diff options
Diffstat (limited to 'drivers/input/keyboard/nomadik-ske-keypad.c')
| -rw-r--r-- | drivers/input/keyboard/nomadik-ske-keypad.c | 167 |
1 files changed, 99 insertions, 68 deletions
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c index 6e0f2309136..63332e2f862 100644 --- a/drivers/input/keyboard/nomadik-ske-keypad.c +++ b/drivers/input/keyboard/nomadik-ske-keypad.c @@ -18,8 +18,9 @@ #include <linux/input.h> #include <linux/slab.h> #include <linux/clk.h> +#include <linux/module.h> -#include <plat/ske.h> +#include <linux/platform_data/keypad-nomadik-ske.h> /* SKE_CR bits */ #define SKE_KPMLT (0x1 << 6) @@ -38,7 +39,8 @@ #define SKE_KPRISA (0x1 << 2) #define SKE_KEYPAD_ROW_SHIFT 3 -#define SKE_KPD_KEYMAP_SIZE (8 * 8) +#define SKE_KPD_NUM_ROWS 8 +#define SKE_KPD_NUM_COLS 8 /* keypad auto scan registers */ #define SKE_ASR0 0x20 @@ -47,6 +49,7 @@ #define SKE_ASR3 0x2C #define SKE_NUM_ASRX_REGISTERS (4) +#define KEY_PRESSED_DELAY 10 /** * struct ske_keypad - data structure used by keypad driver @@ -62,8 +65,9 @@ struct ske_keypad { void __iomem *reg_base; struct input_dev *input; const struct ske_keypad_platform_data *board; - unsigned short keymap[SKE_KPD_KEYMAP_SIZE]; + unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS]; struct clk *clk; + struct clk *pclk; spinlock_t ske_keypad_lock; }; @@ -87,10 +91,10 @@ static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr, * * Enable Multi key press detection, auto scan mode */ -static int __devinit ske_keypad_chip_init(struct ske_keypad *keypad) +static int __init ske_keypad_chip_init(struct ske_keypad *keypad) { u32 value; - int timeout = 50; + int timeout = keypad->board->debounce_ms; /* check SKE_RIS to be 0 */ while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--) @@ -133,12 +137,37 @@ static int __devinit ske_keypad_chip_init(struct ske_keypad *keypad) return 0; } -static void ske_keypad_read_data(struct ske_keypad *keypad) +static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col) { + int row = 0, code, pos; struct input_dev *input = keypad->input; - u16 status; - int col = 0, row = 0, code; - int ske_asr, ske_ris, key_pressed, i; + u32 ske_ris; + int key_pressed; + int num_of_rows; + + /* find out the row */ + num_of_rows = hweight8(status); + do { + pos = __ffs(status); + row = pos; + status &= ~(1 << pos); + + code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT); + ske_ris = readl(keypad->reg_base + SKE_RIS); + key_pressed = ske_ris & SKE_KPRISA; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], key_pressed); + input_sync(input); + num_of_rows--; + } while (num_of_rows); +} + +static void ske_keypad_read_data(struct ske_keypad *keypad) +{ + u8 status; + int col = 0; + int ske_asr, i; /* * Read the auto scan registers @@ -152,44 +181,38 @@ static void ske_keypad_read_data(struct ske_keypad *keypad) if (!ske_asr) continue; - /* now that ASRx is zero, find out the column x and row y*/ - if (ske_asr & 0xff) { + /* now that ASRx is zero, find out the coloumn x and row y */ + status = ske_asr & 0xff; + if (status) { col = i * 2; - status = ske_asr & 0xff; - } else { + ske_keypad_report(keypad, status, col); + } + status = (ske_asr & 0xff00) >> 8; + if (status) { col = (i * 2) + 1; - status = (ske_asr & 0xff00) >> 8; + ske_keypad_report(keypad, status, col); } - - /* find out the row */ - row = __ffs(status); - - code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT); - ske_ris = readl(keypad->reg_base + SKE_RIS); - key_pressed = ske_ris & SKE_KPRISA; - - input_event(input, EV_MSC, MSC_SCAN, code); - input_report_key(input, keypad->keymap[code], key_pressed); - input_sync(input); } } static irqreturn_t ske_keypad_irq(int irq, void *dev_id) { struct ske_keypad *keypad = dev_id; - int retries = 20; + int timeout = keypad->board->debounce_ms; /* disable auto scan interrupt; mask the interrupt generated */ ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA); - while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --retries) - msleep(5); + while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout) + cpu_relax(); - if (retries) { - /* SKEx registers are stable and can be read */ - ske_keypad_read_data(keypad); - } + /* SKEx registers are stable and can be read */ + ske_keypad_read_data(keypad); + + /* wait until raw interrupt is clear */ + while ((readl(keypad->reg_base + SKE_RIS)) && --timeout) + msleep(KEY_PRESSED_DELAY); /* enable auto scan interrupts */ ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); @@ -197,9 +220,10 @@ static irqreturn_t ske_keypad_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static int __devinit ske_keypad_probe(struct platform_device *pdev) +static int __init ske_keypad_probe(struct platform_device *pdev) { - const struct ske_keypad_platform_data *plat = pdev->dev.platform_data; + const struct ske_keypad_platform_data *plat = + dev_get_platdata(&pdev->dev); struct ske_keypad *keypad; struct input_dev *input; struct resource *res; @@ -249,31 +273,48 @@ static int __devinit ske_keypad_probe(struct platform_device *pdev) goto err_free_mem_region; } + keypad->pclk = clk_get(&pdev->dev, "apb_pclk"); + if (IS_ERR(keypad->pclk)) { + dev_err(&pdev->dev, "failed to get pclk\n"); + error = PTR_ERR(keypad->pclk); + goto err_iounmap; + } + keypad->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(keypad->clk)) { dev_err(&pdev->dev, "failed to get clk\n"); error = PTR_ERR(keypad->clk); - goto err_iounmap; + goto err_pclk; } input->id.bustype = BUS_HOST; input->name = "ux500-ske-keypad"; input->dev.parent = &pdev->dev; - input->keycode = keypad->keymap; - input->keycodesize = sizeof(keypad->keymap[0]); - input->keycodemax = ARRAY_SIZE(keypad->keymap); + error = matrix_keypad_build_keymap(plat->keymap_data, NULL, + SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS, + keypad->keymap, input); + if (error) { + dev_err(&pdev->dev, "Failed to build keymap\n"); + goto err_clk; + } input_set_capability(input, EV_MSC, MSC_SCAN); - - __set_bit(EV_KEY, input->evbit); if (!plat->no_autorepeat) __set_bit(EV_REP, input->evbit); - matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT, - input->keycode, input->keybit); + error = clk_prepare_enable(keypad->pclk); + if (error) { + dev_err(&pdev->dev, "Failed to prepare/enable pclk\n"); + goto err_clk; + } + + error = clk_prepare_enable(keypad->clk); + if (error) { + dev_err(&pdev->dev, "Failed to prepare/enable clk\n"); + goto err_pclk_disable; + } - clk_enable(keypad->clk); /* go through board initialization helpers */ if (keypad->board->init) @@ -309,8 +350,13 @@ static int __devinit ske_keypad_probe(struct platform_device *pdev) err_free_irq: free_irq(keypad->irq, keypad); err_clk_disable: - clk_disable(keypad->clk); + clk_disable_unprepare(keypad->clk); +err_pclk_disable: + clk_disable_unprepare(keypad->pclk); +err_clk: clk_put(keypad->clk); +err_pclk: + clk_put(keypad->pclk); err_iounmap: iounmap(keypad->reg_base); err_free_mem_region: @@ -321,7 +367,7 @@ err_free_mem: return error; } -static int __devexit ske_keypad_remove(struct platform_device *pdev) +static int ske_keypad_remove(struct platform_device *pdev) { struct ske_keypad *keypad = platform_get_drvdata(pdev); struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -330,7 +376,7 @@ static int __devexit ske_keypad_remove(struct platform_device *pdev) input_unregister_device(keypad->input); - clk_disable(keypad->clk); + clk_disable_unprepare(keypad->clk); clk_put(keypad->clk); if (keypad->board->exit) @@ -343,7 +389,7 @@ static int __devexit ske_keypad_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ske_keypad_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -371,36 +417,21 @@ static int ske_keypad_resume(struct device *dev) return 0; } - -static const struct dev_pm_ops ske_keypad_dev_pm_ops = { - .suspend = ske_keypad_suspend, - .resume = ske_keypad_resume, -}; #endif -struct platform_driver ske_keypad_driver = { +static SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops, + ske_keypad_suspend, ske_keypad_resume); + +static struct platform_driver ske_keypad_driver = { .driver = { .name = "nmk-ske-keypad", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &ske_keypad_dev_pm_ops, -#endif }, - .probe = ske_keypad_probe, - .remove = __devexit_p(ske_keypad_remove), + .remove = ske_keypad_remove, }; -static int __init ske_keypad_init(void) -{ - return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe); -} -module_init(ske_keypad_init); - -static void __exit ske_keypad_exit(void) -{ - platform_driver_unregister(&ske_keypad_driver); -} -module_exit(ske_keypad_exit); +module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>"); |