diff options
Diffstat (limited to 'drivers/ide')
100 files changed, 6815 insertions, 8525 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 3f9503867e6..a04c49f2a01 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -7,57 +7,36 @@ config HAVE_IDE bool menuconfig IDE - tristate "ATA/ATAPI/MFM/RLL support" + tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)" depends on HAVE_IDE depends on BLOCK ---help--- - If you say Y here, your kernel will be able to manage low cost mass - storage units such as ATA/(E)IDE and ATAPI units. The most common - cases are IDE hard drives and ATAPI CD-ROM drives. - - If your system is pure SCSI and doesn't use these interfaces, you - can say N here. - - Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard - for mass storage units such as hard disks. It was designed by - Western Digital and Compaq Computer in 1984. It was then named - ST506. Quite a number of disks use the IDE interface. - - AT Attachment (ATA) is the superset of the IDE specifications. - ST506 was also called ATA-1. - - Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is - ATA-3. It provides support for larger disks (up to 8.4GB by means of - the LBA standard), more disks (4 instead of 2) and for other mass - storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is - ATA-4 and provides faster (and more CPU friendly) transfer modes - than previous PIO (Programmed processor Input/Output) from previous - ATA/IDE standards by means of fast DMA controllers. - - ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and - CD-ROM drives, similar in many respects to the SCSI protocol. - - SMART IDE (Self Monitoring, Analysis and Reporting Technology) was - designed in order to prevent data corruption and disk crash by - detecting pre hardware failure conditions (heat, access time, and - the like...). Disks built since June 1995 may follow this standard. - The kernel itself doesn't manage this; however there are quite a - number of user programs such as smart that can query the status of - SMART parameters from disk drives. + If you say Y here, your kernel will be able to manage ATA/(E)IDE and + ATAPI units. The most common cases are IDE hard drives and ATAPI + CD-ROM drives. + + This subsystem is currently in maintenance mode with only bug fix + changes applied. Users of ATA hardware are encouraged to migrate to + the newer ATA subsystem ("Serial ATA (prod) and Parallel ATA + (experimental) drivers") which is more actively maintained. To compile this driver as a module, choose M here: the - module will be called ide. + module will be called ide-core. For further information, please read <file:Documentation/ide/ide.txt>. - If unsure, say Y. + If unsure, say N. if IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_XFER_MODE + bool + config IDE_TIMINGS bool + select IDE_XFER_MODE config IDE_ATAPI bool @@ -155,7 +134,7 @@ config BLK_DEV_IDECD module will be called ide-cd. config BLK_DEV_IDECD_VERBOSE_ERRORS - bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED + bool "Verbose error logging for IDE/ATAPI CDROM driver" if EXPERT depends on BLK_DEV_IDECD default y help @@ -218,7 +197,8 @@ comment "IDE chipset support/bugfixes" config IDE_GENERIC tristate "generic/default IDE chipset support" - depends on ALPHA || X86 || IA64 || M32R || MIPS + depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC + default ARM && ARCH_RPC help This is the generic IDE driver. This driver attaches to the fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and @@ -342,12 +322,11 @@ config BLK_DEV_GENERIC which otherwise might not be supported. config BLK_DEV_OPTI621 - tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "OPTi 82C621 chipset enhanced support" select BLK_DEV_IDEPCI help This is a driver for the OPTi 82C621 EIDE controller. - Please read the comments at the top of <file:drivers/ide/pci/opti621.c>. + Please read the comments at the top of <file:drivers/ide/opti621.c>. config BLK_DEV_RZ1000 tristate "RZ1000 chipset bugfix/support" @@ -385,7 +364,7 @@ config BLK_DEV_ALI15X3 normal dual channel support. Please read the comments at the top of - <file:drivers/ide/pci/alim15x3.c>. + <file:drivers/ide/alim15x3.c>. If unsure, say N. @@ -437,7 +416,7 @@ config BLK_DEV_CY82C693 config BLK_DEV_CS5520 tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on X86_32 || COMPILE_TEST select BLK_DEV_IDEDMA_PCI help Include support for PIO tuning and virtual DMA on the Cyrix MediaGX @@ -448,6 +427,7 @@ config BLK_DEV_CS5520 config BLK_DEV_CS5530 tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support" + depends on X86_32 || COMPILE_TEST select BLK_DEV_IDEDMA_PCI help Include support for UDMA on the Cyrix MediaGX 5530 chipset. This @@ -457,7 +437,7 @@ config BLK_DEV_CS5530 config BLK_DEV_CS5535 tristate "AMD CS5535 chipset support" - depends on X86 && !X86_64 + depends on X86_32 select BLK_DEV_IDEDMA_PCI help Include support for UDMA on the NSC/AMD CS5535 companion chipset. @@ -465,6 +445,16 @@ config BLK_DEV_CS5535 It is safe to say Y to this question. +config BLK_DEV_CS5536 + tristate "CS5536 chipset support" + depends on X86_32 + select BLK_DEV_IDEDMA_PCI + help + This option enables support for the AMD CS5536 + companion chip used with the Geode LX processor family. + + If unsure, say N. + config BLK_DEV_HPT366 tristate "HPT36X/37X chipset support" select BLK_DEV_IDEDMA_PCI @@ -498,6 +488,7 @@ config BLK_DEV_JMICRON config BLK_DEV_SC1200 tristate "National SCx200 chipset support" + depends on X86_32 || COMPILE_TEST select BLK_DEV_IDEDMA_PCI help This driver adds support for the on-board IDE controller on the @@ -538,7 +529,7 @@ config BLK_DEV_NS87415 This driver adds detection and support for the NS87415 chip (used mainly on SPARC64 and PA-RISC machines). - Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>. + Please read the comments at the top of <file:drivers/ide/ns87415.c>. config BLK_DEV_PDC202XX_OLD tristate "PROMISE PDC202{46|62|65|67} support" @@ -557,7 +548,7 @@ config BLK_DEV_PDC202XX_OLD for more than one card. Please read the comments at the top of - <file:drivers/ide/pci/pdc202xx_old.c>. + <file:drivers/ide/pdc202xx_old.c>. If unsure, say N. @@ -603,7 +594,7 @@ config BLK_DEV_SIS5513 ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740, SiS745, SiS750 - Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>. + Please read the comments at the top of <file:drivers/ide/sis5513.c>. config BLK_DEV_SL82C105 tristate "Winbond SL82c105 support" @@ -626,7 +617,7 @@ config BLK_DEV_SLC90E66 look-a-like to the PIIX4 it should be a nice addition. Please read the comments at the top of - <file:drivers/ide/pci/slc90e66.c>. + <file:drivers/ide/slc90e66.c>. config BLK_DEV_TRM290 tristate "Tekram TRM290 chipset support" @@ -635,7 +626,7 @@ config BLK_DEV_TRM290 This driver adds support for bus master DMA transfers using the Tekram TRM290 PCI IDE chip. Volunteers are needed for further tweaking and development. - Please read the comments at the top of <file:drivers/ide/pci/trm290.c>. + Please read the comments at the top of <file:drivers/ide/trm290.c>. config BLK_DEV_VIA82CXXX tristate "VIA82CXXX chipset support" @@ -666,7 +657,7 @@ endif # TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" - depends on PPC_PMAC && IDE=y + depends on PPC_PMAC select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help @@ -687,24 +678,20 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 + depends on MIPS_ALCHEMY + select IDE_XFER_MODE choice prompt "IDE Mode for AMD Alchemy Au1200" - default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + default BLK_DEV_IDE_AU1XXX_PIO_DBDMA + depends on BLK_DEV_IDE_AU1XXX config BLK_DEV_IDE_AU1XXX_PIO_DBDMA bool "PIO+DbDMA IDE for AMD Alchemy Au1200" config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX -endchoice - -config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - int "Maximum transfer size (KB) per request (up to 128)" - default "128" depends on BLK_DEV_IDE_AU1XXX +endchoice config BLK_DEV_IDE_TX4938 tristate "TX4938 internal IDE support" @@ -716,11 +703,6 @@ config BLK_DEV_IDE_TX4939 depends on SOC_TX4939 select BLK_DEV_IDEDMA_SFF -config IDE_ARM - tristate "ARM IDE support" - depends on ARM && (ARCH_RPC || ARCH_SHARK) - default y - config BLK_DEV_IDE_ICSIDE tristate "ICS IDE interface support" depends on ARM && ARCH_ACORN @@ -743,13 +725,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config IDE_H8300 - tristate "H8300 IDE support" - depends on H8300 - default y - help - Enables the H8300 IDE driver. - config BLK_DEV_GAYLE tristate "Amiga Gayle IDE interface support" depends on AMIGA @@ -759,31 +734,24 @@ config BLK_DEV_GAYLE This includes on-board IDE interfaces on some Amiga models (A600, A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion bus (M-Tech E-Matrix 530 expansion card). - Say Y if you have an Amiga with a Gayle IDE interface and want to use - IDE devices (hard disks, CD-ROM drives, etc.) that are connected to - it. - Note that you also have to enable Zorro bus support if you want to - use Gayle IDE interfaces on the Zorro expansion bus. -config BLK_DEV_IDEDOUBLER - bool "Amiga IDE Doubler support (EXPERIMENTAL)" - depends on BLK_DEV_GAYLE && EXPERIMENTAL - ---help--- - This feature provides support for the so-called `IDE doublers' (made + It also provides support for the so-called `IDE doublers' (made by various manufacturers, e.g. Eyetech) that can be connected to the on-board IDE interface of some Amiga models. Using such an IDE doubler, you can connect up to four instead of two IDE devices to - the Amiga's on-board IDE interface. + the Amiga's on-board IDE interface. The feature is enabled at kernel + runtime using the "gayle.doubler" kernel boot parameter. - Note that the normal Amiga Gayle IDE driver may not work correctly - if you have an IDE doubler and don't enable this feature! + Say Y if you have an Amiga with a Gayle IDE interface and want to use + IDE devices (hard disks, CD-ROM drives, etc.) that are connected to + it. - Say Y if you have an IDE doubler. The feature is enabled at kernel - runtime using the "gayle.doubler" kernel boot parameter. + Note that you also have to enable Zorro bus support if you want to + use Gayle IDE interfaces on the Zorro expansion bus. config BLK_DEV_BUDDHA - tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" - depends on ZORRO && EXPERIMENTAL + tristate "Buddha/Catweasel/X-Surf IDE interface support" + depends on ZORRO help This is the IDE driver for the IDE interfaces on the Buddha, Catweasel and X-Surf expansion boards. It supports up to two interfaces on the @@ -857,17 +825,18 @@ config BLK_DEV_ALI14XX of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster I/O speeds to be set as well. See the files <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/ali14xx.c> for more info. + <file:drivers/ide/ali14xx.c> for more info. config BLK_DEV_DTC2278 tristate "DTC-2278 support" + select IDE_XFER_MODE select IDE_LEGACY help This driver is enabled at runtime using the "dtc2278.probe" kernel boot parameter. It enables support for the secondary IDE interface of the DTC-2278 card, and permits faster I/O speeds to be set as well. See the <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/dtc2278.c> files for more info. + <file:drivers/ide/dtc2278.c> files for more info. config BLK_DEV_HT6560B tristate "Holtek HT6560B support" @@ -878,7 +847,7 @@ config BLK_DEV_HT6560B boot parameter. It enables support for the secondary IDE interface of the Holtek card, and permits faster I/O speeds to be set as well. See the <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/ht6560b.c> files for more info. + <file:drivers/ide/ht6560b.c> files for more info. config BLK_DEV_QD65XX tristate "QDI QD65xx support" @@ -887,23 +856,25 @@ config BLK_DEV_QD65XX help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the - <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> + <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c> for more info. config BLK_DEV_UMC8672 tristate "UMC-8672 support" + select IDE_XFER_MODE select IDE_LEGACY help This driver is enabled at runtime using the "umc8672.probe" kernel boot parameter. It enables support for the secondary IDE interface of the UMC-8672, and permits faster I/O speeds to be set as well. See the files <file:Documentation/ide/ide.txt> and - <file:drivers/ide/legacy/umc8672.c> for more info. + <file:drivers/ide/umc8672.c> for more info. endif config BLK_DEV_IDEDMA def_bool BLK_DEV_IDEDMA_SFF || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + select IDE_XFER_MODE endif # IDE diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index c2b9c93f009..a04ee82f1c8 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -2,12 +2,14 @@ # link order is important here # -EXTRA_CFLAGS += -Idrivers/ide +ccflags-y := -Idrivers/ide ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ - ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o ide-sysfs.o + ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o \ + ide-io-std.o ide-eh.o # core IDE code +ide-core-$(CONFIG_IDE_XFER_MODE) += ide-pio-blacklist.o ide-xfer-mode.o ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o @@ -19,8 +21,6 @@ ide-core-$(CONFIG_IDE_LEGACY) += ide-legacy.o obj-$(CONFIG_IDE) += ide-core.o -obj-$(CONFIG_IDE_ARM) += ide_arm.o - obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o @@ -43,6 +43,7 @@ obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o +obj-$(CONFIG_BLK_DEV_CS5536) += cs5536.o obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o @@ -77,8 +78,6 @@ obj-$(CONFIG_BLK_DEV_CMD640) += cmd640.o obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o -obj-$(CONFIG_IDE_H8300) += ide-h8300.o - obj-$(CONFIG_IDE_GENERIC) += ide-generic.o obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c index 4485b9c6f0e..c7eaf20af92 100644 --- a/drivers/ide/aec62xx.c +++ b/drivers/ide/aec62xx.c @@ -81,15 +81,15 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr return chipset_table->ultra_settings; } -static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) +static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; u16 d_conf = 0; u8 ultra = 0, ultra_conf = 0; u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; + const u8 speed = drive->dma_mode; unsigned long flags; local_irq_save(flags); @@ -109,15 +109,15 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) local_irq_restore(flags); } -static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) +static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; u8 unit = drive->dn & 1; u8 tmp1 = 0, tmp2 = 0; u8 ultra = 0, drive_conf = 0, ultra_conf = 0; + const u8 speed = drive->dma_mode; unsigned long flags; local_irq_save(flags); @@ -134,12 +134,13 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) local_irq_restore(flags); } -static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); + drive->dma_mode = drive->pio_mode; + hwif->port_ops->set_dma_mode(hwif, drive); } -static unsigned int init_chipset_aec62xx(struct pci_dev *dev) +static int init_chipset_aec62xx(struct pci_dev *dev) { /* These are necessary to get AEC6280 Macintosh cards to work */ if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) || @@ -156,7 +157,7 @@ static unsigned int init_chipset_aec62xx(struct pci_dev *dev) pci_write_config_byte(dev, 0x4a, reg4ah | 0x80); } - return dev->irq; + return 0; } static u8 atp86x_cable_detect(ide_hwif_t *hwif) @@ -180,7 +181,7 @@ static const struct ide_port_ops atp86x_port_ops = { .cable_detect = atp86x_cable_detect, }; -static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { +static const struct ide_port_info aec62xx_chipsets[] = { { /* 0: AEC6210 */ .name = DRV_NAME, .init_chipset = init_chipset_aec62xx, @@ -250,7 +251,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { * chips, pass a local copy of 'struct ide_port_info' down the call chain. */ -static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct chipset_bus_clock_list_entry *bus_clock; struct ide_port_info d; @@ -286,7 +287,7 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi return err; } -static void __devexit aec62xx_remove(struct pci_dev *dev) +static void aec62xx_remove(struct pci_dev *dev) { ide_pci_remove(dev); pci_disable_device(dev); @@ -306,7 +307,7 @@ static struct pci_driver aec62xx_pci_driver = { .name = "AEC62xx_IDE", .id_table = aec62xx_pci_tbl, .probe = aec62xx_init_one, - .remove = __devexit_p(aec62xx_remove), + .remove = aec62xx_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c index 90da1f953ed..8f3570ee64c 100644 --- a/drivers/ide/ali14xx.c +++ b/drivers/ide/ali14xx.c @@ -52,13 +52,13 @@ /* port addresses for auto-detection */ #define ALI_NUM_PORTS 4 -static const int ports[ALI_NUM_PORTS] __initdata = +static const int ports[ALI_NUM_PORTS] __initconst = { 0x074, 0x0f4, 0x034, 0x0e4 }; /* register initialization data */ typedef struct { u8 reg, data; } RegInitializer; -static const RegInitializer initData[] __initdata = { +static const RegInitializer initData[] __initconst = { {0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00}, {0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00}, @@ -109,13 +109,14 @@ static DEFINE_SPINLOCK(ali14xx_lock); * This function computes timing parameters * and sets controller registers accordingly. */ -static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void ali14xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int driveNum; int time1, time2; u8 param1, param2, param3, param4; unsigned long flags; int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; + const u8 pio = drive->pio_mode - XFER_PIO_0; struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); /* calculate timing, according to PIO mode */ @@ -220,7 +221,7 @@ static int __init ali14xx_probe(void) return ide_legacy_device_add(&ali14xx_port_info, 0); } -static int probe_ali14xx; +static bool probe_ali14xx; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets"); diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index 66f43083408..36f76e28a0b 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -8,7 +8,7 @@ * Copyright (C) 2002 Alan Cox * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz * * (U)DMA capable version of ali 1533/1543(C), 1535(D) * @@ -40,16 +40,6 @@ #define DRV_NAME "alim15x3" /* - * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking - * (this is DANGEROUS and could result in data corruption). - */ -static int wdc_udma; - -module_param(wdc_udma, bool, 0); -MODULE_PARM_DESC(wdc_udma, - "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)"); - -/* * ALi devices are not plug in. Otherwise these static values would * need to go. They ought to go away anyway */ @@ -58,61 +48,84 @@ static u8 m5229_revision; static u8 chip_is_1543c_e; static struct pci_dev *isa_dev; +static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on) +{ + struct pci_dev *pdev = to_pci_dev(hwif->dev); + int pio_fifo = 0x54 + hwif->channel; + u8 fifo; + int shift = 4 * (drive->dn & 1); + + pci_read_config_byte(pdev, pio_fifo, &fifo); + fifo &= ~(0x0F << shift); + fifo |= (on << shift); + pci_write_config_byte(pdev, pio_fifo, fifo); +} + +static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive, + struct ide_timing *t, u8 ultra) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + int port = hwif->channel ? 0x5c : 0x58; + int udmat = 0x56 + hwif->channel; + u8 unit = drive->dn & 1, udma; + int shift = 4 * unit; + + /* Set up the UDMA */ + pci_read_config_byte(dev, udmat, &udma); + udma &= ~(0x0F << shift); + udma |= ultra << shift; + pci_write_config_byte(dev, udmat, udma); + + if (t == NULL) + return; + + t->setup = clamp_val(t->setup, 1, 8) & 7; + t->act8b = clamp_val(t->act8b, 1, 8) & 7; + t->rec8b = clamp_val(t->rec8b, 1, 16) & 15; + t->active = clamp_val(t->active, 1, 8) & 7; + t->recover = clamp_val(t->recover, 1, 16) & 15; + + pci_write_config_byte(dev, port, t->setup); + pci_write_config_byte(dev, port + 1, (t->act8b << 4) | t->rec8b); + pci_write_config_byte(dev, port + unit + 2, + (t->active << 4) | t->recover); +} + /** * ali_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Program the controller for the given PIO mode. */ -static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - int s_time = t->setup, a_time = t->active, c_time = t->cycle; - u8 s_clc, a_clc, r_clc; - unsigned long flags; + ide_drive_t *pair = ide_get_pair_dev(drive); int bus_speed = ide_pci_clk ? ide_pci_clk : 33; - int port = hwif->channel ? 0x5c : 0x58; - int portFIFO = hwif->channel ? 0x55 : 0x54; - u8 cd_dma_fifo = 0, unit = drive->dn & 1; - - if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) - s_clc = 0; - if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) - a_clc = 0; - - if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { - r_clc = 1; - } else { - if (r_clc >= 16) - r_clc = 0; + unsigned long T = 1000000 / bus_speed; /* PCI clock based */ + struct ide_timing t; + + ide_timing_compute(drive, drive->pio_mode, &t, T, 1); + if (pair) { + struct ide_timing p; + + ide_timing_compute(pair, pair->pio_mode, &p, T, 1); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); + if (pair->dma_mode) { + ide_timing_compute(pair, pair->dma_mode, &p, T, 1); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); + } } - local_irq_save(flags); - + /* * PIO mode => ATA FIFO on, ATAPI FIFO off */ - pci_read_config_byte(dev, portFIFO, &cd_dma_fifo); - if (drive->media==ide_disk) { - if (unit) { - pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50); - } else { - pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05); - } - } else { - if (unit) { - pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F); - } else { - pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0); - } - } - - pci_write_config_byte(dev, port, s_clc); - pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc); - local_irq_restore(flags); + ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00); + + ali_program_timings(hwif, drive, &t, 0); } /** @@ -132,7 +145,7 @@ static u8 ali_udma_filter(ide_drive_t *drive) if (m5229_revision > 0x20 && m5229_revision < 0xC2) { if (drive->media != ide_disk) return 0; - if (wdc_udma == 0 && chip_is_1543c_e && + if (chip_is_1543c_e && strstr((char *)&drive->id[ATA_ID_PROD], "WDC ")) return 0; } @@ -142,44 +155,42 @@ static u8 ali_udma_filter(ide_drive_t *drive) /** * ali_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Configure the hardware for the desired IDE transfer mode. */ -static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD }; struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 speed1 = speed; - u8 unit = drive->dn & 1; + ide_drive_t *pair = ide_get_pair_dev(drive); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; + unsigned long T = 1000000 / bus_speed; /* PCI clock based */ + const u8 speed = drive->dma_mode; u8 tmpbyte = 0x00; - int m5229_udma = (hwif->channel) ? 0x57 : 0x56; - - if (speed == XFER_UDMA_6) - speed1 = 0x47; + struct ide_timing t; if (speed < XFER_UDMA_0) { - u8 ultra_enable = (unit) ? 0x7f : 0xf7; - /* - * clear "ultra enable" bit - */ - pci_read_config_byte(dev, m5229_udma, &tmpbyte); - tmpbyte &= ultra_enable; - pci_write_config_byte(dev, m5229_udma, tmpbyte); - - /* - * FIXME: Oh, my... DMA timings are never set. - */ + ide_timing_compute(drive, drive->dma_mode, &t, T, 1); + if (pair) { + struct ide_timing p; + + ide_timing_compute(pair, pair->pio_mode, &p, T, 1); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); + if (pair->dma_mode) { + ide_timing_compute(pair, pair->dma_mode, + &p, T, 1); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); + } + } + ali_program_timings(hwif, drive, &t, 0); } else { - pci_read_config_byte(dev, m5229_udma, &tmpbyte); - tmpbyte &= (0x0f << ((1-unit) << 2)); - /* - * enable ultra dma and set timing - */ - tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2)); - pci_write_config_byte(dev, m5229_udma, tmpbyte); + ali_program_timings(hwif, drive, NULL, + udma_timing[speed - XFER_UDMA_0]); if (speed >= XFER_UDMA_3) { pci_read_config_byte(dev, 0x4b, &tmpbyte); tmpbyte |= 1; @@ -189,19 +200,20 @@ static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) } /** - * ali15x3_dma_setup - begin a DMA phase + * ali_dma_check - DMA check * @drive: target device + * @cmd: command * * Returns 1 if the DMA cannot be performed, zero on success. */ -static int ali15x3_dma_setup(ide_drive_t *drive) +static int ali_dma_check(ide_drive_t *drive, struct ide_cmd *cmd) { if (m5229_revision < 0xC2 && drive->media != ide_disk) { - if (rq_data_dir(drive->hwif->rq)) + if (cmd->tf_flags & IDE_TFLAG_WRITE) return 1; /* try PIO instead of DMA */ } - return ide_dma_setup(drive); + return 0; } /** @@ -212,7 +224,7 @@ static int ali15x3_dma_setup(ide_drive_t *drive) * appropriate also sets up the 1533 southbridge. */ -static unsigned int init_chipset_ali15x3(struct pci_dev *dev) +static int init_chipset_ali15x3(struct pci_dev *dev) { unsigned long flags; u8 tmpbyte; @@ -364,19 +376,13 @@ static int ali_cable_override(struct pci_dev *pdev) * * This checks if the controller and the cable are capable * of UDMA66 transfers. It doesn't check the drives. - * But see note 2 below! - * - * FIXME: frobs bits that are not defined on newer ALi devicea */ static u8 ali_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned long flags; u8 cbl = ATA_CBL_PATA40, tmpbyte; - local_irq_save(flags); - if (m5229_revision >= 0xC2) { /* * m5229 80-pin cable detection (from Host View) @@ -396,32 +402,26 @@ static u8 ali_cable_detect(ide_hwif_t *hwif) } } - local_irq_restore(flags); - return cbl; } -#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) +#ifndef CONFIG_SPARC64 /** * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff * @hwif: interface to configure * * Obtain the IRQ tables for an ALi based IDE solution on the PC * class platforms. This part of the code isn't applicable to the - * Sparc and PowerPC systems. + * Sparc systems. */ -static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) +static void init_hwif_ali15x3(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); u8 ideic, inmir; s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; int irq = -1; - if (dev->device == PCI_DEVICE_ID_AL_M5229) - hwif->irq = hwif->channel ? 15 : 14; - if (isa_dev) { /* * read IDE interface control @@ -454,7 +454,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) } #else #define init_hwif_ali15x3 NULL -#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */ +#endif /* CONFIG_SPARC64 */ /** * init_dma_ali15x3 - set up DMA on ALi15x3 @@ -464,8 +464,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) * Set up the DMA functionality on the ALi 15x3. */ -static int __devinit init_dma_ali15x3(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int init_dma_ali15x3(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long base = ide_pci_dma_base(hwif, d); @@ -502,17 +501,17 @@ static const struct ide_port_ops ali_port_ops = { static const struct ide_dma_ops ali_dma_ops = { .dma_host_set = ide_dma_host_set, - .dma_setup = ali15x3_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, + .dma_setup = ide_dma_setup, .dma_start = ide_dma_start, .dma_end = ide_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_check = ali_dma_check, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info ali15x3_chipset __devinitdata = { +static const struct ide_port_info ali15x3_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_ali15x3, .init_hwif = init_hwif_ali15x3, @@ -532,7 +531,8 @@ static const struct ide_port_info ali15x3_chipset __devinitdata = { * hot plug layer. */ -static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int alim15x3_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { struct ide_port_info d = ali15x3_chipset; u8 rev = dev->revision, idx = id->driver_data; @@ -597,6 +597,6 @@ static void __exit ali15x3_ide_exit(void) module_init(ali15x3_ide_init); module_exit(ali15x3_ide_exit); -MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox"); +MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 69660a431cd..cbfe846911d 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -3,7 +3,7 @@ * IDE driver for Linux. * * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz + * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz * * Based on the work of: * Andre Hedrick @@ -70,7 +70,8 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, default: return; } - pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t); + if (timing->udma) + pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + 3 - dn, t); } /* @@ -78,14 +79,14 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, * to a desired transfer mode. It also can be called by upper layers. */ -static void amd_set_drive(ide_drive_t *drive, const u8 speed) +static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); ide_drive_t *peer = ide_get_pair_dev(drive); struct ide_timing t, p; int T, UT; u8 udma_mask = hwif->ultra_mask; + const u8 speed = drive->dma_mode; T = 1000000000 / amd_clock; UT = (udma_mask == ATA_UDMA2) ? T : (T / 2); @@ -93,7 +94,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed) ide_timing_compute(drive, speed, &t, T, UT); if (peer) { - ide_timing_compute(peer, peer->current_speed, &p, T, UT); + ide_timing_compute(peer, peer->pio_mode, &p, T, UT); ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } @@ -107,9 +108,10 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed) * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning. */ -static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - amd_set_drive(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + amd_set_drive(hwif, drive); } static void amd7409_cable_detect(struct pci_dev *dev) @@ -140,7 +142,7 @@ static void amd7411_cable_detect(struct pci_dev *dev) * The initialization callback. Initialize drive independent registers. */ -static unsigned int init_chipset_amd74xx(struct pci_dev *dev) +static int init_chipset_amd74xx(struct pci_dev *dev) { u8 t = 0, offset = amd_offset(dev); @@ -166,13 +168,13 @@ static unsigned int init_chipset_amd74xx(struct pci_dev *dev) * Check for broken FIFO support. */ if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411) + dev->device == PCI_DEVICE_ID_AMD_VIPER_7411) t &= 0x0f; else t |= 0xf0; pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t); - return dev->irq; + return 0; } static u8 amd_cable_detect(ide_hwif_t *hwif) @@ -183,14 +185,6 @@ static u8 amd_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - if (hwif->irq == 0) /* 0 is bogus but will do for now */ - hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel); -} - static const struct ide_port_ops amd_port_ops = { .set_pio_mode = amd_set_pio_mode, .set_dma_mode = amd_set_drive, @@ -207,7 +201,6 @@ static const struct ide_port_ops amd_port_ops = { { \ .name = DRV_NAME, \ .init_chipset = init_chipset_amd74xx, \ - .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ @@ -221,7 +214,6 @@ static const struct ide_port_ops amd_port_ops = { { \ .name = DRV_NAME, \ .init_chipset = init_chipset_amd74xx, \ - .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ @@ -231,7 +223,7 @@ static const struct ide_port_ops amd_port_ops = { .udma_mask = udma, \ } -static const struct ide_port_info amd74xx_chipsets[] __devinitdata = { +static const struct ide_port_info amd74xx_chipsets[] = { /* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2), /* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4), /* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5), @@ -243,7 +235,7 @@ static const struct ide_port_info amd74xx_chipsets[] __devinitdata = { /* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5), }; -static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) +static int amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d; u8 idx = id->driver_data; @@ -350,6 +342,6 @@ static void __exit amd74xx_ide_exit(void) module_init(amd74xx_ide_init); module_exit(amd74xx_ide_exit); -MODULE_AUTHOR("Vojtech Pavlik"); +MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("AMD PCI IDE driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c index b2735d28f5c..dbd0f242ec1 100644 --- a/drivers/ide/atiixp.c +++ b/drivers/ide/atiixp.c @@ -42,19 +42,20 @@ static DEFINE_SPINLOCK(atiixp_lock); /** * atiixp_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Set the interface PIO mode. */ -static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long flags; - int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; + int timing_shift = (drive->dn ^ 1) * 8; u32 pio_timing_data; u16 pio_mode_data; + const u8 pio = drive->pio_mode - XFER_PIO_0; spin_lock_irqsave(&atiixp_lock, flags); @@ -74,21 +75,22 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) /** * atiixp_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Set a ATIIXP host controller to the desired DMA mode. This involves * programming the right timing data into the PCI configuration space. */ -static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long flags; - int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; + int timing_shift = (drive->dn ^ 1) * 8; u32 tmp32; u16 tmp16; u16 udma_ctl = 0; + const u8 speed = drive->dma_mode; spin_lock_irqsave(&atiixp_lock, flags); @@ -137,12 +139,11 @@ static const struct ide_port_ops atiixp_port_ops = { .cable_detect = atiixp_cable_detect, }; -static const struct ide_port_info atiixp_pci_info[] __devinitdata = { +static const struct ide_port_info atiixp_pci_info[] = { { /* 0: IXP200/300/400/700 */ .name = DRV_NAME, .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, .port_ops = &atiixp_port_ops, - .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -151,7 +152,7 @@ static const struct ide_port_info atiixp_pci_info[] __devinitdata = { .name = DRV_NAME, .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, .port_ops = &atiixp_port_ops, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS, + .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -167,7 +168,7 @@ static const struct ide_port_info atiixp_pci_info[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL); } @@ -178,6 +179,7 @@ static const struct pci_device_id atiixp_pci_tbl[] = { { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 79a2dfed8eb..259786ca8b7 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -36,13 +36,17 @@ #include <linux/ide.h> #include <linux/scatterlist.h> -#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1xxx_ide.h> #define DRV_NAME "au1200-ide" #define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>" +#ifndef IDE_REG_SHIFT +#define IDE_REG_SHIFT 5 +#endif + /* enable the burstmode in the dbdma */ #define IDE_AU1XXX_BURSTMODE 1 @@ -50,14 +54,14 @@ static _auide_hwif auide_hwif; #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) -void auide_insw(unsigned long port, void *addr, u32 count) +static inline void auide_insw(unsigned long port, void *addr, u32 count) { _auide_hwif *ahwif = &auide_hwif; chan_tab_t *ctp; au1x_ddma_desc_t *dp; - if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, - DDMA_FLAGS_NOIE)) { + if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, virt_to_phys(addr), + count << 1, DDMA_FLAGS_NOIE)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } @@ -68,14 +72,14 @@ void auide_insw(unsigned long port, void *addr, u32 count) ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); } -void auide_outsw(unsigned long port, void *addr, u32 count) +static inline void auide_outsw(unsigned long port, void *addr, u32 count) { _auide_hwif *ahwif = &auide_hwif; chan_tab_t *ctp; au1x_ddma_desc_t *dp; - if(!put_source_flags(ahwif->tx_chan, (void*)addr, - count << 1, DDMA_FLAGS_NOIE)) { + if (!au1xxx_dbdma_put_source(ahwif->tx_chan, virt_to_phys(addr), + count << 1, DDMA_FLAGS_NOIE)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } @@ -86,25 +90,24 @@ void auide_outsw(unsigned long port, void *addr, u32 count) ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); } -static void au1xxx_input_data(ide_drive_t *drive, struct request *rq, +static void au1xxx_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { auide_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); } -static void au1xxx_output_data(ide_drive_t *drive, struct request *rq, +static void au1xxx_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { auide_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); } #endif -static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void au1xxx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); - /* set pio mode! */ - switch(pio) { + switch (drive->pio_mode - XFER_PIO_0) { case 0: mem_sttime = SBC_IDE_TIMING(PIO0); @@ -161,11 +164,11 @@ static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) au_writel(mem_stcfg,MEM_STCFG2); } -static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void auide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); - switch(speed) { + switch (drive->dma_mode) { #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA case XFER_MW_DMA_2: mem_sttime = SBC_IDE_TIMING(MDMA2); @@ -209,23 +212,17 @@ static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed) */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -static int auide_build_dmatable(ide_drive_t *drive) +static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) { - int i, iswrite, count = 0; ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->rq; _auide_hwif *ahwif = &auide_hwif; struct scatterlist *sg; + int i = cmd->sg_nents, count = 0; + int iswrite = !!(cmd->tf_flags & IDE_TFLAG_WRITE); - iswrite = (rq_data_dir(rq) == WRITE); /* Save for interrupt context */ ahwif->drive = drive; - hwif->sg_nents = i = ide_build_sglist(drive, rq); - - if (!i) - return 0; - /* fill the descriptors */ sg = hwif->sg_table; while (i && sg_dma_len(sg)) { @@ -242,7 +239,7 @@ static int auide_build_dmatable(ide_drive_t *drive) if (++count >= PRD_ENTRIES) { printk(KERN_WARNING "%s: DMA table too small\n", drive->name); - goto use_pio_instead; + return 0; } /* Lets enable intr for the last descriptor only */ @@ -252,17 +249,14 @@ static int auide_build_dmatable(ide_drive_t *drive) flags = DDMA_FLAGS_NOIE; if (iswrite) { - if(!put_source_flags(ahwif->tx_chan, - (void*) sg_virt(sg), - tc, flags)) { + if (!au1xxx_dbdma_put_source(ahwif->tx_chan, + sg_phys(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); } - } else - { - if(!put_dest_flags(ahwif->rx_chan, - (void*) sg_virt(sg), - tc, flags)) { + } else { + if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, + sg_phys(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); } @@ -278,21 +272,11 @@ static int auide_build_dmatable(ide_drive_t *drive) if (count) return 1; - use_pio_instead: - ide_destroy_dmatable(drive); - return 0; /* revert to PIO for this request */ } static int auide_dma_end(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - - if (hwif->sg_nents) { - ide_destroy_dmatable(drive); - hwif->sg_nents = 0; - } - return 0; } @@ -301,23 +285,11 @@ static void auide_dma_start(ide_drive_t *drive ) } -static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command) -{ - /* issue cmd to drive */ - ide_execute_command(drive, command, &ide_dma_intr, - (2*WAIT_CMD), NULL); -} - -static int auide_dma_setup(ide_drive_t *drive) +static int auide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { - struct request *rq = drive->hwif->rq; - - if (!auide_build_dmatable(drive)) { - ide_map_sg(drive, rq); + if (auide_build_dmatable(drive, cmd) == 0) return 1; - } - drive->waiting_for_dma = 1; return 0; } @@ -328,8 +300,8 @@ static int auide_dma_test_irq(ide_drive_t *drive) */ drive->waiting_for_dma++; if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { - printk(KERN_WARNING "%s: timeout waiting for ddma to \ - complete\n", drive->name); + printk(KERN_WARNING "%s: timeout waiting for ddma to complete\n", + drive->name); return 1; } udelay(10); @@ -342,22 +314,18 @@ static void auide_dma_host_set(ide_drive_t *drive, int on) static void auide_ddma_tx_callback(int irq, void *param) { - _auide_hwif *ahwif = (_auide_hwif*)param; - ahwif->drive->waiting_for_dma = 0; } static void auide_ddma_rx_callback(int irq, void *param) { - _auide_hwif *ahwif = (_auide_hwif*)param; - ahwif->drive->waiting_for_dma = 0; } - #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ -static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags) +static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, + u32 devwidth, u32 flags, u32 regbase) { dev->dev_id = dev_id; - dev->dev_physaddr = (u32)IDE_PHYS_ADDR; + dev->dev_physaddr = CPHYSADDR(regbase); dev->dev_intlevel = 0; dev->dev_intpolarity = 0; dev->dev_tsize = tsize; @@ -369,12 +337,10 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de static const struct ide_dma_ops au1xxx_dma_ops = { .dma_host_set = auide_dma_host_set, .dma_setup = auide_dma_setup, - .dma_exec_cmd = auide_dma_exec_cmd, .dma_start = auide_dma_start, .dma_end = auide_dma_end, .dma_test_irq = auide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, }; static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) @@ -383,7 +349,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; - dev_id = IDE_DDMA_REQ; + dev_id = hwif->ddma_id; tsize = 8; /* 1 */ devwidth = 32; /* 16 */ @@ -395,20 +361,17 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #endif /* setup dev_tab for tx channel */ - auide_init_dbdma_dev( &source_dev_tab, - dev_id, - tsize, devwidth, DEV_FLAGS_OUT | flags); + auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth, + DEV_FLAGS_OUT | flags, auide->regbase); auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - auide_init_dbdma_dev( &source_dev_tab, - dev_id, - tsize, devwidth, DEV_FLAGS_IN | flags); + auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth, + DEV_FLAGS_IN | flags, auide->regbase); auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); /* We also need to add a target device for the DMA */ - auide_init_dbdma_dev( &target_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - tsize, devwidth, DEV_FLAGS_ANYUSE); + auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize, + devwidth, DEV_FLAGS_ANYUSE, auide->regbase); auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); /* Get a channel for TX */ @@ -450,14 +413,12 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #endif /* setup dev_tab for tx channel */ - auide_init_dbdma_dev( &source_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - 8, 32, DEV_FLAGS_OUT | flags); + auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32, + DEV_FLAGS_OUT | flags, auide->regbase); auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - auide_init_dbdma_dev( &source_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - 8, 32, DEV_FLAGS_IN | flags); + auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32, + DEV_FLAGS_IN | flags, auide->regbase); auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); /* Get a channel for TX */ @@ -484,7 +445,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) } #endif -static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) +static void auide_setup_ports(struct ide_hw *hw, _auide_hwif *ahwif) { int i; unsigned long *ata_regs = hw->io_ports_array; @@ -502,9 +463,9 @@ static const struct ide_tp_ops au1xxx_tp_ops = { .exec_command = ide_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, - .set_irq = ide_set_irq, - + .dev_select = ide_dev_select, .tf_load = ide_tf_load, .tf_read = ide_tf_read, @@ -534,16 +495,16 @@ static const struct ide_port_info au1xxx_port_info = { #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA .mwdma_mask = ATA_MWDMA2, #endif + .chipset = ide_au1xxx, }; -static int au_ide_probe(struct device *dev) +static int au_ide_probe(struct platform_device *dev) { - struct platform_device *pdev = to_platform_device(dev); _auide_hwif *ahwif = &auide_hwif; struct resource *res; struct ide_host *host; int ret = 0; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) char *mode = "MWDMA2"; @@ -552,47 +513,53 @@ static int au_ide_probe(struct device *dev) #endif memset(&auide_hwif, 0, sizeof(_auide_hwif)); - ahwif->irq = platform_get_irq(pdev, 0); + ahwif->irq = platform_get_irq(dev, 0); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (res == NULL) { - pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id); + pr_debug("%s %d: no base address\n", DRV_NAME, dev->id); ret = -ENODEV; goto out; } if (ahwif->irq < 0) { - pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id); + pr_debug("%s %d: no IRQ\n", DRV_NAME, dev->id); ret = -ENODEV; goto out; } - if (!request_mem_region(res->start, res->end - res->start + 1, - pdev->name)) { + if (!request_mem_region(res->start, resource_size(res), dev->name)) { pr_debug("%s: request_mem_region failed\n", DRV_NAME); ret = -EBUSY; goto out; } - ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1); + ahwif->regbase = (u32)ioremap(res->start, resource_size(res)); if (ahwif->regbase == 0) { ret = -ENOMEM; goto out; } + res = platform_get_resource(dev, IORESOURCE_DMA, 0); + if (!res) { + pr_debug("%s: no DDMA ID resource\n", DRV_NAME); + ret = -ENODEV; + goto out; + } + ahwif->ddma_id = res->start; + memset(&hw, 0, sizeof(hw)); auide_setup_ports(&hw, ahwif); hw.irq = ahwif->irq; - hw.dev = dev; - hw.chipset = ide_au1xxx; + hw.dev = &dev->dev; - ret = ide_host_add(&au1xxx_port_info, hws, &host); + ret = ide_host_add(&au1xxx_port_info, hws, 1, &host); if (ret) goto out; auide_hwif.hwif = host->ports[0]; - dev_set_drvdata(dev, host); + platform_set_drvdata(dev, host); printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); @@ -600,38 +567,39 @@ static int au_ide_probe(struct device *dev) return ret; } -static int au_ide_remove(struct device *dev) +static int au_ide_remove(struct platform_device *dev) { - struct platform_device *pdev = to_platform_device(dev); struct resource *res; - struct ide_host *host = dev_get_drvdata(dev); + struct ide_host *host = platform_get_drvdata(dev); _auide_hwif *ahwif = &auide_hwif; ide_host_remove(host); iounmap((void *)ahwif->regbase); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); return 0; } -static struct device_driver au1200_ide_driver = { - .name = "au1200-ide", - .bus = &platform_bus_type, +static struct platform_driver au1200_ide_driver = { + .driver = { + .name = "au1200-ide", + .owner = THIS_MODULE, + }, .probe = au_ide_probe, .remove = au_ide_remove, }; static int __init au_ide_init(void) { - return driver_register(&au1200_ide_driver); + return platform_driver_register(&au1200_ide_driver); } static void __exit au_ide_exit(void) { - driver_unregister(&au1200_ide_driver); + platform_driver_unregister(&au1200_ide_driver); } MODULE_LICENSE("GPL"); diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c index c5a3c9ef6a5..46eaf58d881 100644 --- a/drivers/ide/buddha.c +++ b/drivers/ide/buddha.c @@ -23,6 +23,7 @@ #include <linux/zorro.h> #include <linux/ide.h> #include <linux/init.h> +#include <linux/module.h> #include <asm/amigahw.h> #include <asm/amigaints.h> @@ -99,7 +100,7 @@ static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" }; * Check and acknowledge the interrupt status */ -static int buddha_ack_intr(ide_hwif_t *hwif) +static int buddha_test_irq(ide_hwif_t *hwif) { unsigned char ch; @@ -109,21 +110,16 @@ static int buddha_ack_intr(ide_hwif_t *hwif) return 1; } -static int xsurf_ack_intr(ide_hwif_t *hwif) +static void xsurf_clear_irq(ide_drive_t *drive) { - unsigned char ch; - - ch = z_readb(hwif->io_ports.irq_addr); - /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */ - z_writeb(0, hwif->io_ports.irq_addr); - if (!(ch & 0x80)) - return 0; - return 1; + /* + * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0 + */ + z_writeb(0, drive->hwif->io_ports.irq_addr); } -static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base, - unsigned long ctl, unsigned long irq_port, - ide_ack_intr_t *ack_intr) +static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base, + unsigned long ctl, unsigned long irq_port) { int i; @@ -138,11 +134,24 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base, hw->io_ports.irq_addr = irq_port; hw->irq = IRQ_AMIGA_PORTS; - hw->ack_intr = ack_intr; - - hw->chipset = ide_generic; } +static const struct ide_port_ops buddha_port_ops = { + .test_irq = buddha_test_irq, +}; + +static const struct ide_port_ops xsurf_port_ops = { + .clear_irq = xsurf_clear_irq, + .test_irq = buddha_test_irq, +}; + +static const struct ide_port_info buddha_port_info = { + .port_ops = &buddha_port_ops, + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, + .irq_flags = IRQF_SHARED, + .chipset = ide_generic, +}; + /* * Probe for a Buddha or Catweasel IDE interface */ @@ -156,7 +165,8 @@ static int __init buddha_init(void) while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { unsigned long board; - hw_regs_t hw[MAX_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL }; + struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS]; + struct ide_port_info d = buddha_port_info; if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) { buddha_num_hwifs = BUDDHA_NUM_HWIFS; @@ -167,15 +177,12 @@ static int __init buddha_init(void) } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) { buddha_num_hwifs = XSURF_NUM_HWIFS; type=BOARD_XSURF; + d.port_ops = &xsurf_port_ops; } else continue; board = z->resource.start; -/* - * FIXME: we now have selectable mmio v/s iomio transports. - */ - if(type != BOARD_XSURF) { if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE")) continue; @@ -191,7 +198,7 @@ fail_base2: continue; } } - buddha_board = ZTWO_VADDR(board); + buddha_board = (unsigned long)ZTWO_VADDR(board); /* write to BUDDHA_IRQ_MR to enable the board IRQ */ /* X-Surf doesn't have this. IRQs are always on */ @@ -203,28 +210,24 @@ fail_base2: for (i = 0; i < buddha_num_hwifs; i++) { unsigned long base, ctl, irq_port; - ide_ack_intr_t *ack_intr; if (type != BOARD_XSURF) { base = buddha_board + buddha_bases[i]; ctl = base + BUDDHA_CONTROL; irq_port = buddha_board + buddha_irqports[i]; - ack_intr = buddha_ack_intr; } else { base = buddha_board + xsurf_bases[i]; /* X-Surf has no CS1* (Control/AltStat) */ ctl = 0; irq_port = buddha_board + xsurf_irqports[i]; - ack_intr = xsurf_ack_intr; } - buddha_setup_ports(&hw[i], base, ctl, irq_port, - ack_intr); + buddha_setup_ports(&hw[i], base, ctl, irq_port); hws[i] = &hw[i]; } - ide_host_add(NULL, hws, NULL); + ide_host_add(&d, hws, i, NULL); } return 0; diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c index 8890276fef7..70f0a2754c1 100644 --- a/drivers/ide/cmd640.c +++ b/drivers/ide/cmd640.c @@ -105,12 +105,13 @@ #include <linux/delay.h> #include <linux/ide.h> #include <linux/init.h> +#include <linux/module.h> #include <asm/io.h> #define DRV_NAME "cmd640" -static int cmd640_vlb; +static bool cmd640_vlb; /* * CMD640 specific registers definition. @@ -153,6 +154,7 @@ static int cmd640_vlb; #define ARTTIM23 0x57 #define ARTTIM23_DIS_RA2 0x04 #define ARTTIM23_DIS_RA3 0x08 +#define ARTTIM23_IDE23INTR 0x10 #define DRWTIM23 0x58 #define BRST 0x59 @@ -571,9 +573,10 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, program_drive_counts(drive, index); } -static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cmd640_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned int index = 0, cycle_time; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 b; switch (pio) { @@ -604,7 +607,7 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) } #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ -static void cmd640_init_dev(ide_drive_t *drive) +static void __init cmd640_init_dev(ide_drive_t *drive) { unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1); @@ -629,12 +632,22 @@ static void cmd640_init_dev(ide_drive_t *drive) #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ } +static int cmd640_test_irq(ide_hwif_t *hwif) +{ + int irq_reg = hwif->channel ? ARTTIM23 : CFR; + u8 irq_mask = hwif->channel ? ARTTIM23_IDE23INTR : + CFR_IDE01INTR; + u8 irq_stat = get_cmd640_reg(irq_reg); + + return (irq_stat & irq_mask) ? 1 : 0; +} static const struct ide_port_ops cmd640_port_ops = { .init_dev = cmd640_init_dev, #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED .set_pio_mode = cmd640_set_pio_mode, #endif + .test_irq = cmd640_test_irq, }; static int pci_conf1(void) @@ -672,7 +685,7 @@ static int pci_conf2(void) return 0; } -static const struct ide_port_info cmd640_port_info __initdata = { +static const struct ide_port_info cmd640_port_info __initconst = { .chipset = ide_cmd640, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA | @@ -708,7 +721,7 @@ static int __init cmd640x_init(void) int second_port_cmd640 = 0, rc; const char *bus_type, *port2; u8 b, cfr; - hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL }; + struct ide_hw hw[2], *hws[2]; if (cmd640_vlb && probe_for_cmd640_vlb()) { bus_type = "VLB"; @@ -762,11 +775,9 @@ static int __init cmd640x_init(void) ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); hw[0].irq = 14; - hw[0].chipset = ide_cmd640; ide_std_init_ports(&hw[1], 0x170, 0x376); hw[1].irq = 15; - hw[1].chipset = ide_cmd640; printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr); @@ -824,7 +835,8 @@ static int __init cmd640x_init(void) cmd640_dump_regs(); #endif - return ide_host_add(&cmd640_port_info, hws, NULL); + return ide_host_add(&cmd640_port_info, hws, second_port_cmd640 ? 2 : 1, + NULL); } module_param_named(probe_vlb, cmd640_vlb, bool, 0); diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c index 2f9688d87ec..b127ed60c73 100644 --- a/drivers/ide/cmd64x.c +++ b/drivers/ide/cmd64x.c @@ -7,7 +7,8 @@ * Copyright (C) 1998 David S. Miller (davem@redhat.com) * * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007,2009 MontaVista Software, Inc. <source@mvista.com> */ #include <linux/module.h> @@ -20,14 +21,6 @@ #define DRV_NAME "cmd64x" -#define CMD_DEBUG 0 - -#if CMD_DEBUG -#define cmdprintk(x...) printk(x) -#else -#define cmdprintk(x...) -#endif - /* * CMD64x specific registers definition. */ @@ -58,78 +51,42 @@ #define UDIDETCR1 0x7B #define DTPR1 0x7C -static u8 quantize_timing(int timing, int quant) -{ - return (timing + quant - 1) / quant; -} - -/* - * This routine calculates active/recovery counts and then writes them into - * the chipset registers. - */ -static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) +static void cmd64x_program_timings(ide_drive_t *drive, u8 mode) { + ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); - u8 cycle_count, active_count, recovery_count, drwtim; + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; + const unsigned long T = 1000000 / bus_speed; static const u8 recovery_values[] = {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; + static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; + static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; + struct ide_timing t; + u8 arttim = 0; - cmdprintk("program_cycle_times parameters: total=%d, active=%d\n", - cycle_time, active_time); - - cycle_count = quantize_timing( cycle_time, clock_time); - active_count = quantize_timing(active_time, clock_time); - recovery_count = cycle_count - active_count; + ide_timing_compute(drive, mode, &t, T, 0); /* * In case we've got too long recovery phase, try to lengthen * the active phase */ - if (recovery_count > 16) { - active_count += recovery_count - 16; - recovery_count = 16; + if (t.recover > 16) { + t.active += t.recover - 16; + t.recover = 16; } - if (active_count > 16) /* shouldn't actually happen... */ - active_count = 16; - - cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n", - cycle_count, active_count, recovery_count); + if (t.active > 16) /* shouldn't actually happen... */ + t.active = 16; /* * Convert values to internal chipset representation */ - recovery_count = recovery_values[recovery_count]; - active_count &= 0x0f; + t.recover = recovery_values[t.recover]; + t.active &= 0x0f; /* Program the active/recovery counts into the DRWTIM register */ - drwtim = (active_count << 4) | recovery_count; - (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim); - cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]); -} - -/* - * This routine writes into the chipset registers - * PIO setup/active/recovery timings. - */ -static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - unsigned int cycle_time; - u8 setup_count, arttim = 0; - - static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; - static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; - - cycle_time = ide_pio_cycle_time(drive, pio); - - program_cycle_times(drive, cycle_time, t->active); - - setup_count = quantize_timing(t->setup, - 1000 / (ide_pci_clk ? ide_pci_clk : 33)); + pci_write_config_byte(dev, drwtim_regs[drive->dn], + (t.active << 4) | t.recover); /* * The primary channel has individual address setup timing registers @@ -140,15 +97,21 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) if (hwif->channel) { ide_drive_t *pair = ide_get_pair_dev(drive); - drive->drive_data = setup_count; + if (pair) { + struct ide_timing tp; - if (pair) - setup_count = max_t(u8, setup_count, pair->drive_data); + ide_timing_compute(pair, pair->pio_mode, &tp, T, 0); + ide_timing_merge(&t, &tp, &t, IDE_TIMING_SETUP); + if (pair->dma_mode) { + ide_timing_compute(pair, pair->dma_mode, + &tp, T, 0); + ide_timing_merge(&tp, &t, &t, IDE_TIMING_SETUP); + } + } } - if (setup_count > 5) /* shouldn't actually happen... */ - setup_count = 5; - cmdprintk("Final address setup count: %d\n", setup_count); + if (t.setup > 5) /* shouldn't actually happen... */ + t.setup = 5; /* * Program the address setup clocks into the ARTTIM registers. @@ -158,9 +121,8 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) if (hwif->channel) arttim &= ~ARTTIM23_INTR_CH1; arttim &= ~0xc0; - arttim |= setup_values[setup_count]; + arttim |= setup_values[t.setup]; (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); - cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]); } /* @@ -168,8 +130,10 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) * Special cases are 8: prefetch off, 9: prefetch on (both never worked) */ -static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cmd64x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { + const u8 pio = drive->pio_mode - XFER_PIO_0; + /* * Filter out the prefetch control values * to prevent PIO5 from being programmed @@ -177,20 +141,18 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) if (pio == 8 || pio == 9) return; - cmd64x_tune_pio(drive, pio); + cmd64x_program_timings(drive, XFER_PIO_0 + pio); } -static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void cmd64x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 unit = drive->dn & 0x01; u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; + const u8 speed = drive->dma_mode; - if (speed >= XFER_SW_DMA_0) { - (void) pci_read_config_byte(dev, pciU, ®U); - regU &= ~(unit ? 0xCA : 0x35); - } + pci_read_config_byte(dev, pciU, ®U); + regU &= ~(unit ? 0xCA : 0x35); switch(speed) { case XFER_UDMA_5: @@ -212,25 +174,20 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) regU |= unit ? 0xC2 : 0x31; break; case XFER_MW_DMA_2: - program_cycle_times(drive, 120, 70); - break; case XFER_MW_DMA_1: - program_cycle_times(drive, 150, 80); - break; case XFER_MW_DMA_0: - program_cycle_times(drive, 480, 215); + cmd64x_program_timings(drive, speed); break; } - if (speed >= XFER_SW_DMA_0) - (void) pci_write_config_byte(dev, pciU, regU); + pci_write_config_byte(dev, pciU, regU); } -static int cmd648_dma_end(ide_drive_t *drive) +static void cmd648_clear_irq(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - unsigned long base = hwif->dma_base - (hwif->channel * 8); - int err = ide_dma_end(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long base = pci_resource_start(dev, 4); u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0; u8 mrdmode = inb(base + 1); @@ -238,11 +195,9 @@ static int cmd648_dma_end(ide_drive_t *drive) /* clear the interrupt bit */ outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask, base + 1); - - return err; } -static int cmd64x_dma_end(ide_drive_t *drive) +static void cmd64x_clear_irq(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -250,62 +205,40 @@ static int cmd64x_dma_end(ide_drive_t *drive) u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; u8 irq_stat = 0; - int err = ide_dma_end(drive); (void) pci_read_config_byte(dev, irq_reg, &irq_stat); /* clear the interrupt bit */ (void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask); - - return err; } -static int cmd648_dma_test_irq(ide_drive_t *drive) +static int cmd648_test_irq(ide_hwif_t *hwif) { - ide_hwif_t *hwif = drive->hwif; - unsigned long base = hwif->dma_base - (hwif->channel * 8); + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long base = pci_resource_start(dev, 4); u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0; - u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); u8 mrdmode = inb(base + 1); -#ifdef DEBUG - printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n", - drive->name, dma_stat, mrdmode, irq_mask); -#endif - if (!(mrdmode & irq_mask)) - return 0; - - /* return 1 if INTR asserted */ - if (dma_stat & 4) - return 1; + pr_debug("%s: mrdmode: 0x%02x irq_mask: 0x%02x\n", + hwif->name, mrdmode, irq_mask); - return 0; + return (mrdmode & irq_mask) ? 1 : 0; } -static int cmd64x_dma_test_irq(ide_drive_t *drive) +static int cmd64x_test_irq(ide_hwif_t *hwif) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int irq_reg = hwif->channel ? ARTTIM23 : CFR; u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; - u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); u8 irq_stat = 0; (void) pci_read_config_byte(dev, irq_reg, &irq_stat); -#ifdef DEBUG - printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n", - drive->name, dma_stat, irq_stat, irq_mask); -#endif - if (!(irq_stat & irq_mask)) - return 0; + pr_debug("%s: irq_stat: 0x%02x irq_mask: 0x%02x\n", + hwif->name, irq_stat, irq_mask); - /* return 1 if INTR asserted */ - if (dma_stat & 4) - return 1; - - return 0; + return (irq_stat & irq_mask) ? 1 : 0; } /* @@ -318,7 +251,6 @@ static int cmd646_1_dma_end(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; u8 dma_stat = 0, dma_cmd = 0; - drive->waiting_for_dma = 0; /* get DMA status */ dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); /* read DMA command state */ @@ -327,13 +259,11 @@ static int cmd646_1_dma_end(ide_drive_t *drive) outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); /* clear the INTR & ERROR bits */ outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS); - /* and free any DMA resources */ - ide_destroy_dmatable(drive); /* verify good DMA status */ return (dma_stat & 7) != 4; } -static unsigned int init_chipset_cmd64x(struct pci_dev *dev) +static int init_chipset_cmd64x(struct pci_dev *dev) { u8 mrdmode = 0; @@ -373,54 +303,39 @@ static u8 cmd64x_cable_detect(ide_hwif_t *hwif) static const struct ide_port_ops cmd64x_port_ops = { .set_pio_mode = cmd64x_set_pio_mode, .set_dma_mode = cmd64x_set_dma_mode, + .clear_irq = cmd64x_clear_irq, + .test_irq = cmd64x_test_irq, .cable_detect = cmd64x_cable_detect, }; -static const struct ide_dma_ops cmd64x_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = cmd64x_dma_end, - .dma_test_irq = cmd64x_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, - .dma_sff_read_status = ide_dma_sff_read_status, +static const struct ide_port_ops cmd648_port_ops = { + .set_pio_mode = cmd64x_set_pio_mode, + .set_dma_mode = cmd64x_set_dma_mode, + .clear_irq = cmd648_clear_irq, + .test_irq = cmd648_test_irq, + .cable_detect = cmd64x_cable_detect, }; static const struct ide_dma_ops cmd646_rev1_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, .dma_end = cmd646_1_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_dma_ops cmd648_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = cmd648_dma_end, - .dma_test_irq = cmd648_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, - .dma_sff_read_status = ide_dma_sff_read_status, -}; - -static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { +static const struct ide_port_info cmd64x_chipsets[] = { { /* 0: CMD643 */ .name = DRV_NAME, .init_chipset = init_chipset_cmd64x, .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, .port_ops = &cmd64x_port_ops, - .dma_ops = &cmd64x_dma_ops, .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | - IDE_HFLAG_ABUSE_PREFETCH, + IDE_HFLAG_ABUSE_PREFETCH | + IDE_HFLAG_SERIALIZE, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = 0x00, /* no udma */ @@ -429,10 +344,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .port_ops = &cmd64x_port_ops, - .dma_ops = &cmd648_dma_ops, - .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_ABUSE_PREFETCH, + .port_ops = &cmd648_port_ops, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH | + IDE_HFLAG_SERIALIZE, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, @@ -441,8 +355,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .port_ops = &cmd64x_port_ops, - .dma_ops = &cmd648_dma_ops, + .port_ops = &cmd648_port_ops, .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, @@ -452,8 +365,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .port_ops = &cmd64x_port_ops, - .dma_ops = &cmd648_dma_ops, + .port_ops = &cmd648_port_ops, .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, @@ -461,7 +373,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { } }; -static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d; u8 idx = id->driver_data; @@ -490,10 +402,9 @@ static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_devic */ if (dev->revision < 3) { d.enablebits[0].reg = 0; + d.port_ops = &cmd64x_port_ops; if (dev->revision == 1) d.dma_ops = &cmd646_rev1_dma_ops; - else - d.dma_ops = &cmd64x_dma_ops; } } } @@ -532,6 +443,6 @@ static void __exit cmd64x_ide_exit(void) module_init(cmd64x_ide_init); module_exit(cmd64x_ide_exit); -MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick"); +MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c index d003bec56ff..6250aee3050 100644 --- a/drivers/ide/cs5520.c +++ b/drivers/ide/cs5520.c @@ -57,11 +57,11 @@ static struct pio_clocks cs5520_pio_clocks[]={ {1, 2, 1} }; -static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *pdev = to_pci_dev(hwif->dev); int controller = drive->dn > 1 ? 1 : 0; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* 8bit CAT/CRT - 8bit command timing for channel */ pci_write_config_byte(pdev, 0x62 + controller, @@ -81,11 +81,12 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) (cs5520_pio_clocks[pio].assert)); } -static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { printk(KERN_ERR "cs55x0: bad ide timing.\n"); - cs5520_set_pio_mode(drive, 0); + drive->pio_mode = XFER_PIO_0 + 0; + cs5520_set_pio_mode(hwif, drive); } static const struct ide_port_ops cs5520_port_ops = { @@ -93,7 +94,7 @@ static const struct ide_port_ops cs5520_port_ops = { .set_dma_mode = cs5520_set_dma_mode, }; -static const struct ide_port_info cyrix_chipset __devinitdata = { +static const struct ide_port_info cyrix_chipset = { .name = DRV_NAME, .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } }, .port_ops = &cs5520_port_ops, @@ -107,10 +108,10 @@ static const struct ide_port_info cyrix_chipset __devinitdata = { * work longhand. */ -static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &cyrix_chipset; - hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; + struct ide_hw hw[2], *hws[] = { NULL, NULL }; ide_setup_pci_noise(dev, d); @@ -122,7 +123,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic return -ENODEV; } pci_set_master(dev); - if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { + if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) { printk(KERN_WARNING "%s: No suitable DMA available.\n", d->name); return -ENODEV; @@ -133,9 +134,11 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic * do all the device setup for us */ - ide_pci_setup_ports(dev, d, 14, &hw[0], &hws[0]); + ide_pci_setup_ports(dev, d, &hw[0], &hws[0]); + hw[0].irq = 14; + hw[1].irq = 15; - return ide_host_add(d, hws, NULL); + return ide_host_add(d, hws, 2, NULL); } static const struct pci_device_id cs5520_pci_tbl[] = { diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c index d8ede85fe17..65371599b97 100644 --- a/drivers/ide/cs5530.c +++ b/drivers/ide/cs5530.c @@ -41,8 +41,8 @@ static unsigned int cs5530_pio_timings[2][5] = { /** * cs5530_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Handles setting of PIO mode for the chipset. * @@ -50,10 +50,11 @@ static unsigned int cs5530_pio_timings[2][5] = { * will have valid default PIO timings set up before we get here. */ -static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cs5530_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - unsigned long basereg = CS5530_BASEREG(drive->hwif); + unsigned long basereg = CS5530_BASEREG(hwif); unsigned int format = (inl(basereg + 4) >> 31) & 1; + const u8 pio = drive->pio_mode - XFER_PIO_0; outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); } @@ -92,20 +93,19 @@ static u8 cs5530_udma_filter(ide_drive_t *drive) if ((mateid[ATA_ID_FIELD_VALID] & 4) && (mateid[ATA_ID_UDMA_MODES] & 7)) goto out; - if ((mateid[ATA_ID_FIELD_VALID] & 2) && - (mateid[ATA_ID_MWDMA_MODES] & 7)) + if (mateid[ATA_ID_MWDMA_MODES] & 7) mask = 0; } out: return mask; } -static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void cs5530_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned long basereg; unsigned int reg, timings = 0; - switch (mode) { + switch (drive->dma_mode) { case XFER_UDMA_0: timings = 0x00921250; break; case XFER_UDMA_1: timings = 0x00911140; break; case XFER_UDMA_2: timings = 0x00911030; break; @@ -113,7 +113,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) case XFER_MW_DMA_1: timings = 0x00012121; break; case XFER_MW_DMA_2: timings = 0x00002020; break; } - basereg = CS5530_BASEREG(drive->hwif); + basereg = CS5530_BASEREG(hwif); reg = inl(basereg + 4); /* get drive0 config register */ timings |= reg & 0x80000000; /* preserve PIO format bit */ if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ @@ -135,7 +135,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) * Initialize the cs5530 bridge for reliable IDE DMA operation. */ -static unsigned int init_chipset_cs5530(struct pci_dev *dev) +static int init_chipset_cs5530(struct pci_dev *dev) { struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; @@ -226,7 +226,7 @@ out: * performs channel-specific pre-initialization before drive probing. */ -static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) +static void init_hwif_cs5530 (ide_hwif_t *hwif) { unsigned long basereg; u32 d0_timings; @@ -245,7 +245,7 @@ static const struct ide_port_ops cs5530_port_ops = { .udma_filter = cs5530_udma_filter, }; -static const struct ide_port_info cs5530_chipset __devinitdata = { +static const struct ide_port_info cs5530_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_cs5530, .init_hwif = init_hwif_cs5530, @@ -257,7 +257,7 @@ static const struct ide_port_info cs5530_chipset __devinitdata = { .udma_mask = ATA_UDMA2, }; -static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &cs5530_chipset, NULL); } diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c index 983d957a018..3bc5b9a3401 100644 --- a/drivers/ide/cs5535.c +++ b/drivers/ide/cs5535.c @@ -86,7 +86,7 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) cmd = pioa = speed - XFER_PIO_0; if (pair) { - u8 piob = ide_get_best_pio_mode(pair, 255, 4); + u8 piob = pair->pio_mode - XFER_PIO_0; if (piob < cmd) cmd = piob; @@ -129,28 +129,28 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) /** * cs5535_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Programs the chipset for DMA mode. */ -static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - cs5535_set_speed(drive, speed); + cs5535_set_speed(drive, drive->dma_mode); } /** * cs5535_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * A callback from the upper layers for PIO-only tuning. */ -static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - cs5535_set_speed(drive, XFER_PIO_0 + pio); + cs5535_set_speed(drive, drive->pio_mode); } static u8 cs5535_cable_detect(ide_hwif_t *hwif) @@ -170,7 +170,7 @@ static const struct ide_port_ops cs5535_port_ops = { .cable_detect = cs5535_cable_detect, }; -static const struct ide_port_info cs5535_chipset __devinitdata = { +static const struct ide_port_info cs5535_chipset = { .name = DRV_NAME, .port_ops = &cs5535_port_ops, .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE, @@ -179,14 +179,14 @@ static const struct ide_port_info cs5535_chipset __devinitdata = { .udma_mask = ATA_UDMA4, }; -static int __devinit cs5535_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &cs5535_chipset, NULL); } static const struct pci_device_id cs5535_pci_tbl[] = { { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), }, { 0, }, }; diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c new file mode 100644 index 00000000000..de9185db41d --- /dev/null +++ b/drivers/ide/cs5536.c @@ -0,0 +1,306 @@ +/* + * CS5536 PATA support + * (C) 2007 Martin K. Petersen <mkp@mkp.net> + * (C) 2009 Bartlomiej Zolnierkiewicz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Documentation: + * Available from AMD web site. + * + * The IDE timing registers for the CS5536 live in the Geode Machine + * Specific Register file and not PCI config space. Most BIOSes + * virtualize the PCI registers so the chip looks like a standard IDE + * controller. Unfortunately not all implementations get this right. + * In particular some have problems with unaligned accesses to the + * virtualized PCI registers. This driver always does full dword + * writes to work around the issue. Also, in case of a bad BIOS this + * driver can be loaded with the "msr=1" parameter which forces using + * the Machine Specific Registers to configure the device. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> +#include <asm/msr.h> + +#define DRV_NAME "cs5536" + +enum { + MSR_IDE_CFG = 0x51300010, + PCI_IDE_CFG = 0x40, + + CFG = 0, + DTC = 2, + CAST = 3, + ETC = 4, + + IDE_CFG_CHANEN = (1 << 1), + IDE_CFG_CABLE = (1 << 17) | (1 << 16), + + IDE_D0_SHIFT = 24, + IDE_D1_SHIFT = 16, + IDE_DRV_MASK = 0xff, + + IDE_CAST_D0_SHIFT = 6, + IDE_CAST_D1_SHIFT = 4, + IDE_CAST_DRV_MASK = 0x3, + + IDE_CAST_CMD_SHIFT = 24, + IDE_CAST_CMD_MASK = 0xff, + + IDE_ETC_UDMA_MASK = 0xc0, +}; + +static int use_msr; + +static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val) +{ + if (unlikely(use_msr)) { + u32 dummy; + + rdmsr(MSR_IDE_CFG + reg, *val, dummy); + return 0; + } + + return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static int cs5536_write(struct pci_dev *pdev, int reg, int val) +{ + if (unlikely(use_msr)) { + wrmsr(MSR_IDE_CFG + reg, val, 0); + return 0; + } + + return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static void cs5536_program_dtc(ide_drive_t *drive, u8 tim) +{ + struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); + int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; + u32 dtc; + + cs5536_read(pdev, DTC, &dtc); + dtc &= ~(IDE_DRV_MASK << dshift); + dtc |= tim << dshift; + cs5536_write(pdev, DTC, dtc); +} + +/** + * cs5536_cable_detect - detect cable type + * @hwif: Port to detect on + * + * Perform cable detection for ATA66 capable cable. + * + * Returns a cable type. + */ + +static u8 cs5536_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *pdev = to_pci_dev(hwif->dev); + u32 cfg; + + cs5536_read(pdev, CFG, &cfg); + + if (cfg & IDE_CFG_CABLE) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * cs5536_set_pio_mode - PIO timing setup + * @hwif: ATA port + * @drive: ATA device + */ + +static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) +{ + static const u8 drv_timings[5] = { + 0x98, 0x55, 0x32, 0x21, 0x20, + }; + + static const u8 addr_timings[5] = { + 0x2, 0x1, 0x0, 0x0, 0x0, + }; + + static const u8 cmd_timings[5] = { + 0x99, 0x92, 0x90, 0x22, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(hwif->dev); + ide_drive_t *pair = ide_get_pair_dev(drive); + int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; + unsigned long timings = (unsigned long)ide_get_drivedata(drive); + u32 cast; + const u8 pio = drive->pio_mode - XFER_PIO_0; + u8 cmd_pio = pio; + + if (pair) + cmd_pio = min_t(u8, pio, pair->pio_mode - XFER_PIO_0); + + timings &= (IDE_DRV_MASK << 8); + timings |= drv_timings[pio]; + ide_set_drivedata(drive, (void *)timings); + + cs5536_program_dtc(drive, drv_timings[pio]); + + cs5536_read(pdev, CAST, &cast); + + cast &= ~(IDE_CAST_DRV_MASK << cshift); + cast |= addr_timings[pio] << cshift; + + cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT); + cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT; + + cs5536_write(pdev, CAST, cast); +} + +/** + * cs5536_set_dma_mode - DMA timing setup + * @hwif: ATA port + * @drive: ATA device + */ + +static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) +{ + static const u8 udma_timings[6] = { + 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, + }; + + static const u8 mwdma_timings[3] = { + 0x67, 0x21, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(hwif->dev); + int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; + unsigned long timings = (unsigned long)ide_get_drivedata(drive); + u32 etc; + const u8 mode = drive->dma_mode; + + cs5536_read(pdev, ETC, &etc); + + if (mode >= XFER_UDMA_0) { + etc &= ~(IDE_DRV_MASK << dshift); + etc |= udma_timings[mode - XFER_UDMA_0] << dshift; + } else { /* MWDMA */ + etc &= ~(IDE_ETC_UDMA_MASK << dshift); + timings &= IDE_DRV_MASK; + timings |= mwdma_timings[mode - XFER_MW_DMA_0] << 8; + ide_set_drivedata(drive, (void *)timings); + } + + cs5536_write(pdev, ETC, etc); +} + +static void cs5536_dma_start(ide_drive_t *drive) +{ + unsigned long timings = (unsigned long)ide_get_drivedata(drive); + + if (drive->current_speed < XFER_UDMA_0 && + (timings >> 8) != (timings & IDE_DRV_MASK)) + cs5536_program_dtc(drive, timings >> 8); + + ide_dma_start(drive); +} + +static int cs5536_dma_end(ide_drive_t *drive) +{ + int ret = ide_dma_end(drive); + unsigned long timings = (unsigned long)ide_get_drivedata(drive); + + if (drive->current_speed < XFER_UDMA_0 && + (timings >> 8) != (timings & IDE_DRV_MASK)) + cs5536_program_dtc(drive, timings & IDE_DRV_MASK); + + return ret; +} + +static const struct ide_port_ops cs5536_port_ops = { + .set_pio_mode = cs5536_set_pio_mode, + .set_dma_mode = cs5536_set_dma_mode, + .cable_detect = cs5536_cable_detect, +}; + +static const struct ide_dma_ops cs5536_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_start = cs5536_dma_start, + .dma_end = cs5536_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timer_expiry = ide_dma_sff_timer_expiry, + .dma_sff_read_status = ide_dma_sff_read_status, +}; + +static const struct ide_port_info cs5536_info = { + .name = DRV_NAME, + .port_ops = &cs5536_port_ops, + .dma_ops = &cs5536_dma_ops, + .host_flags = IDE_HFLAG_SINGLE, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, +}; + +/** + * cs5536_init_one + * @dev: PCI device + * @id: Entry in match table + */ + +static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + u32 cfg; + + if (use_msr) + printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n"); + + cs5536_read(dev, CFG, &cfg); + + if ((cfg & IDE_CFG_CHANEN) == 0) { + printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); + return -ENODEV; + } + + return ide_pci_init_one(dev, &cs5536_info, NULL); +} + +static const struct pci_device_id cs5536_pci_tbl[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), }, + { }, +}; + +static struct pci_driver cs5536_pci_driver = { + .name = DRV_NAME, + .id_table = cs5536_pci_tbl, + .probe = cs5536_init_one, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +module_pci_driver(cs5536_pci_driver); + +MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz"); +MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl); + +module_param_named(msr, use_msr, int, 0644); +MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index 74fc5401f40..f5820079a28 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c @@ -1,43 +1,11 @@ /* * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator + * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz * * CYPRESS CY82C693 chipset IDE controller * * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. - * Writing the driver was quite simple, since most of the job is - * done by the generic pci-ide support. - * The hard part was finding the CY82C693's datasheet on Cypress's - * web page :-(. But Altavista solved this problem :-). - * - * - * Notes: - * - I recently got a 16.8G IBM DTTA, so I was able to test it with - * a large and fast disk - the results look great, so I'd say the - * driver is working fine :-) - * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA - * - this is my first linux driver, so there's probably a lot of room - * for optimizations and bug fixing, so feel free to do it. - * - if using PIO mode it's a good idea to set the PIO mode and - * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda - * - I had some problems with my IBM DHEA with PIO modes < 2 - * (lost interrupts) ????? - * - first tests with DMA look okay, they seem to work, but there is a - * problem with sound - the BusMaster IDE TimeOut should fixed this - * - * Ancient History: - * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693 - * ASK@1999-01-23: v0.33 made a few minor code clean ups - * removed DMA clock speed setting by default - * added boot message - * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut - * added support to set DMA Controller Clock Speed - * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes - * on some drives. - * ASK@1998-10-29: v0.3 added support to set DMA modes - * ASK@1998-10-28: v0.2 added support to set PIO modes - * ASK@1998-10-27: v0.1 first version - chipset detection - * */ #include <linux/module.h> @@ -51,11 +19,6 @@ #define DRV_NAME "cy82c693" /* - * The following are used to debug the driver. - */ -#define CY82C693_DEBUG_INFO 0 - -/* * NOTE: the value for busmaster timeout is tricky and I got it by * trial and error! By using a to low value will cause DMA timeouts * and drop IDE performance, and by using a to high value will cause @@ -86,87 +49,13 @@ #define CY82_INDEX_CHANNEL1 0x31 #define CY82_INDEX_TIMEOUT 0x32 -/* the min and max PCI bus speed in MHz - from datasheet */ -#define CY82C963_MIN_BUS_SPEED 25 -#define CY82C963_MAX_BUS_SPEED 33 - -/* the struct for the PIO mode timings */ -typedef struct pio_clocks_s { - u8 address_time; /* Address setup (clocks) */ - u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */ - u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */ - u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */ -} pio_clocks_t; - -/* - * calc clocks using bus_speed - * returns (rounded up) time in bus clocks for time in ns - */ -static int calc_clk(int time, int bus_speed) -{ - int clocks; - - clocks = (time*bus_speed+999)/1000 - 1; - - if (clocks < 0) - clocks = 0; - - if (clocks > 0x0F) - clocks = 0x0F; - - return clocks; -} - -/* - * compute the values for the clock registers for PIO - * mode and pci_clk [MHz] speed - * - * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used - * for mode 3 and 4 drives 8 and 16-bit timings are the same - * - */ -static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) -{ - struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); - int clk1, clk2; - int bus_speed = ide_pci_clk ? ide_pci_clk : 33; - - /* we don't check against CY82C693's min and max speed, - * so you can play with the idebus=xx parameter - */ - - /* let's calc the address setup time clocks */ - p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed); - - /* let's calc the active and recovery time clocks */ - clk1 = calc_clk(t->active, bus_speed); - - /* calc recovery timing */ - clk2 = t->cycle - t->active - t->setup; - - clk2 = calc_clk(clk2, bus_speed); - - clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */ - - /* note: we use the same values for 16bit IOR and IOW - * those are all the same, since I don't have other - * timings than those from ide-lib.c - */ - - p_pclk->time_16r = (u8)clk1; - p_pclk->time_16w = (u8)clk1; - - /* what are good values for 8bit ?? */ - p_pclk->time_8 = (u8)clk1; -} - /* * set DMA mode a specific channel for CY82C693 */ -static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + const u8 mode = drive->dma_mode; u8 single = (mode & 0x10) >> 4, index = 0, data = 0; index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; @@ -176,14 +65,9 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) outb(index, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); -#if CY82C693_DEBUG_INFO - printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n", - drive->name, hwif->channel, drive->dn & 1, mode & 3, single); -#endif /* CY82C693_DEBUG_INFO */ - /* * note: below we set the value for Bus Master IDE TimeOut Register - * I'm not absolutly sure what this does, but it solved my problem + * I'm not absolutely sure what this does, but it solved my problem * with IDE DMA and sound, so I now can play sound and work with * my IDE driver at the same time :-) * @@ -194,22 +78,19 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) data = BUSMASTER_TIMEOUT; outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); - -#if CY82C693_DEBUG_INFO - printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", - drive->name, data); -#endif /* CY82C693_DEBUG_INFO */ } -static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); - pio_clocks_t pclk; + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; + const unsigned long T = 1000000 / bus_speed; unsigned int addrCtrl; + struct ide_timing t; + u8 time_16, time_8; /* select primary or secondary channel */ - if (hwif->index > 0) { /* drive is on the secondary channel */ + if (drive->dn > 1) { /* drive is on the secondary channel */ dev = pci_get_slot(dev->bus, dev->devfn+1); if (!dev) { printk(KERN_ERR "%s: tune_drive: " @@ -219,8 +100,12 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) } } - /* let's calc the values for this PIO mode */ - compute_clocks(pio, &pclk); + ide_timing_compute(drive, drive->pio_mode, &t, T, 1); + + time_16 = clamp_val(t.recover - 1, 0, 15) | + (clamp_val(t.active - 1, 0, 15) << 4); + time_8 = clamp_val(t.act8b - 1, 0, 15) | + (clamp_val(t.rec8b - 1, 0, 15) << 4); /* now let's write the clocks registers */ if ((drive->dn & 1) == 0) { @@ -232,15 +117,13 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= (~0xF); - addrCtrl |= (unsigned int)pclk.address_time; + addrCtrl |= clamp_val(t.setup - 1, 0, 15); pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); /* now let's set the remaining registers */ - pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); - pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); - pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); - - addrCtrl &= 0xF; + pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16); + pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16); + pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8); } else { /* * set slave drive @@ -250,27 +133,19 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= (~0xF0); - addrCtrl |= ((unsigned int)pclk.address_time<<4); + addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4); pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); /* now let's set the remaining registers */ - pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r); - pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w); - pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8); - - addrCtrl >>= 4; - addrCtrl &= 0xF; + pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16); + pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16); + pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8); } - -#if CY82C693_DEBUG_INFO - printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to " - "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n", - drive->name, hwif->channel, drive->dn & 1, - addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8); -#endif /* CY82C693_DEBUG_INFO */ + if (drive->dn > 1) + pci_dev_put(dev); } -static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) +static void init_iops_cy82c693(ide_hwif_t *hwif) { static ide_hwif_t *primary; struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -288,7 +163,7 @@ static const struct ide_port_ops cy82c693_port_ops = { .set_dma_mode = cy82c693_set_dma_mode, }; -static const struct ide_port_info cy82c693_chipset __devinitdata = { +static const struct ide_port_info cy82c693_chipset = { .name = DRV_NAME, .init_iops = init_iops_cy82c693, .port_ops = &cy82c693_port_ops, @@ -298,7 +173,8 @@ static const struct ide_port_info cy82c693_chipset __devinitdata = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int cy82c693_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { struct pci_dev *dev2; int ret = -ENODEV; @@ -315,7 +191,7 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev return ret; } -static void __devexit cy82c693_remove(struct pci_dev *dev) +static void cy82c693_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; @@ -334,7 +210,7 @@ static struct pci_driver cy82c693_pci_driver = { .name = "Cypress_IDE", .id_table = cy82c693_pci_tbl, .probe = cy82c693_init_one, - .remove = __devexit_p(cy82c693_remove), + .remove = cy82c693_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; @@ -352,6 +228,6 @@ static void __exit cy82c693_ide_exit(void) module_init(cy82c693_ide_init); module_exit(cy82c693_ide_exit); -MODULE_AUTHOR("Andreas Krebs, Andre Hedrick"); +MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/delkin_cb.c b/drivers/ide/delkin_cb.c index 8f1b2d9f051..300daabaa57 100644 --- a/drivers/ide/delkin_cb.c +++ b/drivers/ide/delkin_cb.c @@ -46,7 +46,7 @@ static const struct ide_port_ops delkin_cb_port_ops = { .quirkproc = ide_undecoded_slave, }; -static unsigned int delkin_cb_init_chipset(struct pci_dev *dev) +static int delkin_cb_init_chipset(struct pci_dev *dev) { unsigned long base = pci_resource_start(dev, 0); int i; @@ -66,16 +66,17 @@ static const struct ide_port_info delkin_cb_port_info = { .port_ops = &delkin_cb_port_ops, .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | IDE_HFLAG_NO_DMA, + .irq_flags = IRQF_SHARED, .init_chipset = delkin_cb_init_chipset, + .chipset = ide_pci, }; -static int __devinit -delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) +static int delkin_cb_probe(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_host *host; unsigned long base; int rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; rc = pci_enable_device(dev); if (rc) { @@ -96,9 +97,8 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_std_init_ports(&hw, base + 0x10, base + 0x1e); hw.irq = dev->irq; hw.dev = &dev->dev; - hw.chipset = ide_pci; /* this enables IRQ sharing */ - rc = ide_host_add(&delkin_cb_port_info, hws, &host); + rc = ide_host_add(&delkin_cb_port_info, hws, 1, &host); if (rc) goto out_disable; @@ -157,7 +157,7 @@ static int delkin_cb_resume(struct pci_dev *dev) #define delkin_cb_resume NULL #endif -static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = { +static struct pci_device_id delkin_cb_pci_tbl[] = { { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 0, }, @@ -173,18 +173,7 @@ static struct pci_driver delkin_cb_pci_driver = { .resume = delkin_cb_resume, }; -static int __init delkin_cb_init(void) -{ - return pci_register_driver(&delkin_cb_pci_driver); -} - -static void __exit delkin_cb_exit(void) -{ - pci_unregister_driver(&delkin_cb_pci_driver); -} - -module_init(delkin_cb_init); -module_exit(delkin_cb_exit); +module_pci_driver(delkin_cb_pci_driver); MODULE_AUTHOR("Mark Lord"); MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE"); diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c index 689b2e49341..8722df329cb 100644 --- a/drivers/ide/dtc2278.c +++ b/drivers/ide/dtc2278.c @@ -68,11 +68,11 @@ static void sub22 (char b, char c) static DEFINE_SPINLOCK(dtc2278_lock); -static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void dtc2278_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned long flags; - if (pio >= 3) { + if (drive->pio_mode >= XFER_PIO_3) { spin_lock_irqsave(&dtc2278_lock, flags); /* * This enables PIO mode4 (3?) on the first interface @@ -91,7 +91,7 @@ static const struct ide_port_ops dtc2278_port_ops = { .set_pio_mode = dtc2278_set_pio_mode, }; -static const struct ide_port_info dtc2278_port_info __initdata = { +static const struct ide_port_info dtc2278_port_info __initconst = { .name = DRV_NAME, .chipset = ide_dtc2278, .port_ops = &dtc2278_port_ops, @@ -100,7 +100,8 @@ static const struct ide_port_info dtc2278_port_info __initdata = { IDE_HFLAG_IO_32BIT | /* disallow ->io_32bit changes */ IDE_HFLAG_NO_IO_32BIT | - IDE_HFLAG_NO_DMA, + IDE_HFLAG_NO_DMA | + IDE_HFLAG_DTC2278, .pio_mask = ATA_PIO4, }; @@ -129,7 +130,7 @@ static int __init dtc2278_probe(void) return ide_legacy_device_add(&dtc2278_port_info, 0); } -static int probe_dtc2278; +static bool probe_dtc2278; module_param_named(probe, probe_dtc2278, bool, 0); MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets"); diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c index a5ba820d69b..a5a07ccb81a 100644 --- a/drivers/ide/falconide.c +++ b/drivers/ide/falconide.c @@ -20,6 +20,7 @@ #include <asm/atarihw.h> #include <asm/atariints.h> #include <asm/atari_stdma.h> +#include <asm/ide.h> #define DRV_NAME "falconide" @@ -40,29 +41,52 @@ * which is shared between several drivers. */ -int falconide_intr_lock; -EXPORT_SYMBOL(falconide_intr_lock); +static int falconide_intr_lock; -static void falconide_input_data(ide_drive_t *drive, struct request *rq, +static void falconide_release_lock(void) +{ + if (falconide_intr_lock == 0) { + printk(KERN_ERR "%s: bug\n", __func__); + return; + } + falconide_intr_lock = 0; + stdma_release(); +} + +static void falconide_get_lock(irq_handler_t handler, void *data) +{ + if (falconide_intr_lock == 0) { + if (in_interrupt() > 0) + panic("Falcon IDE hasn't ST-DMA lock in interrupt"); + stdma_lock(handler, data); + falconide_intr_lock = 1; + } +} + +static void falconide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long data_addr = drive->hwif->io_ports.data_addr; - if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS) - return insw(data_addr, buf, (len + 1) / 2); + if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { + __ide_mm_insw(data_addr, buf, (len + 1) / 2); + return; + } - insw_swapw(data_addr, buf, (len + 1) / 2); + raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } -static void falconide_output_data(ide_drive_t *drive, struct request *rq, +static void falconide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long data_addr = drive->hwif->io_ports.data_addr; - if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS) - return outsw(data_addr, buf, (len + 1) / 2); + if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { + __ide_mm_outsw(data_addr, buf, (len + 1) / 2); + return; + } - outsw_swapw(data_addr, buf, (len + 1) / 2); + raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } /* Atari has a byte-swapped IDE interface */ @@ -70,9 +94,9 @@ static const struct ide_tp_ops falconide_tp_ops = { .exec_command = ide_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, - .set_irq = ide_set_irq, - + .dev_select = ide_dev_select, .tf_load = ide_tf_load, .tf_read = ide_tf_read, @@ -81,11 +105,16 @@ static const struct ide_tp_ops falconide_tp_ops = { }; static const struct ide_port_info falconide_port_info = { + .get_lock = falconide_get_lock, + .release_lock = falconide_release_lock, .tp_ops = &falconide_tp_ops, - .host_flags = IDE_HFLAG_NO_DMA, + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE | + IDE_HFLAG_NO_DMA, + .irq_flags = IRQF_SHARED, + .chipset = ide_generic, }; -static void __init falconide_setup_ports(hw_regs_t *hw) +static void __init falconide_setup_ports(struct ide_hw *hw) { int i; @@ -99,9 +128,6 @@ static void __init falconide_setup_ports(hw_regs_t *hw) hw->io_ports.ctl_addr = ATA_HD_BASE + ATA_HD_CONTROL; hw->irq = IRQ_MFP_IDE; - hw->ack_intr = NULL; - - hw->chipset = ide_generic; } /* @@ -111,7 +137,7 @@ static void __init falconide_setup_ports(hw_regs_t *hw) static int __init falconide_init(void) { struct ide_host *host; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; int rc; if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE)) @@ -126,15 +152,15 @@ static int __init falconide_init(void) falconide_setup_ports(&hw); - host = ide_host_alloc(&falconide_port_info, hws); + host = ide_host_alloc(&falconide_port_info, hws, 1); if (host == NULL) { rc = -ENOMEM; goto err; } - ide_get_lock(NULL, NULL); + falconide_get_lock(NULL, NULL); rc = ide_host_register(host, &falconide_port_info, hws); - ide_release_lock(); + falconide_release_lock(); if (rc) goto err_free; diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c index 59bd0be9dcb..97a2f9dc75d 100644 --- a/drivers/ide/gayle.c +++ b/drivers/ide/gayle.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/zorro.h> #include <linux/module.h> +#include <linux/platform_device.h> #include <asm/setup.h> #include <asm/amigahw.h> @@ -24,15 +25,6 @@ /* - * Bases of the IDE interfaces - */ - -#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */ -#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */ - -#define GAYLE_IDEREG_SIZE 0x2000 - - /* * Offsets from one of the above bases */ @@ -53,51 +45,39 @@ #define GAYLE_NEXT_PORT 0x1000 -#ifndef CONFIG_BLK_DEV_IDEDOUBLER -#define GAYLE_NUM_HWIFS 1 -#define GAYLE_NUM_PROBE_HWIFS GAYLE_NUM_HWIFS -#define GAYLE_HAS_CONTROL_REG 1 -#else /* CONFIG_BLK_DEV_IDEDOUBLER */ #define GAYLE_NUM_HWIFS 2 #define GAYLE_NUM_PROBE_HWIFS (ide_doubler ? GAYLE_NUM_HWIFS : \ GAYLE_NUM_HWIFS-1) #define GAYLE_HAS_CONTROL_REG (!ide_doubler) -static int ide_doubler; +static bool ide_doubler; module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); -#endif /* CONFIG_BLK_DEV_IDEDOUBLER */ - /* * Check and acknowledge the interrupt status */ -static int gayle_ack_intr_a4000(ide_hwif_t *hwif) +static int gayle_test_irq(ide_hwif_t *hwif) { - unsigned char ch; + unsigned char ch; - ch = z_readb(hwif->io_ports.irq_addr); - if (!(ch & GAYLE_IRQ_IDE)) - return 0; - return 1; + ch = z_readb(hwif->io_ports.irq_addr); + if (!(ch & GAYLE_IRQ_IDE)) + return 0; + return 1; } -static int gayle_ack_intr_a1200(ide_hwif_t *hwif) +static void gayle_a1200_clear_irq(ide_drive_t *drive) { - unsigned char ch; + ide_hwif_t *hwif = drive->hwif; - ch = z_readb(hwif->io_ports.irq_addr); - if (!(ch & GAYLE_IRQ_IDE)) - return 0; - (void)z_readb(hwif->io_ports.status_addr); - z_writeb(0x7c, hwif->io_ports.irq_addr); - return 1; + (void)z_readb(hwif->io_ports.status_addr); + z_writeb(0x7c, hwif->io_ports.irq_addr); } -static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, - unsigned long ctl, unsigned long irq_port, - ide_ack_intr_t *ack_intr) +static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base, + unsigned long ctl, unsigned long irq_port) { int i; @@ -112,83 +92,98 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, hw->io_ports.irq_addr = irq_port; hw->irq = IRQ_AMIGA_PORTS; - hw->ack_intr = ack_intr; - - hw->chipset = ide_generic; } +static const struct ide_port_ops gayle_a4000_port_ops = { + .test_irq = gayle_test_irq, +}; + +static const struct ide_port_ops gayle_a1200_port_ops = { + .clear_irq = gayle_a1200_clear_irq, + .test_irq = gayle_test_irq, +}; + static const struct ide_port_info gayle_port_info = { - .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA, + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE | + IDE_HFLAG_NO_DMA, + .irq_flags = IRQF_SHARED, + .chipset = ide_generic, }; /* * Probe for a Gayle IDE interface (and optionally for an IDE doubler) */ -static int __init gayle_init(void) +static int __init amiga_gayle_ide_probe(struct platform_device *pdev) { - unsigned long phys_base, res_start, res_n; - unsigned long base, ctrlport, irqport; - ide_ack_intr_t *ack_intr; - int a4000, i, rc; - hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL }; - - if (!MACH_IS_AMIGA) - return -ENODEV; - - if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE)) - goto found; - -#ifdef CONFIG_ZORRO - if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE, - NULL)) - goto found; -#endif - return -ENODEV; - -found: - printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n", - a4000 ? 4000 : 1200, -#ifdef CONFIG_BLK_DEV_IDEDOUBLER - ide_doubler ? ", IDE doubler" : -#endif - ""); - - if (a4000) { - phys_base = GAYLE_BASE_4000; - irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000); - ack_intr = gayle_ack_intr_a4000; - } else { - phys_base = GAYLE_BASE_1200; - irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200); - ack_intr = gayle_ack_intr_a1200; - } -/* - * FIXME: we now have selectable modes between mmio v/s iomio - */ - - res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1); - res_n = GAYLE_IDEREG_SIZE; - - if (!request_mem_region(res_start, res_n, "IDE")) + struct resource *res; + struct gayle_ide_platform_data *pdata; + unsigned long base, ctrlport, irqport; + unsigned int i; + int error; + struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS]; + struct ide_port_info d = gayle_port_info; + struct ide_host *host; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + if (!request_mem_region(res->start, resource_size(res), "IDE")) return -EBUSY; - for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) { - base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT); - ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0; + pdata = dev_get_platdata(&pdev->dev); + pr_info("ide: Gayle IDE controller (A%u style%s)\n", + pdata->explicit_ack ? 1200 : 4000, + ide_doubler ? ", IDE doubler" : ""); + + base = (unsigned long)ZTWO_VADDR(pdata->base); + ctrlport = 0; + irqport = (unsigned long)ZTWO_VADDR(pdata->irqport); + if (pdata->explicit_ack) + d.port_ops = &gayle_a1200_port_ops; + else + d.port_ops = &gayle_a4000_port_ops; + + for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++, base += GAYLE_NEXT_PORT) { + if (GAYLE_HAS_CONTROL_REG) + ctrlport = base + GAYLE_CONTROL; + + gayle_setup_ports(&hw[i], base, ctrlport, irqport); + hws[i] = &hw[i]; + } - gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr); + error = ide_host_add(&d, hws, i, &host); + if (error) + goto out; - hws[i] = &hw[i]; - } + platform_set_drvdata(pdev, host); + return 0; - rc = ide_host_add(&gayle_port_info, hws, NULL); - if (rc) - release_mem_region(res_start, res_n); +out: + release_mem_region(res->start, resource_size(res)); + return error; +} + +static int __exit amiga_gayle_ide_remove(struct platform_device *pdev) +{ + struct ide_host *host = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - return rc; + ide_host_remove(host); + release_mem_region(res->start, resource_size(res)); + return 0; } -module_init(gayle_init); +static struct platform_driver amiga_gayle_ide_driver = { + .remove = __exit_p(amiga_gayle_ide_remove), + .driver = { + .name = "amiga-gayle-ide", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:amiga-gayle-ide"); diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index 3eb9b5c63a0..696b6c1ec94 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -3,7 +3,7 @@ * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc * Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * Portions Copyright (C) 2005-2008 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. * * Thanks to HighPoint Technologies for their assistance, and hardware. * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his @@ -12,7 +12,7 @@ * * * HighPoint has its own drivers (open source except for the RAID part) - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. + * available from http://www.highpoint-tech.com/USA_new/service_support.htm * This may be useful to anyone wanting to work on this driver, however do not * trust them too much since the code tends to become less and less meaningful * as the time passes... :-/ @@ -114,6 +114,8 @@ * the register setting lists into the table indexed by the clock selected * - set the correct hwif->ultra_mask for each individual chip * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards + * - stop resetting HPT370's state machine before each DMA transfer as that has + * caused more harm than good * Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com> */ @@ -126,6 +128,7 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> +#include <linux/slab.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -133,17 +136,9 @@ #define DRV_NAME "hpt366" /* various tuning parameters */ -#define HPT_RESET_STATE_ENGINE +#undef HPT_RESET_STATE_ENGINE #undef HPT_DELAY_INTERRUPT -static const char *quirk_drives[] = { - "QUANTUM FIREBALLlct08 08", - "QUANTUM FIREBALLP KA6.4", - "QUANTUM FIREBALLP LM20.4", - "QUANTUM FIREBALLP LM20.5", - NULL -}; - static const char *bad_ata100_5[] = { "IBM-DTLA-307075", "IBM-DTLA-307060", @@ -303,68 +298,6 @@ static u32 twenty_five_base_hpt36x[] = { /* XFER_PIO_0 */ 0xc0d08585 }; -#if 0 -/* These are the timing tables from the HighPoint open source drivers... */ -static u32 thirty_three_base_hpt37x[] = { - /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */ - /* XFER_UDMA_5 */ 0x12446231, - /* XFER_UDMA_4 */ 0x12446231, - /* XFER_UDMA_3 */ 0x126c6231, - /* XFER_UDMA_2 */ 0x12486231, - /* XFER_UDMA_1 */ 0x124c6233, - /* XFER_UDMA_0 */ 0x12506297, - - /* XFER_MW_DMA_2 */ 0x22406c31, - /* XFER_MW_DMA_1 */ 0x22406c33, - /* XFER_MW_DMA_0 */ 0x22406c97, - - /* XFER_PIO_4 */ 0x06414e31, - /* XFER_PIO_3 */ 0x06414e42, - /* XFER_PIO_2 */ 0x06414e53, - /* XFER_PIO_1 */ 0x06814e93, - /* XFER_PIO_0 */ 0x06814ea7 -}; - -static u32 fifty_base_hpt37x[] = { - /* XFER_UDMA_6 */ 0x12848242, - /* XFER_UDMA_5 */ 0x12848242, - /* XFER_UDMA_4 */ 0x12ac8242, - /* XFER_UDMA_3 */ 0x128c8242, - /* XFER_UDMA_2 */ 0x120c8242, - /* XFER_UDMA_1 */ 0x12148254, - /* XFER_UDMA_0 */ 0x121882ea, - - /* XFER_MW_DMA_2 */ 0x22808242, - /* XFER_MW_DMA_1 */ 0x22808254, - /* XFER_MW_DMA_0 */ 0x228082ea, - - /* XFER_PIO_4 */ 0x0a81f442, - /* XFER_PIO_3 */ 0x0a81f443, - /* XFER_PIO_2 */ 0x0a81f454, - /* XFER_PIO_1 */ 0x0ac1f465, - /* XFER_PIO_0 */ 0x0ac1f48a -}; - -static u32 sixty_six_base_hpt37x[] = { - /* XFER_UDMA_6 */ 0x1c869c62, - /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */ - /* XFER_UDMA_4 */ 0x1c8a9c62, - /* XFER_UDMA_3 */ 0x1c8e9c62, - /* XFER_UDMA_2 */ 0x1c929c62, - /* XFER_UDMA_1 */ 0x1c9a9c62, - /* XFER_UDMA_0 */ 0x1c829c62, - - /* XFER_MW_DMA_2 */ 0x2c829c62, - /* XFER_MW_DMA_1 */ 0x2c829c66, - /* XFER_MW_DMA_0 */ 0x2c829d2e, - - /* XFER_PIO_4 */ 0x0c829c62, - /* XFER_PIO_3 */ 0x0c829c84, - /* XFER_PIO_2 */ 0x0c829ca6, - /* XFER_PIO_1 */ 0x0d029d26, - /* XFER_PIO_0 */ 0x0d029d5e -}; -#else /* * The following are the new timing tables with PIO mode data/taskfile transfer * overclocking fixed... @@ -430,16 +363,13 @@ static u32 sixty_six_base_hpt37x[] = { /* XFER_PIO_1 */ 0x0d02ff26, /* XFER_PIO_0 */ 0x0d42ff7f }; -#endif -#define HPT366_DEBUG_DRIVE_INFO 0 #define HPT371_ALLOW_ATA133_6 1 #define HPT302_ALLOW_ATA133_6 1 #define HPT372_ALLOW_ATA133_6 1 #define HPT370_ALLOW_ATA100_5 0 #define HPT366_ALLOW_ATA66_4 1 #define HPT366_ALLOW_ATA66_3 1 -#define HPT366_MAX_DEVS 8 /* Supported ATA clock frequencies */ enum ata_clock { @@ -513,7 +443,7 @@ static struct hpt_timings hpt37x_timings = { } }; -static const struct hpt_info hpt36x __devinitdata = { +static const struct hpt_info hpt36x = { .chip_name = "HPT36x", .chip_type = HPT36x, .udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2, @@ -521,7 +451,7 @@ static const struct hpt_info hpt36x __devinitdata = { .timings = &hpt36x_timings }; -static const struct hpt_info hpt370 __devinitdata = { +static const struct hpt_info hpt370 = { .chip_name = "HPT370", .chip_type = HPT370, .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4, @@ -529,7 +459,7 @@ static const struct hpt_info hpt370 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt370a __devinitdata = { +static const struct hpt_info hpt370a = { .chip_name = "HPT370A", .chip_type = HPT370A, .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4, @@ -537,7 +467,7 @@ static const struct hpt_info hpt370a __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt374 __devinitdata = { +static const struct hpt_info hpt374 = { .chip_name = "HPT374", .chip_type = HPT374, .udma_mask = ATA_UDMA5, @@ -545,7 +475,7 @@ static const struct hpt_info hpt374 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt372 __devinitdata = { +static const struct hpt_info hpt372 = { .chip_name = "HPT372", .chip_type = HPT372, .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -553,7 +483,7 @@ static const struct hpt_info hpt372 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt372a __devinitdata = { +static const struct hpt_info hpt372a = { .chip_name = "HPT372A", .chip_type = HPT372A, .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -561,7 +491,7 @@ static const struct hpt_info hpt372a __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt302 __devinitdata = { +static const struct hpt_info hpt302 = { .chip_name = "HPT302", .chip_type = HPT302, .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -569,7 +499,7 @@ static const struct hpt_info hpt302 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt371 __devinitdata = { +static const struct hpt_info hpt371 = { .chip_name = "HPT371", .chip_type = HPT371, .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -577,7 +507,7 @@ static const struct hpt_info hpt371 __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt372n __devinitdata = { +static const struct hpt_info hpt372n = { .chip_name = "HPT372N", .chip_type = HPT372N, .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -585,7 +515,7 @@ static const struct hpt_info hpt372n __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt302n __devinitdata = { +static const struct hpt_info hpt302n = { .chip_name = "HPT302N", .chip_type = HPT302N, .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -593,7 +523,7 @@ static const struct hpt_info hpt302n __devinitdata = { .timings = &hpt37x_timings }; -static const struct hpt_info hpt371n __devinitdata = { +static const struct hpt_info hpt371n = { .chip_name = "HPT371N", .chip_type = HPT371N, .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, @@ -698,14 +628,14 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info) return info->timings->clock_table[info->clock][i]; } -static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) +static void hpt3xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); struct hpt_info *info = hpt3xx_get_info(hwif->dev); struct hpt_timings *t = info->timings; u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; + const u8 speed = drive->dma_mode; u32 new_itr = get_speed_setting(speed, info); u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask : (speed < XFER_UDMA_0 ? t->dma_mask : @@ -722,23 +652,10 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) pci_write_config_dword(dev, itr_addr, new_itr); } -static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - hpt3xx_set_mode(drive, XFER_PIO_0 + pio); -} - -static void hpt3xx_quirkproc(ide_drive_t *drive) +static void hpt3xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - char *m = (char *)&drive->id[ATA_ID_PROD]; - const char **list = quirk_drives; - - while (*list) - if (strstr(m, *list++)) { - drive->quirk_list = 1; - return; - } - - drive->quirk_list = 0; + drive->dma_mode = drive->pio_mode; + hpt3xx_set_mode(hwif, drive); } static void hpt3xx_maskproc(ide_drive_t *drive, int mask) @@ -747,7 +664,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask) struct pci_dev *dev = to_pci_dev(hwif->dev); struct hpt_info *info = hpt3xx_get_info(hwif->dev); - if (drive->quirk_list == 0) + if ((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0) return; if (info->chip_type >= HPT370) { @@ -808,7 +725,7 @@ static void hpt370_irq_timeout(ide_drive_t *drive) /* get DMA command mode */ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); /* stop DMA */ - outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD); + outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD); hpt370_clear_engine(drive); } @@ -825,22 +742,16 @@ static int hpt370_dma_end(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - if (dma_stat & 0x01) { + if (dma_stat & ATA_DMA_ACTIVE) { /* wait a little */ udelay(20); dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - if (dma_stat & 0x01) + if (dma_stat & ATA_DMA_ACTIVE) hpt370_irq_timeout(drive); } return ide_dma_end(drive); } -static void hpt370_dma_timeout(ide_drive_t *drive) -{ - hpt370_irq_timeout(drive); - ide_dma_timeout(drive); -} - /* returns 1 if DMA IRQ issued, 0 otherwise */ static int hpt374_dma_test_irq(ide_drive_t *drive) { @@ -857,7 +768,7 @@ static int hpt374_dma_test_irq(ide_drive_t *drive) dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); /* return 1 if INTR asserted */ - if (dma_stat & 4) + if (dma_stat & ATA_DMA_INTR) return 1; return 0; @@ -927,7 +838,7 @@ static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode) static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) { - hpt3xxn_set_clock(drive->hwif, rq_data_dir(rq) ? 0x23 : 0x21); + hpt3xxn_set_clock(drive->hwif, rq_data_dir(rq) ? 0x21 : 0x23); } /** @@ -995,7 +906,7 @@ static void hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr) pci_write_config_byte(dev, mcr_addr + 1, new_mcr); } -static unsigned int init_chipset_hpt366(struct pci_dev *dev) +static int init_chipset_hpt366(struct pci_dev *dev) { unsigned long io_base = pci_resource_start(dev, 4); struct hpt_info *info = hpt3xx_get_info(&dev->dev); @@ -1237,7 +1148,7 @@ static unsigned int init_chipset_hpt366(struct pci_dev *dev) hpt3xx_disable_fast_irq(dev, 0x50); hpt3xx_disable_fast_irq(dev, 0x54); - return dev->irq; + return 0; } static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) @@ -1262,8 +1173,9 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) u16 mcr; pci_read_config_word(dev, mcr_addr, &mcr); - pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); - /* now read cable id register */ + pci_write_config_word(dev, mcr_addr, mcr | 0x8000); + /* Debounce, then read cable ID register */ + udelay(10); pci_read_config_byte(dev, 0x5a, &scr1); pci_write_config_word(dev, mcr_addr, mcr); } else if (chip_type >= HPT370) { @@ -1274,17 +1186,18 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) u8 scr2 = 0; pci_read_config_byte(dev, 0x5b, &scr2); - pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); - /* now read cable id register */ + pci_write_config_byte(dev, 0x5b, scr2 & ~1); + /* Debounce, then read cable ID register */ + udelay(10); pci_read_config_byte(dev, 0x5a, &scr1); - pci_write_config_byte(dev, 0x5b, scr2); + pci_write_config_byte(dev, 0x5b, scr2); } else pci_read_config_byte(dev, 0x5a, &scr1); return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) +static void init_hwif_hpt366(ide_hwif_t *hwif) { struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 chip_type = info->chip_type; @@ -1308,7 +1221,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) } } -static int __devinit init_dma_hpt366(ide_hwif_t *hwif, +static int init_dma_hpt366(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -1352,7 +1265,7 @@ static int __devinit init_dma_hpt366(ide_hwif_t *hwif, return 0; } -static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) +static void hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) { if (dev2->irq != dev->irq) { /* FIXME: we need a core pci_set_interrupt() */ @@ -1362,7 +1275,7 @@ static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) } } -static void __devinit hpt371_init(struct pci_dev *dev) +static void hpt371_init(struct pci_dev *dev) { u8 mcr1 = 0; @@ -1377,7 +1290,7 @@ static void __devinit hpt371_init(struct pci_dev *dev) pci_write_config_byte(dev, 0x50, mcr1 & ~0x04); } -static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) +static int hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) { u8 mcr1 = 0, pin1 = 0, pin2 = 0; @@ -1408,7 +1321,6 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) static const struct ide_port_ops hpt3xx_port_ops = { .set_pio_mode = hpt3xx_set_pio_mode, .set_dma_mode = hpt3xx_set_mode, - .quirkproc = hpt3xx_quirkproc, .maskproc = hpt3xx_maskproc, .mdma_filter = hpt3xx_mdma_filter, .udma_filter = hpt3xx_udma_filter, @@ -1418,40 +1330,38 @@ static const struct ide_port_ops hpt3xx_port_ops = { static const struct ide_dma_ops hpt37x_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, .dma_end = hpt374_dma_end, .dma_test_irq = hpt374_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; static const struct ide_dma_ops hpt370_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = hpt370_dma_start, .dma_end = hpt370_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = hpt370_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, + .dma_clear = hpt370_irq_timeout, .dma_sff_read_status = ide_dma_sff_read_status, }; static const struct ide_dma_ops hpt36x_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, .dma_end = ide_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = hpt366_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info hpt366_chipsets[] __devinitdata = { +static const struct ide_port_info hpt366_chipsets[] = { { /* 0: HPT36x */ .name = DRV_NAME, .init_chipset = init_chipset_hpt366, @@ -1492,7 +1402,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { * Called when the PCI registration layer (or the IDE initialization) * finds a device matching our IDE device tables. */ -static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct hpt_info *info = NULL; struct hpt_info *dyn_info; @@ -1589,7 +1499,7 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic return ret; } -static void __devexit hpt366_remove(struct pci_dev *dev) +static void hpt366_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct ide_info *info = host->host_priv; @@ -1600,7 +1510,7 @@ static void __devexit hpt366_remove(struct pci_dev *dev) kfree(info); } -static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = { +static const struct pci_device_id hpt366_pci_tbl[] = { { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 }, { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 }, { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 }, @@ -1615,7 +1525,7 @@ static struct pci_driver hpt366_pci_driver = { .name = "HPT366_IDE", .id_table = hpt366_pci_tbl, .probe = hpt366_init_one, - .remove = __devexit_p(hpt366_remove), + .remove = hpt366_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c index c7e5c2246b7..1e0fd3aa962 100644 --- a/drivers/ide/ht6560b.c +++ b/drivers/ide/ht6560b.c @@ -10,7 +10,6 @@ * Author: Mikko Ala-Fossi <maf@iki.fi> * Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl> * - * Try: http://www.maf.iki.fi/~maf/ht6560b/ */ #define DRV_NAME "ht6560b" @@ -44,7 +43,12 @@ * bit3 (0x08): "1" 3 cycle time, "0" 2 cycle time (?) */ #define HT_CONFIG_PORT 0x3e6 -#define HT_CONFIG(drivea) (u8)(((drivea)->drive_data & 0xff00) >> 8) + +static inline u8 HT_CONFIG(ide_drive_t *drive) +{ + return ((unsigned long)ide_get_drivedata(drive) & 0xff00) >> 8; +} + /* * FIFO + PREFETCH (both a/b-model) */ @@ -90,7 +94,11 @@ * Active Time for each drive. Smaller value gives higher speed. * In case of failures you should probably fall back to a higher value. */ -#define HT_TIMING(drivea) (u8)((drivea)->drive_data & 0x00ff) +static inline u8 HT_TIMING(ide_drive_t *drive) +{ + return (unsigned long)ide_get_drivedata(drive) & 0x00ff; +} + #define HT_TIMING_DEFAULT 0xff /* @@ -103,7 +111,7 @@ /* * This routine is invoked from ide.c to prepare for access to a given drive. */ -static void ht6560b_selectproc (ide_drive_t *drive) +static void ht6560b_dev_select(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; unsigned long flags; @@ -143,6 +151,8 @@ static void ht6560b_selectproc (ide_drive_t *drive) #endif } local_irq_restore(flags); + + outb(drive->select | ATA_DEVICE_OBS, hwif->io_ports.device_addr); } /* @@ -240,23 +250,27 @@ static DEFINE_SPINLOCK(ht6560b_lock); */ static void ht_set_prefetch(ide_drive_t *drive, u8 state) { - unsigned long flags; + unsigned long flags, config; int t = HT_PREFETCH_MODE << 8; spin_lock_irqsave(&ht6560b_lock, flags); + config = (unsigned long)ide_get_drivedata(drive); + /* * Prefetch mode and unmask irq seems to conflict */ if (state) { - drive->drive_data |= t; /* enable prefetch mode */ + config |= t; /* enable prefetch mode */ drive->dev_flags |= IDE_DFLAG_NO_UNMASK; drive->dev_flags &= ~IDE_DFLAG_UNMASK; } else { - drive->drive_data &= ~t; /* disable prefetch mode */ + config &= ~t; /* disable prefetch mode */ drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK; } + ide_set_drivedata(drive, (void *)config); + spin_unlock_irqrestore(&ht6560b_lock, flags); #ifdef DEBUG @@ -264,9 +278,10 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state) #endif } -static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void ht6560b_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - unsigned long flags; + unsigned long flags, config; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 timing; switch (pio) { @@ -279,8 +294,10 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) timing = ht_pio2timings(drive, pio); spin_lock_irqsave(&ht6560b_lock, flags); - drive->drive_data &= 0xff00; - drive->drive_data |= timing; + config = (unsigned long)ide_get_drivedata(drive); + config &= 0xff00; + config |= timing; + ide_set_drivedata(drive, (void *)config); spin_unlock_irqrestore(&ht6560b_lock, flags); #ifdef DEBUG @@ -297,23 +314,37 @@ static void __init ht6560b_init_dev(ide_drive_t *drive) if (hwif->channel) t |= (HT_SECONDARY_IF << 8); - drive->drive_data = t; + ide_set_drivedata(drive, (void *)t); } -static int probe_ht6560b; +static bool probe_ht6560b; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); +static const struct ide_tp_ops ht6560b_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, + + .dev_select = ht6560b_dev_select, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; + static const struct ide_port_ops ht6560b_port_ops = { .init_dev = ht6560b_init_dev, .set_pio_mode = ht6560b_set_pio_mode, - .selectproc = ht6560b_selectproc, }; -static const struct ide_port_info ht6560b_port_info __initdata = { +static const struct ide_port_info ht6560b_port_info __initconst = { .name = DRV_NAME, .chipset = ide_ht6560b, + .tp_ops = &ht6560b_tp_ops, .port_ops = &ht6560b_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */ IDE_HFLAG_NO_DMA | diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 97a35c667ae..9f0a48e39b8 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -234,9 +234,11 @@ static const struct ide_port_ops icside_v6_no_dma_port_ops = { * MW1 80 50 50 150 C * MW2 70 25 25 120 C */ -static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) +static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - int cycle_time, use_dma_info = 0; + unsigned long cycle_time = 0; + int use_dma_info = 0; + const u8 xfer_mode = drive->dma_mode; switch (xfer_mode) { case XFER_MW_DMA_2: @@ -267,10 +269,11 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time) cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME]; - drive->drive_data = cycle_time; + ide_set_drivedata(drive, (void *)cycle_time); - printk("%s: %s selected (peak %dMB/s)\n", drive->name, - ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data); + printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n", + drive->name, ide_xfer_verbose(xfer_mode), + 2000 / (cycle_time ? cycle_time : (unsigned long) -1)); } static const struct ide_port_ops icside_v6_port_ops = { @@ -287,13 +290,8 @@ static int icside_dma_end(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; struct expansion_card *ec = ECARD_DEV(hwif->dev); - drive->waiting_for_dma = 0; - disable_dma(ec->dma); - /* Teardown mappings after DMA has completed. */ - ide_destroy_dmatable(drive); - return get_dma_residue(ec->dma) != 0; } @@ -307,15 +305,14 @@ static void icside_dma_start(ide_drive_t *drive) enable_dma(ec->dma); } -static int icside_dma_setup(ide_drive_t *drive) +static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; struct expansion_card *ec = ECARD_DEV(hwif->dev); struct icside_state *state = ecard_get_drvdata(ec); - struct request *rq = hwif->rq; unsigned int dma_mode; - if (rq_data_dir(rq)) + if (cmd->tf_flags & IDE_TFLAG_WRITE) dma_mode = DMA_MODE_WRITE; else dma_mode = DMA_MODE_READ; @@ -325,8 +322,6 @@ static int icside_dma_setup(ide_drive_t *drive) */ BUG_ON(dma_channel_active(ec->dma)); - hwif->sg_nents = ide_build_sglist(drive, rq); - /* * Ensure that we have the right interrupt routed. */ @@ -340,26 +335,18 @@ static int icside_dma_setup(ide_drive_t *drive) /* * Select the correct timing for this drive. */ - set_dma_speed(ec->dma, drive->drive_data); + set_dma_speed(ec->dma, (unsigned long)ide_get_drivedata(drive)); /* * Tell the DMA engine about the SG table and * data direction. */ - set_dma_sg(ec->dma, hwif->sg_table, hwif->sg_nents); + set_dma_sg(ec->dma, hwif->sg_table, cmd->sg_nents); set_dma_mode(ec->dma, dma_mode); - drive->waiting_for_dma = 1; - return 0; } -static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd) -{ - /* issue cmd to drive */ - ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD, NULL); -} - static int icside_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; @@ -383,15 +370,11 @@ static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d) static const struct ide_dma_ops icside_v6_dma_ops = { .dma_host_set = icside_dma_host_set, .dma_setup = icside_dma_setup, - .dma_exec_cmd = icside_dma_exec_cmd, .dma_start = icside_dma_start, .dma_end = icside_dma_end, .dma_test_irq = icside_dma_test_irq, - .dma_timeout = ide_dma_timeout, .dma_lost_irq = ide_dma_lost_irq, }; -#else -#define icside_v6_dma_ops NULL #endif static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) @@ -399,7 +382,7 @@ static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) return -EOPNOTSUPP; } -static void icside_setup_ports(hw_regs_t *hw, void __iomem *base, +static void icside_setup_ports(struct ide_hw *hw, void __iomem *base, struct cardinfo *info, struct expansion_card *ec) { unsigned long port = (unsigned long)base + info->dataoffset; @@ -416,15 +399,19 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base, hw->irq = ec->irq; hw->dev = &ec->dev; - hw->chipset = ide_acorn; } -static int __devinit -icside_register_v5(struct icside_state *state, struct expansion_card *ec) +static const struct ide_port_info icside_v5_port_info = { + .host_flags = IDE_HFLAG_NO_DMA, + .chipset = ide_acorn, +}; + +static int icside_register_v5(struct icside_state *state, + struct expansion_card *ec) { void __iomem *base; struct ide_host *host; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; int ret; base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); @@ -445,7 +432,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec); - host = ide_host_alloc(NULL, hws); + host = ide_host_alloc(&icside_v5_port_info, hws, 1); if (host == NULL) return -ENODEV; @@ -453,7 +440,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) ecard_set_drvdata(ec, state); - ret = ide_host_register(host, NULL, hws); + ret = ide_host_register(host, &icside_v5_port_info, hws); if (ret) goto err_free; @@ -464,23 +451,23 @@ err_free: return ret; } -static const struct ide_port_info icside_v6_port_info __initdata = { +static const struct ide_port_info icside_v6_port_info __initconst = { .init_dma = icside_dma_off_init, .port_ops = &icside_v6_no_dma_port_ops, - .dma_ops = &icside_v6_dma_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2, .swdma_mask = ATA_SWDMA2, + .chipset = ide_acorn, }; -static int __devinit -icside_register_v6(struct icside_state *state, struct expansion_card *ec) +static int icside_register_v6(struct icside_state *state, + struct expansion_card *ec) { void __iomem *ioc_base, *easi_base; struct ide_host *host; unsigned int sel = 0; int ret; - hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL }; + struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] }; struct ide_port_info d = icside_v6_port_info; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); @@ -520,7 +507,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec); icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec); - host = ide_host_alloc(&d, hws); + host = ide_host_alloc(&d, hws, 2); if (host == NULL) return -ENODEV; @@ -528,13 +515,15 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) ecard_set_drvdata(ec, state); +#ifdef CONFIG_BLK_DEV_IDEDMA_ICS if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; - d.dma_ops = NULL; + d.dma_ops = &icside_v6_dma_ops; } +#endif - ret = ide_host_register(host, NULL, hws); + ret = ide_host_register(host, &d, hws); if (ret) goto err_free; @@ -548,8 +537,7 @@ out: return ret; } -static int __devinit -icside_probe(struct expansion_card *ec, const struct ecard_id *id) +static int icside_probe(struct expansion_card *ec, const struct ecard_id *id) { struct icside_state *state; void __iomem *idmem; @@ -615,7 +603,7 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id) return ret; } -static void __devexit icside_remove(struct expansion_card *ec) +static void icside_remove(struct expansion_card *ec) { struct icside_state *state = ecard_get_drvdata(ec); @@ -677,7 +665,7 @@ static const struct ecard_id icside_ids[] = { static struct ecard_driver icside_driver = { .probe = icside_probe, - .remove = __devexit_p(icside_remove), + .remove = icside_remove, .shutdown = icside_shutdown, .id_table = icside_ids, .drv = { diff --git a/drivers/ide/ide-4drives.c b/drivers/ide/ide-4drives.c index 9e85b1ec960..547d7cf2e01 100644 --- a/drivers/ide/ide-4drives.c +++ b/drivers/ide/ide-4drives.c @@ -6,7 +6,7 @@ #define DRV_NAME "ide-4drives" -static int probe_4drives; +static bool probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); @@ -23,13 +23,15 @@ static const struct ide_port_ops ide_4drives_port_ops = { static const struct ide_port_info ide_4drives_port_info = { .port_ops = &ide_4drives_port_ops, - .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA, + .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA | + IDE_HFLAG_4DRIVES, + .chipset = ide_4drives, }; static int __init ide_4drives_init(void) { unsigned long base = 0x1f0, ctl = 0x3f6; - hw_regs_t hw, *hws[] = { &hw, &hw, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw, &hw }; if (probe_4drives == 0) return -ENODEV; @@ -51,9 +53,8 @@ static int __init ide_4drives_init(void) ide_std_init_ports(&hw, base, ctl); hw.irq = 14; - hw.chipset = ide_4drives; - return ide_host_add(&ide_4drives_port_info, hws, NULL); + return ide_host_add(&ide_4drives_port_info, hws, 2, NULL); } module_init(ide_4drives_init); diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index d8f295bdad7..b6940992a6f 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -7,22 +7,19 @@ * Copyright (C) 2006 Hannes Reinecke */ +#include <linux/acpi.h> #include <linux/ata.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/kernel.h> -#include <acpi/acpi.h> +#include <linux/slab.h> #include <linux/ide.h> #include <linux/pci.h> #include <linux/dmi.h> - -#include <acpi/acpi_bus.h> +#include <linux/module.h> #define REGS_PER_GTF 7 -struct taskfile_array { - u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */ -}; struct GTM_buffer { u32 PIO_speed0; @@ -54,15 +51,15 @@ struct ide_acpi_hwif_link { #define DEBPRINT(fmt, args...) do {} while (0) #endif /* DEBUGGING */ -static int ide_noacpi; +static bool ide_noacpi; module_param_named(noacpi, ide_noacpi, bool, 0); MODULE_PARM_DESC(noacpi, "disable IDE ACPI support"); -static int ide_acpigtf; +static bool ide_acpigtf; module_param_named(acpigtf, ide_acpigtf, bool, 0); MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support"); -static int ide_acpionboot; +static bool ide_acpionboot; module_param_named(acpionboot, ide_acpionboot, bool, 0); MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot"); @@ -89,16 +86,28 @@ static const struct dmi_system_id ide_acpi_dmi_table[] = { { } /* terminate list */ }; -static int ide_acpi_blacklist(void) +int ide_acpi_init(void) { - static int done; - if (done) - return 0; - done = 1; dmi_check_system(ide_acpi_dmi_table); return 0; } +bool ide_port_acpi(ide_hwif_t *hwif) +{ + return ide_noacpi == 0 && hwif->acpidata; +} + +static acpi_handle acpi_get_child(acpi_handle handle, u64 addr) +{ + struct acpi_device *adev; + + if (!handle || acpi_bus_get_device(handle, &adev)) + return NULL; + + adev = acpi_find_child_device(adev, addr, false); + return adev ? adev->handle : NULL; +} + /** * ide_get_dev_handle - finds acpi_handle and PCI device.function * @dev: device to locate @@ -110,14 +119,12 @@ static int ide_acpi_blacklist(void) * Returns 0 on success, <0 on error. */ static int ide_get_dev_handle(struct device *dev, acpi_handle *handle, - acpi_integer *pcidevfn) + u64 *pcidevfn) { struct pci_dev *pdev = to_pci_dev(dev); unsigned int bus, devnum, func; - acpi_integer addr; + u64 addr; acpi_handle dev_handle; - struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER, - .pointer = NULL}; acpi_status status; struct acpi_device_info *dinfo = NULL; int ret = -ENODEV; @@ -126,22 +133,21 @@ static int ide_get_dev_handle(struct device *dev, acpi_handle *handle, devnum = PCI_SLOT(pdev->devfn); func = PCI_FUNC(pdev->devfn); /* ACPI _ADR encoding for PCI bus: */ - addr = (acpi_integer)(devnum << 16 | func); + addr = (u64)(devnum << 16 | func); DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func); - dev_handle = DEVICE_ACPI_HANDLE(dev); + dev_handle = ACPI_HANDLE(dev); if (!dev_handle) { DEBPRINT("no acpi handle for device\n"); goto err; } - status = acpi_get_object_info(dev_handle, &buffer); + status = acpi_get_object_info(dev_handle, &dinfo); if (ACPI_FAILURE(status)) { DEBPRINT("get_object_info for device failed\n"); goto err; } - dinfo = buffer.pointer; if (dinfo && (dinfo->valid & ACPI_VALID_ADR) && dinfo->address == addr) { *pcidevfn = addr; @@ -174,7 +180,7 @@ static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif) { struct device *dev = hwif->gendev.parent; acpi_handle uninitialized_var(dev_handle); - acpi_integer pcidevfn; + u64 pcidevfn; acpi_handle chan_handle; int err; @@ -202,40 +208,6 @@ static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif) } /** - * ide_acpi_drive_get_handle - Get ACPI object handle for a given drive - * @drive: device to locate - * - * Retrieves the object handle of a given drive. According to the ACPI - * spec the drive is a child of the hwif. - * - * Returns handle on success, 0 on error. - */ -static acpi_handle ide_acpi_drive_get_handle(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - int port; - acpi_handle drive_handle; - - if (!hwif->acpidata) - return NULL; - - if (!hwif->acpidata->obj_handle) - return NULL; - - port = hwif->channel ? drive->dn - 2: drive->dn; - - DEBPRINT("ENTER: %s at channel#: %d port#: %d\n", - drive->name, hwif->channel, port); - - - /* TBD: could also check ACPI object VALID bits */ - drive_handle = acpi_get_child(hwif->acpidata->obj_handle, port); - DEBPRINT("drive %s handle 0x%p\n", drive->name, drive_handle); - - return drive_handle; -} - -/** * do_drive_get_GTF - get the drive bootup default taskfile settings * @drive: the drive for which the taskfile settings should be retrieved * @gtf_length: number of bytes of _GTF data returned at @gtf_address @@ -257,47 +229,15 @@ static int do_drive_get_GTF(ide_drive_t *drive, acpi_status status; struct acpi_buffer output; union acpi_object *out_obj; - ide_hwif_t *hwif = drive->hwif; - struct device *dev = hwif->gendev.parent; int err = -ENODEV; - int port; *gtf_length = 0; *gtf_address = 0UL; *obj_loc = 0UL; - if (ide_noacpi) - return 0; - - if (!dev) { - DEBPRINT("no PCI device for %s\n", hwif->name); - goto out; - } - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - goto out; - } - - port = hwif->channel ? drive->dn - 2: drive->dn; - - DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n", - hwif->name, dev->bus_id, port, hwif->channel); - - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) { - DEBPRINT("%s drive %d:%d not present\n", - hwif->name, hwif->channel, port); - goto out; - } - - /* Get this drive's _ADR info. if not already known. */ if (!drive->acpidata->obj_handle) { - drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive); - if (!drive->acpidata->obj_handle) { - DEBPRINT("No ACPI object found for %s\n", - drive->name); - goto out; - } + DEBPRINT("No ACPI object found for %s\n", drive->name); + goto out; } /* Setting up output buffer */ @@ -355,43 +295,6 @@ out: } /** - * taskfile_load_raw - send taskfile registers to drive - * @drive: drive to which output is sent - * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) - * - * Outputs IDE taskfile to the drive. - */ -static int taskfile_load_raw(ide_drive_t *drive, - const struct taskfile_array *gtf) -{ - ide_task_t args; - int err = 0; - - DEBPRINT("(0x1f1-1f7): hex: " - "%02x %02x %02x %02x %02x %02x %02x\n", - gtf->tfa[0], gtf->tfa[1], gtf->tfa[2], - gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]); - - memset(&args, 0, sizeof(ide_task_t)); - - /* convert gtf to IDE Taskfile */ - memcpy(&args.tf_array[7], >f->tfa, 7); - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - - if (!ide_acpigtf) { - DEBPRINT("_GTF execution disabled\n"); - return err; - } - - err = ide_no_data_taskfile(drive, &args); - if (err) - printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n", - __func__, err); - - return err; -} - -/** * do_drive_set_taskfiles - write the drive taskfile settings from _GTF * @drive: the drive to which the taskfile command should be sent * @gtf_length: total number of bytes of _GTF taskfiles @@ -404,43 +307,42 @@ static int do_drive_set_taskfiles(ide_drive_t *drive, unsigned int gtf_length, unsigned long gtf_address) { - int rc = -ENODEV, err; + int rc = 0, err; int gtf_count = gtf_length / REGS_PER_GTF; int ix; - struct taskfile_array *gtf; - - if (ide_noacpi) - return 0; - - DEBPRINT("ENTER: %s, hard_port#: %d\n", drive->name, drive->dn); - - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - goto out; - - if (!gtf_count) /* shouldn't be here */ - goto out; DEBPRINT("total GTF bytes=%u (0x%x), gtf_count=%d, addr=0x%lx\n", gtf_length, gtf_length, gtf_count, gtf_address); - if (gtf_length % REGS_PER_GTF) { - printk(KERN_ERR "%s: unexpected GTF length (%d)\n", - __func__, gtf_length); - goto out; - } - - rc = 0; + /* send all taskfile registers (0x1f1-0x1f7) *in*that*order* */ for (ix = 0; ix < gtf_count; ix++) { - gtf = (struct taskfile_array *) - (gtf_address + ix * REGS_PER_GTF); + u8 *gtf = (u8 *)(gtf_address + ix * REGS_PER_GTF); + struct ide_cmd cmd; - /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */ - err = taskfile_load_raw(drive, gtf); - if (err) + DEBPRINT("(0x1f1-1f7): " + "hex: %02x %02x %02x %02x %02x %02x %02x\n", + gtf[0], gtf[1], gtf[2], + gtf[3], gtf[4], gtf[5], gtf[6]); + + if (!ide_acpigtf) { + DEBPRINT("_GTF execution disabled\n"); + continue; + } + + /* convert GTF to taskfile */ + memset(&cmd, 0, sizeof(cmd)); + memcpy(&cmd.tf.feature, gtf, REGS_PER_GTF); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + + err = ide_no_data_taskfile(drive, &cmd); + if (err) { + printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n", + __func__, err); rc = err; + } } -out: return rc; } @@ -463,9 +365,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive) unsigned long gtf_address; unsigned long obj_loc; - if (ide_noacpi) - return 0; - DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn); ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc); @@ -500,16 +399,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) struct acpi_buffer output; union acpi_object *out_obj; - if (ide_noacpi) - return; - - DEBPRINT("ENTER:\n"); - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* Setting up output buffer for _GTM */ output.length = ACPI_ALLOCATE_BUFFER; output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ @@ -537,21 +426,21 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) out_obj = output.pointer; if (out_obj->type != ACPI_TYPE_BUFFER) { - kfree(output.pointer); DEBPRINT("Run _GTM: error: " "expected object type of ACPI_TYPE_BUFFER, " "got 0x%x\n", out_obj->type); + kfree(output.pointer); return; } if (!out_obj->buffer.length || !out_obj->buffer.pointer || out_obj->buffer.length != sizeof(struct GTM_buffer)) { - kfree(output.pointer); printk(KERN_ERR "%s: unexpected _GTM length (0x%x)[should be 0x%zx] or " "addr (0x%p)\n", __func__, out_obj->buffer.length, sizeof(struct GTM_buffer), out_obj->buffer.pointer); + kfree(output.pointer); return; } @@ -590,16 +479,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif) struct ide_acpi_drive_link *master = &hwif->acpidata->master; struct ide_acpi_drive_link *slave = &hwif->acpidata->slave; - if (ide_noacpi) - return; - - DEBPRINT("ENTER:\n"); - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* Give the GTM buffer + drive Identify data to the channel via the * _STM method: */ /* setup input parameters buffer for _STM */ @@ -638,35 +517,28 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) ide_drive_t *drive; int i; - if (ide_noacpi || ide_noacpi_psx) + if (ide_noacpi_psx) return; DEBPRINT("ENTER:\n"); - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } /* channel first and then drives for power on and verse versa for power off */ if (on) acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0); - ide_port_for_each_dev(i, drive, hwif) { - if (!drive->acpidata->obj_handle) - drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive); - - if (drive->acpidata->obj_handle && - (drive->dev_flags & IDE_DFLAG_PRESENT)) { + ide_port_for_each_present_dev(i, drive, hwif) { + if (drive->acpidata->obj_handle) acpi_bus_set_power(drive->acpidata->obj_handle, - on? ACPI_STATE_D0: ACPI_STATE_D3); - } + on ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD); } + if (!on) - acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3); + acpi_bus_set_power(hwif->acpidata->obj_handle, + ACPI_STATE_D3_COLD); } /** - * ide_acpi_init - initialize the ACPI link for an IDE interface + * ide_acpi_init_port - initialize the ACPI link for an IDE interface * @hwif: target IDE interface (channel) * * The ACPI spec is not quite clear when the drive identify buffer @@ -676,10 +548,8 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) * So we get the information during startup; but this means that * any changes during run-time will be lost after resume. */ -void ide_acpi_init(ide_hwif_t *hwif) +void ide_acpi_init_port(ide_hwif_t *hwif) { - ide_acpi_blacklist(); - hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL); if (!hwif->acpidata) return; @@ -708,22 +578,31 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) hwif->devices[0]->acpidata = &hwif->acpidata->master; hwif->devices[1]->acpidata = &hwif->acpidata->slave; - /* - * Send IDENTIFY for each drive - */ - ide_port_for_each_dev(i, drive, hwif) { - memset(drive->acpidata, 0, sizeof(*drive->acpidata)); + /* get _ADR info for each device */ + ide_port_for_each_present_dev(i, drive, hwif) { + acpi_handle dev_handle; - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - continue; + DEBPRINT("ENTER: %s at channel#: %d port#: %d\n", + drive->name, hwif->channel, drive->dn & 1); + + /* TBD: could also check ACPI object VALID bits */ + dev_handle = acpi_get_child(hwif->acpidata->obj_handle, + drive->dn & 1); + + DEBPRINT("drive %s handle 0x%p\n", drive->name, dev_handle); + + drive->acpidata->obj_handle = dev_handle; + } + /* send IDENTIFY for each device */ + ide_port_for_each_present_dev(i, drive, hwif) { err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff); if (err) DEBPRINT("identify device %s failed (%d)\n", drive->name, err); } - if (!ide_acpionboot) { + if (ide_noacpi || ide_acpionboot == 0) { DEBPRINT("ACPI methods disabled on boot\n"); return; } @@ -736,9 +615,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) ide_acpi_get_timing(hwif); ide_acpi_push_timing(hwif); - ide_port_for_each_dev(i, drive, hwif) { - if (drive->dev_flags & IDE_DFLAG_PRESENT) - /* Execute ACPI startup code */ - ide_acpi_exec_tfs(drive); + ide_port_for_each_present_dev(i, drive, hwif) { + ide_acpi_exec_tfs(drive); } } diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index e96c0126059..fac3d9da2e0 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -5,9 +5,16 @@ #include <linux/kernel.h> #include <linux/cdrom.h> #include <linux/delay.h> +#include <linux/export.h> #include <linux/ide.h> +#include <linux/scatterlist.h> +#include <linux/gfp.h> + #include <scsi/scsi.h> +#define DRV_NAME "ide-atapi" +#define PFX DRV_NAME ": " + #ifdef DEBUG #define debug_log(fmt, args...) \ printk(KERN_INFO "ide: " fmt, ## args) @@ -69,102 +76,39 @@ int ide_check_atapi_device(ide_drive_t *drive, const char *s) } EXPORT_SYMBOL_GPL(ide_check_atapi_device); -/* PIO data transfer routine using the scatter gather table. */ -int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int write) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data; - struct scatterlist *sg = pc->sg; - char *buf; - int count, done = 0; - - while (bcount) { - count = min(sg->length - pc->b_count, bcount); - - if (PageHighMem(sg_page(sg))) { - unsigned long flags; - - local_irq_save(flags); - buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset; - xf(drive, NULL, buf + pc->b_count, count); - kunmap_atomic(buf - sg->offset, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = sg_virt(sg); - xf(drive, NULL, buf + pc->b_count, count); - } - - bcount -= count; - pc->b_count += count; - done += count; - - if (pc->b_count == sg->length) { - if (!--pc->sg_cnt) - break; - pc->sg = sg = sg_next(sg); - pc->b_count = 0; - } - } - - if (bcount) { - printk(KERN_ERR "%s: %d leftover bytes, %s\n", drive->name, - bcount, write ? "padding with zeros" - : "discarding data"); - ide_pad_transfer(drive, write, bcount); - } - - return done; -} -EXPORT_SYMBOL_GPL(ide_io_buffers); - void ide_init_pc(struct ide_atapi_pc *pc) { memset(pc, 0, sizeof(*pc)); - pc->buf = pc->pc_buf; - pc->buf_size = IDE_PC_BUFFER_SIZE; } EXPORT_SYMBOL_GPL(ide_init_pc); /* - * Generate a new packet command request in front of the request queue, before - * the current request, so that it will be processed immediately, on the next - * pass through the driver. - */ -static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, - struct ide_atapi_pc *pc, struct request *rq) -{ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_flags |= REQ_PREEMPT; - rq->buffer = (char *)pc; - rq->rq_disk = disk; - memcpy(rq->cmd, pc->c, 12); - if (drive->media == ide_tape) - rq->cmd[13] = REQ_IDETAPE_PC1; - ide_do_drive_cmd(drive, rq); -} - -/* * Add a special packet command request to the tail of the request queue, * and wait for it to be serviced. */ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, - struct ide_atapi_pc *pc) + struct ide_atapi_pc *pc, void *buf, unsigned int bufflen) { struct request *rq; int error; rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; - rq->buffer = (char *)pc; + rq->special = (char *)pc; + + if (buf && bufflen) { + error = blk_rq_map_kern(drive->queue, rq, buf, bufflen, + GFP_NOIO); + if (error) + goto put_req; + } + memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; error = blk_execute_rq(drive->queue, disk, rq, 0); +put_req: blk_put_request(rq); - return error; } EXPORT_SYMBOL_GPL(ide_queue_pc_tail); @@ -176,7 +120,7 @@ int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk) ide_init_pc(&pc); pc.c[0] = TEST_UNIT_READY; - return ide_queue_pc_tail(drive, disk, &pc); + return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); } EXPORT_SYMBOL_GPL(ide_do_test_unit_ready); @@ -191,7 +135,7 @@ int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start) if (drive->media == ide_tape) pc.flags |= PC_FLAG_WAIT_FOR_DSC; - return ide_queue_pc_tail(drive, disk, &pc); + return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); } EXPORT_SYMBOL_GPL(ide_do_start_stop); @@ -206,7 +150,7 @@ int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on) pc.c[0] = ALLOW_MEDIUM_REMOVAL; pc.c[4] = on; - return ide_queue_pc_tail(drive, disk, &pc); + return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); } EXPORT_SYMBOL_GPL(ide_set_media_lock); @@ -224,20 +168,108 @@ void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) } EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); +void ide_prep_sense(ide_drive_t *drive, struct request *rq) +{ + struct request_sense *sense = &drive->sense_data; + struct request *sense_rq = &drive->sense_rq; + unsigned int cmd_len, sense_len; + int err; + + switch (drive->media) { + case ide_floppy: + cmd_len = 255; + sense_len = 18; + break; + case ide_tape: + cmd_len = 20; + sense_len = 20; + break; + default: + cmd_len = 18; + sense_len = 18; + } + + BUG_ON(sense_len > sizeof(*sense)); + + if (rq->cmd_type == REQ_TYPE_SENSE || drive->sense_rq_armed) + return; + + memset(sense, 0, sizeof(*sense)); + + blk_rq_init(rq->q, sense_rq); + + err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len, + GFP_NOIO); + if (unlikely(err)) { + if (printk_ratelimit()) + printk(KERN_WARNING PFX "%s: failed to map sense " + "buffer\n", drive->name); + return; + } + + sense_rq->rq_disk = rq->rq_disk; + sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; + sense_rq->cmd[4] = cmd_len; + sense_rq->cmd_type = REQ_TYPE_SENSE; + sense_rq->cmd_flags |= REQ_PREEMPT; + + if (drive->media == ide_tape) + sense_rq->cmd[13] = REQ_IDETAPE_PC1; + + drive->sense_rq_armed = true; +} +EXPORT_SYMBOL_GPL(ide_prep_sense); + +int ide_queue_sense_rq(ide_drive_t *drive, void *special) +{ + /* deferred failure from ide_prep_sense() */ + if (!drive->sense_rq_armed) { + printk(KERN_WARNING PFX "%s: error queuing a sense request\n", + drive->name); + return -ENOMEM; + } + + drive->sense_rq.special = special; + drive->sense_rq_armed = false; + + drive->hwif->rq = NULL; + + elv_add_request(drive->queue, &drive->sense_rq, ELEVATOR_INSERT_FRONT); + return 0; +} +EXPORT_SYMBOL_GPL(ide_queue_sense_rq); + /* * Called when an error was detected during the last packet command. - * We queue a request sense packet command in the head of the request list. + * We queue a request sense packet command at the head of the request + * queue. */ -void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk) +void ide_retry_pc(ide_drive_t *drive) { - struct request *rq = &drive->request_sense_rq; + struct request *failed_rq = drive->hwif->rq; + struct request *sense_rq = &drive->sense_rq; struct ide_atapi_pc *pc = &drive->request_sense_pc; (void)ide_read_error(drive); - ide_create_request_sense_cmd(drive, pc); + + /* init pc from sense_rq */ + ide_init_pc(pc); + memcpy(pc->c, sense_rq->cmd, 12); + if (drive->media == ide_tape) - set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - ide_queue_pc_head(drive, disk, pc, rq); + drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC; + + /* + * Push back the failed request and put request sense on top + * of it. The failed command will be retried after sense data + * is acquired. + */ + drive->hwif->rq = NULL; + ide_requeue_and_plug(drive, failed_rq); + if (ide_queue_sense_rq(drive, pc)) { + blk_start_request(failed_rq); + ide_complete_rq(drive, -EIO, blk_rq_bytes(failed_rq)); + } } EXPORT_SYMBOL_GPL(ide_retry_pc); @@ -264,7 +296,7 @@ int ide_cd_expiry(ide_drive_t *drive) break; default: if (!(rq->cmd_flags & REQ_QUIET)) - printk(KERN_INFO "cmd 0x%x timed out\n", + printk(KERN_INFO PFX "cmd 0x%x timed out\n", rq->cmd[0]); wait = 0; break; @@ -275,16 +307,80 @@ EXPORT_SYMBOL_GPL(ide_cd_expiry); int ide_cd_get_xferlen(struct request *rq) { - if (blk_fs_request(rq)) + switch (rq->cmd_type) { + case REQ_TYPE_FS: return 32768; - else if (blk_sense_request(rq) || blk_pc_request(rq) || - rq->cmd_type == REQ_TYPE_ATA_PC) - return rq->data_len; - else + case REQ_TYPE_SENSE: + case REQ_TYPE_BLOCK_PC: + case REQ_TYPE_ATA_PC: + return blk_rq_bytes(rq); + default: return 0; + } } EXPORT_SYMBOL_GPL(ide_cd_get_xferlen); +void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) +{ + struct ide_taskfile tf; + + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT | + IDE_VALID_LBAM | IDE_VALID_LBAH); + + *bcount = (tf.lbah << 8) | tf.lbam; + *ireason = tf.nsect & 3; +} +EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason); + +/* + * Check the contents of the interrupt reason register and attempt to recover if + * there are problems. + * + * Returns: + * - 0 if everything's ok + * - 1 if the request has to be terminated. + */ +int ide_check_ireason(ide_drive_t *drive, struct request *rq, int len, + int ireason, int rw) +{ + ide_hwif_t *hwif = drive->hwif; + + debug_log("ireason: 0x%x, rw: 0x%x\n", ireason, rw); + + if (ireason == (!rw << 1)) + return 0; + else if (ireason == (rw << 1)) { + printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n", + drive->name, __func__); + + if (dev_is_idecd(drive)) + ide_pad_transfer(drive, rw, len); + } else if (!rw && ireason == ATAPI_COD) { + if (dev_is_idecd(drive)) { + /* + * Some drives (ASUS) seem to tell us that status info + * is available. Just get it and ignore. + */ + (void)hwif->tp_ops->read_status(hwif); + return 0; + } + } else { + if (ireason & ATAPI_COD) + printk(KERN_ERR PFX "%s: CoD != 0 in %s\n", drive->name, + __func__); + + /* drive wants a command packet, or invalid ireason... */ + printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n", + drive->name, __func__, ireason); + } + + if (dev_is_idecd(drive) && rq->cmd_type == REQ_TYPE_ATA_PC) + rq->cmd_flags |= REQ_FAILED; + + return 1; +} +EXPORT_SYMBOL_GPL(ide_check_ireason); + /* * This is the usual interrupt handler which will be called during a packet * command. We will transfer some of the data (as requested by the drive) @@ -294,46 +390,46 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) { struct ide_atapi_pc *pc = drive->pc; ide_hwif_t *hwif = drive->hwif; + struct ide_cmd *cmd = &hwif->cmd; struct request *rq = hwif->rq; const struct ide_tp_ops *tp_ops = hwif->tp_ops; - xfer_func_t *xferfunc; - unsigned int timeout, temp; + unsigned int timeout, done; u16 bcount; u8 stat, ireason, dsc = 0; + u8 write = !!(pc->flags & PC_FLAG_WRITING); debug_log("Enter %s - interrupt handler\n", __func__); timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD : WAIT_TAPE_CMD; - if (pc->flags & PC_FLAG_TIMEDOUT) { - drive->pc_callback(drive, 0); - return ide_stopped; - } - /* Clear the interrupt */ stat = tp_ops->read_status(hwif); if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - if (hwif->dma_ops->dma_end(drive) || - (drive->media == ide_tape && (stat & ATA_ERR))) { + int rc; + + drive->waiting_for_dma = 0; + rc = hwif->dma_ops->dma_end(drive); + ide_dma_unmap_sg(drive, cmd); + + if (rc || (drive->media == ide_tape && (stat & ATA_ERR))) { if (drive->media == ide_floppy) - printk(KERN_ERR "%s: DMA %s error\n", + printk(KERN_ERR PFX "%s: DMA %s error\n", drive->name, rq_data_dir(pc->rq) ? "write" : "read"); pc->flags |= PC_FLAG_DMA_ERROR; - } else { - pc->xferred = pc->req_xfer; - if (drive->pc_update_buffers) - drive->pc_update_buffers(drive, pc); - } + } else + rq->resid_len = 0; debug_log("%s: DMA finished\n", drive->name); } /* No more interrupts */ if ((stat & ATA_DRQ) == 0) { + int uptodate, error; + debug_log("Packet command completed, %d bytes transferred\n", - pc->xferred); + blk_rq_bytes(rq)); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; @@ -351,15 +447,15 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) pc->rq->errors++; if (rq->cmd[0] == REQUEST_SENSE) { - printk(KERN_ERR "%s: I/O error in request sense" - " command\n", drive->name); + printk(KERN_ERR PFX "%s: I/O error in request " + "sense command\n", drive->name); return ide_do_reset(drive); } debug_log("[cmd %x]: check condition\n", rq->cmd[0]); /* Retry operation */ - ide_retry_pc(drive, rq->rq_disk); + ide_retry_pc(drive); /* queued, but not started */ return ide_stopped; @@ -369,16 +465,39 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) dsc = 1; + /* + * ->pc_callback() might change rq->data_len for + * residual count, cache total length. + */ + done = blk_rq_bytes(rq); + /* Command finished - Call the callback function */ - drive->pc_callback(drive, dsc); + uptodate = drive->pc_callback(drive, dsc); + + if (uptodate == 0) + drive->failed_pc = NULL; + + if (rq->cmd_type == REQ_TYPE_SPECIAL) { + rq->errors = 0; + error = 0; + } else { + + if (rq->cmd_type != REQ_TYPE_FS && uptodate <= 0) { + if (rq->errors == 0) + rq->errors = -EIO; + } + error = uptodate ? 0 : -EIO; + } + + ide_complete_rq(drive, error, blk_rq_bytes(rq)); return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "%s: The device wants to issue more interrupts " - "in DMA mode\n", drive->name); + printk(KERN_ERR PFX "%s: The device wants to issue more " + "interrupts in DMA mode\n", drive->name); ide_dma_off(drive); return ide_do_reset(drive); } @@ -386,74 +505,47 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) /* Get the number of bytes to transfer on this interrupt. */ ide_read_bcount_and_ireason(drive, &bcount, &ireason); - if (ireason & ATAPI_COD) { - printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); + if (ide_check_ireason(drive, rq, bcount, ireason, write)) return ide_do_reset(drive); - } - if (((ireason & ATAPI_IO) == ATAPI_IO) == - !!(pc->flags & PC_FLAG_WRITING)) { - /* Hopefully, we will never get here */ - printk(KERN_ERR "%s: We wanted to %s, but the device wants us " - "to %s!\n", drive->name, - (ireason & ATAPI_IO) ? "Write" : "Read", - (ireason & ATAPI_IO) ? "Read" : "Write"); - return ide_do_reset(drive); - } + done = min_t(unsigned int, bcount, cmd->nleft); + ide_pio_bytes(drive, cmd, write, done); + + /* Update transferred byte count */ + rq->resid_len -= done; + + bcount -= done; + + if (bcount) + ide_pad_transfer(drive, write, bcount); + + debug_log("[cmd %x] transferred %d bytes, padded %d bytes, resid: %u\n", + rq->cmd[0], done, bcount, rq->resid_len); - if (!(pc->flags & PC_FLAG_WRITING)) { - /* Reading - Check that we have enough space */ - temp = pc->xferred + bcount; - if (temp > pc->req_xfer) { - if (temp > pc->buf_size) { - printk(KERN_ERR "%s: The device wants to send " - "us more data than expected - " - "discarding data\n", - drive->name); - - ide_pad_transfer(drive, 0, bcount); - goto next_irq; - } - debug_log("The device wants to send us more data than " - "expected - allowing transfer\n"); - } - xferfunc = tp_ops->input_data; - } else - xferfunc = tp_ops->output_data; - - if ((drive->media == ide_floppy && !pc->buf) || - (drive->media == ide_tape && pc->bh)) { - int done = drive->pc_io_buffers(drive, pc, bcount, - !!(pc->flags & PC_FLAG_WRITING)); - - /* FIXME: don't do partial completions */ - if (drive->media == ide_floppy) - ide_end_request(drive, 1, done >> 9); - } else - xferfunc(drive, NULL, pc->cur_pos, bcount); - - /* Update the current position */ - pc->xferred += bcount; - pc->cur_pos += bcount; - - debug_log("[cmd %x] transferred %d bytes on that intr.\n", - rq->cmd[0], bcount); -next_irq: /* And set the interrupt handler again */ - ide_set_handler(drive, ide_pc_intr, timeout, NULL); + ide_set_handler(drive, ide_pc_intr, timeout); return ide_started; } -static u8 ide_read_ireason(ide_drive_t *drive) +static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf, + u16 bcount, u8 dma) { - ide_task_t task; + cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO; + cmd->valid.out.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | + IDE_VALID_FEATURE | valid_tf; + cmd->tf.command = ATA_CMD_PACKET; + cmd->tf.feature = dma; /* Use PIO/DMA */ + cmd->tf.lbam = bcount & 0xff; + cmd->tf.lbah = (bcount >> 8) & 0xff; +} - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_IN_NSECT; +static u8 ide_read_ireason(ide_drive_t *drive) +{ + struct ide_taskfile tf; - drive->hwif->tp_ops->tf_read(drive, &task); + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT); - return task.tf.nsect & 3; + return tf.nsect & 3; } static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) @@ -462,13 +554,13 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) while (retries-- && ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO))) { - printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing " "a packet command, retrying\n", drive->name); udelay(100); ireason = ide_read_ireason(drive); if (retries == 0) { - printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " - "a packet command, ignoring\n", + printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing" + " a packet command, ignoring\n", drive->name); ireason |= ATAPI_COD; ireason &= ~ATAPI_IO; @@ -499,7 +591,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) u8 ireason; if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " + printk(KERN_ERR PFX "%s: Strange, packet command initiated yet " "DRQ isn't asserted\n", drive->name); return startstop; } @@ -524,7 +616,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) /* * If necessary schedule the packet transfer to occur 'timeout' - * miliseconds later in ide_delayed_transfer_pc() after the + * milliseconds later in ide_delayed_transfer_pc() after the * device says it's ready for a packet. */ if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { @@ -541,18 +633,24 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) ireason = ide_wait_ireason(drive, ireason); if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); + printk(KERN_ERR PFX "%s: (IO,CoD) != (0,1) while " + "issuing a packet command\n", drive->name); return ide_do_reset(drive); } } + hwif->expiry = expiry; + /* Set the interrupt routine */ ide_set_handler(drive, (dev_is_idecd(drive) ? drive->irq_handler : ide_pc_intr), - timeout, expiry); + timeout); + + /* Send the actual packet */ + if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0) + hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len); /* Begin DMA, if necessary */ if (dev_is_idecd(drive)) { @@ -565,50 +663,47 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) } } - /* Send the actual packet */ - if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0) - hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len); - return ide_started; } -ide_startstop_t ide_issue_pc(ide_drive_t *drive) +ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) { struct ide_atapi_pc *pc; ide_hwif_t *hwif = drive->hwif; ide_expiry_t *expiry = NULL; - unsigned int timeout; - u32 tf_flags; + struct request *rq = hwif->rq; + unsigned int timeout, bytes; u16 bcount; + u8 valid_tf; + u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT); if (dev_is_idecd(drive)) { - tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL; - bcount = ide_cd_get_xferlen(hwif->rq); + valid_tf = IDE_VALID_NSECT | IDE_VALID_LBAL; + bcount = ide_cd_get_xferlen(rq); expiry = ide_cd_expiry; timeout = ATAPI_WAIT_PC; if (drive->dma) - drive->dma = !hwif->dma_ops->dma_setup(drive); + drive->dma = !ide_dma_prepare(drive, cmd); } else { pc = drive->pc; - /* We haven't transferred any data yet */ - pc->xferred = 0; - pc->cur_pos = pc->buf; + valid_tf = IDE_VALID_DEVICE; + bytes = blk_rq_bytes(rq); + bcount = ((drive->media == ide_tape) ? bytes + : min_t(unsigned int, + bytes, 63 * 1024)); - tf_flags = IDE_TFLAG_OUT_DEVICE; - bcount = ((drive->media == ide_tape) ? - pc->req_xfer : - min(pc->req_xfer, 63 * 1024)); + /* We haven't transferred any data yet */ + rq->resid_len = bcount; if (pc->flags & PC_FLAG_DMA_ERROR) { pc->flags &= ~PC_FLAG_DMA_ERROR; ide_dma_off(drive); } - if ((pc->flags & PC_FLAG_DMA_OK) && - (drive->dev_flags & IDE_DFLAG_USING_DMA)) - drive->dma = !hwif->dma_ops->dma_setup(drive); + if (pc->flags & PC_FLAG_DMA_OK) + drive->dma = !ide_dma_prepare(drive, cmd); if (!drive->dma) pc->flags &= ~PC_FLAG_DMA_OK; @@ -617,18 +712,18 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive) : WAIT_TAPE_CMD; } - ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma); + ide_init_packet_cmd(cmd, valid_tf, bcount, drive->dma); - /* Issue the packet command */ - if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { + (void)do_rw_taskfile(drive, cmd); + + if (drq_int) { if (drive->dma) drive->waiting_for_dma = 0; - ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc, - timeout, expiry); - return ide_started; - } else { - ide_execute_pkt_cmd(drive); - return ide_transfer_pc(drive); + hwif->expiry = expiry; } + + ide_execute_command(drive, cmd, ide_transfer_pc, timeout); + + return drq_int ? ide_started : ide_transfer_pc(drive); } EXPORT_SYMBOL_GPL(ide_issue_pc); diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index cae69372cf4..0b510bafd90 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -4,7 +4,7 @@ * Copyright (C) 1994-1996 Scott Snyder <snyder@fnald0.fnal.gov> * Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org> * Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de> - * Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2005, 2007-2009 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. @@ -12,12 +12,9 @@ * See Documentation/cdrom/ide-cd for usage information. * * Suggestions are welcome. Patches that work are more welcome though. ;-) - * For those wishing to work on this driver, please be sure you download - * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI - * (SFF-8020i rev 2.6) standards. These documents can be obtained by - * anonymous ftp from: - * ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps - * ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf + * + * Documentation: + * Mt. Fuji (SFF8090 version 4) and ATAPI (SFF-8020i rev 2.6) standards. * * For historical changelog please see: * Documentation/ide/ChangeLog.ide-cd.1994-2004 @@ -33,6 +30,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/timer.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/errno.h> @@ -45,7 +43,6 @@ /* For SCSI -> ATAPI command conversion */ #include <scsi/scsi.h> -#include <linux/irq.h> #include <linux/io.h> #include <asm/byteorder.h> #include <linux/uaccess.h> @@ -53,9 +50,10 @@ #include "ide-cd.h" +static DEFINE_MUTEX(ide_cd_mutex); static DEFINE_MUTEX(idecd_ref_mutex); -static void ide_cd_release(struct kref *); +static void ide_cd_release(struct device *); static struct cdrom_info *ide_cd_get(struct gendisk *disk) { @@ -67,7 +65,7 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk) if (ide_device_get(cd->drive)) cd = NULL; else - kref_get(&cd->kref); + get_device(&cd->dev); } mutex_unlock(&idecd_ref_mutex); @@ -79,7 +77,7 @@ static void ide_cd_put(struct cdrom_info *cd) ide_drive_t *drive = cd->drive; mutex_lock(&idecd_ref_mutex); - kref_put(&cd->kref, ide_cd_release); + put_device(&cd->dev); ide_device_put(drive); mutex_unlock(&idecd_ref_mutex); } @@ -95,17 +93,16 @@ static void cdrom_saw_media_change(ide_drive_t *drive) drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID; } -static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, - struct request_sense *sense) +static int cdrom_log_sense(ide_drive_t *drive, struct request *rq) { + struct request_sense *sense = &drive->sense_data; int log = 0; - ide_debug_log(IDE_DBG_SENSE, "Call %s, sense_key: 0x%x\n", __func__, - sense->sense_key); - if (!sense || !rq || (rq->cmd_flags & REQ_QUIET)) return 0; + ide_debug_log(IDE_DBG_SENSE, "sense_key: 0x%x", sense->sense_key); + switch (sense->sense_key) { case NO_SENSE: case RECOVERED_ERROR: @@ -144,22 +141,21 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, } static void cdrom_analyze_sense_data(ide_drive_t *drive, - struct request *failed_command, - struct request_sense *sense) + struct request *failed_command) { + struct request_sense *sense = &drive->sense_data; + struct cdrom_info *info = drive->driver_data; unsigned long sector; unsigned long bio_sectors; - struct cdrom_info *info = drive->driver_data; - ide_debug_log(IDE_DBG_SENSE, "Call %s, error_code: 0x%x, " - "sense_key: 0x%x\n", __func__, sense->error_code, - sense->sense_key); + ide_debug_log(IDE_DBG_SENSE, "error_code: 0x%x, sense_key: 0x%x", + sense->error_code, sense->sense_key); if (failed_command) - ide_debug_log(IDE_DBG_SENSE, "%s: failed cmd: 0x%x\n", - __func__, failed_command->cmd[0]); + ide_debug_log(IDE_DBG_SENSE, "failed cmd: 0x%x", + failed_command->cmd[0]); - if (!cdrom_log_sense(drive, failed_command, sense)) + if (!cdrom_log_sense(drive, failed_command)) return; /* @@ -180,20 +176,28 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, if (!sense->valid) break; if (failed_command == NULL || - !blk_fs_request(failed_command)) + failed_command->cmd_type != REQ_TYPE_FS) break; sector = (sense->information[0] << 24) | (sense->information[1] << 16) | (sense->information[2] << 8) | (sense->information[3]); - if (drive->queue->hardsect_size == 2048) + if (queue_logical_block_size(drive->queue) == 2048) /* device sector size is 2K */ sector <<= 2; bio_sectors = max(bio_sectors(failed_command->bio), 4U); sector &= ~(bio_sectors - 1); + /* + * The SCSI specification allows for the value + * returned by READ CAPACITY to be up to 75 2K + * sectors past the last readable block. + * Therefore, if we hit a medium error within the + * last 75 2K sectors, we decrease the saved size + * value. + */ if (sector < get_capacity(info->disk) && drive->probed_capacity - sector < 4 * 75) set_capacity(info->disk, sector); @@ -203,464 +207,216 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, ide_cd_log_error(drive->name, failed_command, sense); } -static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, - struct request *failed_command) +static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { - struct cdrom_info *info = drive->driver_data; - struct request *rq = &info->request_sense_request; - - ide_debug_log(IDE_DBG_SENSE, "Call %s\n", __func__); - - if (sense == NULL) - sense = &info->sense_data; - - /* stuff the sense request in front of our current request */ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_ATA_PC; - rq->rq_disk = info->disk; + /* + * For REQ_TYPE_SENSE, "rq->special" points to the original + * failed request. Also, the sense data should be read + * directly from rq which might be different from the original + * sense buffer if it got copied during mapping. + */ + struct request *failed = (struct request *)rq->special; + void *sense = bio_data(rq->bio); - rq->data = sense; - rq->cmd[0] = GPCMD_REQUEST_SENSE; - rq->cmd[4] = 18; - rq->data_len = 18; + if (failed) { + if (failed->sense) { + /* + * Sense is always read into drive->sense_data. + * Copy back if the failed request has its + * sense pointer set. + */ + memcpy(failed->sense, sense, 18); + failed->sense_len = rq->sense_len; + } + cdrom_analyze_sense_data(drive, failed); - rq->cmd_type = REQ_TYPE_SENSE; - rq->cmd_flags |= REQ_PREEMPT; + if (ide_end_rq(drive, failed, -EIO, blk_rq_bytes(failed))) + BUG(); + } else + cdrom_analyze_sense_data(drive, NULL); +} - /* NOTE! Save the failed command in "rq->buffer" */ - rq->buffer = (void *) failed_command; - if (failed_command) - ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x\n", - failed_command->cmd[0]); +/* + * Allow the drive 5 seconds to recover; some devices will return NOT_READY + * while flushing data from cache. + * + * returns: 0 failed (write timeout expired) + * 1 success + */ +static int ide_cd_breathe(ide_drive_t *drive, struct request *rq) +{ - ide_do_drive_cmd(drive, rq); -} + struct cdrom_info *info = drive->driver_data; -static void cdrom_end_request(ide_drive_t *drive, int uptodate) -{ - struct request *rq = drive->hwif->rq; - int nsectors = rq->hard_cur_sectors; + if (!rq->errors) + info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY; - ide_debug_log(IDE_DBG_FUNC, "Call %s, cmd: 0x%x, uptodate: 0x%x, " - "nsectors: %d\n", __func__, rq->cmd[0], uptodate, - nsectors); + rq->errors = 1; - if (blk_sense_request(rq) && uptodate) { + if (time_after(jiffies, info->write_timeout)) + return 0; + else { /* - * For REQ_TYPE_SENSE, "rq->buffer" points to the original - * failed request + * take a breather */ - struct request *failed = (struct request *) rq->buffer; - struct cdrom_info *info = drive->driver_data; - void *sense = &info->sense_data; - - if (failed) { - if (failed->sense) { - sense = failed->sense; - failed->sense_len = rq->sense_len; - } - cdrom_analyze_sense_data(drive, failed, sense); - /* - * now end the failed request - */ - if (blk_fs_request(failed)) { - if (ide_end_dequeued_request(drive, failed, 0, - failed->hard_nr_sectors)) - BUG(); - } else { - if (blk_end_request(failed, -EIO, - failed->data_len)) - BUG(); - } - } else - cdrom_analyze_sense_data(drive, NULL, sense); + blk_delay_queue(drive->queue, 1); + return 1; } - - if (!rq->current_nr_sectors && blk_fs_request(rq)) - uptodate = 1; - /* make sure it's fully ended */ - if (blk_pc_request(rq)) - nsectors = (rq->data_len + 511) >> 9; - if (!nsectors) - nsectors = 1; - - ide_debug_log(IDE_DBG_FUNC, "Exit %s, uptodate: 0x%x, nsectors: %d\n", - __func__, uptodate, nsectors); - - ide_end_request(drive, uptodate, nsectors); } -static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st) -{ - if (st & 0x80) - return; - ide_dump_status(drive, msg, st); -} - -/* +/** * Returns: * 0: if the request should be continued. - * 1: if the request was ended. + * 1: if the request will be going through error recovery. + * 2: if the request should be ended. */ -static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) +static int cdrom_decode_status(ide_drive_t *drive, u8 stat) { ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; - int stat, err, sense_key; - - /* check for errors */ - stat = hwif->tp_ops->read_status(hwif); - - if (stat_ret) - *stat_ret = stat; - - if (OK_STAT(stat, good_stat, BAD_R_STAT)) - return 0; + int err, sense_key, do_end_request = 0; /* get the IDE error register */ err = ide_read_error(drive); sense_key = err >> 4; - if (rq == NULL) { - printk(KERN_ERR PFX "%s: missing rq in %s\n", - drive->name, __func__); - return 1; - } + ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, rq->cmd_type: 0x%x, err: 0x%x, " + "stat 0x%x", + rq->cmd[0], rq->cmd_type, err, stat); - ide_debug_log(IDE_DBG_RQ, "%s: stat: 0x%x, good_stat: 0x%x, " - "rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x, err: 0x%x\n", - __func__, stat, good_stat, rq->cmd[0], rq->cmd_type, err); - - if (blk_sense_request(rq)) { + if (rq->cmd_type == REQ_TYPE_SENSE) { /* * We got an error trying to get sense info from the drive * (probably while trying to recover from a former error). * Just give up. */ rq->cmd_flags |= REQ_FAILED; - cdrom_end_request(drive, 0); - ide_error(drive, "request sense failure", stat); - return 1; + return 2; + } - } else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) { - /* All other functions, except for READ. */ + /* if we have an error, pass CHECK_CONDITION as the SCSI status byte */ + if (rq->cmd_type == REQ_TYPE_BLOCK_PC && !rq->errors) + rq->errors = SAM_STAT_CHECK_CONDITION; - /* - * if we have an error, pass back CHECK_CONDITION as the - * scsi status byte - */ - if (blk_pc_request(rq) && !rq->errors) - rq->errors = SAM_STAT_CHECK_CONDITION; + if (blk_noretry_request(rq)) + do_end_request = 1; - /* check for tray open */ - if (sense_key == NOT_READY) { - cdrom_saw_media_change(drive); - } else if (sense_key == UNIT_ATTENTION) { - /* check for media change */ + switch (sense_key) { + case NOT_READY: + if (rq->cmd_type == REQ_TYPE_FS && rq_data_dir(rq) == WRITE) { + if (ide_cd_breathe(drive, rq)) + return 1; + } else { cdrom_saw_media_change(drive); - return 0; - } else if (sense_key == ILLEGAL_REQUEST && - rq->cmd[0] == GPCMD_START_STOP_UNIT) { - /* - * Don't print error message for this condition-- - * SFF8090i indicates that 5/24/00 is the correct - * response to a request to close the tray if the - * drive doesn't have that capability. - * cdrom_log_sense() knows this! - */ - } else if (!(rq->cmd_flags & REQ_QUIET)) { - /* otherwise, print an error */ - ide_dump_status(drive, "packet command error", stat); + + if (rq->cmd_type == REQ_TYPE_FS && + !(rq->cmd_flags & REQ_QUIET)) + printk(KERN_ERR PFX "%s: tray open\n", + drive->name); } + do_end_request = 1; + break; + case UNIT_ATTENTION: + cdrom_saw_media_change(drive); - rq->cmd_flags |= REQ_FAILED; + if (rq->cmd_type != REQ_TYPE_FS) + return 0; /* - * instead of playing games with moving completions around, - * remove failed request completely and end it when the - * request sense has completed + * Arrange to retry the request but be sure to give up if we've + * retried too many times. */ - goto end_request; - - } else if (blk_fs_request(rq)) { - int do_end_request = 0; - - /* handle errors from READ and WRITE requests */ - - if (blk_noretry_request(rq)) - do_end_request = 1; - - if (sense_key == NOT_READY) { - /* tray open */ - if (rq_data_dir(rq) == READ) { - cdrom_saw_media_change(drive); - - /* fail the request */ - printk(KERN_ERR PFX "%s: tray open\n", - drive->name); - do_end_request = 1; - } else { - struct cdrom_info *info = drive->driver_data; - - /* - * Allow the drive 5 seconds to recover, some - * devices will return this error while flushing - * data from cache. - */ - if (!rq->errors) - info->write_timeout = jiffies + - ATAPI_WAIT_WRITE_BUSY; - rq->errors = 1; - if (time_after(jiffies, info->write_timeout)) - do_end_request = 1; - else { - struct request_queue *q = drive->queue; - unsigned long flags; - - /* - * take a breather relying on the unplug - * timer to kick us again - */ - spin_lock_irqsave(q->queue_lock, flags); - blk_plug_device(q); - spin_unlock_irqrestore(q->queue_lock, flags); - - return 1; - } - } - } else if (sense_key == UNIT_ATTENTION) { - /* media change */ - cdrom_saw_media_change(drive); - - /* - * Arrange to retry the request but be sure to give up - * if we've retried too many times. - */ - if (++rq->errors > ERROR_MAX) - do_end_request = 1; - } else if (sense_key == ILLEGAL_REQUEST || - sense_key == DATA_PROTECT) { - /* - * No point in retrying after an illegal request or data - * protect error. - */ - ide_dump_status_no_sense(drive, "command error", stat); - do_end_request = 1; - } else if (sense_key == MEDIUM_ERROR) { - /* - * No point in re-trying a zillion times on a bad - * sector. If we got here the error is not correctable. - */ - ide_dump_status_no_sense(drive, - "media error (bad sector)", - stat); - do_end_request = 1; - } else if (sense_key == BLANK_CHECK) { - /* disk appears blank ?? */ - ide_dump_status_no_sense(drive, "media error (blank)", - stat); + if (++rq->errors > ERROR_MAX) do_end_request = 1; - } else if ((err & ~ATA_ABORTED) != 0) { + break; + case ILLEGAL_REQUEST: + /* + * Don't print error message for this condition -- SFF8090i + * indicates that 5/24/00 is the correct response to a request + * to close the tray if the drive doesn't have that capability. + * + * cdrom_log_sense() knows this! + */ + if (rq->cmd[0] == GPCMD_START_STOP_UNIT) + break; + /* fall-through */ + case DATA_PROTECT: + /* + * No point in retrying after an illegal request or data + * protect error. + */ + if (!(rq->cmd_flags & REQ_QUIET)) + ide_dump_status(drive, "command error", stat); + do_end_request = 1; + break; + case MEDIUM_ERROR: + /* + * No point in re-trying a zillion times on a bad sector. + * If we got here the error is not correctable. + */ + if (!(rq->cmd_flags & REQ_QUIET)) + ide_dump_status(drive, "media error " + "(bad sector)", stat); + do_end_request = 1; + break; + case BLANK_CHECK: + /* disk appears blank? */ + if (!(rq->cmd_flags & REQ_QUIET)) + ide_dump_status(drive, "media error (blank)", + stat); + do_end_request = 1; + break; + default: + if (rq->cmd_type != REQ_TYPE_FS) + break; + if (err & ~ATA_ABORTED) { /* go to the default handler for other errors */ ide_error(drive, "cdrom_decode_status", stat); return 1; - } else if ((++rq->errors > ERROR_MAX)) { + } else if (++rq->errors > ERROR_MAX) /* we've racked up too many retries, abort */ do_end_request = 1; - } - - /* - * End a request through request sense analysis when we have - * sense data. We need this in order to perform end of media - * processing. - */ - if (do_end_request) - goto end_request; + } - /* - * If we got a CHECK_CONDITION status, queue - * a request sense command. - */ - if (stat & ATA_ERR) - cdrom_queue_request_sense(drive, NULL, NULL); - } else { - blk_dump_rq_flags(rq, PFX "bad rq"); - cdrom_end_request(drive, 0); + if (rq->cmd_type != REQ_TYPE_FS) { + rq->cmd_flags |= REQ_FAILED; + do_end_request = 1; } - /* retry, or handle the next request */ + /* + * End a request through request sense analysis when we have sense data. + * We need this in order to perform end of media processing. + */ + if (do_end_request) + goto end_request; + + /* if we got a CHECK_CONDITION status, queue a request sense command */ + if (stat & ATA_ERR) + return ide_queue_sense_rq(drive, NULL) ? 2 : 1; return 1; end_request: if (stat & ATA_ERR) { - struct request_queue *q = drive->queue; - unsigned long flags; - - spin_lock_irqsave(q->queue_lock, flags); - blkdev_dequeue_request(rq); - spin_unlock_irqrestore(q->queue_lock, flags); - hwif->rq = NULL; - - cdrom_queue_request_sense(drive, rq->sense, rq); + return ide_queue_sense_rq(drive, rq) ? 2 : 1; } else - cdrom_end_request(drive, 0); - - return 1; + return 2; } -/* - * Check the contents of the interrupt reason register from the cdrom - * and attempt to recover if there are problems. Returns 0 if everything's - * ok; nonzero if the request has been terminated. - */ -static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, - int len, int ireason, int rw) +static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd) { - ide_hwif_t *hwif = drive->hwif; + struct request *rq = cmd->rq; - ide_debug_log(IDE_DBG_FUNC, "Call %s, ireason: 0x%x, rw: 0x%x\n", - __func__, ireason, rw); - - /* - * ireason == 0: the drive wants to receive data from us - * ireason == 2: the drive is expecting to transfer data to us - */ - if (ireason == (!rw << 1)) - return 0; - else if (ireason == (rw << 1)) { - - /* whoops... */ - printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n", - drive->name, __func__); - - ide_pad_transfer(drive, rw, len); - } else if (rw == 0 && ireason == 1) { - /* - * Some drives (ASUS) seem to tell us that status info is - * available. Just get it and ignore. - */ - (void)hwif->tp_ops->read_status(hwif); - return 0; - } else { - /* drive wants a command packet, or invalid ireason... */ - printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n", - drive->name, __func__, ireason); - } - - if (rq->cmd_type == REQ_TYPE_ATA_PC) - rq->cmd_flags |= REQ_FAILED; - - cdrom_end_request(drive, 0); - return -1; -} - -/* - * Assume that the drive will always provide data in multiples of at least - * SECTOR_SIZE, as it gets hairy to keep track of the transfers otherwise. - */ -static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) -{ - ide_debug_log(IDE_DBG_FUNC, "Call %s, len: %d\n", __func__, len); - - if ((len % SECTOR_SIZE) == 0) - return 0; - - printk(KERN_ERR PFX "%s: %s: Bad transfer size %d\n", drive->name, - __func__, len); - - if (drive->atapi_flags & IDE_AFLAG_LIMIT_NFRAMES) - printk(KERN_ERR PFX "This drive is not supported by this " - "version of the driver\n"); - else { - printk(KERN_ERR PFX "Trying to limit transfer sizes\n"); - drive->atapi_flags |= IDE_AFLAG_LIMIT_NFRAMES; - } - - return 1; -} - -static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive, - struct request *rq) -{ - ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd_flags: 0x%x\n", __func__, - rq->cmd_flags); - - if (rq_data_dir(rq) == READ) { - unsigned short sectors_per_frame = - queue_hardsect_size(drive->queue) >> SECTOR_BITS; - int nskip = rq->sector & (sectors_per_frame - 1); - - /* - * If the requested sector doesn't start on a frame boundary, - * we must adjust the start of the transfer so that it does, - * and remember to skip the first few sectors. - * - * If the rq->current_nr_sectors field is larger than the size - * of the buffer, it will mean that we're to skip a number of - * sectors equal to the amount by which rq->current_nr_sectors - * is larger than the buffer size. - */ - if (nskip > 0) { - /* sanity check... */ - if (rq->current_nr_sectors != - bio_cur_sectors(rq->bio)) { - printk(KERN_ERR PFX "%s: %s: buffer botch (%u)\n", - drive->name, __func__, - rq->current_nr_sectors); - cdrom_end_request(drive, 0); - return ide_stopped; - } - rq->current_nr_sectors += nskip; - } - } - - /* set up the command */ - rq->timeout = ATAPI_WAIT_PC; - - return ide_started; -} - -/* - * Fix up a possibly partially-processed request so that we can start it over - * entirely, or even put it back on the request queue. - */ -static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq) -{ - - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); - - if (rq->buffer != bio_data(rq->bio)) { - sector_t n = - (rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE; - - rq->buffer = bio_data(rq->bio); - rq->nr_sectors += n; - rq->sector -= n; - } - rq->current_nr_sectors = bio_cur_sectors(rq->bio); - rq->hard_cur_sectors = rq->current_nr_sectors; - rq->hard_nr_sectors = rq->nr_sectors; - rq->hard_sector = rq->sector; - rq->q->prep_rq_fn(rq->q, rq); -} - -static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct request *rq) -{ - ide_debug_log(IDE_DBG_FUNC, "Call %s, rq->cmd[0]: 0x%x\n", - __func__, rq->cmd[0]); + ide_debug_log(IDE_DBG_FUNC, "rq->cmd[0]: 0x%x", rq->cmd[0]); /* * Some of the trailing request sense fields are optional, * and some drives don't send them. Sigh. */ if (rq->cmd[0] == GPCMD_REQUEST_SENSE && - rq->data_len > 0 && rq->data_len <= 5) - while (rq->data_len > 0) { - *(u8 *)rq->data++ = 0; - --rq->data_len; - } + cmd->nleft > 0 && cmd->nleft <= 5) + cmd->nleft = 0; } int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, @@ -676,9 +432,9 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, if (!sense) sense = &local_sense; - ide_debug_log(IDE_DBG_PC, "Call %s, cmd[0]: 0x%x, write: 0x%x, " - "timeout: %d, cmd_flags: 0x%x\n", __func__, cmd[0], write, - timeout, cmd_flags); + ide_debug_log(IDE_DBG_PC, "cmd[0]: 0x%x, write: 0x%x, timeout: %d, " + "cmd_flags: 0x%x", + cmd[0], write, timeout, cmd_flags); /* start of retry loop */ do { @@ -693,14 +449,18 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, rq->cmd_flags |= cmd_flags; rq->timeout = timeout; if (buffer) { - rq->data = buffer; - rq->data_len = *bufflen; + error = blk_rq_map_kern(drive->queue, rq, buffer, + *bufflen, GFP_NOIO); + if (error) { + blk_put_request(rq); + return error; + } } error = blk_execute_rq(drive->queue, info->disk, rq, 0); if (buffer) - *bufflen = rq->data_len; + *bufflen = rq->resid_len; flags = rq->cmd_flags; blk_put_request(rq); @@ -741,35 +501,45 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, } /* - * Called from blk_end_request_callback() after the data of the request is - * completed and before the request itself is completed. By returning value '1', - * blk_end_request_callback() returns immediately without completing it. + * returns true if rq has been completed */ -static int cdrom_newpc_intr_dummy_cb(struct request *rq) +static bool ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd) { - return 1; + unsigned int nr_bytes = cmd->nbytes - cmd->nleft; + + if (cmd->tf_flags & IDE_TFLAG_WRITE) + nr_bytes -= cmd->last_xfer_len; + + if (nr_bytes > 0) { + ide_complete_rq(drive, 0, nr_bytes); + return true; + } + + return false; } static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; + struct ide_cmd *cmd = &hwif->cmd; struct request *rq = hwif->rq; - xfer_func_t *xferfunc; ide_expiry_t *expiry = NULL; - int dma_error = 0, dma, stat, thislen, uptodate = 0; - int write = (rq_data_dir(rq) == WRITE) ? 1 : 0; + int dma_error = 0, dma, thislen, uptodate = 0; + int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0; + int sense = (rq->cmd_type == REQ_TYPE_SENSE); unsigned int timeout; u16 len; - u8 ireason; + u8 ireason, stat; - ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x\n", - __func__, rq->cmd[0], write); + ide_debug_log(IDE_DBG_PC, "cmd: 0x%x, write: 0x%x", rq->cmd[0], write); /* check for errors */ dma = drive->dma; if (dma) { drive->dma = 0; + drive->waiting_for_dma = 0; dma_error = hwif->dma_ops->dma_end(drive); + ide_dma_unmap_sg(drive, cmd); if (dma_error) { printk(KERN_ERR PFX "%s: DMA %s error\n", drive->name, write ? "write" : "read"); @@ -777,193 +547,153 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) } } - if (cdrom_decode_status(drive, 0, &stat)) - return ide_stopped; + /* check status */ + stat = hwif->tp_ops->read_status(hwif); + + if (!OK_STAT(stat, 0, BAD_R_STAT)) { + rc = cdrom_decode_status(drive, stat); + if (rc) { + if (rc == 2) + goto out_end; + return ide_stopped; + } + } /* using dma, transfer is complete now */ if (dma) { if (dma_error) return ide_error(drive, "dma error", stat); - if (blk_fs_request(rq)) { - ide_end_request(drive, 1, rq->nr_sectors); - return ide_stopped; - } - goto end_request; + uptodate = 1; + goto out_end; } ide_read_bcount_and_ireason(drive, &len, &ireason); - thislen = blk_fs_request(rq) ? len : rq->data_len; + thislen = (rq->cmd_type == REQ_TYPE_FS) ? len : cmd->nleft; if (thislen > len) thislen = len; - ide_debug_log(IDE_DBG_PC, "%s: DRQ: stat: 0x%x, thislen: %d\n", - __func__, stat, thislen); + ide_debug_log(IDE_DBG_PC, "DRQ: stat: 0x%x, thislen: %d", + stat, thislen); /* If DRQ is clear, the command has completed. */ if ((stat & ATA_DRQ) == 0) { - if (blk_fs_request(rq)) { + if (rq->cmd_type == REQ_TYPE_FS) { /* * If we're not done reading/writing, complain. * Otherwise, complete the command normally. */ uptodate = 1; - if (rq->current_nr_sectors > 0) { + if (cmd->nleft > 0) { printk(KERN_ERR PFX "%s: %s: data underrun " - "(%d blocks)\n", - drive->name, __func__, - rq->current_nr_sectors); + "(%u bytes)\n", drive->name, __func__, + cmd->nleft); if (!write) rq->cmd_flags |= REQ_FAILED; uptodate = 0; } - cdrom_end_request(drive, uptodate); - return ide_stopped; - } else if (!blk_pc_request(rq)) { - ide_cd_request_sense_fixup(drive, rq); - /* complain if we still have data left to transfer */ - uptodate = rq->data_len ? 0 : 1; - } - goto end_request; - } - - /* check which way to transfer data */ - if (ide_cd_check_ireason(drive, rq, len, ireason, write)) - return ide_stopped; + } else if (rq->cmd_type != REQ_TYPE_BLOCK_PC) { + ide_cd_request_sense_fixup(drive, cmd); - if (blk_fs_request(rq)) { - if (write == 0) { - int nskip; - - if (ide_cd_check_transfer_size(drive, len)) { - cdrom_end_request(drive, 0); - return ide_stopped; - } + uptodate = cmd->nleft ? 0 : 1; /* - * First, figure out if we need to bit-bucket - * any of the leading sectors. + * suck out the remaining bytes from the drive in an + * attempt to complete the data xfer. (see BZ#13399) */ - nskip = min_t(int, rq->current_nr_sectors - - bio_cur_sectors(rq->bio), - thislen >> 9); - if (nskip > 0) { - ide_pad_transfer(drive, write, nskip << 9); - rq->current_nr_sectors -= nskip; - thislen -= (nskip << 9); + if (!(stat & ATA_ERR) && !uptodate && thislen) { + ide_pio_bytes(drive, cmd, write, thislen); + uptodate = cmd->nleft ? 0 : 1; } + + if (!uptodate) + rq->cmd_flags |= REQ_FAILED; } + goto out_end; } - if (ireason == 0) { - write = 1; - xferfunc = hwif->tp_ops->output_data; - } else { - write = 0; - xferfunc = hwif->tp_ops->input_data; - } + rc = ide_check_ireason(drive, rq, len, ireason, write); + if (rc) + goto out_end; + + cmd->last_xfer_len = 0; - ide_debug_log(IDE_DBG_PC, "%s: data transfer, rq->cmd_type: 0x%x, " - "ireason: 0x%x\n", __func__, rq->cmd_type, ireason); + ide_debug_log(IDE_DBG_PC, "data transfer, rq->cmd_type: 0x%x, " + "ireason: 0x%x", + rq->cmd_type, ireason); /* transfer data */ while (thislen > 0) { - u8 *ptr = blk_fs_request(rq) ? NULL : rq->data; - int blen = rq->data_len; - - /* bio backed? */ - if (rq->bio) { - if (blk_fs_request(rq)) { - ptr = rq->buffer; - blen = rq->current_nr_sectors << 9; - } else { - ptr = bio_data(rq->bio); - blen = bio_iovec(rq->bio)->bv_len; - } - } + int blen = min_t(int, thislen, cmd->nleft); - if (!ptr) { - if (blk_fs_request(rq) && !write) - /* - * If the buffers are full, pipe the rest into - * oblivion. - */ - ide_pad_transfer(drive, 0, thislen); - else { - printk(KERN_ERR PFX "%s: confused, missing data\n", - drive->name); - blk_dump_rq_flags(rq, rq_data_dir(rq) - ? "cdrom_newpc_intr, write" - : "cdrom_newpc_intr, read"); - } + if (cmd->nleft == 0) break; - } - - if (blen > thislen) - blen = thislen; - xferfunc(drive, NULL, ptr, blen); + ide_pio_bytes(drive, cmd, write, blen); + cmd->last_xfer_len += blen; thislen -= blen; len -= blen; - if (blk_fs_request(rq)) { - rq->buffer += blen; - rq->nr_sectors -= (blen >> 9); - rq->current_nr_sectors -= (blen >> 9); - rq->sector += (blen >> 9); - - if (rq->current_nr_sectors == 0 && rq->nr_sectors) - cdrom_end_request(drive, 1); - } else { - rq->data_len -= blen; - - /* - * The request can't be completed until DRQ is cleared. - * So complete the data, but don't complete the request - * using the dummy function for the callback feature - * of blk_end_request_callback(). - */ - if (rq->bio) - blk_end_request_callback(rq, 0, blen, - cdrom_newpc_intr_dummy_cb); - else - rq->data += blen; - } - if (!write && blk_sense_request(rq)) + if (sense && write == 0) rq->sense_len += blen; } /* pad, if necessary */ - if (!blk_fs_request(rq) && len > 0) - ide_pad_transfer(drive, write, len); + if (len > 0) { + if (rq->cmd_type != REQ_TYPE_FS || write == 0) + ide_pad_transfer(drive, write, len); + else { + printk(KERN_ERR PFX "%s: confused, missing data\n", + drive->name); + blk_dump_rq_flags(rq, "cdrom_newpc_intr"); + } + } - if (blk_pc_request(rq)) { + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { timeout = rq->timeout; } else { timeout = ATAPI_WAIT_PC; - if (!blk_fs_request(rq)) + if (rq->cmd_type != REQ_TYPE_FS) expiry = ide_cd_expiry; } - ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry); + hwif->expiry = expiry; + ide_set_handler(drive, cdrom_newpc_intr, timeout); return ide_started; -end_request: - if (blk_pc_request(rq)) { - unsigned int dlen = rq->data_len; +out_end: + if (rq->cmd_type == REQ_TYPE_BLOCK_PC && rc == 0) { + rq->resid_len = 0; + blk_end_request_all(rq, 0); + hwif->rq = NULL; + } else { + if (sense && uptodate) + ide_cd_complete_failed_rq(drive, rq); - if (dma) - rq->data_len = 0; + if (rq->cmd_type == REQ_TYPE_FS) { + if (cmd->nleft == 0) + uptodate = 1; + } else { + if (uptodate <= 0 && rq->errors == 0) + rq->errors = -EIO; + } - if (blk_end_request(rq, 0, dlen)) - BUG(); + if (uptodate == 0 && rq->bio) + if (ide_cd_error_cmd(drive, cmd)) + return ide_stopped; - hwif->rq = NULL; - } else { - if (!uptodate) - rq->cmd_flags |= REQ_FAILED; - cdrom_end_request(drive, uptodate); + /* make sure it's fully ended */ + if (rq->cmd_type != REQ_TYPE_FS) { + rq->resid_len -= cmd->nbytes - cmd->nleft; + if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE)) + rq->resid_len += cmd->last_xfer_len; + } + + ide_complete_rq(drive, uptodate ? 0 : -EIO, blk_rq_bytes(rq)); + + if (sense && rc == 2) + ide_error(drive, "request sense failure", stat); } return ide_stopped; } @@ -971,53 +701,50 @@ end_request: static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) { struct cdrom_info *cd = drive->driver_data; + struct request_queue *q = drive->queue; int write = rq_data_dir(rq) == WRITE; unsigned short sectors_per_frame = - queue_hardsect_size(drive->queue) >> SECTOR_BITS; + queue_logical_block_size(q) >> SECTOR_BITS; - ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, " - "secs_per_frame: %u\n", - __func__, rq->cmd[0], write, sectors_per_frame); + ide_debug_log(IDE_DBG_RQ, "rq->cmd[0]: 0x%x, rq->cmd_flags: 0x%x, " + "secs_per_frame: %u", + rq->cmd[0], rq->cmd_flags, sectors_per_frame); if (write) { /* disk has become write protected */ - if (get_disk_ro(cd->disk)) { - cdrom_end_request(drive, 0); + if (get_disk_ro(cd->disk)) return ide_stopped; - } } else { /* * We may be retrying this request after an error. Fix up any * weirdness which might be present in the request packet. */ - ide_cd_restore_request(drive, rq); + q->prep_rq_fn(q, rq); } - /* use DMA, if possible / writes *must* be hardware frame aligned */ - if ((rq->nr_sectors & (sectors_per_frame - 1)) || - (rq->sector & (sectors_per_frame - 1))) { - if (write) { - cdrom_end_request(drive, 0); - return ide_stopped; - } - drive->dma = 0; - } else - drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); + /* fs requests *must* be hardware frame aligned */ + if ((blk_rq_sectors(rq) & (sectors_per_frame - 1)) || + (blk_rq_pos(rq) & (sectors_per_frame - 1))) + return ide_stopped; + + /* use DMA, if possible */ + drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); if (write) cd->devinfo.media_written = 1; + rq->timeout = ATAPI_WAIT_PC; + return ide_started; } static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) { - ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, " - "rq->cmd_type: 0x%x\n", __func__, rq->cmd[0], - rq->cmd_type); + ide_debug_log(IDE_DBG_PC, "rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x", + rq->cmd[0], rq->cmd_type); - if (blk_pc_request(rq)) + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) rq->cmd_flags |= REQ_QUIET; else rq->cmd_flags &= ~REQ_FAILED; @@ -1025,15 +752,10 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) drive->dma = 0; /* sg request */ - if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) { + if (rq->bio) { struct request_queue *q = drive->queue; + char *buf = bio_data(rq->bio); unsigned int alignment; - char *buf; - - if (rq->bio) - buf = bio_data(rq->bio); - else - buf = rq->data; drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); @@ -1045,7 +767,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) */ alignment = queue_dma_alignment(q) | q->dma_pad_mask; if ((unsigned long)buf & alignment - || rq->data_len & q->dma_pad_mask + || blk_rq_bytes(rq) & q->dma_pad_mask || object_is_on_stack(buf)) drive->dma = 0; } @@ -1054,34 +776,62 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { - ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, " - "rq->cmd_type: 0x%x, block: %llu\n", - __func__, rq->cmd[0], rq->cmd_type, - (unsigned long long)block); + struct ide_cmd cmd; + int uptodate = 0; + unsigned int nsectors; - if (blk_fs_request(rq)) { - if (cdrom_start_rw(drive, rq) == ide_stopped) - return ide_stopped; + ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, block: %llu", + rq->cmd[0], (unsigned long long)block); - if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped) - return ide_stopped; - } else if (blk_sense_request(rq) || blk_pc_request(rq) || - rq->cmd_type == REQ_TYPE_ATA_PC) { + if (drive->debug_mask & IDE_DBG_RQ) + blk_dump_rq_flags(rq, "ide_cd_do_request"); + + switch (rq->cmd_type) { + case REQ_TYPE_FS: + if (cdrom_start_rw(drive, rq) == ide_stopped) + goto out_end; + break; + case REQ_TYPE_SENSE: + case REQ_TYPE_BLOCK_PC: + case REQ_TYPE_ATA_PC: if (!rq->timeout) rq->timeout = ATAPI_WAIT_PC; cdrom_do_block_pc(drive, rq); - } else if (blk_special_request(rq)) { + break; + case REQ_TYPE_SPECIAL: /* right now this can only be a reset... */ - cdrom_end_request(drive, 1); - return ide_stopped; - } else { - blk_dump_rq_flags(rq, DRV_NAME " bad flags"); - cdrom_end_request(drive, 0); - return ide_stopped; + uptodate = 1; + goto out_end; + default: + BUG(); } - return ide_issue_pc(drive); + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); + + memset(&cmd, 0, sizeof(cmd)); + + if (rq_data_dir(rq)) + cmd.tf_flags |= IDE_TFLAG_WRITE; + + cmd.rq = rq; + + if (rq->cmd_type == REQ_TYPE_FS || blk_rq_bytes(rq)) { + ide_init_sg_cmd(&cmd, blk_rq_bytes(rq)); + ide_map_sg(drive, &cmd); + } + + return ide_issue_pc(drive, &cmd); +out_end: + nsectors = blk_rq_sectors(rq); + + if (nsectors == 0) + nsectors = 1; + + ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9); + + return ide_stopped; } /* @@ -1106,7 +856,7 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) struct cdrom_device_info *cdi = &info->devinfo; unsigned char cmd[BLK_MAX_CDB]; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); memset(cmd, 0, BLK_MAX_CDB); cmd[0] = GPCMD_TEST_UNIT_READY; @@ -1134,7 +884,7 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, unsigned len = sizeof(capbuf); u32 blocklen; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); memset(cmd, 0, BLK_MAX_CDB); cmd[0] = GPCMD_READ_CDVD_CAPACITY; @@ -1145,9 +895,12 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, return stat; /* - * Sanity check the given block size + * Sanity check the given block size, in so far as making + * sure the sectors_per_frame we give to the caller won't + * end up being bogus. */ blocklen = be32_to_cpu(capbuf.blocklen); + blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS; switch (blocklen) { case 512: case 1024: @@ -1155,10 +908,9 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, case 4096: break; default: - printk(KERN_ERR PFX "%s: weird block size %u\n", + printk_once(KERN_ERR PFX "%s: weird block size %u; " + "setting default block size to 2048\n", drive->name, blocklen); - printk(KERN_ERR PFX "%s: default to 2kb block size\n", - drive->name); blocklen = 2048; break; } @@ -1166,8 +918,8 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, *capacity = 1 + be32_to_cpu(capbuf.lba); *sectors_per_frame = blocklen >> SECTOR_BITS; - ide_debug_log(IDE_DBG_PROBE, "%s: cap: %lu, sectors_per_frame: %lu\n", - __func__, *capacity, *sectors_per_frame); + ide_debug_log(IDE_DBG_PROBE, "cap: %lu, sectors_per_frame: %lu", + *capacity, *sectors_per_frame); return 0; } @@ -1178,7 +930,7 @@ static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag, { unsigned char cmd[BLK_MAX_CDB]; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); memset(cmd, 0, BLK_MAX_CDB); @@ -1208,7 +960,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) long last_written; unsigned long sectors_per_frame = SECTORS_PER_FRAME; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); if (toc == NULL) { /* try to allocate space */ @@ -1240,8 +992,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) /* save a private copy of the TOC capacity for error handling */ drive->probed_capacity = toc->capacity * sectors_per_frame; - blk_queue_hardsect_size(drive->queue, - sectors_per_frame << SECTOR_BITS); + blk_queue_logical_block_size(drive->queue, + sectors_per_frame << SECTOR_BITS); /* first read just the header, so we know how long the TOC is */ stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr, @@ -1370,7 +1122,7 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf) struct packet_command cgc; int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0) size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE; @@ -1390,7 +1142,7 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf) struct cdrom_info *cd = drive->driver_data; u16 curspeed, maxspeed; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) { curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]); @@ -1400,11 +1152,11 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf) maxspeed = be16_to_cpup((__be16 *)&buf[8 + 8]); } - ide_debug_log(IDE_DBG_PROBE, "%s: curspeed: %u, maxspeed: %u\n", - __func__, curspeed, maxspeed); + ide_debug_log(IDE_DBG_PROBE, "curspeed: %u, maxspeed: %u", + curspeed, maxspeed); - cd->current_speed = (curspeed + (176/2)) / 176; - cd->max_speed = (maxspeed + (176/2)) / 176; + cd->current_speed = DIV_ROUND_CLOSEST(curspeed, 176); + cd->max_speed = DIV_ROUND_CLOSEST(maxspeed, 176); } #define IDE_CD_CAPABILITIES \ @@ -1418,7 +1170,7 @@ static struct cdrom_device_ops ide_cdrom_dops = { .open = ide_cdrom_open_real, .release = ide_cdrom_release_real, .drive_status = ide_cdrom_drive_status, - .media_changed = ide_cdrom_check_media_change_real, + .check_events = ide_cdrom_check_events_real, .tray_move = ide_cdrom_tray_move, .lock_door = ide_cdrom_lock_door, .select_speed = ide_cdrom_select_speed, @@ -1435,7 +1187,7 @@ static int ide_cdrom_register(ide_drive_t *drive, int nslots) struct cdrom_info *info = drive->driver_data; struct cdrom_device_info *devinfo = &info->devinfo; - ide_debug_log(IDE_DBG_PROBE, "Call %s, nslots: %d\n", __func__, nslots); + ide_debug_log(IDE_DBG_PROBE, "nslots: %d", nslots); devinfo->ops = &ide_cdrom_dops; devinfo->speed = info->current_speed; @@ -1458,9 +1210,8 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) mechtype_t mechtype; int nslots = 1; - ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->media: 0x%x, " - "drive->atapi_flags: 0x%lx\n", __func__, drive->media, - drive->atapi_flags); + ide_debug_log(IDE_DBG_PROBE, "media: 0x%x, atapi_flags: 0x%lx", + drive->media, drive->atapi_flags); cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO | @@ -1558,9 +1309,9 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) /* standard prep_rq_fn that builds 10 byte cmds */ static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq) { - int hard_sect = queue_hardsect_size(q); - long block = (long)rq->hard_sector / (hard_sect >> 9); - unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9); + int hard_sect = queue_logical_block_size(q); + long block = (long)blk_rq_pos(rq) / (hard_sect >> 9); + unsigned long blocks = blk_rq_sectors(rq) / (hard_sect >> 9); memset(rq->cmd, 0, BLK_MAX_CDB); @@ -1622,9 +1373,9 @@ static int ide_cdrom_prep_pc(struct request *rq) static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq) { - if (blk_fs_request(rq)) + if (rq->cmd_type == REQ_TYPE_FS) return ide_cdrom_prep_fs(q, rq); - else if (blk_pc_request(rq)) + else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) return ide_cdrom_prep_pc(rq); return 0; @@ -1647,19 +1398,30 @@ static sector_t ide_cdrom_capacity(ide_drive_t *drive) return capacity * sectors_per_frame; } -static int proc_idecd_read_capacity(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int idecd_capacity_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = data; - int len; + ide_drive_t *drive = m->private; - len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive)); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%llu\n", (long long)ide_cdrom_capacity(drive)); + return 0; } +static int idecd_capacity_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idecd_capacity_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations idecd_capacity_proc_fops = { + .owner = THIS_MODULE, + .open = idecd_capacity_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static ide_proc_entry_t idecd_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL }, - { NULL, 0, NULL, NULL } + { "capacity", S_IFREG|S_IRUGO, &idecd_capacity_proc_fops }, + {} }; static ide_proc_entry_t *ide_cd_proc_entries(ide_drive_t *drive) @@ -1674,9 +1436,6 @@ static const struct ide_proc_devset *ide_cd_proc_devsets(ide_drive_t *drive) #endif static const struct cd_list_entry ide_cd_quirks_list[] = { - /* Limit transfer size per interrupt. */ - { "SAMSUNG CD-ROM SCR-2430", NULL, IDE_AFLAG_LIMIT_NFRAMES }, - { "SAMSUNG CD-ROM SCR-2432", NULL, IDE_AFLAG_LIMIT_NFRAMES }, /* SCR-3231 doesn't support the SET_CD_SPEED command. */ { "SAMSUNG CD-ROM SCR-3231", NULL, IDE_AFLAG_NO_SPEED_SELECT }, /* Old NEC260 (not R) was released before ATAPI 1.2 spec. */ @@ -1737,18 +1496,16 @@ static int ide_cdrom_setup(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; + struct request_queue *q = drive->queue; u16 *id = drive->id; char *fw_rev = (char *)&id[ATA_ID_FW_REV]; int nslots; - ide_debug_log(IDE_DBG_PROBE, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_PROBE, "enter"); - blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn); - blk_queue_dma_alignment(drive->queue, 31); - blk_queue_update_dma_pad(drive->queue, 15); - drive->queue->unplug_delay = (1 * HZ) / 1000; - if (!drive->queue->unplug_delay) - drive->queue->unplug_delay = 1; + blk_queue_prep_rq(q, ide_cdrom_prep_fn); + blk_queue_dma_alignment(q, 31); + blk_queue_update_dma_pad(q, 15); drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED; drive->atapi_flags = IDE_AFLAG_NO_EJECT | ide_cd_flags(id); @@ -1766,8 +1523,7 @@ static int ide_cdrom_setup(ide_drive_t *drive) nslots = ide_cdrom_probe_capabilities(drive); - /* set correct block size */ - blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE); + blk_queue_logical_block_size(q, CD_FRAMESIZE); if (ide_cdrom_register(drive, nslots)) { printk(KERN_ERR PFX "%s: %s failed to register device with the" @@ -1784,23 +1540,25 @@ static void ide_cd_remove(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); ide_proc_unregister_driver(drive, info->driver); - + device_del(&info->dev); del_gendisk(info->disk); - ide_cd_put(info); + mutex_lock(&idecd_ref_mutex); + put_device(&info->dev); + mutex_unlock(&idecd_ref_mutex); } -static void ide_cd_release(struct kref *kref) +static void ide_cd_release(struct device *dev) { - struct cdrom_info *info = to_ide_drv(kref, cdrom_info); + struct cdrom_info *info = to_ide_drv(dev, cdrom_info); struct cdrom_device_info *devinfo = &info->devinfo; ide_drive_t *drive = info->drive; struct gendisk *g = info->disk; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); kfree(info->toc); if (devinfo->handle == drive) @@ -1824,7 +1582,6 @@ static struct ide_driver ide_cdrom_driver = { .remove = ide_cd_remove, .version = IDECD_VERSION, .do_request = ide_cd_do_request, - .end_request = ide_end_request, #ifdef CONFIG_IDE_PROC_FS .proc_entries = ide_cd_proc_entries, .proc_devsets = ide_cd_proc_devsets, @@ -1833,29 +1590,31 @@ static struct ide_driver ide_cdrom_driver = { static int idecd_open(struct block_device *bdev, fmode_t mode) { - struct cdrom_info *info = ide_cd_get(bdev->bd_disk); - int rc = -ENOMEM; + struct cdrom_info *info; + int rc = -ENXIO; + mutex_lock(&ide_cd_mutex); + info = ide_cd_get(bdev->bd_disk); if (!info) - return -ENXIO; + goto out; rc = cdrom_open(&info->devinfo, bdev, mode); - if (rc < 0) ide_cd_put(info); - +out: + mutex_unlock(&ide_cd_mutex); return rc; } -static int idecd_release(struct gendisk *disk, fmode_t mode) +static void idecd_release(struct gendisk *disk, fmode_t mode) { struct cdrom_info *info = ide_drv_g(disk, cdrom_info); + mutex_lock(&ide_cd_mutex); cdrom_release(&info->devinfo, mode); ide_cd_put(info); - - return 0; + mutex_unlock(&ide_cd_mutex); } static int idecd_set_spindown(struct cdrom_device_info *cdi, unsigned long arg) @@ -1897,7 +1656,7 @@ static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg) return 0; } -static int idecd_ioctl(struct block_device *bdev, fmode_t mode, +static int idecd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) { struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info); @@ -1919,10 +1678,24 @@ static int idecd_ioctl(struct block_device *bdev, fmode_t mode, return err; } -static int idecd_media_changed(struct gendisk *disk) +static int idecd_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg) +{ + int ret; + + mutex_lock(&ide_cd_mutex); + ret = idecd_locked_ioctl(bdev, mode, cmd, arg); + mutex_unlock(&ide_cd_mutex); + + return ret; +} + + +static unsigned int idecd_check_events(struct gendisk *disk, + unsigned int clearing) { struct cdrom_info *info = ide_drv_g(disk, cdrom_info); - return cdrom_media_changed(&info->devinfo); + return cdrom_check_events(&info->devinfo, clearing); } static int idecd_revalidate_disk(struct gendisk *disk) @@ -1935,19 +1708,16 @@ static int idecd_revalidate_disk(struct gendisk *disk) return 0; } -static struct block_device_operations idecd_ops = { +static const struct block_device_operations idecd_ops = { .owner = THIS_MODULE, .open = idecd_open, .release = idecd_release, - .locked_ioctl = idecd_ioctl, - .media_changed = idecd_media_changed, + .ioctl = idecd_ioctl, + .check_events = idecd_check_events, .revalidate_disk = idecd_revalidate_disk }; /* module options */ -static char *ignore; -module_param(ignore, charp, 0400); - static unsigned long debug_mask; module_param(debug_mask, ulong, 0644); @@ -1959,9 +1729,8 @@ static int ide_cd_probe(ide_drive_t *drive) struct gendisk *g; struct request_sense sense; - ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->driver_req: %s, " - "drive->media: 0x%x\n", __func__, drive->driver_req, - drive->media); + ide_debug_log(IDE_DBG_PROBE, "driver_req: %s, media: 0x%x", + drive->driver_req, drive->media); if (!strstr("ide-cdrom", drive->driver_req)) goto failed; @@ -1969,15 +1738,6 @@ static int ide_cd_probe(ide_drive_t *drive) if (drive->media != ide_cdrom && drive->media != ide_optical) goto failed; - /* skip drives that we were told to ignore */ - if (ignore != NULL) { - if (strstr(ignore, drive->name)) { - printk(KERN_INFO PFX "ignoring drive %s\n", - drive->name); - goto failed; - } - } - drive->debug_mask = debug_mask; drive->irq_handler = cdrom_newpc_intr; @@ -1994,7 +1754,12 @@ static int ide_cd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&info->kref); + info->dev.parent = &drive->gendev; + info->dev.release = ide_cd_release; + dev_set_name(&info->dev, "%s", dev_name(&drive->gendev)); + + if (device_register(&info->dev)) + goto out_free_disk; info->drive = drive; info->driver = &ide_cdrom_driver; @@ -2008,16 +1773,18 @@ static int ide_cd_probe(ide_drive_t *drive) g->driverfs_dev = &drive->gendev; g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE; if (ide_cdrom_setup(drive)) { - ide_cd_release(&info->kref); + put_device(&info->dev); goto failed; } ide_cd_read_toc(drive, &sense); g->fops = &idecd_ops; - g->flags |= GENHD_FL_REMOVABLE; + g->flags |= GENHD_FL_REMOVABLE | GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE; add_disk(g); return 0; +out_free_disk: + put_disk(g); out_free_cd: kfree(info); failed: diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index ac40d6cb90a..1efc936f5b6 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -11,7 +11,7 @@ #define IDECD_DEBUG_LOG 0 #if IDECD_DEBUG_LOG -#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args) +#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args) #else #define ide_debug_log(lvl, fmt, args...) do {} while (0) #endif @@ -80,19 +80,13 @@ struct cdrom_info { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; /* Buffer for table of contents. NULL if we haven't allocated a TOC buffer for this device yet. */ struct atapi_toc *toc; - /* The result of the last successful request sense command - on this device. */ - struct request_sense sense_data; - - struct request request_sense_request; - u8 max_speed; /* Max speed of the drive. */ u8 current_speed; /* Current speed of the drive. */ @@ -117,7 +111,8 @@ int cdrom_check_status(ide_drive_t *, struct request_sense *); int ide_cdrom_open_real(struct cdrom_device_info *, int); void ide_cdrom_release_real(struct cdrom_device_info *); int ide_cdrom_drive_status(struct cdrom_device_info *, int); -int ide_cdrom_check_media_change_real(struct cdrom_device_info *, int); +unsigned int ide_cdrom_check_events_real(struct cdrom_device_info *, + unsigned int clearing, int slot_nr); int ide_cdrom_tray_move(struct cdrom_device_info *, int); int ide_cdrom_lock_door(struct cdrom_device_info *, int); int ide_cdrom_select_speed(struct cdrom_device_info *, int); diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c index df3df0041eb..02caa7dd51c 100644 --- a/drivers/ide/ide-cd_ioctl.c +++ b/drivers/ide/ide-cd_ioctl.c @@ -8,6 +8,7 @@ #include <linux/kernel.h> #include <linux/cdrom.h> +#include <linux/gfp.h> #include <linux/ide.h> #include <scsi/scsi.h> @@ -78,8 +79,14 @@ int ide_cdrom_drive_status(struct cdrom_device_info *cdi, int slot_nr) return CDS_DRIVE_NOT_READY; } -int ide_cdrom_check_media_change_real(struct cdrom_device_info *cdi, - int slot_nr) +/* + * ide-cd always generates media changed event if media is missing, which + * makes it impossible to use for proper event reporting, so disk->events + * is cleared to 0 and the following function is used only to trigger + * revalidation and never propagated to userland. + */ +unsigned int ide_cdrom_check_events_real(struct cdrom_device_info *cdi, + unsigned int clearing, int slot_nr) { ide_drive_t *drive = cdi->handle; int retval; @@ -88,9 +95,9 @@ int ide_cdrom_check_media_change_real(struct cdrom_device_info *cdi, (void) cdrom_check_status(drive, NULL); retval = (drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED) ? 1 : 0; drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED; - return retval; + return retval ? DISK_EVENT_MEDIA_CHANGE : 0; } else { - return -EINVAL; + return 0; } } @@ -453,7 +460,7 @@ int ide_cdrom_packet(struct cdrom_device_info *cdi, touch it at all. */ if (cgc->data_direction == CGC_DATA_WRITE) - flags |= REQ_RW; + flags |= REQ_WRITE; if (cgc->sense) memset(cgc->sense, 0, sizeof(struct request_sense)); diff --git a/drivers/ide/ide-cd_verbose.c b/drivers/ide/ide-cd_verbose.c index 6490a2dea96..f079ca2f260 100644 --- a/drivers/ide/ide-cd_verbose.c +++ b/drivers/ide/ide-cd_verbose.c @@ -9,7 +9,9 @@ #include <linux/kernel.h> #include <linux/blkdev.h> #include <linux/cdrom.h> +#include <linux/ide.h> #include <scsi/scsi.h> +#include "ide-cd.h" #ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS void ide_cd_log_error(const char *name, struct request *failed_command, diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index f50210fe558..f1e922e2479 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -41,10 +41,7 @@ #include <linux/major.h> #include <linux/delay.h> #include <asm/io.h> -#include <asm/system.h> -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -60,22 +57,12 @@ MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver"); MODULE_LICENSE("Dual MPL/GPL"); -#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) - -#ifdef CONFIG_PCMCIA_DEBUG -INT_MODULE_PARM(pc_debug, 0); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -#else -#define DEBUG(n, args...) -#endif - /*====================================================================*/ typedef struct ide_info_t { struct pcmcia_device *p_dev; struct ide_host *host; - int ndev; - dev_node_t node; + int ndev; } ide_info_t; static void ide_release(struct pcmcia_device *); @@ -83,22 +70,11 @@ static int ide_config(struct pcmcia_device *); static void ide_detach(struct pcmcia_device *p_dev); - - - -/*====================================================================== - - ide_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int ide_probe(struct pcmcia_device *link) { ide_info_t *info; - DEBUG(0, "ide_attach()\n"); + dev_dbg(&link->dev, "ide_attach()\n"); /* Create new ide device */ info = kzalloc(sizeof(*info), GFP_KERNEL); @@ -108,42 +84,20 @@ static int ide_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = 3; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; return ide_config(link); } /* ide_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; - ide_hwif_t *hwif = info->host->ports[0]; - unsigned long data_addr, ctl_addr; - - DEBUG(0, "ide_detach(0x%p)\n", link); - data_addr = hwif->io_ports.data_addr; - ctl_addr = hwif->io_ports.ctl_addr; + dev_dbg(&link->dev, "ide_detach(0x%p)\n", link); ide_release(link); - release_region(ctl_addr, 1); - release_region(data_addr, 8); - kfree(info); } /* ide_detach */ @@ -154,6 +108,8 @@ static const struct ide_port_ops idecs_port_ops = { static const struct ide_port_info idecs_port_info = { .port_ops = &idecs_port_ops, .host_flags = IDE_HFLAG_NO_DMA, + .irq_flags = IRQF_SHARED, + .chipset = ide_pci, }; static struct ide_host *idecs_register(unsigned long io, unsigned long ctl, @@ -162,7 +118,7 @@ static struct ide_host *idecs_register(unsigned long io, unsigned long ctl, struct ide_host *host; ide_hwif_t *hwif; int i, rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; if (!request_region(io, 8, DRV_NAME)) { printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", @@ -180,10 +136,9 @@ static struct ide_host *idecs_register(unsigned long io, unsigned long ctl, memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, io, ctl); hw.irq = irq; - hw.chipset = ide_pci; hw.dev = &handle->dev; - rc = ide_host_add(&idecs_port_info, hws, &host); + rc = ide_host_add(&idecs_port_info, hws, 1, &host); if (rc) goto out_release; @@ -208,105 +163,59 @@ out_release: return NULL; } -/*====================================================================== - - ide_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ide device available to the system. - -======================================================================*/ - -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - -struct pcmcia_config_check { - unsigned long ctl_base; - int skip_vcc; - int is_kme; -}; - -static int pcmcia_check_one_config(struct pcmcia_device *pdev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { - struct pcmcia_config_check *stk = priv_data; - - /* Check for matching Vcc, unless we're desperate */ - if (!stk->skip_vcc) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } - } + int *is_kme = priv_data; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->conf.ConfigIndex = cfg->index; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - return -ENODEV; - stk->ctl_base = pdev->io.BasePort2; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - return -ENODEV; - stk->ctl_base = pdev->io.BasePort1 + 0x0e; - } else + if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH) + != IO_DATA_PATH_WIDTH_8) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + } + pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pdev->resource[1]->end) { + pdev->resource[0]->end = 8; + pdev->resource[1]->end = (*is_kme) ? 2 : 1; + } else { + if (pdev->resource[0]->end < 16) return -ENODEV; - /* If we've got this far, we're done */ - return 0; } - return -ENODEV; + + return pcmcia_request_io(pdev); } static int ide_config(struct pcmcia_device *link) { ide_info_t *info = link->priv; - struct pcmcia_config_check *stk = NULL; - int last_ret = 0, last_fn = 0, is_kme = 0; + int ret = 0, is_kme = 0; unsigned long io_base, ctl_base; struct ide_host *host; - DEBUG(0, "ide_config(0x%p)\n", link); + dev_dbg(&link->dev, "ide_config(0x%p)\n", link); is_kme = ((link->manf_id == MANFID_KME) && ((link->card_id == PRODID_KME_KXLC005_A) || (link->card_id == PRODID_KME_KXLC005_B))); - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) - goto err_mem; - stk->is_kme = is_kme; - stk->skip_vcc = io_base = ctl_base = 0; - - if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) { - stk->skip_vcc = 1; - if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) + if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) { + link->config_flags &= ~CONF_AUTO_CHECK_VCC; + if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) goto failed; /* No suitable config found */ } - io_base = link->io.BasePort1; - ctl_base = stk->ctl_base; + io_base = link->resource[0]->start; + if (link->resource[1]->end) + ctl_base = link->resource[1]->start; + else + ctl_base = link->resource[0]->start + 0x0e; + + if (!link->irq) + goto failed; - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_enable_device(link); + if (ret) + goto failed; /* disable drive interrupts during IDE probe */ outb(0x02, ctl_base); @@ -315,76 +224,55 @@ static int ide_config(struct pcmcia_device *link) if (is_kme) outb(0x81, ctl_base+1); - host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); - if (host == NULL && link->io.NumPorts1 == 0x20) { + host = idecs_register(io_base, ctl_base, link->irq, link); + if (host == NULL && resource_size(link->resource[0]) == 0x20) { outb(0x02, ctl_base + 0x10); host = idecs_register(io_base + 0x10, ctl_base + 0x10, - link->irq.AssignedIRQ, link); + link->irq, link); } if (host == NULL) goto failed; info->ndev = 1; - sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2); - info->node.major = host->ports[0]->major; - info->node.minor = 0; info->host = host; - link->dev_node = &info->node; - printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n", - info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10); + dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n", + 'a' + host->ports[0]->index * 2, + link->vpp / 10, link->vpp % 10); - kfree(stk); return 0; -err_mem: - printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n"); - goto failed; - -cs_failed: - cs_error(link, last_fn, last_ret); failed: - kfree(stk); ide_release(link); return -ENODEV; } /* ide_config */ -/*====================================================================== - - After a card is removed, ide_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ide_release(struct pcmcia_device *link) { ide_info_t *info = link->priv; struct ide_host *host = info->host; - DEBUG(0, "ide_release(0x%p)\n", link); + dev_dbg(&link->dev, "ide_release(0x%p)\n", link); + + if (info->ndev) { + ide_hwif_t *hwif = host->ports[0]; + unsigned long data_addr, ctl_addr; + + data_addr = hwif->io_ports.data_addr; + ctl_addr = hwif->io_ports.ctl_addr; - if (info->ndev) - /* FIXME: if this fails we need to queue the cleanup somehow - -- need to investigate the required PCMCIA magic */ ide_host_remove(host); + info->ndev = 0; - info->ndev = 0; + release_region(ctl_addr, 1); + release_region(data_addr, 8); + } pcmcia_disable_device(link); } /* ide_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the ide drivers from - talking to the ports. - -======================================================================*/ - -static struct pcmcia_device_id ide_ids[] = { +static const struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_FUNC_ID(4), PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ @@ -407,6 +295,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591), PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591), PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591), PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4), PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde), @@ -419,6 +308,8 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), @@ -439,6 +330,8 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), @@ -451,9 +344,7 @@ MODULE_DEVICE_TABLE(pcmcia, ide_ids); static struct pcmcia_driver ide_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ide-cs", - }, + .name = "ide-cs", .probe = ide_probe, .remove = ide_detach, .id_table = ide_ids, diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c new file mode 100644 index 00000000000..9e98122f646 --- /dev/null +++ b/drivers/ide/ide-devsets.c @@ -0,0 +1,191 @@ + +#include <linux/kernel.h> +#include <linux/gfp.h> +#include <linux/ide.h> + +DEFINE_MUTEX(ide_setting_mtx); + +ide_devset_get(io_32bit, io_32bit); + +static int set_io_32bit(ide_drive_t *drive, int arg) +{ + if (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) + return -EPERM; + + if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1)) + return -EINVAL; + + drive->io_32bit = arg; + + return 0; +} + +ide_devset_get_flag(ksettings, IDE_DFLAG_KEEP_SETTINGS); + +static int set_ksettings(ide_drive_t *drive, int arg) +{ + if (arg < 0 || arg > 1) + return -EINVAL; + + if (arg) + drive->dev_flags |= IDE_DFLAG_KEEP_SETTINGS; + else + drive->dev_flags &= ~IDE_DFLAG_KEEP_SETTINGS; + + return 0; +} + +ide_devset_get_flag(using_dma, IDE_DFLAG_USING_DMA); + +static int set_using_dma(ide_drive_t *drive, int arg) +{ +#ifdef CONFIG_BLK_DEV_IDEDMA + int err = -EPERM; + + if (arg < 0 || arg > 1) + return -EINVAL; + + if (ata_id_has_dma(drive->id) == 0) + goto out; + + if (drive->hwif->dma_ops == NULL) + goto out; + + err = 0; + + if (arg) { + if (ide_set_dma(drive)) + err = -EIO; + } else + ide_dma_off(drive); + +out: + return err; +#else + if (arg < 0 || arg > 1) + return -EINVAL; + + return -EPERM; +#endif +} + +/* + * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away + */ +static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio) +{ + switch (req_pio) { + case 202: + case 201: + case 200: + case 102: + case 101: + case 100: + return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0; + case 9: + case 8: + return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0; + case 7: + case 6: + return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0; + default: + return 0; + } +} + +static int set_pio_mode(ide_drive_t *drive, int arg) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (arg < 0 || arg > 255) + return -EINVAL; + + if (port_ops == NULL || port_ops->set_pio_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) + return -ENOSYS; + + if (set_pio_mode_abuse(drive->hwif, arg)) { + drive->pio_mode = arg + XFER_PIO_0; + + if (arg == 8 || arg == 9) { + unsigned long flags; + + /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */ + spin_lock_irqsave(&hwif->lock, flags); + port_ops->set_pio_mode(hwif, drive); + spin_unlock_irqrestore(&hwif->lock, flags); + } else + port_ops->set_pio_mode(hwif, drive); + } else { + int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); + + ide_set_pio(drive, arg); + + if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) { + if (keep_dma) + ide_dma_on(drive); + } + } + + return 0; +} + +ide_devset_get_flag(unmaskirq, IDE_DFLAG_UNMASK); + +static int set_unmaskirq(ide_drive_t *drive, int arg) +{ + if (drive->dev_flags & IDE_DFLAG_NO_UNMASK) + return -EPERM; + + if (arg < 0 || arg > 1) + return -EINVAL; + + if (arg) + drive->dev_flags |= IDE_DFLAG_UNMASK; + else + drive->dev_flags &= ~IDE_DFLAG_UNMASK; + + return 0; +} + +ide_ext_devset_rw_sync(io_32bit, io_32bit); +ide_ext_devset_rw_sync(keepsettings, ksettings); +ide_ext_devset_rw_sync(unmaskirq, unmaskirq); +ide_ext_devset_rw_sync(using_dma, using_dma); +__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode); + +int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting, + int arg) +{ + struct request_queue *q = drive->queue; + struct request *rq; + int ret = 0; + + if (!(setting->flags & DS_SYNC)) + return setting->set(drive, arg); + + rq = blk_get_request(q, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_len = 5; + rq->cmd[0] = REQ_DEVSET_EXEC; + *(int *)&rq->cmd[1] = arg; + rq->special = setting->set; + + if (blk_execute_rq(q, NULL, rq, 0)) + ret = rq->errors; + blk_put_request(rq); + + return ret; +} + +ide_startstop_t ide_do_devset(ide_drive_t *drive, struct request *rq) +{ + int err, (*setfunc)(ide_drive_t *, int) = rq->special; + + err = setfunc(drive, *(int *)&rq->cmd[1]); + if (err) + rq->errors = err; + ide_complete_rq(drive, err, blk_rq_bytes(rq)); + return ide_stopped; +} diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 4088a622873..ee880382e3b 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -28,7 +28,6 @@ #include <linux/mutex.h> #include <linux/leds.h> #include <linux/ide.h> -#include <linux/hdreg.h> #include <asm/byteorder.h> #include <asm/irq.h> @@ -53,33 +52,26 @@ static const u8 ide_rw_cmds[] = { ATA_CMD_WRITE_EXT, }; -static const u8 ide_data_phases[] = { - TASKFILE_MULTI_IN, - TASKFILE_MULTI_OUT, - TASKFILE_IN, - TASKFILE_OUT, - TASKFILE_IN_DMA, - TASKFILE_OUT_DMA, -}; - -static void ide_tf_set_cmd(ide_drive_t *drive, ide_task_t *task, u8 dma) +static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma) { u8 index, lba48, write; - lba48 = (task->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0; - write = (task->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0; + lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0; + write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0; - if (dma) + if (dma) { + cmd->protocol = ATA_PROT_DMA; index = 8; - else - index = drive->mult_count ? 0 : 4; - - task->tf.command = ide_rw_cmds[index + lba48 + write]; - - if (dma) - index = 8; /* fixup index */ + } else { + cmd->protocol = ATA_PROT_PIO; + if (drive->mult_count) { + cmd->tf_flags |= IDE_TFLAG_MULTI_PIO; + index = 0; + } else + index = 4; + } - task->data_phase = ide_data_phases[index / 2 + write]; + cmd->tf.command = ide_rw_cmds[index + lba48 + write]; } /* @@ -90,55 +82,53 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) { ide_hwif_t *hwif = drive->hwif; - u16 nsectors = (u16)rq->nr_sectors; + u16 nsectors = (u16)blk_rq_sectors(rq); u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); - ide_task_t task; - struct ide_taskfile *tf = &task.tf; + struct ide_cmd cmd; + struct ide_taskfile *tf = &cmd.tf; ide_startstop_t rc; if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) { - if (block + rq->nr_sectors > 1ULL << 28) + if (block + blk_rq_sectors(rq) > 1ULL << 28) dma = 0; else lba48 = 0; } - if (!dma) { - ide_init_sg_cmd(drive, rq); - ide_map_sg(drive, rq); - } - - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + memset(&cmd, 0, sizeof(cmd)); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; if (drive->dev_flags & IDE_DFLAG_LBA) { if (lba48) { pr_debug("%s: LBA=0x%012llx\n", drive->name, (unsigned long long)block); - tf->hob_nsect = (nsectors >> 8) & 0xff; - tf->hob_lbal = (u8)(block >> 24); - if (sizeof(block) != 4) { - tf->hob_lbam = (u8)((u64)block >> 32); - tf->hob_lbah = (u8)((u64)block >> 40); - } - tf->nsect = nsectors & 0xff; tf->lbal = (u8) block; tf->lbam = (u8)(block >> 8); tf->lbah = (u8)(block >> 16); + tf->device = ATA_LBA; - task.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); + tf = &cmd.hob; + tf->nsect = (nsectors >> 8) & 0xff; + tf->lbal = (u8)(block >> 24); + if (sizeof(block) != 4) { + tf->lbam = (u8)((u64)block >> 32); + tf->lbah = (u8)((u64)block >> 40); + } + + cmd.valid.out.hob = IDE_VALID_OUT_HOB; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + cmd.tf_flags |= IDE_TFLAG_LBA48; } else { tf->nsect = nsectors & 0xff; tf->lbal = block; tf->lbam = block >>= 8; tf->lbah = block >>= 8; - tf->device = (block >> 8) & 0xf; + tf->device = ((block >> 8) & 0xf) | ATA_LBA; } - - tf->device |= ATA_LBA; } else { unsigned int sect, head, cyl, track; @@ -156,23 +146,27 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->device = head; } + cmd.tf_flags |= IDE_TFLAG_FS; + if (rq_data_dir(rq)) - task.tf_flags |= IDE_TFLAG_WRITE; + cmd.tf_flags |= IDE_TFLAG_WRITE; + + ide_tf_set_cmd(drive, &cmd, dma); + cmd.rq = rq; - ide_tf_set_cmd(drive, &task, dma); - if (!dma) - hwif->data_phase = task.data_phase; - task.rq = rq; + if (dma == 0) { + ide_init_sg_cmd(&cmd, nsectors << 9); + ide_map_sg(drive, &cmd); + } - rc = do_rw_taskfile(drive, &task); + rc = do_rw_taskfile(drive, &cmd); if (rc == ide_stopped && dma) { /* fallback to PIO */ - task.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK; - ide_tf_set_cmd(drive, &task, 0); - hwif->data_phase = task.data_phase; - ide_init_sg_cmd(drive, rq); - rc = do_rw_taskfile(drive, &task); + cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK; + ide_tf_set_cmd(drive, &cmd, 0); + ide_init_sg_cmd(&cmd, nsectors << 9); + rc = do_rw_taskfile(drive, &cmd); } return rc; @@ -190,19 +184,13 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, ide_hwif_t *hwif = drive->hwif; BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED); - - if (!blk_fs_request(rq)) { - blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command"); - ide_end_request(drive, 0, 0); - return ide_stopped; - } + BUG_ON(rq->cmd_type != REQ_TYPE_FS); ledtrig_ide_activity(); - pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n", + pr_debug("%s: %sing: block=%llu, sectors=%u\n", drive->name, rq_data_dir(rq) == READ ? "read" : "writ", - (unsigned long long)block, rq->nr_sectors, - (unsigned long)rq->buffer); + (unsigned long long)block, blk_rq_sectors(rq)); if (hwif->rw_disk) hwif->rw_disk(drive, rq); @@ -216,26 +204,30 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, */ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) { - ide_task_t args; - struct ide_taskfile *tf = &args.tf; + struct ide_cmd cmd; + struct ide_taskfile *tf = &cmd.tf; u64 addr = 0; - /* Create IDE/ATA command request structure */ - memset(&args, 0, sizeof(ide_task_t)); + memset(&cmd, 0, sizeof(cmd)); if (lba48) tf->command = ATA_CMD_READ_NATIVE_MAX_EXT; else tf->command = ATA_CMD_READ_NATIVE_MAX; tf->device = ATA_LBA; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (lba48) - args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); - /* submit command request */ - ide_no_data_taskfile(drive, &args); + + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + if (lba48) { + cmd.valid.out.hob = IDE_VALID_OUT_HOB; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + cmd.tf_flags = IDE_TFLAG_LBA48; + } + + ide_no_data_taskfile(drive, &cmd); /* if OK, compute maximum address value */ - if ((tf->status & 0x01) == 0) - addr = ide_get_lba_addr(tf, lba48) + 1; + if (!(tf->status & ATA_ERR)) + addr = ide_get_lba_addr(&cmd, lba48) + 1; return addr; } @@ -246,34 +238,40 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) */ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) { - ide_task_t args; - struct ide_taskfile *tf = &args.tf; + struct ide_cmd cmd; + struct ide_taskfile *tf = &cmd.tf; u64 addr_set = 0; addr_req--; - /* Create IDE/ATA command request structure */ - memset(&args, 0, sizeof(ide_task_t)); + + memset(&cmd, 0, sizeof(cmd)); tf->lbal = (addr_req >> 0) & 0xff; tf->lbam = (addr_req >>= 8) & 0xff; tf->lbah = (addr_req >>= 8) & 0xff; if (lba48) { - tf->hob_lbal = (addr_req >>= 8) & 0xff; - tf->hob_lbam = (addr_req >>= 8) & 0xff; - tf->hob_lbah = (addr_req >>= 8) & 0xff; + cmd.hob.lbal = (addr_req >>= 8) & 0xff; + cmd.hob.lbam = (addr_req >>= 8) & 0xff; + cmd.hob.lbah = (addr_req >>= 8) & 0xff; tf->command = ATA_CMD_SET_MAX_EXT; } else { tf->device = (addr_req >>= 8) & 0x0f; tf->command = ATA_CMD_SET_MAX; } tf->device |= ATA_LBA; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (lba48) - args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); - /* submit command request */ - ide_no_data_taskfile(drive, &args); + + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + if (lba48) { + cmd.valid.out.hob = IDE_VALID_OUT_HOB; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + cmd.tf_flags = IDE_TFLAG_LBA48; + } + + ide_no_data_taskfile(drive, &cmd); + /* if OK, compute maximum address value */ - if ((tf->status & 0x01) == 0) - addr_set = ide_get_lba_addr(tf, lba48) + 1; + if (!(tf->status & ATA_ERR)) + addr_set = ide_get_lba_addr(&cmd, lba48) + 1; return addr_set; } @@ -296,14 +294,12 @@ static const struct drive_list_entry hpa_list[] = { { NULL, NULL } }; -static void idedisk_check_hpa(ide_drive_t *drive) +static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48) { - unsigned long long capacity, set_max; - int lba48 = ata_id_lba48_enabled(drive->id); + u64 capacity, set_max; capacity = drive->capacity64; - - set_max = idedisk_read_native_max_address(drive, lba48); + set_max = idedisk_read_native_max_address(drive, lba48); if (ide_in_drive_list(drive->id, hpa_list)) { /* @@ -314,9 +310,31 @@ static void idedisk_check_hpa(ide_drive_t *drive) set_max--; } + return set_max; +} + +static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48) +{ + set_max = idedisk_set_max_address(drive, set_max, lba48); + if (set_max) + drive->capacity64 = set_max; + + return set_max; +} + +static void idedisk_check_hpa(ide_drive_t *drive) +{ + u64 capacity, set_max; + int lba48 = ata_id_lba48_enabled(drive->id); + + capacity = drive->capacity64; + set_max = ide_disk_hpa_get_native_capacity(drive, lba48); + if (set_max <= capacity) return; + drive->probed_capacity = set_max; + printk(KERN_INFO "%s: Host Protected Area detected.\n" "\tcurrent capacity is %llu sectors (%llu MB)\n" "\tnative capacity is %llu sectors (%llu MB)\n", @@ -324,13 +342,13 @@ static void idedisk_check_hpa(ide_drive_t *drive) capacity, sectors_to_MB(capacity), set_max, sectors_to_MB(set_max)); - set_max = idedisk_set_max_address(drive, set_max, lba48); + if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0) + return; - if (set_max) { - drive->capacity64 = set_max; + set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48); + if (set_max) printk(KERN_INFO "%s: Host Protected Area disabled.\n", drive->name); - } } static int ide_disk_get_capacity(ide_drive_t *drive) @@ -352,6 +370,8 @@ static int ide_disk_get_capacity(ide_drive_t *drive) drive->capacity64 = drive->cyl * drive->head * drive->sect; } + drive->probed_capacity = drive->capacity64; + if (lba) { drive->dev_flags |= IDE_DFLAG_LBA; @@ -370,7 +390,7 @@ static int ide_disk_get_capacity(ide_drive_t *drive) "%llu sectors (%llu MB)\n", drive->name, (unsigned long long)drive->capacity64, sectors_to_MB(drive->capacity64)); - drive->capacity64 = 1ULL << 28; + drive->probed_capacity = drive->capacity64 = 1ULL << 28; } if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && @@ -386,27 +406,58 @@ static int ide_disk_get_capacity(ide_drive_t *drive) return 0; } -static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) +static void ide_disk_unlock_native_capacity(ide_drive_t *drive) +{ + u16 *id = drive->id; + int lba48 = ata_id_lba48_enabled(id); + + if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 || + ata_id_hpa_enabled(id) == 0) + return; + + /* + * according to the spec the SET MAX ADDRESS command shall be + * immediately preceded by a READ NATIVE MAX ADDRESS command + */ + if (!ide_disk_hpa_get_native_capacity(drive, lba48)) + return; + + if (ide_disk_hpa_set_capacity(drive, drive->probed_capacity, lba48)) + drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */ +} + +static int idedisk_prep_fn(struct request_queue *q, struct request *rq) { ide_drive_t *drive = q->queuedata; - ide_task_t *task = kmalloc(sizeof(*task), GFP_ATOMIC); + struct ide_cmd *cmd; + + if (!(rq->cmd_flags & REQ_FLUSH)) + return BLKPREP_OK; + + if (rq->special) { + cmd = rq->special; + memset(cmd, 0, sizeof(*cmd)); + } else { + cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC); + } /* FIXME: map struct ide_taskfile on rq->cmd[] */ - BUG_ON(task == NULL); + BUG_ON(cmd == NULL); - memset(task, 0, sizeof(*task)); if (ata_id_flush_ext_enabled(drive->id) && (drive->capacity64 >= (1UL << 28))) - task->tf.command = ATA_CMD_FLUSH_EXT; + cmd->tf.command = ATA_CMD_FLUSH_EXT; else - task->tf.command = ATA_CMD_FLUSH; - task->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE | - IDE_TFLAG_DYN; - task->data_phase = TASKFILE_NO_DATA; + cmd->tf.command = ATA_CMD_FLUSH; + cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd->tf_flags = IDE_TFLAG_DYN; + cmd->protocol = ATA_PROT_NODATA; rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->cmd_flags |= REQ_SOFTBARRIER; - rq->special = task; + rq->special = cmd; + cmd->rq = rq; + + return BLKPREP_OK; } ide_devset_get(multcount, mult_count); @@ -423,14 +474,14 @@ static int set_multcount(ide_drive_t *drive, int arg) if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff)) return -EINVAL; - if (drive->special.b.set_multmode) + if (drive->special_flags & IDE_SFLAG_SET_MULTMODE) return -EBUSY; rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_ATA_TASKFILE; drive->mult_req = arg; - drive->special.b.set_multmode = 1; + drive->special_flags |= IDE_SFLAG_SET_MULTMODE; error = blk_execute_rq(drive->queue, NULL, rq, 0); blk_put_request(rq); @@ -456,22 +507,22 @@ static int set_nowerr(ide_drive_t *drive, int arg) static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect) { - ide_task_t task; + struct ide_cmd cmd; - memset(&task, 0, sizeof(task)); - task.tf.feature = feature; - task.tf.nsect = nsect; - task.tf.command = ATA_CMD_SET_FEATURES; - task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + memset(&cmd, 0, sizeof(cmd)); + cmd.tf.feature = feature; + cmd.tf.nsect = nsect; + cmd.tf.command = ATA_CMD_SET_FEATURES; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; - return ide_no_data_taskfile(drive, &task); + return ide_no_data_taskfile(drive, &cmd); } -static void update_ordered(ide_drive_t *drive) +static void update_flush(ide_drive_t *drive) { u16 *id = drive->id; - unsigned ordered = QUEUE_ORDERED_NONE; - prepare_flush_fn *prep_fn = NULL; + unsigned flush = 0; if (drive->dev_flags & IDE_DFLAG_WCACHE) { unsigned long long capacity; @@ -495,13 +546,12 @@ static void update_ordered(ide_drive_t *drive) drive->name, barrier ? "" : "not "); if (barrier) { - ordered = QUEUE_ORDERED_DRAIN_FLUSH; - prep_fn = idedisk_prepare_flush; + flush = REQ_FLUSH; + blk_queue_prep_rq(drive->queue, idedisk_prep_fn); } - } else - ordered = QUEUE_ORDERED_DRAIN; + } - blk_queue_ordered(drive->queue, ordered, prep_fn); + blk_queue_flush(drive->queue, flush); } ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE); @@ -524,22 +574,24 @@ static int set_wcache(ide_drive_t *drive, int arg) } } - update_ordered(drive); + update_flush(drive); return err; } static int do_idedisk_flushcache(ide_drive_t *drive) { - ide_task_t args; + struct ide_cmd cmd; - memset(&args, 0, sizeof(ide_task_t)); + memset(&cmd, 0, sizeof(cmd)); if (ata_id_flush_ext_enabled(drive->id)) - args.tf.command = ATA_CMD_FLUSH_EXT; + cmd.tf.command = ATA_CMD_FLUSH_EXT; else - args.tf.command = ATA_CMD_FLUSH; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - return ide_no_data_taskfile(drive, &args); + cmd.tf.command = ATA_CMD_FLUSH; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + + return ide_no_data_taskfile(drive, &cmd); } ide_devset_get(acoustic, acoustic); @@ -627,13 +679,13 @@ static void ide_disk_setup(ide_drive_t *drive) if (max_s > hwif->rqsize) max_s = hwif->rqsize; - blk_queue_max_sectors(q, max_s); + blk_queue_max_hw_sectors(q, max_s); } printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, - q->max_sectors / 2); + queue_max_sectors(q) / 2); - if (ata_id_is_ssd(id) || ata_id_is_cfa(id)) + if (ata_id_is_ssd(id)) queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); /* calculate drive capacity, and select LBA if possible */ @@ -711,17 +763,18 @@ static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk) static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk, int on) { - ide_task_t task; + struct ide_cmd cmd; int ret; if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) return 0; - memset(&task, 0, sizeof(task)); - task.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; - task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + memset(&cmd, 0, sizeof(cmd)); + cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; - ret = ide_no_data_taskfile(drive, &task); + ret = ide_no_data_taskfile(drive, &cmd); if (ret) drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING; @@ -730,13 +783,13 @@ static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk, } const struct ide_disk_ops ide_ata_disk_ops = { - .check = ide_disk_check, - .get_capacity = ide_disk_get_capacity, - .setup = ide_disk_setup, - .flush = ide_disk_flush, - .init_media = ide_disk_init_media, - .set_doorlock = ide_disk_set_doorlock, - .do_request = ide_do_rw_disk, - .end_request = ide_end_request, - .ioctl = ide_disk_ioctl, + .check = ide_disk_check, + .unlock_native_capacity = ide_disk_unlock_native_capacity, + .get_capacity = ide_disk_get_capacity, + .setup = ide_disk_setup, + .flush = ide_disk_flush, + .init_media = ide_disk_init_media, + .set_doorlock = ide_disk_set_doorlock, + .do_request = ide_do_rw_disk, + .ioctl = ide_disk_ioctl, }; diff --git a/drivers/ide/ide-disk_ioctl.c b/drivers/ide/ide-disk_ioctl.c index 7b783dd7c0b..da36f729ff3 100644 --- a/drivers/ide/ide-disk_ioctl.c +++ b/drivers/ide/ide-disk_ioctl.c @@ -1,9 +1,11 @@ #include <linux/kernel.h> #include <linux/ide.h> #include <linux/hdreg.h> +#include <linux/mutex.h> #include "ide-disk.h" +static DEFINE_MUTEX(ide_disk_ioctl_mutex); static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = { { HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, &ide_devset_address }, { HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, &ide_devset_multcount }, @@ -18,9 +20,13 @@ int ide_disk_ioctl(ide_drive_t *drive, struct block_device *bdev, fmode_t mode, { int err; + mutex_lock(&ide_disk_ioctl_mutex); err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings); if (err != -EOPNOTSUPP) - return err; + goto out; - return generic_ide_ioctl(drive, bdev, cmd, arg); + err = generic_ide_ioctl(drive, bdev, cmd, arg); +out: + mutex_unlock(&ide_disk_ioctl_mutex); + return err; } diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c index 1146f4204c6..0d1fae6cba6 100644 --- a/drivers/ide/ide-disk_proc.c +++ b/drivers/ide/ide-disk_proc.c @@ -1,109 +1,156 @@ #include <linux/kernel.h> #include <linux/ide.h> -#include <linux/hdreg.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/seq_file.h> #include "ide-disk.h" static int smart_enable(ide_drive_t *drive) { - ide_task_t args; - struct ide_taskfile *tf = &args.tf; + struct ide_cmd cmd; + struct ide_taskfile *tf = &cmd.tf; - memset(&args, 0, sizeof(ide_task_t)); + memset(&cmd, 0, sizeof(cmd)); tf->feature = ATA_SMART_ENABLE; tf->lbam = ATA_SMART_LBAM_PASS; tf->lbah = ATA_SMART_LBAH_PASS; tf->command = ATA_CMD_SMART; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - return ide_no_data_taskfile(drive, &args); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + + return ide_no_data_taskfile(drive, &cmd); } static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) { - ide_task_t args; - struct ide_taskfile *tf = &args.tf; + struct ide_cmd cmd; + struct ide_taskfile *tf = &cmd.tf; - memset(&args, 0, sizeof(ide_task_t)); + memset(&cmd, 0, sizeof(cmd)); tf->feature = sub_cmd; tf->nsect = 0x01; tf->lbam = ATA_SMART_LBAM_PASS; tf->lbah = ATA_SMART_LBAH_PASS; tf->command = ATA_CMD_SMART; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - args.data_phase = TASKFILE_IN; - (void) smart_enable(drive); - return ide_raw_taskfile(drive, &args, buf, 1); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.protocol = ATA_PROT_PIO; + + return ide_raw_taskfile(drive, &cmd, buf, 1); } -static int proc_idedisk_read_cache - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int idedisk_cache_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; - char *out = page; - int len; + ide_drive_t *drive = (ide_drive_t *) m->private; if (drive->dev_flags & IDE_DFLAG_ID_READ) - len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2); + seq_printf(m, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2); else - len = sprintf(out, "(none)\n"); + seq_printf(m, "(none)\n"); + return 0; +} - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +static int idedisk_cache_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idedisk_cache_proc_show, PDE_DATA(inode)); } -static int proc_idedisk_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations idedisk_cache_proc_fops = { + .owner = THIS_MODULE, + .open = idedisk_cache_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int idedisk_capacity_proc_show(struct seq_file *m, void *v) { - ide_drive_t*drive = (ide_drive_t *)data; - int len; + ide_drive_t*drive = (ide_drive_t *)m->private; - len = sprintf(page, "%llu\n", (long long)ide_gd_capacity(drive)); + seq_printf(m, "%llu\n", (long long)ide_gd_capacity(drive)); + return 0; +} - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +static int idedisk_capacity_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idedisk_capacity_proc_show, PDE_DATA(inode)); } -static int proc_idedisk_read_smart(char *page, char **start, off_t off, - int count, int *eof, void *data, u8 sub_cmd) +static const struct file_operations idedisk_capacity_proc_fops = { + .owner = THIS_MODULE, + .open = idedisk_capacity_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __idedisk_proc_show(struct seq_file *m, ide_drive_t *drive, u8 sub_cmd) { - ide_drive_t *drive = (ide_drive_t *)data; - int len = 0, i = 0; - - if (get_smart_data(drive, page, sub_cmd) == 0) { - unsigned short *val = (unsigned short *) page; - char *out = (char *)val + SECTOR_SIZE; - - page = out; - do { - out += sprintf(out, "%04x%c", le16_to_cpu(*val), - (++i & 7) ? ' ' : '\n'); - val += 1; - } while (i < SECTOR_SIZE / 2); - len = out - page; + u8 *buf; + + buf = kmalloc(SECTOR_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + (void)smart_enable(drive); + + if (get_smart_data(drive, buf, sub_cmd) == 0) { + __le16 *val = (__le16 *)buf; + int i; + + for (i = 0; i < SECTOR_SIZE / 2; i++) { + seq_printf(m, "%04x%c", le16_to_cpu(val[i]), + (i % 8) == 7 ? '\n' : ' '); + } } + kfree(buf); + return 0; +} - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +static int idedisk_sv_proc_show(struct seq_file *m, void *v) +{ + return __idedisk_proc_show(m, m->private, ATA_SMART_READ_VALUES); } -static int proc_idedisk_read_sv - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int idedisk_sv_proc_open(struct inode *inode, struct file *file) { - return proc_idedisk_read_smart(page, start, off, count, eof, data, - ATA_SMART_READ_VALUES); + return single_open(file, idedisk_sv_proc_show, PDE_DATA(inode)); } -static int proc_idedisk_read_st - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations idedisk_sv_proc_fops = { + .owner = THIS_MODULE, + .open = idedisk_sv_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int idedisk_st_proc_show(struct seq_file *m, void *v) { - return proc_idedisk_read_smart(page, start, off, count, eof, data, - ATA_SMART_READ_THRESHOLDS); + return __idedisk_proc_show(m, m->private, ATA_SMART_READ_THRESHOLDS); } +static int idedisk_st_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idedisk_st_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations idedisk_st_proc_fops = { + .owner = THIS_MODULE, + .open = idedisk_st_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + ide_proc_entry_t ide_disk_proc[] = { - { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, - { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, - { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL }, - { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL }, - { NULL, 0, NULL, NULL } + { "cache", S_IFREG|S_IRUGO, &idedisk_cache_proc_fops }, + { "capacity", S_IFREG|S_IRUGO, &idedisk_capacity_proc_fops }, + { "geometry", S_IFREG|S_IRUGO, &ide_geometry_proc_fops }, + { "smart_values", S_IFREG|S_IRUSR, &idedisk_sv_proc_fops }, + { "smart_thresholds", S_IFREG|S_IRUSR, &idedisk_st_proc_fops }, + {} }; ide_devset_rw_field(bios_cyl, bios_cyl); @@ -125,5 +172,5 @@ const struct ide_proc_devset ide_disk_settings[] = { IDE_PROC_DEVSET(multcount, 0, 16), IDE_PROC_DEVSET(nowerr, 0, 1), IDE_PROC_DEVSET(wcache, 0, 1), - { 0 }, + { NULL }, }; diff --git a/drivers/ide/ide-dma-sff.c b/drivers/ide/ide-dma-sff.c index 123d393658a..289d16c87b8 100644 --- a/drivers/ide/ide-dma-sff.c +++ b/drivers/ide/ide-dma-sff.c @@ -1,5 +1,6 @@ #include <linux/types.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> @@ -38,10 +39,9 @@ int config_drive_for_dma(ide_drive_t *drive) * Enable DMA on any drive that has mode2 DMA * (multi or single) enabled */ - if (id[ATA_ID_FIELD_VALID] & 2) /* regular DMA */ - if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 || - (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404) - return 1; + if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 || + (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404) + return 1; /* Consult the list of known "good" drives */ if (ide_dma_good_drive(drive)) @@ -111,7 +111,7 @@ EXPORT_SYMBOL_GPL(ide_dma_host_set); * May also be invoked from trm290.c */ -int ide_build_dmatable(ide_drive_t *drive, struct request *rq) +int ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; __le32 *table = (__le32 *)hwif->dmatable_cpu; @@ -120,11 +120,7 @@ int ide_build_dmatable(ide_drive_t *drive, struct request *rq) struct scatterlist *sg; u8 is_trm290 = !!(hwif->host_flags & IDE_HFLAG_TRM290); - hwif->sg_nents = ide_build_sglist(drive, rq); - if (hwif->sg_nents == 0) - return 0; - - for_each_sg(hwif->sg_table, sg, hwif->sg_nents, i) { + for_each_sg(hwif->sg_table, sg, cmd->sg_nents, i) { u32 cur_addr, cur_len, xcount, bcount; cur_addr = sg_dma_address(sg); @@ -170,8 +166,6 @@ use_pio_instead: printk(KERN_ERR "%s: %s\n", drive->name, count ? "DMA table too small" : "empty DMA table?"); - ide_destroy_dmatable(drive); - return 0; /* revert to PIO for this request */ } EXPORT_SYMBOL_GPL(ide_build_dmatable); @@ -179,6 +173,7 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable); /** * ide_dma_setup - begin a DMA phase * @drive: target device + * @cmd: command * * Build an IDE DMA PRD (IDE speak for scatter gather table) * and then set up the DMA transfer registers for a device @@ -189,17 +184,16 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable); * is returned. */ -int ide_dma_setup(ide_drive_t *drive) +int ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->rq; - unsigned int reading = rq_data_dir(rq) ? 0 : ATA_DMA_WR; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR; u8 dma_stat; /* fall back to pio! */ - if (!ide_build_dmatable(drive, rq)) { - ide_map_sg(drive, rq); + if (ide_build_dmatable(drive, cmd) == 0) { + ide_map_sg(drive, cmd); return 1; } @@ -212,9 +206,9 @@ int ide_dma_setup(ide_drive_t *drive) /* specify r/w */ if (mmio) - writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); + writeb(rw, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); else - outb(reading, hwif->dma_base + ATA_DMA_CMD); + outb(rw, hwif->dma_base + ATA_DMA_CMD); /* read DMA status for INTR & ERROR flags */ dma_stat = hwif->dma_ops->dma_sff_read_status(hwif); @@ -222,13 +216,12 @@ int ide_dma_setup(ide_drive_t *drive) /* clear INTR & ERROR flags */ ide_dma_sff_write_status(hwif, dma_stat | ATA_DMA_ERR | ATA_DMA_INTR); - drive->waiting_for_dma = 1; return 0; } EXPORT_SYMBOL_GPL(ide_dma_setup); /** - * dma_timer_expiry - handle a DMA timeout + * ide_dma_sff_timer_expiry - handle a DMA timeout * @drive: Drive that timed out * * An IDE DMA transfer timed out. In the event of an error we ask @@ -241,7 +234,7 @@ EXPORT_SYMBOL_GPL(ide_dma_setup); * This can occur if an interrupt is lost or due to hang or bugs. */ -static int dma_timer_expiry(ide_drive_t *drive) +int ide_dma_sff_timer_expiry(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; u8 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif); @@ -265,14 +258,7 @@ static int dma_timer_expiry(ide_drive_t *drive) return 0; /* Status is unknown -- reset the bus */ } - -void ide_dma_exec_cmd(ide_drive_t *drive, u8 command) -{ - /* issue cmd to drive */ - ide_execute_command(drive, command, &ide_dma_intr, 2 * WAIT_CMD, - dma_timer_expiry); -} -EXPORT_SYMBOL_GPL(ide_dma_exec_cmd); +EXPORT_SYMBOL_GPL(ide_dma_sff_timer_expiry); void ide_dma_start(ide_drive_t *drive) { @@ -292,8 +278,6 @@ void ide_dma_start(ide_drive_t *drive) dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); outb(dma_cmd | ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD); } - - wmb(); } EXPORT_SYMBOL_GPL(ide_dma_start); @@ -301,9 +285,7 @@ EXPORT_SYMBOL_GPL(ide_dma_start); int ide_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - u8 dma_stat = 0, dma_cmd = 0, mask; - - drive->waiting_for_dma = 0; + u8 dma_stat = 0, dma_cmd = 0; /* stop DMA */ if (hwif->host_flags & IDE_HFLAG_MMIO) { @@ -321,13 +303,10 @@ int ide_dma_end(ide_drive_t *drive) /* clear INTR & ERROR bits */ ide_dma_sff_write_status(hwif, dma_stat | ATA_DMA_ERR | ATA_DMA_INTR); - /* purge DMA mappings */ - ide_destroy_dmatable(drive); - wmb(); +#define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR) /* verify good DMA status */ - mask = ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR; - if ((dma_stat & mask) != ATA_DMA_INTR) + if ((dma_stat & CHECK_DMA_MASK) != ATA_DMA_INTR) return 0x10 | dma_stat; return 0; } @@ -346,12 +325,11 @@ EXPORT_SYMBOL_GPL(ide_dma_test_irq); const struct ide_dma_ops sff_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, .dma_end = ide_dma_end, .dma_test_irq = ide_dma_test_irq, - .dma_timeout = ide_dma_timeout, .dma_lost_irq = ide_dma_lost_irq, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; EXPORT_SYMBOL_GPL(sff_dma_ops); diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 72ebab0bc75..17a65ac5649 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -29,7 +29,9 @@ */ #include <linux/types.h> +#include <linux/gfp.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> @@ -89,16 +91,21 @@ static const struct drive_list_entry drive_blacklist[] = { ide_startstop_t ide_dma_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; + struct ide_cmd *cmd = &hwif->cmd; u8 stat = 0, dma_stat = 0; + drive->waiting_for_dma = 0; dma_stat = hwif->dma_ops->dma_end(drive); + ide_dma_unmap_sg(drive, cmd); stat = hwif->tp_ops->read_status(hwif); if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat | ATA_DRQ)) { if (!dma_stat) { - struct request *rq = hwif->rq; - - task_end_request(drive, rq, stat); + if ((cmd->tf_flags & IDE_TFLAG_FS) == 0) + ide_finish_cmd(drive, cmd, stat); + else + ide_complete_rq(drive, 0, + blk_rq_sectors(cmd->rq) << 9); return ide_stopped; } printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n", @@ -106,7 +113,6 @@ ide_startstop_t ide_dma_intr(ide_drive_t *drive) } return ide_error(drive, "dma_intr", stat); } -EXPORT_SYMBOL_GPL(ide_dma_intr); int ide_dma_good_drive(ide_drive_t *drive) { @@ -114,9 +120,9 @@ int ide_dma_good_drive(ide_drive_t *drive) } /** - * ide_build_sglist - map IDE scatter gather for DMA I/O - * @drive: the drive to build the DMA table for - * @rq: the request holding the sg list + * ide_dma_map_sg - map IDE scatter gather for DMA I/O + * @drive: the drive to map the DMA table for + * @cmd: command * * Perform the DMA mapping magic necessary to access the source or * target buffers of a request via DMA. The lower layers of the @@ -124,25 +130,28 @@ int ide_dma_good_drive(ide_drive_t *drive) * operate in a portable fashion. */ -int ide_build_sglist(ide_drive_t *drive, struct request *rq) +static int ide_dma_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; + int i; - ide_map_sg(drive, rq); - - if (rq_data_dir(rq) == READ) - hwif->sg_dma_direction = DMA_FROM_DEVICE; + if (cmd->tf_flags & IDE_TFLAG_WRITE) + cmd->sg_dma_direction = DMA_TO_DEVICE; else - hwif->sg_dma_direction = DMA_TO_DEVICE; + cmd->sg_dma_direction = DMA_FROM_DEVICE; - return dma_map_sg(hwif->dev, sg, hwif->sg_nents, - hwif->sg_dma_direction); + i = dma_map_sg(hwif->dev, sg, cmd->sg_nents, cmd->sg_dma_direction); + if (i) { + cmd->orig_sg_nents = cmd->sg_nents; + cmd->sg_nents = i; + } + + return i; } -EXPORT_SYMBOL_GPL(ide_build_sglist); /** - * ide_destroy_dmatable - clean up DMA mapping + * ide_dma_unmap_sg - clean up DMA mapping * @drive: The drive to unmap * * Teardown mappings after DMA has completed. This must be called @@ -152,14 +161,14 @@ EXPORT_SYMBOL_GPL(ide_build_sglist); * time. */ -void ide_destroy_dmatable(ide_drive_t *drive) +void ide_dma_unmap_sg(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; - dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents, - hwif->sg_dma_direction); + dma_unmap_sg(hwif->dev, hwif->sg_table, cmd->orig_sg_nents, + cmd->sg_dma_direction); } -EXPORT_SYMBOL_GPL(ide_destroy_dmatable); +EXPORT_SYMBOL_GPL(ide_dma_unmap_sg); /** * ide_dma_off_quietly - Generic DMA kill @@ -238,12 +247,11 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) case XFER_UDMA_0: if ((id[ATA_ID_FIELD_VALID] & 4) == 0) break; - + mask = id[ATA_ID_UDMA_MODES]; if (port_ops && port_ops->udma_filter) - mask = port_ops->udma_filter(drive); + mask &= port_ops->udma_filter(drive); else - mask = hwif->ultra_mask; - mask &= id[ATA_ID_UDMA_MODES]; + mask &= hwif->ultra_mask; /* * avoid false cable warning from eighty_ninty_three() @@ -254,18 +262,23 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) } break; case XFER_MW_DMA_0: - if ((id[ATA_ID_FIELD_VALID] & 2) == 0) - break; + mask = id[ATA_ID_MWDMA_MODES]; + + /* Also look for the CF specific MWDMA modes... */ + if (ata_id_is_cfa(id) && (id[ATA_ID_CFA_MODES] & 0x38)) { + u8 mode = ((id[ATA_ID_CFA_MODES] & 0x38) >> 3) - 1; + + mask |= ((2 << mode) - 1) << 3; + } + if (port_ops && port_ops->mdma_filter) - mask = port_ops->mdma_filter(drive); + mask &= port_ops->mdma_filter(drive); else - mask = hwif->mwdma_mask; - mask &= id[ATA_ID_MWDMA_MODES]; + mask &= hwif->mwdma_mask; break; case XFER_SW_DMA_0: - if (id[ATA_ID_FIELD_VALID] & 2) { - mask = id[ATA_ID_SWDMA_MODES] & hwif->swdma_mask; - } else if (id[ATA_ID_OLD_DMA_MODES] >> 8) { + mask = id[ATA_ID_SWDMA_MODES]; + if (!(mask & ATA_SWDMA2) && (id[ATA_ID_OLD_DMA_MODES] >> 8)) { u8 mode = id[ATA_ID_OLD_DMA_MODES] >> 8; /* @@ -273,8 +286,9 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) * (the maximum allowed mode is XFER_SW_DMA_2) */ if (mode <= 2) - mask = ((2 << mode) - 1) & hwif->swdma_mask; + mask = (2 << mode) - 1; } + mask &= hwif->swdma_mask; break; default: BUG(); @@ -335,7 +349,6 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode) return mode; } -EXPORT_SYMBOL_GPL(ide_find_dma_mode); static int ide_tune_dma(ide_drive_t *drive) { @@ -350,9 +363,6 @@ static int ide_tune_dma(ide_drive_t *drive) if (__ide_dma_bad_drive(drive)) return 0; - if (ide_id_dma_bug(drive)) - return 0; - if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); @@ -383,25 +393,6 @@ static int ide_dma_check(ide_drive_t *drive) return -1; } -int ide_id_dma_bug(ide_drive_t *drive) -{ - u16 *id = drive->id; - - if (id[ATA_ID_FIELD_VALID] & 4) { - if ((id[ATA_ID_UDMA_MODES] >> 8) && - (id[ATA_ID_MWDMA_MODES] >> 8)) - goto err_out; - } else if (id[ATA_ID_FIELD_VALID] & 2) { - if ((id[ATA_ID_MWDMA_MODES] >> 8) && - (id[ATA_ID_SWDMA_MODES] >> 8)) - goto err_out; - } - return 0; -err_out: - printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name); - return 1; -} - int ide_set_dma(ide_drive_t *drive) { int rc; @@ -449,20 +440,59 @@ void ide_dma_lost_irq(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_dma_lost_irq); -void ide_dma_timeout(ide_drive_t *drive) +/* + * un-busy the port etc, and clear any pending DMA status. we want to + * retry the current request in pio mode instead of risking tossing it + * all away + */ +ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { ide_hwif_t *hwif = drive->hwif; + const struct ide_dma_ops *dma_ops = hwif->dma_ops; + struct ide_cmd *cmd = &hwif->cmd; + ide_startstop_t ret = ide_stopped; - printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name); + /* + * end current dma transaction + */ - if (hwif->dma_ops->dma_test_irq(drive)) - return; + if (error < 0) { + printk(KERN_WARNING "%s: DMA timeout error\n", drive->name); + drive->waiting_for_dma = 0; + (void)dma_ops->dma_end(drive); + ide_dma_unmap_sg(drive, cmd); + ret = ide_error(drive, "dma timeout error", + hwif->tp_ops->read_status(hwif)); + } else { + printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name); + if (dma_ops->dma_clear) + dma_ops->dma_clear(drive); + printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name); + if (dma_ops->dma_test_irq(drive) == 0) { + ide_dump_status(drive, "DMA timeout", + hwif->tp_ops->read_status(hwif)); + drive->waiting_for_dma = 0; + (void)dma_ops->dma_end(drive); + ide_dma_unmap_sg(drive, cmd); + } + } - ide_dump_status(drive, "DMA timeout", hwif->tp_ops->read_status(hwif)); + /* + * disable dma for now, but remember that we did so because of + * a timeout -- we'll reenable after we finish this next request + * (or rather the first chunk of it) in pio. + */ + drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY; + drive->retry_pio++; + ide_dma_off_quietly(drive); - hwif->dma_ops->dma_end(drive); + /* + * make sure request is sane + */ + if (hwif->rq) + hwif->rq->errors = 0; + return ret; } -EXPORT_SYMBOL_GPL(ide_dma_timeout); void ide_release_dma_engine(ide_hwif_t *hwif) { @@ -499,3 +529,25 @@ int ide_allocate_dma_engine(ide_hwif_t *hwif) return 0; } EXPORT_SYMBOL_GPL(ide_allocate_dma_engine); + +int ide_dma_prepare(ide_drive_t *drive, struct ide_cmd *cmd) +{ + const struct ide_dma_ops *dma_ops = drive->hwif->dma_ops; + + if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 || + (dma_ops->dma_check && dma_ops->dma_check(drive, cmd))) + goto out; + ide_map_sg(drive, cmd); + if (ide_dma_map_sg(drive, cmd) == 0) + goto out_map; + if (dma_ops->dma_setup(drive, cmd)) + goto out_dma_unmap; + drive->waiting_for_dma = 1; + return 0; +out_dma_unmap: + ide_dma_unmap_sg(drive, cmd); +out_map: + ide_map_sg(drive, cmd); +out: + return 1; +} diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c new file mode 100644 index 00000000000..32970664c27 --- /dev/null +++ b/drivers/ide/ide-eh.c @@ -0,0 +1,442 @@ + +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/ide.h> +#include <linux/delay.h> + +static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, + u8 stat, u8 err) +{ + ide_hwif_t *hwif = drive->hwif; + + if ((stat & ATA_BUSY) || + ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { + /* other bits are useless when BUSY */ + rq->errors |= ERROR_RESET; + } else if (stat & ATA_ERR) { + /* err has different meaning on cdrom and tape */ + if (err == ATA_ABORTED) { + if ((drive->dev_flags & IDE_DFLAG_LBA) && + /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */ + hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS) + return ide_stopped; + } else if ((err & BAD_CRC) == BAD_CRC) { + /* UDMA crc error, just retry the operation */ + drive->crc_count++; + } else if (err & (ATA_BBK | ATA_UNC)) { + /* retries won't help these */ + rq->errors = ERROR_MAX; + } else if (err & ATA_TRK0NF) { + /* help it find track zero */ + rq->errors |= ERROR_RECAL; + } + } + + if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ && + (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { + int nsect = drive->mult_count ? drive->mult_count : 1; + + ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE); + } + + if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) { + ide_kill_rq(drive, rq); + return ide_stopped; + } + + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) + rq->errors |= ERROR_RESET; + + if ((rq->errors & ERROR_RESET) == ERROR_RESET) { + ++rq->errors; + return ide_do_reset(drive); + } + + if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) + drive->special_flags |= IDE_SFLAG_RECALIBRATE; + + ++rq->errors; + + return ide_stopped; +} + +static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, + u8 stat, u8 err) +{ + ide_hwif_t *hwif = drive->hwif; + + if ((stat & ATA_BUSY) || + ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { + /* other bits are useless when BUSY */ + rq->errors |= ERROR_RESET; + } else { + /* add decoding error stuff */ + } + + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) + /* force an abort */ + hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); + + if (rq->errors >= ERROR_MAX) { + ide_kill_rq(drive, rq); + } else { + if ((rq->errors & ERROR_RESET) == ERROR_RESET) { + ++rq->errors; + return ide_do_reset(drive); + } + ++rq->errors; + } + + return ide_stopped; +} + +static ide_startstop_t __ide_error(ide_drive_t *drive, struct request *rq, + u8 stat, u8 err) +{ + if (drive->media == ide_disk) + return ide_ata_error(drive, rq, stat, err); + return ide_atapi_error(drive, rq, stat, err); +} + +/** + * ide_error - handle an error on the IDE + * @drive: drive the error occurred on + * @msg: message to report + * @stat: status bits + * + * ide_error() takes action based on the error returned by the drive. + * For normal I/O that may well include retries. We deal with + * both new-style (taskfile) and old style command handling here. + * In the case of taskfile command handling there is work left to + * do + */ + +ide_startstop_t ide_error(ide_drive_t *drive, const char *msg, u8 stat) +{ + struct request *rq; + u8 err; + + err = ide_dump_status(drive, msg, stat); + + rq = drive->hwif->rq; + if (rq == NULL) + return ide_stopped; + + /* retry only "normal" I/O: */ + if (rq->cmd_type != REQ_TYPE_FS) { + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { + struct ide_cmd *cmd = rq->special; + + if (cmd) + ide_complete_cmd(drive, cmd, stat, err); + } else if (blk_pm_request(rq)) { + rq->errors = 1; + ide_complete_pm_rq(drive, rq); + return ide_stopped; + } + rq->errors = err; + ide_complete_rq(drive, err ? -EIO : 0, blk_rq_bytes(rq)); + return ide_stopped; + } + + return __ide_error(drive, rq, stat, err); +} +EXPORT_SYMBOL_GPL(ide_error); + +static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) +{ + struct request *rq = drive->hwif->rq; + + if (rq && rq->cmd_type == REQ_TYPE_SPECIAL && + rq->cmd[0] == REQ_DRIVE_RESET) { + if (err <= 0 && rq->errors == 0) + rq->errors = -EIO; + ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq)); + } +} + +/* needed below */ +static ide_startstop_t do_reset1(ide_drive_t *, int); + +/* + * atapi_reset_pollfunc() gets invoked to poll the interface for completion + * every 50ms during an atapi drive reset operation. If the drive has not yet + * responded, and we have not yet hit our maximum waiting time, then the timer + * is restarted for another 50ms. + */ +static ide_startstop_t atapi_reset_pollfunc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + u8 stat; + + tp_ops->dev_select(drive); + udelay(10); + stat = tp_ops->read_status(hwif); + + if (OK_STAT(stat, 0, ATA_BUSY)) + printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name); + else { + if (time_before(jiffies, hwif->poll_timeout)) { + ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20); + /* continue polling */ + return ide_started; + } + /* end of polling */ + hwif->polling = 0; + printk(KERN_ERR "%s: ATAPI reset timed-out, status=0x%02x\n", + drive->name, stat); + /* do it the old fashioned way */ + return do_reset1(drive, 1); + } + /* done polling */ + hwif->polling = 0; + ide_complete_drive_reset(drive, 0); + return ide_stopped; +} + +static void ide_reset_report_error(ide_hwif_t *hwif, u8 err) +{ + static const char *err_master_vals[] = + { NULL, "passed", "formatter device error", + "sector buffer error", "ECC circuitry error", + "controlling MPU error" }; + + u8 err_master = err & 0x7f; + + printk(KERN_ERR "%s: reset: master: ", hwif->name); + if (err_master && err_master < 6) + printk(KERN_CONT "%s", err_master_vals[err_master]); + else + printk(KERN_CONT "error (0x%02x?)", err); + if (err & 0x80) + printk(KERN_CONT "; slave: failed"); + printk(KERN_CONT "\n"); +} + +/* + * reset_pollfunc() gets invoked to poll the interface for completion every 50ms + * during an ide reset operation. If the drives have not yet responded, + * and we have not yet hit our maximum waiting time, then the timer is restarted + * for another 50ms. + */ +static ide_startstop_t reset_pollfunc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + u8 tmp; + int err = 0; + + if (port_ops && port_ops->reset_poll) { + err = port_ops->reset_poll(drive); + if (err) { + printk(KERN_ERR "%s: host reset_poll failure for %s.\n", + hwif->name, drive->name); + goto out; + } + } + + tmp = hwif->tp_ops->read_status(hwif); + + if (!OK_STAT(tmp, 0, ATA_BUSY)) { + if (time_before(jiffies, hwif->poll_timeout)) { + ide_set_handler(drive, &reset_pollfunc, HZ/20); + /* continue polling */ + return ide_started; + } + printk(KERN_ERR "%s: reset timed-out, status=0x%02x\n", + hwif->name, tmp); + drive->failures++; + err = -EIO; + } else { + tmp = ide_read_error(drive); + + if (tmp == 1) { + printk(KERN_INFO "%s: reset: success\n", hwif->name); + drive->failures = 0; + } else { + ide_reset_report_error(hwif, tmp); + drive->failures++; + err = -EIO; + } + } +out: + hwif->polling = 0; /* done polling */ + ide_complete_drive_reset(drive, err); + return ide_stopped; +} + +static void ide_disk_pre_reset(ide_drive_t *drive) +{ + int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1; + + drive->special_flags = + legacy ? (IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE) : 0; + + drive->mult_count = 0; + drive->dev_flags &= ~IDE_DFLAG_PARKED; + + if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 && + (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) + drive->mult_req = 0; + + if (drive->mult_req != drive->mult_count) + drive->special_flags |= IDE_SFLAG_SET_MULTMODE; +} + +static void pre_reset(ide_drive_t *drive) +{ + const struct ide_port_ops *port_ops = drive->hwif->port_ops; + + if (drive->media == ide_disk) + ide_disk_pre_reset(drive); + else + drive->dev_flags |= IDE_DFLAG_POST_RESET; + + if (drive->dev_flags & IDE_DFLAG_USING_DMA) { + if (drive->crc_count) + ide_check_dma_crc(drive); + else + ide_dma_off(drive); + } + + if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) { + if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) { + drive->dev_flags &= ~IDE_DFLAG_UNMASK; + drive->io_32bit = 0; + } + return; + } + + if (port_ops && port_ops->pre_reset) + port_ops->pre_reset(drive); + + if (drive->current_speed != 0xff) + drive->desired_speed = drive->current_speed; + drive->current_speed = 0xff; +} + +/* + * do_reset1() attempts to recover a confused drive by resetting it. + * Unfortunately, resetting a disk drive actually resets all devices on + * the same interface, so it can really be thought of as resetting the + * interface rather than resetting the drive. + * + * ATAPI devices have their own reset mechanism which allows them to be + * individually reset without clobbering other devices on the same interface. + * + * Unfortunately, the IDE interface does not generate an interrupt to let + * us know when the reset operation has finished, so we must poll for this. + * Equally poor, though, is the fact that this may a very long time to complete, + * (up to 30 seconds worstcase). So, instead of busy-waiting here for it, + * we set a timer to poll at 50ms intervals. + */ +static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + const struct ide_port_ops *port_ops; + ide_drive_t *tdrive; + unsigned long flags, timeout; + int i; + DEFINE_WAIT(wait); + + spin_lock_irqsave(&hwif->lock, flags); + + /* We must not reset with running handlers */ + BUG_ON(hwif->handler != NULL); + + /* For an ATAPI device, first try an ATAPI SRST. */ + if (drive->media != ide_disk && !do_not_try_atapi) { + pre_reset(drive); + tp_ops->dev_select(drive); + udelay(20); + tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); + ndelay(400); + hwif->poll_timeout = jiffies + WAIT_WORSTCASE; + hwif->polling = 1; + __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20); + spin_unlock_irqrestore(&hwif->lock, flags); + return ide_started; + } + + /* We must not disturb devices in the IDE_DFLAG_PARKED state. */ + do { + unsigned long now; + + prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE); + timeout = jiffies; + ide_port_for_each_present_dev(i, tdrive, hwif) { + if ((tdrive->dev_flags & IDE_DFLAG_PARKED) && + time_after(tdrive->sleep, timeout)) + timeout = tdrive->sleep; + } + + now = jiffies; + if (time_before_eq(timeout, now)) + break; + + spin_unlock_irqrestore(&hwif->lock, flags); + timeout = schedule_timeout_uninterruptible(timeout - now); + spin_lock_irqsave(&hwif->lock, flags); + } while (timeout); + finish_wait(&ide_park_wq, &wait); + + /* + * First, reset any device state data we were maintaining + * for any of the drives on this interface. + */ + ide_port_for_each_dev(i, tdrive, hwif) + pre_reset(tdrive); + + if (io_ports->ctl_addr == 0) { + spin_unlock_irqrestore(&hwif->lock, flags); + ide_complete_drive_reset(drive, -ENXIO); + return ide_stopped; + } + + /* + * Note that we also set nIEN while resetting the device, + * to mask unwanted interrupts from the interface during the reset. + * However, due to the design of PC hardware, this will cause an + * immediate interrupt due to the edge transition it produces. + * This single interrupt gives us a "fast poll" for drives that + * recover from reset very quickly, saving us the first 50ms wait time. + */ + /* set SRST and nIEN */ + tp_ops->write_devctl(hwif, ATA_SRST | ATA_NIEN | ATA_DEVCTL_OBS); + /* more than enough time */ + udelay(10); + /* clear SRST, leave nIEN (unless device is on the quirk list) */ + tp_ops->write_devctl(hwif, + ((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) ? 0 : ATA_NIEN) | + ATA_DEVCTL_OBS); + /* more than enough time */ + udelay(10); + hwif->poll_timeout = jiffies + WAIT_WORSTCASE; + hwif->polling = 1; + __ide_set_handler(drive, &reset_pollfunc, HZ/20); + + /* + * Some weird controller like resetting themselves to a strange + * state when the disks are reset this way. At least, the Winbond + * 553 documentation says that + */ + port_ops = hwif->port_ops; + if (port_ops && port_ops->resetproc) + port_ops->resetproc(drive); + + spin_unlock_irqrestore(&hwif->lock, flags); + return ide_started; +} + +/* + * ide_do_reset() is the entry point to the drive/interface reset code. + */ + +ide_startstop_t ide_do_reset(ide_drive_t *drive) +{ + return do_reset1(drive, 0); +} +EXPORT_SYMBOL(ide_do_reset); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3eab1c6c9b3..3d42043fec5 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -25,7 +25,6 @@ #include <linux/major.h> #include <linux/errno.h> #include <linux/genhd.h> -#include <linux/slab.h> #include <linux/cdrom.h> #include <linux/ide.h> #include <linux/hdreg.h> @@ -36,7 +35,6 @@ #include <scsi/scsi_ioctl.h> #include <asm/byteorder.h> -#include <linux/irq.h> #include <linux/uaccess.h> #include <linux/io.h> #include <asm/unaligned.h> @@ -61,76 +59,24 @@ */ #define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */ -/* Error code returned in rq->errors to the higher part of the driver. */ -#define IDEFLOPPY_ERROR_GENERAL 101 - -/* - * Used to finish servicing a request. For read/write requests, we will call - * ide_end_request to pass to the next buffer. - */ -static int ide_floppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) -{ - struct ide_disk_obj *floppy = drive->driver_data; - struct request *rq = drive->hwif->rq; - int error; - - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); - - switch (uptodate) { - case 0: - error = IDEFLOPPY_ERROR_GENERAL; - break; - - case 1: - error = 0; - break; - - default: - error = uptodate; - } - - if (error) - floppy->failed_pc = NULL; - /* Why does this happen? */ - if (!rq) - return 0; - if (!blk_special_request(rq)) { - /* our real local end request function */ - ide_end_request(drive, uptodate, nsecs); - return 0; - } - rq->errors = error; - /* fixme: need to move this local also */ - ide_end_drive_cmd(drive, 0, 0); - return 0; -} - -static void idefloppy_update_buffers(ide_drive_t *drive, - struct ide_atapi_pc *pc) -{ - struct request *rq = pc->rq; - struct bio *bio = rq->bio; - - while ((bio = rq->bio) != NULL) - ide_floppy_end_request(drive, 1, 0); -} - -static void ide_floppy_callback(ide_drive_t *drive, int dsc) +static int ide_floppy_callback(ide_drive_t *drive, int dsc) { struct ide_disk_obj *floppy = drive->driver_data; struct ide_atapi_pc *pc = drive->pc; + struct request *rq = pc->rq; int uptodate = pc->error ? 0 : 1; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); - if (floppy->failed_pc == pc) - floppy->failed_pc = NULL; + if (drive->failed_pc == pc) + drive->failed_pc = NULL; if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 || - (pc->rq && blk_pc_request(pc->rq))) + rq->cmd_type == REQ_TYPE_BLOCK_PC) uptodate = 1; /* FIXME */ else if (pc->c[0] == GPCMD_REQUEST_SENSE) { - u8 *buf = pc->buf; + + u8 *buf = bio_data(rq->bio); if (!pc->error) { floppy->sense_key = buf[2] & 0x0F; @@ -139,25 +85,28 @@ static void ide_floppy_callback(ide_drive_t *drive, int dsc) floppy->progress_indication = buf[15] & 0x80 ? (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; - if (floppy->failed_pc) - ide_debug_log(IDE_DBG_PC, "pc = %x, ", - floppy->failed_pc->c[0]); + if (drive->failed_pc) + ide_debug_log(IDE_DBG_PC, "pc = %x", + drive->failed_pc->c[0]); ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x," - "ascq = %x\n", floppy->sense_key, + "ascq = %x", floppy->sense_key, floppy->asc, floppy->ascq); } else printk(KERN_ERR PFX "Error in REQUEST SENSE itself - " "Aborting request!\n"); } - ide_floppy_end_request(drive, uptodate, 0); + if (rq->cmd_type == REQ_TYPE_SPECIAL) + rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL; + + return uptodate; } static void ide_floppy_report_error(struct ide_disk_obj *floppy, struct ide_atapi_pc *pc) { - /* supress error messages resulting from Medium not present */ + /* suppress error messages resulting from Medium not present */ if (floppy->sense_key == 0x02 && floppy->asc == 0x3a && floppy->ascq == 0x00) @@ -170,34 +119,39 @@ static void ide_floppy_report_error(struct ide_disk_obj *floppy, } -static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, - struct ide_atapi_pc *pc) +static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, + struct ide_cmd *cmd, + struct ide_atapi_pc *pc) { struct ide_disk_obj *floppy = drive->driver_data; - if (floppy->failed_pc == NULL && + if (drive->failed_pc == NULL && pc->c[0] != GPCMD_REQUEST_SENSE) - floppy->failed_pc = pc; + drive->failed_pc = pc; /* Set the current packet command */ drive->pc = pc; if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { + unsigned int done = blk_rq_bytes(drive->hwif->rq); + if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) ide_floppy_report_error(floppy, pc); + /* Giving up */ - pc->error = IDEFLOPPY_ERROR_GENERAL; + pc->error = IDE_DRV_ERROR_GENERAL; - floppy->failed_pc = NULL; + drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, done); return ide_stopped; } - ide_debug_log(IDE_DBG_FUNC, "%s: Retry #%d\n", __func__, pc->retries); + ide_debug_log(IDE_DBG_FUNC, "retry #%d", pc->retries); pc->retries++; - return ide_issue_pc(drive); + return ide_issue_pc(drive, cmd); } void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) @@ -239,11 +193,10 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive, { struct ide_disk_obj *floppy = drive->driver_data; int block = sector / floppy->bs_factor; - int blocks = rq->nr_sectors / floppy->bs_factor; + int blocks = blk_rq_sectors(rq) / floppy->bs_factor; int cmd = rq_data_dir(rq); - ide_debug_log(IDE_DBG_FUNC, "%s: block: %d, blocks: %d\n", __func__, - block, blocks); + ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks); ide_init_pc(pc); pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; @@ -253,11 +206,9 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive, memcpy(rq->cmd, pc->c, 12); pc->rq = rq; - pc->b_count = 0; - if (rq->cmd_flags & REQ_RW) + if (rq->cmd_flags & REQ_WRITE) pc->flags |= PC_FLAG_WRITING; - pc->buf = NULL; - pc->req_xfer = pc->buf_size = blocks * floppy->block_size; + pc->flags |= PC_FLAG_DMA_OK; } @@ -267,75 +218,88 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy, ide_init_pc(pc); memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; - pc->b_count = 0; - if (rq->data_len && rq_data_dir(rq) == WRITE) - pc->flags |= PC_FLAG_WRITING; - pc->buf = rq->data; - if (rq->bio) + if (blk_rq_bytes(rq)) { pc->flags |= PC_FLAG_DMA_OK; - /* - * possibly problematic, doesn't look like ide-floppy correctly - * handled scattered requests if dma fails... - */ - pc->req_xfer = pc->buf_size = rq->data_len; + if (rq_data_dir(rq) == WRITE) + pc->flags |= PC_FLAG_WRITING; + } } static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { struct ide_disk_obj *floppy = drive->driver_data; - ide_hwif_t *hwif = drive->hwif; + struct ide_cmd cmd; struct ide_atapi_pc *pc; - ide_debug_log(IDE_DBG_FUNC, "%s: dev: %s, cmd: 0x%x, cmd_type: %x, " - "errors: %d\n", - __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?", - rq->cmd[0], rq->cmd_type, rq->errors); + ide_debug_log(IDE_DBG_FUNC, "enter, cmd: 0x%x\n", rq->cmd[0]); - ide_debug_log(IDE_DBG_FUNC, "%s: sector: %ld, nr_sectors: %ld, " - "current_nr_sectors: %d\n", - __func__, (long)rq->sector, rq->nr_sectors, - rq->current_nr_sectors); + if (drive->debug_mask & IDE_DBG_RQ) + blk_dump_rq_flags(rq, (rq->rq_disk + ? rq->rq_disk->disk_name + : "dev?")); if (rq->errors >= ERROR_MAX) { - if (floppy->failed_pc) - ide_floppy_report_error(floppy, floppy->failed_pc); - else + if (drive->failed_pc) { + ide_floppy_report_error(floppy, drive->failed_pc); + drive->failed_pc = NULL; + } else printk(KERN_ERR PFX "%s: I/O error\n", drive->name); - ide_floppy_end_request(drive, 0, 0); - return ide_stopped; + if (rq->cmd_type == REQ_TYPE_SPECIAL) { + rq->errors = 0; + ide_complete_rq(drive, 0, blk_rq_bytes(rq)); + return ide_stopped; + } else + goto out_end; } - if (blk_fs_request(rq)) { - if (((long)rq->sector % floppy->bs_factor) || - (rq->nr_sectors % floppy->bs_factor)) { + + switch (rq->cmd_type) { + case REQ_TYPE_FS: + if (((long)blk_rq_pos(rq) % floppy->bs_factor) || + (blk_rq_sectors(rq) % floppy->bs_factor)) { printk(KERN_ERR PFX "%s: unsupported r/w rq size\n", drive->name); - ide_floppy_end_request(drive, 0, 0); - return ide_stopped; + goto out_end; } pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); - } else if (blk_special_request(rq)) { - pc = (struct ide_atapi_pc *) rq->buffer; - } else if (blk_pc_request(rq)) { + break; + case REQ_TYPE_SPECIAL: + case REQ_TYPE_SENSE: + pc = (struct ide_atapi_pc *)rq->special; + break; + case REQ_TYPE_BLOCK_PC: pc = &floppy->queued_pc; idefloppy_blockpc_cmd(floppy, pc, rq); - } else { - blk_dump_rq_flags(rq, PFX "unsupported command in queue"); - ide_floppy_end_request(drive, 0, 0); - return ide_stopped; + break; + default: + BUG(); } - ide_init_sg_cmd(drive, rq); - ide_map_sg(drive, rq); + ide_prep_sense(drive, rq); + + memset(&cmd, 0, sizeof(cmd)); + + if (rq_data_dir(rq)) + cmd.tf_flags |= IDE_TFLAG_WRITE; - pc->sg = hwif->sg_table; - pc->sg_cnt = hwif->sg_nents; + cmd.rq = rq; + + if (rq->cmd_type == REQ_TYPE_FS || blk_rq_bytes(rq)) { + ide_init_sg_cmd(&cmd, blk_rq_bytes(rq)); + ide_map_sg(drive, &cmd); + } pc->rq = rq; - return idefloppy_issue_pc(drive, pc); + return ide_floppy_issue_pc(drive, &cmd, pc); +out_end: + drive->failed_pc = NULL; + if (rq->cmd_type != REQ_TYPE_FS && rq->errors == 0) + rq->errors = -EIO; + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); + return ide_stopped; } /* @@ -347,33 +311,33 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive, { struct ide_disk_obj *floppy = drive->driver_data; struct gendisk *disk = floppy->disk; - u8 *page; + u8 *page, buf[40]; int capacity, lba_capacity; u16 transfer_rate, sector_size, cyls, rpm; u8 heads, sectors; ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE); - if (ide_queue_pc_tail(drive, disk, pc)) { + if (ide_queue_pc_tail(drive, disk, pc, buf, pc->req_xfer)) { printk(KERN_ERR PFX "Can't get flexible disk page params\n"); return 1; } - if (pc->buf[3] & 0x80) + if (buf[3] & 0x80) drive->dev_flags |= IDE_DFLAG_WP; else drive->dev_flags &= ~IDE_DFLAG_WP; set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP)); - page = &pc->buf[8]; + page = &buf[8]; - transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]); - sector_size = be16_to_cpup((__be16 *)&pc->buf[8 + 6]); - cyls = be16_to_cpup((__be16 *)&pc->buf[8 + 8]); - rpm = be16_to_cpup((__be16 *)&pc->buf[8 + 28]); - heads = pc->buf[8 + 4]; - sectors = pc->buf[8 + 5]; + transfer_rate = be16_to_cpup((__be16 *)&buf[8 + 2]); + sector_size = be16_to_cpup((__be16 *)&buf[8 + 6]); + cyls = be16_to_cpup((__be16 *)&buf[8 + 8]); + rpm = be16_to_cpup((__be16 *)&buf[8 + 28]); + heads = buf[8 + 4]; + sectors = buf[8 + 5]; capacity = cyls * heads * sectors * sector_size; @@ -411,9 +375,11 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) struct gendisk *disk = floppy->disk; struct ide_atapi_pc pc; u8 *cap_desc; - u8 header_len, desc_cnt; + u8 pc_buf[256], header_len, desc_cnt; int i, rc = 1, blocks, length; + ide_debug_log(IDE_DBG_FUNC, "enter"); + drive->bios_cyl = 0; drive->bios_head = drive->bios_sect = 0; floppy->blocks = 0; @@ -421,23 +387,24 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) drive->capacity64 = 0; ide_floppy_create_read_capacity_cmd(&pc); - if (ide_queue_pc_tail(drive, disk, &pc)) { + if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) { printk(KERN_ERR PFX "Can't get floppy parameters\n"); return 1; } - header_len = pc.buf[3]; - cap_desc = &pc.buf[4]; + header_len = pc_buf[3]; + cap_desc = &pc_buf[4]; desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ for (i = 0; i < desc_cnt; i++) { unsigned int desc_start = 4 + i*8; - blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); - length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); + blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]); + length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]); ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, " - "%d sector size\n", - i, blocks * length / 1024, blocks, length); + "%d sector size", + i, blocks * length / 1024, + blocks, length); if (i) continue; @@ -445,7 +412,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) * the code below is valid only for the 1st descriptor, ie i=0 */ - switch (pc.buf[desc_start + 4] & 0x03) { + switch (pc_buf[desc_start + 4] & 0x03) { /* Clik! drive returns this instead of CAPACITY_CURRENT */ case CAPACITY_UNFORMATTED: if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) @@ -493,8 +460,8 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) "in drive\n", drive->name); break; } - ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d\n", - pc.buf[desc_start + 4] & 0x03); + ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d", + pc_buf[desc_start + 4] & 0x03); } /* Clik! disk does not support get_flexible_disk_page */ @@ -510,8 +477,6 @@ static void ide_floppy_setup(ide_drive_t *drive) u16 *id = drive->id; drive->pc_callback = ide_floppy_callback; - drive->pc_update_buffers = idefloppy_update_buffers; - drive->pc_io_buffers = ide_io_buffers; /* * We used to check revisions here. At this point however I'm giving up. @@ -526,7 +491,7 @@ static void ide_floppy_setup(ide_drive_t *drive) drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE; /* This value will be visible in the /proc/ide/hdx/settings */ drive->pc_delay = IDEFLOPPY_PC_DELAY; - blk_queue_max_sectors(drive->queue, 64); + blk_queue_max_hw_sectors(drive->queue, 64); } /* @@ -534,7 +499,7 @@ static void ide_floppy_setup(ide_drive_t *drive) * nasty clicking noises without it, so please don't remove this. */ if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) { - blk_queue_max_sectors(drive->queue, 64); + blk_queue_max_hw_sectors(drive->queue, 64); drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE; /* IOMEGA Clik! drives do not support lock/unlock commands */ drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING; @@ -573,6 +538,5 @@ const struct ide_disk_ops ide_atapi_disk_ops = { .init_media = ide_floppy_init_media, .set_doorlock = ide_set_media_lock, .do_request = ide_floppy_do_request, - .end_request = ide_floppy_end_request, .ioctl = ide_floppy_ioctl, }; diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c index 8f8be854603..a22ca846701 100644 --- a/drivers/ide/ide-floppy_ioctl.c +++ b/drivers/ide/ide-floppy_ioctl.c @@ -5,6 +5,7 @@ #include <linux/kernel.h> #include <linux/ide.h> #include <linux/cdrom.h> +#include <linux/mutex.h> #include <asm/unaligned.h> @@ -31,14 +32,15 @@ * On exit we set nformats to the number of records we've actually initialized. */ +static DEFINE_MUTEX(ide_floppy_ioctl_mutex); static int ide_floppy_get_format_capacities(ide_drive_t *drive, struct ide_atapi_pc *pc, int __user *arg) { struct ide_disk_obj *floppy = drive->driver_data; - u8 header_len, desc_cnt; int i, blocks, length, u_array_size, u_index; int __user *argp; + u8 pc_buf[256], header_len, desc_cnt; if (get_user(u_array_size, arg)) return -EFAULT; @@ -47,12 +49,13 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, return -EINVAL; ide_floppy_create_read_capacity_cmd(pc); - if (ide_queue_pc_tail(drive, floppy->disk, pc)) { + + if (ide_queue_pc_tail(drive, floppy->disk, pc, pc_buf, pc->req_xfer)) { printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); return -EIO; } - header_len = pc->buf[3]; + header_len = pc_buf[3]; desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ u_index = 0; @@ -69,8 +72,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, if (u_index >= u_array_size) break; /* User-supplied buffer too small */ - blocks = be32_to_cpup((__be32 *)&pc->buf[desc_start]); - length = be16_to_cpup((__be16 *)&pc->buf[desc_start + 6]); + blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]); + length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]); if (put_user(blocks, argp)) return -EFAULT; @@ -91,40 +94,42 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, return 0; } -static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b, - int l, int flags) +static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, + u8 *buf, int b, int l, + int flags) { ide_init_pc(pc); pc->c[0] = GPCMD_FORMAT_UNIT; pc->c[1] = 0x17; - memset(pc->buf, 0, 12); - pc->buf[1] = 0xA2; + memset(buf, 0, 12); + buf[1] = 0xA2; /* Default format list header, u8 1: FOV/DCRT/IMM bits set */ if (flags & 1) /* Verify bit on... */ - pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */ - pc->buf[3] = 8; + buf[1] ^= 0x20; /* ... turn off DCRT bit */ + buf[3] = 8; - put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4])); - put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8])); - pc->buf_size = 12; + put_unaligned(cpu_to_be32(b), (unsigned int *)(&buf[4])); + put_unaligned(cpu_to_be32(l), (unsigned int *)(&buf[8])); + pc->req_xfer = 12; pc->flags |= PC_FLAG_WRITING; } static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct ide_disk_obj *floppy = drive->driver_data; + u8 buf[20]; drive->atapi_flags &= ~IDE_AFLAG_SRFP; ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE); pc->flags |= PC_FLAG_SUPPRESS_ERROR; - if (ide_queue_pc_tail(drive, floppy->disk, pc)) + if (ide_queue_pc_tail(drive, floppy->disk, pc, buf, pc->req_xfer)) return 1; - if (pc->buf[8 + 2] & 0x40) + if (buf[8 + 2] & 0x40) drive->atapi_flags |= IDE_AFLAG_SRFP; return 0; @@ -134,6 +139,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc, int __user *arg) { struct ide_disk_obj *floppy = drive->driver_data; + u8 buf[12]; int blocks, length, flags, err = 0; if (floppy->openers > 1) { @@ -167,9 +173,9 @@ static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc, } ide_floppy_get_sfrp_bit(drive, pc); - ide_floppy_create_format_unit_cmd(pc, blocks, length, flags); + ide_floppy_create_format_unit_cmd(pc, buf, blocks, length, flags); - if (ide_queue_pc_tail(drive, floppy->disk, pc)) + if (ide_queue_pc_tail(drive, floppy->disk, pc, buf, pc->req_xfer)) err = -EIO; out: @@ -193,11 +199,13 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg) { struct ide_disk_obj *floppy = drive->driver_data; + u8 sense_buf[18]; int progress_indication = 0x10000; if (drive->atapi_flags & IDE_AFLAG_SRFP) { ide_create_request_sense_cmd(drive, pc); - if (ide_queue_pc_tail(drive, floppy->disk, pc)) + if (ide_queue_pc_tail(drive, floppy->disk, pc, sense_buf, + pc->req_xfer)) return -EIO; if (floppy->sense_key == 2 && @@ -269,23 +277,27 @@ int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev, void __user *argp = (void __user *)arg; int err; - if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) - return ide_floppy_lockdoor(drive, &pc, arg, cmd); + mutex_lock(&ide_floppy_ioctl_mutex); + if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) { + err = ide_floppy_lockdoor(drive, &pc, arg, cmd); + goto out; + } err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp); if (err != -ENOTTY) - return err; + goto out; /* * skip SCSI_IOCTL_SEND_COMMAND (deprecated) * and CDROM_SEND_PACKET (legacy) ioctls */ if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND) - err = scsi_cmd_ioctl(bdev->bd_disk->queue, bdev->bd_disk, - mode, cmd, argp); + err = scsi_cmd_blk_ioctl(bdev, mode, cmd, argp); if (err == -ENOTTY) err = generic_ide_ioctl(drive, bdev, cmd, arg); +out: + mutex_unlock(&ide_floppy_ioctl_mutex); return err; } diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c index 3ec762cb60a..e7a25ea757d 100644 --- a/drivers/ide/ide-floppy_proc.c +++ b/drivers/ide/ide-floppy_proc.c @@ -1,22 +1,35 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> +#include <linux/seq_file.h> #include "ide-floppy.h" -static int proc_idefloppy_read_capacity(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int idefloppy_capacity_proc_show(struct seq_file *m, void *v) { - ide_drive_t*drive = (ide_drive_t *)data; - int len; + ide_drive_t*drive = (ide_drive_t *)m->private; - len = sprintf(page, "%llu\n", (long long)ide_gd_capacity(drive)); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%llu\n", (long long)ide_gd_capacity(drive)); + return 0; } +static int idefloppy_capacity_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idefloppy_capacity_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations idefloppy_capacity_proc_fops = { + .owner = THIS_MODULE, + .open = idefloppy_capacity_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + ide_proc_entry_t ide_floppy_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, - { NULL, 0, NULL, NULL } + { "capacity", S_IFREG|S_IRUGO, &idefloppy_capacity_proc_fops }, + { "geometry", S_IFREG|S_IRUGO, &ide_geometry_proc_fops }, + {} }; ide_devset_rw_field(bios_cyl, bios_cyl); @@ -29,5 +42,5 @@ const struct ide_proc_devset ide_floppy_settings[] = { IDE_PROC_DEVSET(bios_head, 0, 255), IDE_PROC_DEVSET(bios_sect, 0, 63), IDE_PROC_DEVSET(ticks, 0, 255), - { 0 }, + { NULL }, }; diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 7857b209c6d..838996a0039 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -7,6 +7,8 @@ #include <linux/mutex.h> #include <linux/ide.h> #include <linux/hdreg.h> +#include <linux/dmi.h> +#include <linux/slab.h> #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) #define IDE_DISK_MINORS (1 << PARTN_BITS) @@ -20,12 +22,13 @@ #define IDE_GD_VERSION "1.18" /* module parameters */ +static DEFINE_MUTEX(ide_gd_mutex); static unsigned long debug_mask; module_param(debug_mask, ulong, 0644); static DEFINE_MUTEX(ide_disk_ref_mutex); -static void ide_disk_release(struct kref *); +static void ide_disk_release(struct device *); static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) { @@ -37,7 +40,7 @@ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) if (ide_device_get(idkp->drive)) idkp = NULL; else - kref_get(&idkp->kref); + get_device(&idkp->dev); } mutex_unlock(&ide_disk_ref_mutex); return idkp; @@ -48,7 +51,7 @@ static void ide_disk_put(struct ide_disk_obj *idkp) ide_drive_t *drive = idkp->drive; mutex_lock(&ide_disk_ref_mutex); - kref_put(&idkp->kref, ide_disk_release); + put_device(&idkp->dev); ide_device_put(drive); mutex_unlock(&ide_disk_ref_mutex); } @@ -66,17 +69,18 @@ static void ide_gd_remove(ide_drive_t *drive) struct gendisk *g = idkp->disk; ide_proc_unregister_driver(drive, idkp->driver); - + device_del(&idkp->dev); del_gendisk(g); - drive->disk_ops->flush(drive); - ide_disk_put(idkp); + mutex_lock(&ide_disk_ref_mutex); + put_device(&idkp->dev); + mutex_unlock(&ide_disk_ref_mutex); } -static void ide_disk_release(struct kref *kref) +static void ide_disk_release(struct device *dev) { - struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj); + struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj); ide_drive_t *drive = idkp->drive; struct gendisk *g = idkp->disk; @@ -89,7 +93,7 @@ static void ide_disk_release(struct kref *kref) /* * On HPA drives the capacity needs to be - * reinitilized on resume otherwise the disk + * reinitialized on resume otherwise the disk * can not be used and a hard reset is required */ static void ide_gd_resume(ide_drive_t *drive) @@ -98,6 +102,19 @@ static void ide_gd_resume(ide_drive_t *drive) (void)drive->disk_ops->get_capacity(drive); } +static const struct dmi_system_id ide_coldreboot_table[] = { + { + /* Acer TravelMate 66x cuts power during reboot */ + .ident = "Acer TravelMate 660", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"), + }, + }, + + { } /* terminate list */ +}; + static void ide_gd_shutdown(ide_drive_t *drive) { #ifdef CONFIG_ALPHA @@ -114,7 +131,8 @@ static void ide_gd_shutdown(ide_drive_t *drive) the disk to expire its write cache. */ if (system_state != SYSTEM_POWER_OFF) { #else - if (system_state == SYSTEM_RESTART) { + if (system_state == SYSTEM_RESTART && + !dmi_check_system(ide_coldreboot_table)) { #endif drive->disk_ops->flush(drive); return; @@ -144,11 +162,6 @@ static ide_startstop_t ide_gd_do_request(ide_drive_t *drive, return drive->disk_ops->do_request(drive, rq, sector); } -static int ide_gd_end_request(ide_drive_t *drive, int uptodate, int nrsecs) -{ - return drive->disk_ops->end_request(drive, uptodate, nrsecs); -} - static struct ide_driver ide_gd_driver = { .gen_driver = { .owner = THIS_MODULE, @@ -161,7 +174,6 @@ static struct ide_driver ide_gd_driver = { .shutdown = ide_gd_shutdown, .version = IDE_GD_VERSION, .do_request = ide_gd_do_request, - .end_request = ide_gd_end_request, #ifdef CONFIG_IDE_PROC_FS .proc_entries = ide_disk_proc_entries, .proc_devsets = ide_disk_proc_devsets, @@ -181,7 +193,7 @@ static int ide_gd_open(struct block_device *bdev, fmode_t mode) drive = idkp->drive; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); idkp->openers++; @@ -226,13 +238,26 @@ out_put_idkp: return ret; } -static int ide_gd_release(struct gendisk *disk, fmode_t mode) +static int ide_gd_unlocked_open(struct block_device *bdev, fmode_t mode) +{ + int ret; + + mutex_lock(&ide_gd_mutex); + ret = ide_gd_open(bdev, mode); + mutex_unlock(&ide_gd_mutex); + + return ret; +} + + +static void ide_gd_release(struct gendisk *disk, fmode_t mode) { struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); ide_drive_t *drive = idkp->drive; - ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); + mutex_lock(&ide_gd_mutex); if (idkp->openers == 1) drive->disk_ops->flush(drive); @@ -244,8 +269,7 @@ static int ide_gd_release(struct gendisk *disk, fmode_t mode) idkp->openers--; ide_disk_put(idkp); - - return 0; + mutex_unlock(&ide_gd_mutex); } static int ide_gd_getgeo(struct block_device *bdev, struct hd_geometry *geo) @@ -259,11 +283,12 @@ static int ide_gd_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } -static int ide_gd_media_changed(struct gendisk *disk) +static unsigned int ide_gd_check_events(struct gendisk *disk, + unsigned int clearing) { struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); ide_drive_t *drive = idkp->drive; - int ret; + bool ret; /* do not scan partitions twice if this is a removable device */ if (drive->dev_flags & IDE_DFLAG_ATTACH) { @@ -271,10 +296,26 @@ static int ide_gd_media_changed(struct gendisk *disk) return 0; } - ret = !!(drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED); + /* + * The following is used to force revalidation on the first open on + * removeable devices, and never gets reported to userland as + * genhd->events is 0. This is intended as removeable ide disk + * can't really detect MEDIA_CHANGE events. + */ + ret = drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED; drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED; - return ret; + return ret ? DISK_EVENT_MEDIA_CHANGE : 0; +} + +static void ide_gd_unlock_native_capacity(struct gendisk *disk) +{ + struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); + ide_drive_t *drive = idkp->drive; + const struct ide_disk_ops *disk_ops = drive->disk_ops; + + if (disk_ops->unlock_native_capacity) + disk_ops->unlock_native_capacity(drive); } static int ide_gd_revalidate_disk(struct gendisk *disk) @@ -282,7 +323,7 @@ static int ide_gd_revalidate_disk(struct gendisk *disk) struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); ide_drive_t *drive = idkp->drive; - if (ide_gd_media_changed(disk)) + if (ide_gd_check_events(disk, 0)) drive->disk_ops->get_capacity(drive); set_capacity(disk, ide_gd_capacity(drive)); @@ -298,13 +339,14 @@ static int ide_gd_ioctl(struct block_device *bdev, fmode_t mode, return drive->disk_ops->ioctl(drive, bdev, mode, cmd, arg); } -static struct block_device_operations ide_gd_ops = { +static const struct block_device_operations ide_gd_ops = { .owner = THIS_MODULE, - .open = ide_gd_open, + .open = ide_gd_unlocked_open, .release = ide_gd_release, - .locked_ioctl = ide_gd_ioctl, + .ioctl = ide_gd_ioctl, .getgeo = ide_gd_getgeo, - .media_changed = ide_gd_media_changed, + .check_events = ide_gd_check_events, + .unlock_native_capacity = ide_gd_unlock_native_capacity, .revalidate_disk = ide_gd_revalidate_disk }; @@ -348,7 +390,12 @@ static int ide_gd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&idkp->kref); + idkp->dev.parent = &drive->gendev; + idkp->dev.release = ide_disk_release; + dev_set_name(&idkp->dev, "%s", dev_name(&drive->gendev)); + + if (device_register(&idkp->dev)) + goto out_free_disk; idkp->drive = drive; idkp->driver = &ide_gd_driver; @@ -373,6 +420,8 @@ static int ide_gd_probe(ide_drive_t *drive) add_disk(g); return 0; +out_free_disk: + put_disk(g); out_free_idkp: kfree(idkp); failed: diff --git a/drivers/ide/ide-gd.h b/drivers/ide/ide-gd.h index a86779f0756..55970772bd0 100644 --- a/drivers/ide/ide-gd.h +++ b/drivers/ide/ide-gd.h @@ -8,7 +8,7 @@ #define IDE_GD_DEBUG_LOG 0 #if IDE_GD_DEBUG_LOG -#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args) +#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args) #else #define ide_debug_log(lvl, fmt, args...) do {} while (0) #endif @@ -17,11 +17,9 @@ struct ide_disk_obj { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; unsigned int openers; /* protected by BKL for now */ - /* Last failed packet command */ - struct ide_atapi_pc *failed_pc; /* used for blk_{fs,pc}_request() requests */ struct ide_atapi_pc queued_pc; diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 81a5282ce1e..54d7c4685d2 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -1,27 +1,22 @@ /* * generic/default IDE host driver * - * Copyright (C) 2004, 2008 Bartlomiej Zolnierkiewicz + * Copyright (C) 2004, 2008-2009 Bartlomiej Zolnierkiewicz * This code was split off from ide.c. See it for original copyrights. * * May be copied or modified under the terms of the GNU General Public License. */ -/* - * For special cases new interfaces may be added using sysfs, i.e. - * - * echo -n "0x168:0x36e:10" > /sys/class/ide_generic/add - * - * will add an interface using I/O ports 0x168-0x16f/0x36e and IRQ 10. - */ - #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> #include <linux/ide.h> #include <linux/pci_ids.h> -/* FIXME: convert m32r to use ide_platform host driver */ +/* FIXME: convert arm and m32r to use ide_platform host driver */ +#ifdef CONFIG_ARM +#include <asm/irq.h> +#endif #ifdef CONFIG_M32R #include <asm/m32r.h> #endif @@ -32,62 +27,16 @@ static int probe_mask; module_param(probe_mask, int, 0); MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports"); -static ssize_t store_add(struct class *cls, const char *buf, size_t n) -{ - unsigned int base, ctl; - int irq, rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - - if (sscanf(buf, "%x:%x:%d", &base, &ctl, &irq) != 3) - return -EINVAL; - - memset(&hw, 0, sizeof(hw)); - ide_std_init_ports(&hw, base, ctl); - hw.irq = irq; - hw.chipset = ide_generic; - - rc = ide_host_add(NULL, hws, NULL); - if (rc) - return rc; - - return n; +static const struct ide_port_info ide_generic_port_info = { + .host_flags = IDE_HFLAG_NO_DMA, + .chipset = ide_generic, }; -static struct class_attribute ide_generic_class_attrs[] = { - __ATTR(add, S_IWUSR, NULL, store_add), - __ATTR_NULL -}; - -static void ide_generic_class_release(struct class *cls) -{ - kfree(cls); -} - -static int __init ide_generic_sysfs_init(void) -{ - struct class *cls; - int rc; - - cls = kzalloc(sizeof(*cls), GFP_KERNEL); - if (!cls) - return -ENOMEM; - - cls->name = DRV_NAME; - cls->owner = THIS_MODULE; - cls->class_release = ide_generic_class_release; - cls->class_attrs = ide_generic_class_attrs; - - rc = class_register(cls); - if (rc) { - kfree(cls); - return rc; - } - - return 0; -} - -#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) \ - || defined(CONFIG_PLAT_OPSPUT) +#ifdef CONFIG_ARM +static const u16 legacy_bases[] = { 0x1f0 }; +static const int legacy_irqs[] = { IRQ_HARDDISK }; +#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || \ + defined(CONFIG_PLAT_OPSPUT) static const u16 legacy_bases[] = { 0x1f0 }; static const int legacy_irqs[] = { PLD_IRQ_CFIREQ }; #elif defined(CONFIG_PLAT_MAPPI3) @@ -103,11 +52,11 @@ static const int legacy_irqs[] = { 14, 15, 11, 10, 8, 12 }; static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary) { +#ifdef CONFIG_PCI struct pci_dev *p = NULL; u16 val; for_each_pci_dev(p) { - if (pci_resource_start(p, 0) == 0x1f0) *primary = 1; if (pci_resource_start(p, 2) == 0x170) @@ -122,7 +71,6 @@ static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary) /* Intel MPIIX - PIO ATA on non PCI side of bridge */ if (p->vendor == PCI_VENDOR_ID_INTEL && p->device == PCI_DEVICE_ID_INTEL_82371MX) { - pci_read_config_word(p, 0x6C, &val); if (val & 0x8000) { /* ATA port enabled */ @@ -133,11 +81,12 @@ static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary) } } } +#endif } static int __init ide_generic_init(void) { - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; unsigned long io_addr; int i, rc = 0, primary = 0, secondary = 0; @@ -164,6 +113,7 @@ static int __init ide_generic_init(void) printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " "not free.\n", DRV_NAME, io_addr, io_addr + 7); + rc = -EBUSY; continue; } @@ -172,6 +122,7 @@ static int __init ide_generic_init(void) "not free.\n", DRV_NAME, io_addr + 0x206); release_region(io_addr, 8); + rc = -EBUSY; continue; } @@ -182,9 +133,7 @@ static int __init ide_generic_init(void) #else hw.irq = legacy_irqs[i]; #endif - hw.chipset = ide_generic; - - rc = ide_host_add(NULL, hws, NULL); + rc = ide_host_add(&ide_generic_port_info, hws, 1, NULL); if (rc) { release_region(io_addr + 0x206, 1); release_region(io_addr, 8); @@ -192,10 +141,6 @@ static int __init ide_generic_init(void) } } - if (ide_generic_sysfs_init()) - printk(KERN_ERR DRV_NAME ": failed to create ide_generic " - "class\n"); - return rc; } diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c deleted file mode 100644 index 9270d3255ee..00000000000 --- a/drivers/ide/ide-h8300.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * H8/300 generic IDE interface - */ - -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#define DRV_NAME "ide-h8300" - -#define bswap(d) \ -({ \ - u16 r; \ - __asm__("mov.b %w1,r1h\n\t" \ - "mov.b %x1,r1l\n\t" \ - "mov.w r1,%0" \ - :"=r"(r) \ - :"r"(d) \ - :"er1"); \ - (r); \ -}) - -static void mm_outw(u16 d, unsigned long a) -{ - __asm__("mov.b %w0,r2h\n\t" - "mov.b %x0,r2l\n\t" - "mov.w r2,@%1" - : - :"r"(d),"r"(a) - :"er2"); -} - -static u16 mm_inw(unsigned long a) -{ - register u16 r __asm__("er0"); - __asm__("mov.w @%1,r2\n\t" - "mov.b r2l,%x0\n\t" - "mov.b r2h,%w0" - :"=r"(r) - :"r"(a) - :"er2"); - return r; -} - -static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (task->tf_flags & IDE_TFLAG_FLAGGED) - HIHI = 0xFF; - - if (task->tf_flags & IDE_TFLAG_OUT_DATA) - mm_outw((tf->hob_data << 8) | tf->data, io_ports->data_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - outb(tf->hob_feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - outb(tf->hob_nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - outb(tf->hob_lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - outb(tf->hob_lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - outb(tf->hob_lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - outb(tf->feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - outb(tf->nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - outb(tf->lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - outb(tf->lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - outb(tf->lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); -} - -static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data = mm_inw(io_ports->data_addr); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = inb(io_ports->lbah_addr); - } -} - -static void mm_outsw(unsigned long addr, void *buf, u32 len) -{ - unsigned short *bp = (unsigned short *)buf; - for (; len > 0; len--, bp++) - *(volatile u16 *)addr = bswap(*bp); -} - -static void mm_insw(unsigned long addr, void *buf, u32 len) -{ - unsigned short *bp = (unsigned short *)buf; - for (; len > 0; len--, bp++) - *bp = bswap(*(volatile u16 *)addr); -} - -static void h8300_input_data(ide_drive_t *drive, struct request *rq, - void *buf, unsigned int len) -{ - mm_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); -} - -static void h8300_output_data(ide_drive_t *drive, struct request *rq, - void *buf, unsigned int len) -{ - mm_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); -} - -static const struct ide_tp_ops h8300_tp_ops = { - .exec_command = ide_exec_command, - .read_status = ide_read_status, - .read_altstatus = ide_read_altstatus, - - .set_irq = ide_set_irq, - - .tf_load = h8300_tf_load, - .tf_read = h8300_tf_read, - - .input_data = h8300_input_data, - .output_data = h8300_output_data, -}; - -#define H8300_IDE_GAP (2) - -static inline void hw_setup(hw_regs_t *hw) -{ - int i; - - memset(hw, 0, sizeof(hw_regs_t)); - for (i = 0; i <= 7; i++) - hw->io_ports_array[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i; - hw->io_ports.ctl_addr = CONFIG_H8300_IDE_ALT; - hw->irq = EXT_IRQ0 + CONFIG_H8300_IDE_IRQ; - hw->chipset = ide_generic; -} - -static const struct ide_port_info h8300_port_info = { - .tp_ops = &h8300_tp_ops, - .host_flags = IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA, -}; - -static int __init h8300_ide_init(void) -{ - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - - printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n"); - - if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300")) - goto out_busy; - if (!request_region(CONFIG_H8300_IDE_ALT, H8300_IDE_GAP, "ide-h8300")) { - release_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8); - goto out_busy; - } - - hw_setup(&hw); - - return ide_host_add(&h8300_port_info, hws, NULL); - -out_busy: - printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n"); - - return -EBUSY; -} - -module_init(h8300_ide_init); - -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c new file mode 100644 index 00000000000..19763977568 --- /dev/null +++ b/drivers/ide/ide-io-std.c @@ -0,0 +1,261 @@ + +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/ide.h> + +#if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \ + defined(CONFIG_PARISC) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) +#include <asm/ide.h> +#else +#include <asm-generic/ide_iops.h> +#endif + +/* + * Conventional PIO operations for ATA devices + */ + +static u8 ide_inb(unsigned long port) +{ + return (u8) inb(port); +} + +static void ide_outb(u8 val, unsigned long port) +{ + outb(val, port); +} + +/* + * MMIO operations, typically used for SATA controllers + */ + +static u8 ide_mm_inb(unsigned long port) +{ + return (u8) readb((void __iomem *) port); +} + +static void ide_mm_outb(u8 value, unsigned long port) +{ + writeb(value, (void __iomem *) port); +} + +void ide_exec_command(ide_hwif_t *hwif, u8 cmd) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); + else + outb(cmd, hwif->io_ports.command_addr); +} +EXPORT_SYMBOL_GPL(ide_exec_command); + +u8 ide_read_status(ide_hwif_t *hwif) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + return readb((void __iomem *)hwif->io_ports.status_addr); + else + return inb(hwif->io_ports.status_addr); +} +EXPORT_SYMBOL_GPL(ide_read_status); + +u8 ide_read_altstatus(ide_hwif_t *hwif) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + return readb((void __iomem *)hwif->io_ports.ctl_addr); + else + return inb(hwif->io_ports.ctl_addr); +} +EXPORT_SYMBOL_GPL(ide_read_altstatus); + +void ide_write_devctl(ide_hwif_t *hwif, u8 ctl) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); + else + outb(ctl, hwif->io_ports.ctl_addr); +} +EXPORT_SYMBOL_GPL(ide_write_devctl); + +void ide_dev_select(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 select = drive->select | ATA_DEVICE_OBS; + + if (hwif->host_flags & IDE_HFLAG_MMIO) + writeb(select, (void __iomem *)hwif->io_ports.device_addr); + else + outb(select, hwif->io_ports.device_addr); +} +EXPORT_SYMBOL_GPL(ide_dev_select); + +void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + void (*tf_outb)(u8 addr, unsigned long port); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + if (mmio) + tf_outb = ide_mm_outb; + else + tf_outb = ide_outb; + + if (valid & IDE_VALID_FEATURE) + tf_outb(tf->feature, io_ports->feature_addr); + if (valid & IDE_VALID_NSECT) + tf_outb(tf->nsect, io_ports->nsect_addr); + if (valid & IDE_VALID_LBAL) + tf_outb(tf->lbal, io_ports->lbal_addr); + if (valid & IDE_VALID_LBAM) + tf_outb(tf->lbam, io_ports->lbam_addr); + if (valid & IDE_VALID_LBAH) + tf_outb(tf->lbah, io_ports->lbah_addr); + if (valid & IDE_VALID_DEVICE) + tf_outb(tf->device, io_ports->device_addr); +} +EXPORT_SYMBOL_GPL(ide_tf_load); + +void ide_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + u8 (*tf_inb)(unsigned long port); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + if (mmio) + tf_inb = ide_mm_inb; + else + tf_inb = ide_inb; + + if (valid & IDE_VALID_ERROR) + tf->error = tf_inb(io_ports->feature_addr); + if (valid & IDE_VALID_NSECT) + tf->nsect = tf_inb(io_ports->nsect_addr); + if (valid & IDE_VALID_LBAL) + tf->lbal = tf_inb(io_ports->lbal_addr); + if (valid & IDE_VALID_LBAM) + tf->lbam = tf_inb(io_ports->lbam_addr); + if (valid & IDE_VALID_LBAH) + tf->lbah = tf_inb(io_ports->lbah_addr); + if (valid & IDE_VALID_DEVICE) + tf->device = tf_inb(io_ports->device_addr); +} +EXPORT_SYMBOL_GPL(ide_tf_read); + +/* + * Some localbus EIDE interfaces require a special access sequence + * when using 32-bit I/O instructions to transfer data. We call this + * the "vlb_sync" sequence, which consists of three successive reads + * of the sector count register location, with interrupts disabled + * to ensure that the reads all happen together. + */ +static void ata_vlb_sync(unsigned long port) +{ + (void)inb(port); + (void)inb(port); + (void)inb(port); +} + +/* + * This is used for most PIO data transfers *from* the IDE interface + * + * These routines will round up any request for an odd number of bytes, + * so if an odd len is specified, be sure that there's at least one + * extra byte allocated for the buffer. + */ +void ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, + unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long data_addr = io_ports->data_addr; + unsigned int words = (len + 1) >> 1; + u8 io_32bit = drive->io_32bit; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + if (io_32bit) { + unsigned long uninitialized_var(flags); + + if ((io_32bit & 2) && !mmio) { + local_irq_save(flags); + ata_vlb_sync(io_ports->nsect_addr); + } + + words >>= 1; + if (mmio) + __ide_mm_insl((void __iomem *)data_addr, buf, words); + else + insl(data_addr, buf, words); + + if ((io_32bit & 2) && !mmio) + local_irq_restore(flags); + + if (((len + 1) & 3) < 2) + return; + + buf += len & ~3; + words = 1; + } + + if (mmio) + __ide_mm_insw((void __iomem *)data_addr, buf, words); + else + insw(data_addr, buf, words); +} +EXPORT_SYMBOL_GPL(ide_input_data); + +/* + * This is used for most PIO data transfers *to* the IDE interface + */ +void ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, + unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long data_addr = io_ports->data_addr; + unsigned int words = (len + 1) >> 1; + u8 io_32bit = drive->io_32bit; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + if (io_32bit) { + unsigned long uninitialized_var(flags); + + if ((io_32bit & 2) && !mmio) { + local_irq_save(flags); + ata_vlb_sync(io_ports->nsect_addr); + } + + words >>= 1; + if (mmio) + __ide_mm_outsl((void __iomem *)data_addr, buf, words); + else + outsl(data_addr, buf, words); + + if ((io_32bit & 2) && !mmio) + local_irq_restore(flags); + + if (((len + 1) & 3) < 2) + return; + + buf += len & ~3; + words = 1; + } + + if (mmio) + __ide_mm_outsw((void __iomem *)data_addr, buf, words); + else + outsw(data_addr, buf, words); +} +EXPORT_SYMBOL_GPL(ide_output_data); + +const struct ide_tp_ops default_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, + + .dev_select = ide_dev_select, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index cc163319dfb..177db6d5b2f 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -40,7 +40,6 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/ide.h> -#include <linux/hdreg.h> #include <linux/completion.h> #include <linux/reboot.h> #include <linux/cdrom.h> @@ -55,25 +54,9 @@ #include <asm/uaccess.h> #include <asm/io.h> -static int __ide_end_request(ide_drive_t *drive, struct request *rq, - int uptodate, unsigned int nr_bytes, int dequeue) +int ide_end_rq(ide_drive_t *drive, struct request *rq, int error, + unsigned int nr_bytes) { - int ret = 1; - int error = 0; - - if (uptodate <= 0) - error = uptodate ? uptodate : -EIO; - - /* - * if failfast is set on a request, override number of sectors and - * complete the whole request right now - */ - if (blk_noretry_request(rq) && error) - nr_bytes = rq->hard_nr_sectors << 9; - - if (!blk_fs_request(rq) && error && !rq->errors) - rq->errors = -EIO; - /* * decide whether to reenable DMA -- 3 is a random magic for now, * if we DMA timeout more than 3 times, just stay in PIO @@ -84,255 +67,90 @@ static int __ide_end_request(ide_drive_t *drive, struct request *rq, ide_dma_on(drive); } - if (!blk_end_request(rq, error, nr_bytes)) - ret = 0; - - if (ret == 0 && dequeue) - drive->hwif->rq = NULL; - - return ret; -} - -/** - * ide_end_request - complete an IDE I/O - * @drive: IDE device for the I/O - * @uptodate: - * @nr_sectors: number of sectors completed - * - * This is our end_request wrapper function. We complete the I/O - * update random number input and dequeue the request, which if - * it was tagged may be out of order. - */ - -int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) -{ - unsigned int nr_bytes = nr_sectors << 9; - struct request *rq = drive->hwif->rq; - - if (!nr_bytes) { - if (blk_pc_request(rq)) - nr_bytes = rq->data_len; - else - nr_bytes = rq->hard_cur_sectors << 9; - } - - return __ide_end_request(drive, rq, uptodate, nr_bytes, 1); -} -EXPORT_SYMBOL(ide_end_request); - -/** - * ide_end_dequeued_request - complete an IDE I/O - * @drive: IDE device for the I/O - * @uptodate: - * @nr_sectors: number of sectors completed - * - * Complete an I/O that is no longer on the request queue. This - * typically occurs when we pull the request and issue a REQUEST_SENSE. - * We must still finish the old request but we must not tamper with the - * queue in the meantime. - * - * NOTE: This path does not handle barrier, but barrier is not supported - * on ide-cd anyway. - */ - -int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq, - int uptodate, int nr_sectors) -{ - BUG_ON(!blk_rq_started(rq)); - - return __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0); + return blk_end_request(rq, error, nr_bytes); } -EXPORT_SYMBOL_GPL(ide_end_dequeued_request); +EXPORT_SYMBOL_GPL(ide_end_rq); -/** - * ide_end_drive_cmd - end an explicit drive command - * @drive: command - * @stat: status bits - * @err: error bits - * - * Clean up after success/failure of an explicit drive command. - * These get thrown onto the queue so they are synchronized with - * real I/O operations on the drive. - * - * In LBA48 mode we have to read the register set twice to get - * all the extra information out. - */ - -void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) +void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) { - ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->rq; - - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - ide_task_t *task = (ide_task_t *)rq->special; + const struct ide_tp_ops *tp_ops = drive->hwif->tp_ops; + struct ide_taskfile *tf = &cmd->tf; + struct request *rq = cmd->rq; + u8 tf_cmd = tf->command; - if (task) { - struct ide_taskfile *tf = &task->tf; + tf->error = err; + tf->status = stat; - tf->error = err; - tf->status = stat; + if (cmd->ftf_flags & IDE_FTFLAG_IN_DATA) { + u8 data[2]; - drive->hwif->tp_ops->tf_read(drive, task); - - if (task->tf_flags & IDE_TFLAG_DYN) - kfree(task); - } - } else if (blk_pm_request(rq)) { - struct request_pm_state *pm = rq->data; + tp_ops->input_data(drive, cmd, data, 2); - ide_complete_power_step(drive, rq); - if (pm->pm_step == IDE_PM_COMPLETED) - ide_complete_pm_request(drive, rq); - return; + cmd->tf.data = data[0]; + cmd->hob.data = data[1]; } - hwif->rq = NULL; + ide_tf_readback(drive, cmd); - rq->errors = err; - - if (unlikely(blk_end_request(rq, (rq->errors ? -EIO : 0), - blk_rq_bytes(rq)))) - BUG(); -} -EXPORT_SYMBOL(ide_end_drive_cmd); - -static void ide_kill_rq(ide_drive_t *drive, struct request *rq) -{ - if (rq->rq_disk) { - struct ide_driver *drv; - - drv = *(struct ide_driver **)rq->rq_disk->private_data; - drv->end_request(drive, 0, 0); - } else - ide_end_request(drive, 0, 0); -} - -static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) -{ - ide_hwif_t *hwif = drive->hwif; - - if ((stat & ATA_BUSY) || - ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { - /* other bits are useless when BUSY */ - rq->errors |= ERROR_RESET; - } else if (stat & ATA_ERR) { - /* err has different meaning on cdrom and tape */ - if (err == ATA_ABORTED) { - if ((drive->dev_flags & IDE_DFLAG_LBA) && - /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */ - hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS) - return ide_stopped; - } else if ((err & BAD_CRC) == BAD_CRC) { - /* UDMA crc error, just retry the operation */ - drive->crc_count++; - } else if (err & (ATA_BBK | ATA_UNC)) { - /* retries won't help these */ - rq->errors = ERROR_MAX; - } else if (err & ATA_TRK0NF) { - /* help it find track zero */ - rq->errors |= ERROR_RECAL; - } + if ((cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) && + tf_cmd == ATA_CMD_IDLEIMMEDIATE) { + if (tf->lbal != 0xc4) { + printk(KERN_ERR "%s: head unload failed!\n", + drive->name); + ide_tf_dump(drive->name, cmd); + } else + drive->dev_flags |= IDE_DFLAG_PARKED; } - if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ && - (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { - int nsect = drive->mult_count ? drive->mult_count : 1; + if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { + struct ide_cmd *orig_cmd = rq->special; - ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE); - } - - if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) { - ide_kill_rq(drive, rq); - return ide_stopped; - } - - if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) - rq->errors |= ERROR_RESET; - - if ((rq->errors & ERROR_RESET) == ERROR_RESET) { - ++rq->errors; - return ide_do_reset(drive); + if (cmd->tf_flags & IDE_TFLAG_DYN) + kfree(orig_cmd); + else + memcpy(orig_cmd, cmd, sizeof(*cmd)); } - - if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) - drive->special.b.recalibrate = 1; - - ++rq->errors; - - return ide_stopped; } -static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) +int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes) { ide_hwif_t *hwif = drive->hwif; + struct request *rq = hwif->rq; + int rc; - if ((stat & ATA_BUSY) || - ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { - /* other bits are useless when BUSY */ - rq->errors |= ERROR_RESET; - } else { - /* add decoding error stuff */ - } - - if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) - /* force an abort */ - hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); + /* + * if failfast is set on a request, override number of sectors + * and complete the whole request right now + */ + if (blk_noretry_request(rq) && error <= 0) + nr_bytes = blk_rq_sectors(rq) << 9; - if (rq->errors >= ERROR_MAX) { - ide_kill_rq(drive, rq); - } else { - if ((rq->errors & ERROR_RESET) == ERROR_RESET) { - ++rq->errors; - return ide_do_reset(drive); - } - ++rq->errors; - } + rc = ide_end_rq(drive, rq, error, nr_bytes); + if (rc == 0) + hwif->rq = NULL; - return ide_stopped; + return rc; } +EXPORT_SYMBOL(ide_complete_rq); -static ide_startstop_t -__ide_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) +void ide_kill_rq(ide_drive_t *drive, struct request *rq) { - if (drive->media == ide_disk) - return ide_ata_error(drive, rq, stat, err); - return ide_atapi_error(drive, rq, stat, err); -} + u8 drv_req = (rq->cmd_type == REQ_TYPE_SPECIAL) && rq->rq_disk; + u8 media = drive->media; -/** - * ide_error - handle an error on the IDE - * @drive: drive the error occurred on - * @msg: message to report - * @stat: status bits - * - * ide_error() takes action based on the error returned by the drive. - * For normal I/O that may well include retries. We deal with - * both new-style (taskfile) and old style command handling here. - * In the case of taskfile command handling there is work left to - * do - */ - -ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat) -{ - struct request *rq; - u8 err; + drive->failed_pc = NULL; - err = ide_dump_status(drive, msg, stat); - - rq = drive->hwif->rq; - if (rq == NULL) - return ide_stopped; - - /* retry only "normal" I/O: */ - if (!blk_fs_request(rq)) { - rq->errors = 1; - ide_end_drive_cmd(drive, stat, err); - return ide_stopped; + if ((media == ide_floppy || media == ide_tape) && drv_req) { + rq->errors = 0; + } else { + if (media == ide_tape) + rq->errors = IDE_DRV_ERROR_GENERAL; + else if (rq->cmd_type != REQ_TYPE_FS && rq->errors == 0) + rq->errors = -EIO; } - return __ide_error(drive, rq, stat, err); + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); } -EXPORT_SYMBOL_GPL(ide_error); static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { @@ -356,87 +174,68 @@ static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf) tf->command = ATA_CMD_SET_MULTI; } -static ide_startstop_t ide_disk_special(ide_drive_t *drive) -{ - special_t *s = &drive->special; - ide_task_t args; - - memset(&args, 0, sizeof(ide_task_t)); - args.data_phase = TASKFILE_NO_DATA; - - if (s->b.set_geometry) { - s->b.set_geometry = 0; - ide_tf_set_specify_cmd(drive, &args.tf); - } else if (s->b.recalibrate) { - s->b.recalibrate = 0; - ide_tf_set_restore_cmd(drive, &args.tf); - } else if (s->b.set_multmode) { - s->b.set_multmode = 0; - ide_tf_set_setmult_cmd(drive, &args.tf); - } else if (s->all) { - int special = s->all; - s->all = 0; - printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special); - return ide_stopped; - } - - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE | - IDE_TFLAG_CUSTOM_HANDLER; - - do_rw_taskfile(drive, &args); - - return ide_started; -} - /** * do_special - issue some special commands * @drive: drive the command is for * * do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS, * ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive. - * - * It used to do much more, but has been scaled back. */ -static ide_startstop_t do_special (ide_drive_t *drive) +static ide_startstop_t do_special(ide_drive_t *drive) { - special_t *s = &drive->special; + struct ide_cmd cmd; #ifdef DEBUG - printk("%s: do_special: 0x%02x\n", drive->name, s->all); + printk(KERN_DEBUG "%s: %s: 0x%02x\n", drive->name, __func__, + drive->special_flags); #endif - if (drive->media == ide_disk) - return ide_disk_special(drive); + if (drive->media != ide_disk) { + drive->special_flags = 0; + drive->mult_req = 0; + return ide_stopped; + } - s->all = 0; - drive->mult_req = 0; - return ide_stopped; + memset(&cmd, 0, sizeof(cmd)); + cmd.protocol = ATA_PROT_NODATA; + + if (drive->special_flags & IDE_SFLAG_SET_GEOMETRY) { + drive->special_flags &= ~IDE_SFLAG_SET_GEOMETRY; + ide_tf_set_specify_cmd(drive, &cmd.tf); + } else if (drive->special_flags & IDE_SFLAG_RECALIBRATE) { + drive->special_flags &= ~IDE_SFLAG_RECALIBRATE; + ide_tf_set_restore_cmd(drive, &cmd.tf); + } else if (drive->special_flags & IDE_SFLAG_SET_MULTMODE) { + drive->special_flags &= ~IDE_SFLAG_SET_MULTMODE; + ide_tf_set_setmult_cmd(drive, &cmd.tf); + } else + BUG(); + + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.tf_flags = IDE_TFLAG_CUSTOM_HANDLER; + + do_rw_taskfile(drive, &cmd); + + return ide_started; } -void ide_map_sg(ide_drive_t *drive, struct request *rq) +void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; + struct request *rq = cmd->rq; - if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) { - hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); - } else { - sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE); - hwif->sg_nents = 1; - } + cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); } - EXPORT_SYMBOL_GPL(ide_map_sg); -void ide_init_sg_cmd(ide_drive_t *drive, struct request *rq) +void ide_init_sg_cmd(struct ide_cmd *cmd, unsigned int nr_bytes) { - ide_hwif_t *hwif = drive->hwif; - - hwif->nsect = hwif->nleft = rq->nr_sectors; - hwif->cursg_ofs = 0; - hwif->cursg = NULL; + cmd->nbytes = cmd->nleft = nr_bytes; + cmd->cursg_ofs = 0; + cmd->cursg = NULL; } - EXPORT_SYMBOL_GPL(ide_init_sg_cmd); /** @@ -454,24 +253,15 @@ EXPORT_SYMBOL_GPL(ide_init_sg_cmd); static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, struct request *rq) { - ide_hwif_t *hwif = drive->hwif; - ide_task_t *task = rq->special; - - if (task) { - hwif->data_phase = task->data_phase; - - switch (hwif->data_phase) { - case TASKFILE_MULTI_OUT: - case TASKFILE_OUT: - case TASKFILE_MULTI_IN: - case TASKFILE_IN: - ide_init_sg_cmd(drive, rq); - ide_map_sg(drive, rq); - default: - break; + struct ide_cmd *cmd = rq->special; + + if (cmd) { + if (cmd->protocol == ATA_PROT_PIO) { + ide_init_sg_cmd(cmd, blk_rq_sectors(rq) << 9); + ide_map_sg(drive, cmd); } - return do_rw_taskfile(drive, task); + return do_rw_taskfile(drive, cmd); } /* @@ -481,83 +271,26 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, #ifdef DEBUG printk("%s: DRIVE_CMD (null)\n", drive->name); #endif - ide_end_drive_cmd(drive, hwif->tp_ops->read_status(hwif), - ide_read_error(drive)); + rq->errors = 0; + ide_complete_rq(drive, 0, blk_rq_bytes(rq)); return ide_stopped; } -int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting, - int arg) -{ - struct request_queue *q = drive->queue; - struct request *rq; - int ret = 0; - - if (!(setting->flags & DS_SYNC)) - return setting->set(drive, arg); - - rq = blk_get_request(q, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_len = 5; - rq->cmd[0] = REQ_DEVSET_EXEC; - *(int *)&rq->cmd[1] = arg; - rq->special = setting->set; - - if (blk_execute_rq(q, NULL, rq, 0)) - ret = rq->errors; - blk_put_request(rq); - - return ret; -} -EXPORT_SYMBOL_GPL(ide_devset_execute); - static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq) { u8 cmd = rq->cmd[0]; - if (cmd == REQ_PARK_HEADS || cmd == REQ_UNPARK_HEADS) { - ide_task_t task; - struct ide_taskfile *tf = &task.tf; - - memset(&task, 0, sizeof(task)); - if (cmd == REQ_PARK_HEADS) { - drive->sleep = *(unsigned long *)rq->special; - drive->dev_flags |= IDE_DFLAG_SLEEPING; - tf->command = ATA_CMD_IDLEIMMEDIATE; - tf->feature = 0x44; - tf->lbal = 0x4c; - tf->lbam = 0x4e; - tf->lbah = 0x55; - task.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER; - } else /* cmd == REQ_UNPARK_HEADS */ - tf->command = ATA_CMD_CHK_POWER; - - task.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - task.rq = rq; - drive->hwif->data_phase = task.data_phase = TASKFILE_NO_DATA; - return do_rw_taskfile(drive, &task); - } - switch (cmd) { + case REQ_PARK_HEADS: + case REQ_UNPARK_HEADS: + return ide_do_park_unpark(drive, rq); case REQ_DEVSET_EXEC: - { - int err, (*setfunc)(ide_drive_t *, int) = rq->special; - - err = setfunc(drive, *(int *)&rq->cmd[1]); - if (err) - rq->errors = err; - else - err = 1; - ide_end_request(drive, err, 0); - return ide_stopped; - } + return ide_do_devset(drive, rq); case REQ_DRIVE_RESET: return ide_do_reset(drive); default: - blk_dump_rq_flags(rq, "ide_special_rq - bad request"); - ide_end_request(drive, 0, 0); - return ide_stopped; + BUG(); } } @@ -574,7 +307,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) { ide_startstop_t startstop; - BUG_ON(!blk_rq_started(rq)); + BUG_ON(!(rq->cmd_flags & REQ_STARTED)); #ifdef DEBUG printk("%s: start_request: current=0x%08lx\n", @@ -590,13 +323,14 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (blk_pm_request(rq)) ide_check_pm_state(drive, rq); - SELECT_DRIVE(drive); + drive->hwif->tp_ops->dev_select(drive); if (ide_wait_stat(&startstop, drive, drive->ready_stat, ATA_BUSY | ATA_DRQ, WAIT_READY)) { printk(KERN_ERR "%s: drive not ready for command\n", drive->name); return startstop; } - if (!drive->special.all) { + + if (drive->special_flags == 0) { struct ide_driver *drv; /* @@ -609,7 +343,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) return execute_drive_cmd(drive, rq); else if (blk_pm_request(rq)) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", drive->name, pm->pm_step); @@ -617,9 +351,9 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) startstop = ide_start_power_step(drive, rq); if (startstop == ide_stopped && pm->pm_step == IDE_PM_COMPLETED) - ide_complete_pm_request(drive, rq); + ide_complete_pm_rq(drive, rq); return startstop; - } else if (!rq->rq_disk && blk_special_request(rq)) + } else if (!rq->rq_disk && rq->cmd_type == REQ_TYPE_SPECIAL) /* * TODO: Once all ULDs have been modified to * check for specific op codes rather than @@ -632,7 +366,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) drv = *(struct ide_driver **)rq->rq_disk->private_data; - return drv->do_request(drive, rq, rq->sector); + return drv->do_request(drive, rq, blk_rq_pos(rq)); } return do_special(drive); kill_rq: @@ -680,8 +414,8 @@ static inline int ide_lock_host(struct ide_host *host, ide_hwif_t *hwif) if (host->host_flags & IDE_HFLAG_SERIALIZE) { rc = test_and_set_bit_lock(IDE_HOST_BUSY, &host->host_busy); if (rc == 0) { - /* for atari only */ - ide_get_lock(ide_intr, hwif); + if (host->get_lock) + host->get_lock(ide_intr, hwif); } } return rc; @@ -690,12 +424,32 @@ static inline int ide_lock_host(struct ide_host *host, ide_hwif_t *hwif) static inline void ide_unlock_host(struct ide_host *host) { if (host->host_flags & IDE_HFLAG_SERIALIZE) { - /* for atari only */ - ide_release_lock(); + if (host->release_lock) + host->release_lock(); clear_bit_unlock(IDE_HOST_BUSY, &host->host_busy); } } +static void __ide_requeue_and_plug(struct request_queue *q, struct request *rq) +{ + if (rq) + blk_requeue_request(q, rq); + if (rq || blk_peek_request(q)) { + /* Use 3ms as that was the old plug delay */ + blk_delay_queue(q, 3); + } +} + +void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq) +{ + struct request_queue *q = drive->queue; + unsigned long flags; + + spin_lock_irqsave(q->queue_lock, flags); + __ide_requeue_and_plug(q, rq); + spin_unlock_irqrestore(q->queue_lock, flags); +} + /* * Issue a new request to a device. */ @@ -706,22 +460,13 @@ void do_ide_request(struct request_queue *q) struct ide_host *host = hwif->host; struct request *rq = NULL; ide_startstop_t startstop; - - /* - * drive is doing pre-flush, ordered write, post-flush sequence. even - * though that is 3 requests, it must be seen as a single transaction. - * we must not preempt this drive until that is complete - */ - if (blk_queue_flushing(q)) - /* - * small race where queue could get replugged during - * the 3-request flush cycle, just yank the plug since - * we want it to finish asap - */ - blk_remove_plug(q); + unsigned long queue_run_ms = 3; /* old plug delay */ spin_unlock_irq(q->queue_lock); + /* HLD do_request() callback might sleep, make sure it's okay */ + might_sleep(); + if (ide_lock_host(host, hwif)) goto plug_device_2; @@ -729,25 +474,33 @@ void do_ide_request(struct request_queue *q) if (!ide_lock_port(hwif)) { ide_hwif_t *prev_port; + + WARN_ON_ONCE(hwif->rq); repeat: prev_port = hwif->host->cur_port; - hwif->rq = NULL; + if (drive->dev_flags & IDE_DFLAG_SLEEPING && + time_after(drive->sleep, jiffies)) { + unsigned long left = jiffies - drive->sleep; - if (drive->dev_flags & IDE_DFLAG_SLEEPING) { - if (time_before(drive->sleep, jiffies)) { - ide_unlock_port(hwif); - goto plug_device; - } + queue_run_ms = jiffies_to_msecs(left + 1); + ide_unlock_port(hwif); + goto plug_device; } if ((hwif->host->host_flags & IDE_HFLAG_SERIALIZE) && hwif != prev_port) { + ide_drive_t *cur_dev = + prev_port ? prev_port->cur_dev : NULL; + /* * set nIEN for previous port, drives in the - * quirk_list may not like intr setups/cleanups + * quirk list may not like intr setups/cleanups */ - if (prev_port && prev_port->cur_dev->quirk_list == 0) - prev_port->tp_ops->set_irq(prev_port, 0); + if (cur_dev && + (cur_dev->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0) + prev_port->tp_ops->write_devctl(prev_port, + ATA_NIEN | + ATA_DEVCTL_OBS); hwif->host->cur_port = hwif; } @@ -760,7 +513,9 @@ repeat: * we know that the queue isn't empty, but this can happen * if the q->prep_rq_fn() decides to kill a request */ - rq = elv_next_request(drive->queue); + if (!rq) + rq = blk_fetch_request(drive->queue); + spin_unlock_irq(q->queue_lock); spin_lock_irq(&hwif->lock); @@ -772,7 +527,7 @@ repeat: /* * Sanity: don't accept a request that isn't a PM request * if we are currently power managed. This is very important as - * blk_stop_queue() doesn't prevent the elv_next_request() + * blk_stop_queue() doesn't prevent the blk_fetch_request() * above to return us whatever is in the queue. Since we call * ide_do_request() ourselves, we end up taking requests while * the queue is blocked... @@ -796,8 +551,11 @@ repeat: startstop = start_request(drive, rq); spin_lock_irq(&hwif->lock); - if (startstop == ide_stopped) + if (startstop == ide_stopped) { + rq = hwif->rq; + hwif->rq = NULL; goto repeat; + } } else goto plug_device; out: @@ -812,77 +570,30 @@ plug_device: ide_unlock_host(host); plug_device_2: spin_lock_irq(q->queue_lock); - - if (!elv_queue_empty(q)) - blk_plug_device(q); + __ide_requeue_and_plug(q, rq); } -/* - * un-busy the port etc, and clear any pending DMA status. we want to - * retry the current request in pio mode instead of risking tossing it - * all away - */ -static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) +static int drive_is_ready(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - struct request *rq; - ide_startstop_t ret = ide_stopped; - - /* - * end current dma transaction - */ - - if (error < 0) { - printk(KERN_WARNING "%s: DMA timeout error\n", drive->name); - (void)hwif->dma_ops->dma_end(drive); - ret = ide_error(drive, "dma timeout error", - hwif->tp_ops->read_status(hwif)); - } else { - printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name); - hwif->dma_ops->dma_timeout(drive); - } + u8 stat = 0; - /* - * disable dma for now, but remember that we did so because of - * a timeout -- we'll reenable after we finish this next request - * (or rather the first chunk of it) in pio. - */ - drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY; - drive->retry_pio++; - ide_dma_off_quietly(drive); + if (drive->waiting_for_dma) + return hwif->dma_ops->dma_test_irq(drive); - /* - * un-busy drive etc and make sure request is sane - */ + if (hwif->io_ports.ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) + stat = hwif->tp_ops->read_altstatus(hwif); + else + /* Note: this may clear a pending IRQ!! */ + stat = hwif->tp_ops->read_status(hwif); - rq = hwif->rq; - if (!rq) - goto out; + if (stat & ATA_BUSY) + /* drive busy: definitely not interrupting */ + return 0; - hwif->rq = NULL; - - rq->errors = 0; - - if (!rq->bio) - goto out; - - rq->sector = rq->bio->bi_sector; - rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9; - rq->hard_cur_sectors = rq->current_nr_sectors; - rq->buffer = bio_data(rq->bio); -out: - return ret; -} - -static void ide_plug_device(ide_drive_t *drive) -{ - struct request_queue *q = drive->queue; - unsigned long flags; - - spin_lock_irqsave(q->queue_lock, flags); - if (!elv_queue_empty(q)) - blk_plug_device(q); - spin_unlock_irqrestore(q->queue_lock, flags); + /* drive ready: *might* be interrupting */ + return 1; } /** @@ -905,8 +616,9 @@ void ide_timer_expiry (unsigned long data) ide_drive_t *uninitialized_var(drive); ide_handler_t *handler; unsigned long flags; - unsigned long wait = -1; + int wait = -1; int plug_device = 0; + struct request *uninitialized_var(rq_in_flight); spin_lock_irqsave(&hwif->lock, flags); @@ -937,6 +649,7 @@ void ide_timer_expiry (unsigned long data) } } hwif->handler = NULL; + hwif->expiry = NULL; /* * We need to simulate a real interrupt when invoking * the handler() function, which means we need to @@ -952,7 +665,9 @@ void ide_timer_expiry (unsigned long data) } else if (drive_is_ready(drive)) { if (drive->waiting_for_dma) hwif->dma_ops->dma_lost_irq(drive); - (void)ide_ack_intr(hwif); + if (hwif->port_ops && hwif->port_ops->clear_irq) + hwif->port_ops->clear_irq(drive); + printk(KERN_WARNING "%s: lost interrupt\n", drive->name); startstop = handler(drive); @@ -965,7 +680,9 @@ void ide_timer_expiry (unsigned long data) } spin_lock_irq(&hwif->lock); enable_irq(hwif->irq); - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { + rq_in_flight = hwif->rq; + hwif->rq = NULL; ide_unlock_port(hwif); plug_device = 1; } @@ -974,7 +691,7 @@ void ide_timer_expiry (unsigned long data) if (plug_device) { ide_unlock_host(hwif->host); - ide_plug_device(drive); + ide_requeue_and_plug(drive, rq_in_flight); } } @@ -1053,21 +770,24 @@ static void unexpected_intr(int irq, ide_hwif_t *hwif) irqreturn_t ide_intr (int irq, void *dev_id) { ide_hwif_t *hwif = (ide_hwif_t *)dev_id; + struct ide_host *host = hwif->host; ide_drive_t *uninitialized_var(drive); ide_handler_t *handler; unsigned long flags; ide_startstop_t startstop; irqreturn_t irq_ret = IRQ_NONE; int plug_device = 0; + struct request *uninitialized_var(rq_in_flight); - if (hwif->host->host_flags & IDE_HFLAG_SERIALIZE) { - if (hwif != hwif->host->cur_port) + if (host->host_flags & IDE_HFLAG_SERIALIZE) { + if (hwif != host->cur_port) goto out_early; } spin_lock_irqsave(&hwif->lock, flags); - if (!ide_ack_intr(hwif)) + if (hwif->port_ops && hwif->port_ops->test_irq && + hwif->port_ops->test_irq(hwif) == 0) goto out; handler = hwif->handler; @@ -1084,27 +804,19 @@ irqreturn_t ide_intr (int irq, void *dev_id) * * For PCI, we cannot tell the difference, * so in that case we just ignore it and hope it goes away. - * - * FIXME: unexpected_intr should be hwif-> then we can - * remove all the ifdef PCI crap */ -#ifdef CONFIG_BLK_DEV_IDEPCI - if (hwif->chipset != ide_pci) -#endif /* CONFIG_BLK_DEV_IDEPCI */ - { + if ((host->irq_flags & IRQF_SHARED) == 0) { /* * Probably not a shared PCI interrupt, * so we can safely try to do something about it: */ unexpected_intr(irq, hwif); -#ifdef CONFIG_BLK_DEV_IDEPCI } else { /* * Whack the status register, just in case * we have a leftover pending IRQ. */ (void)hwif->tp_ops->read_status(hwif); -#endif /* CONFIG_BLK_DEV_IDEPCI */ } goto out; } @@ -1122,6 +834,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) goto out; hwif->handler = NULL; + hwif->expiry = NULL; hwif->req_gen++; del_timer(&hwif->timer); spin_unlock(&hwif->lock); @@ -1143,8 +856,10 @@ irqreturn_t ide_intr (int irq, void *dev_id) * same irq as is currently being serviced here, and Linux * won't allow another of the same (on any CPU) until we return. */ - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { BUG_ON(hwif->handler); + rq_in_flight = hwif->rq; + hwif->rq = NULL; ide_unlock_port(hwif); plug_device = 1; } @@ -1154,59 +869,12 @@ out: out_early: if (plug_device) { ide_unlock_host(hwif->host); - ide_plug_device(drive); + ide_requeue_and_plug(drive, rq_in_flight); } return irq_ret; } - -/** - * ide_do_drive_cmd - issue IDE special command - * @drive: device to issue command - * @rq: request to issue - * - * This function issues a special IDE device request - * onto the request queue. - * - * the rq is queued at the head of the request queue, displacing - * the currently-being-processed request and this function - * returns immediately without waiting for the new rq to be - * completed. This is VERY DANGEROUS, and is intended for - * careful use by the ATAPI tape/cdrom driver code. - */ - -void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq) -{ - struct request_queue *q = drive->queue; - unsigned long flags; - - drive->hwif->rq = NULL; - - spin_lock_irqsave(q->queue_lock, flags); - __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0); - spin_unlock_irqrestore(q->queue_lock, flags); -} -EXPORT_SYMBOL(ide_do_drive_cmd); - -void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma) -{ - ide_hwif_t *hwif = drive->hwif; - ide_task_t task; - - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM | - IDE_TFLAG_OUT_FEATURE | tf_flags; - task.tf.feature = dma; /* Use PIO/DMA */ - task.tf.lbam = bcount & 0xff; - task.tf.lbah = (bcount >> 8) & 0xff; - - ide_tf_dump(drive->name, &task.tf); - hwif->tp_ops->set_irq(hwif, 1); - SELECT_MASK(drive, 0); - hwif->tp_ops->tf_load(drive, &task); -} - -EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load); +EXPORT_SYMBOL_GPL(ide_intr); void ide_pad_transfer(ide_drive_t *drive, int write, int len) { diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index 1be263eb9c0..6233fa2cb8a 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -2,8 +2,10 @@ * IDE ioctls handling. */ +#include <linux/export.h> #include <linux/hdreg.h> #include <linux/ide.h> +#include <linux/slab.h> static const struct ide_ioctl_devset ide_ioctl_settings[] = { { HDIO_GET_32BIT, HDIO_SET_32BIT, &ide_devset_io_32bit }, @@ -64,7 +66,8 @@ static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd, goto out; } - id = kmalloc(size, GFP_KERNEL); + /* ata_id_to_hd_driveid() relies on 'id' to be fully allocated. */ + id = kmalloc(ATA_ID_WORDS * 2, GFP_KERNEL); if (id == NULL) { rc = -ENOMEM; goto out; @@ -111,14 +114,13 @@ static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg) return 0; } -static int ide_cmd_ioctl(ide_drive_t *drive, unsigned cmd, unsigned long arg) +static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg) { u8 *buf = NULL; int bufsize = 0, err = 0; u8 args[4], xfer_rate = 0; - ide_task_t tfargs; - struct ide_taskfile *tf = &tfargs.tf; - u16 *id = drive->id; + struct ide_cmd cmd; + struct ide_taskfile *tf = &cmd.tf; if (NULL == (void *) arg) { struct request *rq; @@ -134,24 +136,25 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned cmd, unsigned long arg) if (copy_from_user(args, (void __user *)arg, 4)) return -EFAULT; - memset(&tfargs, 0, sizeof(ide_task_t)); + memset(&cmd, 0, sizeof(cmd)); tf->feature = args[2]; if (args[0] == ATA_CMD_SMART) { tf->nsect = args[3]; tf->lbal = args[1]; - tf->lbam = 0x4f; - tf->lbah = 0xc2; - tfargs.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT; + tf->lbam = ATA_SMART_LBAM_PASS; + tf->lbah = ATA_SMART_LBAH_PASS; + cmd.valid.out.tf = IDE_VALID_OUT_TF; + cmd.valid.in.tf = IDE_VALID_NSECT; } else { tf->nsect = args[1]; - tfargs.tf_flags = IDE_TFLAG_OUT_FEATURE | - IDE_TFLAG_OUT_NSECT | IDE_TFLAG_IN_NSECT; + cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; + cmd.valid.in.tf = IDE_VALID_NSECT; } tf->command = args[0]; - tfargs.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA; + cmd.protocol = args[3] ? ATA_PROT_PIO : ATA_PROT_NODATA; if (args[3]) { - tfargs.tf_flags |= IDE_TFLAG_IO_16BIT; + cmd.tf_flags |= IDE_TFLAG_IO_16BIT; bufsize = SECTOR_SIZE * args[3]; buf = kzalloc(bufsize, GFP_KERNEL); if (buf == NULL) @@ -160,29 +163,21 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned cmd, unsigned long arg) if (tf->command == ATA_CMD_SET_FEATURES && tf->feature == SETFEATURES_XFER && - tf->nsect >= XFER_SW_DMA_0 && - (id[ATA_ID_UDMA_MODES] || - id[ATA_ID_MWDMA_MODES] || - id[ATA_ID_SWDMA_MODES])) { - xfer_rate = args[1]; - if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) { - printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " - "be set\n", drive->name); + tf->nsect >= XFER_SW_DMA_0) { + xfer_rate = ide_find_dma_mode(drive, tf->nsect); + if (xfer_rate != tf->nsect) { + err = -EINVAL; goto abort; } + + cmd.tf_flags |= IDE_TFLAG_SET_XFER; } - err = ide_raw_taskfile(drive, &tfargs, buf, args[3]); + err = ide_raw_taskfile(drive, &cmd, buf, args[3]); args[0] = tf->status; args[1] = tf->error; args[2] = tf->nsect; - - if (!err && xfer_rate) { - /* active-retuning-calls future */ - ide_set_xfer_rate(drive, xfer_rate); - ide_driveid_update(drive); - } abort: if (copy_to_user((void __user *)arg, &args, 4)) err = -EFAULT; @@ -194,25 +189,26 @@ abort: return err; } -static int ide_task_ioctl(ide_drive_t *drive, unsigned cmd, unsigned long arg) +static int ide_task_ioctl(ide_drive_t *drive, unsigned long arg) { void __user *p = (void __user *)arg; int err = 0; u8 args[7]; - ide_task_t task; + struct ide_cmd cmd; if (copy_from_user(args, p, 7)) return -EFAULT; - memset(&task, 0, sizeof(task)); - memcpy(&task.tf_array[7], &args[1], 6); - task.tf.command = args[0]; - task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + memset(&cmd, 0, sizeof(cmd)); + memcpy(&cmd.tf.feature, &args[1], 6); + cmd.tf.command = args[0]; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; - err = ide_no_data_taskfile(drive, &task); + err = ide_no_data_taskfile(drive, &cmd); - args[0] = task.tf.command; - memcpy(&args[1], &task.tf_array[7], 6); + args[0] = cmd.tf.command; + memcpy(&args[1], &cmd.tf.feature, 6); if (copy_to_user(p, args, 7)) err = -EFAULT; @@ -229,7 +225,6 @@ static int generic_drive_reset(ide_drive_t *drive) rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_len = 1; rq->cmd[0] = REQ_DRIVE_RESET; - rq->cmd_flags |= REQ_SOFTBARRIER; if (blk_execute_rq(drive->queue, NULL, rq, 1)) ret = rq->errors; blk_put_request(rq); @@ -262,17 +257,17 @@ int generic_ide_ioctl(ide_drive_t *drive, struct block_device *bdev, if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) return -EACCES; if (drive->media == ide_disk) - return ide_taskfile_ioctl(drive, cmd, arg); + return ide_taskfile_ioctl(drive, arg); return -ENOMSG; #endif case HDIO_DRIVE_CMD: if (!capable(CAP_SYS_RAWIO)) return -EACCES; - return ide_cmd_ioctl(drive, cmd, arg); + return ide_cmd_ioctl(drive, arg); case HDIO_DRIVE_TASK: if (!capable(CAP_SYS_RAWIO)) return -EACCES; - return ide_task_ioctl(drive, cmd, arg); + return ide_task_ioctl(drive, arg); case HDIO_DRIVE_RESET: if (!capable(CAP_SYS_ADMIN)) return -EACCES; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index e728cfe7273..376f2dc410c 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -27,49 +27,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -/* - * Conventional PIO operations for ATA devices - */ - -static u8 ide_inb (unsigned long port) -{ - return (u8) inb(port); -} - -static void ide_outb (u8 val, unsigned long port) -{ - outb(val, port); -} - -/* - * MMIO operations, typically used for SATA controllers - */ - -static u8 ide_mm_inb (unsigned long port) -{ - return (u8) readb((void __iomem *) port); -} - -static void ide_mm_outb (u8 value, unsigned long port) -{ - writeb(value, (void __iomem *) port); -} - -void SELECT_DRIVE (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - ide_task_t task; - - if (port_ops && port_ops->selectproc) - port_ops->selectproc(drive); - - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_OUT_DEVICE; - - drive->hwif->tp_ops->tf_load(drive, &task); -} - void SELECT_MASK(ide_drive_t *drive, int mask) { const struct ide_port_ops *port_ops = drive->hwif->port_ops; @@ -78,317 +35,16 @@ void SELECT_MASK(ide_drive_t *drive, int mask) port_ops->maskproc(drive, mask); } -void ide_exec_command(ide_hwif_t *hwif, u8 cmd) -{ - if (hwif->host_flags & IDE_HFLAG_MMIO) - writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); - else - outb(cmd, hwif->io_ports.command_addr); -} -EXPORT_SYMBOL_GPL(ide_exec_command); - -u8 ide_read_status(ide_hwif_t *hwif) -{ - if (hwif->host_flags & IDE_HFLAG_MMIO) - return readb((void __iomem *)hwif->io_ports.status_addr); - else - return inb(hwif->io_ports.status_addr); -} -EXPORT_SYMBOL_GPL(ide_read_status); - -u8 ide_read_altstatus(ide_hwif_t *hwif) -{ - if (hwif->host_flags & IDE_HFLAG_MMIO) - return readb((void __iomem *)hwif->io_ports.ctl_addr); - else - return inb(hwif->io_ports.ctl_addr); -} -EXPORT_SYMBOL_GPL(ide_read_altstatus); - -void ide_set_irq(ide_hwif_t *hwif, int on) -{ - u8 ctl = ATA_DEVCTL_OBS; - - if (on == 4) { /* hack for SRST */ - ctl |= 4; - on &= ~4; - } - - ctl |= on ? 0 : 2; - - if (hwif->host_flags & IDE_HFLAG_MMIO) - writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); - else - outb(ctl, hwif->io_ports.ctl_addr); -} -EXPORT_SYMBOL_GPL(ide_set_irq); - -void ide_tf_load(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - void (*tf_outb)(u8 addr, unsigned long port); - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (mmio) - tf_outb = ide_mm_outb; - else - tf_outb = ide_outb; - - if (task->tf_flags & IDE_TFLAG_FLAGGED) - HIHI = 0xFF; - - if (task->tf_flags & IDE_TFLAG_OUT_DATA) { - u16 data = (tf->hob_data << 8) | tf->data; - - if (mmio) - writew(data, (void __iomem *)io_ports->data_addr); - else - outw(data, io_ports->data_addr); - } - - if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - tf_outb(tf->hob_feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - tf_outb(tf->hob_nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - tf_outb(tf->hob_lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - tf_outb(tf->hob_lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - tf_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - tf_outb(tf->feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - tf_outb(tf->nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - tf_outb(tf->lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - tf_outb(tf->lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - tf_outb(tf->lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - tf_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); -} -EXPORT_SYMBOL_GPL(ide_tf_load); - -void ide_tf_read(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - void (*tf_outb)(u8 addr, unsigned long port); - u8 (*tf_inb)(unsigned long port); - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - - if (mmio) { - tf_outb = ide_mm_outb; - tf_inb = ide_mm_inb; - } else { - tf_outb = ide_outb; - tf_inb = ide_inb; - } - - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data; - - if (mmio) - data = readw((void __iomem *)io_ports->data_addr); - else - data = inw(io_ports->data_addr); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = tf_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = tf_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = tf_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = tf_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = tf_inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = tf_inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - tf_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = tf_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = tf_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = tf_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = tf_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = tf_inb(io_ports->lbah_addr); - } -} -EXPORT_SYMBOL_GPL(ide_tf_read); - -/* - * Some localbus EIDE interfaces require a special access sequence - * when using 32-bit I/O instructions to transfer data. We call this - * the "vlb_sync" sequence, which consists of three successive reads - * of the sector count register location, with interrupts disabled - * to ensure that the reads all happen together. - */ -static void ata_vlb_sync(unsigned long port) -{ - (void)inb(port); - (void)inb(port); - (void)inb(port); -} - -/* - * This is used for most PIO data transfers *from* the IDE interface - * - * These routines will round up any request for an odd number of bytes, - * so if an odd len is specified, be sure that there's at least one - * extra byte allocated for the buffer. - */ -void ide_input_data(ide_drive_t *drive, struct request *rq, void *buf, - unsigned int len) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - unsigned long data_addr = io_ports->data_addr; - u8 io_32bit = drive->io_32bit; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - - len++; - - if (io_32bit) { - unsigned long uninitialized_var(flags); - - if ((io_32bit & 2) && !mmio) { - local_irq_save(flags); - ata_vlb_sync(io_ports->nsect_addr); - } - - if (mmio) - __ide_mm_insl((void __iomem *)data_addr, buf, len / 4); - else - insl(data_addr, buf, len / 4); - - if ((io_32bit & 2) && !mmio) - local_irq_restore(flags); - - if ((len & 3) >= 2) { - if (mmio) - __ide_mm_insw((void __iomem *)data_addr, - (u8 *)buf + (len & ~3), 1); - else - insw(data_addr, (u8 *)buf + (len & ~3), 1); - } - } else { - if (mmio) - __ide_mm_insw((void __iomem *)data_addr, buf, len / 2); - else - insw(data_addr, buf, len / 2); - } -} -EXPORT_SYMBOL_GPL(ide_input_data); - -/* - * This is used for most PIO data transfers *to* the IDE interface - */ -void ide_output_data(ide_drive_t *drive, struct request *rq, void *buf, - unsigned int len) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - unsigned long data_addr = io_ports->data_addr; - u8 io_32bit = drive->io_32bit; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - - if (io_32bit) { - unsigned long uninitialized_var(flags); - - if ((io_32bit & 2) && !mmio) { - local_irq_save(flags); - ata_vlb_sync(io_ports->nsect_addr); - } - - if (mmio) - __ide_mm_outsl((void __iomem *)data_addr, buf, len / 4); - else - outsl(data_addr, buf, len / 4); - - if ((io_32bit & 2) && !mmio) - local_irq_restore(flags); - - if ((len & 3) >= 2) { - if (mmio) - __ide_mm_outsw((void __iomem *)data_addr, - (u8 *)buf + (len & ~3), 1); - else - outsw(data_addr, (u8 *)buf + (len & ~3), 1); - } - } else { - if (mmio) - __ide_mm_outsw((void __iomem *)data_addr, buf, len / 2); - else - outsw(data_addr, buf, len / 2); - } -} -EXPORT_SYMBOL_GPL(ide_output_data); - u8 ide_read_error(ide_drive_t *drive) { - ide_task_t task; + struct ide_taskfile tf; - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_IN_FEATURE; + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_ERROR); - drive->hwif->tp_ops->tf_read(drive, &task); - - return task.tf.error; + return tf.error; } EXPORT_SYMBOL_GPL(ide_read_error); -void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) -{ - ide_task_t task; - - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM | - IDE_TFLAG_IN_NSECT; - - drive->hwif->tp_ops->tf_read(drive, &task); - - *bcount = (task.tf.lbah << 8) | task.tf.lbam; - *ireason = task.tf.nsect & 3; -} -EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason); - -const struct ide_tp_ops default_tp_ops = { - .exec_command = ide_exec_command, - .read_status = ide_read_status, - .read_altstatus = ide_read_altstatus, - - .set_irq = ide_set_irq, - - .tf_load = ide_tf_load, - .tf_read = ide_tf_read, - - .input_data = ide_input_data, - .output_data = ide_output_data, -}; - void ide_fix_driveid(u16 *id) { #ifndef __LITTLE_ENDIAN @@ -410,7 +66,7 @@ void ide_fix_driveid(u16 *id) * returned by the ATA_CMD_ID_ATA[PI] commands. */ -void ide_fixstring (u8 *s, const int bytecount, const int byteswap) +void ide_fixstring(u8 *s, const int bytecount, const int byteswap) { u8 *p, *end = &s[bytecount & ~1]; /* bytecount must be even */ @@ -433,44 +89,9 @@ void ide_fixstring (u8 *s, const int bytecount, const int byteswap) while (p != end) *p++ = '\0'; } - EXPORT_SYMBOL(ide_fixstring); /* - * Needed for PCI irq sharing - */ -int drive_is_ready (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 stat = 0; - - if (drive->waiting_for_dma) - return hwif->dma_ops->dma_test_irq(drive); - - /* - * We do a passive status test under shared PCI interrupts on - * cards that truly share the ATA side interrupt, but may also share - * an interrupt with another pci card/device. We make no assumptions - * about possible isa-pnp and pci-pnp issues yet. - */ - if (hwif->io_ports.ctl_addr && - (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) - stat = hwif->tp_ops->read_altstatus(hwif); - else - /* Note: this may clear a pending IRQ!! */ - stat = hwif->tp_ops->read_status(hwif); - - if (stat & ATA_BUSY) - /* drive busy: definitely not interrupting */ - return 0; - - /* drive ready: *might* be interrupting */ - return 1; -} - -EXPORT_SYMBOL(drive_is_ready); - -/* * This routine busy-waits for the drive status to be not "busy". * It then checks the status for all of the "good" bits and none * of the "bad" bits, and if all is okay it returns 0. All other @@ -481,7 +102,8 @@ EXPORT_SYMBOL(drive_is_ready); * setting a timer to wake up at half second intervals thereafter, * until timeout is achieved, before timing out. */ -static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat) +int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, + unsigned long timeout, u8 *rstat) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; @@ -493,7 +115,7 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti stat = tp_ops->read_status(hwif); if (stat & ATA_BUSY) { - local_irq_save(flags); + local_save_flags(flags); local_irq_enable_in_hardirq(); timeout += jiffies; while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) { @@ -539,7 +161,8 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti * The caller should return the updated value of "startstop" in this case, * "startstop" is unchanged when the function returns 0. */ -int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout) +int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, + u8 bad, unsigned long timeout) { int err; u8 stat; @@ -559,7 +182,6 @@ int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 ba return err; } - EXPORT_SYMBOL(ide_wait_stat); /** @@ -580,17 +202,15 @@ int ide_in_drive_list(u16 *id, const struct drive_list_entry *table) return 1; return 0; } - EXPORT_SYMBOL_GPL(ide_in_drive_list); /* * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid. - * We list them here and depend on the device side cable detection for them. - * * Some optical devices with the buggy firmwares have the same problem. */ static const struct drive_list_entry ivb_list[] = { { "QUANTUM FIREBALLlct10 05" , "A03.0900" }, + { "QUANTUM FIREBALLlct20 30" , "APL.0900" }, { "TSSTcorp CDDVDW SH-S202J" , "SB00" }, { "TSSTcorp CDDVDW SH-S202J" , "SB01" }, { "TSSTcorp CDDVDW SH-S202N" , "SB00" }, @@ -605,13 +225,13 @@ static const struct drive_list_entry ivb_list[] = { * All hosts that use the 80c ribbon must use! * The name is derived from upper byte of word 93 and the 80c ribbon. */ -u8 eighty_ninty_three (ide_drive_t *drive) +u8 eighty_ninty_three(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; u16 *id = drive->id; int ivb = ide_in_drive_list(id, ivb_list); - if (hwif->cbl == ATA_CBL_PATA40_SHORT) + if (hwif->cbl == ATA_CBL_SATA || hwif->cbl == ATA_CBL_PATA40_SHORT) return 1; if (ivb) @@ -630,10 +250,25 @@ u8 eighty_ninty_three (ide_drive_t *drive) * - force bit13 (80c cable present) check also for !ivb devices * (unless the slave device is pre-ATA3) */ - if ((id[ATA_ID_HW_CONFIG] & 0x4000) || - (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000))) + if (id[ATA_ID_HW_CONFIG] & 0x4000) return 1; + if (ivb) { + const char *model = (char *)&id[ATA_ID_PROD]; + + if (strstr(model, "TSSTcorp CDDVDW SH-S202")) { + /* + * These ATAPI devices always report 80c cable + * so we have to depend on the host in this case. + */ + if (hwif->cbl == ATA_CBL_PATA80) + return 1; + } else { + /* Depend on the device side cable detection. */ + if (id[ATA_ID_HW_CONFIG] & 0x2000) + return 1; + } + } no_80w: if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED) return 0; @@ -648,71 +283,70 @@ no_80w: return 0; } -int ide_driveid_update(ide_drive_t *drive) +static const char *nien_quirk_list[] = { + "QUANTUM FIREBALLlct08 08", + "QUANTUM FIREBALLP KA6.4", + "QUANTUM FIREBALLP KA9.1", + "QUANTUM FIREBALLP KX13.6", + "QUANTUM FIREBALLP KX20.5", + "QUANTUM FIREBALLP KX27.3", + "QUANTUM FIREBALLP LM20.4", + "QUANTUM FIREBALLP LM20.5", + "FUJITSU MHZ2160BH G2", + NULL +}; + +void ide_check_nien_quirk_list(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - u16 *id; - unsigned long flags; - u8 stat; + const char **list, *m = (char *)&drive->id[ATA_ID_PROD]; - /* - * Re-read drive->id for possible DMA mode - * change (copied from ide-probe.c) - */ + for (list = nien_quirk_list; *list != NULL; list++) + if (strstr(m, *list) != NULL) { + drive->dev_flags |= IDE_DFLAG_NIEN_QUIRK; + return; + } +} - SELECT_MASK(drive, 1); - tp_ops->set_irq(hwif, 0); - msleep(50); - tp_ops->exec_command(hwif, ATA_CMD_ID_ATA); +int ide_driveid_update(ide_drive_t *drive) +{ + u16 *id; + int rc; - if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 1)) { - SELECT_MASK(drive, 0); + id = kmalloc(SECTOR_SIZE, GFP_ATOMIC); + if (id == NULL) return 0; - } - - msleep(50); /* wait for IRQ and ATA_DRQ */ - stat = tp_ops->read_status(hwif); - if (!OK_STAT(stat, ATA_DRQ, BAD_R_STAT)) { - SELECT_MASK(drive, 0); - printk("%s: CHECK for good STATUS\n", drive->name); - return 0; - } - local_irq_save(flags); + SELECT_MASK(drive, 1); + rc = ide_dev_read_id(drive, ATA_CMD_ID_ATA, id, 1); SELECT_MASK(drive, 0); - id = kmalloc(SECTOR_SIZE, GFP_ATOMIC); - if (!id) { - local_irq_restore(flags); - return 0; - } - tp_ops->input_data(drive, NULL, id, SECTOR_SIZE); - (void)tp_ops->read_status(hwif); /* clear drive IRQ */ - local_irq_enable(); - local_irq_restore(flags); - ide_fix_driveid(id); + + if (rc) + goto out_err; drive->id[ATA_ID_UDMA_MODES] = id[ATA_ID_UDMA_MODES]; drive->id[ATA_ID_MWDMA_MODES] = id[ATA_ID_MWDMA_MODES]; drive->id[ATA_ID_SWDMA_MODES] = id[ATA_ID_SWDMA_MODES]; + drive->id[ATA_ID_CFA_MODES] = id[ATA_ID_CFA_MODES]; /* anything more ? */ kfree(id); - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive)) - ide_dma_off(drive); - return 1; +out_err: + if (rc == 2) + printk(KERN_ERR "%s: %s: bad status\n", drive->name, __func__); + kfree(id); + return 0; } int ide_config_drive_speed(ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; + struct ide_taskfile tf; u16 *id = drive->id, i; int error = 0; u8 stat; - ide_task_t task; #ifdef CONFIG_BLK_DEV_IDEDMA if (hwif->dma_ops) /* check if host supports DMA */ @@ -729,35 +363,23 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) * but for some reason these don't work at * this point (lost interrupt). */ - /* - * Select the drive, and issue the SETFEATURES command - */ - disable_irq_nosync(hwif->irq); - - /* - * FIXME: we race against the running IRQ here if - * this is called from non IRQ context. If we use - * disable_irq() we hang on the error path. Work - * is needed. - */ - + udelay(1); - SELECT_DRIVE(drive); + tp_ops->dev_select(drive); SELECT_MASK(drive, 1); udelay(1); - tp_ops->set_irq(hwif, 0); + tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS); - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT; - task.tf.feature = SETFEATURES_XFER; - task.tf.nsect = speed; + memset(&tf, 0, sizeof(tf)); + tf.feature = SETFEATURES_XFER; + tf.nsect = speed; - tp_ops->tf_load(drive, &task); + tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE | IDE_VALID_NSECT); tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES); - if (drive->quirk_list == 2) - tp_ops->set_irq(hwif, 1); + if (drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) + tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); error = __ide_wait_stat(drive, drive->ready_stat, ATA_BUSY | ATA_DRQ | ATA_ERR, @@ -765,16 +387,19 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) SELECT_MASK(drive, 0); - enable_irq(hwif->irq); - if (error) { (void) ide_dump_status(drive, "set_drive_speed_status", stat); return error; } - id[ATA_ID_UDMA_MODES] &= ~0xFF00; - id[ATA_ID_MWDMA_MODES] &= ~0x0F00; - id[ATA_ID_SWDMA_MODES] &= ~0x0F00; + if (speed >= XFER_SW_DMA_0) { + id[ATA_ID_UDMA_MODES] &= ~0xFF00; + id[ATA_ID_MWDMA_MODES] &= ~0x0700; + id[ATA_ID_SWDMA_MODES] &= ~0x0700; + if (ata_id_is_cfa(id)) + id[ATA_ID_CFA_MODES] &= ~0x0E00; + } else if (ata_id_is_cfa(id)) + id[ATA_ID_CFA_MODES] &= ~0x01C0; skip: #ifdef CONFIG_BLK_DEV_IDEDMA @@ -787,12 +412,18 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) if (speed >= XFER_UDMA_0) { i = 1 << (speed - XFER_UDMA_0); id[ATA_ID_UDMA_MODES] |= (i << 8 | i); + } else if (ata_id_is_cfa(id) && speed >= XFER_MW_DMA_3) { + i = speed - XFER_MW_DMA_2; + id[ATA_ID_CFA_MODES] |= i << 9; } else if (speed >= XFER_MW_DMA_0) { i = 1 << (speed - XFER_MW_DMA_0); id[ATA_ID_MWDMA_MODES] |= (i << 8 | i); } else if (speed >= XFER_SW_DMA_0) { i = 1 << (speed - XFER_SW_DMA_0); id[ATA_ID_SWDMA_MODES] |= (i << 8 | i); + } else if (ata_id_is_cfa(id) && speed >= XFER_PIO_5) { + i = speed - XFER_PIO_4; + id[ATA_ID_CFA_MODES] |= i << 6; } if (!drive->init_speed) @@ -810,55 +441,55 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) * * See also ide_execute_command */ -static void __ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, - unsigned int timeout, ide_expiry_t *expiry) +void __ide_set_handler(ide_drive_t *drive, ide_handler_t *handler, + unsigned int timeout) { ide_hwif_t *hwif = drive->hwif; BUG_ON(hwif->handler); hwif->handler = handler; - hwif->expiry = expiry; hwif->timer.expires = jiffies + timeout; hwif->req_gen_timer = hwif->req_gen; add_timer(&hwif->timer); } -void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, - unsigned int timeout, ide_expiry_t *expiry) +void ide_set_handler(ide_drive_t *drive, ide_handler_t *handler, + unsigned int timeout) { ide_hwif_t *hwif = drive->hwif; unsigned long flags; spin_lock_irqsave(&hwif->lock, flags); - __ide_set_handler(drive, handler, timeout, expiry); + __ide_set_handler(drive, handler, timeout); spin_unlock_irqrestore(&hwif->lock, flags); } - EXPORT_SYMBOL(ide_set_handler); - + /** * ide_execute_command - execute an IDE command * @drive: IDE drive to issue the command against - * @command: command byte to write + * @cmd: command * @handler: handler for next phase * @timeout: timeout for command - * @expiry: handler to run on timeout * * Helper function to issue an IDE command. This handles the - * atomicity requirements, command timing and ensures that the + * atomicity requirements, command timing and ensures that the * handler and IRQ setup do not race. All IDE command kick off * should go via this function or do equivalent locking. */ -void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, - unsigned timeout, ide_expiry_t *expiry) +void ide_execute_command(ide_drive_t *drive, struct ide_cmd *cmd, + ide_handler_t *handler, unsigned timeout) { ide_hwif_t *hwif = drive->hwif; unsigned long flags; spin_lock_irqsave(&hwif->lock, flags); - __ide_set_handler(drive, handler, timeout, expiry); - hwif->tp_ops->exec_command(hwif, cmd); + if ((cmd->protocol != ATAPI_PROT_DMA && + cmd->protocol != ATAPI_PROT_PIO) || + (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT)) + __ide_set_handler(drive, handler, timeout); + hwif->tp_ops->exec_command(hwif, cmd->tf.command); /* * Drive takes 400nS to respond, we must avoid the IRQ being * serviced before that. @@ -868,314 +499,6 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, ndelay(400); spin_unlock_irqrestore(&hwif->lock, flags); } -EXPORT_SYMBOL(ide_execute_command); - -void ide_execute_pkt_cmd(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - unsigned long flags; - - spin_lock_irqsave(&hwif->lock, flags); - hwif->tp_ops->exec_command(hwif, ATA_CMD_PACKET); - ndelay(400); - spin_unlock_irqrestore(&hwif->lock, flags); -} -EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd); - -static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) -{ - struct request *rq = drive->hwif->rq; - - if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) - ide_end_request(drive, err ? err : 1, 0); -} - -/* needed below */ -static ide_startstop_t do_reset1 (ide_drive_t *, int); - -/* - * atapi_reset_pollfunc() gets invoked to poll the interface for completion every 50ms - * during an atapi drive reset operation. If the drive has not yet responded, - * and we have not yet hit our maximum waiting time, then the timer is restarted - * for another 50ms. - */ -static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 stat; - - SELECT_DRIVE(drive); - udelay (10); - stat = hwif->tp_ops->read_status(hwif); - - if (OK_STAT(stat, 0, ATA_BUSY)) - printk("%s: ATAPI reset complete\n", drive->name); - else { - if (time_before(jiffies, hwif->poll_timeout)) { - ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); - /* continue polling */ - return ide_started; - } - /* end of polling */ - hwif->polling = 0; - printk("%s: ATAPI reset timed-out, status=0x%02x\n", - drive->name, stat); - /* do it the old fashioned way */ - return do_reset1(drive, 1); - } - /* done polling */ - hwif->polling = 0; - ide_complete_drive_reset(drive, 0); - return ide_stopped; -} - -static void ide_reset_report_error(ide_hwif_t *hwif, u8 err) -{ - static const char *err_master_vals[] = - { NULL, "passed", "formatter device error", - "sector buffer error", "ECC circuitry error", - "controlling MPU error" }; - - u8 err_master = err & 0x7f; - - printk(KERN_ERR "%s: reset: master: ", hwif->name); - if (err_master && err_master < 6) - printk(KERN_CONT "%s", err_master_vals[err_master]); - else - printk(KERN_CONT "error (0x%02x?)", err); - if (err & 0x80) - printk(KERN_CONT "; slave: failed"); - printk(KERN_CONT "\n"); -} - -/* - * reset_pollfunc() gets invoked to poll the interface for completion every 50ms - * during an ide reset operation. If the drives have not yet responded, - * and we have not yet hit our maximum waiting time, then the timer is restarted - * for another 50ms. - */ -static ide_startstop_t reset_pollfunc (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - u8 tmp; - int err = 0; - - if (port_ops && port_ops->reset_poll) { - err = port_ops->reset_poll(drive); - if (err) { - printk(KERN_ERR "%s: host reset_poll failure for %s.\n", - hwif->name, drive->name); - goto out; - } - } - - tmp = hwif->tp_ops->read_status(hwif); - - if (!OK_STAT(tmp, 0, ATA_BUSY)) { - if (time_before(jiffies, hwif->poll_timeout)) { - ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); - /* continue polling */ - return ide_started; - } - printk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp); - drive->failures++; - err = -EIO; - } else { - tmp = ide_read_error(drive); - - if (tmp == 1) { - printk(KERN_INFO "%s: reset: success\n", hwif->name); - drive->failures = 0; - } else { - ide_reset_report_error(hwif, tmp); - drive->failures++; - err = -EIO; - } - } -out: - hwif->polling = 0; /* done polling */ - ide_complete_drive_reset(drive, err); - return ide_stopped; -} - -static void ide_disk_pre_reset(ide_drive_t *drive) -{ - int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1; - - drive->special.all = 0; - drive->special.b.set_geometry = legacy; - drive->special.b.recalibrate = legacy; - - drive->mult_count = 0; - drive->dev_flags &= ~IDE_DFLAG_PARKED; - - if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 && - (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) - drive->mult_req = 0; - - if (drive->mult_req != drive->mult_count) - drive->special.b.set_multmode = 1; -} - -static void pre_reset(ide_drive_t *drive) -{ - const struct ide_port_ops *port_ops = drive->hwif->port_ops; - - if (drive->media == ide_disk) - ide_disk_pre_reset(drive); - else - drive->dev_flags |= IDE_DFLAG_POST_RESET; - - if (drive->dev_flags & IDE_DFLAG_USING_DMA) { - if (drive->crc_count) - ide_check_dma_crc(drive); - else - ide_dma_off(drive); - } - - if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) { - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) { - drive->dev_flags &= ~IDE_DFLAG_UNMASK; - drive->io_32bit = 0; - } - return; - } - - if (port_ops && port_ops->pre_reset) - port_ops->pre_reset(drive); - - if (drive->current_speed != 0xff) - drive->desired_speed = drive->current_speed; - drive->current_speed = 0xff; -} - -/* - * do_reset1() attempts to recover a confused drive by resetting it. - * Unfortunately, resetting a disk drive actually resets all devices on - * the same interface, so it can really be thought of as resetting the - * interface rather than resetting the drive. - * - * ATAPI devices have their own reset mechanism which allows them to be - * individually reset without clobbering other devices on the same interface. - * - * Unfortunately, the IDE interface does not generate an interrupt to let - * us know when the reset operation has finished, so we must poll for this. - * Equally poor, though, is the fact that this may a very long time to complete, - * (up to 30 seconds worstcase). So, instead of busy-waiting here for it, - * we set a timer to poll at 50ms intervals. - */ -static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - const struct ide_port_ops *port_ops; - ide_drive_t *tdrive; - unsigned long flags, timeout; - int i; - DEFINE_WAIT(wait); - - spin_lock_irqsave(&hwif->lock, flags); - - /* We must not reset with running handlers */ - BUG_ON(hwif->handler != NULL); - - /* For an ATAPI device, first try an ATAPI SRST. */ - if (drive->media != ide_disk && !do_not_try_atapi) { - pre_reset(drive); - SELECT_DRIVE(drive); - udelay (20); - tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); - ndelay(400); - hwif->poll_timeout = jiffies + WAIT_WORSTCASE; - hwif->polling = 1; - __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); - spin_unlock_irqrestore(&hwif->lock, flags); - return ide_started; - } - - /* We must not disturb devices in the IDE_DFLAG_PARKED state. */ - do { - unsigned long now; - - prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE); - timeout = jiffies; - ide_port_for_each_dev(i, tdrive, hwif) { - if (tdrive->dev_flags & IDE_DFLAG_PRESENT && - tdrive->dev_flags & IDE_DFLAG_PARKED && - time_after(tdrive->sleep, timeout)) - timeout = tdrive->sleep; - } - - now = jiffies; - if (time_before_eq(timeout, now)) - break; - - spin_unlock_irqrestore(&hwif->lock, flags); - timeout = schedule_timeout_uninterruptible(timeout - now); - spin_lock_irqsave(&hwif->lock, flags); - } while (timeout); - finish_wait(&ide_park_wq, &wait); - - /* - * First, reset any device state data we were maintaining - * for any of the drives on this interface. - */ - ide_port_for_each_dev(i, tdrive, hwif) - pre_reset(tdrive); - - if (io_ports->ctl_addr == 0) { - spin_unlock_irqrestore(&hwif->lock, flags); - ide_complete_drive_reset(drive, -ENXIO); - return ide_stopped; - } - - /* - * Note that we also set nIEN while resetting the device, - * to mask unwanted interrupts from the interface during the reset. - * However, due to the design of PC hardware, this will cause an - * immediate interrupt due to the edge transition it produces. - * This single interrupt gives us a "fast poll" for drives that - * recover from reset very quickly, saving us the first 50ms wait time. - * - * TODO: add ->softreset method and stop abusing ->set_irq - */ - /* set SRST and nIEN */ - tp_ops->set_irq(hwif, 4); - /* more than enough time */ - udelay(10); - /* clear SRST, leave nIEN (unless device is on the quirk list) */ - tp_ops->set_irq(hwif, drive->quirk_list == 2); - /* more than enough time */ - udelay(10); - hwif->poll_timeout = jiffies + WAIT_WORSTCASE; - hwif->polling = 1; - __ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); - - /* - * Some weird controller like resetting themselves to a strange - * state when the disks are reset this way. At least, the Winbond - * 553 documentation says that - */ - port_ops = hwif->port_ops; - if (port_ops && port_ops->resetproc) - port_ops->resetproc(drive); - - spin_unlock_irqrestore(&hwif->lock, flags); - return ide_started; -} - -/* - * ide_do_reset() is the entry point to the drive/interface reset code. - */ - -ide_startstop_t ide_do_reset (ide_drive_t *drive) -{ - return do_reset1(drive, 0); -} - -EXPORT_SYMBOL(ide_do_reset); /* * ide_wait_not_busy() waits for the currently selected device on the hwif @@ -1185,7 +508,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout) { u8 stat = 0; - while(timeout--) { + while (timeout--) { /* * Turn this into a schedule() sleep once I'm sure * about locking issues (2.5 work ?). diff --git a/drivers/ide/ide-legacy.c b/drivers/ide/ide-legacy.c index 8c5dcbf2254..30fe3630734 100644 --- a/drivers/ide/ide-legacy.c +++ b/drivers/ide/ide-legacy.c @@ -1,7 +1,8 @@ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/ide.h> -static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw, +static void ide_legacy_init_one(struct ide_hw **hws, struct ide_hw *hw, u8 port_no, const struct ide_port_info *d, unsigned long config) { @@ -33,7 +34,6 @@ static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw, ide_std_init_ports(hw, base, ctl); hw->irq = irq; - hw->chipset = d->chipset; hw->config = config; hws[port_no] = hw; @@ -41,7 +41,7 @@ static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw, int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config) { - hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL }; + struct ide_hw hw[2], *hws[] = { NULL, NULL }; memset(&hw, 0, sizeof(hw)); @@ -53,6 +53,6 @@ int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config) (d->host_flags & IDE_HFLAG_SINGLE)) return -ENOENT; - return ide_host_add(d, hws, NULL); + return ide_host_add(d, hws, 2, NULL); } EXPORT_SYMBOL_GPL(ide_legacy_device_add); diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 09526a0de73..d9c9829c8b2 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -1,167 +1,11 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/ide.h> #include <linux/bitops.h> -static const char *udma_str[] = - { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", - "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; -static const char *mwdma_str[] = - { "MWDMA0", "MWDMA1", "MWDMA2" }; -static const char *swdma_str[] = - { "SWDMA0", "SWDMA1", "SWDMA2" }; -static const char *pio_str[] = - { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" }; - -/** - * ide_xfer_verbose - return IDE mode names - * @mode: transfer mode - * - * Returns a constant string giving the name of the mode - * requested. - */ - -const char *ide_xfer_verbose(u8 mode) -{ - const char *s; - u8 i = mode & 0xf; - - if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) - s = udma_str[i]; - else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2) - s = mwdma_str[i]; - else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) - s = swdma_str[i]; - else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5) - s = pio_str[i & 0x7]; - else if (mode == XFER_PIO_SLOW) - s = "PIO SLOW"; - else - s = "XFER ERROR"; - - return s; -} -EXPORT_SYMBOL(ide_xfer_verbose); - -/** - * ide_rate_filter - filter transfer mode - * @drive: IDE device - * @speed: desired speed - * - * Given the available transfer modes this function returns - * the best available speed at or below the speed requested. - * - * TODO: check device PIO capabilities - */ - -static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mode = ide_find_dma_mode(drive, speed); - - if (mode == 0) { - if (hwif->pio_mask) - mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; - else - mode = XFER_PIO_4; - } - -/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */ - - return min(speed, mode); -} - -/** - * ide_get_best_pio_mode - get PIO mode from drive - * @drive: drive to consider - * @mode_wanted: preferred mode - * @max_mode: highest allowed mode - * - * This routine returns the recommended PIO settings for a given drive, - * based on the drive->id information and the ide_pio_blacklist[]. - * - * Drive PIO mode is auto-selected if 255 is passed as mode_wanted. - * This is used by most chipset support modules when "auto-tuning". - */ - -u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) -{ - u16 *id = drive->id; - int pio_mode = -1, overridden = 0; - - if (mode_wanted != 255) - return min_t(u8, mode_wanted, max_mode); - - if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0) - pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]); - - if (pio_mode != -1) { - printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); - } else { - pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8; - if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ - pio_mode = 2; - overridden = 1; - } - - if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */ - if (ata_id_has_iordy(id)) { - if (id[ATA_ID_PIO_MODES] & 7) { - overridden = 0; - if (id[ATA_ID_PIO_MODES] & 4) - pio_mode = 5; - else if (id[ATA_ID_PIO_MODES] & 2) - pio_mode = 4; - else - pio_mode = 3; - } - } - } - - if (overridden) - printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", - drive->name); - } - - if (pio_mode > max_mode) - pio_mode = max_mode; - - return pio_mode; -} -EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); - -/* req_pio == "255" for auto-tune */ -void ide_set_pio(ide_drive_t *drive, u8 req_pio) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - u8 host_pio, pio; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return; - - BUG_ON(hwif->pio_mask == 0x00); - - host_pio = fls(hwif->pio_mask) - 1; - - pio = ide_get_best_pio_mode(drive, req_pio, host_pio); - - /* - * TODO: - * - report device max PIO mode - * - check req_pio != 255 against device max PIO mode - */ - printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", - drive->name, host_pio, req_pio, - req_pio == 255 ? "(auto-tune)" : "", pio); - - (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); -} -EXPORT_SYMBOL_GPL(ide_set_pio); - /** * ide_toggle_bounce - handle bounce buffering * @drive: drive to update @@ -188,117 +32,17 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } -int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 0; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL) - return -1; - - /* - * TODO: temporary hack for some legacy host drivers that didn't - * set transfer mode on the device in ->set_pio_mode method... - */ - if (port_ops->set_dma_mode == NULL) { - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); - return 0; - } - - if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { - if (ide_config_drive_speed(drive, mode)) - return -1; - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); - return 0; - } else { - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); - return ide_config_drive_speed(drive, mode); - } -} - -int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 0; - - if (port_ops == NULL || port_ops->set_dma_mode == NULL) - return -1; - - if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { - if (ide_config_drive_speed(drive, mode)) - return -1; - port_ops->set_dma_mode(drive, mode); - return 0; - } else { - port_ops->set_dma_mode(drive, mode); - return ide_config_drive_speed(drive, mode); - } -} -EXPORT_SYMBOL_GPL(ide_set_dma_mode); - -/** - * ide_set_xfer_rate - set transfer rate - * @drive: drive to set - * @rate: speed to attempt to set - * - * General helper for setting the speed of an IDE device. This - * function knows about user enforced limits from the configuration - * which ->set_pio_mode/->set_dma_mode does not. - */ - -int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (port_ops == NULL || port_ops->set_dma_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return -1; - - rate = ide_rate_filter(drive, rate); - - BUG_ON(rate < XFER_PIO_0); - - if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) - return ide_set_pio_mode(drive, rate); - - return ide_set_dma_mode(drive, rate); -} - -static void ide_dump_opcode(ide_drive_t *drive) -{ - struct request *rq = drive->hwif->rq; - ide_task_t *task = NULL; - - if (!rq) - return; - - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) - task = rq->special; - - printk(KERN_ERR "ide: failed opcode was: "); - if (task == NULL) - printk(KERN_CONT "unknown\n"); - else - printk(KERN_CONT "0x%02x\n", task->tf.command); -} - -u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48) +u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48) { + struct ide_taskfile *tf = &cmd->tf; u32 high, low; - if (lba48) - high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | - tf->hob_lbal; - else - high = tf->device & 0xf; low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; + if (lba48) { + tf = &cmd->hob; + high = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; + } else + high = tf->device & 0xf; return ((u64)high << 24) | low; } @@ -306,22 +50,23 @@ EXPORT_SYMBOL_GPL(ide_get_lba_addr); static void ide_dump_sector(ide_drive_t *drive) { - ide_task_t task; - struct ide_taskfile *tf = &task.tf; + struct ide_cmd cmd; + struct ide_taskfile *tf = &cmd.tf; u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); - memset(&task, 0, sizeof(task)); - if (lba48) - task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_HOB_LBA | - IDE_TFLAG_LBA48; - else - task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE; + memset(&cmd, 0, sizeof(cmd)); + if (lba48) { + cmd.valid.in.tf = IDE_VALID_LBA; + cmd.valid.in.hob = IDE_VALID_LBA; + cmd.tf_flags = IDE_TFLAG_LBA48; + } else + cmd.valid.in.tf = IDE_VALID_LBA | IDE_VALID_DEVICE; - drive->hwif->tp_ops->tf_read(drive, &task); + ide_tf_readback(drive, &cmd); if (lba48 || (tf->device & ATA_LBA)) printk(KERN_CONT ", LBAsect=%llu", - (unsigned long long)ide_get_lba_addr(tf, lba48)); + (unsigned long long)ide_get_lba_addr(&cmd, lba48)); else printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, tf->device & 0xf, tf->lbal); @@ -329,7 +74,7 @@ static void ide_dump_sector(ide_drive_t *drive) static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATA_ABORTED) printk(KERN_CONT "DriveStatusError "); if (err & ATA_ICRC) @@ -352,14 +97,14 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err) if (rq) printk(KERN_CONT ", sector=%llu", - (unsigned long long)rq->sector); + (unsigned long long)blk_rq_pos(rq)); } printk(KERN_CONT "\n"); } static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATAPI_ILI) printk(KERN_CONT "IllegalLengthIndication "); if (err & ATAPI_EOM) @@ -417,7 +162,10 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) else ide_dump_atapi_error(drive, err); } - ide_dump_opcode(drive); + + printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n", + drive->name, drive->hwif->cmd.tf.command); + return err; } EXPORT_SYMBOL(ide_dump_status); diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index c875a957596..f41558a0bcd 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -1,4 +1,5 @@ #include <linux/kernel.h> +#include <linux/gfp.h> #include <linux/ide.h> #include <linux/jiffies.h> #include <linux/blkdev.h> @@ -24,11 +25,8 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) start_queue = 1; spin_unlock_irq(&hwif->lock); - if (start_queue) { - spin_lock_irq(q->queue_lock); - blk_start_queueing(q); - spin_unlock_irq(q->queue_lock); - } + if (start_queue) + blk_run_queue(q); return; } spin_unlock_irq(&hwif->lock); @@ -54,12 +52,39 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) rq->cmd[0] = REQ_UNPARK_HEADS; rq->cmd_len = 1; rq->cmd_type = REQ_TYPE_SPECIAL; - elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 1); + elv_add_request(q, rq, ELEVATOR_INSERT_FRONT); out: return; } +ide_startstop_t ide_do_park_unpark(ide_drive_t *drive, struct request *rq) +{ + struct ide_cmd cmd; + struct ide_taskfile *tf = &cmd.tf; + + memset(&cmd, 0, sizeof(cmd)); + if (rq->cmd[0] == REQ_PARK_HEADS) { + drive->sleep = *(unsigned long *)rq->special; + drive->dev_flags |= IDE_DFLAG_SLEEPING; + tf->command = ATA_CMD_IDLEIMMEDIATE; + tf->feature = 0x44; + tf->lbal = 0x4c; + tf->lbam = 0x4e; + tf->lbah = 0x55; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + } else /* cmd == REQ_UNPARK_HEADS */ + tf->command = ATA_CMD_CHK_POWER; + + cmd.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER; + cmd.protocol = ATA_PROT_NODATA; + + cmd.rq = rq; + + return do_rw_taskfile(drive, &cmd); +} + ssize_t ide_park_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -91,8 +116,10 @@ ssize_t ide_park_store(struct device *dev, struct device_attribute *attr, long int input; int rc; - rc = strict_strtol(buf, 10, &input); - if (rc || input < -2) + rc = kstrtol(buf, 10, &input); + if (rc) + return rc; + if (input < -2) return -EINVAL; if (input > MAX_PARK_TIMEOUT) { input = MAX_PARK_TIMEOUT; diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index bddae2b329a..673420db953 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -28,12 +28,20 @@ #define DRV_NAME "ide_pci_generic" -static int ide_generic_all; /* Set to claim all devices */ +static bool ide_generic_all; /* Set to claim all devices */ module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); -#define IDE_HFLAGS_UMC (IDE_HFLAG_NO_DMA | IDE_HFLAG_FORCE_LEGACY_IRQS) +static void netcell_quirkproc(ide_drive_t *drive) +{ + /* mark words 85-87 as valid */ + drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000; +} + +static const struct ide_port_ops netcell_port_ops = { + .quirkproc = netcell_quirkproc, +}; #define DECLARE_GENERIC_PCI_DEV(extra_flags) \ { \ @@ -45,7 +53,7 @@ MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE st .udma_mask = ATA_UDMA6, \ } -static const struct ide_port_info generic_chipsets[] __devinitdata = { +static const struct ide_port_info generic_chipsets[] = { /* 0: Unknown */ DECLARE_GENERIC_PCI_DEV(0), @@ -61,7 +69,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { /* 2: SAMURAI / HT6565 / HINT_IDE */ DECLARE_GENERIC_PCI_DEV(0), /* 3: UM8673F / UM8886A / UM8886BF */ - DECLARE_GENERIC_PCI_DEV(IDE_HFLAGS_UMC), + DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_DMA), /* 4: VIA_IDE / OPTI621V / Piccolo010{2,3,5} */ DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_AUTODMA), @@ -76,6 +84,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { { /* 6: Revolution */ .name = DRV_NAME, + .port_ops = &netcell_port_ops, .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | IDE_HFLAG_TRUST_BIOS_FOR_DMA | IDE_HFLAG_OFF_BOARD, @@ -94,7 +103,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &generic_chipsets[id->driver_data]; int ret = -ENODEV; @@ -153,9 +162,10 @@ static const struct pci_device_id generic_pci_tbl[] = { #ifdef CONFIG_BLK_DEV_IDE_SATA { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237_SATA), 5 }, #endif - { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO), 4 }, { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), 4 }, { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), 4 }, + { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), 4 }, + { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), 4 }, { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), 6 }, /* * Must come last. If you add entries adjust diff --git a/drivers/ide/ide-pio-blacklist.c b/drivers/ide/ide-pio-blacklist.c index a8c2c8f8660..40e683a84ff 100644 --- a/drivers/ide/ide-pio-blacklist.c +++ b/drivers/ide/ide-pio-blacklist.c @@ -7,6 +7,7 @@ */ #include <linux/string.h> +#include <linux/ide.h> static struct ide_pio_info { const char *name; diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 4b3bf6a06b7..8d1e32d7cd9 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -1,26 +1,26 @@ #include <linux/kernel.h> +#include <linux/gfp.h> #include <linux/ide.h> -#include <linux/hdreg.h> int generic_ide_suspend(struct device *dev, pm_message_t mesg) { - ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive); + ide_drive_t *drive = to_ide_device(dev); + ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - ide_task_t args; int ret; - /* call ACPI _GTM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) - ide_acpi_get_timing(hwif); + if (ide_port_acpi(hwif)) { + /* call ACPI _GTM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) + ide_acpi_get_timing(hwif); + } memset(&rqpm, 0, sizeof(rqpm)); - memset(&args, 0, sizeof(args)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_SUSPEND; - rq->special = &args; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_SUSPEND; if (mesg.event == PM_EVENT_PRETHAW) mesg.event = PM_EVENT_FREEZE; @@ -29,37 +29,39 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ret = blk_execute_rq(drive->queue, NULL, rq, 0); blk_put_request(rq); - /* call ACPI _PS3 only after both devices are suspended */ - if (ret == 0 && ((drive->dn & 1) || pair == NULL)) - ide_acpi_set_state(hwif, 0); + if (ret == 0 && ide_port_acpi(hwif)) { + /* call ACPI _PS3 only after both devices are suspended */ + if ((drive->dn & 1) || pair == NULL) + ide_acpi_set_state(hwif, 0); + } return ret; } int generic_ide_resume(struct device *dev) { - ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive); + ide_drive_t *drive = to_ide_device(dev); + ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - ide_task_t args; int err; - /* call ACPI _PS0 / _STM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) { - ide_acpi_set_state(hwif, 1); - ide_acpi_push_timing(hwif); - } + if (ide_port_acpi(hwif)) { + /* call ACPI _PS0 / _STM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) { + ide_acpi_set_state(hwif, 1); + ide_acpi_push_timing(hwif); + } - ide_acpi_exec_tfs(drive); + ide_acpi_exec_tfs(drive); + } memset(&rqpm, 0, sizeof(rqpm)); - memset(&args, 0, sizeof(args)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_RESUME; rq->cmd_flags |= REQ_PREEMPT; - rq->special = &args; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_RESUME; rqpm.pm_state = PM_EVENT_ON; @@ -78,7 +80,7 @@ int generic_ide_resume(struct device *dev) void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk(KERN_INFO "%s: complete_power_step(step: %d)\n", @@ -108,10 +110,8 @@ void ide_complete_power_step(ide_drive_t *drive, struct request *rq) ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; - ide_task_t *args = rq->special; - - memset(args, 0, sizeof(*args)); + struct request_pm_state *pm = rq->special; + struct ide_cmd cmd = { }; switch (pm->pm_step) { case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ @@ -124,12 +124,12 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id)) - args->tf.command = ATA_CMD_FLUSH_EXT; + cmd.tf.command = ATA_CMD_FLUSH_EXT; else - args->tf.command = ATA_CMD_FLUSH; + cmd.tf.command = ATA_CMD_FLUSH; goto out_do_tf; case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ - args->tf.command = ATA_CMD_STANDBYNOW1; + cmd.tf.command = ATA_CMD_STANDBYNOW1; goto out_do_tf; case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ ide_set_max_pio(drive); @@ -142,7 +142,7 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ - args->tf.command = ATA_CMD_IDLEIMMEDIATE; + cmd.tf.command = ATA_CMD_IDLEIMMEDIATE; goto out_do_tf; case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */ /* @@ -160,38 +160,44 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) } pm->pm_step = IDE_PM_COMPLETED; + return ide_stopped; out_do_tf: - args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - args->data_phase = TASKFILE_NO_DATA; - return do_rw_taskfile(drive, args); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.protocol = ATA_PROT_NODATA; + + return do_rw_taskfile(drive, &cmd); } /** - * ide_complete_pm_request - end the current Power Management request + * ide_complete_pm_rq - end the current Power Management request * @drive: target drive * @rq: request * * This function cleans up the current PM request and stops the queue * if necessary. */ -void ide_complete_pm_request(ide_drive_t *drive, struct request *rq) +void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) { struct request_queue *q = drive->queue; + struct request_pm_state *pm = rq->special; unsigned long flags; + ide_complete_power_step(drive, rq); + if (pm->pm_step != IDE_PM_COMPLETED) + return; + #ifdef DEBUG_PM printk("%s: completing PM request, %s\n", drive->name, - blk_pm_suspend_request(rq) ? "suspend" : "resume"); + (rq->cmd_type == REQ_TYPE_PM_SUSPEND) ? "suspend" : "resume"); #endif spin_lock_irqsave(q->queue_lock, flags); - if (blk_pm_suspend_request(rq)) { + if (rq->cmd_type == REQ_TYPE_PM_SUSPEND) blk_stop_queue(q); - } else { + else drive->dev_flags &= ~IDE_DFLAG_BLOCKED; - blk_start_queue(q); - } spin_unlock_irqrestore(q->queue_lock, flags); drive->hwif->rq = NULL; @@ -202,13 +208,13 @@ void ide_complete_pm_request(ide_drive_t *drive, struct request *rq) void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; - if (blk_pm_suspend_request(rq) && + if (rq->cmd_type == REQ_TYPE_PM_SUSPEND && pm->pm_step == IDE_PM_START_SUSPEND) /* Mark drive blocked when starting the suspend sequence. */ drive->dev_flags |= IDE_DFLAG_BLOCKED; - else if (blk_pm_resume_request(rq) && + else if (rq->cmd_type == REQ_TYPE_PM_RESUME && pm->pm_step == IDE_PM_START_RESUME) { /* * The first thing we do on wakeup is to wait for BSY bit to @@ -219,6 +225,9 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq) * point. */ ide_hwif_t *hwif = drive->hwif; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + struct request_queue *q = drive->queue; + unsigned long flags; int rc; #ifdef DEBUG_PM printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name); @@ -226,10 +235,14 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq) rc = ide_wait_not_busy(hwif, 35000); if (rc) printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); - SELECT_DRIVE(drive); - hwif->tp_ops->set_irq(hwif, 1); + tp_ops->dev_select(drive); + tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); rc = ide_wait_not_busy(hwif, 100000); if (rc) printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); + + spin_lock_irqsave(q->queue_lock, flags); + blk_start_queue(q); + spin_unlock_irqrestore(q->queue_lock, flags); } } diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index bac9b392b68..e5f3db83137 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/pnp.h> #include <linux/ide.h> +#include <linux/module.h> #define DRV_NAME "ide-pnp" @@ -27,12 +28,17 @@ static struct pnp_device_id idepnp_devices[] = { {.id = ""} }; +static const struct ide_port_info ide_pnp_port_info = { + .host_flags = IDE_HFLAG_NO_DMA, + .chipset = ide_generic, +}; + static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { struct ide_host *host; unsigned long base, ctl; int rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n"); @@ -58,9 +64,8 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base, ctl); hw.irq = pnp_irq(dev, 0); - hw.chipset = ide_generic; - rc = ide_host_add(NULL, hws, &host); + rc = ide_host_add(&ide_pnp_port_info, hws, 1, &host); if (rc) goto out; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 0ccbb4459fb..a3d3b1733c4 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -97,7 +97,7 @@ static void ide_disk_init_mult_count(ide_drive_t *drive) drive->mult_req = id[ATA_ID_MULTSECT] & 0xff; if (drive->mult_req) - drive->special.b.set_multmode = 1; + drive->special_flags |= IDE_SFLAG_SET_MULTMODE; } } @@ -181,16 +181,16 @@ static void ide_classify_atapi_dev(ide_drive_t *drive) * do_identify - identify a drive * @drive: drive to identify * @cmd: command used + * @id: buffer for IDENTIFY data * * Called when we have issued a drive identify command to * read and parse the results. This function is run with * interrupts disabled. */ -static void do_identify(ide_drive_t *drive, u8 cmd) +static void do_identify(ide_drive_t *drive, u8 cmd, u16 *id) { ide_hwif_t *hwif = drive->hwif; - u16 *id = drive->id; char *m = (char *)&id[ATA_ID_PROD]; unsigned long flags; int bswap = 1; @@ -228,43 +228,26 @@ static void do_identify(ide_drive_t *drive, u8 cmd) m[ATA_ID_PROD_LEN - 1] = '\0'; if (strstr(m, "E X A B Y T E N E S T")) - goto err_misc; - - drive->dev_flags |= IDE_DFLAG_PRESENT; - drive->dev_flags &= ~IDE_DFLAG_DEAD; - - /* - * Check for an ATAPI device - */ - if (cmd == ATA_CMD_ID_ATAPI) - ide_classify_atapi_dev(drive); + drive->dev_flags &= ~IDE_DFLAG_PRESENT; else - /* - * Not an ATAPI device: looks like a "regular" hard disk - */ - ide_classify_ata_dev(drive); - return; -err_misc: - kfree(id); - drive->dev_flags &= ~IDE_DFLAG_PRESENT; + drive->dev_flags |= IDE_DFLAG_PRESENT; } /** - * actual_try_to_identify - send ata/atapi identify + * ide_dev_read_id - send ATA/ATAPI IDENTIFY command * @drive: drive to identify * @cmd: command to use + * @id: buffer for IDENTIFY data + * @irq_ctx: flag set when called from the IRQ context * - * try_to_identify() sends an ATA(PI) IDENTIFY request to a drive - * and waits for a response. It also monitors irqs while this is - * happening, in hope of automatically determining which one is - * being used by the interface. + * Sends an ATA(PI) IDENTIFY request to a drive and waits for a response. * * Returns: 0 device was identified * 1 device timed-out (no response to identify request) * 2 device aborted the command (refused to identify itself) */ -static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) +int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id, int irq_ctx) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; @@ -273,8 +256,18 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) unsigned long timeout; u8 s = 0, a = 0; + /* + * Disable device IRQ. Otherwise we'll get spurious interrupts + * during the identify phase that the IRQ handler isn't expecting. + */ + if (io_ports->ctl_addr) + tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS); + /* take a deep breath */ - msleep(50); + if (irq_ctx) + mdelay(50); + else + msleep(50); if (io_ports->ctl_addr && (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) { @@ -294,13 +287,11 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) * identify command to be sure of reply */ if (cmd == ATA_CMD_ID_ATAPI) { - ide_task_t task; + struct ide_taskfile tf; - memset(&task, 0, sizeof(task)); + memset(&tf, 0, sizeof(tf)); /* disable DMA & overlap */ - task.tf_flags = IDE_TFLAG_OUT_FEATURE; - - tp_ops->tf_load(drive, &task); + tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE); } /* ask drive for ID */ @@ -308,16 +299,23 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - if (ide_busy_sleep(hwif, timeout, use_altstatus)) - return 1; - /* wait for IRQ and ATA_DRQ */ - msleep(50); - s = tp_ops->read_status(hwif); + if (irq_ctx) { + rc = __ide_wait_stat(drive, ATA_DRQ, BAD_R_STAT, timeout, &s); + if (rc) + return 1; + } else { + rc = ide_busy_sleep(drive, timeout, use_altstatus); + if (rc) + return 1; + + msleep(50); + s = tp_ops->read_status(hwif); + } if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) { /* drive returned ID */ - do_identify(drive, cmd); + do_identify(drive, cmd, id); /* drive responded with ID */ rc = 0; /* clear drive IRQ */ @@ -329,65 +327,9 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) return rc; } -/** - * try_to_identify - try to identify a drive - * @drive: drive to probe - * @cmd: command to use - * - * Issue the identify command and then do IRQ probing to - * complete the identification when needed by finding the - * IRQ the drive is attached to - */ - -static int try_to_identify (ide_drive_t *drive, u8 cmd) +int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus) { ide_hwif_t *hwif = drive->hwif; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - int retval; - int autoprobe = 0; - unsigned long cookie = 0; - - /* - * Disable device irq unless we need to - * probe for it. Otherwise we'll get spurious - * interrupts during the identify-phase that - * the irq handler isn't expecting. - */ - if (hwif->io_ports.ctl_addr) { - if (!hwif->irq) { - autoprobe = 1; - cookie = probe_irq_on(); - } - tp_ops->set_irq(hwif, autoprobe); - } - - retval = actual_try_to_identify(drive, cmd); - - if (autoprobe) { - int irq; - - tp_ops->set_irq(hwif, 0); - /* clear drive IRQ */ - (void)tp_ops->read_status(hwif); - udelay(5); - irq = probe_irq_off(cookie); - if (!hwif->irq) { - if (irq > 0) { - hwif->irq = irq; - } else { - /* Mmmm.. multiple IRQs.. - * don't know which was ours - */ - printk(KERN_ERR "%s: IRQ probe failed (0x%lx)\n", - drive->name, cookie); - } - } - } - return retval; -} - -int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) -{ u8 stat; timeout += jiffies; @@ -400,19 +342,18 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) return 0; } while (time_before(jiffies, timeout)); + printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__); + return 1; /* drive timed-out */ } static u8 ide_read_device(ide_drive_t *drive) { - ide_task_t task; - - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_IN_DEVICE; + struct ide_taskfile tf; - drive->hwif->tp_ops->tf_read(drive, &task); + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_DEVICE); - return task.tf.device; + return tf.device; } /** @@ -440,6 +381,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; + u16 *id = drive->id; int rc; u8 present = !!(drive->dev_flags & IDE_DFLAG_PRESENT), stat; @@ -457,13 +399,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd) * (e.g. crw9624 as drive0 with disk as slave) */ msleep(50); - SELECT_DRIVE(drive); + tp_ops->dev_select(drive); msleep(50); if (ide_read_device(drive) != drive->select && present == 0) { if (drive->dn & 1) { /* exit with drive0 selected */ - SELECT_DRIVE(hwif->devices[0]); + tp_ops->dev_select(hwif->devices[0]); /* allow ATA_BUSY to assert & clear */ msleep(50); } @@ -475,11 +417,10 @@ static int do_probe (ide_drive_t *drive, u8 cmd) if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) || present || cmd == ATA_CMD_ID_ATAPI) { - /* send cmd and wait */ - if ((rc = try_to_identify(drive, cmd))) { + rc = ide_dev_read_id(drive, cmd, id, 0); + if (rc) /* failed: try again */ - rc = try_to_identify(drive,cmd); - } + rc = ide_dev_read_id(drive, cmd, id, 0); stat = tp_ops->read_status(hwif); @@ -490,11 +431,11 @@ static int do_probe (ide_drive_t *drive, u8 cmd) printk(KERN_ERR "%s: no response (status = 0x%02x), " "resetting drive\n", drive->name, stat); msleep(50); - SELECT_DRIVE(drive); + tp_ops->dev_select(drive); msleep(50); tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); - (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0); - rc = try_to_identify(drive, cmd); + (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0); + rc = ide_dev_read_id(drive, cmd, id, 0); } /* ensure drive IRQ is clear */ @@ -509,7 +450,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) } if (drive->dn & 1) { /* exit with drive0 selected */ - SELECT_DRIVE(hwif->devices[0]); + tp_ops->dev_select(hwif->devices[0]); msleep(50); /* ensure drive irq is clear */ (void)tp_ops->read_status(hwif); @@ -517,37 +458,6 @@ static int do_probe (ide_drive_t *drive, u8 cmd) return rc; } -/* - * - */ -static void enable_nest (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - u8 stat; - - printk(KERN_INFO "%s: enabling %s -- ", - hwif->name, (char *)&drive->id[ATA_ID_PROD]); - - SELECT_DRIVE(drive); - msleep(50); - tp_ops->exec_command(hwif, ATA_EXABYTE_ENABLE_NEST); - - if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 0)) { - printk(KERN_CONT "failed (timeout)\n"); - return; - } - - msleep(50); - - stat = tp_ops->read_status(hwif); - - if (!OK_STAT(stat, 0, BAD_STAT)) - printk(KERN_CONT "failed (status = 0x%02x)\n", stat); - else - printk(KERN_CONT "success\n"); -} - /** * probe_for_drives - upper level drive probe * @drive: drive to probe for @@ -563,44 +473,28 @@ static void enable_nest (ide_drive_t *drive) static u8 probe_for_drive(ide_drive_t *drive) { char *m; + int rc; + u8 cmd; - /* - * In order to keep things simple we have an id - * block for all drives at all times. If the device - * is pre ATA or refuses ATA/ATAPI identify we - * will add faked data to this. - * - * Also note that 0 everywhere means "can't do X" - */ - drive->dev_flags &= ~IDE_DFLAG_ID_READ; - drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL); - if (drive->id == NULL) { - printk(KERN_ERR "ide: out of memory for id data.\n"); - return 0; - } - m = (char *)&drive->id[ATA_ID_PROD]; strcpy(m, "UNKNOWN"); /* skip probing? */ if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0) { -retry: /* if !(success||timed-out) */ - if (do_probe(drive, ATA_CMD_ID_ATA) >= 2) + cmd = ATA_CMD_ID_ATA; + rc = do_probe(drive, cmd); + if (rc >= 2) { /* look for ATAPI device */ - (void)do_probe(drive, ATA_CMD_ID_ATAPI); + cmd = ATA_CMD_ID_ATAPI; + rc = do_probe(drive, cmd); + } if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - /* drive not found */ return 0; - if (strstr(m, "E X A B Y T E N E S T")) { - enable_nest(drive); - goto retry; - } - /* identification failed? */ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) { if (drive->media == ide_disk) { @@ -614,8 +508,12 @@ retry: printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name); drive->dev_flags &= ~IDE_DFLAG_PRESENT; } + } else { + if (cmd == ATA_CMD_ID_ATAPI) + ide_classify_atapi_dev(drive); + else + ide_classify_ata_dev(drive); } - /* drive was found */ } if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) @@ -632,7 +530,7 @@ retry: ide_disk_init_mult_count(drive); } - return !!(drive->dev_flags & IDE_DFLAG_PRESENT); + return 1; } static void hwif_release_dev(struct device *dev) @@ -647,9 +545,10 @@ static int ide_register_port(ide_hwif_t *hwif) int ret; /* register with global device tree */ - dev_set_name(&hwif->gendev, hwif->name); - hwif->gendev.driver_data = hwif; - hwif->gendev.parent = hwif->dev; + dev_set_name(&hwif->gendev, "%s", hwif->name); + dev_set_drvdata(&hwif->gendev, hwif); + if (hwif->gendev.parent == NULL) + hwif->gendev.parent = hwif->dev; hwif->gendev.release = hwif_release_dev; ret = device_register(&hwif->gendev); @@ -660,7 +559,7 @@ static int ide_register_port(ide_hwif_t *hwif) } hwif->portdev = device_create(ide_port_class, &hwif->gendev, - MKDEV(0, 0), hwif, hwif->name); + MKDEV(0, 0), hwif, "%s", hwif->name); if (IS_ERR(hwif->portdev)) { ret = PTR_ERR(hwif->portdev); device_unregister(&hwif->gendev); @@ -697,6 +596,7 @@ out: static int ide_port_wait_ready(ide_hwif_t *hwif) { + const struct ide_tp_ops *tp_ops = hwif->tp_ops; ide_drive_t *drive; int i, rc; @@ -719,8 +619,8 @@ static int ide_port_wait_ready(ide_hwif_t *hwif) /* Ignore disks that we will not probe for later. */ if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0 || (drive->dev_flags & IDE_DFLAG_PRESENT)) { - SELECT_DRIVE(drive); - hwif->tp_ops->set_irq(hwif, 1); + tp_ops->dev_select(drive); + tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); mdelay(2); rc = ide_wait_not_busy(hwif, 35000); if (rc) @@ -732,7 +632,7 @@ static int ide_port_wait_ready(ide_hwif_t *hwif) out: /* Exit function with master reselected (let's be sane) */ if (i) - SELECT_DRIVE(hwif->devices[0]); + tp_ops->dev_select(hwif->devices[0]); return rc; } @@ -778,7 +678,6 @@ EXPORT_SYMBOL_GPL(ide_undecoded_slave); static int ide_probe_port(ide_hwif_t *hwif) { ide_drive_t *drive; - unsigned long flags; unsigned int irqd; int i, rc = -ENODEV; @@ -796,9 +695,6 @@ static int ide_probe_port(ide_hwif_t *hwif) if (irqd) disable_irq(hwif->irq); - local_irq_save(flags); - local_irq_enable_in_hardirq(); - if (ide_port_wait_ready(hwif) == -EBUSY) printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name); @@ -812,8 +708,6 @@ static int ide_probe_port(ide_hwif_t *hwif) rc = 0; } - local_irq_restore(flags); - /* * Use cached IRQ number. It might be (and is...) changed by probe * code above @@ -830,29 +724,20 @@ static void ide_port_tune_devices(ide_hwif_t *hwif) ide_drive_t *drive; int i; - ide_port_for_each_dev(i, drive, hwif) { - if (drive->dev_flags & IDE_DFLAG_PRESENT) { - if (port_ops && port_ops->quirkproc) - port_ops->quirkproc(drive); - } + ide_port_for_each_present_dev(i, drive, hwif) { + ide_check_nien_quirk_list(drive); + + if (port_ops && port_ops->quirkproc) + port_ops->quirkproc(drive); } - ide_port_for_each_dev(i, drive, hwif) { - if (drive->dev_flags & IDE_DFLAG_PRESENT) { - ide_set_max_pio(drive); + ide_port_for_each_present_dev(i, drive, hwif) { + ide_set_max_pio(drive); - drive->dev_flags |= IDE_DFLAG_NICE1; + drive->dev_flags |= IDE_DFLAG_NICE1; - if (hwif->dma_ops) - ide_set_dma(drive); - } - } - - ide_port_for_each_dev(i, drive, hwif) { - if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) - drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT; - else - drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT; + if (hwif->dma_ops) + ide_set_dma(drive); } } @@ -883,7 +768,7 @@ static int ide_init_queue(ide_drive_t *drive) if (hwif->rqsize < max_sectors) max_sectors = hwif->rqsize; - blk_queue_max_sectors(q, max_sectors); + blk_queue_max_hw_sectors(q, max_sectors); #ifdef CONFIG_PCI /* When we have an IOMMU, we may have a problem where pci_map_sg() @@ -899,8 +784,7 @@ static int ide_init_queue(ide_drive_t *drive) max_sg_entries >>= 1; #endif /* CONFIG_PCI */ - blk_queue_max_hw_segments(q, max_sg_entries); - blk_queue_max_phys_segments(q, max_sg_entries); + blk_queue_max_segments(q, max_sg_entries); /* assign drive queue */ drive->queue = q; @@ -923,15 +807,10 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) int i, j = 0; mutex_lock(&ide_cfg_mtx); - ide_port_for_each_dev(i, drive, hwif) { - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - continue; - + ide_port_for_each_present_dev(i, drive, hwif) { if (ide_init_queue(drive)) { printk(KERN_ERR "ide: failed to init %s\n", drive->name); - kfree(drive->id); - drive->id = NULL; drive->dev_flags &= ~IDE_DFLAG_PRESENT; continue; } @@ -943,41 +822,40 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) return j; } +static void ide_host_enable_irqs(struct ide_host *host) +{ + ide_hwif_t *hwif; + int i; + + ide_host_for_each_port(i, hwif, host) { + if (hwif == NULL) + continue; + + /* clear any pending IRQs */ + hwif->tp_ops->read_status(hwif); + + /* unmask IRQs */ + if (hwif->io_ports.ctl_addr) + hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); + } +} + /* * This routine sets up the IRQ for an IDE interface. */ static int init_irq (ide_hwif_t *hwif) { struct ide_io_ports *io_ports = &hwif->io_ports; - int sa = 0; + struct ide_host *host = hwif->host; + irq_handler_t irq_handler = host->irq_handler; + int sa = host->irq_flags; - mutex_lock(&ide_cfg_mtx); - spin_lock_init(&hwif->lock); + if (irq_handler == NULL) + irq_handler = ide_intr; - init_timer(&hwif->timer); - hwif->timer.function = &ide_timer_expiry; - hwif->timer.data = (unsigned long)hwif; - -#if defined(__mc68000__) - sa = IRQF_SHARED; -#endif /* __mc68000__ */ - - if (hwif->chipset == ide_pci) - sa = IRQF_SHARED; - - if (io_ports->ctl_addr) - hwif->tp_ops->set_irq(hwif, 1); - - if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif)) - goto out_up; - - if (!hwif->rqsize) { - if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) || - (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA)) - hwif->rqsize = 256; - else - hwif->rqsize = 65536; - } + if (!host->get_lock) + if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) + goto out_up; #if !defined(__mc68000__) printk(KERN_INFO "%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name, @@ -991,10 +869,8 @@ static int init_irq (ide_hwif_t *hwif) printk(KERN_CONT " (serialized)"); printk(KERN_CONT "\n"); - mutex_unlock(&ide_cfg_mtx); return 0; out_up: - mutex_unlock(&ide_cfg_mtx); return 1; } @@ -1073,34 +949,22 @@ EXPORT_SYMBOL_GPL(ide_init_disk); static void drive_release_dev (struct device *dev) { ide_drive_t *drive = container_of(dev, ide_drive_t, gendev); - ide_hwif_t *hwif = drive->hwif; ide_proc_unregister_device(drive); - spin_lock_irq(&hwif->lock); - kfree(drive->id); - drive->id = NULL; - drive->dev_flags &= ~IDE_DFLAG_PRESENT; - /* Messed up locking ... */ - spin_unlock_irq(&hwif->lock); blk_cleanup_queue(drive->queue); - spin_lock_irq(&hwif->lock); drive->queue = NULL; - spin_unlock_irq(&hwif->lock); + + drive->dev_flags &= ~IDE_DFLAG_PRESENT; complete(&drive->gendev_rel_comp); } static int hwif_init(ide_hwif_t *hwif) { - int old_irq; - if (!hwif->irq) { - hwif->irq = __ide_default_irq(hwif->io_ports.data_addr); - if (!hwif->irq) { - printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name); - return 0; - } + printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name); + return 0; } if (register_blkdev(hwif->major, hwif->name)) @@ -1118,29 +982,12 @@ static int hwif_init(ide_hwif_t *hwif) sg_init_table(hwif->sg_table, hwif->sg_max_nents); - if (init_irq(hwif) == 0) - goto done; - - old_irq = hwif->irq; - /* - * It failed to initialise. Find the default IRQ for - * this port and try that. - */ - hwif->irq = __ide_default_irq(hwif->io_ports.data_addr); - if (!hwif->irq) { - printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n", - hwif->name, old_irq); - goto out; - } if (init_irq(hwif)) { - printk(KERN_ERR "%s: probed IRQ %d and default IRQ %d failed\n", - hwif->name, old_irq, hwif->irq); + printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n", + hwif->name, hwif->irq); goto out; } - printk(KERN_WARNING "%s: probed IRQ %d failed, using default\n", - hwif->name, hwif->irq); -done: blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, THIS_MODULE, ata_probe, ata_lock, hwif); return 1; @@ -1155,17 +1002,14 @@ static void hwif_register_devices(ide_hwif_t *hwif) ide_drive_t *drive; unsigned int i; - ide_port_for_each_dev(i, drive, hwif) { + ide_port_for_each_present_dev(i, drive, hwif) { struct device *dev = &drive->gendev; int ret; - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - continue; - dev_set_name(dev, "%u.%u", hwif->index, i); + dev_set_drvdata(dev, drive); dev->parent = &hwif->gendev; dev->bus = &ide_bus_type; - dev->driver_data = drive; dev->release = drive_release_dev; ret = device_register(dev); @@ -1186,11 +1030,15 @@ static void ide_port_init_devices(ide_hwif_t *hwif) if (hwif->host_flags & IDE_HFLAG_IO_32BIT) drive->io_32bit = 1; + if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) + drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT; if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS) drive->dev_flags |= IDE_DFLAG_UNMASK; if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) drive->dev_flags |= IDE_DFLAG_NO_UNMASK; + drive->pio_mode = XFER_PIO_0; + if (port_ops && port_ops->init_dev) port_ops->init_dev(drive); } @@ -1201,16 +1049,11 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, { hwif->channel = port; - if (d->chipset) - hwif->chipset = d->chipset; + hwif->chipset = d->chipset ? d->chipset : ide_pci; if (d->init_iops) d->init_iops(hwif); - if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || - (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) - hwif->irq = port ? 15 : 14; - /* ->host_flags may be set by ->init_iops (or even earlier...) */ hwif->host_flags |= d->host_flags; hwif->pio_mask = d->pio_mask; @@ -1219,7 +1062,7 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, hwif->tp_ops = d->tp_ops; /* ->set_pio_mode for DTC2278 is currently limited to port 0 */ - if (hwif->chipset != ide_dtc2278 || hwif->channel == 0) + if ((hwif->host_flags & IDE_HFLAG_DTC2278) == 0 || hwif->channel == 0) hwif->port_ops = d->port_ops; hwif->swdma_mask = d->swdma_mask; @@ -1253,6 +1096,13 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, if (d->max_sectors) hwif->rqsize = d->max_sectors; + else { + if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) || + (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA)) + hwif->rqsize = 256; + else + hwif->rqsize = 65536; + } /* call chipset specific routine for each enabled port */ if (d->init_hwif) @@ -1280,16 +1130,19 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) ide_port_for_each_dev(i, drive, hwif) { u8 j = (hwif->index * MAX_DRIVES) + i; + u16 *saved_id = drive->id; memset(drive, 0, sizeof(*drive)); + memset(saved_id, 0, SECTOR_SIZE); + drive->id = saved_id; drive->media = ide_disk; drive->select = (i << 4) | ATA_DEVICE_OBS; drive->hwif = hwif; drive->ready_stat = ATA_DRDY; drive->bad_wstat = BAD_W_STAT; - drive->special.b.recalibrate = 1; - drive->special.b.set_geometry = 1; + drive->special_flags = IDE_SFLAG_RECALIBRATE | + IDE_SFLAG_SET_GEOMETRY; drive->name[0] = 'h'; drive->name[1] = 'd'; drive->name[2] = 'a' + j; @@ -1311,6 +1164,12 @@ static void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) hwif->name[2] = 'e'; hwif->name[3] = '0' + index; + spin_lock_init(&hwif->lock); + + init_timer(&hwif->timer); + hwif->timer.function = &ide_timer_expiry; + hwif->timer.data = (unsigned long)hwif; + init_completion(&hwif->gendev_rel_comp); hwif->tp_ops = &default_tp_ops; @@ -1318,14 +1177,12 @@ static void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) ide_port_init_devices_data(hwif); } -static void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) +static void ide_init_port_hw(ide_hwif_t *hwif, struct ide_hw *hw) { memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; - hwif->chipset = hw->chipset; hwif->dev = hw->dev; hwif->gendev.parent = hw->parent ? hw->parent : hw->dev; - hwif->ack_intr = hw->ack_intr; hwif->config_data = hw->config; } @@ -1342,7 +1199,7 @@ static int ide_find_port_slot(const struct ide_port_info *d) { int idx = -ENOENT; u8 bootable = (d && (d->host_flags & IDE_HFLAG_NON_BOOTABLE)) ? 0 : 1; - u8 i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0;; + u8 i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0; /* * Claim an unassigned slot. @@ -1383,8 +1240,10 @@ static void ide_port_free_devices(ide_hwif_t *hwif) ide_drive_t *drive; int i; - ide_port_for_each_dev(i, drive, hwif) + ide_port_for_each_dev(i, drive, hwif) { + kfree(drive->id); kfree(drive); + } } static int ide_port_alloc_devices(ide_hwif_t *hwif, int node) @@ -1398,6 +1257,18 @@ static int ide_port_alloc_devices(ide_hwif_t *hwif, int node) if (drive == NULL) goto out_nomem; + /* + * In order to keep things simple we have an id + * block for all drives at all times. If the device + * is pre ATA or refuses ATA/ATAPI identify we + * will add faked data to this. + * + * Also note that 0 everywhere means "can't do X" + */ + drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node); + if (drive->id == NULL) + goto out_nomem; + hwif->devices[i] = drive; } return 0; @@ -1407,7 +1278,8 @@ out_nomem: return -ENOMEM; } -struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) +struct ide_host *ide_host_alloc(const struct ide_port_info *d, + struct ide_hw **hws, unsigned int n_ports) { struct ide_host *host; struct device *dev = hws[0] ? hws[0]->dev : NULL; @@ -1418,7 +1290,7 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) if (host == NULL) return NULL; - for (i = 0; i < MAX_HOST_PORTS; i++) { + for (i = 0; i < n_ports; i++) { ide_hwif_t *hwif; int idx; @@ -1438,6 +1310,7 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) if (idx < 0) { printk(KERN_ERR "%s: no free slot for interface\n", d ? d->name : "ide"); + ide_port_free_devices(hwif); kfree(hwif); continue; } @@ -1459,15 +1332,42 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) if (d) { host->init_chipset = d->init_chipset; + host->get_lock = d->get_lock; + host->release_lock = d->release_lock; host->host_flags = d->host_flags; + host->irq_flags = d->irq_flags; } return host; } EXPORT_SYMBOL_GPL(ide_host_alloc); +static void ide_port_free(ide_hwif_t *hwif) +{ + ide_port_free_devices(hwif); + ide_free_port_slot(hwif->index); + kfree(hwif); +} + +static void ide_disable_port(ide_hwif_t *hwif) +{ + struct ide_host *host = hwif->host; + int i; + + printk(KERN_INFO "%s: disabling port\n", hwif->name); + + for (i = 0; i < MAX_HOST_PORTS; i++) { + if (host->ports[i] == hwif) { + host->ports[i] = NULL; + host->n_ports--; + } + } + + ide_port_free(hwif); +} + int ide_host_register(struct ide_host *host, const struct ide_port_info *d, - hw_regs_t **hws) + struct ide_hw **hws) { ide_hwif_t *hwif, *mate = NULL; int i, j = 0; @@ -1481,19 +1381,17 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, ide_init_port_hw(hwif, hws[i]); ide_port_apply_params(hwif); - if (d == NULL) { - mate = NULL; - } else { - if ((i & 1) && mate) { - hwif->mate = mate; - mate->mate = hwif; - } + if ((i & 1) && mate) { + hwif->mate = mate; + mate->mate = hwif; + } - mate = (i & 1) ? NULL : hwif; + mate = (i & 1) ? NULL : hwif; - ide_init_port(hwif, i & 1, d); - ide_port_cable_detect(hwif); - } + ide_init_port(hwif, i & 1, d); + ide_port_cable_detect(hwif); + + hwif->port_flags |= IDE_PFLAG_PROBING; ide_port_init_devices(hwif); } @@ -1505,14 +1403,22 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, if (ide_probe_port(hwif) == 0) hwif->present = 1; - if (hwif->chipset != ide_4drives || !hwif->mate || - !hwif->mate->present) - ide_register_port(hwif); + hwif->port_flags &= ~IDE_PFLAG_PROBING; + + if ((hwif->host_flags & IDE_HFLAG_4DRIVES) == 0 || + hwif->mate == NULL || hwif->mate->present == 0) { + if (ide_register_port(hwif)) { + ide_disable_port(hwif); + continue; + } + } if (hwif->present) ide_port_tune_devices(hwif); } + ide_host_enable_irqs(host); + ide_host_for_each_port(i, hwif, host) { if (hwif == NULL) continue; @@ -1520,7 +1426,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, if (hwif_init(hwif) == 0) { printk(KERN_INFO "%s: failed to initialize IDE " "interface\n", hwif->name); - hwif->present = 0; + device_unregister(&hwif->gendev); + ide_disable_port(hwif); continue; } @@ -1532,7 +1439,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, j++; - ide_acpi_init(hwif); + ide_acpi_init_port(hwif); if (hwif->present) ide_acpi_port_init_devices(hwif); @@ -1542,32 +1449,26 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, if (hwif == NULL) continue; - if (hwif->present) - hwif_register_devices(hwif); - } - - ide_host_for_each_port(i, hwif, host) { - if (hwif == NULL) - continue; - ide_sysfs_register_port(hwif); ide_proc_register_port(hwif); - if (hwif->present) + if (hwif->present) { ide_proc_port_register_devices(hwif); + hwif_register_devices(hwif); + } } return j ? 0 : -1; } EXPORT_SYMBOL_GPL(ide_host_register); -int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws, - struct ide_host **hostp) +int ide_host_add(const struct ide_port_info *d, struct ide_hw **hws, + unsigned int n_ports, struct ide_host **hostp) { struct ide_host *host; int rc; - host = ide_host_alloc(d, hws); + host = ide_host_alloc(d, hws, n_ports); if (host == NULL) return -ENOMEM; @@ -1589,11 +1490,9 @@ static void __ide_port_unregister_devices(ide_hwif_t *hwif) ide_drive_t *drive; int i; - ide_port_for_each_dev(i, drive, hwif) { - if (drive->dev_flags & IDE_DFLAG_PRESENT) { - device_unregister(&drive->gendev); - wait_for_completion(&drive->gendev_rel_comp); - } + ide_port_for_each_present_dev(i, drive, hwif) { + device_unregister(&drive->gendev); + wait_for_completion(&drive->gendev_rel_comp); } } @@ -1635,7 +1534,8 @@ static void ide_unregister(ide_hwif_t *hwif) ide_proc_unregister_port(hwif); - free_irq(hwif->irq, hwif); + if (!hwif->host->get_lock) + free_irq(hwif->irq, hwif); device_unregister(hwif->portdev); device_unregister(&hwif->gendev); @@ -1659,12 +1559,8 @@ void ide_host_free(struct ide_host *host) int i; ide_host_for_each_port(i, hwif, host) { - if (hwif == NULL) - continue; - - ide_port_free_devices(hwif); - ide_free_port_slot(hwif->index); - kfree(hwif); + if (hwif) + ide_port_free(hwif); } kfree(host); @@ -1687,11 +1583,20 @@ EXPORT_SYMBOL_GPL(ide_host_remove); void ide_port_scan(ide_hwif_t *hwif) { + int rc; + ide_port_apply_params(hwif); ide_port_cable_detect(hwif); + + hwif->port_flags |= IDE_PFLAG_PROBING; + ide_port_init_devices(hwif); - if (ide_probe_port(hwif) < 0) + rc = ide_probe_port(hwif); + + hwif->port_flags &= ~IDE_PFLAG_PROBING; + + if (rc < 0) return; hwif->present = 1; diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 1d8978b3314..97c07007777 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -25,16 +25,15 @@ #include <linux/ctype.h> #include <linux/ide.h> #include <linux/seq_file.h> +#include <linux/slab.h> #include <asm/io.h> static struct proc_dir_entry *proc_ide_root; -static int proc_ide_read_imodel - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_imodel_proc_show(struct seq_file *m, void *v) { - ide_hwif_t *hwif = (ide_hwif_t *) data; - int len; + ide_hwif_t *hwif = (ide_hwif_t *) m->private; const char *name; switch (hwif->chipset) { @@ -53,63 +52,108 @@ static int proc_ide_read_imodel case ide_acorn: name = "acorn"; break; default: name = "(unknown)"; break; } - len = sprintf(page, "%s\n", name); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%s\n", name); + return 0; +} + +static int ide_imodel_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_imodel_proc_show, PDE_DATA(inode)); } -static int proc_ide_read_mate - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations ide_imodel_proc_fops = { + .owner = THIS_MODULE, + .open = ide_imodel_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int ide_mate_proc_show(struct seq_file *m, void *v) { - ide_hwif_t *hwif = (ide_hwif_t *) data; - int len; + ide_hwif_t *hwif = (ide_hwif_t *) m->private; if (hwif && hwif->mate) - len = sprintf(page, "%s\n", hwif->mate->name); + seq_printf(m, "%s\n", hwif->mate->name); else - len = sprintf(page, "(none)\n"); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "(none)\n"); + return 0; } -static int proc_ide_read_channel - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_mate_proc_open(struct inode *inode, struct file *file) { - ide_hwif_t *hwif = (ide_hwif_t *) data; - int len; + return single_open(file, ide_mate_proc_show, PDE_DATA(inode)); +} - page[0] = hwif->channel ? '1' : '0'; - page[1] = '\n'; - len = 2; - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +static const struct file_operations ide_mate_proc_fops = { + .owner = THIS_MODULE, + .open = ide_mate_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int ide_channel_proc_show(struct seq_file *m, void *v) +{ + ide_hwif_t *hwif = (ide_hwif_t *) m->private; + + seq_printf(m, "%c\n", hwif->channel ? '1' : '0'); + return 0; } -static int proc_ide_read_identify - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_channel_proc_open(struct inode *inode, struct file *file) { - ide_drive_t *drive = (ide_drive_t *)data; - int len = 0, i = 0; - int err = 0; + return single_open(file, ide_channel_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations ide_channel_proc_fops = { + .owner = THIS_MODULE, + .open = ide_channel_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; - len = sprintf(page, "\n"); +static int ide_identify_proc_show(struct seq_file *m, void *v) +{ + ide_drive_t *drive = (ide_drive_t *)m->private; + u8 *buf; - if (drive) { - __le16 *val = (__le16 *)page; + if (!drive) { + seq_putc(m, '\n'); + return 0; + } - err = taskfile_lib_get_identify(drive, page); - if (!err) { - char *out = (char *)page + SECTOR_SIZE; + buf = kmalloc(SECTOR_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + if (taskfile_lib_get_identify(drive, buf) == 0) { + __le16 *val = (__le16 *)buf; + int i; - page = out; - do { - out += sprintf(out, "%04x%c", - le16_to_cpup(val), (++i & 7) ? ' ' : '\n'); - val += 1; - } while (i < SECTOR_SIZE / 2); - len = out - page; + for (i = 0; i < SECTOR_SIZE / 2; i++) { + seq_printf(m, "%04x%c", le16_to_cpu(val[i]), + (i % 8) == 7 ? '\n' : ' '); } - } - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + } else + seq_putc(m, buf[0]); + kfree(buf); + return 0; +} + +static int ide_identify_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_identify_proc_show, PDE_DATA(inode)); } +static const struct file_operations ide_identify_proc_fops = { + .owner = THIS_MODULE, + .open = ide_identify_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /** * ide_find_setting - find a specific setting * @st: setting table pointer @@ -194,26 +238,20 @@ ide_devset_get(xfer_rate, current_speed); static int set_xfer_rate (ide_drive_t *drive, int arg) { - ide_task_t task; - int err; + struct ide_cmd cmd; if (arg < XFER_PIO_0 || arg > XFER_UDMA_6) return -EINVAL; - memset(&task, 0, sizeof(task)); - task.tf.command = ATA_CMD_SET_FEATURES; - task.tf.feature = SETFEATURES_XFER; - task.tf.nsect = (u8)arg; - task.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_IN_NSECT; + memset(&cmd, 0, sizeof(cmd)); + cmd.tf.command = ATA_CMD_SET_FEATURES; + cmd.tf.feature = SETFEATURES_XFER; + cmd.tf.nsect = (u8)arg; + cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; + cmd.valid.in.tf = IDE_VALID_NSECT; + cmd.tf_flags = IDE_TFLAG_SET_XFER; - err = ide_no_data_taskfile(drive, &task); - - if (!err) { - ide_set_xfer_rate(drive, (u8) arg); - ide_driveid_update(drive); - } - return err; + return ide_no_data_taskfile(drive, &cmd); } ide_devset_rw(current_speed, xfer_rate); @@ -231,37 +269,29 @@ static const struct ide_proc_devset ide_generic_settings[] = { IDE_PROC_DEVSET(pio_mode, 0, 255), IDE_PROC_DEVSET(unmaskirq, 0, 1), IDE_PROC_DEVSET(using_dma, 0, 1), - { 0 }, + { NULL }, }; static void proc_ide_settings_warn(void) { - static int warned; - - if (warned) - return; - - printk(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is " + printk_once(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is " "obsolete, and will be removed soon!\n"); - warned = 1; } -static int proc_ide_read_settings - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_settings_proc_show(struct seq_file *m, void *v) { const struct ide_proc_devset *setting, *g, *d; const struct ide_devset *ds; - ide_drive_t *drive = (ide_drive_t *) data; - char *out = page; - int len, rc, mul_factor, div_factor; + ide_drive_t *drive = (ide_drive_t *) m->private; + int rc, mul_factor, div_factor; proc_ide_settings_warn(); mutex_lock(&ide_setting_mtx); g = ide_generic_settings; d = drive->settings; - out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); - out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); + seq_printf(m, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); + seq_printf(m, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); while (g->name || (d && d->name)) { /* read settings in the alphabetical order */ if (g->name && d && d->name) { @@ -275,31 +305,35 @@ static int proc_ide_read_settings setting = g++; mul_factor = setting->mulf ? setting->mulf(drive) : 1; div_factor = setting->divf ? setting->divf(drive) : 1; - out += sprintf(out, "%-24s", setting->name); + seq_printf(m, "%-24s", setting->name); rc = ide_read_setting(drive, setting); if (rc >= 0) - out += sprintf(out, "%-16d", rc * mul_factor / div_factor); + seq_printf(m, "%-16d", rc * mul_factor / div_factor); else - out += sprintf(out, "%-16s", "write-only"); - out += sprintf(out, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor); + seq_printf(m, "%-16s", "write-only"); + seq_printf(m, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor); ds = setting->setting; if (ds->get) - out += sprintf(out, "r"); + seq_printf(m, "r"); if (ds->set) - out += sprintf(out, "w"); - out += sprintf(out, "\n"); + seq_printf(m, "w"); + seq_printf(m, "\n"); } - len = out - page; mutex_unlock(&ide_setting_mtx); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + return 0; +} + +static int ide_settings_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_settings_proc_show, PDE_DATA(inode)); } #define MAX_LEN 30 -static int proc_ide_write_settings(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t ide_settings_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = PDE_DATA(file_inode(file)); char name[MAX_LEN + 1]; int for_real = 0, mul_factor, div_factor; unsigned long n; @@ -394,63 +428,104 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer, return count; parse_error: free_page((unsigned long)buf); - printk("proc_ide_write_settings(): parse error\n"); + printk("%s(): parse error\n", __func__); return -EINVAL; } -int proc_ide_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations ide_settings_proc_fops = { + .owner = THIS_MODULE, + .open = ide_settings_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = ide_settings_proc_write, +}; + +static int ide_capacity_proc_show(struct seq_file *m, void *v) { - int len = sprintf(page, "%llu\n", (long long)0x7fffffff); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%llu\n", (long long)0x7fffffff); + return 0; } -EXPORT_SYMBOL_GPL(proc_ide_read_capacity); +static int ide_capacity_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_capacity_proc_show, NULL); +} -int proc_ide_read_geometry - (char *page, char **start, off_t off, int count, int *eof, void *data) +const struct file_operations ide_capacity_proc_fops = { + .owner = THIS_MODULE, + .open = ide_capacity_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +EXPORT_SYMBOL_GPL(ide_capacity_proc_fops); + +static int ide_geometry_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; - char *out = page; - int len; + ide_drive_t *drive = (ide_drive_t *) m->private; - out += sprintf(out, "physical %d/%d/%d\n", + seq_printf(m, "physical %d/%d/%d\n", drive->cyl, drive->head, drive->sect); - out += sprintf(out, "logical %d/%d/%d\n", + seq_printf(m, "logical %d/%d/%d\n", drive->bios_cyl, drive->bios_head, drive->bios_sect); + return 0; +} - len = out - page; - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +static int ide_geometry_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_geometry_proc_show, PDE_DATA(inode)); } -EXPORT_SYMBOL(proc_ide_read_geometry); +const struct file_operations ide_geometry_proc_fops = { + .owner = THIS_MODULE, + .open = ide_geometry_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +EXPORT_SYMBOL(ide_geometry_proc_fops); -static int proc_ide_read_dmodel - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_dmodel_proc_show(struct seq_file *seq, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = (ide_drive_t *) seq->private; char *m = (char *)&drive->id[ATA_ID_PROD]; - int len; - len = sprintf(page, "%.40s\n", m[0] ? m : "(none)"); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(seq, "%.40s\n", m[0] ? m : "(none)"); + return 0; } -static int proc_ide_read_driver - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_dmodel_proc_open(struct inode *inode, struct file *file) { - ide_drive_t *drive = (ide_drive_t *)data; + return single_open(file, ide_dmodel_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations ide_dmodel_proc_fops = { + .owner = THIS_MODULE, + .open = ide_dmodel_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int ide_driver_proc_show(struct seq_file *m, void *v) +{ + ide_drive_t *drive = (ide_drive_t *)m->private; struct device *dev = &drive->gendev; struct ide_driver *ide_drv; - int len; if (dev->driver) { ide_drv = to_ide_driver(dev->driver); - len = sprintf(page, "%s version %s\n", + seq_printf(m, "%s version %s\n", dev->driver->name, ide_drv->version); } else - len = sprintf(page, "ide-default version 0.9.newide\n"); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "ide-default version 0.9.newide\n"); + return 0; +} + +static int ide_driver_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_driver_proc_show, PDE_DATA(inode)); } static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) @@ -480,10 +555,10 @@ static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) return ret; } -static int proc_ide_write_driver - (struct file *file, const char __user *buffer, unsigned long count, void *data) +static ssize_t ide_driver_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = PDE_DATA(file_inode(file)); char name[32]; if (!capable(CAP_SYS_ADMIN)) @@ -498,12 +573,19 @@ static int proc_ide_write_driver return count; } -static int proc_ide_read_media - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations ide_driver_proc_fops = { + .owner = THIS_MODULE, + .open = ide_driver_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = ide_driver_proc_write, +}; + +static int ide_media_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = (ide_drive_t *) m->private; const char *media; - int len; switch (drive->media) { case ide_disk: media = "disk\n"; break; @@ -513,20 +595,30 @@ static int proc_ide_read_media case ide_optical: media = "optical\n"; break; default: media = "UNKNOWN\n"; break; } - strcpy(page, media); - len = strlen(media); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_puts(m, media); + return 0; +} + +static int ide_media_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_media_proc_show, PDE_DATA(inode)); } +static const struct file_operations ide_media_proc_fops = { + .owner = THIS_MODULE, + .open = ide_media_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static ide_proc_entry_t generic_drive_entries[] = { - { "driver", S_IFREG|S_IRUGO, proc_ide_read_driver, - proc_ide_write_driver }, - { "identify", S_IFREG|S_IRUSR, proc_ide_read_identify, NULL }, - { "media", S_IFREG|S_IRUGO, proc_ide_read_media, NULL }, - { "model", S_IFREG|S_IRUGO, proc_ide_read_dmodel, NULL }, - { "settings", S_IFREG|S_IRUSR|S_IWUSR, proc_ide_read_settings, - proc_ide_write_settings }, - { NULL, 0, NULL, NULL } + { "driver", S_IFREG|S_IRUGO, &ide_driver_proc_fops }, + { "identify", S_IFREG|S_IRUSR, &ide_identify_proc_fops}, + { "media", S_IFREG|S_IRUGO, &ide_media_proc_fops }, + { "model", S_IFREG|S_IRUGO, &ide_dmodel_proc_fops }, + { "settings", S_IFREG|S_IRUSR|S_IWUSR, &ide_settings_proc_fops}, + {} }; static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data) @@ -536,11 +628,8 @@ static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p if (!dir || !p) return; while (p->name != NULL) { - ent = create_proc_entry(p->name, p->mode, dir); + ent = proc_create_data(p->name, p->mode, dir, p->proc_fops, data); if (!ent) return; - ent->data = data; - ent->read_proc = p->read_proc; - ent->write_proc = p->write_proc; p++; } } @@ -600,7 +689,7 @@ void ide_proc_port_register_devices(ide_hwif_t *hwif) int i; ide_port_for_each_dev(i, drive, hwif) { - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0 || drive->proc) + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) continue; drive->proc = proc_mkdir(drive->name, parent); @@ -623,10 +712,10 @@ void ide_proc_unregister_device(ide_drive_t *drive) } static ide_proc_entry_t hwif_entries[] = { - { "channel", S_IFREG|S_IRUGO, proc_ide_read_channel, NULL }, - { "mate", S_IFREG|S_IRUGO, proc_ide_read_mate, NULL }, - { "model", S_IFREG|S_IRUGO, proc_ide_read_imodel, NULL }, - { NULL, 0, NULL, NULL } + { "channel", S_IFREG|S_IRUGO, &ide_channel_proc_fops }, + { "mate", S_IFREG|S_IRUGO, &ide_mate_proc_fops }, + { "model", S_IFREG|S_IRUGO, &ide_imodel_proc_fops }, + {} }; void ide_proc_register_port(ide_hwif_t *hwif) diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c index 0e79efff1de..c3da53e7bb2 100644 --- a/drivers/ide/ide-scan-pci.c +++ b/drivers/ide/ide-scan-pci.c @@ -88,7 +88,7 @@ static int __init ide_scan_pcibus(void) struct list_head *l, *n; pre_init = 0; - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev))) + for_each_pci_dev(dev) ide_scan_pcidev(dev); /* diff --git a/drivers/ide/ide-sysfs.c b/drivers/ide/ide-sysfs.c index 883ffacaf45..84a6a9e08d6 100644 --- a/drivers/ide/ide-sysfs.c +++ b/drivers/ide/ide-sysfs.c @@ -25,6 +25,7 @@ static ssize_t media_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", ide_media_string(drive)); } +static DEVICE_ATTR_RO(media); static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -32,6 +33,7 @@ static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", drive->name); } +static DEVICE_ATTR_RO(drivename); static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -39,6 +41,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "ide:m-%s\n", ide_media_string(drive)); } +static DEVICE_ATTR_RO(modalias); static ssize_t model_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -46,6 +49,7 @@ static ssize_t model_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]); } +static DEVICE_ATTR_RO(model); static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -53,6 +57,7 @@ static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]); } +static DEVICE_ATTR_RO(firmware); static ssize_t serial_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -60,16 +65,28 @@ static ssize_t serial_show(struct device *dev, struct device_attribute *attr, ide_drive_t *drive = to_ide_device(dev); return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]); } +static DEVICE_ATTR(serial, 0400, serial_show, NULL); + +static DEVICE_ATTR(unload_heads, 0644, ide_park_show, ide_park_store); + +static struct attribute *ide_attrs[] = { + &dev_attr_media.attr, + &dev_attr_drivename.attr, + &dev_attr_modalias.attr, + &dev_attr_model.attr, + &dev_attr_firmware.attr, + &dev_attr_serial.attr, + &dev_attr_unload_heads.attr, + NULL, +}; + +static const struct attribute_group ide_attr_group = { + .attrs = ide_attrs, +}; -struct device_attribute ide_dev_attrs[] = { - __ATTR_RO(media), - __ATTR_RO(drivename), - __ATTR_RO(modalias), - __ATTR_RO(model), - __ATTR_RO(firmware), - __ATTR(serial, 0400, serial_show, NULL), - __ATTR(unload_heads, 0644, ide_park_show, ide_park_store), - __ATTR_NULL +const struct attribute_group *ide_dev_groups[] = { + &ide_attr_group, + NULL, }; static ssize_t store_delete_devices(struct device *portdev, diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d7ecd3c7975..1793aea4a7d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -31,44 +31,28 @@ #include <linux/major.h> #include <linux/errno.h> #include <linux/genhd.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/pci.h> #include <linux/ide.h> -#include <linux/smp_lock.h> #include <linux/completion.h> #include <linux/bitops.h> #include <linux/mutex.h> #include <scsi/scsi.h> #include <asm/byteorder.h> -#include <linux/irq.h> #include <linux/uaccess.h> #include <linux/io.h> #include <asm/unaligned.h> #include <linux/mtio.h> -enum { - /* output errors only */ - DBG_ERR = (1 << 0), - /* output all sense key/asc */ - DBG_SENSE = (1 << 1), - /* info regarding all chrdev-related procedures */ - DBG_CHRDEV = (1 << 2), - /* all remaining procedures */ - DBG_PROCS = (1 << 3), -}; - /* define to see debug info */ -#define IDETAPE_DEBUG_LOG 0 +#undef IDETAPE_DEBUG_LOG -#if IDETAPE_DEBUG_LOG -#define debug_log(lvl, fmt, args...) \ -{ \ - if (tape->debug_mask & lvl) \ - printk(KERN_INFO "ide-tape: " fmt, ## args); \ -} +#ifdef IDETAPE_DEBUG_LOG +#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args) #else -#define debug_log(lvl, fmt, args...) do {} while (0) +#define ide_debug_log(lvl, fmt, args...) do {} while (0) #endif /**************************** Tunable parameters *****************************/ @@ -131,13 +115,6 @@ enum { IDETAPE_DIR_WRITE = (1 << 2), }; -struct idetape_bh { - u32 b_size; - atomic_t b_count; - struct idetape_bh *b_reqnext; - char *b_data; -}; - /* Tape door status */ #define DOOR_UNLOCKED 0 #define DOOR_LOCKED 1 @@ -152,11 +129,6 @@ struct idetape_bh { #define IDETAPE_LU_RETENSION_MASK 2 #define IDETAPE_LU_EOT_MASK 4 -/* Error codes returned in rq->errors to the higher part of the driver. */ -#define IDETAPE_ERROR_GENERAL 101 -#define IDETAPE_ERROR_FILEMARK 102 -#define IDETAPE_ERROR_EOD 103 - /* Structures related to the SELECT SENSE / MODE SENSE packet commands. */ #define IDETAPE_BLOCK_DESCRIPTOR 0 #define IDETAPE_CAPABILITIES_PAGE 0x2a @@ -169,16 +141,8 @@ typedef struct ide_tape_obj { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; - /* - * failed_pc points to the last failed packet command, or contains - * NULL if we do not need to retry any packet command. This is - * required since an additional packet command is needed before the - * retry, to get detailed information on what went wrong. - */ - /* Last failed packet command */ - struct ide_atapi_pc *failed_pc; /* used by REQ_IDETAPE_{READ,WRITE} requests */ struct ide_atapi_pc queued_pc; @@ -190,7 +154,8 @@ typedef struct ide_tape_obj { * other device. Note that at most we will have only one DSC (usually * data transfer) request in the device request queue. */ - struct request *postponed_rq; + bool postponed_rq; + /* The time in which we started polling for DSC */ unsigned long dsc_polling_start; /* Timer used to poll for dsc */ @@ -232,21 +197,12 @@ typedef struct ide_tape_obj { /* Data buffer size chosen based on the tape's recommendation */ int buffer_size; - /* merge buffer */ - struct idetape_bh *merge_bh; - /* size of the merge buffer */ - int merge_bh_size; - /* pointer to current buffer head within the merge buffer */ - struct idetape_bh *bh; - char *b_data; - int b_count; - - int pages_per_buffer; - /* Wasted space in each stage */ - int excess_bh_size; - - /* protects the ide-tape queue */ - spinlock_t lock; + /* Staging buffer of buffer_size bytes */ + void *buf; + /* The read/write cursor */ + void *cur; + /* The number of valid bytes in buf */ + size_t valid; /* Measures average tape speed */ unsigned long avg_time; @@ -259,28 +215,38 @@ typedef struct ide_tape_obj { char drv_write_prot; /* the tape is write protected (hardware or opened as read-only) */ char write_prot; - - u32 debug_mask; } idetape_tape_t; +static DEFINE_MUTEX(ide_tape_mutex); static DEFINE_MUTEX(idetape_ref_mutex); +static DEFINE_MUTEX(idetape_chrdev_mutex); + static struct class *idetape_sysfs_class; -static void ide_tape_release(struct kref *); +static void ide_tape_release(struct device *); + +static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES]; -static struct ide_tape_obj *ide_tape_get(struct gendisk *disk) +static struct ide_tape_obj *ide_tape_get(struct gendisk *disk, bool cdev, + unsigned int i) { struct ide_tape_obj *tape = NULL; mutex_lock(&idetape_ref_mutex); - tape = ide_drv_g(disk, ide_tape_obj); + + if (cdev) + tape = idetape_devs[i]; + else + tape = ide_drv_g(disk, ide_tape_obj); + if (tape) { if (ide_device_get(tape->drive)) tape = NULL; else - kref_get(&tape->kref); + get_device(&tape->dev); } + mutex_unlock(&idetape_ref_mutex); return tape; } @@ -290,132 +256,33 @@ static void ide_tape_put(struct ide_tape_obj *tape) ide_drive_t *drive = tape->drive; mutex_lock(&idetape_ref_mutex); - kref_put(&tape->kref, ide_tape_release); + put_device(&tape->dev); ide_device_put(drive); mutex_unlock(&idetape_ref_mutex); } /* - * The variables below are used for the character device interface. Additional - * state variables are defined in our ide_drive_t structure. - */ -static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES]; - -static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) -{ - struct ide_tape_obj *tape = NULL; - - mutex_lock(&idetape_ref_mutex); - tape = idetape_devs[i]; - if (tape) - kref_get(&tape->kref); - mutex_unlock(&idetape_ref_mutex); - return tape; -} - -static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - while (bcount) { - if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in " - "idetape_input_buffers\n"); - ide_pad_transfer(drive, 0, bcount); - return; - } - count = min( - (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), - bcount); - drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data + - atomic_read(&bh->b_count), count); - bcount -= count; - atomic_add(count, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } - } - pc->bh = bh; -} - -static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - while (bcount) { - if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return; - } - count = min((unsigned int)pc->b_count, (unsigned int)bcount); - drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count); - bcount -= count; - pc->b_data += count; - pc->b_count -= count; - if (!pc->b_count) { - bh = bh->b_reqnext; - pc->bh = bh; - if (bh) { - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); - } - } - } -} - -static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - struct idetape_bh *bh = pc->bh; - int count; - unsigned int bcount = pc->xferred; - - if (pc->flags & PC_FLAG_WRITING) - return; - while (bcount) { - if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return; - } - count = min((unsigned int)bh->b_size, (unsigned int)bcount); - atomic_set(&bh->b_count, count); - if (atomic_read(&bh->b_count) == bh->b_size) - bh = bh->b_reqnext; - bcount -= count; - } - pc->bh = bh; -} - -/* * called on each failed packet command retry to analyze the request sense. We * currently do not utilize this information. */ -static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) +static void idetape_analyze_error(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->failed_pc; + struct ide_atapi_pc *pc = drive->failed_pc; + struct request *rq = drive->hwif->rq; + u8 *sense = bio_data(rq->bio); tape->sense_key = sense[2] & 0xF; tape->asc = sense[12]; tape->ascq = sense[13]; - debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n", - pc->c[0], tape->sense_key, tape->asc, tape->ascq); + ide_debug_log(IDE_DBG_FUNC, + "cmd: 0x%x, sense key = %x, asc = %x, ascq = %x", + rq->cmd[0], tape->sense_key, tape->asc, tape->ascq); - /* Correct pc->xferred by asking the tape. */ - if (pc->flags & PC_FLAG_DMA_ERROR) { - pc->xferred = pc->req_xfer - - tape->blk_size * - get_unaligned_be32(&sense[3]); - idetape_update_buffers(drive, pc); - } + /* correct remaining bytes to transfer */ + if (pc->flags & PC_FLAG_DMA_ERROR) + rq->resid_len = tape->blk_size * get_unaligned_be32(&sense[3]); /* * If error was the result of a zero-length read or write command, @@ -433,106 +300,55 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) } } if (pc->c[0] == READ_6 && (sense[2] & 0x80)) { - pc->error = IDETAPE_ERROR_FILEMARK; + pc->error = IDE_DRV_ERROR_FILEMARK; pc->flags |= PC_FLAG_ABORT; } if (pc->c[0] == WRITE_6) { if ((sense[2] & 0x40) || (tape->sense_key == 0xd && tape->asc == 0x0 && tape->ascq == 0x2)) { - pc->error = IDETAPE_ERROR_EOD; + pc->error = IDE_DRV_ERROR_EOD; pc->flags |= PC_FLAG_ABORT; } } if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) { if (tape->sense_key == 8) { - pc->error = IDETAPE_ERROR_EOD; + pc->error = IDE_DRV_ERROR_EOD; pc->flags |= PC_FLAG_ABORT; } if (!(pc->flags & PC_FLAG_ABORT) && - pc->xferred) + (blk_rq_bytes(rq) - rq->resid_len)) pc->retries = IDETAPE_MAX_PC_RETRIES + 1; } } -/* Free data buffers completely. */ -static void ide_tape_kfree_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *prev_bh, *bh = tape->merge_bh; - - while (bh) { - u32 size = bh->b_size; - - while (size) { - unsigned int order = fls(size >> PAGE_SHIFT)-1; - - if (bh->b_data) - free_pages((unsigned long)bh->b_data, order); - - size &= (order-1); - bh->b_data += (1 << order) * PAGE_SIZE; - } - prev_bh = bh; - bh = bh->b_reqnext; - kfree(prev_bh); - } -} - -static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) -{ - struct request *rq = drive->hwif->rq; - idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - int error; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - switch (uptodate) { - case 0: error = IDETAPE_ERROR_GENERAL; break; - case 1: error = 0; break; - default: error = uptodate; - } - rq->errors = error; - if (error) - tape->failed_pc = NULL; - - if (!blk_special_request(rq)) { - ide_end_request(drive, uptodate, nr_sects); - return 0; - } - - spin_lock_irqsave(&tape->lock, flags); - - ide_end_drive_cmd(drive, 0, 0); - - spin_unlock_irqrestore(&tape->lock, flags); - return 0; -} - static void ide_tape_handle_dsc(ide_drive_t *); -static void ide_tape_callback(ide_drive_t *drive, int dsc) +static int ide_tape_callback(ide_drive_t *drive, int dsc) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc *pc = drive->pc; + struct request *rq = drive->hwif->rq; int uptodate = pc->error ? 0 : 1; + int err = uptodate ? 0 : IDE_DRV_ERROR_GENERAL; - debug_log(DBG_PROCS, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc: %d, err: %d", rq->cmd[0], + dsc, err); if (dsc) ide_tape_handle_dsc(drive); - if (tape->failed_pc == pc) - tape->failed_pc = NULL; + if (drive->failed_pc == pc) + drive->failed_pc = NULL; if (pc->c[0] == REQUEST_SENSE) { if (uptodate) - idetape_analyze_error(drive, pc->buf); + idetape_analyze_error(drive); else printk(KERN_ERR "ide-tape: Error in REQUEST SENSE " "itself - Aborting request!\n"); } else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) { - struct request *rq = drive->hwif->rq; - int blocks = pc->xferred / tape->blk_size; + unsigned int blocks = + (blk_rq_bytes(rq) - rq->resid_len) / tape->blk_size; tape->avg_size += blocks * tape->blk_size; @@ -544,47 +360,29 @@ static void ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->current_nr_sectors -= blocks; - - if (pc->error) - uptodate = pc->error; - } else if (pc->c[0] == READ_POSITION && uptodate) { - u8 *readpos = pc->buf; - debug_log(DBG_SENSE, "BOP - %s\n", - (readpos[0] & 0x80) ? "Yes" : "No"); - debug_log(DBG_SENSE, "EOP - %s\n", - (readpos[0] & 0x40) ? "Yes" : "No"); - - if (readpos[0] & 0x4) { - printk(KERN_INFO "ide-tape: Block location is unknown" - "to the tape\n"); - clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags); + if (pc->error) { uptodate = 0; - } else { - debug_log(DBG_SENSE, "Block Location - %u\n", - be32_to_cpup((__be32 *)&readpos[4])); - - tape->partition = readpos[1]; - tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]); - set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags); + err = pc->error; } } + rq->errors = err; - idetape_end_request(drive, uptodate, 0); + return uptodate; } /* * Postpone the current request so that ide.c will be able to service requests * from another device on the same port while we are polling for DSC. */ -static void idetape_postpone_request(ide_drive_t *drive) +static void ide_tape_stall_queue(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - debug_log(DBG_PROCS, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc_poll_freq: %lu", + drive->hwif->rq->cmd[0], tape->dsc_poll_freq); - tape->postponed_rq = drive->hwif->rq; + tape->postponed_rq = true; ide_stall_queue(drive, tape->dsc_poll_freq); } @@ -598,18 +396,7 @@ static void ide_tape_handle_dsc(ide_drive_t *drive) tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST; tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT; /* Allow ide.c to handle other requests */ - idetape_postpone_request(drive); -} - -static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int write) -{ - if (write) - idetape_output_buffers(drive, pc, bcount); - else - idetape_input_buffers(drive, pc, bcount); - - return bcount; + ide_tape_stall_queue(drive); } /* @@ -621,7 +408,7 @@ static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, * * The handling will be done in three stages: * - * 1. idetape_issue_pc will send the packet command to the drive, and will set + * 1. ide_tape_issue_pc will send the packet command to the drive, and will set * the interrupt handler to ide_pc_intr. * * 2. On each interrupt, ide_pc_intr will be called. This step will be @@ -649,25 +436,22 @@ static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, * request. */ -static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, - struct ide_atapi_pc *pc) +static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, + struct ide_cmd *cmd, + struct ide_atapi_pc *pc) { idetape_tape_t *tape = drive->driver_data; + struct request *rq = drive->hwif->rq; - if (drive->pc->c[0] == REQUEST_SENSE && - pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " - "Two request sense in serial were issued\n"); - } - - if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) - tape->failed_pc = pc; + if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) + drive->failed_pc = pc; /* Set the current packet command */ drive->pc = pc; if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FLAG_ABORT)) { + /* * We will "abort" retrying a packet command in case legitimate * error code was received (crossing a filemark, or end of the @@ -685,17 +469,20 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, tape->ascq); } /* Giving up */ - pc->error = IDETAPE_ERROR_GENERAL; + pc->error = IDE_DRV_ERROR_GENERAL; } - tape->failed_pc = NULL; + + drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); return ide_stopped; } - debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); + ide_debug_log(IDE_DBG_SENSE, "retry #%d, cmd: 0x%02x", pc->retries, + pc->c[0]); pc->retries++; - return ide_issue_pc(drive); + return ide_issue_pc(drive, cmd); } /* A mode sense command is used to "sense" tape parameters. */ @@ -741,13 +528,13 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ - ide_retry_pc(drive, tape->disk); + ide_retry_pc(drive); return ide_stopped; } pc->error = 0; } else { - pc->error = IDETAPE_ERROR_GENERAL; - tape->failed_pc = NULL; + pc->error = IDE_DRV_ERROR_GENERAL; + drive->failed_pc = NULL; } drive->pc_callback(drive, 0); return ide_stopped; @@ -757,27 +544,20 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, struct ide_atapi_pc *pc, struct request *rq, u8 opcode) { - struct idetape_bh *bh = (struct idetape_bh *)rq->special; - unsigned int length = rq->current_nr_sectors; + unsigned int length = blk_rq_sectors(rq) / (tape->blk_size >> 9); ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->bh = bh; - pc->buf = NULL; - pc->buf_size = length * tape->blk_size; - pc->req_xfer = pc->buf_size; - if (pc->req_xfer == tape->buffer_size) + + if (blk_rq_bytes(rq) == tape->buffer_size) pc->flags |= PC_FLAG_DMA_OK; - if (opcode == READ_6) { + if (opcode == READ_6) pc->c[0] = READ_6; - atomic_set(&bh->b_count, 0); - } else if (opcode == WRITE_6) { + else if (opcode == WRITE_6) { pc->c[0] = WRITE_6; pc->flags |= PC_FLAG_WRITING; - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); } memcpy(rq->cmd, pc->c, 12); @@ -789,38 +569,22 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc *pc = NULL; - struct request *postponed_rq = tape->postponed_rq; + struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu," - " current_nr_sectors: %u\n", - (unsigned long long)rq->sector, rq->nr_sectors, - rq->current_nr_sectors); + ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, sector: %llu, nr_sectors: %u", + rq->cmd[0], (unsigned long long)blk_rq_pos(rq), + blk_rq_sectors(rq)); - if (!blk_special_request(rq)) { - /* We do not support buffer cache originated requests. */ - printk(KERN_NOTICE "ide-tape: %s: Unsupported request in " - "request queue (%d)\n", drive->name, rq->cmd_type); - ide_end_request(drive, 0, 0); - return ide_stopped; - } + BUG_ON(!(rq->cmd_type == REQ_TYPE_SPECIAL || + rq->cmd_type == REQ_TYPE_SENSE)); /* Retry a failed packet command */ - if (tape->failed_pc && drive->pc->c[0] == REQUEST_SENSE) { - pc = tape->failed_pc; + if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) { + pc = drive->failed_pc; goto out; } - if (postponed_rq != NULL) - if (rq != postponed_rq) { - printk(KERN_ERR "ide-tape: ide-tape.c bug - " - "Two DSC requests were queued\n"); - idetape_end_request(drive, 0, 0); - return ide_stopped; - } - - tape->postponed_rq = NULL; - /* * If the tape is still busy, postpone our request and service * the other device meanwhile. @@ -829,16 +593,16 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 && (rq->cmd[13] & REQ_IDETAPE_PC2) == 0) - set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); + drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC; if (drive->dev_flags & IDE_DFLAG_POST_RESET) { - set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); + drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC; drive->dev_flags &= ~IDE_DFLAG_POST_RESET; } - if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) && - (stat & ATA_DSC) == 0) { - if (postponed_rq == NULL) { + if (!(drive->atapi_flags & IDE_AFLAG_IGNORE_DSC) && + !(stat & ATA_DSC)) { + if (!tape->postponed_rq) { tape->dsc_polling_start = jiffies; tape->dsc_poll_freq = tape->best_dsc_rw_freq; tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT; @@ -855,9 +619,13 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD)) tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW; - idetape_postpone_request(drive); + ide_tape_stall_queue(drive); return ide_stopped; + } else { + drive->atapi_flags &= ~IDE_AFLAG_IGNORE_DSC; + tape->postponed_rq = false; } + if (rq->cmd[13] & REQ_IDETAPE_READ) { pc = &tape->queued_pc; ide_tape_create_rw_cmd(tape, pc, rq, READ_6); @@ -869,7 +637,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, goto out; } if (rq->cmd[13] & REQ_IDETAPE_PC1) { - pc = (struct ide_atapi_pc *) rq->buffer; + pc = (struct ide_atapi_pc *)rq->special; rq->cmd[13] &= ~(REQ_IDETAPE_PC1); rq->cmd[13] |= REQ_IDETAPE_PC2; goto out; @@ -881,167 +649,20 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, BUG(); out: - return idetape_issue_pc(drive, pc); -} + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); -/* - * The function below uses __get_free_pages to allocate a data buffer of size - * tape->buffer_size (or a bit more). We attempt to combine sequential pages as - * much as possible. - * - * It returns a pointer to the newly allocated buffer, or NULL in case of - * failure. - */ -static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, - int full, int clear) -{ - struct idetape_bh *prev_bh, *bh, *merge_bh; - int pages = tape->pages_per_buffer; - unsigned int order, b_allocd; - char *b_data = NULL; - - merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - bh = merge_bh; - if (bh == NULL) - goto abort; - - order = fls(pages) - 1; - bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!bh->b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - pages &= (order-1); - - if (clear) - memset(bh->b_data, 0, b_allocd); - bh->b_reqnext = NULL; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - - while (pages) { - order = fls(pages) - 1; - b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - - if (clear) - memset(b_data, 0, b_allocd); - - /* newly allocated page frames below buffer header or ...*/ - if (bh->b_data == b_data + b_allocd) { - bh->b_size += b_allocd; - bh->b_data -= b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - /* they are above the header */ - if (b_data == bh->b_data + bh->b_size) { - bh->b_size += b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - prev_bh = bh; - bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - if (!bh) { - free_pages((unsigned long) b_data, order); - goto abort; - } - bh->b_reqnext = NULL; - bh->b_data = b_data; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - prev_bh->b_reqnext = bh; + memset(&cmd, 0, sizeof(cmd)); - pages &= (order-1); - } + if (rq_data_dir(rq)) + cmd.tf_flags |= IDE_TFLAG_WRITE; - bh->b_size -= tape->excess_bh_size; - if (full) - atomic_sub(tape->excess_bh_size, &bh->b_count); - return merge_bh; -abort: - ide_tape_kfree_buffer(tape); - return NULL; -} + cmd.rq = rq; -static int idetape_copy_stage_from_user(idetape_tape_t *tape, - const char __user *buf, int n) -{ - struct idetape_bh *bh = tape->bh; - int count; - int ret = 0; - - while (n) { - if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - count = min((unsigned int) - (bh->b_size - atomic_read(&bh->b_count)), - (unsigned int)n); - if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, - count)) - ret = 1; - n -= count; - atomic_add(count, &bh->b_count); - buf += count; - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } - } - tape->bh = bh; - return ret; -} + ide_init_sg_cmd(&cmd, blk_rq_bytes(rq)); + ide_map_sg(drive, &cmd); -static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, - int n) -{ - struct idetape_bh *bh = tape->bh; - int count; - int ret = 0; - - while (n) { - if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - count = min(tape->b_count, n); - if (copy_to_user(buf, tape->b_data, count)) - ret = 1; - n -= count; - tape->b_data += count; - tape->b_count -= count; - buf += count; - if (!tape->b_count) { - bh = bh->b_reqnext; - tape->bh = bh; - if (bh) { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } - } - } - return ret; -} - -static void idetape_init_merge_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *bh = tape->merge_bh; - tape->bh = tape->merge_bh; - - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) - atomic_set(&bh->b_count, 0); - else { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } + return ide_tape_issue_pc(drive, &cmd, pc); } /* @@ -1064,7 +685,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) int load_attempted = 0; /* Wait for the tape to become ready */ - set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags); + set_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT), &drive->atapi_flags); timeout += jiffies; while (time_before(jiffies, timeout)) { if (ide_do_test_unit_ready(drive, disk) == 0) @@ -1092,33 +713,53 @@ static int idetape_flush_tape_buffers(ide_drive_t *drive) int rc; idetape_create_write_filemark_cmd(drive, &pc, 0); - rc = ide_queue_pc_tail(drive, tape->disk, &pc); + rc = ide_queue_pc_tail(drive, tape->disk, &pc, NULL, 0); if (rc) return rc; idetape_wait_ready(drive, 60 * 5 * HZ); return 0; } -static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc) -{ - ide_init_pc(pc); - pc->c[0] = READ_POSITION; - pc->req_xfer = 20; -} - -static int idetape_read_position(ide_drive_t *drive) +static int ide_tape_read_position(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc pc; - int position; + u8 buf[20]; + + ide_debug_log(IDE_DBG_FUNC, "enter"); - debug_log(DBG_PROCS, "Enter %s\n", __func__); + /* prep cmd */ + ide_init_pc(&pc); + pc.c[0] = READ_POSITION; + pc.req_xfer = 20; - idetape_create_read_position_cmd(&pc); - if (ide_queue_pc_tail(drive, tape->disk, &pc)) + if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) return -1; - position = tape->first_frame; - return position; + + if (!pc.error) { + ide_debug_log(IDE_DBG_FUNC, "BOP - %s", + (buf[0] & 0x80) ? "Yes" : "No"); + ide_debug_log(IDE_DBG_FUNC, "EOP - %s", + (buf[0] & 0x40) ? "Yes" : "No"); + + if (buf[0] & 0x4) { + printk(KERN_INFO "ide-tape: Block location is unknown" + "to the tape\n"); + clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), + &drive->atapi_flags); + return -1; + } else { + ide_debug_log(IDE_DBG_FUNC, "Block Location: %u", + be32_to_cpup((__be32 *)&buf[4])); + + tape->partition = buf[1]; + tape->first_frame = be32_to_cpup((__be32 *)&buf[4]); + set_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), + &drive->atapi_flags); + } + } + + return tape->first_frame; } static void idetape_create_locate_cmd(ide_drive_t *drive, @@ -1140,11 +781,11 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive) if (tape->chrdev_dir != IDETAPE_DIR_READ) return; - clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags); - tape->merge_bh_size = 0; - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + clear_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags); + tape->valid = 0; + if (tape->buf != NULL) { + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; @@ -1161,19 +802,21 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block, { idetape_tape_t *tape = drive->driver_data; struct gendisk *disk = tape->disk; - int retval; + int ret; struct ide_atapi_pc pc; if (tape->chrdev_dir == IDETAPE_DIR_READ) __ide_tape_discard_merge_buffer(drive); idetape_wait_ready(drive, 60 * 5 * HZ); idetape_create_locate_cmd(drive, &pc, block, partition, skip); - retval = ide_queue_pc_tail(drive, disk, &pc); - if (retval) - return (retval); + ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0); + if (ret) + return ret; - idetape_create_read_position_cmd(&pc); - return ide_queue_pc_tail(drive, disk, &pc); + ret = ide_tape_read_position(drive); + if (ret < 0) + return ret; + return 0; } static void ide_tape_discard_merge_buffer(ide_drive_t *drive, @@ -1184,7 +827,7 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, __ide_tape_discard_merge_buffer(drive); if (restore_position) { - position = idetape_read_position(drive); + position = ide_tape_read_position(drive); seek = position > 0 ? position : 0; if (idetape_position_tape(drive, seek, 0, 0)) { printk(KERN_INFO "ide-tape: %s: position_tape failed in" @@ -1198,36 +841,45 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, - struct idetape_bh *bh) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) { idetape_tape_t *tape = drive->driver_data; struct request *rq; - int ret, errors; + int ret; - debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, size: %d", cmd, size); + + BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); + BUG_ON(size < 0 || size % tape->blk_size); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd[13] = cmd; rq->rq_disk = tape->disk; - rq->special = (void *)bh; - rq->sector = tape->first_frame; - rq->nr_sectors = blocks; - rq->current_nr_sectors = blocks; - blk_execute_rq(drive->queue, tape->disk, rq, 0); + rq->__sector = tape->first_frame; - errors = rq->errors; - ret = tape->blk_size * (blocks - rq->current_nr_sectors); - blk_put_request(rq); + if (size) { + ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size, + __GFP_WAIT); + if (ret) + goto out_put; + } - if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) - return 0; + blk_execute_rq(drive->queue, tape->disk, rq, 0); - if (tape->merge_bh) - idetape_init_merge_buffer(tape); - if (errors == IDETAPE_ERROR_GENERAL) - return -EIO; + /* calculate the number of transferred bytes and update buffer state */ + size -= rq->resid_len; + tape->cur = tape->buf; + if (cmd == REQ_IDETAPE_READ) + tape->valid = size; + else + tape->valid = 0; + + ret = size; + if (rq->errors == IDE_DRV_ERROR_GENERAL) + ret = -EIO; +out_put: + blk_put_request(rq); return ret; } @@ -1264,153 +916,87 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) pc->flags |= PC_FLAG_WAIT_FOR_DSC; } -/* Queue up a character device originated write request. */ -static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) -{ - idetape_tape_t *tape = drive->driver_data; - - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - blocks, tape->merge_bh); -} - static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int blocks, min; - struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" " but we are not writing.\n"); return; } - if (tape->merge_bh_size > tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n"); - tape->merge_bh_size = tape->buffer_size; - } - if (tape->merge_bh_size) { - blocks = tape->merge_bh_size / tape->blk_size; - if (tape->merge_bh_size % tape->blk_size) { - unsigned int i; - - blocks++; - i = tape->blk_size - tape->merge_bh_size % - tape->blk_size; - bh = tape->bh->b_reqnext; - while (bh) { - atomic_set(&bh->b_count, 0); - bh = bh->b_reqnext; - } - bh = tape->bh; - while (i) { - if (bh == NULL) { - printk(KERN_INFO "ide-tape: bug," - " bh NULL\n"); - break; - } - min = min(i, (unsigned int)(bh->b_size - - atomic_read(&bh->b_count))); - memset(bh->b_data + atomic_read(&bh->b_count), - 0, min); - atomic_add(min, &bh->b_count); - i -= min; - bh = bh->b_reqnext; - } - } - (void) idetape_add_chrdev_write_request(drive, blocks); - tape->merge_bh_size = 0; - } - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + if (tape->buf) { + size_t aligned = roundup(tape->valid, tape->blk_size); + + memset(tape->cur, 0, aligned - tape->valid); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned); + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; } -static int idetape_init_read(ide_drive_t *drive) +static int idetape_init_rw(ide_drive_t *drive, int dir) { idetape_tape_t *tape = drive->driver_data; - int bytes_read; - - /* Initialize read operation */ - if (tape->chrdev_dir != IDETAPE_DIR_READ) { - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { - ide_tape_flush_merge_buffer(drive); - idetape_flush_tape_buffers(drive); - } - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size should be" - " 0 now\n"); - tape->merge_bh_size = 0; - } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); - if (!tape->merge_bh) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_READ; + int rc; - /* - * Issue a read 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. - * No point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0, - tape->merge_bh); - if (bytes_read < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return bytes_read; - } - } - } + BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE); - return 0; -} + if (tape->chrdev_dir == dir) + return 0; -/* called from idetape_chrdev_read() to service a chrdev read request. */ -static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) -{ - idetape_tape_t *tape = drive->driver_data; + if (tape->chrdev_dir == IDETAPE_DIR_READ) + ide_tape_discard_merge_buffer(drive, 1); + else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { + ide_tape_flush_merge_buffer(drive); + idetape_flush_tape_buffers(drive); + } - debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; + } - /* If we are at a filemark, return a read length of 0 */ - if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) - return 0; + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) + return -ENOMEM; + tape->chrdev_dir = dir; + tape->cur = tape->buf; - idetape_init_read(drive); + /* + * Issue a 0 rw command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. No + * point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. + */ + if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { + int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ + : REQ_IDETAPE_WRITE; + + rc = idetape_queue_rw_tail(drive, cmd, 0); + if (rc < 0) { + kfree(tape->buf); + tape->buf = NULL; + tape->chrdev_dir = IDETAPE_DIR_NONE; + return rc; + } + } - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, - tape->merge_bh); + return 0; } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; - struct idetape_bh *bh; - int blocks; + + memset(tape->buf, 0, tape->buffer_size); while (bcount) { - unsigned int count; + unsigned int count = min(tape->buffer_size, bcount); - bh = tape->merge_bh; - count = min(tape->buffer_size, bcount); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count); bcount -= count; - blocks = count / tape->blk_size; - while (count) { - atomic_set(&bh->b_count, - min(count, (unsigned int)bh->b_size)); - memset(bh->b_data, 0, atomic_read(&bh->b_count)); - count -= atomic_read(&bh->b_count); - bh = bh->b_reqnext; - } - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, - tape->merge_bh); } } @@ -1422,20 +1008,19 @@ static int idetape_rewind_tape(ide_drive_t *drive) { struct ide_tape_obj *tape = drive->driver_data; struct gendisk *disk = tape->disk; - int retval; struct ide_atapi_pc pc; + int ret; - debug_log(DBG_SENSE, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); idetape_create_rewind_cmd(drive, &pc); - retval = ide_queue_pc_tail(drive, disk, &pc); - if (retval) - return retval; + ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0); + if (ret) + return ret; - idetape_create_read_position_cmd(&pc); - retval = ide_queue_pc_tail(drive, disk, &pc); - if (retval) - return retval; + ret = ide_tape_read_position(drive); + if (ret < 0) + return ret; return 0; } @@ -1452,7 +1037,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, int nr_stages; } config; - debug_log(DBG_PROCS, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%04x", cmd); switch (cmd) { case 0x0340: @@ -1461,6 +1046,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, tape->best_dsc_rw_freq = config.dsc_rw_frequency; break; case 0x0350: + memset(&config, 0, sizeof(config)); config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq; config.nr_stages = 1; if (copy_to_user(argp, &config, sizeof(config))) @@ -1481,6 +1067,9 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, int retval, count = 0; int sprev = !!(tape->caps[4] & 0x20); + + ide_debug_log(IDE_DBG_FUNC, "mt_op: %d, mt_count: %d", mt_op, mt_count); + if (mt_count == 0) return 0; if (MTBSF == mt_op || MTBSFM == mt_op) { @@ -1490,8 +1079,9 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, } if (tape->chrdev_dir == IDETAPE_DIR_READ) { - tape->merge_bh_size = 0; - if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) + tape->valid = 0; + if (test_and_clear_bit(ilog2(IDE_AFLAG_FILEMARK), + &drive->atapi_flags)) ++count; ide_tape_discard_merge_buffer(drive, 0); } @@ -1501,7 +1091,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, case MTBSF: idetape_create_space_cmd(&pc, mt_count - count, IDETAPE_SPACE_OVER_FILEMARK); - return ide_queue_pc_tail(drive, disk, &pc); + return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); case MTFSFM: case MTBSFM: if (!sprev) @@ -1539,61 +1129,54 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t bytes_read, temp, actually_read = 0, rc; + size_t done = 0; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; + int rc; - debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); + ide_debug_log(IDE_DBG_FUNC, "count %Zd", count); if (tape->chrdev_dir != IDETAPE_DIR_READ) { - if (test_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags)) + if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags)) if (count > tape->blk_size && (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } - rc = idetape_init_read(drive); + + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; - if (count == 0) - return (0); - if (tape->merge_bh_size) { - actually_read = min((unsigned int)(tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_to_user(tape, buf, actually_read)) - ret = -EFAULT; - buf += actually_read; - tape->merge_bh_size -= actually_read; - count -= actually_read; - } - while (count >= tape->buffer_size) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); - if (bytes_read <= 0) - goto finish; - if (idetape_copy_stage_to_user(tape, buf, bytes_read)) - ret = -EFAULT; - buf += bytes_read; - count -= bytes_read; - actually_read += bytes_read; - } - if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); - if (bytes_read <= 0) - goto finish; - temp = min((unsigned long)count, (unsigned long)bytes_read); - if (idetape_copy_stage_to_user(tape, buf, temp)) + + while (done < count) { + size_t todo; + + /* refill if staging buffer is empty */ + if (!tape->valid) { + /* If we are at a filemark, nothing more to read */ + if (test_bit(ilog2(IDE_AFLAG_FILEMARK), + &drive->atapi_flags)) + break; + /* read */ + if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, + tape->buffer_size) <= 0) + break; + } + + /* copy out */ + todo = min_t(size_t, count - done, tape->valid); + if (copy_to_user(buf + done, tape->cur, todo)) ret = -EFAULT; - actually_read += temp; - tape->merge_bh_size = bytes_read-temp; + + tape->cur += todo; + tape->valid -= todo; + done += todo; } -finish: - if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { - debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name); + if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) { idetape_space_over_filemarks(drive, MTFSF, 1); return 0; } - return ret ? ret : actually_read; + return ret ? ret : done; } static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, @@ -1601,91 +1184,42 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t actually_written = 0; + size_t done = 0; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; + int rc; /* The drive is write protected. */ if (tape->write_prot) return -EACCES; - debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); + ide_debug_log(IDE_DBG_FUNC, "count %Zd", count); /* Initialize write operation */ - if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { - if (tape->chrdev_dir == IDETAPE_DIR_READ) - ide_tape_discard_merge_buffer(drive, 1); - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size " - "should be 0 now\n"); - tape->merge_bh_size = 0; - } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); - if (!tape->merge_bh) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_WRITE; - idetape_init_merge_buffer(tape); + rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); + if (rc < 0) + return rc; - /* - * Issue a write 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. No - * point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0, - tape->merge_bh); - if (retval < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return retval; - } - } - } - if (count == 0) - return (0); - if (tape->merge_bh_size) { - if (tape->merge_bh_size >= tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge buf too big\n"); - tape->merge_bh_size = 0; - } - actually_written = min((unsigned int) - (tape->buffer_size - tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_from_user(tape, buf, actually_written)) - ret = -EFAULT; - buf += actually_written; - tape->merge_bh_size += actually_written; - count -= actually_written; - - if (tape->merge_bh_size == tape->buffer_size) { - ssize_t retval; - tape->merge_bh_size = 0; - retval = idetape_add_chrdev_write_request(drive, ctl); - if (retval <= 0) - return (retval); - } - } - while (count >= tape->buffer_size) { - ssize_t retval; - if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size)) - ret = -EFAULT; - buf += tape->buffer_size; - count -= tape->buffer_size; - retval = idetape_add_chrdev_write_request(drive, ctl); - actually_written += tape->buffer_size; - if (retval <= 0) - return (retval); - } - if (count) { - actually_written += count; - if (idetape_copy_stage_from_user(tape, buf, count)) + while (done < count) { + size_t todo; + + /* flush if staging buffer is full */ + if (tape->valid == tape->buffer_size && + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + tape->buffer_size) <= 0) + return rc; + + /* copy in */ + todo = min_t(size_t, count - done, + tape->buffer_size - tape->valid); + if (copy_from_user(tape->cur, buf + done, todo)) ret = -EFAULT; - tape->merge_bh_size += count; + + tape->cur += todo; + tape->valid += todo; + done += todo; } - return ret ? ret : actually_written; + + return ret ? ret : done; } static int idetape_write_filemark(ide_drive_t *drive) @@ -1695,7 +1229,7 @@ static int idetape_write_filemark(ide_drive_t *drive) /* Write a filemark */ idetape_create_write_filemark_cmd(drive, &pc, 1); - if (ide_queue_pc_tail(drive, tape->disk, &pc)) { + if (ide_queue_pc_tail(drive, tape->disk, &pc, NULL, 0)) { printk(KERN_ERR "ide-tape: Couldn't write a filemark\n"); return -EIO; } @@ -1722,8 +1256,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) struct ide_atapi_pc pc; int i, retval; - debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n", - mt_op, mt_count); + ide_debug_log(IDE_DBG_FUNC, "MTIOCTOP ioctl: mt_op: %d, mt_count: %d", + mt_op, mt_count); switch (mt_op) { case MTFSF: @@ -1769,7 +1303,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) ide_tape_discard_merge_buffer(drive, 0); retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK); if (!retval) - clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags); + clear_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT), + &drive->atapi_flags); return retval; case MTNOP: ide_tape_discard_merge_buffer(drive, 0); @@ -1780,20 +1315,22 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK); case MTEOM: idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD); - return ide_queue_pc_tail(drive, disk, &pc); + return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); case MTERASE: (void)idetape_rewind_tape(drive); idetape_create_erase_cmd(&pc); - return ide_queue_pc_tail(drive, disk, &pc); + return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); case MTSETBLK: if (mt_count) { if (mt_count < tape->blk_size || mt_count % tape->blk_size) return -EIO; tape->user_bs_factor = mt_count / tape->blk_size; - clear_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags); + clear_bit(ilog2(IDE_AFLAG_DETECT_BS), + &drive->atapi_flags); } else - set_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags); + set_bit(ilog2(IDE_AFLAG_DETECT_BS), + &drive->atapi_flags); return 0; case MTSEEK: ide_tape_discard_merge_buffer(drive, 0); @@ -1828,7 +1365,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) * supported here, and not in the corresponding block interface. Our own * ide-tape ioctls are supported on both interfaces. */ -static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, +static long do_idetape_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct ide_tape_obj *tape = file->private_data; @@ -1839,16 +1376,16 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, int block_offset = 0, position = tape->first_frame; void __user *argp = (void __user *)arg; - debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x", cmd); if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { ide_tape_flush_merge_buffer(drive); idetape_flush_tape_buffers(drive); } if (cmd == MTIOCGET || cmd == MTIOCPOS) { - block_offset = tape->merge_bh_size / + block_offset = tape->valid / (tape->blk_size * tape->user_bs_factor); - position = idetape_read_position(drive); + position = ide_tape_read_position(drive); if (position < 0) return -EIO; } @@ -1883,6 +1420,16 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, } } +static long idetape_chrdev_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + long ret; + mutex_lock(&ide_tape_mutex); + ret = do_idetape_chrdev_ioctl(file, cmd, arg); + mutex_unlock(&ide_tape_mutex); + return ret; +} + /* * Do a mode sense page 0 with block descriptor and if it succeeds set the tape * block size with the reported value. @@ -1891,9 +1438,10 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc pc; + u8 buf[12]; idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); - if (ide_queue_pc_tail(drive, tape->disk, &pc)) { + if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) { printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); if (tape->blk_size == 0) { printk(KERN_WARNING "ide-tape: Cannot deal with zero " @@ -1902,10 +1450,13 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) } return; } - tape->blk_size = (pc.buf[4 + 5] << 16) + - (pc.buf[4 + 6] << 8) + - pc.buf[4 + 7]; - tape->drv_write_prot = (pc.buf[2] & 0x80) >> 7; + tape->blk_size = (buf[4 + 5] << 16) + + (buf[4 + 6] << 8) + + buf[4 + 7]; + tape->drv_write_prot = (buf[2] & 0x80) >> 7; + + ide_debug_log(IDE_DBG_FUNC, "blk_size: %d, write_prot: %d", + tape->blk_size, tape->drv_write_prot); } static int idetape_chrdev_open(struct inode *inode, struct file *filp) @@ -1918,14 +1469,18 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) if (i >= MAX_HWIFS * MAX_DRIVES) return -ENXIO; - lock_kernel(); - tape = ide_tape_chrdev_get(i); + mutex_lock(&idetape_chrdev_mutex); + + tape = ide_tape_get(NULL, true, i); if (!tape) { - unlock_kernel(); + mutex_unlock(&idetape_chrdev_mutex); return -ENXIO; } - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); + drive = tape->drive; + filp->private_data = tape; + + ide_debug_log(IDE_DBG_FUNC, "enter"); /* * We really want to do nonseekable_open(inode, filp); here, but some @@ -1934,24 +1489,21 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) */ filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); - drive = tape->drive; - - filp->private_data = tape; - if (test_and_set_bit(IDE_AFLAG_BUSY, &drive->atapi_flags)) { + if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) { retval = -EBUSY; goto out_put_tape; } retval = idetape_wait_ready(drive, 60 * HZ); if (retval) { - clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags); + clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags); printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name); goto out_put_tape; } - idetape_read_position(drive); - if (!test_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags)) + ide_tape_read_position(drive); + if (!test_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), &drive->atapi_flags)) (void)idetape_rewind_tape(drive); /* Read block size and write protect status from drive. */ @@ -1967,7 +1519,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) if (tape->write_prot) { if ((filp->f_flags & O_ACCMODE) == O_WRONLY || (filp->f_flags & O_ACCMODE) == O_RDWR) { - clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags); + clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags); retval = -EROFS; goto out_put_tape; } @@ -1980,12 +1532,15 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) tape->door_locked = DOOR_LOCKED; } } - unlock_kernel(); + mutex_unlock(&idetape_chrdev_mutex); + return 0; out_put_tape: ide_tape_put(tape); - unlock_kernel(); + + mutex_unlock(&idetape_chrdev_mutex); + return retval; } @@ -1994,12 +1549,12 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) idetape_tape_t *tape = drive->driver_data; ide_tape_flush_merge_buffer(drive); - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0); - if (tape->merge_bh != NULL) { + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (tape->buf != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; } idetape_write_filemark(drive); idetape_flush_tape_buffers(drive); @@ -2012,10 +1567,11 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp) ide_drive_t *drive = tape->drive; unsigned int minor = iminor(inode); - lock_kernel(); + mutex_lock(&idetape_chrdev_mutex); + tape = drive->driver_data; - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); if (tape->chrdev_dir == IDETAPE_DIR_WRITE) idetape_write_release(drive, minor); @@ -2024,17 +1580,21 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp) ide_tape_discard_merge_buffer(drive, 1); } - if (minor < 128 && test_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags)) + if (minor < 128 && test_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT), + &drive->atapi_flags)) (void) idetape_rewind_tape(drive); + if (tape->chrdev_dir == IDETAPE_DIR_NONE) { if (tape->door_locked == DOOR_LOCKED) { if (!ide_set_media_lock(drive, tape->disk, 0)) tape->door_locked = DOOR_UNLOCKED; } } - clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags); + clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags); ide_tape_put(tape); - unlock_kernel(); + + mutex_unlock(&idetape_chrdev_mutex); + return 0; } @@ -2042,17 +1602,18 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc pc; + u8 pc_buf[256]; char fw_rev[4], vendor_id[8], product_id[16]; idetape_create_inquiry_cmd(&pc); - if (ide_queue_pc_tail(drive, tape->disk, &pc)) { + if (ide_queue_pc_tail(drive, tape->disk, &pc, pc_buf, pc.req_xfer)) { printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", tape->name); return; } - memcpy(vendor_id, &pc.buf[8], 8); - memcpy(product_id, &pc.buf[16], 16); - memcpy(fw_rev, &pc.buf[32], 4); + memcpy(vendor_id, &pc_buf[8], 8); + memcpy(product_id, &pc_buf[16], 16); + memcpy(fw_rev, &pc_buf[32], 4); ide_fixstring(vendor_id, 8, 0); ide_fixstring(product_id, 16, 0); @@ -2070,11 +1631,11 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc pc; - u8 *caps; + u8 buf[24], *caps; u8 speed, max_speed; idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE); - if (ide_queue_pc_tail(drive, tape->disk, &pc)) { + if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) { printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming" " some default values\n"); tape->blk_size = 512; @@ -2083,7 +1644,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive) put_unaligned(6*52, (u16 *)&tape->caps[16]); return; } - caps = pc.buf + 4 + pc.buf[3]; + caps = buf + 4 + buf[3]; /* convert to host order and save for later use */ speed = be16_to_cpup((__be16 *)&caps[14]); @@ -2149,7 +1710,6 @@ static int divf_buffer_size(ide_drive_t *drive) { return 1024; } ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP); -ide_tape_devset_rw_field(debug_mask, debug_mask); ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq); ide_tape_devset_r_field(avg_speed, avg_speed); @@ -2161,12 +1721,11 @@ static const struct ide_proc_devset idetape_settings[] = { __IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL), __IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer), __IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size), - __IDE_PROC_DEVSET(debug_mask, 0, 0xffff, NULL, NULL), __IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL), __IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL), __IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, mulf_tdsc, divf_tdsc), - { 0 }, + { NULL }, }; #endif @@ -2188,11 +1747,9 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) int buffer_size; u16 *ctl = (u16 *)&tape->caps[12]; - drive->pc_callback = ide_tape_callback; - drive->pc_update_buffers = idetape_update_buffers; - drive->pc_io_buffers = ide_tape_io_buffers; + ide_debug_log(IDE_DBG_FUNC, "minor: %d", minor); - spin_lock_init(&tape->lock); + drive->pc_callback = ide_tape_callback; drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP; @@ -2223,11 +1780,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->buffer_size = *ctl * tape->blk_size; } buffer_size = tape->buffer_size; - tape->pages_per_buffer = buffer_size / PAGE_SIZE; - if (buffer_size % PAGE_SIZE) { - tape->pages_per_buffer++; - tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE; - } /* select the "best" DSC read/write polling freq */ speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]); @@ -2256,19 +1808,21 @@ static void ide_tape_remove(ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; ide_proc_unregister_driver(drive, tape->driver); - + device_del(&tape->dev); ide_unregister_region(tape->disk); - ide_tape_put(tape); + mutex_lock(&idetape_ref_mutex); + put_device(&tape->dev); + mutex_unlock(&idetape_ref_mutex); } -static void ide_tape_release(struct kref *kref) +static void ide_tape_release(struct device *dev) { - struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj); + struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj); ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; - BUG_ON(tape->merge_bh_size); + BUG_ON(tape->valid); drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; drive->driver_data = NULL; @@ -2282,22 +1836,32 @@ static void ide_tape_release(struct kref *kref) } #ifdef CONFIG_IDE_PROC_FS -static int proc_idetape_read_name - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int idetape_name_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = (ide_drive_t *) m->private; idetape_tape_t *tape = drive->driver_data; - char *out = page; - int len; - len = sprintf(out, "%s\n", tape->name); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%s\n", tape->name); + return 0; } +static int idetape_name_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idetape_name_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations idetape_name_proc_fops = { + .owner = THIS_MODULE, + .open = idetape_name_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static ide_proc_entry_t idetape_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL }, - { "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL }, - { NULL, 0, NULL, NULL } + { "capacity", S_IFREG|S_IRUGO, &ide_capacity_proc_fops }, + { "name", S_IFREG|S_IRUGO, &idetape_name_proc_fops }, + {} }; static ide_proc_entry_t *ide_tape_proc_entries(ide_drive_t *drive) @@ -2323,7 +1887,6 @@ static struct ide_driver idetape_driver = { .remove = ide_tape_remove, .version = IDETAPE_VERSION, .do_request = idetape_do_request, - .end_request = idetape_end_request, #ifdef CONFIG_IDE_PROC_FS .proc_entries = ide_tape_proc_entries, .proc_devsets = ide_tape_proc_devsets, @@ -2335,14 +1898,19 @@ static const struct file_operations idetape_fops = { .owner = THIS_MODULE, .read = idetape_chrdev_read, .write = idetape_chrdev_write, - .ioctl = idetape_chrdev_ioctl, + .unlocked_ioctl = idetape_chrdev_ioctl, .open = idetape_chrdev_open, .release = idetape_chrdev_release, + .llseek = noop_llseek, }; static int idetape_open(struct block_device *bdev, fmode_t mode) { - struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk); + struct ide_tape_obj *tape; + + mutex_lock(&ide_tape_mutex); + tape = ide_tape_get(bdev->bd_disk, false, 0); + mutex_unlock(&ide_tape_mutex); if (!tape) return -ENXIO; @@ -2350,12 +1918,13 @@ static int idetape_open(struct block_device *bdev, fmode_t mode) return 0; } -static int idetape_release(struct gendisk *disk, fmode_t mode) +static void idetape_release(struct gendisk *disk, fmode_t mode) { struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj); + mutex_lock(&ide_tape_mutex); ide_tape_put(tape); - return 0; + mutex_unlock(&ide_tape_mutex); } static int idetape_ioctl(struct block_device *bdev, fmode_t mode, @@ -2363,17 +1932,22 @@ static int idetape_ioctl(struct block_device *bdev, fmode_t mode, { struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj); ide_drive_t *drive = tape->drive; - int err = generic_ide_ioctl(drive, bdev, cmd, arg); + int err; + + mutex_lock(&ide_tape_mutex); + err = generic_ide_ioctl(drive, bdev, cmd, arg); if (err == -EINVAL) err = idetape_blkdev_ioctl(drive, cmd, arg); + mutex_unlock(&ide_tape_mutex); + return err; } -static struct block_device_operations idetape_block_ops = { +static const struct block_device_operations idetape_block_ops = { .owner = THIS_MODULE, .open = idetape_open, .release = idetape_release, - .locked_ioctl = idetape_ioctl, + .ioctl = idetape_ioctl, }; static int ide_tape_probe(ide_drive_t *drive) @@ -2382,7 +1956,9 @@ static int ide_tape_probe(ide_drive_t *drive) struct gendisk *g; int minor; - if (!strstr("ide-tape", drive->driver_req)) + ide_debug_log(IDE_DBG_FUNC, "enter"); + + if (!strstr(DRV_NAME, drive->driver_req)) goto failed; if (drive->media != ide_tape) @@ -2407,7 +1983,12 @@ static int ide_tape_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&tape->kref); + tape->dev.parent = &drive->gendev; + tape->dev.release = ide_tape_release; + dev_set_name(&tape->dev, "%s", dev_name(&drive->gendev)); + + if (device_register(&tape->dev)) + goto out_free_disk; tape->drive = drive; tape->driver = &idetape_driver; @@ -2436,6 +2017,8 @@ static int ide_tape_probe(ide_drive_t *drive) return 0; +out_free_disk: + put_disk(g); out_free_tape: kfree(tape); failed: diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 16138bce84a..dabb88b1cbe 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -11,6 +11,7 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/errno.h> @@ -19,108 +20,137 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/scatterlist.h> +#include <linux/uaccess.h> -#include <asm/uaccess.h> #include <asm/io.h> -void ide_tf_dump(const char *s, struct ide_taskfile *tf) +void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + + /* Be sure we're looking at the low order bytes */ + tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); + + tp_ops->tf_read(drive, &cmd->tf, cmd->valid.in.tf); + + if (cmd->tf_flags & IDE_TFLAG_LBA48) { + tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); + + tp_ops->tf_read(drive, &cmd->hob, cmd->valid.in.hob); + } +} + +void ide_tf_dump(const char *s, struct ide_cmd *cmd) { #ifdef DEBUG printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", - s, tf->feature, tf->nsect, tf->lbal, - tf->lbam, tf->lbah, tf->device, tf->command); - printk("%s: hob: nsect 0x%02x lbal 0x%02x " - "lbam 0x%02x lbah 0x%02x\n", - s, tf->hob_nsect, tf->hob_lbal, - tf->hob_lbam, tf->hob_lbah); + s, cmd->tf.feature, cmd->tf.nsect, + cmd->tf.lbal, cmd->tf.lbam, cmd->tf.lbah, + cmd->tf.device, cmd->tf.command); + printk("%s: hob: nsect 0x%02x lbal 0x%02x lbam 0x%02x lbah 0x%02x\n", + s, cmd->hob.nsect, cmd->hob.lbal, cmd->hob.lbam, cmd->hob.lbah); #endif } -int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) +int taskfile_lib_get_identify(ide_drive_t *drive, u8 *buf) { - ide_task_t args; + struct ide_cmd cmd; - memset(&args, 0, sizeof(ide_task_t)); - args.tf.nsect = 0x01; + memset(&cmd, 0, sizeof(cmd)); + cmd.tf.nsect = 0x01; if (drive->media == ide_disk) - args.tf.command = ATA_CMD_ID_ATA; + cmd.tf.command = ATA_CMD_ID_ATA; else - args.tf.command = ATA_CMD_ID_ATAPI; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - args.data_phase = TASKFILE_IN; - return ide_raw_taskfile(drive, &args, buf, 1); + cmd.tf.command = ATA_CMD_ID_ATAPI; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.protocol = ATA_PROT_PIO; + + return ide_raw_taskfile(drive, &cmd, buf, 1); } static ide_startstop_t task_no_data_intr(ide_drive_t *); -static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); -static ide_startstop_t task_in_intr(ide_drive_t *); +static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct ide_cmd *); +static ide_startstop_t task_pio_intr(ide_drive_t *); -ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) +ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd) { ide_hwif_t *hwif = drive->hwif; - struct ide_taskfile *tf = &task->tf; + struct ide_cmd *cmd = &hwif->cmd; + struct ide_taskfile *tf = &cmd->tf; ide_handler_t *handler = NULL; const struct ide_tp_ops *tp_ops = hwif->tp_ops; const struct ide_dma_ops *dma_ops = hwif->dma_ops; - if (task->data_phase == TASKFILE_MULTI_IN || - task->data_phase == TASKFILE_MULTI_OUT) { - if (!drive->mult_count) { - printk(KERN_ERR "%s: multimode not set!\n", - drive->name); - return ide_stopped; - } + if (orig_cmd->protocol == ATA_PROT_PIO && + (orig_cmd->tf_flags & IDE_TFLAG_MULTI_PIO) && + drive->mult_count == 0) { + pr_err("%s: multimode not set!\n", drive->name); + return ide_stopped; } - if (task->tf_flags & IDE_TFLAG_FLAGGED) - task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; + if (orig_cmd->ftf_flags & IDE_FTFLAG_FLAGGED) + orig_cmd->ftf_flags |= IDE_FTFLAG_SET_IN_FLAGS; + + memcpy(cmd, orig_cmd, sizeof(*cmd)); + + if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { + ide_tf_dump(drive->name, cmd); + tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); - memcpy(&hwif->task, task, sizeof(*task)); + if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA) { + u8 data[2] = { cmd->tf.data, cmd->hob.data }; - if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { - ide_tf_dump(drive->name, tf); - tp_ops->set_irq(hwif, 1); - SELECT_MASK(drive, 0); - tp_ops->tf_load(drive, task); + tp_ops->output_data(drive, cmd, data, 2); + } + + if (cmd->valid.out.tf & IDE_VALID_DEVICE) { + u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? + 0xE0 : 0xEF; + + if (!(cmd->ftf_flags & IDE_FTFLAG_FLAGGED)) + cmd->tf.device &= HIHI; + cmd->tf.device |= drive->select; + } + + tp_ops->tf_load(drive, &cmd->hob, cmd->valid.out.hob); + tp_ops->tf_load(drive, &cmd->tf, cmd->valid.out.tf); } - switch (task->data_phase) { - case TASKFILE_MULTI_OUT: - case TASKFILE_OUT: - tp_ops->exec_command(hwif, tf->command); - ndelay(400); /* FIXME */ - return pre_task_out_intr(drive, task->rq); - case TASKFILE_MULTI_IN: - case TASKFILE_IN: - handler = task_in_intr; + switch (cmd->protocol) { + case ATA_PROT_PIO: + if (cmd->tf_flags & IDE_TFLAG_WRITE) { + tp_ops->exec_command(hwif, tf->command); + ndelay(400); /* FIXME */ + return pre_task_out_intr(drive, cmd); + } + handler = task_pio_intr; /* fall-through */ - case TASKFILE_NO_DATA: + case ATA_PROT_NODATA: if (handler == NULL) handler = task_no_data_intr; - ide_execute_command(drive, tf->command, handler, - WAIT_WORSTCASE, NULL); + ide_execute_command(drive, cmd, handler, WAIT_WORSTCASE); return ide_started; - default: - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 || - dma_ops->dma_setup(drive)) + case ATA_PROT_DMA: + if (ide_dma_prepare(drive, cmd)) return ide_stopped; - dma_ops->dma_exec_cmd(drive, tf->command); + hwif->expiry = dma_ops->dma_timer_expiry; + ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD); dma_ops->dma_start(drive); + default: return ide_started; } } EXPORT_SYMBOL_GPL(do_rw_taskfile); -/* - * Handler for commands without a data phase - */ static ide_startstop_t task_no_data_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - ide_task_t *task = &hwif->task; - struct ide_taskfile *tf = &task->tf; - int custom = (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) ? 1 : 0; + struct ide_cmd *cmd = &hwif->cmd; + struct ide_taskfile *tf = &cmd->tf; + int custom = (cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) ? 1 : 0; int retries = (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) ? 5 : 1; u8 stat; @@ -136,34 +166,32 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive) if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) { if (custom && tf->command == ATA_CMD_SET_MULTI) { drive->mult_req = drive->mult_count = 0; - drive->special.b.recalibrate = 1; + drive->special_flags |= IDE_SFLAG_RECALIBRATE; (void)ide_dump_status(drive, __func__, stat); return ide_stopped; } else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) { if ((stat & (ATA_ERR | ATA_DRQ)) == 0) { ide_set_handler(drive, &task_no_data_intr, - WAIT_WORSTCASE, NULL); + WAIT_WORSTCASE); return ide_started; } } return ide_error(drive, "task_no_data_intr", stat); - /* calls ide_end_drive_cmd */ } - if (!custom) - ide_end_drive_cmd(drive, stat, ide_read_error(drive)); - else if (tf->command == ATA_CMD_IDLEIMMEDIATE) { - hwif->tp_ops->tf_read(drive, task); - if (tf->lbal != 0xc4) { - printk(KERN_ERR "%s: head unload failed!\n", - drive->name); - ide_tf_dump(drive->name, tf); - } else - drive->dev_flags |= IDE_DFLAG_PARKED; - ide_end_drive_cmd(drive, stat, ide_read_error(drive)); - } else if (tf->command == ATA_CMD_SET_MULTI) + if (custom && tf->command == ATA_CMD_SET_MULTI) drive->mult_count = drive->mult_req; + if (custom == 0 || tf->command == ATA_CMD_IDLEIMMEDIATE || + tf->command == ATA_CMD_CHK_POWER) { + struct request *rq = hwif->rq; + + if (blk_pm_request(rq)) + ide_complete_pm_rq(drive, rq); + else + ide_finish_cmd(drive, cmd, stat); + } + return ide_stopped; } @@ -174,7 +202,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) u8 stat; /* - * Last sector was transfered, wait until device is ready. This can + * Last sector was transferred, wait until device is ready. This can * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ for (retries = 0; retries < 1000; retries++) { @@ -187,244 +215,200 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) } if (stat & ATA_BUSY) - printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); + pr_err("%s: drive still BUSY!\n", drive->name); return stat; } -static void ide_pio_sector(ide_drive_t *drive, struct request *rq, - unsigned int write) +void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, + unsigned int write, unsigned int len) { ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; - struct scatterlist *cursg = hwif->cursg; + struct scatterlist *cursg = cmd->cursg; + unsigned long uninitialized_var(flags); struct page *page; -#ifdef CONFIG_HIGHMEM - unsigned long flags; -#endif unsigned int offset; u8 *buf; - cursg = hwif->cursg; - if (!cursg) { - cursg = sg; - hwif->cursg = sg; - } + cursg = cmd->cursg; + if (cursg == NULL) + cursg = cmd->cursg = sg; - page = sg_page(cursg); - offset = cursg->offset + hwif->cursg_ofs * SECTOR_SIZE; + while (len) { + unsigned nr_bytes = min(len, cursg->length - cmd->cursg_ofs); + int page_is_high; - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; + page = sg_page(cursg); + offset = cursg->offset + cmd->cursg_ofs; -#ifdef CONFIG_HIGHMEM - local_irq_save(flags); -#endif - buf = kmap_atomic(page, KM_BIO_SRC_IRQ) + offset; + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; - hwif->nleft--; - hwif->cursg_ofs++; + nr_bytes = min_t(unsigned, nr_bytes, (PAGE_SIZE - offset)); - if ((hwif->cursg_ofs * SECTOR_SIZE) == cursg->length) { - hwif->cursg = sg_next(hwif->cursg); - hwif->cursg_ofs = 0; - } + page_is_high = PageHighMem(page); + if (page_is_high) + local_irq_save(flags); - /* do the actual data transfer */ - if (write) - hwif->tp_ops->output_data(drive, rq, buf, SECTOR_SIZE); - else - hwif->tp_ops->input_data(drive, rq, buf, SECTOR_SIZE); + buf = kmap_atomic(page) + offset; - kunmap_atomic(buf, KM_BIO_SRC_IRQ); -#ifdef CONFIG_HIGHMEM - local_irq_restore(flags); -#endif -} + cmd->nleft -= nr_bytes; + cmd->cursg_ofs += nr_bytes; -static void ide_pio_multi(ide_drive_t *drive, struct request *rq, - unsigned int write) -{ - unsigned int nsect; + if (cmd->cursg_ofs == cursg->length) { + cursg = cmd->cursg = sg_next(cmd->cursg); + cmd->cursg_ofs = 0; + } + + /* do the actual data transfer */ + if (write) + hwif->tp_ops->output_data(drive, cmd, buf, nr_bytes); + else + hwif->tp_ops->input_data(drive, cmd, buf, nr_bytes); + + kunmap_atomic(buf); - nsect = min_t(unsigned int, drive->hwif->nleft, drive->mult_count); - while (nsect--) - ide_pio_sector(drive, rq, write); + if (page_is_high) + local_irq_restore(flags); + + len -= nr_bytes; + } } +EXPORT_SYMBOL_GPL(ide_pio_bytes); -static void ide_pio_datablock(ide_drive_t *drive, struct request *rq, - unsigned int write) +static void ide_pio_datablock(ide_drive_t *drive, struct ide_cmd *cmd, + unsigned int write) { + unsigned int nr_bytes; + u8 saved_io_32bit = drive->io_32bit; - if (rq->bio) /* fs request */ - rq->errors = 0; + if (cmd->tf_flags & IDE_TFLAG_FS) + cmd->rq->errors = 0; - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - ide_task_t *task = rq->special; - - if (task->tf_flags & IDE_TFLAG_IO_16BIT) - drive->io_32bit = 0; - } + if (cmd->tf_flags & IDE_TFLAG_IO_16BIT) + drive->io_32bit = 0; touch_softlockup_watchdog(); - switch (drive->hwif->data_phase) { - case TASKFILE_MULTI_IN: - case TASKFILE_MULTI_OUT: - ide_pio_multi(drive, rq, write); - break; - default: - ide_pio_sector(drive, rq, write); - break; - } + if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) + nr_bytes = min_t(unsigned, cmd->nleft, drive->mult_count << 9); + else + nr_bytes = SECTOR_SIZE; + + ide_pio_bytes(drive, cmd, write, nr_bytes); drive->io_32bit = saved_io_32bit; } -static ide_startstop_t task_error(ide_drive_t *drive, struct request *rq, - const char *s, u8 stat) +static void ide_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd) { - if (rq->bio) { - ide_hwif_t *hwif = drive->hwif; - int sectors = hwif->nsect - hwif->nleft; - - switch (hwif->data_phase) { - case TASKFILE_IN: - if (hwif->nleft) - break; - /* fall through */ - case TASKFILE_OUT: - sectors--; - break; - case TASKFILE_MULTI_IN: - if (hwif->nleft) - break; - /* fall through */ - case TASKFILE_MULTI_OUT: - sectors -= drive->mult_count; - default: - break; + if (cmd->tf_flags & IDE_TFLAG_FS) { + int nr_bytes = cmd->nbytes - cmd->nleft; + + if (cmd->protocol == ATA_PROT_PIO && + ((cmd->tf_flags & IDE_TFLAG_WRITE) || cmd->nleft == 0)) { + if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) + nr_bytes -= drive->mult_count << 9; + else + nr_bytes -= SECTOR_SIZE; } - if (sectors > 0) { - struct ide_driver *drv; - - drv = *(struct ide_driver **)rq->rq_disk->private_data; - drv->end_request(drive, 1, sectors); - } + if (nr_bytes > 0) + ide_complete_rq(drive, 0, nr_bytes); } - return ide_error(drive, s, stat); } -void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) +void ide_finish_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat) { - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - u8 err = ide_read_error(drive); + struct request *rq = drive->hwif->rq; + u8 err = ide_read_error(drive), nsect = cmd->tf.nsect; + u8 set_xfer = !!(cmd->tf_flags & IDE_TFLAG_SET_XFER); - ide_end_drive_cmd(drive, stat, err); - return; - } - - if (rq->rq_disk) { - struct ide_driver *drv; - - drv = *(struct ide_driver **)rq->rq_disk->private_data;; - drv->end_request(drive, 1, rq->nr_sectors); - } else - ide_end_request(drive, 1, rq->nr_sectors); -} + ide_complete_cmd(drive, cmd, stat, err); + rq->errors = err; -/* - * We got an interrupt on a task_in case, but no errors and no DRQ. - * - * It might be a spurious irq (shared irq), but it might be a - * command that had no output. - */ -static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat) -{ - /* Command all done? */ - if (OK_STAT(stat, ATA_DRDY, ATA_BUSY)) { - task_end_request(drive, rq, stat); - return ide_stopped; + if (err == 0 && set_xfer) { + ide_set_xfer_rate(drive, nsect); + ide_driveid_update(drive); } - /* Assume it was a spurious irq */ - ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); - return ide_started; + ide_complete_rq(drive, err ? -EIO : 0, blk_rq_bytes(rq)); } /* - * Handler for command with PIO data-in phase (Read/Read Multiple). + * Handler for command with PIO data phase. */ -static ide_startstop_t task_in_intr(ide_drive_t *drive) +static ide_startstop_t task_pio_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->rq; + struct ide_cmd *cmd = &drive->hwif->cmd; u8 stat = hwif->tp_ops->read_status(hwif); + u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE); - /* Error? */ - if (stat & ATA_ERR) - return task_error(drive, rq, __func__, stat); + if (write == 0) { + /* Error? */ + if (stat & ATA_ERR) + goto out_err; - /* Didn't want any data? Odd. */ - if ((stat & ATA_DRQ) == 0) - return task_in_unexpected(drive, rq, stat); + /* Didn't want any data? Odd. */ + if ((stat & ATA_DRQ) == 0) { + /* Command all done? */ + if (OK_STAT(stat, ATA_DRDY, ATA_BUSY)) + goto out_end; - ide_pio_datablock(drive, rq, 0); + /* Assume it was a spurious irq */ + goto out_wait; + } + } else { + if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) + goto out_err; - /* Are we done? Check status and finish transfer. */ - if (!hwif->nleft) { - stat = wait_drive_not_busy(drive); - if (!OK_STAT(stat, 0, BAD_STAT)) - return task_error(drive, rq, __func__, stat); - task_end_request(drive, rq, stat); - return ide_stopped; + /* Deal with unexpected ATA data phase. */ + if (((stat & ATA_DRQ) == 0) ^ (cmd->nleft == 0)) + goto out_err; } - /* Still data left to transfer. */ - ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); + if (write && cmd->nleft == 0) + goto out_end; - return ide_started; -} - -/* - * Handler for command with PIO data-out phase (Write/Write Multiple). - */ -static ide_startstop_t task_out_intr (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->rq; - u8 stat = hwif->tp_ops->read_status(hwif); - - if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) - return task_error(drive, rq, __func__, stat); + /* Still data left to transfer. */ + ide_pio_datablock(drive, cmd, write); - /* Deal with unexpected ATA data phase. */ - if (((stat & ATA_DRQ) == 0) ^ !hwif->nleft) - return task_error(drive, rq, __func__, stat); + /* Are we done? Check status and finish transfer. */ + if (write == 0 && cmd->nleft == 0) { + stat = wait_drive_not_busy(drive); + if (!OK_STAT(stat, 0, BAD_STAT)) + goto out_err; - if (!hwif->nleft) { - task_end_request(drive, rq, stat); - return ide_stopped; + goto out_end; } - +out_wait: /* Still data left to transfer. */ - ide_pio_datablock(drive, rq, 1); - ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); - + ide_set_handler(drive, &task_pio_intr, WAIT_WORSTCASE); return ide_started; +out_end: + if ((cmd->tf_flags & IDE_TFLAG_FS) == 0) + ide_finish_cmd(drive, cmd, stat); + else + ide_complete_rq(drive, 0, blk_rq_sectors(cmd->rq) << 9); + return ide_stopped; +out_err: + ide_error_cmd(drive, cmd); + return ide_error(drive, __func__, stat); } -static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) +static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, + struct ide_cmd *cmd) { ide_startstop_t startstop; if (ide_wait_stat(&startstop, drive, ATA_DRQ, drive->bad_wstat, WAIT_DRQ)) { - printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n", - drive->name, drive->hwif->data_phase ? "MULT" : "", + pr_err("%s: no DRQ after issuing %sWRITE%s\n", drive->name, + (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) ? "MULT" : "", (drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : ""); return startstop; } @@ -432,20 +416,22 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) if ((drive->dev_flags & IDE_DFLAG_UNMASK) == 0) local_irq_disable(); - ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); - ide_pio_datablock(drive, rq, 1); + ide_set_handler(drive, &task_pio_intr, WAIT_WORSTCASE); + + ide_pio_datablock(drive, cmd, 1); return ide_started; } -int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) +int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, + u16 nsect) { struct request *rq; int error; + int rw = !(cmd->tf_flags & IDE_TFLAG_WRITE) ? READ : WRITE; - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq = blk_get_request(drive->queue, rw, __GFP_WAIT); rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->buffer = buf; /* * (ks) We transfer currently only whole sectors. @@ -453,36 +439,37 @@ int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - rq->hard_nr_sectors = rq->nr_sectors = nsect; - rq->hard_cur_sectors = rq->current_nr_sectors = nsect; - - if (task->tf_flags & IDE_TFLAG_WRITE) - rq->cmd_flags |= REQ_RW; + if (nsect) { + error = blk_rq_map_kern(drive->queue, rq, buf, + nsect * SECTOR_SIZE, __GFP_WAIT); + if (error) + goto put_req; + } - rq->special = task; - task->rq = rq; + rq->special = cmd; + cmd->rq = rq; error = blk_execute_rq(drive->queue, NULL, rq, 0); - blk_put_request(rq); +put_req: + blk_put_request(rq); return error; } - EXPORT_SYMBOL(ide_raw_taskfile); -int ide_no_data_taskfile(ide_drive_t *drive, ide_task_t *task) +int ide_no_data_taskfile(ide_drive_t *drive, struct ide_cmd *cmd) { - task->data_phase = TASKFILE_NO_DATA; + cmd->protocol = ATA_PROT_NODATA; - return ide_raw_taskfile(drive, task, NULL, 0); + return ide_raw_taskfile(drive, cmd, NULL, 0); } EXPORT_SYMBOL_GPL(ide_no_data_taskfile); #ifdef CONFIG_IDE_TASK_IOCTL -int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) +int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) { ide_task_request_t *req_task; - ide_task_t args; + struct ide_cmd cmd; u8 *outbuf = NULL; u8 *inbuf = NULL; u8 *data_buf = NULL; @@ -493,18 +480,13 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) u16 nsect = 0; char __user *buf = (char __user *)arg; -// printk("IDE Taskfile ...\n"); - - req_task = kzalloc(tasksize, GFP_KERNEL); - if (req_task == NULL) return -ENOMEM; - if (copy_from_user(req_task, buf, tasksize)) { - kfree(req_task); - return -EFAULT; - } + req_task = memdup_user(buf, tasksize); + if (IS_ERR(req_task)) + return PTR_ERR(req_task); taskout = req_task->out_size; taskin = req_task->in_size; - + if (taskin > 65536 || taskout > 65536) { err = -EINVAL; goto abort; @@ -536,116 +518,128 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) } } - memset(&args, 0, sizeof(ide_task_t)); + memset(&cmd, 0, sizeof(cmd)); - memcpy(&args.tf_array[0], req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); - memcpy(&args.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); + memcpy(&cmd.hob, req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(&cmd.tf, req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); - args.data_phase = req_task->data_phase; + cmd.valid.out.tf = IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_DEVICE | IDE_VALID_IN_TF; + cmd.tf_flags = IDE_TFLAG_IO_16BIT; - args.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE | - IDE_TFLAG_IN_TF; - if (drive->dev_flags & IDE_DFLAG_LBA48) - args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB); + if (drive->dev_flags & IDE_DFLAG_LBA48) { + cmd.tf_flags |= IDE_TFLAG_LBA48; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + } if (req_task->out_flags.all) { - args.tf_flags |= IDE_TFLAG_FLAGGED; + cmd.ftf_flags |= IDE_FTFLAG_FLAGGED; if (req_task->out_flags.b.data) - args.tf_flags |= IDE_TFLAG_OUT_DATA; + cmd.ftf_flags |= IDE_FTFLAG_OUT_DATA; if (req_task->out_flags.b.nsector_hob) - args.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT; + cmd.valid.out.hob |= IDE_VALID_NSECT; if (req_task->out_flags.b.sector_hob) - args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL; + cmd.valid.out.hob |= IDE_VALID_LBAL; if (req_task->out_flags.b.lcyl_hob) - args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM; + cmd.valid.out.hob |= IDE_VALID_LBAM; if (req_task->out_flags.b.hcyl_hob) - args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH; + cmd.valid.out.hob |= IDE_VALID_LBAH; if (req_task->out_flags.b.error_feature) - args.tf_flags |= IDE_TFLAG_OUT_FEATURE; + cmd.valid.out.tf |= IDE_VALID_FEATURE; if (req_task->out_flags.b.nsector) - args.tf_flags |= IDE_TFLAG_OUT_NSECT; + cmd.valid.out.tf |= IDE_VALID_NSECT; if (req_task->out_flags.b.sector) - args.tf_flags |= IDE_TFLAG_OUT_LBAL; + cmd.valid.out.tf |= IDE_VALID_LBAL; if (req_task->out_flags.b.lcyl) - args.tf_flags |= IDE_TFLAG_OUT_LBAM; + cmd.valid.out.tf |= IDE_VALID_LBAM; if (req_task->out_flags.b.hcyl) - args.tf_flags |= IDE_TFLAG_OUT_LBAH; + cmd.valid.out.tf |= IDE_VALID_LBAH; } else { - args.tf_flags |= IDE_TFLAG_OUT_TF; - if (args.tf_flags & IDE_TFLAG_LBA48) - args.tf_flags |= IDE_TFLAG_OUT_HOB; + cmd.valid.out.tf |= IDE_VALID_OUT_TF; + if (cmd.tf_flags & IDE_TFLAG_LBA48) + cmd.valid.out.hob |= IDE_VALID_OUT_HOB; } if (req_task->in_flags.b.data) - args.tf_flags |= IDE_TFLAG_IN_DATA; - - switch(req_task->data_phase) { - case TASKFILE_MULTI_OUT: - if (!drive->mult_count) { - /* (hs): give up if multcount is not set */ - printk(KERN_ERR "%s: %s Multimode Write " \ - "multcount is not set\n", - drive->name, __func__); - err = -EPERM; - goto abort; - } - /* fall through */ - case TASKFILE_OUT: - /* fall through */ - case TASKFILE_OUT_DMAQ: - case TASKFILE_OUT_DMA: - nsect = taskout / SECTOR_SIZE; - data_buf = outbuf; - break; - case TASKFILE_MULTI_IN: - if (!drive->mult_count) { - /* (hs): give up if multcount is not set */ - printk(KERN_ERR "%s: %s Multimode Read failure " \ - "multcount is not set\n", - drive->name, __func__); - err = -EPERM; - goto abort; - } - /* fall through */ - case TASKFILE_IN: - /* fall through */ - case TASKFILE_IN_DMAQ: - case TASKFILE_IN_DMA: - nsect = taskin / SECTOR_SIZE; - data_buf = inbuf; - break; - case TASKFILE_NO_DATA: - break; - default: - err = -EFAULT; + cmd.ftf_flags |= IDE_FTFLAG_IN_DATA; + + if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) { + /* fixup data phase if needed */ + if (req_task->data_phase == TASKFILE_IN_DMAQ || + req_task->data_phase == TASKFILE_IN_DMA) + cmd.tf_flags |= IDE_TFLAG_WRITE; + } + + cmd.protocol = ATA_PROT_DMA; + + switch (req_task->data_phase) { + case TASKFILE_MULTI_OUT: + if (!drive->mult_count) { + /* (hs): give up if multcount is not set */ + pr_err("%s: %s Multimode Write multcount is not set\n", + drive->name, __func__); + err = -EPERM; goto abort; + } + cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; + /* fall through */ + case TASKFILE_OUT: + cmd.protocol = ATA_PROT_PIO; + /* fall through */ + case TASKFILE_OUT_DMAQ: + case TASKFILE_OUT_DMA: + cmd.tf_flags |= IDE_TFLAG_WRITE; + nsect = taskout / SECTOR_SIZE; + data_buf = outbuf; + break; + case TASKFILE_MULTI_IN: + if (!drive->mult_count) { + /* (hs): give up if multcount is not set */ + pr_err("%s: %s Multimode Read multcount is not set\n", + drive->name, __func__); + err = -EPERM; + goto abort; + } + cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; + /* fall through */ + case TASKFILE_IN: + cmd.protocol = ATA_PROT_PIO; + /* fall through */ + case TASKFILE_IN_DMAQ: + case TASKFILE_IN_DMA: + nsect = taskin / SECTOR_SIZE; + data_buf = inbuf; + break; + case TASKFILE_NO_DATA: + cmd.protocol = ATA_PROT_NODATA; + break; + default: + err = -EFAULT; + goto abort; } if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) nsect = 0; else if (!nsect) { - nsect = (args.tf.hob_nsect << 8) | args.tf.nsect; + nsect = (cmd.hob.nsect << 8) | cmd.tf.nsect; if (!nsect) { - printk(KERN_ERR "%s: in/out command without data\n", + pr_err("%s: in/out command without data\n", drive->name); err = -EFAULT; goto abort; } } - if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) - args.tf_flags |= IDE_TFLAG_WRITE; + err = ide_raw_taskfile(drive, &cmd, data_buf, nsect); - err = ide_raw_taskfile(drive, &args, data_buf, nsect); + memcpy(req_task->hob_ports, &cmd.hob, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(req_task->io_ports, &cmd.tf, HDIO_DRIVE_TASK_HDR_SIZE); - memcpy(req_task->hob_ports, &args.tf_array[0], HDIO_DRIVE_HOB_HDR_SIZE - 2); - memcpy(req_task->io_ports, &args.tf_array[6], HDIO_DRIVE_TASK_HDR_SIZE); - - if ((args.tf_flags & IDE_TFLAG_FLAGGED_SET_IN_FLAGS) && + if ((cmd.ftf_flags & IDE_FTFLAG_SET_IN_FLAGS) && req_task->in_flags.all == 0) { req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; if (drive->dev_flags & IDE_DFLAG_LBA48) @@ -675,8 +669,6 @@ abort: kfree(outbuf); kfree(inbuf); -// printk("IDE Taskfile ioctl ended. rc = %i\n", err); - return err; } #endif diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c index 81f527af8fa..0e05f75934c 100644 --- a/drivers/ide/ide-timings.c +++ b/drivers/ide/ide-timings.c @@ -43,6 +43,8 @@ static struct ide_timing ide_timing[] = { { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, + { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 }, { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, @@ -51,7 +53,8 @@ static struct ide_timing ide_timing[] = { { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, + { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, + { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, @@ -90,6 +93,10 @@ u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio) /* conservative "downgrade" for all pre-ATA2 drives */ if (pio < 3 && cycle < t->cycle) cycle = 0; /* use standard timing */ + + /* Use the standard timing for the CF specific modes too */ + if (pio > 4 && ata_id_is_cfa(id)) + cycle = 0; } return cycle ? cycle : t->cycle; @@ -159,11 +166,13 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed, if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); - if (speed <= XFER_PIO_2) - p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; - else if (speed <= XFER_PIO_5) - p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; - else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; + else if ((speed <= XFER_PIO_4) || + (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; + } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) p.cycle = id[ATA_ID_EIDE_DMA_MIN]; ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); @@ -177,11 +186,10 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed, /* * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, * S.M.A.R.T and some other commands. We have to ensure that the - * DMA cycle timing is slower/equal than the fastest PIO timing. + * DMA cycle timing is slower/equal than the current PIO timing. */ if (speed >= XFER_SW_DMA_0) { - u8 pio = ide_get_best_pio_mode(drive, 255, 5); - ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); + ide_timing_compute(drive, drive->pio_mode, &p, T, UT); ide_timing_merge(&p, t, t, IDE_TIMING_ALL); } diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c new file mode 100644 index 00000000000..eb421883c16 --- /dev/null +++ b/drivers/ide/ide-xfer-mode.c @@ -0,0 +1,266 @@ +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/interrupt.h> +#include <linux/ide.h> +#include <linux/bitops.h> + +static const char *udma_str[] = + { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", + "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; +static const char *mwdma_str[] = + { "MWDMA0", "MWDMA1", "MWDMA2", "MWDMA3", "MWDMA4" }; +static const char *swdma_str[] = + { "SWDMA0", "SWDMA1", "SWDMA2" }; +static const char *pio_str[] = + { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5", "PIO6" }; + +/** + * ide_xfer_verbose - return IDE mode names + * @mode: transfer mode + * + * Returns a constant string giving the name of the mode + * requested. + */ + +const char *ide_xfer_verbose(u8 mode) +{ + const char *s; + u8 i = mode & 0xf; + + if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) + s = udma_str[i]; + else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_4) + s = mwdma_str[i]; + else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) + s = swdma_str[i]; + else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_6) + s = pio_str[i & 0x7]; + else if (mode == XFER_PIO_SLOW) + s = "PIO SLOW"; + else + s = "XFER ERROR"; + + return s; +} +EXPORT_SYMBOL(ide_xfer_verbose); + +/** + * ide_get_best_pio_mode - get PIO mode from drive + * @drive: drive to consider + * @mode_wanted: preferred mode + * @max_mode: highest allowed mode + * + * This routine returns the recommended PIO settings for a given drive, + * based on the drive->id information and the ide_pio_blacklist[]. + * + * Drive PIO mode is auto-selected if 255 is passed as mode_wanted. + * This is used by most chipset support modules when "auto-tuning". + */ + +static u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) +{ + u16 *id = drive->id; + int pio_mode = -1, overridden = 0; + + if (mode_wanted != 255) + return min_t(u8, mode_wanted, max_mode); + + if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0) + pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]); + + if (pio_mode != -1) { + printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); + } else { + pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8; + if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ + pio_mode = 2; + overridden = 1; + } + + if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */ + if (ata_id_is_cfa(id) && (id[ATA_ID_CFA_MODES] & 7)) + pio_mode = 4 + min_t(int, 2, + id[ATA_ID_CFA_MODES] & 7); + else if (ata_id_has_iordy(id)) { + if (id[ATA_ID_PIO_MODES] & 7) { + overridden = 0; + if (id[ATA_ID_PIO_MODES] & 4) + pio_mode = 5; + else if (id[ATA_ID_PIO_MODES] & 2) + pio_mode = 4; + else + pio_mode = 3; + } + } + } + + if (overridden) + printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", + drive->name); + } + + if (pio_mode > max_mode) + pio_mode = max_mode; + + return pio_mode; +} + +int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio) +{ + /* + * IORDY may lead to controller lock up on certain controllers + * if the port is not occupied. + */ + if (pio == 0 && (drive->hwif->port_flags & IDE_PFLAG_PROBING)) + return 0; + return ata_id_pio_need_iordy(drive->id, pio); +} +EXPORT_SYMBOL_GPL(ide_pio_need_iordy); + +int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; + + if (port_ops == NULL || port_ops->set_pio_mode == NULL) + return -1; + + /* + * TODO: temporary hack for some legacy host drivers that didn't + * set transfer mode on the device in ->set_pio_mode method... + */ + if (port_ops->set_dma_mode == NULL) { + drive->pio_mode = mode; + port_ops->set_pio_mode(hwif, drive); + return 0; + } + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + drive->pio_mode = mode; + port_ops->set_pio_mode(hwif, drive); + return 0; + } else { + drive->pio_mode = mode; + port_ops->set_pio_mode(hwif, drive); + return ide_config_drive_speed(drive, mode); + } +} + +int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; + + if (port_ops == NULL || port_ops->set_dma_mode == NULL) + return -1; + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + drive->dma_mode = mode; + port_ops->set_dma_mode(hwif, drive); + return 0; + } else { + drive->dma_mode = mode; + port_ops->set_dma_mode(hwif, drive); + return ide_config_drive_speed(drive, mode); + } +} +EXPORT_SYMBOL_GPL(ide_set_dma_mode); + +/* req_pio == "255" for auto-tune */ +void ide_set_pio(ide_drive_t *drive, u8 req_pio) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + u8 host_pio, pio; + + if (port_ops == NULL || port_ops->set_pio_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) + return; + + BUG_ON(hwif->pio_mask == 0x00); + + host_pio = fls(hwif->pio_mask) - 1; + + pio = ide_get_best_pio_mode(drive, req_pio, host_pio); + + /* + * TODO: + * - report device max PIO mode + * - check req_pio != 255 against device max PIO mode + */ + printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", + drive->name, host_pio, req_pio, + req_pio == 255 ? "(auto-tune)" : "", pio); + + (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); +} +EXPORT_SYMBOL_GPL(ide_set_pio); + +/** + * ide_rate_filter - filter transfer mode + * @drive: IDE device + * @speed: desired speed + * + * Given the available transfer modes this function returns + * the best available speed at or below the speed requested. + * + * TODO: check device PIO capabilities + */ + +static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) +{ + ide_hwif_t *hwif = drive->hwif; + u8 mode = ide_find_dma_mode(drive, speed); + + if (mode == 0) { + if (hwif->pio_mask) + mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; + else + mode = XFER_PIO_4; + } + +/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */ + + return min(speed, mode); +} + +/** + * ide_set_xfer_rate - set transfer rate + * @drive: drive to set + * @rate: speed to attempt to set + * + * General helper for setting the speed of an IDE device. This + * function knows about user enforced limits from the configuration + * which ->set_pio_mode/->set_dma_mode does not. + */ + +int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (port_ops == NULL || port_ops->set_dma_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) + return -1; + + rate = ide_rate_filter(drive, rate); + + BUG_ON(rate < XFER_PIO_0); + + if (rate >= XFER_PIO_0 && rate <= XFER_PIO_6) + return ide_set_pio_mode(drive, rate); + + return ide_set_dma_mode(drive, rate); +} diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 258805da15c..2ce6268a273 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -52,7 +52,6 @@ #include <linux/major.h> #include <linux/errno.h> #include <linux/genhd.h> -#include <linux/slab.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/ide.h> @@ -62,160 +61,6 @@ struct class *ide_port_class; -/* - * Locks for IDE setting functionality - */ - -DEFINE_MUTEX(ide_setting_mtx); - -ide_devset_get(io_32bit, io_32bit); - -static int set_io_32bit(ide_drive_t *drive, int arg) -{ - if (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) - return -EPERM; - - if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1)) - return -EINVAL; - - drive->io_32bit = arg; - - return 0; -} - -ide_devset_get_flag(ksettings, IDE_DFLAG_KEEP_SETTINGS); - -static int set_ksettings(ide_drive_t *drive, int arg) -{ - if (arg < 0 || arg > 1) - return -EINVAL; - - if (arg) - drive->dev_flags |= IDE_DFLAG_KEEP_SETTINGS; - else - drive->dev_flags &= ~IDE_DFLAG_KEEP_SETTINGS; - - return 0; -} - -ide_devset_get_flag(using_dma, IDE_DFLAG_USING_DMA); - -static int set_using_dma(ide_drive_t *drive, int arg) -{ -#ifdef CONFIG_BLK_DEV_IDEDMA - int err = -EPERM; - - if (arg < 0 || arg > 1) - return -EINVAL; - - if (ata_id_has_dma(drive->id) == 0) - goto out; - - if (drive->hwif->dma_ops == NULL) - goto out; - - err = 0; - - if (arg) { - if (ide_set_dma(drive)) - err = -EIO; - } else - ide_dma_off(drive); - -out: - return err; -#else - if (arg < 0 || arg > 1) - return -EINVAL; - - return -EPERM; -#endif -} - -/* - * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away - */ -static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio) -{ - switch (req_pio) { - case 202: - case 201: - case 200: - case 102: - case 101: - case 100: - return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0; - case 9: - case 8: - return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0; - case 7: - case 6: - return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0; - default: - return 0; - } -} - -static int set_pio_mode(ide_drive_t *drive, int arg) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (arg < 0 || arg > 255) - return -EINVAL; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return -ENOSYS; - - if (set_pio_mode_abuse(drive->hwif, arg)) { - if (arg == 8 || arg == 9) { - unsigned long flags; - - /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */ - spin_lock_irqsave(&hwif->lock, flags); - port_ops->set_pio_mode(drive, arg); - spin_unlock_irqrestore(&hwif->lock, flags); - } else - port_ops->set_pio_mode(drive, arg); - } else { - int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); - - ide_set_pio(drive, arg); - - if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) { - if (keep_dma) - ide_dma_on(drive); - } - } - - return 0; -} - -ide_devset_get_flag(unmaskirq, IDE_DFLAG_UNMASK); - -static int set_unmaskirq(ide_drive_t *drive, int arg) -{ - if (drive->dev_flags & IDE_DFLAG_NO_UNMASK) - return -EPERM; - - if (arg < 0 || arg > 1) - return -EINVAL; - - if (arg) - drive->dev_flags |= IDE_DFLAG_UNMASK; - else - drive->dev_flags &= ~IDE_DFLAG_UNMASK; - - return 0; -} - -ide_ext_devset_rw_sync(io_32bit, io_32bit); -ide_ext_devset_rw_sync(keepsettings, ksettings); -ide_ext_devset_rw_sync(unmaskirq, unmaskirq); -ide_ext_devset_rw_sync(using_dma, using_dma); -__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode); - /** * ide_device_get - get an additional reference to a ide_drive_t * @drive: device to get a reference to @@ -313,7 +158,7 @@ struct bus_type ide_bus_type = { .probe = generic_ide_probe, .remove = generic_ide_remove, .shutdown = generic_ide_shutdown, - .dev_attrs = ide_dev_attrs, + .dev_groups = ide_dev_groups, .suspend = generic_ide_suspend, .resume = generic_ide_resume, }; @@ -332,11 +177,12 @@ EXPORT_SYMBOL_GPL(ide_pci_clk); module_param_named(pci_clock, ide_pci_clk, int, 0); MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)"); -static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) +static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp) { int a, b, i, j = 1; unsigned int *dev_param_mask = (unsigned int *)kp->arg; + /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */ if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 && sscanf(s, "%d.%d", &a, &b) != 2) return -EINVAL; @@ -349,34 +195,45 @@ static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) if (j) *dev_param_mask |= (1 << i); else - *dev_param_mask &= (1 << i); + *dev_param_mask &= ~(1 << i); return 0; } +static struct kernel_param_ops param_ops_ide_dev_mask = { + .set = ide_set_dev_param_mask +}; + +#define param_check_ide_dev_mask(name, p) param_check_uint(name, p) + static unsigned int ide_nodma; -module_param_call(nodma, ide_set_dev_param_mask, NULL, &ide_nodma, 0); +module_param_named(nodma, ide_nodma, ide_dev_mask, 0); MODULE_PARM_DESC(nodma, "disallow DMA for a device"); static unsigned int ide_noflush; -module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0); +module_param_named(noflush, ide_noflush, ide_dev_mask, 0); MODULE_PARM_DESC(noflush, "disable flush requests for a device"); +static unsigned int ide_nohpa; + +module_param_named(nohpa, ide_nohpa, ide_dev_mask, 0); +MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device"); + static unsigned int ide_noprobe; -module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0); +module_param_named(noprobe, ide_noprobe, ide_dev_mask, 0); MODULE_PARM_DESC(noprobe, "skip probing for a device"); static unsigned int ide_nowerr; -module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0); +module_param_named(nowerr, ide_nowerr, ide_dev_mask, 0); MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device"); static unsigned int ide_cdroms; -module_param_call(cdrom, ide_set_dev_param_mask, NULL, &ide_cdroms, 0); +module_param_named(cdrom, ide_cdroms, ide_dev_mask, 0); MODULE_PARM_DESC(cdrom, "force device as a CD-ROM"); struct chs_geom { @@ -392,6 +249,8 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp) { int a, b, c = 0, h = 0, s = 0, i, j = 1; + /* controller . device (0 or 1) : Cylinders , Heads , Sectors */ + /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */ if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 && sscanf(str, "%d.%d:%d", &a, &b, &j) != 3) return -EINVAL; @@ -407,7 +266,7 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp) if (j) ide_disks |= (1 << i); else - ide_disks &= (1 << i); + ide_disks &= ~(1 << i); ide_disks_chs[i].cyl = c; ide_disks_chs[i].head = h; @@ -432,6 +291,11 @@ static void ide_dev_apply_params(ide_drive_t *drive, u8 unit) drive->name); drive->dev_flags |= IDE_DFLAG_NOFLUSH; } + if (ide_nohpa & (1 << i)) { + printk(KERN_INFO "ide: disabling Host Protected Area for %s\n", + drive->name); + drive->dev_flags |= IDE_DFLAG_NOHPA; + } if (ide_noprobe & (1 << i)) { printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); drive->dev_flags |= IDE_DFLAG_NOPROBE; @@ -469,6 +333,8 @@ static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) { int i, j = 1; + /* controller (ignore) */ + /* controller : 1 (ignore) | 0 (use) */ if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1) return -EINVAL; @@ -478,7 +344,7 @@ static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) if (j) ide_ignore_cable |= (1 << i); else - ide_ignore_cable &= (1 << i); + ide_ignore_cable &= ~(1 << i); return 0; } @@ -522,6 +388,8 @@ static int __init ide_init(void) goto out_port_class; } + ide_acpi_init(); + proc_ide_create(); return 0; diff --git a/drivers/ide/ide_arm.c b/drivers/ide/ide_arm.c deleted file mode 100644 index bdcac94d7c1..00000000000 --- a/drivers/ide/ide_arm.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * ARM default IDE host driver - * - * Copyright (C) 2004 Bartlomiej Zolnierkiewicz - * Based on code by: Russell King, Ian Molton and Alexander Schulz. - * - * May be copied or modified under the terms of the GNU General Public License. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/irq.h> - -#define DRV_NAME "ide_arm" - -#define IDE_ARM_IO 0x1f0 -#define IDE_ARM_IRQ IRQ_HARDDISK - -static int __init ide_arm_init(void) -{ - unsigned long base = IDE_ARM_IO, ctl = IDE_ARM_IO + 0x206; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - - if (!request_region(base, 8, DRV_NAME)) { - printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", - DRV_NAME, base, base + 7); - return -EBUSY; - } - - if (!request_region(ctl, 1, DRV_NAME)) { - printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", - DRV_NAME, ctl); - release_region(base, 8); - return -EBUSY; - } - - memset(&hw, 0, sizeof(hw)); - ide_std_init_ports(&hw, base, ctl); - hw.irq = IDE_ARM_IRQ; - hw.chipset = ide_generic; - - return ide_host_add(NULL, hws, NULL); -} - -module_init(ide_arm_init); - -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c index 051b4ab0f35..a8b4b6af80e 100644 --- a/drivers/ide/ide_platform.c +++ b/drivers/ide/ide_platform.c @@ -19,13 +19,12 @@ #include <linux/module.h> #include <linux/ata_platform.h> #include <linux/platform_device.h> +#include <linux/interrupt.h> #include <linux/io.h> -static void __devinit plat_ide_setup_ports(hw_regs_t *hw, - void __iomem *base, - void __iomem *ctrl, - struct pata_platform_info *pdata, - int irq) +static void plat_ide_setup_ports(struct ide_hw *hw, void __iomem *base, + void __iomem *ctrl, + struct pata_platform_info *pdata, int irq) { unsigned long port = (unsigned long)base; int i; @@ -40,25 +39,24 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw, hw->io_ports.ctl_addr = (unsigned long)ctrl; hw->irq = irq; - - hw->chipset = ide_generic; } static const struct ide_port_info platform_ide_port_info = { .host_flags = IDE_HFLAG_NO_DMA, + .chipset = ide_generic, }; -static int __devinit plat_ide_probe(struct platform_device *pdev) +static int plat_ide_probe(struct platform_device *pdev) { struct resource *res_base, *res_alt, *res_irq; void __iomem *base, *alt_base; struct pata_platform_info *pdata; struct ide_host *host; int ret = 0, mmio = 0; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; struct ide_port_info d = platform_ide_port_info; - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); /* get a pointer to the register memory */ res_base = platform_get_resource(pdev, IORESOURCE_IO, 0); @@ -82,24 +80,28 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) if (mmio) { base = devm_ioremap(&pdev->dev, - res_base->start, res_base->end - res_base->start + 1); + res_base->start, resource_size(res_base)); alt_base = devm_ioremap(&pdev->dev, - res_alt->start, res_alt->end - res_alt->start + 1); + res_alt->start, resource_size(res_alt)); } else { base = devm_ioport_map(&pdev->dev, - res_base->start, res_base->end - res_base->start + 1); + res_base->start, resource_size(res_base)); alt_base = devm_ioport_map(&pdev->dev, - res_alt->start, res_alt->end - res_alt->start + 1); + res_alt->start, resource_size(res_alt)); } memset(&hw, 0, sizeof(hw)); plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start); hw.dev = &pdev->dev; + d.irq_flags = res_irq->flags & IRQF_TRIGGER_MASK; + if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE) + d.irq_flags |= IRQF_SHARED; + if (mmio) d.host_flags |= IDE_HFLAG_MMIO; - ret = ide_host_add(&d, hws, &host); + ret = ide_host_add(&d, hws, 1, &host); if (ret) goto out; @@ -111,9 +113,9 @@ out: return ret; } -static int __devexit plat_ide_remove(struct platform_device *pdev) +static int plat_ide_remove(struct platform_device *pdev) { - struct ide_host *host = pdev->dev.driver_data; + struct ide_host *host = dev_get_drvdata(&pdev->dev); ide_host_remove(host); @@ -126,7 +128,7 @@ static struct platform_driver platform_ide_driver = { .owner = THIS_MODULE, }, .probe = plat_ide_probe, - .remove = __devexit_p(plat_ide_remove), + .remove = plat_ide_remove, }; static int __init platform_ide_init(void) diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c index e021078cd06..b6f674ab4fb 100644 --- a/drivers/ide/it8172.c +++ b/drivers/ide/it8172.c @@ -37,12 +37,12 @@ #define DRV_NAME "IT8172" -static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void it8172_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u16 drive_enables; u32 drive_timing; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* * The highest value of DIOR/DIOW pulse width and recovery time @@ -66,7 +66,7 @@ static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) if (drive->media == ide_disk) /* enable prefetch */ drive_enables |= 0x0004 << (drive->dn * 4); - if (ata_id_has_iordy(drive->id)) + if (ide_pio_need_iordy(drive, pio)) /* enable IORDY sample-point */ drive_enables |= 0x0002 << (drive->dn * 4); @@ -77,14 +77,14 @@ static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_write_config_dword(dev, 0x44, drive_timing); } -static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void it8172_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int a_speed = 3 << (drive->dn * 4); int u_flag = 1 << drive->dn; int u_speed = 0; u8 reg48, reg4a; + const u8 speed = drive->dma_mode; pci_read_config_byte(dev, 0x48, ®48); pci_read_config_byte(dev, 0x4a, ®4a); @@ -98,14 +98,14 @@ static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x4a, reg4a | u_speed); } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed); - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; + drive->pio_mode = + mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; - it8172_set_pio_mode(drive, pio); + it8172_set_pio_mode(hwif, drive); } } @@ -115,7 +115,7 @@ static const struct ide_port_ops it8172_port_ops = { .set_dma_mode = it8172_set_dma_mode, }; -static const struct ide_port_info it8172_port_info __devinitdata = { +static const struct ide_port_info it8172_port_info = { .name = DRV_NAME, .port_ops = &it8172_port_ops, .enablebits = { {0x41, 0x80, 0x80}, {0x00, 0x00, 0x00} }, @@ -125,8 +125,7 @@ static const struct ide_port_info it8172_port_info __devinitdata = { .udma_mask = ATA_UDMA2, }; -static int __devinit it8172_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id) { if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) return -ENODEV; /* IT8172 is more than an IDE controller */ diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c index d7969b6d139..6b92846682f 100644 --- a/drivers/ide/it8213.c +++ b/drivers/ide/it8213.c @@ -17,15 +17,14 @@ /** * it8213_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Set the interface PIO mode. */ -static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void it8213_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int is_slave = drive->dn & 1; int master_port = 0x40; @@ -35,6 +34,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 slave_data; static DEFINE_SPINLOCK(tune_lock); int control = 0; + const u8 pio = drive->pio_mode - XFER_PIO_0; static const u8 timings[][2] = { { 0, 0 }, @@ -50,7 +50,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) control |= 1; /* Programmable timing on */ if (drive->media != ide_disk) control |= 4; /* ATAPI */ - if (pio > 2) + if (ide_pio_need_iordy(drive, pio)) control |= 2; /* IORDY */ if (is_slave) { master_data |= 0x4000; @@ -74,15 +74,14 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) /** * it8213_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Tune the ITE chipset for the DMA mode. */ -static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void it8213_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 maslave = 0x40; int a_speed = 3 << (drive->dn * 4); @@ -92,6 +91,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) int u_speed = 0; u16 reg4042, reg4a; u8 reg48, reg54, reg55; + const u8 speed = drive->dma_mode; pci_read_config_word(dev, maslave, ®4042); pci_read_config_byte(dev, 0x48, ®48); @@ -120,7 +120,6 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; if (reg48 & u_flag) pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); @@ -132,11 +131,12 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); if (speed >= XFER_MW_DMA_0) - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; + drive->pio_mode = + mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; else - pio = 2; /* only SWDMA2 is allowed */ + drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ - it8213_set_pio_mode(drive, pio); + it8213_set_pio_mode(hwif, drive); } } @@ -156,7 +156,7 @@ static const struct ide_port_ops it8213_port_ops = { .cable_detect = it8213_cable_detect, }; -static const struct ide_port_info it8213_chipset __devinitdata = { +static const struct ide_port_info it8213_chipset = { .name = DRV_NAME, .enablebits = { {0x41, 0x80, 0x80} }, .port_ops = &it8213_port_ops, @@ -177,7 +177,7 @@ static const struct ide_port_info it8213_chipset __devinitdata = { * standard helper functions to do almost all the work for us. */ -static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &it8213_chipset, NULL); } diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index 0be27ac1f07..f01ba4606be 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -5,9 +5,8 @@ * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver. * - * Documentation available from - * http://www.ite.com.tw/pc/IT8212F_V04.pdf - * Some other documents are NDA. + * Documentation: + * Datasheet is freely available, some other documents under NDA. * * The ITE8212 isn't exactly a standard IDE controller. It has two * modes. In pass through mode then it is an IDE controller. In its smart @@ -62,12 +61,15 @@ #include <linux/types.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> #define DRV_NAME "it821x" +#define QUIRK_VORTEX86 1 + struct it821x_dev { unsigned int smart:1, /* Are we in smart raid mode */ @@ -79,6 +81,7 @@ struct it821x_dev u16 pio[2]; /* Cached PIO values */ u16 mwdma[2]; /* Cached MWDMA values */ u16 udma[2]; /* Cached UDMA values (per drive) */ + u16 quirks; }; #define ATA_66 0 @@ -226,18 +229,18 @@ static void it821x_clock_strategy(ide_drive_t *drive) /** * it821x_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Tune the host to the desired PIO mode taking into the consideration * the maximum PIO mode supported by the other device on the cable. */ -static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void it821x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct it821x_dev *itdev = ide_get_hwifdata(hwif); ide_drive_t *pair = ide_get_pair_dev(drive); + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 unit = drive->dn & 1, set_pio = pio; /* Spec says 89 ref driver uses 88 */ @@ -250,7 +253,7 @@ static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) * on the cable. */ if (pair) { - u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); + u8 pair_pio = pair->pio_mode - XFER_PIO_0; /* trim PIO to the slowest of the master/slave */ if (pair_pio < set_pio) set_pio = pair_pio; @@ -391,14 +394,16 @@ static int it821x_dma_end(ide_drive_t *drive) /** * it821x_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Tune the ITE chipset for the desired DMA mode. */ -static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void it821x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { + const u8 speed = drive->dma_mode; + /* * MWDMA tuning is really hard because our MWDMA and PIO * timings are kept in the same place. We can switch in the @@ -506,12 +511,11 @@ static void it821x_quirkproc(ide_drive_t *drive) static struct ide_dma_ops it821x_pass_through_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = it821x_dma_start, .dma_end = it821x_dma_end, .dma_test_irq = ide_dma_test_irq, - .dma_timeout = ide_dma_timeout, .dma_lost_irq = ide_dma_lost_irq, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; @@ -524,7 +528,7 @@ static struct ide_dma_ops it821x_pass_through_dma_ops = { * ide DMA handlers appropriately */ -static void __devinit init_hwif_it821x(ide_hwif_t *hwif) +static void init_hwif_it821x(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); @@ -557,8 +561,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) * this is necessary. */ - pci_read_config_byte(dev, 0x08, &conf); - if (conf == 0x10) { + if (dev->revision == 0x10) { idev->timing10 = 1; hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; if (idev->smart == 0) @@ -577,6 +580,12 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) hwif->ultra_mask = ATA_UDMA6; hwif->mwdma_mask = ATA_MWDMA2; + + /* Vortex86SX quirk: prevent Ultra-DMA mode to fix BadCRC issue */ + if (idev->quirks & QUIRK_VORTEX86) { + if (dev->revision == 0x11) + hwif->ultra_mask = 0; + } } static void it8212_disable_raid(struct pci_dev *dev) @@ -596,7 +605,7 @@ static void it8212_disable_raid(struct pci_dev *dev) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); } -static unsigned int init_chipset_it821x(struct pci_dev *dev) +static int init_chipset_it821x(struct pci_dev *dev) { u8 conf; static char *mode[2] = { "pass through", "smart" }; @@ -621,7 +630,7 @@ static const struct ide_port_ops it821x_port_ops = { .cable_detect = it821x_cable_detect, }; -static const struct ide_port_info it821x_chipset __devinitdata = { +static const struct ide_port_info it821x_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_it821x, .init_hwif = init_hwif_it821x, @@ -638,7 +647,7 @@ static const struct ide_port_info it821x_chipset __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct it821x_dev *itdevs; int rc; @@ -649,6 +658,8 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic return -ENOMEM; } + itdevs->quirks = id->driver_data; + rc = ide_pci_init_one(dev, &it821x_chipset, itdevs); if (rc) kfree(itdevs); @@ -656,7 +667,7 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic return rc; } -static void __devexit it821x_remove(struct pci_dev *dev) +static void it821x_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct it821x_dev *itdevs = host->host_priv; @@ -668,6 +679,7 @@ static void __devexit it821x_remove(struct pci_dev *dev) static const struct pci_device_id it821x_pci_tbl[] = { { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 }, { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 }, + { PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), QUIRK_VORTEX86 }, { 0, }, }; @@ -677,7 +689,7 @@ static struct pci_driver it821x_pci_driver = { .name = "ITE821x IDE", .id_table = it821x_pci_tbl, .probe = it821x_init_one, - .remove = __devexit_p(it821x_remove), + .remove = it821x_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c index bf2be6431b2..ae6480dcbad 100644 --- a/drivers/ide/jmicron.c +++ b/drivers/ide/jmicron.c @@ -80,19 +80,19 @@ static u8 jmicron_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA80; } -static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void jmicron_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { } /** * jmicron_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @mode: DMA mode * * As the JMicron snoops for timings we don't need to do anything here. */ -static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void jmicron_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { } @@ -102,7 +102,7 @@ static const struct ide_port_ops jmicron_port_ops = { .cable_detect = jmicron_cable_detect, }; -static const struct ide_port_info jmicron_chipset __devinitdata = { +static const struct ide_port_info jmicron_chipset = { .name = DRV_NAME, .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } }, .port_ops = &jmicron_port_ops, @@ -120,7 +120,7 @@ static const struct ide_port_info jmicron_chipset __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &jmicron_chipset, NULL); } diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c index 3c60064f1d4..adc5fe9daaf 100644 --- a/drivers/ide/macide.c +++ b/drivers/ide/macide.c @@ -17,6 +17,7 @@ #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/ide.h> +#include <linux/module.h> #include <asm/macintosh.h> #include <asm/macints.h> @@ -53,17 +54,20 @@ volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR); -int macide_ack_intr(ide_hwif_t* hwif) +int macide_test_irq(ide_hwif_t *hwif) { - if (*ide_ifr & 0x20) { - *ide_ifr &= ~0x20; + if (*ide_ifr & 0x20) return 1; - } return 0; } -static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base, - int irq, ide_ack_intr_t *ack_intr) +static void macide_clear_irq(ide_drive_t *drive) +{ + *ide_ifr &= ~0x20; +} + +static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base, + int irq) { int i; @@ -75,11 +79,20 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base, hw->io_ports.ctl_addr = base + IDE_CONTROL; hw->irq = irq; - hw->ack_intr = ack_intr; - - hw->chipset = ide_generic; } +static const struct ide_port_ops macide_port_ops = { + .clear_irq = macide_clear_irq, + .test_irq = macide_test_irq, +}; + +static const struct ide_port_info macide_port_info = { + .port_ops = &macide_port_ops, + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, + .irq_flags = IRQF_SHARED, + .chipset = ide_generic, +}; + static const char *mac_ide_name[] = { "Quadra", "Powerbook", "Powerbook Baboon" }; @@ -89,10 +102,10 @@ static const char *mac_ide_name[] = static int __init macide_init(void) { - ide_ack_intr_t *ack_intr; unsigned long base; int irq; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; + struct ide_port_info d = macide_port_info; if (!MACH_IS_MAC) return -ENODEV; @@ -100,17 +113,15 @@ static int __init macide_init(void) switch (macintosh_config->ide_type) { case MAC_IDE_QUADRA: base = IDE_BASE; - ack_intr = macide_ack_intr; irq = IRQ_NUBUS_F; break; case MAC_IDE_PB: base = IDE_BASE; - ack_intr = macide_ack_intr; irq = IRQ_NUBUS_C; break; case MAC_IDE_BABOON: base = BABOON_BASE; - ack_intr = NULL; + d.port_ops = NULL; irq = IRQ_BABOON_1; break; default: @@ -120,9 +131,9 @@ static int __init macide_init(void) printk(KERN_INFO "ide: Macintosh %s IDE controller\n", mac_ide_name[macintosh_config->ide_type - 1]); - macide_setup_ports(&hw, base, irq, ack_intr); + macide_setup_ports(&hw, base, irq); - return ide_host_add(NULL, hws, NULL); + return ide_host_add(&d, hws, 1, NULL); } module_init(macide_init); diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index 83643ed9a42..392fd106edf 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -61,57 +61,34 @@ static u8 superio_dma_sff_read_status(ide_hwif_t *hwif) return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS); } -static void superio_tf_read(ide_drive_t *drive, ide_task_t *task) +static void superio_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, + u8 valid) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data = inw(io_ports->data_addr); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) + if (valid & IDE_VALID_ERROR) + tf->error = inb(io_ports->feature_addr); + if (valid & IDE_VALID_NSECT) tf->nsect = inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) + if (valid & IDE_VALID_LBAL) tf->lbal = inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) + if (valid & IDE_VALID_LBAM) tf->lbam = inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) + if (valid & IDE_VALID_LBAH) tf->lbah = inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + if (valid & IDE_VALID_DEVICE) tf->device = superio_ide_inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = inb(io_ports->lbah_addr); - } } +static void ns87415_dev_select(ide_drive_t *drive); + static const struct ide_tp_ops superio_tp_ops = { .exec_command = ide_exec_command, .read_status = superio_read_status, .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, - .set_irq = ide_set_irq, - + .dev_select = ns87415_dev_select, .tf_load = ide_tf_load, .tf_read = superio_tf_read, @@ -119,7 +96,7 @@ static const struct ide_tp_ops superio_tp_ops = { .output_data = ide_output_data, }; -static void __devinit superio_init_iops(struct hwif_s *hwif) +static void superio_init_iops(struct hwif_s *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); u32 dma_stat; @@ -190,10 +167,18 @@ static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma) local_irq_restore(flags); } -static void ns87415_selectproc (ide_drive_t *drive) +static void ns87415_dev_select(ide_drive_t *drive) { ns87415_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA)); + + outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr); +} + +static void ns87415_dma_start(ide_drive_t *drive) +{ + ns87415_prepare_drive(drive, 1); + ide_dma_start(drive); } static int ns87415_dma_end(ide_drive_t *drive) @@ -201,7 +186,6 @@ static int ns87415_dma_end(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; u8 dma_stat = 0, dma_cmd = 0; - drive->waiting_for_dma = 0; dma_stat = hwif->dma_ops->dma_sff_read_status(hwif); /* get DMA command mode */ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); @@ -210,24 +194,14 @@ static int ns87415_dma_end(ide_drive_t *drive) /* from ERRATA: clear the INTR & ERROR bits */ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD); - /* and free any DMA resources */ - ide_destroy_dmatable(drive); - /* verify good DMA status */ - return (dma_stat & 7) != 4; -} -static int ns87415_dma_setup(ide_drive_t *drive) -{ - /* select DMA xfer */ - ns87415_prepare_drive(drive, 1); - if (!ide_dma_setup(drive)) - return 0; - /* DMA failed: select PIO xfer */ ns87415_prepare_drive(drive, 0); - return 1; + + /* verify good DMA status */ + return (dma_stat & 7) != 4; } -static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) +static void init_hwif_ns87415 (ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned int ctrl, using_inta; @@ -242,7 +216,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) * Also, leave IRQ masked during drive probing, to prevent infinite * interrupts from a potentially floating INTA.. * - * IRQs get unmasked in selectproc when drive is first used. + * IRQs get unmasked in dev_select() when drive is first used. */ (void) pci_read_config_dword(dev, 0x40, &ctrl); (void) pci_read_config_byte(dev, 0x09, &progif); @@ -270,7 +244,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) #ifdef __sparc_v9__ /* * XXX: Reset the device, if we don't it will not respond to - * SELECT_DRIVE() properly during first ide_probe_port(). + * dev_select() properly during first ide_probe_port(). */ timeout = 10000; outb(12, hwif->io_ports.ctl_addr); @@ -286,9 +260,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) } if (!using_inta) - hwif->irq = __ide_default_irq(hwif->io_ports.data_addr); - else if (!hwif->irq && hwif->mate && hwif->mate->irq) - hwif->irq = hwif->mate->irq; /* share IRQ with mate */ + hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel); if (!hwif->dma_base) return; @@ -296,32 +268,41 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) outb(0x60, hwif->dma_base + ATA_DMA_STATUS); } -static const struct ide_port_ops ns87415_port_ops = { - .selectproc = ns87415_selectproc, +static const struct ide_tp_ops ns87415_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, + + .dev_select = ns87415_dev_select, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, }; static const struct ide_dma_ops ns87415_dma_ops = { .dma_host_set = ide_dma_host_set, - .dma_setup = ns87415_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, + .dma_setup = ide_dma_setup, + .dma_start = ns87415_dma_start, .dma_end = ns87415_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = superio_dma_sff_read_status, }; -static const struct ide_port_info ns87415_chipset __devinitdata = { +static const struct ide_port_info ns87415_chipset = { .name = DRV_NAME, .init_hwif = init_hwif_ns87415, - .port_ops = &ns87415_port_ops, + .tp_ops = &ns87415_tp_ops, .dma_ops = &ns87415_dma_ops, .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | IDE_HFLAG_NO_ATAPI_DMA, }; -static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d = ns87415_chipset; diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c index 6048eda3cd6..26a45007e53 100644 --- a/drivers/ide/opti621.c +++ b/drivers/ide/opti621.c @@ -8,77 +8,6 @@ * Jan Harkes <jaharkes@cwi.nl>, * Mark Lord <mlord@pobox.com> * Some parts of code are from ali14xx.c and from rz1000.c. - * - * OPTi is trademark of OPTi, Octek is trademark of Octek. - * - * I used docs from OPTi databook, from ftp.opti.com, file 9123-0002.ps - * and disassembled/traced setupvic.exe (DOS program). - * It increases kernel code about 2 kB. - * I don't have this card no more, but I hope I can get some in case - * of needed development. - * My card is Octek PIDE 1.01 (on card) or OPTiViC (program). - * It has a place for a secondary connector in circuit, but nothing - * is there. Also BIOS says no address for - * secondary controller (see bellow in ide_init_opti621). - * I've only tested this on my system, which only has one disk. - * It's Western Digital WDAC2850, with PIO mode 3. The PCI bus - * is at 20 MHz (I have DX2/80, I tried PCI at 40, but I got random - * lockups). I tried the OCTEK double speed CD-ROM and - * it does not work! But I can't boot DOS also, so it's probably - * hardware fault. I have connected Conner 80MB, the Seagate 850MB (no - * problems) and Seagate 1GB (as slave, WD as master). My experiences - * with the third, 1GB drive: I got 3MB/s (hdparm), but sometimes - * it slows to about 100kB/s! I don't know why and I have - * not this drive now, so I can't try it again. - * I write this driver because I lost the paper ("manual") with - * settings of jumpers on the card and I have to boot Linux with - * Loadlin except LILO, cause I have to run the setupvic.exe program - * already or I get disk errors (my test: rpm -Vf - * /usr/X11R6/bin/XF86_SVGA - or any big file). - * Some numbers from hdparm -t /dev/hda: - * Timing buffer-cache reads: 32 MB in 3.02 seconds =10.60 MB/sec - * Timing buffered disk reads: 16 MB in 5.52 seconds = 2.90 MB/sec - * I have 4 Megs/s before, but I don't know why (maybe changes - * in hdparm test). - * After release of 0.1, I got some successful reports, so it might work. - * - * The main problem with OPTi is that some timings for master - * and slave must be the same. For example, if you have master - * PIO 3 and slave PIO 0, driver have to set some timings of - * master for PIO 0. Second problem is that opti621_set_pio_mode - * got only one drive to set, but have to set both drives. - * This is solved in compute_pios. If you don't set - * the second drive, compute_pios use ide_get_best_pio_mode - * for autoselect mode (you can change it to PIO 0, if you want). - * If you then set the second drive to another PIO, the old value - * (automatically selected) will be overrided by yours. - * There is a 25/33MHz switch in configuration - * register, but driver is written for use at any frequency. - * - * Version 0.1, Nov 8, 1996 - * by Jaromir Koutek, for 2.1.8. - * Initial version of driver. - * - * Version 0.2 - * Number 0.2 skipped. - * - * Version 0.3, Nov 29, 1997 - * by Mark Lord (probably), for 2.1.68 - * Updates for use with new IDE block driver. - * - * Version 0.4, Dec 14, 1997 - * by Jan Harkes - * Fixed some errors and cleaned the code. - * - * Version 0.5, Jan 2, 1998 - * by Jaromir Koutek - * Updates for use with (again) new IDE block driver. - * Update of documentation. - * - * Version 0.6, Jan 2, 1999 - * by Jaromir Koutek - * Reversed to version 0.3 of the driver, because - * 0.5 doesn't work. */ #include <linux/types.h> @@ -133,11 +62,12 @@ static u8 read_reg(int reg) return ret; } -static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; ide_drive_t *pair = ide_get_pair_dev(drive); unsigned long flags; + unsigned long mode = drive->pio_mode, pair_mode; + const u8 pio = mode - XFER_PIO_0; u8 tim, misc, addr_pio = pio, clk; /* DRDY is default 2 (by OPTi Databook) */ @@ -150,11 +80,12 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */ }; - drive->drive_data = XFER_PIO_0 + pio; + ide_set_drivedata(drive, (void *)mode); if (pair) { - if (pair->drive_data && pair->drive_data < drive->drive_data) - addr_pio = pair->drive_data - XFER_PIO_0; + pair_mode = (unsigned long)ide_get_drivedata(pair); + if (pair_mode && pair_mode < mode) + addr_pio = pair_mode - XFER_PIO_0; } spin_lock_irqsave(&opti621_lock, flags); @@ -200,7 +131,7 @@ static const struct ide_port_ops opti621_port_ops = { .set_pio_mode = opti621_set_pio_mode, }; -static const struct ide_port_info opti621_chipset __devinitdata = { +static const struct ide_port_info opti621_chipset = { .name = DRV_NAME, .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, .port_ops = &opti621_port_ops, @@ -208,7 +139,7 @@ static const struct ide_port_info opti621_chipset __devinitdata = { .pio_mask = ATA_PIO4, }; -static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &opti621_chipset, NULL); } diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index a7ac490c9ae..ba20d18c037 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -39,27 +39,12 @@ /* Primary Control Offset */ #define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6 -/* - * PalmChip 3710 IDE Controller UDMA timing structure Definition - */ -struct palm_bk3710_udmatiming { - unsigned int rptime; /* Ready to pause time */ - unsigned int cycletime; /* Cycle Time */ -}; - #define BK3710_BMICP 0x00 #define BK3710_BMISP 0x02 #define BK3710_BMIDTP 0x04 -#define BK3710_BMICS 0x08 -#define BK3710_BMISS 0x0A -#define BK3710_BMIDTS 0x0C #define BK3710_IDETIMP 0x40 -#define BK3710_IDETIMS 0x42 -#define BK3710_SIDETIM 0x44 -#define BK3710_SLEWCTL 0x45 #define BK3710_IDESTATUS 0x47 #define BK3710_UDMACTL 0x48 -#define BK3710_UDMATIM 0x4A #define BK3710_MISCCTL 0x50 #define BK3710_REGSTB 0x54 #define BK3710_REGRCVR 0x58 @@ -71,17 +56,22 @@ struct palm_bk3710_udmatiming { #define BK3710_UDMATRP 0x70 #define BK3710_UDMAENV 0x74 #define BK3710_IORDYTMP 0x78 -#define BK3710_IORDYTMS 0x7C static unsigned ideclk_period; /* in nanoseconds */ +struct palm_bk3710_udmatiming { + unsigned int rptime; /* tRP -- Ready to pause time (nsec) */ + unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */ + /* tENV is always a minimum of 20 nsec */ +}; + static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { - {160, 240}, /* UDMA Mode 0 */ - {125, 160}, /* UDMA Mode 1 */ - {100, 120}, /* UDMA Mode 2 */ - {100, 90}, /* UDMA Mode 3 */ - {100, 60}, /* UDMA Mode 4 */ - {85, 40}, /* UDMA Mode 5 */ + { 160, 240 / 2 }, /* UDMA Mode 0 */ + { 125, 160 / 2 }, /* UDMA Mode 1 */ + { 100, 120 / 2 }, /* UDMA Mode 2 */ + { 100, 90 / 2 }, /* UDMA Mode 3 */ + { 100, 60 / 2 }, /* UDMA Mode 4 */ + { 85, 40 / 2 }, /* UDMA Mode 5 */ }; static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, @@ -98,11 +88,6 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime, ideclk_period) - 1; - /* udmatim Register */ - val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0); - val16 |= (mode << (dev ? 4 : 0)); - writew(val16, base + BK3710_UDMATIM); - /* udmastb Ultra DMA Access Strobe Width */ val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8)); val32 |= (t0 << (dev ? 8 : 0)); @@ -163,10 +148,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, u32 val32; struct ide_timing *t; + t = ide_timing_find_mode(XFER_PIO_0 + mode); + /* PIO Data Setup */ t0 = DIV_ROUND_UP(cycletime, ideclk_period); - t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active, - ideclk_period); + t2 = DIV_ROUND_UP(t->active, ideclk_period); t2i = t0 - t2 - 1; t2 -= 1; @@ -180,14 +166,13 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, writel(val32, base + BK3710_DATRCVR); if (mate) { - u8 mode2 = ide_get_best_pio_mode(mate, 255, 4); + u8 mode2 = mate->pio_mode - XFER_PIO_0; if (mode2 < mode) mode = mode2; } /* TASKFILE Setup */ - t = ide_timing_find_mode(XFER_PIO_0 + mode); t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period); t2 = DIV_ROUND_UP(t->act8b, ideclk_period); @@ -203,10 +188,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, writel(val32, base + BK3710_REGRCVR); } -static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) +static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int is_slave = drive->dn & 1; - void __iomem *base = (void *)drive->hwif->dma_base; + void __iomem *base = (void __iomem *)hwif->dma_base; + const u8 xferspeed = drive->dma_mode; if (xferspeed >= XFER_UDMA_0) { palm_bk3710_setudmamode(base, is_slave, @@ -218,12 +204,13 @@ static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) } } -static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) +static void palm_bk3710_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { unsigned int cycle_time; int is_slave = drive->dn & 1; ide_drive_t *mate; - void __iomem *base = (void *)drive->hwif->dma_base; + void __iomem *base = (void __iomem *)hwif->dma_base; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* * Obtain the drive PIO data for tuning the Palm Chip registers @@ -233,45 +220,26 @@ static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio); } -static void __devinit palm_bk3710_chipinit(void __iomem *base) +static void palm_bk3710_chipinit(void __iomem *base) { /* - * enable the reset_en of ATA controller so that when ata signals - * are brought out, by writing into device config. at that - * time por_n signal should not be 'Z' and have a stable value. + * REVISIT: the ATA reset signal needs to be managed through a + * GPIO, which means it should come from platform_data. Until + * we get and use such information, we have to trust that things + * have been reset before we get here. */ - writel(0x0300, base + BK3710_MISCCTL); - - /* wait for some time and deassert the reset of ATA Device. */ - mdelay(100); - - /* Deassert the Reset */ - writel(0x0200, base + BK3710_MISCCTL); /* * Program the IDETIMP Register Value based on the following assumptions * * (ATA_IDETIMP_IDEEN , ENABLE ) | - * (ATA_IDETIMP_SLVTIMEN , DISABLE) | - * (ATA_IDETIMP_RDYSMPL , 70NS) | - * (ATA_IDETIMP_RDYRCVRY , 50NS) | - * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) | * (ATA_IDETIMP_PREPOST1 , DISABLE) | - * (ATA_IDETIMP_RDYSEN1 , DISABLE) | - * (ATA_IDETIMP_PIOFTIM1 , DISABLE) | - * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) | * (ATA_IDETIMP_PREPOST0 , DISABLE) | - * (ATA_IDETIMP_RDYSEN0 , DISABLE) | - * (ATA_IDETIMP_PIOFTIM0 , DISABLE) - */ - writew(0xB388, base + BK3710_IDETIMP); - - /* - * Configure SIDETIM Register - * (ATA_SIDETIM_RDYSMPS1 ,120NS ) | - * (ATA_SIDETIM_RDYRCYS1 ,120NS ) + * + * DM6446 silicon rev 2.1 and earlier have no observed net benefit + * from enabling prefetch/postwrite. */ - writeb(0, base + BK3710_SIDETIM); + writew(BIT(15), base + BK3710_IDETIMP); /* * UDMACTL Ultra-ATA DMA Control @@ -283,11 +251,11 @@ static void __devinit palm_bk3710_chipinit(void __iomem *base) /* * MISCCTL Miscellaneous Conrol Register - * (ATA_MISCCTL_RSTMODEP , 1) | - * (ATA_MISCCTL_RESETP , 0) | + * (ATA_MISCCTL_HWNHLD1P , 1 cycle) + * (ATA_MISCCTL_HWNHLD0P , 1 cycle) * (ATA_MISCCTL_TIMORIDE , 1) */ - writel(0x201, base + BK3710_MISCCTL); + writel(0x001, base + BK3710_MISCCTL); /* * IORDYTMP IORDY Timer for Primary Register @@ -314,8 +282,7 @@ static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA80; } -static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int palm_bk3710_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); @@ -333,33 +300,34 @@ static const struct ide_port_ops palm_bk3710_ports_ops = { .cable_detect = palm_bk3710_cable_detect, }; -static struct ide_port_info __devinitdata palm_bk3710_port_info = { +static struct ide_port_info palm_bk3710_port_info = { .init_dma = palm_bk3710_init_dma, .port_ops = &palm_bk3710_ports_ops, .dma_ops = &sff_dma_ops, .host_flags = IDE_HFLAG_MMIO, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, + .chipset = ide_palm3710, }; static int __init palm_bk3710_probe(struct platform_device *pdev) { struct clk *clk; struct resource *mem, *irq; - unsigned long base, rate; + void __iomem *base; + unsigned long rate, mem_size; int i, rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; - clk = clk_get(&pdev->dev, "IDECLK"); + clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) return -ENODEV; clk_enable(clk); rate = clk_get_rate(clk); - ideclk_period = 1000000000UL / rate; - /* Register the IDE interface with Linux ATA Interface */ - memset(&hw, 0, sizeof(hw)); + /* NOTE: round *down* to meet minimum timings; we count in clocks */ + ideclk_period = 1000000000UL / rate; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (mem == NULL) { @@ -373,28 +341,36 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) return -ENODEV; } - if (request_mem_region(mem->start, mem->end - mem->start + 1, - "palm_bk3710") == NULL) { + mem_size = resource_size(mem); + if (request_mem_region(mem->start, mem_size, "palm_bk3710") == NULL) { printk(KERN_ERR "failed to request memory region\n"); return -EBUSY; } - base = IO_ADDRESS(mem->start); + base = ioremap(mem->start, mem_size); + if (!base) { + printk(KERN_ERR "failed to map IO memory\n"); + release_mem_region(mem->start, mem_size); + return -ENOMEM; + } /* Configure the Palm Chip controller */ - palm_bk3710_chipinit((void __iomem *)base); + palm_bk3710_chipinit(base); + memset(&hw, 0, sizeof(hw)); for (i = 0; i < IDE_NR_PORTS - 2; i++) - hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; - hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; + hw.io_ports_array[i] = (unsigned long) + (base + IDE_PALM_ATA_PRI_REG_OFFSET + i); + hw.io_ports.ctl_addr = (unsigned long) + (base + IDE_PALM_ATA_PRI_CTL_OFFSET); hw.irq = irq->start; hw.dev = &pdev->dev; - hw.chipset = ide_palm3710; palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 : ATA_UDMA5; - rc = ide_host_add(&palm_bk3710_port_info, hws, NULL); + /* Register the IDE interface with Linux */ + rc = ide_host_add(&palm_bk3710_port_info, hws, 1, NULL); if (rc) goto out; diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c index f21290c4b44..df73cbd9387 100644 --- a/drivers/ide/pdc202xx_new.c +++ b/drivers/ide/pdc202xx_new.c @@ -40,18 +40,6 @@ #define DBG(fmt, args...) #endif -static const char *pdc_quirk_drives[] = { - "QUANTUM FIREBALLlct08 08", - "QUANTUM FIREBALLP KA6.4", - "QUANTUM FIREBALLP KA9.1", - "QUANTUM FIREBALLP LM20.4", - "QUANTUM FIREBALLP KX13.6", - "QUANTUM FIREBALLP KX20.5", - "QUANTUM FIREBALLP KX27.3", - "QUANTUM FIREBALLP LM20.5", - NULL -}; - static u8 max_dma_rate(struct pci_dev *pdev) { u8 mode; @@ -141,11 +129,11 @@ static struct udma_timing { { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ }; -static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; + const u8 speed = drive->dma_mode; /* * IDE core issues SETFEATURES_XFER to the drive first (thanks to @@ -179,11 +167,11 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) } } -static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void pdcnew_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; + const u8 pio = drive->pio_mode - XFER_PIO_0; if (max_dma_rate(dev) == 4) { set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c); @@ -200,19 +188,6 @@ static u8 pdcnew_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA80; } -static void pdcnew_quirkproc(ide_drive_t *drive) -{ - const char **list, *m = (char *)&drive->id[ATA_ID_PROD]; - - for (list = pdc_quirk_drives; *list != NULL; list++) - if (strstr(m, *list) != NULL) { - drive->quirk_list = 2; - return; - } - - drive->quirk_list = 0; -} - static void pdcnew_reset(ide_drive_t *drive) { /* @@ -325,7 +300,7 @@ static void apple_kiwi_init(struct pci_dev *pdev) } #endif /* CONFIG_PPC_PMAC */ -static unsigned int init_chipset_pdcnew(struct pci_dev *dev) +static int init_chipset_pdcnew(struct pci_dev *dev) { const char *name = DRV_NAME; unsigned long dma_base = pci_resource_start(dev, 4); @@ -444,10 +419,10 @@ static unsigned int init_chipset_pdcnew(struct pci_dev *dev) #endif out: - return dev->irq; + return 0; } -static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) +static struct pci_dev *pdc20270_get_dev2(struct pci_dev *dev) { struct pci_dev *dev2; @@ -473,7 +448,6 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) static const struct ide_port_ops pdcnew_port_ops = { .set_pio_mode = pdcnew_set_pio_mode, .set_dma_mode = pdcnew_set_dma_mode, - .quirkproc = pdcnew_quirkproc, .resetproc = pdcnew_reset, .cable_detect = pdcnew_cable_detect, }; @@ -491,7 +465,7 @@ static const struct ide_port_ops pdcnew_port_ops = { .udma_mask = udma, \ } -static const struct ide_port_info pdcnew_chipsets[] __devinitdata = { +static const struct ide_port_info pdcnew_chipsets[] = { /* 0: PDC202{68,70} */ DECLARE_PDCNEW_DEV(ATA_UDMA5), /* 1: PDC202{69,71,75,76,77} */ DECLARE_PDCNEW_DEV(ATA_UDMA6), }; @@ -505,7 +479,7 @@ static const struct ide_port_info pdcnew_chipsets[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data]; struct pci_dev *bridge = dev->bus->self; @@ -540,7 +514,7 @@ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_de return ide_pci_init_one(dev, d, NULL); } -static void __devexit pdc202new_remove(struct pci_dev *dev) +static void pdc202new_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; @@ -565,7 +539,7 @@ static struct pci_driver pdc202new_pci_driver = { .name = "Promise_IDE", .id_table = pdc202new_pci_tbl, .probe = pdc202new_init_one, - .remove = __devexit_p(pdc202new_remove), + .remove = pdc202new_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 97193323aeb..224ad46d6cb 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2006-2007 MontaVista Software, Inc. - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc. + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz * * Portions Copyright (C) 1999 Promise Technology, Inc. * Author: Frank Tiernan (frankt@promise.com) @@ -21,42 +21,15 @@ #define DRV_NAME "pdc202xx_old" -#define PDC202XX_DEBUG_DRIVE_INFO 0 - -static const char *pdc_quirk_drives[] = { - "QUANTUM FIREBALLlct08 08", - "QUANTUM FIREBALLP KA6.4", - "QUANTUM FIREBALLP KA9.1", - "QUANTUM FIREBALLP LM20.4", - "QUANTUM FIREBALLP KX13.6", - "QUANTUM FIREBALLP KX20.5", - "QUANTUM FIREBALLP KX27.3", - "QUANTUM FIREBALLP LM20.5", - NULL -}; - -static void pdc_old_disable_66MHz_clock(ide_hwif_t *); - -static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) +static void pdc202xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 drive_pci = 0x60 + (drive->dn << 2); + const u8 speed = drive->dma_mode; u8 AP = 0, BP = 0, CP = 0; u8 TA = 0, TB = 0, TC = 0; -#if PDC202XX_DEBUG_DRIVE_INFO - u32 drive_conf = 0; - pci_read_config_dword(dev, drive_pci, &drive_conf); -#endif - - /* - * TODO: do this once per channel - */ - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) - pdc_old_disable_66MHz_clock(hwif); - pci_read_config_byte(dev, drive_pci, &AP); pci_read_config_byte(dev, drive_pci + 1, &BP); pci_read_config_byte(dev, drive_pci + 2, &CP); @@ -85,7 +58,7 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A */ AP &= ~0x3f; - if (ata_id_iordy_disable(drive->id)) + if (ide_pio_need_iordy(drive, speed - XFER_PIO_0)) AP |= 0x20; /* set IORDY_EN bit */ if (drive->media == ide_disk) AP |= 0x10; /* set Prefetch_EN bit */ @@ -101,19 +74,33 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, drive_pci + 1, BP | TB); pci_write_config_byte(dev, drive_pci + 2, CP | TC); } +} -#if PDC202XX_DEBUG_DRIVE_INFO - printk(KERN_DEBUG "%s: %s drive%d 0x%08x ", - drive->name, ide_xfer_verbose(speed), - drive->dn, drive_conf); - pci_read_config_dword(dev, drive_pci, &drive_conf); - printk("0x%08x\n", drive_conf); -#endif +static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) +{ + drive->dma_mode = drive->pio_mode; + pdc202xx_set_mode(hwif, drive); } -static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) +static int pdc202xx_test_irq(ide_hwif_t *hwif) { - pdc202xx_set_mode(drive, XFER_PIO_0 + pio); + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long high_16 = pci_resource_start(dev, 4); + u8 sc1d = inb(high_16 + 0x1d); + + if (hwif->channel) { + /* + * bit 7: error, bit 6: interrupting, + * bit 5: FIFO full, bit 4: FIFO empty + */ + return (sc1d & 0x40) ? 1 : 0; + } else { + /* + * bit 3: error, bit 2: interrupting, + * bit 1: FIFO full, bit 0: FIFO empty + */ + return (sc1d & 0x04) ? 1 : 0; + } } static u8 pdc2026x_cable_detect(ide_hwif_t *hwif) @@ -151,17 +138,9 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); } -static void pdc202xx_quirkproc(ide_drive_t *drive) +static void pdc2026x_init_hwif(ide_hwif_t *hwif) { - const char **list, *m = (char *)&drive->id[ATA_ID_PROD]; - - for (list = pdc_quirk_drives; *list != NULL; list++) - if (strstr(m, *list) != NULL) { - drive->quirk_list = 2; - return; - } - - drive->quirk_list = 0; + pdc_old_disable_66MHz_clock(hwif); } static void pdc202xx_dma_start(ide_drive_t *drive) @@ -177,7 +156,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive) u8 clock = inb(high_16 + 0x11); outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11); - word_count = (rq->nr_sectors << 8); + word_count = (blk_rq_sectors(rq) << 8); word_count = (rq_data_dir(rq) == READ) ? word_count | 0x05000000 : word_count | 0x06000000; @@ -203,68 +182,7 @@ static int pdc202xx_dma_end(ide_drive_t *drive) return ide_dma_end(drive); } -static int pdc202xx_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - unsigned long high_16 = hwif->extra_base - 16; - u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - u8 sc1d = inb(high_16 + 0x001d); - - if (hwif->channel) { - /* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */ - if ((sc1d & 0x50) == 0x50) - goto somebody_else; - else if ((sc1d & 0x40) == 0x40) - return (dma_stat & 4) == 4; - } else { - /* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */ - if ((sc1d & 0x05) == 0x05) - goto somebody_else; - else if ((sc1d & 0x04) == 0x04) - return (dma_stat & 4) == 4; - } -somebody_else: - return (dma_stat & 4) == 4; /* return 1 if INTR asserted */ -} - -static void pdc202xx_reset_host (ide_hwif_t *hwif) -{ - unsigned long high_16 = hwif->extra_base - 16; - u8 udma_speed_flag = inb(high_16 | 0x001f); - - outb(udma_speed_flag | 0x10, high_16 | 0x001f); - mdelay(100); - outb(udma_speed_flag & ~0x10, high_16 | 0x001f); - mdelay(2000); /* 2 seconds ?! */ - - printk(KERN_WARNING "PDC202XX: %s channel reset.\n", - hwif->channel ? "Secondary" : "Primary"); -} - -static void pdc202xx_reset (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_hwif_t *mate = hwif->mate; - - pdc202xx_reset_host(hwif); - pdc202xx_reset_host(mate); - - ide_set_max_pio(drive); -} - -static void pdc202xx_dma_lost_irq(ide_drive_t *drive) -{ - pdc202xx_reset(drive); - ide_dma_lost_irq(drive); -} - -static void pdc202xx_dma_timeout(ide_drive_t *drive) -{ - pdc202xx_reset(drive); - ide_dma_timeout(drive); -} - -static unsigned int init_chipset_pdc202xx(struct pci_dev *dev) +static int init_chipset_pdc202xx(struct pci_dev *dev) { unsigned long dmabase = pci_resource_start(dev, 4); u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0; @@ -290,11 +208,10 @@ static unsigned int init_chipset_pdc202xx(struct pci_dev *dev) printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN"); } out: - return dev->irq; + return 0; } -static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, - const char *name) +static void pdc202ata4_fixup_irq(struct pci_dev *dev, const char *name) { if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) { u8 irq = 0, irq2 = 0; @@ -317,38 +234,24 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, static const struct ide_port_ops pdc20246_port_ops = { .set_pio_mode = pdc202xx_set_pio_mode, .set_dma_mode = pdc202xx_set_mode, - .quirkproc = pdc202xx_quirkproc, + .test_irq = pdc202xx_test_irq, }; static const struct ide_port_ops pdc2026x_port_ops = { .set_pio_mode = pdc202xx_set_pio_mode, .set_dma_mode = pdc202xx_set_mode, - .quirkproc = pdc202xx_quirkproc, - .resetproc = pdc202xx_reset, + .test_irq = pdc202xx_test_irq, .cable_detect = pdc2026x_cable_detect, }; -static const struct ide_dma_ops pdc20246_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = ide_dma_end, - .dma_test_irq = pdc202xx_dma_test_irq, - .dma_lost_irq = pdc202xx_dma_lost_irq, - .dma_timeout = pdc202xx_dma_timeout, - .dma_sff_read_status = ide_dma_sff_read_status, -}; - static const struct ide_dma_ops pdc2026x_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = pdc202xx_dma_start, .dma_end = pdc202xx_dma_end, - .dma_test_irq = pdc202xx_dma_test_irq, - .dma_lost_irq = pdc202xx_dma_lost_irq, - .dma_timeout = pdc202xx_dma_timeout, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; @@ -356,6 +259,7 @@ static const struct ide_dma_ops pdc2026x_dma_ops = { { \ .name = DRV_NAME, \ .init_chipset = init_chipset_pdc202xx, \ + .init_hwif = pdc2026x_init_hwif, \ .port_ops = &pdc2026x_port_ops, \ .dma_ops = &pdc2026x_dma_ops, \ .host_flags = IDE_HFLAGS_PDC202XX, \ @@ -365,12 +269,12 @@ static const struct ide_dma_ops pdc2026x_dma_ops = { .max_sectors = sectors, \ } -static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = { +static const struct ide_port_info pdc202xx_chipsets[] = { { /* 0: PDC20246 */ .name = DRV_NAME, .init_chipset = init_chipset_pdc202xx, .port_ops = &pdc20246_port_ops, - .dma_ops = &pdc20246_dma_ops, + .dma_ops = &sff_dma_ops, .host_flags = IDE_HFLAGS_PDC202XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -392,7 +296,8 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int pdc202xx_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { const struct ide_port_info *d; u8 idx = id->driver_data; @@ -451,6 +356,6 @@ static void __exit pdc202xx_ide_exit(void) module_init(pdc202xx_ide_init); module_exit(pdc202xx_ide_exit); -MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); +MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for older Promise IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index f1e2e4ef0d7..a671cead6ae 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -8,8 +8,8 @@ * * Documentation: * - * Publically available from Intel web site. Errata documentation - * is also publically available. As an aide to anyone hacking on this + * Publicly available from Intel web site. Errata documentation + * is also publicly available. As an aide to anyone hacking on this * driver the list of errata that are relevant is below.going back to * PIIX4. Older device documentation is now a bit tricky to find. * @@ -59,15 +59,14 @@ static int no_piix_dma; /** * piix_set_pio_mode - set host controller for PIO mode + * @port: port * @drive: drive - * @pio: PIO mode number * * Set the interface PIO mode based upon the settings done by AMI BIOS. */ -static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void piix_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int is_slave = drive->dn & 1; int master_port = hwif->channel ? 0x42 : 0x40; @@ -77,6 +76,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 slave_data; static DEFINE_SPINLOCK(tune_lock); int control = 0; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* ISP RTC */ static const u8 timings[][2]= { @@ -98,7 +98,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) control |= 1; /* Programmable timing on */ if (drive->media == ide_disk) control |= 4; /* Prefetch, post write */ - if (pio > 2) + if (ide_pio_need_iordy(drive, pio)) control |= 2; /* IORDY */ if (is_slave) { master_data |= 0x4000; @@ -127,16 +127,15 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) /** * piix_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Set a PIIX host controller to the desired DMA mode. This involves * programming the right timing data into the PCI configuration space. */ -static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void piix_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 maslave = hwif->channel ? 0x42 : 0x40; int a_speed = 3 << (drive->dn * 4); @@ -147,6 +146,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) int sitre; u16 reg4042, reg4a; u8 reg48, reg54, reg55; + const u8 speed = drive->dma_mode; pci_read_config_word(dev, maslave, ®4042); sitre = (reg4042 & 0x4000) ? 1 : 0; @@ -176,7 +176,6 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; if (reg48 & u_flag) pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); @@ -188,11 +187,12 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); if (speed >= XFER_MW_DMA_0) - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; + drive->pio_mode = + mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; else - pio = 2; /* only SWDMA2 is allowed */ + drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ - piix_set_pio_mode(drive, pio); + piix_set_pio_mode(hwif, drive); } } @@ -204,7 +204,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) * out to be nice and simple. */ -static unsigned int init_chipset_ich(struct pci_dev *dev) +static int init_chipset_ich(struct pci_dev *dev) { u32 extra = 0; @@ -263,6 +263,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ + { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */ /* end marker */ { 0, } }; @@ -296,7 +297,7 @@ static u8 piix_cable_detect(ide_hwif_t *hwif) * capabilities of the hardware. */ -static void __devinit init_hwif_piix(ide_hwif_t *hwif) +static void init_hwif_piix(ide_hwif_t *hwif) { if (!hwif->dma_base) return; @@ -318,40 +319,32 @@ static const struct ide_port_ops ich_port_ops = { .cable_detect = piix_cable_detect, }; -#ifndef CONFIG_IA64 - #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS -#else - #define IDE_HFLAGS_PIIX 0 -#endif - #define DECLARE_PIIX_DEV(udma) \ { \ .name = DRV_NAME, \ .init_hwif = init_hwif_piix, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ .port_ops = &piix_port_ops, \ - .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ .mwdma_mask = ATA_MWDMA12_ONLY, \ .udma_mask = udma, \ } -#define DECLARE_ICH_DEV(udma) \ +#define DECLARE_ICH_DEV(mwdma, udma) \ { \ .name = DRV_NAME, \ .init_chipset = init_chipset_ich, \ .init_hwif = init_hwif_piix, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ .port_ops = &ich_port_ops, \ - .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ - .mwdma_mask = ATA_MWDMA12_ONLY, \ + .mwdma_mask = mwdma, \ .udma_mask = udma, \ } -static const struct ide_port_info piix_pci_info[] __devinitdata = { +static const struct ide_port_info piix_pci_info[] = { /* 0: MPIIX */ { /* * MPIIX actually has only a single IDE channel mapped to @@ -360,8 +353,7 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = { */ .name = DRV_NAME, .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}}, - .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA | - IDE_HFLAGS_PIIX, + .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, /* This is a painful system best to let it self tune for now */ }, @@ -370,13 +362,15 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = { /* 2: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA2), /* 3: ICH0 */ - DECLARE_ICH_DEV(ATA_UDMA2), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2), /* 4: ICH */ - DECLARE_ICH_DEV(ATA_UDMA4), + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4), /* 5: PIIX4 */ DECLARE_PIIX_DEV(ATA_UDMA4), - /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ - DECLARE_ICH_DEV(ATA_UDMA5), + /* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */ + DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5), + /* 7: ICH7/7-R, no MWDMA1 */ + DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5), }; /** @@ -388,7 +382,7 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int piix_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &piix_pci_info[id->driver_data], NULL); } @@ -400,7 +394,7 @@ static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_ * they are found, disable use of DMA IDE */ -static void __devinit piix_check_450nx(void) +static void piix_check_450nx(void) { struct pci_dev *pdev = NULL; u16 cfg; @@ -446,9 +440,9 @@ static const struct pci_device_id piix_pci_tbl[] = { #endif { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 7 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 }, { 0, }, }; diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 74625e821a4..2db803cd095 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -28,11 +28,13 @@ #include <linux/delay.h> #include <linux/ide.h> #include <linux/notifier.h> +#include <linux/module.h> #include <linux/reboot.h> #include <linux/pci.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/scatterlist.h> +#include <linux/slab.h> #include <asm/prom.h> #include <asm/io.h> @@ -43,10 +45,7 @@ #include <asm/pmac_feature.h> #include <asm/sections.h> #include <asm/irq.h> - -#ifndef CONFIG_PPC64 #include <asm/mediabay.h> -#endif #define DRV_NAME "ide-pmac" @@ -59,13 +58,14 @@ typedef struct pmac_ide_hwif { int irq; int kind; int aapl_bus_id; - unsigned mediabay : 1; unsigned broken_dma : 1; unsigned broken_dma_warn : 1; struct device_node* node; struct macio_dev *mdev; u32 timings[4]; volatile u32 __iomem * *kauai_fcr; + ide_hwif_t *hwif; + /* Those fields are duplicating what is in hwif. We currently * can't use the hwif ones because of some assumptions that are * beeing done by the generic code about the kind of dma controller @@ -404,9 +404,6 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time) #define IDE_WAKEUP_DELAY (1*HZ) static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *); -static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); -static void pmac_ide_selectproc(ide_drive_t *drive); -static void pmac_ide_kauai_selectproc(ide_drive_t *drive); #define PMAC_IDE_REG(x) \ ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) @@ -416,12 +413,10 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive); * timing register when selecting that unit. This version is for * ASICs with a single timing register */ -static void -pmac_ide_selectproc(ide_drive_t *drive) +static void pmac_ide_apply_timings(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (drive->dn & 1) writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG)); @@ -435,12 +430,10 @@ pmac_ide_selectproc(ide_drive_t *drive) * timing register when selecting that unit. This version is for * ASICs with a dual timing register (Kauai) */ -static void -pmac_ide_kauai_selectproc(ide_drive_t *drive) +static void pmac_ide_kauai_apply_timings(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (drive->dn & 1) { writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); @@ -459,15 +452,30 @@ static void pmac_ide_do_update_timings(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); if (pmif->kind == controller_sh_ata6 || pmif->kind == controller_un_ata6 || pmif->kind == controller_k2_ata6) - pmac_ide_kauai_selectproc(drive); + pmac_ide_kauai_apply_timings(drive); else - pmac_ide_selectproc(drive); + pmac_ide_apply_timings(drive); +} + +static void pmac_dev_select(ide_drive_t *drive) +{ + pmac_ide_apply_timings(drive); + + writeb(drive->select | ATA_DEVICE_OBS, + (void __iomem *)drive->hwif->io_ports.device_addr); +} + +static void pmac_kauai_dev_select(ide_drive_t *drive) +{ + pmac_ide_kauai_apply_timings(drive); + + writeb(drive->select | ATA_DEVICE_OBS, + (void __iomem *)drive->hwif->io_ports.device_addr); } static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd) @@ -477,17 +485,8 @@ static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd) + IDE_TIMING_CONFIG)); } -static void pmac_set_irq(ide_hwif_t *hwif, int on) +static void pmac_write_devctl(ide_hwif_t *hwif, u8 ctl) { - u8 ctl = ATA_DEVCTL_OBS; - - if (on == 4) { /* hack for SRST */ - ctl |= 4; - on &= ~4; - } - - ctl |= on ? 0 : 2; - writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); (void)readl((void __iomem *)(hwif->io_ports.data_addr + IDE_TIMING_CONFIG)); @@ -496,12 +495,10 @@ static void pmac_set_irq(ide_hwif_t *hwif, int on) /* * Old tuning functions (called on hdparm -p), sets up drive PIO timings */ -static void -pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void pmac_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); + const u8 pio = drive->pio_mode - XFER_PIO_0; struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); u32 *timings, t; unsigned accessTicks, recTicks; @@ -778,14 +775,13 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, #endif } -static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); int ret = 0; u32 *timings, *timings2, tl[2]; u8 unit = drive->dn & 1; + const u8 speed = drive->dma_mode; timings = &pmif->timings[unit]; timings2 = &pmif->timings[unit+2]; @@ -852,6 +848,11 @@ sanitize_timings(pmac_ide_hwif_t *pmif) pmif->timings[2] = pmif->timings[3] = value2; } +static int on_media_bay(pmac_ide_hwif_t *pmif) +{ + return pmif->mdev && pmif->mdev->media_bay != NULL; +} + /* Suspend call back, should be called after the child devices * have actually been suspended */ @@ -864,7 +865,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif) disable_irq(pmif->irq); /* The media bay will handle itself just fine */ - if (pmif->mediabay) + if (on_media_bay(pmif)) return 0; /* Kauai has bus control FCRs directly here */ @@ -887,7 +888,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif) static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) { /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */ - if (!pmif->mediabay) { + if (!on_media_bay(pmif)) { ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1); ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1); msleep(10); @@ -913,14 +914,21 @@ static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); struct device_node *np = pmif->node; const char *cable = of_get_property(np, "cable-type", NULL); + struct device_node *root = of_find_node_by_path("/"); + const char *model = of_get_property(root, "model", NULL); /* Get cable type from device-tree. */ - if (cable && !strncmp(cable, "80-", 3)) - return ATA_CBL_PATA80; + if (cable && !strncmp(cable, "80-", 3)) { + /* Some drives fail to detect 80c cable in PowerBook */ + /* These machine use proprietary short IDE cable anyway */ + if (!strncmp(model, "PowerBook", 9)) + return ATA_CBL_PATA40_SHORT; + else + return ATA_CBL_PATA80; + } /* * G5's seem to have incorrect cable type in device-tree. @@ -937,16 +945,13 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) static void pmac_ide_init_dev(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); - if (pmif->mediabay) { -#ifdef CONFIG_PMAC_MEDIABAY - if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) { + if (on_media_bay(pmif)) { + if (check_media_bay(pmif->mdev->media_bay) == MB_CD) { drive->dev_flags &= ~IDE_DFLAG_NOPROBE; return; } -#endif drive->dev_flags |= IDE_DFLAG_NOPROBE; } } @@ -955,9 +960,9 @@ static const struct ide_tp_ops pmac_tp_ops = { .exec_command = pmac_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, + .write_devctl = pmac_write_devctl, - .set_irq = pmac_set_irq, - + .dev_select = pmac_dev_select, .tf_load = ide_tf_load, .tf_read = ide_tf_read, @@ -965,19 +970,24 @@ static const struct ide_tp_ops pmac_tp_ops = { .output_data = ide_output_data, }; -static const struct ide_port_ops pmac_ide_ata6_port_ops = { - .init_dev = pmac_ide_init_dev, - .set_pio_mode = pmac_ide_set_pio_mode, - .set_dma_mode = pmac_ide_set_dma_mode, - .selectproc = pmac_ide_kauai_selectproc, - .cable_detect = pmac_ide_cable_detect, +static const struct ide_tp_ops pmac_ata6_tp_ops = { + .exec_command = pmac_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .write_devctl = pmac_write_devctl, + + .dev_select = pmac_kauai_dev_select, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, }; static const struct ide_port_ops pmac_ide_ata4_port_ops = { .init_dev = pmac_ide_init_dev, .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, - .selectproc = pmac_ide_selectproc, .cable_detect = pmac_ide_cable_detect, }; @@ -985,7 +995,6 @@ static const struct ide_port_ops pmac_ide_port_ops = { .init_dev = pmac_ide_init_dev, .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, - .selectproc = pmac_ide_selectproc, }; static const struct ide_dma_ops pmac_dma_ops; @@ -1009,28 +1018,31 @@ static const struct ide_port_info pmac_port_info = { * Setup, register & probe an IDE channel driven by this driver, this is * called by one of the 2 probe functions (macio or PCI). */ -static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) +static int pmac_ide_setup_device(pmac_ide_hwif_t *pmif, struct ide_hw *hw) { struct device_node *np = pmif->node; const int *bidp; struct ide_host *host; ide_hwif_t *hwif; - hw_regs_t *hws[] = { hw, NULL, NULL, NULL }; + struct ide_hw *hws[] = { hw }; struct ide_port_info d = pmac_port_info; int rc; pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; - d.port_ops = &pmac_ide_ata6_port_ops; + d.tp_ops = &pmac_ata6_tp_ops; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA6; } else if (of_device_is_compatible(np, "kauai-ata")) { pmif->kind = controller_un_ata6; - d.port_ops = &pmac_ide_ata6_port_ops; + d.tp_ops = &pmac_ata6_tp_ops; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA5; } else if (of_device_is_compatible(np, "K2-UATA")) { pmif->kind = controller_k2_ata6; - d.port_ops = &pmac_ide_ata6_port_ops; + d.tp_ops = &pmac_ata6_tp_ops; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA5; } else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) { @@ -1054,26 +1066,23 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) writel(KAUAI_FCR_UATA_MAGIC | KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr); - - pmif->mediabay = 0; /* Make sure we have sane timings */ sanitize_timings(pmif); - host = ide_host_alloc(&d, hws); - if (host == NULL) - return -ENOMEM; - hwif = host->ports[0]; + /* If we are on a media bay, wait for it to settle and lock it */ + if (pmif->mdev) + lock_media_bay(pmif->mdev->media_bay); -#ifndef CONFIG_PPC64 - /* XXX FIXME: Media bay stuff need re-organizing */ - if (np->parent && np->parent->name - && strcasecmp(np->parent->name, "media-bay") == 0) { -#ifdef CONFIG_PMAC_MEDIABAY - media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, - hwif); -#endif /* CONFIG_PMAC_MEDIABAY */ - pmif->mediabay = 1; + host = ide_host_alloc(&d, hws, 1); + if (host == NULL) { + rc = -ENOMEM; + goto bail; + } + hwif = pmif->hwif = host->ports[0]; + + if (on_media_bay(pmif)) { + /* Fixup bus ID for media bay */ if (!bidp) pmif->aapl_bus_id = 1; } else if (pmif->kind == controller_ohare) { @@ -1082,9 +1091,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) * units, I keep the old way */ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1); - } else -#endif - { + } else { /* This is necessary to enable IDE when net-booting */ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1); ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1); @@ -1094,20 +1101,24 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) } printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), " - "bus ID %d%s, irq %d\n", model_name[pmif->kind], - pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, - pmif->mediabay ? " (mediabay)" : "", hw->irq); + "bus ID %d%s, irq %d\n", model_name[pmif->kind], + pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, + on_media_bay(pmif) ? " (mediabay)" : "", hw->irq); rc = ide_host_register(host, &d, hws); - if (rc) { - ide_host_free(host); - return rc; - } + if (rc) + pmif->hwif = NULL; - return 0; + if (pmif->mdev) + unlock_media_bay(pmif->mdev->media_bay); + + bail: + if (rc && host) + ide_host_free(host); + return rc; } -static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base) +static void pmac_ide_init_ports(struct ide_hw *hw, unsigned long base) { int i; @@ -1120,14 +1131,14 @@ static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base) /* * Attach to a macio probed interface */ -static int __devinit -pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) +static int pmac_ide_macio_attach(struct macio_dev *mdev, + const struct of_device_id *match) { void __iomem *base; unsigned long regbase; pmac_ide_hwif_t *pmif; int irq, rc; - hw_regs_t hw; + struct ide_hw hw; pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); if (pmif == NULL) @@ -1135,7 +1146,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) if (macio_resource_count(mdev) == 0) { printk(KERN_WARNING "ide-pmac: no address for %s\n", - mdev->ofdev.node->full_name); + mdev->ofdev.dev.of_node->full_name); rc = -ENXIO; goto out_free_pmif; } @@ -1143,7 +1154,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) /* Request memory resource for IO ports */ if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) { printk(KERN_ERR "ide-pmac: can't request MMIO resource for " - "%s!\n", mdev->ofdev.node->full_name); + "%s!\n", mdev->ofdev.dev.of_node->full_name); rc = -EBUSY; goto out_free_pmif; } @@ -1155,7 +1166,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) */ if (macio_irq_count(mdev) == 0) { printk(KERN_WARNING "ide-pmac: no intrs for device %s, using " - "13\n", mdev->ofdev.node->full_name); + "13\n", mdev->ofdev.dev.of_node->full_name); irq = irq_create_mapping(NULL, 13); } else irq = macio_irq(mdev, 0); @@ -1164,7 +1175,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) regbase = (unsigned long) base; pmif->mdev = mdev; - pmif->node = mdev->ofdev.node; + pmif->node = mdev->ofdev.dev.of_node; pmif->regbase = regbase; pmif->irq = irq; pmif->kauai_fcr = NULL; @@ -1173,7 +1184,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) printk(KERN_WARNING "ide-pmac: can't request DMA " "resource for %s!\n", - mdev->ofdev.node->full_name); + mdev->ofdev.dev.of_node->full_name); else pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); } else @@ -1210,8 +1221,7 @@ out_free_pmif: static int pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev); int rc = 0; if (mesg.event != mdev->ofdev.dev.power.power_state.event @@ -1227,8 +1237,7 @@ pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) static int pmac_ide_macio_resume(struct macio_dev *mdev) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev); int rc = 0; if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) { @@ -1243,15 +1252,15 @@ pmac_ide_macio_resume(struct macio_dev *mdev) /* * Attach to a PCI probed interface */ -static int __devinit -pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) +static int pmac_ide_pci_attach(struct pci_dev *pdev, + const struct pci_device_id *id) { struct device_node *np; pmac_ide_hwif_t *pmif; void __iomem *base; unsigned long rbase, rlen; int rc; - hw_regs_t hw; + struct ide_hw hw; np = pci_device_to_OF_node(pdev); if (np == NULL) { @@ -1300,7 +1309,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) rc = pmac_ide_setup_device(pmif, &hw); if (rc != 0) { /* The inteface is released to the common IDE layer */ - pci_set_drvdata(pdev, NULL); iounmap(base); pci_release_regions(pdev); kfree(pmif); @@ -1316,7 +1324,7 @@ out_free_pmif: static int pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + pmac_ide_hwif_t *pmif = pci_get_drvdata(pdev); int rc = 0; if (mesg.event != pdev->dev.power.power_state.event @@ -1332,7 +1340,7 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) static int pmac_ide_pci_resume(struct pci_dev *pdev) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + pmac_ide_hwif_t *pmif = pci_get_drvdata(pdev); int rc = 0; if (pdev->dev.power.power_state.event != PM_EVENT_ON) { @@ -1344,6 +1352,24 @@ pmac_ide_pci_resume(struct pci_dev *pdev) return rc; } +#ifdef CONFIG_PMAC_MEDIABAY +static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state) +{ + pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev); + + switch(mb_state) { + case MB_CD: + if (!pmif->hwif->present) + ide_port_scan(pmif->hwif); + break; + default: + if (pmif->hwif->present) + ide_port_unregister_devices(pmif->hwif); + } +} +#endif /* CONFIG_PMAC_MEDIABAY */ + + static struct of_device_id pmac_ide_macio_match[] = { { @@ -1363,11 +1389,17 @@ static struct of_device_id pmac_ide_macio_match[] = static struct macio_driver pmac_ide_macio_driver = { - .name = "ide-pmac", - .match_table = pmac_ide_macio_match, + .driver = { + .name = "ide-pmac", + .owner = THIS_MODULE, + .of_match_table = pmac_ide_macio_match, + }, .probe = pmac_ide_macio_attach, .suspend = pmac_ide_macio_suspend, .resume = pmac_ide_macio_resume, +#ifdef CONFIG_PMAC_MEDIABAY + .mediabay_event = pmac_ide_macio_mb_event, +#endif }; static const struct pci_device_id pmac_ide_pci_match[] = { @@ -1422,17 +1454,15 @@ out: * pmac_ide_build_dmatable builds the DBDMA command list * for a transfer and sets the DBDMA channel to point to it. */ -static int -pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) +static int pmac_ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); struct dbdma_cmd *table; - int i, count = 0; volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; struct scatterlist *sg; - int wr = (rq_data_dir(rq) == WRITE); + int wr = !!(cmd->tf_flags & IDE_TFLAG_WRITE); + int i = cmd->sg_nents, count = 0; /* DMA table is already aligned */ table = (struct dbdma_cmd *) pmif->dma_table_cpu; @@ -1442,11 +1472,6 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) while (readl(&dma->status) & RUN) udelay(1); - hwif->sg_nents = i = ide_build_sglist(drive, rq); - - if (!i) - return 0; - /* Build DBDMA commands list */ sg = hwif->sg_table; while (i && sg_dma_len(sg)) { @@ -1462,7 +1487,7 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) "switching to PIO on Ohare chipset\n", drive->name); pmif->broken_dma_warn = 1; } - goto use_pio_instead; + return 0; } while (cur_len) { unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; @@ -1470,7 +1495,7 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) if (count++ >= MAX_DCMDS) { printk(KERN_WARNING "%s: DMA table too small\n", drive->name); - goto use_pio_instead; + return 0; } st_le16(&table->command, wr? OUTPUT_MORE: INPUT_MORE); st_le16(&table->req_count, tc); @@ -1499,9 +1524,6 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name); -use_pio_instead: - ide_destroy_dmatable(drive); - return 0; /* revert to PIO for this request */ } @@ -1509,39 +1531,26 @@ use_pio_instead: * Prepare a DMA transfer. We build the DMA table, adjust the timings for * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion */ -static int -pmac_ide_dma_setup(ide_drive_t *drive) +static int pmac_ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - struct request *rq = hwif->rq; + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4); + u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE); - if (!pmac_ide_build_dmatable(drive, rq)) { - ide_map_sg(drive, rq); + if (pmac_ide_build_dmatable(drive, cmd) == 0) return 1; - } /* Apple adds 60ns to wrDataSetup on reads */ if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) { - writel(pmif->timings[unit] + (!rq_data_dir(rq) ? 0x00800000UL : 0), + writel(pmif->timings[unit] + (write ? 0 : 0x00800000UL), PMAC_IDE_REG(IDE_TIMING_CONFIG)); (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG)); } - drive->waiting_for_dma = 1; - return 0; } -static void -pmac_ide_dma_exec_cmd(ide_drive_t *drive, u8 command) -{ - /* issue cmd to drive */ - ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, NULL); -} - /* * Kick the DMA controller into life after the DMA command has been issued * to the drive. @@ -1550,8 +1559,7 @@ static void pmac_ide_dma_start(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma; dma = pmif->dma_regs; @@ -1568,17 +1576,13 @@ static int pmac_ide_dma_end (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; u32 dstat; - drive->waiting_for_dma = 0; dstat = readl(&dma->status); writel(((RUN|WAKE|DEAD) << 16), &dma->control); - ide_destroy_dmatable(drive); - /* verify good dma status. we don't check for ACTIVE beeing 0. We should... * in theory, but with ATAPI decices doing buffer underruns, that would * cause us to disable DMA, which isn't what we want @@ -1596,8 +1600,7 @@ static int pmac_ide_dma_test_irq (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; unsigned long status, timeout; @@ -1635,8 +1638,8 @@ pmac_ide_dma_test_irq (ide_drive_t *drive) if ((status & FLUSH) == 0) break; if (++timeout > 100) { - printk(KERN_WARNING "ide%d, ide_dma_test_irq \ - timeout flushing channel\n", hwif->index); + printk(KERN_WARNING "ide%d, ide_dma_test_irq timeout flushing channel\n", + hwif->index); break; } } @@ -1651,8 +1654,7 @@ static void pmac_ide_dma_lost_irq (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; unsigned long status = readl(&dma->status); @@ -1662,11 +1664,9 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive) static const struct ide_dma_ops pmac_dma_ops = { .dma_host_set = pmac_ide_dma_host_set, .dma_setup = pmac_ide_dma_setup, - .dma_exec_cmd = pmac_ide_dma_exec_cmd, .dma_start = pmac_ide_dma_start, .dma_end = pmac_ide_dma_end, .dma_test_irq = pmac_ide_dma_test_irq, - .dma_timeout = ide_dma_timeout, .dma_lost_irq = pmac_ide_dma_lost_irq, }; @@ -1674,11 +1674,9 @@ static const struct ide_dma_ops pmac_dma_ops = { * Allocate the data structures needed for using DMA with an interface * and fill the proper list of functions pointers */ -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int pmac_ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent); struct pci_dev *dev = to_pci_dev(hwif->dev); /* We won't need pci_dev if we switch to generic consistent @@ -1691,7 +1689,7 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, * The +2 is +1 for the stop command and +1 to allow for * aligning the start address to a multiple of 16 bytes. */ - pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent( + pmif->dma_table_cpu = pci_alloc_consistent( dev, (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd), &hwif->dmatable_dma); diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c index 9f9c0b3cc3a..ecd0a69245f 100644 --- a/drivers/ide/q40ide.c +++ b/drivers/ide/q40ide.c @@ -15,6 +15,9 @@ #include <linux/interrupt.h> #include <linux/blkdev.h> #include <linux/ide.h> +#include <linux/module.h> + +#include <asm/ide.h> /* * Bases of the IDE interfaces @@ -49,11 +52,9 @@ static int q40ide_default_irq(unsigned long base) /* * Addresses are pretranslated for Q40 ISA access. */ -static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base, - ide_ack_intr_t *ack_intr, - int irq) +static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq) { - memset(hw, 0, sizeof(hw_regs_t)); + memset(hw, 0, sizeof(*hw)); /* BIG FAT WARNING: assumption: only DATA port is ever used in 16 bit mode */ hw->io_ports.data_addr = Q40_ISA_IO_W(base); @@ -67,31 +68,32 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base, hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206); hw->irq = irq; - hw->ack_intr = ack_intr; - - hw->chipset = ide_generic; } -static void q40ide_input_data(ide_drive_t *drive, struct request *rq, +static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long data_addr = drive->hwif->io_ports.data_addr; - if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS) - return insw(data_addr, buf, (len + 1) / 2); + if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { + __ide_mm_insw(data_addr, buf, (len + 1) / 2); + return; + } - insw_swapw(data_addr, buf, (len + 1) / 2); + raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } -static void q40ide_output_data(ide_drive_t *drive, struct request *rq, +static void q40ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long data_addr = drive->hwif->io_ports.data_addr; - if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS) - return outsw(data_addr, buf, (len + 1) / 2); + if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { + __ide_mm_outsw(data_addr, buf, (len + 1) / 2); + return; + } - outsw_swapw(data_addr, buf, (len + 1) / 2); + raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } /* Q40 has a byte-swapped IDE interface */ @@ -99,9 +101,9 @@ static const struct ide_tp_ops q40ide_tp_ops = { .exec_command = ide_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, - .set_irq = ide_set_irq, - + .dev_select = ide_dev_select, .tf_load = ide_tf_load, .tf_read = ide_tf_read, @@ -111,7 +113,9 @@ static const struct ide_tp_ops q40ide_tp_ops = { static const struct ide_port_info q40ide_port_info = { .tp_ops = &q40ide_tp_ops, - .host_flags = IDE_HFLAG_NO_DMA, + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, + .irq_flags = IRQF_SHARED, + .chipset = ide_generic, }; /* @@ -129,7 +133,7 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={ static int __init q40ide_init(void) { int i; - hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL }; + struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL }; if (!MACH_IS_Q40) return -ENODEV; @@ -150,13 +154,13 @@ static int __init q40ide_init(void) release_region(pcide_bases[i], 8); continue; } - q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL, + q40_ide_setup_ports(&hw[i], pcide_bases[i], q40ide_default_irq(pcide_bases[i])); hws[i] = &hw[i]; } - return ide_host_add(&q40ide_port_info, hws, NULL); + return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL); } module_init(q40ide_init); diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 5b2e3af43c4..a6fb6a894c7 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c @@ -16,7 +16,7 @@ /* * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by - * Samuel Thibault <samuel.thibault@fnac.net> + * Samuel Thibault <samuel.thibault@ens-lyon.org> */ #include <linux/module.h> @@ -29,7 +29,6 @@ #include <linux/blkdev.h> #include <linux/ide.h> #include <linux/init.h> -#include <asm/system.h> #include <asm/io.h> #define DRV_NAME "qd65xx" @@ -90,13 +89,15 @@ static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */ * This routine is invoked to prepare for access to a given drive. */ -static void qd65xx_select(ide_drive_t *drive) +static void qd65xx_dev_select(ide_drive_t *drive) { u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) | (QD_TIMREG(drive) & 0x02); if (timings[index] != QD_TIMING(drive)) outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive)); + + outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr); } /* @@ -178,21 +179,22 @@ static int qd_find_disk_type (ide_drive_t *drive, static void qd_set_timing (ide_drive_t *drive, u8 timing) { - drive->drive_data &= 0xff00; - drive->drive_data |= timing; + unsigned long data = (unsigned long)ide_get_drivedata(drive); + + data &= 0xff00; + data |= timing; + ide_set_drivedata(drive, (void *)data); printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); } -static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void qd6500_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { u16 *id = drive->id; int active_time = 175; int recovery_time = 415; /* worst case values from the dos driver */ - /* - * FIXME: use "pio" value - */ + /* FIXME: use drive->pio_mode value */ if (!qd_find_disk_type(drive, &active_time, &recovery_time) && (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) && id[ATA_ID_EIDE_PIO] >= 240) { @@ -206,9 +208,9 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) active_time, recovery_time)); } -static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void qd6580_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + const u8 pio = drive->pio_mode - XFER_PIO_0; struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cycle_time; int active_time = 175; @@ -290,7 +292,7 @@ static void __init qd6500_init_dev(ide_drive_t *drive) u8 base = (hwif->config_data & 0xff00) >> 8; u8 config = QD_CONFIG(hwif); - drive->drive_data = QD6500_DEF_DATA; + ide_set_drivedata(drive, (void *)QD6500_DEF_DATA); } static void __init qd6580_init_dev(ide_drive_t *drive) @@ -306,23 +308,36 @@ static void __init qd6580_init_dev(ide_drive_t *drive) } else t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA; - drive->drive_data = (drive->dn & 1) ? t2 : t1; + ide_set_drivedata(drive, (void *)((drive->dn & 1) ? t2 : t1)); } +static const struct ide_tp_ops qd65xx_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, + + .dev_select = qd65xx_dev_select, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; + static const struct ide_port_ops qd6500_port_ops = { .init_dev = qd6500_init_dev, .set_pio_mode = qd6500_set_pio_mode, - .selectproc = qd65xx_select, }; static const struct ide_port_ops qd6580_port_ops = { .init_dev = qd6580_init_dev, .set_pio_mode = qd6580_set_pio_mode, - .selectproc = qd65xx_select, }; -static const struct ide_port_info qd65xx_port_info __initdata = { +static const struct ide_port_info qd65xx_port_info __initconst = { .name = DRV_NAME, + .tp_ops = &qd65xx_tp_ops, .chipset = ide_qd65xx, .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_NO_DMA, @@ -401,7 +416,7 @@ static int __init qd_probe(int base) return rc; } -static int probe_qd65xx; +static bool probe_qd65xx; module_param_named(probe, probe_qd65xx, bool, 0); MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); diff --git a/drivers/ide/qd65xx.h b/drivers/ide/qd65xx.h index 6636f9665d1..1fba2a5f281 100644 --- a/drivers/ide/qd65xx.h +++ b/drivers/ide/qd65xx.h @@ -4,7 +4,7 @@ /* * Authors: Petr Soucek <petr@ryston.cz> - * Samuel Thibault <samuel.thibault@fnac.net> + * Samuel Thibault <samuel.thibault@ens-lyon.org> */ /* truncates a in [b,c] */ @@ -31,8 +31,15 @@ #define QD_CONFIG(hwif) ((hwif)->config_data & 0x00ff) -#define QD_TIMING(drive) (u8)(((drive)->drive_data) & 0x00ff) -#define QD_TIMREG(drive) (u8)((((drive)->drive_data) & 0xff00) >> 8) +static inline u8 QD_TIMING(ide_drive_t *drive) +{ + return (unsigned long)ide_get_drivedata(drive) & 0x00ff; +} + +static inline u8 QD_TIMREG(ide_drive_t *drive) +{ + return ((unsigned long)ide_get_drivedata(drive) & 0xff00) >> 8; +} #define QD6500_DEF_DATA ((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0c : 0x08)) #define QD6580_DEF_DATA ((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0a : 0x00)) diff --git a/drivers/ide/rapide.c b/drivers/ide/rapide.c index d5003ca6980..d73c3d10087 100644 --- a/drivers/ide/rapide.c +++ b/drivers/ide/rapide.c @@ -3,7 +3,6 @@ */ #include <linux/module.h> -#include <linux/slab.h> #include <linux/blkdev.h> #include <linux/errno.h> #include <linux/ide.h> @@ -13,9 +12,10 @@ static const struct ide_port_info rapide_port_info = { .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, + .chipset = ide_generic, }; -static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base, +static void rapide_setup_ports(struct ide_hw *hw, void __iomem *base, void __iomem *ctrl, unsigned int sz, int irq) { unsigned long port = (unsigned long)base; @@ -29,13 +29,12 @@ static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base, hw->irq = irq; } -static int __devinit -rapide_probe(struct expansion_card *ec, const struct ecard_id *id) +static int rapide_probe(struct expansion_card *ec, const struct ecard_id *id) { void __iomem *base; struct ide_host *host; int ret; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; ret = ecard_request_resources(ec); if (ret) @@ -49,10 +48,9 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) memset(&hw, 0, sizeof(hw)); rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); - hw.chipset = ide_generic; hw.dev = &ec->dev; - ret = ide_host_add(&rapide_port_info, hws, &host); + ret = ide_host_add(&rapide_port_info, hws, 1, &host); if (ret) goto release; @@ -65,7 +63,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) return ret; } -static void __devexit rapide_remove(struct expansion_card *ec) +static void rapide_remove(struct expansion_card *ec) { struct ide_host *host = ecard_get_drvdata(ec); @@ -83,7 +81,7 @@ static struct ecard_id rapide_ids[] = { static struct ecard_driver rapide_driver = { .probe = rapide_probe, - .remove = __devexit_p(rapide_remove), + .remove = rapide_remove, .id_table = rapide_ids, .drv = { .name = "rapide", diff --git a/drivers/ide/rz1000.c b/drivers/ide/rz1000.c index a6414a884eb..f4b66f7ec9f 100644 --- a/drivers/ide/rz1000.c +++ b/drivers/ide/rz1000.c @@ -22,7 +22,7 @@ #define DRV_NAME "rz1000" -static int __devinit rz1000_disable_readahead(struct pci_dev *dev) +static int rz1000_disable_readahead(struct pci_dev *dev) { u16 reg; @@ -38,12 +38,12 @@ static int __devinit rz1000_disable_readahead(struct pci_dev *dev) } } -static const struct ide_port_info rz1000_chipset __devinitdata = { +static const struct ide_port_info rz1000_chipset = { .name = DRV_NAME, .host_flags = IDE_HFLAG_NO_DMA, }; -static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d = rz1000_chipset; int rc; diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c index dbdd2985a0d..a5b70181840 100644 --- a/drivers/ide/sc1200.c +++ b/drivers/ide/sc1200.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> @@ -115,21 +116,20 @@ static u8 sc1200_udma_filter(ide_drive_t *drive) if ((mateid[ATA_ID_FIELD_VALID] & 4) && (mateid[ATA_ID_UDMA_MODES] & 7)) goto out; - if ((mateid[ATA_ID_FIELD_VALID] & 2) && - (mateid[ATA_ID_MWDMA_MODES] & 7)) + if (mateid[ATA_ID_MWDMA_MODES] & 7) mask = 0; } out: return mask; } -static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void sc1200_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned int reg, timings; unsigned short pci_clock; unsigned int basereg = hwif->channel ? 0x50 : 0x40; + const u8 mode = drive->dma_mode; static const u32 udma_timing[3][3] = { { 0x00921250, 0x00911140, 0x00911030 }, @@ -183,9 +183,6 @@ static int sc1200_dma_end(ide_drive_t *drive) outb(dma_stat|0x1b, dma_base+2); /* clear the INTR & ERROR bits */ outb(inb(dma_base)&~1, dma_base); /* !! DO THIS HERE !! stop DMA */ - drive->waiting_for_dma = 0; - ide_destroy_dmatable(drive); /* purge DMA mappings */ - return (dma_stat & 7) != 4; /* verify good DMA status */ } @@ -197,10 +194,10 @@ static int sc1200_dma_end(ide_drive_t *drive) * will have valid default PIO timings set up before we get here. */ -static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void sc1200_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; int mode = -1; + const u8 pio = drive->pio_mode - XFER_PIO_0; /* * bad abuse of ->set_pio_mode interface @@ -286,16 +283,15 @@ static const struct ide_port_ops sc1200_port_ops = { static const struct ide_dma_ops sc1200_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, .dma_end = sc1200_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info sc1200_chipset __devinitdata = { +static const struct ide_port_info sc1200_chipset = { .name = DRV_NAME, .port_ops = &sc1200_port_ops, .dma_ops = &sc1200_dma_ops, @@ -307,7 +303,7 @@ static const struct ide_port_info sc1200_chipset __devinitdata = { .udma_mask = ATA_UDMA2, }; -static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct sc1200_saved_state *ss = NULL; int rc; diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 8d2314b6327..2a2d188b5d5 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -148,17 +148,8 @@ static u8 scc_dma_sff_read_status(ide_hwif_t *hwif) return (u8)in_be32((void *)(hwif->dma_base + 4)); } -static void scc_set_irq(ide_hwif_t *hwif, int on) +static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl) { - u8 ctl = ATA_DEVCTL_OBS; - - if (on == 4) { /* hack for SRST */ - ctl |= 4; - on &= ~4; - } - - ctl |= on ? 0 : 2; - out_be32((void *)hwif->io_ports.ctl_addr, ctl); eieio(); in_be32((void *)(hwif->dma_base + 0x01c)); @@ -208,16 +199,15 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count) /** * scc_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Load the timing settings for this device mode into the * controller. */ -static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct scc_ports *ports = ide_get_hwifdata(hwif); unsigned long ctl_base = ports->ctl; unsigned long cckctrl_port = ctl_base + 0xff0; @@ -225,6 +215,7 @@ static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) unsigned long pioct_port = ctl_base + 0x004; unsigned long reg; int offset; + const u8 pio = drive->pio_mode - XFER_PIO_0; reg = in_be32((void __iomem *)cckctrl_port); if (reg & CCKCTRL_ATACLKOEN) { @@ -240,16 +231,15 @@ static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) /** * scc_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Load the timing settings for this device mode into the * controller. */ -static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct scc_ports *ports = ide_get_hwifdata(hwif); unsigned long ctl_base = ports->ctl; unsigned long cckctrl_port = ctl_base + 0xff0; @@ -263,6 +253,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) int offset, idx; unsigned long reg; unsigned long jcactsel; + const u8 speed = drive->dma_mode; reg = in_be32((void __iomem *)cckctrl_port); if (reg & CCKCTRL_ATACLKOEN) { @@ -303,8 +294,9 @@ static void scc_dma_host_set(ide_drive_t *drive, int on) } /** - * scc_ide_dma_setup - begin a DMA phase + * scc_dma_setup - begin a DMA phase * @drive: target device + * @cmd: command * * Build an IDE DMA PRD (IDE speak for scatter gather table) * and then set up the DMA transfer registers. @@ -313,36 +305,28 @@ static void scc_dma_host_set(ide_drive_t *drive, int on) * is returned. */ -static int scc_dma_setup(ide_drive_t *drive) +static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->rq; - unsigned int reading; + u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR; u8 dma_stat; - if (rq_data_dir(rq)) - reading = 0; - else - reading = 1 << 3; - /* fall back to pio! */ - if (!ide_build_dmatable(drive, rq)) { - ide_map_sg(drive, rq); + if (ide_build_dmatable(drive, cmd) == 0) return 1; - } /* PRD table */ out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); /* specify r/w */ - out_be32((void __iomem *)hwif->dma_base, reading); + out_be32((void __iomem *)hwif->dma_base, rw); /* read DMA status for INTR & ERROR flags */ dma_stat = scc_dma_sff_read_status(hwif); /* clear INTR & ERROR flags */ out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); - drive->waiting_for_dma = 1; + return 0; } @@ -353,7 +337,6 @@ static void scc_dma_start(ide_drive_t *drive) /* start DMA */ scc_ide_outb(dma_cmd | 1, hwif->dma_base); - wmb(); } static int __scc_dma_end(ide_drive_t *drive) @@ -361,7 +344,6 @@ static int __scc_dma_end(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; u8 dma_stat, dma_cmd; - drive->waiting_for_dma = 0; /* get DMA command mode */ dma_cmd = scc_ide_inb(hwif->dma_base); /* stop DMA */ @@ -370,10 +352,7 @@ static int __scc_dma_end(ide_drive_t *drive) dma_stat = scc_dma_sff_read_status(hwif); /* clear the INTR & ERROR bits */ scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); - /* purge DMA mappings */ - ide_destroy_dmatable(drive); /* verify good DMA status */ - wmb(); return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; } @@ -580,7 +559,7 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, { struct scc_ports *ports = pci_get_drvdata(dev); struct ide_host *host; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; int i, rc; memset(&hw, 0, sizeof(hw)); @@ -588,9 +567,8 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; hw.irq = dev->irq; hw.dev = &dev->dev; - hw.chipset = ide_pci; - rc = ide_host_add(d, hws, &host); + rc = ide_host_add(d, hws, 1, &host); if (rc) return rc; @@ -607,8 +585,7 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, * Perform the initial set up for this device. */ -static int __devinit init_setup_scc(struct pci_dev *dev, - const struct ide_port_info *d) +static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d) { unsigned long ctl_base; unsigned long dma_base; @@ -666,91 +643,43 @@ static int __devinit init_setup_scc(struct pci_dev *dev, return rc; } -static void scc_tf_load(ide_drive_t *drive, ide_task_t *task) +static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (task->tf_flags & IDE_TFLAG_FLAGGED) - HIHI = 0xFF; - - if (task->tf_flags & IDE_TFLAG_OUT_DATA) - out_be32((void *)io_ports->data_addr, - (tf->hob_data << 8) | tf->data); - - if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - scc_ide_outb(tf->hob_feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) + + if (valid & IDE_VALID_FEATURE) scc_ide_outb(tf->feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_NSECT) + if (valid & IDE_VALID_NSECT) scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAL) + if (valid & IDE_VALID_LBAL) scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAM) + if (valid & IDE_VALID_LBAM) scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAH) + if (valid & IDE_VALID_LBAH) scc_ide_outb(tf->lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - scc_ide_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); + if (valid & IDE_VALID_DEVICE) + scc_ide_outb(tf->device, io_ports->device_addr); } -static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) +static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data = (u16)in_be32((void *)io_ports->data_addr); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = scc_ide_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) + if (valid & IDE_VALID_ERROR) + tf->error = scc_ide_inb(io_ports->feature_addr); + if (valid & IDE_VALID_NSECT) tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) + if (valid & IDE_VALID_LBAL) tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) + if (valid & IDE_VALID_LBAM) tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) + if (valid & IDE_VALID_LBAH) tf->lbah = scc_ide_inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + if (valid & IDE_VALID_DEVICE) tf->device = scc_ide_inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = scc_ide_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr); - } } -static void scc_input_data(ide_drive_t *drive, struct request *rq, +static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long data_addr = drive->hwif->io_ports.data_addr; @@ -766,7 +695,7 @@ static void scc_input_data(ide_drive_t *drive, struct request *rq, scc_ide_insw(data_addr, buf, len / 2); } -static void scc_output_data(ide_drive_t *drive, struct request *rq, +static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long data_addr = drive->hwif->io_ports.data_addr; @@ -788,7 +717,7 @@ static void scc_output_data(ide_drive_t *drive, struct request *rq, * */ -static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) +static void init_mmio_iops_scc(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct scc_ports *ports = pci_get_drvdata(dev); @@ -808,7 +737,7 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) * and then do the MMIO setup. */ -static void __devinit init_iops_scc(ide_hwif_t *hwif) +static void init_iops_scc(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -818,8 +747,7 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif) init_mmio_iops_scc(hwif); } -static int __devinit scc_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) +static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { return ide_allocate_dma_engine(hwif); } @@ -838,7 +766,7 @@ static u8 scc_cable_detect(ide_hwif_t *hwif) * ide DMA handlers appropriately. */ -static void __devinit init_hwif_scc(ide_hwif_t *hwif) +static void init_hwif_scc(ide_hwif_t *hwif) { /* PTERADD */ out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); @@ -853,9 +781,9 @@ static const struct ide_tp_ops scc_tp_ops = { .exec_command = scc_exec_command, .read_status = scc_read_status, .read_altstatus = scc_read_altstatus, + .write_devctl = scc_write_devctl, - .set_irq = scc_set_irq, - + .dev_select = ide_dev_select, .tf_load = scc_tf_load, .tf_read = scc_tf_read, @@ -873,30 +801,26 @@ static const struct ide_port_ops scc_port_ops = { static const struct ide_dma_ops scc_dma_ops = { .dma_host_set = scc_dma_host_set, .dma_setup = scc_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = scc_dma_start, .dma_end = scc_dma_end, .dma_test_irq = scc_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = scc_dma_sff_read_status, }; -#define DECLARE_SCC_DEV(name_str) \ - { \ - .name = name_str, \ - .init_iops = init_iops_scc, \ - .init_dma = scc_init_dma, \ - .init_hwif = init_hwif_scc, \ - .tp_ops = &scc_tp_ops, \ - .port_ops = &scc_port_ops, \ - .dma_ops = &scc_dma_ops, \ - .host_flags = IDE_HFLAG_SINGLE, \ - .pio_mask = ATA_PIO4, \ - } - -static const struct ide_port_info scc_chipsets[] __devinitdata = { - /* 0 */ DECLARE_SCC_DEV("sccIDE"), +static const struct ide_port_info scc_chipset = { + .name = "sccIDE", + .init_iops = init_iops_scc, + .init_dma = scc_init_dma, + .init_hwif = init_hwif_scc, + .tp_ops = &scc_tp_ops, + .port_ops = &scc_port_ops, + .dma_ops = &scc_dma_ops, + .host_flags = IDE_HFLAG_SINGLE, + .irq_flags = IRQF_SHARED, + .pio_mask = ATA_PIO4, + .chipset = ide_pci, }; /** @@ -908,9 +832,9 @@ static const struct ide_port_info scc_chipsets[] __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return init_setup_scc(dev, &scc_chipsets[id->driver_data]); + return init_setup_scc(dev, &scc_chipset); } /** @@ -920,7 +844,7 @@ static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_i * Called by the PCI code when it removes an SCC PATA controller. */ -static void __devexit scc_remove(struct pci_dev *dev) +static void scc_remove(struct pci_dev *dev) { struct scc_ports *ports = pci_get_drvdata(dev); struct ide_host *host = ports->host; @@ -943,23 +867,21 @@ static struct pci_driver scc_pci_driver = { .name = "SCC IDE", .id_table = scc_pci_tbl, .probe = scc_init_one, - .remove = __devexit_p(scc_remove), + .remove = scc_remove, }; -static int scc_ide_init(void) +static int __init scc_ide_init(void) { return ide_pci_register_driver(&scc_pci_driver); } -module_init(scc_ide_init); -/* -- No exit code? -static void scc_ide_exit(void) +static void __exit scc_ide_exit(void) { - ide_pci_unregister_driver(&scc_pci_driver); + pci_unregister_driver(&scc_pci_driver); } -module_exit(scc_ide_exit); - */ +module_init(scc_ide_init); +module_exit(scc_ide_exit); MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c index 382102ba467..a97affca18a 100644 --- a/drivers/ide/serverworks.c +++ b/drivers/ide/serverworks.c @@ -2,7 +2,7 @@ * Copyright (C) 1998-2000 Michel Aubry * Copyright (C) 1998-2000 Andrzej Krzysztofowicz * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz * Portions copyright (c) 2001 Sun Microsystems * * @@ -52,8 +52,6 @@ static const char *svwks_bad_ata100[] = { NULL }; -static struct pci_dev *isa_dev; - static int check_in_drive_lists (ide_drive_t *drive, const char **list) { char *m = (char *)&drive->id[ATA_ID_PROD]; @@ -67,26 +65,14 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list) static u8 svwks_udma_filter(ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - u8 mask = 0; - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) + if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) { return 0x1f; - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - u32 reg = 0; - if (isa_dev) - pci_read_config_dword(isa_dev, 0x64, ®); - - /* - * Don't enable UDMA on disk devices for the moment - */ - if(drive->media == ide_disk) - return 0; - /* Check the OSB4 DMA33 enable bit */ - return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0; } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) { return 0x07; - } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) { - u8 btr = 0, mode; + } else { + u8 btr = 0, mode, mask; + pci_read_config_byte(dev, 0x5A, &btr); mode = btr & 0x3; @@ -101,13 +87,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive) case 1: mask = 0x07; break; default: mask = 0x00; break; } - } - if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || - (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && - (!(PCI_FUNC(dev->devfn) & 1))) - mask = 0x1f; - return mask; + return mask; + } } static u8 svwks_csb_check (struct pci_dev *dev) @@ -124,12 +106,13 @@ static u8 svwks_csb_check (struct pci_dev *dev) return 0; } -static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void svwks_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + struct pci_dev *dev = to_pci_dev(hwif->dev); + const u8 pio = drive->pio_mode - XFER_PIO_0; pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]); @@ -145,14 +128,14 @@ static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) } } -static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void svwks_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; static const u8 dma_modes[] = { 0x77, 0x21, 0x20 }; static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 }; - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); + const u8 speed = drive->dma_mode; u8 unit = drive->dn & 1; u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0; @@ -175,7 +158,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x54, ultra_enable); } -static unsigned int init_chipset_svwks(struct pci_dev *dev) +static int init_chipset_svwks(struct pci_dev *dev) { unsigned int reg; u8 btr; @@ -185,8 +168,9 @@ static unsigned int init_chipset_svwks(struct pci_dev *dev) /* OSB4 : South Bridge and IDE */ if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, - PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); + struct pci_dev *isa_dev = + pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); if (isa_dev) { pci_read_config_dword(isa_dev, 0x64, ®); reg &= ~0x00002000; /* disable 600ns interrupt mask */ @@ -195,6 +179,7 @@ static unsigned int init_chipset_svwks(struct pci_dev *dev) "enabled.\n", pci_name(dev)); reg |= 0x00004000; /* enable UDMA/33 support */ pci_write_config_dword(isa_dev, 0x64, reg); + pci_dev_put(isa_dev); } } @@ -270,7 +255,7 @@ static unsigned int init_chipset_svwks(struct pci_dev *dev) pci_write_config_byte(dev, 0x5A, btr); } - return dev->irq; + return 0; } static u8 ata66_svwks_svwks(ide_hwif_t *hwif) @@ -343,7 +328,6 @@ static u8 svwks_cable_detect(ide_hwif_t *hwif) static const struct ide_port_ops osb4_port_ops = { .set_pio_mode = svwks_set_pio_mode, .set_dma_mode = svwks_set_dma_mode, - .udma_filter = svwks_udma_filter, }; static const struct ide_port_ops svwks_port_ops = { @@ -353,14 +337,11 @@ static const struct ide_port_ops svwks_port_ops = { .cable_detect = svwks_cable_detect, }; -#define IDE_HFLAGS_SVWKS IDE_HFLAG_LEGACY_IRQS - -static const struct ide_port_info serverworks_chipsets[] __devinitdata = { +static const struct ide_port_info serverworks_chipsets[] = { { /* 0: OSB4 */ .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &osb4_port_ops, - .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = 0x00, /* UDMA is problematic on OSB4 */ @@ -369,7 +350,6 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -378,7 +358,6 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -387,7 +366,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, + .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -396,7 +375,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, + .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -412,7 +391,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { * finds a device matching our IDE device tables. */ -static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d; u8 idx = id->driver_data; @@ -465,6 +444,6 @@ static void __exit svwks_ide_exit(void) module_init(svwks_ide_init); module_exit(svwks_ide_exit); -MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick"); +MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index e85d1ed29c2..34a5e5223d5 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -1,13 +1,14 @@ /* * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 1995-1998 Mark Lord - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2009 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License */ #include <linux/types.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -208,7 +209,7 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) * a DMA mask field to the struct ide_port_info if we need it * (or let lower level driver set the DMA mask) */ - ret = pci_set_dma_mask(dev, DMA_32BIT_MASK); + ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32)); if (ret < 0) { printk(KERN_ERR "%s %s: can't set DMA mask\n", d->name, pci_name(dev)); @@ -301,12 +302,11 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * } /** - * ide_hw_configure - configure a hw_regs_t instance + * ide_hw_configure - configure a struct ide_hw instance * @dev: PCI device holding interface * @d: IDE port info * @port: port number - * @irq: PCI IRQ - * @hw: hw_regs_t instance corresponding to this port + * @hw: struct ide_hw instance corresponding to this port * * Perform the initial set up for the hardware interface structure. This * is done per interface port rather than per PCI device. There may be @@ -316,7 +316,7 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * */ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, - unsigned int port, int irq, hw_regs_t *hw) + unsigned int port, struct ide_hw *hw) { unsigned long ctl = 0, base = 0; @@ -344,9 +344,7 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, } memset(hw, 0, sizeof(*hw)); - hw->irq = irq; hw->dev = &dev->dev; - hw->chipset = d->chipset ? d->chipset : ide_pci; ide_std_init_ports(hw, base, ctl | 2); return 0; @@ -448,9 +446,8 @@ out: * ide_pci_setup_ports - configure ports/devices on PCI IDE * @dev: PCI device * @d: IDE port info - * @pciirq: IRQ line - * @hw: hw_regs_t instances corresponding to this PCI IDE device - * @hws: hw_regs_t pointers table to update + * @hw: struct ide_hw instances corresponding to this PCI IDE device + * @hws: struct ide_hw pointers table to update * * Scan the interfaces attached to this device and do any * necessary per port setup. Attach the devices and ask the @@ -462,7 +459,7 @@ out: */ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, - int pciirq, hw_regs_t *hw, hw_regs_t **hws) + struct ide_hw *hw, struct ide_hw **hws) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; u8 tmp; @@ -481,7 +478,7 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, continue; /* port not enabled */ } - if (ide_hw_configure(dev, d, port, pciirq, hw + port)) + if (ide_hw_configure(dev, d, port, hw + port)) continue; *(hws + port) = hw + port; @@ -524,7 +521,7 @@ static int do_ide_setup_pci_device(struct pci_dev *dev, if (noisy) printk(KERN_INFO "%s %s: not 100%% native mode: will " "probe irqs later\n", d->name, pci_name(dev)); - pciirq = ret; + pciirq = 0; } else if (!pciirq && noisy) { printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n", d->name, pci_name(dev), pciirq); @@ -538,77 +535,40 @@ out: return ret; } -int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d, - void *priv) -{ - struct ide_host *host; - hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; - int ret; - - ret = ide_setup_pci_controller(dev, d, 1); - if (ret < 0) - goto out; - - ide_pci_setup_ports(dev, d, 0, &hw[0], &hws[0]); - - host = ide_host_alloc(d, hws); - if (host == NULL) { - ret = -ENOMEM; - goto out; - } - - host->dev[0] = &dev->dev; - - host->host_priv = priv; - - pci_set_drvdata(dev, host); - - ret = do_ide_setup_pci_device(dev, d, 1); - if (ret < 0) - goto out; - - /* fixup IRQ */ - hw[1].irq = hw[0].irq = ret; - - ret = ide_host_register(host, d, hws); - if (ret) - ide_host_free(host); -out: - return ret; -} -EXPORT_SYMBOL_GPL(ide_pci_init_one); - int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2, const struct ide_port_info *d, void *priv) { struct pci_dev *pdev[] = { dev1, dev2 }; struct ide_host *host; - int ret, i; - hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; + int ret, i, n_ports = dev2 ? 4 : 2; + struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL }; - for (i = 0; i < 2; i++) { + for (i = 0; i < n_ports / 2; i++) { ret = ide_setup_pci_controller(pdev[i], d, !i); if (ret < 0) goto out; - ide_pci_setup_ports(pdev[i], d, 0, &hw[i*2], &hws[i*2]); + ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]); } - host = ide_host_alloc(d, hws); + host = ide_host_alloc(d, hws, n_ports); if (host == NULL) { ret = -ENOMEM; goto out; } host->dev[0] = &dev1->dev; - host->dev[1] = &dev2->dev; + if (dev2) + host->dev[1] = &dev2->dev; host->host_priv = priv; + host->irq_flags = IRQF_SHARED; pci_set_drvdata(pdev[0], host); - pci_set_drvdata(pdev[1], host); + if (dev2) + pci_set_drvdata(pdev[1], host); - for (i = 0; i < 2; i++) { + for (i = 0; i < n_ports / 2; i++) { ret = do_ide_setup_pci_device(pdev[i], d, !i); /* @@ -619,7 +579,11 @@ int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2, goto out; /* fixup IRQ */ - hw[i*2 + 1].irq = hw[i*2].irq = ret; + if (ide_pci_is_in_compatibility_mode(pdev[i])) { + hw[i*2].irq = pci_get_legacy_ide_irq(pdev[i], 0); + hw[i*2 + 1].irq = pci_get_legacy_ide_irq(pdev[i], 1); + } else + hw[i*2 + 1].irq = hw[i*2].irq = ret; } ret = ide_host_register(host, d, hws); @@ -630,6 +594,13 @@ out: } EXPORT_SYMBOL_GPL(ide_pci_init_two); +int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d, + void *priv) +{ + return ide_pci_init_two(dev, NULL, d, priv); +} +EXPORT_SYMBOL_GPL(ide_pci_init_one); + void ide_pci_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c index fdb9d703769..63761db6138 100644 --- a/drivers/ide/sgiioc4.c +++ b/drivers/ide/sgiioc4.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. - * Copyright (C) 2008 MontaVista Software, Inc. + * Copyright (C) 2008-2009 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -29,8 +29,7 @@ #include <linux/blkdev.h> #include <linux/scatterlist.h> #include <linux/ioc4.h> -#include <asm/io.h> - +#include <linux/io.h> #include <linux/ide.h> #define DRV_NAME "SGIIOC4" @@ -72,7 +71,7 @@ #define IOC4_CMD_CTL_BLK_SIZE 0x20 #define IOC4_SUPPORTED_FIRMWARE_REV 46 -typedef struct { +struct ioc4_dma_regs { u32 timing_reg0; u32 timing_reg1; u32 low_mem_ptr; @@ -82,17 +81,18 @@ typedef struct { u32 dev_byte_count; u32 mem_byte_count; u32 status; -} ioc4_dma_regs_t; +}; /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */ /* IOC4 has only 1 IDE channel */ -#define IOC4_PRD_BYTES 16 -#define IOC4_PRD_ENTRIES (PAGE_SIZE /(4*IOC4_PRD_BYTES)) +#define IOC4_PRD_BYTES 16 +#define IOC4_PRD_ENTRIES (PAGE_SIZE / (4 * IOC4_PRD_BYTES)) -static void -sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, - unsigned long ctrl_port, unsigned long irq_port) +static void sgiioc4_init_hwif_ports(struct ide_hw *hw, + unsigned long data_port, + unsigned long ctrl_port, + unsigned long irq_port) { unsigned long reg = data_port; int i; @@ -105,13 +105,11 @@ sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, hw->io_ports.irq_addr = irq_port; } -static int -sgiioc4_checkirq(ide_hwif_t * hwif) +static int sgiioc4_checkirq(ide_hwif_t *hwif) { - unsigned long intr_addr = - hwif->io_ports.irq_addr + IOC4_INTR_REG * 4; + unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4; - if ((u8)readl((void __iomem *)intr_addr) & 0x03) + if (readl((void __iomem *)intr_addr) & 0x03) return 1; return 0; @@ -119,8 +117,7 @@ sgiioc4_checkirq(ide_hwif_t * hwif) static u8 sgiioc4_read_status(ide_hwif_t *); -static int -sgiioc4_clearirq(ide_drive_t * drive) +static int sgiioc4_clearirq(ide_drive_t *drive) { u32 intr_reg; ide_hwif_t *hwif = drive->hwif; @@ -158,12 +155,10 @@ sgiioc4_clearirq(ide_drive_t * drive) readl((void __iomem *)(io_ports->irq_addr + 4)); pci_read_config_dword(dev, PCI_COMMAND, &pci_stat_cmd_reg); - printk(KERN_ERR - "%s(%s) : PCI Bus Error when doing DMA:" - " status-cmd reg is 0x%x\n", + printk(KERN_ERR "%s(%s): PCI Bus Error when doing DMA: " + "status-cmd reg is 0x%x\n", __func__, drive->name, pci_stat_cmd_reg); - printk(KERN_ERR - "%s(%s) : PCI Error Address is 0x%x%x\n", + printk(KERN_ERR "%s(%s): PCI Error Address is 0x%x%x\n", __func__, drive->name, pci_err_addr_high, pci_err_addr_low); /* Clear the PCI Error indicator */ @@ -189,8 +184,7 @@ static void sgiioc4_dma_start(ide_drive_t *drive) writel(temp_reg, (void __iomem *)ioc4_dma_addr); } -static u32 -sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base) +static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base) { unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4; u32 ioc4_dma; @@ -227,7 +221,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive) } /* - * The IOC4 will DMA 1's to the ending dma area to indicate that + * The IOC4 will DMA 1's to the ending DMA area to indicate that * previous data DMA is complete. This is necessary because of relaxed * ordering between register reads and DMA writes on the Altix. */ @@ -258,17 +252,14 @@ static int sgiioc4_dma_end(ide_drive_t *drive) } } - drive->waiting_for_dma = 0; - ide_destroy_dmatable(drive); - return dma_stat; } -static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { } -/* returns 1 if dma irq issued, 0 otherwise */ +/* Returns 1 if DMA IRQ issued, 0 otherwise */ static int sgiioc4_dma_test_irq(ide_drive_t *drive) { return sgiioc4_checkirq(drive->hwif); @@ -280,15 +271,16 @@ static void sgiioc4_dma_host_set(ide_drive_t *drive, int on) sgiioc4_clearirq(drive); } -static void -sgiioc4_resetproc(ide_drive_t * drive) +static void sgiioc4_resetproc(ide_drive_t *drive) { + struct ide_cmd *cmd = &drive->hwif->cmd; + sgiioc4_dma_end(drive); + ide_dma_unmap_sg(drive, cmd); sgiioc4_clearirq(drive); } -static void -sgiioc4_dma_lost_irq(ide_drive_t * drive) +static void sgiioc4_dma_lost_irq(ide_drive_t *drive) { sgiioc4_resetproc(drive); @@ -314,13 +306,12 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif) return reg; } -/* Creates a dma map for the scatter-gather list entries */ -static int __devinit -ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) +/* Creates a DMA map for the scatter-gather list entries */ +static int ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; - int num_ports = sizeof (ioc4_dma_regs_t); + int num_ports = sizeof(struct ioc4_dma_regs); void *pad; printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); @@ -363,8 +354,7 @@ dma_pci_alloc_failure: } /* Initializes the IOC4 DMA Engine */ -static void -sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) +static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t *drive) { u32 ioc4_dma; ide_hwif_t *hwif = drive->hwif; @@ -375,31 +365,27 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) ioc4_dma = readl((void __iomem *)ioc4_dma_addr); if (ioc4_dma & IOC4_S_DMA_ACTIVE) { - printk(KERN_WARNING - "%s(%s):Warning!! DMA from previous transfer was still active\n", - __func__, drive->name); + printk(KERN_WARNING "%s(%s): Warning!! DMA from previous " + "transfer was still active\n", __func__, drive->name); writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); if (ioc4_dma & IOC4_S_DMA_STOP) - printk(KERN_ERR - "%s(%s) : IOC4 Dma STOP bit is still 1\n", - __func__, drive->name); + printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is " + "still 1\n", __func__, drive->name); } ioc4_dma = readl((void __iomem *)ioc4_dma_addr); if (ioc4_dma & IOC4_S_DMA_ERROR) { - printk(KERN_WARNING - "%s(%s) : Warning!! - DMA Error during Previous" - " transfer | status 0x%x\n", + printk(KERN_WARNING "%s(%s): Warning!! DMA Error during " + "previous transfer, status 0x%x\n", __func__, drive->name, ioc4_dma); writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); if (ioc4_dma & IOC4_S_DMA_STOP) - printk(KERN_ERR - "%s(%s) : IOC4 DMA STOP bit is still 1\n", - __func__, drive->name); + printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is " + "still 1\n", __func__, drive->name); } /* Address of the Scatter Gather List */ @@ -409,35 +395,29 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) /* Address of the Ending DMA */ memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE); ending_dma_addr = cpu_to_le32(hwif->extra_base); - writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4)); + writel(ending_dma_addr, (void __iomem *)(dma_base + + IOC4_DMA_END_ADDR * 4)); writel(dma_direction, (void __iomem *)ioc4_dma_addr); - drive->waiting_for_dma = 1; } -/* IOC4 Scatter Gather list Format */ +/* IOC4 Scatter Gather list Format */ /* 128 Bit entries to support 64 bit addresses in the future */ /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */ /* --------------------------------------------------------------------- */ -/* | Upper 32 bits - Zero | Lower 32 bits- address | */ +/* | Upper 32 bits - Zero | Lower 32 bits- address | */ /* --------------------------------------------------------------------- */ /* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */ /* --------------------------------------------------------------------- */ -/* Creates the scatter gather list, DMA Table */ -static unsigned int -sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir) +/* Creates the scatter gather list, DMA Table */ + +static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; unsigned int *table = hwif->dmatable_cpu; - unsigned int count = 0, i = 1; - struct scatterlist *sg; + unsigned int count = 0, i = cmd->sg_nents; + struct scatterlist *sg = hwif->sg_table; - hwif->sg_nents = i = ide_build_sglist(drive, rq); - - if (!i) - return 0; /* sglist of length Zero */ - - sg = hwif->sg_table; while (i && sg_dma_len(sg)) { dma_addr_t cur_addr; int cur_len; @@ -449,7 +429,7 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir) printk(KERN_WARNING "%s: DMA table too small\n", drive->name); - goto use_pio_instead; + return 0; } else { u32 bcount = 0x10000 - (cur_addr & 0xffff); @@ -457,8 +437,10 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir) if (bcount > cur_len) bcount = cur_len; - /* put the addr, length in - * the IOC4 dma-table format */ + /* + * Put the address, length in + * the IOC4 dma-table format + */ *table = 0x0; table++; *table = cpu_to_be32(cur_addr); @@ -484,30 +466,19 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir) return count; } -use_pio_instead: - ide_destroy_dmatable(drive); - return 0; /* revert to PIO for this request */ } -static int sgiioc4_dma_setup(ide_drive_t *drive) +static int sgiioc4_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { - struct request *rq = drive->hwif->rq; - unsigned int count = 0; int ddir; + u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE); - if (rq_data_dir(rq)) - ddir = PCI_DMA_TODEVICE; - else - ddir = PCI_DMA_FROMDEVICE; - - if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) { + if (sgiioc4_build_dmatable(drive, cmd) == 0) /* try PIO instead of DMA */ - ide_map_sg(drive, rq); return 1; - } - if (rq_data_dir(rq)) + if (write) /* Writes TO the IOC4 FROM Main Memory */ ddir = IOC4_DMA_READ; else @@ -523,9 +494,9 @@ static const struct ide_tp_ops sgiioc4_tp_ops = { .exec_command = ide_exec_command, .read_status = sgiioc4_read_status, .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, - .set_irq = ide_set_irq, - + .dev_select = ide_dev_select, .tf_load = ide_tf_load, .tf_read = ide_tf_read, @@ -546,10 +517,9 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { .dma_end = sgiioc4_dma_end, .dma_test_irq = sgiioc4_dma_test_irq, .dma_lost_irq = sgiioc4_dma_lost_irq, - .dma_timeout = ide_dma_timeout, }; -static const struct ide_port_info sgiioc4_port_info __devinitconst = { +static const struct ide_port_info sgiioc4_port_info = { .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, @@ -557,19 +527,19 @@ static const struct ide_port_info sgiioc4_port_info __devinitconst = { .port_ops = &sgiioc4_port_ops, .dma_ops = &sgiioc4_dma_ops, .host_flags = IDE_HFLAG_MMIO, + .irq_flags = IRQF_SHARED, .mwdma_mask = ATA_MWDMA2_ONLY, }; -static int __devinit -sgiioc4_ide_setup_pci_device(struct pci_dev *dev) +static int sgiioc4_ide_setup_pci_device(struct pci_dev *dev) { unsigned long cmd_base, irqport; unsigned long bar0, cmd_phys_base, ctl; void __iomem *virt_base; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; int rc; - /* Get the CmdBlk and CtrlBlk Base Registers */ + /* Get the CmdBlk and CtrlBlk base registers */ bar0 = pci_resource_start(dev, 0); virt_base = pci_ioremap_bar(dev, 0); if (virt_base == NULL) { @@ -577,9 +547,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) DRV_NAME, bar0); return -ENOMEM; } - cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET; - ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET; - irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET; + cmd_base = (unsigned long)virt_base + IOC4_CMD_OFFSET; + ctl = (unsigned long)virt_base + IOC4_CTRL_OFFSET; + irqport = (unsigned long)virt_base + IOC4_INTR_OFFSET; cmd_phys_base = bar0 + IOC4_CMD_OFFSET; if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, @@ -595,13 +565,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) memset(&hw, 0, sizeof(hw)); sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport); hw.irq = dev->irq; - hw.chipset = ide_pci; hw.dev = &dev->dev; - /* Initializing chipset IRQ Registers */ + /* Initialize chipset IRQ registers */ writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4)); - rc = ide_host_add(&sgiioc4_port_info, hws, NULL); + rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL); if (!rc) return 0; @@ -611,8 +580,7 @@ req_mem_rgn_err: return rc; } -static unsigned int __devinit -pci_init_sgiioc4(struct pci_dev *dev) +static unsigned int pci_init_sgiioc4(struct pci_dev *dev) { int ret; @@ -632,10 +600,10 @@ out: return ret; } -int __devinit -ioc4_ide_attach_one(struct ioc4_driver_data *idd) +static int ioc4_ide_attach_one(struct ioc4_driver_data *idd) { - /* PCI-RT does not bring out IDE connection. + /* + * PCI-RT does not bring out IDE connection. * Do not attach to this particular IOC4. */ if (idd->idd_variant == IOC4_VARIANT_PCI_RT) @@ -644,11 +612,10 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd) return pci_init_sgiioc4(idd->idd_pdev); } -static struct ioc4_submodule __devinitdata ioc4_ide_submodule = { +static struct ioc4_submodule ioc4_ide_submodule = { .is_name = "IOC4_ide", .is_owner = THIS_MODULE, .is_probe = ioc4_ide_attach_one, -/* .is_remove = ioc4_ide_remove_one, */ }; static int __init ioc4_ide_init(void) diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c index cb2b352b876..6a1849bb476 100644 --- a/drivers/ide/siimage.c +++ b/drivers/ide/siimage.c @@ -32,7 +32,6 @@ * smarter code in libata. * * TODO: - * - IORDY fixes * - VDMA support */ @@ -230,20 +229,18 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive) /** * sil_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Load the timing settings for this device mode into the - * controller. If we are in PIO mode 3 or 4 turn on IORDY - * monitoring (bit 9). The TF timing is bits 31:16 + * controller. */ -static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) +static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); ide_drive_t *pair = ide_get_pair_dev(drive); u32 speedt = 0; @@ -251,6 +248,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) unsigned long addr = siimage_seldev(drive, 0x04); unsigned long tfaddr = siimage_selreg(hwif, 0x02); unsigned long base = (unsigned long)hwif->hwif_data; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 tf_pio = pio; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) @@ -260,7 +258,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) /* trim *taskfile* PIO to the slowest of the master/slave */ if (pair) { - u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); + u8 pair_pio = pair->pio_mode - XFER_PIO_0; if (pair_pio < tf_pio) tf_pio = pair_pio; @@ -276,31 +274,33 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) /* now set up IORDY */ speedp = sil_ioread16(dev, tfaddr - 2); speedp &= ~0x200; - if (pio > 2) - speedp |= 0x200; - sil_iowrite16(dev, speedp, tfaddr - 2); mode = sil_ioread8(dev, base + addr_mask); mode &= ~(unit ? 0x30 : 0x03); - mode |= unit ? 0x10 : 0x01; + + if (ide_pio_need_iordy(drive, pio)) { + speedp |= 0x200; + mode |= unit ? 0x10 : 0x01; + } + + sil_iowrite16(dev, speedp, tfaddr - 2); sil_iowrite8(dev, mode, base + addr_mask); } /** * sil_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Tune the SiI chipset for the desired DMA mode. */ -static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sil_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long base = (unsigned long)hwif->hwif_data; u16 ultra = 0, multi = 0; @@ -310,6 +310,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) : (mmio ? 0xB4 : 0x80); unsigned long ma = siimage_seldev(drive, 0x08); unsigned long ua = siimage_seldev(drive, 0x0C); + const u8 speed = drive->dma_mode; scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); mode = sil_ioread8 (dev, base + addr_mask); @@ -337,24 +338,14 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) sil_iowrite16(dev, ultra, ua); } -/* returns 1 if dma irq issued, 0 otherwise */ -static int siimage_io_dma_test_irq(ide_drive_t *drive) +static int sil_test_irq(ide_hwif_t *hwif) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 dma_altstat = 0; unsigned long addr = siimage_selreg(hwif, 1); + u8 val = sil_ioread8(dev, addr); - /* return 1 if INTR asserted */ - if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4) - return 1; - - /* return 1 if Device INTR asserted */ - pci_read_config_byte(dev, addr, &dma_altstat); - if (dma_altstat & 8) - return 0; /* return 1; */ - - return 0; + /* Return 1 if INTRQ asserted */ + return (val & 8) ? 1 : 0; } /** @@ -368,7 +359,6 @@ static int siimage_io_dma_test_irq(ide_drive_t *drive) static int siimage_mmio_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - unsigned long addr = siimage_selreg(hwif, 0x1); void __iomem *sata_error_addr = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET]; @@ -397,10 +387,6 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive) if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4) return 1; - /* return 1 if Device INTR asserted */ - if (readb((void __iomem *)addr) & 8) - return 0; /* return 1; */ - return 0; } @@ -409,7 +395,7 @@ static int siimage_dma_test_irq(ide_drive_t *drive) if (drive->hwif->host_flags & IDE_HFLAG_MMIO) return siimage_mmio_dma_test_irq(drive); else - return siimage_io_dma_test_irq(drive); + return ide_dma_test_irq(drive); } /** @@ -451,8 +437,8 @@ static int sil_sata_reset_poll(ide_drive_t *drive) static void sil_sata_pre_reset(ide_drive_t *drive) { if (drive->media == ide_disk) { - drive->special.b.set_geometry = 0; - drive->special.b.recalibrate = 0; + drive->special_flags &= + ~(IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE); } } @@ -464,7 +450,7 @@ static void sil_sata_pre_reset(ide_drive_t *drive) * to 133 MHz clocking if the system isn't already set up to do it. */ -static unsigned int init_chipset_siimage(struct pci_dev *dev) +static int init_chipset_siimage(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); void __iomem *ioaddr = host->host_priv; @@ -560,7 +546,7 @@ static unsigned int init_chipset_siimage(struct pci_dev *dev) * extended PRD tables. For better SI3112 support use the libata driver */ -static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) +static void init_mmio_iops_siimage(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); @@ -660,7 +646,7 @@ static void sil_quirkproc(ide_drive_t *drive) * can get the iops right before using them. */ -static void __devinit init_iops_siimage(ide_hwif_t *hwif) +static void init_iops_siimage(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); @@ -694,6 +680,7 @@ static const struct ide_port_ops sil_pata_port_ops = { .set_pio_mode = sil_set_pio_mode, .set_dma_mode = sil_set_dma_mode, .quirkproc = sil_quirkproc, + .test_irq = sil_test_irq, .udma_filter = sil_pata_udma_filter, .cable_detect = sil_cable_detect, }; @@ -704,6 +691,7 @@ static const struct ide_port_ops sil_sata_port_ops = { .reset_poll = sil_sata_reset_poll, .pre_reset = sil_sata_pre_reset, .quirkproc = sil_quirkproc, + .test_irq = sil_test_irq, .udma_filter = sil_sata_udma_filter, .cable_detect = sil_cable_detect, }; @@ -711,11 +699,10 @@ static const struct ide_port_ops sil_sata_port_ops = { static const struct ide_dma_ops sil_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, .dma_end = ide_dma_end, .dma_test_irq = siimage_dma_test_irq, - .dma_timeout = ide_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_lost_irq = ide_dma_lost_irq, .dma_sff_read_status = ide_dma_sff_read_status, }; @@ -732,7 +719,7 @@ static const struct ide_dma_ops sil_dma_ops = { .udma_mask = ATA_UDMA6, \ } -static const struct ide_port_info siimage_chipsets[] __devinitdata = { +static const struct ide_port_info siimage_chipsets[] = { /* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops), /* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops) }; @@ -746,8 +733,7 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit siimage_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id) { void __iomem *ioaddr = NULL; resource_size_t bar5 = pci_resource_start(dev, 5); @@ -803,7 +789,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev, return rc; } -static void __devexit siimage_remove(struct pci_dev *dev) +static void siimage_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); void __iomem *ioaddr = host->host_priv; @@ -835,7 +821,7 @@ static struct pci_driver siimage_pci_driver = { .name = "SiI_IDE", .id_table = siimage_pci_tbl, .probe = siimage_init_one, - .remove = __devexit_p(siimage_remove), + .remove = siimage_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c index 9ec1a4a4432..247853ea136 100644 --- a/drivers/ide/sis5513.c +++ b/drivers/ide/sis5513.c @@ -2,7 +2,7 @@ * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz> - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2009 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License * @@ -53,7 +53,7 @@ #define DRV_NAME "sis5513" -/* registers layout and init values are chipset family dependant */ +/* registers layout and init values are chipset family dependent */ #define ATA_16 0x01 #define ATA_33 0x02 @@ -281,17 +281,19 @@ static void config_drive_art_rwp(ide_drive_t *drive) pci_read_config_byte(dev, 0x4b, ®4bh); + rw_prefetch = reg4bh & ~(0x11 << drive->dn); + if (drive->media == ide_disk) - rw_prefetch = 0x11 << drive->dn; + rw_prefetch |= 0x11 << drive->dn; - if ((reg4bh & (0x11 << drive->dn)) != rw_prefetch) - pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch); + if (reg4bh != rw_prefetch) + pci_write_config_byte(dev, 0x4b, rw_prefetch); } -static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void sis_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { config_drive_art_rwp(drive); - sis_program_timings(drive, XFER_PIO_0 + pio); + sis_program_timings(drive, drive->pio_mode); } static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode) @@ -338,8 +340,10 @@ static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode) sis_ata33_program_udma_timings(drive, mode); } -static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { + const u8 speed = drive->dma_mode; + if (speed >= XFER_UDMA_0) sis_program_udma_timings(drive, speed); else @@ -358,7 +362,7 @@ static u8 sis_ata133_udma_filter(ide_drive_t *drive) return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5; } -static int __devinit sis_find_family(struct pci_dev *dev) +static int sis_find_family(struct pci_dev *dev) { struct pci_dev *host; int i = 0; @@ -402,7 +406,7 @@ static int __devinit sis_find_family(struct pci_dev *dev) pci_name(dev)); chipset_family = ATA_133; - /* Check for 5513 compability mapping + /* Check for 5513 compatibility mapping * We must use this, else the port enabled code will fail, * as it expects the enablebits at 0x4a. */ @@ -447,7 +451,7 @@ static int __devinit sis_find_family(struct pci_dev *dev) return chipset_family; } -static unsigned int init_chipset_sis5513(struct pci_dev *dev) +static int init_chipset_sis5513(struct pci_dev *dev) { /* Make general config ops here 1/ tell IDE channels to operate in Compatibility mode only @@ -559,16 +563,16 @@ static const struct ide_port_ops sis_ata133_port_ops = { .cable_detect = sis_cable_detect, }; -static const struct ide_port_info sis5513_chipset __devinitdata = { +static const struct ide_port_info sis5513_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_sis5513, .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} }, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA, + .host_flags = IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, }; -static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d = sis5513_chipset; u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; @@ -591,7 +595,7 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi return ide_pci_init_one(dev, &d, NULL); } -static void __devexit sis5513_remove(struct pci_dev *dev) +static void sis5513_remove(struct pci_dev *dev) { ide_pci_remove(dev); pci_disable_device(dev); @@ -609,7 +613,7 @@ static struct pci_driver sis5513_pci_driver = { .name = "SIS_IDE", .id_table = sis5513_pci_tbl, .probe = sis5513_init_one, - .remove = __devexit_p(sis5513_remove), + .remove = sis5513_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; @@ -630,12 +634,3 @@ module_exit(sis5513_ide_exit); MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik"); MODULE_DESCRIPTION("PCI driver module for SIS IDE"); MODULE_LICENSE("GPL"); - -/* - * TODO: - * - CLEANUP - * - More checks in the config registers (force values instead of - * relying on the BIOS setting them correctly). - * - Further optimisations ? - * . for example ATA66+ regs 0x48 & 0x4A - */ diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c index 48cc748c504..8755df3330a 100644 --- a/drivers/ide/sl82c105.c +++ b/drivers/ide/sl82c105.c @@ -10,7 +10,7 @@ * with the timing registers setup. * -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org * - * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2006-2007,2009 MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2007 Bartlomiej Zolnierkiewicz */ @@ -24,13 +24,6 @@ #define DRV_NAME "sl82c105" -#undef DEBUG - -#ifdef DEBUG -#define DBG(arg) printk arg -#else -#define DBG(fmt,...) -#endif /* * SL82C105 PCI config register 0x40 bits. */ @@ -61,7 +54,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) if (cmd_off == 0) cmd_off = 1; - if (pio > 2 || ata_id_has_iordy(drive->id)) + if (ide_pio_need_iordy(drive, pio)) iordy = 0x40; return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy; @@ -70,11 +63,13 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) /* * Configure the chipset for PIO mode. */ -static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void sl82c105_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long timings = (unsigned long)ide_get_drivedata(drive); int reg = 0x44 + drive->dn * 4; u16 drv_ctrl; + const u8 pio = drive->pio_mode - XFER_PIO_0; drv_ctrl = get_pio_timings(drive, pio); @@ -82,8 +77,9 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) * Store the PIO timings so that we can restore them * in case DMA will be turned off... */ - drive->drive_data &= 0xffff0000; - drive->drive_data |= drv_ctrl; + timings &= 0xffff0000; + timings |= drv_ctrl; + ide_set_drivedata(drive, (void *)timings); pci_write_config_word(dev, reg, drv_ctrl); pci_read_config_word (dev, reg, &drv_ctrl); @@ -96,13 +92,12 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) /* * Configure the chipset for DMA mode. */ -static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sl82c105_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; + unsigned long timings = (unsigned long)ide_get_drivedata(drive); u16 drv_ctrl; - - DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n", - drive->name, ide_xfer_verbose(speed))); + const u8 speed = drive->dma_mode; drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; @@ -110,8 +105,19 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) * Store the DMA timings so that we can actually program * them when DMA will be turned on... */ - drive->drive_data &= 0x0000ffff; - drive->drive_data |= (unsigned long)drv_ctrl << 16; + timings &= 0x0000ffff; + timings |= (unsigned long)drv_ctrl << 16; + ide_set_drivedata(drive, (void *)timings); +} + +static int sl82c105_test_irq(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; + + pci_read_config_dword(dev, 0x40, &val); + + return (val & mask) ? 1 : 0; } /* @@ -145,14 +151,15 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive) u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; u8 dma_cmd; - printk("sl82c105: lost IRQ, resetting host\n"); + printk(KERN_WARNING "sl82c105: lost IRQ, resetting host\n"); /* * Check the raw interrupt from the drive. */ pci_read_config_dword(dev, 0x40, &val); if (val & mask) - printk("sl82c105: drive was requesting IRQ, but host lost it\n"); + printk(KERN_INFO "sl82c105: drive was requesting IRQ, " + "but host lost it\n"); /* * Was DMA enabled? If so, disable it - we're resetting the @@ -161,7 +168,7 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive) dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); if (dma_cmd & 1) { outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); - printk("sl82c105: DMA was enabled\n"); + printk(KERN_INFO "sl82c105: DMA was enabled\n"); } sl82c105_reset_host(dev); @@ -181,35 +188,28 @@ static void sl82c105_dma_start(ide_drive_t *drive) struct pci_dev *dev = to_pci_dev(hwif->dev); int reg = 0x44 + drive->dn * 4; - DBG(("%s(drive:%s)\n", __func__, drive->name)); - - pci_write_config_word(dev, reg, drive->drive_data >> 16); + pci_write_config_word(dev, reg, + (unsigned long)ide_get_drivedata(drive) >> 16); sl82c105_reset_host(dev); ide_dma_start(drive); } -static void sl82c105_dma_timeout(ide_drive_t *drive) +static void sl82c105_dma_clear(ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name)); - sl82c105_reset_host(dev); - ide_dma_timeout(drive); } static int sl82c105_dma_end(ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); int reg = 0x44 + drive->dn * 4; - int ret; + int ret = ide_dma_end(drive); - DBG(("%s(drive:%s)\n", __func__, drive->name)); - - ret = ide_dma_end(drive); - - pci_write_config_word(dev, reg, drive->drive_data); + pci_write_config_word(dev, reg, + (unsigned long)ide_get_drivedata(drive)); return ret; } @@ -223,8 +223,6 @@ static void sl82c105_resetproc(ide_drive_t *drive) struct pci_dev *dev = to_pci_dev(drive->hwif->dev); u32 val; - DBG(("sl82c105_resetproc(drive:%s)\n", drive->name)); - pci_read_config_dword(dev, 0x40, &val); val |= (CTRL_P1F16 | CTRL_P0F16); pci_write_config_dword(dev, 0x40, val); @@ -271,38 +269,37 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev) * channel 0 here at least, but channel 1 has to be enabled by * firmware or arch code. We still set both to 16 bits mode. */ -static unsigned int init_chipset_sl82c105(struct pci_dev *dev) +static int init_chipset_sl82c105(struct pci_dev *dev) { u32 val; - DBG(("init_chipset_sl82c105()\n")); - pci_read_config_dword(dev, 0x40, &val); val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); - return dev->irq; + return 0; } static const struct ide_port_ops sl82c105_port_ops = { .set_pio_mode = sl82c105_set_pio_mode, .set_dma_mode = sl82c105_set_dma_mode, .resetproc = sl82c105_resetproc, + .test_irq = sl82c105_test_irq, }; static const struct ide_dma_ops sl82c105_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = sl82c105_dma_start, .dma_end = sl82c105_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = sl82c105_dma_lost_irq, - .dma_timeout = sl82c105_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, + .dma_clear = sl82c105_dma_clear, .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info sl82c105_chipset __devinitdata = { +static const struct ide_port_info sl82c105_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_sl82c105, .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, @@ -310,17 +307,13 @@ static const struct ide_port_info sl82c105_chipset __devinitdata = { .dma_ops = &sl82c105_dma_ops, .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | -/* FIXME: check for Compatibility mode in generic IDE PCI code */ -#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT) - IDE_HFLAG_FORCE_LEGACY_IRQS | -#endif IDE_HFLAG_SERIALIZE_DMA | IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, }; -static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ide_port_info d = sl82c105_chipset; u8 rev = sl82c105_bridge_revision(dev); diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c index 40b4b94a428..8af92bbb3dc 100644 --- a/drivers/ide/slc90e66.c +++ b/drivers/ide/slc90e66.c @@ -18,9 +18,8 @@ static DEFINE_SPINLOCK(slc90e66_lock); -static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int is_slave = drive->dn & 1; int master_port = hwif->channel ? 0x42 : 0x40; @@ -29,6 +28,8 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) u16 master_data; u8 slave_data; int control = 0; + const u8 pio = drive->pio_mode - XFER_PIO_0; + /* ISP RTC */ static const u8 timings[][2] = { { 0, 0 }, @@ -44,7 +45,7 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) control |= 1; /* Programmable timing on */ if (drive->media == ide_disk) control |= 4; /* Prefetch, post write */ - if (pio > 2) + if (ide_pio_need_iordy(drive, pio)) control |= 2; /* IORDY */ if (is_slave) { master_data |= 0x4000; @@ -71,14 +72,14 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&slc90e66_lock, flags); } -static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 maslave = hwif->channel ? 0x42 : 0x40; int sitre = 0, a_speed = 7 << (drive->dn * 4); int u_speed = 0, u_flag = 1 << drive->dn; u16 reg4042, reg44, reg48, reg4a; + const u8 speed = drive->dma_mode; pci_read_config_word(dev, maslave, ®4042); sitre = (reg4042 & 0x4000) ? 1 : 0; @@ -91,15 +92,13 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) if (!(reg48 & u_flag)) pci_write_config_word(dev, 0x48, reg48|u_flag); - /* FIXME: (reg4a & a_speed) ? */ - if ((reg4a & u_speed) != u_speed) { + if ((reg4a & a_speed) != u_speed) { pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); pci_read_config_word(dev, 0x4a, ®4a); pci_write_config_word(dev, 0x4a, reg4a|u_speed); } } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; - u8 pio; if (reg48 & u_flag) pci_write_config_word(dev, 0x48, reg48 & ~u_flag); @@ -107,11 +106,12 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); if (speed >= XFER_MW_DMA_0) - pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; + drive->pio_mode = + mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; else - pio = 2; /* only SWDMA2 is allowed */ + drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ - slc90e66_set_pio_mode(drive, pio); + slc90e66_set_pio_mode(hwif, drive); } } @@ -132,18 +132,18 @@ static const struct ide_port_ops slc90e66_port_ops = { .cable_detect = slc90e66_cable_detect, }; -static const struct ide_port_info slc90e66_chipset __devinitdata = { +static const struct ide_port_info slc90e66_chipset = { .name = DRV_NAME, .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} }, .port_ops = &slc90e66_port_ops, - .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2_ONLY, .mwdma_mask = ATA_MWDMA12_ONLY, .udma_mask = ATA_UDMA4, }; -static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int slc90e66_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { return ide_pci_init_one(dev, &slc90e66_chipset, NULL); } diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c index 84109f5a163..17e6132b99b 100644 --- a/drivers/ide/tc86c001.c +++ b/drivers/ide/tc86c001.c @@ -10,14 +10,15 @@ #include <linux/types.h> #include <linux/pci.h> #include <linux/ide.h> +#include <linux/module.h> #define DRV_NAME "tc86c001" -static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) +static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); u16 mode, scr = inw(scr_port); + const u8 speed = drive->dma_mode; switch (speed) { case XFER_UDMA_4: mode = 0x00c0; break; @@ -41,9 +42,10 @@ static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) outw(scr, scr_port); } -static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - tc86c001_set_mode(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + tc86c001_set_mode(hwif, drive); } /* @@ -112,7 +114,7 @@ static void tc86c001_dma_start(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; unsigned long sc_base = hwif->config_data; unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04); - unsigned long nsectors = hwif->rq->nr_sectors; + unsigned long nsectors = blk_rq_sectors(hwif->rq); /* * We have to manually load the sector count and size into @@ -142,7 +144,7 @@ static u8 tc86c001_cable_detect(ide_hwif_t *hwif) return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) +static void init_hwif_tc86c001(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long sc_base = pci_resource_start(dev, 5); @@ -182,16 +184,15 @@ static const struct ide_port_ops tc86c001_port_ops = { static const struct ide_dma_ops tc86c001_dma_ops = { .dma_host_set = ide_dma_host_set, .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = tc86c001_dma_start, .dma_end = ide_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = ide_dma_sff_read_status, }; -static const struct ide_port_info tc86c001_chipset __devinitdata = { +static const struct ide_port_info tc86c001_chipset = { .name = DRV_NAME, .init_hwif = init_hwif_tc86c001, .port_ops = &tc86c001_port_ops, @@ -202,8 +203,8 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = { .udma_mask = ATA_UDMA4, }; -static int __devinit tc86c001_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int tc86c001_init_one(struct pci_dev *dev, + const struct pci_device_id *id) { int rc; @@ -231,7 +232,7 @@ out: return rc; } -static void __devexit tc86c001_remove(struct pci_dev *dev) +static void tc86c001_remove(struct pci_dev *dev) { ide_pci_remove(dev); pci_release_region(dev, 5); @@ -248,7 +249,7 @@ static struct pci_driver tc86c001_pci_driver = { .name = "TC86C001", .id_table = tc86c001_pci_tbl, .probe = tc86c001_init_one, - .remove = __devexit_p(tc86c001_remove), + .remove = tc86c001_remove, }; static int __init tc86c001_ide_init(void) diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c index 8773c3ba746..7f1af9493f0 100644 --- a/drivers/ide/triflex.c +++ b/drivers/ide/triflex.c @@ -22,7 +22,7 @@ * Loosely based on the piix & svwks drivers. * * Documentation: - * Not publically available. + * Not publicly available. */ #include <linux/types.h> @@ -34,9 +34,8 @@ #define DRV_NAME "triflex" -static void triflex_set_mode(ide_drive_t *drive, const u8 speed) +static void triflex_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u32 triflex_timings = 0; u16 timing = 0; @@ -44,7 +43,7 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed) pci_read_config_dword(dev, channel_offset, &triflex_timings); - switch(speed) { + switch (drive->dma_mode) { case XFER_MW_DMA_2: timing = 0x0103; break; @@ -82,9 +81,10 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed) pci_write_config_dword(dev, channel_offset, triflex_timings); } -static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - triflex_set_mode(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + triflex_set_mode(hwif, drive); } static const struct ide_port_ops triflex_port_ops = { @@ -92,7 +92,7 @@ static const struct ide_port_ops triflex_port_ops = { .set_dma_mode = triflex_set_mode, }; -static const struct ide_port_info triflex_device __devinitdata = { +static const struct ide_port_info triflex_device = { .name = DRV_NAME, .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}}, .port_ops = &triflex_port_ops, @@ -101,8 +101,7 @@ static const struct ide_port_info triflex_device __devinitdata = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit triflex_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &triflex_device, NULL); } @@ -113,12 +112,26 @@ static const struct pci_device_id triflex_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, triflex_pci_tbl); +#ifdef CONFIG_PM +static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state) +{ + /* + * We must not disable or powerdown the device. + * APM bios refuses to suspend if IDE is not accessible. + */ + pci_save_state(dev); + return 0; +} +#else +#define triflex_ide_pci_suspend NULL +#endif + static struct pci_driver triflex_pci_driver = { .name = "TRIFLEX_IDE", .id_table = triflex_pci_tbl, .probe = triflex_init_one, .remove = ide_pci_remove, - .suspend = ide_pci_suspend, + .suspend = triflex_ide_pci_suspend, .resume = ide_pci_resume, }; diff --git a/drivers/ide/trm290.c b/drivers/ide/trm290.c index b6a1285a402..0069f6ce74c 100644 --- a/drivers/ide/trm290.c +++ b/drivers/ide/trm290.c @@ -171,58 +171,51 @@ static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma) local_irq_restore(flags); } -static void trm290_selectproc (ide_drive_t *drive) +static void trm290_dev_select(ide_drive_t *drive) { trm290_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA)); -} -static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command) -{ - ide_execute_command(drive, command, &ide_dma_intr, WAIT_CMD, NULL); + outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr); } -static int trm290_dma_setup(ide_drive_t *drive) +static int trm290_dma_check(ide_drive_t *drive, struct ide_cmd *cmd) { - ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->rq; - unsigned int count, rw; - - if (rq_data_dir(rq)) { + if (cmd->tf_flags & IDE_TFLAG_WRITE) { #ifdef TRM290_NO_DMA_WRITES /* always use PIO for writes */ - trm290_prepare_drive(drive, 0); /* select PIO xfer */ return 1; #endif - rw = 1; - } else - rw = 2; + } + return 0; +} + +static int trm290_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) +{ + ide_hwif_t *hwif = drive->hwif; + unsigned int count, rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 2; - if (!(count = ide_build_dmatable(drive, rq))) { + count = ide_build_dmatable(drive, cmd); + if (count == 0) /* try PIO instead of DMA */ - trm290_prepare_drive(drive, 0); /* select PIO xfer */ return 1; - } - /* select DMA xfer */ - trm290_prepare_drive(drive, 1); + outl(hwif->dmatable_dma | rw, hwif->dma_base); - drive->waiting_for_dma = 1; /* start DMA */ outw(count * 2 - 1, hwif->dma_base + 2); + return 0; } static void trm290_dma_start(ide_drive_t *drive) { + trm290_prepare_drive(drive, 1); } static int trm290_dma_end(ide_drive_t *drive) { - u16 status; + u16 status = inw(drive->hwif->dma_base + 2); - drive->waiting_for_dma = 0; - /* purge DMA mappings */ - ide_destroy_dmatable(drive); - status = inw(drive->hwif->dma_base + 2); + trm290_prepare_drive(drive, 0); return status != 0x00ff; } @@ -238,7 +231,7 @@ static void trm290_dma_host_set(ide_drive_t *drive, int on) { } -static void __devinit init_hwif_trm290(ide_hwif_t *hwif) +static void init_hwif_trm290(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned int cfg_base = pci_resource_start(dev, 4); @@ -277,9 +270,6 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) if (reg & 0x10) /* legacy mode */ hwif->irq = hwif->channel ? 15 : 14; - else if (!hwif->irq && hwif->mate && hwif->mate->irq) - /* sharing IRQ with mate */ - hwif->irq = hwif->mate->irq; #if 1 { @@ -310,25 +300,34 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) #endif } -static const struct ide_port_ops trm290_port_ops = { - .selectproc = trm290_selectproc, +static const struct ide_tp_ops trm290_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, + + .dev_select = trm290_dev_select, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, }; static struct ide_dma_ops trm290_dma_ops = { .dma_host_set = trm290_dma_host_set, .dma_setup = trm290_dma_setup, - .dma_exec_cmd = trm290_dma_exec_cmd, .dma_start = trm290_dma_start, .dma_end = trm290_dma_end, .dma_test_irq = trm290_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_check = trm290_dma_check, }; -static const struct ide_port_info trm290_chipset __devinitdata = { +static const struct ide_port_info trm290_chipset = { .name = DRV_NAME, .init_hwif = init_hwif_trm290, - .port_ops = &trm290_port_ops, + .tp_ops = &trm290_tp_ops, .dma_ops = &trm290_dma_ops, .host_flags = IDE_HFLAG_TRM290 | IDE_HFLAG_NO_ATAPI_DMA | @@ -339,7 +338,7 @@ static const struct ide_port_info trm290_chipset __devinitdata = { IDE_HFLAG_NO_LBA48, }; -static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &trm290_chipset, NULL); } diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index b4ef218072c..68edd4f58a2 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -15,6 +15,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> + +#include <asm/ide.h> #include <asm/txx9/tx4938.h> static void tx4938ide_tune_ebusc(unsigned int ebus_ch, @@ -54,125 +56,22 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, &tx4938_ebuscptr->cr[ebus_ch]); } -static void tx4938ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - struct tx4938ide_platform_info *pdata = hwif->dev->platform_data; - u8 safe = pio; + struct tx4938ide_platform_info *pdata = dev_get_platdata(hwif->dev); + u8 safe = drive->pio_mode - XFER_PIO_0; ide_drive_t *pair; pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, ide_get_best_pio_mode(pair, 255, 5)); + safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0); tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe); } #ifdef __BIG_ENDIAN /* custom iops (independent from SWAP_IO_SPACE) */ -static u8 tx4938ide_inb(unsigned long port) -{ - return __raw_readb((void __iomem *)port); -} - -static void tx4938ide_outb(u8 value, unsigned long port) -{ - __raw_writeb(value, (void __iomem *)port); -} - -static void tx4938ide_tf_load(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - u8 HIHI = task->tf_flags & IDE_TFLAG_LBA48 ? 0xE0 : 0xEF; - - if (task->tf_flags & IDE_TFLAG_FLAGGED) - HIHI = 0xFF; - - if (task->tf_flags & IDE_TFLAG_OUT_DATA) { - u16 data = (tf->hob_data << 8) | tf->data; - - /* no endian swap */ - __raw_writew(data, (void __iomem *)io_ports->data_addr); - } - - if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - tx4938ide_outb(tf->hob_feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - tx4938ide_outb(tf->hob_nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - tx4938ide_outb(tf->hob_lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - tx4938ide_outb(tf->hob_lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - tx4938ide_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - tx4938ide_outb(tf->feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - tx4938ide_outb(tf->nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - tx4938ide_outb(tf->lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - tx4938ide_outb(tf->lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - tx4938ide_outb(tf->lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - tx4938ide_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); -} - -static void tx4938ide_tf_read(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data; - - /* no endian swap */ - data = __raw_readw((void __iomem *)io_ports->data_addr); - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - tx4938ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = tx4938ide_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = tx4938ide_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = tx4938ide_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = tx4938ide_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = tx4938ide_inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = tx4938ide_inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - tx4938ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = - tx4938ide_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = tx4938ide_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = tx4938ide_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = tx4938ide_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = tx4938ide_inb(io_ports->lbah_addr); - } -} - -static void tx4938ide_input_data_swap(ide_drive_t *drive, struct request *rq, +static void tx4938ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long port = drive->hwif->io_ports.data_addr; @@ -184,7 +83,7 @@ static void tx4938ide_input_data_swap(ide_drive_t *drive, struct request *rq, __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2)); } -static void tx4938ide_output_data_swap(ide_drive_t *drive, struct request *rq, +static void tx4938ide_output_data_swap(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long port = drive->hwif->io_ports.data_addr; @@ -202,12 +101,11 @@ static const struct ide_tp_ops tx4938ide_tp_ops = { .exec_command = ide_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, - .read_sff_dma_status = ide_read_sff_dma_status, - - .set_irq = ide_set_irq, + .write_devctl = ide_write_devctl, - .tf_load = tx4938ide_tf_load, - .tf_read = tx4938ide_tf_read, + .dev_select = ide_dev_select, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, .input_data = tx4938ide_input_data_swap, .output_data = tx4938ide_output_data_swap, @@ -219,7 +117,7 @@ static const struct ide_port_ops tx4938ide_port_ops = { .set_pio_mode = tx4938ide_set_pio_mode, }; -static const struct ide_port_info tx4938ide_port_info __initdata = { +static const struct ide_port_info tx4938ide_port_info __initconst = { .port_ops = &tx4938ide_port_ops, #ifdef __BIG_ENDIAN .tp_ops = &tx4938ide_tp_ops, @@ -231,11 +129,10 @@ static const struct ide_port_info tx4938ide_port_info __initdata = { static int __init tx4938ide_probe(struct platform_device *pdev) { - hw_regs_t hw; - hw_regs_t *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; struct ide_host *host; struct resource *res; - struct tx4938ide_platform_info *pdata = pdev->dev.platform_data; + struct tx4938ide_platform_info *pdata = dev_get_platdata(&pdev->dev); int irq, ret, i; unsigned long mapbase, mapctl; struct ide_port_info d = tx4938ide_port_info; @@ -248,7 +145,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev) return -ENODEV; if (!devm_request_mem_region(&pdev->dev, res->start, - res->end - res->start + 1, "tx4938ide")) + resource_size(res), "tx4938ide")) return -EBUSY; mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start, 8 << pdata->ioport_shift); @@ -284,7 +181,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev) tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0); else d.port_ops = NULL; - ret = ide_host_add(&d, hws, &host); + ret = ide_host_add(&d, hws, 1, &host); if (!ret) platform_set_drvdata(pdev, host); return ret; @@ -306,18 +203,7 @@ static struct platform_driver tx4938ide_driver = { .remove = __exit_p(tx4938ide_remove), }; -static int __init tx4938ide_init(void) -{ - return platform_driver_probe(&tx4938ide_driver, tx4938ide_probe); -} - -static void __exit tx4938ide_exit(void) -{ - platform_driver_unregister(&tx4938ide_driver); -} - -module_init(tx4938ide_init); -module_exit(tx4938ide_exit); +module_platform_driver_probe(tx4938ide_driver, tx4938ide_probe); MODULE_DESCRIPTION("TX4938 internal IDE driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 882f6f07c47..4ecdee5eca8 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -18,6 +18,8 @@ #include <linux/io.h> #include <linux/scatterlist.h> +#include <asm/ide.h> + #define MODNAME "tx4939ide" /* ATA Shadow Registers (8-bit except for Data which is 16-bit) */ @@ -102,17 +104,17 @@ static void tx4939ide_writeb(u8 val, void __iomem *base, u32 reg) #define TX4939IDE_BASE(hwif) ((void __iomem *)(hwif)->extra_base) -static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; int is_slave = drive->dn; u32 mask, val; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 safe = pio; ide_drive_t *pair; pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, ide_get_best_pio_mode(pair, 255, 4)); + safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0); /* * Update Command Transfer Mode for master/slave and Data * Transfer Mode for this drive. @@ -123,10 +125,10 @@ static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio) /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */ } -static void tx4939ide_set_dma_mode(ide_drive_t *drive, const u8 mode) +static void tx4939ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; u32 mask, val; + const u8 mode = drive->dma_mode; /* Update Data Transfer Mode for this drive. */ if (mode >= XFER_UDMA_0) @@ -230,7 +232,7 @@ static u8 tx4939ide_clear_dma_status(void __iomem *base) #ifdef __BIG_ENDIAN /* custom ide_build_dmatable to handle swapped layout */ -static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq) +static int tx4939ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; u32 *table = (u32 *)hwif->dmatable_cpu; @@ -238,11 +240,7 @@ static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq) int i; struct scatterlist *sg; - hwif->sg_nents = ide_build_sglist(drive, rq); - if (hwif->sg_nents == 0) - return 0; - - for_each_sg(hwif->sg_table, sg, hwif->sg_nents, i) { + for_each_sg(hwif->sg_table, sg, cmd->sg_nents, i) { u32 cur_addr, cur_len, bcount; cur_addr = sg_dma_address(sg); @@ -261,9 +259,9 @@ static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq) bcount = cur_len; /* * This workaround for zero count seems required. - * (standard ide_build_dmatable do it too) + * (standard ide_build_dmatable does it too) */ - if ((bcount & 0xffff) == 0x0000) + if (bcount == 0x10000) bcount = 0x8000; *table++ = bcount & 0xffff; *table++ = cur_addr; @@ -281,48 +279,36 @@ use_pio_instead: printk(KERN_ERR "%s: %s\n", drive->name, count ? "DMA table too small" : "empty DMA table?"); - ide_destroy_dmatable(drive); - return 0; /* revert to PIO for this request */ } #else #define tx4939ide_build_dmatable ide_build_dmatable #endif -static int tx4939ide_dma_setup(ide_drive_t *drive) +static int tx4939ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; void __iomem *base = TX4939IDE_BASE(hwif); - struct request *rq = hwif->rq; - u8 reading; - int nent; - - if (rq_data_dir(rq)) - reading = 0; - else - reading = ATA_DMA_WR; + u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR; /* fall back to PIO! */ - nent = tx4939ide_build_dmatable(drive, rq); - if (!nent) { - ide_map_sg(drive, rq); + if (tx4939ide_build_dmatable(drive, cmd) == 0) return 1; - } /* PRD table */ tx4939ide_writel(hwif->dmatable_dma, base, TX4939IDE_PRD_Ptr); /* specify r/w */ - tx4939ide_writeb(reading, base, TX4939IDE_DMA_Cmd); + tx4939ide_writeb(rw, base, TX4939IDE_DMA_Cmd); /* clear INTR & ERROR flags */ tx4939ide_clear_dma_status(base); - drive->waiting_for_dma = 1; - tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ? TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1); - tx4939ide_writew(rq->nr_sectors, base, TX4939IDE_Sec_Cnt); + + tx4939ide_writew(blk_rq_sectors(cmd->rq), base, TX4939IDE_Sec_Cnt); + return 0; } @@ -333,8 +319,6 @@ static int tx4939ide_dma_end(ide_drive_t *drive) void __iomem *base = TX4939IDE_BASE(hwif); u16 ctl = tx4939ide_readw(base, TX4939IDE_Int_Ctl); - drive->waiting_for_dma = 0; - /* get DMA command mode */ dma_cmd = tx4939ide_readb(base, TX4939IDE_DMA_Cmd); /* stop DMA */ @@ -343,17 +327,15 @@ static int tx4939ide_dma_end(ide_drive_t *drive) /* read and clear the INTR & ERROR bits */ dma_stat = tx4939ide_clear_dma_status(base); - /* purge DMA mappings */ - ide_destroy_dmatable(drive); - /* verify good DMA status */ - wmb(); +#define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR) - if ((dma_stat & (ATA_DMA_INTR | ATA_DMA_ERR | ATA_DMA_ACTIVE)) == 0 && + /* verify good DMA status */ + if ((dma_stat & CHECK_DMA_MASK) == 0 && (ctl & (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST)) == (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST)) /* INT_IDE lost... bug? */ return 0; - return ((dma_stat & (ATA_DMA_INTR | ATA_DMA_ERR | ATA_DMA_ACTIVE)) != + return ((dma_stat & CHECK_DMA_MASK) != ATA_DMA_INTR) ? 0x10 | dma_stat : 0; } @@ -437,7 +419,7 @@ static int tx4939ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) return ide_allocate_dma_engine(hwif); } -static void tx4939ide_tf_load_fixup(ide_drive_t *drive, ide_task_t *task) +static void tx4939ide_tf_load_fixup(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; void __iomem *base = TX4939IDE_BASE(hwif); @@ -447,119 +429,24 @@ static void tx4939ide_tf_load_fixup(ide_drive_t *drive, ide_task_t *task) * Fix ATA100 CORE System Control Register. (The write to the * Device/Head register may write wrong data to the System * Control Register) - * While Sys_Ctl is written here, selectproc is not needed. + * While Sys_Ctl is written here, dev_select() is not needed. */ tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl); } -#ifdef __BIG_ENDIAN - -/* custom iops (independent from SWAP_IO_SPACE) */ -static u8 tx4939ide_inb(unsigned long port) +static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, + u8 valid) { - return __raw_readb((void __iomem *)port); -} - -static void tx4939ide_outb(u8 value, unsigned long port) -{ - __raw_writeb(value, (void __iomem *)port); -} - -static void tx4939ide_tf_load(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - u8 HIHI = task->tf_flags & IDE_TFLAG_LBA48 ? 0xE0 : 0xEF; - - if (task->tf_flags & IDE_TFLAG_FLAGGED) - HIHI = 0xFF; + ide_tf_load(drive, tf, valid); - if (task->tf_flags & IDE_TFLAG_OUT_DATA) { - u16 data = (tf->hob_data << 8) | tf->data; - - /* no endian swap */ - __raw_writew(data, (void __iomem *)io_ports->data_addr); - } - - if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - tx4939ide_outb(tf->hob_feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - tx4939ide_outb(tf->hob_nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - tx4939ide_outb(tf->hob_lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - tx4939ide_outb(tf->hob_lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - tx4939ide_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - tx4939ide_outb(tf->feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - tx4939ide_outb(tf->nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - tx4939ide_outb(tf->lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - tx4939ide_outb(tf->lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - tx4939ide_outb(tf->lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) { - tx4939ide_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); - tx4939ide_tf_load_fixup(drive, task); - } + if (valid & IDE_VALID_DEVICE) + tx4939ide_tf_load_fixup(drive); } -static void tx4939ide_tf_read(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data; - - /* no endian swap */ - data = __raw_readw((void __iomem *)io_ports->data_addr); - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - tx4939ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = tx4939ide_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = tx4939ide_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = tx4939ide_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = tx4939ide_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = tx4939ide_inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = tx4939ide_inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - tx4939ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = - tx4939ide_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = tx4939ide_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = tx4939ide_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = tx4939ide_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = tx4939ide_inb(io_ports->lbah_addr); - } -} +#ifdef __BIG_ENDIAN -static void tx4939ide_input_data_swap(ide_drive_t *drive, struct request *rq, +/* custom iops (independent from SWAP_IO_SPACE) */ +static void tx4939ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long port = drive->hwif->io_ports.data_addr; @@ -571,7 +458,7 @@ static void tx4939ide_input_data_swap(ide_drive_t *drive, struct request *rq, __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2)); } -static void tx4939ide_output_data_swap(ide_drive_t *drive, struct request *rq, +static void tx4939ide_output_data_swap(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long port = drive->hwif->io_ports.data_addr; @@ -589,11 +476,11 @@ static const struct ide_tp_ops tx4939ide_tp_ops = { .exec_command = ide_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, - .set_irq = ide_set_irq, - + .dev_select = ide_dev_select, .tf_load = tx4939ide_tf_load, - .tf_read = tx4939ide_tf_read, + .tf_read = ide_tf_read, .input_data = tx4939ide_input_data_swap, .output_data = tx4939ide_output_data_swap, @@ -601,20 +488,13 @@ static const struct ide_tp_ops tx4939ide_tp_ops = { #else /* __LITTLE_ENDIAN */ -static void tx4939ide_tf_load(ide_drive_t *drive, ide_task_t *task) -{ - ide_tf_load(drive, task); - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - tx4939ide_tf_load_fixup(drive, task); -} - static const struct ide_tp_ops tx4939ide_tp_ops = { .exec_command = ide_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, - .set_irq = ide_set_irq, - + .dev_select = ide_dev_select, .tf_load = tx4939ide_tf_load, .tf_read = ide_tf_read, @@ -634,16 +514,15 @@ static const struct ide_port_ops tx4939ide_port_ops = { static const struct ide_dma_ops tx4939ide_dma_ops = { .dma_host_set = tx4939ide_dma_host_set, .dma_setup = tx4939ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, .dma_end = tx4939ide_dma_end, .dma_test_irq = tx4939ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, - .dma_timeout = ide_dma_timeout, + .dma_timer_expiry = ide_dma_sff_timer_expiry, .dma_sff_read_status = tx4939ide_dma_sff_read_status, }; -static const struct ide_port_info tx4939ide_port_info __initdata = { +static const struct ide_port_info tx4939ide_port_info __initconst = { .init_hwif = tx4939ide_init_hwif, .init_dma = tx4939ide_init_dma, .port_ops = &tx4939ide_port_ops, @@ -658,8 +537,7 @@ static const struct ide_port_info tx4939ide_port_info __initdata = { static int __init tx4939ide_probe(struct platform_device *pdev) { - hw_regs_t hw; - hw_regs_t *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_hw hw, *hws[] = { &hw }; struct ide_host *host; struct resource *res; int irq, ret; @@ -673,10 +551,10 @@ static int __init tx4939ide_probe(struct platform_device *pdev) return -ENODEV; if (!devm_request_mem_region(&pdev->dev, res->start, - res->end - res->start + 1, "tx4938ide")) + resource_size(res), "tx4938ide")) return -EBUSY; mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start, - res->end - res->start + 1); + resource_size(res)); if (!mapbase) return -EBUSY; memset(&hw, 0, sizeof(hw)); @@ -702,7 +580,7 @@ static int __init tx4939ide_probe(struct platform_device *pdev) hw.dev = &pdev->dev; pr_info("TX4939 IDE interface (base %#lx, irq %d)\n", mapbase, irq); - host = ide_host_alloc(&tx4939ide_port_info, hws); + host = ide_host_alloc(&tx4939ide_port_info, hws, 1); if (!host) return -ENOMEM; /* use extra_base for base address of the all registers */ @@ -746,18 +624,7 @@ static struct platform_driver tx4939ide_driver = { .resume = tx4939ide_resume, }; -static int __init tx4939ide_init(void) -{ - return platform_driver_probe(&tx4939ide_driver, tx4939ide_probe); -} - -static void __exit tx4939ide_exit(void) -{ - platform_driver_unregister(&tx4939ide_driver); -} - -module_init(tx4939ide_init); -module_exit(tx4939ide_exit); +module_platform_driver_probe(tx4939ide_driver, tx4939ide_probe); MODULE_DESCRIPTION("TX4939 internal IDE driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c index 0608d41fb6d..3aa0fea0f3d 100644 --- a/drivers/ide/umc8672.c +++ b/drivers/ide/umc8672.c @@ -104,10 +104,11 @@ static void umc_set_speeds(u8 speeds[]) speeds[0], speeds[1], speeds[2], speeds[3]); } -static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void umc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif, *mate = hwif->mate; + ide_hwif_t *mate = hwif->mate; unsigned long uninitialized_var(flags); + const u8 pio = drive->pio_mode - XFER_PIO_0; printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", drive->name, pio, pio_to_umc[pio]); @@ -127,7 +128,7 @@ static const struct ide_port_ops umc8672_port_ops = { .set_pio_mode = umc_set_pio_mode, }; -static const struct ide_port_info umc8672_port_info __initdata = { +static const struct ide_port_info umc8672_port_info __initconst = { .name = DRV_NAME, .chipset = ide_umc8672, .port_ops = &umc8672_port_ops, @@ -159,7 +160,7 @@ static int __init umc8672_probe(void) return ide_legacy_device_add(&umc8672_port_info, 0); } -static int probe_umc8672; +static bool probe_umc8672; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); @@ -170,9 +171,9 @@ static int __init umc8672_init(void) goto out; if (umc8672_probe() == 0) - return 0;; + return 0; out: - return -ENODEV;; + return -ENODEV; } module_init(umc8672_init); diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index fecc0e03c3f..01464f1e233 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -6,7 +6,7 @@ * vt8235, vt8237, vt8237a * * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007 Bartlomiej Zolnierkiewicz + * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz * * Based on the work of: * Michel Aubry @@ -14,7 +14,7 @@ * Andre Hedrick * * Documentation: - * Obsolete device documentation publically available from via.com.tw + * Obsolete device documentation publicly available from via.com.tw * Current device documentation available under NDA only */ @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> @@ -54,6 +55,11 @@ #define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */ #define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */ #define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */ +#define VIA_SATA_PATA 0x80 /* SATA/PATA combined configuration */ + +enum { + VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */ +}; /* * VIA SouthBridge chips. @@ -67,10 +73,13 @@ static struct via_isa_bridge { u8 udma_mask; u8 flags; } via_isa_bridges[] = { - { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, @@ -91,6 +100,7 @@ static struct via_isa_bridge { { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { NULL } }; @@ -136,30 +146,45 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; - default: return; } - pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t); + /* Set UDMA unless device is not UDMA capable */ + if (vdev->via_config->udma_mask) { + u8 udma_etc; + + pci_read_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, &udma_etc); + + /* clear transfer mode bit */ + udma_etc &= ~0x20; + + if (timing->udma) { + /* preserve 80-wire cable detection bit */ + udma_etc &= 0x10; + udma_etc |= t; + } + + pci_write_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, udma_etc); + } } /** * via_set_drive - configure transfer mode + * @hwif: port * @drive: Drive to set up - * @speed: desired speed * * via_set_drive() computes timing values configures the chipset to * a desired transfer mode. It also can be called by upper layers. */ -static void via_set_drive(ide_drive_t *drive, const u8 speed) +static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; ide_drive_t *peer = ide_get_pair_dev(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); struct via82cxxx_dev *vdev = host->host_priv; struct ide_timing t, p; unsigned int T, UT; + const u8 speed = drive->dma_mode; T = 1000000000 / via_clock; @@ -174,7 +199,7 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed) ide_timing_compute(drive, speed, &t, T, UT); if (peer) { - ide_timing_compute(peer, peer->current_speed, &p, T, UT); + ide_timing_compute(peer, peer->pio_mode, &p, T, UT); ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } @@ -183,22 +208,24 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed) /** * via_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * A callback from the upper layers for PIO-only tuning. */ -static void via_set_pio_mode(ide_drive_t *drive, const u8 pio) +static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { - via_set_drive(drive, XFER_PIO_0 + pio); + drive->dma_mode = drive->pio_mode; + via_set_drive(hwif, drive); } static struct via_isa_bridge *via_config_find(struct pci_dev **isa) { struct via_isa_bridge *via_config; - for (via_config = via_isa_bridges; via_config->id; via_config++) + for (via_config = via_isa_bridges; + via_config->id != PCI_DEVICE_ID_VIA_ANON; via_config++) if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(via_config->flags & VIA_BAD_ID), via_config->id, NULL))) { @@ -267,7 +294,7 @@ static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u) * and initialize its drive independent registers. */ -static unsigned int init_chipset_via82cxxx(struct pci_dev *dev) +static int init_chipset_via82cxxx(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct via82cxxx_dev *vdev = host->host_priv; @@ -361,6 +388,9 @@ static u8 via82cxxx_cable_detect(ide_hwif_t *hwif) if (via_cable_override(pdev)) return ATA_CBL_PATA40_SHORT; + if ((vdev->via_config->flags & VIA_SATA_PATA) && hwif->channel == 0) + return ATA_CBL_SATA; + if ((vdev->via_80w >> hwif->channel) & 1) return ATA_CBL_PATA80; else @@ -373,7 +403,7 @@ static const struct ide_port_ops via_port_ops = { .cable_detect = via82cxxx_cable_detect, }; -static const struct ide_port_info via82cxxx_chipset __devinitdata = { +static const struct ide_port_info via82cxxx_chipset = { .name = DRV_NAME, .init_chipset = init_chipset_via82cxxx, .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, @@ -386,7 +416,7 @@ static const struct ide_port_info via82cxxx_chipset __devinitdata = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int via_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct pci_dev *isa = NULL; struct via_isa_bridge *via_config; @@ -401,11 +431,6 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i * Find the ISA bridge and check we know what it is. */ via_config = via_config_find(&isa); - if (!via_config->id) { - printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n", - pci_name(dev)); - return -ENODEV; - } /* * Print the boot message. @@ -432,24 +457,20 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i if (via_clock < 20000 || via_clock > 50000) { printk(KERN_WARNING DRV_NAME ": User given PCI clock speed " "impossible (%d), using 33 MHz instead.\n", via_clock); - printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want " - "to assume 80-wire cable.\n"); via_clock = 33333; } - if (idx == 0) - d.host_flags |= IDE_HFLAG_NO_AUTODMA; - else + if (idx == 1) d.enablebits[1].reg = d.enablebits[0].reg = 0; + else + d.host_flags |= IDE_HFLAG_NO_AUTODMA; + + if (idx == VIA_IDFLAG_SINGLE) + d.host_flags |= IDE_HFLAG_SINGLE; if ((via_config->flags & VIA_NO_UNMASK) == 0) d.host_flags |= IDE_HFLAG_UNMASK_IRQS; -#ifdef CONFIG_PPC_CHRP - if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos) - d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS; -#endif - d.udma_mask = via_config->udma_mask; vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); @@ -468,7 +489,7 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i return rc; } -static void __devexit via_remove(struct pci_dev *dev) +static void via_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct via82cxxx_dev *vdev = host->host_priv; @@ -481,7 +502,9 @@ static const struct pci_device_id via_pci_tbl[] = { { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6415), 1 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, { 0, }, }; @@ -491,7 +514,7 @@ static struct pci_driver via_pci_driver = { .name = "VIA_IDE", .id_table = via_pci_tbl, .probe = via_init_one, - .remove = __devexit_p(via_remove), + .remove = via_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; @@ -509,6 +532,6 @@ static void __exit via_ide_exit(void) module_init(via_ide_init); module_exit(via_ide_exit); -MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick"); +MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz, Michel Aubry, Jeff Garzik, Andre Hedrick"); MODULE_DESCRIPTION("PCI driver module for VIA IDE"); MODULE_LICENSE("GPL"); |