit(bcm5974_exit); - +module_usb_driver(bcm5974_driver); diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c new file mode 100644 index 00000000000..b409c3d7d4f --- /dev/null +++ b/drivers/input/mouse/cyapa.c @@ -0,0 +1,973 @@ +/* + * Cypress APA trackpad with I2C interface + * + * Author: Dudley Du <dudl@cypress.com> + * Further cleanup and restructuring by: + * Daniel Kurtz <djkurtz@chromium.org> + * Benson Leung <bleung@chromium.org> + * + * Copyright (C) 2011-2012 Cypress Semiconductor, Inc. + * Copyright (C) 2011-2012 Google, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> + +/* APA trackpad firmware generation */ +#define CYAPA_GEN3 0x03 /* support MT-protocol B with tracking ID. */ + +#define CYAPA_NAME "Cypress APA Trackpad (cyapa)" + +/* commands for read/write registers of Cypress trackpad */ +#define CYAPA_CMD_SOFT_RESET 0x00 +#define CYAPA_CMD_POWER_MODE 0x01 +#define CYAPA_CMD_DEV_STATUS 0x02 +#define CYAPA_CMD_GROUP_DATA 0x03 +#define CYAPA_CMD_GROUP_CMD 0x04 +#define CYAPA_CMD_GROUP_QUERY 0x05 +#define CYAPA_CMD_BL_STATUS 0x06 +#define CYAPA_CMD_BL_HEAD 0x07 +#define CYAPA_CMD_BL_CMD 0x08 +#define CYAPA_CMD_BL_DATA 0x09 +#define CYAPA_CMD_BL_ALL 0x0a +#define CYAPA_CMD_BLK_PRODUCT_ID 0x0b +#define CYAPA_CMD_BLK_HEAD 0x0c + +/* report data start reg offset address. */ +#define DATA_REG_START_OFFSET 0x0000 + +#define BL_HEAD_OFFSET 0x00 +#define BL_DATA_OFFSET 0x10 + +/* + * Operational Device Status Register + * + * bit 7: Valid interrupt source + * bit 6 - 4: Reserved + * bit 3 - 2: Power status + * bit 1 - 0: Device status + */ +#define REG_OP_STATUS 0x00 +#define OP_STATUS_SRC 0x80 +#define OP_STATUS_POWER 0x0c +#define OP_STATUS_DEV 0x03 +#define OP_STATUS_MASK (OP_STATUS_SRC | OP_STATUS_POWER | OP_STATUS_DEV) + +/* + * Operational Finger Count/Button Flags Register + * + * bit 7 - 4: Number of touched finger + * bit 3: Valid data + * bit 2: Middle Physical Button + * bit 1: Right Physical Button + * bit 0: Left physical Button + */ +#define REG_OP_DATA1 0x01 +#define OP_DATA_VALID 0x08 +#define OP_DATA_MIDDLE_BTN 0x04 +#define OP_DATA_RIGHT_BTN 0x02 +#define OP_DATA_LEFT_BTN 0x01 +#define OP_DATA_BTN_MASK (OP_DATA_MIDDLE_BTN | OP_DATA_RIGHT_BTN | \ + OP_DATA_LEFT_BTN) + +/* + * Bootloader Status Register + * + * bit 7: Busy + * bit 6 - 5: Reserved + * bit 4: Bootloader running + * bit 3 - 1: Reserved + * bit 0: Checksum valid + */ +#define REG_BL_STATUS 0x01 +#define BL_STATUS_BUSY 0x80 +#define BL_STATUS_RUNNING 0x10 +#define BL_STATUS_DATA_VALID 0x08 +#define BL_STATUS_CSUM_VALID 0x01 + +/* + * Bootloader Error Register + * + * bit 7: Invalid + * bit 6: Invalid security key + * bit 5: Bootloading + * bit 4: Command checksum + * bit 3: Flash protection error + * bit 2: Flash checksum error + * bit 1 - 0: Reserved + */ +#define REG_BL_ERROR 0x02 +#define BL_ERROR_INVALID 0x80 +#define BL_ERROR_INVALID_KEY 0x40 +#define BL_ERROR_BOOTLOADING 0x20 +#define BL_ERROR_CMD_CSUM 0x10 +#define BL_ERROR_FLASH_PROT 0x08 +#define BL_ERROR_FLASH_CSUM 0x04 + +#define BL_STATUS_SIZE 3 /* length of bootloader status registers */ +#define BLK_HEAD_BYTES 32 + +#define PRODUCT_ID_SIZE 16 +#define QUERY_DATA_SIZE 27 +#define REG_PROTOCOL_GEN_QUERY_OFFSET 20 + +#define REG_OFFSET_DATA_BASE 0x0000 +#define REG_OFFSET_COMMAND_BASE 0x0028 +#define REG_OFFSET_QUERY_BASE 0x002a + +#define CAPABILITY_LEFT_BTN_MASK (0x01 << 3) +#define CAPABILITY_RIGHT_BTN_MASK (0x01 << 4) +#define CAPABILITY_MIDDLE_BTN_MASK (0x01 << 5) +#define CAPABILITY_BTN_MASK (CAPABILITY_LEFT_BTN_MASK | \ + CAPABILITY_RIGHT_BTN_MASK | \ + CAPABILITY_MIDDLE_BTN_MASK) + +#define CYAPA_OFFSET_SOFT_RESET REG_OFFSET_COMMAND_BASE + +#define REG_OFFSET_POWER_MODE (REG_OFFSET_COMMAND_BASE + 1) + +#define PWR_MODE_MASK 0xfc +#define PWR_MODE_FULL_ACTIVE (0x3f << 2) +#define PWR_MODE_IDLE (0x05 << 2) /* default sleep time is 50 ms. */ +#define PWR_MODE_OFF (0x00 << 2) + +#define PWR_STATUS_MASK 0x0c +#define PWR_STATUS_ACTIVE (0x03 << 2) +#define PWR_STATUS_IDLE (0x02 << 2) +#define PWR_STATUS_OFF (0x00 << 2) + +/* + * CYAPA trackpad device states. + * Used in register 0x00, bit1-0, DeviceStatus field. + * Other values indicate device is in an abnormal state and must be reset. + */ +#define CYAPA_DEV_NORMAL 0x03 +#define CYAPA_DEV_BUSY 0x01 + +enum cyapa_state { + CYAPA_STATE_OP, + CYAPA_STATE_BL_IDLE, + CYAPA_STATE_BL_ACTIVE, + CYAPA_STATE_BL_BUSY, + CYAPA_STATE_NO_DEVICE, +}; + + +struct cyapa_touch { + /* + * high bits or x/y position value + * bit 7 - 4: high 4 bits of x position value + * bit 3 - 0: high 4 bits of y position value + */ + u8 xy_hi; + u8 x_lo; /* low 8 bits of x position value. */ + u8 y_lo; /* low 8 bits of y position value. */ + u8 pressure; + /* id range is 1 - 15. It is incremented with every new touch. */ + u8 id; +} __packed; + +/* The touch.id is used as the MT slot id, thus max MT slot is 15 */ +#define CYAPA_MAX_MT_SLOTS 15 + +struct cyapa_reg_data { + /* + * bit 0 - 1: device status + * bit 3 - 2: power mode + * bit 6 - 4: reserved + * bit 7: interrupt valid bit + */ + u8 device_status; + /* + * bit 7 - 4: number of fingers currently touching pad + * bit 3: valid data check bit + * bit 2: middle mechanism button state if exists + * bit 1: right mechanism button state if exists + * bit 0: left mechanism button state if exists + */ + u8 finger_btn; + /* CYAPA reports up to 5 touches per packet. */ + struct cyapa_touch touches[5]; +} __packed; + +/* The main device structure */ +struct cyapa { + enum cyapa_state state; + + struct i2c_client *client; + struct input_dev *input; + char phys[32]; /* device physical location */ + int irq; + bool irq_wake; /* irq wake is enabled */ + bool smbus; + + /* read from query data region. */ + char product_id[16]; + u8 btn_capability; + u8 gen; + int max_abs_x; + int max_abs_y; + int physical_size_x; + int physical_size_y; +}; + +static const u8 bl_deactivate[] = { 0x00, 0xff, 0x3b, 0x00, 0x01, 0x02, 0x03, + 0x04, 0x05, 0x06, 0x07 }; +static const u8 bl_exit[] = { 0x00, 0xff, 0xa5, 0x00, 0x01, 0x02, 0x03, 0x04, + 0x05, 0x06, 0x07 }; + +struct cyapa_cmd_len { + u8 cmd; + u8 len; +}; + +#define CYAPA_ADAPTER_FUNC_NONE 0 +#define CYAPA_ADAPTER_FUNC_I2C 1 +#define CYAPA_ADAPTER_FUNC_SMBUS 2 +#define CYAPA_ADAPTER_FUNC_BOTH 3 + +/* + * macros for SMBus communication + */ +#define SMBUS_READ 0x01 +#define SMBUS_WRITE 0x00 +#define SMBUS_ENCODE_IDX(cmd, idx) ((cmd) | (((idx) & 0x03) << 1)) +#define SMBUS_ENCODE_RW(cmd, rw) ((cmd) | ((rw) & 0x01)) +#define SMBUS_BYTE_BLOCK_CMD_MASK 0x80 +#define SMBUS_GROUP_BLOCK_CMD_MASK 0x40 + + /* for byte read/write command */ +#define CMD_RESET 0 +#define CMD_POWER_MODE 1 +#define CMD_DEV_STATUS 2 +#define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1) +#define CYAPA_SMBUS_RESET SMBUS_BYTE_CMD(CMD_RESET) +#define CYAPA_SMBUS_POWER_MODE SMBUS_BYTE_CMD(CMD_POWER_MODE) +#define CYAPA_SMBUS_DEV_STATUS SMBUS_BYTE_CMD(CMD_DEV_STATUS) + + /* for group registers read/write command */ +#define REG_GROUP_DATA 0 +#define REG_GROUP_CMD 2 +#define REG_GROUP_QUERY 3 +#define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3)) +#define CYAPA_SMBUS_GROUP_DATA SMBUS_GROUP_CMD(REG_GROUP_DATA) +#define CYAPA_SMBUS_GROUP_CMD SMBUS_GROUP_CMD(REG_GROUP_CMD) +#define CYAPA_SMBUS_GROUP_QUERY SMBUS_GROUP_CMD(REG_GROUP_QUERY) + + /* for register block read/write command */ +#define CMD_BL_STATUS 0 +#define CMD_BL_HEAD 1 +#define CMD_BL_CMD 2 +#define CMD_BL_DATA 3 +#define CMD_BL_ALL 4 +#define CMD_BLK_PRODUCT_ID 5 +#define CMD_BLK_HEAD 6 +#define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1)) + +/* register block read/write command in bootloader mode */ +#define CYAPA_SMBUS_BL_STATUS SMBUS_BLOCK_CMD(CMD_BL_STATUS) +#define CYAPA_SMBUS_BL_HEAD SMBUS_BLOCK_CMD(CMD_BL_HEAD) +#define CYAPA_SMBUS_BL_CMD SMBUS_BLOCK_CMD(CMD_BL_CMD) +#define CYAPA_SMBUS_BL_DATA SMBUS_BLOCK_CMD(CMD_BL_DATA) +#define CYAPA_SMBUS_BL_ALL SMBUS_BLOCK_CMD(CMD_BL_ALL) + +/* register block read/write command in operational mode */ +#define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID) +#define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD) + +static const struct cyapa_cmd_len cyapa_i2c_cmds[] = { + { CYAPA_OFFSET_SOFT_RESET, 1 }, + { REG_OFFSET_COMMAND_BASE + 1, 1 }, + { REG_OFFSET_DATA_BASE, 1 }, + { REG_OFFSET_DATA_BASE, sizeof(struct cyapa_reg_data) }, + { REG_OFFSET_COMMAND_BASE, 0 }, + { REG_OFFSET_QUERY_BASE, QUERY_DATA_SIZE }, + { BL_HEAD_OFFSET, 3 }, + { BL_HEAD_OFFSET, 16 }, + { BL_HEAD_OFFSET, 16 }, + { BL_DATA_OFFSET, 16 }, + { BL_HEAD_OFFSET, 32 }, + { REG_OFFSET_QUERY_BASE, PRODUCT_ID_SIZE }, + { REG_OFFSET_DATA_BASE, 32 } +}; + +static const struct cyapa_cmd_len cyapa_smbus_cmds[] = { + { CYAPA_SMBUS_RESET, 1 }, + { CYAPA_SMBUS_POWER_MODE, 1 }, + { CYAPA_SMBUS_DEV_STATUS, 1 }, + { CYAPA_SMBUS_GROUP_DATA, sizeof(struct cyapa_reg_data) }, + { CYAPA_SMBUS_GROUP_CMD, 2 }, + { CYAPA_SMBUS_GROUP_QUERY, QUERY_DATA_SIZE }, + { CYAPA_SMBUS_BL_STATUS, 3 }, + { CYAPA_SMBUS_BL_HEAD, 16 }, + { CYAPA_SMBUS_BL_CMD, 16 }, + { CYAPA_SMBUS_BL_DATA, 16 }, + { CYAPA_SMBUS_BL_ALL, 32 }, + { CYAPA_SMBUS_BLK_PRODUCT_ID, PRODUCT_ID_SIZE }, + { CYAPA_SMBUS_BLK_HEAD, 16 }, +}; + +static ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len, + u8 *values) +{ + return i2c_smbus_read_i2c_block_data(cyapa->client, reg, len, values); +} + +static ssize_t cyapa_i2c_reg_write_block(struct cyapa *cyapa, u8 reg, + size_t len, const u8 *values) +{ + return i2c_smbus_write_i2c_block_data(cyapa->client, reg, len, values); +} + +/* + * cyapa_smbus_read_block - perform smbus block read command + * @cyapa - private data structure of the driver + * @cmd - the properly encoded smbus command + * @len - expected length of smbus command result + * @values - buffer to store smbus command result + * + * Returns negative errno, else the number of bytes written. + * + * Note: + * In trackpad device, the memory block allocated for I2C register map + * is 256 bytes, so the max read block for I2C bus is 256 bytes. + */ +static ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len, + u8 *values) +{ + ssize_t ret; + u8 index; + u8 smbus_cmd; + u8 *buf; + struct i2c_client *client = cyapa->client; + + if (!(SMBUS_BYTE_BLOCK_CMD_MASK & cmd)) + return -EINVAL; + + if (SMBUS_GROUP_BLOCK_CMD_MASK & cmd) { + /* read specific block registers command. */ + smbus_cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ); + ret = i2c_smbus_read_block_data(client, smbus_cmd, values); + goto out; + } + + ret = 0; + for (index = 0; index * I2C_SMBUS_BLOCK_MAX < len; index++) { + smbus_cmd = SMBUS_ENCODE_IDX(cmd, index); + smbus_cmd = SMBUS_ENCODE_RW(smbus_cmd, SMBUS_READ); + buf = values + I2C_SMBUS_BLOCK_MAX * index; + ret = i2c_smbus_read_block_data(client, smbus_cmd, buf); + if (ret < 0) + goto out; + } + +out: + return ret > 0 ? len : ret; +} + +static s32 cyapa_read_byte(struct cyapa *cyapa, u8 cmd_idx) +{ + u8 cmd; + + if (cyapa->smbus) { + cmd = cyapa_smbus_cmds[cmd_idx].cmd; + cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ); + } else { + cmd = cyapa_i2c_cmds[cmd_idx].cmd; + } + return i2c_smbus_read_byte_data(cyapa->client, cmd); +} + +static s32 cyapa_write_byte(struct cyapa *cyapa, u8 cmd_idx, u8 value) +{ + u8 cmd; + + if (cyapa->smbus) { + cmd = cyapa_smbus_cmds[cmd_idx].cmd; + cmd = SMBUS_ENCODE_RW(cmd, SMBUS_WRITE); + } else { + cmd = cyapa_i2c_cmds[cmd_idx].cmd; + } + return i2c_smbus_write_byte_data(cyapa->client, cmd, value); +} + +static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values) +{ + u8 cmd; + size_t len; + + if (cyapa->smbus) { + cmd = cyapa_smbus_cmds[cmd_idx].cmd; + len = cyapa_smbus_cmds[cmd_idx].len; + return cyapa_smbus_read_block(cyapa, cmd, len, values); + } else { + cmd = cyapa_i2c_cmds[cmd_idx].cmd; + len = cyapa_i2c_cmds[cmd_idx].len; + return cyapa_i2c_reg_read_block(cyapa, cmd, len, values); + } +} + +/* + * Query device for its current operating state. + * + */ +static int cyapa_get_state(struct cyapa *cyapa) +{ + int ret; + u8 status[BL_STATUS_SIZE]; + + cyapa->state = CYAPA_STATE_NO_DEVICE; + + /* + * Get trackpad status by reading 3 registers starting from 0. + * If the device is in the bootloader, this will be BL_HEAD. + * If the device is in operation mode, this will be the DATA regs. + * + */ + ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE, + status); + + /* + * On smbus systems in OP mode, the i2c_reg_read will fail with + * -ETIMEDOUT. In this case, try again using the smbus equivalent + * command. This should return a BL_HEAD indicating CYAPA_STATE_OP. + */ + if (cyapa->smbus && (ret == -ETIMEDOUT || ret == -ENXIO)) + ret = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status); + + if (ret != BL_STATUS_SIZE) + goto error; + + if ((status[REG_OP_STATUS] & OP_STATUS_SRC) == OP_STATUS_SRC) { + switch (status[REG_OP_STATUS] & OP_STATUS_DEV) { + case CYAPA_DEV_NORMAL: + case CYAPA_DEV_BUSY: + cyapa->state = CYAPA_STATE_OP; + break; + default: + ret = -EAGAIN; + goto error; + } + } else { + if (status[REG_BL_STATUS] & BL_STATUS_BUSY) + cyapa->state = CYAPA_STATE_BL_BUSY; + else if (status[REG_BL_ERROR] & BL_ERROR_BOOTLOADING) + cyapa->state = CYAPA_STATE_BL_ACTIVE; + else + cyapa->state = CYAPA_STATE_BL_IDLE; + } + + return 0; +error: + return (ret < 0) ? ret : -EAGAIN; +} + +/* + * Poll device for its status in a loop, waiting up to timeout for a response. + * + * When the device switches state, it usually takes ~300 ms. + * However, when running a new firmware image, the device must calibrate its + * sensors, which can take as long as 2 seconds. + * + * Note: The timeout has granularity of the polling rate, which is 100 ms. + * + * Returns: + * 0 when the device eventually responds with a valid non-busy state. + * -ETIMEDOUT if device never responds (too many -EAGAIN) + * < 0 other errors + */ +static int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout) +{ + int ret; + int tries = timeout / 100; + + ret = cyapa_get_state(cyapa); + while ((ret || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) { + msleep(100); + ret = cyapa_get_state(cyapa); + } + return (ret == -EAGAIN || ret == -ETIMEDOUT) ? -ETIMEDOUT : ret; +} + +static int cyapa_bl_deactivate(struct cyapa *cyapa) +{ + int ret; + + ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate), + bl_deactivate); + if (ret < 0) + return ret; + + /* wait for bootloader to switch to idle state; should take < 100ms */ + msleep(100); + ret = cyapa_poll_state(cyapa, 500); + if (ret < 0) + return ret; + if (cyapa->state != CYAPA_STATE_BL_IDLE) + return -EAGAIN; + return 0; +} + +/* + * Exit bootloader + * + * Send bl_exit command, then wait 50 - 100 ms to let device transition to + * operational mode. If this is the first time the device's firmware is + * running, it can take up to 2 seconds to calibrate its sensors. So, poll + * the device's new state for up to 2 seconds. + * + * Returns: + * -EIO failure while reading from device + * -EAGAIN device is stuck in bootloader, b/c it has invalid firmware + * 0 device is supported and in operational mode + */ +static int cyapa_bl_exit(struct cyapa *cyapa) +{ + int ret; + + ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit); + if (ret < 0) + return ret; + + /* + * Wait for bootloader to exit, and operation mode to start. + * Normally, this takes at least 50 ms. + */ + usleep_range(50000, 100000); + /* + * In addition, when a device boots for the first time after being + * updated to new firmware, it must first calibrate its sensors, which + * can take up to an additional 2 seconds. + */ + ret = cyapa_poll_state(cyapa, 2000); + if (ret < 0) + return ret; + if (cyapa->state != CYAPA_STATE_OP) + return -EAGAIN; + + return 0; +} + +/* + * Set device power mode + * + */ +static int cyapa_set_power_mode(struct cyapa *cyapa, u8 power_mode) +{ + struct device *dev = &cyapa->client->dev; + int ret; + u8 power; + + if (cyapa->state != CYAPA_STATE_OP) + return 0; + + ret = cyapa_read_byte(cyapa, CYAPA_CMD_POWER_MODE); + if (ret < 0) + return ret; + + power = ret & ~PWR_MODE_MASK; + power |= power_mode & PWR_MODE_MASK; + ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power); + if (ret < 0) + dev_err(dev, "failed to set power_mode 0x%02x err = %d\n", + power_mode, ret); + return ret; +} + +static int cyapa_get_query_data(struct cyapa *cyapa) +{ + u8 query_data[QUERY_DATA_SIZE]; + int ret; + + if (cyapa->state != CYAPA_STATE_OP) + return -EBUSY; + + ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_QUERY, query_data); + if (ret < 0) + return ret; + if (ret != QUERY_DATA_SIZE) + return -EIO; + + memcpy(&cyapa->product_id[0], &query_data[0], 5); + cyapa->product_id[5] = '-'; + memcpy(&cyapa->product_id[6], &query_data[5], 6); + cyapa->product_id[12] = '-'; + memcpy(&cyapa->product_id[13], &query_data[11], 2); + cyapa->product_id[15] = '\0'; + + cyapa->btn_capability = query_data[19] & CAPABILITY_BTN_MASK; + + cyapa->gen = query_data[20] & 0x0f; + + cyapa->max_abs_x = ((query_data[21] & 0xf0) << 4) | query_data[22]; + cyapa->max_abs_y = ((query_data[21] & 0x0f) << 8) | query_data[23]; + + cyapa->physical_size_x = + ((query_data[24] & 0xf0) << 4) | query_data[25]; + cyapa->physical_size_y = + ((query_data[24] & 0x0f) << 8) | query_data[26]; + + return 0; +} + +/* + * Check if device is operational. + * + * An operational device is responding, has exited bootloader, and has + * firmware supported by this driver. + * + * Returns: + * -EBUSY no device or in bootloader + * -EIO failure while reading from device + * -EAGAIN device is still in bootloader + * if ->state = CYAPA_STATE_BL_IDLE, device has invalid firmware + * -EINVAL device is in operational mode, but not supported by this driver + * 0 device is supported + */ +static int cyapa_check_is_operational(struct cyapa *cyapa) +{ + struct device *dev = &cyapa->client->dev; + static const char unique_str[] = "CYTRA"; + int ret; + + ret = cyapa_poll_state(cyapa, 2000); + if (ret < 0) + return ret; + switch (cyapa->state) { + case CYAPA_STATE_BL_ACTIVE: + ret = cyapa_bl_deactivate(cyapa); + if (ret) + return ret; + + /* Fallthrough state */ + case CYAPA_STATE_BL_IDLE: + ret = cyapa_bl_exit(cyapa); + if (ret) + return ret; + + /* Fallthrough state */ + case CYAPA_STATE_OP: + ret = cyapa_get_query_data(cyapa); + if (ret < 0) + return ret; + + /* only support firmware protocol gen3 */ + if (cyapa->gen != CYAPA_GEN3) { + dev_err(dev, "unsupported protocol version (%d)", + cyapa->gen); + return -EINVAL; + } + + /* only support product ID starting with CYTRA */ + if (memcmp(cyapa->product_id, unique_str, + sizeof(unique_str) - 1) != 0) { + dev_err(dev, "unsupported product ID (%s)\n", + cyapa->product_id); + return -EINVAL; + } + return 0; + + default: + return -EIO; + } + return 0; +} + +static irqreturn_t cyapa_irq(int irq, void *dev_id) +{ + struct cyapa *cyapa = dev_id; + struct device *dev = &cyapa->client->dev; + struct input_dev *input = cyapa->input; + struct cyapa_reg_data data; + int i; + int ret; + int num_fingers; + + if (device_may_wakeup(dev)) + pm_wakeup_event(dev, 0); + + ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data); + if (ret != sizeof(data)) + goto out; + + if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC || + (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL || + (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) { + goto out; + } + + num_fingers = (data.finger_btn >> 4) & 0x0f; + for (i = 0; i < num_fingers; i++) { + const struct cyapa_touch *touch = &data.touches[i]; + /* Note: touch->id range is 1 to 15; slots are 0 to 14. */ + int slot = touch->id - 1; + + input_mt_slot(input, slot); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, + ((touch->xy_hi & 0xf0) << 4) | touch->x_lo); + input_report_abs(input, ABS_MT_POSITION_Y, + ((touch->xy_hi & 0x0f) << 8) | touch->y_lo); + input_report_abs(input, ABS_MT_PRESSURE, touch->pressure); + } + + input_mt_sync_frame(input); + + if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK) + input_report_key(input, BTN_LEFT, + data.finger_btn & OP_DATA_LEFT_BTN); + + if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK) + input_report_key(input, BTN_MIDDLE, + data.finger_btn & OP_DATA_MIDDLE_BTN); + + if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK) + input_report_key(input, BTN_RIGHT, + data.finger_btn & OP_DATA_RIGHT_BTN); + + input_sync(input); + +out: + return IRQ_HANDLED; +} + +static u8 cyapa_check_adapter_functionality(struct i2c_client *client) +{ + u8 ret = CYAPA_ADAPTER_FUNC_NONE; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + ret |= CYAPA_ADAPTER_FUNC_I2C; + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) + ret |= CYAPA_ADAPTER_FUNC_SMBUS; + return ret; +} + +static int cyapa_create_input_dev(struct cyapa *cyapa) +{ + struct device *dev = &cyapa->client->dev; + int ret; + struct input_dev *input; + + if (!cyapa->physical_size_x || !cyapa->physical_size_y) + return -EINVAL; + + input = cyapa->input = input_allocate_device(); + if (!input) { + dev_err(dev, "allocate memory for input device failed\n"); + return -ENOMEM; + } + + input->name = CYAPA_NAME; + input->phys = cyapa->phys; + input->id.bustype = BUS_I2C; + input->id.version = 1; + input->id.product = 0; /* means any product in eventcomm. */ + input->dev.parent = &cyapa->client->dev; + + input_set_drvdata(input, cyapa); + + __set_bit(EV_ABS, input->evbit); + + /* finger position */ + input_set_abs_params(input, ABS_MT_POSITION_X, 0, cyapa->max_abs_x, 0, + 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cyapa->max_abs_y, 0, + 0); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0); + + input_abs_set_res(input, ABS_MT_POSITION_X, + cyapa->max_abs_x / cyapa->physical_size_x); + input_abs_set_res(input, ABS_MT_POSITION_Y, + cyapa->max_abs_y / cyapa->physical_size_y); + + if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK) + __set_bit(BTN_LEFT, input->keybit); + if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK) + __set_bit(BTN_MIDDLE, input->keybit); + if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK) + __set_bit(BTN_RIGHT, input->keybit); + + if (cyapa->btn_capability == CAPABILITY_LEFT_BTN_MASK) + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); + + /* handle pointer emulation and unused slots in core */ + ret = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS, + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED); + if (ret) { + dev_err(dev, "allocate memory for MT slots failed, %d\n", ret); + goto err_free_device; + } + + /* Register the device in input subsystem */ + ret = input_register_device(input); + if (ret) { + dev_err(dev, "input device register failed, %d\n", ret); + goto err_free_device; + } + return 0; + +err_free_device: + input_free_device(input); + cyapa->input = NULL; + return ret; +} + +static int cyapa_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int ret; + u8 adapter_func; + struct cyapa *cyapa; + struct device *dev = &client->dev; + + adapter_func = cyapa_check_adapter_functionality(client); + if (adapter_func == CYAPA_ADAPTER_FUNC_NONE) { + dev_err(dev, "not a supported I2C/SMBus adapter\n"); + return -EIO; + } + + cyapa = kzalloc(sizeof(struct cyapa), GFP_KERNEL); + if (!cyapa) { + dev_err(dev, "allocate memory for cyapa failed\n"); + return -ENOMEM; + } + + cyapa->gen = CYAPA_GEN3; + cyapa->client = client; + i2c_set_clientdata(client, cyapa); + sprintf(cyapa->phys, "i2c-%d-%04x/input0", client->adapter->nr, + client->addr); + + /* i2c isn't supported, use smbus */ + if (adapter_func == CYAPA_ADAPTER_FUNC_SMBUS) + cyapa->smbus = true; + cyapa->state = CYAPA_STATE_NO_DEVICE; + ret = cyapa_check_is_operational(cyapa); + if (ret) { + dev_err(dev, "device not operational, %d\n", ret); + goto err_mem_free; + } + + ret = cyapa_create_input_dev(cyapa); + if (ret) { + dev_err(dev, "create input_dev instance failed, %d\n", ret); + goto err_mem_free; + } + + ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); + if (ret) { + dev_err(dev, "set active power failed, %d\n", ret); + goto err_unregister_device; + } + + cyapa->irq = client->irq; + ret = request_threaded_irq(cyapa->irq, + NULL, + cyapa_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "cyapa", + cyapa); + if (ret) { + dev_err(dev, "IRQ request failed: %d\n, ", ret); + goto err_unregister_device; + } + + return 0; + +err_unregister_device: + input_unregister_device(cyapa->input); +err_mem_free: + kfree(cyapa); + + return ret; +} + +static int cyapa_remove(struct i2c_client *client) +{ + struct cyapa *cyapa = i2c_get_clientdata(client); + + free_irq(cyapa->irq, cyapa); + input_unregister_device(cyapa->input); + cyapa_set_power_mode(cyapa, PWR_MODE_OFF); + kfree(cyapa); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int cyapa_suspend(struct device *dev) +{ + int ret; + u8 power_mode; + struct cyapa *cyapa = dev_get_drvdata(dev); + + disable_irq(cyapa->irq); + + /* + * Set trackpad device to idle mode if wakeup is allowed, + * otherwise turn off. + */ + power_mode = device_may_wakeup(dev) ? PWR_MODE_IDLE + : PWR_MODE_OFF; + ret = cyapa_set_power_mode(cyapa, power_mode); + if (ret < 0) + dev_err(dev, "set power mode failed, %d\n", ret); + + if (device_may_wakeup(dev)) + cyapa->irq_wake = (enable_irq_wake(cyapa->irq) == 0); + return 0; +} + +static int cyapa_resume(struct device *dev) +{ + int ret; + struct cyapa *cyapa = dev_get_drvdata(dev); + + if (device_may_wakeup(dev) && cyapa->irq_wake) + disable_irq_wake(cyapa->irq); + + ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); + if (ret) + dev_warn(dev, "resume active power failed, %d\n", ret); + + enable_irq(cyapa->irq); + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(cyapa_pm_ops, cyapa_suspend, cyapa_resume); + +static const struct i2c_device_id cyapa_id_table[] = { + { "cyapa", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, cyapa_id_table); + +static struct i2c_driver cyapa_driver = { + .driver = { + .name = "cyapa", + .owner = THIS_MODULE, + .pm = &cyapa_pm_ops, + }, + + .probe = cyapa_probe, + .remove = cyapa_remove, + .id_table = cyapa_id_table, +}; + +module_i2c_driver(cyapa_driver); + +MODULE_DESCRIPTION("Cypress APA I2C Trackpad Driver"); +MODULE_AUTHOR("Dudley Du <dudl@cypress.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c new file mode 100644 index 00000000000..8af34ffe208 --- /dev/null +++ b/drivers/input/mouse/cypress_ps2.c @@ -0,0 +1,717 @@ +/* + * Cypress Trackpad PS/2 mouse driver + * + * Copyright (c) 2012 Cypress Semiconductor Corporation. + * + * Author: + * Dudley Du <dudl@cypress.com> + * + * Additional contributors include: + * Kamal Mostafa <kamal@canonical.com> + * Kyle Fazzari <git@status.e4ward.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/serio.h> +#include <linux/libps2.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/sched.h> +#include <linux/wait.h> + +#include "cypress_ps2.h" + +#undef CYTP_DEBUG_VERBOSE /* define this and DEBUG for more verbose dump */ + +static void cypress_set_packet_size(struct psmouse *psmouse, unsigned int n) +{ + struct cytp_data *cytp = psmouse->private; + cytp->pkt_size = n; +} + +static const unsigned char cytp_rate[] = {10, 20, 40, 60, 100, 200}; +static const unsigned char cytp_resolution[] = {0x00, 0x01, 0x02, 0x03}; + +static int cypress_ps2_sendbyte(struct psmouse *psmouse, int value) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + + if (ps2_sendbyte(ps2dev, value & 0xff, CYTP_CMD_TIMEOUT) < 0) { + psmouse_dbg(psmouse, + "sending command 0x%02x failed, resp 0x%02x\n", + value & 0xff, ps2dev->nak); + if (ps2dev->nak == CYTP_PS2_RETRY) + return CYTP_PS2_RETRY; + else + return CYTP_PS2_ERROR; + } + +#ifdef CYTP_DEBUG_VERBOSE + psmouse_dbg(psmouse, "sending command 0x%02x succeeded, resp 0xfa\n", + value & 0xff); +#endif + + return 0; +} + +static int cypress_ps2_ext_cmd(struct psmouse *psmouse, unsigned short cmd, + unsigned char data) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + int tries = CYTP_PS2_CMD_TRIES; + int rc; + + ps2_begin_command(ps2dev); + + do { + /* + * Send extension command byte (0xE8 or 0xF3). + * If sending the command fails, send recovery command + * to make the device return to the ready state. + */ + rc = cypress_ps2_sendbyte(psmouse, cmd & 0xff); + if (rc == CYTP_PS2_RETRY) { + rc = cypress_ps2_sendbyte(psmouse, 0x00); + if (rc == CYTP_PS2_RETRY) + rc = cypress_ps2_sendbyte(psmouse, 0x0a); + } + if (rc == CYTP_PS2_ERROR) + continue; + + rc = cypress_ps2_sendbyte(psmouse, data); + if (rc == CYTP_PS2_RETRY) + rc = cypress_ps2_sendbyte(psmouse, data); + if (rc == CYTP_PS2_ERROR) + continue; + else + break; + } while (--tries > 0); + + ps2_end_command(ps2dev); + + return rc; +} + +static int cypress_ps2_read_cmd_status(struct psmouse *psmouse, + unsigned char cmd, + unsigned char *param) +{ + int rc; + struct ps2dev *ps2dev = &psmouse->ps2dev; + enum psmouse_state old_state; + int pktsize; + + ps2_begin_command(&psmouse->ps2dev); + + old_state = psmouse->state; + psmouse->state = PSMOUSE_CMD_MODE; + psmouse->pktcnt = 0; + + pktsize = (cmd == CYTP_CMD_READ_TP_METRICS) ? 8 : 3; + memset(param, 0, pktsize); + + rc = cypress_ps2_sendbyte(psmouse, 0xe9); + if (rc < 0) + goto out; + + wait_event_timeout(ps2dev->wait, + (psmouse->pktcnt >= pktsize), + msecs_to_jiffies(CYTP_CMD_TIMEOUT)); + + memcpy(param, psmouse->packet, pktsize); + + psmouse_dbg(psmouse, "Command 0x%02x response data (0x): %*ph\n", + cmd, pktsize, param); + +out: + psmouse->state = old_state; + psmouse->pktcnt = 0; + + ps2_end_command(&psmouse->ps2dev); + + return rc; +} + +static bool cypress_verify_cmd_state(struct psmouse *psmouse, + unsigned char cmd, unsigned char *param) +{ + bool rate_match = false; + bool resolution_match = false; + int i; + + /* callers will do further checking. */ + if (cmd == CYTP_CMD_READ_CYPRESS_ID || + cmd == CYTP_CMD_STANDARD_MODE || + cmd == CYTP_CMD_READ_TP_METRICS) + return true; + + if ((~param[0] & DFLT_RESP_BITS_VALID) == DFLT_RESP_BITS_VALID && + (param[0] & DFLT_RESP_BIT_MODE) == DFLT_RESP_STREAM_MODE) { + for (i = 0; i < sizeof(cytp_resolution); i++) + if (cytp_resolution[i] == param[1]) + resolution_match = true; + + for (i = 0; i < sizeof(cytp_rate); i++) + if (cytp_rate[i] == param[2]) + rate_match = true; + + if (resolution_match && rate_match) + return true; + } + + psmouse_dbg(psmouse, "verify cmd state failed.\n"); + return false; +} + +static int cypress_send_ext_cmd(struct psmouse *psmouse, unsigned char cmd, + unsigned char *param) +{ + int tries = CYTP_PS2_CMD_TRIES; + int rc; + + psmouse_dbg(psmouse, "send extension cmd 0x%02x, [%d %d %d %d]\n", + cmd, DECODE_CMD_AA(cmd), DECODE_CMD_BB(cmd), + DECODE_CMD_CC(cmd), DECODE_CMD_DD(cmd)); + + do { + cypress_ps2_ext_cmd(psmouse, + PSMOUSE_CMD_SETRES, DECODE_CMD_DD(cmd)); + cypress_ps2_ext_cmd(psmouse, + PSMOUSE_CMD_SETRES, DECODE_CMD_CC(cmd)); + cypress_ps2_ext_cmd(psmouse, + PSMOUSE_CMD_SETRES, DECODE_CMD_BB(cmd)); + cypress_ps2_ext_cmd(psmouse, + PSMOUSE_CMD_SETRES, DECODE_CMD_AA(cmd)); + + rc = cypress_ps2_read_cmd_status(psmouse, cmd, param); + if (rc) + continue; + + if (cypress_verify_cmd_state(psmouse, cmd, param)) + return 0; + + } while (--tries > 0); + + return -EIO; +} + +int cypress_detect(struct psmouse *psmouse, bool set_properties) +{ + unsigned char param[3]; + + if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_CYPRESS_ID, param)) + return -ENODEV; + + /* Check for Cypress Trackpad signature bytes: 0x33 0xCC */ + if (param[0] != 0x33 || param[1] != 0xCC) + return -ENODEV; + + if (set_properties) { + psmouse->vendor = "Cypress"; + psmouse->name = "Trackpad"; + } + + return 0; +} + +static int cypress_read_fw_version(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + unsigned char param[3]; + + if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_CYPRESS_ID, param)) + return -ENODEV; + + /* Check for Cypress Trackpad signature bytes: 0x33 0xCC */ + if (param[0] != 0x33 || param[1] != 0xCC) + return -ENODEV; + + cytp->fw_version = param[2] & FW_VERSION_MASX; + cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0; + + /* + * Trackpad fw_version 11 (in Dell XPS12) yields a bogus response to + * CYTP_CMD_READ_TP_METRICS so do not try to use it. LP: #1103594. + */ + if (cytp->fw_version >= 11) + cytp->tp_metrics_supported = 0; + + psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version); + psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n", + cytp->tp_metrics_supported); + + return 0; +} + +static int cypress_read_tp_metrics(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + unsigned char param[8]; + + /* set default values for tp metrics. */ + cytp->tp_width = CYTP_DEFAULT_WIDTH; + cytp->tp_high = CYTP_DEFAULT_HIGH; + cytp->tp_max_abs_x = CYTP_ABS_MAX_X; + cytp->tp_max_abs_y = CYTP_ABS_MAX_Y; + cytp->tp_min_pressure = CYTP_MIN_PRESSURE; + cytp->tp_max_pressure = CYTP_MAX_PRESSURE; + cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width; + cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high; + + if (!cytp->tp_metrics_supported) + return 0; + + memset(param, 0, sizeof(param)); + if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) { + /* Update trackpad parameters. */ + cytp->tp_max_abs_x = (param[1] << 8) | param[0]; + cytp->tp_max_abs_y = (param[3] << 8) | param[2]; + cytp->tp_min_pressure = param[4]; + cytp->tp_max_pressure = param[5]; + } + + if (!cytp->tp_max_pressure || + cytp->tp_max_pressure < cytp->tp_min_pressure || + !cytp->tp_width || !cytp->tp_high || + !cytp->tp_max_abs_x || + cytp->tp_max_abs_x < cytp->tp_width || + !cytp->tp_max_abs_y || + cytp->tp_max_abs_y < cytp->tp_high) + return -EINVAL; + + cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width; + cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high; + +#ifdef CYTP_DEBUG_VERBOSE + psmouse_dbg(psmouse, "Dump trackpad hardware configuration as below:\n"); + psmouse_dbg(psmouse, "cytp->tp_width = %d\n", cytp->tp_width); + psmouse_dbg(psmouse, "cytp->tp_high = %d\n", cytp->tp_high); + psmouse_dbg(psmouse, "cytp->tp_max_abs_x = %d\n", cytp->tp_max_abs_x); + psmouse_dbg(psmouse, "cytp->tp_max_abs_y = %d\n", cytp->tp_max_abs_y); + psmouse_dbg(psmouse, "cytp->tp_min_pressure = %d\n", cytp->tp_min_pressure); + psmouse_dbg(psmouse, "cytp->tp_max_pressure = %d\n", cytp->tp_max_pressure); + psmouse_dbg(psmouse, "cytp->tp_res_x = %d\n", cytp->tp_res_x); + psmouse_dbg(psmouse, "cytp->tp_res_y = %d\n", cytp->tp_res_y); + + psmouse_dbg(psmouse, "tp_type_APA = %d\n", + (param[6] & TP_METRICS_BIT_APA) ? 1 : 0); + psmouse_dbg(psmouse, "tp_type_MTG = %d\n", + (param[6] & TP_METRICS_BIT_MTG) ? 1 : 0); + psmouse_dbg(psmouse, "tp_palm = %d\n", + (param[6] & TP_METRICS_BIT_PALM) ? 1 : 0); + psmouse_dbg(psmouse, "tp_stubborn = %d\n", + (param[6] & TP_METRICS_BIT_STUBBORN) ? 1 : 0); + psmouse_dbg(psmouse, "tp_1f_jitter = %d\n", + (param[6] & TP_METRICS_BIT_1F_JITTER) >> 2); + psmouse_dbg(psmouse, "tp_2f_jitter = %d\n", + (param[6] & TP_METRICS_BIT_2F_JITTER) >> 4); + psmouse_dbg(psmouse, "tp_1f_spike = %d\n", + param[7] & TP_METRICS_BIT_1F_SPIKE); + psmouse_dbg(psmouse, "tp_2f_spike = %d\n", + (param[7] & TP_METRICS_BIT_2F_SPIKE) >> 2); + psmouse_dbg(psmouse, "tp_abs_packet_format_set = %d\n", + (param[7] & TP_METRICS_BIT_ABS_PKT_FORMAT_SET) >> 4); +#endif + + return 0; +} + +static int cypress_query_hardware(struct psmouse *psmouse) +{ + int ret; + + ret = cypress_read_fw_version(psmouse); + if (ret) + return ret; + + ret = cypress_read_tp_metrics(psmouse); + if (ret) + return ret; + + return 0; +} + +static int cypress_set_absolute_mode(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + unsigned char param[3]; + + if (cypress_send_ext_cmd(psmouse, CYTP_CMD_ABS_WITH_PRESSURE_MODE, param) < 0) + return -1; + + cytp->mode = (cytp->mode & ~CYTP_BIT_ABS_REL_MASK) + | CYTP_BIT_ABS_PRESSURE; + cypress_set_packet_size(psmouse, 5); + + return 0; +} + +/* + * Reset trackpad device. + * This is also the default mode when trackpad powered on. + */ +static void cypress_reset(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + + cytp->mode = 0; + + psmouse_reset(psmouse); +} + +static int cypress_set_input_params(struct input_dev *input, + struct cytp_data *cytp) +{ + int ret; + + if (!cytp->tp_res_x || !cytp->tp_res_y) + return -EINVAL; + + __set_bit(EV_ABS, input->evbit); + input_set_abs_params(input, ABS_X, 0, cytp->tp_max_abs_x, 0, 0); + input_set_abs_params(input, ABS_Y, 0, cytp->tp_max_abs_y, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, + cytp->tp_min_pressure, cytp->tp_max_pressure, 0, 0); + input_set_abs_params(input, ABS_TOOL_WIDTH, 0, 255, 0, 0); + + /* finger position */ + input_set_abs_params(input, ABS_MT_POSITION_X, 0, cytp->tp_max_abs_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cytp->tp_max_abs_y, 0, 0); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0); + + ret = input_mt_init_slots(input, CYTP_MAX_MT_SLOTS, + INPUT_MT_DROP_UNUSED|INPUT_MT_TRACK); + if (ret < 0) + return ret; + + __set_bit(INPUT_PROP_SEMI_MT, input->propbit); + + input_abs_set_res(input, ABS_X, cytp->tp_res_x); + input_abs_set_res(input, ABS_Y, cytp->tp_res_y); + + input_abs_set_res(input, ABS_MT_POSITION_X, cytp->tp_res_x); + input_abs_set_res(input, ABS_MT_POSITION_Y, cytp->tp_res_y); + + __set_bit(BTN_TOUCH, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input->keybit); + __set_bit(BTN_TOOL_QUADTAP, input->keybit); + __set_bit(BTN_TOOL_QUINTTAP, input->keybit); + + __clear_bit(EV_REL, input->evbit); + __clear_bit(REL_X, input->relbit); + __clear_bit(REL_Y, input->relbit); + + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_LEFT, input->keybit); + __set_bit(BTN_RIGHT, input->keybit); + __set_bit(BTN_MIDDLE, input->keybit); + + input_set_drvdata(input, cytp); + + return 0; +} + +static int cypress_get_finger_count(unsigned char header_byte) +{ + unsigned char bits6_7; + int finger_count; + + bits6_7 = header_byte >> 6; + finger_count = bits6_7 & 0x03; + + if (finger_count == 1) + return 1; + + if (header_byte & ABS_HSCROLL_BIT) { + /* HSCROLL gets added on to 0 finger count. */ + switch (finger_count) { + case 0: return 4; + case 2: return 5; + default: + /* Invalid contact (e.g. palm). Ignore it. */ + return 0; + } + } + + return finger_count; +} + + +static int cypress_parse_packet(struct psmouse *psmouse, + struct cytp_data *cytp, struct cytp_report_data *report_data) +{ + unsigned char *packet = psmouse->packet; + unsigned char header_byte = packet[0]; + + memset(report_data, 0, sizeof(struct cytp_report_data)); + + report_data->contact_cnt = cypress_get_finger_count(header_byte); + report_data->tap = (header_byte & ABS_MULTIFINGER_TAP) ? 1 : 0; + + if (report_data->contact_cnt == 1) { + report_data->contacts[0].x = + ((packet[1] & 0x70) << 4) | packet[2]; + report_data->contacts[0].y = + ((packet[1] & 0x07) << 8) | packet[3]; + if (cytp->mode & CYTP_BIT_ABS_PRESSURE) + report_data->contacts[0].z = packet[4]; + + } else if (report_data->contact_cnt >= 2) { + report_data->contacts[0].x = + ((packet[1] & 0x70) << 4) | packet[2]; + report_data->contacts[0].y = + ((packet[1] & 0x07) << 8) | packet[3]; + if (cytp->mode & CYTP_BIT_ABS_PRESSURE) + report_data->contacts[0].z = packet[4]; + + report_data->contacts[1].x = + ((packet[5] & 0xf0) << 4) | packet[6]; + report_data->contacts[1].y = + ((packet[5] & 0x0f) << 8) | packet[7]; + if (cytp->mode & CYTP_BIT_ABS_PRESSURE) + report_data->contacts[1].z = report_data->contacts[0].z; + } + + report_data->left = (header_byte & BTN_LEFT_BIT) ? 1 : 0; + report_data->right = (header_byte & BTN_RIGHT_BIT) ? 1 : 0; + + /* + * This is only true if one of the mouse buttons were tapped. Make + * sure it doesn't turn into a click. The regular tap-to-click + * functionality will handle that on its own. If we don't do this, + * disabling tap-to-click won't affect the mouse button zones. + */ + if (report_data->tap) + report_data->left = 0; + +#ifdef CYTP_DEBUG_VERBOSE + { + int i; + int n = report_data->contact_cnt; + psmouse_dbg(psmouse, "Dump parsed report data as below:\n"); + psmouse_dbg(psmouse, "contact_cnt = %d\n", + report_data->contact_cnt); + if (n > CYTP_MAX_MT_SLOTS) + n = CYTP_MAX_MT_SLOTS; + for (i = 0; i < n; i++) + psmouse_dbg(psmouse, "contacts[%d] = {%d, %d, %d}\n", i, + report_data->contacts[i].x, + report_data->contacts[i].y, + report_data->contacts[i].z); + psmouse_dbg(psmouse, "left = %d\n", report_data->left); + psmouse_dbg(psmouse, "right = %d\n", report_data->right); + psmouse_dbg(psmouse, "middle = %d\n", report_data->middle); + } +#endif + + return 0; +} + +static void cypress_process_packet(struct psmouse *psmouse, bool zero_pkt) +{ + int i; + struct input_dev *input = psmouse->dev; + struct cytp_data *cytp = psmouse->private; + struct cytp_report_data report_data; + struct cytp_contact *contact; + struct input_mt_pos pos[CYTP_MAX_MT_SLOTS]; + int slots[CYTP_MAX_MT_SLOTS]; + int n; + + cypress_parse_packet(psmouse, cytp, &report_data); + + n = report_data.contact_cnt; + if (n > CYTP_MAX_MT_SLOTS) + n = CYTP_MAX_MT_SLOTS; + + for (i = 0; i < n; i++) { + contact = &report_data.contacts[i]; + pos[i].x = contact->x; + pos[i].y = contact->y; + } + + input_mt_assign_slots(input, slots, pos, n); + + for (i = 0; i < n; i++) { + contact = &report_data.contacts[i]; + input_mt_slot(input, slots[i]); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, contact->x); + input_report_abs(input, ABS_MT_POSITION_Y, contact->y); + input_report_abs(input, ABS_MT_PRESSURE, contact->z); + } + + input_mt_sync_frame(input); + + input_mt_report_finger_count(input, report_data.contact_cnt); + + input_report_key(input, BTN_LEFT, report_data.left); + input_report_key(input, BTN_RIGHT, report_data.right); + input_report_key(input, BTN_MIDDLE, report_data.middle); + + input_sync(input); +} + +static psmouse_ret_t cypress_validate_byte(struct psmouse *psmouse) +{ + int contact_cnt; + int index = psmouse->pktcnt - 1; + unsigned char *packet = psmouse->packet; + struct cytp_data *cytp = psmouse->private; + + if (index < 0 || index > cytp->pkt_size) + return PSMOUSE_BAD_DATA; + + if (index == 0 && (packet[0] & 0xfc) == 0) { + /* call packet process for reporting finger leave. */ + cypress_process_packet(psmouse, 1); + return PSMOUSE_FULL_PACKET; + } + + /* + * Perform validation (and adjust packet size) based only on the + * first byte; allow all further bytes through. + */ + if (index != 0) + return PSMOUSE_GOOD_DATA; + + /* + * If absolute/relative mode bit has not been set yet, just pass + * the byte through. + */ + if ((cytp->mode & CYTP_BIT_ABS_REL_MASK) == 0) + return PSMOUSE_GOOD_DATA; + + if ((packet[0] & 0x08) == 0x08) + return PSMOUSE_BAD_DATA; + + contact_cnt = cypress_get_finger_count(packet[0]); + if (cytp->mode & CYTP_BIT_ABS_NO_PRESSURE) + cypress_set_packet_size(psmouse, contact_cnt == 2 ? 7 : 4); + else + cypress_set_packet_size(psmouse, contact_cnt == 2 ? 8 : 5); + + return PSMOUSE_GOOD_DATA; +} + +static psmouse_ret_t cypress_protocol_handler(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + + if (psmouse->pktcnt >= cytp->pkt_size) { + cypress_process_packet(psmouse, 0); + return PSMOUSE_FULL_PACKET; + } + + return cypress_validate_byte(psmouse); +} + +static void cypress_set_rate(struct psmouse *psmouse, unsigned int rate) +{ + struct cytp_data *cytp = psmouse->private; + + if (rate >= 80) { + psmouse->rate = 80; + cytp->mode |= CYTP_BIT_HIGH_RATE; + } else { + psmouse->rate = 40; + cytp->mode &= ~CYTP_BIT_HIGH_RATE; + } + + ps2_command(&psmouse->ps2dev, (unsigned char *)&psmouse->rate, + PSMOUSE_CMD_SETRATE); +} + +static void cypress_disconnect(struct psmouse *psmouse) +{ + cypress_reset(psmouse); + kfree(psmouse->private); + psmouse->private = NULL; +} + +static int cypress_reconnect(struct psmouse *psmouse) +{ + int tries = CYTP_PS2_CMD_TRIES; + int rc; + + do { + cypress_reset(psmouse); + rc = cypress_detect(psmouse, false); + } while (rc && (--tries > 0)); + + if (rc) { + psmouse_err(psmouse, "Reconnect: unable to detect trackpad.\n"); + return -1; + } + + if (cypress_set_absolute_mode(psmouse)) { + psmouse_err(psmouse, "Reconnect: Unable to initialize Cypress absolute mode.\n"); + return -1; + } + + return 0; +} + +int cypress_init(struct psmouse *psmouse) +{ + struct cytp_data *cytp; + + cytp = kzalloc(sizeof(struct cytp_data), GFP_KERNEL); + if (!cytp) + return -ENOMEM; + + psmouse->private = cytp; + psmouse->pktsize = 8; + + cypress_reset(psmouse); + + if (cypress_query_hardware(psmouse)) { + psmouse_err(psmouse, "Unable to query Trackpad hardware.\n"); + goto err_exit; + } + + if (cypress_set_absolute_mode(psmouse)) { + psmouse_err(psmouse, "init: Unable to initialize Cypress absolute mode.\n"); + goto err_exit; + } + + if (cypress_set_input_params(psmouse->dev, cytp) < 0) { + psmouse_err(psmouse, "init: Unable to set input params.\n"); + goto err_exit; + } + + psmouse->model = 1; + psmouse->protocol_handler = cypress_protocol_handler; + psmouse->set_rate = cypress_set_rate; + psmouse->disconnect = cypress_disconnect; + psmouse->reconnect = cypress_reconnect; + psmouse->cleanup = cypress_reset; + psmouse->resync_time = 0; + + return 0; + +err_exit: + /* + * Reset Cypress Trackpad as a standard mouse. Then + * let psmouse driver commmunicating with it as default PS2 mouse. + */ + cypress_reset(psmouse); + + psmouse->private = NULL; + kfree(cytp); + + return -1; +} + +bool cypress_supported(void) +{ + return true; +} diff --git a/drivers/input/mouse/cypress_ps2.h b/drivers/input/mouse/cypress_ps2.h new file mode 100644 index 00000000000..4720f21d2d7 --- /dev/null +++ b/drivers/input/mouse/cypress_ps2.h @@ -0,0 +1,191 @@ +#ifndef _CYPRESS_PS2_H +#define _CYPRESS_PS2_H + +#include "psmouse.h" + +#define CMD_BITS_MASK 0x03 +#define COMPOSIT(x, s) (((x) & CMD_BITS_MASK) << (s)) + +#define ENCODE_CMD(aa, bb, cc, dd) \ + (COMPOSIT((aa), 6) | COMPOSIT((bb), 4) | COMPOSIT((cc), 2) | COMPOSIT((dd), 0)) +#define CYTP_CMD_ABS_NO_PRESSURE_MODE ENCODE_CMD(0, 1, 0, 0) +#define CYTP_CMD_ABS_WITH_PRESSURE_MODE ENCODE_CMD(0, 1, 0, 1) +#define CYTP_CMD_SMBUS_MODE ENCODE_CMD(0, 1, 1, 0) +#define CYTP_CMD_STANDARD_MODE ENCODE_CMD(0, 2, 0, 0) /* not implemented yet. */ +#define CYTP_CMD_CYPRESS_REL_MODE ENCODE_CMD(1, 1, 1, 1) /* not implemented yet. */ +#define CYTP_CMD_READ_CYPRESS_ID ENCODE_CMD(0, 0, 0, 0) +#define CYTP_CMD_READ_TP_METRICS ENCODE_CMD(0, 0, 0, 1) +#define CYTP_CMD_SET_HSCROLL_WIDTH(w) ENCODE_CMD(1, 1, 0, (w)) +#define CYTP_CMD_SET_HSCROLL_MASK ENCODE_CMD(1, 1, 0, 0) +#define CYTP_CMD_SET_VSCROLL_WIDTH(w) ENCODE_CMD(1, 2, 0, (w)) +#define CYTP_CMD_SET_VSCROLL_MASK ENCODE_CMD(1, 2, 0, 0) +#define CYTP_CMD_SET_PALM_GEOMETRY(e) ENCODE_CMD(1, 2, 1, (e)) +#define CYTP_CMD_PALM_GEMMETRY_MASK ENCODE_CMD(1, 2, 1, 0) +#define CYTP_CMD_SET_PALM_SENSITIVITY(s) ENCODE_CMD(1, 2, 2, (s)) +#define CYTP_CMD_PALM_SENSITIVITY_MASK ENCODE_CMD(1, 2, 2, 0) +#define CYTP_CMD_SET_MOUSE_SENSITIVITY(s) ENCODE_CMD(1, 3, ((s) >> 2), (s)) +#define CYTP_CMD_MOUSE_SENSITIVITY_MASK ENCODE_CMD(1, 3, 0, 0) +#define CYTP_CMD_REQUEST_BASELINE_STATUS ENCODE_CMD(2, 0, 0, 1) +#define CYTP_CMD_REQUEST_RECALIBRATION ENCODE_CMD(2, 0, 0, 3) + +#define DECODE_CMD_AA(x) (((x) >> 6) & CMD_BITS_MASK) +#define DECODE_CMD_BB(x) (((x) >> 4) & CMD_BITS_MASK) +#define DECODE_CMD_CC(x) (((x) >> 2) & CMD_BITS_MASK) +#define DECODE_CMD_DD(x) ((x) & CMD_BITS_MASK) + +/* Cypress trackpad working mode. */ +#define CYTP_BIT_ABS_PRESSURE (1 << 3) +#define CYTP_BIT_ABS_NO_PRESSURE (1 << 2) +#define CYTP_BIT_CYPRESS_REL (1 << 1) +#define CYTP_BIT_STANDARD_REL (1 << 0) +#define CYTP_BIT_REL_MASK (CYTP_BIT_CYPRESS_REL | CYTP_BIT_STANDARD_REL) +#define CYTP_BIT_ABS_MASK (CYTP_BIT_ABS_PRESSURE | CYTP_BIT_ABS_NO_PRESSURE) +#define CYTP_BIT_ABS_REL_MASK (CYTP_BIT_ABS_MASK | CYTP_BIT_REL_MASK) + +#define CYTP_BIT_HIGH_RATE (1 << 4) +/* + * report mode bit is set, firmware working in Remote Mode. + * report mode bit is cleared, firmware working in Stream Mode. + */ +#define CYTP_BIT_REPORT_MODE (1 << 5) + +/* scrolling width values for set HSCROLL and VSCROLL width command. */ +#define SCROLL_WIDTH_NARROW 1 +#define SCROLL_WIDTH_NORMAL 2 +#define SCROLL_WIDTH_WIDE 3 + +#define PALM_GEOMETRY_ENABLE 1 +#define PALM_GEOMETRY_DISABLE 0 + +#define TP_METRICS_MASK 0x80 +#define FW_VERSION_MASX 0x7f +#define FW_VER_HIGH_MASK 0x70 +#define FW_VER_LOW_MASK 0x0f + +/* Times to retry a ps2_command and millisecond delay between tries. */ +#define CYTP_PS2_CMD_TRIES 3 +#define CYTP_PS2_CMD_DELAY 500 + +/* time out for PS/2 command only in milliseconds. */ +#define CYTP_CMD_TIMEOUT 200 +#define CYTP_DATA_TIMEOUT 30 + +#define CYTP_EXT_CMD 0xe8 +#define CYTP_PS2_RETRY 0xfe +#define CYTP_PS2_ERROR 0xfc + +#define CYTP_RESP_RETRY 0x01 +#define CYTP_RESP_ERROR 0xfe + + +#define CYTP_105001_WIDTH 97 /* Dell XPS 13 */ +#define CYTP_105001_HIGH 59 +#define CYTP_DEFAULT_WIDTH (CYTP_105001_WIDTH) +#define CYTP_DEFAULT_HIGH (CYTP_105001_HIGH) + +#define CYTP_ABS_MAX_X 1600 +#define CYTP_ABS_MAX_Y 900 +#define CYTP_MAX_PRESSURE 255 +#define CYTP_MIN_PRESSURE 0 + +/* header byte bits of relative package. */ +#define BTN_LEFT_BIT 0x01 +#define BTN_RIGHT_BIT 0x02 +#define BTN_MIDDLE_BIT 0x04 +#define REL_X_SIGN_BIT 0x10 +#define REL_Y_SIGN_BIT 0x20 + +/* header byte bits of absolute package. */ +#define ABS_VSCROLL_BIT 0x10 +#define ABS_HSCROLL_BIT 0x20 +#define ABS_MULTIFINGER_TAP 0x04 +#define ABS_EDGE_MOTION_MASK 0x80 + +#define DFLT_RESP_BITS_VALID 0x88 /* SMBus bit should not be set. */ +#define DFLT_RESP_SMBUS_BIT 0x80 +#define DFLT_SMBUS_MODE 0x80 +#define DFLT_PS2_MODE 0x00 +#define DFLT_RESP_BIT_MODE 0x40 +#define DFLT_RESP_REMOTE_MODE 0x40 +#define DFLT_RESP_STREAM_MODE 0x00 +#define DFLT_RESP_BIT_REPORTING 0x20 +#define DFLT_RESP_BIT_SCALING 0x10 + +#define TP_METRICS_BIT_PALM 0x80 +#define TP_METRICS_BIT_STUBBORN 0x40 +#define TP_METRICS_BIT_2F_JITTER 0x30 +#define TP_METRICS_BIT_1F_JITTER 0x0c +#define TP_METRICS_BIT_APA 0x02 +#define TP_METRICS_BIT_MTG 0x01 +#define TP_METRICS_BIT_ABS_PKT_FORMAT_SET 0xf0 +#define TP_METRICS_BIT_2F_SPIKE 0x0c +#define TP_METRICS_BIT_1F_SPIKE 0x03 + +/* bits of first byte response of E9h-Status Request command. */ +#define RESP_BTN_RIGHT_BIT 0x01 +#define RESP_BTN_MIDDLE_BIT 0x02 +#define RESP_BTN_LEFT_BIT 0x04 +#define RESP_SCALING_BIT 0x10 +#define RESP_ENABLE_BIT 0x20 +#define RESP_REMOTE_BIT 0x40 +#define RESP_SMBUS_BIT 0x80 + +#define CYTP_MAX_MT_SLOTS 2 + +struct cytp_contact { + int x; + int y; + int z; /* also named as touch pressure. */ +}; + +/* The structure of Cypress Trackpad event data. */ +struct cytp_report_data { + int contact_cnt; + struct cytp_contact contacts[CYTP_MAX_MT_SLOTS]; + unsigned int left:1; + unsigned int right:1; + unsigned int middle:1; + unsigned int tap:1; /* multi-finger tap detected. */ +}; + +/* The structure of Cypress Trackpad device private data. */ +struct cytp_data { + int fw_version; + + int pkt_size; + int mode; + + int tp_min_pressure; + int tp_max_pressure; + int tp_width; /* X direction physical size in mm. */ + int tp_high; /* Y direction physical size in mm. */ + int tp_max_abs_x; /* Max X absolute units that can be reported. */ + int tp_max_abs_y; /* Max Y absolute units that can be reported. */ + + int tp_res_x; /* X resolution in units/mm. */ + int tp_res_y; /* Y resolution in units/mm. */ + + int tp_metrics_supported; +}; + + +#ifdef CONFIG_MOUSE_PS2_CYPRESS +int cypress_detect(struct psmouse *psmouse, bool set_properties); +int cypress_init(struct psmouse *psmouse); +bool cypress_supported(void); +#else +inline int cypress_detect(struct psmouse *psmouse, bool set_properties) +{ + return -ENOSYS; +} +inline int cypress_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +inline bool cypress_supported(void) +{ + return 0; +} +#endif /* CONFIG_MOUSE_PS2_CYPRESS */ + +#endif /* _CYPRESS_PS2_H */ diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 04d9bf320a4..ee2a04d90d2 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -10,12 +10,12 @@ * Trademarks are the property of their respective owners. */ -#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt - #include <linux/delay.h> +#include <linux/dmi.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/input.h> +#include <linux/input/mt.h> #include <linux/serio.h> #include <linux/libps2.h> #include "psmouse.h" @@ -24,13 +24,10 @@ #define elantech_debug(fmt, ...) \ do { \ if (etd->debug) \ - printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ + psmouse_printk(KERN_DEBUG, psmouse, \ + fmt, ##__VA_ARGS__); \ } while (0) -static bool force_elantech; -module_param_named(force_elantech, force_elantech, bool, 0644); -MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default)."); - /* * Send a Synaptics style sliced query command */ @@ -39,7 +36,25 @@ static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, { if (psmouse_sliced_command(psmouse, c) || ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { - pr_err("synaptics_send_cmd query 0x%02x failed.\n", c); + psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c); + return -1; + } + + return 0; +} + +/* + * V3 and later support this fast command + */ +static int elantech_send_cmd(struct psmouse *psmouse, unsigned char c, + unsigned char *param) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + + if (ps2_command(ps2dev, NULL, ETP_PS2_CUSTOM_COMMAND) || + ps2_command(ps2dev, NULL, c) || + ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { + psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c); return -1; } @@ -68,7 +83,7 @@ static int elantech_ps2_command(struct psmouse *psmouse, } while (tries > 0); if (rc) - pr_err("ps2 command 0x%02x failed.\n", command); + psmouse_err(psmouse, "ps2 command 0x%02x failed.\n", command); return rc; } @@ -83,7 +98,7 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, unsigned char param[3]; int rc = 0; - if (reg < 0x10 || reg > 0x26) + if (reg < 0x07 || reg > 0x26) return -1; if (reg > 0x11 && reg < 0x20) @@ -107,12 +122,24 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, rc = -1; } break; + + case 3 ... 4: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) { + rc = -1; + } + break; } if (rc) - pr_err("failed to read register 0x%02x.\n", reg); - else + psmouse_err(psmouse, "failed to read register 0x%02x.\n", reg); + else if (etd->hw_version != 4) *val = param[0]; + else + *val = param[1]; return rc; } @@ -126,7 +153,7 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, struct elantech_data *etd = psmouse->private; int rc = 0; - if (reg < 0x10 || reg > 0x26) + if (reg < 0x07 || reg > 0x26) return -1; if (reg > 0x11 && reg < 0x20) @@ -153,11 +180,38 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, rc = -1; } break; + + case 3: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, val) || + elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; + + case 4: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, val) || + elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; } if (rc) - pr_err("failed to write register 0x%02x with value 0x%02x.\n", - reg, val); + psmouse_err(psmouse, + "failed to write register 0x%02x with value 0x%02x.\n", + reg, val); return rc; } @@ -165,13 +219,13 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, /* * Dump a complete mouse movement packet to the syslog */ -static void elantech_packet_dump(unsigned char *packet, int size) +static void elantech_packet_dump(struct psmouse *psmouse) { int i; - printk(KERN_DEBUG pr_fmt("PS/2 packet [")); - for (i = 0; i < size; i++) - printk("%s0x%02x ", (i) ? ", " : " ", packet[i]); + psmouse_printk(KERN_DEBUG, psmouse, "PS/2 packet ["); + for (i = 0; i < psmouse->pktsize; i++) + printk("%s0x%02x ", i ? ", " : " ", psmouse->packet[i]); printk("]\n"); } @@ -222,7 +276,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) input_report_abs(dev, ABS_X, ((packet[1] & 0x0c) << 6) | packet[2]); input_report_abs(dev, ABS_Y, - ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3])); + etd->y_max - (((packet[1] & 0x03) << 8) | packet[3])); } input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); @@ -232,7 +286,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); if (etd->fw_version < 0x020000 && - (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) { /* rocker up */ input_report_key(dev, BTN_FORWARD, packet[0] & 0x40); /* rocker down */ @@ -242,19 +296,41 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) input_sync(dev); } +static void elantech_set_slot(struct input_dev *dev, int slot, bool active, + unsigned int x, unsigned int y) +{ + input_mt_slot(dev, slot); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); + if (active) { + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + } +} + +/* x1 < x2 and y1 < y2 when two fingers, x = y = 0 when not pressed */ +static void elantech_report_semi_mt_data(struct input_dev *dev, + unsigned int num_fingers, + unsigned int x1, unsigned int y1, + unsigned int x2, unsigned int y2) +{ + elantech_set_slot(dev, 0, num_fingers != 0, x1, y1); + elantech_set_slot(dev, 1, num_fingers == 2, x2, y2); +} + /* * Interpret complete data packets and report absolute mode input events for * hardware version 2. (6 byte packets) */ static void elantech_report_absolute_v2(struct psmouse *psmouse) { + struct elantech_data *etd = psmouse->private; struct input_dev *dev = psmouse->dev; unsigned char *packet = psmouse->packet; - int fingers, x1, y1, x2, y2; + unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0; + unsigned int width = 0, pres = 0; /* byte 0: n1 n0 . . . . R L */ fingers = (packet[0] & 0xc0) >> 6; - input_report_key(dev, BTN_TOUCH, fingers != 0); switch (fingers) { case 3: @@ -267,17 +343,18 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) /* pass through... */ case 1: /* - * byte 1: . . . . . x10 x9 x8 + * byte 1: . . . . x11 x10 x9 x8 * byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */ - input_report_abs(dev, ABS_X, - ((packet[1] & 0x07) << 8) | packet[2]); + x1 = ((packet[1] & 0x0f) << 8) | packet[2]; /* - * byte 4: . . . . . . y9 y8 + * byte 4: . . . . y11 y10 y9 y8 * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ - input_report_abs(dev, ABS_Y, - ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5])); + y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); + + pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); + width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4); break; case 2: @@ -287,44 +364,261 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) * byte 0: . . ay8 ax8 . . . . * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */ - x1 = ((packet[0] & 0x10) << 4) | packet[1]; + x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2; /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */ - y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]); + y1 = etd->y_max - + ((((packet[0] & 0x20) << 3) | packet[2]) << 2); /* * byte 3: . . by8 bx8 . . . . * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */ - x2 = ((packet[3] & 0x10) << 4) | packet[4]; + x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2; /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */ - y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]); + y2 = etd->y_max - + ((((packet[3] & 0x20) << 3) | packet[5]) << 2); + + /* Unknown so just report sensible values */ + pres = 127; + width = 7; + break; + } + + input_report_key(dev, BTN_TOUCH, fingers != 0); + if (fingers != 0) { + input_report_abs(dev, ABS_X, x1); + input_report_abs(dev, ABS_Y, y1); + } + elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4); + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + if (etd->reports_pressure) { + input_report_abs(dev, ABS_PRESSURE, pres); + input_report_abs(dev, ABS_TOOL_WIDTH, width); + } + + input_sync(dev); +} + +/* + * Interpret complete data packets and report absolute mode input events for + * hardware version 3. (12 byte packets for two fingers) + */ +static void elantech_report_absolute_v3(struct psmouse *psmouse, + int packet_type) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0; + unsigned int width = 0, pres = 0; + + /* byte 0: n1 n0 . . . . R L */ + fingers = (packet[0] & 0xc0) >> 6; + + switch (fingers) { + case 3: + case 1: /* - * For compatibility with the X Synaptics driver scale up - * one coordinate and report as ordinary mouse movent + * byte 1: . . . . x11 x10 x9 x8 + * byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */ - input_report_abs(dev, ABS_X, x1 << 2); - input_report_abs(dev, ABS_Y, y1 << 2); + x1 = ((packet[1] & 0x0f) << 8) | packet[2]; /* - * For compatibility with the proprietary X Elantech driver - * report both coordinates as hat coordinates + * byte 4: . . . . y11 y10 y9 y8 + * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ - input_report_abs(dev, ABS_HAT0X, x1); - input_report_abs(dev, ABS_HAT0Y, y1); - input_report_abs(dev, ABS_HAT1X, x2); - input_report_abs(dev, ABS_HAT1Y, y2); + y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); + break; + + case 2: + if (packet_type == PACKET_V3_HEAD) { + /* + * byte 1: . . . . ax11 ax10 ax9 ax8 + * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 + */ + etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2]; + /* + * byte 4: . . . . ay11 ay10 ay9 ay8 + * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 + */ + etd->mt[0].y = etd->y_max - + (((packet[4] & 0x0f) << 8) | packet[5]); + /* + * wait for next packet + */ + return; + } + + /* packet_type == PACKET_V3_TAIL */ + x1 = etd->mt[0].x; + y1 = etd->mt[0].y; + x2 = ((packet[1] & 0x0f) << 8) | packet[2]; + y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); break; } + pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); + width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4); + + input_report_key(dev, BTN_TOUCH, fingers != 0); + if (fingers != 0) { + input_report_abs(dev, ABS_X, x1); + input_report_abs(dev, ABS_Y, y1); + } + elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); - input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4); - input_report_key(dev, BTN_LEFT, packet[0] & 0x01); - input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + + /* For clickpads map both buttons to BTN_LEFT */ + if (etd->fw_version & 0x001000) { + input_report_key(dev, BTN_LEFT, packet[0] & 0x03); + } else { + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + } + + input_report_abs(dev, ABS_PRESSURE, pres); + input_report_abs(dev, ABS_TOOL_WIDTH, width); input_sync(dev); } -static int elantech_check_parity_v1(struct psmouse *psmouse) +static void elantech_input_sync_v4(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + + /* For clickpads map both buttons to BTN_LEFT */ + if (etd->fw_version & 0x001000) { + input_report_key(dev, BTN_LEFT, packet[0] & 0x03); + } else { + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + } + + input_mt_report_pointer_emulation(dev, true); + input_sync(dev); +} + +static void process_packet_status_v4(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + unsigned char *packet = psmouse->packet; + unsigned fingers; + int i; + + /* notify finger state change */ + fingers = packet[1] & 0x1f; + for (i = 0; i < ETP_MAX_FINGERS; i++) { + if ((fingers & (1 << i)) == 0) { + input_mt_slot(dev, i); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, false); + } + } + + elantech_input_sync_v4(psmouse); +} + +static void process_packet_head_v4(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + int id = ((packet[3] & 0xe0) >> 5) - 1; + int pres, traces; + + if (id < 0) + return; + + etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2]; + etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); + pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); + traces = (packet[0] & 0xf0) >> 4; + + input_mt_slot(dev, id); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, true); + + input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x); + input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y); + input_report_abs(dev, ABS_MT_PRESSURE, pres); + input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width); + /* report this for backwards compatibility */ + input_report_abs(dev, ABS_TOOL_WIDTH, traces); + + elantech_input_sync_v4(psmouse); +} + +static void process_packet_motion_v4(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0; + int id, sid; + + id = ((packet[0] & 0xe0) >> 5) - 1; + if (id < 0) + return; + + sid = ((packet[3] & 0xe0) >> 5) - 1; + weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1; + /* + * Motion packets give us the delta of x, y values of specific fingers, + * but in two's complement. Let the compiler do the conversion for us. + * Also _enlarge_ the numbers to int, in case of overflow. + */ + delta_x1 = (signed char)packet[1]; + delta_y1 = (signed char)packet[2]; + delta_x2 = (signed char)packet[4]; + delta_y2 = (signed char)packet[5]; + + etd->mt[id].x += delta_x1 * weight; + etd->mt[id].y -= delta_y1 * weight; + input_mt_slot(dev, id); + input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x); + input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y); + + if (sid >= 0) { + etd->mt[sid].x += delta_x2 * weight; + etd->mt[sid].y -= delta_y2 * weight; + input_mt_slot(dev, sid); + input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x); + input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y); + } + + elantech_input_sync_v4(psmouse); +} + +static void elantech_report_absolute_v4(struct psmouse *psmouse, + int packet_type) +{ + switch (packet_type) { + case PACKET_V4_STATUS: + process_packet_status_v4(psmouse); + break; + + case PACKET_V4_HEAD: + process_packet_head_v4(psmouse); + break; + + case PACKET_V4_MOTION: + process_packet_motion_v4(psmouse); + break; + + case PACKET_UNKNOWN: + default: + /* impossible to get here */ + break; + } +} + +static int elantech_packet_check_v1(struct psmouse *psmouse) { struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; @@ -348,31 +642,172 @@ static int elantech_check_parity_v1(struct psmouse *psmouse) etd->parity[packet[3]] == p3; } +static int elantech_debounce_check_v2(struct psmouse *psmouse) +{ + /* + * When we encounter packet that matches this exactly, it means the + * hardware is in debounce status. Just ignore the whole packet. + */ + const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff, 0xff }; + unsigned char *packet = psmouse->packet; + + return !memcmp(packet, debounce_packet, sizeof(debounce_packet)); +} + +static int elantech_packet_check_v2(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + + /* + * V2 hardware has two flavors. Older ones that do not report pressure, + * and newer ones that reports pressure and width. With newer ones, all + * packets (1, 2, 3 finger touch) have the same constant bits. With + * older ones, 1/3 finger touch packets and 2 finger touch packets + * have different constant bits. + * With all three cases, if the constant bits are not exactly what I + * expected, I consider them invalid. + */ + if (etd->reports_pressure) + return (packet[0] & 0x0c) == 0x04 && + (packet[3] & 0x0f) == 0x02; + + if ((packet[0] & 0xc0) == 0x80) + return (packet[0] & 0x0c) == 0x0c && + (packet[3] & 0x0e) == 0x08; + + return (packet[0] & 0x3c) == 0x3c && + (packet[1] & 0xf0) == 0x00 && + (packet[3] & 0x3e) == 0x38 && + (packet[4] & 0xf0) == 0x00; +} + +/* + * We check the constant bits to determine what packet type we get, + * so packet checking is mandatory for v3 and later hardware. + */ +static int elantech_packet_check_v3(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff }; + unsigned char *packet = psmouse->packet; + + /* + * check debounce first, it has the same signature in byte 0 + * and byte 3 as PACKET_V3_HEAD. + */ + if (!memcmp(packet, debounce_packet, sizeof(debounce_packet))) + return PACKET_DEBOUNCE; + + /* + * If the hardware flag 'crc_enabled' is set the packets have + * different signatures. + */ + if (etd->crc_enabled) { + if ((packet[3] & 0x09) == 0x08) + return PACKET_V3_HEAD; + + if ((packet[3] & 0x09) == 0x09) + return PACKET_V3_TAIL; + } else { + if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02) + return PACKET_V3_HEAD; + + if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c) + return PACKET_V3_TAIL; + } + + return PACKET_UNKNOWN; +} + +static int elantech_packet_check_v4(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + unsigned char packet_type = packet[3] & 0x03; + bool sanity_check; + + /* + * Sanity check based on the constant bits of a packet. + * The constant bits change depending on the value of + * the hardware flag 'crc_enabled' but are the same for + * every packet, regardless of the type. + */ + if (etd->crc_enabled) + sanity_check = ((packet[3] & 0x08) == 0x00); + else + sanity_check = ((packet[0] & 0x0c) == 0x04 && + (packet[3] & 0x1c) == 0x10); + + if (!sanity_check) + return PACKET_UNKNOWN; + + switch (packet_type) { + case 0: + return PACKET_V4_STATUS; + + case 1: + return PACKET_V4_HEAD; + + case 2: + return PACKET_V4_MOTION; + } + + return PACKET_UNKNOWN; +} + /* * Process byte stream from mouse and handle complete packets */ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) { struct elantech_data *etd = psmouse->private; + int packet_type; if (psmouse->pktcnt < psmouse->pktsize) return PSMOUSE_GOOD_DATA; if (etd->debug > 1) - elantech_packet_dump(psmouse->packet, psmouse->pktsize); + elantech_packet_dump(psmouse); switch (etd->hw_version) { case 1: - if (etd->paritycheck && !elantech_check_parity_v1(psmouse)) + if (etd->paritycheck && !elantech_packet_check_v1(psmouse)) return PSMOUSE_BAD_DATA; elantech_report_absolute_v1(psmouse); break; case 2: - /* We don't know how to check parity in protocol v2 */ + /* ignore debounce */ + if (elantech_debounce_check_v2(psmouse)) + return PSMOUSE_FULL_PACKET; + + if (etd->paritycheck && !elantech_packet_check_v2(psmouse)) + return PSMOUSE_BAD_DATA; + elantech_report_absolute_v2(psmouse); break; + + case 3: + packet_type = elantech_packet_check_v3(psmouse); + /* ignore debounce */ + if (packet_type == PACKET_DEBOUNCE) + return PSMOUSE_FULL_PACKET; + + if (packet_type == PACKET_UNKNOWN) + return PSMOUSE_BAD_DATA; + + elantech_report_absolute_v3(psmouse, packet_type); + break; + + case 4: + packet_type = elantech_packet_check_v4(psmouse); + if (packet_type == PACKET_UNKNOWN) + return PSMOUSE_BAD_DATA; + + elantech_report_absolute_v4(psmouse, packet_type); + break; } return PSMOUSE_FULL_PACKET; @@ -407,15 +842,33 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) elantech_write_reg(psmouse, 0x11, etd->reg_11) || elantech_write_reg(psmouse, 0x21, etd->reg_21)) { rc = -1; - break; } + break; + + case 3: + if (etd->set_hw_resolution) + etd->reg_10 = 0x0b; + else + etd->reg_10 = 0x01; + + if (elantech_write_reg(psmouse, 0x10, etd->reg_10)) + rc = -1; + + break; + + case 4: + etd->reg_07 = 0x01; + if (elantech_write_reg(psmouse, 0x07, etd->reg_07)) + rc = -1; + + goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */ } if (rc == 0) { /* * Read back reg 0x10. For hardware version 1 we must make * sure the absolute mode bit is set. For hardware version 2 - * the touchpad is probably initalising and not ready until + * the touchpad is probably initializing and not ready until * we read back the value we just wrote. */ do { @@ -428,28 +881,180 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) } while (tries > 0); if (rc) { - pr_err("failed to read back register 0x10.\n"); + psmouse_err(psmouse, + "failed to read back register 0x10.\n"); } else if (etd->hw_version == 1 && !(val & ETP_R10_ABSOLUTE_MODE)) { - pr_err("touchpad refuses to switch to absolute mode.\n"); + psmouse_err(psmouse, + "touchpad refuses to switch to absolute mode.\n"); rc = -1; } } + skip_readback_reg_10: if (rc) - pr_err("failed to initialise registers.\n"); + psmouse_err(psmouse, "failed to initialise registers.\n"); return rc; } +static int elantech_set_range(struct psmouse *psmouse, + unsigned int *x_min, unsigned int *y_min, + unsigned int *x_max, unsigned int *y_max, + unsigned int *width) +{ + struct elantech_data *etd = psmouse->private; + unsigned char param[3]; + unsigned char traces; + + switch (etd->hw_version) { + case 1: + *x_min = ETP_XMIN_V1; + *y_min = ETP_YMIN_V1; + *x_max = ETP_XMAX_V1; + *y_max = ETP_YMAX_V1; + break; + + case 2: + if (etd->fw_version == 0x020800 || + etd->fw_version == 0x020b00 || + etd->fw_version == 0x020030) { + *x_min = ETP_XMIN_V2; + *y_min = ETP_YMIN_V2; + *x_max = ETP_XMAX_V2; + *y_max = ETP_YMAX_V2; + } else { + int i; + int fixed_dpi; + + i = (etd->fw_version > 0x020800 && + etd->fw_version < 0x020900) ? 1 : 2; + + if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param)) + return -1; + + fixed_dpi = param[1] & 0x10; + + if (((etd->fw_version >> 16) == 0x14) && fixed_dpi) { + if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, param)) + return -1; + + *x_max = (etd->capabilities[1] - i) * param[1] / 2; + *y_max = (etd->capabilities[2] - i) * param[2] / 2; + } else if (etd->fw_version == 0x040216) { + *x_max = 819; + *y_max = 405; + } else if (etd->fw_version == 0x040219 || etd->fw_version == 0x040215) { + *x_max = 900; + *y_max = 500; + } else { + *x_max = (etd->capabilities[1] - i) * 64; + *y_max = (etd->capabilities[2] - i) * 64; + } + } + break; + + case 3: + if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param)) + return -1; + + *x_max = (0x0f & param[0]) << 8 | param[1]; + *y_max = (0xf0 & param[0]) << 4 | param[2]; + break; + + case 4: + if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param)) + return -1; + + *x_max = (0x0f & param[0]) << 8 | param[1]; + *y_max = (0xf0 & param[0]) << 4 | param[2]; + traces = etd->capabilities[1]; + if ((traces < 2) || (traces > *x_max)) + return -1; + + *width = *x_max / (traces - 1); + break; + } + + return 0; +} + +/* + * (value from firmware) * 10 + 790 = dpi + * we also have to convert dpi to dots/mm (*10/254 to avoid floating point) + */ +static unsigned int elantech_convert_res(unsigned int val) +{ + return (val * 10 + 790) * 10 / 254; +} + +static int elantech_get_resolution_v4(struct psmouse *psmouse, + unsigned int *x_res, + unsigned int *y_res) +{ + unsigned char param[3]; + + if (elantech_send_cmd(psmouse, ETP_RESOLUTION_QUERY, param)) + return -1; + + *x_res = elantech_convert_res(param[1] & 0x0f); + *y_res = elantech_convert_res((param[1] & 0xf0) >> 4); + + return 0; +} + +/* + * Advertise INPUT_PROP_BUTTONPAD for clickpads. The testing of bit 12 in + * fw_version for this is based on the following fw_version & caps table: + * + * Laptop-model: fw_version: caps: buttons: + * Acer S3 0x461f00 10, 13, 0e clickpad + * Acer S7-392 0x581f01 50, 17, 0d clickpad + * Acer V5-131 0x461f02 01, 16, 0c clickpad + * Acer V5-551 0x461f00 ? clickpad + * Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons + * Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons + * Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons + * Asus UX31 0x361f00 20, 15, 0e clickpad + * Asus UX32VD 0x361f02 00, 15, 0e clickpad + * Avatar AVIU-145A2 0x361f00 ? clickpad + * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons + * Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*) + * Samsung NF210 0x150b00 78, 14, 0a 2 hw buttons + * Samsung NP770Z5E 0x575f01 10, 15, 0f clickpad + * Samsung NP700Z5B 0x361f06 21, 15, 0f clickpad + * Samsung NP900X3E-A02 0x575f03 ? clickpad + * Samsung NP-QX410 0x851b00 19, 14, 0c clickpad + * Samsung RC512 0x450f00 08, 15, 0c 2 hw buttons + * Samsung RF710 0x450f00 ? 2 hw buttons + * System76 Pangolin 0x250f01 ? 2 hw buttons + * (*) + 3 trackpoint buttons + */ +static void elantech_set_buttonpad_prop(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + + if (etd->fw_version & 0x001000) { + __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); + __clear_bit(BTN_RIGHT, dev->keybit); + } +} + /* * Set the appropriate event bits for the input subsystem */ -static void elantech_set_input_params(struct psmouse *psmouse) +static int elantech_set_input_params(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; struct elantech_data *etd = psmouse->private; + unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0; + unsigned int x_res = 0, y_res = 0; + + if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width)) + return -1; + __set_bit(INPUT_PROP_POINTER, dev->propbit); __set_bit(EV_KEY, dev->evbit); __set_bit(EV_ABS, dev->evbit); __clear_bit(EV_REL, dev->evbit); @@ -466,24 +1071,78 @@ static void elantech_set_input_params(struct psmouse *psmouse) case 1: /* Rocker button */ if (etd->fw_version < 0x020000 && - (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) { __set_bit(BTN_FORWARD, dev->keybit); __set_bit(BTN_BACK, dev->keybit); } - input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0); - input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0); + input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); break; case 2: __set_bit(BTN_TOOL_QUADTAP, dev->keybit); - input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0); - input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0); - input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0); - input_set_abs_params(dev, ABS_HAT0Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0); - input_set_abs_params(dev, ABS_HAT1X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0); - input_set_abs_params(dev, ABS_HAT1Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0); + __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); + /* fall through */ + case 3: + if (etd->hw_version == 3) + elantech_set_buttonpad_prop(psmouse); + input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); + if (etd->reports_pressure) { + input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2, + ETP_PMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, + ETP_WMAX_V2, 0, 0); + } + input_mt_init_slots(dev, 2, 0); + input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); + break; + + case 4: + if (elantech_get_resolution_v4(psmouse, &x_res, &y_res)) { + /* + * if query failed, print a warning and leave the values + * zero to resemble synaptics.c behavior. + */ + psmouse_warn(psmouse, "couldn't query resolution data.\n"); + } + elantech_set_buttonpad_prop(psmouse); + __set_bit(BTN_TOOL_QUADTAP, dev->keybit); + /* For X to recognize me as touchpad. */ + input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); + input_abs_set_res(dev, ABS_X, x_res); + input_abs_set_res(dev, ABS_Y, y_res); + /* + * range of pressure and width is the same as v2, + * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility. + */ + input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2, + ETP_PMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, + ETP_WMAX_V2, 0, 0); + /* Multitouch capable pad, up to 5 fingers. */ + input_mt_init_slots(dev, ETP_MAX_FINGERS, 0); + input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); + input_abs_set_res(dev, ABS_MT_POSITION_X, x_res); + input_abs_set_res(dev, ABS_MT_POSITION_Y, y_res); + input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2, + ETP_PMAX_V2, 0, 0); + /* + * The firmware reports how many trace lines the finger spans, + * convert to surface unit as Protocol-B requires. + */ + input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0, + ETP_WMAX_V2 * width, 0, 0); break; } + + etd->y_max = y_max; + etd->width = width; + + return 0; } struct elantech_attr_data { @@ -517,16 +1176,13 @@ static ssize_t elantech_set_int_attr(struct psmouse *psmouse, struct elantech_data *etd = psmouse->private; struct elantech_attr_data *attr = data; unsigned char *reg = (unsigned char *) etd + attr->field_offset; - unsigned long value; + unsigned char value; int err; - err = strict_strtoul(buf, 16, &value); + err = kstrtou8(buf, 16, &value); if (err) return err; - if (value > 0xff) - return -EINVAL; - /* Do we need to preserve some bits for version 2 hardware too? */ if (etd->hw_version == 1) { if (attr->reg == 0x10) @@ -553,6 +1209,7 @@ static ssize_t elantech_set_int_attr(struct psmouse *psmouse, elantech_show_int_attr, \ elantech_set_int_attr) +ELANTECH_INT_ATTR(reg_07, 0x07); ELANTECH_INT_ATTR(reg_10, 0x10); ELANTECH_INT_ATTR(reg_11, 0x11); ELANTECH_INT_ATTR(reg_20, 0x20); @@ -566,6 +1223,7 @@ ELANTECH_INT_ATTR(debug, 0); ELANTECH_INT_ATTR(paritycheck, 0); static struct attribute *elantech_attrs[] = { + &psmouse_attr_reg_07.dattr.attr, &psmouse_attr_reg_10.dattr.attr, &psmouse_attr_reg_11.dattr.attr, &psmouse_attr_reg_20.dattr.attr, @@ -617,7 +1275,7 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties) ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { - pr_debug("sending Elantech magic knock failed.\n"); + psmouse_dbg(psmouse, "sending Elantech magic knock failed.\n"); return -1; } @@ -625,9 +1283,11 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties) * Report this in case there are Elantech models that use a different * set of magic numbers */ - if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) { - pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n", - param[0], param[1], param[2]); + if (param[0] != 0x3c || param[1] != 0x03 || + (param[2] != 0xc8 && param[2] != 0x00)) { + psmouse_dbg(psmouse, + "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); return -1; } @@ -637,20 +1297,18 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties) * to Elantech magic knock and there might be more. */ if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { - pr_debug("failed to query firmware version.\n"); + psmouse_dbg(psmouse, "failed to query firmware version.\n"); return -1; } - pr_debug("Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n", - param[0], param[1], param[2]); + psmouse_dbg(psmouse, + "Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); if (!elantech_is_signature_valid(param)) { - if (!force_elantech) { - pr_debug("Probably not a real Elantech touchpad. Aborting.\n"); - return -1; - } - - pr_debug("Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n"); + psmouse_dbg(psmouse, + "Probably not a real Elantech touchpad. Aborting.\n"); + return -1; } if (set_properties) { @@ -677,11 +1335,14 @@ static void elantech_disconnect(struct psmouse *psmouse) */ static int elantech_reconnect(struct psmouse *psmouse) { + psmouse_reset(psmouse); + if (elantech_detect(psmouse, 0)) return -1; if (elantech_set_absolute_mode(psmouse)) { - pr_err("failed to put touchpad back into absolute mode.\n"); + psmouse_err(psmouse, + "failed to put touchpad back into absolute mode.\n"); return -1; } @@ -689,6 +1350,89 @@ static int elantech_reconnect(struct psmouse *psmouse) } /* + * Some hw_version 3 models go into error state when we try to set + * bit 3 and/or bit 1 of r10. + */ +static const struct dmi_system_id no_hw_res_dmi_table[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + /* Gigabyte U2442 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "U2442"), + }, + }, +#endif + { } +}; + +/* + * determine hardware version and set some properties according to it. + */ +static int elantech_set_properties(struct elantech_data *etd) +{ + /* This represents the version of IC body. */ + int ver = (etd->fw_version & 0x0f0000) >> 16; + + /* Early version of Elan touchpads doesn't obey the rule. */ + if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600) + etd->hw_version = 1; + else { + switch (ver) { + case 2: + case 4: + etd->hw_version = 2; + break; + case 5: + etd->hw_version = 3; + break; + case 6: + case 7: + case 8: + case 9: + etd->hw_version = 4; + break; + default: + return -1; + } + } + + /* decide which send_cmd we're gonna use early */ + etd->send_cmd = etd->hw_version >= 3 ? elantech_send_cmd : + synaptics_send_cmd; + + /* Turn on packet checking by default */ + etd->paritycheck = 1; + + /* + * This firmware suffers from misreporting coordinates when + * a touch action starts causing the mouse cursor or scrolled page + * to jump. Enable a workaround. + */ + etd->jumpy_cursor = + (etd->fw_version == 0x020022 || etd->fw_version == 0x020600); + + if (etd->hw_version > 1) { + /* For now show extra debug information */ + etd->debug = 1; + + if (etd->fw_version >= 0x020800) + etd->reports_pressure = true; + } + + /* + * The signatures of v3 and v4 packets change depending on the + * value of this hardware flag. + */ + etd->crc_enabled = ((etd->fw_version & 0x4000) == 0x4000); + + /* Enable real hardware resolution on hw_version 3 ? */ + etd->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table); + + return 0; +} + +/* * Initialize the touchpad and create sysfs entries */ int elantech_init(struct psmouse *psmouse) @@ -701,6 +1445,8 @@ int elantech_init(struct psmouse *psmouse) if (!etd) return -ENOMEM; + psmouse_reset(psmouse); + etd->parity[0] = 1; for (i = 1; i < 256; i++) etd->parity[i] = etd->parity[i & (i - 1)] ^ 1; @@ -709,66 +1455,53 @@ int elantech_init(struct psmouse *psmouse) * Do the version query again so we can store the result */ if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { - pr_err("failed to query firmware version.\n"); + psmouse_err(psmouse, "failed to query firmware version.\n"); goto init_fail; } - etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2]; - /* - * Assume every version greater than this is new EeePC style - * hardware with 6 byte packets - */ - if (etd->fw_version >= 0x020030) { - etd->hw_version = 2; - /* For now show extra debug information */ - etd->debug = 1; - /* Don't know how to do parity checking for version 2 */ - etd->paritycheck = 0; - } else { - etd->hw_version = 1; - etd->paritycheck = 1; - } - - pr_info("assuming hardware version %d, firmware version %d.%d.%d\n", - etd->hw_version, param[0], param[1], param[2]); - - if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) { - pr_err("failed to query capabilities.\n"); + if (elantech_set_properties(etd)) { + psmouse_err(psmouse, "unknown hardware version, aborting...\n"); goto init_fail; } - pr_info("Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n", - param[0], param[1], param[2]); - etd->capabilities = param[0]; + psmouse_info(psmouse, + "assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n", + etd->hw_version, param[0], param[1], param[2]); - /* - * This firmware suffers from misreporting coordinates when - * a touch action starts causing the mouse cursor or scrolled page - * to jump. Enable a workaround. - */ - if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) { - pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n"); - etd->jumpy_cursor = true; + if (etd->send_cmd(psmouse, ETP_CAPABILITIES_QUERY, + etd->capabilities)) { + psmouse_err(psmouse, "failed to query capabilities.\n"); + goto init_fail; } + psmouse_info(psmouse, + "Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n", + etd->capabilities[0], etd->capabilities[1], + etd->capabilities[2]); if (elantech_set_absolute_mode(psmouse)) { - pr_err("failed to put touchpad into absolute mode.\n"); + psmouse_err(psmouse, + "failed to put touchpad into absolute mode.\n"); goto init_fail; } - elantech_set_input_params(psmouse); + if (elantech_set_input_params(psmouse)) { + psmouse_err(psmouse, "failed to query touchpad range.\n"); + goto init_fail; + } error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, &elantech_attr_group); if (error) { - pr_err("failed to create sysfs attributes, error: %d.\n", error); + psmouse_err(psmouse, + "failed to create sysfs attributes, error: %d.\n", + error); goto init_fail; } psmouse->protocol_handler = elantech_process_byte; psmouse->disconnect = elantech_disconnect; psmouse->reconnect = elantech_reconnect; - psmouse->pktsize = etd->hw_version == 2 ? 6 : 4; + psmouse->pktsize = etd->hw_version > 1 ? 6 : 4; return 0; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index aa4aac5d219..9e0e2a1f340 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -16,14 +16,18 @@ /* * Command values for Synaptics style queries */ +#define ETP_FW_ID_QUERY 0x00 #define ETP_FW_VERSION_QUERY 0x01 #define ETP_CAPABILITIES_QUERY 0x02 +#define ETP_SAMPLE_QUERY 0x03 +#define ETP_RESOLUTION_QUERY 0x04 /* * Command values for register reading or writing */ #define ETP_REGISTER_READ 0x10 #define ETP_REGISTER_WRITE 0x11 +#define ETP_REGISTER_READWRITE 0x00 /* * Hardware version 2 custom PS/2 command value @@ -66,29 +70,51 @@ #define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1) /* - * It seems the resolution for hardware version 2 doubled. - * Hence the X and Y ranges are doubled too. - * The bezel around the pad also appears to be smaller + * The resolution for older v2 hardware doubled. + * (newer v2's firmware provides command so we can query) */ -#define ETP_EDGE_FUZZ_V2 8 +#define ETP_XMIN_V2 0 +#define ETP_XMAX_V2 1152 +#define ETP_YMIN_V2 0 +#define ETP_YMAX_V2 768 -#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) -#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2) -#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) -#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2) +#define ETP_PMIN_V2 0 +#define ETP_PMAX_V2 255 +#define ETP_WMIN_V2 0 +#define ETP_WMAX_V2 15 /* - * For two finger touches the coordinate of each finger gets reported - * separately but with reduced resolution. + * v3 hardware has 2 kinds of packet types, + * v4 hardware has 3. */ -#define ETP_2FT_FUZZ 4 +#define PACKET_UNKNOWN 0x01 +#define PACKET_DEBOUNCE 0x02 +#define PACKET_V3_HEAD 0x03 +#define PACKET_V3_TAIL 0x04 +#define PACKET_V4_HEAD 0x05 +#define PACKET_V4_MOTION 0x06 +#define PACKET_V4_STATUS 0x07 -#define ETP_2FT_XMIN ( 0 + ETP_2FT_FUZZ) -#define ETP_2FT_XMAX (288 - ETP_2FT_FUZZ) -#define ETP_2FT_YMIN ( 0 + ETP_2FT_FUZZ) -#define ETP_2FT_YMAX (192 - ETP_2FT_FUZZ) +/* + * track up to 5 fingers for v4 hardware + */ +#define ETP_MAX_FINGERS 5 + +/* + * weight value for v4 hardware + */ +#define ETP_WEIGHT_VALUE 5 + +/* + * The base position for one finger, v4 hardware + */ +struct finger_pos { + unsigned int x; + unsigned int y; +}; struct elantech_data { + unsigned char reg_07; unsigned char reg_10; unsigned char reg_11; unsigned char reg_20; @@ -99,13 +125,20 @@ struct elantech_data { unsigned char reg_25; unsigned char reg_26; unsigned char debug; - unsigned char capabilities; + unsigned char capabilities[3]; bool paritycheck; bool jumpy_cursor; + bool reports_pressure; + bool crc_enabled; + bool set_hw_resolution; unsigned char hw_version; unsigned int fw_version; unsigned int single_finger_reports; + unsigned int y_max; + unsigned int width; + struct finger_pos mt[ETP_MAX_FINGERS]; unsigned char parity[256]; + int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param); }; #ifdef CONFIG_MOUSE_PS2_ELANTECH diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index 7b6ce178f1b..8c7d94200bd 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -8,13 +8,12 @@ * published by the Free Software Foundation. */ -#include <linux/init.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/input-polldev.h> +#include <linux/gpio.h> #include <linux/gpio_mouse.h> -#include <asm/gpio.h> /* * Timer function which is run every scan_ms ms when the device is opened. @@ -46,9 +45,9 @@ static void gpio_mouse_scan(struct input_polled_dev *dev) input_sync(input); } -static int __devinit gpio_mouse_probe(struct platform_device *pdev) +static int gpio_mouse_probe(struct platform_device *pdev) { - struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; + struct gpio_mouse_platform_data *pdata = dev_get_platdata(&pdev->dev); struct input_polled_dev *input_poll; struct input_dev *input; int pin, i; @@ -138,7 +137,6 @@ static int __devinit gpio_mouse_probe(struct platform_device *pdev) out_free_polldev: input_free_polled_device(input_poll); - platform_set_drvdata(pdev, NULL); out_free_gpios: while (--i >= 0) { @@ -150,7 +148,7 @@ static int __devinit gpio_mouse_probe(struct platform_device *pdev) return error; } -static int __devexit gpio_mouse_remove(struct platform_device *pdev) +static int gpio_mouse_remove(struct platform_device *pdev) { struct input_polled_dev *input = platform_get_drvdata(pdev); struct gpio_mouse_platform_data *pdata = input->private; @@ -165,33 +163,20 @@ static int __devexit gpio_mouse_remove(struct platform_device *pdev) gpio_free(pin); } - platform_set_drvdata(pdev, NULL); - return 0; } static struct platform_driver gpio_mouse_device_driver = { .probe = gpio_mouse_probe, - .remove = __devexit_p(gpio_mouse_remove), + .remove = gpio_mouse_remove, .driver = { .name = "gpio_mouse", .owner = THIS_MODULE, } }; +module_platform_driver(gpio_mouse_device_driver); -static int __init gpio_mouse_init(void) -{ - return platform_driver_register(&gpio_mouse_device_driver); -} -module_init(gpio_mouse_init); - -static void __exit gpio_mouse_exit(void) -{ - platform_driver_unregister(&gpio_mouse_device_driver); -} -module_exit(gpio_mouse_exit); - -MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); +MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); MODULE_DESCRIPTION("GPIO mouse driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */ diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index 95577c15ae5..62be888e83d 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -32,6 +32,7 @@ #define DEBUG #include <linux/slab.h> #include <linux/input.h> +#include <linux/module.h> #include <linux/serio.h> #include <linux/libps2.h> #include <linux/delay.h> @@ -135,10 +136,10 @@ static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y) /* discard if too big, or half that but > 4 times the prev delta */ if (avx > recalib_delta || (avx > recalib_delta / 2 && ((avx / 4) > priv->xlast))) { - hgpk_err(psmouse, "detected %dpx jump in x\n", x); + psmouse_warn(psmouse, "detected %dpx jump in x\n", x); priv->xbigj = avx; } else if (approx_half(avx, priv->xbigj)) { - hgpk_err(psmouse, "detected secondary %dpx jump in x\n", x); + psmouse_warn(psmouse, "detected secondary %dpx jump in x\n", x); priv->xbigj = avx; priv->xsaw_secondary++; } else { @@ -150,10 +151,10 @@ static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y) if (avy > recalib_delta || (avy > recalib_delta / 2 && ((avy / 4) > priv->ylast))) { - hgpk_err(psmouse, "detected %dpx jump in y\n", y); + psmouse_warn(psmouse, "detected %dpx jump in y\n", y); priv->ybigj = avy; } else if (approx_half(avy, priv->ybigj)) { - hgpk_err(psmouse, "detected secondary %dpx jump in y\n", y); + psmouse_warn(psmouse, "detected secondary %dpx jump in y\n", y); priv->ybigj = avy; priv->ysaw_secondary++; } else { @@ -167,7 +168,7 @@ static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y) priv->ylast = avy; if (do_recal && jumpy_delay) { - hgpk_err(psmouse, "scheduling recalibration\n"); + psmouse_warn(psmouse, "scheduling recalibration\n"); psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(jumpy_delay)); } @@ -259,8 +260,8 @@ static void hgpk_spewing_hack(struct psmouse *psmouse, * movement, it is probably a case of the user moving the * cursor very slowly across the screen. */ if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) { - hgpk_err(psmouse, "packet spew detected (%d,%d)\n", - priv->x_tally, priv->y_tally); + psmouse_warn(psmouse, "packet spew detected (%d,%d)\n", + priv->x_tally, priv->y_tally); priv->spew_flag = RECALIBRATING; psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(spew_delay)); @@ -332,12 +333,9 @@ static bool hgpk_is_byte_valid(struct psmouse *psmouse, unsigned char *packet) } if (!valid) - hgpk_dbg(psmouse, - "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n", - priv->mode, pktcnt, - psmouse->packet[0], psmouse->packet[1], - psmouse->packet[2], psmouse->packet[3], - psmouse->packet[4], psmouse->packet[5]); + psmouse_dbg(psmouse, + "bad data, mode %d (%d) %*ph\n", + priv->mode, pktcnt, 6, psmouse->packet); return valid; } @@ -360,19 +358,20 @@ static void hgpk_process_advanced_packet(struct psmouse *psmouse) input_report_abs(idev, ABS_PRESSURE, z); if (tpdebug) - hgpk_dbg(psmouse, "pd=%d fd=%d z=%d", - pt_down, finger_down, z); + psmouse_dbg(psmouse, "pd=%d fd=%d z=%d", + pt_down, finger_down, z); } else { /* * PenTablet mode does not report pressure, so we don't * report it here */ if (tpdebug) - hgpk_dbg(psmouse, "pd=%d ", down); + psmouse_dbg(psmouse, "pd=%d ", down); } if (tpdebug) - hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y); + psmouse_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", + left, right, x, y); input_report_key(idev, BTN_TOUCH, down); input_report_key(idev, BTN_LEFT, left); @@ -394,7 +393,7 @@ static void hgpk_process_advanced_packet(struct psmouse *psmouse) if (x == priv->abs_x && y == priv->abs_y) { if (++priv->dupe_count > SPEW_WATCH_COUNT) { if (tpdebug) - hgpk_dbg(psmouse, "hard spew detected\n"); + psmouse_dbg(psmouse, "hard spew detected\n"); priv->spew_flag = RECALIBRATING; psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(spew_delay)); @@ -411,7 +410,7 @@ static void hgpk_process_advanced_packet(struct psmouse *psmouse) int y_diff = priv->abs_y - y; if (hgpk_discard_decay_hack(psmouse, x_diff, y_diff)) { if (tpdebug) - hgpk_dbg(psmouse, "discarding\n"); + psmouse_dbg(psmouse, "discarding\n"); goto done; } hgpk_spewing_hack(psmouse, left, right, x_diff, y_diff); @@ -436,20 +435,21 @@ static void hgpk_process_simple_packet(struct psmouse *psmouse) int y = ((packet[0] << 3) & 0x100) - packet[2]; if (packet[0] & 0xc0) - hgpk_dbg(psmouse, - "overflow -- 0x%02x 0x%02x 0x%02x\n", - packet[0], packet[1], packet[2]); + psmouse_dbg(psmouse, + "overflow -- 0x%02x 0x%02x 0x%02x\n", + packet[0], packet[1], packet[2]); if (hgpk_discard_decay_hack(psmouse, x, y)) { if (tpdebug) - hgpk_dbg(psmouse, "discarding\n"); + psmouse_dbg(psmouse, "discarding\n"); return; } hgpk_spewing_hack(psmouse, left, right, x, y); if (tpdebug) - hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y); + psmouse_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", + left, right, x, y); input_report_key(dev, BTN_LEFT, left); input_report_key(dev, BTN_RIGHT, right); @@ -481,9 +481,8 @@ static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse) * ugh, got a packet inside our recalibration * window, schedule another recalibration. */ - hgpk_dbg(psmouse, - "packet inside calibration window, " - "queueing another recalibration\n"); + psmouse_dbg(psmouse, + "packet inside calibration window, queueing another recalibration\n"); psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(post_interrupt_delay)); } @@ -627,7 +626,7 @@ static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate) err = hgpk_select_mode(psmouse); if (err) { - hgpk_err(psmouse, "failed to select mode\n"); + psmouse_err(psmouse, "failed to select mode\n"); return err; } @@ -638,7 +637,6 @@ static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate) static int hgpk_force_recalibrate(struct psmouse *psmouse) { - struct ps2dev *ps2dev = &psmouse->ps2dev; struct hgpk_data *priv = psmouse->private; int err; @@ -647,11 +645,11 @@ static int hgpk_force_recalibrate(struct psmouse *psmouse) return 0; if (!autorecal) { - hgpk_dbg(psmouse, "recalibrations disabled, ignoring\n"); + psmouse_dbg(psmouse, "recalibration disabled, ignoring\n"); return 0; } - hgpk_dbg(psmouse, "recalibrating touchpad..\n"); + psmouse_dbg(psmouse, "recalibrating touchpad..\n"); /* we don't want to race with the irq handler, nor with resyncs */ psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); @@ -667,14 +665,11 @@ static int hgpk_force_recalibrate(struct psmouse *psmouse) * we don't have a good way to deal with it. The 2s window stuff * (below) is our best option for now. */ - - if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) + if (psmouse_activate(psmouse)) return -1; - psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); - if (tpdebug) - hgpk_dbg(psmouse, "touchpad reactivated\n"); + psmouse_dbg(psmouse, "touchpad reactivated\n"); /* * If we get packets right away after recalibrating, it's likely @@ -726,16 +721,15 @@ static int hgpk_toggle_powersave(struct psmouse *psmouse, int enable) err = hgpk_reset_device(psmouse, false); if (err) { - hgpk_err(psmouse, "Failed to reset device!\n"); + psmouse_err(psmouse, "Failed to reset device!\n"); return err; } /* should be all set, enable the touchpad */ - ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); - psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); - hgpk_dbg(psmouse, "Touchpad powered up.\n"); + psmouse_activate(psmouse); + psmouse_dbg(psmouse, "Touchpad powered up.\n"); } else { - hgpk_dbg(psmouse, "Powering off touchpad.\n"); + psmouse_dbg(psmouse, "Powering off touchpad.\n"); if (ps2_command(ps2dev, NULL, 0xec) || ps2_command(ps2dev, NULL, 0xec) || @@ -787,11 +781,14 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data, const char *buf, size_t count) { struct hgpk_data *priv = psmouse->private; - unsigned long value; + unsigned int value; int err; - err = strict_strtoul(buf, 10, &value); - if (err || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (value != priv->powered) { @@ -879,11 +876,14 @@ static ssize_t hgpk_trigger_recal(struct psmouse *psmouse, void *data, const char *buf, size_t count) { struct hgpk_data *priv = psmouse->private; - unsigned long value; + unsigned int value; int err; - err = strict_strtoul(buf, 10, &value); - if (err || value != 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value != 1) return -EINVAL; /* @@ -922,7 +922,7 @@ static void hgpk_recalib_work(struct work_struct *work) struct psmouse *psmouse = priv->psmouse; if (hgpk_force_recalibrate(psmouse)) - hgpk_err(psmouse, "recalibration failed!\n"); + psmouse_err(psmouse, "recalibration failed!\n"); } static int hgpk_register(struct psmouse *psmouse) @@ -946,14 +946,15 @@ static int hgpk_register(struct psmouse *psmouse) err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_powered.dattr); if (err) { - hgpk_err(psmouse, "Failed creating 'powered' sysfs node\n"); + psmouse_err(psmouse, "Failed creating 'powered' sysfs node\n"); return err; } err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_hgpk_mode.dattr); if (err) { - hgpk_err(psmouse, "Failed creating 'hgpk_mode' sysfs node\n"); + psmouse_err(psmouse, + "Failed creating 'hgpk_mode' sysfs node\n"); goto err_remove_powered; } @@ -962,8 +963,8 @@ static int hgpk_register(struct psmouse *psmouse) err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_recalibrate.dattr); if (err) { - hgpk_err(psmouse, - "Failed creating 'recalibrate' sysfs node\n"); + psmouse_err(psmouse, + "Failed creating 'recalibrate' sysfs node\n"); goto err_remove_mode; } } @@ -1026,13 +1027,13 @@ static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse) return -EIO; } - hgpk_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]); + psmouse_dbg(psmouse, "ID: %*ph\n", 3, param); /* HGPK signature: 0x67, 0x00, 0x<model> */ if (param[0] != 0x67 || param[1] != 0x00) return -ENODEV; - hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]); + psmouse_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]); return param[2]; } diff --git a/drivers/input/mouse/hgpk.h b/drivers/input/mouse/hgpk.h index 311c0e87fcb..dd686771cfe 100644 --- a/drivers/input/mouse/hgpk.h +++ b/drivers/input/mouse/hgpk.h @@ -46,17 +46,6 @@ struct hgpk_data { int xsaw_secondary, ysaw_secondary; /* jumpiness detection */ }; -#define hgpk_dbg(psmouse, format, arg...) \ - dev_dbg(&(psmouse)->ps2dev.serio->dev, format, ## arg) -#define hgpk_err(psmouse, format, arg...) \ - dev_err(&(psmouse)->ps2dev.serio->dev, format, ## arg) -#define hgpk_info(psmouse, format, arg...) \ - dev_info(&(psmouse)->ps2dev.serio->dev, format, ## arg) -#define hgpk_warn(psmouse, format, arg...) \ - dev_warn(&(psmouse)->ps2dev.serio->dev, format, ## arg) -#define hgpk_notice(psmouse, format, arg...) \ - dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg) - #ifdef CONFIG_MOUSE_PS2_OLPC void hgpk_module_init(void); int hgpk_detect(struct psmouse *psmouse, bool set_properties); diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index c31ad11df6b..23222dd5a66 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -33,7 +33,7 @@ static const char *desired_serio_phys; static int lifebook_limit_serio3(const struct dmi_system_id *d) { desired_serio_phys = "isa0060/serio3"; - return 0; + return 1; } static bool lifebook_use_6byte_proto; @@ -41,10 +41,10 @@ static bool lifebook_use_6byte_proto; static int lifebook_set_6byte_proto(const struct dmi_system_id *d) { lifebook_use_6byte_proto = true; - return 0; + return 1; } -static const struct dmi_system_id __initconst lifebook_dmi_table[] = { +static const struct dmi_system_id lifebook_dmi_table[] __initconst = { { /* FLORA-ie 55mi */ .matches = { @@ -169,8 +169,8 @@ static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse) if (relative_packet) { if (!dev2) - printk(KERN_WARNING "lifebook.c: got relative packet " - "but no relative device set up\n"); + psmouse_warn(psmouse, + "got relative packet but no relative device set up\n"); } else { if (lifebook_use_6byte_proto) { input_report_abs(dev1, ABS_X, @@ -212,7 +212,7 @@ static int lifebook_absolute_mode(struct psmouse *psmouse) /* * Enable absolute output -- ps2_command fails always but if - * you leave this call out the touchsreen will never send + * you leave this call out the touchscreen will never send * absolute coordinates */ param = lifebook_use_6byte_proto ? 0x08 : 0x07; diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index c9983aee908..136e222e2a1 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -82,11 +82,11 @@ static psmouse_ret_t ps2pp_process_byte(struct psmouse *psmouse) packet[0] = packet[2] | 0x08; break; -#ifdef DEBUG default: - printk(KERN_WARNING "psmouse.c: Received PS2++ packet #%x, but don't know how to handle.\n", - (packet[1] >> 4) | (packet[0] & 0x30)); -#endif + psmouse_dbg(psmouse, + "Received PS2++ packet #%x, but don't know how to handle.\n", + (packet[1] >> 4) | (packet[0] & 0x30)); + break; } } else { /* Standard PS/2 motion data */ @@ -155,9 +155,14 @@ static ssize_t ps2pp_attr_show_smartscroll(struct psmouse *psmouse, static ssize_t ps2pp_attr_set_smartscroll(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long value; + unsigned int value; + int err; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; - if (strict_strtoul(buf, 10, &value) || value > 1) + if (value > 1) return -EINVAL; ps2pp_set_smartscroll(psmouse, value); @@ -215,7 +220,7 @@ static const struct ps2pp_info *get_model_info(unsigned char model) { 61, PS2PP_KIND_MX, /* MX700 */ PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN | PS2PP_EXTRA_BTN | PS2PP_NAV_BTN }, - { 66, PS2PP_KIND_MX, /* MX3100 reciver */ + { 66, PS2PP_KIND_MX, /* MX3100 receiver */ PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN | PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL }, { 72, PS2PP_KIND_TRACKMAN, 0 }, /* T-CH11: TrackMan Marble */ @@ -382,7 +387,7 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties) } } else { - printk(KERN_WARNING "logips2pp: Detected unknown logitech mouse model %d\n", model); + psmouse_warn(psmouse, "Detected unknown Logitech mouse model %d\n", model); } if (set_properties) { @@ -400,9 +405,9 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties) error = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_smartscroll.dattr); if (error) { - printk(KERN_ERR - "logips2pp.c: failed to create smartscroll " - "sysfs attribute, error: %d\n", error); + psmouse_err(psmouse, + "failed to create smartscroll sysfs attribute, error: %d\n", + error); return -1; } } diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c index 5f278176eb9..0a60717b91c 100644 --- a/drivers/input/mouse/maplemouse.c +++ b/drivers/input/mouse/maplemouse.c @@ -64,7 +64,7 @@ static void dc_mouse_close(struct input_dev *dev) } /* allow the mouse to be used */ -static int __devinit probe_maple_mouse(struct device *dev) +static int probe_maple_mouse(struct device *dev) { struct maple_device *mdev = to_maple_dev(dev); struct maple_driver *mdrv = to_maple_driver(dev->driver); @@ -114,7 +114,7 @@ fail: return error; } -static int __devexit remove_maple_mouse(struct device *dev) +static int remove_maple_mouse(struct device *dev) { struct maple_device *mdev = to_maple_dev(dev); struct dc_mouse *mse = maple_get_drvdata(mdev); @@ -132,7 +132,7 @@ static struct maple_driver dc_mouse_driver = { .drv = { .name = "Dreamcast_mouse", .probe = probe_maple_mouse, - .remove = __devexit_p(remove_maple_mouse), + .remove = remove_maple_mouse, }, }; diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c new file mode 100644 index 00000000000..1ccc88af1f0 --- /dev/null +++ b/drivers/input/mouse/navpoint.c @@ -0,0 +1,368 @@ +/* + * Synaptics NavPoint (PXA27x SSP/SPI) driver. + * + * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/input/navpoint.h> +#include <linux/interrupt.h> +#include <linux/mutex.h> +#include <linux/pxa2xx_ssp.h> +#include <linux/slab.h> + +/* + * Synaptics Modular Embedded Protocol: Module Packet Format. + * Module header byte 2:0 = Length (# bytes that follow) + * Module header byte 4:3 = Control + * Module header byte 7:5 = Module Address + */ +#define HEADER_LENGTH(byte) ((byte) & 0x07) +#define HEADER_CONTROL(byte) (((byte) >> 3) & 0x03) +#define HEADER_ADDRESS(byte) ((byte) >> 5) + +struct navpoint { + struct ssp_device *ssp; + struct input_dev *input; + struct device *dev; + int gpio; + int index; + u8 data[1 + HEADER_LENGTH(0xff)]; +}; + +/* + * Initialization values for SSCR0_x, SSCR1_x, SSSR_x. + */ +static const u32 sscr0 = 0 + | SSCR0_TUM /* TIM = 1; No TUR interrupts */ + | SSCR0_RIM /* RIM = 1; No ROR interrupts */ + | SSCR0_SSE /* SSE = 1; SSP enabled */ + | SSCR0_Motorola /* FRF = 0; Motorola SPI */ + | SSCR0_DataSize(16) /* DSS = 15; Data size = 16-bit */ + ; +static const u32 sscr1 = 0 + | SSCR1_SCFR /* SCFR = 1; SSPSCLK only during transfers */ + | SSCR1_SCLKDIR /* SCLKDIR = 1; Slave mode */ + | SSCR1_SFRMDIR /* SFRMDIR = 1; Slave mode */ + | SSCR1_RWOT /* RWOT = 1; Receive without transmit mode */ + | SSCR1_RxTresh(1) /* RFT = 0; Receive FIFO threshold = 1 */ + | SSCR1_SPH /* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */ + | SSCR1_RIE /* RIE = 1; Receive FIFO interrupt enabled */ + ; +static const u32 sssr = 0 + | SSSR_BCE /* BCE = 1; Clear BCE */ + | SSSR_TUR /* TUR = 1; Clear TUR */ + | SSSR_EOC /* EOC = 1; Clear EOC */ + | SSSR_TINT /* TINT = 1; Clear TINT */ + | SSSR_PINT /* PINT = 1; Clear PINT */ + | SSSR_ROR /* ROR = 1; Clear ROR */ + ; + +/* + * MEP Query $22: Touchpad Coordinate Range Query is not supported by + * the NavPoint module, so sampled values provide the default limits. + */ +#define NAVPOINT_X_MIN 1278 +#define NAVPOINT_X_MAX 5340 +#define NAVPOINT_Y_MIN 1572 +#define NAVPOINT_Y_MAX 4396 +#define NAVPOINT_PRESSURE_MIN 0 +#define NAVPOINT_PRESSURE_MAX 255 + +static void navpoint_packet(struct navpoint *navpoint) +{ + int finger; + int gesture; + int x, y, z; + + switch (navpoint->data[0]) { + case 0xff: /* Garbage (packet?) between reset and Hello packet */ + case 0x00: /* Module 0, NULL packet */ + break; + + case 0x0e: /* Module 0, Absolute packet */ + finger = (navpoint->data[1] & 0x01); + gesture = (navpoint->data[1] & 0x02); + x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3]; + y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5]; + z = navpoint->data[6]; + input_report_key(navpoint->input, BTN_TOUCH, finger); + input_report_abs(navpoint->input, ABS_X, x); + input_report_abs(navpoint->input, ABS_Y, y); + input_report_abs(navpoint->input, ABS_PRESSURE, z); + input_report_key(navpoint->input, BTN_TOOL_FINGER, finger); + input_report_key(navpoint->input, BTN_LEFT, gesture); + input_sync(navpoint->input); + break; + + case 0x19: /* Module 0, Hello packet */ + if ((navpoint->data[1] & 0xf0) == 0x10) + break; + /* FALLTHROUGH */ + default: + dev_warn(navpoint->dev, + "spurious packet: data=0x%02x,0x%02x,...\n", + navpoint->data[0], navpoint->data[1]); + break; + } +} + +static irqreturn_t navpoint_irq(int irq, void *dev_id) +{ + struct navpoint *navpoint = dev_id; + struct ssp_device *ssp = navpoint->ssp; + irqreturn_t ret = IRQ_NONE; + u32 status; + + status = pxa_ssp_read_reg(ssp, SSSR); + if (status & sssr) { + dev_warn(navpoint->dev, + "unexpected interrupt: status=0x%08x\n", status); + pxa_ssp_write_reg(ssp, SSSR, (status & sssr)); + ret = IRQ_HANDLED; + } + + while (status & SSSR_RNE) { + u32 data; + + data = pxa_ssp_read_reg(ssp, SSDR); + navpoint->data[navpoint->index + 0] = (data >> 8); + navpoint->data[navpoint->index + 1] = data; + navpoint->index += 2; + if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) { + navpoint_packet(navpoint); + navpoint->index = 0; + } + status = pxa_ssp_read_reg(ssp, SSSR); + ret = IRQ_HANDLED; + } + + return ret; +} + +static void navpoint_up(struct navpoint *navpoint) +{ + struct ssp_device *ssp = navpoint->ssp; + int timeout; + + clk_prepare_enable(ssp->clk); + + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + pxa_ssp_write_reg(ssp, SSSR, sssr); + pxa_ssp_write_reg(ssp, SSTO, 0); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* SSCR0_SSE written last */ + + /* Wait until SSP port is ready for slave clock operations */ + for (timeout = 100; timeout != 0; --timeout) { + if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS)) + break; + msleep(1); + } + + if (timeout == 0) + dev_err(navpoint->dev, + "timeout waiting for SSSR[CSS] to clear\n"); + + if (gpio_is_valid(navpoint->gpio)) + gpio_set_value(navpoint->gpio, 1); +} + +static void navpoint_down(struct navpoint *navpoint) +{ + struct ssp_device *ssp = navpoint->ssp; + + if (gpio_is_valid(navpoint->gpio)) + gpio_set_value(navpoint->gpio, 0); + + pxa_ssp_write_reg(ssp, SSCR0, 0); + + clk_disable_unprepare(ssp->clk); +} + +static int navpoint_open(struct input_dev *input) +{ + struct navpoint *navpoint = input_get_drvdata(input); + + navpoint_up(navpoint); + + return 0; +} + +static void navpoint_close(struct input_dev *input) +{ + struct navpoint *navpoint = input_get_drvdata(input); + + navpoint_down(navpoint); +} + +static int navpoint_probe(struct platform_device *pdev) +{ + const struct navpoint_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct ssp_device *ssp; + struct input_dev *input; + struct navpoint *navpoint; + int error; + + if (!pdata) { + dev_err(&pdev->dev, "no platform data\n"); + return -EINVAL; + } + + if (gpio_is_valid(pdata->gpio)) { + error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW, + "SYNAPTICS_ON"); + if (error) + return error; + } + + ssp = pxa_ssp_request(pdata->port, pdev->name); + if (!ssp) { + error = -ENODEV; + goto err_free_gpio; + } + + /* HaRET does not disable devices before jumping into Linux */ + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { + pxa_ssp_write_reg(ssp, SSCR0, 0); + dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port); + } + + navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL); + input = input_allocate_device(); + if (!navpoint || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + navpoint->ssp = ssp; + navpoint->input = input; + navpoint->dev = &pdev->dev; + navpoint->gpio = pdata->gpio; + + input->name = pdev->name; + input->dev.parent = &pdev->dev; + + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_LEFT, input->keybit); + __set_bit(BTN_TOUCH, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); + + input_set_abs_params(input, ABS_X, + NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0); + input_set_abs_params(input, ABS_Y, + NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, + NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX, + 0, 0); + + input->open = navpoint_open; + input->close = navpoint_close; + + input_set_drvdata(input, navpoint); + + error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint); + if (error) + goto err_free_mem; + + error = input_register_device(input); + if (error) + goto err_free_irq; + + platform_set_drvdata(pdev, navpoint); + dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq); + + return 0; + +err_free_irq: + free_irq(ssp->irq, navpoint); +err_free_mem: + input_free_device(input); + kfree(navpoint); + pxa_ssp_free(ssp); +err_free_gpio: + if (gpio_is_valid(pdata->gpio)) + gpio_free(pdata->gpio); + + return error; +} + +static int navpoint_remove(struct platform_device *pdev) +{ + const struct navpoint_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct navpoint *navpoint = platform_get_drvdata(pdev); + struct ssp_device *ssp = navpoint->ssp; + + free_irq(ssp->irq, navpoint); + + input_unregister_device(navpoint->input); + kfree(navpoint); + + pxa_ssp_free(ssp); + + if (gpio_is_valid(pdata->gpio)) + gpio_free(pdata->gpio); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int navpoint_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct navpoint *navpoint = platform_get_drvdata(pdev); + struct input_dev *input = navpoint->input; + + mutex_lock(&input->mutex); + if (input->users) + navpoint_down(navpoint); + mutex_unlock(&input->mutex); + + return 0; +} + +static int navpoint_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct navpoint *navpoint = platform_get_drvdata(pdev); + struct input_dev *input = navpoint->input; + + mutex_lock(&input->mutex); + if (input->users) + navpoint_up(navpoint); + mutex_unlock(&input->mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume); + +static struct platform_driver navpoint_driver = { + .probe = navpoint_probe, + .remove = navpoint_remove, + .driver = { + .name = "navpoint", + .owner = THIS_MODULE, + .pm = &navpoint_pm_ops, + }, +}; + +module_platform_driver(navpoint_driver); + +MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>"); +MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:navpoint"); diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 3f74baee102..cff065f6261 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -11,6 +11,9 @@ * the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#define psmouse_fmt(fmt) fmt + #include <linux/delay.h> #include <linux/module.h> #include <linux/slab.h> @@ -31,6 +34,7 @@ #include "touchkit_ps2.h" #include "elantech.h" #include "sentelic.h" +#include "cypress_ps2.h" #define DRIVER_DESC "PS/2 mouse driver" @@ -57,7 +61,7 @@ static unsigned int psmouse_rate = 100; module_param_named(rate, psmouse_rate, uint, 0644); MODULE_PARM_DESC(rate, "Report rate, in reports per second."); -static unsigned int psmouse_smartscroll = 1; +static bool psmouse_smartscroll = 1; module_param_named(smartscroll, psmouse_smartscroll, bool, 0644); MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); @@ -124,7 +128,7 @@ struct psmouse_protocol { * relevant events to the input module once full packet has arrived. */ -static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) +psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; unsigned char *packet = psmouse->packet; @@ -251,11 +255,14 @@ static int psmouse_handle_byte(struct psmouse *psmouse) switch (rc) { case PSMOUSE_BAD_DATA: if (psmouse->state == PSMOUSE_ACTIVATED) { - printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n", - psmouse->name, psmouse->phys, psmouse->pktcnt); + psmouse_warn(psmouse, + "%s at %s lost sync at byte %d\n", + psmouse->name, psmouse->phys, + psmouse->pktcnt); if (++psmouse->out_of_sync_cnt == psmouse->resetafter) { __psmouse_set_state(psmouse, PSMOUSE_IGNORE); - printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n"); + psmouse_notice(psmouse, + "issuing reconnect request\n"); serio_reconnect(psmouse->ps2dev.serio); return -1; } @@ -267,8 +274,9 @@ static int psmouse_handle_byte(struct psmouse *psmouse) psmouse->pktcnt = 0; if (psmouse->out_of_sync_cnt) { psmouse->out_of_sync_cnt = 0; - printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n", - psmouse->name, psmouse->phys); + psmouse_notice(psmouse, + "%s at %s - driver resynced.\n", + psmouse->name, psmouse->phys); } break; @@ -295,9 +303,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, ((flags & SERIO_PARITY) && !psmouse->ignore_parity))) { if (psmouse->state == PSMOUSE_ACTIVATED) - printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n", - flags & SERIO_TIMEOUT ? " timeout" : "", - flags & SERIO_PARITY ? " bad parity" : ""); + psmouse_warn(psmouse, + "bad data from KBC -%s%s\n", + flags & SERIO_TIMEOUT ? " timeout" : "", + flags & SERIO_PARITY ? " bad parity" : ""); ps2_cmd_aborted(&psmouse->ps2dev); goto out; } @@ -315,8 +324,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, if (psmouse->state == PSMOUSE_ACTIVATED && psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) { - printk(KERN_INFO "psmouse.c: %s at %s lost synchronization, throwing %d bytes away.\n", - psmouse->name, psmouse->phys, psmouse->pktcnt); + psmouse_info(psmouse, "%s at %s lost synchronization, throwing %d bytes away.\n", + psmouse->name, psmouse->phys, psmouse->pktcnt); psmouse->badbyte = psmouse->packet[0]; __psmouse_set_state(psmouse, PSMOUSE_RESYNCING); psmouse_queue_work(psmouse, &psmouse->resync_work, 0); @@ -410,6 +419,49 @@ int psmouse_reset(struct psmouse *psmouse) return 0; } +/* + * Here we set the mouse resolution. + */ + +void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution) +{ + static const unsigned char params[] = { 0, 1, 2, 2, 3 }; + unsigned char p; + + if (resolution == 0 || resolution > 200) + resolution = 200; + + p = params[resolution / 50]; + ps2_command(&psmouse->ps2dev, &p, PSMOUSE_CMD_SETRES); + psmouse->resolution = 25 << p; +} + +/* + * Here we set the mouse report rate. + */ + +static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) +{ + static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 }; + unsigned char r; + int i = 0; + + while (rates[i] > rate) i++; + r = rates[i]; + ps2_command(&psmouse->ps2dev, &r, PSMOUSE_CMD_SETRATE); + psmouse->rate = r; +} + +/* + * psmouse_poll() - default poll handler. Everyone except for ALPS uses it. + */ + +static int psmouse_poll(struct psmouse *psmouse) +{ + return ps2_command(&psmouse->ps2dev, psmouse->packet, + PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)); +} + /* * Genius NetMouse magic init. @@ -595,6 +647,56 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties) } /* + * Apply default settings to the psmouse structure. Most of them will + * be overridden by individual protocol initialization routines. + */ + +static void psmouse_apply_defaults(struct psmouse *psmouse) +{ + struct input_dev *input_dev = psmouse->dev; + + memset(input_dev->evbit, 0, sizeof(input_dev->evbit)); + memset(input_dev->keybit, 0, sizeof(input_dev->keybit)); + memset(input_dev->relbit, 0, sizeof(input_dev->relbit)); + memset(input_dev->absbit, 0, sizeof(input_dev->absbit)); + memset(input_dev->mscbit, 0, sizeof(input_dev->mscbit)); + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(EV_REL, input_dev->evbit); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + + __set_bit(REL_X, input_dev->relbit); + __set_bit(REL_Y, input_dev->relbit); + + psmouse->set_rate = psmouse_set_rate; + psmouse->set_resolution = psmouse_set_resolution; + psmouse->poll = psmouse_poll; + psmouse->protocol_handler = psmouse_process_byte; + psmouse->pktsize = 3; + psmouse->reconnect = NULL; + psmouse->disconnect = NULL; + psmouse->cleanup = NULL; + psmouse->pt_activate = NULL; + psmouse->pt_deactivate = NULL; +} + +/* + * Apply default settings to the psmouse structure and call specified + * protocol detection or initialization routine. + */ +static int psmouse_do_detect(int (*detect)(struct psmouse *psmouse, + bool set_properties), + struct psmouse *psmouse, bool set_properties) +{ + if (set_properties) + psmouse_apply_defaults(psmouse); + + return detect(psmouse, set_properties); +} + +/* * psmouse_extensions() probes for any extensions to the basic PS/2 protocol * the mouse may have. */ @@ -608,7 +710,7 @@ static int psmouse_extensions(struct psmouse *psmouse, * We always check for lifebook because it does not disturb mouse * (it only checks DMI information). */ - if (lifebook_detect(psmouse, set_properties) == 0) { + if (psmouse_do_detect(lifebook_detect, psmouse, set_properties) == 0) { if (max_proto > PSMOUSE_IMEX) { if (!set_properties || lifebook_init(psmouse) == 0) return PSMOUSE_LIFEBOOK; @@ -620,15 +722,18 @@ static int psmouse_extensions(struct psmouse *psmouse, * upsets the thinkingmouse). */ - if (max_proto > PSMOUSE_IMEX && thinking_detect(psmouse, set_properties) == 0) + if (max_proto > PSMOUSE_IMEX && + psmouse_do_detect(thinking_detect, psmouse, set_properties) == 0) { return PSMOUSE_THINKPS; + } /* * Try Synaptics TouchPad. Note that probing is done even if Synaptics protocol * support is disabled in config - we need to know if it is synaptics so we * can reset it properly after probing for intellimouse. */ - if (max_proto > PSMOUSE_PS2 && synaptics_detect(psmouse, set_properties) == 0) { + if (max_proto > PSMOUSE_PS2 && + psmouse_do_detect(synaptics_detect, psmouse, set_properties) == 0) { synaptics_hardware = true; if (max_proto > PSMOUSE_IMEX) { @@ -655,11 +760,34 @@ static int psmouse_extensions(struct psmouse *psmouse, } /* + * Try Cypress Trackpad. + * Must try it before Finger Sensing Pad because Finger Sensing Pad probe + * upsets some modules of Cypress Trackpads. + */ + if (max_proto > PSMOUSE_IMEX && + cypress_detect(psmouse, set_properties) == 0) { + if (cypress_supported()) { + if (cypress_init(psmouse) == 0) + return PSMOUSE_CYPRESS; + + /* + * Finger Sensing Pad probe upsets some modules of + * Cypress Trackpad, must avoid Finger Sensing Pad + * probe if Cypress Trackpad device detected. + */ + return PSMOUSE_PS2; + } + + max_proto = PSMOUSE_IMEX; + } + +/* * Try ALPS TouchPad */ if (max_proto > PSMOUSE_IMEX) { ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); - if (alps_detect(psmouse, set_properties) == 0) { + if (psmouse_do_detect(alps_detect, + psmouse, set_properties) == 0) { if (!set_properties || alps_init(psmouse) == 0) return PSMOUSE_ALPS; /* @@ -673,7 +801,7 @@ static int psmouse_extensions(struct psmouse *psmouse, * Try OLPC HGPK touchpad. */ if (max_proto > PSMOUSE_IMEX && - hgpk_detect(psmouse, set_properties) == 0) { + psmouse_do_detect(hgpk_detect, psmouse, set_properties) == 0) { if (!set_properties || hgpk_init(psmouse) == 0) return PSMOUSE_HGPK; /* @@ -686,7 +814,7 @@ static int psmouse_extensions(struct psmouse *psmouse, * Try Elantech touchpad. */ if (max_proto > PSMOUSE_IMEX && - elantech_detect(psmouse, set_properties) == 0) { + psmouse_do_detect(elantech_detect, psmouse, set_properties) == 0) { if (!set_properties || elantech_init(psmouse) == 0) return PSMOUSE_ELANTECH; /* @@ -695,18 +823,21 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } - if (max_proto > PSMOUSE_IMEX) { - if (genius_detect(psmouse, set_properties) == 0) + if (psmouse_do_detect(genius_detect, + psmouse, set_properties) == 0) return PSMOUSE_GENPS; - if (ps2pp_init(psmouse, set_properties) == 0) + if (psmouse_do_detect(ps2pp_init, + psmouse, set_properties) == 0) return PSMOUSE_PS2PP; - if (trackpoint_detect(psmouse, set_properties) == 0) + if (psmouse_do_detect(trackpoint_detect, + psmouse, set_properties) == 0) return PSMOUSE_TRACKPOINT; - if (touchkit_ps2_detect(psmouse, set_properties) == 0) + if (psmouse_do_detect(touchkit_ps2_detect, + psmouse, set_properties) == 0) return PSMOUSE_TOUCHKIT_PS2; } @@ -715,7 +846,8 @@ static int psmouse_extensions(struct psmouse *psmouse, * Trackpoint devices (causing TP_READ_ID command to time out). */ if (max_proto > PSMOUSE_IMEX) { - if (fsp_detect(psmouse, set_properties) == 0) { + if (psmouse_do_detect(fsp_detect, + psmouse, set_properties) == 0) { if (!set_properties || fsp_init(psmouse) == 0) return PSMOUSE_FSP; /* @@ -733,17 +865,23 @@ static int psmouse_extensions(struct psmouse *psmouse, ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); psmouse_reset(psmouse); - if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse, set_properties) == 0) + if (max_proto >= PSMOUSE_IMEX && + psmouse_do_detect(im_explorer_detect, + psmouse, set_properties) == 0) { return PSMOUSE_IMEX; + } - if (max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse, set_properties) == 0) + if (max_proto >= PSMOUSE_IMPS && + psmouse_do_detect(intellimouse_detect, + psmouse, set_properties) == 0) { return PSMOUSE_IMPS; + } /* * Okay, all failed, we have a standard mouse here. The number of the buttons * is still a question, though. We assume 3. */ - ps2bare_detect(psmouse, set_properties); + psmouse_do_detect(ps2bare_detect, psmouse, set_properties); if (synaptics_hardware) { /* @@ -781,6 +919,15 @@ static const struct psmouse_protocol psmouse_protocols[] = { .alias = "thinkps", .detect = thinking_detect, }, +#ifdef CONFIG_MOUSE_PS2_CYPRESS + { + .type = PSMOUSE_CYPRESS, + .name = "CyPS/2", + .alias = "cypress", + .detect = cypress_detect, + .init = cypress_init, + }, +#endif { .type = PSMOUSE_GENPS, .name = "GenPS/2", @@ -811,6 +958,13 @@ static const struct psmouse_protocol psmouse_protocols[] = { .detect = synaptics_detect, .init = synaptics_init, }, + { + .type = PSMOUSE_SYNAPTICS_RELATIVE, + .name = "SynRelPS/2", + .alias = "synaptics-relative", + .detect = synaptics_detect, + .init = synaptics_init_relative, + }, #endif #ifdef CONFIG_MOUSE_PS2_ALPS { @@ -943,45 +1097,13 @@ static int psmouse_probe(struct psmouse *psmouse) */ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS)) - printk(KERN_WARNING "psmouse.c: Failed to reset mouse on %s\n", ps2dev->serio->phys); + psmouse_warn(psmouse, "Failed to reset mouse on %s\n", + ps2dev->serio->phys); return 0; } /* - * Here we set the mouse resolution. - */ - -void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution) -{ - static const unsigned char params[] = { 0, 1, 2, 2, 3 }; - unsigned char p; - - if (resolution == 0 || resolution > 200) - resolution = 200; - - p = params[resolution / 50]; - ps2_command(&psmouse->ps2dev, &p, PSMOUSE_CMD_SETRES); - psmouse->resolution = 25 << p; -} - -/* - * Here we set the mouse report rate. - */ - -static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) -{ - static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 }; - unsigned char r; - int i = 0; - - while (rates[i] > rate) i++; - r = rates[i]; - ps2_command(&psmouse->ps2dev, &r, PSMOUSE_CMD_SETRATE); - psmouse->rate = r; -} - -/* * psmouse_initialize() initializes the mouse to a sane state. */ @@ -1002,38 +1124,33 @@ static void psmouse_initialize(struct psmouse *psmouse) * psmouse_activate() enables the mouse so that we get motion reports from it. */ -static void psmouse_activate(struct psmouse *psmouse) +int psmouse_activate(struct psmouse *psmouse) { - if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) - printk(KERN_WARNING "psmouse.c: Failed to enable mouse on %s\n", - psmouse->ps2dev.serio->phys); + if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { + psmouse_warn(psmouse, "Failed to enable mouse on %s\n", + psmouse->ps2dev.serio->phys); + return -1; + } psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); + return 0; } - /* * psmouse_deactivate() puts the mouse into poll mode so that we don't get motion * reports from it unless we explicitly request it. */ -static void psmouse_deactivate(struct psmouse *psmouse) +int psmouse_deactivate(struct psmouse *psmouse) { - if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) - printk(KERN_WARNING "psmouse.c: Failed to deactivate mouse on %s\n", - psmouse->ps2dev.serio->phys); + if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) { + psmouse_warn(psmouse, "Failed to deactivate mouse on %s\n", + psmouse->ps2dev.serio->phys); + return -1; + } psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); -} - -/* - * psmouse_poll() - default poll hanlder. Everyone except for ALPS uses it. - */ - -static int psmouse_poll(struct psmouse *psmouse) -{ - return ps2_command(&psmouse->ps2dev, psmouse->packet, - PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)); + return 0; } @@ -1115,14 +1232,15 @@ static void psmouse_resync(struct work_struct *work) } if (!enabled) { - printk(KERN_WARNING "psmouse.c: failed to re-enable mouse on %s\n", - psmouse->ps2dev.serio->phys); + psmouse_warn(psmouse, "failed to re-enable mouse on %s\n", + psmouse->ps2dev.serio->phys); failed = true; } if (failed) { psmouse_set_state(psmouse, PSMOUSE_IGNORE); - printk(KERN_INFO "psmouse.c: resync failed, issuing reconnect request\n"); + psmouse_info(psmouse, + "resync failed, issuing reconnect request\n"); serio_reconnect(serio); } else psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); @@ -1155,8 +1273,8 @@ static void psmouse_cleanup(struct serio *serio) * Disable stream mode so cleanup routine can proceed undisturbed. */ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) - printk(KERN_WARNING "psmouse.c: Failed to disable mouse on %s\n", - psmouse->ps2dev.serio->phys); + psmouse_warn(psmouse, "Failed to disable mouse on %s\n", + psmouse->ps2dev.serio->phys); if (psmouse->cleanup) psmouse->cleanup(psmouse); @@ -1235,18 +1353,9 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, input_dev->dev.parent = &psmouse->ps2dev.serio->dev; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); - input_dev->keybit[BIT_WORD(BTN_MOUSE)] = - BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); - input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); - - psmouse->set_rate = psmouse_set_rate; - psmouse->set_resolution = psmouse_set_resolution; - psmouse->poll = psmouse_poll; - psmouse->protocol_handler = psmouse_process_byte; - psmouse->pktsize = 3; - if (proto && (proto->detect || proto->init)) { + psmouse_apply_defaults(psmouse); + if (proto->detect && proto->detect(psmouse, true) < 0) return -1; @@ -1400,7 +1509,8 @@ static int psmouse_reconnect(struct serio *serio) int rc = -1; if (!drv || !psmouse) { - printk(KERN_DEBUG "psmouse: reconnect request, but serio is disconnected, ignoring...\n"); + psmouse_dbg(psmouse, + "reconnect request, but serio is disconnected, ignoring...\n"); return -1; } @@ -1427,8 +1537,9 @@ static int psmouse_reconnect(struct serio *serio) goto out; } - /* ok, the device type (and capabilities) match the old one, - * we can continue using it, complete intialization + /* + * OK, the device type (and capabilities) match the old one, + * we can continue using it, complete initialization */ psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); @@ -1546,13 +1657,12 @@ static ssize_t psmouse_show_int_attr(struct psmouse *psmouse, void *offset, char static ssize_t psmouse_set_int_attr(struct psmouse *psmouse, void *offset, const char *buf, size_t count) { unsigned int *field = (unsigned int *)((char *)psmouse + (size_t)offset); - unsigned long value; - - if (strict_strtoul(buf, 10, &value)) - return -EINVAL; + unsigned int value; + int err; - if ((unsigned int)value != value) - return -EINVAL; + err = kstrtouint(buf, 10, &value); + if (err) + return err; *field = value; @@ -1586,9 +1696,8 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co while (!list_empty(&serio->children)) { if (++retry > 3) { - printk(KERN_WARNING - "psmouse: failed to destroy children ports, " - "protocol change aborted.\n"); + psmouse_warn(psmouse, + "failed to destroy children ports, protocol change aborted.\n"); input_free_device(new_dev); return -EIO; } @@ -1660,10 +1769,12 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co static ssize_t psmouse_attr_set_rate(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long value; + unsigned int value; + int err; - if (strict_strtoul(buf, 10, &value)) - return -EINVAL; + err = kstrtouint(buf, 10, &value); + if (err) + return err; psmouse->set_rate(psmouse, value); return count; @@ -1671,10 +1782,12 @@ static ssize_t psmouse_attr_set_rate(struct psmouse *psmouse, void *data, const static ssize_t psmouse_attr_set_resolution(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long value; + unsigned int value; + int err; - if (strict_strtoul(buf, 10, &value)) - return -EINVAL; + err = kstrtouint(buf, 10, &value); + if (err) + return err; psmouse->set_resolution(psmouse, value); return count; @@ -1715,7 +1828,7 @@ static int __init psmouse_init(void) kpsmoused_wq = create_singlethread_workqueue("kpsmoused"); if (!kpsmoused_wq) { - printk(KERN_ERR "psmouse: failed to create kpsmoused workqueue\n"); + pr_err("failed to create kpsmoused workqueue\n"); return -ENOMEM; } diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 593e910bfc7..2f0b39d59a9 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -8,6 +8,7 @@ #define PSMOUSE_CMD_SETSTREAM 0x00ea #define PSMOUSE_CMD_SETPOLL 0x00f0 #define PSMOUSE_CMD_POLL 0x00eb /* caller sets number of bytes to receive */ +#define PSMOUSE_CMD_RESET_WRAP 0x00ec #define PSMOUSE_CMD_GETID 0x02f2 #define PSMOUSE_CMD_SETRATE 0x10f3 #define PSMOUSE_CMD_ENABLE 0x00f4 @@ -93,6 +94,8 @@ enum psmouse_type { PSMOUSE_HGPK, PSMOUSE_ELANTECH, PSMOUSE_FSP, + PSMOUSE_SYNAPTICS_RELATIVE, + PSMOUSE_CYPRESS, PSMOUSE_AUTO /* This one should always be last */ }; @@ -102,6 +105,9 @@ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command); int psmouse_reset(struct psmouse *psmouse); void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state); void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution); +psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse); +int psmouse_activate(struct psmouse *psmouse); +int psmouse_deactivate(struct psmouse *psmouse); struct psmouse_attribute { struct device_attribute dattr; @@ -150,4 +156,29 @@ static struct psmouse_attribute psmouse_attr_##_name = { \ static ssize_t _set(struct psmouse *, void *, const char *, size_t); \ __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, NULL, _set, true) +#ifndef psmouse_fmt +#define psmouse_fmt(fmt) KBUILD_BASENAME ": " fmt +#endif + +#define psmouse_dbg(psmouse, format, ...) \ + dev_dbg(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_info(psmouse, format, ...) \ + dev_info(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_warn(psmouse, format, ...) \ + dev_warn(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_err(psmouse, format, ...) \ + dev_err(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_notice(psmouse, format, ...) \ + dev_notice(&(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) +#define psmouse_printk(level, psmouse, format, ...) \ + dev_printk(level, \ + &(psmouse)->ps2dev.serio->dev, \ + psmouse_fmt(format), ##__VA_ARGS__) + + #endif /* _PSMOUSE_H */ diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c index 943cfec1566..9b4d9a59e22 100644 --- a/drivers/input/mouse/pxa930_trkball.c +++ b/drivers/input/mouse/pxa930_trkball.c @@ -10,9 +10,7 @@ * published by the Free Software Foundation. */ -#include <linux/init.h> #include <linux/input.h> -#include <linux/version.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -21,7 +19,7 @@ #include <linux/slab.h> #include <mach/hardware.h> -#include <mach/pxa930_trkball.h> +#include <linux/platform_data/mouse-pxa930_trkball.h> /* Trackball Controller Register Definitions */ #define TBCR (0x000C) @@ -144,7 +142,7 @@ static void pxa930_trkball_close(struct input_dev *dev) pxa930_trkball_disable(trkball); } -static int __devinit pxa930_trkball_probe(struct platform_device *pdev) +static int pxa930_trkball_probe(struct platform_device *pdev) { struct pxa930_trkball *trkball; struct input_dev *input; @@ -167,7 +165,7 @@ static int __devinit pxa930_trkball_probe(struct platform_device *pdev) if (!trkball) return -ENOMEM; - trkball->pdata = pdev->dev.platform_data; + trkball->pdata = dev_get_platdata(&pdev->dev); if (!trkball->pdata) { dev_err(&pdev->dev, "no platform data defined\n"); error = -EINVAL; @@ -184,7 +182,7 @@ static int __devinit pxa930_trkball_probe(struct platform_device *pdev) /* held the module in reset, will be enabled in open() */ pxa930_trkball_disable(trkball); - error = request_irq(irq, pxa930_trkball_interrupt, IRQF_DISABLED, + error = request_irq(irq, pxa930_trkball_interrupt, 0, pdev->name, trkball); if (error) { dev_err(&pdev->dev, "failed to request irq: %d\n", error); @@ -231,7 +229,7 @@ failed: return error; } -static int __devexit pxa930_trkball_remove(struct platform_device *pdev) +static int pxa930_trkball_remove(struct platform_device *pdev) { struct pxa930_trkball *trkball = platform_get_drvdata(pdev); int irq = platform_get_irq(pdev, 0); @@ -249,21 +247,9 @@ static struct platform_driver pxa930_trkball_driver = { .name = "pxa930-trkball", }, .probe = pxa930_trkball_probe, - .remove = __devexit_p(pxa930_trkball_remove), + .remove = pxa930_trkball_remove, }; - -static int __init pxa930_trkball_init(void) -{ - return platform_driver_register(&pxa930_trkball_driver); -} - -static void __exit pxa930_trkball_exit(void) -{ - platform_driver_unregister(&pxa930_trkball_driver); -} - -module_init(pxa930_trkball_init); -module_exit(pxa930_trkball_exit); +module_platform_driver(pxa930_trkball_driver); MODULE_AUTHOR("Yong Yao <yaoyong@marvell.com>"); MODULE_DESCRIPTION("PXA930 Trackball Mouse Driver"); diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c index 272deddc8db..21c60fea5d3 100644 --- a/drivers/input/mouse/rpcmouse.c +++ b/drivers/input/mouse/rpcmouse.c @@ -42,7 +42,7 @@ static irqreturn_t rpcmouse_irq(int irq, void *dev_id) x = (short) iomd_readl(IOMD_MOUSEX); y = (short) iomd_readl(IOMD_MOUSEY); - b = (short) (__raw_readl(0xe0310000) ^ 0x70); + b = (short) (__raw_readl(IOMEM(0xe0310000)) ^ 0x70); dx = x - rpcmouse_lastx; dy = y - rpcmouse_lasty; diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 1242775fee1..cc7e0d4a8f9 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -20,8 +20,8 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/input.h> +#include <linux/input/mt.h> #include <linux/ctype.h> #include <linux/libps2.h> #include <linux/serio.h> @@ -37,8 +37,11 @@ #define FSP_CMD_TIMEOUT 200 #define FSP_CMD_TIMEOUT2 30 +#define GET_ABS_X(packet) ((packet[1] << 2) | ((packet[3] >> 2) & 0x03)) +#define GET_ABS_Y(packet) ((packet[2] << 2) | (packet[3] & 0x03)) + /** Driver version. */ -static const char fsp_drv_ver[] = "1.0.0-K"; +static const char fsp_drv_ver[] = "1.1.0-K"; /* * Make sure that the value being sent to FSP will not conflict with @@ -91,8 +94,7 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) * to do that for writes because sysfs set helper does this for * us. */ - ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); - psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + psmouse_deactivate(psmouse); ps2_begin_command(ps2dev); @@ -129,10 +131,10 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) out: ps2_end_command(ps2dev); - ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); - psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); - dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n", - reg_addr, *reg_val, rc); + psmouse_activate(psmouse); + psmouse_dbg(psmouse, + "READ REG: 0x%02x is 0x%02x (rc = %d)\n", + reg_addr, *reg_val, rc); return rc; } @@ -163,7 +165,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) - return -1; + goto out; if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { /* inversion is required */ @@ -182,8 +184,9 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) out: ps2_end_command(ps2dev); - dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n", - reg_addr, reg_val, rc); + psmouse_dbg(psmouse, + "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n", + reg_addr, reg_val, rc); return rc; } @@ -214,8 +217,7 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) unsigned char param[3]; int rc = -1; - ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); - psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + psmouse_deactivate(psmouse); ps2_begin_command(ps2dev); @@ -240,10 +242,10 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) out: ps2_end_command(ps2dev); - ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); - psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); - dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n", - *reg_val, rc); + psmouse_activate(psmouse); + psmouse_dbg(psmouse, + "READ PAGE REG: 0x%02x (rc = %d)\n", + *reg_val, rc); return rc; } @@ -262,7 +264,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) - return -1; + goto out; if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { ps2_sendbyte(ps2dev, 0x47, FSP_CMD_TIMEOUT2); @@ -279,8 +281,9 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) out: ps2_end_command(ps2dev); - dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n", - reg_val, rc); + psmouse_dbg(psmouse, + "WRITE PAGE REG: to 0x%02x (rc = %d)\n", + reg_val, rc); return rc; } @@ -300,6 +303,27 @@ static int fsp_get_revision(struct psmouse *psmouse, int *rev) return 0; } +static int fsp_get_sn(struct psmouse *psmouse, int *sn) +{ + int v0, v1, v2; + int rc = -EIO; + + /* production number since Cx is available at: 0x0b40 ~ 0x0b42 */ + if (fsp_page_reg_write(psmouse, FSP_PAGE_0B)) + goto out; + if (fsp_reg_read(psmouse, FSP_REG_SN0, &v0)) + goto out; + if (fsp_reg_read(psmouse, FSP_REG_SN1, &v1)) + goto out; + if (fsp_reg_read(psmouse, FSP_REG_SN2, &v2)) + goto out; + *sn = (v0 << 16) | (v1 << 8) | v2; + rc = 0; +out: + fsp_page_reg_write(psmouse, FSP_PAGE_DEFAULT); + return rc; +} + static int fsp_get_buttons(struct psmouse *psmouse, int *btn) { static const int buttons[] = { @@ -310,7 +334,7 @@ static int fsp_get_buttons(struct psmouse *psmouse, int *btn) }; int val; - if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS1, &val) == -1) + if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS, &val) == -1) return -EIO; *btn = buttons[(val & 0x30) >> 4]; @@ -324,7 +348,7 @@ static int fsp_opc_tag_enable(struct psmouse *psmouse, bool enable) int res = 0; if (fsp_reg_read(psmouse, FSP_REG_OPC_QDOWN, &v) == -1) { - dev_err(&psmouse->ps2dev.serio->dev, "Unable get OPC state.\n"); + psmouse_err(psmouse, "Unable get OPC state.\n"); return -EIO; } @@ -341,8 +365,7 @@ static int fsp_opc_tag_enable(struct psmouse *psmouse, bool enable) } if (res != 0) { - dev_err(&psmouse->ps2dev.serio->dev, - "Unable to enable OPC tag.\n"); + psmouse_err(psmouse, "Unable to enable OPC tag.\n"); res = -EIO; } @@ -409,7 +432,7 @@ static int fsp_onpad_hscr(struct psmouse *psmouse, bool enable) static ssize_t fsp_attr_set_setreg(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long reg, val; + int reg, val; char *rest; ssize_t retval; @@ -417,7 +440,11 @@ static ssize_t fsp_attr_set_setreg(struct psmouse *psmouse, void *data, if (rest == buf || *rest != ' ' || reg > 0xff) return -EINVAL; - if (strict_strtoul(rest + 1, 16, &val) || val > 0xff) + retval = kstrtoint(rest + 1, 16, &val); + if (retval) + return retval; + + if (val > 0xff) return -EINVAL; if (fsp_reg_write_enable(psmouse, true)) @@ -449,10 +476,13 @@ static ssize_t fsp_attr_set_getreg(struct psmouse *psmouse, void *data, const char *buf, size_t count) { struct fsp_data *pad = psmouse->private; - unsigned long reg; - int val; + int reg, val, err; - if (strict_strtoul(buf, 16, ®) || reg > 0xff) + err = kstrtoint(buf, 16, ®); + if (err) + return err; + + if (reg > 0xff) return -EINVAL; if (fsp_reg_read(psmouse, reg, &val)) @@ -481,9 +511,13 @@ static ssize_t fsp_attr_show_pagereg(struct psmouse *psmouse, static ssize_t fsp_attr_set_pagereg(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long val; + int val, err; + + err = kstrtoint(buf, 16, &val); + if (err) + return err; - if (strict_strtoul(buf, 16, &val) || val > 0xff) + if (val > 0xff) return -EINVAL; if (fsp_page_reg_write(psmouse, val)) @@ -506,9 +540,14 @@ static ssize_t fsp_attr_show_vscroll(struct psmouse *psmouse, static ssize_t fsp_attr_set_vscroll(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long val; + unsigned int val; + int err; - if (strict_strtoul(buf, 10, &val) || val > 1) + err = kstrtouint(buf, 10, &val); + if (err) + return err; + + if (val > 1) return -EINVAL; fsp_onpad_vscr(psmouse, val); @@ -530,9 +569,14 @@ static ssize_t fsp_attr_show_hscroll(struct psmouse *psmouse, static ssize_t fsp_attr_set_hscroll(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long val; + unsigned int val; + int err; + + err = kstrtouint(buf, 10, &val); + if (err) + return err; - if (strict_strtoul(buf, 10, &val) || val > 1) + if (val > 1) return -EINVAL; fsp_onpad_hscr(psmouse, val); @@ -599,36 +643,71 @@ static struct attribute_group fsp_attribute_group = { .attrs = fsp_attributes, }; -#ifdef FSP_DEBUG -static void fsp_packet_debug(unsigned char packet[]) +#ifdef FSP_DEBUG +static void fsp_packet_debug(struct psmouse *psmouse, unsigned char packet[]) { static unsigned int ps2_packet_cnt; static unsigned int ps2_last_second; unsigned int jiffies_msec; + const char *packet_type = "UNKNOWN"; + unsigned short abs_x = 0, abs_y = 0; + + /* Interpret & dump the packet data. */ + switch (packet[0] >> FSP_PKT_TYPE_SHIFT) { + case FSP_PKT_TYPE_ABS: + packet_type = "Absolute"; + abs_x = GET_ABS_X(packet); + abs_y = GET_ABS_Y(packet); + break; + case FSP_PKT_TYPE_NORMAL: + packet_type = "Normal"; + break; + case FSP_PKT_TYPE_NOTIFY: + packet_type = "Notify"; + break; + case FSP_PKT_TYPE_NORMAL_OPC: + packet_type = "Normal-OPC"; + break; + } ps2_packet_cnt++; jiffies_msec = jiffies_to_msecs(jiffies); - printk(KERN_DEBUG "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n", - jiffies_msec, packet[0], packet[1], packet[2], packet[3]); + psmouse_dbg(psmouse, + "%08dms %s packets: %02x, %02x, %02x, %02x; " + "abs_x: %d, abs_y: %d\n", + jiffies_msec, packet_type, + packet[0], packet[1], packet[2], packet[3], abs_x, abs_y); if (jiffies_msec - ps2_last_second > 1000) { - printk(KERN_DEBUG "PS/2 packets/sec = %d\n", ps2_packet_cnt); + psmouse_dbg(psmouse, "PS/2 packets/sec = %d\n", ps2_packet_cnt); ps2_packet_cnt = 0; ps2_last_second = jiffies_msec; } } #else -static void fsp_packet_debug(unsigned char packet[]) +static void fsp_packet_debug(struct psmouse *psmouse, unsigned char packet[]) { } #endif +static void fsp_set_slot(struct input_dev *dev, int slot, bool active, + unsigned int x, unsigned int y) +{ + input_mt_slot(dev, slot); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); + if (active) { + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + } +} + static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; struct fsp_data *ad = psmouse->private; unsigned char *packet = psmouse->packet; unsigned char button_status = 0, lscroll = 0, rscroll = 0; + unsigned short abs_x, abs_y, fgrs = 0; int rel_x, rel_y; if (psmouse->pktcnt < 4) @@ -638,16 +717,95 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) * Full packet accumulated, process it */ + fsp_packet_debug(psmouse, packet); + switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) { case FSP_PKT_TYPE_ABS: - dev_warn(&psmouse->ps2dev.serio->dev, - "Unexpected absolute mode packet, ignored.\n"); + + if ((packet[0] == 0x48 || packet[0] == 0x49) && + packet[1] == 0 && packet[2] == 0) { + /* + * Ignore coordinate noise when finger leaving the + * surface, otherwise cursor may jump to upper-left + * corner. + */ + packet[3] &= 0xf0; + } + + abs_x = GET_ABS_X(packet); + abs_y = GET_ABS_Y(packet); + + if (packet[0] & FSP_PB0_MFMC) { + /* + * MFMC packet: assume that there are two fingers on + * pad + */ + fgrs = 2; + + /* MFMC packet */ + if (packet[0] & FSP_PB0_MFMC_FGR2) { + /* 2nd finger */ + if (ad->last_mt_fgr == 2) { + /* + * workaround for buggy firmware + * which doesn't clear MFMC bit if + * the 1st finger is up + */ + fgrs = 1; + fsp_set_slot(dev, 0, false, 0, 0); + } + ad->last_mt_fgr = 2; + + fsp_set_slot(dev, 1, fgrs == 2, abs_x, abs_y); + } else { + /* 1st finger */ + if (ad->last_mt_fgr == 1) { + /* + * workaround for buggy firmware + * which doesn't clear MFMC bit if + * the 2nd finger is up + */ + fgrs = 1; + fsp_set_slot(dev, 1, false, 0, 0); + } + ad->last_mt_fgr = 1; + fsp_set_slot(dev, 0, fgrs != 0, abs_x, abs_y); + } + } else { + /* SFAC packet */ + if ((packet[0] & (FSP_PB0_LBTN|FSP_PB0_PHY_BTN)) == + FSP_PB0_LBTN) { + /* On-pad click in SFAC mode should be handled + * by userspace. On-pad clicks in MFMC mode + * are real clickpad clicks, and not ignored. + */ + packet[0] &= ~FSP_PB0_LBTN; + } + + /* no multi-finger information */ + ad->last_mt_fgr = 0; + + if (abs_x != 0 && abs_y != 0) + fgrs = 1; + + fsp_set_slot(dev, 0, fgrs > 0, abs_x, abs_y); + fsp_set_slot(dev, 1, false, 0, 0); + } + if (fgrs == 1 || (fgrs == 2 && !(packet[0] & FSP_PB0_MFMC_FGR2))) { + input_report_abs(dev, ABS_X, abs_x); + input_report_abs(dev, ABS_Y, abs_y); + } + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + input_report_key(dev, BTN_TOUCH, fgrs); + input_report_key(dev, BTN_TOOL_FINGER, fgrs == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fgrs == 2); break; case FSP_PKT_TYPE_NORMAL_OPC: /* on-pad click, filter it if necessary */ if ((ad->flags & FSPDRV_FLAG_EN_OPC) != FSPDRV_FLAG_EN_OPC) - packet[0] &= ~BIT(0); + packet[0] &= ~FSP_PB0_LBTN; /* fall through */ case FSP_PKT_TYPE_NORMAL: @@ -694,8 +852,6 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) input_sync(dev); - fsp_packet_debug(packet); - return PSMOUSE_FULL_PACKET; } @@ -719,42 +875,106 @@ static int fsp_activate_protocol(struct psmouse *psmouse) ps2_command(ps2dev, param, PSMOUSE_CMD_GETID); if (param[0] != 0x04) { - dev_err(&psmouse->ps2dev.serio->dev, - "Unable to enable 4 bytes packet format.\n"); + psmouse_err(psmouse, + "Unable to enable 4 bytes packet format.\n"); return -EIO; } - if (fsp_reg_read(psmouse, FSP_REG_SYSCTL5, &val)) { - dev_err(&psmouse->ps2dev.serio->dev, - "Unable to read SYSCTL5 register.\n"); - return -EIO; - } + if (pad->ver < FSP_VER_STL3888_C0) { + /* Preparing relative coordinates output for older hardware */ + if (fsp_reg_read(psmouse, FSP_REG_SYSCTL5, &val)) { + psmouse_err(psmouse, + "Unable to read SYSCTL5 register.\n"); + return -EIO; + } - val &= ~(FSP_BIT_EN_MSID7 | FSP_BIT_EN_MSID8 | FSP_BIT_EN_AUTO_MSID8); - /* Ensure we are not in absolute mode */ - val &= ~FSP_BIT_EN_PKT_G0; - if (pad->buttons == 0x06) { - /* Left/Middle/Right & Scroll Up/Down/Right/Left */ - val |= FSP_BIT_EN_MSID6; - } + if (fsp_get_buttons(psmouse, &pad->buttons)) { + psmouse_err(psmouse, + "Unable to retrieve number of buttons.\n"); + return -EIO; + } - if (fsp_reg_write(psmouse, FSP_REG_SYSCTL5, val)) { - dev_err(&psmouse->ps2dev.serio->dev, - "Unable to set up required mode bits.\n"); - return -EIO; + val &= ~(FSP_BIT_EN_MSID7 | FSP_BIT_EN_MSID8 | FSP_BIT_EN_AUTO_MSID8); + /* Ensure we are not in absolute mode */ + val &= ~FSP_BIT_EN_PKT_G0; + if (pad->buttons == 0x06) { + /* Left/Middle/Right & Scroll Up/Down/Right/Left */ + val |= FSP_BIT_EN_MSID6; + } + + if (fsp_reg_write(psmouse, FSP_REG_SYSCTL5, val)) { + psmouse_err(psmouse, + "Unable to set up required mode bits.\n"); + return -EIO; + } + + /* + * Enable OPC tags such that driver can tell the difference + * between on-pad and real button click + */ + if (fsp_opc_tag_enable(psmouse, true)) + psmouse_warn(psmouse, + "Failed to enable OPC tag mode.\n"); + /* enable on-pad click by default */ + pad->flags |= FSPDRV_FLAG_EN_OPC; + + /* Enable on-pad vertical and horizontal scrolling */ + fsp_onpad_vscr(psmouse, true); + fsp_onpad_hscr(psmouse, true); + } else { + /* Enable absolute coordinates output for Cx/Dx hardware */ + if (fsp_reg_write(psmouse, FSP_REG_SWC1, + FSP_BIT_SWC1_EN_ABS_1F | + FSP_BIT_SWC1_EN_ABS_2F | + FSP_BIT_SWC1_EN_FUP_OUT | + FSP_BIT_SWC1_EN_ABS_CON)) { + psmouse_err(psmouse, + "Unable to enable absolute coordinates output.\n"); + return -EIO; + } } - /* - * Enable OPC tags such that driver can tell the difference between - * on-pad and real button click - */ - if (fsp_opc_tag_enable(psmouse, true)) - dev_warn(&psmouse->ps2dev.serio->dev, - "Failed to enable OPC tag mode.\n"); + return 0; +} - /* Enable on-pad vertical and horizontal scrolling */ - fsp_onpad_vscr(psmouse, true); - fsp_onpad_hscr(psmouse, true); +static int fsp_set_input_params(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct fsp_data *pad = psmouse->private; + + if (pad->ver < FSP_VER_STL3888_C0) { + __set_bit(BTN_MIDDLE, dev->keybit); + __set_bit(BTN_BACK, dev->keybit); + __set_bit(BTN_FORWARD, dev->keybit); + __set_bit(REL_WHEEL, dev->relbit); + __set_bit(REL_HWHEEL, dev->relbit); + } else { + /* + * Hardware prior to Cx performs much better in relative mode; + * hence, only enable absolute coordinates output as well as + * multi-touch output for the newer hardware. + * + * Maximum coordinates can be computed as: + * + * number of scanlines * 64 - 57 + * + * where number of X/Y scanline lines are 16/12. + */ + int abs_x = 967, abs_y = 711; + + __set_bit(EV_ABS, dev->evbit); + __clear_bit(EV_REL, dev->evbit); + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_FINGER, dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); + + input_set_abs_params(dev, ABS_X, 0, abs_x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, abs_y, 0, 0); + input_mt_init_slots(dev, 2, 0); + input_set_abs_params(dev, ABS_MT_POSITION_X, 0, abs_x, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, abs_y, 0, 0); + } return 0; } @@ -812,18 +1032,21 @@ static int fsp_reconnect(struct psmouse *psmouse) int fsp_init(struct psmouse *psmouse) { struct fsp_data *priv; - int ver, rev, buttons; + int ver, rev, sn = 0; int error; if (fsp_get_version(psmouse, &ver) || - fsp_get_revision(psmouse, &rev) || - fsp_get_buttons(psmouse, &buttons)) { + fsp_get_revision(psmouse, &rev)) { return -ENODEV; } + if (ver >= FSP_VER_STL3888_C0) { + /* firmware information is only available since C0 */ + fsp_get_sn(psmouse, &sn); + } - printk(KERN_INFO - "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n", - ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7); + psmouse_info(psmouse, + "Finger Sensing Pad, hw: %d.%d.%d, sn: %x, sw: %s\n", + ver >> 4, ver & 0x0F, rev, sn, fsp_drv_ver); psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL); if (!priv) @@ -831,17 +1054,6 @@ int fsp_init(struct psmouse *psmouse) priv->ver = ver; priv->rev = rev; - priv->buttons = buttons; - - /* enable on-pad click by default */ - priv->flags |= FSPDRV_FLAG_EN_OPC; - - /* Set up various supported input event bits */ - __set_bit(BTN_MIDDLE, psmouse->dev->keybit); - __set_bit(BTN_BACK, psmouse->dev->keybit); - __set_bit(BTN_FORWARD, psmouse->dev->keybit); - __set_bit(REL_WHEEL, psmouse->dev->relbit); - __set_bit(REL_HWHEEL, psmouse->dev->relbit); psmouse->protocol_handler = fsp_process_byte; psmouse->disconnect = fsp_disconnect; @@ -849,16 +1061,20 @@ int fsp_init(struct psmouse *psmouse) psmouse->cleanup = fsp_reset; psmouse->pktsize = 4; - /* set default packet output based on number of buttons we found */ error = fsp_activate_protocol(psmouse); if (error) goto err_out; + /* Set up various supported input event bits */ + error = fsp_set_input_params(psmouse); + if (error) + goto err_out; + error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, &fsp_attribute_group); if (error) { - dev_err(&psmouse->ps2dev.serio->dev, - "Failed to create sysfs attributes (%d)", error); + psmouse_err(psmouse, + "Failed to create sysfs attributes (%d)", error); goto err_out; } diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h index ed1395ac7b8..aa697ece405 100644 --- a/drivers/input/mouse/sentelic.h +++ b/drivers/input/mouse/sentelic.h @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -33,6 +33,7 @@ /* Finger-sensing Pad control registers */ #define FSP_REG_SYSCTL1 0x10 #define FSP_BIT_EN_REG_CLK BIT(5) +#define FSP_REG_TMOD_STATUS 0x20 #define FSP_REG_OPC_QDOWN 0x31 #define FSP_BIT_EN_OPC_TAG BIT(7) #define FSP_REG_OPTZ_XLO 0x34 @@ -54,6 +55,24 @@ #define FSP_BIT_FIX_HSCR BIT(5) #define FSP_BIT_DRAG_LOCK BIT(6) +#define FSP_REG_SWC1 (0x90) +#define FSP_BIT_SWC1_EN_ABS_1F BIT(0) +#define FSP_BIT_SWC1_EN_GID BIT(1) +#define FSP_BIT_SWC1_EN_ABS_2F BIT(2) +#define FSP_BIT_SWC1_EN_FUP_OUT BIT(3) +#define FSP_BIT_SWC1_EN_ABS_CON BIT(4) +#define FSP_BIT_SWC1_GST_GRP0 BIT(5) +#define FSP_BIT_SWC1_GST_GRP1 BIT(6) +#define FSP_BIT_SWC1_BX_COMPAT BIT(7) + +#define FSP_PAGE_0B (0x0b) +#define FSP_PAGE_82 (0x82) +#define FSP_PAGE_DEFAULT FSP_PAGE_82 + +#define FSP_REG_SN0 (0x40) +#define FSP_REG_SN1 (0x41) +#define FSP_REG_SN2 (0x42) + /* Finger-sensing Pad packet formating related definitions */ /* absolute packet type */ @@ -63,12 +82,32 @@ #define FSP_PKT_TYPE_NORMAL_OPC (0x03) #define FSP_PKT_TYPE_SHIFT (6) +/* bit definitions for the first byte of report packet */ +#define FSP_PB0_LBTN BIT(0) +#define FSP_PB0_RBTN BIT(1) +#define FSP_PB0_MBTN BIT(2) +#define FSP_PB0_MFMC_FGR2 FSP_PB0_MBTN +#define FSP_PB0_MUST_SET BIT(3) +#define FSP_PB0_PHY_BTN BIT(4) +#define FSP_PB0_MFMC BIT(5) + +/* hardware revisions */ +#define FSP_VER_STL3888_A4 (0xC1) +#define FSP_VER_STL3888_B0 (0xD0) +#define FSP_VER_STL3888_B1 (0xD1) +#define FSP_VER_STL3888_B2 (0xD2) +#define FSP_VER_STL3888_C0 (0xE0) +#define FSP_VER_STL3888_C1 (0xE1) +#define FSP_VER_STL3888_D0 (0xE2) +#define FSP_VER_STL3888_D1 (0xE3) +#define FSP_VER_STL3888_E0 (0xE4) + #ifdef __KERNEL__ struct fsp_data { unsigned char ver; /* hardware version */ unsigned char rev; /* hardware revison */ - unsigned char buttons; /* Number of buttons */ + unsigned int buttons; /* Number of buttons */ unsigned int flags; #define FSPDRV_FLAG_EN_OPC (0x001) /* enable on-pad clicking */ @@ -77,6 +116,7 @@ struct fsp_data { unsigned char last_reg; /* Last register we requested read from */ unsigned char last_val; + unsigned int last_mt_fgr; /* Last seen finger(multitouch) */ }; #ifdef CONFIG_MOUSE_PS2_SENTELIC diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c index 17ff137b9bd..8df526620eb 100644 --- a/drivers/input/mouse/sermouse.c +++ b/drivers/input/mouse/sermouse.c @@ -32,7 +32,6 @@ #include <linux/interrupt.h> #include <linux/input.h> #include <linux/serio.h> -#include <linux/init.h> #define DRIVER_DESC "Serial mouse driver" @@ -355,15 +354,4 @@ static struct serio_driver sermouse_drv = { .disconnect = sermouse_disconnect, }; -static int __init sermouse_init(void) -{ - return serio_register_driver(&sermouse_drv); -} - -static void __exit sermouse_exit(void) -{ - serio_unregister_driver(&sermouse_drv); -} - -module_init(sermouse_init); -module_exit(sermouse_exit); +module_serio_driver(sermouse_drv); diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index aa186cf6c51..ef9e0b8a9aa 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -24,6 +24,7 @@ */ #include <linux/module.h> +#include <linux/delay.h> #include <linux/dmi.h> #include <linux/input/mt.h> #include <linux/serio.h> @@ -39,11 +40,32 @@ * Note that newer firmware allows querying device for maximum useable * coordinates. */ +#define XMIN 0 +#define XMAX 6143 +#define YMIN 0 +#define YMAX 6143 #define XMIN_NOMINAL 1472 #define XMAX_NOMINAL 5472 #define YMIN_NOMINAL 1408 #define YMAX_NOMINAL 4448 +/* Size in bits of absolute position values reported by the hardware */ +#define ABS_POS_BITS 13 + +/* + * These values should represent the absolute maximum value that will + * be reported for a positive position value. Some Synaptics firmware + * uses this value to indicate a finger near the edge of the touchpad + * whose precise position cannot be determined. + * + * At least one touchpad is known to report positions in excess of this + * value which are actually negative values truncated to the 13-bit + * reporting range. These values have never been observed to be lower + * than 8184 (i.e. -8), so we treat all values greater than 8176 as + * negative and any other value as positive. + */ +#define X_MAX_POSITIVE 8176 +#define Y_MAX_POSITIVE 8176 /***************************************************************************** * Stuff we need even when we do not want native Synaptics support @@ -95,12 +117,98 @@ void synaptics_reset(struct psmouse *psmouse) } #ifdef CONFIG_MOUSE_PS2_SYNAPTICS +struct min_max_quirk { + const char * const *pnp_ids; + int x_min, x_max, y_min, y_max; +}; + +static const struct min_max_quirk min_max_pnpid_table[] = { + { + (const char * const []){"LEN0033", NULL}, + 1024, 5052, 2258, 4832 + }, + { + (const char * const []){"LEN0035", "LEN0042", NULL}, + 1232, 5710, 1156, 4696 + }, + { + (const char * const []){"LEN0034", "LEN0036", "LEN2002", + "LEN2004", NULL}, + 1024, 5112, 2024, 4832 + }, + { + (const char * const []){"LEN2001", NULL}, + 1024, 5022, 2508, 4832 + }, + { } +}; + +/* This list has been kindly provided by Synaptics. */ +static const char * const topbuttonpad_pnp_ids[] = { + "LEN0017", + "LEN0018", + "LEN0019", + "LEN0023", + "LEN002A", + "LEN002B", + "LEN002C", + "LEN002D", + "LEN002E", + "LEN0033", /* Helix */ + "LEN0034", /* T431s, L440, L540, T540, W540, X1 Carbon 2nd */ + "LEN0035", /* X240 */ + "LEN0036", /* T440 */ + "LEN0037", + "LEN0038", + "LEN0041", + "LEN0042", /* Yoga */ + "LEN0045", + "LEN0046", + "LEN0047", + "LEN0048", + "LEN0049", + "LEN2000", + "LEN2001", /* Edge E431 */ + "LEN2002", /* Edge E531 */ + "LEN2003", + "LEN2004", /* L440 */ + "LEN2005", + "LEN2006", + "LEN2007", + "LEN2008", + "LEN2009", + "LEN200A", + "LEN200B", + NULL +}; + +static bool matches_pnp_id(struct psmouse *psmouse, const char * const ids[]) +{ + int i; + + if (!strncmp(psmouse->ps2dev.serio->firmware_id, "PNP:", 4)) + for (i = 0; ids[i]; i++) + if (strstr(psmouse->ps2dev.serio->firmware_id, ids[i])) + return true; + + return false; +} /***************************************************************************** * Synaptics communications functions ****************************************************************************/ /* + * Synaptics touchpads report the y coordinate from bottom to top, which is + * opposite from what userspace expects. + * This function is used to invert y before reporting. + */ +static int synaptics_invert_y(int y) +{ + return YMAX_NOMINAL + YMIN_NOMINAL - y; +} + +/* * Send a command to the synpatics touchpad by special commands */ static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, unsigned char *param) @@ -128,6 +236,35 @@ static int synaptics_model_id(struct psmouse *psmouse) } /* + * Read the board id from the touchpad + * The board id is encoded in the "QUERY MODES" response + */ +static int synaptics_board_id(struct psmouse *psmouse) +{ + struct synaptics_data *priv = psmouse->private; + unsigned char bid[3]; + + if (synaptics_send_cmd(psmouse, SYN_QUE_MODES, bid)) + return -1; + priv->board_id = ((bid[0] & 0xfc) << 6) | bid[1]; + return 0; +} + +/* + * Read the firmware id from the touchpad + */ +static int synaptics_firmware_id(struct psmouse *psmouse) +{ + struct synaptics_data *priv = psmouse->private; + unsigned char fwid[3]; + + if (synaptics_send_cmd(psmouse, SYN_QUE_FIRMWARE_ID, fwid)) + return -1; + priv->firmware_id = (fwid[0] << 16) | (fwid[1] << 8) | fwid[2]; + return 0; +} + +/* * Read the capability-bits from the touchpad * see also the SYN_CAP_* macros */ @@ -157,8 +294,8 @@ static int synaptics_capability(struct psmouse *psmouse) if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) { - printk(KERN_ERR "Synaptics claims to have extended capabilities," - " but I'm not able to read them.\n"); + psmouse_warn(psmouse, + "device claims to have extended capabilities, but I'm not able to read them.\n"); } else { priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2]; @@ -173,8 +310,8 @@ static int synaptics_capability(struct psmouse *psmouse) if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) { - printk(KERN_ERR "Synaptics claims to have extended capability 0x0c," - " but I'm not able to read it.\n"); + psmouse_warn(psmouse, + "device claims to have extended capability 0x0c, but I'm not able to read it.\n"); } else { priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2]; } @@ -204,30 +341,52 @@ static int synaptics_identify(struct psmouse *psmouse) * Read touchpad resolution and maximum reported coordinates * Resolution is left zero if touchpad does not support the query */ + static int synaptics_resolution(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; - unsigned char res[3]; - unsigned char max[3]; + unsigned char resp[3]; + int i; if (SYN_ID_MAJOR(priv->identity) < 4) return 0; - if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) { - if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) { - priv->x_res = res[0]; /* x resolution in units/mm */ - priv->y_res = res[2]; /* y resolution in units/mm */ + if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, resp) == 0) { + if (resp[0] != 0 && (resp[1] & 0x80) && resp[2] != 0) { + priv->x_res = resp[0]; /* x resolution in units/mm */ + priv->y_res = resp[2]; /* y resolution in units/mm */ + } + } + + for (i = 0; min_max_pnpid_table[i].pnp_ids; i++) { + if (matches_pnp_id(psmouse, min_max_pnpid_table[i].pnp_ids)) { + priv->x_min = min_max_pnpid_table[i].x_min; + priv->x_max = min_max_pnpid_table[i].x_max; + priv->y_min = min_max_pnpid_table[i].y_min; + priv->y_max = min_max_pnpid_table[i].y_max; + return 0; } } if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 && SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) { - if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_DIMENSIONS, max)) { - printk(KERN_ERR "Synaptics claims to have dimensions query," - " but I'm not able to read it.\n"); + if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) { + psmouse_warn(psmouse, + "device claims to have max coordinates query, but I'm not able to read it.\n"); + } else { + priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); + priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); + } + } + + if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 && + SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) { + if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) { + psmouse_warn(psmouse, + "device claims to have min coordinates query, but I'm not able to read it.\n"); } else { - priv->x_max = (max[0] << 5) | ((max[1] & 0x0f) << 1); - priv->y_max = (max[2] << 5) | ((max[1] & 0xf0) >> 3); + priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); + priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); } } @@ -240,6 +399,10 @@ static int synaptics_query_hardware(struct psmouse *psmouse) return -1; if (synaptics_model_id(psmouse)) return -1; + if (synaptics_firmware_id(psmouse)) + return -1; + if (synaptics_board_id(psmouse)) + return -1; if (synaptics_capability(psmouse)) return -1; if (synaptics_resolution(psmouse)) @@ -248,19 +411,50 @@ static int synaptics_query_hardware(struct psmouse *psmouse) return 0; } -static int synaptics_set_absolute_mode(struct psmouse *psmouse) +static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) +{ + static unsigned char param = 0xc8; + struct synaptics_data *priv = psmouse->private; + + if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || + SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c))) + return 0; + + if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL)) + return -1; + + if (ps2_command(&psmouse->ps2dev, ¶m, PSMOUSE_CMD_SETRATE)) + return -1; + + /* Advanced gesture mode also sends multi finger data */ + priv->capabilities |= BIT(1); + + return 0; +} + +static int synaptics_set_mode(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; - priv->mode = SYN_BIT_ABSOLUTE_MODE; - if (SYN_ID_MAJOR(priv->identity) >= 4) + priv->mode = 0; + if (priv->absolute_mode) + priv->mode |= SYN_BIT_ABSOLUTE_MODE; + if (priv->disable_gesture) priv->mode |= SYN_BIT_DISABLE_GESTURE; + if (psmouse->rate >= 80) + priv->mode |= SYN_BIT_HIGH_RATE; if (SYN_CAP_EXTENDED(priv->capabilities)) priv->mode |= SYN_BIT_W_MODE; if (synaptics_mode_cmd(psmouse, priv->mode)) return -1; + if (priv->absolute_mode && + synaptics_set_advanced_gesture_mode(psmouse)) { + psmouse_err(psmouse, "Advanced gesture mode init failed.\n"); + return -1; + } + return 0; } @@ -279,25 +473,6 @@ static void synaptics_set_rate(struct psmouse *psmouse, unsigned int rate) synaptics_mode_cmd(psmouse, priv->mode); } -static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) -{ - static unsigned char param = 0xc8; - struct synaptics_data *priv = psmouse->private; - - if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) - return 0; - - if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL)) - return -1; - if (ps2_command(&psmouse->ps2dev, ¶m, PSMOUSE_CMD_SETRATE)) - return -1; - - /* Advanced gesture mode also sends multi finger data */ - priv->capabilities |= BIT(1); - - return 0; -} - /***************************************************************************** * Synaptics pass-through PS/2 port support ****************************************************************************/ @@ -367,7 +542,8 @@ static void synaptics_pt_activate(struct psmouse *psmouse) priv->mode &= ~SYN_BIT_FOUR_BYTE_CLIENT; if (synaptics_mode_cmd(psmouse, priv->mode)) - printk(KERN_INFO "synaptics: failed to switch guest protocol\n"); + psmouse_warn(psmouse, + "failed to switch guest protocol\n"); } } @@ -377,7 +553,8 @@ static void synaptics_pt_create(struct psmouse *psmouse) serio = kzalloc(sizeof(struct serio), GFP_KERNEL); if (!serio) { - printk(KERN_ERR "synaptics: not enough memory to allocate pass-through port\n"); + psmouse_err(psmouse, + "not enough memory for pass-through port\n"); return; } @@ -391,7 +568,8 @@ static void synaptics_pt_create(struct psmouse *psmouse) psmouse->pt_activate = synaptics_pt_activate; - printk(KERN_INFO "serio: %s port at %s\n", serio->name, psmouse->phys); + psmouse_info(psmouse, "serio: %s port at %s\n", + serio->name, psmouse->phys); serio_register_port(serio); } @@ -399,6 +577,44 @@ static void synaptics_pt_create(struct psmouse *psmouse) * Functions to interpret the absolute mode packets ****************************************************************************/ +static void synaptics_mt_state_set(struct synaptics_mt_state *state, int count, + int sgm, int agm) +{ + state->count = count; + state->sgm = sgm; + state->agm = agm; +} + +static void synaptics_parse_agm(const unsigned char buf[], + struct synaptics_data *priv, + struct synaptics_hw_state *hw) +{ + struct synaptics_hw_state *agm = &priv->agm; + int agm_packet_type; + + agm_packet_type = (buf[5] & 0x30) >> 4; + switch (agm_packet_type) { + case 1: + /* Gesture packet: (x, y, z) half resolution */ + agm->w = hw->w; + agm->x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1; + agm->y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1; + agm->z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1; + break; + + case 2: + /* AGM-CONTACT packet: (count, sgm, agm) */ + synaptics_mt_state_set(&agm->mt_state, buf[1], buf[2], buf[4]); + break; + + default: + break; + } + + /* Record that at least one AGM has been received since last SGM */ + priv->agm_pending = true; +} + static int synaptics_parse_hw_state(const unsigned char buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw) @@ -406,26 +622,10 @@ static int synaptics_parse_hw_state(const unsigned char buf[], memset(hw, 0, sizeof(struct synaptics_hw_state)); if (SYN_MODEL_NEWABS(priv->model_id)) { - hw->x = (((buf[3] & 0x10) << 8) | - ((buf[1] & 0x0f) << 8) | - buf[4]); - hw->y = (((buf[3] & 0x20) << 7) | - ((buf[1] & 0xf0) << 4) | - buf[5]); - - hw->z = buf[2]; hw->w = (((buf[0] & 0x30) >> 2) | ((buf[0] & 0x04) >> 1) | ((buf[3] & 0x04) >> 2)); - if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) { - /* Gesture packet: (x, y, z) at half resolution */ - priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1; - priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1; - priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1; - return 1; - } - hw->left = (buf[0] & 0x01) ? 1 : 0; hw->right = (buf[0] & 0x02) ? 1 : 0; @@ -448,6 +648,21 @@ static int synaptics_parse_hw_state(const unsigned char buf[], hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0; } + if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || + SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) && + hw->w == 2) { + synaptics_parse_agm(buf, priv, hw); + return 1; + } + + hw->x = (((buf[3] & 0x10) << 8) | + ((buf[1] & 0x0f) << 8) | + buf[4]); + hw->y = (((buf[3] & 0x20) << 7) | + ((buf[1] & 0xf0) << 4) | + buf[5]); + hw->z = buf[2]; + if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) && ((buf[0] ^ buf[3]) & 0x02)) { switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) { @@ -482,17 +697,33 @@ static int synaptics_parse_hw_state(const unsigned char buf[], hw->right = (buf[0] & 0x02) ? 1 : 0; } + /* + * Convert wrap-around values to negative. (X|Y)_MAX_POSITIVE + * is used by some firmware to indicate a finger at the edge of + * the touchpad whose precise position cannot be determined, so + * convert these values to the maximum axis value. + */ + if (hw->x > X_MAX_POSITIVE) + hw->x -= 1 << ABS_POS_BITS; + else if (hw->x == X_MAX_POSITIVE) + hw->x = XMAX; + + if (hw->y > Y_MAX_POSITIVE) + hw->y -= 1 << ABS_POS_BITS; + else if (hw->y == Y_MAX_POSITIVE) + hw->y = YMAX; + return 0; } -static void set_slot(struct input_dev *dev, int slot, bool active, int x, int y) +static void synaptics_report_semi_mt_slot(struct input_dev *dev, int slot, + bool active, int x, int y) { input_mt_slot(dev, slot); input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); if (active) { input_report_abs(dev, ABS_MT_POSITION_X, x); - input_report_abs(dev, ABS_MT_POSITION_Y, - YMAX_NOMINAL + YMIN_NOMINAL - y); + input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(y)); } } @@ -502,15 +733,423 @@ static void synaptics_report_semi_mt_data(struct input_dev *dev, int num_fingers) { if (num_fingers >= 2) { - set_slot(dev, 0, true, min(a->x, b->x), min(a->y, b->y)); - set_slot(dev, 1, true, max(a->x, b->x), max(a->y, b->y)); + synaptics_report_semi_mt_slot(dev, 0, true, min(a->x, b->x), + min(a->y, b->y)); + synaptics_report_semi_mt_slot(dev, 1, true, max(a->x, b->x), + max(a->y, b->y)); } else if (num_fingers == 1) { - set_slot(dev, 0, true, a->x, a->y); - set_slot(dev, 1, false, 0, 0); + synaptics_report_semi_mt_slot(dev, 0, true, a->x, a->y); + synaptics_report_semi_mt_slot(dev, 1, false, 0, 0); } else { - set_slot(dev, 0, false, 0, 0); - set_slot(dev, 1, false, 0, 0); + synaptics_report_semi_mt_slot(dev, 0, false, 0, 0); + synaptics_report_semi_mt_slot(dev, 1, false, 0, 0); + } +} + +static void synaptics_report_buttons(struct psmouse *psmouse, + const struct synaptics_hw_state *hw) +{ + struct input_dev *dev = psmouse->dev; + struct synaptics_data *priv = psmouse->private; + int i; + + input_report_key(dev, BTN_LEFT, hw->left); + input_report_key(dev, BTN_RIGHT, hw->right); + + if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) + input_report_key(dev, BTN_MIDDLE, hw->middle); + + if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) { + input_report_key(dev, BTN_FORWARD, hw->up); + input_report_key(dev, BTN_BACK, hw->down); } + + for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++) + input_report_key(dev, BTN_0 + i, hw->ext_buttons & (1 << i)); +} + +static void synaptics_report_slot(struct input_dev *dev, int slot, + const struct synaptics_hw_state *hw) +{ + input_mt_slot(dev, slot); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, (hw != NULL)); + if (!hw) + return; + + input_report_abs(dev, ABS_MT_POSITION_X, hw->x); + input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(hw->y)); + input_report_abs(dev, ABS_MT_PRESSURE, hw->z); +} + +static void synaptics_report_mt_data(struct psmouse *psmouse, + struct synaptics_mt_state *mt_state, + const struct synaptics_hw_state *sgm) +{ + struct input_dev *dev = psmouse->dev; + struct synaptics_data *priv = psmouse->private; + struct synaptics_hw_state *agm = &priv->agm; + struct synaptics_mt_state *old = &priv->mt_state; + + switch (mt_state->count) { + case 0: + synaptics_report_slot(dev, 0, NULL); + synaptics_report_slot(dev, 1, NULL); + break; + case 1: + if (mt_state->sgm == -1) { + synaptics_report_slot(dev, 0, NULL); + synaptics_report_slot(dev, 1, NULL); + } else if (mt_state->sgm == 0) { + synaptics_report_slot(dev, 0, sgm); + synaptics_report_slot(dev, 1, NULL); + } else { + synaptics_report_slot(dev, 0, NULL); + synaptics_report_slot(dev, 1, sgm); + } + break; + default: + /* + * If the finger slot contained in SGM is valid, and either + * hasn't changed, or is new, or the old SGM has now moved to + * AGM, then report SGM in MTB slot 0. + * Otherwise, empty MTB slot 0. + */ + if (mt_state->sgm != -1 && + (mt_state->sgm == old->sgm || + old->sgm == -1 || mt_state->agm == old->sgm)) + synaptics_report_slot(dev, 0, sgm); + else + synaptics_report_slot(dev, 0, NULL); + + /* + * If the finger slot contained in AGM is valid, and either + * hasn't changed, or is new, then report AGM in MTB slot 1. + * Otherwise, empty MTB slot 1. + * + * However, in the case where the AGM is new, make sure that + * that it is either the same as the old SGM, or there was no + * SGM. + * + * Otherwise, if the SGM was just 1, and the new AGM is 2, then + * the new AGM will keep the old SGM's tracking ID, which can + * cause apparent drumroll. This happens if in the following + * valid finger sequence: + * + * Action SGM AGM (MTB slot:Contact) + * 1. Touch contact 0 (0:0) + * 2. Touch contact 1 (0:0, 1:1) + * 3. Lift contact 0 (1:1) + * 4. Touch contacts 2,3 (0:2, 1:3) + * + * In step 4, contact 3, in AGM must not be given the same + * tracking ID as contact 1 had in step 3. To avoid this, + * the first agm with contact 3 is dropped and slot 1 is + * invalidated (tracking ID = -1). + */ + if (mt_state->agm != -1 && + (mt_state->agm == old->agm || + (old->agm == -1 && + (old->sgm == -1 || mt_state->agm == old->sgm)))) + synaptics_report_slot(dev, 1, agm); + else + synaptics_report_slot(dev, 1, NULL); + break; + } + + /* Don't use active slot count to generate BTN_TOOL events. */ + input_mt_report_pointer_emulation(dev, false); + + /* Send the number of fingers reported by touchpad itself. */ + input_mt_report_finger_count(dev, mt_state->count); + + synaptics_report_buttons(psmouse, sgm); + + input_sync(dev); +} + +/* Handle case where mt_state->count = 0 */ +static void synaptics_image_sensor_0f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + synaptics_mt_state_set(mt_state, 0, -1, -1); + priv->mt_state_lost = false; +} + +/* Handle case where mt_state->count = 1 */ +static void synaptics_image_sensor_1f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + struct synaptics_hw_state *agm = &priv->agm; + struct synaptics_mt_state *old = &priv->mt_state; + + /* + * If the last AGM was (0,0,0), and there is only one finger left, + * then we absolutely know that SGM contains slot 0, and all other + * fingers have been removed. + */ + if (priv->agm_pending && agm->z == 0) { + synaptics_mt_state_set(mt_state, 1, 0, -1); + priv->mt_state_lost = false; + return; + } + + switch (old->count) { + case 0: + synaptics_mt_state_set(mt_state, 1, 0, -1); + break; + case 1: + /* + * If mt_state_lost, then the previous transition was 3->1, + * and SGM now contains either slot 0 or 1, but we don't know + * which. So, we just assume that the SGM now contains slot 1. + * + * If pending AGM and either: + * (a) the previous SGM slot contains slot 0, or + * (b) there was no SGM slot + * then, the SGM now contains slot 1 + * + * Case (a) happens with very rapid "drum roll" gestures, where + * slot 0 finger is lifted and a new slot 1 finger touches + * within one reporting interval. + * + * Case (b) happens if initially two or more fingers tap + * briefly, and all but one lift before the end of the first + * reporting interval. + * + * (In both these cases, slot 0 will becomes empty, so SGM + * contains slot 1 with the new finger) + * + * Else, if there was no previous SGM, it now contains slot 0. + * + * Otherwise, SGM still contains the same slot. + */ + if (priv->mt_state_lost || + (priv->agm_pending && old->sgm <= 0)) + synaptics_mt_state_set(mt_state, 1, 1, -1); + else if (old->sgm == -1) + synaptics_mt_state_set(mt_state, 1, 0, -1); + break; + case 2: + /* + * If mt_state_lost, we don't know which finger SGM contains. + * + * So, report 1 finger, but with both slots empty. + * We will use slot 1 on subsequent 1->1 + */ + if (priv->mt_state_lost) { + synaptics_mt_state_set(mt_state, 1, -1, -1); + break; + } + /* + * Since the last AGM was NOT (0,0,0), it was the finger in + * slot 0 that has been removed. + * So, SGM now contains previous AGM's slot, and AGM is now + * empty. + */ + synaptics_mt_state_set(mt_state, 1, old->agm, -1); + break; + case 3: + /* + * Since last AGM was not (0,0,0), we don't know which finger + * is left. + * + * So, report 1 finger, but with both slots empty. + * We will use slot 1 on subsequent 1->1 + */ + synaptics_mt_state_set(mt_state, 1, -1, -1); + priv->mt_state_lost = true; + break; + case 4: + case 5: + /* mt_state was updated by AGM-CONTACT packet */ + break; + } +} + +/* Handle case where mt_state->count = 2 */ +static void synaptics_image_sensor_2f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + struct synaptics_mt_state *old = &priv->mt_state; + + switch (old->count) { + case 0: + synaptics_mt_state_set(mt_state, 2, 0, 1); + break; + case 1: + /* + * If previous SGM contained slot 1 or higher, SGM now contains + * slot 0 (the newly touching finger) and AGM contains SGM's + * previous slot. + * + * Otherwise, SGM still contains slot 0 and AGM now contains + * slot 1. + */ + if (old->sgm >= 1) + synaptics_mt_state_set(mt_state, 2, 0, old->sgm); + else + synaptics_mt_state_set(mt_state, 2, 0, 1); + break; + case 2: + /* + * If mt_state_lost, SGM now contains either finger 1 or 2, but + * we don't know which. + * So, we just assume that the SGM contains slot 0 and AGM 1. + */ + if (priv->mt_state_lost) + synaptics_mt_state_set(mt_state, 2, 0, 1); + /* + * Otherwise, use the same mt_state, since it either hasn't + * changed, or was updated by a recently received AGM-CONTACT + * packet. + */ + break; + case 3: + /* + * 3->2 transitions have two unsolvable problems: + * 1) no indication is given which finger was removed + * 2) no way to tell if agm packet was for finger 3 + * before 3->2, or finger 2 after 3->2. + * + * So, report 2 fingers, but empty all slots. + * We will guess slots [0,1] on subsequent 2->2. + */ + synaptics_mt_state_set(mt_state, 2, -1, -1); + priv->mt_state_lost = true; + break; + case 4: + case 5: + /* mt_state was updated by AGM-CONTACT packet */ + break; + } +} + +/* Handle case where mt_state->count = 3 */ +static void synaptics_image_sensor_3f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + struct synaptics_mt_state *old = &priv->mt_state; + + switch (old->count) { + case 0: + synaptics_mt_state_set(mt_state, 3, 0, 2); + break; + case 1: + /* + * If previous SGM contained slot 2 or higher, SGM now contains + * slot 0 (one of the newly touching fingers) and AGM contains + * SGM's previous slot. + * + * Otherwise, SGM now contains slot 0 and AGM contains slot 2. + */ + if (old->sgm >= 2) + synaptics_mt_state_set(mt_state, 3, 0, old->sgm); + else + synaptics_mt_state_set(mt_state, 3, 0, 2); + break; + case 2: + /* + * If the AGM previously contained slot 3 or higher, then the + * newly touching finger is in the lowest available slot. + * + * If SGM was previously 1 or higher, then the new SGM is + * now slot 0 (with a new finger), otherwise, the new finger + * is now in a hidden slot between 0 and AGM's slot. + * + * In all such cases, the SGM now contains slot 0, and the AGM + * continues to contain the same slot as before. + */ + if (old->agm >= 3) { + synaptics_mt_state_set(mt_state, 3, 0, old->agm); + break; + } + + /* + * After some 3->1 and all 3->2 transitions, we lose track + * of which slot is reported by SGM and AGM. + * + * For 2->3 in this state, report 3 fingers, but empty all + * slots, and we will guess (0,2) on a subsequent 0->3. + * + * To userspace, the resulting transition will look like: + * 2:[0,1] -> 3:[-1,-1] -> 3:[0,2] + */ + if (priv->mt_state_lost) { + synaptics_mt_state_set(mt_state, 3, -1, -1); + break; + } + + /* + * If the (SGM,AGM) really previously contained slots (0, 1), + * then we cannot know what slot was just reported by the AGM, + * because the 2->3 transition can occur either before or after + * the AGM packet. Thus, this most recent AGM could contain + * either the same old slot 1 or the new slot 2. + * Subsequent AGMs will be reporting slot 2. + * + * To userspace, the resulting transition will look like: + * 2:[0,1] -> 3:[0,-1] -> 3:[0,2] + */ + synaptics_mt_state_set(mt_state, 3, 0, -1); + break; + case 3: + /* + * If, for whatever reason, the previous agm was invalid, + * Assume SGM now contains slot 0, AGM now contains slot 2. + */ + if (old->agm <= 2) + synaptics_mt_state_set(mt_state, 3, 0, 2); + /* + * mt_state either hasn't changed, or was updated by a recently + * received AGM-CONTACT packet. + */ + break; + + case 4: + case 5: + /* mt_state was updated by AGM-CONTACT packet */ + break; + } +} + +/* Handle case where mt_state->count = 4, or = 5 */ +static void synaptics_image_sensor_45f(struct synaptics_data *priv, + struct synaptics_mt_state *mt_state) +{ + /* mt_state was updated correctly by AGM-CONTACT packet */ + priv->mt_state_lost = false; +} + +static void synaptics_image_sensor_process(struct psmouse *psmouse, + struct synaptics_hw_state *sgm) +{ + struct synaptics_data *priv = psmouse->private; + struct synaptics_hw_state *agm = &priv->agm; + struct synaptics_mt_state mt_state; + + /* Initialize using current mt_state (as updated by last agm) */ + mt_state = agm->mt_state; + + /* + * Update mt_state using the new finger count and current mt_state. + */ + if (sgm->z == 0) + synaptics_image_sensor_0f(priv, &mt_state); + else if (sgm->w >= 4) + synaptics_image_sensor_1f(priv, &mt_state); + else if (sgm->w == 0) + synaptics_image_sensor_2f(priv, &mt_state); + else if (sgm->w == 1 && mt_state.count <= 3) + synaptics_image_sensor_3f(priv, &mt_state); + else + synaptics_image_sensor_45f(priv, &mt_state); + + /* Send resulting input events to user space */ + synaptics_report_mt_data(psmouse, &mt_state, sgm); + + /* Store updated mt_state */ + priv->mt_state = agm->mt_state = mt_state; + priv->agm_pending = false; } /* @@ -523,11 +1162,15 @@ static void synaptics_process_packet(struct psmouse *psmouse) struct synaptics_hw_state hw; int num_fingers; int finger_width; - int i; if (synaptics_parse_hw_state(psmouse->packet, priv, &hw)) return; + if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) { + synaptics_image_sensor_process(psmouse, &hw); + return; + } + if (hw.scroll) { priv->scroll += hw.scroll; @@ -573,7 +1216,8 @@ static void synaptics_process_packet(struct psmouse *psmouse) } if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) - synaptics_report_semi_mt_data(dev, &hw, &priv->mt, num_fingers); + synaptics_report_semi_mt_data(dev, &hw, &priv->agm, + num_fingers); /* Post events * BTN_TOUCH has to be first as mousedev relies on it when doing @@ -584,7 +1228,7 @@ static void synaptics_process_packet(struct psmouse *psmouse) if (num_fingers > 0) { input_report_abs(dev, ABS_X, hw.x); - input_report_abs(dev, ABS_Y, YMAX_NOMINAL + YMIN_NOMINAL - hw.y); + input_report_abs(dev, ABS_Y, synaptics_invert_y(hw.y)); } input_report_abs(dev, ABS_PRESSURE, hw.z); @@ -592,35 +1236,25 @@ static void synaptics_process_packet(struct psmouse *psmouse) input_report_abs(dev, ABS_TOOL_WIDTH, finger_width); input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1); - input_report_key(dev, BTN_LEFT, hw.left); - input_report_key(dev, BTN_RIGHT, hw.right); - if (SYN_CAP_MULTIFINGER(priv->capabilities)) { input_report_key(dev, BTN_TOOL_DOUBLETAP, num_fingers == 2); input_report_key(dev, BTN_TOOL_TRIPLETAP, num_fingers == 3); } - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) - input_report_key(dev, BTN_MIDDLE, hw.middle); - - if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) { - input_report_key(dev, BTN_FORWARD, hw.up); - input_report_key(dev, BTN_BACK, hw.down); - } - - for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++) - input_report_key(dev, BTN_0 + i, hw.ext_buttons & (1 << i)); + synaptics_report_buttons(psmouse, &hw); input_sync(dev); } -static int synaptics_validate_byte(unsigned char packet[], int idx, unsigned char pkt_type) +static int synaptics_validate_byte(struct psmouse *psmouse, + int idx, unsigned char pkt_type) { static const unsigned char newabs_mask[] = { 0xC8, 0x00, 0x00, 0xC8, 0x00 }; static const unsigned char newabs_rel_mask[] = { 0xC0, 0x00, 0x00, 0xC0, 0x00 }; static const unsigned char newabs_rslt[] = { 0x80, 0x00, 0x00, 0xC0, 0x00 }; static const unsigned char oldabs_mask[] = { 0xC0, 0x60, 0x00, 0xC0, 0x60 }; static const unsigned char oldabs_rslt[] = { 0xC0, 0x00, 0x00, 0x80, 0x00 }; + const char *packet = psmouse->packet; if (idx < 0 || idx > 4) return 0; @@ -638,7 +1272,7 @@ static int synaptics_validate_byte(unsigned char packet[], int idx, unsigned cha return (packet[idx] & oldabs_mask[idx]) == oldabs_rslt[idx]; default: - printk(KERN_ERR "synaptics: unknown packet type %d\n", pkt_type); + psmouse_err(psmouse, "unknown packet type %d\n", pkt_type); return 0; } } @@ -648,8 +1282,8 @@ static unsigned char synaptics_detect_pkt_type(struct psmouse *psmouse) int i; for (i = 0; i < 5; i++) - if (!synaptics_validate_byte(psmouse->packet, i, SYN_NEWABS_STRICT)) { - printk(KERN_INFO "synaptics: using relaxed packet validation\n"); + if (!synaptics_validate_byte(psmouse, i, SYN_NEWABS_STRICT)) { + psmouse_info(psmouse, "using relaxed packet validation\n"); return SYN_NEWABS_RELAXED; } @@ -674,52 +1308,87 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse) return PSMOUSE_FULL_PACKET; } - return synaptics_validate_byte(psmouse->packet, psmouse->pktcnt - 1, priv->pkt_type) ? + return synaptics_validate_byte(psmouse, psmouse->pktcnt - 1, priv->pkt_type) ? PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA; } /***************************************************************************** * Driver initialization/cleanup functions ****************************************************************************/ -static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) +static void set_abs_position_params(struct input_dev *dev, + struct synaptics_data *priv, int x_code, + int y_code) +{ + int x_min = priv->x_min ?: XMIN_NOMINAL; + int x_max = priv->x_max ?: XMAX_NOMINAL; + int y_min = priv->y_min ?: YMIN_NOMINAL; + int y_max = priv->y_max ?: YMAX_NOMINAL; + int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ? + SYN_REDUCED_FILTER_FUZZ : 0; + + input_set_abs_params(dev, x_code, x_min, x_max, fuzz, 0); + input_set_abs_params(dev, y_code, y_min, y_max, fuzz, 0); + input_abs_set_res(dev, x_code, priv->x_res); + input_abs_set_res(dev, y_code, priv->y_res); +} + +static void set_input_params(struct psmouse *psmouse, + struct synaptics_data *priv) { + struct input_dev *dev = psmouse->dev; int i; + /* Things that apply to both modes */ __set_bit(INPUT_PROP_POINTER, dev->propbit); + __set_bit(EV_KEY, dev->evbit); + __set_bit(BTN_LEFT, dev->keybit); + __set_bit(BTN_RIGHT, dev->keybit); + if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) + __set_bit(BTN_MIDDLE, dev->keybit); + + if (!priv->absolute_mode) { + /* Relative mode */ + __set_bit(EV_REL, dev->evbit); + __set_bit(REL_X, dev->relbit); + __set_bit(REL_Y, dev->relbit); + return; + } + + /* Absolute mode */ __set_bit(EV_ABS, dev->evbit); - input_set_abs_params(dev, ABS_X, - XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0); - input_set_abs_params(dev, ABS_Y, - YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0); + set_abs_position_params(dev, priv, ABS_X, ABS_Y); input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); - if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) { + if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) { + set_abs_position_params(dev, priv, ABS_MT_POSITION_X, + ABS_MT_POSITION_Y); + /* Image sensors can report per-contact pressure */ + input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0); + input_mt_init_slots(dev, 2, INPUT_MT_POINTER); + + /* Image sensors can signal 4 and 5 finger clicks */ + __set_bit(BTN_TOOL_QUADTAP, dev->keybit); + __set_bit(BTN_TOOL_QUINTTAP, dev->keybit); + } else if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) { + /* Non-image sensors with AGM use semi-mt */ __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); - input_mt_init_slots(dev, 2); - input_set_abs_params(dev, ABS_MT_POSITION_X, XMIN_NOMINAL, - priv->x_max ?: XMAX_NOMINAL, 0, 0); - input_set_abs_params(dev, ABS_MT_POSITION_Y, YMIN_NOMINAL, - priv->y_max ?: YMAX_NOMINAL, 0, 0); + input_mt_init_slots(dev, 2, 0); + set_abs_position_params(dev, priv, ABS_MT_POSITION_X, + ABS_MT_POSITION_Y); } if (SYN_CAP_PALMDETECT(priv->capabilities)) input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0); - __set_bit(EV_KEY, dev->evbit); __set_bit(BTN_TOUCH, dev->keybit); __set_bit(BTN_TOOL_FINGER, dev->keybit); - __set_bit(BTN_LEFT, dev->keybit); - __set_bit(BTN_RIGHT, dev->keybit); if (SYN_CAP_MULTIFINGER(priv->capabilities)) { __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); } - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) - __set_bit(BTN_MIDDLE, dev->keybit); - if (SYN_CAP_FOUR_BUTTON(priv->capabilities) || SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) { __set_bit(BTN_FORWARD, dev->keybit); @@ -733,21 +1402,68 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) __clear_bit(REL_X, dev->relbit); __clear_bit(REL_Y, dev->relbit); - input_abs_set_res(dev, ABS_X, priv->x_res); - input_abs_set_res(dev, ABS_Y, priv->y_res); - if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); + if (matches_pnp_id(psmouse, topbuttonpad_pnp_ids)) + __set_bit(INPUT_PROP_TOPBUTTONPAD, dev->propbit); /* Clickpads report only left button */ __clear_bit(BTN_RIGHT, dev->keybit); __clear_bit(BTN_MIDDLE, dev->keybit); } } +static ssize_t synaptics_show_disable_gesture(struct psmouse *psmouse, + void *data, char *buf) +{ + struct synaptics_data *priv = psmouse->private; + + return sprintf(buf, "%c\n", priv->disable_gesture ? '1' : '0'); +} + +static ssize_t synaptics_set_disable_gesture(struct psmouse *psmouse, + void *data, const char *buf, + size_t len) +{ + struct synaptics_data *priv = psmouse->private; + unsigned int value; + int err; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) + return -EINVAL; + + if (value == priv->disable_gesture) + return len; + + priv->disable_gesture = value; + if (value) + priv->mode |= SYN_BIT_DISABLE_GESTURE; + else + priv->mode &= ~SYN_BIT_DISABLE_GESTURE; + + if (synaptics_mode_cmd(psmouse, priv->mode)) + return -EIO; + + return len; +} + +PSMOUSE_DEFINE_ATTR(disable_gesture, S_IWUSR | S_IRUGO, NULL, + synaptics_show_disable_gesture, + synaptics_set_disable_gesture); + static void synaptics_disconnect(struct psmouse *psmouse) { + struct synaptics_data *priv = psmouse->private; + + if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(priv->identity)) + device_remove_file(&psmouse->ps2dev.serio->dev, + &psmouse_attr_disable_gesture.dattr); + synaptics_reset(psmouse); - kfree(psmouse->private); + kfree(priv); psmouse->private = NULL; } @@ -755,11 +1471,23 @@ static int synaptics_reconnect(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; struct synaptics_data old_priv = *priv; + unsigned char param[2]; int retry = 0; int error; do { psmouse_reset(psmouse); + if (retry) { + /* + * On some boxes, right after resuming, the touchpad + * needs some time to finish initializing (I assume + * it needs time to calibrate) and start responding + * to Synaptics-specific queries, so let's wait a + * bit. + */ + ssleep(1); + } + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETID); error = synaptics_detect(psmouse, 0); } while (error && ++retry < 3); @@ -767,21 +1495,15 @@ static int synaptics_reconnect(struct psmouse *psmouse) return -1; if (retry > 1) - printk(KERN_DEBUG "Synaptics reconnected after %d tries\n", - retry); + psmouse_dbg(psmouse, "reconnected after %d tries\n", retry); if (synaptics_query_hardware(psmouse)) { - printk(KERN_ERR "Unable to query Synaptics hardware.\n"); - return -1; - } - - if (synaptics_set_absolute_mode(psmouse)) { - printk(KERN_ERR "Unable to initialize Synaptics hardware.\n"); + psmouse_err(psmouse, "Unable to query device.\n"); return -1; } - if (synaptics_set_advanced_gesture_mode(psmouse)) { - printk(KERN_ERR "Advanced gesture mode reconnect failed.\n"); + if (synaptics_set_mode(psmouse)) { + psmouse_err(psmouse, "Unable to initialize device.\n"); return -1; } @@ -789,12 +1511,12 @@ static int synaptics_reconnect(struct psmouse *psmouse) old_priv.model_id != priv->model_id || old_priv.capabilities != priv->capabilities || old_priv.ext_cap != priv->ext_cap) { - printk(KERN_ERR "Synaptics hardware appears to be different: " - "id(%ld-%ld), model(%ld-%ld), caps(%lx-%lx), ext(%lx-%lx).\n", - old_priv.identity, priv->identity, - old_priv.model_id, priv->model_id, - old_priv.capabilities, priv->capabilities, - old_priv.ext_cap, priv->ext_cap); + psmouse_err(psmouse, + "hardware appears to be different: id(%ld-%ld), model(%ld-%ld), caps(%lx-%lx), ext(%lx-%lx).\n", + old_priv.identity, priv->identity, + old_priv.model_id, priv->model_id, + old_priv.capabilities, priv->capabilities, + old_priv.ext_cap, priv->ext_cap); return -1; } @@ -803,7 +1525,7 @@ static int synaptics_reconnect(struct psmouse *psmouse) static bool impaired_toshiba_kbc; -static const struct dmi_system_id __initconst toshiba_dmi_table[] = { +static const struct dmi_system_id toshiba_dmi_table[] __initconst = { #if defined(CONFIG_DMI) && defined(CONFIG_X86) { /* Toshiba Satellite */ @@ -836,13 +1558,13 @@ static const struct dmi_system_id __initconst toshiba_dmi_table[] = { }, }, - { } #endif + { } }; static bool broken_olpc_ec; -static const struct dmi_system_id __initconst olpc_dmi_table[] = { +static const struct dmi_system_id olpc_dmi_table[] __initconst = { #if defined(CONFIG_DMI) && defined(CONFIG_OLPC) { /* OLPC XO-1 or XO-1.5 */ @@ -851,8 +1573,8 @@ static const struct dmi_system_id __initconst olpc_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "XO"), }, }, - { } #endif + { } }; void __init synaptics_module_init(void) @@ -861,21 +1583,20 @@ void __init synaptics_module_init(void) broken_olpc_ec = dmi_check_system(olpc_dmi_table); } -int synaptics_init(struct psmouse *psmouse) +static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) { struct synaptics_data *priv; + int err = -1; /* - * The OLPC XO has issues with Synaptics' absolute mode; similarly to - * the HGPK, it quickly degrades and the hardware becomes jumpy and - * overly sensitive. Not only that, but the constant packet spew - * (even at a lowered 40pps rate) overloads the EC such that key - * presses on the keyboard are missed. Given all of that, don't - * even attempt to use Synaptics mode. Relative mode seems to work - * just fine. + * The OLPC XO has issues with Synaptics' absolute mode; the constant + * packet spew overloads the EC such that key presses on the keyboard + * are missed. Given that, don't even attempt to use Absolute mode. + * Relative mode seems to work just fine. */ - if (broken_olpc_ec) { - printk(KERN_INFO "synaptics: OLPC XO detected, not enabling Synaptics protocol.\n"); + if (absolute_mode && broken_olpc_ec) { + psmouse_info(psmouse, + "OLPC XO detected, not enabling Synaptics protocol.\n"); return -ENODEV; } @@ -886,28 +1607,30 @@ int synaptics_init(struct psmouse *psmouse) psmouse_reset(psmouse); if (synaptics_query_hardware(psmouse)) { - printk(KERN_ERR "Unable to query Synaptics hardware.\n"); + psmouse_err(psmouse, "Unable to query device.\n"); goto init_fail; } - if (synaptics_set_absolute_mode(psmouse)) { - printk(KERN_ERR "Unable to initialize Synaptics hardware.\n"); - goto init_fail; - } + priv->absolute_mode = absolute_mode; + if (SYN_ID_DISGEST_SUPPORTED(priv->identity)) + priv->disable_gesture = true; - if (synaptics_set_advanced_gesture_mode(psmouse)) { - printk(KERN_ERR "Advanced gesture mode init failed.\n"); + if (synaptics_set_mode(psmouse)) { + psmouse_err(psmouse, "Unable to initialize device.\n"); goto init_fail; } priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS; - printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n", - SYN_ID_MODEL(priv->identity), - SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), - priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c); + psmouse_info(psmouse, + "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx, board id: %lu, fw id: %lu\n", + SYN_ID_MODEL(priv->identity), + SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), + priv->model_id, + priv->capabilities, priv->ext_cap, priv->ext_cap_0c, + priv->board_id, priv->firmware_id); - set_input_params(psmouse->dev, priv); + set_input_params(psmouse, priv); /* * Encode touchpad model so that it can be used to set @@ -919,12 +1642,19 @@ int synaptics_init(struct psmouse *psmouse) psmouse->model = ((priv->model_id & 0x00ff0000) >> 8) | (priv->model_id & 0x000000ff); - psmouse->protocol_handler = synaptics_process_byte; + if (absolute_mode) { + psmouse->protocol_handler = synaptics_process_byte; + psmouse->pktsize = 6; + } else { + /* Relative mode follows standard PS/2 mouse protocol */ + psmouse->protocol_handler = psmouse_process_byte; + psmouse->pktsize = 3; + } + psmouse->set_rate = synaptics_set_rate; psmouse->disconnect = synaptics_disconnect; psmouse->reconnect = synaptics_reconnect; psmouse->cleanup = synaptics_reset; - psmouse->pktsize = 6; /* Synaptics can usually stay in sync without extra help */ psmouse->resync_time = 0; @@ -937,16 +1667,38 @@ int synaptics_init(struct psmouse *psmouse) * the same rate as a standard PS/2 mouse). */ if (psmouse->rate >= 80 && impaired_toshiba_kbc) { - printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n", - dmi_get_system_info(DMI_PRODUCT_NAME)); + psmouse_info(psmouse, + "Toshiba %s detected, limiting rate to 40pps.\n", + dmi_get_system_info(DMI_PRODUCT_NAME)); psmouse->rate = 40; } + if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(priv->identity)) { + err = device_create_file(&psmouse->ps2dev.serio->dev, + &psmouse_attr_disable_gesture.dattr); + if (err) { + psmouse_err(psmouse, + "Failed to create disable_gesture attribute (%d)", + err); + goto init_fail; + } + } + return 0; init_fail: kfree(priv); - return -1; + return err; +} + +int synaptics_init(struct psmouse *psmouse) +{ + return __synaptics_init(psmouse, true); +} + +int synaptics_init_relative(struct psmouse *psmouse) +{ + return __synaptics_init(psmouse, false); } bool synaptics_supported(void) @@ -971,4 +1723,3 @@ bool synaptics_supported(void) } #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */ - diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 7453938bf5e..e594af0b264 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -18,8 +18,10 @@ #define SYN_QUE_SERIAL_NUMBER_SUFFIX 0x07 #define SYN_QUE_RESOLUTION 0x08 #define SYN_QUE_EXT_CAPAB 0x09 +#define SYN_QUE_FIRMWARE_ID 0x0a #define SYN_QUE_EXT_CAPAB_0C 0x0c -#define SYN_QUE_EXT_DIMENSIONS 0x0d +#define SYN_QUE_EXT_MAX_COORDS 0x0d +#define SYN_QUE_EXT_MIN_COORDS 0x0f /* synatics modes */ #define SYN_BIT_ABSOLUTE_MODE (1 << 7) @@ -66,18 +68,24 @@ * 1 0x60 multifinger mode identifies firmware finger counting * (not reporting!) algorithm. * Not particularly meaningful - * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered - * 2 0x01 clickpad bit 1 2-button ClickPad - * 2 0x02 deluxe LED controls touchpad support LED commands + * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered + * 2 0x01 clickpad bit 1 2-button ClickPad + * 2 0x02 deluxe LED controls touchpad support LED commands * ala multimedia control bar * 2 0x04 reduced filtering firmware does less filtering on * position data, driver should watch * for noise. + * 2 0x08 image sensor image sensor tracks 5 fingers, but only + * reports 2. + * 2 0x20 report min query 0x0f gives min coord reported */ #define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */ #define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */ #define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000) +#define SYN_CAP_MIN_DIMENSIONS(ex0c) ((ex0c) & 0x002000) #define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000) +#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400) +#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800) /* synaptics modes query bits */ #define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7)) @@ -93,6 +101,7 @@ #define SYN_ID_MINOR(i) (((i) >> 16) & 0xff) #define SYN_ID_FULL(i) ((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i)) #define SYN_ID_IS_SYNAPTICS(i) ((((i) >> 8) & 0xff) == 0x47) +#define SYN_ID_DISGEST_SUPPORTED(i) (SYN_ID_MAJOR(i) >= 4) /* synaptics special commands */ #define SYN_PS_SET_MODE2 0x14 @@ -104,10 +113,22 @@ #define SYN_NEWABS_RELAXED 2 #define SYN_OLDABS 3 +/* amount to fuzz position data when touchpad reports reduced filtering */ +#define SYN_REDUCED_FILTER_FUZZ 8 + /* - * A structure to describe the state of the touchpad hardware (buttons and pad) + * A structure to describe which internal touchpad finger slots are being + * reported in raw packets. */ +struct synaptics_mt_state { + int count; /* num fingers being tracked */ + int sgm; /* which slot is reported by sgm pkt */ + int agm; /* which slot is reported by agm pkt*/ +}; +/* + * A structure to describe the state of the touchpad hardware (buttons and pad) + */ struct synaptics_hw_state { int x; int y; @@ -120,30 +141,48 @@ struct synaptics_hw_state { unsigned int down:1; unsigned char ext_buttons; signed char scroll; + + /* As reported in last AGM-CONTACT packets */ + struct synaptics_mt_state mt_state; }; struct synaptics_data { /* Data read from the touchpad */ unsigned long int model_id; /* Model-ID */ + unsigned long int firmware_id; /* Firmware-ID */ + unsigned long int board_id; /* Board-ID */ unsigned long int capabilities; /* Capabilities */ unsigned long int ext_cap; /* Extended Capabilities */ unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */ unsigned long int identity; /* Identification */ unsigned int x_res, y_res; /* X/Y resolution in units/mm */ - unsigned int x_max, y_max; /* Max dimensions (from FW) */ + unsigned int x_max, y_max; /* Max coordinates (from FW) */ + unsigned int x_min, y_min; /* Min coordinates (from FW) */ unsigned char pkt_type; /* packet type - old, new, etc */ unsigned char mode; /* current mode byte */ int scroll; + bool absolute_mode; /* run in Absolute mode */ + bool disable_gesture; /* disable gestures */ + struct serio *pt_port; /* Pass-through serio port */ - struct synaptics_hw_state mt; /* current gesture packet */ + struct synaptics_mt_state mt_state; /* Current mt finger state */ + bool mt_state_lost; /* mt_state may be incorrect */ + + /* + * Last received Advanced Gesture Mode (AGM) packet. An AGM packet + * contains position data for a second contact, at half resolution. + */ + struct synaptics_hw_state agm; + bool agm_pending; /* new AGM packet received */ }; void synaptics_module_init(void); int synaptics_detect(struct psmouse *psmouse, bool set_properties); int synaptics_init(struct psmouse *psmouse); +int synaptics_init_relative(struct psmouse *psmouse); void synaptics_reset(struct psmouse *psmouse); bool synaptics_supported(void); diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index 0ae62f0bcb3..ad822608f6e 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/workqueue.h> #include <linux/slab.h> +#include <linux/pm.h> #define DRIVER_NAME "synaptics_i2c" /* maximum product id is 15 characters */ @@ -184,17 +185,17 @@ #define NO_DATA_SLEEP_MSECS (MSEC_PER_SEC / 4) /* Control touchpad's No Deceleration option */ -static int no_decel = 1; +static bool no_decel = 1; module_param(no_decel, bool, 0644); MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)"); /* Control touchpad's Reduced Reporting option */ -static int reduce_report; +static bool reduce_report; module_param(reduce_report, bool, 0644); MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)"); /* Control touchpad's No Filter option */ -static int no_filter; +static bool no_filter; module_param(no_filter, bool, 0644); MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)"); @@ -375,12 +376,7 @@ static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch, spin_lock_irqsave(&touch->lock, flags); - /* - * If work is already scheduled then subsequent schedules will not - * change the scheduled time that's why we have to cancel it first. - */ - __cancel_delayed_work(&touch->dwork); - schedule_delayed_work(&touch->dwork, delay); + mod_delayed_work(system_wq, &touch->dwork, delay); spin_unlock_irqrestore(&touch->lock, flags); } @@ -461,7 +457,7 @@ static void synaptics_i2c_work_handler(struct work_struct *work) * While interrupt driven, there is no real need to poll the device. * But touchpads are very sensitive, so there could be errors * related to physical environment and the attention line isn't - * neccesarily asserted. In such case we can lose the touchpad. + * necessarily asserted. In such case we can lose the touchpad. * We poll the device once in THREAD_IRQ_SLEEP_SECS and * if error is detected, we try to reset and reconfigure the touchpad. */ @@ -539,7 +535,7 @@ static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *clien return touch; } -static int __devinit synaptics_i2c_probe(struct i2c_client *client, +static int synaptics_i2c_probe(struct i2c_client *client, const struct i2c_device_id *dev_id) { int ret; @@ -569,7 +565,7 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client, "Requesting IRQ: %d\n", touch->client->irq); ret = request_irq(touch->client->irq, synaptics_i2c_irq, - IRQF_DISABLED|IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_EDGE_FALLING, DRIVER_NAME, touch); if (ret) { dev_warn(&touch->client->dev, @@ -605,7 +601,7 @@ err_mem_free: return ret; } -static int __devexit synaptics_i2c_remove(struct i2c_client *client) +static int synaptics_i2c_remove(struct i2c_client *client) { struct synaptics_i2c *touch = i2c_get_clientdata(client); @@ -618,9 +614,10 @@ static int __devexit synaptics_i2c_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM -static int synaptics_i2c_suspend(struct i2c_client *client, pm_message_t mesg) +#ifdef CONFIG_PM_SLEEP +static int synaptics_i2c_suspend(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); struct synaptics_i2c *touch = i2c_get_clientdata(client); cancel_delayed_work_sync(&touch->dwork); @@ -631,9 +628,10 @@ static int synaptics_i2c_suspend(struct i2c_client *client, pm_message_t mesg) return 0; } -static int synaptics_i2c_resume(struct i2c_client *client) +static int synaptics_i2c_resume(struct device *dev) { int ret; + struct i2c_client *client = to_i2c_client(dev); struct synaptics_i2c *touch = i2c_get_clientdata(client); ret = synaptics_i2c_reset_config(client); @@ -645,11 +643,11 @@ static int synaptics_i2c_resume(struct i2c_client *client) return 0; } -#else -#define synaptics_i2c_suspend NULL -#define synaptics_i2c_resume NULL #endif +static SIMPLE_DEV_PM_OPS(synaptics_i2c_pm, synaptics_i2c_suspend, + synaptics_i2c_resume); + static const struct i2c_device_id synaptics_i2c_id_table[] = { { "synaptics_i2c", 0 }, { }, @@ -660,28 +658,16 @@ static struct i2c_driver synaptics_i2c_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .pm = &synaptics_i2c_pm, }, .probe = synaptics_i2c_probe, - .remove = __devexit_p(synaptics_i2c_remove), + .remove = synaptics_i2c_remove, - .suspend = synaptics_i2c_suspend, - .resume = synaptics_i2c_resume, .id_table = synaptics_i2c_id_table, }; -static int __init synaptics_i2c_init(void) -{ - return i2c_add_driver(&synaptics_i2c_driver); -} - -static void __exit synaptics_i2c_exit(void) -{ - i2c_del_driver(&synaptics_i2c_driver); -} - -module_init(synaptics_i2c_init); -module_exit(synaptics_i2c_exit); +module_i2c_driver(synaptics_i2c_driver); MODULE_DESCRIPTION("Synaptics I2C touchpad driver"); MODULE_AUTHOR("Mike Rapoport, Igor Grinberg, Compulab"); diff --git a/drivers/input/mouse/synaptics_usb.c b/drivers/input/mouse/synaptics_usb.c new file mode 100644 index 00000000000..e122bda16aa --- /dev/null +++ b/drivers/input/mouse/synaptics_usb.c @@ -0,0 +1,556 @@ +/* + * USB Synaptics device driver + * + * Copyright (c) 2002 Rob Miller (rob@inpharmatica . co . uk) + * Copyright (c) 2003 Ron Lee (ron@debian.org) + * cPad driver for kernel 2.4 + * + * Copyright (c) 2004 Jan Steinhoff (cpad@jan-steinhoff . de) + * Copyright (c) 2004 Ron Lee (ron@debian.org) + * rewritten for kernel 2.6 + * + * cPad display character device part is not included. It can be found at + * http://jan-steinhoff.de/linux/synaptics-usb.html + * + * Bases on: usb_skeleton.c v2.2 by Greg Kroah-Hartman + * drivers/hid/usbhid/usbmouse.c by Vojtech Pavlik + * drivers/input/mouse/synaptics.c by Peter Osterlund + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * Trademarks are the property of their respective owners. + */ + +/* + * There are three different types of Synaptics USB devices: Touchpads, + * touchsticks (or trackpoints), and touchscreens. Touchpads are well supported + * by this driver, touchstick support has not been tested much yet, and + * touchscreens have not been tested at all. + * + * Up to three alternate settings are possible: + * setting 0: one int endpoint for relative movement (used by usbhid.ko) + * setting 1: one int endpoint for absolute finger position + * setting 2 (cPad only): one int endpoint for absolute finger position and + * two bulk endpoints for the display (in/out) + * This driver uses setting 1. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/usb.h> +#include <linux/input.h> +#include <linux/usb/input.h> + +#define USB_VENDOR_ID_SYNAPTICS 0x06cb +#define USB_DEVICE_ID_SYNAPTICS_TP 0x0001 /* Synaptics USB TouchPad */ +#define USB_DEVICE_ID_SYNAPTICS_INT_TP 0x0002 /* Integrated USB TouchPad */ +#define USB_DEVICE_ID_SYNAPTICS_CPAD 0x0003 /* Synaptics cPad */ +#define USB_DEVICE_ID_SYNAPTICS_TS 0x0006 /* Synaptics TouchScreen */ +#define USB_DEVICE_ID_SYNAPTICS_STICK 0x0007 /* Synaptics USB Styk */ +#define USB_DEVICE_ID_SYNAPTICS_WP 0x0008 /* Synaptics USB WheelPad */ +#define USB_DEVICE_ID_SYNAPTICS_COMP_TP 0x0009 /* Composite USB TouchPad */ +#define USB_DEVICE_ID_SYNAPTICS_WTP 0x0010 /* Wireless TouchPad */ +#define USB_DEVICE_ID_SYNAPTICS_DPAD 0x0013 /* DisplayPad */ + +#define SYNUSB_TOUCHPAD (1 << 0) +#define SYNUSB_STICK (1 << 1) +#define SYNUSB_TOUCHSCREEN (1 << 2) +#define SYNUSB_AUXDISPLAY (1 << 3) /* For cPad */ +#define SYNUSB_COMBO (1 << 4) /* Composite device (TP + stick) */ +#define SYNUSB_IO_ALWAYS (1 << 5) + +#define USB_DEVICE_SYNAPTICS(prod, kind) \ + USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, \ + USB_DEVICE_ID_SYNAPTICS_##prod), \ + .driver_info = (kind), + +#define SYNUSB_RECV_SIZE 8 + +#define XMIN_NOMINAL 1472 +#define XMAX_NOMINAL 5472 +#define YMIN_NOMINAL 1408 +#define YMAX_NOMINAL 4448 + +struct synusb { + struct usb_device *udev; + struct usb_interface *intf; + struct urb *urb; + unsigned char *data; + + /* input device related data structures */ + struct input_dev *input; + char name[128]; + char phys[64]; + + /* characteristics of the device */ + unsigned long flags; +}; + +static void synusb_report_buttons(struct synusb *synusb) +{ + struct input_dev *input_dev = synusb->input; + + input_report_key(input_dev, BTN_LEFT, synusb->data[1] & 0x04); + input_report_key(input_dev, BTN_RIGHT, synusb->data[1] & 0x01); + input_report_key(input_dev, BTN_MIDDLE, synusb->data[1] & 0x02); +} + +static void synusb_report_stick(struct synusb *synusb) +{ + struct input_dev *input_dev = synusb->input; + int x, y; + unsigned int pressure; + + pressure = synusb->data[6]; + x = (s16)(be16_to_cpup((__be16 *)&synusb->data[2]) << 3) >> 7; + y = (s16)(be16_to_cpup((__be16 *)&synusb->data[4]) << 3) >> 7; + + if (pressure > 0) { + input_report_rel(input_dev, REL_X, x); + input_report_rel(input_dev, REL_Y, -y); + } + + input_report_abs(input_dev, ABS_PRESSURE, pressure); + + synusb_report_buttons(synusb); + + input_sync(input_dev); +} + +static void synusb_report_touchpad(struct synusb *synusb) +{ + struct input_dev *input_dev = synusb->input; + unsigned int num_fingers, tool_width; + unsigned int x, y; + unsigned int pressure, w; + + pressure = synusb->data[6]; + x = be16_to_cpup((__be16 *)&synusb->data[2]); + y = be16_to_cpup((__be16 *)&synusb->data[4]); + w = synusb->data[0] & 0x0f; + + if (pressure > 0) { + num_fingers = 1; + tool_width = 5; + switch (w) { + case 0 ... 1: + num_fingers = 2 + w; + break; + + case 2: /* pen, pretend its a finger */ + break; + + case 4 ... 15: + tool_width = w; + break; + } + } else { + num_fingers = 0; + tool_width = 0; + } + + /* + * Post events + * BTN_TOUCH has to be first as mousedev relies on it when doing + * absolute -> relative conversion + */ + + if (pressure > 30) + input_report_key(input_dev, BTN_TOUCH, 1); + if (pressure < 25) + input_report_key(input_dev, BTN_TOUCH, 0); + + if (num_fingers > 0) { + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, + YMAX_NOMINAL + YMIN_NOMINAL - y); + } + + input_report_abs(input_dev, ABS_PRESSURE, pressure); + input_report_abs(input_dev, ABS_TOOL_WIDTH, tool_width); + + input_report_key(input_dev, BTN_TOOL_FINGER, num_fingers == 1); + input_report_key(input_dev, BTN_TOOL_DOUBLETAP, num_fingers == 2); + input_report_key(input_dev, BTN_TOOL_TRIPLETAP, num_fingers == 3); + + synusb_report_buttons(synusb); + if (synusb->flags & SYNUSB_AUXDISPLAY) + input_report_key(input_dev, BTN_MIDDLE, synusb->data[1] & 0x08); + + input_sync(input_dev); +} + +static void synusb_irq(struct urb *urb) +{ + struct synusb *synusb = urb->context; + int error; + + /* Check our status in case we need to bail out early. */ + switch (urb->status) { + case 0: + usb_mark_last_busy(synusb->udev); + break; + + /* Device went away so don't keep trying to read from it. */ + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + return; + + default: + goto resubmit; + break; + } + + if (synusb->flags & SYNUSB_STICK) + synusb_report_stick(synusb); + else + synusb_report_touchpad(synusb); + +resubmit: + error = usb_submit_urb(urb, GFP_ATOMIC); + if (error && error != -EPERM) + dev_err(&synusb->intf->dev, + "%s - usb_submit_urb failed with result: %d", + __func__, error); +} + +static struct usb_endpoint_descriptor * +synusb_get_in_endpoint(struct usb_host_interface *iface) +{ + + struct usb_endpoint_descriptor *endpoint; + int i; + + for (i = 0; i < iface->desc.bNumEndpoints; ++i) { + endpoint = &iface->endpoint[i].desc; + + if (usb_endpoint_is_int_in(endpoint)) { + /* we found our interrupt in endpoint */ + return endpoint; + } + } + + return NULL; +} + +static int synusb_open(struct input_dev *dev) +{ + struct synusb *synusb = input_get_drvdata(dev); + int retval; + + retval = usb_autopm_get_interface(synusb->intf); + if (retval) { + dev_err(&synusb->intf->dev, + "%s - usb_autopm_get_interface failed, error: %d\n", + __func__, retval); + return retval; + } + + retval = usb_submit_urb(synusb->urb, GFP_KERNEL); + if (retval) { + dev_err(&synusb->intf->dev, + "%s - usb_submit_urb failed, error: %d\n", + __func__, retval); + retval = -EIO; + goto out; + } + + synusb->intf->needs_remote_wakeup = 1; + +out: + usb_autopm_put_interface(synusb->intf); + return retval; +} + +static void synusb_close(struct input_dev *dev) +{ + struct synusb *synusb = input_get_drvdata(dev); + int autopm_error; + + autopm_error = usb_autopm_get_interface(synusb->intf); + + usb_kill_urb(synusb->urb); + synusb->intf->needs_remote_wakeup = 0; + + if (!autopm_error) + usb_autopm_put_interface(synusb->intf); +} + +static int synusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *ep; + struct synusb *synusb; + struct input_dev *input_dev; + unsigned int intf_num = intf->cur_altsetting->desc.bInterfaceNumber; + unsigned int altsetting = min(intf->num_altsetting, 1U); + int error; + + error = usb_set_interface(udev, intf_num, altsetting); + if (error) { + dev_err(&udev->dev, + "Can not set alternate setting to %i, error: %i", + altsetting, error); + return error; + } + + ep = synusb_get_in_endpoint(intf->cur_altsetting); + if (!ep) + return -ENODEV; + + synusb = kzalloc(sizeof(*synusb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!synusb || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + synusb->udev = udev; + synusb->intf = intf; + synusb->input = input_dev; + + synusb->flags = id->driver_info; + if (synusb->flags & SYNUSB_COMBO) { + /* + * This is a combo device, we need to set proper + * capability, depending on the interface. + */ + synusb->flags |= intf_num == 1 ? + SYNUSB_STICK : SYNUSB_TOUCHPAD; + } + + synusb->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!synusb->urb) { + error = -ENOMEM; + goto err_free_mem; + } + + synusb->data = usb_alloc_coherent(udev, SYNUSB_RECV_SIZE, GFP_KERNEL, + &synusb->urb->transfer_dma); + if (!synusb->data) { + error = -ENOMEM; + goto err_free_urb; + } + + usb_fill_int_urb(synusb->urb, udev, + usb_rcvintpipe(udev, ep->bEndpointAddress), + synusb->data, SYNUSB_RECV_SIZE, + synusb_irq, synusb, + ep->bInterval); + synusb->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + if (udev->manufacturer) + strlcpy(synusb->name, udev->manufacturer, + sizeof(synusb->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(synusb->name, " ", sizeof(synusb->name)); + strlcat(synusb->name, udev->product, sizeof(synusb->name)); + } + + if (!strlen(synusb->name)) + snprintf(synusb->name, sizeof(synusb->name), + "USB Synaptics Device %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + if (synusb->flags & SYNUSB_STICK) + strlcat(synusb->name, " (Stick)", sizeof(synusb->name)); + + usb_make_path(udev, synusb->phys, sizeof(synusb->phys)); + strlcat(synusb->phys, "/input0", sizeof(synusb->phys)); + + input_dev->name = synusb->name; + input_dev->phys = synusb->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &synusb->intf->dev; + + if (!(synusb->flags & SYNUSB_IO_ALWAYS)) { + input_dev->open = synusb_open; + input_dev->close = synusb_close; + } + + input_set_drvdata(input_dev, synusb); + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + + if (synusb->flags & SYNUSB_STICK) { + __set_bit(EV_REL, input_dev->evbit); + __set_bit(REL_X, input_dev->relbit); + __set_bit(REL_Y, input_dev->relbit); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 127, 0, 0); + } else { + input_set_abs_params(input_dev, ABS_X, + XMIN_NOMINAL, XMAX_NOMINAL, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + YMIN_NOMINAL, YMAX_NOMINAL, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_TOOL_WIDTH, 0, 15, 0, 0); + __set_bit(BTN_TOUCH, input_dev->keybit); + __set_bit(BTN_TOOL_FINGER, input_dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + } + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(BTN_MIDDLE, input_dev->keybit); + + usb_set_intfdata(intf, synusb); + + if (synusb->flags & SYNUSB_IO_ALWAYS) { + error = synusb_open(input_dev); + if (error) + goto err_free_dma; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&udev->dev, + "Failed to register input device, error %d\n", + error); + goto err_stop_io; + } + + return 0; + +err_stop_io: + if (synusb->flags & SYNUSB_IO_ALWAYS) + synusb_close(synusb->input); +err_free_dma: + usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data, + synusb->urb->transfer_dma); +err_free_urb: + usb_free_urb(synusb->urb); +err_free_mem: + input_free_device(input_dev); + kfree(synusb); + usb_set_intfdata(intf, NULL); + + return error; +} + +static void synusb_disconnect(struct usb_interface *intf) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct usb_device *udev = interface_to_usbdev(intf); + + if (synusb->flags & SYNUSB_IO_ALWAYS) + synusb_close(synusb->input); + + input_unregister_device(synusb->input); + + usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data, + synusb->urb->transfer_dma); + usb_free_urb(synusb->urb); + kfree(synusb); + + usb_set_intfdata(intf, NULL); +} + +static int synusb_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct input_dev *input_dev = synusb->input; + + mutex_lock(&input_dev->mutex); + usb_kill_urb(synusb->urb); + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int synusb_resume(struct usb_interface *intf) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct input_dev *input_dev = synusb->input; + int retval = 0; + + mutex_lock(&input_dev->mutex); + + if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) && + usb_submit_urb(synusb->urb, GFP_NOIO) < 0) { + retval = -EIO; + } + + mutex_unlock(&input_dev->mutex); + + return retval; +} + +static int synusb_pre_reset(struct usb_interface *intf) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct input_dev *input_dev = synusb->input; + + mutex_lock(&input_dev->mutex); + usb_kill_urb(synusb->urb); + + return 0; +} + +static int synusb_post_reset(struct usb_interface *intf) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct input_dev *input_dev = synusb->input; + int retval = 0; + + if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) && + usb_submit_urb(synusb->urb, GFP_NOIO) < 0) { + retval = -EIO; + } + + mutex_unlock(&input_dev->mutex); + + return retval; +} + +static int synusb_reset_resume(struct usb_interface *intf) +{ + return synusb_resume(intf); +} + +static struct usb_device_id synusb_idtable[] = { + { USB_DEVICE_SYNAPTICS(TP, SYNUSB_TOUCHPAD) }, + { USB_DEVICE_SYNAPTICS(INT_TP, SYNUSB_TOUCHPAD) }, + { USB_DEVICE_SYNAPTICS(CPAD, + SYNUSB_TOUCHPAD | SYNUSB_AUXDISPLAY | SYNUSB_IO_ALWAYS) }, + { USB_DEVICE_SYNAPTICS(TS, SYNUSB_TOUCHSCREEN) }, + { USB_DEVICE_SYNAPTICS(STICK, SYNUSB_STICK) }, + { USB_DEVICE_SYNAPTICS(WP, SYNUSB_TOUCHPAD) }, + { USB_DEVICE_SYNAPTICS(COMP_TP, SYNUSB_COMBO) }, + { USB_DEVICE_SYNAPTICS(WTP, SYNUSB_TOUCHPAD) }, + { USB_DEVICE_SYNAPTICS(DPAD, SYNUSB_TOUCHPAD) }, + { } +}; +MODULE_DEVICE_TABLE(usb, synusb_idtable); + +static struct usb_driver synusb_driver = { + .name = "synaptics_usb", + .probe = synusb_probe, + .disconnect = synusb_disconnect, + .id_table = synusb_idtable, + .suspend = synusb_suspend, + .resume = synusb_resume, + .pre_reset = synusb_pre_reset, + .post_reset = synusb_post_reset, + .reset_resume = synusb_reset_resume, + .supports_autosuspend = 1, +}; + +module_usb_driver(synusb_driver); + +MODULE_AUTHOR("Rob Miller <rob@inpharmatica.co.uk>, " + "Ron Lee <ron@debian.org>, " + "Jan Steinhoff <cpad@jan-steinhoff.de>"); +MODULE_DESCRIPTION("Synaptics USB device driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index 54b2fa892e1..ca843b6cf6b 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -20,9 +20,34 @@ #include "trackpoint.h" /* + * Power-on Reset: Resets all trackpoint parameters, including RAM values, + * to defaults. + * Returns zero on success, non-zero on failure. + */ +static int trackpoint_power_on_reset(struct ps2dev *ps2dev) +{ + unsigned char results[2]; + int tries = 0; + + /* Issue POR command, and repeat up to once if 0xFC00 received */ + do { + if (ps2_command(ps2dev, NULL, MAKE_PS2_CMD(0, 0, TP_COMMAND)) || + ps2_command(ps2dev, results, MAKE_PS2_CMD(0, 2, TP_POR))) + return -1; + } while (results[0] == 0xFC && results[1] == 0x00 && ++tries < 2); + + /* Check for success response -- 0xAA00 */ + if (results[0] != 0xAA || results[1] != 0x00) + return -1; + + return 0; +} + +/* * Device IO: read, write and toggle bit */ -static int trackpoint_read(struct ps2dev *ps2dev, unsigned char loc, unsigned char *results) +static int trackpoint_read(struct ps2dev *ps2dev, + unsigned char loc, unsigned char *results) { if (ps2_command(ps2dev, NULL, MAKE_PS2_CMD(0, 0, TP_COMMAND)) || ps2_command(ps2dev, results, MAKE_PS2_CMD(0, 1, loc))) { @@ -32,7 +57,8 @@ static int trackpoint_read(struct ps2dev *ps2dev, unsigned char loc, unsigned ch return 0; } -static int trackpoint_write(struct ps2dev *ps2dev, unsigned char loc, unsigned char val) +static int trackpoint_write(struct ps2dev *ps2dev, + unsigned char loc, unsigned char val) { if (ps2_command(ps2dev, NULL, MAKE_PS2_CMD(0, 0, TP_COMMAND)) || ps2_command(ps2dev, NULL, MAKE_PS2_CMD(0, 0, TP_WRITE_MEM)) || @@ -44,7 +70,8 @@ static int trackpoint_write(struct ps2dev *ps2dev, unsigned char loc, unsigned c return 0; } -static int trackpoint_toggle_bit(struct ps2dev *ps2dev, unsigned char loc, unsigned char mask) +static int trackpoint_toggle_bit(struct ps2dev *ps2dev, + unsigned char loc, unsigned char mask) { /* Bad things will happen if the loc param isn't in this range */ if (loc < 0x20 || loc >= 0x2F) @@ -60,6 +87,18 @@ static int trackpoint_toggle_bit(struct ps2dev *ps2dev, unsigned char loc, unsig return 0; } +static int trackpoint_update_bit(struct ps2dev *ps2dev, unsigned char loc, + unsigned char mask, unsigned char value) +{ + int retval = 0; + unsigned char data; + + trackpoint_read(ps2dev, loc, &data); + if (((data & mask) == mask) != !!value) + retval = trackpoint_toggle_bit(ps2dev, loc, mask); + + return retval; +} /* * Trackpoint-specific attributes @@ -69,6 +108,7 @@ struct trackpoint_attr_data { unsigned char command; unsigned char mask; unsigned char inverted; + unsigned char power_on_default; }; static ssize_t trackpoint_show_int_attr(struct psmouse *psmouse, void *data, char *buf) @@ -89,10 +129,12 @@ static ssize_t trackpoint_set_int_attr(struct psmouse *psmouse, void *data, struct trackpoint_data *tp = psmouse->private; struct trackpoint_attr_data *attr = data; unsigned char *field = (unsigned char *)((char *)tp + attr->field_offset); - unsigned long value; + unsigned char value; + int err; - if (strict_strtoul(buf, 10, &value) || value > 255) - return -EINVAL; + err = kstrtou8(buf, 10, &value); + if (err) + return err; *field = value; trackpoint_write(&psmouse->ps2dev, attr->command, value); @@ -100,10 +142,11 @@ static ssize_t trackpoint_set_int_attr(struct psmouse *psmouse, void *data, return count; } -#define TRACKPOINT_INT_ATTR(_name, _command) \ +#define TRACKPOINT_INT_ATTR(_name, _command, _default) \ static struct trackpoint_attr_data trackpoint_attr_##_name = { \ .field_offset = offsetof(struct trackpoint_data, _name), \ .command = _command, \ + .power_on_default = _default, \ }; \ PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ &trackpoint_attr_##_name, \ @@ -115,9 +158,14 @@ static ssize_t trackpoint_set_bit_attr(struct psmouse *psmouse, void *data, struct trackpoint_data *tp = psmouse->private; struct trackpoint_attr_data *attr = data; unsigned char *field = (unsigned char *)((char *)tp + attr->field_offset); - unsigned long value; + unsigned int value; + int err; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (attr->inverted) @@ -132,31 +180,60 @@ static ssize_t trackpoint_set_bit_attr(struct psmouse *psmouse, void *data, } -#define TRACKPOINT_BIT_ATTR(_name, _command, _mask, _inv) \ - static struct trackpoint_attr_data trackpoint_attr_##_name = { \ - .field_offset = offsetof(struct trackpoint_data, _name), \ - .command = _command, \ - .mask = _mask, \ - .inverted = _inv, \ - }; \ - PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ - &trackpoint_attr_##_name, \ - trackpoint_show_int_attr, trackpoint_set_bit_attr) - -TRACKPOINT_INT_ATTR(sensitivity, TP_SENS); -TRACKPOINT_INT_ATTR(speed, TP_SPEED); -TRACKPOINT_INT_ATTR(inertia, TP_INERTIA); -TRACKPOINT_INT_ATTR(reach, TP_REACH); -TRACKPOINT_INT_ATTR(draghys, TP_DRAGHYS); -TRACKPOINT_INT_ATTR(mindrag, TP_MINDRAG); -TRACKPOINT_INT_ATTR(thresh, TP_THRESH); -TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH); -TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME); -TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV); - -TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0); -TRACKPOINT_BIT_ATTR(skipback, TP_TOGGLE_SKIPBACK, TP_MASK_SKIPBACK, 0); -TRACKPOINT_BIT_ATTR(ext_dev, TP_TOGGLE_EXT_DEV, TP_MASK_EXT_DEV, 1); +#define TRACKPOINT_BIT_ATTR(_name, _command, _mask, _inv, _default) \ +static struct trackpoint_attr_data trackpoint_attr_##_name = { \ + .field_offset = offsetof(struct trackpoint_data, \ + _name), \ + .command = _command, \ + .mask = _mask, \ + .inverted = _inv, \ + .power_on_default = _default, \ + }; \ +PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ + &trackpoint_attr_##_name, \ + trackpoint_show_int_attr, trackpoint_set_bit_attr) + +#define TRACKPOINT_UPDATE_BIT(_psmouse, _tp, _name) \ +do { \ + struct trackpoint_attr_data *_attr = &trackpoint_attr_##_name; \ + \ + trackpoint_update_bit(&_psmouse->ps2dev, \ + _attr->command, _attr->mask, _tp->_name); \ +} while (0) + +#define TRACKPOINT_UPDATE(_power_on, _psmouse, _tp, _name) \ +do { \ + if (!_power_on || \ + _tp->_name != trackpoint_attr_##_name.power_on_default) { \ + if (!trackpoint_attr_##_name.mask) \ + trackpoint_write(&_psmouse->ps2dev, \ + trackpoint_attr_##_name.command, \ + _tp->_name); \ + else \ + TRACKPOINT_UPDATE_BIT(_psmouse, _tp, _name); \ + } \ +} while (0) + +#define TRACKPOINT_SET_POWER_ON_DEFAULT(_tp, _name) \ + (_tp->_name = trackpoint_attr_##_name.power_on_default) + +TRACKPOINT_INT_ATTR(sensitivity, TP_SENS, TP_DEF_SENS); +TRACKPOINT_INT_ATTR(speed, TP_SPEED, TP_DEF_SPEED); +TRACKPOINT_INT_ATTR(inertia, TP_INERTIA, TP_DEF_INERTIA); +TRACKPOINT_INT_ATTR(reach, TP_REACH, TP_DEF_REACH); +TRACKPOINT_INT_ATTR(draghys, TP_DRAGHYS, TP_DEF_DRAGHYS); +TRACKPOINT_INT_ATTR(mindrag, TP_MINDRAG, TP_DEF_MINDRAG); +TRACKPOINT_INT_ATTR(thresh, TP_THRESH, TP_DEF_THRESH); +TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH, TP_DEF_UP_THRESH); +TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME, TP_DEF_Z_TIME); +TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV, TP_DEF_JENKS_CURV); + +TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0, + TP_DEF_PTSON); +TRACKPOINT_BIT_ATTR(skipback, TP_TOGGLE_SKIPBACK, TP_MASK_SKIPBACK, 0, + TP_DEF_SKIPBACK); +TRACKPOINT_BIT_ATTR(ext_dev, TP_TOGGLE_EXT_DEV, TP_MASK_EXT_DEV, 1, + TP_DEF_EXT_DEV); static struct attribute *trackpoint_attrs[] = { &psmouse_attr_sensitivity.dattr.attr, @@ -195,73 +272,72 @@ static int trackpoint_start_protocol(struct psmouse *psmouse, unsigned char *fir return 0; } -static int trackpoint_sync(struct psmouse *psmouse) +/* + * Write parameters to trackpad. + * in_power_on_state: Set to true if TP is in default / power-on state (ex. if + * power-on reset was run). If so, values will only be + * written to TP if they differ from power-on default. + */ +static int trackpoint_sync(struct psmouse *psmouse, bool in_power_on_state) { struct trackpoint_data *tp = psmouse->private; - unsigned char toggle; - - /* Disable features that may make device unusable with this driver */ - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_TWOHAND, &toggle); - if (toggle & TP_MASK_TWOHAND) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_TWOHAND, TP_MASK_TWOHAND); - - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_SOURCE_TAG, &toggle); - if (toggle & TP_MASK_SOURCE_TAG) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_SOURCE_TAG, TP_MASK_SOURCE_TAG); - - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_MB, &toggle); - if (toggle & TP_MASK_MB) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_MB, TP_MASK_MB); - - /* Push the config to the device */ - trackpoint_write(&psmouse->ps2dev, TP_SENS, tp->sensitivity); - trackpoint_write(&psmouse->ps2dev, TP_INERTIA, tp->inertia); - trackpoint_write(&psmouse->ps2dev, TP_SPEED, tp->speed); - - trackpoint_write(&psmouse->ps2dev, TP_REACH, tp->reach); - trackpoint_write(&psmouse->ps2dev, TP_DRAGHYS, tp->draghys); - trackpoint_write(&psmouse->ps2dev, TP_MINDRAG, tp->mindrag); - - trackpoint_write(&psmouse->ps2dev, TP_THRESH, tp->thresh); - trackpoint_write(&psmouse->ps2dev, TP_UP_THRESH, tp->upthresh); - trackpoint_write(&psmouse->ps2dev, TP_Z_TIME, tp->ztime); - trackpoint_write(&psmouse->ps2dev, TP_JENKS_CURV, tp->jenks); + if (!in_power_on_state) { + /* + * Disable features that may make device unusable + * with this driver. + */ + trackpoint_update_bit(&psmouse->ps2dev, TP_TOGGLE_TWOHAND, + TP_MASK_TWOHAND, TP_DEF_TWOHAND); - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_PTSON, &toggle); - if (((toggle & TP_MASK_PTSON) == TP_MASK_PTSON) != tp->press_to_select) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_PTSON, TP_MASK_PTSON); + trackpoint_update_bit(&psmouse->ps2dev, TP_TOGGLE_SOURCE_TAG, + TP_MASK_SOURCE_TAG, TP_DEF_SOURCE_TAG); - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_SKIPBACK, &toggle); - if (((toggle & TP_MASK_SKIPBACK) == TP_MASK_SKIPBACK) != tp->skipback) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_SKIPBACK, TP_MASK_SKIPBACK); + trackpoint_update_bit(&psmouse->ps2dev, TP_TOGGLE_MB, + TP_MASK_MB, TP_DEF_MB); + } - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_EXT_DEV, &toggle); - if (((toggle & TP_MASK_EXT_DEV) == TP_MASK_EXT_DEV) != tp->ext_dev) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_EXT_DEV, TP_MASK_EXT_DEV); + /* + * These properties can be changed in this driver. Only + * configure them if the values are non-default or if the TP is in + * an unknown state. + */ + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, sensitivity); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, inertia); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, speed); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, reach); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, draghys); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, mindrag); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, thresh); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, upthresh); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ztime); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, jenks); + + /* toggles */ + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, press_to_select); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, skipback); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ext_dev); return 0; } static void trackpoint_defaults(struct trackpoint_data *tp) { - tp->press_to_select = TP_DEF_PTSON; - tp->sensitivity = TP_DEF_SENS; - tp->speed = TP_DEF_SPEED; - tp->reach = TP_DEF_REACH; - - tp->draghys = TP_DEF_DRAGHYS; - tp->mindrag = TP_DEF_MINDRAG; - - tp->thresh = TP_DEF_THRESH; - tp->upthresh = TP_DEF_UP_THRESH; - - tp->ztime = TP_DEF_Z_TIME; - tp->jenks = TP_DEF_JENKS_CURV; - - tp->inertia = TP_DEF_INERTIA; - tp->skipback = TP_DEF_SKIPBACK; - tp->ext_dev = TP_DEF_EXT_DEV; + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, sensitivity); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, speed); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, reach); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, draghys); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, mindrag); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, thresh); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, upthresh); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ztime); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, jenks); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, inertia); + + /* toggles */ + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, press_to_select); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, skipback); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ext_dev); } static void trackpoint_disconnect(struct psmouse *psmouse) @@ -274,10 +350,13 @@ static void trackpoint_disconnect(struct psmouse *psmouse) static int trackpoint_reconnect(struct psmouse *psmouse) { + int reset_fail; + if (trackpoint_start_protocol(psmouse, NULL)) return -1; - if (trackpoint_sync(psmouse)) + reset_fail = trackpoint_power_on_reset(&psmouse->ps2dev); + if (trackpoint_sync(psmouse, !reset_fail)) return -1; return 0; @@ -297,7 +376,7 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) return 0; if (trackpoint_read(&psmouse->ps2dev, TP_EXT_BTN, &button_info)) { - printk(KERN_WARNING "trackpoint.c: failed to get extended button data\n"); + psmouse_warn(psmouse, "failed to get extended button data\n"); button_info = 0; } @@ -315,20 +394,27 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) __set_bit(BTN_MIDDLE, psmouse->dev->keybit); trackpoint_defaults(psmouse->private); - trackpoint_sync(psmouse); + + error = trackpoint_power_on_reset(&psmouse->ps2dev); + + /* Write defaults to TP only if reset fails. */ + if (error) + trackpoint_sync(psmouse, false); error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group); if (error) { - printk(KERN_ERR - "trackpoint.c: failed to create sysfs attributes, error: %d\n", - error); + psmouse_err(psmouse, + "failed to create sysfs attributes, error: %d\n", + error); kfree(psmouse->private); psmouse->private = NULL; return -1; } - printk(KERN_INFO "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n", - firmware_id, (button_info & 0xf0) >> 4, button_info & 0x0f); + psmouse_info(psmouse, + "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n", + firmware_id, + (button_info & 0xf0) >> 4, button_info & 0x0f); return 0; } diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h index e558a709661..ecd0547964a 100644 --- a/drivers/input/mouse/trackpoint.h +++ b/drivers/input/mouse/trackpoint.h @@ -126,6 +126,8 @@ #define TP_DEF_PTSON 0x00 #define TP_DEF_SKIPBACK 0x00 #define TP_DEF_EXT_DEV 0x00 /* 0 means enabled */ +#define TP_DEF_TWOHAND 0x00 +#define TP_DEF_SOURCE_TAG 0x00 #define MAKE_PS2_CMD(params, results, cmd) ((params<<12) | (results<<8) | (cmd)) @@ -136,9 +138,9 @@ struct trackpoint_data unsigned char thresh, upthresh; unsigned char ztime, jenks; + /* toggles */ unsigned char press_to_select; unsigned char skipback; - unsigned char ext_dev; }; diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c index bf2c0c80d6c..38298232124 100644 --- a/drivers/input/mouse/vsxxxaa.c +++ b/drivers/input/mouse/vsxxxaa.c @@ -82,7 +82,6 @@ #include <linux/interrupt.h> #include <linux/input.h> #include <linux/serio.h> -#include <linux/init.h> #define DRIVER_DESC "Driver for DEC VSXXX-AA and -GA mice and VSXXX-AB tablet" @@ -334,7 +333,7 @@ static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse) * M: manufacturer location code * R: revision code * E: Error code. If it's in the range of 0x00..0x1f, only some - * minor problem occured. Errors >= 0x20 are considered bad + * minor problem occurred. Errors >= 0x20 are considered bad * and the device may not work properly... * D: <0010> == mouse, <0100> == tablet */ @@ -548,16 +547,4 @@ static struct serio_driver vsxxxaa_drv = { .disconnect = vsxxxaa_disconnect, }; -static int __init vsxxxaa_init(void) -{ - return serio_register_driver(&vsxxxaa_drv); -} - -static void __exit vsxxxaa_exit(void) -{ - serio_unregister_driver(&vsxxxaa_drv); -} - -module_init(vsxxxaa_init); -module_exit(vsxxxaa_exit); - +module_serio_driver(vsxxxaa_drv); |