aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/sl82c105.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/sl82c105.c')
-rw-r--r--drivers/ide/sl82c105.c87
1 files changed, 42 insertions, 45 deletions
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 6297956507c..8755df3330a 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -10,7 +10,7 @@
* with the timing registers setup.
* -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
*
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2006-2007,2009 MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*/
@@ -24,13 +24,6 @@
#define DRV_NAME "sl82c105"
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(arg) printk arg
-#else
-#define DBG(fmt,...)
-#endif
/*
* SL82C105 PCI config register 0x40 bits.
*/
@@ -61,7 +54,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
if (cmd_off == 0)
cmd_off = 1;
- if (pio > 2 || ata_id_has_iordy(drive->id))
+ if (ide_pio_need_iordy(drive, pio))
iordy = 0x40;
return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
@@ -70,11 +63,13 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
/*
* Configure the chipset for PIO mode.
*/
-static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void sl82c105_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long timings = (unsigned long)ide_get_drivedata(drive);
int reg = 0x44 + drive->dn * 4;
u16 drv_ctrl;
+ const u8 pio = drive->pio_mode - XFER_PIO_0;
drv_ctrl = get_pio_timings(drive, pio);
@@ -82,8 +77,9 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
* Store the PIO timings so that we can restore them
* in case DMA will be turned off...
*/
- drive->drive_data &= 0xffff0000;
- drive->drive_data |= drv_ctrl;
+ timings &= 0xffff0000;
+ timings |= drv_ctrl;
+ ide_set_drivedata(drive, (void *)timings);
pci_write_config_word(dev, reg, drv_ctrl);
pci_read_config_word (dev, reg, &drv_ctrl);
@@ -96,13 +92,12 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
/*
* Configure the chipset for DMA mode.
*/
-static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sl82c105_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
+ unsigned long timings = (unsigned long)ide_get_drivedata(drive);
u16 drv_ctrl;
-
- DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
- drive->name, ide_xfer_verbose(speed)));
+ const u8 speed = drive->dma_mode;
drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
@@ -110,8 +105,19 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
* Store the DMA timings so that we can actually program
* them when DMA will be turned on...
*/
- drive->drive_data &= 0x0000ffff;
- drive->drive_data |= (unsigned long)drv_ctrl << 16;
+ timings &= 0x0000ffff;
+ timings |= (unsigned long)drv_ctrl << 16;
+ ide_set_drivedata(drive, (void *)timings);
+}
+
+static int sl82c105_test_irq(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
+
+ pci_read_config_dword(dev, 0x40, &val);
+
+ return (val & mask) ? 1 : 0;
}
/*
@@ -145,14 +151,15 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
u8 dma_cmd;
- printk("sl82c105: lost IRQ, resetting host\n");
+ printk(KERN_WARNING "sl82c105: lost IRQ, resetting host\n");
/*
* Check the raw interrupt from the drive.
*/
pci_read_config_dword(dev, 0x40, &val);
if (val & mask)
- printk("sl82c105: drive was requesting IRQ, but host lost it\n");
+ printk(KERN_INFO "sl82c105: drive was requesting IRQ, "
+ "but host lost it\n");
/*
* Was DMA enabled? If so, disable it - we're resetting the
@@ -161,7 +168,7 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
if (dma_cmd & 1) {
outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- printk("sl82c105: DMA was enabled\n");
+ printk(KERN_INFO "sl82c105: DMA was enabled\n");
}
sl82c105_reset_host(dev);
@@ -181,35 +188,28 @@ static void sl82c105_dma_start(ide_drive_t *drive)
struct pci_dev *dev = to_pci_dev(hwif->dev);
int reg = 0x44 + drive->dn * 4;
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
- pci_write_config_word(dev, reg, drive->drive_data >> 16);
+ pci_write_config_word(dev, reg,
+ (unsigned long)ide_get_drivedata(drive) >> 16);
sl82c105_reset_host(dev);
ide_dma_start(drive);
}
-static void sl82c105_dma_timeout(ide_drive_t *drive)
+static void sl82c105_dma_clear(ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name));
-
sl82c105_reset_host(dev);
- ide_dma_timeout(drive);
}
static int sl82c105_dma_end(ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
- int ret;
+ int ret = ide_dma_end(drive);
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
- ret = ide_dma_end(drive);
-
- pci_write_config_word(dev, reg, drive->drive_data);
+ pci_write_config_word(dev, reg,
+ (unsigned long)ide_get_drivedata(drive));
return ret;
}
@@ -223,8 +223,6 @@ static void sl82c105_resetproc(ide_drive_t *drive)
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 val;
- DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
-
pci_read_config_dword(dev, 0x40, &val);
val |= (CTRL_P1F16 | CTRL_P0F16);
pci_write_config_dword(dev, 0x40, val);
@@ -271,38 +269,37 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev)
* channel 0 here at least, but channel 1 has to be enabled by
* firmware or arch code. We still set both to 16 bits mode.
*/
-static unsigned int init_chipset_sl82c105(struct pci_dev *dev)
+static int init_chipset_sl82c105(struct pci_dev *dev)
{
u32 val;
- DBG(("init_chipset_sl82c105()\n"));
-
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
- return dev->irq;
+ return 0;
}
static const struct ide_port_ops sl82c105_port_ops = {
.set_pio_mode = sl82c105_set_pio_mode,
.set_dma_mode = sl82c105_set_dma_mode,
.resetproc = sl82c105_resetproc,
+ .test_irq = sl82c105_test_irq,
};
static const struct ide_dma_ops sl82c105_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = sl82c105_dma_start,
.dma_end = sl82c105_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = sl82c105_dma_lost_irq,
- .dma_timeout = sl82c105_dma_timeout,
+ .dma_timer_expiry = ide_dma_sff_timer_expiry,
+ .dma_clear = sl82c105_dma_clear,
.dma_sff_read_status = ide_dma_sff_read_status,
};
-static const struct ide_port_info sl82c105_chipset __devinitdata = {
+static const struct ide_port_info sl82c105_chipset = {
.name = DRV_NAME,
.init_chipset = init_chipset_sl82c105,
.enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
@@ -316,7 +313,7 @@ static const struct ide_port_info sl82c105_chipset __devinitdata = {
.mwdma_mask = ATA_MWDMA2,
};
-static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d = sl82c105_chipset;
u8 rev = sl82c105_bridge_revision(dev);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-06 16:22:19 +0000