diff options
Diffstat (limited to 'drivers/input/keyboard/atkbd.c')
| -rw-r--r-- | drivers/input/keyboard/atkbd.c | 159 |
1 files changed, 123 insertions, 36 deletions
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index d358ef8623f..2dd1d0dd4f7 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -63,6 +63,10 @@ static bool atkbd_extra; module_param_named(extra, atkbd_extra, bool, 0); MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); +static bool atkbd_terminal; +module_param_named(terminal, atkbd_terminal, bool, 0); +MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2"); + /* * Scancode to keycode tables. These are just the default setting, and * are loadable via a userland utility. @@ -136,7 +140,8 @@ static const unsigned short atkbd_unxlate_table[128] = { #define ATKBD_CMD_ENABLE 0x00f4 #define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ #define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ -#define ATKBD_CMD_SETALL_MBR 0x00fa +#define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */ +#define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */ #define ATKBD_CMD_RESET_BAT 0x02ff #define ATKBD_CMD_RESEND 0x00fe #define ATKBD_CMD_EX_ENABLE 0x10ea @@ -238,6 +243,12 @@ static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); static void *atkbd_platform_fixup_data; static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); +/* + * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding + * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed. + */ +static bool atkbd_skip_deactivate; + static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)); static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, @@ -428,7 +439,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, if (printk_ratelimit()) dev_warn(&serio->dev, "Spurious %s on %s. " - "Some program might be trying access hardware directly.\n", + "Some program might be trying to access hardware directly.\n", data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); goto out; case ATKBD_RET_ERR: @@ -671,6 +682,39 @@ static inline void atkbd_disable(struct atkbd *atkbd) serio_continue_rx(atkbd->ps2dev.serio); } +static int atkbd_activate(struct atkbd *atkbd) +{ + struct ps2dev *ps2dev = &atkbd->ps2dev; + +/* + * Enable the keyboard to receive keystrokes. + */ + + if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) { + dev_err(&ps2dev->serio->dev, + "Failed to enable keyboard on %s\n", + ps2dev->serio->phys); + return -1; + } + + return 0; +} + +/* + * atkbd_deactivate() resets and disables the keyboard from sending + * keystrokes. + */ + +static void atkbd_deactivate(struct atkbd *atkbd) +{ + struct ps2dev *ps2dev = &atkbd->ps2dev; + + if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS)) + dev_err(&ps2dev->serio->dev, + "Failed to deactivate keyboard on %s\n", + ps2dev->serio->phys); +} + /* * atkbd_probe() probes for an AT keyboard on a serio port. */ @@ -721,11 +765,18 @@ static int atkbd_probe(struct atkbd *atkbd) if (atkbd->id == 0xaca1 && atkbd->translated) { dev_err(&ps2dev->serio->dev, - "NCD terminal keyboards are only supported on non-translating controlelrs. " + "NCD terminal keyboards are only supported on non-translating controllers. " "Use i8042.direct=1 to disable translation.\n"); return -1; } +/* + * Make sure nothing is coming from the keyboard and disturbs our + * internal state. + */ + if (!atkbd_skip_deactivate) + atkbd_deactivate(atkbd); + return 0; } @@ -764,6 +815,11 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra } } + if (atkbd_terminal) { + ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB); + return 3; + } + if (target_set != 3) return 2; @@ -815,24 +871,6 @@ static int atkbd_reset_state(struct atkbd *atkbd) return 0; } -static int atkbd_activate(struct atkbd *atkbd) -{ - struct ps2dev *ps2dev = &atkbd->ps2dev; - -/* - * Enable the keyboard to receive keystrokes. - */ - - if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) { - dev_err(&ps2dev->serio->dev, - "Failed to enable keyboard on %s\n", - ps2dev->serio->phys); - return -1; - } - - return 0; -} - /* * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a * reboot. @@ -1140,7 +1178,6 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra); atkbd_reset_state(atkbd); - atkbd_activate(atkbd); } else { atkbd->set = 2; @@ -1155,6 +1192,8 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) goto fail3; atkbd_enable(atkbd); + if (serio->write) + atkbd_activate(atkbd); err = input_register_device(atkbd->dev); if (err) @@ -1198,8 +1237,6 @@ static int atkbd_reconnect(struct serio *serio) if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra)) goto out; - atkbd_activate(atkbd); - /* * Restore LED state and repeat rate. While input core * will do this for us at resume time reconnect may happen @@ -1213,7 +1250,17 @@ static int atkbd_reconnect(struct serio *serio) } + /* + * Reset our state machine in case reconnect happened in the middle + * of multi-byte scancode. + */ + atkbd->xl_bit = 0; + atkbd->emul = 0; + atkbd_enable(atkbd); + if (atkbd->write) + atkbd_activate(atkbd); + retval = 0; out: @@ -1295,7 +1342,7 @@ static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; bool old_extra; unsigned char old_set; @@ -1303,7 +1350,11 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun if (!atkbd->write) return -EIO; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (atkbd->extra != value) { @@ -1379,11 +1430,15 @@ static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; bool old_scroll; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (atkbd->scroll != value) { @@ -1423,7 +1478,7 @@ static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; unsigned char old_set; bool old_extra; @@ -1431,7 +1486,11 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) if (!atkbd->write) return -EIO; - if (strict_strtoul(buf, 10, &value) || (value != 2 && value != 3)) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value != 2 && value != 3) return -EINVAL; if (atkbd->set != value) { @@ -1474,14 +1533,18 @@ static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; bool old_softrepeat, old_softraw; if (!atkbd->write) return -EIO; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (atkbd->softrepeat != value) { @@ -1524,11 +1587,15 @@ static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; bool old_softraw; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (atkbd->softraw != value) { @@ -1568,14 +1635,20 @@ static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) atkbd_platform_fixup = atkbd_apply_forced_release_keylist; atkbd_platform_fixup_data = id->driver_data; - return 0; + return 1; } static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) { atkbd_platform_scancode_fixup = id->driver_data; - return 0; + return 1; +} + +static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id) +{ + atkbd_skip_deactivate = true; + return 1; } static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { @@ -1715,6 +1788,20 @@ static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { .callback = atkbd_setup_scancode_fixup, .driver_data = atkbd_oqo_01plus_scancode_fixup, }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), + DMI_MATCH(DMI_PRODUCT_NAME, "LW25-B7HV"), + }, + .callback = atkbd_deactivate_fixup, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), + DMI_MATCH(DMI_PRODUCT_NAME, "P1-J273B"), + }, + .callback = atkbd_deactivate_fixup, + }, { } }; |