diff options
Diffstat (limited to 'drivers/ide')
94 files changed, 892 insertions, 1455 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 98ccfeb3f5a..a04c49f2a01 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -134,7 +134,7 @@ config BLK_DEV_IDECD module will be called ide-cd. config BLK_DEV_IDECD_VERBOSE_ERRORS - bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED + bool "Verbose error logging for IDE/ATAPI CDROM driver" if EXPERT depends on BLK_DEV_IDECD default y help @@ -197,8 +197,8 @@ comment "IDE chipset support/bugfixes" config IDE_GENERIC tristate "generic/default IDE chipset support" - depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC || ARCH_SHARK - default ARM && (ARCH_RPC || ARCH_SHARK) + depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC + default ARM && ARCH_RPC help This is the generic IDE driver. This driver attaches to the fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and @@ -322,12 +322,11 @@ config BLK_DEV_GENERIC which otherwise might not be supported. config BLK_DEV_OPTI621 - tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "OPTi 82C621 chipset enhanced support" select BLK_DEV_IDEPCI help This is a driver for the OPTi 82C621 EIDE controller. - Please read the comments at the top of <file:drivers/ide/pci/opti621.c>. + Please read the comments at the top of <file:drivers/ide/opti621.c>. config BLK_DEV_RZ1000 tristate "RZ1000 chipset bugfix/support" @@ -365,7 +364,7 @@ config BLK_DEV_ALI15X3 normal dual channel support. Please read the comments at the top of - <file:drivers/ide/pci/alim15x3.c>. + <file:drivers/ide/alim15x3.c>. If unsure, say N. @@ -417,7 +416,7 @@ config BLK_DEV_CY82C693 config BLK_DEV_CS5520 tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on X86_32 || COMPILE_TEST select BLK_DEV_IDEDMA_PCI help Include support for PIO tuning and virtual DMA on the Cyrix MediaGX @@ -428,6 +427,7 @@ config BLK_DEV_CS5520 config BLK_DEV_CS5530 tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support" + depends on X86_32 || COMPILE_TEST select BLK_DEV_IDEDMA_PCI help Include support for UDMA on the Cyrix MediaGX 5530 chipset. This @@ -437,7 +437,7 @@ config BLK_DEV_CS5530 config BLK_DEV_CS5535 tristate "AMD CS5535 chipset support" - depends on X86 && !X86_64 + depends on X86_32 select BLK_DEV_IDEDMA_PCI help Include support for UDMA on the NSC/AMD CS5535 companion chipset. @@ -488,6 +488,7 @@ config BLK_DEV_JMICRON config BLK_DEV_SC1200 tristate "National SCx200 chipset support" + depends on X86_32 || COMPILE_TEST select BLK_DEV_IDEDMA_PCI help This driver adds support for the on-board IDE controller on the @@ -528,7 +529,7 @@ config BLK_DEV_NS87415 This driver adds detection and support for the NS87415 chip (used mainly on SPARC64 and PA-RISC machines). - Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>. + Please read the comments at the top of <file:drivers/ide/ns87415.c>. config BLK_DEV_PDC202XX_OLD tristate "PROMISE PDC202{46|62|65|67} support" @@ -547,7 +548,7 @@ config BLK_DEV_PDC202XX_OLD for more than one card. Please read the comments at the top of - <file:drivers/ide/pci/pdc202xx_old.c>. + <file:drivers/ide/pdc202xx_old.c>. If unsure, say N. @@ -593,7 +594,7 @@ config BLK_DEV_SIS5513 ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740, SiS745, SiS750 - Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>. + Please read the comments at the top of <file:drivers/ide/sis5513.c>. config BLK_DEV_SL82C105 tristate "Winbond SL82c105 support" @@ -616,7 +617,7 @@ config BLK_DEV_SLC90E66 look-a-like to the PIIX4 it should be a nice addition. Please read the comments at the top of - <file:drivers/ide/pci/slc90e66.c>. + <file:drivers/ide/slc90e66.c>. config BLK_DEV_TRM290 tristate "Tekram TRM290 chipset support" @@ -625,7 +626,7 @@ config BLK_DEV_TRM290 This driver adds support for bus master DMA transfers using the Tekram TRM290 PCI IDE chip. Volunteers are needed for further tweaking and development. - Please read the comments at the top of <file:drivers/ide/pci/trm290.c>. + Please read the comments at the top of <file:drivers/ide/trm290.c>. config BLK_DEV_VIA82CXXX tristate "VIA82CXXX chipset support" @@ -677,19 +678,19 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 + depends on MIPS_ALCHEMY select IDE_XFER_MODE choice prompt "IDE Mode for AMD Alchemy Au1200" - default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + default BLK_DEV_IDE_AU1XXX_PIO_DBDMA + depends on BLK_DEV_IDE_AU1XXX config BLK_DEV_IDE_AU1XXX_PIO_DBDMA bool "PIO+DbDMA IDE for AMD Alchemy Au1200" config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + depends on BLK_DEV_IDE_AU1XXX endchoice config BLK_DEV_IDE_TX4938 @@ -702,11 +703,6 @@ config BLK_DEV_IDE_TX4939 depends on SOC_TX4939 select BLK_DEV_IDEDMA_SFF -config BLK_DEV_IDE_AT91 - tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support" - depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40 - select IDE_TIMINGS - config BLK_DEV_IDE_ICSIDE tristate "ICS IDE interface support" depends on ARM && ARCH_ACORN @@ -729,13 +725,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config IDE_H8300 - tristate "H8300 IDE support" - depends on H8300 - default y - help - Enables the H8300 IDE driver. - config BLK_DEV_GAYLE tristate "Amiga Gayle IDE interface support" depends on AMIGA @@ -761,8 +750,8 @@ config BLK_DEV_GAYLE use Gayle IDE interfaces on the Zorro expansion bus. config BLK_DEV_BUDDHA - tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" - depends on ZORRO && EXPERIMENTAL + tristate "Buddha/Catweasel/X-Surf IDE interface support" + depends on ZORRO help This is the IDE driver for the IDE interfaces on the Buddha, Catweasel and X-Surf expansion boards. It supports up to two interfaces on the @@ -836,7 +825,7 @@ config BLK_DEV_ALI14XX of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster I/O speeds to be set as well. See the files <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/ali14xx.c> for more info. + <file:drivers/ide/ali14xx.c> for more info. config BLK_DEV_DTC2278 tristate "DTC-2278 support" @@ -847,7 +836,7 @@ config BLK_DEV_DTC2278 boot parameter. It enables support for the secondary IDE interface of the DTC-2278 card, and permits faster I/O speeds to be set as well. See the <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/dtc2278.c> files for more info. + <file:drivers/ide/dtc2278.c> files for more info. config BLK_DEV_HT6560B tristate "Holtek HT6560B support" @@ -858,7 +847,7 @@ config BLK_DEV_HT6560B boot parameter. It enables support for the secondary IDE interface of the Holtek card, and permits faster I/O speeds to be set as well. See the <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/ht6560b.c> files for more info. + <file:drivers/ide/ht6560b.c> files for more info. config BLK_DEV_QD65XX tristate "QDI QD65xx support" @@ -867,7 +856,7 @@ config BLK_DEV_QD65XX help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the - <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> + <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c> for more info. config BLK_DEV_UMC8672 @@ -879,7 +868,7 @@ config BLK_DEV_UMC8672 boot parameter. It enables support for the secondary IDE interface of the UMC-8672, and permits faster I/O speeds to be set as well. See the files <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/umc8672.c> for more info. + <file:drivers/ide/umc8672.c> for more info. endif diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 81df925f0e8..a04ee82f1c8 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -2,7 +2,7 @@ # link order is important here # -EXTRA_CFLAGS += -Idrivers/ide +ccflags-y := -Idrivers/ide ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o \ @@ -78,8 +78,6 @@ obj-$(CONFIG_BLK_DEV_CMD640) += cmd640.o obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o -obj-$(CONFIG_IDE_H8300) += ide-h8300.o - obj-$(CONFIG_IDE_GENERIC) += ide-generic.o obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o @@ -116,4 +114,3 @@ obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o -obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c index 57d00caefc8..c7eaf20af92 100644 --- a/drivers/ide/aec62xx.c +++ b/drivers/ide/aec62xx.c @@ -181,7 +181,7 @@ static const struct ide_port_ops atp86x_port_ops = { .cable_detect = atp86x_cable_detect, }; -static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { +static const struct ide_port_info aec62xx_chipsets[] = { { /* 0: AEC6210 */ .name = DRV_NAME, .init_chipset = init_chipset_aec62xx, @@ -251,7 +251,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { * chips, pass a local copy of 'struct ide_port_info' down the call chain. */ -static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct chipset_bus_clock_list_entry *bus_clock; struct ide_port_info d; @@ -287,7 +287,7 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi return err; } -static void __devexit aec62xx_remove(struct pci_dev *dev) +static void aec62xx_remove(struct pci_dev *dev) { ide_pci_remove(dev); pci_disable_device(dev); @@ -307,7 +307,7 @@ static struct pci_driver aec62xx_pci_driver = { .name = "AEC62xx_IDE", .id_table = aec62xx_pci_tbl, .probe = aec62xx_init_one, - .remove = __devexit_p(aec62xx_remove), + .remove = aec62xx_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c index 25b9fe3a9f8..8f3570ee64c 100644 --- a/drivers/ide/ali14xx.c +++ b/drivers/ide/ali14xx.c @@ -52,13 +52,13 @@ /* port addresses for auto-detection */ #define ALI_NUM_PORTS 4 -static const int ports[ALI_NUM_PORTS] __initdata = +static const int ports[ALI_NUM_PORTS] __initconst = { 0x074, 0x0f4, 0x034, 0x0e4 }; /* register initialization data */ typedef struct { u8 reg, data; } RegInitializer; -static const RegInitializer initData[] __initdata = { +static const RegInitializer initData[] __initconst = { {0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00}, {0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00}, @@ -221,7 +221,7 @@ static int __init ali14xx_probe(void) return ide_legacy_device_add(&ali14xx_port_info, 0); } -static int probe_ali14xx; +static bool probe_ali14xx; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets"); diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index 2c8016ad0e2..36f76e28a0b 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -415,7 +415,7 @@ static u8 ali_cable_detect(ide_hwif_t *hwif) * Sparc systems. */ -static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) +static void init_hwif_ali15x3(ide_hwif_t *hwif) { u8 ideic, inmir; s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, @@ -464,8 +464,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) * Set up the DMA functionality on the ALi 15x3. */ -static int __devinit init_dma_ali15x3(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int init_dma_ali15x3(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long base = ide_pci_dma_base(hwif, d); @@ -512,7 +511,7 @@ static const struct ide_dma_ops ali_dma_ops = { .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info ali15x3_chipset __devinitdata = { +static const struct ide_port_info ali15x3_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_ali15x3, .init_hwif = init_hwif_ali15x3, @@ -532,7 +531,8 @@ static const struct ide_port_info ali15x3_chipset __devinitdata = { * hot plug layer. */ -static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int alim15x3_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { struct ide_port_info d = ali15x3_chipset; u8 rev = dev->revision, idx = id->driver_data; diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 3747b2561f0..cbfe846911d 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -223,7 +223,7 @@ static const struct ide_port_ops amd_port_ops = { .udma_mask = udma, \ } -static const struct ide_port_info amd74xx_chipsets[] __devinitdata = { +static const struct ide_port_info amd74xx_chipsets[] = { /* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2), /* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4), /* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5), @@ -235,7 +235,7 @@ static const struct ide_port_info amd74xx_chipsets[] __devinitdata = { /* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5), }; -static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) +static int amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d; u8 idx = id->driver_data; diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c deleted file mode 100644 index 000a78e5246..00000000000 --- a/drivers/ide/at91_ide.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller - * with Compact Flash True IDE logic - * - * Copyright (c) 2008, 2009 Kelvatek Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/ide.h> -#include <linux/platform_device.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#define DRV_NAME "at91_ide" - -#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args) -#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args) - -/* - * Access to IDE device is possible through EBI Static Memory Controller - * with Compact Flash logic. For details see EBI and SMC datasheet sections - * of any microcontroller from AT91SAM9 family. - * - * Within SMC chip select address space, lines A[23:21] distinguish Compact - * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are: - * 0x00c0000 - True IDE - * 0x00e0000 - Alternate True IDE (Alt Status Register) - * - * On True IDE mode Task File and Data Register are mapped at the same address. - * To distinguish access between these two different bus data width is used: - * 8Bit for Task File, 16Bit for Data I/O. - * - * After initialization we do 8/16 bit flipping (changes in SMC MODE register) - * only inside IDE callback routines which are serialized by IDE layer, - * so no additional locking needed. - */ - -#define TASK_FILE 0x00c00000 -#define ALT_MODE 0x00e00000 -#define REGS_SIZE 8 - -#define enter_16bit(cs, mode) do { \ - mode = at91_sys_read(AT91_SMC_MODE(cs)); \ - at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \ -} while (0) - -#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode); - -static void set_smc_timings(const u8 chipselect, const u16 cycle, - const u16 setup, const u16 pulse, - const u16 data_float, int use_iordy) -{ - unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_BAT_SELECT; - - /* disable or enable waiting for IORDY signal */ - if (use_iordy) - mode |= AT91_SMC_EXNWMODE_READY; - - /* add data float cycles if needed */ - if (data_float) - mode |= AT91_SMC_TDF_(data_float); - - at91_sys_write(AT91_SMC_MODE(chipselect), mode); - - /* setup timings in SMC */ - at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) | - AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(setup) | - AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) | - AT91_SMC_NCS_WRPULSE_(cycle) | - AT91_SMC_NRDPULSE_(pulse) | - AT91_SMC_NCS_RDPULSE_(cycle)); - at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) | - AT91_SMC_NRDCYCLE_(cycle)); -} - -static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz) -{ - u64 tmp = ns; - - tmp *= mck_hz; - tmp += 1000*1000*1000 - 1; /* round up */ - do_div(tmp, 1000*1000*1000); - return (unsigned int) tmp; -} - -static void apply_timings(const u8 chipselect, const u8 pio, - const struct ide_timing *timing, int use_iordy) -{ - unsigned int t0, t1, t2, t6z; - unsigned int cycle, setup, pulse, data_float; - unsigned int mck_hz; - struct clk *mck; - - /* see table 22 of Compact Flash standard 4.1 for the meaning, - * we do not stretch active (t2) time, so setup (t1) + hold time (th) - * assure at least minimal recovery (t2i) time */ - t0 = timing->cyc8b; - t1 = timing->setup; - t2 = timing->act8b; - t6z = (pio < 5) ? 30 : 20; - - pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z); - - mck = clk_get(NULL, "mck"); - BUG_ON(IS_ERR(mck)); - mck_hz = clk_get_rate(mck); - pdbg("mck_hz=%u\n", mck_hz); - - cycle = calc_mck_cycles(t0, mck_hz); - setup = calc_mck_cycles(t1, mck_hz); - pulse = calc_mck_cycles(t2, mck_hz); - data_float = calc_mck_cycles(t6z, mck_hz); - - pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n", - cycle, setup, pulse, data_float); - - set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy); -} - -static void at91_ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - u8 chipselect = hwif->select_data; - unsigned long mode; - - pdbg("cs %u buf %p len %d\n", chipselect, buf, len); - - len++; - - enter_16bit(chipselect, mode); - readsw((void __iomem *)io_ports->data_addr, buf, len / 2); - leave_16bit(chipselect, mode); -} - -static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - u8 chipselect = hwif->select_data; - unsigned long mode; - - pdbg("cs %u buf %p len %d\n", chipselect, buf, len); - - enter_16bit(chipselect, mode); - writesw((void __iomem *)io_ports->data_addr, buf, len / 2); - leave_16bit(chipselect, mode); -} - -static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct ide_timing *timing; - u8 chipselect = hwif->select_data; - int use_iordy = 0; - const u8 pio = drive->pio_mode - XFER_PIO_0; - - pdbg("chipselect %u pio %u\n", chipselect, pio); - - timing = ide_timing_find_mode(XFER_PIO_0 + pio); - BUG_ON(!timing); - - if (ide_pio_need_iordy(drive, pio)) - use_iordy = 1; - - apply_timings(chipselect, pio, timing, use_iordy); -} - -static const struct ide_tp_ops at91_ide_tp_ops = { - .exec_command = ide_exec_command, - .read_status = ide_read_status, - .read_altstatus = ide_read_altstatus, - .write_devctl = ide_write_devctl, - - .dev_select = ide_dev_select, - .tf_load = ide_tf_load, - .tf_read = ide_tf_read, - - .input_data = at91_ide_input_data, - .output_data = at91_ide_output_data, -}; - -static const struct ide_port_ops at91_ide_port_ops = { - .set_pio_mode = at91_ide_set_pio_mode, -}; - -static const struct ide_port_info at91_ide_port_info __initdata = { - .port_ops = &at91_ide_port_ops, - .tp_ops = &at91_ide_tp_ops, - .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE | - IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS, - .pio_mask = ATA_PIO6, - .chipset = ide_generic, -}; - -/* - * If interrupt is delivered through GPIO, IRQ are triggered on falling - * and rising edge of signal. Whereas IDE device request interrupt on high - * level (rising edge in our case). This mean we have fake interrupts, so - * we need to check interrupt pin and exit instantly from ISR when line - * is on low level. - */ - -irqreturn_t at91_irq_handler(int irq, void *dev_id) -{ - int ntries = 8; - int pin_val1, pin_val2; - - /* additional deglitch, line can be noisy in badly designed PCB */ - do { - pin_val1 = at91_get_gpio_value(irq); - pin_val2 = at91_get_gpio_value(irq); - } while (pin_val1 != pin_val2 && --ntries > 0); - - if (pin_val1 == 0 || ntries <= 0) - return IRQ_HANDLED; - - return ide_intr(irq, dev_id); -} - -static int __init at91_ide_probe(struct platform_device *pdev) -{ - int ret; - struct ide_hw hw, *hws[] = { &hw }; - struct ide_host *host; - struct resource *res; - unsigned long tf_base = 0, ctl_base = 0; - struct at91_cf_data *board = pdev->dev.platform_data; - - if (!board) - return -ENODEV; - - if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) { - perr("no device detected\n"); - return -ENODEV; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - perr("can't get memory resource\n"); - return -ENODEV; - } - - if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE, - REGS_SIZE, "ide") || - !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE, - REGS_SIZE, "alt")) { - perr("memory resources in use\n"); - return -EBUSY; - } - - pdbg("chipselect %u irq %u res %08lx\n", board->chipselect, - board->irq_pin, (unsigned long) res->start); - - tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE, - REGS_SIZE); - ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE, - REGS_SIZE); - if (!tf_base || !ctl_base) { - perr("can't map memory regions\n"); - return -EBUSY; - } - - memset(&hw, 0, sizeof(hw)); - - if (board->flags & AT91_IDE_SWAP_A0_A2) { - /* workaround for stupid hardware bug */ - hw.io_ports.data_addr = tf_base + 0; - hw.io_ports.error_addr = tf_base + 4; - hw.io_ports.nsect_addr = tf_base + 2; - hw.io_ports.lbal_addr = tf_base + 6; - hw.io_ports.lbam_addr = tf_base + 1; - hw.io_ports.lbah_addr = tf_base + 5; - hw.io_ports.device_addr = tf_base + 3; - hw.io_ports.command_addr = tf_base + 7; - hw.io_ports.ctl_addr = ctl_base + 3; - } else - ide_std_init_ports(&hw, tf_base, ctl_base + 6); - - hw.irq = board->irq_pin; - hw.dev = &pdev->dev; - - host = ide_host_alloc(&at91_ide_port_info, hws, 1); - if (!host) { - perr("failed to allocate ide host\n"); - return -ENOMEM; - } - - /* setup Static Memory Controller - PIO 0 as default */ - apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0); - - /* with GPIO interrupt we have to do quirks in handler */ - if (board->irq_pin >= PIN_BASE) - host->irq_handler = at91_irq_handler; - - host->ports[0]->select_data = board->chipselect; - - ret = ide_host_register(host, &at91_ide_port_info, hws); - if (ret) { - perr("failed to register ide host\n"); - goto err_free_host; - } - platform_set_drvdata(pdev, host); - return 0; - -err_free_host: - ide_host_free(host); - return ret; -} - -static int __exit at91_ide_remove(struct platform_device *pdev) -{ - struct ide_host *host = platform_get_drvdata(pdev); - - ide_host_remove(host); - return 0; -} - -static struct platform_driver at91_ide_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, - .remove = __exit_p(at91_ide_remove), -}; - -static int __init at91_ide_init(void) -{ - return platform_driver_probe(&at91_ide_driver, at91_ide_probe); -} - -static void __exit at91_ide_exit(void) -{ - platform_driver_unregister(&at91_ide_driver); -} - -module_init(at91_ide_init); -module_exit(at91_ide_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>"); - diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c index 15f0ead89f5..dbd0f242ec1 100644 --- a/drivers/ide/atiixp.c +++ b/drivers/ide/atiixp.c @@ -139,7 +139,7 @@ static const struct ide_port_ops atiixp_port_ops = { .cable_detect = atiixp_cable_detect, }; -static const struct ide_port_info atiixp_pci_info[] __devinitdata = { +static const struct ide_port_info atiixp_pci_info[] = { { /* 0: IXP200/300/400/700 */ .name = DRV_NAME, .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, @@ -168,7 +168,7 @@ static const struct ide_port_info atiixp_pci_info[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL); } diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index b26c23416fa..259786ca8b7 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -36,13 +36,17 @@ #include <linux/ide.h> #include <linux/scatterlist.h> -#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1xxx_ide.h> #define DRV_NAME "au1200-ide" #define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>" +#ifndef IDE_REG_SHIFT +#define IDE_REG_SHIFT 5 +#endif + /* enable the burstmode in the dbdma */ #define IDE_AU1XXX_BURSTMODE 1 @@ -317,10 +321,11 @@ static void auide_ddma_rx_callback(int irq, void *param) } #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ -static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags) +static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, + u32 devwidth, u32 flags, u32 regbase) { dev->dev_id = dev_id; - dev->dev_physaddr = (u32)IDE_PHYS_ADDR; + dev->dev_physaddr = CPHYSADDR(regbase); dev->dev_intlevel = 0; dev->dev_intpolarity = 0; dev->dev_tsize = tsize; @@ -344,7 +349,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; - dev_id = IDE_DDMA_REQ; + dev_id = hwif->ddma_id; tsize = 8; /* 1 */ devwidth = 32; /* 16 */ @@ -356,20 +361,17 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #endif /* setup dev_tab for tx channel */ - auide_init_dbdma_dev( &source_dev_tab, - dev_id, - tsize, devwidth, DEV_FLAGS_OUT | flags); + auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth, + DEV_FLAGS_OUT | flags, auide->regbase); auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - auide_init_dbdma_dev( &source_dev_tab, - dev_id, - tsize, devwidth, DEV_FLAGS_IN | flags); + auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth, + DEV_FLAGS_IN | flags, auide->regbase); auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); /* We also need to add a target device for the DMA */ - auide_init_dbdma_dev( &target_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - tsize, devwidth, DEV_FLAGS_ANYUSE); + auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize, + devwidth, DEV_FLAGS_ANYUSE, auide->regbase); auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); /* Get a channel for TX */ @@ -411,14 +413,12 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #endif /* setup dev_tab for tx channel */ - auide_init_dbdma_dev( &source_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - 8, 32, DEV_FLAGS_OUT | flags); + auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32, + DEV_FLAGS_OUT | flags, auide->regbase); auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - auide_init_dbdma_dev( &source_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - 8, 32, DEV_FLAGS_IN | flags); + auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32, + DEV_FLAGS_IN | flags, auide->regbase); auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); /* Get a channel for TX */ @@ -540,6 +540,14 @@ static int au_ide_probe(struct platform_device *dev) goto out; } + res = platform_get_resource(dev, IORESOURCE_DMA, 0); + if (!res) { + pr_debug("%s: no DDMA ID resource\n", DRV_NAME); + ret = -ENODEV; + goto out; + } + ahwif->ddma_id = res->start; + memset(&hw, 0, sizeof(hw)); auide_setup_ports(&hw, ahwif); hw.irq = ahwif->irq; diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c index ab4f169d083..46eaf58d881 100644 --- a/drivers/ide/buddha.c +++ b/drivers/ide/buddha.c @@ -23,6 +23,7 @@ #include <linux/zorro.h> #include <linux/ide.h> #include <linux/init.h> +#include <linux/module.h> #include <asm/amigahw.h> #include <asm/amigaints.h> @@ -197,7 +198,7 @@ fail_base2: continue; } } - buddha_board = ZTWO_VADDR(board); + buddha_board = (unsigned long)ZTWO_VADDR(board); /* write to BUDDHA_IRQ_MR to enable the board IRQ */ /* X-Surf doesn't have this. IRQs are always on */ diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c index d2b8b272bc2..70f0a2754c1 100644 --- a/drivers/ide/cmd640.c +++ b/drivers/ide/cmd640.c @@ -105,12 +105,13 @@ #include <linux/delay.h> #include <linux/ide.h> #include <linux/init.h> +#include <linux/module.h> #include <asm/io.h> #define DRV_NAME "cmd640" -static int cmd640_vlb; +static bool cmd640_vlb; /* * CMD640 specific registers definition. @@ -633,12 +634,10 @@ static void __init cmd640_init_dev(ide_drive_t *drive) static int cmd640_test_irq(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); int irq_reg = hwif->channel ? ARTTIM23 : CFR; - u8 irq_stat, irq_mask = hwif->channel ? ARTTIM23_IDE23INTR : + u8 irq_mask = hwif->channel ? ARTTIM23_IDE23INTR : CFR_IDE01INTR; - - pci_read_config_byte(dev, irq_reg, &irq_stat); + u8 irq_stat = get_cmd640_reg(irq_reg); return (irq_stat & irq_mask) ? 1 : 0; } @@ -686,7 +685,7 @@ static int pci_conf2(void) return 0; } -static const struct ide_port_info cmd640_port_info __initdata = { +static const struct ide_port_info cmd640_port_info __initconst = { .chipset = ide_cmd640, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA | diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c index 5f80312e636..b127ed60c73 100644 --- a/drivers/ide/cmd64x.c +++ b/drivers/ide/cmd64x.c @@ -327,7 +327,7 @@ static const struct ide_dma_ops cmd646_rev1_dma_ops = { .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { +static const struct ide_port_info cmd64x_chipsets[] = { { /* 0: CMD643 */ .name = DRV_NAME, .init_chipset = init_chipset_cmd64x, @@ -373,7 +373,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { } }; -static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d; u8 idx = id->driver_data; diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c index 2c1e5f7cd26..6250aee3050 100644 --- a/drivers/ide/cs5520.c +++ b/drivers/ide/cs5520.c @@ -94,7 +94,7 @@ static const struct ide_port_ops cs5520_port_ops = { .set_dma_mode = cs5520_set_dma_mode, }; -static const struct ide_port_info cyrix_chipset __devinitdata = { +static const struct ide_port_info cyrix_chipset = { .name = DRV_NAME, .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } }, .port_ops = &cs5520_port_ops, @@ -108,7 +108,7 @@ static const struct ide_port_info cyrix_chipset __devinitdata = { * work longhand. */ -static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &cyrix_chipset; struct ide_hw hw[2], *hws[] = { NULL, NULL }; diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c index 4dc4eb92b07..65371599b97 100644 --- a/drivers/ide/cs5530.c +++ b/drivers/ide/cs5530.c @@ -226,7 +226,7 @@ out: * performs channel-specific pre-initialization before drive probing. */ -static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) +static void init_hwif_cs5530 (ide_hwif_t *hwif) { unsigned long basereg; u32 d0_timings; @@ -245,7 +245,7 @@ static const struct ide_port_ops cs5530_port_ops = { .udma_filter = cs5530_udma_filter, }; -static const struct ide_port_info cs5530_chipset __devinitdata = { +static const struct ide_port_info cs5530_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_cs5530, .init_hwif = init_hwif_cs5530, @@ -257,7 +257,7 @@ static const struct ide_port_info cs5530_chipset __devinitdata = { .udma_mask = ATA_UDMA2, }; -static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &cs5530_chipset, NULL); } diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c index 5059fafadf2..3bc5b9a3401 100644 --- a/drivers/ide/cs5535.c +++ b/drivers/ide/cs5535.c @@ -170,7 +170,7 @@ static const struct ide_port_ops cs5535_port_ops = { .cable_detect = cs5535_cable_detect, }; -static const struct ide_port_info cs5535_chipset __devinitdata = { +static const struct ide_port_info cs5535_chipset = { .name = DRV_NAME, .port_ops = &cs5535_port_ops, .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE, @@ -179,8 +179,7 @@ static const struct ide_port_info cs5535_chipset __devinitdata = { .udma_mask = ATA_UDMA4, }; -static int __devinit cs5535_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &cs5535_chipset, NULL); } diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c index 24214ab60ac..de9185db41d 100644 --- a/drivers/ide/cs5536.c +++ b/drivers/ide/cs5536.c @@ -295,15 +295,7 @@ static struct pci_driver cs5536_pci_driver = { .resume = ide_pci_resume, }; -static int __init cs5536_init(void) -{ - return pci_register_driver(&cs5536_pci_driver); -} - -static void __exit cs5536_exit(void) -{ - pci_unregister_driver(&cs5536_pci_driver); -} +module_pci_driver(cs5536_pci_driver); MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); @@ -312,6 +304,3 @@ MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl); module_param_named(msr, use_msr, int, 0644); MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); - -module_init(cs5536_init); -module_exit(cs5536_exit); diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index 9383f67deae..f5820079a28 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator - * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz * * CYPRESS CY82C693 chipset IDE controller * @@ -67,7 +67,7 @@ static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) /* * note: below we set the value for Bus Master IDE TimeOut Register - * I'm not absolutly sure what this does, but it solved my problem + * I'm not absolutely sure what this does, but it solved my problem * with IDE DMA and sound, so I now can play sound and work with * my IDE driver at the same time :-) * @@ -90,7 +90,7 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) u8 time_16, time_8; /* select primary or secondary channel */ - if (hwif->index > 0) { /* drive is on the secondary channel */ + if (drive->dn > 1) { /* drive is on the secondary channel */ dev = pci_get_slot(dev->bus, dev->devfn+1); if (!dev) { printk(KERN_ERR "%s: tune_drive: " @@ -141,9 +141,11 @@ static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16); pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8); } + if (drive->dn > 1) + pci_dev_put(dev); } -static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) +static void init_iops_cy82c693(ide_hwif_t *hwif) { static ide_hwif_t *primary; struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -161,7 +163,7 @@ static const struct ide_port_ops cy82c693_port_ops = { .set_dma_mode = cy82c693_set_dma_mode, }; -static const struct ide_port_info cy82c693_chipset __devinitdata = { +static const struct ide_port_info cy82c693_chipset = { .name = DRV_NAME, .init_iops = init_iops_cy82c693, .port_ops = &cy82c693_port_ops, @@ -171,7 +173,8 @@ static const struct ide_port_info cy82c693_chipset __devinitdata = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int cy82c693_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { struct pci_dev *dev2; int ret = -ENODEV; @@ -188,7 +191,7 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev return ret; } -static void __devexit cy82c693_remove(struct pci_dev *dev) +static void cy82c693_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; @@ -207,7 +210,7 @@ static struct pci_driver cy82c693_pci_driver = { .name = "Cypress_IDE", .id_table = cy82c693_pci_tbl, .probe = cy82c693_init_one, - .remove = __devexit_p(cy82c693_remove), + .remove = cy82c693_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/delkin_cb.c b/drivers/ide/delkin_cb.c index 1e10eba62ce..300daabaa57 100644 --- a/drivers/ide/delkin_cb.c +++ b/drivers/ide/delkin_cb.c @@ -71,8 +71,7 @@ static const struct ide_port_info delkin_cb_port_info = { .chipset = ide_pci, }; -static int __devinit -delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) +static int delkin_cb_probe(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_host *host; unsigned long base; @@ -158,7 +157,7 @@ static int delkin_cb_resume(struct pci_dev *dev) #define delkin_cb_resume NULL #endif -static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = { +static struct pci_device_id delkin_cb_pci_tbl[] = { { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 0, }, @@ -174,18 +173,7 @@ static struct pci_driver delkin_cb_pci_driver = { .resume = delkin_cb_resume, }; -static int __init delkin_cb_init(void) -{ - return pci_register_driver(&delkin_cb_pci_driver); -} - -static void __exit delkin_cb_exit(void) -{ - pci_unregister_driver(&delkin_cb_pci_driver); -} - -module_init(delkin_cb_init); -module_exit(delkin_cb_exit); +module_pci_driver(delkin_cb_pci_driver); MODULE_AUTHOR("Mark Lord"); MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE"); diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c index 6929f7fce93..8722df329cb 100644 --- a/drivers/ide/dtc2278.c +++ b/drivers/ide/dtc2278.c @@ -91,7 +91,7 @@ static const struct ide_port_ops dtc2278_port_ops = { .set_pio_mode = dtc2278_set_pio_mode, }; -static const struct ide_port_info dtc2278_port_info __initdata = { +static const struct ide_port_info dtc2278_port_info __initconst = { .name = DRV_NAME, .chipset = ide_dtc2278, .port_ops = &dtc2278_port_ops, @@ -130,7 +130,7 @@ static int __init dtc2278_probe(void) return ide_legacy_device_add(&dtc2278_port_info, 0); } -static int probe_dtc2278; +static bool probe_dtc2278; module_param_named(probe, probe_dtc2278, bool, 0); MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets"); diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c index b9e517de6a8..97a2f9dc75d 100644 --- a/drivers/ide/gayle.c +++ b/drivers/ide/gayle.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/zorro.h> #include <linux/module.h> +#include <linux/platform_device.h> #include <asm/setup.h> #include <asm/amigahw.h> @@ -24,15 +25,6 @@ /* - * Bases of the IDE interfaces - */ - -#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */ -#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */ - -#define GAYLE_IDEREG_SIZE 0x2000 - - /* * Offsets from one of the above bases */ @@ -58,7 +50,7 @@ GAYLE_NUM_HWIFS-1) #define GAYLE_HAS_CONTROL_REG (!ide_doubler) -static int ide_doubler; +static bool ide_doubler; module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); @@ -68,20 +60,20 @@ MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); static int gayle_test_irq(ide_hwif_t *hwif) { - unsigned char ch; + unsigned char ch; - ch = z_readb(hwif->io_ports.irq_addr); - if (!(ch & GAYLE_IRQ_IDE)) - return 0; - return 1; + ch = z_readb(hwif->io_ports.irq_addr); + if (!(ch & GAYLE_IRQ_IDE)) + return 0; + return 1; } static void gayle_a1200_clear_irq(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + ide_hwif_t *hwif = drive->hwif; - (void)z_readb(hwif->io_ports.status_addr); - z_writeb(0x7c, hwif->io_ports.irq_addr); + (void)z_readb(hwif->io_ports.status_addr); + z_writeb(0x7c, hwif->io_ports.irq_addr); } static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base, @@ -122,64 +114,76 @@ static const struct ide_port_info gayle_port_info = { * Probe for a Gayle IDE interface (and optionally for an IDE doubler) */ -static int __init gayle_init(void) +static int __init amiga_gayle_ide_probe(struct platform_device *pdev) { - unsigned long phys_base, res_start, res_n; - unsigned long base, ctrlport, irqport; - int a4000, i, rc; - struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS]; - struct ide_port_info d = gayle_port_info; - - if (!MACH_IS_AMIGA) - return -ENODEV; - - if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE)) - goto found; - -#ifdef CONFIG_ZORRO - if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE, - NULL)) - goto found; -#endif - return -ENODEV; - -found: - printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n", - a4000 ? 4000 : 1200, - ide_doubler ? ", IDE doubler" : ""); - - if (a4000) { - phys_base = GAYLE_BASE_4000; - irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000); - d.port_ops = &gayle_a4000_port_ops; - } else { - phys_base = GAYLE_BASE_1200; - irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200); - d.port_ops = &gayle_a1200_port_ops; - } - - res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1); - res_n = GAYLE_IDEREG_SIZE; - - if (!request_mem_region(res_start, res_n, "IDE")) + struct resource *res; + struct gayle_ide_platform_data *pdata; + unsigned long base, ctrlport, irqport; + unsigned int i; + int error; + struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS]; + struct ide_port_info d = gayle_port_info; + struct ide_host *host; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + if (!request_mem_region(res->start, resource_size(res), "IDE")) return -EBUSY; - for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) { - base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT); - ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0; + pdata = dev_get_platdata(&pdev->dev); + pr_info("ide: Gayle IDE controller (A%u style%s)\n", + pdata->explicit_ack ? 1200 : 4000, + ide_doubler ? ", IDE doubler" : ""); + + base = (unsigned long)ZTWO_VADDR(pdata->base); + ctrlport = 0; + irqport = (unsigned long)ZTWO_VADDR(pdata->irqport); + if (pdata->explicit_ack) + d.port_ops = &gayle_a1200_port_ops; + else + d.port_ops = &gayle_a4000_port_ops; + + for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++, base += GAYLE_NEXT_PORT) { + if (GAYLE_HAS_CONTROL_REG) + ctrlport = base + GAYLE_CONTROL; + + gayle_setup_ports(&hw[i], base, ctrlport, irqport); + hws[i] = &hw[i]; + } + + error = ide_host_add(&d, hws, i, &host); + if (error) + goto out; - gayle_setup_ports(&hw[i], base, ctrlport, irqport); + platform_set_drvdata(pdev, host); + return 0; - hws[i] = &hw[i]; - } +out: + release_mem_region(res->start, resource_size(res)); + return error; +} - rc = ide_host_add(&d, hws, i, NULL); - if (rc) - release_mem_region(res_start, res_n); +static int __exit amiga_gayle_ide_remove(struct platform_device *pdev) +{ + struct ide_host *host = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - return rc; + ide_host_remove(host); + release_mem_region(res->start, resource_size(res)); + return 0; } -module_init(gayle_init); +static struct platform_driver amiga_gayle_ide_driver = { + .remove = __exit_p(amiga_gayle_ide_remove), + .driver = { + .name = "amiga-gayle-ide", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:amiga-gayle-ide"); diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index b885c1d548f..696b6c1ec94 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -12,7 +12,7 @@ * * * HighPoint has its own drivers (open source except for the RAID part) - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. + * available from http://www.highpoint-tech.com/USA_new/service_support.htm * This may be useful to anyone wanting to work on this driver, however do not * trust them too much since the code tends to become less and less meaningful * as the time passes... :-/ @@ -128,6 +128,7 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> +#include <linux/slab.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -442,7 +443,7 @@ static struct hpt_timings hpt37x_timings = { } }; -static const struct hpt_info hpt36x __devinitdata = { +static const struct hpt_info hpt36x = { .chip_name = "HPT36x", .chip_type = HPT36x, .udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2, @@ -450,7 +451,7 @@ static const struct hpt_info hpt36x __devinitdata = { .timings = &hpt36x_timings }; -static const struct hpt_info hpt370 __devinitdata = { +static const struct hpt_info hpt370 = { .chip_name = "HPT370", .chip_type = HPT370, .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4, @@ -458,7 +459,7 @@ static const struct hpt_info hpt370 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt370a __devinitdata = { +static const struct hpt_info hpt370a = { .chip_name = "HPT370A", .chip_type = HPT370A, .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4, @@ -466,7 +467,7 @@ static const struct hpt_info hpt370a __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt374 __devinitdata = { +static const struct hpt_info hpt374 = { .chip_name = "HPT374", .chip_type = HPT374, .udma_mask = ATA_UDMA5, @@ -474,7 +475,7 @@ static const struct hpt_info hpt374 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt372 __devinitdata = { +static const struct hpt_info hpt372 = { .chip_name = "HPT372", .chip_type = HPT372, .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -482,7 +483,7 @@ static const struct hpt_info hpt372 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt372a __devinitdata = { +static const struct hpt_info hpt372a = { .chip_name = "HPT372A", .chip_type = HPT372A, .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -490,7 +491,7 @@ static const struct hpt_info hpt372a __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt302 __devinitdata = { +static const struct hpt_info hpt302 = { .chip_name = "HPT302", .chip_type = HPT302, .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -498,7 +499,7 @@ static const struct hpt_info hpt302 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt371 __devinitdata = { +static const struct hpt_info hpt371 = { .chip_name = "HPT371", .chip_type = HPT371, .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -506,7 +507,7 @@ static const struct hpt_info hpt371 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt372n __devinitdata = { +static const struct hpt_info hpt372n = { .chip_name = "HPT372N", .chip_type = HPT372N, .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -514,7 +515,7 @@ static const struct hpt_info hpt372n __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt302n __devinitdata = { +static const struct hpt_info hpt302n = { .chip_name = "HPT302N", .chip_type = HPT302N, .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -522,7 +523,7 @@ static const struct hpt_info hpt302n __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt371n __devinitdata = { +static const struct hpt_info hpt371n = { .chip_name = "HPT371N", .chip_type = HPT371N, .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -837,7 +838,7 @@ static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode) static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) { - hpt3xxn_set_clock(drive->hwif, rq_data_dir(rq) ? 0x23 : 0x21); + hpt3xxn_set_clock(drive->hwif, rq_data_dir(rq) ? 0x21 : 0x23); } /** @@ -1172,8 +1173,9 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) u16 mcr; pci_read_config_word(dev, mcr_addr, &mcr); - pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); - /* now read cable id register */ + pci_write_config_word(dev, mcr_addr, mcr | 0x8000); + /* Debounce, then read cable ID register */ + udelay(10); pci_read_config_byte(dev, 0x5a, &scr1); pci_write_config_word(dev, mcr_addr, mcr); } else if (chip_type >= HPT370) { @@ -1184,17 +1186,18 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) u8 scr2 = 0; pci_read_config_byte(dev, 0x5b, &scr2); - pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); - /* now read cable id register */ + pci_write_config_byte(dev, 0x5b, scr2 & ~1); + /* Debounce, then read cable ID register */ + udelay(10); pci_read_config_byte(dev, 0x5a, &scr1); - pci_write_config_byte(dev, 0x5b, scr2); + pci_write_config_byte(dev, 0x5b, scr2); } else pci_read_config_byte(dev, 0x5a, &scr1); return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) +static void init_hwif_hpt366(ide_hwif_t *hwif) { struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 chip_type = info->chip_type; @@ -1218,7 +1221,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) } } -static int __devinit init_dma_hpt366(ide_hwif_t *hwif, +static int init_dma_hpt366(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -1262,7 +1265,7 @@ static int __devinit init_dma_hpt366(ide_hwif_t *hwif, return 0; } -static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) +static void hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) { if (dev2->irq != dev->irq) { /* FIXME: we need a core pci_set_interrupt() */ @@ -1272,7 +1275,7 @@ static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) } } -static void __devinit hpt371_init(struct pci_dev *dev) +static void hpt371_init(struct pci_dev *dev) { u8 mcr1 = 0; @@ -1287,7 +1290,7 @@ static void __devinit hpt371_init(struct pci_dev *dev) pci_write_config_byte(dev, 0x50, mcr1 & ~0x04); } -static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) +static int hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) { u8 mcr1 = 0, pin1 = 0, pin2 = 0; @@ -1358,7 +1361,7 @@ static const struct ide_dma_ops hpt36x_dma_ops = { .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info hpt366_chipsets[] __devinitdata = { +static const struct ide_port_info hpt366_chipsets[] = { { /* 0: HPT36x */ .name = DRV_NAME, .init_chipset = init_chipset_hpt366, @@ -1399,7 +1402,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { * Called when the PCI registration layer (or the IDE initialization) * finds a device matching our IDE device tables. */ -static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct hpt_info *info = NULL; struct hpt_info *dyn_info; @@ -1496,7 +1499,7 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic return ret; } -static void __devexit hpt366_remove(struct pci_dev *dev) +static void hpt366_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct ide_info *info = host->host_priv; @@ -1507,7 +1510,7 @@ static void __devexit hpt366_remove(struct pci_dev *dev) kfree(info); } -static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = { +static const struct pci_device_id hpt366_pci_tbl[] = { { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 }, { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 }, { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 }, @@ -1522,7 +1525,7 @@ static struct pci_driver hpt366_pci_driver = { .name = "HPT366_IDE", .id_table = hpt366_pci_tbl, .probe = hpt366_init_one, - .remove = __devexit_p(hpt366_remove), + .remove = hpt366_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c index d81e49680c3..1e0fd3aa962 100644 --- a/drivers/ide/ht6560b.c +++ b/drivers/ide/ht6560b.c @@ -10,7 +10,6 @@ * Author: Mikko Ala-Fossi <maf@iki.fi> * Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl> * - * Try: http://www.maf.iki.fi/~maf/ht6560b/ */ #define DRV_NAME "ht6560b" @@ -318,7 +317,7 @@ static void __init ht6560b_init_dev(ide_drive_t *drive) ide_set_drivedata(drive, (void *)t); } -static int probe_ht6560b; +static bool probe_ht6560b; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); @@ -342,7 +341,7 @@ static const struct ide_port_ops ht6560b_port_ops = { .set_pio_mode = ht6560b_set_pio_mode, }; -static const struct ide_port_info ht6560b_port_info __initdata = { +static const struct ide_port_info ht6560b_port_info __initconst = { .name = DRV_NAME, .chipset = ide_ht6560b, .tp_ops = &ht6560b_tp_ops, diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 4a697a238e2..9f0a48e39b8 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -236,7 +236,7 @@ static const struct ide_port_ops icside_v6_no_dma_port_ops = { */ static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - unsigned long cycle_time; + unsigned long cycle_time = 0; int use_dma_info = 0; const u8 xfer_mode = drive->dma_mode; @@ -271,9 +271,9 @@ static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) ide_set_drivedata(drive, (void *)cycle_time); - printk("%s: %s selected (peak %dMB/s)\n", drive->name, - ide_xfer_verbose(xfer_mode), - 2000 / (unsigned long)ide_get_drivedata(drive)); + printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n", + drive->name, ide_xfer_verbose(xfer_mode), + 2000 / (cycle_time ? cycle_time : (unsigned long) -1)); } static const struct ide_port_ops icside_v6_port_ops = { @@ -375,8 +375,6 @@ static const struct ide_dma_ops icside_v6_dma_ops = { .dma_test_irq = icside_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, }; -#else -#define icside_v6_dma_ops NULL #endif static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) @@ -408,8 +406,8 @@ static const struct ide_port_info icside_v5_port_info = { .chipset = ide_acorn, }; -static int __devinit -icside_register_v5(struct icside_state *state, struct expansion_card *ec) +static int icside_register_v5(struct icside_state *state, + struct expansion_card *ec) { void __iomem *base; struct ide_host *host; @@ -453,18 +451,17 @@ err_free: return ret; } -static const struct ide_port_info icside_v6_port_info __initdata = { +static const struct ide_port_info icside_v6_port_info __initconst = { .init_dma = icside_dma_off_init, .port_ops = &icside_v6_no_dma_port_ops, - .dma_ops = &icside_v6_dma_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2, .swdma_mask = ATA_SWDMA2, .chipset = ide_acorn, }; -static int __devinit -icside_register_v6(struct icside_state *state, struct expansion_card *ec) +static int icside_register_v6(struct icside_state *state, + struct expansion_card *ec) { void __iomem *ioc_base, *easi_base; struct ide_host *host; @@ -518,11 +515,13 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) ecard_set_drvdata(ec, state); +#ifdef CONFIG_BLK_DEV_IDEDMA_ICS if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; - d.dma_ops = NULL; + d.dma_ops = &icside_v6_dma_ops; } +#endif ret = ide_host_register(host, &d, hws); if (ret) @@ -538,8 +537,7 @@ out: return ret; } -static int __devinit -icside_probe(struct expansion_card *ec, const struct ecard_id *id) +static int icside_probe(struct expansion_card *ec, const struct ecard_id *id) { struct icside_state *state; void __iomem *idmem; @@ -605,7 +603,7 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id) return ret; } -static void __devexit icside_remove(struct expansion_card *ec) +static void icside_remove(struct expansion_card *ec) { struct icside_state *state = ecard_get_drvdata(ec); @@ -667,7 +665,7 @@ static const struct ecard_id icside_ids[] = { static struct ecard_driver icside_driver = { .probe = icside_probe, - .remove = __devexit_p(icside_remove), + .remove = icside_remove, .shutdown = icside_shutdown, .id_table = icside_ids, .drv = { diff --git a/drivers/ide/ide-4drives.c b/drivers/ide/ide-4drives.c index 979d342c338..547d7cf2e01 100644 --- a/drivers/ide/ide-4drives.c +++ b/drivers/ide/ide-4drives.c @@ -6,7 +6,7 @@ #define DRV_NAME "ide-4drives" -static int probe_4drives; +static bool probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 5cb01e5c323..b6940992a6f 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -7,17 +7,17 @@ * Copyright (C) 2006 Hannes Reinecke */ +#include <linux/acpi.h> #include <linux/ata.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/kernel.h> -#include <acpi/acpi.h> +#include <linux/slab.h> #include <linux/ide.h> #include <linux/pci.h> #include <linux/dmi.h> - -#include <acpi/acpi_bus.h> +#include <linux/module.h> #define REGS_PER_GTF 7 @@ -51,15 +51,15 @@ struct ide_acpi_hwif_link { #define DEBPRINT(fmt, args...) do {} while (0) #endif /* DEBUGGING */ -static int ide_noacpi; +static bool ide_noacpi; module_param_named(noacpi, ide_noacpi, bool, 0); MODULE_PARM_DESC(noacpi, "disable IDE ACPI support"); -static int ide_acpigtf; +static bool ide_acpigtf; module_param_named(acpigtf, ide_acpigtf, bool, 0); MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support"); -static int ide_acpionboot; +static bool ide_acpionboot; module_param_named(acpionboot, ide_acpionboot, bool, 0); MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot"); @@ -97,6 +97,17 @@ bool ide_port_acpi(ide_hwif_t *hwif) return ide_noacpi == 0 && hwif->acpidata; } +static acpi_handle acpi_get_child(acpi_handle handle, u64 addr) +{ + struct acpi_device *adev; + + if (!handle || acpi_bus_get_device(handle, &adev)) + return NULL; + + adev = acpi_find_child_device(adev, addr, false); + return adev ? adev->handle : NULL; +} + /** * ide_get_dev_handle - finds acpi_handle and PCI device.function * @dev: device to locate @@ -126,7 +137,7 @@ static int ide_get_dev_handle(struct device *dev, acpi_handle *handle, DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func); - dev_handle = DEVICE_ACPI_HANDLE(dev); + dev_handle = ACPI_HANDLE(dev); if (!dev_handle) { DEBPRINT("no acpi handle for device\n"); goto err; @@ -415,21 +426,21 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) out_obj = output.pointer; if (out_obj->type != ACPI_TYPE_BUFFER) { - kfree(output.pointer); DEBPRINT("Run _GTM: error: " "expected object type of ACPI_TYPE_BUFFER, " "got 0x%x\n", out_obj->type); + kfree(output.pointer); return; } if (!out_obj->buffer.length || !out_obj->buffer.pointer || out_obj->buffer.length != sizeof(struct GTM_buffer)) { - kfree(output.pointer); printk(KERN_ERR "%s: unexpected _GTM length (0x%x)[should be 0x%zx] or " "addr (0x%p)\n", __func__, out_obj->buffer.length, sizeof(struct GTM_buffer), out_obj->buffer.pointer); + kfree(output.pointer); return; } @@ -518,11 +529,12 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) ide_port_for_each_present_dev(i, drive, hwif) { if (drive->acpidata->obj_handle) acpi_bus_set_power(drive->acpidata->obj_handle, - on ? ACPI_STATE_D0 : ACPI_STATE_D3); + on ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD); } if (!on) - acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3); + acpi_bus_set_power(hwif->acpidata->obj_handle, + ACPI_STATE_D3_COLD); } /** diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index eb2181a6a11..fac3d9da2e0 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -5,8 +5,10 @@ #include <linux/kernel.h> #include <linux/cdrom.h> #include <linux/delay.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/scatterlist.h> +#include <linux/gfp.h> #include <scsi/scsi.h> @@ -189,7 +191,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) BUG_ON(sense_len > sizeof(*sense)); - if (blk_sense_request(rq) || drive->sense_rq_armed) + if (rq->cmd_type == REQ_TYPE_SENSE || drive->sense_rq_armed) return; memset(sense, 0, sizeof(*sense)); @@ -232,8 +234,7 @@ int ide_queue_sense_rq(ide_drive_t *drive, void *special) drive->hwif->rq = NULL; - elv_add_request(drive->queue, &drive->sense_rq, - ELEVATOR_INSERT_FRONT, 0); + elv_add_request(drive->queue, &drive->sense_rq, ELEVATOR_INSERT_FRONT); return 0; } EXPORT_SYMBOL_GPL(ide_queue_sense_rq); @@ -263,8 +264,8 @@ void ide_retry_pc(ide_drive_t *drive) * of it. The failed command will be retried after sense data * is acquired. */ - blk_requeue_request(failed_rq->q, failed_rq); drive->hwif->rq = NULL; + ide_requeue_and_plug(drive, failed_rq); if (ide_queue_sense_rq(drive, pc)) { blk_start_request(failed_rq); ide_complete_rq(drive, -EIO, blk_rq_bytes(failed_rq)); @@ -306,13 +307,16 @@ EXPORT_SYMBOL_GPL(ide_cd_expiry); int ide_cd_get_xferlen(struct request *rq) { - if (blk_fs_request(rq)) + switch (rq->cmd_type) { + case REQ_TYPE_FS: return 32768; - else if (blk_sense_request(rq) || blk_pc_request(rq) || - rq->cmd_type == REQ_TYPE_ATA_PC) + case REQ_TYPE_SENSE: + case REQ_TYPE_BLOCK_PC: + case REQ_TYPE_ATA_PC: return blk_rq_bytes(rq); - else + default: return 0; + } } EXPORT_SYMBOL_GPL(ide_cd_get_xferlen); @@ -473,12 +477,12 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if (uptodate == 0) drive->failed_pc = NULL; - if (blk_special_request(rq)) { + if (rq->cmd_type == REQ_TYPE_SPECIAL) { rq->errors = 0; error = 0; } else { - if (blk_fs_request(rq) == 0 && uptodate <= 0) { + if (rq->cmd_type != REQ_TYPE_FS && uptodate <= 0) { if (rq->errors == 0) rq->errors = -EIO; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 64207df8da8..0b510bafd90 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -43,7 +43,6 @@ /* For SCSI -> ATAPI command conversion */ #include <scsi/scsi.h> -#include <linux/irq.h> #include <linux/io.h> #include <asm/byteorder.h> #include <linux/uaccess.h> @@ -51,6 +50,7 @@ #include "ide-cd.h" +static DEFINE_MUTEX(ide_cd_mutex); static DEFINE_MUTEX(idecd_ref_mutex); static void ide_cd_release(struct device *); @@ -176,7 +176,7 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, if (!sense->valid) break; if (failed_command == NULL || - !blk_fs_request(failed_command)) + failed_command->cmd_type != REQ_TYPE_FS) break; sector = (sense->information[0] << 24) | (sense->information[1] << 16) | @@ -257,17 +257,10 @@ static int ide_cd_breathe(ide_drive_t *drive, struct request *rq) if (time_after(jiffies, info->write_timeout)) return 0; else { - struct request_queue *q = drive->queue; - unsigned long flags; - /* - * take a breather relying on the unplug timer to kick us again + * take a breather */ - - spin_lock_irqsave(q->queue_lock, flags); - blk_plug_device(q); - spin_unlock_irqrestore(q->queue_lock, flags); - + blk_delay_queue(drive->queue, 1); return 1; } } @@ -292,7 +285,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) "stat 0x%x", rq->cmd[0], rq->cmd_type, err, stat); - if (blk_sense_request(rq)) { + if (rq->cmd_type == REQ_TYPE_SENSE) { /* * We got an error trying to get sense info from the drive * (probably while trying to recover from a former error). @@ -303,7 +296,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) } /* if we have an error, pass CHECK_CONDITION as the SCSI status byte */ - if (blk_pc_request(rq) && !rq->errors) + if (rq->cmd_type == REQ_TYPE_BLOCK_PC && !rq->errors) rq->errors = SAM_STAT_CHECK_CONDITION; if (blk_noretry_request(rq)) @@ -311,13 +304,14 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) switch (sense_key) { case NOT_READY: - if (blk_fs_request(rq) && rq_data_dir(rq) == WRITE) { + if (rq->cmd_type == REQ_TYPE_FS && rq_data_dir(rq) == WRITE) { if (ide_cd_breathe(drive, rq)) return 1; } else { cdrom_saw_media_change(drive); - if (blk_fs_request(rq) && !blk_rq_quiet(rq)) + if (rq->cmd_type == REQ_TYPE_FS && + !(rq->cmd_flags & REQ_QUIET)) printk(KERN_ERR PFX "%s: tray open\n", drive->name); } @@ -326,7 +320,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) case UNIT_ATTENTION: cdrom_saw_media_change(drive); - if (blk_fs_request(rq) == 0) + if (rq->cmd_type != REQ_TYPE_FS) return 0; /* @@ -352,7 +346,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * No point in retrying after an illegal request or data * protect error. */ - if (!blk_rq_quiet(rq)) + if (!(rq->cmd_flags & REQ_QUIET)) ide_dump_status(drive, "command error", stat); do_end_request = 1; break; @@ -361,20 +355,20 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * No point in re-trying a zillion times on a bad sector. * If we got here the error is not correctable. */ - if (!blk_rq_quiet(rq)) + if (!(rq->cmd_flags & REQ_QUIET)) ide_dump_status(drive, "media error " "(bad sector)", stat); do_end_request = 1; break; case BLANK_CHECK: /* disk appears blank? */ - if (!blk_rq_quiet(rq)) + if (!(rq->cmd_flags & REQ_QUIET)) ide_dump_status(drive, "media error (blank)", stat); do_end_request = 1; break; default: - if (blk_fs_request(rq) == 0) + if (rq->cmd_type != REQ_TYPE_FS) break; if (err & ~ATA_ABORTED) { /* go to the default handler for other errors */ @@ -385,7 +379,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) do_end_request = 1; } - if (blk_fs_request(rq) == 0) { + if (rq->cmd_type != REQ_TYPE_FS) { rq->cmd_flags |= REQ_FAILED; do_end_request = 1; } @@ -506,15 +500,22 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, return (flags & REQ_FAILED) ? -EIO : 0; } -static void ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd) +/* + * returns true if rq has been completed + */ +static bool ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd) { unsigned int nr_bytes = cmd->nbytes - cmd->nleft; if (cmd->tf_flags & IDE_TFLAG_WRITE) nr_bytes -= cmd->last_xfer_len; - if (nr_bytes > 0) + if (nr_bytes > 0) { ide_complete_rq(drive, 0, nr_bytes); + return true; + } + + return false; } static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) @@ -525,7 +526,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) ide_expiry_t *expiry = NULL; int dma_error = 0, dma, thislen, uptodate = 0; int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0; - int sense = blk_sense_request(rq); + int sense = (rq->cmd_type == REQ_TYPE_SENSE); unsigned int timeout; u16 len; u8 ireason, stat; @@ -568,7 +569,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) ide_read_bcount_and_ireason(drive, &len, &ireason); - thislen = blk_fs_request(rq) ? len : cmd->nleft; + thislen = (rq->cmd_type == REQ_TYPE_FS) ? len : cmd->nleft; if (thislen > len) thislen = len; @@ -577,7 +578,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) /* If DRQ is clear, the command has completed. */ if ((stat & ATA_DRQ) == 0) { - if (blk_fs_request(rq)) { + if (rq->cmd_type == REQ_TYPE_FS) { /* * If we're not done reading/writing, complain. * Otherwise, complete the command normally. @@ -591,7 +592,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) rq->cmd_flags |= REQ_FAILED; uptodate = 0; } - } else if (!blk_pc_request(rq)) { + } else if (rq->cmd_type != REQ_TYPE_BLOCK_PC) { ide_cd_request_sense_fixup(drive, cmd); uptodate = cmd->nleft ? 0 : 1; @@ -640,7 +641,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) /* pad, if necessary */ if (len > 0) { - if (blk_fs_request(rq) == 0 || write == 0) + if (rq->cmd_type != REQ_TYPE_FS || write == 0) ide_pad_transfer(drive, write, len); else { printk(KERN_ERR PFX "%s: confused, missing data\n", @@ -649,11 +650,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) } } - if (blk_pc_request(rq)) { + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { timeout = rq->timeout; } else { timeout = ATAPI_WAIT_PC; - if (!blk_fs_request(rq)) + if (rq->cmd_type != REQ_TYPE_FS) expiry = ide_cd_expiry; } @@ -662,7 +663,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) return ide_started; out_end: - if (blk_pc_request(rq) && rc == 0) { + if (rq->cmd_type == REQ_TYPE_BLOCK_PC && rc == 0) { rq->resid_len = 0; blk_end_request_all(rq, 0); hwif->rq = NULL; @@ -670,7 +671,7 @@ out_end: if (sense && uptodate) ide_cd_complete_failed_rq(drive, rq); - if (blk_fs_request(rq)) { + if (rq->cmd_type == REQ_TYPE_FS) { if (cmd->nleft == 0) uptodate = 1; } else { @@ -679,10 +680,11 @@ out_end: } if (uptodate == 0 && rq->bio) - ide_cd_error_cmd(drive, cmd); + if (ide_cd_error_cmd(drive, cmd)) + return ide_stopped; /* make sure it's fully ended */ - if (blk_fs_request(rq) == 0) { + if (rq->cmd_type != REQ_TYPE_FS) { rq->resid_len -= cmd->nbytes - cmd->nleft; if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE)) rq->resid_len += cmd->last_xfer_len; @@ -742,7 +744,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) ide_debug_log(IDE_DBG_PC, "rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x", rq->cmd[0], rq->cmd_type); - if (blk_pc_request(rq)) + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) rq->cmd_flags |= REQ_QUIET; else rq->cmd_flags &= ~REQ_FAILED; @@ -775,7 +777,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { struct ide_cmd cmd; - int uptodate = 0, nsectors; + int uptodate = 0; + unsigned int nsectors; ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, block: %llu", rq->cmd[0], (unsigned long long)block); @@ -783,21 +786,26 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, if (drive->debug_mask & IDE_DBG_RQ) blk_dump_rq_flags(rq, "ide_cd_do_request"); - if (blk_fs_request(rq)) { + switch (rq->cmd_type) { + case REQ_TYPE_FS: if (cdrom_start_rw(drive, rq) == ide_stopped) goto out_end; - } else if (blk_sense_request(rq) || blk_pc_request(rq) || - rq->cmd_type == REQ_TYPE_ATA_PC) { + break; + case REQ_TYPE_SENSE: + case REQ_TYPE_BLOCK_PC: + case REQ_TYPE_ATA_PC: if (!rq->timeout) rq->timeout = ATAPI_WAIT_PC; cdrom_do_block_pc(drive, rq); - } else if (blk_special_request(rq)) { + break; + case REQ_TYPE_SPECIAL: /* right now this can only be a reset... */ uptodate = 1; goto out_end; - } else + default: BUG(); + } /* prepare sense request for this command */ ide_prep_sense(drive, rq); @@ -809,7 +817,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, cmd.rq = rq; - if (blk_fs_request(rq) || blk_rq_bytes(rq)) { + if (rq->cmd_type == REQ_TYPE_FS || blk_rq_bytes(rq)) { ide_init_sg_cmd(&cmd, blk_rq_bytes(rq)); ide_map_sg(drive, &cmd); } @@ -1162,7 +1170,7 @@ static struct cdrom_device_ops ide_cdrom_dops = { .open = ide_cdrom_open_real, .release = ide_cdrom_release_real, .drive_status = ide_cdrom_drive_status, - .media_changed = ide_cdrom_check_media_change_real, + .check_events = ide_cdrom_check_events_real, .tray_move = ide_cdrom_tray_move, .lock_door = ide_cdrom_lock_door, .select_speed = ide_cdrom_select_speed, @@ -1365,9 +1373,9 @@ static int ide_cdrom_prep_pc(struct request *rq) static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq) { - if (blk_fs_request(rq)) + if (rq->cmd_type == REQ_TYPE_FS) return ide_cdrom_prep_fs(q, rq); - else if (blk_pc_request(rq)) + else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) return ide_cdrom_prep_pc(rq); return 0; @@ -1400,7 +1408,7 @@ static int idecd_capacity_proc_show(struct seq_file *m, void *v) static int idecd_capacity_proc_open(struct inode *inode, struct file *file) { - return single_open(file, idecd_capacity_proc_show, PDE(inode)->data); + return single_open(file, idecd_capacity_proc_show, PDE_DATA(inode)); } static const struct file_operations idecd_capacity_proc_fops = { @@ -1499,8 +1507,6 @@ static int ide_cdrom_setup(ide_drive_t *drive) blk_queue_dma_alignment(q, 31); blk_queue_update_dma_pad(q, 15); - q->unplug_delay = max((1 * HZ) / 1000, 1); - drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED; drive->atapi_flags = IDE_AFLAG_NO_EJECT | ide_cd_flags(id); @@ -1584,29 +1590,31 @@ static struct ide_driver ide_cdrom_driver = { static int idecd_open(struct block_device *bdev, fmode_t mode) { - struct cdrom_info *info = ide_cd_get(bdev->bd_disk); - int rc = -ENOMEM; + struct cdrom_info *info; + int rc = -ENXIO; + mutex_lock(&ide_cd_mutex); + info = ide_cd_get(bdev->bd_disk); if (!info) - return -ENXIO; + goto out; rc = cdrom_open(&info->devinfo, bdev, mode); - if (rc < 0) ide_cd_put(info); - +out: + mutex_unlock(&ide_cd_mutex); return rc; } -static int idecd_release(struct gendisk *disk, fmode_t mode) +static void idecd_release(struct gendisk *disk, fmode_t mode) { struct cdrom_info *info = ide_drv_g(disk, cdrom_info); + mutex_lock(&ide_cd_mutex); cdrom_release(&info->devinfo, mode); ide_cd_put(info); - - return 0; + mutex_unlock(&ide_cd_mutex); } static int idecd_set_spindown(struct cdrom_device_info *cdi, unsigned long arg) @@ -1648,7 +1656,7 @@ static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg) return 0; } -static int idecd_ioctl(struct block_device *bdev, fmode_t mode, +static int idecd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) { struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info); @@ -1670,10 +1678,24 @@ static int idecd_ioctl(struct block_device *bdev, fmode_t mode, return err; } -static int idecd_media_changed(struct gendisk *disk) +static int idecd_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg) +{ + int ret; + + mutex_lock(&ide_cd_mutex); + ret = idecd_locked_ioctl(bdev, mode, cmd, arg); + mutex_unlock(&ide_cd_mutex); + + return ret; +} + + +static unsigned int idecd_check_events(struct gendisk *disk, + unsigned int clearing) { struct cdrom_info *info = ide_drv_g(disk, cdrom_info); - return cdrom_media_changed(&info->devinfo); + return cdrom_check_events(&info->devinfo, clearing); } static int idecd_revalidate_disk(struct gendisk *disk) @@ -1690,8 +1712,8 @@ static const struct block_device_operations idecd_ops = { .owner = THIS_MODULE, .open = idecd_open, .release = idecd_release, - .locked_ioctl = idecd_ioctl, - .media_changed = idecd_media_changed, + .ioctl = idecd_ioctl, + .check_events = idecd_check_events, .revalidate_disk = idecd_revalidate_disk }; @@ -1734,7 +1756,7 @@ static int ide_cd_probe(ide_drive_t *drive) info->dev.parent = &drive->gendev; info->dev.release = ide_cd_release; - dev_set_name(&info->dev, dev_name(&drive->gendev)); + dev_set_name(&info->dev, "%s", dev_name(&drive->gendev)); if (device_register(&info->dev)) goto out_free_disk; @@ -1757,7 +1779,7 @@ static int ide_cd_probe(ide_drive_t *drive) ide_cd_read_toc(drive, &sense); g->fops = &idecd_ops; - g->flags |= GENHD_FL_REMOVABLE; + g->flags |= GENHD_FL_REMOVABLE | GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE; add_disk(g); return 0; diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 93a3cf1b0f3..1efc936f5b6 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -111,7 +111,8 @@ int cdrom_check_status(ide_drive_t *, struct request_sense *); int ide_cdrom_open_real(struct cdrom_device_info *, int); void ide_cdrom_release_real(struct cdrom_device_info *); int ide_cdrom_drive_status(struct cdrom_device_info *, int); -int ide_cdrom_check_media_change_real(struct cdrom_device_info *, int); +unsigned int ide_cdrom_check_events_real(struct cdrom_device_info *, + unsigned int clearing, int slot_nr); int ide_cdrom_tray_move(struct cdrom_device_info *, int); int ide_cdrom_lock_door(struct cdrom_device_info *, int); int ide_cdrom_select_speed(struct cdrom_device_info *, int); diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c index df3df0041eb..02caa7dd51c 100644 --- a/drivers/ide/ide-cd_ioctl.c +++ b/drivers/ide/ide-cd_ioctl.c @@ -8,6 +8,7 @@ #include <linux/kernel.h> #include <linux/cdrom.h> +#include <linux/gfp.h> #include <linux/ide.h> #include <scsi/scsi.h> @@ -78,8 +79,14 @@ int ide_cdrom_drive_status(struct cdrom_device_info *cdi, int slot_nr) return CDS_DRIVE_NOT_READY; } -int ide_cdrom_check_media_change_real(struct cdrom_device_info *cdi, - int slot_nr) +/* + * ide-cd always generates media changed event if media is missing, which + * makes it impossible to use for proper event reporting, so disk->events + * is cleared to 0 and the following function is used only to trigger + * revalidation and never propagated to userland. + */ +unsigned int ide_cdrom_check_events_real(struct cdrom_device_info *cdi, + unsigned int clearing, int slot_nr) { ide_drive_t *drive = cdi->handle; int retval; @@ -88,9 +95,9 @@ int ide_cdrom_check_media_change_real(struct cdrom_device_info *cdi, (void) cdrom_check_status(drive, NULL); retval = (drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED) ? 1 : 0; drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED; - return retval; + return retval ? DISK_EVENT_MEDIA_CHANGE : 0; } else { - return -EINVAL; + return 0; } } @@ -453,7 +460,7 @@ int ide_cdrom_packet(struct cdrom_device_info *cdi, touch it at all. */ if (cgc->data_direction == CGC_DATA_WRITE) - flags |= REQ_RW; + flags |= REQ_WRITE; if (cgc->sense) memset(cgc->sense, 0, sizeof(struct request_sense)); diff --git a/drivers/ide/ide-cd_verbose.c b/drivers/ide/ide-cd_verbose.c index 6490a2dea96..f079ca2f260 100644 --- a/drivers/ide/ide-cd_verbose.c +++ b/drivers/ide/ide-cd_verbose.c @@ -9,7 +9,9 @@ #include <linux/kernel.h> #include <linux/blkdev.h> #include <linux/cdrom.h> +#include <linux/ide.h> #include <scsi/scsi.h> +#include "ide-cd.h" #ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS void ide_cd_log_error(const char *name, struct request *failed_command, diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index ab87e4f7cec..f1e922e2479 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -41,10 +41,7 @@ #include <linux/major.h> #include <linux/delay.h> #include <asm/io.h> -#include <asm/system.h> -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -65,8 +62,7 @@ MODULE_LICENSE("Dual MPL/GPL"); typedef struct ide_info_t { struct pcmcia_device *p_dev; struct ide_host *host; - int ndev; - dev_node_t node; + int ndev; } ide_info_t; static void ide_release(struct pcmcia_device *); @@ -74,17 +70,6 @@ static int ide_config(struct pcmcia_device *); static void ide_detach(struct pcmcia_device *p_dev); - - - -/*====================================================================== - - ide_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int ide_probe(struct pcmcia_device *link) { ide_info_t *info; @@ -99,25 +84,12 @@ static int ide_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = 3; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; return ide_config(link); } /* ide_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; @@ -191,76 +163,32 @@ out_release: return NULL; } -/*====================================================================== - - ide_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ide device available to the system. - -======================================================================*/ - -struct pcmcia_config_check { - unsigned long ctl_base; - int skip_vcc; - int is_kme; -}; - -static int pcmcia_check_one_config(struct pcmcia_device *pdev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { - struct pcmcia_config_check *stk = priv_data; - - /* Check for matching Vcc, unless we're desperate */ - if (!stk->skip_vcc) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } - } + int *is_kme = priv_data; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->conf.ConfigIndex = cfg->index; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - return -ENODEV; - stk->ctl_base = pdev->io.BasePort2; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - return -ENODEV; - stk->ctl_base = pdev->io.BasePort1 + 0x0e; - } else + if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH) + != IO_DATA_PATH_WIDTH_8) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + } + pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pdev->resource[1]->end) { + pdev->resource[0]->end = 8; + pdev->resource[1]->end = (*is_kme) ? 2 : 1; + } else { + if (pdev->resource[0]->end < 16) return -ENODEV; - /* If we've got this far, we're done */ - return 0; } - return -ENODEV; + + return pcmcia_request_io(pdev); } static int ide_config(struct pcmcia_device *link) { ide_info_t *info = link->priv; - struct pcmcia_config_check *stk = NULL; int ret = 0, is_kme = 0; unsigned long io_base, ctl_base; struct ide_host *host; @@ -271,24 +199,21 @@ static int ide_config(struct pcmcia_device *link) ((link->card_id == PRODID_KME_KXLC005_A) || (link->card_id == PRODID_KME_KXLC005_B))); - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) - goto err_mem; - stk->is_kme = is_kme; - stk->skip_vcc = io_base = ctl_base = 0; - - if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) { - stk->skip_vcc = 1; - if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) + if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) { + link->config_flags &= ~CONF_AUTO_CHECK_VCC; + if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) goto failed; /* No suitable config found */ } - io_base = link->io.BasePort1; - ctl_base = stk->ctl_base; + io_base = link->resource[0]->start; + if (link->resource[1]->end) + ctl_base = link->resource[1]->start; + else + ctl_base = link->resource[0]->start + 0x0e; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -299,46 +224,29 @@ static int ide_config(struct pcmcia_device *link) if (is_kme) outb(0x81, ctl_base+1); - host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); - if (host == NULL && link->io.NumPorts1 == 0x20) { + host = idecs_register(io_base, ctl_base, link->irq, link); + if (host == NULL && resource_size(link->resource[0]) == 0x20) { outb(0x02, ctl_base + 0x10); host = idecs_register(io_base + 0x10, ctl_base + 0x10, - link->irq.AssignedIRQ, link); + link->irq, link); } if (host == NULL) goto failed; info->ndev = 1; - sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2); - info->node.major = host->ports[0]->major; - info->node.minor = 0; info->host = host; - link->dev_node = &info->node; - printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n", - info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10); + dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n", + 'a' + host->ports[0]->index * 2, + link->vpp / 10, link->vpp % 10); - kfree(stk); return 0; -err_mem: - printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n"); - goto failed; - failed: - kfree(stk); ide_release(link); return -ENODEV; } /* ide_config */ -/*====================================================================== - - After a card is removed, ide_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ide_release(struct pcmcia_device *link) { ide_info_t *info = link->priv; @@ -364,16 +272,7 @@ static void ide_release(struct pcmcia_device *link) } /* ide_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the ide drivers from - talking to the ports. - -======================================================================*/ - -static struct pcmcia_device_id ide_ids[] = { +static const struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_FUNC_ID(4), PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ @@ -409,6 +308,8 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), @@ -429,6 +330,8 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), @@ -441,9 +344,7 @@ MODULE_DEVICE_TABLE(pcmcia, ide_ids); static struct pcmcia_driver ide_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ide-cs", - }, + .name = "ide-cs", .probe = ide_probe, .remove = ide_detach, .id_table = ide_ids, diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c index c6935c78757..9e98122f646 100644 --- a/drivers/ide/ide-devsets.c +++ b/drivers/ide/ide-devsets.c @@ -1,5 +1,6 @@ #include <linux/kernel.h> +#include <linux/gfp.h> #include <linux/ide.h> DEFINE_MUTEX(ide_setting_mtx); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 3b128dce9c3..ee880382e3b 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -184,14 +184,13 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, ide_hwif_t *hwif = drive->hwif; BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED); - BUG_ON(!blk_fs_request(rq)); + BUG_ON(rq->cmd_type != REQ_TYPE_FS); ledtrig_ide_activity(); - pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n", + pr_debug("%s: %sing: block=%llu, sectors=%u\n", drive->name, rq_data_dir(rq) == READ ? "read" : "writ", - (unsigned long long)block, blk_rq_sectors(rq), - (unsigned long)rq->buffer); + (unsigned long long)block, blk_rq_sectors(rq)); if (hwif->rw_disk) hwif->rw_disk(drive, rq); @@ -407,43 +406,44 @@ static int ide_disk_get_capacity(ide_drive_t *drive) return 0; } -static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity) +static void ide_disk_unlock_native_capacity(ide_drive_t *drive) { - u64 set = min(capacity, drive->probed_capacity); u16 *id = drive->id; int lba48 = ata_id_lba48_enabled(id); if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 || ata_id_hpa_enabled(id) == 0) - goto out; + return; /* * according to the spec the SET MAX ADDRESS command shall be * immediately preceded by a READ NATIVE MAX ADDRESS command */ - capacity = ide_disk_hpa_get_native_capacity(drive, lba48); - if (capacity == 0) - goto out; - - set = ide_disk_hpa_set_capacity(drive, set, lba48); - if (set) { - /* needed for ->resume to disable HPA */ - drive->dev_flags |= IDE_DFLAG_NOHPA; - return set; - } -out: - return drive->capacity64; + if (!ide_disk_hpa_get_native_capacity(drive, lba48)) + return; + + if (ide_disk_hpa_set_capacity(drive, drive->probed_capacity, lba48)) + drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */ } -static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) +static int idedisk_prep_fn(struct request_queue *q, struct request *rq) { ide_drive_t *drive = q->queuedata; - struct ide_cmd *cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC); + struct ide_cmd *cmd; + + if (!(rq->cmd_flags & REQ_FLUSH)) + return BLKPREP_OK; + + if (rq->special) { + cmd = rq->special; + memset(cmd, 0, sizeof(*cmd)); + } else { + cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC); + } /* FIXME: map struct ide_taskfile on rq->cmd[] */ BUG_ON(cmd == NULL); - memset(cmd, 0, sizeof(*cmd)); if (ata_id_flush_ext_enabled(drive->id) && (drive->capacity64 >= (1UL << 28))) cmd->tf.command = ATA_CMD_FLUSH_EXT; @@ -456,6 +456,8 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) rq->cmd_type = REQ_TYPE_ATA_TASKFILE; rq->special = cmd; cmd->rq = rq; + + return BLKPREP_OK; } ide_devset_get(multcount, mult_count); @@ -517,11 +519,10 @@ static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect) return ide_no_data_taskfile(drive, &cmd); } -static void update_ordered(ide_drive_t *drive) +static void update_flush(ide_drive_t *drive) { u16 *id = drive->id; - unsigned ordered = QUEUE_ORDERED_NONE; - prepare_flush_fn *prep_fn = NULL; + unsigned flush = 0; if (drive->dev_flags & IDE_DFLAG_WCACHE) { unsigned long long capacity; @@ -545,13 +546,12 @@ static void update_ordered(ide_drive_t *drive) drive->name, barrier ? "" : "not "); if (barrier) { - ordered = QUEUE_ORDERED_DRAIN_FLUSH; - prep_fn = idedisk_prepare_flush; + flush = REQ_FLUSH; + blk_queue_prep_rq(drive->queue, idedisk_prep_fn); } - } else - ordered = QUEUE_ORDERED_DRAIN; + } - blk_queue_ordered(drive->queue, ordered, prep_fn); + blk_queue_flush(drive->queue, flush); } ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE); @@ -574,7 +574,7 @@ static int set_wcache(ide_drive_t *drive, int arg) } } - update_ordered(drive); + update_flush(drive); return err; } @@ -783,13 +783,13 @@ static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk, } const struct ide_disk_ops ide_ata_disk_ops = { - .check = ide_disk_check, - .set_capacity = ide_disk_set_capacity, - .get_capacity = ide_disk_get_capacity, - .setup = ide_disk_setup, - .flush = ide_disk_flush, - .init_media = ide_disk_init_media, - .set_doorlock = ide_disk_set_doorlock, - .do_request = ide_do_rw_disk, - .ioctl = ide_disk_ioctl, + .check = ide_disk_check, + .unlock_native_capacity = ide_disk_unlock_native_capacity, + .get_capacity = ide_disk_get_capacity, + .setup = ide_disk_setup, + .flush = ide_disk_flush, + .init_media = ide_disk_init_media, + .set_doorlock = ide_disk_set_doorlock, + .do_request = ide_do_rw_disk, + .ioctl = ide_disk_ioctl, }; diff --git a/drivers/ide/ide-disk_ioctl.c b/drivers/ide/ide-disk_ioctl.c index 7b783dd7c0b..da36f729ff3 100644 --- a/drivers/ide/ide-disk_ioctl.c +++ b/drivers/ide/ide-disk_ioctl.c @@ -1,9 +1,11 @@ #include <linux/kernel.h> #include <linux/ide.h> #include <linux/hdreg.h> +#include <linux/mutex.h> #include "ide-disk.h" +static DEFINE_MUTEX(ide_disk_ioctl_mutex); static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = { { HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, &ide_devset_address }, { HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, &ide_devset_multcount }, @@ -18,9 +20,13 @@ int ide_disk_ioctl(ide_drive_t *drive, struct block_device *bdev, fmode_t mode, { int err; + mutex_lock(&ide_disk_ioctl_mutex); err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings); if (err != -EOPNOTSUPP) - return err; + goto out; - return generic_ide_ioctl(drive, bdev, cmd, arg); + err = generic_ide_ioctl(drive, bdev, cmd, arg); +out: + mutex_unlock(&ide_disk_ioctl_mutex); + return err; } diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c index 60b0590ccc9..0d1fae6cba6 100644 --- a/drivers/ide/ide-disk_proc.c +++ b/drivers/ide/ide-disk_proc.c @@ -1,5 +1,7 @@ #include <linux/kernel.h> #include <linux/ide.h> +#include <linux/slab.h> +#include <linux/export.h> #include <linux/seq_file.h> #include "ide-disk.h" @@ -51,7 +53,7 @@ static int idedisk_cache_proc_show(struct seq_file *m, void *v) static int idedisk_cache_proc_open(struct inode *inode, struct file *file) { - return single_open(file, idedisk_cache_proc_show, PDE(inode)->data); + return single_open(file, idedisk_cache_proc_show, PDE_DATA(inode)); } static const struct file_operations idedisk_cache_proc_fops = { @@ -72,7 +74,7 @@ static int idedisk_capacity_proc_show(struct seq_file *m, void *v) static int idedisk_capacity_proc_open(struct inode *inode, struct file *file) { - return single_open(file, idedisk_capacity_proc_show, PDE(inode)->data); + return single_open(file, idedisk_capacity_proc_show, PDE_DATA(inode)); } static const struct file_operations idedisk_capacity_proc_fops = { @@ -113,7 +115,7 @@ static int idedisk_sv_proc_show(struct seq_file *m, void *v) static int idedisk_sv_proc_open(struct inode *inode, struct file *file) { - return single_open(file, idedisk_sv_proc_show, PDE(inode)->data); + return single_open(file, idedisk_sv_proc_show, PDE_DATA(inode)); } static const struct file_operations idedisk_sv_proc_fops = { @@ -131,7 +133,7 @@ static int idedisk_st_proc_show(struct seq_file *m, void *v) static int idedisk_st_proc_open(struct inode *inode, struct file *file) { - return single_open(file, idedisk_st_proc_show, PDE(inode)->data); + return single_open(file, idedisk_st_proc_show, PDE_DATA(inode)); } static const struct file_operations idedisk_st_proc_fops = { diff --git a/drivers/ide/ide-dma-sff.c b/drivers/ide/ide-dma-sff.c index e4cdf78cc3e..289d16c87b8 100644 --- a/drivers/ide/ide-dma-sff.c +++ b/drivers/ide/ide-dma-sff.c @@ -1,5 +1,6 @@ #include <linux/types.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index ee58c88dee5..17a65ac5649 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -29,7 +29,9 @@ */ #include <linux/types.h> +#include <linux/gfp.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> @@ -448,7 +450,6 @@ ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) ide_hwif_t *hwif = drive->hwif; const struct ide_dma_ops *dma_ops = hwif->dma_ops; struct ide_cmd *cmd = &hwif->cmd; - struct request *rq; ide_startstop_t ret = ide_stopped; /* @@ -486,13 +487,10 @@ ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) ide_dma_off_quietly(drive); /* - * un-busy drive etc and make sure request is sane + * make sure request is sane */ - rq = hwif->rq; - if (rq) { - hwif->rq = NULL; - rq->errors = 0; - } + if (hwif->rq) + hwif->rq->errors = 0; return ret; } diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c index e9abf2c3c33..32970664c27 100644 --- a/drivers/ide/ide-eh.c +++ b/drivers/ide/ide-eh.c @@ -1,5 +1,6 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/delay.h> @@ -122,7 +123,7 @@ ide_startstop_t ide_error(ide_drive_t *drive, const char *msg, u8 stat) return ide_stopped; /* retry only "normal" I/O: */ - if (!blk_fs_request(rq)) { + if (rq->cmd_type != REQ_TYPE_FS) { if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { struct ide_cmd *cmd = rq->special; @@ -146,7 +147,8 @@ static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) { struct request *rq = drive->hwif->rq; - if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) { + if (rq && rq->cmd_type == REQ_TYPE_SPECIAL && + rq->cmd[0] == REQ_DRIVE_RESET) { if (err <= 0 && rq->errors == 0) rq->errors = -EIO; ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq)); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index efd90762346..3d42043fec5 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -25,7 +25,6 @@ #include <linux/major.h> #include <linux/errno.h> #include <linux/genhd.h> -#include <linux/slab.h> #include <linux/cdrom.h> #include <linux/ide.h> #include <linux/hdreg.h> @@ -36,7 +35,6 @@ #include <scsi/scsi_ioctl.h> #include <asm/byteorder.h> -#include <linux/irq.h> #include <linux/uaccess.h> #include <linux/io.h> #include <asm/unaligned.h> @@ -74,7 +72,7 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc) drive->failed_pc = NULL; if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 || - (rq && blk_pc_request(rq))) + rq->cmd_type == REQ_TYPE_BLOCK_PC) uptodate = 1; /* FIXME */ else if (pc->c[0] == GPCMD_REQUEST_SENSE) { @@ -99,7 +97,7 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc) "Aborting request!\n"); } - if (blk_special_request(rq)) + if (rq->cmd_type == REQ_TYPE_SPECIAL) rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL; return uptodate; @@ -108,7 +106,7 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc) static void ide_floppy_report_error(struct ide_disk_obj *floppy, struct ide_atapi_pc *pc) { - /* supress error messages resulting from Medium not present */ + /* suppress error messages resulting from Medium not present */ if (floppy->sense_key == 0x02 && floppy->asc == 0x3a && floppy->ascq == 0x00) @@ -208,7 +206,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive, memcpy(rq->cmd, pc->c, 12); pc->rq = rq; - if (rq->cmd_flags & REQ_RW) + if (rq->cmd_flags & REQ_WRITE) pc->flags |= PC_FLAG_WRITING; pc->flags |= PC_FLAG_DMA_OK; @@ -248,14 +246,16 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, } else printk(KERN_ERR PFX "%s: I/O error\n", drive->name); - if (blk_special_request(rq)) { + if (rq->cmd_type == REQ_TYPE_SPECIAL) { rq->errors = 0; ide_complete_rq(drive, 0, blk_rq_bytes(rq)); return ide_stopped; } else goto out_end; } - if (blk_fs_request(rq)) { + + switch (rq->cmd_type) { + case REQ_TYPE_FS: if (((long)blk_rq_pos(rq) % floppy->bs_factor) || (blk_rq_sectors(rq) % floppy->bs_factor)) { printk(KERN_ERR PFX "%s: unsupported r/w rq size\n", @@ -264,13 +264,18 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, } pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); - } else if (blk_special_request(rq) || blk_sense_request(rq)) { + break; + case REQ_TYPE_SPECIAL: + case REQ_TYPE_SENSE: pc = (struct ide_atapi_pc *)rq->special; - } else if (blk_pc_request(rq)) { + break; + case REQ_TYPE_BLOCK_PC: pc = &floppy->queued_pc; idefloppy_blockpc_cmd(floppy, pc, rq); - } else + break; + default: BUG(); + } ide_prep_sense(drive, rq); @@ -281,7 +286,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, cmd.rq = rq; - if (blk_fs_request(rq) || blk_rq_bytes(rq)) { + if (rq->cmd_type == REQ_TYPE_FS || blk_rq_bytes(rq)) { ide_init_sg_cmd(&cmd, blk_rq_bytes(rq)); ide_map_sg(drive, &cmd); } @@ -291,7 +296,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, return ide_floppy_issue_pc(drive, &cmd, pc); out_end: drive->failed_pc = NULL; - if (blk_fs_request(rq) == 0 && rq->errors == 0) + if (rq->cmd_type != REQ_TYPE_FS && rq->errors == 0) rq->errors = -EIO; ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); return ide_stopped; diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c index 9c2288234de..a22ca846701 100644 --- a/drivers/ide/ide-floppy_ioctl.c +++ b/drivers/ide/ide-floppy_ioctl.c @@ -5,6 +5,7 @@ #include <linux/kernel.h> #include <linux/ide.h> #include <linux/cdrom.h> +#include <linux/mutex.h> #include <asm/unaligned.h> @@ -31,6 +32,7 @@ * On exit we set nformats to the number of records we've actually initialized. */ +static DEFINE_MUTEX(ide_floppy_ioctl_mutex); static int ide_floppy_get_format_capacities(ide_drive_t *drive, struct ide_atapi_pc *pc, int __user *arg) @@ -275,23 +277,27 @@ int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev, void __user *argp = (void __user *)arg; int err; - if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) - return ide_floppy_lockdoor(drive, &pc, arg, cmd); + mutex_lock(&ide_floppy_ioctl_mutex); + if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) { + err = ide_floppy_lockdoor(drive, &pc, arg, cmd); + goto out; + } err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp); if (err != -ENOTTY) - return err; + goto out; /* * skip SCSI_IOCTL_SEND_COMMAND (deprecated) * and CDROM_SEND_PACKET (legacy) ioctls */ if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND) - err = scsi_cmd_ioctl(bdev->bd_disk->queue, bdev->bd_disk, - mode, cmd, argp); + err = scsi_cmd_blk_ioctl(bdev, mode, cmd, argp); if (err == -ENOTTY) err = generic_ide_ioctl(drive, bdev, cmd, arg); +out: + mutex_unlock(&ide_floppy_ioctl_mutex); return err; } diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c index d711d9b883d..e7a25ea757d 100644 --- a/drivers/ide/ide-floppy_proc.c +++ b/drivers/ide/ide-floppy_proc.c @@ -1,4 +1,5 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/seq_file.h> @@ -14,7 +15,7 @@ static int idefloppy_capacity_proc_show(struct seq_file *m, void *v) static int idefloppy_capacity_proc_open(struct inode *inode, struct file *file) { - return single_open(file, idefloppy_capacity_proc_show, PDE(inode)->data); + return single_open(file, idefloppy_capacity_proc_show, PDE_DATA(inode)); } static const struct file_operations idefloppy_capacity_proc_fops = { diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 753241429c2..838996a0039 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -8,6 +8,7 @@ #include <linux/ide.h> #include <linux/hdreg.h> #include <linux/dmi.h> +#include <linux/slab.h> #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) #define IDE_DISK_MINORS (1 << PARTN_BITS) @@ -21,6 +22,7 @@ #define IDE_GD_VERSION "1.18" /* module parameters */ +static DEFINE_MUTEX(ide_gd_mutex); static unsigned long debug_mask; module_param(debug_mask, ulong, 0644); @@ -91,7 +93,7 @@ static void ide_disk_release(struct device *dev) /* * On HPA drives the capacity needs to be - * reinitilized on resume otherwise the disk + * reinitialized on resume otherwise the disk * can not be used and a hard reset is required */ static void ide_gd_resume(ide_drive_t *drive) @@ -236,13 +238,26 @@ out_put_idkp: return ret; } -static int ide_gd_release(struct gendisk *disk, fmode_t mode) +static int ide_gd_unlocked_open(struct block_device *bdev, fmode_t mode) +{ + int ret; + + mutex_lock(&ide_gd_mutex); + ret = ide_gd_open(bdev, mode); + mutex_unlock(&ide_gd_mutex); + + return ret; +} + + +static void ide_gd_release(struct gendisk *disk, fmode_t mode) { struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); ide_drive_t *drive = idkp->drive; ide_debug_log(IDE_DBG_FUNC, "enter"); + mutex_lock(&ide_gd_mutex); if (idkp->openers == 1) drive->disk_ops->flush(drive); @@ -254,8 +269,7 @@ static int ide_gd_release(struct gendisk *disk, fmode_t mode) idkp->openers--; ide_disk_put(idkp); - - return 0; + mutex_unlock(&ide_gd_mutex); } static int ide_gd_getgeo(struct block_device *bdev, struct hd_geometry *geo) @@ -269,11 +283,12 @@ static int ide_gd_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } -static int ide_gd_media_changed(struct gendisk *disk) +static unsigned int ide_gd_check_events(struct gendisk *disk, + unsigned int clearing) { struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); ide_drive_t *drive = idkp->drive; - int ret; + bool ret; /* do not scan partitions twice if this is a removable device */ if (drive->dev_flags & IDE_DFLAG_ATTACH) { @@ -281,23 +296,26 @@ static int ide_gd_media_changed(struct gendisk *disk) return 0; } - ret = !!(drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED); + /* + * The following is used to force revalidation on the first open on + * removeable devices, and never gets reported to userland as + * genhd->events is 0. This is intended as removeable ide disk + * can't really detect MEDIA_CHANGE events. + */ + ret = drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED; drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED; - return ret; + return ret ? DISK_EVENT_MEDIA_CHANGE : 0; } -static unsigned long long ide_gd_set_capacity(struct gendisk *disk, - unsigned long long capacity) +static void ide_gd_unlock_native_capacity(struct gendisk *disk) { struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); ide_drive_t *drive = idkp->drive; const struct ide_disk_ops *disk_ops = drive->disk_ops; - if (disk_ops->set_capacity) - return disk_ops->set_capacity(drive, capacity); - - return drive->capacity64; + if (disk_ops->unlock_native_capacity) + disk_ops->unlock_native_capacity(drive); } static int ide_gd_revalidate_disk(struct gendisk *disk) @@ -305,7 +323,7 @@ static int ide_gd_revalidate_disk(struct gendisk *disk) struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); ide_drive_t *drive = idkp->drive; - if (ide_gd_media_changed(disk)) + if (ide_gd_check_events(disk, 0)) drive->disk_ops->get_capacity(drive); set_capacity(disk, ide_gd_capacity(drive)); @@ -323,12 +341,12 @@ static int ide_gd_ioctl(struct block_device *bdev, fmode_t mode, static const struct block_device_operations ide_gd_ops = { .owner = THIS_MODULE, - .open = ide_gd_open, + .open = ide_gd_unlocked_open, .release = ide_gd_release, - .locked_ioctl = ide_gd_ioctl, + .ioctl = ide_gd_ioctl, .getgeo = ide_gd_getgeo, - .media_changed = ide_gd_media_changed, - .set_capacity = ide_gd_set_capacity, + .check_events = ide_gd_check_events, + .unlock_native_capacity = ide_gd_unlock_native_capacity, .revalidate_disk = ide_gd_revalidate_disk }; @@ -374,7 +392,7 @@ static int ide_gd_probe(ide_drive_t *drive) idkp->dev.parent = &drive->gendev; idkp->dev.release = ide_disk_release; - dev_set_name(&idkp->dev, dev_name(&drive->gendev)); + dev_set_name(&idkp->dev, "%s", dev_name(&drive->gendev)); if (device_register(&idkp->dev)) goto out_free_disk; diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c deleted file mode 100644 index 520f42c5445..00000000000 --- a/drivers/ide/ide-h8300.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * H8/300 generic IDE interface - */ - -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#define DRV_NAME "ide-h8300" - -#define bswap(d) \ -({ \ - u16 r; \ - __asm__("mov.b %w1,r1h\n\t" \ - "mov.b %x1,r1l\n\t" \ - "mov.w r1,%0" \ - :"=r"(r) \ - :"r"(d) \ - :"er1"); \ - (r); \ -}) - -static void mm_outsw(unsigned long addr, void *buf, u32 len) -{ - unsigned short *bp = (unsigned short *)buf; - for (; len > 0; len--, bp++) - *(volatile u16 *)addr = bswap(*bp); -} - -static void mm_insw(unsigned long addr, void *buf, u32 len) -{ - unsigned short *bp = (unsigned short *)buf; - for (; len > 0; len--, bp++) - *bp = bswap(*(volatile u16 *)addr); -} - -static void h8300_input_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - mm_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); -} - -static void h8300_output_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - mm_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); -} - -static const struct ide_tp_ops h8300_tp_ops = { - .exec_command = ide_exec_command, - .read_status = ide_read_status, - .read_altstatus = ide_read_altstatus, - .write_devctl = ide_write_devctl, - - .dev_select = ide_dev_select, - .tf_load = ide_tf_load, - .tf_read = ide_tf_read, - - .input_data = h8300_input_data, - .output_data = h8300_output_data, -}; - -#define H8300_IDE_GAP (2) - -static inline void hw_setup(struct ide_hw *hw) -{ - int i; - - memset(hw, 0, sizeof(*hw)); - for (i = 0; i <= 7; i++) - hw->io_ports_array[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i; - hw->io_ports.ctl_addr = CONFIG_H8300_IDE_ALT; - hw->irq = EXT_IRQ0 + CONFIG_H8300_IDE_IRQ; -} - -static const struct ide_port_info h8300_port_info = { - .tp_ops = &h8300_tp_ops, - .host_flags = IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA, - .chipset = ide_generic, -}; - -static int __init h8300_ide_init(void) -{ - struct ide_hw hw, *hws[] = { &hw }; - - printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n"); - - if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300")) - goto out_busy; - if (!request_region(CONFIG_H8300_IDE_ALT, H8300_IDE_GAP, "ide-h8300")) { - release_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8); - goto out_busy; - } - - hw_setup(&hw); - - return ide_host_add(&h8300_port_info, hws, 1, NULL); - -out_busy: - printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n"); - - return -EBUSY; -} - -module_init(h8300_ide_init); - -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 46721c45451..19763977568 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -1,5 +1,6 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \ diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index db96138fefc..177db6d5b2f 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -135,7 +135,7 @@ EXPORT_SYMBOL(ide_complete_rq); void ide_kill_rq(ide_drive_t *drive, struct request *rq) { - u8 drv_req = blk_special_request(rq) && rq->rq_disk; + u8 drv_req = (rq->cmd_type == REQ_TYPE_SPECIAL) && rq->rq_disk; u8 media = drive->media; drive->failed_pc = NULL; @@ -145,7 +145,7 @@ void ide_kill_rq(ide_drive_t *drive, struct request *rq) } else { if (media == ide_tape) rq->errors = IDE_DRV_ERROR_GENERAL; - else if (blk_fs_request(rq) == 0 && rq->errors == 0) + else if (rq->cmd_type != REQ_TYPE_FS && rq->errors == 0) rq->errors = -EIO; } @@ -307,7 +307,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) { ide_startstop_t startstop; - BUG_ON(!blk_rq_started(rq)); + BUG_ON(!(rq->cmd_flags & REQ_STARTED)); #ifdef DEBUG printk("%s: start_request: current=0x%08lx\n", @@ -353,7 +353,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) pm->pm_step == IDE_PM_COMPLETED) ide_complete_pm_rq(drive, rq); return startstop; - } else if (!rq->rq_disk && blk_special_request(rq)) + } else if (!rq->rq_disk && rq->cmd_type == REQ_TYPE_SPECIAL) /* * TODO: Once all ULDs have been modified to * check for specific op codes rather than @@ -430,6 +430,26 @@ static inline void ide_unlock_host(struct ide_host *host) } } +static void __ide_requeue_and_plug(struct request_queue *q, struct request *rq) +{ + if (rq) + blk_requeue_request(q, rq); + if (rq || blk_peek_request(q)) { + /* Use 3ms as that was the old plug delay */ + blk_delay_queue(q, 3); + } +} + +void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq) +{ + struct request_queue *q = drive->queue; + unsigned long flags; + + spin_lock_irqsave(q->queue_lock, flags); + __ide_requeue_and_plug(q, rq); + spin_unlock_irqrestore(q->queue_lock, flags); +} + /* * Issue a new request to a device. */ @@ -440,19 +460,7 @@ void do_ide_request(struct request_queue *q) struct ide_host *host = hwif->host; struct request *rq = NULL; ide_startstop_t startstop; - - /* - * drive is doing pre-flush, ordered write, post-flush sequence. even - * though that is 3 requests, it must be seen as a single transaction. - * we must not preempt this drive until that is complete - */ - if (blk_queue_flushing(q)) - /* - * small race where queue could get replugged during - * the 3-request flush cycle, just yank the plug since - * we want it to finish asap - */ - blk_remove_plug(q); + unsigned long queue_run_ms = 3; /* old plug delay */ spin_unlock_irq(q->queue_lock); @@ -472,6 +480,9 @@ repeat: prev_port = hwif->host->cur_port; if (drive->dev_flags & IDE_DFLAG_SLEEPING && time_after(drive->sleep, jiffies)) { + unsigned long left = jiffies - drive->sleep; + + queue_run_ms = jiffies_to_msecs(left + 1); ide_unlock_port(hwif); goto plug_device; } @@ -559,26 +570,7 @@ plug_device: ide_unlock_host(host); plug_device_2: spin_lock_irq(q->queue_lock); - - if (rq) - blk_requeue_request(q, rq); - if (!elv_queue_empty(q)) - blk_plug_device(q); -} - -static void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq) -{ - struct request_queue *q = drive->queue; - unsigned long flags; - - spin_lock_irqsave(q->queue_lock, flags); - - if (rq) - blk_requeue_request(q, rq); - if (!elv_queue_empty(q)) - blk_plug_device(q); - - spin_unlock_irqrestore(q->queue_lock, flags); + __ide_requeue_and_plug(q, rq); } static int drive_is_ready(ide_drive_t *drive) diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index 6e7ae2b6cfc..6233fa2cb8a 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -2,8 +2,10 @@ * IDE ioctls handling. */ +#include <linux/export.h> #include <linux/hdreg.h> #include <linux/ide.h> +#include <linux/slab.h> static const struct ide_ioctl_devset ide_ioctl_settings[] = { { HDIO_GET_32BIT, HDIO_SET_32BIT, &ide_devset_io_32bit }, @@ -139,8 +141,8 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg) if (args[0] == ATA_CMD_SMART) { tf->nsect = args[3]; tf->lbal = args[1]; - tf->lbam = 0x4f; - tf->lbah = 0xc2; + tf->lbam = ATA_SMART_LBAM_PASS; + tf->lbah = ATA_SMART_LBAH_PASS; cmd.valid.out.tf = IDE_VALID_OUT_TF; cmd.valid.in.tf = IDE_VALID_NSECT; } else { diff --git a/drivers/ide/ide-legacy.c b/drivers/ide/ide-legacy.c index b9654a7bb7b..30fe3630734 100644 --- a/drivers/ide/ide-legacy.c +++ b/drivers/ide/ide-legacy.c @@ -1,4 +1,5 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> static void ide_legacy_init_one(struct ide_hw **hws, struct ide_hw *hw, diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index e386a32dc9b..d9c9829c8b2 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -1,6 +1,7 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/ide.h> #include <linux/bitops.h> diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index a914023d6d0..f41558a0bcd 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -1,4 +1,5 @@ #include <linux/kernel.h> +#include <linux/gfp.h> #include <linux/ide.h> #include <linux/jiffies.h> #include <linux/blkdev.h> @@ -51,7 +52,7 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) rq->cmd[0] = REQ_UNPARK_HEADS; rq->cmd_len = 1; rq->cmd_type = REQ_TYPE_SPECIAL; - elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 1); + elv_add_request(q, rq, ELEVATOR_INSERT_FRONT); out: return; @@ -115,8 +116,10 @@ ssize_t ide_park_store(struct device *dev, struct device_attribute *attr, long int input; int rc; - rc = strict_strtol(buf, 10, &input); - if (rc || input < -2) + rc = kstrtol(buf, 10, &input); + if (rc) + return rc; + if (input < -2) return -EINVAL; if (input > MAX_PARK_TIMEOUT) { input = MAX_PARK_TIMEOUT; diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index a743e68a890..673420db953 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -28,7 +28,7 @@ #define DRV_NAME "ide_pci_generic" -static int ide_generic_all; /* Set to claim all devices */ +static bool ide_generic_all; /* Set to claim all devices */ module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); @@ -53,7 +53,7 @@ static const struct ide_port_ops netcell_port_ops = { .udma_mask = ATA_UDMA6, \ } -static const struct ide_port_info generic_chipsets[] __devinitdata = { +static const struct ide_port_info generic_chipsets[] = { /* 0: Unknown */ DECLARE_GENERIC_PCI_DEV(0), @@ -103,7 +103,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &generic_chipsets[id->driver_data]; int ret = -ENODEV; diff --git a/drivers/ide/ide-pio-blacklist.c b/drivers/ide/ide-pio-blacklist.c index a8c2c8f8660..40e683a84ff 100644 --- a/drivers/ide/ide-pio-blacklist.c +++ b/drivers/ide/ide-pio-blacklist.c @@ -7,6 +7,7 @@ */ #include <linux/string.h> +#include <linux/ide.h> static struct ide_pio_info { const char *name; diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index ad7be2669dc..8d1e32d7cd9 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -1,9 +1,10 @@ #include <linux/kernel.h> +#include <linux/gfp.h> #include <linux/ide.h> int generic_ide_suspend(struct device *dev, pm_message_t mesg) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; @@ -39,7 +40,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) int generic_ide_resume(struct device *dev) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; @@ -190,10 +191,10 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) #ifdef DEBUG_PM printk("%s: completing PM request, %s\n", drive->name, - blk_pm_suspend_request(rq) ? "suspend" : "resume"); + (rq->cmd_type == REQ_TYPE_PM_SUSPEND) ? "suspend" : "resume"); #endif spin_lock_irqsave(q->queue_lock, flags); - if (blk_pm_suspend_request(rq)) + if (rq->cmd_type == REQ_TYPE_PM_SUSPEND) blk_stop_queue(q); else drive->dev_flags &= ~IDE_DFLAG_BLOCKED; @@ -209,11 +210,11 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { struct request_pm_state *pm = rq->special; - if (blk_pm_suspend_request(rq) && + if (rq->cmd_type == REQ_TYPE_PM_SUSPEND && pm->pm_step == IDE_PM_START_SUSPEND) /* Mark drive blocked when starting the suspend sequence. */ drive->dev_flags |= IDE_DFLAG_BLOCKED; - else if (blk_pm_resume_request(rq) && + else if (rq->cmd_type == REQ_TYPE_PM_RESUME && pm->pm_step == IDE_PM_START_RESUME) { /* * The first thing we do on wakeup is to wait for BSY bit to diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 017b1df3b80..e5f3db83137 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/pnp.h> #include <linux/ide.h> +#include <linux/module.h> #define DRV_NAME "ide-pnp" diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index fbedd35feb4..a3d3b1733c4 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -545,7 +545,7 @@ static int ide_register_port(ide_hwif_t *hwif) int ret; /* register with global device tree */ - dev_set_name(&hwif->gendev, hwif->name); + dev_set_name(&hwif->gendev, "%s", hwif->name); dev_set_drvdata(&hwif->gendev, hwif); if (hwif->gendev.parent == NULL) hwif->gendev.parent = hwif->dev; @@ -559,7 +559,7 @@ static int ide_register_port(ide_hwif_t *hwif) } hwif->portdev = device_create(ide_port_class, &hwif->gendev, - MKDEV(0, 0), hwif, hwif->name); + MKDEV(0, 0), hwif, "%s", hwif->name); if (IS_ERR(hwif->portdev)) { ret = PTR_ERR(hwif->portdev); device_unregister(&hwif->gendev); @@ -695,14 +695,8 @@ static int ide_probe_port(ide_hwif_t *hwif) if (irqd) disable_irq(hwif->irq); - rc = ide_port_wait_ready(hwif); - if (rc == -ENODEV) { - printk(KERN_INFO "%s: no devices on the port\n", hwif->name); - goto out; - } else if (rc == -EBUSY) - printk(KERN_ERR "%s: not ready before the probe\n", hwif->name); - else - rc = -ENODEV; + if (ide_port_wait_ready(hwif) == -EBUSY) + printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name); /* * Second drive should only exist if first drive was found, @@ -713,7 +707,7 @@ static int ide_probe_port(ide_hwif_t *hwif) if (drive->dev_flags & IDE_DFLAG_PRESENT) rc = 0; } -out: + /* * Use cached IRQ number. It might be (and is...) changed by probe * code above @@ -859,8 +853,9 @@ static int init_irq (ide_hwif_t *hwif) if (irq_handler == NULL) irq_handler = ide_intr; - if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) - goto out_up; + if (!host->get_lock) + if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) + goto out_up; #if !defined(__mc68000__) printk(KERN_INFO "%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name, @@ -1454,19 +1449,13 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, if (hwif == NULL) continue; - if (hwif->present) - hwif_register_devices(hwif); - } - - ide_host_for_each_port(i, hwif, host) { - if (hwif == NULL) - continue; - ide_sysfs_register_port(hwif); ide_proc_register_port(hwif); - if (hwif->present) + if (hwif->present) { ide_proc_port_register_devices(hwif); + hwif_register_devices(hwif); + } } return j ? 0 : -1; @@ -1545,7 +1534,8 @@ static void ide_unregister(ide_hwif_t *hwif) ide_proc_unregister_port(hwif); - free_irq(hwif->irq, hwif); + if (!hwif->host->get_lock) + free_irq(hwif->irq, hwif); device_unregister(hwif->portdev); device_unregister(&hwif->gendev); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 017c09540c2..97c07007777 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -25,6 +25,7 @@ #include <linux/ctype.h> #include <linux/ide.h> #include <linux/seq_file.h> +#include <linux/slab.h> #include <asm/io.h> @@ -57,7 +58,7 @@ static int ide_imodel_proc_show(struct seq_file *m, void *v) static int ide_imodel_proc_open(struct inode *inode, struct file *file) { - return single_open(file, ide_imodel_proc_show, PDE(inode)->data); + return single_open(file, ide_imodel_proc_show, PDE_DATA(inode)); } static const struct file_operations ide_imodel_proc_fops = { @@ -81,7 +82,7 @@ static int ide_mate_proc_show(struct seq_file *m, void *v) static int ide_mate_proc_open(struct inode *inode, struct file *file) { - return single_open(file, ide_mate_proc_show, PDE(inode)->data); + return single_open(file, ide_mate_proc_show, PDE_DATA(inode)); } static const struct file_operations ide_mate_proc_fops = { @@ -102,7 +103,7 @@ static int ide_channel_proc_show(struct seq_file *m, void *v) static int ide_channel_proc_open(struct inode *inode, struct file *file) { - return single_open(file, ide_channel_proc_show, PDE(inode)->data); + return single_open(file, ide_channel_proc_show, PDE_DATA(inode)); } static const struct file_operations ide_channel_proc_fops = { @@ -142,7 +143,7 @@ static int ide_identify_proc_show(struct seq_file *m, void *v) static int ide_identify_proc_open(struct inode *inode, struct file *file) { - return single_open(file, ide_identify_proc_show, PDE(inode)->data); + return single_open(file, ide_identify_proc_show, PDE_DATA(inode)); } static const struct file_operations ide_identify_proc_fops = { @@ -324,7 +325,7 @@ static int ide_settings_proc_show(struct seq_file *m, void *v) static int ide_settings_proc_open(struct inode *inode, struct file *file) { - return single_open(file, ide_settings_proc_show, PDE(inode)->data); + return single_open(file, ide_settings_proc_show, PDE_DATA(inode)); } #define MAX_LEN 30 @@ -332,7 +333,7 @@ static int ide_settings_proc_open(struct inode *inode, struct file *file) static ssize_t ide_settings_proc_write(struct file *file, const char __user *buffer, size_t count, loff_t *pos) { - ide_drive_t *drive = (ide_drive_t *) PDE(file->f_path.dentry->d_inode)->data; + ide_drive_t *drive = PDE_DATA(file_inode(file)); char name[MAX_LEN + 1]; int for_real = 0, mul_factor, div_factor; unsigned long n; @@ -473,7 +474,7 @@ static int ide_geometry_proc_show(struct seq_file *m, void *v) static int ide_geometry_proc_open(struct inode *inode, struct file *file) { - return single_open(file, ide_geometry_proc_show, PDE(inode)->data); + return single_open(file, ide_geometry_proc_show, PDE_DATA(inode)); } const struct file_operations ide_geometry_proc_fops = { @@ -496,7 +497,7 @@ static int ide_dmodel_proc_show(struct seq_file *seq, void *v) static int ide_dmodel_proc_open(struct inode *inode, struct file *file) { - return single_open(file, ide_dmodel_proc_show, PDE(inode)->data); + return single_open(file, ide_dmodel_proc_show, PDE_DATA(inode)); } static const struct file_operations ide_dmodel_proc_fops = { @@ -524,7 +525,7 @@ static int ide_driver_proc_show(struct seq_file *m, void *v) static int ide_driver_proc_open(struct inode *inode, struct file *file) { - return single_open(file, ide_driver_proc_show, PDE(inode)->data); + return single_open(file, ide_driver_proc_show, PDE_DATA(inode)); } static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) @@ -557,7 +558,7 @@ static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) static ssize_t ide_driver_proc_write(struct file *file, const char __user *buffer, size_t count, loff_t *pos) { - ide_drive_t *drive = (ide_drive_t *) PDE(file->f_path.dentry->d_inode)->data; + ide_drive_t *drive = PDE_DATA(file_inode(file)); char name[32]; if (!capable(CAP_SYS_ADMIN)) @@ -600,7 +601,7 @@ static int ide_media_proc_show(struct seq_file *m, void *v) static int ide_media_proc_open(struct inode *inode, struct file *file) { - return single_open(file, ide_media_proc_show, PDE(inode)->data); + return single_open(file, ide_media_proc_show, PDE_DATA(inode)); } static const struct file_operations ide_media_proc_fops = { diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c index 0e79efff1de..c3da53e7bb2 100644 --- a/drivers/ide/ide-scan-pci.c +++ b/drivers/ide/ide-scan-pci.c @@ -88,7 +88,7 @@ static int __init ide_scan_pcibus(void) struct list_head *l, *n; pre_init = 0; - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev))) + for_each_pci_dev(dev) ide_scan_pcidev(dev); /* diff --git a/drivers/ide/ide-sysfs.c b/drivers/ide/ide-sysfs.c index 883ffacaf45..84a6a9e08d6 100644 --- a/drivers/ide/ide-sysfs.c +++ b/drivers/ide/ide-sysfs.c @@ -25,6 +25,7 @@ static ssize_t media_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", ide_media_string(drive)); } +static DEVICE_ATTR_RO(media); static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -32,6 +33,7 @@ static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", drive->name); } +static DEVICE_ATTR_RO(drivename); static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -39,6 +41,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "ide:m-%s\n", ide_media_string(drive)); } +static DEVICE_ATTR_RO(modalias); static ssize_t model_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -46,6 +49,7 @@ static ssize_t model_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]); } +static DEVICE_ATTR_RO(model); static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -53,6 +57,7 @@ static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]); } +static DEVICE_ATTR_RO(firmware); static ssize_t serial_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -60,16 +65,28 @@ static ssize_t serial_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]); } +static DEVICE_ATTR(serial, 0400, serial_show, NULL); + +static DEVICE_ATTR(unload_heads, 0644, ide_park_show, ide_park_store); + +static struct attribute *ide_attrs[] = { + &dev_attr_media.attr, + &dev_attr_drivename.attr, + &dev_attr_modalias.attr, + &dev_attr_model.attr, + &dev_attr_firmware.attr, + &dev_attr_serial.attr, + &dev_attr_unload_heads.attr, + NULL, +}; + +static const struct attribute_group ide_attr_group = { + .attrs = ide_attrs, +}; -struct device_attribute ide_dev_attrs[] = { - __ATTR_RO(media), - __ATTR_RO(drivename), - __ATTR_RO(modalias), - __ATTR_RO(model), - __ATTR_RO(firmware), - __ATTR(serial, 0400, serial_show, NULL), - __ATTR(unload_heads, 0644, ide_park_show, ide_park_store), - __ATTR_NULL +const struct attribute_group *ide_dev_groups[] = { + &ide_attr_group, + NULL, }; static ssize_t store_delete_devices(struct device *portdev, diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b07232880ec..1793aea4a7d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -35,14 +35,12 @@ #include <linux/slab.h> #include <linux/pci.h> #include <linux/ide.h> -#include <linux/smp_lock.h> #include <linux/completion.h> #include <linux/bitops.h> #include <linux/mutex.h> #include <scsi/scsi.h> #include <asm/byteorder.h> -#include <linux/irq.h> #include <linux/uaccess.h> #include <linux/io.h> #include <asm/unaligned.h> @@ -219,6 +217,7 @@ typedef struct ide_tape_obj { char write_prot; } idetape_tape_t; +static DEFINE_MUTEX(ide_tape_mutex); static DEFINE_MUTEX(idetape_ref_mutex); static DEFINE_MUTEX(idetape_chrdev_mutex); @@ -577,7 +576,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, rq->cmd[0], (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq)); - BUG_ON(!(blk_special_request(rq) || blk_sense_request(rq))); + BUG_ON(!(rq->cmd_type == REQ_TYPE_SPECIAL || + rq->cmd_type == REQ_TYPE_SENSE)); /* Retry a failed packet command */ if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) { @@ -1424,9 +1424,9 @@ static long idetape_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { long ret; - lock_kernel(); + mutex_lock(&ide_tape_mutex); ret = do_idetape_chrdev_ioctl(file, cmd, arg); - unlock_kernel(); + mutex_unlock(&ide_tape_mutex); return ret; } @@ -1847,7 +1847,7 @@ static int idetape_name_proc_show(struct seq_file *m, void *v) static int idetape_name_proc_open(struct inode *inode, struct file *file) { - return single_open(file, idetape_name_proc_show, PDE(inode)->data); + return single_open(file, idetape_name_proc_show, PDE_DATA(inode)); } static const struct file_operations idetape_name_proc_fops = { @@ -1901,11 +1901,16 @@ static const struct file_operations idetape_fops = { .unlocked_ioctl = idetape_chrdev_ioctl, .open = idetape_chrdev_open, .release = idetape_chrdev_release, + .llseek = noop_llseek, }; static int idetape_open(struct block_device *bdev, fmode_t mode) { - struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk, false, 0); + struct ide_tape_obj *tape; + + mutex_lock(&ide_tape_mutex); + tape = ide_tape_get(bdev->bd_disk, false, 0); + mutex_unlock(&ide_tape_mutex); if (!tape) return -ENXIO; @@ -1913,12 +1918,13 @@ static int idetape_open(struct block_device *bdev, fmode_t mode) return 0; } -static int idetape_release(struct gendisk *disk, fmode_t mode) +static void idetape_release(struct gendisk *disk, fmode_t mode) { struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj); + mutex_lock(&ide_tape_mutex); ide_tape_put(tape); - return 0; + mutex_unlock(&ide_tape_mutex); } static int idetape_ioctl(struct block_device *bdev, fmode_t mode, @@ -1926,9 +1932,14 @@ static int idetape_ioctl(struct block_device *bdev, fmode_t mode, { struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj); ide_drive_t *drive = tape->drive; - int err = generic_ide_ioctl(drive, bdev, cmd, arg); + int err; + + mutex_lock(&ide_tape_mutex); + err = generic_ide_ioctl(drive, bdev, cmd, arg); if (err == -EINVAL) err = idetape_blkdev_ioctl(drive, cmd, arg); + mutex_unlock(&ide_tape_mutex); + return err; } @@ -1936,7 +1947,7 @@ static const struct block_device_operations idetape_block_ops = { .owner = THIS_MODULE, .open = idetape_open, .release = idetape_release, - .locked_ioctl = idetape_ioctl, + .ioctl = idetape_ioctl, }; static int ide_tape_probe(ide_drive_t *drive) @@ -1974,7 +1985,7 @@ static int ide_tape_probe(ide_drive_t *drive) tape->dev.parent = &drive->gendev; tape->dev.release = ide_tape_release; - dev_set_name(&tape->dev, dev_name(&drive->gendev)); + dev_set_name(&tape->dev, "%s", dev_name(&drive->gendev)); if (device_register(&tape->dev)) goto out_free_disk; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index cc8633cbe13..dabb88b1cbe 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -11,6 +11,7 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/errno.h> @@ -201,7 +202,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) u8 stat; /* - * Last sector was transfered, wait until device is ready. This can + * Last sector was transferred, wait until device is ready. This can * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ for (retries = 0; retries < 1000; retries++) { @@ -238,9 +239,6 @@ void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, unsigned nr_bytes = min(len, cursg->length - cmd->cursg_ofs); int page_is_high; - if (nr_bytes > PAGE_SIZE) - nr_bytes = PAGE_SIZE; - page = sg_page(cursg); offset = cursg->offset + cmd->cursg_ofs; @@ -248,11 +246,13 @@ void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; + nr_bytes = min_t(unsigned, nr_bytes, (PAGE_SIZE - offset)); + page_is_high = PageHighMem(page); if (page_is_high) local_irq_save(flags); - buf = kmap_atomic(page, KM_BIO_SRC_IRQ) + offset; + buf = kmap_atomic(page) + offset; cmd->nleft -= nr_bytes; cmd->cursg_ofs += nr_bytes; @@ -268,7 +268,7 @@ void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, else hwif->tp_ops->input_data(drive, cmd, buf, nr_bytes); - kunmap_atomic(buf, KM_BIO_SRC_IRQ); + kunmap_atomic(buf); if (page_is_high) local_irq_restore(flags); @@ -428,13 +428,11 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, { struct request *rq; int error; + int rw = !(cmd->tf_flags & IDE_TFLAG_WRITE) ? READ : WRITE; - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq = blk_get_request(drive->queue, rw, __GFP_WAIT); rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - if (cmd->tf_flags & IDE_TFLAG_WRITE) - rq->cmd_flags |= REQ_RW; - /* * (ks) We transfer currently only whole sectors. * This is suffient for now. But, it would be great, @@ -482,13 +480,9 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) u16 nsect = 0; char __user *buf = (char __user *)arg; - req_task = kzalloc(tasksize, GFP_KERNEL); - if (req_task == NULL) - return -ENOMEM; - if (copy_from_user(req_task, buf, tasksize)) { - kfree(req_task); - return -EFAULT; - } + req_task = memdup_user(buf, tasksize); + if (IS_ERR(req_task)) + return PTR_ERR(req_task); taskout = req_task->out_size; taskin = req_task->in_size; diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c index 5fc8d5c17de..eb421883c16 100644 --- a/drivers/ide/ide-xfer-mode.c +++ b/drivers/ide/ide-xfer-mode.c @@ -1,6 +1,7 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/ide.h> #include <linux/bitops.h> diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 16d056939f9..2ce6268a273 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -52,7 +52,6 @@ #include <linux/major.h> #include <linux/errno.h> #include <linux/genhd.h> -#include <linux/slab.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/ide.h> @@ -159,7 +158,7 @@ struct bus_type ide_bus_type = { .probe = generic_ide_probe, .remove = generic_ide_remove, .shutdown = generic_ide_shutdown, - .dev_attrs = ide_dev_attrs, + .dev_groups = ide_dev_groups, .suspend = generic_ide_suspend, .resume = generic_ide_resume, }; @@ -178,7 +177,7 @@ EXPORT_SYMBOL_GPL(ide_pci_clk); module_param_named(pci_clock, ide_pci_clk, int, 0); MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)"); -static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) +static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp) { int a, b, i, j = 1; unsigned int *dev_param_mask = (unsigned int *)kp->arg; @@ -201,34 +200,40 @@ static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) return 0; } +static struct kernel_param_ops param_ops_ide_dev_mask = { + .set = ide_set_dev_param_mask +}; + +#define param_check_ide_dev_mask(name, p) param_check_uint(name, p) + static unsigned int ide_nodma; -module_param_call(nodma, ide_set_dev_param_mask, NULL, &ide_nodma, 0); +module_param_named(nodma, ide_nodma, ide_dev_mask, 0); MODULE_PARM_DESC(nodma, "disallow DMA for a device"); static unsigned int ide_noflush; -module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0); +module_param_named(noflush, ide_noflush, ide_dev_mask, 0); MODULE_PARM_DESC(noflush, "disable flush requests for a device"); static unsigned int ide_nohpa; -module_param_call(nohpa, ide_set_dev_param_mask, NULL, &ide_nohpa, 0); +module_param_named(nohpa, ide_nohpa, ide_dev_mask, 0); MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device"); static unsigned int ide_noprobe; -module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0); +module_param_named(noprobe, ide_noprobe, ide_dev_mask, 0); MODULE_PARM_DESC(noprobe, "skip probing for a device"); static unsigned int ide_nowerr; -module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0); +module_param_named(nowerr, ide_nowerr, ide_dev_mask, 0); MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device"); static unsigned int ide_cdroms; -module_param_call(cdrom, ide_set_dev_param_mask, NULL, &ide_cdroms, 0); +module_param_named(cdrom, ide_cdroms, ide_dev_mask, 0); MODULE_PARM_DESC(cdrom, "force device as a CD-ROM"); struct chs_geom { diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c index 42965b3e30b..a8b4b6af80e 100644 --- a/drivers/ide/ide_platform.c +++ b/drivers/ide/ide_platform.c @@ -19,13 +19,12 @@ #include <linux/module.h> #include <linux/ata_platform.h> #include <linux/platform_device.h> +#include <linux/interrupt.h> #include <linux/io.h> -static void __devinit plat_ide_setup_ports(struct ide_hw *hw, - void __iomem *base, - void __iomem *ctrl, - struct pata_platform_info *pdata, - int irq) +static void plat_ide_setup_ports(struct ide_hw *hw, void __iomem *base, + void __iomem *ctrl, + struct pata_platform_info *pdata, int irq) { unsigned long port = (unsigned long)base; int i; @@ -47,7 +46,7 @@ static const struct ide_port_info platform_ide_port_info = { .chipset = ide_generic, }; -static int __devinit plat_ide_probe(struct platform_device *pdev) +static int plat_ide_probe(struct platform_device *pdev) { struct resource *res_base, *res_alt, *res_irq; void __iomem *base, *alt_base; @@ -57,7 +56,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) struct ide_hw hw, *hws[] = { &hw }; struct ide_port_info d = platform_ide_port_info; - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); /* get a pointer to the register memory */ res_base = platform_get_resource(pdev, IORESOURCE_IO, 0); @@ -95,6 +94,10 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start); hw.dev = &pdev->dev; + d.irq_flags = res_irq->flags & IRQF_TRIGGER_MASK; + if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE) + d.irq_flags |= IRQF_SHARED; + if (mmio) d.host_flags |= IDE_HFLAG_MMIO; @@ -110,7 +113,7 @@ out: return ret; } -static int __devexit plat_ide_remove(struct platform_device *pdev) +static int plat_ide_remove(struct platform_device *pdev) { struct ide_host *host = dev_get_drvdata(&pdev->dev); @@ -125,7 +128,7 @@ static struct platform_driver platform_ide_driver = { .owner = THIS_MODULE, }, .probe = plat_ide_probe, - .remove = __devexit_p(plat_ide_remove), + .remove = plat_ide_remove, }; static int __init platform_ide_init(void) diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c index 560e66d0765..b6f674ab4fb 100644 --- a/drivers/ide/it8172.c +++ b/drivers/ide/it8172.c @@ -115,7 +115,7 @@ static const struct ide_port_ops it8172_port_ops = { .set_dma_mode = it8172_set_dma_mode, }; -static const struct ide_port_info it8172_port_info __devinitdata = { +static const struct ide_port_info it8172_port_info = { .name = DRV_NAME, .port_ops = &it8172_port_ops, .enablebits = { {0x41, 0x80, 0x80}, {0x00, 0x00, 0x00} }, @@ -125,8 +125,7 @@ static const struct ide_port_info it8172_port_info __devinitdata = { .udma_mask = ATA_UDMA2, }; -static int __devinit it8172_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id) { if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) return -ENODEV; /* IT8172 is more than an IDE controller */ diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c index 46816ba2641..6b92846682f 100644 --- a/drivers/ide/it8213.c +++ b/drivers/ide/it8213.c @@ -156,7 +156,7 @@ static const struct ide_port_ops it8213_port_ops = { .cable_detect = it8213_cable_detect, }; -static const struct ide_port_info it8213_chipset __devinitdata = { +static const struct ide_port_info it8213_chipset = { .name = DRV_NAME, .enablebits = { {0x41, 0x80, 0x80} }, .port_ops = &it8213_port_ops, @@ -177,7 +177,7 @@ static const struct ide_port_info it8213_chipset __devinitdata = { * standard helper functions to do almost all the work for us. */ -static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &it8213_chipset, NULL); } diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index b2709c73348..f01ba4606be 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -61,6 +61,7 @@ #include <linux/types.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> @@ -527,7 +528,7 @@ static struct ide_dma_ops it821x_pass_through_dma_ops = { * ide DMA handlers appropriately */ -static void __devinit init_hwif_it821x(ide_hwif_t *hwif) +static void init_hwif_it821x(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); @@ -629,7 +630,7 @@ static const struct ide_port_ops it821x_port_ops = { .cable_detect = it821x_cable_detect, }; -static const struct ide_port_info it821x_chipset __devinitdata = { +static const struct ide_port_info it821x_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_it821x, .init_hwif = init_hwif_it821x, @@ -646,7 +647,7 @@ static const struct ide_port_info it821x_chipset __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct it821x_dev *itdevs; int rc; @@ -666,7 +667,7 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic return rc; } -static void __devexit it821x_remove(struct pci_dev *dev) +static void it821x_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct it821x_dev *itdevs = host->host_priv; @@ -688,7 +689,7 @@ static struct pci_driver it821x_pci_driver = { .name = "ITE821x IDE", .id_table = it821x_pci_tbl, .probe = it821x_init_one, - .remove = __devexit_p(it821x_remove), + .remove = it821x_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c index 74c2c4a6d90..ae6480dcbad 100644 --- a/drivers/ide/jmicron.c +++ b/drivers/ide/jmicron.c @@ -102,7 +102,7 @@ static const struct ide_port_ops jmicron_port_ops = { .cable_detect = jmicron_cable_detect, }; -static const struct ide_port_info jmicron_chipset __devinitdata = { +static const struct ide_port_info jmicron_chipset = { .name = DRV_NAME, .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } }, .port_ops = &jmicron_port_ops, @@ -120,7 +120,7 @@ static const struct ide_port_info jmicron_chipset __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &jmicron_chipset, NULL); } diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c index 505ec43e560..adc5fe9daaf 100644 --- a/drivers/ide/macide.c +++ b/drivers/ide/macide.c @@ -17,6 +17,7 @@ #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/ide.h> +#include <linux/module.h> #include <asm/macintosh.h> #include <asm/macints.h> diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index 95327a2c242..392fd106edf 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -96,7 +96,7 @@ static const struct ide_tp_ops superio_tp_ops = { .output_data = ide_output_data, }; -static void __devinit superio_init_iops(struct hwif_s *hwif) +static void superio_init_iops(struct hwif_s *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); u32 dma_stat; @@ -201,7 +201,7 @@ static int ns87415_dma_end(ide_drive_t *drive) return (dma_stat & 7) != 4; } -static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) +static void init_hwif_ns87415 (ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned int ctrl, using_inta; @@ -293,7 +293,7 @@ static const struct ide_dma_ops ns87415_dma_ops = { .dma_sff_read_status = superio_dma_sff_read_status, }; -static const struct ide_port_info ns87415_chipset __devinitdata = { +static const struct ide_port_info ns87415_chipset = { .name = DRV_NAME, .init_hwif = init_hwif_ns87415, .tp_ops = &ns87415_tp_ops, @@ -302,7 +302,7 @@ static const struct ide_port_info ns87415_chipset __devinitdata = { IDE_HFLAG_NO_ATAPI_DMA, }; -static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d = ns87415_chipset; diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c index 1a53a4c375e..26a45007e53 100644 --- a/drivers/ide/opti621.c +++ b/drivers/ide/opti621.c @@ -131,7 +131,7 @@ static const struct ide_port_ops opti621_port_ops = { .set_pio_mode = opti621_set_pio_mode, }; -static const struct ide_port_info opti621_chipset __devinitdata = { +static const struct ide_port_info opti621_chipset = { .name = DRV_NAME, .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, .port_ops = &opti621_port_ops, @@ -139,7 +139,7 @@ static const struct ide_port_info opti621_chipset __devinitdata = { .pio_mask = ATA_PIO4, }; -static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &opti621_chipset, NULL); } diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index 9e8f4e1b0cc..ba20d18c037 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -191,7 +191,7 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int is_slave = drive->dn & 1; - void __iomem *base = (void *)hwif->dma_base; + void __iomem *base = (void __iomem *)hwif->dma_base; const u8 xferspeed = drive->dma_mode; if (xferspeed >= XFER_UDMA_0) { @@ -209,7 +209,7 @@ static void palm_bk3710_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) unsigned int cycle_time; int is_slave = drive->dn & 1; ide_drive_t *mate; - void __iomem *base = (void *)hwif->dma_base; + void __iomem *base = (void __iomem *)hwif->dma_base; const u8 pio = drive->pio_mode - XFER_PIO_0; /* @@ -220,7 +220,7 @@ static void palm_bk3710_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio); } -static void __devinit palm_bk3710_chipinit(void __iomem *base) +static void palm_bk3710_chipinit(void __iomem *base) { /* * REVISIT: the ATA reset signal needs to be managed through a @@ -282,8 +282,7 @@ static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA80; } -static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int palm_bk3710_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); @@ -301,7 +300,7 @@ static const struct ide_port_ops palm_bk3710_ports_ops = { .cable_detect = palm_bk3710_cable_detect, }; -static struct ide_port_info __devinitdata palm_bk3710_port_info = { +static struct ide_port_info palm_bk3710_port_info = { .init_dma = palm_bk3710_init_dma, .port_ops = &palm_bk3710_ports_ops, .dma_ops = &sff_dma_ops, @@ -342,7 +341,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) return -ENODEV; } - mem_size = mem->end - mem->start + 1; + mem_size = resource_size(mem); if (request_mem_region(mem->start, mem_size, "palm_bk3710") == NULL) { printk(KERN_ERR "failed to request memory region\n"); return -EBUSY; diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c index 9546fe2a93f..df73cbd9387 100644 --- a/drivers/ide/pdc202xx_new.c +++ b/drivers/ide/pdc202xx_new.c @@ -422,7 +422,7 @@ static int init_chipset_pdcnew(struct pci_dev *dev) return 0; } -static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) +static struct pci_dev *pdc20270_get_dev2(struct pci_dev *dev) { struct pci_dev *dev2; @@ -465,7 +465,7 @@ static const struct ide_port_ops pdcnew_port_ops = { .udma_mask = udma, \ } -static const struct ide_port_info pdcnew_chipsets[] __devinitdata = { +static const struct ide_port_info pdcnew_chipsets[] = { /* 0: PDC202{68,70} */ DECLARE_PDCNEW_DEV(ATA_UDMA5), /* 1: PDC202{69,71,75,76,77} */ DECLARE_PDCNEW_DEV(ATA_UDMA6), }; @@ -479,7 +479,7 @@ static const struct ide_port_info pdcnew_chipsets[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data]; struct pci_dev *bridge = dev->bus->self; @@ -514,7 +514,7 @@ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_de return ide_pci_init_one(dev, d, NULL); } -static void __devexit pdc202new_remove(struct pci_dev *dev) +static void pdc202new_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; @@ -539,7 +539,7 @@ static struct pci_driver pdc202new_pci_driver = { .name = "Promise_IDE", .id_table = pdc202new_pci_tbl, .probe = pdc202new_init_one, - .remove = __devexit_p(pdc202new_remove), + .remove = pdc202new_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index c5f3841af36..224ad46d6cb 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -93,13 +93,13 @@ static int pdc202xx_test_irq(ide_hwif_t *hwif) * bit 7: error, bit 6: interrupting, * bit 5: FIFO full, bit 4: FIFO empty */ - return ((sc1d & 0x50) == 0x50) ? 1 : 0; + return (sc1d & 0x40) ? 1 : 0; } else { /* * bit 3: error, bit 2: interrupting, * bit 1: FIFO full, bit 0: FIFO empty */ - return ((sc1d & 0x05) == 0x05) ? 1 : 0; + return (sc1d & 0x04) ? 1 : 0; } } @@ -211,8 +211,7 @@ out: return 0; } -static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, - const char *name) +static void pdc202ata4_fixup_irq(struct pci_dev *dev, const char *name) { if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) { u8 irq = 0, irq2 = 0; @@ -241,6 +240,7 @@ static const struct ide_port_ops pdc20246_port_ops = { static const struct ide_port_ops pdc2026x_port_ops = { .set_pio_mode = pdc202xx_set_pio_mode, .set_dma_mode = pdc202xx_set_mode, + .test_irq = pdc202xx_test_irq, .cable_detect = pdc2026x_cable_detect, }; @@ -269,7 +269,7 @@ static const struct ide_dma_ops pdc2026x_dma_ops = { .max_sectors = sectors, \ } -static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = { +static const struct ide_port_info pdc202xx_chipsets[] = { { /* 0: PDC20246 */ .name = DRV_NAME, .init_chipset = init_chipset_pdc202xx, @@ -296,7 +296,8 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int pdc202xx_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { const struct ide_port_info *d; u8 idx = id->driver_data; diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index 1bdca49e5a0..a671cead6ae 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -8,8 +8,8 @@ * * Documentation: * - * Publically available from Intel web site. Errata documentation - * is also publically available. As an aide to anyone hacking on this + * Publicly available from Intel web site. Errata documentation + * is also publicly available. As an aide to anyone hacking on this * driver the list of errata that are relevant is below.going back to * PIIX4. Older device documentation is now a bit tricky to find. * @@ -297,7 +297,7 @@ static u8 piix_cable_detect(ide_hwif_t *hwif) * capabilities of the hardware. */ -static void __devinit init_hwif_piix(ide_hwif_t *hwif) +static void init_hwif_piix(ide_hwif_t *hwif) { if (!hwif->dma_base) return; @@ -331,7 +331,7 @@ static const struct ide_port_ops ich_port_ops = { .udma_mask = udma, \ } -#define DECLARE_ICH_DEV(udma) \ +#define DECLARE_ICH_DEV(mwdma, udma) \ { \ .name = DRV_NAME, \ .init_chipset = init_chipset_ich, \ @@ -340,11 +340,11 @@ static const struct ide_port_ops ich_port_ops = { .port_ops = &ich_port_ops, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ - .mwdma_mask = ATA_MWDMA12_ONLY, \ + .mwdma_mask = mwdma, \ .udma_mask = udma, \ } -static const struct ide_port_info piix_pci_info[] __devinitdata = { +static const struct ide_port_info piix_pci_info[] = { /* 0: MPIIX */ { /* * MPIIX actually has only a single IDE channel mapped to @@ -362,13 +362,15 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = { /* 2: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA2), /* 3: ICH0 */ - DECLARE_ICH_DEV(ATA_UDMA2), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2), /* 4: ICH */ - DECLARE_ICH_DEV(ATA_UDMA4), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4), /* 5: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA4), - /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ - DECLARE_ICH_DEV(ATA_UDMA5), + /* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5), + /* 7: ICH7/7-R, no MWDMA1 */ + DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5), }; /** @@ -380,7 +382,7 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int piix_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &piix_pci_info[id->driver_data], NULL); } @@ -392,7 +394,7 @@ static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_ * they are found, disable use of DMA IDE */ -static void __devinit piix_check_450nx(void) +static void piix_check_450nx(void) { struct pci_dev *pdev = NULL; u16 cfg; @@ -438,9 +440,9 @@ static const struct pci_device_id piix_pci_tbl[] = { #endif { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 }, { 0, }, }; diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 850ee452e9b..2db803cd095 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -28,11 +28,13 @@ #include <linux/delay.h> #include <linux/ide.h> #include <linux/notifier.h> +#include <linux/module.h> #include <linux/reboot.h> #include <linux/pci.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/scatterlist.h> +#include <linux/slab.h> #include <asm/prom.h> #include <asm/io.h> @@ -414,8 +416,7 @@ static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *); static void pmac_ide_apply_timings(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (drive->dn & 1) writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG)); @@ -432,8 +433,7 @@ static void pmac_ide_apply_timings(ide_drive_t *drive) static void pmac_ide_kauai_apply_timings(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (drive->dn & 1) { writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); @@ -452,8 +452,7 @@ static void pmac_ide_do_update_timings(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (pmif->kind == controller_sh_ata6 || pmif->kind == controller_un_ata6 || @@ -498,8 +497,7 @@ static void pmac_write_devctl(ide_hwif_t *hwif, u8 ctl) */ static void pmac_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); const u8 pio = drive->pio_mode - XFER_PIO_0; struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); u32 *timings, t; @@ -779,8 +777,7 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); int ret = 0; u32 *timings, *timings2, tl[2]; u8 unit = drive->dn & 1; @@ -917,8 +914,7 @@ static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); struct device_node *np = pmif->node; const char *cable = of_get_property(np, "cable-type", NULL); struct device_node *root = of_find_node_by_path("/"); @@ -949,8 +945,7 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) static void pmac_ide_init_dev(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (on_media_bay(pmif)) { if (check_media_bay(pmif->mdev->media_bay) == MB_CD) { @@ -1023,8 +1018,7 @@ static const struct ide_port_info pmac_port_info = { * Setup, register & probe an IDE channel driven by this driver, this is * called by one of the 2 probe functions (macio or PCI). */ -static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, - struct ide_hw *hw) +static int pmac_ide_setup_device(pmac_ide_hwif_t *pmif, struct ide_hw *hw) { struct device_node *np = pmif->node; const int *bidp; @@ -1124,7 +1118,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, return rc; } -static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base) +static void pmac_ide_init_ports(struct ide_hw *hw, unsigned long base) { int i; @@ -1137,8 +1131,8 @@ static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base) /* * Attach to a macio probed interface */ -static int __devinit -pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) +static int pmac_ide_macio_attach(struct macio_dev *mdev, + const struct of_device_id *match) { void __iomem *base; unsigned long regbase; @@ -1152,7 +1146,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) if (macio_resource_count(mdev) == 0) { printk(KERN_WARNING "ide-pmac: no address for %s\n", - mdev->ofdev.node->full_name); + mdev->ofdev.dev.of_node->full_name); rc = -ENXIO; goto out_free_pmif; } @@ -1160,7 +1154,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) /* Request memory resource for IO ports */ if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) { printk(KERN_ERR "ide-pmac: can't request MMIO resource for " - "%s!\n", mdev->ofdev.node->full_name); + "%s!\n", mdev->ofdev.dev.of_node->full_name); rc = -EBUSY; goto out_free_pmif; } @@ -1172,7 +1166,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) */ if (macio_irq_count(mdev) == 0) { printk(KERN_WARNING "ide-pmac: no intrs for device %s, using " - "13\n", mdev->ofdev.node->full_name); + "13\n", mdev->ofdev.dev.of_node->full_name); irq = irq_create_mapping(NULL, 13); } else irq = macio_irq(mdev, 0); @@ -1181,7 +1175,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) regbase = (unsigned long) base; pmif->mdev = mdev; - pmif->node = mdev->ofdev.node; + pmif->node = mdev->ofdev.dev.of_node; pmif->regbase = regbase; pmif->irq = irq; pmif->kauai_fcr = NULL; @@ -1190,7 +1184,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) printk(KERN_WARNING "ide-pmac: can't request DMA " "resource for %s!\n", - mdev->ofdev.node->full_name); + mdev->ofdev.dev.of_node->full_name); else pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); } else @@ -1227,8 +1221,7 @@ out_free_pmif: static int pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev); int rc = 0; if (mesg.event != mdev->ofdev.dev.power.power_state.event @@ -1244,8 +1237,7 @@ pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) static int pmac_ide_macio_resume(struct macio_dev *mdev) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev); int rc = 0; if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) { @@ -1260,8 +1252,8 @@ pmac_ide_macio_resume(struct macio_dev *mdev) /* * Attach to a PCI probed interface */ -static int __devinit -pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) +static int pmac_ide_pci_attach(struct pci_dev *pdev, + const struct pci_device_id *id) { struct device_node *np; pmac_ide_hwif_t *pmif; @@ -1317,7 +1309,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) rc = pmac_ide_setup_device(pmif, &hw); if (rc != 0) { /* The inteface is released to the common IDE layer */ - pci_set_drvdata(pdev, NULL); iounmap(base); pci_release_regions(pdev); kfree(pmif); @@ -1333,7 +1324,7 @@ out_free_pmif: static int pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + pmac_ide_hwif_t *pmif = pci_get_drvdata(pdev); int rc = 0; if (mesg.event != pdev->dev.power.power_state.event @@ -1349,7 +1340,7 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) static int pmac_ide_pci_resume(struct pci_dev *pdev) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + pmac_ide_hwif_t *pmif = pci_get_drvdata(pdev); int rc = 0; if (pdev->dev.power.power_state.event != PM_EVENT_ON) { @@ -1364,8 +1355,7 @@ pmac_ide_pci_resume(struct pci_dev *pdev) #ifdef CONFIG_PMAC_MEDIABAY static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev); switch(mb_state) { case MB_CD: @@ -1399,8 +1389,11 @@ static struct of_device_id pmac_ide_macio_match[] = static struct macio_driver pmac_ide_macio_driver = { - .name = "ide-pmac", - .match_table = pmac_ide_macio_match, + .driver = { + .name = "ide-pmac", + .owner = THIS_MODULE, + .of_match_table = pmac_ide_macio_match, + }, .probe = pmac_ide_macio_attach, .suspend = pmac_ide_macio_suspend, .resume = pmac_ide_macio_resume, @@ -1464,8 +1457,7 @@ out: static int pmac_ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); struct dbdma_cmd *table; volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; struct scatterlist *sg; @@ -1542,8 +1534,7 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) static int pmac_ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4); u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE); @@ -1568,8 +1559,7 @@ static void pmac_ide_dma_start(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma; dma = pmif->dma_regs; @@ -1586,8 +1576,7 @@ static int pmac_ide_dma_end (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; u32 dstat; @@ -1611,8 +1600,7 @@ static int pmac_ide_dma_test_irq (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; unsigned long status, timeout; @@ -1666,8 +1654,7 @@ static void pmac_ide_dma_lost_irq (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; unsigned long status = readl(&dma->status); @@ -1687,11 +1674,9 @@ static const struct ide_dma_ops pmac_dma_ops = { * Allocate the data structures needed for using DMA with an interface * and fill the proper list of functions pointers */ -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int pmac_ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); struct pci_dev *dev = to_pci_dev(hwif->dev); /* We won't need pci_dev if we switch to generic consistent diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c index 90786083b43..ecd0a69245f 100644 --- a/drivers/ide/q40ide.c +++ b/drivers/ide/q40ide.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <linux/blkdev.h> #include <linux/ide.h> +#include <linux/module.h> #include <asm/ide.h> diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 3f0244fd8e6..a6fb6a894c7 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c @@ -29,7 +29,6 @@ #include <linux/blkdev.h> #include <linux/ide.h> #include <linux/init.h> -#include <asm/system.h> #include <asm/io.h> #define DRV_NAME "qd65xx" @@ -336,7 +335,7 @@ static const struct ide_port_ops qd6580_port_ops = { .set_pio_mode = qd6580_set_pio_mode, }; -static const struct ide_port_info qd65xx_port_info __initdata = { +static const struct ide_port_info qd65xx_port_info __initconst = { .name = DRV_NAME, .tp_ops = &qd65xx_tp_ops, .chipset = ide_qd65xx, @@ -417,7 +416,7 @@ static int __init qd_probe(int base) return rc; } -static int probe_qd65xx; +static bool probe_qd65xx; module_param_named(probe, probe_qd65xx, bool, 0); MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); diff --git a/drivers/ide/rapide.c b/drivers/ide/rapide.c index 00f54248f41..d73c3d10087 100644 --- a/drivers/ide/rapide.c +++ b/drivers/ide/rapide.c @@ -3,7 +3,6 @@ */ #include <linux/module.h> -#include <linux/slab.h> #include <linux/blkdev.h> #include <linux/errno.h> #include <linux/ide.h> @@ -30,8 +29,7 @@ static void rapide_setup_ports(struct ide_hw *hw, void __iomem *base, hw->irq = irq; } -static int __devinit -rapide_probe(struct expansion_card *ec, const struct ecard_id *id) +static int rapide_probe(struct expansion_card *ec, const struct ecard_id *id) { void __iomem *base; struct ide_host *host; @@ -65,7 +63,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) return ret; } -static void __devexit rapide_remove(struct expansion_card *ec) +static void rapide_remove(struct expansion_card *ec) { struct ide_host *host = ecard_get_drvdata(ec); @@ -83,7 +81,7 @@ static struct ecard_id rapide_ids[] = { static struct ecard_driver rapide_driver = { .probe = rapide_probe, - .remove = __devexit_p(rapide_remove), + .remove = rapide_remove, .id_table = rapide_ids, .drv = { .name = "rapide", diff --git a/drivers/ide/rz1000.c b/drivers/ide/rz1000.c index a6414a884eb..f4b66f7ec9f 100644 --- a/drivers/ide/rz1000.c +++ b/drivers/ide/rz1000.c @@ -22,7 +22,7 @@ #define DRV_NAME "rz1000" -static int __devinit rz1000_disable_readahead(struct pci_dev *dev) +static int rz1000_disable_readahead(struct pci_dev *dev) { u16 reg; @@ -38,12 +38,12 @@ static int __devinit rz1000_disable_readahead(struct pci_dev *dev) } } -static const struct ide_port_info rz1000_chipset __devinitdata = { +static const struct ide_port_info rz1000_chipset = { .name = DRV_NAME, .host_flags = IDE_HFLAG_NO_DMA, }; -static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d = rz1000_chipset; int rc; diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c index 134f1fd1386..a5b70181840 100644 --- a/drivers/ide/sc1200.c +++ b/drivers/ide/sc1200.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> @@ -290,7 +291,7 @@ static const struct ide_dma_ops sc1200_dma_ops = { .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info sc1200_chipset __devinitdata = { +static const struct ide_port_info sc1200_chipset = { .name = DRV_NAME, .port_ops = &sc1200_port_ops, .dma_ops = &sc1200_dma_ops, @@ -302,7 +303,7 @@ static const struct ide_port_info sc1200_chipset __devinitdata = { .udma_mask = ATA_UDMA2, }; -static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct sc1200_saved_state *ss = NULL; int rc; diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index b7f5b0c4310..2a2d188b5d5 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -585,8 +585,7 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, * Perform the initial set up for this device. */ -static int __devinit init_setup_scc(struct pci_dev *dev, - const struct ide_port_info *d) +static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d) { unsigned long ctl_base; unsigned long dma_base; @@ -718,7 +717,7 @@ static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd, * */ -static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) +static void init_mmio_iops_scc(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct scc_ports *ports = pci_get_drvdata(dev); @@ -738,7 +737,7 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) * and then do the MMIO setup. */ -static void __devinit init_iops_scc(ide_hwif_t *hwif) +static void init_iops_scc(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -748,8 +747,7 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif) init_mmio_iops_scc(hwif); } -static int __devinit scc_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { return ide_allocate_dma_engine(hwif); } @@ -768,7 +766,7 @@ static u8 scc_cable_detect(ide_hwif_t *hwif) * ide DMA handlers appropriately. */ -static void __devinit init_hwif_scc(ide_hwif_t *hwif) +static void init_hwif_scc(ide_hwif_t *hwif) { /* PTERADD */ out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); @@ -811,7 +809,7 @@ static const struct ide_dma_ops scc_dma_ops = { .dma_sff_read_status = scc_dma_sff_read_status, }; -static const struct ide_port_info scc_chipset __devinitdata = { +static const struct ide_port_info scc_chipset = { .name = "sccIDE", .init_iops = init_iops_scc, .init_dma = scc_init_dma, @@ -834,7 +832,7 @@ static const struct ide_port_info scc_chipset __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return init_setup_scc(dev, &scc_chipset); } @@ -846,7 +844,7 @@ static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_i * Called by the PCI code when it removes an SCC PATA controller. */ -static void __devexit scc_remove(struct pci_dev *dev) +static void scc_remove(struct pci_dev *dev) { struct scc_ports *ports = pci_get_drvdata(dev); struct ide_host *host = ports->host; @@ -869,7 +867,7 @@ static struct pci_driver scc_pci_driver = { .name = "SCC IDE", .id_table = scc_pci_tbl, .probe = scc_init_one, - .remove = __devexit_p(scc_remove), + .remove = scc_remove, }; static int __init scc_ide_init(void) diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c index 35fb8dabb55..a97affca18a 100644 --- a/drivers/ide/serverworks.c +++ b/drivers/ide/serverworks.c @@ -337,7 +337,7 @@ static const struct ide_port_ops svwks_port_ops = { .cable_detect = svwks_cable_detect, }; -static const struct ide_port_info serverworks_chipsets[] __devinitdata = { +static const struct ide_port_info serverworks_chipsets[] = { { /* 0: OSB4 */ .name = DRV_NAME, .init_chipset = init_chipset_svwks, @@ -391,7 +391,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d; u8 idx = id->driver_data; diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index ab3db61d2ba..34a5e5223d5 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -8,6 +8,7 @@ #include <linux/types.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c index e3ea591f66d..63761db6138 100644 --- a/drivers/ide/sgiioc4.c +++ b/drivers/ide/sgiioc4.c @@ -307,8 +307,7 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif) } /* Creates a DMA map for the scatter-gather list entries */ -static int __devinit ide_dma_sgiioc4(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; @@ -520,7 +519,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { .dma_lost_irq = sgiioc4_dma_lost_irq, }; -static const struct ide_port_info sgiioc4_port_info __devinitconst = { +static const struct ide_port_info sgiioc4_port_info = { .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, @@ -532,7 +531,7 @@ static const struct ide_port_info sgiioc4_port_info __devinitconst = { .mwdma_mask = ATA_MWDMA2_ONLY, }; -static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev) +static int sgiioc4_ide_setup_pci_device(struct pci_dev *dev) { unsigned long cmd_base, irqport; unsigned long bar0, cmd_phys_base, ctl; @@ -581,7 +580,7 @@ req_mem_rgn_err: return rc; } -static unsigned int __devinit pci_init_sgiioc4(struct pci_dev *dev) +static unsigned int pci_init_sgiioc4(struct pci_dev *dev) { int ret; @@ -601,7 +600,7 @@ out: return ret; } -int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd) +static int ioc4_ide_attach_one(struct ioc4_driver_data *idd) { /* * PCI-RT does not bring out IDE connection. @@ -613,7 +612,7 @@ int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd) return pci_init_sgiioc4(idd->idd_pdev); } -static struct ioc4_submodule __devinitdata ioc4_ide_submodule = { +static struct ioc4_submodule ioc4_ide_submodule = { .is_name = "IOC4_ide", .is_owner = THIS_MODULE, .is_probe = ioc4_ide_attach_one, diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c index ddeda444a27..6a1849bb476 100644 --- a/drivers/ide/siimage.c +++ b/drivers/ide/siimage.c @@ -546,7 +546,7 @@ static int init_chipset_siimage(struct pci_dev *dev) * extended PRD tables. For better SI3112 support use the libata driver */ -static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) +static void init_mmio_iops_siimage(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); @@ -646,7 +646,7 @@ static void sil_quirkproc(ide_drive_t *drive) * can get the iops right before using them. */ -static void __devinit init_iops_siimage(ide_hwif_t *hwif) +static void init_iops_siimage(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); @@ -719,7 +719,7 @@ static const struct ide_dma_ops sil_dma_ops = { .udma_mask = ATA_UDMA6, \ } -static const struct ide_port_info siimage_chipsets[] __devinitdata = { +static const struct ide_port_info siimage_chipsets[] = { /* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops), /* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops) }; @@ -733,8 +733,7 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit siimage_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id) { void __iomem *ioaddr = NULL; resource_size_t bar5 = pci_resource_start(dev, 5); @@ -790,7 +789,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev, return rc; } -static void __devexit siimage_remove(struct pci_dev *dev) +static void siimage_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); void __iomem *ioaddr = host->host_priv; @@ -822,7 +821,7 @@ static struct pci_driver siimage_pci_driver = { .name = "SiI_IDE", .id_table = siimage_pci_tbl, .probe = siimage_init_one, - .remove = __devexit_p(siimage_remove), + .remove = siimage_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c index db7f4e761db..247853ea136 100644 --- a/drivers/ide/sis5513.c +++ b/drivers/ide/sis5513.c @@ -53,7 +53,7 @@ #define DRV_NAME "sis5513" -/* registers layout and init values are chipset family dependant */ +/* registers layout and init values are chipset family dependent */ #define ATA_16 0x01 #define ATA_33 0x02 @@ -362,7 +362,7 @@ static u8 sis_ata133_udma_filter(ide_drive_t *drive) return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5; } -static int __devinit sis_find_family(struct pci_dev *dev) +static int sis_find_family(struct pci_dev *dev) { struct pci_dev *host; int i = 0; @@ -406,7 +406,7 @@ static int __devinit sis_find_family(struct pci_dev *dev) pci_name(dev)); chipset_family = ATA_133; - /* Check for 5513 compability mapping + /* Check for 5513 compatibility mapping * We must use this, else the port enabled code will fail, * as it expects the enablebits at 0x4a. */ @@ -563,7 +563,7 @@ static const struct ide_port_ops sis_ata133_port_ops = { .cable_detect = sis_cable_detect, }; -static const struct ide_port_info sis5513_chipset __devinitdata = { +static const struct ide_port_info sis5513_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_sis5513, .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} }, @@ -572,7 +572,7 @@ static const struct ide_port_info sis5513_chipset __devinitdata = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d = sis5513_chipset; u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; @@ -595,7 +595,7 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi return ide_pci_init_one(dev, &d, NULL); } -static void __devexit sis5513_remove(struct pci_dev *dev) +static void sis5513_remove(struct pci_dev *dev) { ide_pci_remove(dev); pci_disable_device(dev); @@ -613,7 +613,7 @@ static struct pci_driver sis5513_pci_driver = { .name = "SIS_IDE", .id_table = sis5513_pci_tbl, .probe = sis5513_init_one, - .remove = __devexit_p(sis5513_remove), + .remove = sis5513_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c index f21dc2ad768..8755df3330a 100644 --- a/drivers/ide/sl82c105.c +++ b/drivers/ide/sl82c105.c @@ -299,7 +299,7 @@ static const struct ide_dma_ops sl82c105_dma_ops = { .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info sl82c105_chipset __devinitdata = { +static const struct ide_port_info sl82c105_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_sl82c105, .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, @@ -313,7 +313,7 @@ static const struct ide_port_info sl82c105_chipset __devinitdata = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d = sl82c105_chipset; u8 rev = sl82c105_bridge_revision(dev); diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c index 864ffe0e26d..8af92bbb3dc 100644 --- a/drivers/ide/slc90e66.c +++ b/drivers/ide/slc90e66.c @@ -132,7 +132,7 @@ static const struct ide_port_ops slc90e66_port_ops = { .cable_detect = slc90e66_cable_detect, }; -static const struct ide_port_info slc90e66_chipset __devinitdata = { +static const struct ide_port_info slc90e66_chipset = { .name = DRV_NAME, .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} }, .port_ops = &slc90e66_port_ops, @@ -142,7 +142,8 @@ static const struct ide_port_info slc90e66_chipset __devinitdata = { .udma_mask = ATA_UDMA4, }; -static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int slc90e66_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { return ide_pci_init_one(dev, &slc90e66_chipset, NULL); } diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c index e444d24934b..17e6132b99b 100644 --- a/drivers/ide/tc86c001.c +++ b/drivers/ide/tc86c001.c @@ -10,6 +10,7 @@ #include <linux/types.h> #include <linux/pci.h> #include <linux/ide.h> +#include <linux/module.h> #define DRV_NAME "tc86c001" @@ -143,7 +144,7 @@ static u8 tc86c001_cable_detect(ide_hwif_t *hwif) return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) +static void init_hwif_tc86c001(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long sc_base = pci_resource_start(dev, 5); @@ -191,7 +192,7 @@ static const struct ide_dma_ops tc86c001_dma_ops = { .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info tc86c001_chipset __devinitdata = { +static const struct ide_port_info tc86c001_chipset = { .name = DRV_NAME, .init_hwif = init_hwif_tc86c001, .port_ops = &tc86c001_port_ops, @@ -202,8 +203,8 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = { .udma_mask = ATA_UDMA4, }; -static int __devinit tc86c001_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int tc86c001_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { int rc; @@ -231,7 +232,7 @@ out: return rc; } -static void __devexit tc86c001_remove(struct pci_dev *dev) +static void tc86c001_remove(struct pci_dev *dev) { ide_pci_remove(dev); pci_release_region(dev, 5); @@ -248,7 +249,7 @@ static struct pci_driver tc86c001_pci_driver = { .name = "TC86C001", .id_table = tc86c001_pci_tbl, .probe = tc86c001_init_one, - .remove = __devexit_p(tc86c001_remove), + .remove = tc86c001_remove, }; static int __init tc86c001_ide_init(void) diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c index 7953447eae0..7f1af9493f0 100644 --- a/drivers/ide/triflex.c +++ b/drivers/ide/triflex.c @@ -22,7 +22,7 @@ * Loosely based on the piix & svwks drivers. * * Documentation: - * Not publically available. + * Not publicly available. */ #include <linux/types.h> @@ -92,7 +92,7 @@ static const struct ide_port_ops triflex_port_ops = { .set_dma_mode = triflex_set_mode, }; -static const struct ide_port_info triflex_device __devinitdata = { +static const struct ide_port_info triflex_device = { .name = DRV_NAME, .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}}, .port_ops = &triflex_port_ops, @@ -101,8 +101,7 @@ static const struct ide_port_info triflex_device __devinitdata = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit triflex_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &triflex_device, NULL); } @@ -113,12 +112,26 @@ static const struct pci_device_id triflex_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, triflex_pci_tbl); +#ifdef CONFIG_PM +static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state) +{ + /* + * We must not disable or powerdown the device. + * APM bios refuses to suspend if IDE is not accessible. + */ + pci_save_state(dev); + return 0; +} +#else +#define triflex_ide_pci_suspend NULL +#endif + static struct pci_driver triflex_pci_driver = { .name = "TRIFLEX_IDE", .id_table = triflex_pci_tbl, .probe = triflex_init_one, .remove = ide_pci_remove, - .suspend = ide_pci_suspend, + .suspend = triflex_ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/trm290.c b/drivers/ide/trm290.c index 4b42ca09153..0069f6ce74c 100644 --- a/drivers/ide/trm290.c +++ b/drivers/ide/trm290.c @@ -231,7 +231,7 @@ static void trm290_dma_host_set(ide_drive_t *drive, int on) { } -static void __devinit init_hwif_trm290(ide_hwif_t *hwif) +static void init_hwif_trm290(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned int cfg_base = pci_resource_start(dev, 4); @@ -324,7 +324,7 @@ static struct ide_dma_ops trm290_dma_ops = { .dma_check = trm290_dma_check, }; -static const struct ide_port_info trm290_chipset __devinitdata = { +static const struct ide_port_info trm290_chipset = { .name = DRV_NAME, .init_hwif = init_hwif_trm290, .tp_ops = &trm290_tp_ops, @@ -338,7 +338,7 @@ static const struct ide_port_info trm290_chipset __devinitdata = { IDE_HFLAG_NO_LBA48, }; -static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &trm290_chipset, NULL); } diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index 1d80f1fdbc9..68edd4f58a2 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -58,13 +58,13 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - struct tx4938ide_platform_info *pdata = hwif->dev->platform_data; + struct tx4938ide_platform_info *pdata = dev_get_platdata(hwif->dev); u8 safe = drive->pio_mode - XFER_PIO_0; ide_drive_t *pair; pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, pair->pio_mode - XFER_PIO_0); + safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0); tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe); } @@ -117,7 +117,7 @@ static const struct ide_port_ops tx4938ide_port_ops = { .set_pio_mode = tx4938ide_set_pio_mode, }; -static const struct ide_port_info tx4938ide_port_info __initdata = { +static const struct ide_port_info tx4938ide_port_info __initconst = { .port_ops = &tx4938ide_port_ops, #ifdef __BIG_ENDIAN .tp_ops = &tx4938ide_tp_ops, @@ -132,7 +132,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev) struct ide_hw hw, *hws[] = { &hw }; struct ide_host *host; struct resource *res; - struct tx4938ide_platform_info *pdata = pdev->dev.platform_data; + struct tx4938ide_platform_info *pdata = dev_get_platdata(&pdev->dev); int irq, ret, i; unsigned long mapbase, mapctl; struct ide_port_info d = tx4938ide_port_info; @@ -203,18 +203,7 @@ static struct platform_driver tx4938ide_driver = { .remove = __exit_p(tx4938ide_remove), }; -static int __init tx4938ide_init(void) -{ - return platform_driver_probe(&tx4938ide_driver, tx4938ide_probe); -} - -static void __exit tx4938ide_exit(void) -{ - platform_driver_unregister(&tx4938ide_driver); -} - -module_init(tx4938ide_init); -module_exit(tx4938ide_exit); +module_platform_driver_probe(tx4938ide_driver, tx4938ide_probe); MODULE_DESCRIPTION("TX4938 internal IDE driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 3c736775187..4ecdee5eca8 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -114,7 +114,7 @@ static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, pair->pio_mode - XFER_PIO_0); + safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0); /* * Update Command Transfer Mode for master/slave and Data * Transfer Mode for this drive. @@ -522,7 +522,7 @@ static const struct ide_dma_ops tx4939ide_dma_ops = { .dma_sff_read_status = tx4939ide_dma_sff_read_status, }; -static const struct ide_port_info tx4939ide_port_info __initdata = { +static const struct ide_port_info tx4939ide_port_info __initconst = { .init_hwif = tx4939ide_init_hwif, .init_dma = tx4939ide_init_dma, .port_ops = &tx4939ide_port_ops, @@ -551,10 +551,10 @@ static int __init tx4939ide_probe(struct platform_device *pdev) return -ENODEV; if (!devm_request_mem_region(&pdev->dev, res->start, - res->end - res->start + 1, "tx4938ide")) + resource_size(res), "tx4938ide")) return -EBUSY; mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start, - res->end - res->start + 1); + resource_size(res)); if (!mapbase) return -EBUSY; memset(&hw, 0, sizeof(hw)); @@ -624,18 +624,7 @@ static struct platform_driver tx4939ide_driver = { .resume = tx4939ide_resume, }; -static int __init tx4939ide_init(void) -{ - return platform_driver_probe(&tx4939ide_driver, tx4939ide_probe); -} - -static void __exit tx4939ide_exit(void) -{ - platform_driver_unregister(&tx4939ide_driver); -} - -module_init(tx4939ide_init); -module_exit(tx4939ide_exit); +module_platform_driver_probe(tx4939ide_driver, tx4939ide_probe); MODULE_DESCRIPTION("TX4939 internal IDE driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c index 47adcd09cb2..3aa0fea0f3d 100644 --- a/drivers/ide/umc8672.c +++ b/drivers/ide/umc8672.c @@ -128,7 +128,7 @@ static const struct ide_port_ops umc8672_port_ops = { .set_pio_mode = umc_set_pio_mode, }; -static const struct ide_port_info umc8672_port_info __initdata = { +static const struct ide_port_info umc8672_port_info __initconst = { .name = DRV_NAME, .chipset = ide_umc8672, .port_ops = &umc8672_port_ops, @@ -160,7 +160,7 @@ static int __init umc8672_probe(void) return ide_legacy_device_add(&umc8672_port_info, 0); } -static int probe_umc8672; +static bool probe_umc8672; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index e65d010b708..01464f1e233 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -14,7 +14,7 @@ * Andre Hedrick * * Documentation: - * Obsolete device documentation publically available from via.com.tw + * Obsolete device documentation publicly available from via.com.tw * Current device documentation available under NDA only */ @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> @@ -78,7 +79,7 @@ static struct via_isa_bridge { { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt6415", PCI_DEVICE_ID_VIA_6410, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, @@ -110,7 +111,6 @@ struct via82cxxx_dev { struct via_isa_bridge *via_config; unsigned int via_80w; - u8 cached_device[2]; }; /** @@ -403,66 +403,10 @@ static const struct ide_port_ops via_port_ops = { .cable_detect = via82cxxx_cable_detect, }; -static void via_write_devctl(ide_hwif_t *hwif, u8 ctl) -{ - struct via82cxxx_dev *vdev = hwif->host->host_priv; - - outb(ctl, hwif->io_ports.ctl_addr); - outb(vdev->cached_device[hwif->channel], hwif->io_ports.device_addr); -} - -static void __via_dev_select(ide_drive_t *drive, u8 select) -{ - ide_hwif_t *hwif = drive->hwif; - struct via82cxxx_dev *vdev = hwif->host->host_priv; - - outb(select, hwif->io_ports.device_addr); - vdev->cached_device[hwif->channel] = select; -} - -static void via_dev_select(ide_drive_t *drive) -{ - __via_dev_select(drive, drive->select | ATA_DEVICE_OBS); -} - -static void via_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - - if (valid & IDE_VALID_FEATURE) - outb(tf->feature, io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - outb(tf->nsect, io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - outb(tf->lbal, io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - outb(tf->lbam, io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - outb(tf->lbah, io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - __via_dev_select(drive, tf->device); -} - -const struct ide_tp_ops via_tp_ops = { - .exec_command = ide_exec_command, - .read_status = ide_read_status, - .read_altstatus = ide_read_altstatus, - .write_devctl = via_write_devctl, - - .dev_select = via_dev_select, - .tf_load = via_tf_load, - .tf_read = ide_tf_read, - - .input_data = ide_input_data, - .output_data = ide_output_data, -}; - -static const struct ide_port_info via82cxxx_chipset __devinitdata = { +static const struct ide_port_info via82cxxx_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_via82cxxx, .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, - .tp_ops = &via_tp_ops, .port_ops = &via_port_ops, .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | IDE_HFLAG_POST_SET_MODE | @@ -472,7 +416,7 @@ static const struct ide_port_info via82cxxx_chipset __devinitdata = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int via_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct pci_dev *isa = NULL; struct via_isa_bridge *via_config; @@ -545,7 +489,7 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i return rc; } -static void __devexit via_remove(struct pci_dev *dev) +static void via_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct via82cxxx_dev *vdev = host->host_priv; @@ -570,7 +514,7 @@ static struct pci_driver via_pci_driver = { .name = "VIA_IDE", .id_table = via_pci_tbl, .probe = via_init_one, - .remove = __devexit_p(via_remove), + .remove = via_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; |