diff options
Diffstat (limited to 'drivers/input/keyboard/Kconfig')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 185 |
1 files changed, 160 insertions, 25 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b16bed038f7..f7e79b48134 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -2,7 +2,7 @@ # Input core configuration # menuconfig INPUT_KEYBOARD - bool "Keyboards" if EXPERT || !X86 + bool "Keyboards" default y help Say Y here, and a list of supported keyboards will be displayed. @@ -32,6 +32,16 @@ config KEYBOARD_ADP5588 To compile this driver as a module, choose M here: the module will be called adp5588-keys. +config KEYBOARD_ADP5589 + tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander" + depends on I2C + help + Say Y here if you want to use a ADP5585/ADP5589 attached to your + system I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adp5589-keys. + config KEYBOARD_AMIGA tristate "Amiga keyboard" depends on AMIGA @@ -57,11 +67,11 @@ config KEYBOARD_ATARI module will be called atakbd. config KEYBOARD_ATKBD - tristate "AT keyboard" if EXPERT || !X86 + tristate "AT keyboard" default y select SERIO select SERIO_LIBPS2 - select SERIO_I8042 if X86 + select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO select SERIO_GSCPS2 if GSC help Say Y here if you want to use a standard AT or PS/2 keyboard. Usually @@ -124,7 +134,7 @@ config KEYBOARD_QT1070 config KEYBOARD_QT2160 tristate "Atmel AT42QT2160 Touch Sensor Chip" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Atmel AT42QT2160 Touch Sensor chip as a keyboard input. @@ -141,6 +151,18 @@ config KEYBOARD_BFIN To compile this driver as a module, choose M here: the module will be called bf54x-keys. +config KEYBOARD_CLPS711X + tristate "CLPS711X Keypad support" + depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST) + select INPUT_MATRIXKMAP + select INPUT_POLLDEV + help + Say Y here to enable the matrix keypad on the Cirrus Logic + CLPS711X CPUs. + + To compile this driver as a module, choose M here: the + module will be called clps711x-keypad. + config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" select SERIO @@ -156,6 +178,7 @@ config KEYBOARD_LKKBD config KEYBOARD_EP93XX tristate "EP93xx Matrix Keypad support" depends on ARCH_EP93XX + select INPUT_MATRIXKMAP help Say Y here to enable the matrix keypad on the Cirrus EP93XX. @@ -164,7 +187,7 @@ config KEYBOARD_EP93XX config KEYBOARD_GPIO tristate "GPIO Buttons" - depends on GENERIC_GPIO + depends on GPIOLIB help This driver implements support for buttons connected to GPIO pins of various CPUs (and some other chips). @@ -179,7 +202,7 @@ config KEYBOARD_GPIO config KEYBOARD_GPIO_POLLED tristate "Polled GPIO buttons" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help This driver implements support for buttons connected @@ -211,9 +234,27 @@ config KEYBOARD_TCA6416 To compile this driver as a module, choose M here: the module will be called tca6416_keypad. +config KEYBOARD_TCA8418 + tristate "TCA8418 Keypad Support" + depends on I2C + select INPUT_MATRIXKMAP + help + This driver implements basic keypad functionality + for keys connected through TCA8418 keypad decoder. + + Say Y here if your device has keys connected to + TCA8418 keypad decoder. + + If enabled the complete TCA8418 device will be managed through + this driver. + + To compile this driver as a module, choose M here: the + module will be called tca8418_keypad. + config KEYBOARD_MATRIX tristate "GPIO driven matrix keypad support" - depends on GENERIC_GPIO + depends on GPIOLIB + select INPUT_MATRIXKMAP help Enable support for GPIO driven matrix keypad. @@ -283,6 +324,17 @@ config KEYBOARD_LM8323 To compile this driver as a module, choose M here: the module will be called lm8323. +config KEYBOARD_LM8333 + tristate "LM8333 keypad chip" + depends on I2C + select INPUT_MATRIXKMAP + help + If you say yes here you get support for the National Semiconductor + LM8333 keypad controller. + + To compile this driver as a module, choose M here: the + module will be called lm8333. + config KEYBOARD_LOCOMO tristate "LoCoMo Keyboard Support" depends on SHARP_LOCOMO @@ -292,6 +344,17 @@ config KEYBOARD_LOCOMO To compile this driver as a module, choose M here: the module will be called locomokbd. +config KEYBOARD_LPC32XX + tristate "LPC32XX matrix key scanner support" + depends on ARCH_LPC32XX && OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use NXP LPC32XX SoC key scanner interface, + connected to a key matrix. + + To compile this driver as a module, choose M here: the + module will be called lpc32xx-keys. + config KEYBOARD_MAPLE tristate "Maple bus keyboard" depends on SH_DREAMCAST && MAPLE @@ -325,9 +388,22 @@ config KEYBOARD_MCS To compile this driver as a module, choose M here: the module will be called mcs_touchkey. +config KEYBOARD_MPR121 + tristate "Freescale MPR121 Touchkey" + depends on I2C + help + Say Y here if you have Freescale MPR121 touchkey controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mpr121_touchkey. + config KEYBOARD_IMX tristate "IMX keypad support" depends on ARCH_MXC + select INPUT_MATRIXKMAP help Enable support for IMX keypad port. @@ -345,7 +421,8 @@ config KEYBOARD_NEWTON config KEYBOARD_NOMADIK tristate "ST-Ericsson Nomadik SKE keyboard" - depends on PLAT_NOMADIK + depends on (ARCH_NOMADIK || ARCH_U8500) + select INPUT_MATRIXKMAP help Say Y here if you want to use a keypad provided on the SKE controller used on the Ux500 and Nomadik platforms @@ -353,9 +430,20 @@ config KEYBOARD_NOMADIK To compile this driver as a module, choose M here: the module will be called nmk-ske-keypad. +config KEYBOARD_NSPIRE + tristate "TI-NSPIRE built-in keyboard" + depends on ARCH_NSPIRE && OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the built-in keypad on TI-NSPIRE. + + To compile this driver as a module, choose M here: the + module will be called nspire-keypad. + config KEYBOARD_TEGRA tristate "NVIDIA Tegra internal matrix keyboard controller support" - depends on ARCH_TEGRA + depends on ARCH_TEGRA && OF + select INPUT_MATRIXKMAP help Say Y here if you want to use a matrix keyboard connected directly to the internal keyboard controller on Tegra SoCs. @@ -365,6 +453,7 @@ config KEYBOARD_TEGRA config KEYBOARD_OPENCORES tristate "OpenCores Keyboard Controller" + depends on HAS_IOMEM help Say Y here if you want to use the OpenCores Keyboard Controller http://www.opencores.org/project,keyboardcontroller @@ -375,6 +464,7 @@ config KEYBOARD_OPENCORES config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx || ARCH_MMP + select INPUT_MATRIXKMAP help Enable support for PXA27x/PXA3xx keypad controller. @@ -390,15 +480,39 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. +config KEYBOARD_PMIC8XXX + tristate "Qualcomm PMIC8XXX keypad support" + depends on MFD_PM8XXX + select INPUT_MATRIXKMAP + help + Say Y here if you want to enable the driver for the PMIC8XXX + keypad provided as a reference design from Qualcomm. This is intended + to support upto 18x8 matrix based keypad design. + + To compile this driver as a module, choose M here: the module will + be called pmic8xxx-keypad. + config KEYBOARD_SAMSUNG tristate "Samsung keypad support" - depends on SAMSUNG_DEV_KEYPAD + depends on HAVE_CLK + select INPUT_MATRIXKMAP help - Say Y here if you want to use the Samsung keypad. + Say Y here if you want to use the keypad on your Samsung mobile + device. To compile this driver as a module, choose M here: the module will be called samsung-keypad. +config KEYBOARD_GOLDFISH_EVENTS + depends on GOLDFISH + tristate "Generic Input Event device for Goldfish" + help + Say Y here to get an input event device for the Goldfish virtual + device emulator. + + To compile this driver as a module, choose M here: the + module will be called goldfish-events. + config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO @@ -410,6 +524,17 @@ config KEYBOARD_STOWAWAY To compile this driver as a module, choose M here: the module will be called stowaway. +config KEYBOARD_ST_KEYSCAN + tristate "STMicroelectronics keyscan support" + depends on ARCH_STI || COMPILE_TEST + select INPUT_MATRIXKMAP + help + Say Y here if you want to use a keypad attached to the keyscan block + on some STMicroelectronics SoC devices. + + To compile this driver as a module, choose M here: the + module will be called st-keyscan. + config KEYBOARD_SUNKBD tristate "Sun Type 4 and Type 5 keyboard" select SERIO @@ -423,7 +548,7 @@ config KEYBOARD_SUNKBD config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" - depends on SUPERH || ARCH_SHMOBILE + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST help Say Y here if you want to use a keypad attached to the KEYSC block on SuperH processors such as sh7722 and sh7343. @@ -434,6 +559,7 @@ config KEYBOARD_SH_KEYSC config KEYBOARD_STMPE tristate "STMPE keypad support" depends on MFD_STMPE + select INPUT_MATRIXKMAP help Say Y here if you want to use the keypad controller on STMPE I/O expanders. @@ -453,7 +579,8 @@ config KEYBOARD_DAVINCI config KEYBOARD_OMAP tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) + depends on ARCH_OMAP1 + select INPUT_MATRIXKMAP help Say Y here if you want to use the OMAP keypad. @@ -461,10 +588,11 @@ config KEYBOARD_OMAP module will be called omap-keypad. config KEYBOARD_OMAP4 - tristate "TI OMAP4 keypad support" - depends on ARCH_OMAP4 + tristate "TI OMAP4+ keypad support" + depends on OF || ARCH_OMAP2PLUS + select INPUT_MATRIXKMAP help - Say Y here if you want to use the OMAP4 keypad. + Say Y here if you want to use the OMAP4+ keypad. To compile this driver as a module, choose M here: the module will be called omap4-keypad. @@ -472,6 +600,7 @@ config KEYBOARD_OMAP4 config KEYBOARD_SPEAR tristate "ST SPEAR keyboard support" depends on PLAT_SPEAR + select INPUT_MATRIXKMAP help Say Y here if you want to use the SPEAR keyboard. @@ -481,6 +610,7 @@ config KEYBOARD_SPEAR config KEYBOARD_TC3589X tristate "TC3589X Keypad support" depends on MFD_TC3589X + select INPUT_MATRIXKMAP help Say Y here if you want to use the keypad controller on TC35892/3 I/O expander. @@ -488,18 +618,10 @@ config KEYBOARD_TC3589X To compile this driver as a module, choose M here: the module will be called tc3589x-keypad. -config KEYBOARD_TNETV107X - tristate "TI TNETV107X keypad support" - depends on ARCH_DAVINCI_TNETV107X - help - Say Y here if you want to use the TNETV107X keypad. - - To compile this driver as a module, choose M here: the - module will be called tnetv107x-keypad. - config KEYBOARD_TWL4030 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" depends on TWL4030_CORE + select INPUT_MATRIXKMAP help Say Y here if your board use the keypad controller on TWL4030 family chips. It's safe to say enable this @@ -523,6 +645,7 @@ config KEYBOARD_XTKBD config KEYBOARD_W90P910 tristate "W90P910 Matrix Keypad support" depends on ARCH_W90X900 + select INPUT_MATRIXKMAP help Say Y here to enable the matrix keypad on evaluation board based on W90P910. @@ -530,4 +653,16 @@ config KEYBOARD_W90P910 To compile this driver as a module, choose M here: the module will be called w90p910_keypad. +config KEYBOARD_CROS_EC + tristate "ChromeOS EC keyboard" + select INPUT_MATRIXKMAP + depends on MFD_CROS_EC + help + Say Y here to enable the matrix keyboard used by ChromeOS devices + and implemented on the ChromeOS EC. You must enable one bus option + (MFD_CROS_EC_I2C or MFD_CROS_EC_SPI) to use this. + + To compile this driver as a module, choose M here: the + module will be called cros_ec_keyb. + endif |