diff options
Diffstat (limited to 'drivers/input/mouse/alps.h')
| -rw-r--r-- | drivers/input/mouse/alps.h | 153 |
1 files changed, 146 insertions, 7 deletions
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 904ed8b3c8b..03f88b6940c 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -12,20 +12,159 @@ #ifndef _ALPS_H #define _ALPS_H +#define ALPS_PROTO_V1 1 +#define ALPS_PROTO_V2 2 +#define ALPS_PROTO_V3 3 +#define ALPS_PROTO_V4 4 +#define ALPS_PROTO_V5 5 +#define ALPS_PROTO_V6 6 + +#define DOLPHIN_COUNT_PER_ELECTRODE 64 +#define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */ +#define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */ + +/** + * struct alps_model_info - touchpad ID table + * @signature: E7 response string to match. + * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response + * (aka command mode response) identifies the firmware minor version. This + * can be used to distinguish different hardware models which are not + * uniquely identifiable through their E7 responses. + * @proto_version: Indicates V1/V2/V3/... + * @byte0: Helps figure out whether a position report packet matches the + * known format for this model. The first byte of the report, ANDed with + * mask0, should match byte0. + * @mask0: The mask used to check the first byte of the report. + * @flags: Additional device capabilities (passthrough port, trackstick, etc.). + * + * Many (but not all) ALPS touchpads can be identified by looking at the + * values returned in the "E7 report" and/or the "EC report." This table + * lists a number of such touchpads. + */ struct alps_model_info { - unsigned char signature[3]; - unsigned char byte0, mask0; - unsigned char flags; + unsigned char signature[3]; + unsigned char command_mode_resp; + unsigned char proto_version; + unsigned char byte0, mask0; + unsigned char flags; +}; + +/** + * struct alps_nibble_commands - encodings for register accesses + * @command: PS/2 command used for the nibble + * @data: Data supplied as an argument to the PS/2 command, if applicable + * + * The ALPS protocol uses magic sequences to transmit binary data to the + * touchpad, as it is generally not OK to send arbitrary bytes out the + * PS/2 port. Each of the sequences in this table sends one nibble of the + * register address or (write) data. Different versions of the ALPS protocol + * use slightly different encodings. + */ +struct alps_nibble_commands { + int command; + unsigned char data; +}; + +/** + * struct alps_fields - decoded version of the report packet + * @x_map: Bitmap of active X positions for MT. + * @y_map: Bitmap of active Y positions for MT. + * @fingers: Number of fingers for MT. + * @x: X position for ST. + * @y: Y position for ST. + * @z: Z position for ST. + * @first_mp: Packet is the first of a multi-packet report. + * @is_mp: Packet is part of a multi-packet report. + * @left: Left touchpad button is active. + * @right: Right touchpad button is active. + * @middle: Middle touchpad button is active. + * @ts_left: Left trackstick button is active. + * @ts_right: Right trackstick button is active. + * @ts_middle: Middle trackstick button is active. + */ +struct alps_fields { + unsigned int x_map; + unsigned int y_map; + unsigned int fingers; + unsigned int x; + unsigned int y; + unsigned int z; + unsigned int first_mp:1; + unsigned int is_mp:1; + + unsigned int left:1; + unsigned int right:1; + unsigned int middle:1; + + unsigned int ts_left:1; + unsigned int ts_right:1; + unsigned int ts_middle:1; }; +/** + * struct alps_data - private data structure for the ALPS driver + * @dev2: "Relative" device used to report trackstick or mouse activity. + * @phys: Physical path for the relative device. + * @nibble_commands: Command mapping used for touchpad register accesses. + * @addr_command: Command used to tell the touchpad that a register address + * follows. + * @proto_version: Indicates V1/V2/V3/... + * @byte0: Helps figure out whether a position report packet matches the + * known format for this model. The first byte of the report, ANDed with + * mask0, should match byte0. + * @mask0: The mask used to check the first byte of the report. + * @flags: Additional device capabilities (passthrough port, trackstick, etc.). + * @x_max: Largest possible X position value. + * @y_max: Largest possible Y position value. + * @x_bits: Number of X bits in the MT bitmap. + * @y_bits: Number of Y bits in the MT bitmap. + * @hw_init: Protocol-specific hardware init function. + * @process_packet: Protocol-specific function to process a report packet. + * @decode_fields: Protocol-specific function to read packet bitfields. + * @set_abs_params: Protocol-specific function to configure the input_dev. + * @prev_fin: Finger bit from previous packet. + * @multi_packet: Multi-packet data in progress. + * @multi_data: Saved multi-packet data. + * @x1: First X coordinate from last MT report. + * @x2: Second X coordinate from last MT report. + * @y1: First Y coordinate from last MT report. + * @y2: Second Y coordinate from last MT report. + * @fingers: Number of fingers from last MT report. + * @quirks: Bitmap of ALPS_QUIRK_*. + * @timer: Timer for flushing out the final report packet in the stream. + */ struct alps_data { - struct input_dev *dev2; /* Relative device */ - char phys[32]; /* Phys */ - const struct alps_model_info *i;/* Info */ - int prev_fin; /* Finger bit from previous packet */ + struct input_dev *dev2; + char phys[32]; + + /* these are autodetected when the device is identified */ + const struct alps_nibble_commands *nibble_commands; + int addr_command; + unsigned char proto_version; + unsigned char byte0, mask0; + unsigned char flags; + int x_max; + int y_max; + int x_bits; + int y_bits; + + int (*hw_init)(struct psmouse *psmouse); + void (*process_packet)(struct psmouse *psmouse); + void (*decode_fields)(struct alps_fields *f, unsigned char *p, + struct psmouse *psmouse); + void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); + + int prev_fin; + int multi_packet; + unsigned char multi_data[6]; + int x1, x2, y1, y2; + int fingers; + u8 quirks; struct timer_list timer; }; +#define ALPS_QUIRK_TRACKSTICK_BUTTONS 1 /* trakcstick buttons in trackstick packet */ + #ifdef CONFIG_MOUSE_PS2_ALPS int alps_detect(struct psmouse *psmouse, bool set_properties); int alps_init(struct psmouse *psmouse); |