diff options
Diffstat (limited to 'drivers/ide/siimage.c')
| -rw-r--r-- | drivers/ide/siimage.c | 73 |
1 files changed, 30 insertions, 43 deletions
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c index e4973cd1fba..6a1849bb476 100644 --- a/drivers/ide/siimage.c +++ b/drivers/ide/siimage.c @@ -32,7 +32,6 @@ * smarter code in libata. * * TODO: - * - IORDY fixes * - VDMA support */ @@ -230,20 +229,18 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive) /** * sil_set_pio_mode - set host controller for PIO mode + * @hwif: port * @drive: drive - * @pio: PIO mode number * * Load the timing settings for this device mode into the - * controller. If we are in PIO mode 3 or 4 turn on IORDY - * monitoring (bit 9). The TF timing is bits 31:16 + * controller. */ -static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) +static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); ide_drive_t *pair = ide_get_pair_dev(drive); u32 speedt = 0; @@ -251,6 +248,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) unsigned long addr = siimage_seldev(drive, 0x04); unsigned long tfaddr = siimage_selreg(hwif, 0x02); unsigned long base = (unsigned long)hwif->hwif_data; + const u8 pio = drive->pio_mode - XFER_PIO_0; u8 tf_pio = pio; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) @@ -260,7 +258,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) /* trim *taskfile* PIO to the slowest of the master/slave */ if (pair) { - u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); + u8 pair_pio = pair->pio_mode - XFER_PIO_0; if (pair_pio < tf_pio) tf_pio = pair_pio; @@ -276,31 +274,33 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) /* now set up IORDY */ speedp = sil_ioread16(dev, tfaddr - 2); speedp &= ~0x200; - if (pio > 2) - speedp |= 0x200; - sil_iowrite16(dev, speedp, tfaddr - 2); mode = sil_ioread8(dev, base + addr_mask); mode &= ~(unit ? 0x30 : 0x03); - mode |= unit ? 0x10 : 0x01; + + if (ide_pio_need_iordy(drive, pio)) { + speedp |= 0x200; + mode |= unit ? 0x10 : 0x01; + } + + sil_iowrite16(dev, speedp, tfaddr - 2); sil_iowrite8(dev, mode, base + addr_mask); } /** * sil_set_dma_mode - set host controller for DMA mode + * @hwif: port * @drive: drive - * @speed: DMA mode * * Tune the SiI chipset for the desired DMA mode. */ -static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sil_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long base = (unsigned long)hwif->hwif_data; u16 ultra = 0, multi = 0; @@ -310,6 +310,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) : (mmio ? 0xB4 : 0x80); unsigned long ma = siimage_seldev(drive, 0x08); unsigned long ua = siimage_seldev(drive, 0x0C); + const u8 speed = drive->dma_mode; scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); mode = sil_ioread8 (dev, base + addr_mask); @@ -337,24 +338,14 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) sil_iowrite16(dev, ultra, ua); } -/* returns 1 if dma irq issued, 0 otherwise */ -static int siimage_io_dma_test_irq(ide_drive_t *drive) +static int sil_test_irq(ide_hwif_t *hwif) { - ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 dma_altstat = 0; unsigned long addr = siimage_selreg(hwif, 1); + u8 val = sil_ioread8(dev, addr); - /* return 1 if INTR asserted */ - if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4) - return 1; - - /* return 1 if Device INTR asserted */ - pci_read_config_byte(dev, addr, &dma_altstat); - if (dma_altstat & 8) - return 0; /* return 1; */ - - return 0; + /* Return 1 if INTRQ asserted */ + return (val & 8) ? 1 : 0; } /** @@ -368,7 +359,6 @@ static int siimage_io_dma_test_irq(ide_drive_t *drive) static int siimage_mmio_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - unsigned long addr = siimage_selreg(hwif, 0x1); void __iomem *sata_error_addr = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET]; @@ -397,10 +387,6 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive) if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4) return 1; - /* return 1 if Device INTR asserted */ - if (readb((void __iomem *)addr) & 8) - return 0; /* return 1; */ - return 0; } @@ -409,7 +395,7 @@ static int siimage_dma_test_irq(ide_drive_t *drive) if (drive->hwif->host_flags & IDE_HFLAG_MMIO) return siimage_mmio_dma_test_irq(drive); else - return siimage_io_dma_test_irq(drive); + return ide_dma_test_irq(drive); } /** @@ -451,8 +437,8 @@ static int sil_sata_reset_poll(ide_drive_t *drive) static void sil_sata_pre_reset(ide_drive_t *drive) { if (drive->media == ide_disk) { - drive->special.b.set_geometry = 0; - drive->special.b.recalibrate = 0; + drive->special_flags &= + ~(IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE); } } @@ -560,7 +546,7 @@ static int init_chipset_siimage(struct pci_dev *dev) * extended PRD tables. For better SI3112 support use the libata driver */ -static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) +static void init_mmio_iops_siimage(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); @@ -660,7 +646,7 @@ static void sil_quirkproc(ide_drive_t *drive) * can get the iops right before using them. */ -static void __devinit init_iops_siimage(ide_hwif_t *hwif) +static void init_iops_siimage(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); @@ -694,6 +680,7 @@ static const struct ide_port_ops sil_pata_port_ops = { .set_pio_mode = sil_set_pio_mode, .set_dma_mode = sil_set_dma_mode, .quirkproc = sil_quirkproc, + .test_irq = sil_test_irq, .udma_filter = sil_pata_udma_filter, .cable_detect = sil_cable_detect, }; @@ -704,6 +691,7 @@ static const struct ide_port_ops sil_sata_port_ops = { .reset_poll = sil_sata_reset_poll, .pre_reset = sil_sata_pre_reset, .quirkproc = sil_quirkproc, + .test_irq = sil_test_irq, .udma_filter = sil_sata_udma_filter, .cable_detect = sil_cable_detect, }; @@ -731,7 +719,7 @@ static const struct ide_dma_ops sil_dma_ops = { .udma_mask = ATA_UDMA6, \ } -static const struct ide_port_info siimage_chipsets[] __devinitdata = { +static const struct ide_port_info siimage_chipsets[] = { /* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops), /* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops) }; @@ -745,8 +733,7 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = { * We then use the IDE PCI generic helper to do most of the work. */ -static int __devinit siimage_init_one(struct pci_dev *dev, - const struct pci_device_id *id) +static int siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id) { void __iomem *ioaddr = NULL; resource_size_t bar5 = pci_resource_start(dev, 5); @@ -802,7 +789,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev, return rc; } -static void __devexit siimage_remove(struct pci_dev *dev) +static void siimage_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); void __iomem *ioaddr = host->host_priv; @@ -834,7 +821,7 @@ static struct pci_driver siimage_pci_driver = { .name = "SiI_IDE", .id_table = siimage_pci_tbl, .probe = siimage_init_one, - .remove = __devexit_p(siimage_remove), + .remove = siimage_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; |
