diff options
Diffstat (limited to 'drivers/input/joystick')
36 files changed, 2262 insertions, 891 deletions
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 7c662ee594a..56eb471b557 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -193,6 +193,18 @@ config JOYSTICK_TWIDJOY To compile this driver as a module, choose M here: the module will be called twidjoy. +config JOYSTICK_ZHENHUA + tristate "5-byte Zhenhua RC transmitter" + select SERIO + help + Say Y here if you have a Zhen Hua PPM-4CH transmitter which is + supplied with a ready to fly micro electric indoor helicopters + such as EasyCopter, Lama, MiniCopter, DragonFly or Jabo and want + to use it via serial cable as a joystick. + + To compile this driver as a module, choose M here: the + module will be called zhenhua. + config JOYSTICK_DB9 tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" depends on PARPORT @@ -209,6 +221,7 @@ config JOYSTICK_DB9 config JOYSTICK_GAMECON tristate "Multisystem, NES, SNES, N64, PSX joysticks and gamepads" depends on PARPORT + select INPUT_FF_MEMLESS ---help--- Say Y here if you have a Nintendo Entertainment System gamepad, Super Nintendo Entertainment System gamepad, Nintendo 64 gamepad, @@ -242,6 +255,16 @@ config JOYSTICK_AMIGA To compile this driver as a module, choose M here: the module will be called amijoy. +config JOYSTICK_AS5011 + tristate "Austria Microsystem AS5011 joystick" + depends on I2C + help + Say Y here if you have an AS5011 digital joystick connected to your + system. + + To compile this driver as a module, choose M here: the + module will be called as5011. + config JOYSTICK_JOYDUMP tristate "Gameport data dumper" select GAMEPORT @@ -282,4 +305,28 @@ config JOYSTICK_XPAD_LEDS This option enables support for the LED which surrounds the Big X on XBox 360 controller. +config JOYSTICK_WALKERA0701 + tristate "Walkera WK-0701 RC transmitter" + depends on HIGH_RES_TIMERS && PARPORT + help + Say Y or M here if you have a Walkera WK-0701 transmitter which is + supplied with a ready to fly Walkera helicopters such as HM36, + HM37, HM60 and want to use it via parport as a joystick. More + information is available: <file:Documentation/input/walkera0701.txt> + + To compile this driver as a module, choose M here: the + module will be called walkera0701. + +config JOYSTICK_MAPLE + tristate "Dreamcast control pad" + depends on MAPLE + help + Say Y here if you have a SEGA Dreamcast and want to use your + controller as a joystick. + + Most Dreamcast users will say Y. + + To compile this as a module choose M here: the module will be called + maplecontrol. + endif diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index e855abb0cc5..92dc0de9dfe 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_JOYSTICK_A3D) += a3d.o obj-$(CONFIG_JOYSTICK_ADI) += adi.o obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o +obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o obj-$(CONFIG_JOYSTICK_ANALOG) += analog.o obj-$(CONFIG_JOYSTICK_COBRA) += cobra.o obj-$(CONFIG_JOYSTICK_DB9) += db9.o @@ -15,9 +16,11 @@ obj-$(CONFIG_JOYSTICK_GF2K) += gf2k.o obj-$(CONFIG_JOYSTICK_GRIP) += grip.o obj-$(CONFIG_JOYSTICK_GRIP_MP) += grip_mp.o obj-$(CONFIG_JOYSTICK_GUILLEMOT) += guillemot.o +obj-$(CONFIG_JOYSTICK_IFORCE) += iforce/ obj-$(CONFIG_JOYSTICK_INTERACT) += interact.o obj-$(CONFIG_JOYSTICK_JOYDUMP) += joydump.o obj-$(CONFIG_JOYSTICK_MAGELLAN) += magellan.o +obj-$(CONFIG_JOYSTICK_MAPLE) += maplecontrol.o obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o obj-$(CONFIG_JOYSTICK_SPACEORB) += spaceorb.o @@ -27,5 +30,6 @@ obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o +obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o +obj-$(CONFIG_JOYSTICK_WALKERA0701) += walkera0701.o -obj-$(CONFIG_JOYSTICK_IFORCE) += iforce/ diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c index 52ba16f487c..55efdfc7eb6 100644 --- a/drivers/input/joystick/a3d.c +++ b/drivers/input/joystick/a3d.c @@ -1,11 +1,9 @@ /* - * $Id: a3d.c,v 1.21 2002/01/22 20:11:50 vojtech Exp $ - * * Copyright (c) 1998-2001 Vojtech Pavlik */ /* - * FP-Gaming Assasin 3D joystick driver for Linux + * FP-Gaming Assassin 3D joystick driver for Linux */ /* @@ -31,12 +29,11 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> -#include <linux/init.h> #include <linux/gameport.h> #include <linux/input.h> #include <linux/jiffies.h> -#define DRIVER_DESC "FP-Gaming Assasin 3D joystick driver" +#define DRIVER_DESC "FP-Gaming Assassin 3D joystick driver" MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); MODULE_DESCRIPTION(DRIVER_DESC); @@ -344,7 +341,8 @@ static int a3d_connect(struct gameport *gameport, struct gameport_driver *drv) for (i = 0; i < 4; i++) { if (i < 2) - input_set_abs_params(input_dev, axes[i], 48, input_dev->abs[axes[i]] * 2 - 48, 0, 8); + input_set_abs_params(input_dev, axes[i], + 48, input_abs_get_val(input_dev, axes[i]) * 2 - 48, 0, 8); else input_set_abs_params(input_dev, axes[i], 2, 253, 0, 0); input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0); @@ -414,16 +412,4 @@ static struct gameport_driver a3d_drv = { .disconnect = a3d_disconnect, }; -static int __init a3d_init(void) -{ - gameport_register_driver(&a3d_drv); - return 0; -} - -static void __exit a3d_exit(void) -{ - gameport_unregister_driver(&a3d_drv); -} - -module_init(a3d_init); -module_exit(a3d_exit); +module_gameport_driver(a3d_drv); diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c index d1ca8a14950..b78425765d3 100644 --- a/drivers/input/joystick/adi.c +++ b/drivers/input/joystick/adi.c @@ -33,7 +33,6 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/gameport.h> -#include <linux/init.h> #include <linux/jiffies.h> #define DRIVER_DESC "Logitech ADI joystick family driver" @@ -452,7 +451,7 @@ static void adi_init_center(struct adi *adi) for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) { t = adi->abs[i]; - x = adi->dev->abs[t]; + x = input_abs_get_val(adi->dev, t); if (t == ABS_THROTTLE || t == ABS_RUDDER || adi->id == ADI_ID_WGPE) x = i < adi->axes10 ? 512 : 128; @@ -557,10 +556,6 @@ static void adi_disconnect(struct gameport *gameport) kfree(port); } -/* - * The gameport device structure. - */ - static struct gameport_driver adi_drv = { .driver = { .name = "adi", @@ -570,16 +565,4 @@ static struct gameport_driver adi_drv = { .disconnect = adi_disconnect, }; -static int __init adi_init(void) -{ - gameport_register_driver(&adi_drv); - return 0; -} - -static void __exit adi_exit(void) -{ - gameport_unregister_driver(&adi_drv); -} - -module_init(adi_init); -module_exit(adi_exit); +module_gameport_driver(adi_drv); diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c index deb9f825f92..c65b5fa69f1 100644 --- a/drivers/input/joystick/amijoy.c +++ b/drivers/input/joystick/amijoy.c @@ -1,6 +1,4 @@ /* - * $Id: amijoy.c,v 1.13 2002/01/22 20:26:32 vojtech Exp $ - * * Copyright (c) 1998-2001 Vojtech Pavlik */ @@ -37,7 +35,6 @@ #include <linux/interrupt.h> #include <linux/mutex.h> -#include <asm/system.h> #include <asm/amigahw.h> #include <asm/amigaints.h> @@ -110,6 +107,9 @@ static int __init amijoy_init(void) int i, j; int err; + if (!MACH_IS_AMIGA) + return -ENODEV; + for (i = 0; i < 2; i++) { if (!amijoy[i]) continue; @@ -141,8 +141,8 @@ static int __init amijoy_init(void) amijoy_dev[i]->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); for (j = 0; j < 2; j++) { - amijoy_dev[i]->absmin[ABS_X + j] = -1; - amijoy_dev[i]->absmax[ABS_X + j] = 1; + input_set_abs_params(amijoy_dev[i], ABS_X + j, + -1, 1, 0, 0); } err = input_register_device(amijoy_dev[i]); diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 708c5ae13b2..9135606c864 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -35,7 +35,7 @@ #include <linux/input.h> #include <linux/gameport.h> #include <linux/jiffies.h> -#include <asm/timex.h> +#include <linux/timex.h> #define DRIVER_DESC "Analog joystick and gamepad driver" @@ -136,21 +136,21 @@ struct analog_port { #ifdef __i386__ -#include <asm/i8253.h> +#include <linux/i8253.h> #define GET_TIME(x) do { if (cpu_has_tsc) rdtscl(x); else x = get_time_pit(); } while (0) -#define DELTA(x,y) (cpu_has_tsc ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? CLOCK_TICK_RATE / HZ : 0))) +#define DELTA(x,y) (cpu_has_tsc ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? PIT_TICK_RATE / HZ : 0))) #define TIME_NAME (cpu_has_tsc?"TSC":"PIT") static unsigned int get_time_pit(void) { unsigned long flags; unsigned int count; - spin_lock_irqsave(&i8253_lock, flags); + raw_spin_lock_irqsave(&i8253_lock, flags); outb_p(0x00, 0x43); count = inb_p(0x40); count |= inb_p(0x40) << 8; - spin_unlock_irqrestore(&i8253_lock, flags); + raw_spin_unlock_irqrestore(&i8253_lock, flags); return count; } @@ -158,14 +158,10 @@ static unsigned int get_time_pit(void) #define GET_TIME(x) rdtscl(x) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "TSC" -#elif defined(__alpha__) +#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_TILE) #define GET_TIME(x) do { x = get_cycles(); } while (0) #define DELTA(x,y) ((y)-(x)) -#define TIME_NAME "PCC" -#elif defined(CONFIG_MN10300) -#define GET_TIME(x) do { x = get_cycles(); } while (0) -#define DELTA(x, y) ((x) - (y)) -#define TIME_NAME "TSC" +#define TIME_NAME "get_cycles" #else #define FAKE_TIME static unsigned long analog_faketime = 0; @@ -761,9 +757,7 @@ static struct gameport_driver analog_drv = { static int __init analog_init(void) { analog_parse_options(); - gameport_register_driver(&analog_drv); - - return 0; + return gameport_register_driver(&analog_drv); } static void __exit analog_exit(void) diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c new file mode 100644 index 00000000000..005d852a06e --- /dev/null +++ b/drivers/input/joystick/as5011.c @@ -0,0 +1,374 @@ +/* + * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@armadeus.com> + * Sponsored by ARMadeus Systems + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Driver for Austria Microsystems joysticks AS5011 + * + * TODO: + * - Power on the chip when open() and power down when close() + * - Manage power mode + */ + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/input/as5011.h> +#include <linux/slab.h> +#include <linux/module.h> + +#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick" +#define MODULE_DEVICE_ALIAS "as5011" + +MODULE_AUTHOR("Fabien Marteau <fabien.marteau@armadeus.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* registers */ +#define AS5011_CTRL1 0x76 +#define AS5011_CTRL2 0x75 +#define AS5011_XP 0x43 +#define AS5011_XN 0x44 +#define AS5011_YP 0x53 +#define AS5011_YN 0x54 +#define AS5011_X_REG 0x41 +#define AS5011_Y_REG 0x42 +#define AS5011_X_RES_INT 0x51 +#define AS5011_Y_RES_INT 0x52 + +/* CTRL1 bits */ +#define AS5011_CTRL1_LP_PULSED 0x80 +#define AS5011_CTRL1_LP_ACTIVE 0x40 +#define AS5011_CTRL1_LP_CONTINUE 0x20 +#define AS5011_CTRL1_INT_WUP_EN 0x10 +#define AS5011_CTRL1_INT_ACT_EN 0x08 +#define AS5011_CTRL1_EXT_CLK_EN 0x04 +#define AS5011_CTRL1_SOFT_RST 0x02 +#define AS5011_CTRL1_DATA_VALID 0x01 + +/* CTRL2 bits */ +#define AS5011_CTRL2_EXT_SAMPLE_EN 0x08 +#define AS5011_CTRL2_RC_BIAS_ON 0x04 +#define AS5011_CTRL2_INV_SPINNING 0x02 + +#define AS5011_MAX_AXIS 80 +#define AS5011_MIN_AXIS (-80) +#define AS5011_FUZZ 8 +#define AS5011_FLAT 40 + +struct as5011_device { + struct input_dev *input_dev; + struct i2c_client *i2c_client; + unsigned int button_gpio; + unsigned int button_irq; + unsigned int axis_irq; +}; + +static int as5011_i2c_write(struct i2c_client *client, + uint8_t aregaddr, + uint8_t avalue) +{ + uint8_t data[2] = { aregaddr, avalue }; + struct i2c_msg msg = { + .addr = client->addr, + .flags = I2C_M_IGNORE_NAK, + .len = 2, + .buf = (uint8_t *)data + }; + int error; + + error = i2c_transfer(client->adapter, &msg, 1); + return error < 0 ? error : 0; +} + +static int as5011_i2c_read(struct i2c_client *client, + uint8_t aregaddr, signed char *value) +{ + uint8_t data[2] = { aregaddr }; + struct i2c_msg msg_set[2] = { + { + .addr = client->addr, + .flags = I2C_M_REV_DIR_ADDR, + .len = 1, + .buf = (uint8_t *)data + }, + { + .addr = client->addr, + .flags = I2C_M_RD | I2C_M_NOSTART, + .len = 1, + .buf = (uint8_t *)data + } + }; + int error; + + error = i2c_transfer(client->adapter, msg_set, 2); + if (error < 0) + return error; + + *value = data[0] & 0x80 ? -1 * (1 + ~data[0]) : data[0]; + return 0; +} + +static irqreturn_t as5011_button_interrupt(int irq, void *dev_id) +{ + struct as5011_device *as5011 = dev_id; + int val = gpio_get_value_cansleep(as5011->button_gpio); + + input_report_key(as5011->input_dev, BTN_JOYSTICK, !val); + input_sync(as5011->input_dev); + + return IRQ_HANDLED; +} + +static irqreturn_t as5011_axis_interrupt(int irq, void *dev_id) +{ + struct as5011_device *as5011 = dev_id; + int error; + signed char x, y; + + error = as5011_i2c_read(as5011->i2c_client, AS5011_X_RES_INT, &x); + if (error < 0) + goto out; + + error = as5011_i2c_read(as5011->i2c_client, AS5011_Y_RES_INT, &y); + if (error < 0) + goto out; + + input_report_abs(as5011->input_dev, ABS_X, x); + input_report_abs(as5011->input_dev, ABS_Y, y); + input_sync(as5011->input_dev); + +out: + return IRQ_HANDLED; +} + +static int as5011_configure_chip(struct as5011_device *as5011, + const struct as5011_platform_data *plat_dat) +{ + struct i2c_client *client = as5011->i2c_client; + int error; + signed char value; + + /* chip soft reset */ + error = as5011_i2c_write(client, AS5011_CTRL1, + AS5011_CTRL1_SOFT_RST); + if (error < 0) { + dev_err(&client->dev, "Soft reset failed\n"); + return error; + } + + mdelay(10); + + error = as5011_i2c_write(client, AS5011_CTRL1, + AS5011_CTRL1_LP_PULSED | + AS5011_CTRL1_LP_ACTIVE | + AS5011_CTRL1_INT_ACT_EN); + if (error < 0) { + dev_err(&client->dev, "Power config failed\n"); + return error; + } + + error = as5011_i2c_write(client, AS5011_CTRL2, + AS5011_CTRL2_INV_SPINNING); + if (error < 0) { + dev_err(&client->dev, "Can't invert spinning\n"); + return error; + } + + /* write threshold */ + error = as5011_i2c_write(client, AS5011_XP, plat_dat->xp); + if (error < 0) { + dev_err(&client->dev, "Can't write threshold\n"); + return error; + } + + error = as5011_i2c_write(client, AS5011_XN, plat_dat->xn); + if (error < 0) { + dev_err(&client->dev, "Can't write threshold\n"); + return error; + } + + error = as5011_i2c_write(client, AS5011_YP, plat_dat->yp); + if (error < 0) { + dev_err(&client->dev, "Can't write threshold\n"); + return error; + } + + error = as5011_i2c_write(client, AS5011_YN, plat_dat->yn); + if (error < 0) { + dev_err(&client->dev, "Can't write threshold\n"); + return error; + } + + /* to free irq gpio in chip */ + error = as5011_i2c_read(client, AS5011_X_RES_INT, &value); + if (error < 0) { + dev_err(&client->dev, "Can't read i2c X resolution value\n"); + return error; + } + + return 0; +} + +static int as5011_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct as5011_platform_data *plat_data; + struct as5011_device *as5011; + struct input_dev *input_dev; + int irq; + int error; + + plat_data = dev_get_platdata(&client->dev); + if (!plat_data) + return -EINVAL; + + if (!plat_data->axis_irq) { + dev_err(&client->dev, "No axis IRQ?\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_NOSTART | + I2C_FUNC_PROTOCOL_MANGLING)) { + dev_err(&client->dev, + "need i2c bus that supports protocol mangling\n"); + return -ENODEV; + } + + as5011 = kmalloc(sizeof(struct as5011_device), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!as5011 || !input_dev) { + dev_err(&client->dev, + "Can't allocate memory for device structure\n"); + error = -ENOMEM; + goto err_free_mem; + } + + as5011->i2c_client = client; + as5011->input_dev = input_dev; + as5011->button_gpio = plat_data->button_gpio; + as5011->axis_irq = plat_data->axis_irq; + + input_dev->name = "Austria Microsystem as5011 joystick"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(BTN_JOYSTICK, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_X, + AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT); + input_set_abs_params(as5011->input_dev, ABS_Y, + AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT); + + error = gpio_request(as5011->button_gpio, "AS5011 button"); + if (error < 0) { + dev_err(&client->dev, "Failed to request button gpio\n"); + goto err_free_mem; + } + + irq = gpio_to_irq(as5011->button_gpio); + if (irq < 0) { + dev_err(&client->dev, + "Failed to get irq number for button gpio\n"); + error = irq; + goto err_free_button_gpio; + } + + as5011->button_irq = irq; + + error = request_threaded_irq(as5011->button_irq, + NULL, as5011_button_interrupt, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "as5011_button", as5011); + if (error < 0) { + dev_err(&client->dev, + "Can't allocate button irq %d\n", as5011->button_irq); + goto err_free_button_gpio; + } + + error = as5011_configure_chip(as5011, plat_data); + if (error) + goto err_free_button_irq; + + error = request_threaded_irq(as5011->axis_irq, NULL, + as5011_axis_interrupt, + plat_data->axis_irqflags | IRQF_ONESHOT, + "as5011_joystick", as5011); + if (error) { + dev_err(&client->dev, + "Can't allocate axis irq %d\n", plat_data->axis_irq); + goto err_free_button_irq; + } + + error = input_register_device(as5011->input_dev); + if (error) { + dev_err(&client->dev, "Failed to register input device\n"); + goto err_free_axis_irq; + } + + i2c_set_clientdata(client, as5011); + + return 0; + +err_free_axis_irq: + free_irq(as5011->axis_irq, as5011); +err_free_button_irq: + free_irq(as5011->button_irq, as5011); +err_free_button_gpio: + gpio_free(as5011->button_gpio); +err_free_mem: + input_free_device(input_dev); + kfree(as5011); + + return error; +} + +static int as5011_remove(struct i2c_client *client) +{ + struct as5011_device *as5011 = i2c_get_clientdata(client); + + free_irq(as5011->axis_irq, as5011); + free_irq(as5011->button_irq, as5011); + gpio_free(as5011->button_gpio); + + input_unregister_device(as5011->input_dev); + kfree(as5011); + + return 0; +} + +static const struct i2c_device_id as5011_id[] = { + { MODULE_DEVICE_ALIAS, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, as5011_id); + +static struct i2c_driver as5011_driver = { + .driver = { + .name = "as5011", + }, + .probe = as5011_probe, + .remove = as5011_remove, + .id_table = as5011_id, +}; + +module_i2c_driver(as5011_driver); diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c index 55646a6d89f..ae3ee24a236 100644 --- a/drivers/input/joystick/cobra.c +++ b/drivers/input/joystick/cobra.c @@ -1,6 +1,4 @@ /* - * $Id: cobra.c,v 1.19 2002/01/22 20:26:52 vojtech Exp $ - * * Copyright (c) 1999-2001 Vojtech Pavlik */ @@ -31,7 +29,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> -#include <linux/init.h> #include <linux/gameport.h> #include <linux/input.h> #include <linux/jiffies.h> @@ -263,16 +260,4 @@ static struct gameport_driver cobra_drv = { .disconnect = cobra_disconnect, }; -static int __init cobra_init(void) -{ - gameport_register_driver(&cobra_drv); - return 0; -} - -static void __exit cobra_exit(void) -{ - gameport_unregister_driver(&cobra_drv); -} - -module_init(cobra_init); -module_exit(cobra_exit); +module_gameport_driver(cobra_drv); diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c index 960e501c60c..8e7de5c7754 100644 --- a/drivers/input/joystick/db9.c +++ b/drivers/input/joystick/db9.c @@ -1,6 +1,4 @@ /* - * $Id: db9.c,v 1.13 2002/04/07 20:13:37 vojtech Exp $ - * * Copyright (c) 1999-2001 Vojtech Pavlik * * Based on the work of: @@ -38,6 +36,7 @@ #include <linux/parport.h> #include <linux/input.h> #include <linux/mutex.h> +#include <linux/slab.h> MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); MODULE_DESCRIPTION("Atari, Amstrad, Commodore, Amiga, Sega, etc. joystick driver"); diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index 07a32aff5a3..e68e4978648 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -30,6 +30,8 @@ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/delay.h> #include <linux/module.h> @@ -37,6 +39,7 @@ #include <linux/parport.h> #include <linux/input.h> #include <linux/mutex.h> +#include <linux/slab.h> MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); MODULE_DESCRIPTION("NES, SNES, N64, MultiSystem, PSX gamepad driver"); @@ -61,48 +64,72 @@ MODULE_PARM_DESC(map3, "Describes third set of devices"); /* see also gs_psx_delay parameter in PSX support section */ -#define GC_SNES 1 -#define GC_NES 2 -#define GC_NES4 3 -#define GC_MULTI 4 -#define GC_MULTI2 5 -#define GC_N64 6 -#define GC_PSX 7 -#define GC_DDR 8 -#define GC_SNESMOUSE 9 - -#define GC_MAX 9 +enum gc_type { + GC_NONE = 0, + GC_SNES, + GC_NES, + GC_NES4, + GC_MULTI, + GC_MULTI2, + GC_N64, + GC_PSX, + GC_DDR, + GC_SNESMOUSE, + GC_MAX +}; #define GC_REFRESH_TIME HZ/100 +struct gc_pad { + struct input_dev *dev; + enum gc_type type; + char phys[32]; +}; + struct gc { struct pardevice *pd; - struct input_dev *dev[GC_MAX_DEVICES]; + struct gc_pad pads[GC_MAX_DEVICES]; struct timer_list timer; - unsigned char pads[GC_MAX + 1]; + int pad_count[GC_MAX]; int used; struct mutex mutex; - char phys[GC_MAX_DEVICES][32]; +}; + +struct gc_subdev { + unsigned int idx; }; static struct gc *gc_base[3]; -static int gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08 }; +static const int gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08 }; + +static const char *gc_names[] = { + NULL, "SNES pad", "NES pad", "NES FourPort", "Multisystem joystick", + "Multisystem 2-button joystick", "N64 controller", "PSX controller", + "PSX DDR controller", "SNES mouse" +}; -static char *gc_names[] = { NULL, "SNES pad", "NES pad", "NES FourPort", "Multisystem joystick", - "Multisystem 2-button joystick", "N64 controller", "PSX controller", - "PSX DDR controller", "SNES mouse" }; /* * N64 support. */ -static unsigned char gc_n64_bytes[] = { 0, 1, 13, 15, 14, 12, 10, 11, 2, 3 }; -static short gc_n64_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_TRIGGER, BTN_START }; +static const unsigned char gc_n64_bytes[] = { 0, 1, 13, 15, 14, 12, 10, 11, 2, 3 }; +static const short gc_n64_btn[] = { + BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, + BTN_TL, BTN_TR, BTN_TRIGGER, BTN_START +}; #define GC_N64_LENGTH 32 /* N64 bit length, not including stop bit */ -#define GC_N64_REQUEST_LENGTH 37 /* transmit request sequence is 9 bits long */ +#define GC_N64_STOP_LENGTH 5 /* Length of encoded stop bit */ +#define GC_N64_CMD_00 0x11111111UL +#define GC_N64_CMD_01 0xd1111111UL +#define GC_N64_CMD_03 0xdd111111UL +#define GC_N64_CMD_1b 0xdd1dd111UL +#define GC_N64_CMD_c0 0x111111ddUL +#define GC_N64_CMD_80 0x1111111dUL +#define GC_N64_STOP_BIT 0x1d /* Encoded stop bit */ +#define GC_N64_REQUEST_DATA GC_N64_CMD_01 /* the request data command */ #define GC_N64_DELAY 133 /* delay between transmit request, and response ready (us) */ -#define GC_N64_REQUEST 0x1dd1111111ULL /* the request data command (encoded for 000000011) */ #define GC_N64_DWS 3 /* delay between write segments (required for sound playback because of ISA DMA) */ /* GC_N64_DWS > 24 is known to fail */ #define GC_N64_POWER_W 0xe2 /* power during write (transmit request) */ @@ -114,8 +141,40 @@ static short gc_n64_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, #define GC_N64_CLOCK 0x02 /* clock bits for read */ /* + * Used for rumble code. + */ + +/* Send encoded command */ +static void gc_n64_send_command(struct gc *gc, unsigned long cmd, + unsigned char target) +{ + struct parport *port = gc->pd->port; + int i; + + for (i = 0; i < GC_N64_LENGTH; i++) { + unsigned char data = (cmd >> i) & 1 ? target : 0; + parport_write_data(port, GC_N64_POWER_W | data); + udelay(GC_N64_DWS); + } +} + +/* Send stop bit */ +static void gc_n64_send_stop_bit(struct gc *gc, unsigned char target) +{ + struct parport *port = gc->pd->port; + int i; + + for (i = 0; i < GC_N64_STOP_LENGTH; i++) { + unsigned char data = (GC_N64_STOP_BIT >> i) & 1 ? target : 0; + parport_write_data(port, GC_N64_POWER_W | data); + udelay(GC_N64_DWS); + } +} + +/* * gc_n64_read_packet() reads an N64 packet. - * Each pad uses one bit per byte. So all pads connected to this port are read in parallel. + * Each pad uses one bit per byte. So all pads connected to this port + * are read in parallel. */ static void gc_n64_read_packet(struct gc *gc, unsigned char *data) @@ -128,14 +187,13 @@ static void gc_n64_read_packet(struct gc *gc, unsigned char *data) */ local_irq_save(flags); - for (i = 0; i < GC_N64_REQUEST_LENGTH; i++) { - parport_write_data(gc->pd->port, GC_N64_POWER_W | ((GC_N64_REQUEST >> i) & 1 ? GC_N64_OUT : 0)); - udelay(GC_N64_DWS); - } + gc_n64_send_command(gc, GC_N64_REQUEST_DATA, GC_N64_OUT); + gc_n64_send_stop_bit(gc, GC_N64_OUT); local_irq_restore(flags); /* - * Wait for the pad response to be loaded into the 33-bit register of the adapter + * Wait for the pad response to be loaded into the 33-bit register + * of the adapter. */ udelay(GC_N64_DELAY); @@ -146,13 +204,15 @@ static void gc_n64_read_packet(struct gc *gc, unsigned char *data) for (i = 0; i < GC_N64_LENGTH; i++) { parport_write_data(gc->pd->port, GC_N64_POWER_R); + udelay(2); data[i] = parport_read_status(gc->pd->port); parport_write_data(gc->pd->port, GC_N64_POWER_R | GC_N64_CLOCK); } /* - * We must wait 200 ms here for the controller to reinitialize before the next read request. - * No worries as long as gc_read is polled less frequently than this. + * We must wait 200 ms here for the controller to reinitialize before + * the next read request. No worries as long as gc_read is polled less + * frequently than this. */ } @@ -160,45 +220,112 @@ static void gc_n64_read_packet(struct gc *gc, unsigned char *data) static void gc_n64_process_packet(struct gc *gc) { unsigned char data[GC_N64_LENGTH]; - signed char axes[2]; struct input_dev *dev; int i, j, s; + signed char x, y; gc_n64_read_packet(gc, data); for (i = 0; i < GC_MAX_DEVICES; i++) { - dev = gc->dev[i]; - if (!dev) + if (gc->pads[i].type != GC_N64) continue; + dev = gc->pads[i].dev; s = gc_status_bit[i]; - if (s & gc->pads[GC_N64] & ~(data[8] | data[9])) { + if (s & ~(data[8] | data[9])) { - axes[0] = axes[1] = 0; + x = y = 0; for (j = 0; j < 8; j++) { if (data[23 - j] & s) - axes[0] |= 1 << j; + x |= 1 << j; if (data[31 - j] & s) - axes[1] |= 1 << j; + y |= 1 << j; } - input_report_abs(dev, ABS_X, axes[0]); - input_report_abs(dev, ABS_Y, -axes[1]); + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, -y); - input_report_abs(dev, ABS_HAT0X, !(s & data[6]) - !(s & data[7])); - input_report_abs(dev, ABS_HAT0Y, !(s & data[4]) - !(s & data[5])); + input_report_abs(dev, ABS_HAT0X, + !(s & data[6]) - !(s & data[7])); + input_report_abs(dev, ABS_HAT0Y, + !(s & data[4]) - !(s & data[5])); for (j = 0; j < 10; j++) - input_report_key(dev, gc_n64_btn[j], s & data[gc_n64_bytes[j]]); + input_report_key(dev, gc_n64_btn[j], + s & data[gc_n64_bytes[j]]); input_sync(dev); } } } +static int gc_n64_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + int i; + unsigned long flags; + struct gc *gc = input_get_drvdata(dev); + struct gc_subdev *sdev = data; + unsigned char target = 1 << sdev->idx; /* select desired pin */ + + if (effect->type == FF_RUMBLE) { + struct ff_rumble_effect *rumble = &effect->u.rumble; + unsigned int cmd = + rumble->strong_magnitude || rumble->weak_magnitude ? + GC_N64_CMD_01 : GC_N64_CMD_00; + + local_irq_save(flags); + + /* Init Rumble - 0x03, 0x80, 0x01, (34)0x80 */ + gc_n64_send_command(gc, GC_N64_CMD_03, target); + gc_n64_send_command(gc, GC_N64_CMD_80, target); + gc_n64_send_command(gc, GC_N64_CMD_01, target); + for (i = 0; i < 32; i++) + gc_n64_send_command(gc, GC_N64_CMD_80, target); + gc_n64_send_stop_bit(gc, target); + + udelay(GC_N64_DELAY); + + /* Now start or stop it - 0x03, 0xc0, 0zx1b, (32)0x01/0x00 */ + gc_n64_send_command(gc, GC_N64_CMD_03, target); + gc_n64_send_command(gc, GC_N64_CMD_c0, target); + gc_n64_send_command(gc, GC_N64_CMD_1b, target); + for (i = 0; i < 32; i++) + gc_n64_send_command(gc, cmd, target); + gc_n64_send_stop_bit(gc, target); + + local_irq_restore(flags); + + } + + return 0; +} + +static int __init gc_n64_init_ff(struct input_dev *dev, int i) +{ + struct gc_subdev *sdev; + int err; + + sdev = kmalloc(sizeof(*sdev), GFP_KERNEL); + if (!sdev) + return -ENOMEM; + + sdev->idx = i; + + input_set_capability(dev, EV_FF, FF_RUMBLE); + + err = input_ff_create_memless(dev, sdev, gc_n64_play_effect); + if (err) { + kfree(sdev); + return err; + } + + return 0; +} + /* * NES/SNES support. */ @@ -214,9 +341,11 @@ static void gc_n64_process_packet(struct gc *gc) #define GC_NES_CLOCK 0x01 #define GC_NES_LATCH 0x02 -static unsigned char gc_nes_bytes[] = { 0, 1, 2, 3 }; -static unsigned char gc_snes_bytes[] = { 8, 0, 2, 3, 9, 1, 10, 11 }; -static short gc_snes_btn[] = { BTN_A, BTN_B, BTN_SELECT, BTN_START, BTN_X, BTN_Y, BTN_TL, BTN_TR }; +static const unsigned char gc_nes_bytes[] = { 0, 1, 2, 3 }; +static const unsigned char gc_snes_bytes[] = { 8, 0, 2, 3, 9, 1, 10, 11 }; +static const short gc_snes_btn[] = { + BTN_A, BTN_B, BTN_SELECT, BTN_START, BTN_X, BTN_Y, BTN_TL, BTN_TR +}; /* * gc_nes_read_packet() reads a NES/SNES packet. @@ -244,40 +373,51 @@ static void gc_nes_read_packet(struct gc *gc, int length, unsigned char *data) static void gc_nes_process_packet(struct gc *gc) { unsigned char data[GC_SNESMOUSE_LENGTH]; + struct gc_pad *pad; struct input_dev *dev; int i, j, s, len; char x_rel, y_rel; - len = gc->pads[GC_SNESMOUSE] ? GC_SNESMOUSE_LENGTH : - (gc->pads[GC_SNES] ? GC_SNES_LENGTH : GC_NES_LENGTH); + len = gc->pad_count[GC_SNESMOUSE] ? GC_SNESMOUSE_LENGTH : + (gc->pad_count[GC_SNES] ? GC_SNES_LENGTH : GC_NES_LENGTH); gc_nes_read_packet(gc, len, data); for (i = 0; i < GC_MAX_DEVICES; i++) { - dev = gc->dev[i]; - if (!dev) - continue; - + pad = &gc->pads[i]; + dev = pad->dev; s = gc_status_bit[i]; - if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) { + switch (pad->type) { + + case GC_NES: + input_report_abs(dev, ABS_X, !(s & data[6]) - !(s & data[7])); input_report_abs(dev, ABS_Y, !(s & data[4]) - !(s & data[5])); - } - if (s & gc->pads[GC_NES]) for (j = 0; j < 4; j++) - input_report_key(dev, gc_snes_btn[j], s & data[gc_nes_bytes[j]]); + input_report_key(dev, gc_snes_btn[j], + s & data[gc_nes_bytes[j]]); + input_sync(dev); + break; + + case GC_SNES: + + input_report_abs(dev, ABS_X, !(s & data[6]) - !(s & data[7])); + input_report_abs(dev, ABS_Y, !(s & data[4]) - !(s & data[5])); - if (s & gc->pads[GC_SNES]) for (j = 0; j < 8; j++) - input_report_key(dev, gc_snes_btn[j], s & data[gc_snes_bytes[j]]); + input_report_key(dev, gc_snes_btn[j], + s & data[gc_snes_bytes[j]]); + input_sync(dev); + break; - if (s & gc->pads[GC_SNESMOUSE]) { + case GC_SNESMOUSE: /* - * The 4 unused bits from SNES controllers appear to be ID bits - * so use them to make sure iwe are dealing with a mouse. + * The 4 unused bits from SNES controllers appear + * to be ID bits so use them to make sure we are + * dealing with a mouse. * gamepad is connected. This is important since * my SNES gamepad sends 1's for bits 16-31, which * cause the mouse pointer to quickly move to the @@ -310,9 +450,14 @@ static void gc_nes_process_packet(struct gc *gc) y_rel = -y_rel; input_report_rel(dev, REL_Y, y_rel); } + + input_sync(dev); } + break; + + default: + break; } - input_sync(dev); } } @@ -340,29 +485,35 @@ static void gc_multi_read_packet(struct gc *gc, int length, unsigned char *data) static void gc_multi_process_packet(struct gc *gc) { unsigned char data[GC_MULTI2_LENGTH]; + int data_len = gc->pad_count[GC_MULTI2] ? GC_MULTI2_LENGTH : GC_MULTI_LENGTH; + struct gc_pad *pad; struct input_dev *dev; int i, s; - gc_multi_read_packet(gc, gc->pads[GC_MULTI2] ? GC_MULTI2_LENGTH : GC_MULTI_LENGTH, data); + gc_multi_read_packet(gc, data_len, data); for (i = 0; i < GC_MAX_DEVICES; i++) { - - dev = gc->dev[i]; - if (!dev) - continue; - + pad = &gc->pads[i]; + dev = pad->dev; s = gc_status_bit[i]; - if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) { - input_report_abs(dev, ABS_X, !(s & data[2]) - !(s & data[3])); - input_report_abs(dev, ABS_Y, !(s & data[0]) - !(s & data[1])); - input_report_key(dev, BTN_TRIGGER, s & data[4]); - } - - if (s & gc->pads[GC_MULTI2]) + switch (pad->type) { + case GC_MULTI2: input_report_key(dev, BTN_THUMB, s & data[5]); + /* fall through */ - input_sync(dev); + case GC_MULTI: + input_report_abs(dev, ABS_X, + !(s & data[2]) - !(s & data[3])); + input_report_abs(dev, ABS_Y, + !(s & data[0]) - !(s & data[1])); + input_report_key(dev, BTN_TRIGGER, s & data[4]); + input_sync(dev); + break; + + default: + break; + } } } @@ -370,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc) * PSX support * * See documentation at: - * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt + * http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt * http://www.gamesx.com/controldata/psxcont/psxcont.htm - * ftp://milano.usal.es/pablo/ * */ @@ -398,30 +548,41 @@ static int gc_psx_delay = GC_PSX_DELAY; module_param_named(psx_delay, gc_psx_delay, uint, 0); MODULE_PARM_DESC(psx_delay, "Delay when accessing Sony PSX controller (usecs)"); -static short gc_psx_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y }; -static short gc_psx_btn[] = { BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y, - BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR }; -static short gc_psx_ddr_btn[] = { BTN_0, BTN_1, BTN_2, BTN_3 }; +static const short gc_psx_abs[] = { + ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y +}; +static const short gc_psx_btn[] = { + BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y, + BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR +}; +static const short gc_psx_ddr_btn[] = { BTN_0, BTN_1, BTN_2, BTN_3 }; /* * gc_psx_command() writes 8bit command and reads 8bit data from * the psx pad. */ -static void gc_psx_command(struct gc *gc, int b, unsigned char data[GC_MAX_DEVICES]) +static void gc_psx_command(struct gc *gc, int b, unsigned char *data) { + struct parport *port = gc->pd->port; int i, j, cmd, read; - for (i = 0; i < GC_MAX_DEVICES; i++) - data[i] = 0; + memset(data, 0, GC_MAX_DEVICES); for (i = 0; i < GC_PSX_LENGTH; i++, b >>= 1) { cmd = (b & 1) ? GC_PSX_COMMAND : 0; - parport_write_data(gc->pd->port, cmd | GC_PSX_POWER); + parport_write_data(port, cmd | GC_PSX_POWER); udelay(gc_psx_delay); - read = parport_read_status(gc->pd->port) ^ 0x80; - for (j = 0; j < GC_MAX_DEVICES; j++) - data[j] |= (read & gc_status_bit[j] & (gc->pads[GC_PSX] | gc->pads[GC_DDR])) ? (1 << i) : 0; + + read = parport_read_status(port) ^ 0x80; + + for (j = 0; j < GC_MAX_DEVICES; j++) { + struct gc_pad *pad = &gc->pads[j]; + + if (pad->type == GC_PSX || pad->type == GC_DDR) + data[j] |= (read & gc_status_bit[j]) ? (1 << i) : 0; + } + parport_write_data(gc->pd->port, cmd | GC_PSX_CLOCK | GC_PSX_POWER); udelay(gc_psx_delay); } @@ -432,31 +593,40 @@ static void gc_psx_command(struct gc *gc, int b, unsigned char data[GC_MAX_DEVIC * device identifier code. */ -static void gc_psx_read_packet(struct gc *gc, unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES], +static void gc_psx_read_packet(struct gc *gc, + unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES], unsigned char id[GC_MAX_DEVICES]) { int i, j, max_len = 0; unsigned long flags; unsigned char data2[GC_MAX_DEVICES]; - parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER); /* Select pad */ + /* Select pad */ + parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER); udelay(gc_psx_delay); - parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_POWER); /* Deselect, begin command */ + /* Deselect, begin command */ + parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_POWER); udelay(gc_psx_delay); local_irq_save(flags); - gc_psx_command(gc, 0x01, data2); /* Access pad */ - gc_psx_command(gc, 0x42, id); /* Get device ids */ - gc_psx_command(gc, 0, data2); /* Dump status */ + gc_psx_command(gc, 0x01, data2); /* Access pad */ + gc_psx_command(gc, 0x42, id); /* Get device ids */ + gc_psx_command(gc, 0, data2); /* Dump status */ - for (i =0; i < GC_MAX_DEVICES; i++) /* Find the longest pad */ - if((gc_status_bit[i] & (gc->pads[GC_PSX] | gc->pads[GC_DDR])) - && (GC_PSX_LEN(id[i]) > max_len) - && (GC_PSX_LEN(id[i]) <= GC_PSX_BYTES)) + /* Find the longest pad */ + for (i = 0; i < GC_MAX_DEVICES; i++) { + struct gc_pad *pad = &gc->pads[i]; + + if ((pad->type == GC_PSX || pad->type == GC_DDR) && + GC_PSX_LEN(id[i]) > max_len && + GC_PSX_LEN(id[i]) <= GC_PSX_BYTES) { max_len = GC_PSX_LEN(id[i]); + } + } - for (i = 0; i < max_len; i++) { /* Read in all the data */ + /* Read in all the data */ + for (i = 0; i < max_len; i++) { gc_psx_command(gc, 0, data2); for (j = 0; j < GC_MAX_DEVICES; j++) data[j][i] = data2[j]; @@ -466,86 +636,104 @@ static void gc_psx_read_packet(struct gc *gc, unsigned char data[GC_MAX_DEVICES] parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER); - for(i = 0; i < GC_MAX_DEVICES; i++) /* Set id's to the real value */ + /* Set id's to the real value */ + for (i = 0; i < GC_MAX_DEVICES; i++) id[i] = GC_PSX_ID(id[i]); } -static void gc_psx_process_packet(struct gc *gc) +static void gc_psx_report_one(struct gc_pad *pad, unsigned char psx_type, + unsigned char *data) { - unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES]; - unsigned char id[GC_MAX_DEVICES]; - struct input_dev *dev; - int i, j; + struct input_dev *dev = pad->dev; + int i; - gc_psx_read_packet(gc, data, id); + switch (psx_type) { - for (i = 0; i < GC_MAX_DEVICES; i++) { + case GC_PSX_RUMBLE: - dev = gc->dev[i]; - if (!dev) - continue; + input_report_key(dev, BTN_THUMBL, ~data[0] & 0x04); + input_report_key(dev, BTN_THUMBR, ~data[0] & 0x02); - switch (id[i]) { + case GC_PSX_NEGCON: + case GC_PSX_ANALOG: - case GC_PSX_RUMBLE: + if (pad->type == GC_DDR) { + for (i = 0; i < 4; i++) + input_report_key(dev, gc_psx_ddr_btn[i], + ~data[0] & (0x10 << i)); + } else { + for (i = 0; i < 4; i++) + input_report_abs(dev, gc_psx_abs[i + 2], + data[i + 2]); - input_report_key(dev, BTN_THUMBL, ~data[i][0] & 0x04); - input_report_key(dev, BTN_THUMBR, ~data[i][0] & 0x02); + input_report_abs(dev, ABS_X, + !!(data[0] & 0x80) * 128 + !(data[0] & 0x20) * 127); + input_report_abs(dev, ABS_Y, + !!(data[0] & 0x10) * 128 + !(data[0] & 0x40) * 127); + } - case GC_PSX_NEGCON: - case GC_PSX_ANALOG: + for (i = 0; i < 8; i++) + input_report_key(dev, gc_psx_btn[i], ~data[1] & (1 << i)); - if (gc->pads[GC_DDR] & gc_status_bit[i]) { - for(j = 0; j < 4; j++) - input_report_key(dev, gc_psx_ddr_btn[j], ~data[i][0] & (0x10 << j)); - } else { - for (j = 0; j < 4; j++) - input_report_abs(dev, gc_psx_abs[j + 2], data[i][j + 2]); + input_report_key(dev, BTN_START, ~data[0] & 0x08); + input_report_key(dev, BTN_SELECT, ~data[0] & 0x01); - input_report_abs(dev, ABS_X, 128 + !(data[i][0] & 0x20) * 127 - !(data[i][0] & 0x80) * 128); - input_report_abs(dev, ABS_Y, 128 + !(data[i][0] & 0x40) * 127 - !(data[i][0] & 0x10) * 128); - } + input_sync(dev); - for (j = 0; j < 8; j++) - input_report_key(dev, gc_psx_btn[j], ~data[i][1] & (1 << j)); + break; - input_report_key(dev, BTN_START, ~data[i][0] & 0x08); - input_report_key(dev, BTN_SELECT, ~data[i][0] & 0x01); + case GC_PSX_NORMAL: - input_sync(dev); + if (pad->type == GC_DDR) { + for (i = 0; i < 4; i++) + input_report_key(dev, gc_psx_ddr_btn[i], + ~data[0] & (0x10 << i)); + } else { + input_report_abs(dev, ABS_X, + !!(data[0] & 0x80) * 128 + !(data[0] & 0x20) * 127); + input_report_abs(dev, ABS_Y, + !!(data[0] & 0x10) * 128 + !(data[0] & 0x40) * 127); - break; - - case GC_PSX_NORMAL: - if (gc->pads[GC_DDR] & gc_status_bit[i]) { - for(j = 0; j < 4; j++) - input_report_key(dev, gc_psx_ddr_btn[j], ~data[i][0] & (0x10 << j)); - } else { - input_report_abs(dev, ABS_X, 128 + !(data[i][0] & 0x20) * 127 - !(data[i][0] & 0x80) * 128); - input_report_abs(dev, ABS_Y, 128 + !(data[i][0] & 0x40) * 127 - !(data[i][0] & 0x10) * 128); - - /* for some reason if the extra axes are left unset they drift */ - /* for (j = 0; j < 4; j++) - input_report_abs(dev, gc_psx_abs[j + 2], 128); - * This needs to be debugged properly, - * maybe fuzz processing needs to be done in input_sync() - * --vojtech - */ - } + /* + * For some reason if the extra axes are left unset + * they drift. + * for (i = 0; i < 4; i++) + input_report_abs(dev, gc_psx_abs[i + 2], 128); + * This needs to be debugged properly, + * maybe fuzz processing needs to be done + * in input_sync() + * --vojtech + */ + } - for (j = 0; j < 8; j++) - input_report_key(dev, gc_psx_btn[j], ~data[i][1] & (1 << j)); + for (i = 0; i < 8; i++) + input_report_key(dev, gc_psx_btn[i], ~data[1] & (1 << i)); - input_report_key(dev, BTN_START, ~data[i][0] & 0x08); - input_report_key(dev, BTN_SELECT, ~data[i][0] & 0x01); + input_report_key(dev, BTN_START, ~data[0] & 0x08); + input_report_key(dev, BTN_SELECT, ~data[0] & 0x01); - input_sync(dev); + input_sync(dev); - break; + break; - case 0: /* not a pad, ignore */ - break; - } + default: /* not a pad, ignore */ + break; + } +} + +static void gc_psx_process_packet(struct gc *gc) +{ + unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES]; + unsigned char id[GC_MAX_DEVICES]; + struct gc_pad *pad; + int i; + + gc_psx_read_packet(gc, data, id); + + for (i = 0; i < GC_MAX_DEVICES; i++) { + pad = &gc->pads[i]; + if (pad->type == GC_PSX || pad->type == GC_DDR) + gc_psx_report_one(pad, id[i], data[i]); } } @@ -561,28 +749,31 @@ static void gc_timer(unsigned long private) * N64 pads - must be read first, any read confuses them for 200 us */ - if (gc->pads[GC_N64]) + if (gc->pad_count[GC_N64]) gc_n64_process_packet(gc); /* * NES and SNES pads or mouse */ - if (gc->pads[GC_NES] || gc->pads[GC_SNES] || gc->pads[GC_SNESMOUSE]) + if (gc->pad_count[GC_NES] || + gc->pad_count[GC_SNES] || + gc->pad_count[GC_SNESMOUSE]) { gc_nes_process_packet(gc); + } /* * Multi and Multi2 joysticks */ - if (gc->pads[GC_MULTI] || gc->pads[GC_MULTI2]) + if (gc->pad_count[GC_MULTI] || gc->pad_count[GC_MULTI2]) gc_multi_process_packet(gc); /* * PSX controllers */ - if (gc->pads[GC_PSX] || gc->pads[GC_DDR]) + if (gc->pad_count[GC_PSX] || gc->pad_count[GC_DDR]) gc_psx_process_packet(gc); mod_timer(&gc->timer, jiffies + GC_REFRESH_TIME); @@ -622,25 +813,29 @@ static void gc_close(struct input_dev *dev) static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type) { + struct gc_pad *pad = &gc->pads[idx]; struct input_dev *input_dev; int i; + int err; - if (!pad_type) - return 0; - - if (pad_type < 1 || pad_type > GC_MAX) { - printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", pad_type); + if (pad_type < 1 || pad_type >= GC_MAX) { + pr_err("Pad type %d unknown\n", pad_type); return -EINVAL; } - gc->dev[idx] = input_dev = input_allocate_device(); + pad->dev = input_dev = input_allocate_device(); if (!input_dev) { - printk(KERN_ERR "gamecon.c: Not enough memory for input device\n"); + pr_err("Not enough memory for input device\n"); return -ENOMEM; } + pad->type = pad_type; + + snprintf(pad->phys, sizeof(pad->phys), + "%s/input%d", gc->pd->port->name, idx); + input_dev->name = gc_names[pad_type]; - input_dev->phys = gc->phys[idx]; + input_dev->phys = pad->phys; input_dev->id.bustype = BUS_PARPORT; input_dev->id.vendor = 0x0001; input_dev->id.product = pad_type; @@ -659,61 +854,76 @@ static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type) } else input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); - gc->pads[0] |= gc_status_bit[idx]; - gc->pads[pad_type] |= gc_status_bit[idx]; + gc->pad_count[pad_type]++; switch (pad_type) { - case GC_N64: - for (i = 0; i < 10; i++) - set_bit(gc_n64_btn[i], input_dev->keybit); + case GC_N64: + for (i = 0; i < 10; i++) + __set_bit(gc_n64_btn[i], input_dev->keybit); - for (i = 0; i < 2; i++) { - input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2); - input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0); - } - - break; - - case GC_SNESMOUSE: - set_bit(BTN_LEFT, input_dev->keybit); - set_bit(BTN_RIGHT, input_dev->keybit); - set_bit(REL_X, input_dev->relbit); - set_bit(REL_Y, input_dev->relbit); - break; - - case GC_SNES: - for (i = 4; i < 8; i++) - set_bit(gc_snes_btn[i], input_dev->keybit); - case GC_NES: - for (i = 0; i < 4; i++) - set_bit(gc_snes_btn[i], input_dev->keybit); - break; - - case GC_MULTI2: - set_bit(BTN_THUMB, input_dev->keybit); - case GC_MULTI: - set_bit(BTN_TRIGGER, input_dev->keybit); - break; - - case GC_PSX: - for (i = 0; i < 6; i++) - input_set_abs_params(input_dev, gc_psx_abs[i], 4, 252, 0, 2); - for (i = 0; i < 12; i++) - set_bit(gc_psx_btn[i], input_dev->keybit); - - break; + for (i = 0; i < 2; i++) { + input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2); + input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0); + } - case GC_DDR: - for (i = 0; i < 4; i++) - set_bit(gc_psx_ddr_btn[i], input_dev->keybit); - for (i = 0; i < 12; i++) - set_bit(gc_psx_btn[i], input_dev->keybit); + err = gc_n64_init_ff(input_dev, idx); + if (err) { + pr_warning("Failed to initiate rumble for N64 device %d\n", idx); + goto err_free_dev; + } - break; + break; + + case GC_SNESMOUSE: + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(REL_X, input_dev->relbit); + __set_bit(REL_Y, input_dev->relbit); + break; + + case GC_SNES: + for (i = 4; i < 8; i++) + __set_bit(gc_snes_btn[i], input_dev->keybit); + case GC_NES: + for (i = 0; i < 4; i++) + __set_bit(gc_snes_btn[i], input_dev->keybit); + break; + + case GC_MULTI2: + __set_bit(BTN_THUMB, input_dev->keybit); + case GC_MULTI: + __set_bit(BTN_TRIGGER, input_dev->keybit); + break; + + case GC_PSX: + for (i = 0; i < 6; i++) + input_set_abs_params(input_dev, + gc_psx_abs[i], 4, 252, 0, 2); + for (i = 0; i < 12; i++) + __set_bit(gc_psx_btn[i], input_dev->keybit); + + break; + + case GC_DDR: + for (i = 0; i < 4; i++) + __set_bit(gc_psx_ddr_btn[i], input_dev->keybit); + for (i = 0; i < 12; i++) + __set_bit(gc_psx_btn[i], input_dev->keybit); + + break; } + err = input_register_device(pad->dev); + if (err) + goto err_free_dev; + return 0; + +err_free_dev: + input_free_device(pad->dev); + pad->dev = NULL; + return err; } static struct gc __init *gc_probe(int parport, int *pads, int n_pads) @@ -722,52 +932,47 @@ static struct gc __init *gc_probe(int parport, int *pads, int n_pads) struct parport *pp; struct pardevice *pd; int i; + int count = 0; int err; pp = parport_find_number(parport); if (!pp) { - printk(KERN_ERR "gamecon.c: no such parport\n"); + pr_err("no such parport %d\n", parport); err = -EINVAL; goto err_out; } pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); if (!pd) { - printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n"); + pr_err("parport busy already - lp.o loaded?\n"); err = -EBUSY; goto err_put_pp; } gc = kzalloc(sizeof(struct gc), GFP_KERNEL); if (!gc) { - printk(KERN_ERR "gamecon.c: Not enough memory\n"); + pr_err("Not enough memory\n"); err = -ENOMEM; goto err_unreg_pardev; } mutex_init(&gc->mutex); gc->pd = pd; - init_timer(&gc->timer); - gc->timer.data = (long) gc; - gc->timer.function = gc_timer; + setup_timer(&gc->timer, gc_timer, (long) gc); for (i = 0; i < n_pads && i < GC_MAX_DEVICES; i++) { if (!pads[i]) continue; - snprintf(gc->phys[i], sizeof(gc->phys[i]), - "%s/input%d", gc->pd->port->name, i); err = gc_setup_pad(gc, i, pads[i]); if (err) goto err_unreg_devs; - err = input_register_device(gc->dev[i]); - if (err) - goto err_free_dev; + count++; } - if (!gc->pads[0]) { - printk(KERN_ERR "gamecon.c: No valid devices specified\n"); + if (count == 0) { + pr_err("No valid devices specified\n"); err = -EINVAL; goto err_free_gc; } @@ -775,12 +980,10 @@ static struct gc __init *gc_probe(int parport, int *pads, int n_pads) parport_put_port(pp); return gc; - err_free_dev: - input_free_device(gc->dev[i]); err_unreg_devs: while (--i >= 0) - if (gc->dev[i]) - input_unregister_device(gc->dev[i]); + if (gc->pads[i].dev) + input_unregister_device(gc->pads[i].dev); err_free_gc: kfree(gc); err_unreg_pardev: @@ -796,8 +999,8 @@ static void gc_remove(struct gc *gc) int i; for (i = 0; i < GC_MAX_DEVICES; i++) - if (gc->dev[i]) - input_unregister_device(gc->dev[i]); + if (gc->pads[i].dev) + input_unregister_device(gc->pads[i].dev); parport_unregister_device(gc->pd); kfree(gc); } @@ -813,7 +1016,7 @@ static int __init gc_init(void) continue; if (gc_cfg[i].nargs < 2) { - printk(KERN_ERR "gamecon.c: at least one device must be specified\n"); + pr_err("at least one device must be specified\n"); err = -EINVAL; break; } diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c index 1f6302c0eb3..0f519db6474 100644 --- a/drivers/input/joystick/gf2k.c +++ b/drivers/input/joystick/gf2k.c @@ -1,6 +1,4 @@ /* - * $Id: gf2k.c,v 1.19 2002/01/22 20:27:43 vojtech Exp $ - * * Copyright (c) 1998-2001 Vojtech Pavlik */ @@ -32,7 +30,6 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/input.h> #include <linux/gameport.h> #include <linux/jiffies.h> @@ -279,7 +276,7 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) } #ifdef RESET_WORKS - if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) || + if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) && (gf2k->id != (GB(31,2,0) | GB(27,3,2) | GB(24,3,5)))) { err = -ENODEV; goto fail2; @@ -320,11 +317,8 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) for (i = 0; i < gf2k_axes[gf2k->id]; i++) set_bit(gf2k_abs[i], input_dev->absbit); - for (i = 0; i < gf2k_hats[gf2k->id]; i++) { - set_bit(ABS_HAT0X + i, input_dev->absbit); - input_dev->absmin[ABS_HAT0X + i] = -1; - input_dev->absmax[ABS_HAT0X + i] = 1; - } + for (i = 0; i < gf2k_hats[gf2k->id]; i++) + input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0); for (i = 0; i < gf2k_joys[gf2k->id]; i++) set_bit(gf2k_btn_joy[i], input_dev->keybit); @@ -336,11 +330,14 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) gf2k_read(gf2k, data); for (i = 0; i < gf2k_axes[gf2k->id]; i++) { - input_dev->absmax[gf2k_abs[i]] = (i < 2) ? input_dev->abs[gf2k_abs[i]] * 2 - 32 : - input_dev->abs[gf2k_abs[0]] + input_dev->abs[gf2k_abs[1]] - 32; - input_dev->absmin[gf2k_abs[i]] = 32; - input_dev->absfuzz[gf2k_abs[i]] = 8; - input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0; + int max = i < 2 ? + input_abs_get_val(input_dev, gf2k_abs[i]) * 2 : + input_abs_get_val(input_dev, gf2k_abs[0]) + + input_abs_get_val(input_dev, gf2k_abs[1]); + int flat = i < 2 ? 24 : 0; + + input_set_abs_params(input_dev, gf2k_abs[i], + 32, max - 32, 8, flat); } err = input_register_device(gf2k->dev); @@ -375,16 +372,4 @@ static struct gameport_driver gf2k_drv = { .disconnect = gf2k_disconnect, }; -static int __init gf2k_init(void) -{ - gameport_register_driver(&gf2k_drv); - return 0; -} - -static void __exit gf2k_exit(void) -{ - gameport_unregister_driver(&gf2k_drv); -} - -module_init(gf2k_init); -module_exit(gf2k_exit); +module_gameport_driver(gf2k_drv); diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c index fd3853ab1aa..eac9c5b8d73 100644 --- a/drivers/input/joystick/grip.c +++ b/drivers/input/joystick/grip.c @@ -1,6 +1,4 @@ /* - * $Id: grip.c,v 1.21 2002/01/22 20:27:57 vojtech Exp $ - * * Copyright (c) 1998-2001 Vojtech Pavlik */ @@ -30,7 +28,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/gameport.h> #include <linux/input.h> @@ -426,16 +423,4 @@ static struct gameport_driver grip_drv = { .disconnect = grip_disconnect, }; -static int __init grip_init(void) -{ - gameport_register_driver(&grip_drv); - return 0; -} - -static void __exit grip_exit(void) -{ - gameport_unregister_driver(&grip_drv); -} - -module_init(grip_init); -module_exit(grip_exit); +module_gameport_driver(grip_drv); diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c index c57e21d68c0..573191dd78e 100644 --- a/drivers/input/joystick/grip_mp.c +++ b/drivers/input/joystick/grip_mp.c @@ -1,6 +1,4 @@ /* - * $Id: grip_mp.c,v 1.9 2002/07/20 19:28:45 bonnland Exp $ - * * Driver for the Gravis Grip Multiport, a gamepad "hub" that * connects up to four 9-pin digital gamepads/joysticks. * Driver tested on SMP and UP kernel versions 2.4.18-4 and 2.4.18-5. @@ -13,7 +11,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/gameport.h> #include <linux/input.h> @@ -689,16 +686,4 @@ static struct gameport_driver grip_drv = { .disconnect = grip_disconnect, }; -static int __init grip_init(void) -{ - gameport_register_driver(&grip_drv); - return 0; -} - -static void __exit grip_exit(void) -{ - gameport_unregister_driver(&grip_drv); -} - -module_init(grip_init); -module_exit(grip_exit); +module_gameport_driver(grip_drv); diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c index aa6bfb3fb8c..a9ac2f9cfce 100644 --- a/drivers/input/joystick/guillemot.c +++ b/drivers/input/joystick/guillemot.c @@ -1,6 +1,4 @@ /* - * $Id: guillemot.c,v 1.10 2002/01/22 20:28:12 vojtech Exp $ - * * Copyright (c) 2001 Vojtech Pavlik */ @@ -32,7 +30,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/gameport.h> #include <linux/input.h> #include <linux/jiffies.h> @@ -283,16 +280,4 @@ static struct gameport_driver guillemot_drv = { .disconnect = guillemot_disconnect, }; -static int __init guillemot_init(void) -{ - gameport_register_driver(&guillemot_drv); - return 0; -} - -static void __exit guillemot_exit(void) -{ - gameport_unregister_driver(&guillemot_drv); -} - -module_init(guillemot_init); -module_exit(guillemot_exit); +module_gameport_driver(guillemot_drv); diff --git a/drivers/input/joystick/iforce/Makefile b/drivers/input/joystick/iforce/Makefile index 74daff49ab6..bc5bda22f15 100644 --- a/drivers/input/joystick/iforce/Makefile +++ b/drivers/input/joystick/iforce/Makefile @@ -4,17 +4,8 @@ # By Johann Deneux <johann.deneux@gmail.com> # -# Goal definition -iforce-objs := iforce-ff.o iforce-main.o iforce-packets.o - obj-$(CONFIG_JOYSTICK_IFORCE) += iforce.o -ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y) - iforce-objs += iforce-serio.o -endif - -ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y) - iforce-objs += iforce-usb.o -endif - -EXTRA_CFLAGS = -Werror-implicit-function-declaration +iforce-y := iforce-ff.o iforce-main.o iforce-packets.o +iforce-$(CONFIG_JOYSTICK_IFORCE_232) += iforce-serio.o +iforce-$(CONFIG_JOYSTICK_IFORCE_USB) += iforce-usb.o diff --git a/drivers/input/joystick/iforce/iforce-ff.c b/drivers/input/joystick/iforce/iforce-ff.c index f2a4381d0ab..0de9a0943a9 100644 --- a/drivers/input/joystick/iforce/iforce-ff.c +++ b/drivers/input/joystick/iforce/iforce-ff.c @@ -1,6 +1,4 @@ /* - * $Id: iforce-ff.c,v 1.9 2002/02/02 19:28:35 jdeneux Exp $ - * * Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz> * Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com> * @@ -199,13 +197,16 @@ static unsigned char find_button(struct iforce *iforce, signed short button) * Analyse the changes in an effect, and tell if we need to send an condition * parameter packet */ -static int need_condition_modifier(struct ff_effect *old, struct ff_effect *new) +static int need_condition_modifier(struct iforce *iforce, + struct ff_effect *old, + struct ff_effect *new) { int ret = 0; int i; if (new->type != FF_SPRING && new->type != FF_FRICTION) { - warn("bad effect type in need_condition_modifier"); + dev_warn(&iforce->dev->dev, "bad effect type in %s\n", + __func__); return 0; } @@ -224,10 +225,13 @@ static int need_condition_modifier(struct ff_effect *old, struct ff_effect *new) * Analyse the changes in an effect, and tell if we need to send a magnitude * parameter packet */ -static int need_magnitude_modifier(struct ff_effect *old, struct ff_effect *effect) +static int need_magnitude_modifier(struct iforce *iforce, + struct ff_effect *old, + struct ff_effect *effect) { if (effect->type != FF_CONSTANT) { - warn("bad effect type in need_envelope_modifier"); + dev_warn(&iforce->dev->dev, "bad effect type in %s\n", + __func__); return 0; } @@ -238,7 +242,8 @@ static int need_magnitude_modifier(struct ff_effect *old, struct ff_effect *effe * Analyse the changes in an effect, and tell if we need to send an envelope * parameter packet */ -static int need_envelope_modifier(struct ff_effect *old, struct ff_effect *effect) +static int need_envelope_modifier(struct iforce *iforce, struct ff_effect *old, + struct ff_effect *effect) { switch (effect->type) { case FF_CONSTANT: @@ -258,7 +263,8 @@ static int need_envelope_modifier(struct ff_effect *old, struct ff_effect *effec break; default: - warn("bad effect type in need_envelope_modifier"); + dev_warn(&iforce->dev->dev, "bad effect type in %s\n", + __func__); } return 0; @@ -268,10 +274,12 @@ static int need_envelope_modifier(struct ff_effect *old, struct ff_effect *effec * Analyse the changes in an effect, and tell if we need to send a periodic * parameter effect */ -static int need_period_modifier(struct ff_effect *old, struct ff_effect *new) +static int need_period_modifier(struct iforce *iforce, struct ff_effect *old, + struct ff_effect *new) { if (new->type != FF_PERIODIC) { - warn("bad effect type in need_period_modifier"); + dev_warn(&iforce->dev->dev, "bad effect type in %s\n", + __func__); return 0; } return (old->u.periodic.period != new->u.periodic.period @@ -357,7 +365,7 @@ int iforce_upload_periodic(struct iforce *iforce, struct ff_effect *effect, stru int param2_err = 1; int core_err = 0; - if (!old || need_period_modifier(old, effect)) { + if (!old || need_period_modifier(iforce, old, effect)) { param1_err = make_period_modifier(iforce, mod1_chunk, old != NULL, effect->u.periodic.magnitude, effect->u.periodic.offset, @@ -367,7 +375,7 @@ int iforce_upload_periodic(struct iforce *iforce, struct ff_effect *effect, stru set_bit(FF_MOD1_IS_USED, core_effect->flags); } - if (!old || need_envelope_modifier(old, effect)) { + if (!old || need_envelope_modifier(iforce, old, effect)) { param2_err = make_envelope_modifier(iforce, mod2_chunk, old !=NULL, effect->u.periodic.envelope.attack_length, @@ -427,7 +435,7 @@ int iforce_upload_constant(struct iforce *iforce, struct ff_effect *effect, stru int param2_err = 1; int core_err = 0; - if (!old || need_magnitude_modifier(old, effect)) { + if (!old || need_magnitude_modifier(iforce, old, effect)) { param1_err = make_magnitude_modifier(iforce, mod1_chunk, old != NULL, effect->u.constant.level); @@ -436,7 +444,7 @@ int iforce_upload_constant(struct iforce *iforce, struct ff_effect *effect, stru set_bit(FF_MOD1_IS_USED, core_effect->flags); } - if (!old || need_envelope_modifier(old, effect)) { + if (!old || need_envelope_modifier(iforce, old, effect)) { param2_err = make_envelope_modifier(iforce, mod2_chunk, old != NULL, effect->u.constant.envelope.attack_length, @@ -489,7 +497,7 @@ int iforce_upload_condition(struct iforce *iforce, struct ff_effect *effect, str default: return -1; } - if (!old || need_condition_modifier(old, effect)) { + if (!old || need_condition_modifier(iforce, old, effect)) { param_err = make_condition_modifier(iforce, mod1_chunk, old != NULL, effect->u.condition[0].right_saturation, diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index a2517fa72eb..daeeb4c7e3b 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -1,6 +1,4 @@ /* - * $Id: iforce-main.c,v 1.19 2002/07/07 10:22:50 jdeneux Exp $ - * * Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz> * Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com> * @@ -56,6 +54,9 @@ static signed short btn_avb_wheel[] = static signed short abs_joystick[] = { ABS_X, ABS_Y, ABS_THROTTLE, ABS_HAT0X, ABS_HAT0Y, -1 }; +static signed short abs_joystick_rudder[] = +{ ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER, ABS_HAT0X, ABS_HAT0Y, -1 }; + static signed short abs_avb_pegasus[] = { ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER, ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y, -1 }; @@ -76,9 +77,11 @@ static struct iforce_device iforce_device[] = { { 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_avb_wheel, abs_wheel, ff_iforce }, { 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_avb_tw, abs_wheel, ff_iforce }, //? { 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //? + { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, { 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //? + { 0x06f8, 0x0001, "Guillemot Jet Leader Force Feedback", btn_joystick, abs_joystick_rudder, ff_iforce }, { 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //? - { 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //? + { 0x06f8, 0xa302, "Guillemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //? { 0x06d6, 0x29bc, "Trust Force Feedback Race Master", btn_wheel, abs_wheel, ff_iforce }, { 0x0000, 0x0000, "Unknown I-Force Device [%04x:%04x]", btn_joystick, abs_joystick, ff_iforce } }; @@ -211,7 +214,7 @@ static int iforce_open(struct input_dev *dev) return 0; } -static void iforce_release(struct input_dev *dev) +static void iforce_close(struct input_dev *dev) { struct iforce *iforce = input_get_drvdata(dev); int i; @@ -220,37 +223,26 @@ static void iforce_release(struct input_dev *dev) /* Check: no effects should be present in memory */ for (i = 0; i < dev->ff->max_effects; i++) { if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags)) { - warn("iforce_release: Device still owns effects"); + dev_warn(&dev->dev, + "%s: Device still owns effects\n", + __func__); break; } } /* Disable force feedback playback */ iforce_send_packet(iforce, FF_CMD_ENABLE, "\001"); + /* Wait for the command to complete */ + wait_event_interruptible(iforce->wait, + !test_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags)); } switch (iforce->bus) { #ifdef CONFIG_JOYSTICK_IFORCE_USB - case IFORCE_USB: - usb_kill_urb(iforce->irq); - - /* The device was unplugged before the file - * was released */ - if (iforce->usbdev == NULL) { - iforce_delete_device(iforce); - kfree(iforce); - } - break; -#endif - } -} - -void iforce_delete_device(struct iforce *iforce) -{ - switch (iforce->bus) { -#ifdef CONFIG_JOYSTICK_IFORCE_USB case IFORCE_USB: - iforce_usb_delete(iforce); + usb_kill_urb(iforce->irq); + usb_kill_urb(iforce->out); + usb_kill_urb(iforce->ctrl); break; #endif #ifdef CONFIG_JOYSTICK_IFORCE_232 @@ -302,7 +294,7 @@ int iforce_init_device(struct iforce *iforce) input_dev->name = "Unknown I-Force device"; input_dev->open = iforce_open; - input_dev->close = iforce_release; + input_dev->close = iforce_close; /* * On-device memory allocation. @@ -325,7 +317,8 @@ int iforce_init_device(struct iforce *iforce) break; if (i == 20) { /* 5 seconds */ - err("Timeout waiting for response from device."); + dev_err(&input_dev->dev, + "Timeout waiting for response from device.\n"); error = -ENODEV; goto fail; } @@ -337,26 +330,26 @@ int iforce_init_device(struct iforce *iforce) if (!iforce_get_id_packet(iforce, "M")) input_dev->id.vendor = (iforce->edata[2] << 8) | iforce->edata[1]; else - warn("Device does not respond to id packet M"); + dev_warn(&iforce->dev->dev, "Device does not respond to id packet M\n"); if (!iforce_get_id_packet(iforce, "P")) input_dev->id.product = (iforce->edata[2] << 8) | iforce->edata[1]; else - warn("Device does not respond to id packet P"); + dev_warn(&iforce->dev->dev, "Device does not respond to id packet P\n"); if (!iforce_get_id_packet(iforce, "B")) iforce->device_memory.end = (iforce->edata[2] << 8) | iforce->edata[1]; else - warn("Device does not respond to id packet B"); + dev_warn(&iforce->dev->dev, "Device does not respond to id packet B\n"); if (!iforce_get_id_packet(iforce, "N")) ff_effects = iforce->edata[1]; else - warn("Device does not respond to id packet N"); + dev_warn(&iforce->dev->dev, "Device does not respond to id packet N\n"); /* Check if the device can store more effects than the driver can really handle */ if (ff_effects > IFORCE_EFFECTS_MAX) { - warn("Limiting number of effects to %d (device reports %d)", + dev_warn(&iforce->dev->dev, "Limiting number of effects to %d (device reports %d)\n", IFORCE_EFFECTS_MAX, ff_effects); ff_effects = IFORCE_EFFECTS_MAX; } diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c index 45c4939ced7..08f98f2eaf8 100644 --- a/drivers/input/joystick/iforce/iforce-packets.c +++ b/drivers/input/joystick/iforce/iforce-packets.c @@ -1,6 +1,4 @@ /* - * $Id: iforce-packets.c,v 1.16 2002/07/07 10:22:50 jdeneux Exp $ - * * Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz> * Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com> * @@ -67,7 +65,8 @@ int iforce_send_packet(struct iforce *iforce, u16 cmd, unsigned char* data) if (CIRC_SPACE(head, tail, XMIT_SIZE) < n+2) { - warn("not enough space in xmit buffer to send new packet"); + dev_warn(&iforce->dev->dev, + "not enough space in xmit buffer to send new packet\n"); spin_unlock_irqrestore(&iforce->xmit_lock, flags); return -1; } @@ -150,7 +149,7 @@ static int mark_core_as_ready(struct iforce *iforce, unsigned short addr) return 0; } } - warn("unused effect %04x updated !!!", addr); + dev_warn(&iforce->dev->dev, "unused effect %04x updated !!!\n", addr); return -1; } @@ -161,7 +160,8 @@ void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data) static int being_used = 0; if (being_used) - warn("re-entrant call to iforce_process %d", being_used); + dev_warn(&iforce->dev->dev, + "re-entrant call to iforce_process %d\n", being_used); being_used++; #ifdef CONFIG_JOYSTICK_IFORCE_232 @@ -257,7 +257,8 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) status = usb_submit_urb(iforce->ctrl, GFP_ATOMIC); if (status) { - err("usb_submit_urb failed %d", status); + dev_err(&iforce->intf->dev, + "usb_submit_urb failed %d\n", status); return -1; } @@ -265,12 +266,14 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) iforce->ctrl->status != -EINPROGRESS, HZ); if (iforce->ctrl->status) { - dbg("iforce->ctrl->status = %d", iforce->ctrl->status); + dev_dbg(&iforce->intf->dev, + "iforce->ctrl->status = %d\n", + iforce->ctrl->status); usb_unlink_urb(iforce->ctrl); return -1; } #else - dbg("iforce_get_id_packet: iforce->bus = USB!"); + printk(KERN_DEBUG "iforce_get_id_packet: iforce->bus = USB!\n"); #endif } break; @@ -289,12 +292,15 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) return -1; } #else - err("iforce_get_id_packet: iforce->bus = SERIO!"); + dev_err(&iforce->dev->dev, + "iforce_get_id_packet: iforce->bus = SERIO!\n"); #endif break; default: - err("iforce_get_id_packet: iforce->bus = %d", iforce->bus); + dev_err(&iforce->dev->dev, + "iforce_get_id_packet: iforce->bus = %d\n", + iforce->bus); break; } diff --git a/drivers/input/joystick/iforce/iforce-serio.c b/drivers/input/joystick/iforce/iforce-serio.c index 7b4bc19cef2..46d5041d2d9 100644 --- a/drivers/input/joystick/iforce/iforce-serio.c +++ b/drivers/input/joystick/iforce/iforce-serio.c @@ -1,6 +1,4 @@ /* - * $Id: iforce-serio.c,v 1.4 2002/01/28 22:45:00 jdeneux Exp $ - * * Copyright (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz> * Copyright (c) 2001, 2007 Johann Deneux <johann.deneux@gmail.com> * diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 1457b73850e..d96aa27dfcd 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -1,6 +1,4 @@ /* - * $Id: iforce-usb.c,v 1.16 2002/06/09 11:08:04 jdeneux Exp $ - * * Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz> * Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com> * @@ -66,7 +64,7 @@ void iforce_usb_xmit(struct iforce *iforce) if ( (n=usb_submit_urb(iforce->out, GFP_ATOMIC)) ) { clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); - warn("usb_submit_urb failed %d\n", n); + dev_warn(&iforce->intf->dev, "usb_submit_urb failed %d\n", n); } /* The IFORCE_XMIT_RUNNING bit is not cleared here. That's intended. @@ -78,6 +76,7 @@ void iforce_usb_xmit(struct iforce *iforce) static void iforce_usb_irq(struct urb *urb) { struct iforce *iforce = urb->context; + struct device *dev = &iforce->intf->dev; int status; switch (urb->status) { @@ -88,11 +87,12 @@ static void iforce_usb_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __FUNCTION__, urb->status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - urb has status of: %d", __FUNCTION__, urb->status); + dev_dbg(dev, "%s - urb has status of: %d\n", + __func__, urb->status); goto exit; } @@ -102,8 +102,8 @@ static void iforce_usb_irq(struct urb *urb) exit: status = usb_submit_urb (urb, GFP_ATOMIC); if (status) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, status); + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", + __func__, status); } static void iforce_usb_out(struct urb *urb) @@ -111,7 +111,9 @@ static void iforce_usb_out(struct urb *urb) struct iforce *iforce = urb->context; if (urb->status) { - dbg("urb->status %d, exiting", urb->status); + clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); + dev_dbg(&iforce->intf->dev, "urb->status %d, exiting\n", + urb->status); return; } @@ -156,10 +158,11 @@ static int iforce_usb_probe(struct usb_interface *intf, iforce->bus = IFORCE_USB; iforce->usbdev = dev; + iforce->intf = intf; iforce->cr.bRequestType = USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE; iforce->cr.wIndex = 0; - iforce->cr.wLength = 16; + iforce->cr.wLength = cpu_to_le16(16); usb_fill_int_urb(iforce->irq, dev, usb_rcvintpipe(dev, epirq->bEndpointAddress), iforce->data, 16, iforce_usb_irq, iforce, epirq->bInterval); @@ -188,33 +191,19 @@ fail: return err; } -/* Called by iforce_delete() */ -void iforce_usb_delete(struct iforce* iforce) -{ - usb_kill_urb(iforce->irq); - usb_kill_urb(iforce->out); - usb_kill_urb(iforce->ctrl); - - usb_free_urb(iforce->irq); - usb_free_urb(iforce->out); - usb_free_urb(iforce->ctrl); -} - static void iforce_usb_disconnect(struct usb_interface *intf) { struct iforce *iforce = usb_get_intfdata(intf); - int open = 0; /* FIXME! iforce->dev.handle->open; */ usb_set_intfdata(intf, NULL); - if (iforce) { - iforce->usbdev = NULL; - input_unregister_device(iforce->dev); - if (!open) { - iforce_delete_device(iforce); - kfree(iforce); - } - } + input_unregister_device(iforce->dev); + + usb_free_urb(iforce->irq); + usb_free_urb(iforce->out); + usb_free_urb(iforce->ctrl); + + kfree(iforce); } static struct usb_device_id iforce_usb_ids [] = { @@ -225,7 +214,9 @@ static struct usb_device_id iforce_usb_ids [] = { { USB_DEVICE(0x05ef, 0x8884) }, /* AVB Mag Turbo Force */ { USB_DEVICE(0x05ef, 0x8888) }, /* AVB Top Shot FFB Racing Wheel */ { USB_DEVICE(0x061c, 0xc0a4) }, /* ACT LABS Force RS */ + { USB_DEVICE(0x061c, 0xc084) }, /* ACT LABS Force RS */ { USB_DEVICE(0x06f8, 0x0001) }, /* Guillemot Race Leader Force Feedback */ + { USB_DEVICE(0x06f8, 0x0003) }, /* Guillemot Jet Leader Force Feedback */ { USB_DEVICE(0x06f8, 0x0004) }, /* Guillemot Force Feedback Racing Wheel */ { USB_DEVICE(0x06f8, 0xa302) }, /* Guillemot Jet Leader 3D */ { } /* Terminating entry */ diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index a964a7cfd21..96ae4f5bd0e 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -1,6 +1,4 @@ /* - * $Id: iforce.h,v 1.13 2002/07/07 10:22:50 jdeneux Exp $ - * * Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz> * Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com> * @@ -31,7 +29,6 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/spinlock.h> #include <linux/usb.h> #include <linux/serio.h> @@ -117,6 +114,7 @@ struct iforce { #endif #ifdef CONFIG_JOYSTICK_IFORCE_USB struct usb_device *usbdev; /* USB transfer */ + struct usb_interface *intf; struct urb *irq, *out, *ctrl; struct usb_ctrlrequest cr; #endif @@ -152,11 +150,9 @@ void iforce_serial_xmit(struct iforce *iforce); /* iforce-usb.c */ void iforce_usb_xmit(struct iforce *iforce); -void iforce_usb_delete(struct iforce *iforce); /* iforce-main.c */ int iforce_init_device(struct iforce *iforce); -void iforce_delete_device(struct iforce *iforce); /* iforce-packets.c */ int iforce_control_playback(struct iforce*, u16 id, unsigned int); diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c index bc8ea95dfd0..17c2c800743 100644 --- a/drivers/input/joystick/interact.c +++ b/drivers/input/joystick/interact.c @@ -1,6 +1,4 @@ /* - * $Id: interact.c,v 1.16 2002/01/22 20:28:25 vojtech Exp $ - * * Copyright (c) 2001 Vojtech Pavlik * * Based on the work of: @@ -35,7 +33,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/gameport.h> #include <linux/input.h> #include <linux/jiffies.h> @@ -272,18 +269,14 @@ static int interact_connect(struct gameport *gameport, struct gameport_driver *d input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); for (i = 0; (t = interact_type[interact->type].abs[i]) >= 0; i++) { - set_bit(t, input_dev->absbit); - if (i < interact_type[interact->type].b8) { - input_dev->absmin[t] = 0; - input_dev->absmax[t] = 255; - } else { - input_dev->absmin[t] = -1; - input_dev->absmax[t] = 1; - } + if (i < interact_type[interact->type].b8) + input_set_abs_params(input_dev, t, 0, 255, 0, 0); + else + input_set_abs_params(input_dev, t, -1, 1, 0, 0); } for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++) - set_bit(t, input_dev->keybit); + __set_bit(t, input_dev->keybit); err = input_register_device(interact->dev); if (err) @@ -317,16 +310,4 @@ static struct gameport_driver interact_drv = { .disconnect = interact_disconnect, }; -static int __init interact_init(void) -{ - gameport_register_driver(&interact_drv); - return 0; -} - -static void __exit interact_exit(void) -{ - gameport_unregister_driver(&interact_drv); -} - -module_init(interact_init); -module_exit(interact_exit); +module_gameport_driver(interact_drv); diff --git a/drivers/input/joystick/joydump.c b/drivers/input/joystick/joydump.c index 88ec5a918f2..d1c6e4846a4 100644 --- a/drivers/input/joystick/joydump.c +++ b/drivers/input/joystick/joydump.c @@ -1,6 +1,4 @@ /* - * $Id: joydump.c,v 1.1 2002/01/23 06:56:16 jsimmons Exp $ - * * Copyright (c) 1996-2001 Vojtech Pavlik */ @@ -33,7 +31,6 @@ #include <linux/gameport.h> #include <linux/kernel.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/slab.h> #define DRIVER_DESC "Gameport data dumper module" @@ -161,16 +158,4 @@ static struct gameport_driver joydump_drv = { .disconnect = joydump_disconnect, }; -static int __init joydump_init(void) -{ - gameport_register_driver(&joydump_drv); - return 0; -} - -static void __exit joydump_exit(void) -{ - gameport_unregister_driver(&joydump_drv); -} - -module_init(joydump_init); -module_exit(joydump_exit); +module_gameport_driver(joydump_drv); diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c index 54e676948eb..c5358ba1f57 100644 --- a/drivers/input/joystick/magellan.c +++ b/drivers/input/joystick/magellan.c @@ -1,6 +1,4 @@ /* - * $Id: magellan.c,v 1.16 2002/01/22 20:28:39 vojtech Exp $ - * * Copyright (c) 1999-2001 Vojtech Pavlik */ @@ -33,7 +31,6 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/serio.h> -#include <linux/init.h> #define DRIVER_DESC "Magellan and SpaceMouse 6dof controller driver" @@ -224,19 +221,4 @@ static struct serio_driver magellan_drv = { .disconnect = magellan_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init magellan_init(void) -{ - return serio_register_driver(&magellan_drv); -} - -static void __exit magellan_exit(void) -{ - serio_unregister_driver(&magellan_drv); -} - -module_init(magellan_init); -module_exit(magellan_exit); +module_serio_driver(magellan_drv); diff --git a/drivers/input/joystick/maplecontrol.c b/drivers/input/joystick/maplecontrol.c new file mode 100644 index 00000000000..8aa6e4c497d --- /dev/null +++ b/drivers/input/joystick/maplecontrol.c @@ -0,0 +1,193 @@ +/* + * SEGA Dreamcast controller driver + * Based on drivers/usb/iforce.c + * + * Copyright Yaegashi Takeshi, 2001 + * Adrian McMenamin, 2008 - 2009 + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/maple.h> + +MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>"); +MODULE_DESCRIPTION("SEGA Dreamcast controller driver"); +MODULE_LICENSE("GPL"); + +struct dc_pad { + struct input_dev *dev; + struct maple_device *mdev; +}; + +static void dc_pad_callback(struct mapleq *mq) +{ + unsigned short buttons; + struct maple_device *mapledev = mq->dev; + struct dc_pad *pad = maple_get_drvdata(mapledev); + struct input_dev *dev = pad->dev; + unsigned char *res = mq->recvbuf->buf; + + buttons = ~le16_to_cpup((__le16 *)(res + 8)); + + input_report_abs(dev, ABS_HAT0Y, + (buttons & 0x0010 ? -1 : 0) + (buttons & 0x0020 ? 1 : 0)); + input_report_abs(dev, ABS_HAT0X, + (buttons & 0x0040 ? -1 : 0) + (buttons & 0x0080 ? 1 : 0)); + input_report_abs(dev, ABS_HAT1Y, + (buttons & 0x1000 ? -1 : 0) + (buttons & 0x2000 ? 1 : 0)); + input_report_abs(dev, ABS_HAT1X, + (buttons & 0x4000 ? -1 : 0) + (buttons & 0x8000 ? 1 : 0)); + + input_report_key(dev, BTN_C, buttons & 0x0001); + input_report_key(dev, BTN_B, buttons & 0x0002); + input_report_key(dev, BTN_A, buttons & 0x0004); + input_report_key(dev, BTN_START, buttons & 0x0008); + input_report_key(dev, BTN_Z, buttons & 0x0100); + input_report_key(dev, BTN_Y, buttons & 0x0200); + input_report_key(dev, BTN_X, buttons & 0x0400); + input_report_key(dev, BTN_SELECT, buttons & 0x0800); + + input_report_abs(dev, ABS_GAS, res[10]); + input_report_abs(dev, ABS_BRAKE, res[11]); + input_report_abs(dev, ABS_X, res[12]); + input_report_abs(dev, ABS_Y, res[13]); + input_report_abs(dev, ABS_RX, res[14]); + input_report_abs(dev, ABS_RY, res[15]); +} + +static int dc_pad_open(struct input_dev *dev) +{ + struct dc_pad *pad = dev_get_platdata(&dev->dev); + + maple_getcond_callback(pad->mdev, dc_pad_callback, HZ/20, + MAPLE_FUNC_CONTROLLER); + + return 0; +} + +static void dc_pad_close(struct input_dev *dev) +{ + struct dc_pad *pad = dev_get_platdata(&dev->dev); + + maple_getcond_callback(pad->mdev, dc_pad_callback, 0, + MAPLE_FUNC_CONTROLLER); +} + +/* allow the controller to be used */ +static int probe_maple_controller(struct device *dev) +{ + static const short btn_bit[32] = { + BTN_C, BTN_B, BTN_A, BTN_START, -1, -1, -1, -1, + BTN_Z, BTN_Y, BTN_X, BTN_SELECT, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + }; + + static const short abs_bit[32] = { + -1, -1, -1, -1, ABS_HAT0Y, ABS_HAT0Y, ABS_HAT0X, ABS_HAT0X, + -1, -1, -1, -1, ABS_HAT1Y, ABS_HAT1Y, ABS_HAT1X, ABS_HAT1X, + ABS_GAS, ABS_BRAKE, ABS_X, ABS_Y, ABS_RX, ABS_RY, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + }; + + struct maple_device *mdev = to_maple_dev(dev); + struct maple_driver *mdrv = to_maple_driver(dev->driver); + int i, error; + struct dc_pad *pad; + struct input_dev *idev; + unsigned long data = be32_to_cpu(mdev->devinfo.function_data[0]); + + pad = kzalloc(sizeof(struct dc_pad), GFP_KERNEL); + idev = input_allocate_device(); + if (!pad || !idev) { + error = -ENOMEM; + goto fail; + } + + pad->dev = idev; + pad->mdev = mdev; + + idev->open = dc_pad_open; + idev->close = dc_pad_close; + + for (i = 0; i < 32; i++) { + if (data & (1 << i)) { + if (btn_bit[i] >= 0) + __set_bit(btn_bit[i], idev->keybit); + else if (abs_bit[i] >= 0) + __set_bit(abs_bit[i], idev->absbit); + } + } + + if (idev->keybit[BIT_WORD(BTN_JOYSTICK)]) + idev->evbit[0] |= BIT_MASK(EV_KEY); + + if (idev->absbit[0]) + idev->evbit[0] |= BIT_MASK(EV_ABS); + + for (i = ABS_X; i <= ABS_BRAKE; i++) + input_set_abs_params(idev, i, 0, 255, 0, 0); + + for (i = ABS_HAT0X; i <= ABS_HAT3Y; i++) + input_set_abs_params(idev, i, 1, -1, 0, 0); + + idev->dev.platform_data = pad; + idev->dev.parent = &mdev->dev; + idev->name = mdev->product_name; + idev->id.bustype = BUS_HOST; + input_set_drvdata(idev, pad); + + error = input_register_device(idev); + if (error) + goto fail; + + mdev->driver = mdrv; + maple_set_drvdata(mdev, pad); + + return 0; + +fail: + input_free_device(idev); + kfree(pad); + maple_set_drvdata(mdev, NULL); + return error; +} + +static int remove_maple_controller(struct device *dev) +{ + struct maple_device *mdev = to_maple_dev(dev); + struct dc_pad *pad = maple_get_drvdata(mdev); + + mdev->callback = NULL; + input_unregister_device(pad->dev); + maple_set_drvdata(mdev, NULL); + kfree(pad); + + return 0; +} + +static struct maple_driver dc_pad_driver = { + .function = MAPLE_FUNC_CONTROLLER, + .drv = { + .name = "Dreamcast_controller", + .probe = probe_maple_controller, + .remove = remove_maple_controller, + }, +}; + +static int __init dc_pad_init(void) +{ + return maple_driver_register(&dc_pad_driver); +} + +static void __exit dc_pad_exit(void) +{ + maple_driver_unregister(&dc_pad_driver); +} + +module_init(dc_pad_init); +module_exit(dc_pad_exit); diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c index 7b4865fdee5..4a95b224169 100644 --- a/drivers/input/joystick/sidewinder.c +++ b/drivers/input/joystick/sidewinder.c @@ -30,7 +30,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> -#include <linux/init.h> #include <linux/input.h> #include <linux/gameport.h> #include <linux/jiffies.h> @@ -761,17 +760,21 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv) input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); for (j = 0; (bits = sw_bit[sw->type][j]); j++) { + int min, max, fuzz, flat; + code = sw_abs[sw->type][j]; - set_bit(code, input_dev->absbit); - input_dev->absmax[code] = (1 << bits) - 1; - input_dev->absmin[code] = (bits == 1) ? -1 : 0; - input_dev->absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0; - if (code != ABS_THROTTLE) - input_dev->absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0; + min = bits == 1 ? -1 : 0; + max = (1 << bits) - 1; + fuzz = (bits >> 1) >= 2 ? 1 << ((bits >> 1) - 2) : 0; + flat = code == ABS_THROTTLE || bits < 5 ? + 0 : 1 << (bits - 5); + + input_set_abs_params(input_dev, code, + min, max, fuzz, flat); } for (j = 0; (code = sw_btn[sw->type][j]); j++) - set_bit(code, input_dev->keybit); + __set_bit(code, input_dev->keybit); dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k); @@ -816,16 +819,4 @@ static struct gameport_driver sw_drv = { .disconnect = sw_disconnect, }; -static int __init sw_init(void) -{ - gameport_register_driver(&sw_drv); - return 0; -} - -static void __exit sw_exit(void) -{ - gameport_unregister_driver(&sw_drv); -} - -module_init(sw_init); -module_exit(sw_exit); +module_gameport_driver(sw_drv); diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c index d4087fd4965..f4445a4e8d6 100644 --- a/drivers/input/joystick/spaceball.c +++ b/drivers/input/joystick/spaceball.c @@ -1,6 +1,4 @@ /* - * $Id: spaceball.c,v 1.17 2002/01/22 20:29:03 vojtech Exp $ - * * Copyright (c) 1999-2001 Vojtech Pavlik * * Based on the work of: @@ -35,7 +33,6 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/input.h> #include <linux/serio.h> @@ -298,19 +295,4 @@ static struct serio_driver spaceball_drv = { .disconnect = spaceball_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init spaceball_init(void) -{ - return serio_register_driver(&spaceball_drv); -} - -static void __exit spaceball_exit(void) -{ - serio_unregister_driver(&spaceball_drv); -} - -module_init(spaceball_init); -module_exit(spaceball_exit); +module_serio_driver(spaceball_drv); diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c index f7ce4004f4b..f2667820e8c 100644 --- a/drivers/input/joystick/spaceorb.c +++ b/drivers/input/joystick/spaceorb.c @@ -1,6 +1,4 @@ /* - * $Id: spaceorb.c,v 1.15 2002/01/22 20:29:19 vojtech Exp $ - * * Copyright (c) 1999-2001 Vojtech Pavlik * * Based on the work of: @@ -34,7 +32,6 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/input.h> #include <linux/serio.h> @@ -239,19 +236,4 @@ static struct serio_driver spaceorb_drv = { .disconnect = spaceorb_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init spaceorb_init(void) -{ - return serio_register_driver(&spaceorb_drv); -} - -static void __exit spaceorb_exit(void) -{ - serio_unregister_driver(&spaceorb_drv); -} - -module_init(spaceorb_init); -module_exit(spaceorb_exit); +module_serio_driver(spaceorb_drv); diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c index baa10b2f7ba..099c6d7b5e0 100644 --- a/drivers/input/joystick/stinger.c +++ b/drivers/input/joystick/stinger.c @@ -1,6 +1,4 @@ /* - * $Id: stinger.c,v 1.10 2002/01/22 20:29:31 vojtech Exp $ - * * Copyright (c) 2000-2001 Vojtech Pavlik * Copyright (c) 2000 Mark Fletcher */ @@ -34,7 +32,6 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/serio.h> -#include <linux/init.h> #define DRIVER_DESC "Gravis Stinger gamepad driver" @@ -210,19 +207,4 @@ static struct serio_driver stinger_drv = { .disconnect = stinger_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init stinger_init(void) -{ - return serio_register_driver(&stinger_drv); -} - -static void __exit stinger_exit(void) -{ - serio_unregister_driver(&stinger_drv); -} - -module_init(stinger_init); -module_exit(stinger_exit); +module_serio_driver(stinger_drv); diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c index 0feeb8acb53..7e17cde464f 100644 --- a/drivers/input/joystick/tmdc.c +++ b/drivers/input/joystick/tmdc.c @@ -1,6 +1,4 @@ /* - * $Id: tmdc.c,v 1.31 2002/01/22 20:29:52 vojtech Exp $ - * * Copyright (c) 1998-2001 Vojtech Pavlik * * Based on the work of: @@ -35,7 +33,6 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/gameport.h> #include <linux/input.h> #include <linux/jiffies.h> @@ -438,16 +435,4 @@ static struct gameport_driver tmdc_drv = { .disconnect = tmdc_disconnect, }; -static int __init tmdc_init(void) -{ - gameport_register_driver(&tmdc_drv); - return 0; -} - -static void __exit tmdc_exit(void) -{ - gameport_unregister_driver(&tmdc_drv); -} - -module_init(tmdc_init); -module_exit(tmdc_exit); +module_gameport_driver(tmdc_drv); diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index 989483f5316..27b6a3ce18c 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -1,6 +1,4 @@ /* - * $Id: turbografx.c,v 1.14 2002/01/22 20:30:39 vojtech Exp $ - * * Copyright (c) 1998-2001 Vojtech Pavlik * * Based on the work of: @@ -37,6 +35,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/slab.h> MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); MODULE_DESCRIPTION("TurboGraFX parallel port interface driver"); @@ -246,6 +245,7 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs) goto err_free_tgfx; } + parport_put_port(pp); return tgfx; err_free_dev: diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c index 1085c841fec..7f7e5ab3f9e 100644 --- a/drivers/input/joystick/twidjoy.c +++ b/drivers/input/joystick/twidjoy.c @@ -1,8 +1,4 @@ /* - * $Id: twidjoy.c,v 1.5 2002/01/22 20:31:53 vojtech Exp $ - * - * derived from CVS-ID "stinger.c,v 1.5 2001/05/29 12:57:18 vojtech Exp" - * * Copyright (c) 2001 Arndt Schoenewald * Copyright (c) 2000-2001 Vojtech Pavlik * Copyright (c) 2000 Mark Fletcher @@ -56,7 +52,6 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/serio.h> -#include <linux/init.h> #define DRIVER_DESC "Handykey Twiddler keyboard as a joystick driver" @@ -261,19 +256,4 @@ static struct serio_driver twidjoy_drv = { .disconnect = twidjoy_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init twidjoy_init(void) -{ - return serio_register_driver(&twidjoy_drv); -} - -static void __exit twidjoy_exit(void) -{ - serio_unregister_driver(&twidjoy_drv); -} - -module_init(twidjoy_init); -module_exit(twidjoy_exit); +module_serio_driver(twidjoy_drv); diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c new file mode 100644 index 00000000000..b76ac580703 --- /dev/null +++ b/drivers/input/joystick/walkera0701.c @@ -0,0 +1,303 @@ +/* + * Parallel port to Walkera WK-0701 TX joystick + * + * Copyright (c) 2008 Peter Popovec + * + * More about driver: <file:Documentation/input/walkera0701.txt> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define RESERVE 20000 +#define SYNC_PULSE 1306000 +#define BIN0_PULSE 288000 +#define BIN1_PULSE 438000 + +#define ANALOG_MIN_PULSE 318000 +#define ANALOG_MAX_PULSE 878000 +#define ANALOG_DELTA 80000 + +#define BIN_SAMPLE ((BIN0_PULSE + BIN1_PULSE) / 2) + +#define NO_SYNC 25 + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/parport.h> +#include <linux/input.h> +#include <linux/hrtimer.h> + +MODULE_AUTHOR("Peter Popovec <popovec@fei.tuke.sk>"); +MODULE_DESCRIPTION("Walkera WK-0701 TX as joystick"); +MODULE_LICENSE("GPL"); + +static unsigned int walkera0701_pp_no; +module_param_named(port, walkera0701_pp_no, int, 0); +MODULE_PARM_DESC(port, + "Parallel port adapter for Walkera WK-0701 TX (default is 0)"); + +/* + * For now, only one device is supported, if somebody need more devices, code + * can be expanded, one struct walkera_dev per device must be allocated and + * set up by walkera0701_connect (release of device by walkera0701_disconnect) + */ + +struct walkera_dev { + unsigned char buf[25]; + u64 irq_time, irq_lasttime; + int counter; + int ack; + + struct input_dev *input_dev; + struct hrtimer timer; + + struct parport *parport; + struct pardevice *pardevice; +}; + +static struct walkera_dev w_dev; + +static inline void walkera0701_parse_frame(struct walkera_dev *w) +{ + int i; + int val1, val2, val3, val4, val5, val6, val7, val8; + int magic, magic_bit; + int crc1, crc2; + + for (crc1 = crc2 = i = 0; i < 10; i++) { + crc1 += w->buf[i] & 7; + crc2 += (w->buf[i] & 8) >> 3; + } + if ((w->buf[10] & 7) != (crc1 & 7)) + return; + if (((w->buf[10] & 8) >> 3) != (((crc1 >> 3) + crc2) & 1)) + return; + for (crc1 = crc2 = 0, i = 11; i < 23; i++) { + crc1 += w->buf[i] & 7; + crc2 += (w->buf[i] & 8) >> 3; + } + if ((w->buf[23] & 7) != (crc1 & 7)) + return; + if (((w->buf[23] & 8) >> 3) != (((crc1 >> 3) + crc2) & 1)) + return; + val1 = ((w->buf[0] & 7) * 256 + w->buf[1] * 16 + w->buf[2]) >> 2; + val1 *= ((w->buf[0] >> 2) & 2) - 1; /* sign */ + val2 = (w->buf[2] & 1) << 8 | (w->buf[3] << 4) | w->buf[4]; + val2 *= (w->buf[2] & 2) - 1; /* sign */ + val3 = ((w->buf[5] & 7) * 256 + w->buf[6] * 16 + w->buf[7]) >> 2; + val3 *= ((w->buf[5] >> 2) & 2) - 1; /* sign */ + val4 = (w->buf[7] & 1) << 8 | (w->buf[8] << 4) | w->buf[9]; + val4 *= (w->buf[7] & 2) - 1; /* sign */ + val5 = ((w->buf[11] & 7) * 256 + w->buf[12] * 16 + w->buf[13]) >> 2; + val5 *= ((w->buf[11] >> 2) & 2) - 1; /* sign */ + val6 = (w->buf[13] & 1) << 8 | (w->buf[14] << 4) | w->buf[15]; + val6 *= (w->buf[13] & 2) - 1; /* sign */ + val7 = ((w->buf[16] & 7) * 256 + w->buf[17] * 16 + w->buf[18]) >> 2; + val7 *= ((w->buf[16] >> 2) & 2) - 1; /*sign */ + val8 = (w->buf[18] & 1) << 8 | (w->buf[19] << 4) | w->buf[20]; + val8 *= (w->buf[18] & 2) - 1; /*sign */ + + magic = (w->buf[21] << 4) | w->buf[22]; + magic_bit = (w->buf[24] & 8) >> 3; + pr_debug("%4d %4d %4d %4d %4d %4d %4d %4d (magic %2x %d)\n", + val1, val2, val3, val4, val5, val6, val7, val8, + magic, magic_bit); + + input_report_abs(w->input_dev, ABS_X, val2); + input_report_abs(w->input_dev, ABS_Y, val1); + input_report_abs(w->input_dev, ABS_Z, val6); + input_report_abs(w->input_dev, ABS_THROTTLE, val3); + input_report_abs(w->input_dev, ABS_RUDDER, val4); + input_report_abs(w->input_dev, ABS_MISC, val7); + input_report_key(w->input_dev, BTN_GEAR_DOWN, val5 > 0); +} + +static inline int read_ack(struct pardevice *p) +{ + return parport_read_status(p->port) & 0x40; +} + +/* falling edge, prepare to BIN value calculation */ +static void walkera0701_irq_handler(void *handler_data) +{ + u64 pulse_time; + struct walkera_dev *w = handler_data; + + w->irq_time = ktime_to_ns(ktime_get()); + pulse_time = w->irq_time - w->irq_lasttime; + w->irq_lasttime = w->irq_time; + + /* cancel timer, if in handler or active do resync */ + if (unlikely(0 != hrtimer_try_to_cancel(&w->timer))) { + w->counter = NO_SYNC; + return; + } + + if (w->counter < NO_SYNC) { + if (w->ack) { + pulse_time -= BIN1_PULSE; + w->buf[w->counter] = 8; + } else { + pulse_time -= BIN0_PULSE; + w->buf[w->counter] = 0; + } + if (w->counter == 24) { /* full frame */ + walkera0701_parse_frame(w); + w->counter = NO_SYNC; + if (abs(pulse_time - SYNC_PULSE) < RESERVE) /* new frame sync */ + w->counter = 0; + } else { + if ((pulse_time > (ANALOG_MIN_PULSE - RESERVE) + && (pulse_time < (ANALOG_MAX_PULSE + RESERVE)))) { + pulse_time -= (ANALOG_MIN_PULSE - RESERVE); + pulse_time = (u32) pulse_time / ANALOG_DELTA; /* overtiping is safe, pulsetime < s32.. */ + w->buf[w->counter++] |= (pulse_time & 7); + } else + w->counter = NO_SYNC; + } + } else if (abs(pulse_time - SYNC_PULSE - BIN0_PULSE) < + RESERVE + BIN1_PULSE - BIN0_PULSE) /* frame sync .. */ + w->counter = 0; + + hrtimer_start(&w->timer, ktime_set(0, BIN_SAMPLE), HRTIMER_MODE_REL); +} + +static enum hrtimer_restart timer_handler(struct hrtimer + *handle) +{ + struct walkera_dev *w; + + w = container_of(handle, struct walkera_dev, timer); + w->ack = read_ack(w->pardevice); + + return HRTIMER_NORESTART; +} + +static int walkera0701_open(struct input_dev *dev) +{ + struct walkera_dev *w = input_get_drvdata(dev); + + if (parport_claim(w->pardevice)) + return -EBUSY; + + parport_enable_irq(w->parport); + return 0; +} + +static void walkera0701_close(struct input_dev *dev) +{ + struct walkera_dev *w = input_get_drvdata(dev); + + parport_disable_irq(w->parport); + hrtimer_cancel(&w->timer); + + parport_release(w->pardevice); +} + +static int walkera0701_connect(struct walkera_dev *w, int parport) +{ + int error; + + w->parport = parport_find_number(parport); + if (!w->parport) { + pr_err("parport %d does not exist\n", parport); + return -ENODEV; + } + + if (w->parport->irq == -1) { + pr_err("parport %d does not have interrupt assigned\n", + parport); + error = -EINVAL; + goto err_put_parport; + } + + w->pardevice = parport_register_device(w->parport, "walkera0701", + NULL, NULL, walkera0701_irq_handler, + PARPORT_DEV_EXCL, w); + if (!w->pardevice) { + pr_err("failed to register parport device\n"); + error = -EIO; + goto err_put_parport; + } + + if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT)) { + pr_err("failed to negotiate parport mode\n"); + error = -EIO; + goto err_unregister_device; + } + + hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + w->timer.function = timer_handler; + + w->input_dev = input_allocate_device(); + if (!w->input_dev) { + pr_err("failed to allocate input device\n"); + error = -ENOMEM; + goto err_unregister_device; + } + + input_set_drvdata(w->input_dev, w); + w->input_dev->name = "Walkera WK-0701 TX"; + w->input_dev->phys = w->parport->name; + w->input_dev->id.bustype = BUS_PARPORT; + + /* TODO what id vendor/product/version ? */ + w->input_dev->id.vendor = 0x0001; + w->input_dev->id.product = 0x0001; + w->input_dev->id.version = 0x0100; + w->input_dev->dev.parent = w->parport->dev; + w->input_dev->open = walkera0701_open; + w->input_dev->close = walkera0701_close; + + w->input_dev->evbit[0] = BIT(EV_ABS) | BIT_MASK(EV_KEY); + w->input_dev->keybit[BIT_WORD(BTN_GEAR_DOWN)] = BIT_MASK(BTN_GEAR_DOWN); + + input_set_abs_params(w->input_dev, ABS_X, -512, 512, 0, 0); + input_set_abs_params(w->input_dev, ABS_Y, -512, 512, 0, 0); + input_set_abs_params(w->input_dev, ABS_Z, -512, 512, 0, 0); + input_set_abs_params(w->input_dev, ABS_THROTTLE, -512, 512, 0, 0); + input_set_abs_params(w->input_dev, ABS_RUDDER, -512, 512, 0, 0); + input_set_abs_params(w->input_dev, ABS_MISC, -512, 512, 0, 0); + + error = input_register_device(w->input_dev); + if (error) { + pr_err("failed to register input device\n"); + goto err_free_input_dev; + } + + return 0; + +err_free_input_dev: + input_free_device(w->input_dev); +err_unregister_device: + parport_unregister_device(w->pardevice); +err_put_parport: + parport_put_port(w->parport); + return error; +} + +static void walkera0701_disconnect(struct walkera_dev *w) +{ + input_unregister_device(w->input_dev); + parport_unregister_device(w->pardevice); + parport_put_port(w->parport); +} + +static int __init walkera0701_init(void) +{ + return walkera0701_connect(&w_dev, walkera0701_pp_no); +} + +static void __exit walkera0701_exit(void) +{ + walkera0701_disconnect(&w_dev); +} + +module_init(walkera0701_init); +module_exit(walkera0701_exit); diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c index e928b6e3724..e13a9144a25 100644 --- a/drivers/input/joystick/warrior.c +++ b/drivers/input/joystick/warrior.c @@ -1,6 +1,4 @@ /* - * $Id: warrior.c,v 1.14 2002/01/22 20:32:10 vojtech Exp $ - * * Copyright (c) 1999-2001 Vojtech Pavlik */ @@ -33,7 +31,6 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/serio.h> -#include <linux/init.h> #define DRIVER_DESC "Logitech WingMan Warrior joystick driver" @@ -219,19 +216,4 @@ static struct serio_driver warrior_drv = { .disconnect = warrior_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init warrior_init(void) -{ - return serio_register_driver(&warrior_drv); -} - -static void __exit warrior_exit(void) -{ - serio_unregister_driver(&warrior_drv); -} - -module_init(warrior_init); -module_exit(warrior_exit); +module_serio_driver(warrior_drv); diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 0380597249b..603fe0dd368 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1,5 +1,5 @@ /* - * X-Box gamepad - v0.0.6 + * X-Box gamepad driver * * Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de> * 2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>, @@ -9,6 +9,7 @@ * 2005 Dominic Cerquetti <binary1230@yahoo.com> * 2006 Adam Buchbinder <adam.buchbinder@gmail.com> * 2007 Jan Kratochvil <honza@jikos.cz> + * 2010 Christoph Fritz <chf.fritz@googlemail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -68,16 +69,16 @@ * - dance pads will map D-PAD to buttons, not axes * - pass the module paramater 'dpad_to_buttons' to force * the D-PAD to map to buttons if your pad is not detected + * + * Later changes can be tracked in SCM. */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/stat.h> #include <linux/module.h> #include <linux/usb/input.h> -#define DRIVER_VERSION "v0.0.6" #define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>" #define DRIVER_DESC "X-Box pad driver" @@ -85,75 +86,127 @@ /* xbox d-pads should map to buttons, as is required for DDR pads but we map them to axes when possible to simplify things */ -#define MAP_DPAD_TO_BUTTONS 0 -#define MAP_DPAD_TO_AXES 1 -#define MAP_DPAD_UNKNOWN -1 +#define MAP_DPAD_TO_BUTTONS (1 << 0) +#define MAP_TRIGGERS_TO_BUTTONS (1 << 1) +#define MAP_STICKS_TO_NULL (1 << 2) +#define DANCEPAD_MAP_CONFIG (MAP_DPAD_TO_BUTTONS | \ + MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL) #define XTYPE_XBOX 0 #define XTYPE_XBOX360 1 +#define XTYPE_XBOX360W 2 +#define XTYPE_UNKNOWN 3 -static int dpad_to_buttons; +static bool dpad_to_buttons; module_param(dpad_to_buttons, bool, S_IRUGO); MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads"); +static bool triggers_to_buttons; +module_param(triggers_to_buttons, bool, S_IRUGO); +MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads"); + +static bool sticks_to_null; +module_param(sticks_to_null, bool, S_IRUGO); +MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads"); + static const struct xpad_device { u16 idVendor; u16 idProduct; char *name; - u8 dpad_mapping; + u8 mapping; u8 xtype; } xpad_device[] = { - { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, - { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX }, + { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX }, + { 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX }, + { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX }, + { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 }, + { 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, + { 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, + { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, + { 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 }, + { 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 }, + { 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 }, + { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX }, + { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX }, + { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX }, + { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX }, + { 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX }, + { 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX }, + { 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX }, + { 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX }, { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, - { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, + { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX }, + { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, + { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, - { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, - { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 }, + { 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX }, + { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX }, + { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX }, + { 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX }, + { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX }, + { 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX }, + { 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX }, + { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX }, + { 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX }, + { 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX }, + { 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX }, + { 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX }, + { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX }, + { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX }, + { 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 }, { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, - { 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, - { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, - { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_XBOX } + { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 }, + { 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 }, + { 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 }, + { 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 }, + { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 }, + { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, + { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN } }; -static const signed short xpad_btn[] = { - BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, /* "analog" buttons */ - BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */ +/* buttons shared with xbox and xbox360 */ +static const signed short xpad_common_btn[] = { + BTN_A, BTN_B, BTN_X, BTN_Y, /* "analog" buttons */ + BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */ -1 /* terminating entry */ }; -/* only used if MAP_DPAD_TO_BUTTONS */ +/* original xbox controllers only */ +static const signed short xpad_btn[] = { + BTN_C, BTN_Z, /* "analog" buttons */ + -1 /* terminating entry */ +}; + +/* used when dpad is mapped to buttons */ static const signed short xpad_btn_pad[] = { - BTN_LEFT, BTN_RIGHT, /* d-pad left, right */ - BTN_0, BTN_1, /* d-pad up, down (XXX names??) */ + BTN_TRIGGER_HAPPY1, BTN_TRIGGER_HAPPY2, /* d-pad left, right */ + BTN_TRIGGER_HAPPY3, BTN_TRIGGER_HAPPY4, /* d-pad up, down */ -1 /* terminating entry */ }; +/* used when triggers are mapped to buttons */ +static const signed short xpad_btn_triggers[] = { + BTN_TL2, BTN_TR2, /* triggers left/right */ + -1 +}; + + static const signed short xpad360_btn[] = { /* buttons for x360 controller */ BTN_TL, BTN_TR, /* Button LB/RB */ BTN_MODE, /* The big X button */ @@ -163,35 +216,68 @@ static const signed short xpad360_btn[] = { /* buttons for x360 controller */ static const signed short xpad_abs[] = { ABS_X, ABS_Y, /* left stick */ ABS_RX, ABS_RY, /* right stick */ - ABS_Z, ABS_RZ, /* triggers left/right */ -1 /* terminating entry */ }; -/* only used if MAP_DPAD_TO_AXES */ +/* used when dpad is mapped to axes */ static const signed short xpad_abs_pad[] = { ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */ -1 /* terminating entry */ }; -/* Xbox 360 has a vendor-specific (sub)class, so we cannot match it with only - * USB_INTERFACE_INFO, more to that this device has 4 InterfaceProtocols, - * but we need only one of them. */ -static struct usb_device_id xpad_table [] = { +/* used when triggers are mapped to axes */ +static const signed short xpad_abs_triggers[] = { + ABS_Z, ABS_RZ, /* triggers left/right */ + -1 +}; + +/* Xbox 360 has a vendor-specific class, so we cannot match it with only + * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we + * match against vendor id as well. Wired Xbox 360 devices have protocol 1, + * wireless controllers have protocol 129. */ +#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \ + .idVendor = (vend), \ + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, \ + .bInterfaceSubClass = 93, \ + .bInterfaceProtocol = (pr) +#define XPAD_XBOX360_VENDOR(vend) \ + { XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \ + { XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) } + +static struct usb_device_id xpad_table[] = { { USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */ - { USB_DEVICE_INTERFACE_PROTOCOL(0x045e, 0x028e, 1) }, /* X-Box 360 controller */ + XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */ + XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */ + XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */ + { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */ + XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */ + XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */ + XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */ + XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */ + XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */ + XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ + XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */ + XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */ { } }; -MODULE_DEVICE_TABLE (usb, xpad_table); +MODULE_DEVICE_TABLE(usb, xpad_table); struct usb_xpad { struct input_dev *dev; /* input device interface */ struct usb_device *udev; /* usb device */ + struct usb_interface *intf; /* usb interface */ + + int pad_present; struct urb *irq_in; /* urb for interrupt in report */ unsigned char *idata; /* input data */ dma_addr_t idata_dma; + struct urb *bulk_out; + unsigned char *bdata; + #if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS) struct urb *irq_out; /* urb for interrupt out report */ unsigned char *odata; /* output data */ @@ -205,7 +291,7 @@ struct usb_xpad { char phys[64]; /* physical device path */ - int dpad_mapping; /* map d-pad to buttons or to axes */ + int mapping; /* map d-pad to buttons or to axes */ int xtype; /* type of xbox device */ }; @@ -223,38 +309,46 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d { struct input_dev *dev = xpad->dev; - /* left stick */ - input_report_abs(dev, ABS_X, - (__s16) le16_to_cpup((__le16 *)(data + 12))); - input_report_abs(dev, ABS_Y, - (__s16) le16_to_cpup((__le16 *)(data + 14))); - - /* right stick */ - input_report_abs(dev, ABS_RX, - (__s16) le16_to_cpup((__le16 *)(data + 16))); - input_report_abs(dev, ABS_RY, - (__s16) le16_to_cpup((__le16 *)(data + 18))); + if (!(xpad->mapping & MAP_STICKS_TO_NULL)) { + /* left stick */ + input_report_abs(dev, ABS_X, + (__s16) le16_to_cpup((__le16 *)(data + 12))); + input_report_abs(dev, ABS_Y, + ~(__s16) le16_to_cpup((__le16 *)(data + 14))); + + /* right stick */ + input_report_abs(dev, ABS_RX, + (__s16) le16_to_cpup((__le16 *)(data + 16))); + input_report_abs(dev, ABS_RY, + ~(__s16) le16_to_cpup((__le16 *)(data + 18))); + } /* triggers left/right */ - input_report_abs(dev, ABS_Z, data[10]); - input_report_abs(dev, ABS_RZ, data[11]); + if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) { + input_report_key(dev, BTN_TL2, data[10]); + input_report_key(dev, BTN_TR2, data[11]); + } else { + input_report_abs(dev, ABS_Z, data[10]); + input_report_abs(dev, ABS_RZ, data[11]); + } /* digital pad */ - if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) { + if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { + /* dpad as buttons (left, right, up, down) */ + input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & 0x04); + input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08); + input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01); + input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02); + } else { input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); - } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ { - input_report_key(dev, BTN_LEFT, data[2] & 0x04); - input_report_key(dev, BTN_RIGHT, data[2] & 0x08); - input_report_key(dev, BTN_0, data[2] & 0x01); /* up */ - input_report_key(dev, BTN_1, data[2] & 0x02); /* down */ } /* start/back buttons and stick press left/right */ input_report_key(dev, BTN_START, data[2] & 0x10); - input_report_key(dev, BTN_BACK, data[2] & 0x20); + input_report_key(dev, BTN_SELECT, data[2] & 0x20); input_report_key(dev, BTN_THUMBL, data[2] & 0x40); input_report_key(dev, BTN_THUMBR, data[2] & 0x80); @@ -287,22 +381,22 @@ static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev = xpad->dev; /* digital pad */ - if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) { + if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { + /* dpad as buttons (left, right, up, down) */ + input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & 0x04); + input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08); + input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01); + input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02); + } else { input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); - } else if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) { - /* dpad as buttons (right, left, down, up) */ - input_report_key(dev, BTN_LEFT, data[2] & 0x04); - input_report_key(dev, BTN_RIGHT, data[2] & 0x08); - input_report_key(dev, BTN_0, data[2] & 0x01); /* up */ - input_report_key(dev, BTN_1, data[2] & 0x02); /* down */ } /* start/back buttons */ input_report_key(dev, BTN_START, data[2] & 0x10); - input_report_key(dev, BTN_BACK, data[2] & 0x20); + input_report_key(dev, BTN_SELECT, data[2] & 0x20); /* stick press left/right */ input_report_key(dev, BTN_THUMBL, data[2] & 0x40); @@ -317,31 +411,74 @@ static void xpad360_process_packet(struct usb_xpad *xpad, input_report_key(dev, BTN_TR, data[3] & 0x02); input_report_key(dev, BTN_MODE, data[3] & 0x04); - /* left stick */ - input_report_abs(dev, ABS_X, - (__s16) le16_to_cpup((__le16 *)(data + 6))); - input_report_abs(dev, ABS_Y, - (__s16) le16_to_cpup((__le16 *)(data + 8))); - - /* right stick */ - input_report_abs(dev, ABS_RX, - (__s16) le16_to_cpup((__le16 *)(data + 10))); - input_report_abs(dev, ABS_RY, - (__s16) le16_to_cpup((__le16 *)(data + 12))); + if (!(xpad->mapping & MAP_STICKS_TO_NULL)) { + /* left stick */ + input_report_abs(dev, ABS_X, + (__s16) le16_to_cpup((__le16 *)(data + 6))); + input_report_abs(dev, ABS_Y, + ~(__s16) le16_to_cpup((__le16 *)(data + 8))); + + /* right stick */ + input_report_abs(dev, ABS_RX, + (__s16) le16_to_cpup((__le16 *)(data + 10))); + input_report_abs(dev, ABS_RY, + ~(__s16) le16_to_cpup((__le16 *)(data + 12))); + } /* triggers left/right */ - input_report_abs(dev, ABS_Z, data[4]); - input_report_abs(dev, ABS_RZ, data[5]); + if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) { + input_report_key(dev, BTN_TL2, data[4]); + input_report_key(dev, BTN_TR2, data[5]); + } else { + input_report_abs(dev, ABS_Z, data[4]); + input_report_abs(dev, ABS_RZ, data[5]); + } input_sync(dev); } +/* + * xpad360w_process_packet + * + * Completes a request by converting the data into events for the + * input subsystem. It is version for xbox 360 wireless controller. + * + * Byte.Bit + * 00.1 - Status change: The controller or headset has connected/disconnected + * Bits 01.7 and 01.6 are valid + * 01.7 - Controller present + * 01.6 - Headset present + * 01.1 - Pad state (Bytes 4+) valid + * + */ + +static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) +{ + /* Presence change */ + if (data[0] & 0x08) { + if (data[1] & 0x80) { + xpad->pad_present = 1; + usb_submit_urb(xpad->bulk_out, GFP_ATOMIC); + } else + xpad->pad_present = 0; + } + + /* Valid pad data */ + if (!(data[1] & 0x1)) + return; + + xpad360_process_packet(xpad, cmd, &data[4]); +} + static void xpad_irq_in(struct urb *urb) { struct usb_xpad *xpad = urb->context; - int retval; + struct device *dev = &xpad->intf->dev; + int retval, status; - switch (urb->status) { + status = urb->status; + + switch (status) { case 0: /* success */ break; @@ -349,74 +486,112 @@ static void xpad_irq_in(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __FUNCTION__, urb->status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __FUNCTION__, urb->status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } - if (xpad->xtype == XTYPE_XBOX360) + switch (xpad->xtype) { + case XTYPE_XBOX360: xpad360_process_packet(xpad, 0, xpad->idata); - else + break; + case XTYPE_XBOX360W: + xpad360w_process_packet(xpad, 0, xpad->idata); + break; + default: xpad_process_packet(xpad, 0, xpad->idata); + } exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", + __func__, retval); } -#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS) -static void xpad_irq_out(struct urb *urb) +static void xpad_bulk_out(struct urb *urb) { - int retval; + struct usb_xpad *xpad = urb->context; + struct device *dev = &xpad->intf->dev; switch (urb->status) { - case 0: + case 0: /* success */ break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", - __FUNCTION__, urb->status); - goto exit; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); + break; + default: + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); + } +} + +#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS) +static void xpad_irq_out(struct urb *urb) +{ + struct usb_xpad *xpad = urb->context; + struct device *dev = &xpad->intf->dev; + int retval, status; + + status = urb->status; + + switch (status) { + case 0: + /* success */ + return; + + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + + default: + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; } exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", + __func__, retval); } static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) { struct usb_endpoint_descriptor *ep_irq_out; - int error = -ENOMEM; + int error; - if (xpad->xtype != XTYPE_XBOX360) + if (xpad->xtype == XTYPE_UNKNOWN) return 0; - xpad->odata = usb_buffer_alloc(xpad->udev, XPAD_PKT_LEN, - GFP_ATOMIC, &xpad->odata_dma ); - if (!xpad->odata) + xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN, + GFP_KERNEL, &xpad->odata_dma); + if (!xpad->odata) { + error = -ENOMEM; goto fail1; + } mutex_init(&xpad->odata_mutex); xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL); - if (!xpad->irq_out) + if (!xpad->irq_out) { + error = -ENOMEM; goto fail2; + } ep_irq_out = &intf->cur_altsetting->endpoint[1].desc; usb_fill_int_urb(xpad->irq_out, xpad->udev, @@ -428,21 +603,21 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) return 0; - fail2: usb_buffer_free(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); + fail2: usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); fail1: return error; } static void xpad_stop_output(struct usb_xpad *xpad) { - if (xpad->xtype == XTYPE_XBOX360) + if (xpad->xtype != XTYPE_UNKNOWN) usb_kill_urb(xpad->irq_out); } static void xpad_deinit_output(struct usb_xpad *xpad) { - if (xpad->xtype == XTYPE_XBOX360) { + if (xpad->xtype != XTYPE_UNKNOWN) { usb_free_urb(xpad->irq_out); - usb_buffer_free(xpad->udev, XPAD_PKT_LEN, + usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); } } @@ -453,23 +628,63 @@ static void xpad_stop_output(struct usb_xpad *xpad) {} #endif #ifdef CONFIG_JOYSTICK_XPAD_FF -static int xpad_play_effect(struct input_dev *dev, void *data, - struct ff_effect *effect) +static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) { struct usb_xpad *xpad = input_get_drvdata(dev); if (effect->type == FF_RUMBLE) { __u16 strong = effect->u.rumble.strong_magnitude; __u16 weak = effect->u.rumble.weak_magnitude; - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x08; - xpad->odata[2] = 0x00; - xpad->odata[3] = strong / 256; - xpad->odata[4] = weak / 256; - xpad->odata[5] = 0x00; - xpad->odata[6] = 0x00; - xpad->odata[7] = 0x00; - usb_submit_urb(xpad->irq_out, GFP_KERNEL); + + switch (xpad->xtype) { + + case XTYPE_XBOX: + xpad->odata[0] = 0x00; + xpad->odata[1] = 0x06; + xpad->odata[2] = 0x00; + xpad->odata[3] = strong / 256; /* left actuator */ + xpad->odata[4] = 0x00; + xpad->odata[5] = weak / 256; /* right actuator */ + xpad->irq_out->transfer_buffer_length = 6; + + return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + + case XTYPE_XBOX360: + xpad->odata[0] = 0x00; + xpad->odata[1] = 0x08; + xpad->odata[2] = 0x00; + xpad->odata[3] = strong / 256; /* left actuator? */ + xpad->odata[4] = weak / 256; /* right actuator? */ + xpad->odata[5] = 0x00; + xpad->odata[6] = 0x00; + xpad->odata[7] = 0x00; + xpad->irq_out->transfer_buffer_length = 8; + + return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + + case XTYPE_XBOX360W: + xpad->odata[0] = 0x00; + xpad->odata[1] = 0x01; + xpad->odata[2] = 0x0F; + xpad->odata[3] = 0xC0; + xpad->odata[4] = 0x00; + xpad->odata[5] = strong / 256; + xpad->odata[6] = weak / 256; + xpad->odata[7] = 0x00; + xpad->odata[8] = 0x00; + xpad->odata[9] = 0x00; + xpad->odata[10] = 0x00; + xpad->odata[11] = 0x00; + xpad->irq_out->transfer_buffer_length = 12; + + return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + + default: + dev_dbg(&xpad->dev->dev, + "%s - rumble command sent to unsupported xpad type: %d\n", + __func__, xpad->xtype); + return -1; + } } return 0; @@ -477,6 +692,9 @@ static int xpad_play_effect(struct input_dev *dev, void *data, static int xpad_init_ff(struct usb_xpad *xpad) { + if (xpad->xtype == XTYPE_UNKNOWN) + return 0; + input_set_capability(xpad->dev, EV_FF, FF_RUMBLE); return input_ff_create_memless(xpad->dev, NULL, xpad_play_effect); @@ -502,6 +720,7 @@ static void xpad_send_led_command(struct usb_xpad *xpad, int command) xpad->odata[0] = 0x01; xpad->odata[1] = 0x03; xpad->odata[2] = command; + xpad->irq_out->transfer_buffer_length = 3; usb_submit_urb(xpad->irq_out, GFP_KERNEL); mutex_unlock(&xpad->odata_mutex); } @@ -561,7 +780,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad) if (xpad_led) { led_classdev_unregister(&xpad_led->led_cdev); - kfree(xpad_led->name); + kfree(xpad_led); } } #else @@ -574,6 +793,10 @@ static int xpad_open(struct input_dev *dev) { struct usb_xpad *xpad = input_get_drvdata(dev); + /* URB was submitted in probe */ + if (xpad->xtype == XTYPE_XBOX360W) + return 0; + xpad->irq_in->dev = xpad->udev; if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) return -EIO; @@ -585,7 +808,9 @@ static void xpad_close(struct input_dev *dev) { struct usb_xpad *xpad = input_get_drvdata(dev); - usb_kill_urb(xpad->irq_in); + if (xpad->xtype != XTYPE_XBOX360W) + usb_kill_urb(xpad->irq_in); + xpad_stop_output(xpad); } @@ -601,11 +826,11 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128); break; case ABS_Z: - case ABS_RZ: /* the triggers */ + case ABS_RZ: /* the triggers (if mapped to axes) */ input_set_abs_params(input_dev, abs, 0, 255, 0, 0); break; case ABS_HAT0X: - case ABS_HAT0Y: /* the d-pad (only if MAP_DPAD_TO_AXES) */ + case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */ input_set_abs_params(input_dev, abs, -1, 1, 0, 0); break; } @@ -617,8 +842,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id struct usb_xpad *xpad; struct input_dev *input_dev; struct usb_endpoint_descriptor *ep_irq_in; - int i; - int error = -ENOMEM; + int i, error; for (i = 0; xpad_device[i].idVendor; i++) { if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) && @@ -628,23 +852,46 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); input_dev = input_allocate_device(); - if (!xpad || !input_dev) + if (!xpad || !input_dev) { + error = -ENOMEM; goto fail1; + } - xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN, - GFP_ATOMIC, &xpad->idata_dma); - if (!xpad->idata) + xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN, + GFP_KERNEL, &xpad->idata_dma); + if (!xpad->idata) { + error = -ENOMEM; goto fail1; + } xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL); - if (!xpad->irq_in) + if (!xpad->irq_in) { + error = -ENOMEM; goto fail2; + } xpad->udev = udev; - xpad->dpad_mapping = xpad_device[i].dpad_mapping; + xpad->intf = intf; + xpad->mapping = xpad_device[i].mapping; xpad->xtype = xpad_device[i].xtype; - if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN) - xpad->dpad_mapping = dpad_to_buttons; + + if (xpad->xtype == XTYPE_UNKNOWN) { + if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) { + if (intf->cur_altsetting->desc.bInterfaceProtocol == 129) + xpad->xtype = XTYPE_XBOX360W; + else + xpad->xtype = XTYPE_XBOX360; + } else + xpad->xtype = XTYPE_XBOX; + + if (dpad_to_buttons) + xpad->mapping |= MAP_DPAD_TO_BUTTONS; + if (triggers_to_buttons) + xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS; + if (sticks_to_null) + xpad->mapping |= MAP_STICKS_TO_NULL; + } + xpad->dev = input_dev; usb_make_path(udev, xpad->phys, sizeof(xpad->phys)); strlcat(xpad->phys, "/input0", sizeof(xpad->phys)); @@ -659,36 +906,55 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id input_dev->open = xpad_open; input_dev->close = xpad_close; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->evbit[0] = BIT_MASK(EV_KEY); + + if (!(xpad->mapping & MAP_STICKS_TO_NULL)) { + input_dev->evbit[0] |= BIT_MASK(EV_ABS); + /* set up axes */ + for (i = 0; xpad_abs[i] >= 0; i++) + xpad_set_up_abs(input_dev, xpad_abs[i]); + } + + /* set up standard buttons */ + for (i = 0; xpad_common_btn[i] >= 0; i++) + __set_bit(xpad_common_btn[i], input_dev->keybit); - /* set up buttons */ - for (i = 0; xpad_btn[i] >= 0; i++) - set_bit(xpad_btn[i], input_dev->keybit); - if (xpad->xtype == XTYPE_XBOX360) + /* set up model-specific ones */ + if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) { for (i = 0; xpad360_btn[i] >= 0; i++) - set_bit(xpad360_btn[i], input_dev->keybit); - if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) - for (i = 0; xpad_btn_pad[i] >= 0; i++) - set_bit(xpad_btn_pad[i], input_dev->keybit); + __set_bit(xpad360_btn[i], input_dev->keybit); + } else { + for (i = 0; xpad_btn[i] >= 0; i++) + __set_bit(xpad_btn[i], input_dev->keybit); + } - /* set up axes */ - for (i = 0; xpad_abs[i] >= 0; i++) - xpad_set_up_abs(input_dev, xpad_abs[i]); - if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) + if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { + for (i = 0; xpad_btn_pad[i] >= 0; i++) + __set_bit(xpad_btn_pad[i], input_dev->keybit); + } else { for (i = 0; xpad_abs_pad[i] >= 0; i++) xpad_set_up_abs(input_dev, xpad_abs_pad[i]); + } + + if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) { + for (i = 0; xpad_btn_triggers[i] >= 0; i++) + __set_bit(xpad_btn_triggers[i], input_dev->keybit); + } else { + for (i = 0; xpad_abs_triggers[i] >= 0; i++) + xpad_set_up_abs(input_dev, xpad_abs_triggers[i]); + } error = xpad_init_output(intf, xpad); if (error) - goto fail2; + goto fail3; error = xpad_init_ff(xpad); if (error) - goto fail3; + goto fail4; error = xpad_led_probe(xpad); if (error) - goto fail3; + goto fail5; ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; usb_fill_int_urb(xpad->irq_in, udev, @@ -700,14 +966,72 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id error = input_register_device(xpad->dev); if (error) - goto fail4; + goto fail6; usb_set_intfdata(intf, xpad); + + if (xpad->xtype == XTYPE_XBOX360W) { + /* + * Setup the message to set the LEDs on the + * controller when it shows up + */ + xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL); + if (!xpad->bulk_out) { + error = -ENOMEM; + goto fail7; + } + + xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL); + if (!xpad->bdata) { + error = -ENOMEM; + goto fail8; + } + + xpad->bdata[2] = 0x08; + switch (intf->cur_altsetting->desc.bInterfaceNumber) { + case 0: + xpad->bdata[3] = 0x42; + break; + case 2: + xpad->bdata[3] = 0x43; + break; + case 4: + xpad->bdata[3] = 0x44; + break; + case 6: + xpad->bdata[3] = 0x45; + } + + ep_irq_in = &intf->cur_altsetting->endpoint[1].desc; + usb_fill_bulk_urb(xpad->bulk_out, udev, + usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress), + xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad); + + /* + * Submit the int URB immediately rather than waiting for open + * because we get status messages from the device whether + * or not any controllers are attached. In fact, it's + * exactly the message that a controller has arrived that + * we're waiting for. + */ + xpad->irq_in->dev = xpad->udev; + error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); + if (error) + goto fail9; + } + return 0; - fail4: usb_free_urb(xpad->irq_in); - fail3: xpad_deinit_output(xpad); - fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); + fail9: kfree(xpad->bdata); + fail8: usb_free_urb(xpad->bulk_out); + fail7: input_unregister_device(input_dev); + input_dev = NULL; + fail6: xpad_led_disconnect(xpad); + fail5: if (input_dev) + input_ff_destroy(input_dev); + fail4: xpad_deinit_output(xpad); + fail3: usb_free_urb(xpad->irq_in); + fail2: usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); fail1: input_free_device(input_dev); kfree(xpad); return error; @@ -718,16 +1042,24 @@ static void xpad_disconnect(struct usb_interface *intf) { struct usb_xpad *xpad = usb_get_intfdata (intf); - usb_set_intfdata(intf, NULL); - if (xpad) { - xpad_led_disconnect(xpad); - input_unregister_device(xpad->dev); - xpad_deinit_output(xpad); - usb_free_urb(xpad->irq_in); - usb_buffer_free(xpad->udev, XPAD_PKT_LEN, - xpad->idata, xpad->idata_dma); - kfree(xpad); + xpad_led_disconnect(xpad); + input_unregister_device(xpad->dev); + xpad_deinit_output(xpad); + + if (xpad->xtype == XTYPE_XBOX360W) { + usb_kill_urb(xpad->bulk_out); + usb_free_urb(xpad->bulk_out); + usb_kill_urb(xpad->irq_in); } + + usb_free_urb(xpad->irq_in); + usb_free_coherent(xpad->udev, XPAD_PKT_LEN, + xpad->idata, xpad->idata_dma); + + kfree(xpad->bdata); + kfree(xpad); + + usb_set_intfdata(intf, NULL); } static struct usb_driver xpad_driver = { @@ -737,21 +1069,7 @@ static struct usb_driver xpad_driver = { .id_table = xpad_table, }; -static int __init usb_xpad_init(void) -{ - int result = usb_register(&xpad_driver); - if (result == 0) - info(DRIVER_DESC ":" DRIVER_VERSION); - return result; -} - -static void __exit usb_xpad_exit(void) -{ - usb_deregister(&xpad_driver); -} - -module_init(usb_xpad_init); -module_exit(usb_xpad_exit); +module_usb_driver(xpad_driver); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/input/joystick/zhenhua.c b/drivers/input/joystick/zhenhua.c new file mode 100644 index 00000000000..30af2e8c670 --- /dev/null +++ b/drivers/input/joystick/zhenhua.c @@ -0,0 +1,227 @@ +/* + * derived from "twidjoy.c" + * + * Copyright (c) 2008 Martin Kebert + * Copyright (c) 2001 Arndt Schoenewald + * Copyright (c) 2000-2001 Vojtech Pavlik + * Copyright (c) 2000 Mark Fletcher + * + */ + +/* + * Driver to use 4CH RC transmitter using Zhen Hua 5-byte protocol (Walkera Lama, + * EasyCopter etc.) as a joystick under Linux. + * + * RC transmitters using Zhen Hua 5-byte protocol are cheap four channels + * transmitters for control a RC planes or RC helicopters with possibility to + * connect on a serial port. + * Data coming from transmitter is in this order: + * 1. byte = synchronisation byte + * 2. byte = X axis + * 3. byte = Y axis + * 4. byte = RZ axis + * 5. byte = Z axis + * (and this is repeated) + * + * For questions or feedback regarding this driver module please contact: + * Martin Kebert <gkmarty@gmail.com> - but I am not a C-programmer nor kernel + * coder :-( + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> + +#define DRIVER_DESC "RC transmitter with 5-byte Zhen Hua protocol joystick driver" + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Constants. + */ + +#define ZHENHUA_MAX_LENGTH 5 + +/* + * Zhen Hua data. + */ + +struct zhenhua { + struct input_dev *dev; + int idx; + unsigned char data[ZHENHUA_MAX_LENGTH]; + char phys[32]; +}; + + +/* bits in all incoming bytes needs to be "reversed" */ +static int zhenhua_bitreverse(int x) +{ + x = ((x & 0xaa) >> 1) | ((x & 0x55) << 1); + x = ((x & 0xcc) >> 2) | ((x & 0x33) << 2); + x = ((x & 0xf0) >> 4) | ((x & 0x0f) << 4); + return x; +} + +/* + * zhenhua_process_packet() decodes packets the driver receives from the + * RC transmitter. It updates the data accordingly. + */ + +static void zhenhua_process_packet(struct zhenhua *zhenhua) +{ + struct input_dev *dev = zhenhua->dev; + unsigned char *data = zhenhua->data; + + input_report_abs(dev, ABS_Y, data[1]); + input_report_abs(dev, ABS_X, data[2]); + input_report_abs(dev, ABS_RZ, data[3]); + input_report_abs(dev, ABS_Z, data[4]); + + input_sync(dev); +} + +/* + * zhenhua_interrupt() is called by the low level driver when characters + * are ready for us. We then buffer them for further processing, or call the + * packet processing routine. + */ + +static irqreturn_t zhenhua_interrupt(struct serio *serio, unsigned char data, unsigned int flags) +{ + struct zhenhua *zhenhua = serio_get_drvdata(serio); + + /* All Zhen Hua packets are 5 bytes. The fact that the first byte + * is allways 0xf7 and all others are in range 0x32 - 0xc8 (50-200) + * can be used to check and regain sync. */ + + if (data == 0xef) + zhenhua->idx = 0; /* this byte starts a new packet */ + else if (zhenhua->idx == 0) + return IRQ_HANDLED; /* wrong MSB -- ignore this byte */ + + if (zhenhua->idx < ZHENHUA_MAX_LENGTH) + zhenhua->data[zhenhua->idx++] = zhenhua_bitreverse(data); + + if (zhenhua->idx == ZHENHUA_MAX_LENGTH) { + zhenhua_process_packet(zhenhua); + zhenhua->idx = 0; + } + + return IRQ_HANDLED; +} + +/* + * zhenhua_disconnect() is the opposite of zhenhua_connect() + */ + +static void zhenhua_disconnect(struct serio *serio) +{ + struct zhenhua *zhenhua = serio_get_drvdata(serio); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(zhenhua->dev); + kfree(zhenhua); +} + +/* + * zhenhua_connect() is the routine that is called when someone adds a + * new serio device. It looks for the Twiddler, and if found, registers + * it as an input device. + */ + +static int zhenhua_connect(struct serio *serio, struct serio_driver *drv) +{ + struct zhenhua *zhenhua; + struct input_dev *input_dev; + int err = -ENOMEM; + + zhenhua = kzalloc(sizeof(struct zhenhua), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!zhenhua || !input_dev) + goto fail1; + + zhenhua->dev = input_dev; + snprintf(zhenhua->phys, sizeof(zhenhua->phys), "%s/input0", serio->phys); + + input_dev->name = "Zhen Hua 5-byte device"; + input_dev->phys = zhenhua->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_ZHENHUA; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT(EV_ABS); + input_set_abs_params(input_dev, ABS_X, 50, 200, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 50, 200, 0, 0); + input_set_abs_params(input_dev, ABS_Z, 50, 200, 0, 0); + input_set_abs_params(input_dev, ABS_RZ, 50, 200, 0, 0); + + serio_set_drvdata(serio, zhenhua); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(zhenhua->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(zhenhua); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id zhenhua_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_ZHENHUA, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, zhenhua_serio_ids); + +static struct serio_driver zhenhua_drv = { + .driver = { + .name = "zhenhua", + }, + .description = DRIVER_DESC, + .id_table = zhenhua_serio_ids, + .interrupt = zhenhua_interrupt, + .connect = zhenhua_connect, + .disconnect = zhenhua_disconnect, +}; + +module_serio_driver(zhenhua_drv); |