1 files changed, 618 insertions, 266 deletions

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 4a95adc4cc7..2dd1d0dd4f7 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -40,35 +40,41 @@ module_param_named(set, atkbd_set, int, 0);
 MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)");
 
 #if defined(__i386__) || defined(__x86_64__) || defined(__hppa__)
-static int atkbd_reset;
+static bool atkbd_reset;
 #else
-static int atkbd_reset = 1;
+static bool atkbd_reset = true;
 #endif
 module_param_named(reset, atkbd_reset, bool, 0);
 MODULE_PARM_DESC(reset, "Reset keyboard during initialization");
 
-static int atkbd_softrepeat;
+static bool atkbd_softrepeat;
 module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
 MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
 
-static int atkbd_softraw = 1;
+static bool atkbd_softraw = true;
 module_param_named(softraw, atkbd_softraw, bool, 0);
 MODULE_PARM_DESC(softraw, "Use software generated rawmode");
 
-static int atkbd_scroll;
+static bool atkbd_scroll;
 module_param_named(scroll, atkbd_scroll, bool, 0);
 MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
 
-static int atkbd_extra;
+static bool atkbd_extra;
 module_param_named(extra, atkbd_extra, bool, 0);
 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
 
+static bool atkbd_terminal;
+module_param_named(terminal, atkbd_terminal, bool, 0);
+MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
+
 /*
  * Scancode to keycode tables. These are just the default setting, and
- * are loadable via an userland utility.
+ * are loadable via a userland utility.
  */
 
-static unsigned char atkbd_set2_keycode[512] = {
+#define ATKBD_KEYMAP_SIZE	512
+
+static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = {
 
 #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
 
@@ -99,7 +105,7 @@ static unsigned char atkbd_set2_keycode[512] = {
 #endif
 };
 
-static unsigned char atkbd_set3_keycode[512] = {
+static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = {
 
 	  0,  0,  0,  0,  0,  0,  0, 59,  1,138,128,129,130, 15, 41, 60,
 	131, 29, 42, 86, 58, 16,  2, 61,133, 56, 44, 31, 30, 17,  3, 62,
@@ -115,7 +121,7 @@ static unsigned char atkbd_set3_keycode[512] = {
 	148,149,147,140
 };
 
-static unsigned char atkbd_unxlate_table[128] = {
+static const unsigned short atkbd_unxlate_table[128] = {
           0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
          21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
          35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
@@ -132,8 +138,10 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_CMD_GETID		0x02f2
 #define ATKBD_CMD_SETREP	0x10f3
 #define ATKBD_CMD_ENABLE	0x00f4
-#define ATKBD_CMD_RESET_DIS	0x00f5
-#define ATKBD_CMD_SETALL_MBR	0x00fa
+#define ATKBD_CMD_RESET_DIS	0x00f5	/* Reset to defaults and disable */
+#define ATKBD_CMD_RESET_DEF	0x00f6	/* Reset to defaults */
+#define ATKBD_CMD_SETALL_MB	0x00f8	/* Set all keys to give break codes */
+#define ATKBD_CMD_SETALL_MBR	0x00fa  /* ... and repeat */
 #define ATKBD_CMD_RESET_BAT	0x02ff
 #define ATKBD_CMD_RESEND	0x00fe
 #define ATKBD_CMD_EX_ENABLE	0x10ea
@@ -150,18 +158,18 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_RET_HANGEUL	0xf2
 #define ATKBD_RET_ERR		0xff
 
-#define ATKBD_KEY_UNKNOWN	  0
+#define ATKBD_KEY_UNKNOWN	0
 #define ATKBD_KEY_NULL		255
 
-#define ATKBD_SCR_1		254
-#define ATKBD_SCR_2		253
-#define ATKBD_SCR_4		252
-#define ATKBD_SCR_8		251
-#define ATKBD_SCR_CLICK		250
-#define ATKBD_SCR_LEFT		249
-#define ATKBD_SCR_RIGHT		248
+#define ATKBD_SCR_1		0xfffe
+#define ATKBD_SCR_2		0xfffd
+#define ATKBD_SCR_4		0xfffc
+#define ATKBD_SCR_8		0xfffb
+#define ATKBD_SCR_CLICK		0xfffa
+#define ATKBD_SCR_LEFT		0xfff9
+#define ATKBD_SCR_RIGHT		0xfff8
 
-#define ATKBD_SPECIAL		248
+#define ATKBD_SPECIAL		ATKBD_SCR_RIGHT
 
 #define ATKBD_LED_EVENT_BIT	0
 #define ATKBD_REP_EVENT_BIT	1
@@ -173,8 +181,8 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_XL_HANGEUL	0x10
 #define ATKBD_XL_HANJA		0x20
 
-static struct {
-	unsigned char keycode;
+static const struct {
+	unsigned short keycode;
 	unsigned char set2;
 } atkbd_scroll_keys[] = {
 	{ ATKBD_SCR_1,     0xc5 },
@@ -200,21 +208,21 @@ struct atkbd {
 	char phys[32];
 
 	unsigned short id;
-	unsigned char keycode[512];
-	DECLARE_BITMAP(force_release_mask, 512);
+	unsigned short keycode[ATKBD_KEYMAP_SIZE];
+	DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE);
 	unsigned char set;
-	unsigned char translated;
-	unsigned char extra;
-	unsigned char write;
-	unsigned char softrepeat;
-	unsigned char softraw;
-	unsigned char scroll;
-	unsigned char enabled;
+	bool translated;
+	bool extra;
+	bool write;
+	bool softrepeat;
+	bool softraw;
+	bool scroll;
+	bool enabled;
 
 	/* Accessed only from interrupt */
 	unsigned char emul;
-	unsigned char resend;
-	unsigned char release;
+	bool resend;
+	bool release;
 	unsigned long xl_bit;
 	unsigned int last;
 	unsigned long time;
@@ -222,14 +230,24 @@ struct atkbd {
 
 	struct delayed_work event_work;
 	unsigned long event_jiffies;
-	struct mutex event_mutex;
 	unsigned long event_mask;
+
+	/* Serializes reconnect(), attr->set() and event work */
+	struct mutex mutex;
 };
 
 /*
- * System-specific ketymap fixup routine
+ * System-specific keymap fixup routine
+ */
+static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
+static void *atkbd_platform_fixup_data;
+static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int);
+
+/*
+ * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding
+ * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed.
  */
-static void (*atkbd_platform_fixup)(struct atkbd *);
+static bool atkbd_skip_deactivate;
 
 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
 				ssize_t (*handler)(struct atkbd *, char *));
@@ -252,6 +270,7 @@ static struct device_attribute atkbd_attr_##_name =				\
 	__ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name);
 
 ATKBD_DEFINE_ATTR(extra);
+ATKBD_DEFINE_ATTR(force_release);
 ATKBD_DEFINE_ATTR(scroll);
 ATKBD_DEFINE_ATTR(set);
 ATKBD_DEFINE_ATTR(softrepeat);
@@ -271,6 +290,7 @@ ATKBD_DEFINE_RO_ATTR(err_count);
 
 static struct attribute *atkbd_attributes[] = {
 	&atkbd_attr_extra.attr,
+	&atkbd_attr_force_release.attr,
 	&atkbd_attr_scroll.attr,
 	&atkbd_attr_set.attr,
 	&atkbd_attr_softrepeat.attr,
@@ -292,18 +312,18 @@ static const unsigned int xl_table[] = {
  * Checks if we should mangle the scancode to extract 'release' bit
  * in translated mode.
  */
-static int atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
+static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
 {
 	int i;
 
 	if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1)
-		return 0;
+		return false;
 
 	for (i = 0; i < ARRAY_SIZE(xl_table); i++)
 		if (code == xl_table[i])
 			return test_bit(i, &xl_bit);
 
-	return 1;
+	return true;
 }
 
 /*
@@ -350,29 +370,27 @@ static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code
  */
 
 static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
-			unsigned int flags)
+				   unsigned int flags)
 {
 	struct atkbd *atkbd = serio_get_drvdata(serio);
 	struct input_dev *dev = atkbd->dev;
 	unsigned int code = data;
 	int scroll = 0, hscroll = 0, click = -1;
 	int value;
-	unsigned char keycode;
+	unsigned short keycode;
 
-#ifdef ATKBD_DEBUG
-	printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
-#endif
+	dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags);
 
 #if !defined(__i386__) && !defined (__x86_64__)
 	if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
-		printk(KERN_WARNING "atkbd.c: frame/parity error: %02x\n", flags);
+		dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags);
 		serio_write(serio, ATKBD_CMD_RESEND);
-		atkbd->resend = 1;
+		atkbd->resend = true;
 		goto out;
 	}
 
 	if (!flags && data == ATKBD_RET_ACK)
-		atkbd->resend = 0;
+		atkbd->resend = false;
 #endif
 
 	if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK))
@@ -388,6 +406,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 
 	input_event(dev, EV_MSC, MSC_RAW, code);
 
+	if (atkbd_platform_scancode_fixup)
+		code = atkbd_platform_scancode_fixup(atkbd, code);
+
 	if (atkbd->translated) {
 
 		if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) {
@@ -400,32 +421,32 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 	}
 
 	switch (code) {
-		case ATKBD_RET_BAT:
-			atkbd->enabled = 0;
-			serio_reconnect(atkbd->ps2dev.serio);
-			goto out;
-		case ATKBD_RET_EMUL0:
-			atkbd->emul = 1;
-			goto out;
-		case ATKBD_RET_EMUL1:
-			atkbd->emul = 2;
-			goto out;
-		case ATKBD_RET_RELEASE:
-			atkbd->release = 1;
-			goto out;
-		case ATKBD_RET_ACK:
-		case ATKBD_RET_NAK:
-			if (printk_ratelimit())
-				printk(KERN_WARNING "atkbd.c: Spurious %s on %s. "
-				       "Some program might be trying access hardware directly.\n",
-				       data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
-			goto out;
-		case ATKBD_RET_ERR:
-			atkbd->err_count++;
-#ifdef ATKBD_DEBUG
-			printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys);
-#endif
-			goto out;
+	case ATKBD_RET_BAT:
+		atkbd->enabled = false;
+		serio_reconnect(atkbd->ps2dev.serio);
+		goto out;
+	case ATKBD_RET_EMUL0:
+		atkbd->emul = 1;
+		goto out;
+	case ATKBD_RET_EMUL1:
+		atkbd->emul = 2;
+		goto out;
+	case ATKBD_RET_RELEASE:
+		atkbd->release = true;
+		goto out;
+	case ATKBD_RET_ACK:
+	case ATKBD_RET_NAK:
+		if (printk_ratelimit())
+			dev_warn(&serio->dev,
+				 "Spurious %s on %s. "
+				 "Some program might be trying to access hardware directly.\n",
+				 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
+		goto out;
+	case ATKBD_RET_ERR:
+		atkbd->err_count++;
+		dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n",
+			serio->phys);
+		goto out;
 	}
 
 	code = atkbd_compat_scancode(atkbd, code);
@@ -439,71 +460,72 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 		input_event(dev, EV_MSC, MSC_SCAN, code);
 
 	switch (keycode) {
-		case ATKBD_KEY_NULL:
-			break;
-		case ATKBD_KEY_UNKNOWN:
-			printk(KERN_WARNING
-			       "atkbd.c: Unknown key %s (%s set %d, code %#x on %s).\n",
-			       atkbd->release ? "released" : "pressed",
-			       atkbd->translated ? "translated" : "raw",
-			       atkbd->set, code, serio->phys);
-			printk(KERN_WARNING
-			       "atkbd.c: Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
-			       code & 0x80 ? "e0" : "", code & 0x7f);
-			input_sync(dev);
-			break;
-		case ATKBD_SCR_1:
-			scroll = 1 - atkbd->release * 2;
-			break;
-		case ATKBD_SCR_2:
-			scroll = 2 - atkbd->release * 4;
-			break;
-		case ATKBD_SCR_4:
-			scroll = 4 - atkbd->release * 8;
-			break;
-		case ATKBD_SCR_8:
-			scroll = 8 - atkbd->release * 16;
-			break;
-		case ATKBD_SCR_CLICK:
-			click = !atkbd->release;
-			break;
-		case ATKBD_SCR_LEFT:
-			hscroll = -1;
-			break;
-		case ATKBD_SCR_RIGHT:
-			hscroll = 1;
-			break;
-		default:
-			if (atkbd->release) {
-				value = 0;
-				atkbd->last = 0;
-			} else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
-				/* Workaround Toshiba laptop multiple keypress */
-				value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
-			} else {
-				value = 1;
-				atkbd->last = code;
-				atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
-			}
-
-			input_event(dev, EV_KEY, keycode, value);
-			input_sync(dev);
+	case ATKBD_KEY_NULL:
+		break;
+	case ATKBD_KEY_UNKNOWN:
+		dev_warn(&serio->dev,
+			 "Unknown key %s (%s set %d, code %#x on %s).\n",
+			 atkbd->release ? "released" : "pressed",
+			 atkbd->translated ? "translated" : "raw",
+			 atkbd->set, code, serio->phys);
+		dev_warn(&serio->dev,
+			 "Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
+			 code & 0x80 ? "e0" : "", code & 0x7f);
+		input_sync(dev);
+		break;
+	case ATKBD_SCR_1:
+		scroll = 1;
+		break;
+	case ATKBD_SCR_2:
+		scroll = 2;
+		break;
+	case ATKBD_SCR_4:
+		scroll = 4;
+		break;
+	case ATKBD_SCR_8:
+		scroll = 8;
+		break;
+	case ATKBD_SCR_CLICK:
+		click = !atkbd->release;
+		break;
+	case ATKBD_SCR_LEFT:
+		hscroll = -1;
+		break;
+	case ATKBD_SCR_RIGHT:
+		hscroll = 1;
+		break;
+	default:
+		if (atkbd->release) {
+			value = 0;
+			atkbd->last = 0;
+		} else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
+			/* Workaround Toshiba laptop multiple keypress */
+			value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
+		} else {
+			value = 1;
+			atkbd->last = code;
+			atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
+		}
 
-			if (value && test_bit(code, atkbd->force_release_mask)) {
-				input_report_key(dev, keycode, 0);
-				input_sync(dev);
-			}
+		input_event(dev, EV_KEY, keycode, value);
+		input_sync(dev);
+
+		if (value && test_bit(code, atkbd->force_release_mask)) {
+			input_report_key(dev, keycode, 0);
+			input_sync(dev);
+		}
 	}
 
 	if (atkbd->scroll) {
 		if (click != -1)
 			input_report_key(dev, BTN_MIDDLE, click);
-		input_report_rel(dev, REL_WHEEL, scroll);
+		input_report_rel(dev, REL_WHEEL,
+				 atkbd->release ? -scroll : scroll);
 		input_report_rel(dev, REL_HWHEEL, hscroll);
 		input_sync(dev);
 	}
 
-	atkbd->release = 0;
+	atkbd->release = false;
 out:
 	return IRQ_HANDLED;
 }
@@ -567,15 +589,26 @@ static void atkbd_event_work(struct work_struct *work)
 {
 	struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work);
 
-	mutex_lock(&atkbd->event_mutex);
+	mutex_lock(&atkbd->mutex);
 
-	if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
-		atkbd_set_leds(atkbd);
+	if (!atkbd->enabled) {
+		/*
+		 * Serio ports are resumed asynchronously so while driver core
+		 * thinks that device is already fully operational in reality
+		 * it may not be ready yet. In this case we need to keep
+		 * rescheduling till reconnect completes.
+		 */
+		schedule_delayed_work(&atkbd->event_work,
+					msecs_to_jiffies(100));
+	} else {
+		if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
+			atkbd_set_leds(atkbd);
 
-	if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
-		atkbd_set_repeat_rate(atkbd);
+		if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
+			atkbd_set_repeat_rate(atkbd);
+	}
 
-	mutex_unlock(&atkbd->event_mutex);
+	mutex_unlock(&atkbd->mutex);
 }
 
 /*
@@ -591,7 +624,7 @@ static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit)
 
 	atkbd->event_jiffies = jiffies;
 	set_bit(event_bit, &atkbd->event_mask);
-	wmb();
+	mb();
 	schedule_delayed_work(&atkbd->event_work, delay);
 }
 
@@ -611,17 +644,18 @@ static int atkbd_event(struct input_dev *dev,
 
 	switch (type) {
 
-		case EV_LED:
-			atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
-			return 0;
+	case EV_LED:
+		atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
+		return 0;
 
-		case EV_REP:
-			if (!atkbd->softrepeat)
-				atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
-			return 0;
-	}
+	case EV_REP:
+		if (!atkbd->softrepeat)
+			atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
+		return 0;
 
-	return -1;
+	default:
+		return -1;
+	}
 }
 
 /*
@@ -632,7 +666,7 @@ static int atkbd_event(struct input_dev *dev,
 static inline void atkbd_enable(struct atkbd *atkbd)
 {
 	serio_pause_rx(atkbd->ps2dev.serio);
-	atkbd->enabled = 1;
+	atkbd->enabled = true;
 	serio_continue_rx(atkbd->ps2dev.serio);
 }
 
@@ -644,10 +678,43 @@ static inline void atkbd_enable(struct atkbd *atkbd)
 static inline void atkbd_disable(struct atkbd *atkbd)
 {
 	serio_pause_rx(atkbd->ps2dev.serio);
-	atkbd->enabled = 0;
+	atkbd->enabled = false;
 	serio_continue_rx(atkbd->ps2dev.serio);
 }
 
+static int atkbd_activate(struct atkbd *atkbd)
+{
+	struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+/*
+ * Enable the keyboard to receive keystrokes.
+ */
+
+	if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
+		dev_err(&ps2dev->serio->dev,
+			"Failed to enable keyboard on %s\n",
+			ps2dev->serio->phys);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * atkbd_deactivate() resets and disables the keyboard from sending
+ * keystrokes.
+ */
+
+static void atkbd_deactivate(struct atkbd *atkbd)
+{
+	struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+	if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS))
+		dev_err(&ps2dev->serio->dev,
+			"Failed to deactivate keyboard on %s\n",
+			ps2dev->serio->phys);
+}
+
 /*
  * atkbd_probe() probes for an AT keyboard on a serio port.
  */
@@ -665,7 +732,9 @@ static int atkbd_probe(struct atkbd *atkbd)
 
 	if (atkbd_reset)
 		if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT))
-			printk(KERN_WARNING "atkbd.c: keyboard reset failed on %s\n", ps2dev->serio->phys);
+			dev_warn(&ps2dev->serio->dev,
+				 "keyboard reset failed on %s\n",
+				 ps2dev->serio->phys);
 
 /*
  * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
@@ -695,11 +764,19 @@ static int atkbd_probe(struct atkbd *atkbd)
 	atkbd->id = (param[0] << 8) | param[1];
 
 	if (atkbd->id == 0xaca1 && atkbd->translated) {
-		printk(KERN_ERR "atkbd.c: NCD terminal keyboards are only supported on non-translating\n");
-		printk(KERN_ERR "atkbd.c: controllers. Use i8042.direct=1 to disable translation.\n");
+		dev_err(&ps2dev->serio->dev,
+			"NCD terminal keyboards are only supported on non-translating controllers. "
+			"Use i8042.direct=1 to disable translation.\n");
 		return -1;
 	}
 
+/*
+ * Make sure nothing is coming from the keyboard and disturbs our
+ * internal state.
+ */
+	if (!atkbd_skip_deactivate)
+		atkbd_deactivate(atkbd);
+
 	return 0;
 }
 
@@ -714,7 +791,7 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 	struct ps2dev *ps2dev = &atkbd->ps2dev;
 	unsigned char param[2];
 
-	atkbd->extra = 0;
+	atkbd->extra = false;
 /*
  * For known special keyboards we can go ahead and set the correct set.
  * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and
@@ -733,11 +810,16 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 	if (allow_extra) {
 		param[0] = 0x71;
 		if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) {
-			atkbd->extra = 1;
+			atkbd->extra = true;
 			return 2;
 		}
 	}
 
+	if (atkbd_terminal) {
+		ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB);
+		return 3;
+	}
+
 	if (target_set != 3)
 		return 2;
 
@@ -765,13 +847,13 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 	return 3;
 }
 
-static int atkbd_activate(struct atkbd *atkbd)
+static int atkbd_reset_state(struct atkbd *atkbd)
 {
-	struct ps2dev *ps2dev = &atkbd->ps2dev;
+        struct ps2dev *ps2dev = &atkbd->ps2dev;
 	unsigned char param[1];
 
 /*
- * Set the LEDs to a defined state.
+ * Set the LEDs to a predefined state (all off).
  */
 
 	param[0] = 0;
@@ -786,16 +868,6 @@ static int atkbd_activate(struct atkbd *atkbd)
 	if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
 		return -1;
 
-/*
- * Enable the keyboard to receive keystrokes.
- */
-
-	if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
-		printk(KERN_ERR "atkbd.c: Failed to enable keyboard on %s\n",
-			ps2dev->serio->phys);
-		return -1;
-	}
-
 	return 0;
 }
 
@@ -807,7 +879,9 @@ static int atkbd_activate(struct atkbd *atkbd)
 static void atkbd_cleanup(struct serio *serio)
 {
 	struct atkbd *atkbd = serio_get_drvdata(serio);
-	ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
+
+	atkbd_disable(atkbd);
+	ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF);
 }
 
 
@@ -819,33 +893,105 @@ static void atkbd_disconnect(struct serio *serio)
 {
 	struct atkbd *atkbd = serio_get_drvdata(serio);
 
-	atkbd_disable(atkbd);
+	sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
 
-	/* make sure we don't have a command in flight */
-	flush_scheduled_work();
+	atkbd_disable(atkbd);
 
-	sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
 	input_unregister_device(atkbd->dev);
+
+	/*
+	 * Make sure we don't have a command in flight.
+	 * Note that since atkbd->enabled is false event work will keep
+	 * rescheduling itself until it gets canceled and will not try
+	 * accessing freed input device or serio port.
+	 */
+	cancel_delayed_work_sync(&atkbd->event_work);
+
 	serio_close(serio);
 	serio_set_drvdata(serio, NULL);
 	kfree(atkbd);
 }
 
 /*
- * Most special keys (Fn+F?) on Dell Latitudes do not generate release
- * events so we have to do it ourselves.
+ * generate release events for the keycodes given in data
  */
-static void atkbd_latitude_keymap_fixup(struct atkbd *atkbd)
+static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd,
+						const void *data)
 {
-	const unsigned int forced_release_keys[] = {
-		0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93,
-	};
-	int i;
+	const unsigned int *keys = data;
+	unsigned int i;
 
 	if (atkbd->set == 2)
-		for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
-			__set_bit(forced_release_keys[i],
-				  atkbd->force_release_mask);
+		for (i = 0; keys[i] != -1U; i++)
+			__set_bit(keys[i], atkbd->force_release_mask);
+}
+
+/*
+ * Most special keys (Fn+F?) on Dell laptops do not generate release
+ * events so we have to do it ourselves.
+ */
+static unsigned int atkbd_dell_laptop_forced_release_keys[] = {
+	0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U
+};
+
+/*
+ * Perform fixup for HP system that doesn't generate release
+ * for its video switch
+ */
+static unsigned int atkbd_hp_forced_release_keys[] = {
+	0x94, -1U
+};
+
+/*
+ * Samsung NC10,NC20 with Fn+F? key release not working
+ */
+static unsigned int atkbd_samsung_forced_release_keys[] = {
+	0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
+};
+
+/*
+ * Amilo Pi 3525 key release for Fn+Volume keys not working
+ */
+static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
+	0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U
+};
+
+/*
+ * Amilo Xi 3650 key release for light touch bar not working
+ */
+static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
+	0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
+};
+
+/*
+ * Soltech TA12 system with broken key release on volume keys and mute key
+ */
+static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
+	0xa0, 0xae, 0xb0, -1U
+};
+
+/*
+ * Many notebooks don't send key release event for volume up/down
+ * keys, with key list below common among them
+ */
+static unsigned int atkbd_volume_forced_release_keys[] = {
+	0xae, 0xb0, -1U
+};
+
+/*
+ * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas
+ * they should be generating e4-e6 (0x80 | code).
+ */
+static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
+						    unsigned int code)
+{
+	if (atkbd->translated && atkbd->emul == 1 &&
+	    (code == 0x64 || code == 0x65 || code == 0x66)) {
+		atkbd->emul = 0;
+		code |= 0x80;
+	}
+
+	return code;
 }
 
 /*
@@ -859,7 +1005,7 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd)
 	int i, j;
 
 	memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
-	bitmap_zero(atkbd->force_release_mask, 512);
+	bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE);
 
 	if (atkbd->translated) {
 		for (i = 0; i < 128; i++) {
@@ -899,7 +1045,7 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd)
  * Perform additional fixups
  */
 	if (atkbd_platform_fixup)
-		atkbd_platform_fixup(atkbd);
+		atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data);
 }
 
 /*
@@ -959,16 +1105,20 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd)
 		input_dev->evbit[0] |= BIT_MASK(EV_REL);
 		input_dev->relbit[0] = BIT_MASK(REL_WHEEL) |
 			BIT_MASK(REL_HWHEEL);
-		set_bit(BTN_MIDDLE, input_dev->keybit);
+		__set_bit(BTN_MIDDLE, input_dev->keybit);
 	}
 
 	input_dev->keycode = atkbd->keycode;
-	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodesize = sizeof(unsigned short);
 	input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
 
-	for (i = 0; i < 512; i++)
-		if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
-			set_bit(atkbd->keycode[i], input_dev->keybit);
+	for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) {
+		if (atkbd->keycode[i] != KEY_RESERVED &&
+		    atkbd->keycode[i] != ATKBD_KEY_NULL &&
+		    atkbd->keycode[i] < ATKBD_SPECIAL) {
+			__set_bit(atkbd->keycode[i], input_dev->keybit);
+		}
+	}
 }
 
 /*
@@ -992,16 +1142,18 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 	atkbd->dev = dev;
 	ps2_init(&atkbd->ps2dev, serio);
 	INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
-	mutex_init(&atkbd->event_mutex);
+	mutex_init(&atkbd->mutex);
 
 	switch (serio->id.type) {
 
-		case SERIO_8042_XL:
-			atkbd->translated = 1;
-		case SERIO_8042:
-			if (serio->write)
-				atkbd->write = 1;
-			break;
+	case SERIO_8042_XL:
+		atkbd->translated = true;
+		/* Fall through */
+
+	case SERIO_8042:
+		if (serio->write)
+			atkbd->write = true;
+		break;
 	}
 
 	atkbd->softraw = atkbd_softraw;
@@ -1009,7 +1161,7 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 	atkbd->scroll = atkbd_scroll;
 
 	if (atkbd->softrepeat)
-		atkbd->softraw = 1;
+		atkbd->softraw = true;
 
 	serio_set_drvdata(serio, atkbd);
 
@@ -1025,7 +1177,7 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 		}
 
 		atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
-		atkbd_activate(atkbd);
+		atkbd_reset_state(atkbd);
 
 	} else {
 		atkbd->set = 2;
@@ -1040,6 +1192,8 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 		goto fail3;
 
 	atkbd_enable(atkbd);
+	if (serio->write)
+		atkbd_activate(atkbd);
 
 	err = input_register_device(atkbd->dev);
 	if (err)
@@ -1064,34 +1218,54 @@ static int atkbd_reconnect(struct serio *serio)
 {
 	struct atkbd *atkbd = serio_get_drvdata(serio);
 	struct serio_driver *drv = serio->drv;
+	int retval = -1;
 
 	if (!atkbd || !drv) {
-		printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
+		dev_dbg(&serio->dev,
+			"reconnect request, but serio is disconnected, ignoring...\n");
 		return -1;
 	}
 
+	mutex_lock(&atkbd->mutex);
+
 	atkbd_disable(atkbd);
 
 	if (atkbd->write) {
 		if (atkbd_probe(atkbd))
-			return -1;
-		if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
-			return -1;
+			goto out;
 
-		atkbd_activate(atkbd);
+		if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
+			goto out;
 
-/*
- * Restore repeat rate and LEDs (that were reset by atkbd_activate)
- * to pre-resume state
- */
+		/*
+		 * Restore LED state and repeat rate. While input core
+		 * will do this for us at resume time reconnect may happen
+		 * because user requested it via sysfs or simply because
+		 * keyboard was unplugged and plugged in again so we need
+		 * to do it ourselves here.
+		 */
+		atkbd_set_leds(atkbd);
 		if (!atkbd->softrepeat)
 			atkbd_set_repeat_rate(atkbd);
-		atkbd_set_leds(atkbd);
+
 	}
 
+	/*
+	 * Reset our state machine in case reconnect happened in the middle
+	 * of multi-byte scancode.
+	 */
+	atkbd->xl_bit = 0;
+	atkbd->emul = 0;
+
 	atkbd_enable(atkbd);
+	if (atkbd->write)
+		atkbd_activate(atkbd);
 
-	return 0;
+	retval = 0;
+
+ out:
+	mutex_unlock(&atkbd->mutex);
+	return retval;
 }
 
 static struct serio_device_id atkbd_serio_ids[] = {
@@ -1135,47 +1309,28 @@ static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
 				ssize_t (*handler)(struct atkbd *, char *))
 {
 	struct serio *serio = to_serio_port(dev);
-	int retval;
-
-	retval = serio_pin_driver(serio);
-	if (retval)
-		return retval;
-
-	if (serio->drv != &atkbd_drv) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	retval = handler((struct atkbd *)serio_get_drvdata(serio), buf);
+	struct atkbd *atkbd = serio_get_drvdata(serio);
 
-out:
-	serio_unpin_driver(serio);
-	return retval;
+	return handler(atkbd, buf);
 }
 
 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
 				ssize_t (*handler)(struct atkbd *, const char *, size_t))
 {
 	struct serio *serio = to_serio_port(dev);
-	struct atkbd *atkbd;
+	struct atkbd *atkbd = serio_get_drvdata(serio);
 	int retval;
 
-	retval = serio_pin_driver(serio);
+	retval = mutex_lock_interruptible(&atkbd->mutex);
 	if (retval)
 		return retval;
 
-	if (serio->drv != &atkbd_drv) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	atkbd = serio_get_drvdata(serio);
 	atkbd_disable(atkbd);
 	retval = handler(atkbd, buf, count);
 	atkbd_enable(atkbd);
 
-out:
-	serio_unpin_driver(serio);
+	mutex_unlock(&atkbd->mutex);
+
 	return retval;
 }
 
@@ -1187,16 +1342,19 @@ static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf)
 static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
 {
 	struct input_dev *old_dev, *new_dev;
-	unsigned long value;
-	char *rest;
+	unsigned int value;
 	int err;
-	unsigned char old_extra, old_set;
+	bool old_extra;
+	unsigned char old_set;
 
 	if (!atkbd->write)
 		return -EIO;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest || value > 1)
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
+
+	if (value > 1)
 		return -EINVAL;
 
 	if (atkbd->extra != value) {
@@ -1215,6 +1373,7 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun
 
 		atkbd->dev = new_dev;
 		atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
+		atkbd_reset_state(atkbd);
 		atkbd_activate(atkbd);
 		atkbd_set_keycode_table(atkbd);
 		atkbd_set_device_attrs(atkbd);
@@ -1236,6 +1395,33 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun
 	return count;
 }
 
+static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf)
+{
+	size_t len = bitmap_scnlistprintf(buf, PAGE_SIZE - 2,
+			atkbd->force_release_mask, ATKBD_KEYMAP_SIZE);
+
+	buf[len++] = '\n';
+	buf[len] = '\0';
+
+	return len;
+}
+
+static ssize_t atkbd_set_force_release(struct atkbd *atkbd,
+					const char *buf, size_t count)
+{
+	/* 64 bytes on stack should be acceptable */
+	DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE);
+	int err;
+
+	err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE);
+	if (err)
+		return err;
+
+	memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask));
+	return count;
+}
+
+
 static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf)
 {
 	return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0);
@@ -1244,13 +1430,15 @@ static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf)
 static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
 {
 	struct input_dev *old_dev, *new_dev;
-	unsigned long value;
-	char *rest;
+	unsigned int value;
 	int err;
-	unsigned char old_scroll;
+	bool old_scroll;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest || value > 1)
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
+
+	if (value > 1)
 		return -EINVAL;
 
 	if (atkbd->scroll != value) {
@@ -1290,16 +1478,19 @@ static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf)
 static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
 {
 	struct input_dev *old_dev, *new_dev;
-	unsigned long value;
-	char *rest;
+	unsigned int value;
 	int err;
-	unsigned char old_set, old_extra;
+	unsigned char old_set;
+	bool old_extra;
 
 	if (!atkbd->write)
 		return -EIO;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest || (value != 2 && value != 3))
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
+
+	if (value != 2 && value != 3)
 		return -EINVAL;
 
 	if (atkbd->set != value) {
@@ -1313,6 +1504,7 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
 
 		atkbd->dev = new_dev;
 		atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
+		atkbd_reset_state(atkbd);
 		atkbd_activate(atkbd);
 		atkbd_set_keycode_table(atkbd);
 		atkbd_set_device_attrs(atkbd);
@@ -1341,16 +1533,18 @@ static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf)
 static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
 {
 	struct input_dev *old_dev, *new_dev;
-	unsigned long value;
-	char *rest;
+	unsigned int value;
 	int err;
-	unsigned char old_softrepeat, old_softraw;
+	bool old_softrepeat, old_softraw;
 
 	if (!atkbd->write)
 		return -EIO;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest || value > 1)
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
+
+	if (value > 1)
 		return -EINVAL;
 
 	if (atkbd->softrepeat != value) {
@@ -1365,7 +1559,7 @@ static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t
 		atkbd->dev = new_dev;
 		atkbd->softrepeat = value;
 		if (atkbd->softrepeat)
-			atkbd->softraw = 1;
+			atkbd->softraw = true;
 		atkbd_set_device_attrs(atkbd);
 
 		err = input_register_device(atkbd->dev);
@@ -1393,13 +1587,15 @@ static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf)
 static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
 {
 	struct input_dev *old_dev, *new_dev;
-	unsigned long value;
-	char *rest;
+	unsigned int value;
 	int err;
-	unsigned char old_softraw;
+	bool old_softraw;
+
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
 
-	value = simple_strtoul(buf, &rest, 10);
-	if (*rest || value > 1)
+	if (value > 1)
 		return -EINVAL;
 
 	if (atkbd->softraw != value) {
@@ -1434,21 +1630,177 @@ static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf)
 	return sprintf(buf, "%lu\n", atkbd->err_count);
 }
 
-static int __init atkbd_setup_fixup(const struct dmi_system_id *id)
+static int __init atkbd_setup_forced_release(const struct dmi_system_id *id)
 {
-	atkbd_platform_fixup = id->driver_data;
-	return 0;
+	atkbd_platform_fixup = atkbd_apply_forced_release_keylist;
+	atkbd_platform_fixup_data = id->driver_data;
+
+	return 1;
+}
+
+static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
+{
+	atkbd_platform_scancode_fixup = id->driver_data;
+
+	return 1;
 }
 
-static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
+static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id)
+{
+	atkbd_skip_deactivate = true;
+	return 1;
+}
+
+static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
 	{
-		.ident = "Dell Latitude series",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_dell_laptop_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_dell_laptop_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_hp_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		/* Inventec Symphony */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		/* Samsung NC10 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
+		/* Samsung NC20 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
+		/* Samsung SQ45S70S */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
+		/* Fujitsu Amilo PA 1510 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		/* Fujitsu Amilo Pi 3525 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_amilo_pi3525_forced_release_keys,
+	},
+	{
+		/* Fujitsu Amilo Xi 3650 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_amilo_xi3650_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkdb_soltech_ta12_forced_release_keys,
+	},
+	{
+		/* OQO Model 01+ */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
+		},
+		.callback = atkbd_setup_scancode_fixup,
+		.driver_data = atkbd_oqo_01plus_scancode_fixup,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LW25-B7HV"),
+		},
+		.callback = atkbd_deactivate_fixup,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P1-J273B"),
 		},
-		.callback = atkbd_setup_fixup,
-		.driver_data = atkbd_latitude_keymap_fixup,
+		.callback = atkbd_deactivate_fixup,
 	},
 	{ }
 };