aboutsummaryrefslogtreecommitdiff
path: root/drivers/iio/accel
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/accel')
-rw-r--r--drivers/iio/accel/Kconfig80
-rw-r--r--drivers/iio/accel/Makefile16
-rw-r--r--drivers/iio/accel/bma180.c680
-rw-r--r--drivers/iio/accel/hid-sensor-accel-3d.c431
-rw-r--r--drivers/iio/accel/kxsd9.c276
-rw-r--r--drivers/iio/accel/mma8452.c445
-rw-r--r--drivers/iio/accel/st_accel.h56
-rw-r--r--drivers/iio/accel/st_accel_buffer.c105
-rw-r--r--drivers/iio/accel/st_accel_core.c532
-rw-r--r--drivers/iio/accel/st_accel_i2c.c79
-rw-r--r--drivers/iio/accel/st_accel_spi.c78
11 files changed, 2778 insertions, 0 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
new file mode 100644
index 00000000000..1e120fa1e15
--- /dev/null
+++ b/drivers/iio/accel/Kconfig
@@ -0,0 +1,80 @@
+#
+# Accelerometer drivers
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Accelerometers"
+
+config BMA180
+ tristate "Bosch BMA180 3-Axis Accelerometer Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say Y here if you want to build a driver for the Bosch BMA180
+ triaxial acceleration sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bma180.
+
+config HID_SENSOR_ACCEL_3D
+ depends on HID_SENSOR_HUB
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select HID_SENSOR_IIO_COMMON
+ select HID_SENSOR_IIO_TRIGGER
+ tristate "HID Accelerometers 3D"
+ help
+ Say yes here to build support for the HID SENSOR
+ accelerometers 3D.
+
+config IIO_ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select IIO_ST_SENSORS_CORE
+ select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
+ select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
+ select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+ This driver can also be built as a module. If so, these modules
+ will be created:
+ - st_accel (core functions for the driver [it is mandatory]);
+ - st_accel_i2c (necessary for the I2C devices [optional*]);
+ - st_accel_spi (necessary for the SPI devices [optional*]);
+
+ (*) one of these is necessary to do something.
+
+config IIO_ST_ACCEL_I2C_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+ depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_ACCEL_SPI_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+ depends on IIO_ST_SENSORS_SPI
+
+config KXSD9
+ tristate "Kionix KXSD9 Accelerometer Driver"
+ depends on SPI
+ help
+ Say yes here to build support for the Kionix KXSD9 accelerometer.
+ Currently this only supports the device via an SPI interface.
+
+config MMA8452
+ tristate "Freescale MMA8452Q Accelerometer Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for the Freescale MMA8452Q 3-axis
+ accelerometer.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mma8452.
+
+endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
new file mode 100644
index 00000000000..dc0e379c259
--- /dev/null
+++ b/drivers/iio/accel/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for industrial I/O accelerometer drivers
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_BMA180) += bma180.o
+obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+obj-$(CONFIG_KXSD9) += kxsd9.o
+obj-$(CONFIG_MMA8452) += mma8452.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
+st_accel-y := st_accel_core.o
+st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o
+obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
new file mode 100644
index 00000000000..a077cc86421
--- /dev/null
+++ b/drivers/iio/accel/bma180.c
@@ -0,0 +1,680 @@
+/*
+ * bma180.c - IIO driver for Bosch BMA180 triaxial acceleration sensor
+ *
+ * Copyright 2013 Oleksandr Kravchenko <x0199363@ti.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define BMA180_DRV_NAME "bma180"
+#define BMA180_IRQ_NAME "bma180_event"
+
+/* Register set */
+#define BMA180_CHIP_ID 0x00 /* Need to distinguish BMA180 from other */
+#define BMA180_ACC_X_LSB 0x02 /* First of 6 registers of accel data */
+#define BMA180_CTRL_REG0 0x0d
+#define BMA180_RESET 0x10
+#define BMA180_BW_TCS 0x20
+#define BMA180_CTRL_REG3 0x21
+#define BMA180_TCO_Z 0x30
+#define BMA180_OFFSET_LSB1 0x35
+
+/* BMA180_CTRL_REG0 bits */
+#define BMA180_DIS_WAKE_UP BIT(0) /* Disable wake up mode */
+#define BMA180_SLEEP BIT(1) /* 1 - chip will sleep */
+#define BMA180_EE_W BIT(4) /* Unlock writing to addr from 0x20 */
+#define BMA180_RESET_INT BIT(6) /* Reset pending interrupts */
+
+/* BMA180_CTRL_REG3 bits */
+#define BMA180_NEW_DATA_INT BIT(1) /* Intr every new accel data is ready */
+
+/* BMA180_OFFSET_LSB1 skipping mode bit */
+#define BMA180_SMP_SKIP BIT(0)
+
+/* Bit masks for registers bit fields */
+#define BMA180_RANGE 0x0e /* Range of measured accel values*/
+#define BMA180_BW 0xf0 /* Accel bandwidth */
+#define BMA180_MODE_CONFIG 0x03 /* Config operation modes */
+
+/* We have to write this value in reset register to do soft reset */
+#define BMA180_RESET_VAL 0xb6
+
+#define BMA_180_ID_REG_VAL 0x03
+
+/* Chip power modes */
+#define BMA180_LOW_NOISE 0x00
+#define BMA180_LOW_POWER 0x03
+
+#define BMA180_LOW_NOISE_STR "low_noise"
+#define BMA180_LOW_POWER_STR "low_power"
+
+/* Defaults values */
+#define BMA180_DEF_PMODE 0
+#define BMA180_DEF_BW 20
+#define BMA180_DEF_SCALE 2452
+
+/* Available values for sysfs */
+#define BMA180_FLP_FREQ_AVAILABLE \
+ "10 20 40 75 150 300"
+#define BMA180_SCALE_AVAILABLE \
+ "0.001275 0.001863 0.002452 0.003727 0.004903 0.009709 0.019417"
+
+struct bma180_data {
+ struct i2c_client *client;
+ struct iio_trigger *trig;
+ struct mutex mutex;
+ int sleep_state;
+ int scale;
+ int bw;
+ int pmode;
+ char *buff;
+};
+
+enum bma180_axis {
+ AXIS_X,
+ AXIS_Y,
+ AXIS_Z,
+};
+
+static int bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */
+static int scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 };
+
+static int bma180_get_acc_reg(struct bma180_data *data, enum bma180_axis axis)
+{
+ u8 reg = BMA180_ACC_X_LSB + axis * 2;
+ int ret;
+
+ if (data->sleep_state)
+ return -EBUSY;
+
+ ret = i2c_smbus_read_word_data(data->client, reg);
+ if (ret < 0)
+ dev_err(&data->client->dev,
+ "failed to read accel_%c registers\n", 'x' + axis);
+
+ return ret;
+}
+
+static int bma180_set_bits(struct bma180_data *data, u8 reg, u8 mask, u8 val)
+{
+ int ret = i2c_smbus_read_byte_data(data->client, reg);
+ u8 reg_val = (ret & ~mask) | (val << (ffs(mask) - 1));
+
+ if (ret < 0)
+ return ret;
+
+ return i2c_smbus_write_byte_data(data->client, reg, reg_val);
+}
+
+static int bma180_reset_intr(struct bma180_data *data)
+{
+ int ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_RESET_INT, 1);
+
+ if (ret)
+ dev_err(&data->client->dev, "failed to reset interrupt\n");
+
+ return ret;
+}
+
+static int bma180_set_new_data_intr_state(struct bma180_data *data, int state)
+{
+ u8 reg_val = state ? BMA180_NEW_DATA_INT : 0x00;
+ int ret = i2c_smbus_write_byte_data(data->client, BMA180_CTRL_REG3,
+ reg_val);
+
+ if (ret)
+ goto err;
+ ret = bma180_reset_intr(data);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ dev_err(&data->client->dev,
+ "failed to set new data interrupt state %d\n", state);
+ return ret;
+}
+
+static int bma180_set_sleep_state(struct bma180_data *data, int state)
+{
+ int ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_SLEEP, state);
+
+ if (ret) {
+ dev_err(&data->client->dev,
+ "failed to set sleep state %d\n", state);
+ return ret;
+ }
+ data->sleep_state = state;
+
+ return 0;
+}
+
+static int bma180_set_ee_writing_state(struct bma180_data *data, int state)
+{
+ int ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_EE_W, state);
+
+ if (ret)
+ dev_err(&data->client->dev,
+ "failed to set ee writing state %d\n", state);
+
+ return ret;
+}
+
+static int bma180_set_bw(struct bma180_data *data, int val)
+{
+ int ret, i;
+
+ if (data->sleep_state)
+ return -EBUSY;
+
+ for (i = 0; i < ARRAY_SIZE(bw_table); ++i) {
+ if (bw_table[i] == val) {
+ ret = bma180_set_bits(data,
+ BMA180_BW_TCS, BMA180_BW, i);
+ if (ret) {
+ dev_err(&data->client->dev,
+ "failed to set bandwidth\n");
+ return ret;
+ }
+ data->bw = val;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int bma180_set_scale(struct bma180_data *data, int val)
+{
+ int ret, i;
+
+ if (data->sleep_state)
+ return -EBUSY;
+
+ for (i = 0; i < ARRAY_SIZE(scale_table); ++i)
+ if (scale_table[i] == val) {
+ ret = bma180_set_bits(data,
+ BMA180_OFFSET_LSB1, BMA180_RANGE, i);
+ if (ret) {
+ dev_err(&data->client->dev,
+ "failed to set scale\n");
+ return ret;
+ }
+ data->scale = val;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int bma180_set_pmode(struct bma180_data *data, int mode)
+{
+ u8 reg_val = mode ? BMA180_LOW_POWER : BMA180_LOW_NOISE;
+ int ret = bma180_set_bits(data, BMA180_TCO_Z, BMA180_MODE_CONFIG,
+ reg_val);
+
+ if (ret) {
+ dev_err(&data->client->dev, "failed to set power mode\n");
+ return ret;
+ }
+ data->pmode = mode;
+
+ return 0;
+}
+
+static int bma180_soft_reset(struct bma180_data *data)
+{
+ int ret = i2c_smbus_write_byte_data(data->client,
+ BMA180_RESET, BMA180_RESET_VAL);
+
+ if (ret)
+ dev_err(&data->client->dev, "failed to reset the chip\n");
+
+ return ret;
+}
+
+static int bma180_chip_init(struct bma180_data *data)
+{
+ /* Try to read chip_id register. It must return 0x03. */
+ int ret = i2c_smbus_read_byte_data(data->client, BMA180_CHIP_ID);
+
+ if (ret < 0)
+ goto err;
+ if (ret != BMA_180_ID_REG_VAL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ ret = bma180_soft_reset(data);
+ if (ret)
+ goto err;
+ /*
+ * No serial transaction should occur within minimum 10 us
+ * after soft_reset command
+ */
+ msleep(20);
+
+ ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_DIS_WAKE_UP, 1);
+ if (ret)
+ goto err;
+ ret = bma180_set_ee_writing_state(data, 1);
+ if (ret)
+ goto err;
+ ret = bma180_set_new_data_intr_state(data, 0);
+ if (ret)
+ goto err;
+ ret = bma180_set_bits(data, BMA180_OFFSET_LSB1, BMA180_SMP_SKIP, 1);
+ if (ret)
+ goto err;
+ ret = bma180_set_pmode(data, BMA180_DEF_PMODE);
+ if (ret)
+ goto err;
+ ret = bma180_set_bw(data, BMA180_DEF_BW);
+ if (ret)
+ goto err;
+ ret = bma180_set_scale(data, BMA180_DEF_SCALE);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ dev_err(&data->client->dev, "failed to init the chip\n");
+ return ret;
+}
+
+static void bma180_chip_disable(struct bma180_data *data)
+{
+ if (bma180_set_new_data_intr_state(data, 0))
+ goto err;
+ if (bma180_set_ee_writing_state(data, 0))
+ goto err;
+ if (bma180_set_sleep_state(data, 1))
+ goto err;
+
+ return;
+
+err:
+ dev_err(&data->client->dev, "failed to disable the chip\n");
+}
+
+static IIO_CONST_ATTR(in_accel_filter_low_pass_3db_frequency_available,
+ BMA180_FLP_FREQ_AVAILABLE);
+static IIO_CONST_ATTR(in_accel_scale_available, BMA180_SCALE_AVAILABLE);
+
+static struct attribute *bma180_attributes[] = {
+ &iio_const_attr_in_accel_filter_low_pass_3db_frequency_available.dev_attr.attr,
+ &iio_const_attr_in_accel_scale_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group bma180_attrs_group = {
+ .attrs = bma180_attributes,
+};
+
+static int bma180_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2,
+ long mask)
+{
+ struct bma180_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&data->mutex);
+ if (iio_buffer_enabled(indio_dev))
+ ret = -EBUSY;
+ else
+ ret = bma180_get_acc_reg(data, chan->scan_index);
+ mutex_unlock(&data->mutex);
+ if (ret < 0)
+ return ret;
+ *val = (s16)ret >> chan->scan_type.shift;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ *val = data->bw;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = data->scale;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bma180_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ struct bma180_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ if (val)
+ return -EINVAL;
+ mutex_lock(&data->mutex);
+ ret = bma180_set_scale(data, val2);
+ mutex_unlock(&data->mutex);
+ return ret;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ if (val2)
+ return -EINVAL;
+ mutex_lock(&data->mutex);
+ ret = bma180_set_bw(data, val);
+ mutex_unlock(&data->mutex);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bma180_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct bma180_data *data = iio_priv(indio_dev);
+
+ if (data->buff)
+ devm_kfree(&indio_dev->dev, data->buff);
+ data->buff = devm_kzalloc(&indio_dev->dev,
+ indio_dev->scan_bytes, GFP_KERNEL);
+ if (!data->buff)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static const struct iio_info bma180_info = {
+ .attrs = &bma180_attrs_group,
+ .read_raw = bma180_read_raw,
+ .write_raw = bma180_write_raw,
+ .update_scan_mode = bma180_update_scan_mode,
+ .driver_module = THIS_MODULE,
+};
+
+static const char * const bma180_power_modes[] = {
+ BMA180_LOW_NOISE_STR,
+ BMA180_LOW_POWER_STR,
+};
+
+static int bma180_get_power_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct bma180_data *data = iio_priv(indio_dev);
+
+ return data->pmode;
+}
+
+static int bma180_set_power_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, unsigned int mode)
+{
+ struct bma180_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = bma180_set_pmode(data, mode);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static const struct iio_enum bma180_power_mode_enum = {
+ .items = bma180_power_modes,
+ .num_items = ARRAY_SIZE(bma180_power_modes),
+ .get = bma180_get_power_mode,
+ .set = bma180_set_power_mode,
+};
+
+static const struct iio_chan_spec_ext_info bma180_ext_info[] = {
+ IIO_ENUM("power_mode", true, &bma180_power_mode_enum),
+ IIO_ENUM_AVAILABLE("power_mode", &bma180_power_mode_enum),
+ { },
+};
+
+#define BMA180_CHANNEL(_axis) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+ .scan_index = AXIS_##_axis, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 14, \
+ .storagebits = 16, \
+ .shift = 2, \
+ }, \
+ .ext_info = bma180_ext_info, \
+}
+
+static const struct iio_chan_spec bma180_channels[] = {
+ BMA180_CHANNEL(X),
+ BMA180_CHANNEL(Y),
+ BMA180_CHANNEL(Z),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static irqreturn_t bma180_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct bma180_data *data = iio_priv(indio_dev);
+ int64_t time_ns = iio_get_time_ns();
+ int bit, ret, i = 0;
+
+ mutex_lock(&data->mutex);
+
+ for_each_set_bit(bit, indio_dev->buffer->scan_mask,
+ indio_dev->masklength) {
+ ret = bma180_get_acc_reg(data, bit);
+ if (ret < 0) {
+ mutex_unlock(&data->mutex);
+ goto err;
+ }
+ ((s16 *)data->buff)[i++] = ret;
+ }
+ mutex_unlock(&data->mutex);
+
+ iio_push_to_buffers_with_timestamp(indio_dev, data->buff, time_ns);
+err:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static int bma180_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct bma180_data *data = iio_priv(indio_dev);
+
+ return bma180_set_new_data_intr_state(data, state);
+}
+
+static int bma180_trig_try_reen(struct iio_trigger *trig)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct bma180_data *data = iio_priv(indio_dev);
+
+ return bma180_reset_intr(data);
+}
+
+static const struct iio_trigger_ops bma180_trigger_ops = {
+ .set_trigger_state = bma180_data_rdy_trigger_set_state,
+ .try_reenable = bma180_trig_try_reen,
+ .owner = THIS_MODULE,
+};
+
+static int bma180_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct bma180_data *data;
+ struct iio_dev *indio_dev;
+ struct iio_trigger *trig;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+
+ ret = bma180_chip_init(data);
+ if (ret < 0)
+ goto err_chip_disable;
+
+ mutex_init(&data->mutex);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->channels = bma180_channels;
+ indio_dev->num_channels = ARRAY_SIZE(bma180_channels);
+ indio_dev->name = BMA180_DRV_NAME;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &bma180_info;
+
+ trig = iio_trigger_alloc("%s-dev%d", indio_dev->name, indio_dev->id);
+ if (!trig) {
+ ret = -ENOMEM;
+ goto err_chip_disable;
+ }
+
+ ret = devm_request_irq(&client->dev, client->irq,
+ iio_trigger_generic_data_rdy_poll,
+ IRQF_TRIGGER_RISING, BMA180_IRQ_NAME, trig);
+ if (ret) {
+ dev_err(&client->dev, "unable to request IRQ\n");
+ goto err_trigger_free;
+ }
+
+ trig->dev.parent = &client->dev;
+ trig->ops = &bma180_trigger_ops;
+ iio_trigger_set_drvdata(trig, indio_dev);
+ data->trig = trig;
+ indio_dev->trig = trig;
+
+ ret = iio_trigger_register(trig);
+ if (ret)
+ goto err_trigger_free;
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ bma180_trigger_handler, NULL);
+ if (ret < 0) {
+ dev_err(&client->dev, "unable to setup iio triggered buffer\n");
+ goto err_trigger_unregister;
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev, "unable to register iio device\n");
+ goto err_buffer_cleanup;
+ }
+
+ return 0;
+
+err_buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
+err_trigger_unregister:
+ iio_trigger_unregister(trig);
+err_trigger_free:
+ iio_trigger_free(trig);
+err_chip_disable:
+ bma180_chip_disable(data);
+
+ return ret;
+}
+
+static int bma180_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct bma180_data *data = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+ iio_trigger_unregister(data->trig);
+ iio_trigger_free(data->trig);
+
+ mutex_lock(&data->mutex);
+ bma180_chip_disable(data);
+ mutex_unlock(&data->mutex);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bma180_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct bma180_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = bma180_set_sleep_state(data, 1);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int bma180_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct bma180_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = bma180_set_sleep_state(data, 0);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
+#define BMA180_PM_OPS (&bma180_pm_ops)
+#else
+#define BMA180_PM_OPS NULL
+#endif
+
+static struct i2c_device_id bma180_id[] = {
+ { BMA180_DRV_NAME, 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, bma180_id);
+
+static struct i2c_driver bma180_driver = {
+ .driver = {
+ .name = BMA180_DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = BMA180_PM_OPS,
+ },
+ .probe = bma180_probe,
+ .remove = bma180_remove,
+ .id_table = bma180_id,
+};
+
+module_i2c_driver(bma180_driver);
+
+MODULE_AUTHOR("Kravchenko Oleksandr <x0199363@ti.com>");
+MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_DESCRIPTION("Bosch BMA180 triaxial acceleration sensor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
new file mode 100644
index 00000000000..54e464e4bb7
--- /dev/null
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -0,0 +1,431 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include "../common/hid-sensors/hid-sensor-trigger.h"
+
+enum accel_3d_channel {
+ CHANNEL_SCAN_INDEX_X,
+ CHANNEL_SCAN_INDEX_Y,
+ CHANNEL_SCAN_INDEX_Z,
+ ACCEL_3D_CHANNEL_MAX,
+};
+
+struct accel_3d_state {
+ struct hid_sensor_hub_callbacks callbacks;
+ struct hid_sensor_common common_attributes;
+ struct hid_sensor_hub_attribute_info accel[ACCEL_3D_CHANNEL_MAX];
+ u32 accel_val[ACCEL_3D_CHANNEL_MAX];
+ int scale_pre_decml;
+ int scale_post_decml;
+ int scale_precision;
+ int value_offset;
+};
+
+static const u32 accel_3d_addresses[ACCEL_3D_CHANNEL_MAX] = {
+ HID_USAGE_SENSOR_ACCEL_X_AXIS,
+ HID_USAGE_SENSOR_ACCEL_Y_AXIS,
+ HID_USAGE_SENSOR_ACCEL_Z_AXIS
+};
+
+/* Channel definitions */
+static const struct iio_chan_spec accel_3d_channels[] = {
+ {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_HYSTERESIS),
+ .scan_index = CHANNEL_SCAN_INDEX_X,
+ }, {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_Y,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_HYSTERESIS),
+ .scan_index = CHANNEL_SCAN_INDEX_Y,
+ }, {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_Z,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_HYSTERESIS),
+ .scan_index = CHANNEL_SCAN_INDEX_Z,
+ }
+};
+
+/* Adjust channel real bits based on report descriptor */
+static void accel_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
+ int channel, int size)
+{
+ channels[channel].scan_type.sign = 's';
+ /* Real storage bits will change based on the report desc. */
+ channels[channel].scan_type.realbits = size * 8;
+ /* Maximum size of a sample to capture is u32 */
+ channels[channel].scan_type.storagebits = sizeof(u32) * 8;
+}
+
+/* Channel read_raw handler */
+static int accel_3d_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2,
+ long mask)
+{
+ struct accel_3d_state *accel_state = iio_priv(indio_dev);
+ int report_id = -1;
+ u32 address;
+ int ret_type;
+ s32 poll_value;
+
+ *val = 0;
+ *val2 = 0;
+ switch (mask) {
+ case 0:
+ poll_value = hid_sensor_read_poll_value(
+ &accel_state->common_attributes);
+ if (poll_value < 0)
+ return -EINVAL;
+
+ hid_sensor_power_state(&accel_state->common_attributes, true);
+ msleep_interruptible(poll_value * 2);
+ report_id = accel_state->accel[chan->scan_index].report_id;
+ address = accel_3d_addresses[chan->scan_index];
+ if (report_id >= 0)
+ *val = sensor_hub_input_attr_get_raw_value(
+ accel_state->common_attributes.hsdev,
+ HID_USAGE_SENSOR_ACCEL_3D, address,
+ report_id);
+ else {
+ *val = 0;
+ hid_sensor_power_state(&accel_state->common_attributes,
+ false);
+ return -EINVAL;
+ }
+ hid_sensor_power_state(&accel_state->common_attributes, false);
+ ret_type = IIO_VAL_INT;
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ *val = accel_state->scale_pre_decml;
+ *val2 = accel_state->scale_post_decml;
+ ret_type = accel_state->scale_precision;
+ break;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = accel_state->value_offset;
+ ret_type = IIO_VAL_INT;
+ break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret_type = hid_sensor_read_samp_freq_value(
+ &accel_state->common_attributes, val, val2);
+ break;
+ case IIO_CHAN_INFO_HYSTERESIS:
+ ret_type = hid_sensor_read_raw_hyst_value(
+ &accel_state->common_attributes, val, val2);
+ break;
+ default:
+ ret_type = -EINVAL;
+ break;
+ }
+
+ return ret_type;
+}
+
+/* Channel write_raw handler */
+static int accel_3d_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct accel_3d_state *accel_state = iio_priv(indio_dev);
+ int ret = 0;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = hid_sensor_write_samp_freq_value(
+ &accel_state->common_attributes, val, val2);
+ break;
+ case IIO_CHAN_INFO_HYSTERESIS:
+ ret = hid_sensor_write_raw_hyst_value(
+ &accel_state->common_attributes, val, val2);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static const struct iio_info accel_3d_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &accel_3d_read_raw,
+ .write_raw = &accel_3d_write_raw,
+};
+
+/* Function to push data to buffer */
+static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
+ int len)
+{
+ dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
+ iio_push_to_buffers(indio_dev, data);
+}
+
+/* Callback handler to send event after all samples are received and captured */
+static int accel_3d_proc_event(struct hid_sensor_hub_device *hsdev,
+ unsigned usage_id,
+ void *priv)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(priv);
+ struct accel_3d_state *accel_state = iio_priv(indio_dev);
+
+ dev_dbg(&indio_dev->dev, "accel_3d_proc_event\n");
+ if (atomic_read(&accel_state->common_attributes.data_ready))
+ hid_sensor_push_data(indio_dev,
+ accel_state->accel_val,
+ sizeof(accel_state->accel_val));
+
+ return 0;
+}
+
+/* Capture samples in local storage */
+static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
+ unsigned usage_id,
+ size_t raw_len, char *raw_data,
+ void *priv)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(priv);
+ struct accel_3d_state *accel_state = iio_priv(indio_dev);
+ int offset;
+ int ret = -EINVAL;
+
+ switch (usage_id) {
+ case HID_USAGE_SENSOR_ACCEL_X_AXIS:
+ case HID_USAGE_SENSOR_ACCEL_Y_AXIS:
+ case HID_USAGE_SENSOR_ACCEL_Z_AXIS:
+ offset = usage_id - HID_USAGE_SENSOR_ACCEL_X_AXIS;
+ accel_state->accel_val[CHANNEL_SCAN_INDEX_X + offset] =
+ *(u32 *)raw_data;
+ ret = 0;
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/* Parse report which is specific to an usage id*/
+static int accel_3d_parse_report(struct platform_device *pdev,
+ struct hid_sensor_hub_device *hsdev,
+ struct iio_chan_spec *channels,
+ unsigned usage_id,
+ struct accel_3d_state *st)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
+ ret = sensor_hub_input_get_attribute_info(hsdev,
+ HID_INPUT_REPORT,
+ usage_id,
+ HID_USAGE_SENSOR_ACCEL_X_AXIS + i,
+ &st->accel[CHANNEL_SCAN_INDEX_X + i]);
+ if (ret < 0)
+ break;
+ accel_3d_adjust_channel_bit_mask(channels,
+ CHANNEL_SCAN_INDEX_X + i,
+ st->accel[CHANNEL_SCAN_INDEX_X + i].size);
+ }
+ dev_dbg(&pdev->dev, "accel_3d %x:%x, %x:%x, %x:%x\n",
+ st->accel[0].index,
+ st->accel[0].report_id,
+ st->accel[1].index, st->accel[1].report_id,
+ st->accel[2].index, st->accel[2].report_id);
+
+ st->scale_precision = hid_sensor_format_scale(
+ HID_USAGE_SENSOR_ACCEL_3D,
+ &st->accel[CHANNEL_SCAN_INDEX_X],
+ &st->scale_pre_decml, &st->scale_post_decml);
+
+ /* Set Sensitivity field ids, when there is no individual modifier */
+ if (st->common_attributes.sensitivity.index < 0) {
+ sensor_hub_input_get_attribute_info(hsdev,
+ HID_FEATURE_REPORT, usage_id,
+ HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+ HID_USAGE_SENSOR_DATA_ACCELERATION,
+ &st->common_attributes.sensitivity);
+ dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+ st->common_attributes.sensitivity.index,
+ st->common_attributes.sensitivity.report_id);
+ }
+
+ return ret;
+}
+
+/* Function to initialize the processing for usage id */
+static int hid_accel_3d_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ static const char *name = "accel_3d";
+ struct iio_dev *indio_dev;
+ struct accel_3d_state *accel_state;
+ struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+ struct iio_chan_spec *channels;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev,
+ sizeof(struct accel_3d_state));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ accel_state = iio_priv(indio_dev);
+ accel_state->common_attributes.hsdev = hsdev;
+ accel_state->common_attributes.pdev = pdev;
+
+ ret = hid_sensor_parse_common_attributes(hsdev,
+ HID_USAGE_SENSOR_ACCEL_3D,
+ &accel_state->common_attributes);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to setup common attributes\n");
+ return ret;
+ }
+
+ channels = kmemdup(accel_3d_channels, sizeof(accel_3d_channels),
+ GFP_KERNEL);
+ if (!channels) {
+ dev_err(&pdev->dev, "failed to duplicate channels\n");
+ return -ENOMEM;
+ }
+
+ ret = accel_3d_parse_report(pdev, hsdev, channels,
+ HID_USAGE_SENSOR_ACCEL_3D, accel_state);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to setup attributes\n");
+ goto error_free_dev_mem;
+ }
+
+ indio_dev->channels = channels;
+ indio_dev->num_channels = ARRAY_SIZE(accel_3d_channels);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->info = &accel_3d_info;
+ indio_dev->name = name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ NULL, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
+ goto error_free_dev_mem;
+ }
+ atomic_set(&accel_state->common_attributes.data_ready, 0);
+ ret = hid_sensor_setup_trigger(indio_dev, name,
+ &accel_state->common_attributes);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "trigger setup failed\n");
+ goto error_unreg_buffer_funcs;
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "device register failed\n");
+ goto error_remove_trigger;
+ }
+
+ accel_state->callbacks.send_event = accel_3d_proc_event;
+ accel_state->callbacks.capture_sample = accel_3d_capture_sample;
+ accel_state->callbacks.pdev = pdev;
+ ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D,
+ &accel_state->callbacks);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "callback reg failed\n");
+ goto error_iio_unreg;
+ }
+
+ return ret;
+
+error_iio_unreg:
+ iio_device_unregister(indio_dev);
+error_remove_trigger:
+ hid_sensor_remove_trigger(&accel_state->common_attributes);
+error_unreg_buffer_funcs:
+ iio_triggered_buffer_cleanup(indio_dev);
+error_free_dev_mem:
+ kfree(indio_dev->channels);
+ return ret;
+}
+
+/* Function to deinitialize the processing for usage id */
+static int hid_accel_3d_remove(struct platform_device *pdev)
+{
+ struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct accel_3d_state *accel_state = iio_priv(indio_dev);
+
+ sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D);
+ iio_device_unregister(indio_dev);
+ hid_sensor_remove_trigger(&accel_state->common_attributes);
+ iio_triggered_buffer_cleanup(indio_dev);
+ kfree(indio_dev->channels);
+
+ return 0;
+}
+
+static struct platform_device_id hid_accel_3d_ids[] = {
+ {
+ /* Format: HID-SENSOR-usage_id_in_hex_lowercase */
+ .name = "HID-SENSOR-200073",
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, hid_accel_3d_ids);
+
+static struct platform_driver hid_accel_3d_platform_driver = {
+ .id_table = hid_accel_3d_ids,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = hid_accel_3d_probe,
+ .remove = hid_accel_3d_remove,
+};
+module_platform_driver(hid_accel_3d_platform_driver);
+
+MODULE_DESCRIPTION("HID Sensor Accel 3D");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
new file mode 100644
index 00000000000..98ba761cbb9
--- /dev/null
+++ b/drivers/iio/accel/kxsd9.c
@@ -0,0 +1,276 @@
+/*
+ * kxsd9.c simple support for the Kionix KXSD9 3D
+ * accelerometer.
+ *
+ * Copyright (c) 2008-2009 Jonathan Cameron <jic23@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The i2c interface is very similar, so shouldn't be a problem once
+ * I have a suitable wire made up.
+ *
+ * TODO: Support the motion detector
+ * Uses register address incrementing so could have a
+ * heavily optimized ring buffer access function.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define KXSD9_REG_X 0x00
+#define KXSD9_REG_Y 0x02
+#define KXSD9_REG_Z 0x04
+#define KXSD9_REG_AUX 0x06
+#define KXSD9_REG_RESET 0x0a
+#define KXSD9_REG_CTRL_C 0x0c
+
+#define KXSD9_FS_MASK 0x03
+
+#define KXSD9_REG_CTRL_B 0x0d
+#define KXSD9_REG_CTRL_A 0x0e
+
+#define KXSD9_READ(a) (0x80 | (a))
+#define KXSD9_WRITE(a) (a)
+
+#define KXSD9_STATE_RX_SIZE 2
+#define KXSD9_STATE_TX_SIZE 2
+/**
+ * struct kxsd9_state - device related storage
+ * @buf_lock: protect the rx and tx buffers.
+ * @us: spi device
+ * @rx: single rx buffer storage
+ * @tx: single tx buffer storage
+ **/
+struct kxsd9_state {
+ struct mutex buf_lock;
+ struct spi_device *us;
+ u8 rx[KXSD9_STATE_RX_SIZE] ____cacheline_aligned;
+ u8 tx[KXSD9_STATE_TX_SIZE];
+};
+
+#define KXSD9_SCALE_2G "0.011978"
+#define KXSD9_SCALE_4G "0.023927"
+#define KXSD9_SCALE_6G "0.035934"
+#define KXSD9_SCALE_8G "0.047853"
+
+/* reverse order */
+static const int kxsd9_micro_scales[4] = { 47853, 35934, 23927, 11978 };
+
+static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro)
+{
+ int ret, i;
+ struct kxsd9_state *st = iio_priv(indio_dev);
+ bool foundit = false;
+
+ for (i = 0; i < 4; i++)
+ if (micro == kxsd9_micro_scales[i]) {
+ foundit = true;
+ break;
+ }
+ if (!foundit)
+ return -EINVAL;
+
+ mutex_lock(&st->buf_lock);
+ ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
+ if (ret)
+ goto error_ret;
+ st->tx[0] = KXSD9_WRITE(KXSD9_REG_CTRL_C);
+ st->tx[1] = (ret & ~KXSD9_FS_MASK) | i;
+
+ ret = spi_write(st->us, st->tx, 2);
+error_ret:
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+static int kxsd9_read(struct iio_dev *indio_dev, u8 address)
+{
+ int ret;
+ struct kxsd9_state *st = iio_priv(indio_dev);
+ struct spi_transfer xfers[] = {
+ {
+ .bits_per_word = 8,
+ .len = 1,
+ .delay_usecs = 200,
+ .tx_buf = st->tx,
+ }, {
+ .bits_per_word = 8,
+ .len = 2,
+ .rx_buf = st->rx,
+ },
+ };
+
+ mutex_lock(&st->buf_lock);
+ st->tx[0] = KXSD9_READ(address);
+ ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
+ if (!ret)
+ ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+static IIO_CONST_ATTR(accel_scale_available,
+ KXSD9_SCALE_2G " "
+ KXSD9_SCALE_4G " "
+ KXSD9_SCALE_6G " "
+ KXSD9_SCALE_8G);
+
+static struct attribute *kxsd9_attributes[] = {
+ &iio_const_attr_accel_scale_available.dev_attr.attr,
+ NULL,
+};
+
+static int kxsd9_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ int ret = -EINVAL;
+
+ if (mask == IIO_CHAN_INFO_SCALE) {
+ /* Check no integer component */
+ if (val)
+ return -EINVAL;
+ ret = kxsd9_write_scale(indio_dev, val2);
+ }
+
+ return ret;
+}
+
+static int kxsd9_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret = -EINVAL;
+ struct kxsd9_state *st = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = kxsd9_read(indio_dev, chan->address);
+ if (ret < 0)
+ goto error_ret;
+ *val = ret;
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
+ if (ret)
+ goto error_ret;
+ *val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK];
+ ret = IIO_VAL_INT_PLUS_MICRO;
+ break;
+ }
+
+error_ret:
+ return ret;
+};
+#define KXSD9_ACCEL_CHAN(axis) \
+ { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .address = KXSD9_REG_##axis, \
+ }
+
+static const struct iio_chan_spec kxsd9_channels[] = {
+ KXSD9_ACCEL_CHAN(X), KXSD9_ACCEL_CHAN(Y), KXSD9_ACCEL_CHAN(Z),
+ {
+ .type = IIO_VOLTAGE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .indexed = 1,
+ .address = KXSD9_REG_AUX,
+ }
+};
+
+static const struct attribute_group kxsd9_attribute_group = {
+ .attrs = kxsd9_attributes,
+};
+
+static int kxsd9_power_up(struct kxsd9_state *st)
+{
+ int ret;
+
+ st->tx[0] = 0x0d;
+ st->tx[1] = 0x40;
+ ret = spi_write(st->us, st->tx, 2);
+ if (ret)
+ return ret;
+
+ st->tx[0] = 0x0c;
+ st->tx[1] = 0x9b;
+ return spi_write(st->us, st->tx, 2);
+};
+
+static const struct iio_info kxsd9_info = {
+ .read_raw = &kxsd9_read_raw,
+ .write_raw = &kxsd9_write_raw,
+ .attrs = &kxsd9_attribute_group,
+ .driver_module = THIS_MODULE,
+};
+
+static int kxsd9_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct kxsd9_state *st;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ spi_set_drvdata(spi, indio_dev);
+
+ st->us = spi;
+ mutex_init(&st->buf_lock);
+ indio_dev->channels = kxsd9_channels;
+ indio_dev->num_channels = ARRAY_SIZE(kxsd9_channels);
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->info = &kxsd9_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ spi->mode = SPI_MODE_0;
+ spi_setup(spi);
+ kxsd9_power_up(st);
+
+ return iio_device_register(indio_dev);
+}
+
+static int kxsd9_remove(struct spi_device *spi)
+{
+ iio_device_unregister(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id kxsd9_id[] = {
+ {"kxsd9", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(spi, kxsd9_id);
+
+static struct spi_driver kxsd9_driver = {
+ .driver = {
+ .name = "kxsd9",
+ .owner = THIS_MODULE,
+ },
+ .probe = kxsd9_probe,
+ .remove = kxsd9_remove,
+ .id_table = kxsd9_id,
+};
+module_spi_driver(kxsd9_driver);
+
+MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
+MODULE_DESCRIPTION("Kionix KXSD9 SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
new file mode 100644
index 00000000000..2a5fa9a436e
--- /dev/null
+++ b/drivers/iio/accel/mma8452.c
@@ -0,0 +1,445 @@
+/*
+ * mma8452.c - Support for Freescale MMA8452Q 3-axis 12-bit accelerometer
+ *
+ * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * 7-bit I2C slave address 0x1c/0x1d (pin selectable)
+ *
+ * TODO: interrupt, thresholding, orientation / freefall events, autosleep
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/delay.h>
+
+#define MMA8452_STATUS 0x00
+#define MMA8452_OUT_X 0x01 /* MSB first, 12-bit */
+#define MMA8452_OUT_Y 0x03
+#define MMA8452_OUT_Z 0x05
+#define MMA8452_WHO_AM_I 0x0d
+#define MMA8452_DATA_CFG 0x0e
+#define MMA8452_OFF_X 0x2f
+#define MMA8452_OFF_Y 0x30
+#define MMA8452_OFF_Z 0x31
+#define MMA8452_CTRL_REG1 0x2a
+#define MMA8452_CTRL_REG2 0x2b
+
+#define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
+
+#define MMA8452_CTRL_DR_MASK (BIT(5) | BIT(4) | BIT(3))
+#define MMA8452_CTRL_DR_SHIFT 3
+#define MMA8452_CTRL_DR_DEFAULT 0x4 /* 50 Hz sample frequency */
+#define MMA8452_CTRL_ACTIVE BIT(0)
+
+#define MMA8452_DATA_CFG_FS_MASK (BIT(1) | BIT(0))
+#define MMA8452_DATA_CFG_FS_2G 0
+#define MMA8452_DATA_CFG_FS_4G 1
+#define MMA8452_DATA_CFG_FS_8G 2
+
+#define MMA8452_DEVICE_ID 0x2a
+
+struct mma8452_data {
+ struct i2c_client *client;
+ struct mutex lock;
+ u8 ctrl_reg1;
+ u8 data_cfg;
+};
+
+static int mma8452_drdy(struct mma8452_data *data)
+{
+ int tries = 150;
+
+ while (tries-- > 0) {
+ int ret = i2c_smbus_read_byte_data(data->client,
+ MMA8452_STATUS);
+ if (ret < 0)
+ return ret;
+ if ((ret & MMA8452_STATUS_DRDY) == MMA8452_STATUS_DRDY)
+ return 0;
+ msleep(20);
+ }
+
+ dev_err(&data->client->dev, "data not ready\n");
+ return -EIO;
+}
+
+static int mma8452_read(struct mma8452_data *data, __be16 buf[3])
+{
+ int ret = mma8452_drdy(data);
+ if (ret < 0)
+ return ret;
+ return i2c_smbus_read_i2c_block_data(data->client,
+ MMA8452_OUT_X, 3 * sizeof(__be16), (u8 *) buf);
+}
+
+static ssize_t mma8452_show_int_plus_micros(char *buf,
+ const int (*vals)[2], int n)
+{
+ size_t len = 0;
+
+ while (n-- > 0)
+ len += scnprintf(buf + len, PAGE_SIZE - len,
+ "%d.%06d ", vals[n][0], vals[n][1]);
+
+ /* replace trailing space by newline */
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static int mma8452_get_int_plus_micros_index(const int (*vals)[2], int n,
+ int val, int val2)
+{
+ while (n-- > 0)
+ if (val == vals[n][0] && val2 == vals[n][1])
+ return n;
+
+ return -EINVAL;
+}
+
+static const int mma8452_samp_freq[8][2] = {
+ {800, 0}, {400, 0}, {200, 0}, {100, 0}, {50, 0}, {12, 500000},
+ {6, 250000}, {1, 560000}
+};
+
+/*
+ * Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048
+ * The userspace interface uses m/s^2 and we declare micro units
+ * So scale factor is given by:
+ * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
+ */
+static const int mma8452_scales[3][2] = {
+ {0, 9577}, {0, 19154}, {0, 38307}
+};
+
+static ssize_t mma8452_show_samp_freq_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return mma8452_show_int_plus_micros(buf, mma8452_samp_freq,
+ ARRAY_SIZE(mma8452_samp_freq));
+}
+
+static ssize_t mma8452_show_scale_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return mma8452_show_int_plus_micros(buf, mma8452_scales,
+ ARRAY_SIZE(mma8452_scales));
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mma8452_show_samp_freq_avail);
+static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
+ mma8452_show_scale_avail, NULL, 0);
+
+static int mma8452_get_samp_freq_index(struct mma8452_data *data,
+ int val, int val2)
+{
+ return mma8452_get_int_plus_micros_index(mma8452_samp_freq,
+ ARRAY_SIZE(mma8452_samp_freq), val, val2);
+}
+
+static int mma8452_get_scale_index(struct mma8452_data *data,
+ int val, int val2)
+{
+ return mma8452_get_int_plus_micros_index(mma8452_scales,
+ ARRAY_SIZE(mma8452_scales), val, val2);
+}
+
+static int mma8452_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ __be16 buffer[3];
+ int i, ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
+ mutex_lock(&data->lock);
+ ret = mma8452_read(data, buffer);
+ mutex_unlock(&data->lock);
+ if (ret < 0)
+ return ret;
+ *val = sign_extend32(
+ be16_to_cpu(buffer[chan->scan_index]) >> 4, 11);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ i = data->data_cfg & MMA8452_DATA_CFG_FS_MASK;
+ *val = mma8452_scales[i][0];
+ *val2 = mma8452_scales[i][1];
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ i = (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >>
+ MMA8452_CTRL_DR_SHIFT;
+ *val = mma8452_samp_freq[i][0];
+ *val2 = mma8452_samp_freq[i][1];
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ ret = i2c_smbus_read_byte_data(data->client, MMA8452_OFF_X +
+ chan->scan_index);
+ if (ret < 0)
+ return ret;
+ *val = sign_extend32(ret, 7);
+ return IIO_VAL_INT;
+ }
+ return -EINVAL;
+}
+
+static int mma8452_standby(struct mma8452_data *data)
+{
+ return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
+ data->ctrl_reg1 & ~MMA8452_CTRL_ACTIVE);
+}
+
+static int mma8452_active(struct mma8452_data *data)
+{
+ return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
+ data->ctrl_reg1);
+}
+
+static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val)
+{
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ /* config can only be changed when in standby */
+ ret = mma8452_standby(data);
+ if (ret < 0)
+ goto fail;
+
+ ret = i2c_smbus_write_byte_data(data->client, reg, val);
+ if (ret < 0)
+ goto fail;
+
+ ret = mma8452_active(data);
+ if (ret < 0)
+ goto fail;
+
+ ret = 0;
+fail:
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static int mma8452_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int i;
+
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ i = mma8452_get_samp_freq_index(data, val, val2);
+ if (i < 0)
+ return -EINVAL;
+
+ data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
+ data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
+ return mma8452_change_config(data, MMA8452_CTRL_REG1,
+ data->ctrl_reg1);
+ case IIO_CHAN_INFO_SCALE:
+ i = mma8452_get_scale_index(data, val, val2);
+ if (i < 0)
+ return -EINVAL;
+ data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
+ data->data_cfg |= i;
+ return mma8452_change_config(data, MMA8452_DATA_CFG,
+ data->data_cfg);
+ case IIO_CHAN_INFO_CALIBBIAS:
+ if (val < -128 || val > 127)
+ return -EINVAL;
+ return mma8452_change_config(data, MMA8452_OFF_X +
+ chan->scan_index, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static irqreturn_t mma8452_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct mma8452_data *data = iio_priv(indio_dev);
+ u8 buffer[16]; /* 3 16-bit channels + padding + ts */
+ int ret;
+
+ ret = mma8452_read(data, (__be16 *) buffer);
+ if (ret < 0)
+ goto done;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+ iio_get_time_ns());
+
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+ return IRQ_HANDLED;
+}
+
+#define MMA8452_CHANNEL(axis, idx) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_CALIBBIAS), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = idx, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .shift = 4, \
+ .endianness = IIO_BE, \
+ }, \
+}
+
+static const struct iio_chan_spec mma8452_channels[] = {
+ MMA8452_CHANNEL(X, 0),
+ MMA8452_CHANNEL(Y, 1),
+ MMA8452_CHANNEL(Z, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static struct attribute *mma8452_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group mma8452_group = {
+ .attrs = mma8452_attributes,
+};
+
+static const struct iio_info mma8452_info = {
+ .attrs = &mma8452_group,
+ .read_raw = &mma8452_read_raw,
+ .write_raw = &mma8452_write_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static const unsigned long mma8452_scan_masks[] = {0x7, 0};
+
+static int mma8452_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mma8452_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
+ if (ret < 0)
+ return ret;
+ if (ret != MMA8452_DEVICE_ID)
+ return -ENODEV;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ mutex_init(&data->lock);
+
+ i2c_set_clientdata(client, indio_dev);
+ indio_dev->info = &mma8452_info;
+ indio_dev->name = id->name;
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = mma8452_channels;
+ indio_dev->num_channels = ARRAY_SIZE(mma8452_channels);
+ indio_dev->available_scan_masks = mma8452_scan_masks;
+
+ data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
+ (MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT);
+ ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1,
+ data->ctrl_reg1);
+ if (ret < 0)
+ return ret;
+
+ data->data_cfg = MMA8452_DATA_CFG_FS_2G;
+ ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG,
+ data->data_cfg);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ mma8452_trigger_handler, NULL);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0)
+ goto buffer_cleanup;
+ return 0;
+
+buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
+ return ret;
+}
+
+static int mma8452_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+ mma8452_standby(iio_priv(indio_dev));
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mma8452_suspend(struct device *dev)
+{
+ return mma8452_standby(iio_priv(i2c_get_clientdata(
+ to_i2c_client(dev))));
+}
+
+static int mma8452_resume(struct device *dev)
+{
+ return mma8452_active(iio_priv(i2c_get_clientdata(
+ to_i2c_client(dev))));
+}
+
+static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
+#define MMA8452_PM_OPS (&mma8452_pm_ops)
+#else
+#define MMA8452_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id mma8452_id[] = {
+ { "mma8452", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mma8452_id);
+
+static struct i2c_driver mma8452_driver = {
+ .driver = {
+ .name = "mma8452",
+ .pm = MMA8452_PM_OPS,
+ },
+ .probe = mma8452_probe,
+ .remove = mma8452_remove,
+ .id_table = mma8452_id,
+};
+module_i2c_driver(mma8452_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Freescale MMA8452 accelerometer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
new file mode 100644
index 00000000000..c3877630b2e
--- /dev/null
+++ b/drivers/iio/accel/st_accel.h
@@ -0,0 +1,56 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include <linux/iio/common/st_sensors.h>
+
+#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
+#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
+#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
+#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+
+/**
+* struct st_sensors_platform_data - default accel platform data
+* @drdy_int_pin: default accel DRDY is available on INT1 pin.
+*/
+static const struct st_sensors_platform_data default_accel_pdata = {
+ .drdy_int_pin = 1,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state);
+#define ST_ACCEL_TRIGGER_SET_STATE (&st_accel_trig_set_state)
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#define ST_ACCEL_TRIGGER_SET_STATE NULL
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 00000000000..a1e642ee13d
--- /dev/null
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,105 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_accel.h"
+
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+
+ return st_sensors_set_dataready_irq(indio_dev, state);
+}
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+ return st_sensors_set_enable(indio_dev, true);
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (adata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ err = st_sensors_set_axis_enable(indio_dev,
+ (u8)indio_dev->active_scan_mask[0]);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ return err;
+
+st_accel_buffer_postenable_error:
+ kfree(adata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_sensors_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+ kfree(adata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+ .preenable = &st_accel_buffer_preenable,
+ .postenable = &st_accel_buffer_postenable,
+ .predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 00000000000..a2abf7c2ce3
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,532 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_accel.h"
+
+#define ST_ACCEL_NUMBER_DATA_CHANNELS 3
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10
+#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x32
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0x18
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_2_PW_ADDR 0x20
+#define ST_ACCEL_2_PW_MASK 0xe0
+#define ST_ACCEL_2_FS_ADDR 0x23
+#define ST_ACCEL_2_FS_MASK 0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR 0x23
+#define ST_ACCEL_2_BDU_MASK 0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02
+#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x40
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0xf0
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_3_FS_ADDR 0x24
+#define ST_ACCEL_3_FS_MASK 0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR 0x20
+#define ST_ACCEL_3_BDU_MASK 0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80
+#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00
+#define ST_ACCEL_3_IG1_EN_ADDR 0x23
+#define ST_ACCEL_3_IG1_EN_MASK 0x08
+#define ST_ACCEL_3_MULTIREAD_BIT false
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
+ ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
+ ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
+ ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+ ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+ ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+ ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_accel_sensors[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3DH_ACCEL_DEV_NAME,
+ [1] = LSM303DLHC_ACCEL_DEV_NAME,
+ [2] = LSM330D_ACCEL_DEV_NAME,
+ [3] = LSM330DL_ACCEL_DEV_NAME,
+ [4] = LSM330DLC_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS331DLH_ACCEL_DEV_NAME,
+ [1] = LSM303DL_ACCEL_DEV_NAME,
+ [2] = LSM303DLH_ACCEL_DEV_NAME,
+ [3] = LSM303DLM_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .odr_avl = {
+ { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+ { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+ { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_PW_ADDR,
+ .mask = ST_ACCEL_2_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .sensors_supported = {
+ [0] = LSM330_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .odr_avl = {
+ { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_3_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_3_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_3_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ err = st_sensors_read_info_raw(indio_dev, ch, val);
+ if (err < 0)
+ goto read_error;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = adata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+ .write_raw = &st_accel_write_raw,
+};
+
+#ifdef CONFIG_IIO_TRIGGER
+static const struct iio_trigger_ops st_accel_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
+};
+#define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
+#else
+#define ST_ACCEL_TRIGGER_OPS NULL
+#endif
+
+int st_accel_common_probe(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *plat_data)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+ int irq = adata->get_irq_data_ready(indio_dev);
+ int err;
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &accel_info;
+
+ st_sensors_power_enable(indio_dev);
+
+ err = st_sensors_check_device_support(indio_dev,
+ ARRAY_SIZE(st_accel_sensors), st_accel_sensors);
+ if (err < 0)
+ return err;
+
+ adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
+ adata->multiread_bit = adata->sensor->multi_read_bit;
+ indio_dev->channels = adata->sensor->ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ adata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &adata->sensor->fs.fs_avl[0];
+ adata->odr = adata->sensor->odr.odr_avl[0].hz;
+
+ if (!plat_data)
+ plat_data =
+ (struct st_sensors_platform_data *)&default_accel_pdata;
+
+ err = st_sensors_init_sensor(indio_dev, plat_data);
+ if (err < 0)
+ return err;
+
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ return err;
+
+ if (irq > 0) {
+ err = st_sensors_allocate_trigger(indio_dev,
+ ST_ACCEL_TRIGGER_OPS);
+ if (err < 0)
+ goto st_accel_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_accel_device_register_error;
+
+ dev_info(&indio_dev->dev, "registered accelerometer %s\n",
+ indio_dev->name);
+
+ return 0;
+
+st_accel_device_register_error:
+ if (irq > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_accel_probe_trigger_error:
+ st_accel_deallocate_ring(indio_dev);
+
+ return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ st_sensors_power_disable(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+
+ st_accel_deallocate_ring(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 00000000000..d7bedbdfc81
--- /dev/null
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,79 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_i2c.h>
+#include "st_accel.h"
+
+static int st_accel_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adata));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, adata);
+
+ err = st_accel_common_probe(indio_dev, client->dev.platform_data);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int st_accel_i2c_remove(struct i2c_client *client)
+{
+ st_accel_common_remove(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-i2c",
+ },
+ .probe = st_accel_i2c_probe,
+ .remove = st_accel_i2c_remove,
+ .id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 00000000000..195639646e3
--- /dev/null
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,78 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_spi.h>
+#include "st_accel.h"
+
+static int st_accel_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adata));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, adata);
+
+ err = st_accel_common_probe(indio_dev, spi->dev.platform_data);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int st_accel_spi_remove(struct spi_device *spi)
+{
+ st_accel_common_remove(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-spi",
+ },
+ .probe = st_accel_spi_probe,
+ .remove = st_accel_spi_remove,
+ .id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-04 14:20:50 +0000