1 files changed, 49 insertions, 47 deletions

diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
index 1f62c013401..afc66f56df4 100644
--- a/drivers/input/mouse/inport.c
+++ b/drivers/input/mouse/inport.c
@@ -87,40 +87,7 @@ MODULE_PARM_DESC(irq, "IRQ number (5=default)");
 
 __obsolete_setup("inport_irq=");
 
-static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-
-static int inport_open(struct input_dev *dev)
-{
-	if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL))
-		return -EBUSY;
-	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
-	outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
-
-	return 0;
-}
-
-static void inport_close(struct input_dev *dev)
-{
-	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
-	outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
-	free_irq(inport_irq, NULL);
-}
-
-static struct input_dev inport_dev = {
-	.evbit	= { BIT(EV_KEY) | BIT(EV_REL) },
-	.keybit	= { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
-	.relbit	= { BIT(REL_X) | BIT(REL_Y) },
-	.open	= inport_open,
-	.close	= inport_close,
-	.name	= INPORT_NAME,
-	.phys	= "isa023c/input0",
-	.id = {
-		.bustype = BUS_ISA,
-		.vendor  = INPORT_VENDOR,
-		.product = 0x0001,
-		.version = 0x0100,
-	},
-};
+static struct input_dev *inport_dev;
 
 static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
@@ -129,31 +96,48 @@ static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
 	outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
 
-	input_regs(&inport_dev, regs);
+	input_regs(inport_dev, regs);
 
 	outb(INPORT_REG_X, INPORT_CONTROL_PORT);
-	input_report_rel(&inport_dev, REL_X, inb(INPORT_DATA_PORT));
+	input_report_rel(inport_dev, REL_X, inb(INPORT_DATA_PORT));
 
 	outb(INPORT_REG_Y, INPORT_CONTROL_PORT);
-	input_report_rel(&inport_dev, REL_Y, inb(INPORT_DATA_PORT));
+	input_report_rel(inport_dev, REL_Y, inb(INPORT_DATA_PORT));
 
 	outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT);
 	buttons = inb(INPORT_DATA_PORT);
 
-	input_report_key(&inport_dev, BTN_MIDDLE, buttons & 1);
-	input_report_key(&inport_dev, BTN_LEFT,   buttons & 2);
-	input_report_key(&inport_dev, BTN_RIGHT,  buttons & 4);
+	input_report_key(inport_dev, BTN_MIDDLE, buttons & 1);
+	input_report_key(inport_dev, BTN_LEFT,   buttons & 2);
+	input_report_key(inport_dev, BTN_RIGHT,  buttons & 4);
 
 	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
 	outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
 
-	input_sync(&inport_dev);
+	input_sync(inport_dev);
 	return IRQ_HANDLED;
 }
 
+static int inport_open(struct input_dev *dev)
+{
+	if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL))
+		return -EBUSY;
+	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+	outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+	return 0;
+}
+
+static void inport_close(struct input_dev *dev)
+{
+	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+	outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
+	free_irq(inport_irq, NULL);
+}
+
 static int __init inport_init(void)
 {
-	unsigned char a,b,c;
+	unsigned char a, b, c;
 
 	if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) {
 		printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE);
@@ -163,26 +147,44 @@ static int __init inport_init(void)
 	a = inb(INPORT_SIGNATURE_PORT);
 	b = inb(INPORT_SIGNATURE_PORT);
 	c = inb(INPORT_SIGNATURE_PORT);
-	if (( a == b ) || ( a != c )) {
+	if (a == b || a != c) {
 		release_region(INPORT_BASE, INPORT_EXTENT);
 		printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
 		return -ENODEV;
 	}
 
+	if (!(inport_dev = input_allocate_device())) {
+		printk(KERN_ERR "inport.c: Not enough memory for input device\n");
+		release_region(INPORT_BASE, INPORT_EXTENT);
+		return -ENOMEM;
+	}
+
+	inport_dev->name = INPORT_NAME;
+	inport_dev->phys = "isa023c/input0";
+	inport_dev->id.bustype = BUS_ISA;
+	inport_dev->id.vendor  = INPORT_VENDOR;
+	inport_dev->id.product = 0x0001;
+	inport_dev->id.version = 0x0100;
+
+	inport_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+	inport_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+	inport_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+
+	inport_dev->open  = inport_open;
+	inport_dev->close = inport_close;
+
 	outb(INPORT_RESET, INPORT_CONTROL_PORT);
 	outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
 	outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
 
-	input_register_device(&inport_dev);
-
-	printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n", INPORT_BASE, inport_irq);
+	input_register_device(inport_dev);
 
 	return 0;
 }
 
 static void __exit inport_exit(void)
 {
-	input_unregister_device(&inport_dev);
+	input_unregister_device(inport_dev);
 	release_region(INPORT_BASE, INPORT_EXTENT);
 }